Initial commitHEADmain

1 files changed, 24180 insertions, 0 deletions

diff --git a/MIBS/netapp/NETWORK-APPLIANCE-MIB b/MIBS/netapp/NETWORK-APPLIANCE-MIB
new file mode 100644
index 0000000..90ebdc3
--- /dev/null
+++ b/MIBS/netapp/NETWORK-APPLIANCE-MIB
@@ -0,0 +1,24180 @@
+	-- ======================================================== --
+	-- Network Appliance Custom MIB                             --
+	--                                                          --
+	-- This MIB contains only information specific to           --
+	-- Network Appliance products.  The Network Appliance       --
+	-- SNMP agent supports the information specified            --
+	-- in the RFC1213 MIB, but the specification of the         --
+	-- RFC1213 MIB is not included in this file.                --
+	-- =======================================================  --
+
+	-- Version 1.18, October 2004 (See NOTE below)
+
+	-- Copyright (c) 1995-2001 Network Appliance, Inc.
+	-- All rights reserved.
+
+	-- This Network Appliance SNMP Management Information Base
+	-- (Specification) embodies Network Appliance's confidential
+	-- and proprietary intellectual property.  Network Appliance
+	-- retains all title and ownership in the Specification,
+	-- including any revisions.
+
+	-- This Specification is supplied "AS IS," and Network Appliance
+	-- makes no warranty, either express or implied, as to the use,
+	-- operation, condition, or performance of the Specification.
+
+	-- NOTE:   Please maintain the format of the line above
+		-- containing the MIB's version number as:
+		--
+		-- Version <version #>, <Date> (See NOTE below)
+		--
+		-- This line is parsed during the release process
+		-- to extract the version of the MIB.
+
+
+	NETWORK-APPLIANCE-MIB DEFINITIONS ::= BEGIN
+
+	IMPORTS
+		enterprises, Counter, IpAddress, TimeTicks, Gauge
+			FROM RFC1155-SMI
+		PhysAddress, DisplayString
+			FROM RFC1213-MIB
+		TRAP-TYPE
+			FROM RFC-1215
+		OBJECT-TYPE
+			FROM RFC-1212;
+
+	--  This MIB module uses the extended OBJECT-TYPE macro as
+	--  defined in RFC-1212
+
+
+	--  MIB-II (same prefix as MIB-I)
+
+
+	-- the Network Appliance MIB
+
+	-- NetApp conventions
+
+	netapp OBJECT IDENTIFIER ::= { enterprises 789 }
+
+	-- the current netapp mib
+
+	netapp1	OBJECT IDENTIFIER ::= { netapp 1 }
+
+	-- 
+	-- This is the tree under which values for the sysObjectID
+	-- are allocated.
+	--
+
+	netappProducts OBJECT IDENTIFIER ::= { netapp 2 }
+
+	-- 
+	-- This is the tree under which values for the DataFabric Manager
+	-- are allocated. Those values are defined in separate mib file,
+	-- distributed with DataFabric Manager product.
+	--
+
+	netappDataFabricManager OBJECT IDENTIFIER ::= { netapp 3 }
+
+	-- 
+	-- This is the tree under which values for the NetApp Support Console
+	-- are allocated. Those values are defined in separate mib file,
+	-- distributed with the Support Console
+	--
+
+	netappSupportConsole OBJECT IDENTIFIER ::= { netapp 4 }
+
+	--
+	-- We distinguish between filers and NetCaches.
+	--
+
+	netappFiler	OBJECT IDENTIFIER ::= { netappProducts 1 }
+	netappNetCache	OBJECT IDENTIFIER ::= { netappProducts 2 }
+	netappClusteredFiler	OBJECT IDENTIFIER ::= { netappProducts 3 }
+
+	-- top-level netapp groups
+
+	product	OBJECT IDENTIFIER ::= { netapp1 1 }
+
+	sysStat	OBJECT IDENTIFIER ::= { netapp1 2 }
+
+	nfs	OBJECT IDENTIFIER ::= { netapp1 3 }
+
+	quota	OBJECT IDENTIFIER ::= { netapp1 4 }
+
+	filesys	OBJECT IDENTIFIER ::= { netapp1 5 }
+
+	raid	OBJECT IDENTIFIER ::= { netapp1 6 }
+
+	cifs	OBJECT IDENTIFIER ::= { netapp1 7 }
+
+	netcache      	OBJECT IDENTIFIER ::= { netapp1 8 }
+
+	snapmirror     	OBJECT IDENTIFIER ::= { netapp1 9 }
+
+	ndmp     	OBJECT IDENTIFIER ::= { netapp1 10 }
+
+	fabric     	OBJECT IDENTIFIER ::= { netapp1 11 }
+
+	dafs		OBJECT IDENTIFIER ::= { netapp1 12 }
+
+	vi		OBJECT IDENTIFIER ::= { netapp1 13 }
+
+	backup		OBJECT IDENTIFIER ::= { netapp1 14 }
+
+        vfiler          OBJECT IDENTIFIER ::= { netapp1 16 }
+
+	blocks		OBJECT IDENTIFIER ::= { netapp1 17 }
+
+	nfscache	OBJECT IDENTIFIER ::= { netapp1 18 }
+
+	snapvault     	OBJECT IDENTIFIER ::= { netapp1 19 }
+
+	ftpd		OBJECT IDENTIFIER ::= { netapp1 20 }
+
+	storage   	OBJECT IDENTIFIER ::= { netapp1 21 }
+
+	network		OBJECT IDENTIFIER ::= { netapp1 22 }
+
+	-- -- -- -- -- -- -- --
+	-- the product group --
+	-- -- -- -- -- -- -- --
+
+	productType	OBJECT-TYPE
+	SYNTAX		INTEGER {
+			    eisa-based(1),
+			    pci-based(2)
+	}
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The product type representing the target platform."
+	::= { product 1 }
+
+	productVersion	OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"Version String for the Software Running on
+			 this platform."
+	::= { product 2 }
+
+	productId	OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The System ID of this system."
+	::= { product 3 }
+
+	productVendor	OBJECT-TYPE
+	SYNTAX		INTEGER {
+			    netapp(1),
+			    dell(2),
+			    ibm(3)
+	}
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The vendor id of this system, indicating the company
+			that has supplied the product."
+	::= { product 4 }
+
+	productModel	OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The model name of the system.  Examples
+			 are FAS980 and FAS3050."
+	::= { product 5 }
+
+	productFirmwareVersion	OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"Version string for the Firmware running on
+			 this platform."
+	::= { product 6 }
+
+	productGuiUrl	OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The complete URL used to access the administrative GUI
+			 for a browser-based interface."
+	::= { product 7 }
+
+	productApiUrl	OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The complete URL used to access the administrative API
+			 for a programmatic interface."
+	::= { product 8 }
+	
+	productSerialNum  OBJECT-TYPE
+	SYNTAX		  DisplayString
+	ACCESS		  read-only
+	STATUS		  mandatory
+	DESCRIPTION
+			  "The product serial number. Returns unknown if it 
+			   cannot be determined."
+	::= { product 9 }
+
+	productPartnerSerialNum   OBJECT-TYPE
+	SYNTAX			  DisplayString
+	ACCESS			  read-only
+	STATUS			  mandatory
+	DESCRIPTION
+				  "The partner's serial number, not applicable
+				   if there is no partner, and unknown if it
+				   cannot be determined."
+	::= { product 10 }
+
+	productCPUArch  OBJECT-TYPE
+	SYNTAX		INTEGER {
+				x86(1),
+				alpha(2),
+				mips(3),
+				sparc(4)
+			}
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+	                "The CPU architecture type of this appliance"
+
+
+			
+        ::= { product 11 }
+
+	productTrapData	OBJECT-TYPE
+	SYNTAX			DisplayString
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"This returns a static string. This object is used
+			as a placeholder for enterprise traps."
+	::= { product 12 }
+
+	productMachineType	OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The machine type of the system.  Examples
+			 are FAS980 and FAS3050."
+	::= { product 13 }
+
+	-- -- -- -- -- -- -- --
+	-- the sysStat group --
+	-- -- -- -- -- -- -- --
+
+	cpu	OBJECT IDENTIFIER ::=	{ sysStat 1 }
+
+	misc	OBJECT IDENTIFIER ::=	{ sysStat 2 }
+
+	cf	OBJECT IDENTIFIER ::=	{ sysStat 3 }
+
+	environment OBJECT IDENTIFIER ::= { sysStat 4 }
+
+	nvram	OBJECT IDENTIFIER ::= { sysStat 5 }
+
+	cp	OBJECT IDENTIFIER ::= { sysStat 6 }
+
+	autosupport OBJECT IDENTIFIER ::= { sysStat 7 }
+
+
+	-- the cpu group for sysStat
+
+	cpuUpTime		OBJECT-TYPE
+	SYNTAX			TimeTicks
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The time (in hundredths of a second) that the
+			 CPU has been up since the last boot."
+	::= { cpu 1 }
+
+	cpuBusyTime		OBJECT-TYPE
+	SYNTAX			TimeTicks
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The time (in hundredths of a second) that the
+			 CPU has been doing useful work since the last
+			 boot."
+	::= { cpu 2 }
+
+	cpuBusyTimePerCent	OBJECT-TYPE
+	SYNTAX			INTEGER (0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The percent of time that the CPU has been doing
+			 useful work since the last time a client requested
+			 the cpuBusyTimePerCent."
+	::= { cpu 3 }
+
+	cpuIdleTime		OBJECT-TYPE
+	SYNTAX			TimeTicks
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The time (in hundredths of a second) that the
+			 CPU has been idle since the last boot."
+	::= { cpu 4 }
+
+	cpuIdleTimePerCent	OBJECT-TYPE
+	SYNTAX			INTEGER (0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The percent of time that the CPU has been idle
+			 since the last time a client requested the
+			 cpuBusyTimePerCent."
+	::= { cpu 5 }
+
+	cpuCount		OBJECT-TYPE
+	SYNTAX			INTEGER (1..2)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of CPUs in the system."
+	
+	::= { cpu 6 }
+
+        cpuSwitchInvocations	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION	
+			"The number of sk_switch invocations."
+	::= { cpu 7 }
+
+	cpuContextSwitches	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION		
+			"The number of hardware context switches."
+	::= { cpu 8 }
+
+	cpuInterrupts		OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION		
+			"The number of interrupts during a CP."
+	::= { cpu 9 }
+
+
+	cpuNonCPInterrupts	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION		
+			"The number of interrupts not during a CP."
+	::= { cpu 10 }
+
+	cpuCPInterruptPercent	OBJECT-TYPE
+	SYNTAX			INTEGER (0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION	
+			" The percentage of time handling CP interrupts."
+	::= { cpu 11 }
+
+        cpuNonCPInterruptPercent OBJECT-TYPE
+	SYNTAX			INTEGER (0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION	
+			" The percentage of time handling non-cp interrupts."
+        ::= { cpu 12 }
+	
+        cpuTotalDomainSwitches OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION	
+			" The total number of Domain Switches."
+        ::= { cpu 13 }
+
+ 	-- the misc group for sysStat
+
+	-- miscNfsOps is DEPRECATED; use miscHighNfsOps
+	--    and miscLowNfsOps
+
+	miscNfsOps		OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The total number of Server side NFS calls since
+			 the last boot"
+	::= { misc 1 }
+
+
+	-- miscNetRcvdKB is DEPRECATED; use miscHighNetRcvdBytes
+	--  and miscLowNetRcvdBytes
+
+	miscNetRcvdKB		OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The total number of KBytes received on all the
+			 network interfaces, since the last boot."
+	::= { misc 2 }
+
+	-- miscNetSentKB is DEPRECATED; use miscHighNetSentBytes
+	--  and miscLowNetSentBytes
+
+	miscNetSentKB		OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The total number of KBytes transmitted on all the
+			 network interfaces, since the last boot."
+	::= { misc 3 }
+
+	miscGlobalStatus	OBJECT-TYPE
+	SYNTAX			INTEGER {
+					other(1),
+					unknown(2),
+					ok(3),
+					nonCritical(4),
+					critical(5),
+					nonRecoverable(6)
+				}
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"This indicates the overall status of the appliance.
+			The algorithm to determine the value uses both
+			hardware status (e.g. the number of failed fans) and
+			volume status (e.g. number of volumes that are full).
+			The algorithm is subject to change in future releases,
+			but the range of values will not change."
+	::= { misc 4 }
+
+	miscHighNfsOps		OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The total number of Server side NFS calls since
+			 the last boot.  This object returns the most
+			 significant 32 bits of the 64 bit unsigned integer."
+	::= { misc 5 }
+
+	miscLowNfsOps		OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The total number of Server side NFS calls since
+			 the last boot.  This object returns the least
+			 significant 32 bits of the 64 bit unsigned integer."
+
+	::= { misc 6 }
+
+	miscHighCifsOps		OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The total number of Server side CIFS calls since
+			 the last boot.  This object returns the most
+			 significant 32 bits of the 64 bit unsigned integer."
+	::= { misc 7 }
+
+	miscLowCifsOps		OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The total number of Server side CIFS calls since
+			 the last boot.  This object returns the least
+			 significant 32 bits of the 64 bit unsigned integer."
+
+	::= { misc 8 }
+
+
+	miscHighHttpOps		OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The total number of HTTP operations received
+			 since the last boot.  This object returns the most
+			 significant 32 bits of the 64 bit unsigned integer."
+	::= { misc 9 }
+
+	miscLowHttpOps		OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The total number of HTTP operations received
+			 since the last boot.  This object returns the least
+			 significant 32 bits of the 64 bit unsigned integer."
+
+	::= { misc 10 }
+
+
+	miscHighNetRcvdBytes	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The total number of bytes received on all the
+			 network interfaces, since the last boot.  This
+			 object returns the most significant 32 bits
+			 of the 64 bit unsigned integer."
+	::= { misc 11 }
+
+	miscLowNetRcvdBytes	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The total number of bytes received on all the
+			 network interfaces, since the last boot.  This
+			 object returns the least significant 32 bits
+			 of the 64 bit unsigned integer."
+	::= { misc 12 }
+
+
+	miscHighNetSentBytes	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The total number of bytes transmitted on all the
+			 network interfaces, since the last boot.  This
+			 object returns the most significant 32 bits
+			 of the 64 bit unsigned integer."
+	::= { misc 13 }
+
+
+	miscLowNetSentBytes	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The total number of bytes transmitted on all the
+			 network interfaces, since the last boot.  This
+			 object returns the least significant 32 bits
+			 of the 64 bit unsigned integer."
+
+	::= { misc 14 }
+
+	miscHighDiskReadBytes	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The total number of bytes read from disk
+			 since the last boot.  This object returns
+			 the most significant 32 bits of the 64 bit unsigned 
+			 integer."
+
+	::= { misc 15 }
+
+	miscLowDiskReadBytes	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The total number of bytes read from disk since
+			 the last boot.  This object returns the least
+			 significant 32 bits of the 64 bit unsigned integer."
+	::= { misc 16 }
+
+
+	miscHighDiskWriteBytes	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The total number of bytes written to disk
+			 since the last boot.  This object returns
+			 the most significant 32 bits of the 64 bit unsigned
+			 integer."
+	::= { misc 17 }
+
+	miscLowDiskWriteBytes	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The total number of bytes written to disk since
+			 the last boot.  This object returns the least
+			 significant 32 bits of the 64 bit unsigned integer."
+	::= { misc 18 }
+
+
+
+	miscHighTapeReadBytes	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The total number of bytes read from tape
+			 since the last boot.  This object returns
+			 the most significant 32 bits of the 64 bit unsigned 
+			 integer."
+	::= { misc 19 }
+
+	miscLowTapeReadBytes	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The total number of bytes read from tape since
+			 the last boot.  This object returns the least
+			 significant 32 bits of the 64 bit unsigned integer."
+	::= { misc 20 }
+
+
+	miscHighTapeWriteBytes	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The total number of bytes written to tape
+			 since the last boot.  This object returns
+			 the most significant 32 bits of the 64 bit unsigned 
+			 integer."
+	::= { misc 21 }
+
+	miscLowTapeWriteBytes	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The total number of bytes written to tape since
+			 the last boot.  This object returns the least
+			 significant 32 bits of the 64 bit unsigned integer."
+	::= { misc 22 }
+
+	miscCacheAge		OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Age in minutes of the oldest read-only blocks
+			 in the buffer cache.  This indicates how fast
+			 read operations are cycling through system
+			 memory; when the appliance is reading very
+			 large files (larger than the machine's memory
+			 size), buffer cache age will be very low."
+	::= { misc 23 }
+
+	miscCorrectedMachineChecks	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Number of corrected machine checks since
+			the last boot."
+
+	::= { misc 24 }
+
+	miscGlobalStatusMessage	OBJECT-TYPE
+	SYNTAX			DisplayString
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"A string describing the global status,
+			including a description of the condition (if
+			any) that caused the status to be anything
+			other than ok(3)."
+	::= { misc 25 }
+
+	miscWindowsSetupWizardVersion	OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The version number of Windows Setup Wizard 
+			required to configure the appliance.  Windows
+			Setup Wizard with a version number lower than 
+			this integer is not capable of configuring the 
+			appliance."
+	::= { misc 26 }
+
+	-- the Clustered Failover group
+
+	cfSettings		OBJECT-TYPE
+	SYNTAX			INTEGER {
+					notConfigured(1),
+					enabled(2),
+					disabled(3),
+					takeoverByPartnerDisabled(4),
+					thisNodeDead(5)
+				}
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"Clustered Failover configuration settings.
+				 The value notConfigured(1) indicates that the
+				 cluster is not licensed. The thisNodeDead(5)
+				 setting indicates that this node has been 
+				 taken over."
+	::= { cf 1 }
+
+	cfState			OBJECT-TYPE
+	SYNTAX			INTEGER {
+					dead(1),
+					canTakeover(2),
+					cannotTakeover(3),
+					takeover(4)
+				}
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"Clustered Failover state."
+	::= { cf 2 }
+
+	cfCannotTakeoverCause	OBJECT-TYPE
+	SYNTAX			INTEGER {
+					ok(1),
+					unknownReason(2),
+					disabledByOperator(3),
+					interconnectOffline(4),
+					disabledByPartner(5),
+					takeoverFailed(6)
+				}
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The reason this node cannot takeover its
+				 partner"
+	::= { cf 3 }
+
+	cfPartnerStatus		OBJECT-TYPE
+	SYNTAX			INTEGER {
+					maybeDown(1),
+					ok(2),
+					dead(3)
+				}
+	ACCESS			read-only
+	STATUS		        mandatory
+	DESCRIPTION
+				"This is the status last returned by the
+				 Clustered Failover partner."
+	::= { cf 4 }
+
+	cfPartnerLastStatusUpdate	OBJECT-TYPE
+	SYNTAX				TimeTicks
+	ACCESS				read-only
+	STATUS				mandatory
+	DESCRIPTION
+				"If non-zero, the absolute time of the last
+				 update from the Clustered Failover partner."
+	::= { cf 5 }
+
+	cfPartnerName		OBJECT-TYPE
+	SYNTAX			DisplayString
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"Hostname for Clustered Failover partner."
+	::= { cf 6 }
+
+	cfPartnerSysid		OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"System ID for Clustered Failover partner."
+	::= { cf 7 }
+	
+	cfInterconnectStatus	OBJECT-TYPE
+	SYNTAX			INTEGER {
+					notPresent(1),
+					down(2),
+					partialFailure(3),
+					up(4)
+				}
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The current status of the interconnect.
+				 The partialFailure(3) status indicates that
+				 one of the links in the interconnect hardware
+				 is down." 
+	::= { cf 8 }
+
+	-- the environment group for sysStat
+
+	envOverTemperature	OBJECT-TYPE
+	SYNTAX			INTEGER {
+					no(1),
+					yes(2)
+				}
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"An indication of whether the hardware is
+			 currently operating outside of its recommended
+			 temperature range.  The hardware will shutdown
+			 if the temperature exceeds critical thresholds."
+
+	::= { environment 1 }
+
+	envFailedFanCount	OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Count of the number of chassis fans which
+			 are not operating within the recommended
+			 RPM range."
+
+	::= { environment 2 }
+
+	envFailedFanMessage	OBJECT-TYPE
+	SYNTAX			DisplayString
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Text message describing the current condition of
+			 chassis fans.  This is useful only if
+			 envFailedFanCount is not zero."
+
+	::= { environment 3 }
+
+
+	envFailedPowerSupplyCount	OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Count of the number of power supplies which
+			 are in degraded mode."
+
+	::= { environment 4 }
+
+	envFailedPowerSupplyMessage	OBJECT-TYPE
+	SYNTAX			DisplayString
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Text message describing the state of any
+			 power supplies which are currently degraded.
+			 This is useful only if envFailedPowerSupplyCount
+			 is not zero."
+
+	::= { environment 5 }
+
+	-- -- -- -- -- -- --
+	-- the nvram group for sysStat
+
+	nvramBatteryStatus	OBJECT-TYPE
+	SYNTAX			INTEGER {
+					ok(1),
+					partiallyDischarged(2),
+					fullyDischarged(3),
+					notPresent(4),
+					nearEndOfLife(5),
+					atEndOfLife(6),
+					unknown(7),
+					overCharged(8),
+					fullyCharged(9)
+				}
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"An indication of the current status of the
+			 NVRAM battery or batteries.  Batteries which
+			 are fully or partially discharged may not
+			 fully protect the system during a crash.
+
+			 The end-of-life status values are based on
+			 the manufacturer's recommended life for the
+			 batteries."
+
+	::= { nvram 1 }
+
+	-- -- -- -- -- -- --
+	-- the cp group for sysStat
+
+	cpTime			OBJECT-TYPE
+	SYNTAX			TimeTicks
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The time (in hundredths of a second) since boot
+			 during which the system has had a consistency point
+			 (cp) operation in progress."
+	::= { cp 1 }
+
+	cpFromTimerOps		OBJECT-TYPE
+	SYNTAX			Counter	
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of consistency point operations since boot
+			 that were caused by timer."
+	::= { cp 2 }
+
+	cpFromSnapshotOps	OBJECT-TYPE
+	SYNTAX			Counter	
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of consistency point operations since boot
+			 that were caused by snapshot operation."
+	::= { cp 3 }
+
+	cpFromLowWaterOps	OBJECT-TYPE
+	SYNTAX			Counter	
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of consistency point operations since boot
+			 that were caused by low water mark."
+	::= { cp 4 }
+
+	cpFromHighWaterOps	OBJECT-TYPE
+	SYNTAX			Counter	
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of consistency point operations since boot
+			 that were caused by high water mark."
+	::= { cp 5 }
+
+	cpFromLogFullOps	OBJECT-TYPE
+	SYNTAX			Counter	
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of consistency point operations since boot
+			 that were caused by nv-log full."
+	::= { cp 6 }
+
+	cpFromCpOps		OBJECT-TYPE
+	SYNTAX			Counter	
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of back to back consistency point 
+			operations since boot."
+	::= { cp 7 }
+
+	cpTotalOps		OBJECT-TYPE
+	SYNTAX			Counter	
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The total number of consistency point operations
+			 since boot."
+	::= { cp 8 }
+
+	cpFromFlushOps		OBJECT-TYPE
+	SYNTAX			Counter	
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of consistency point operations since boot
+			that were caused by flushing unlogged write data."
+	::= { cp 9 }
+
+	cpFromSyncOps		OBJECT-TYPE
+	SYNTAX			Counter	
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of consistency point operations since boot
+			that were caused by file system sync requests."
+	::= { cp 10 }
+
+	cpFromLowVbufOps	OBJECT-TYPE
+	SYNTAX			Counter	
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of consistency point operations since boot
+			that were caused by low virtual buffers."
+	::= { cp 11 }
+
+	cpFromCpDeferredOps	OBJECT-TYPE
+	SYNTAX			Counter	
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of back to back consistency point
+			operations since boot that were deferred."
+	::= { cp 12 }
+
+	cpFromLowDatavecsOps	OBJECT-TYPE
+	SYNTAX			Counter	
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of consistency point operations since boot
+			that were caused by low datavecs."
+	::= { cp 13 }
+
+	-- -- -- -- -- -- --
+	-- the autosupport group for sysStat
+
+	autosupportStatus	    OBJECT-TYPE
+	SYNTAX			    INTEGER {
+					    ok(1),
+					    smtpFailure(2),
+					    postFailure(3),
+					    smtp-postFailure(4),
+					    unknown(5)
+				    }
+	ACCESS			    read-only
+	STATUS			    mandatory
+	DESCRIPTION
+			"An indication of the current status of
+			 autosupport on the appliance.  describes
+			 the success or failure of most recent 
+			 attempts to send autosupports."
+	
+	::= { autosupport 1 }
+
+	autosupportStatusMessage    OBJECT-TYPE
+	SYNTAX			    DisplayString
+	ACCESS			    read-only
+	STATUS                      mandatory
+	DESCRIPTION
+			"A string describing the autosupport status,
+			including a description of the condition (if
+			any) that caused the status to be anything
+			other than ok(1)."
+
+	::= { autosupport 2 }
+
+	autosupportSuccessfulSends  OBJECT-TYPE
+	SYNTAX			    Counter
+	ACCESS			    read-only
+	STATUS                      mandatory
+	DESCRIPTION
+			"Count of the number of autosupport messages
+			 successfully sent since the last reset."
+	
+	::= { autosupport 3 }
+
+	autosupportFailedSends      OBJECT-TYPE
+	SYNTAX			    Counter
+	ACCESS                      read-only
+	STATUS                      mandatory
+	DESCRIPTION
+	                 "Count of the number of autosupport messages
+			 not sent successfully since the last reset."
+
+	::= { autosupport 4 }
+
+
+	-- -- -- -- -- -- --
+	-- the NFS group  --
+	-- -- -- -- -- -- --
+
+	curNfs		OBJECT IDENTIFIER ::= { nfs 1 }
+
+	totNfs		OBJECT IDENTIFIER ::= { nfs 2 }
+
+	nfsOptions	OBJECT IDENTIFIER ::= { nfs 3 }
+
+
+	-- the curNfs group
+
+		-- this group contains NFS statistics since the last
+		-- time the statistics were cleared
+
+	rpcServ		OBJECT IDENTIFIER ::= { curNfs 1 }
+
+	nfsServ		OBJECT IDENTIFIER ::= { curNfs 2 }
+
+	nfsPerClient	OBJECT IDENTIFIER ::= { curNfs 3 }
+
+
+
+	-- the rpcServ group
+
+ 	rpcCalls	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The total number of RPC calls received, since
+			 the last time the statistics were cleared."
+	::= { rpcServ 1 }
+
+	rpcBadCalls	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The total number of calls rejected by the RPC
+			 layer, since the last time the statistics were
+			 cleared."
+	::= { rpcServ 2 }
+
+	rpcNullRecvs	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of times an RPC call was not available
+			 when it was thought to be received, since the
+			 last time the statistics were cleared."
+	::= { rpcServ 3 }
+
+	rpcBadLens	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of RPC calls received with a length
+			 shorter than a minimum-sized RPC call, since the
+			 last time the statistics were cleared."
+	::= { rpcServ 4 }
+
+	rpcServXDRCalls	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of RPC calls received whose header
+			 could not be XDR decoded, since the last time
+			 the statistics were cleared."
+	::= { rpcServ 5 }
+
+ 	rcpTcpCalls	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The total number of RPC calls received for the
+			 TCP protocol, since the last time the statistics
+			 were cleared."
+	::= { rpcServ 6 }
+
+	rcpTcpBadCalls	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The total number of calls rejected by the RPC
+			 layer for the TCP protocol, since the last 
+			 time the statistics were cleared."
+	::= { rpcServ 7 }
+
+	rcpTcpNullRecvs	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of times an RPC call for the TCP 
+			 protocol was not available when it was thought 
+			 to be received, since the last time the 
+			 statistics were cleared."
+	::= { rpcServ 8 }
+
+	rcpTcpBadLens	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of RPC calls for the TCP protocol
+			 received with a length shorter than a minimum-sized 
+			 RPC call, since the last time the statistics 
+			 were cleared."
+	::= { rpcServ 9 }
+
+	rcpTcpServXDRCalls	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of RPC calls for the TCP protocol
+			 received whose header could not be XDR decoded, 
+			 since the last time the statistics were cleared."
+	::= { rpcServ 10 }
+
+ 	rpcUdpCalls	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The total number of RPC calls received for the
+			 UDP protocol, since the last time the statistics
+			 were cleared."
+	::= { rpcServ 11 }
+
+	rpcUdpBadCalls	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The total number of calls rejected by the RPC
+			 layer for the UDP protocol, since the last 
+			 time the statistics were cleared."
+	::= { rpcServ 12 }
+
+	rpcUdpNullRecvs	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of times an RPC call for the UDP 
+			 protocol was not available when it was thought 
+			 to be received, since the last time the 
+			 statistics were cleared."
+	::= { rpcServ 13 }
+
+	rpcUdpBadLens	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of RPC calls for the UDP protocol
+			 received with a length shorter than a minimum-sized 
+			 RPC call, since the last time the statistics 
+			 were cleared."
+	::= { rpcServ 14 }
+
+	rpcUdpServXDRCalls	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of RPC calls for the UDP protocol
+			 received whose header could not be XDR decoded, 
+			 since the last time the statistics were cleared."
+	::= { rpcServ 15 }
+
+
+	-- the nfsServ group
+
+	nfsCalls	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The total number of NFS calls received, since
+			 the last time the statistics were cleared."
+	::= { nfsServ 1 }
+
+	nfsServBadCalls	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The total number of received NFS calls rejected,
+			 since the last time the statistics were cleared."
+	::= { nfsServ 2 }
+
+	nfsV2		OBJECT IDENTIFIER ::= { nfsServ 3 }
+
+	nfsV3		OBJECT IDENTIFIER ::= { nfsServ 4 }
+
+	replyCache	OBJECT IDENTIFIER ::= { nfsServ 5 }
+
+	nfsrwStats	OBJECT IDENTIFIER ::= { nfsServ 6 }
+
+
+	-- the nfsV2 group
+
+		-- this group contains statistics for NFS
+		-- Version 2 calls processed since the last
+		-- time the statistics were cleared
+
+	v2Calls		OBJECT IDENTIFIER ::= { nfsV2 1 }
+
+	v2Percent	OBJECT IDENTIFIER ::= { nfsV2 2 }
+
+	v2CachedCalls	OBJECT IDENTIFIER ::= { nfsV2 3 }
+
+	v2CachedPerCent	OBJECT IDENTIFIER ::= { nfsV2 4 }
+
+
+
+	-- the v2Calls group
+
+		-- this group contains statistics for the number of
+		-- calls received for each NFS Version 2 procedure
+		-- since the last time the statistics were cleared
+
+	v2cNulls	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_NULL (Do Nothing) procedure,
+			 since the last time the statistics were cleared."
+	::= { v2Calls 1 }
+
+	v2cGetattrs	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_GETATTR (Get File Attributes)
+			 procedure, since the last time the statistics
+			 were cleared."
+	::= { v2Calls 2 }
+
+	v2cSetattrs	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_SETATTR (Set File Attributes)
+			 procedure, since the last time the statistics
+			 were cleared."
+	::= { v2Calls 3 }
+
+	v2cRoots	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_ROOT (Get Filesystem Root)
+			 procedure, since the last time the statistics
+			 were cleared."
+	::= { v2Calls 4 }
+
+	v2cLookups	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_LOOKUP (Look Up File Name)
+			 procedure, since the last time the statistics
+			 were cleared."
+	::= { v2Calls 5 }
+
+	v2cReadlinks	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_READLINK (Read From Symbolic
+			 Link) procedure, since the last time the
+			 statistics were cleared."
+	::= { v2Calls 6 }
+
+	v2cReads	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_READ (Read From File)
+			 procedure, since the last time the statistics
+			 were cleared."
+	::= { v2Calls 7 }
+
+	v2cWrcaches	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_WRITECACHE (Write to Cache)
+			 procedure, since the last time the statistics
+			 were cleared."
+	::= { v2Calls 8 }
+
+	v2cWrites	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_WRITE (Write to File)
+			 procedure, since the last time the statistics
+			 were cleared."
+	::= { v2Calls 9 }
+
+	v2cCreates	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_CREATE (Create File)
+			 procedure, since the last time the statistics
+			 were cleared."
+	::= { v2Calls 10 }
+
+	v2cRemoves	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_REMOVE (Remove File)
+			 procedure, since the last time the statistics
+			 were cleared."
+	::= { v2Calls 11 }
+
+	v2cRenames	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_RENAME (Rename File)
+			 procedure, since the last time the statistics
+			 were cleared."
+	::= { v2Calls 12 }
+
+	v2cLinks	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_LINK (Create Link to File)
+			 procedure, since the last time the statistics
+			 were cleared."
+	::= { v2Calls 13 }
+
+	v2cSymlinks	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_SYMLINK (Create Symbolic Link)
+			 procedure, since the last time the statistics
+			 were cleared."
+	::= { v2Calls 14 }
+
+	v2cMkdirs	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_MKDIR (Create Directory)
+			 procedure, since the last time the statistics
+			 were cleared."
+	::= { v2Calls 15 }
+
+	v2cRmdirs	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_RMDIR (Remove Directory)
+			 procedure, since the last time the statistics
+			 were cleared."
+	::= { v2Calls 16 }
+
+	v2cReaddirs	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_READDIR (Read From Directory)
+			 procedure, since the last time the statistics
+			 were cleared."
+	::= { v2Calls 17 }
+
+	v2cStatfss	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_STATFS (Get Filesystem
+			 Attributes) procedure, since the last time
+			 the statistics were cleared."
+	::= { v2Calls 18 }
+
+
+
+	-- the v2Percent group
+
+		-- this group contains statistics for the number of
+		-- calls received for each NFS Version 2 procedure,
+		-- as a percentage of total NFS calls received,
+		-- since the last time the statistics were cleared
+
+	v2pNulls	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_NULL (Do Nothing) procedure
+			 as a percentage of total NFS calls received,
+			 since the last time the statistics were cleared."
+	::= { v2Percent 1 }
+
+	v2pGetattrs	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_GETATTR (Get File Attributes)
+			 procedure as a percentage of total NFS calls
+			 received, since the last time the statistics
+			 were cleared."
+	::= { v2Percent 2 }
+
+	v2pSetattrs	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_SETATTR (Set File Attributes)
+			 procedure as a percentage of total NFS calls
+			 received, since the last time the statistics
+			 were cleared."
+	::= { v2Percent 3 }
+
+	v2pRoots	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_ROOT (Get Filesystem Root)
+			 procedure as a percentage of total NFS calls
+			 received, since the last time the statistics
+			 were cleared."
+	::= { v2Percent 4 }
+
+	v2pLookups	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_LOOKUP (Look Up File Name)
+			 procedure as a percentage of total NFS calls
+			 received, since the last time the statistics
+			 were cleared."
+	::= { v2Percent 5 }
+
+	v2pReadlinks	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_READLINK (Read From Symbolic
+			 Link) procedure as a percentage of total NFS
+			 calls received, since the last time the
+			 statistics were cleared."
+	::= { v2Percent 6 }
+
+	v2pReads	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_READ (Read From File)
+			 procedure as a percentage of total NFS calls
+			 received, since the last time the statistics
+			 were cleared."
+	::= { v2Percent 7 }
+
+	v2pWrcaches	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_WRITECACHE (Write to Cache)
+			 procedure as a percentage of total NFS calls
+			 received, since the last time the statistics
+			 were cleared."
+	::= { v2Percent 8 }
+
+	v2pWrites	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_WRITE (Write to File)
+			 procedure as a percentage of total NFS calls
+			 received, since the last time the statistics
+			 were cleared."
+	::= { v2Percent 9 }
+
+	v2pCreates	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_CREATE (Create File)
+			 procedure as a percentage of total NFS calls
+			 received, since the last time the statistics
+			 were cleared."
+	::= { v2Percent 10 }
+
+	v2pRemoves	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_REMOVE (Remove File)
+			 procedure as a percentage of total NFS calls
+			 received, since the last time the statistics
+			 were cleared."
+	::= { v2Percent 11 }
+
+	v2pRenames	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_RENAME (Rename File)
+			 procedure as a percentage of total NFS calls
+			 received, since the last time the statistics
+			 were cleared."
+	::= { v2Percent 12 }
+
+	v2pLinks	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_LINK (Create Link to File)
+			 procedure as a percentage of total NFS calls
+			 received, since the last time the statistics
+			 were cleared."
+	::= { v2Percent 13 }
+
+	v2pSymlinks	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_SYMLINK (Create Symbolic Link)
+			 procedure as a percentage of total NFS calls
+			 received, since the last time the statistics
+			 were cleared."
+	::= { v2Percent 14 }
+
+	v2pMkdirs	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_MKDIR (Create Directory)
+			 procedure as a percentage of total NFS calls
+			 received, since the last time the statistics
+			 were cleared."
+	::= { v2Percent 15 }
+
+	v2pRmdirs	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_RMDIR (Remove Directory)
+			 procedure as a percentage of total NFS calls
+			 received, since the last time the statistics
+			 were cleared."
+	::= { v2Percent 16 }
+
+	v2pReaddirs	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_READDIR (Read From Directory)
+			 procedure as a percentage of total NFS calls
+			 received, since the last time the statistics
+			 were cleared."
+	::= { v2Percent 17 }
+
+	v2pStatfss	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_STATFS (Get Filesystem
+			 Attributes) procedure as a percentage of
+			 total NFS calls received, since the last
+			 time the statistics were cleared."
+	::= { v2Percent 18 }
+
+
+
+	-- the v2CachedCalls group
+
+		-- this group contains statistics for the number of
+		-- calls received for each NFS Version 2 procedure,
+		-- that did not result in the filesystem blocking to
+		-- read from disk, since the last time the statistics
+		-- were cleared
+
+	v2ccNulls	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_NULL (Do Nothing) procedure,
+			 that did not result in the filesystem
+			 blocking to read from disk, since the last
+			 time the statistics were cleared."
+	::= { v2CachedCalls 1 }
+
+	v2ccGetattrs	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_GETATTR (Get File Attributes)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk, since
+			 the last time the statistics were cleared."
+	::= { v2CachedCalls 2 }
+
+	v2ccSetattrs	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_SETATTR (Set File Attributes)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk, since
+			 the last time the statistics were cleared."
+	::= { v2CachedCalls 3 }
+
+	v2ccRoots	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_ROOT (Get Filesystem Root)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk, since
+			 the last time the statistics were cleared."
+	::= { v2CachedCalls 4 }
+
+	v2ccLookups	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_LOOKUP (Look Up File Name)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk, since
+			 the last time the statistics were cleared."
+	::= { v2CachedCalls 5 }
+
+	v2ccReadlinks	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_READLINK (Read From Symbolic
+			 Link) procedure, that did not result in the
+			 filesystem blocking to read from disk, since
+			 the last time the statistics were cleared."
+	::= { v2CachedCalls 6 }
+
+	v2ccReads	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_READ (Read From File)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk, since
+			 the last time the statistics were cleared."
+	::= { v2CachedCalls 7 }
+
+	v2ccWrcaches	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_WRITECACHE (Write to Cache)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk, since
+			 the last time the statistics were cleared."
+	::= { v2CachedCalls 8 }
+
+	v2ccWrites	OBJECT-TYPE
+	SYNTAX		Counter ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_WRITE (Write to File)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk, since
+			 the last time the statistics were cleared."
+	::= { v2CachedCalls 9 }
+
+	v2ccCreates	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_CREATE (Create File)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk, since
+			 the last time the statistics were cleared."
+	::= { v2CachedCalls 10 }
+
+	v2ccRemoves	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_REMOVE (Remove File)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk, since
+			 the last time the statistics were cleared."
+	::= { v2CachedCalls 11 }
+
+	v2ccRenames	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_RENAME (Rename File)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk, since
+			 the last time the statistics were cleared."
+	::= { v2CachedCalls 12 }
+
+	v2ccLinks	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_LINK (Create Link to File)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk, since
+			 the last time the statistics were cleared."
+	::= { v2CachedCalls 13 }
+
+	v2ccSymlinks	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_SYMLINK (Create Symbolic Link)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk, since
+			 the last time the statistics were cleared."
+	::= { v2CachedCalls 14 }
+
+	v2ccMkdirs	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_MKDIR (Create Directory)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk, since
+			 the last time the statistics were cleared."
+	::= { v2CachedCalls 15 }
+
+	v2ccRmdirs	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_RMDIR (Remove Directory)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk, since
+			 the last time the statistics were cleared."
+	::= { v2CachedCalls 16 }
+
+	v2ccReaddirs	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_READDIR (Read From Directory)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk, since
+			 the last time the statistics were cleared."
+	::= { v2CachedCalls 17 }
+
+	v2ccStatfss	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_STATFS (Get Filesystem
+			 Attributes) procedure, that did not result
+			 in the filesystem blocking to read from disk,
+			 since the last time the statistics were cleared."
+	::= { v2CachedCalls 18 }
+
+
+
+	-- the v2CachedPerCent group
+
+		-- this group contains statistics for the number of
+		-- calls received for each NFS Version 2 procedure,
+		-- that did not result in the filesystem blocking to
+		-- read from disk, as a percentage of the total
+		-- number of calls received for that procedure,
+		-- since the last time the statistics were cleared
+
+	v2cpNulls	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_NULL (Do Nothing) procedure,
+			 that did not result in the filesystem
+			 blocking to read from disk, as a percentage
+			 of the total number of calls received for
+			 this procedure, since the last time the
+			 statistics were cleared."
+	::= { v2CachedPerCent 1 }
+
+	v2cpGetattrs	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_GETATTR (Get File Attributes)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk, as a
+			 percentage of the total number of calls
+			 received for this procedure, since the last
+			 time the statistics were cleared."
+	::= { v2CachedPerCent 2 }
+
+	v2cpSetattrs	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_SETATTR (Set File Attributes)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk, as a
+			 percentage of the total number of calls
+			 received for this procedure, since the last
+			 time the statistics were cleared."
+	::= { v2CachedPerCent 3 }
+
+	v2cpRoots	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_ROOT (Get Filesystem Root)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk, as a
+			 percentage of the total number of calls
+			 received for this procedure, since the last
+			 time the statistics were cleared."
+	::= { v2CachedPerCent 4 }
+
+	v2cpLookups	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_LOOKUP (Look Up File Name)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk, as a
+			 percentage of the total number of calls
+			 received for this procedure, since the last
+			 time the statistics were cleared."
+	::= { v2CachedPerCent 5 }
+
+	v2cpReadlinks	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_READLINK (Read From Symbolic
+			 Link) procedure, that did not result in the
+			 filesystem blocking to read from disk, as a
+			 percentage of the total number of calls
+			 received for this procedure, since the last
+			 time the statistics were cleared."
+	::= { v2CachedPerCent 6 }
+
+	v2cpReads	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_READ (Read From File)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk, as a
+			 percentage of the total number of calls
+			 received for this procedure, since the last
+			 time the statistics were cleared."
+	::= { v2CachedPerCent 7 }
+
+	v2cpWrcaches	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_WRITECACHE (Write to Cache)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk, as a
+			 percentage of the total number of calls
+			 received for this procedure, since the last
+			 time the statistics were cleared."
+	::= { v2CachedPerCent 8 }
+
+	v2cpWrites	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_WRITE (Write to File)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk, as a
+			 percentage of the total number of calls
+			 received for this procedure, since the last
+			 time the statistics were cleared."
+	::= { v2CachedPerCent 9 }
+
+	v2cpCreates	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_CREATE (Create File)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk, as a
+			 percentage of the total number of calls
+			 received for this procedure, since the last
+			 time the statistics were cleared."
+	::= { v2CachedPerCent 10 }
+
+	v2cpRemoves	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_REMOVE (Remove File)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk, as a
+			 percentage of the total number of calls
+			 received for this procedure, since the last
+			 time the statistics were cleared."
+	::= { v2CachedPerCent 11 }
+
+	v2cpRenames	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_RENAME (Rename File)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk, as a
+			 percentage of the total number of calls
+			 received for this procedure, since the last
+			 time the statistics were cleared."
+	::= { v2CachedPerCent 12 }
+
+	v2cpLinks	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_LINK (Create Link to File)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk, as a
+			 percentage of the total number of calls
+			 received for this procedure, since the last
+			 time the statistics were cleared."
+	::= { v2CachedPerCent 13 }
+
+	v2cpSymlinks	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_SYMLINK (Create Symbolic
+			 Link) procedure, that did not result in the
+			 filesystem blocking to read from disk, as a
+			 percentage of the total number of calls
+			 received for this procedure, since the last
+			 time the statistics were cleared."
+	::= { v2CachedPerCent 14 }
+
+	v2cpMkdirs	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_MKDIR (Create Directory)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk, as a
+			 percentage of the total number of calls
+			 received for this procedure, since the last
+			 time the statistics were cleared."
+	::= { v2CachedPerCent 15 }
+
+	v2cpRmdirs	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_RMDIR (Remove Directory)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk, as a
+			 percentage of the total number of calls
+			 received for this procedure, since the last
+			 time the statistics were cleared."
+	::= { v2CachedPerCent 16 }
+
+	v2cpReaddirs	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_READDIR (Read From Directory)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk, as a
+			 percentage of the total number of calls
+			 received for this procedure, since the last
+			 time the statistics were cleared."
+	::= { v2CachedPerCent 17 }
+
+	v2cpStatfss	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_STATFS (Get Filesystem
+			 Attributes) procedure, that did not result
+			 in the filesystem blocking to read from
+			 disk, as a percentage of the total number
+			 of calls received for this procedure, since
+			 the last time the statistics were cleared."
+	::= { v2CachedPerCent 18 }
+
+
+
+	-- the nfsV3 group
+
+		-- this group contains statistics for NFS
+		-- Version 3 calls processed since the last
+		-- time the statistics were cleared
+
+	v3Calls		OBJECT IDENTIFIER ::= { nfsV3 1 }
+
+	v3Percent	OBJECT IDENTIFIER ::= { nfsV3 2 }
+
+	v3CachedCalls	OBJECT IDENTIFIER ::= { nfsV3 3 }
+
+	v3CachedPerCent	OBJECT IDENTIFIER ::= { nfsV3 4 }
+
+
+
+	-- the v3Calls group
+
+		-- this group contains statistics for the number of
+		-- calls received for each NFS Version 3 procedure
+		-- since the last time the statistics were cleared
+
+	v3cNulls	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_NULL (Do Nothing) procedure,
+			 since the last time the statistics were cleared."
+	::= { v3Calls 1 }
+
+	v3cGetattrs	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_GETATTR (Get File Attributes)
+			 procedure, since the last time the statistics
+			 were cleared."
+	::= { v3Calls 2 }
+
+	v3cSetattrs	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_SETATTR (Set File Attributes)
+			 procedure, since the last time the statistics
+			 were cleared."
+	::= { v3Calls 3 }
+
+	v3cLookups	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_LOOKUP (Lookup Filename)
+			 procedure, since the last time the statistics
+			 were cleared."
+	::= { v3Calls 4 }
+
+	v3cAccesss	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_ACCESS (Check Access Permission)
+			 procedure, since the last time the statistics
+			 were cleared."
+	::= { v3Calls 5 }
+
+	v3cReadlinks	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_READLINK (Read from Symbolic
+			 Link) procedure, since the last time the
+			 statistics were cleared."
+	::= { v3Calls 6 }
+
+	v3cReads	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_READ (Read From File)
+			 procedure, since the last time the statistics
+			 were cleared."
+	::= { v3Calls 7 }
+
+	v3cWrites	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_WRITE (Write to File)
+			 procedure, since the last time the statistics
+			 were cleared."
+	::= { v3Calls 8 }
+
+	v3cCreates	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_CREATE (Create a File)
+			 procedure, since the last time the statistics
+			 were cleared."
+	::= { v3Calls 9 }
+
+	v3cMkdirs	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_MKDIR (Create a Directory)
+			 procedure, since the last time the statistics
+			 were cleared."
+	::= { v3Calls 10 }
+
+	v3cSymlinks	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_SYMLINK (Create a Symbolic
+			 Link) procedure, since the last time the
+			 statistics were cleared."
+	::= { v3Calls 11 }
+
+	v3cMknods	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_MKNOD (Create a Special
+			 Device) procedure, since the last time the
+			 statistics were cleared."
+	::= { v3Calls 12 }
+
+	v3cRemoves	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_REMOVE (Remove a File)
+			 procedure, since the last time the statistics
+			 were cleared."
+	::= { v3Calls 13 }
+
+	v3cRmdirs	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_RMDIR (Remove a Directory)
+			 procedure, since the last time the statistics
+			 were cleared."
+	::= { v3Calls 14 }
+
+	v3cRenames	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_RENAME (Rename a File or
+			 Directory) procedure, since the last time
+			 the statistics were cleared."
+	::= { v3Calls 15 }
+
+	v3cLinks	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_LINK (Create Link to an
+			 Object) procedure, since the last time the
+			 statistics were cleared."
+	::= { v3Calls 16 }
+
+	v3cReaddirs	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_READDIR (Read From Directory)
+			 procedure, since the last time the statistics
+			 were cleared."
+	::= { v3Calls 17 }
+
+	v3cReaddirPluss	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_READDIRPLUS (Extended Read
+			 from Directory) procedure, since the last
+			 time the statistics were cleared."
+	::= { v3Calls 18 }
+
+	v3cFsstats	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_FSSTAT (Get Dynamic File
+			 System Information) procedure, since the
+			 last time the statistics were cleared."
+	::= { v3Calls 19 }
+
+	v3cFsinfos	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_FSINFO (Get Static File System
+			 Information) procedure, since the last time
+			 the statistics were cleared."
+	::= { v3Calls 20 }
+
+	v3cPathconfs	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_PATHCONF (Retrieve POSIX
+			 Information) procedure, since the last time
+			 the statistics were cleared."
+	::= { v3Calls 21 }
+
+	v3cCommits	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_COMMIT (Commit Cached Data on
+			 a Server to Stable Storage) procedure, since
+			 the last time the statistics were cleared."
+	::= { v3Calls 22 }
+
+
+
+	-- the v3Percent group
+
+		-- this group contains statistics for the number of
+		-- calls received for each NFS Version 3 procedure,
+		-- as a percentage of total NFS calls received,
+		-- since the last time the statistics were cleared
+
+	v3pNulls	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_NULL (Do Nothing) procedure,
+			 as a percentage of the total NFS calls
+			 received, since the last time the statistics
+			 were cleared."
+	::= { v3Percent 1 }
+
+	v3pGetattrs	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_GETATTR (Get File Attributes)
+			 procedure, as a percentage of the total NFS
+			 calls received, since the last time the
+			 statistics were cleared."
+	::= { v3Percent 2 }
+
+	v3pSetattrs	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_SETATTR (Set File Attributes)
+			 procedure, as a percentage of the total NFS
+			 calls received, since the last time the
+			 statistics were cleared."
+	::= { v3Percent 3 }
+
+	v3pLookups	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_LOOKUP (Lookup Filename)
+			 procedure, as a percentage of the total NFS
+			 calls received, since the last time the
+			 statistics were cleared."
+	::= { v3Percent 4 }
+
+	v3pAccesss	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_ACCESS (Check Access
+			 Permission) procedure, as a percentage of
+			 the total NFS calls received, since the
+			 last time the statistics were cleared."
+	::= { v3Percent 5 }
+
+	v3pReadlinks	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_READLINK (Read from Symbolic
+			 Link) procedure, as a percentage of the total
+			 NFS calls received, since the last time the
+			 statistics were cleared."
+	::= { v3Percent 6 }
+
+	v3pReads	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_READ (Read From File)
+			 procedure, as a percentage of the total NFS
+			 calls received, since the last time the
+			 statistics were cleared."
+	::= { v3Percent 7 }
+
+	v3pWrites	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_WRITE (Write to File)
+			 procedure, as a percentage of the total NFS
+			 calls received, since the last time the
+			 statistics were cleared."
+	::= { v3Percent 8 }
+
+	v3pCreates	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_CREATE (Create a File)
+			 procedure, as a percentage of the total NFS
+			 calls received, since the last time the
+			 statistics were cleared."
+	::= { v3Percent 9 }
+
+	v3pMkdirs	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_MKDIR (Create a Directory)
+			 procedure, as a percentage of the total NFS
+			 calls received, since the last time the
+			 statistics were cleared."
+	::= { v3Percent 10 }
+
+	v3pSymlinks	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_SYMLINK (Create a Symbolic
+			 Link) procedure, as a percentage of the total
+			 NFS calls received, since the last time the
+			 statistics were cleared."
+	::= { v3Percent 11 }
+
+	v3pMknods	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_MKNOD (Create a Special
+			 Device) procedure, as a percentage of the
+			 total NFS calls received, since the last
+			 time the statistics were cleared."
+	::= { v3Percent 12 }
+
+	v3pRemoves	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_REMOVE (Remove a File)
+			 procedure, as a percentage of the total NFS
+			 calls received, since the last time the
+			 statistics were cleared."
+	::= { v3Percent 13 }
+
+	v3pRmdirs	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_RMDIR (Remove a Directory)
+			 procedure, as a percentage of the total NFS
+			 calls received, since the last time the
+			 statistics were cleared."
+	::= { v3Percent 14 }
+
+	v3pRenames	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_RENAME (Rename a File or
+			 Directory) procedure, as a percentage of
+			 the total NFS calls received, since the
+			 last time the statistics were cleared."
+	::= { v3Percent 15 }
+
+	v3pLinks	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_LINK (Create Link to an
+			 Object) procedure, as a percentage of
+			 the total NFS calls received, since the
+			 last time the statistics were cleared."
+	::= { v3Percent 16 }
+
+	v3pReaddirs	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_READDIR (Read From Directory)
+			 procedure, as a percentage of the total NFS
+			 calls received, since the last time the
+			 statistics were cleared."
+	::= { v3Percent 17 }
+
+	v3pReaddirPluss	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_READDIRPLUS (Extended Read
+			 from Directory) procedure, as a percentage
+			 of the total NFS calls received, since the
+			 last time the statistics were cleared."
+	::= { v3Percent 18 }
+
+	v3pFsstats	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_FSSTAT (Get Dynamic File
+			 System Information) procedure, as a percentage
+			 of the total NFS calls received, since the
+			 last time the statistics were cleared."
+	::= { v3Percent 19 }
+
+	v3pFsinfos	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_FSINFO (Get Static File System
+			 Information) procedure, as a percentage of the
+			 total NFS calls received, since the last time
+			 the statistics were cleared."
+	::= { v3Percent 20 }
+
+	v3pPathconfs	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_PATHCONF (Retrieve POSIX
+			 Information) procedure, as a percentage of the
+			 total NFS calls received, since the last time
+			 the statistics were cleared."
+	::= { v3Percent 21 }
+
+	v3pCommits	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_COMMIT (Commit Cached Data on
+			 a Server to Stable Storage) procedure, as a
+			 percentage of the total NFS calls received,
+			 since the last time the statistics were cleared."
+	::= { v3Percent 22 }
+
+
+
+	-- the v3CachedCalls group
+
+		-- this group contains statistics for the number of
+		-- calls received for each NFS Version 3 procedure,
+		-- that did not result in the filesystem blocking to
+		-- read from disk, since the last time the statistics
+		-- were cleared
+
+	v3ccNulls	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_NULL (Do Nothing) procedure,
+			 that did not result in the filesystem
+			 blocking to read from disk, since the last
+			 time the statistics were cleared."
+	::= { v3CachedCalls 1 }
+
+	v3ccGetattrs	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_GETATTR (Get File Attributes)
+			 procedure, that did not result in the filesystem
+			 blocking to read from disk, since the last
+			 time the statistics were cleared."
+	::= { v3CachedCalls 2 }
+
+	v3ccSetattrs	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_SETATTR (Set File Attributes)
+			 procedure, that did not result in the filesystem
+			 blocking to read from disk, since the last
+			 time the statistics were cleared."
+	::= { v3CachedCalls 3 }
+
+	v3ccLookups	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_LOOKUP (Lookup Filename)
+			 procedure, that did not result in the filesystem
+			 blocking to read from disk, since the last
+			 time the statistics were cleared."
+	::= { v3CachedCalls 4 }
+
+	v3ccAccesss	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_ACCESS (Check Access Permission)
+			 procedure, that did not result in the filesystem
+			 blocking to read from disk, since the last
+			 time the statistics were cleared."
+	::= { v3CachedCalls 5 }
+
+	v3ccReadlinks	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_READLINK (Read from Symbolic
+			 Link) procedure, that did not result in the
+			 filesystem blocking to read from disk, since
+			 the last time the statistics were cleared."
+	::= { v3CachedCalls 6 }
+
+	v3ccReads	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_READ (Read From File)
+			 procedure, that did not result in the filesystem
+			 blocking to read from disk, since the last
+			 time the statistics were cleared."
+	::= { v3CachedCalls 7 }
+
+	v3ccWrites	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_WRITE (Write to File)
+			 procedure, that did not result in the filesystem
+			 blocking to read from disk, since the last
+			 time the statistics were cleared."
+	::= { v3CachedCalls 8 }
+
+	v3ccCreates	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_CREATE (Create a File)
+			 procedure, that did not result in the filesystem
+			 blocking to read from disk, since the last
+			 time the statistics were cleared."
+	::= { v3CachedCalls 9 }
+
+	v3ccMkdirs	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_MKDIR (Create a Directory)
+			 procedure, that did not result in the filesystem
+			 blocking to read from disk, since the last
+			 time the statistics were cleared."
+	::= { v3CachedCalls 10 }
+
+	v3ccSymlinks	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_SYMLINK (Create a Symbolic
+			 Link) procedure, that did not result in the
+			 filesystem blocking to read from disk, since
+			 the last time the statistics were cleared."
+	::= { v3CachedCalls 11 }
+
+	v3ccMknods	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_MKNOD (Create a Special
+			 Device) procedure, that did not result in the
+			 filesystem blocking to read from disk, since
+			 the last time the statistics were cleared."
+	::= { v3CachedCalls 12 }
+
+	v3ccRemoves	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_REMOVE (Remove a File)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk, since
+			 the last time the statistics were cleared."
+	::= { v3CachedCalls 13 }
+
+	v3ccRmdirs	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_RMDIR (Remove a Directory)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk, since
+			 the last time the statistics were cleared."
+	::= { v3CachedCalls 14 }
+
+	v3ccRenames	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_RENAME (Rename a File or
+			 Directory) procedure, that did not result in
+			 the filesystem blocking to read from disk, since
+			 the last time the statistics were cleared."
+	::= { v3CachedCalls 15 }
+
+	v3ccLinks	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_LINK (Create Link to an
+			 Object) procedure, that did not result in
+			 the filesystem blocking to read from disk, since
+			 the last time the statistics were cleared."
+	::= { v3CachedCalls 16 }
+
+	v3ccReaddirs	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_READDIR (Read From
+			 Directory) procedure, that did not result in
+			 the filesystem blocking to read from disk, since
+			 the last time the statistics were cleared."
+	::= { v3CachedCalls 17 }
+
+	v3ccReaddirPluss OBJECT-TYPE
+	SYNTAX		 Counter
+	ACCESS		 read-only
+	STATUS		 mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_READDIRPLUS (Extended Read
+			 from Directory) procedure, that did not result in
+			 the filesystem blocking to read from disk, since
+			 the last time the statistics were cleared."
+	::= { v3CachedCalls 18 }
+
+	v3ccFsstats	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_FSSTAT (Get Dynamic File
+			 System Information) procedure, that did not
+			 result in the filesystem blocking to read
+			 from disk, since the last time the statistics
+			 were cleared."
+	::= { v3CachedCalls 19 }
+
+	v3ccFsinfos	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_FSINFO (Get Static File
+			 System Information) procedure, that did not
+			 result in the filesystem blocking to read
+			 from disk, since the last time the statistics
+			 were cleared."
+	::= { v3CachedCalls 20 }
+
+	v3ccPathconfs	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_PATHCONF (Retrieve POSIX
+			 Information) procedure, that did not result
+			 in the filesystem blocking to read from disk,
+			 since the last time the statistics were cleared."
+	::= { v3CachedCalls 21 }
+
+	v3ccCommits	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_COMMIT (Commit Cached Data on
+			 a Server to Stable Storage) procedure, that did
+			 not result in the filesystem blocking to read
+			 from disk, since the last time the statistics
+			 were cleared."
+	::= { v3CachedCalls 22 }
+
+
+
+	-- the v3CachedPerCent group
+
+		-- this group contains statistics for the number of
+		-- calls received for each NFS Version 3 procedure,
+		-- that did not result in the filesystem blocking to
+		-- read from disk, as a percentage of the total
+		-- number of calls received for that procedure,
+		-- since the last time the statistics were cleared
+
+	v3cpNulls	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_NULL (Do Nothing) procedure,
+			 that did not result in the filesystem
+			 blocking to read from disk, as a percentage
+			 of the total number of calls received for
+			 this procedure, since the last time the
+			 statistics were cleared."
+	::= { v3CachedPerCent 1 }
+
+	v3cpGetattrs	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_GETATTR (Get File Attributes)
+			 procedure, that did not result in the filesystem
+			 blocking to read from disk, as a percentage
+			 of the total number of calls received for
+			 this procedure, since the last time the
+			 statistics were cleared."
+	::= { v3CachedPerCent 2 }
+
+	v3cpSetattrs	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_SETATTR (Set File Attributes)
+			 procedure, that did not result in the filesystem
+			 blocking to read from disk, as a percentage
+			 of the total number of calls received for
+			 this procedure, since the last time the
+			 statistics were cleared."
+	::= { v3CachedPerCent 3 }
+
+	v3cpLookups	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_LOOKUP (Lookup Filename)
+			 procedure, that did not result in the filesystem
+			 blocking to read from disk, as a percentage
+			 of the total number of calls received for
+			 this procedure, since the last time the
+			 statistics were cleared."
+	::= { v3CachedPerCent 4 }
+
+	v3cpAccesss	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_ACCESS (Check Access Permission)
+			 procedure, that did not result in the filesystem
+			 blocking to read from disk, as a percentage
+			 of the total number of calls received for
+			 this procedure, since the last time the
+			 statistics were cleared."
+	::= { v3CachedPerCent 5 }
+
+	v3cpReadlinks	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_READLINK (Read from Symbolic
+			 Link) procedure, that did not result in the
+			 filesystem blocking to read from disk, as a
+			 percentage of the total number of calls
+			 received for this procedure, since the last
+			 time the statistics were cleared."
+	::= { v3CachedPerCent 6 }
+
+	v3cpReads	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_READ (Read From File)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk, as a
+			 percentage of the total number of calls
+			 received for this procedure, since the last
+			 time the statistics were cleared."
+	::= { v3CachedPerCent 7 }
+
+	v3cpWrites	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_WRITE (Write to File)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk, as a
+			 percentage of the total number of calls
+			 received for this procedure, since the last
+			 time the statistics were cleared."
+	::= { v3CachedPerCent 8 }
+
+	v3cpCreates	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_CREATE (Create a File)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk, as a
+			 percentage of the total number of calls
+			 received for this procedure, since the last
+			 time the statistics were cleared."
+	::= { v3CachedPerCent 9 }
+
+	v3cpMkdirs	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_MKDIR (Create a Directory)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk, as a
+			 percentage of the total number of calls
+			 received for this procedure, since the last
+			 time the statistics were cleared."
+	::= { v3CachedPerCent 10 }
+
+	v3cpSymlinks	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_SYMLINK (Create a Symbolic
+			 Link) procedure, that did not result in the
+			 filesystem blocking to read from disk, as a
+			 percentage of the total number of calls
+			 received for this procedure, since the last
+			 time the statistics were cleared."
+	::= { v3CachedPerCent 11 }
+
+	v3cpMknods	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_MKNOD (Create a Special
+			 Device) procedure, that did not result in the
+			 filesystem blocking to read from disk, as a
+			 percentage of the total number of calls
+			 received for this procedure, since the last
+			 time the statistics were cleared."
+	::= { v3CachedPerCent 12 }
+
+	v3cpRemoves	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_REMOVE (Remove a File)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk, as a
+			 percentage of the total number of calls
+			 received for this procedure, since the last
+			 time the statistics were cleared."
+	::= { v3CachedPerCent 13 }
+
+	v3cpRmdirs	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_RMDIR (Remove a Directory)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk, as a
+			 percentage of the total number of calls
+			 received for this procedure, since the last
+			 time the statistics were cleared."
+	::= { v3CachedPerCent 14 }
+
+	v3cpRenames	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_RENAME (Rename a File or
+			 Directory) procedure, that did not result in
+			 the filesystem blocking to read from disk,
+			 as a percentage of the total number of calls
+			 received for this procedure, since the last
+			 time the statistics were cleared."
+	::= { v3CachedPerCent 15 }
+
+	v3cpLinks	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_LINK (Create Link to an
+			 Object) procedure, that did not result in
+			 the filesystem blocking to read from disk,
+			 as a percentage of the total number of calls
+			 received for this procedure, since the last
+			 time the statistics were cleared."
+	::= { v3CachedPerCent 16 }
+
+	v3cpReaddirs	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_READDIR (Read From Directory)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk, as a
+			 percentage of the total number of calls
+			 received for this procedure, since the last
+			 time the statistics were cleared."
+	::= { v3CachedPerCent 17 }
+
+	v3cpReaddirPluss OBJECT-TYPE
+	SYNTAX		 INTEGER (0..100)
+	ACCESS		 read-only
+	STATUS		 mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_READDIRPLUS (Extended Read
+			 from Directory) procedure, that did not result
+			 in the filesystem blocking to read from disk,
+			 as a percentage of the total number of calls
+			 received for this procedure, since the last
+			 time the statistics were cleared."
+	::= { v3CachedPerCent 18 }
+
+	v3cpFsstats	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_FSSTAT (Get Dynamic File
+			 System Information) procedure, that did not
+			 result in the filesystem blocking to read from
+			 disk, as a percentage of the total number of
+			 calls received for this procedure, since the
+			 last time the statistics were cleared."
+	::= { v3CachedPerCent 19 }
+
+	v3cpFsinfos	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_FSINFO (Get Static File System
+			 Information) procedure, that did not result
+			 in the filesystem blocking to read from disk,
+			 as a percentage of the total number of calls
+			 received for this procedure, since the last
+			 time the statistics were cleared."
+	::= { v3CachedPerCent 20 }
+
+	v3cpPathconfs	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_PATHCONF (Retrieve POSIX
+			 Information) procedure, that did not result
+			 in the filesystem blocking to read from disk,
+			 as a percentage of the total number of calls
+			 received for this procedure, since the last
+			 time the statistics were cleared."
+	::= { v3CachedPerCent 21 }
+
+	v3cpCommits	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_COMMIT (Commit Cached Data on
+			 a Server to Stable Storage) procedure, that
+			 did not result in the filesystem blocking to
+			 read from disk, as a percentage of the total
+			 number of calls received for this procedure,
+			 since the last time the statistics were cleared."
+	::= { v3CachedPerCent 22 }
+
+
+
+	-- the replyCache group
+
+		-- this group contains statistics related to the 
+		-- Reply Cache processing, since the last time the
+		-- statistics were cleared
+
+	rcInProgressHits OBJECT-TYPE
+	SYNTAX		 Counter
+	ACCESS		 read-only
+	STATUS		 mandatory
+	DESCRIPTION
+			"The number of NFS requests that were dropped,
+			 for calls already in progress, since the last
+			 time the statistics were cleared."
+	::= { replyCache 1 }
+
+	rcDelayHits	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		deprecated
+	DESCRIPTION
+			"The number of NFS requests that were dropped,
+			 for replies already generated within a short
+			 interval, since the last time the statistics
+			 were cleared. These stats are deprecated.
+			 A value of zero will always be returned
+			 for these stats." 
+	::= { replyCache 2 }
+
+	rcMisses	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS requests received for which
+			 there were no corresponding entries already in
+			 the Reply Cache, since the last time the
+			 statistics were cleared."
+	::= { replyCache 3 }
+
+	rcNonIdemDoneHits OBJECT-TYPE
+	SYNTAX		  Counter
+	ACCESS		  read-only
+	STATUS		  mandatory
+	DESCRIPTION
+			"The number of NFS requests received that
+			 resulted in replies being replayed from
+			 the Reply Cache, since the last time the
+			 statistics were cleared."
+	::= { replyCache 4 }
+
+	rcNonIdemNotDoneHits OBJECT-TYPE
+	SYNTAX		     Counter
+	ACCESS		     read-only
+	STATUS		     mandatory
+	DESCRIPTION
+			"The number of NFS requests received for calls
+			 that resulted in this request being processed
+			 as a new request even when a corresponding
+			 entry existed in the Reply Cache, since the
+			 last time the statistics were cleared."
+	::= { replyCache 5 }
+
+	rcTcpInProgressHits OBJECT-TYPE
+	SYNTAX		 Counter
+	ACCESS		 read-only
+	STATUS		 mandatory
+	DESCRIPTION
+			"The number of NFS requests that were dropped
+			 for the TCP protocol, for calls already in
+			 progress, since the last time the statistics
+			 were cleared."
+	::= { replyCache 6 }
+
+	rcTcpDelayHits	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		deprecated
+	DESCRIPTION
+			"The number of NFS requests that were dropped
+			 for the TCP protocol, for replies already
+			 generated within a short interval, since the
+			 last time the statistics were cleared. These 
+			 stats are deprecated. A value of zero will 
+			 always be returned for these stats."
+	::= { replyCache 7 }
+
+	rcTcpMisses	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS requests received for the
+			 TCP protocol for which there were no
+			 corresponding entries already in the Reply
+			 Cache, since the last time the statistics
+			 were cleared."
+	::= { replyCache 8 }
+
+	rcTcpNonIdemDoneHits OBJECT-TYPE
+	SYNTAX		  Counter
+	ACCESS		  read-only
+	STATUS		  mandatory
+	DESCRIPTION
+			"The number of NFS requests received for the
+			 TCP protocol that resulted in replies being
+			 replayed from the Reply Cache, since the last
+			 time the statistics were cleared."
+	::= { replyCache 9 }
+
+	rcTcpNonIdemNotDoneHits OBJECT-TYPE
+	SYNTAX		     Counter
+	ACCESS		     read-only
+	STATUS		     mandatory
+	DESCRIPTION
+			"The number of NFS requests received for the
+			 TCP protocol for calls that resulted in this
+			 request being processed as a new request even
+			 when a corresponding entry existed in the Reply
+			 Cache, since the last time the statistics were
+			 cleared."
+	::= { replyCache 10 }
+
+	rcUdpInProgressHits OBJECT-TYPE
+	SYNTAX		 Counter
+	ACCESS		 read-only
+	STATUS		 mandatory
+	DESCRIPTION
+			"The number of NFS requests that were dropped
+			 for the UDP protocol, for calls already in
+			 progress, since the last time the statistics
+			 were cleared."
+	::= { replyCache 11 }
+
+	rcUdpDelayHits	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		deprecated
+	DESCRIPTION
+			"The number of NFS requests that were dropped
+			 for the UDP protocol, for replies already
+			 generated within a short interval, since the
+			 last time the statistics were cleared. These 
+			 stats are deprecated. A value of zero will 
+			 always be returned for these stats."
+	::= { replyCache 12 }
+
+	rcUdpMisses	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS requests received for the
+			 UDP protocol for which there were no
+			 corresponding entries already in the Reply
+			 Cache, since the last time the statistics
+			 were cleared."
+	::= { replyCache 13 }
+
+	rcUdpNonIdemDoneHits OBJECT-TYPE
+	SYNTAX		  Counter
+	ACCESS		  read-only
+	STATUS		  mandatory
+	DESCRIPTION
+			"The number of NFS requests received for the
+			 UDP protocol that resulted in replies being
+			 replayed from the Reply Cache, since the last
+			 time the statistics were cleared."
+	::= { replyCache 14 }
+
+	rcUdpNonIdemNotDoneHits OBJECT-TYPE
+	SYNTAX		     Counter
+	ACCESS		     read-only
+	STATUS		     mandatory
+	DESCRIPTION
+			"The number of NFS requests received for the
+			 UDP protocol for calls that resulted in this
+			 request being processed as a new request even
+			 when a corresponding entry existed in the Reply
+			 Cache, since the last time the statistics were
+			 cleared."
+	::= { replyCache 15 }
+
+	-- the nfsrwStats group
+
+		-- this group contains statistics for the sizes of
+                -- NFS version 2 and 3 read and write calls made
+		-- since the last time the stats were zeroed.
+
+	v2ReadStats            OBJECT IDENTIFIER ::= { nfsrwStats 1 }
+
+	v2WriteStats           OBJECT IDENTIFIER ::= { nfsrwStats 2 }
+
+        v3ReadStats            OBJECT IDENTIFIER ::= { nfsrwStats 3 }
+
+        v3WriteStats           OBJECT IDENTIFIER ::= { nfsrwStats 4 }
+
+	
+	-- v2ReadStats group
+		
+		-- this group contains statistics for the sizes of
+		-- NFS version 2 read calls since they were last
+		-- zeroed.
+
+	v2Read512Calls OBJECT-TYPE
+        SYNTAX          Counter
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                        "The number of NFS Version 2 read calls
+			received by the server since last zeroing
+                        with request sizes between 0-511 bytes."
+        ::= { v2ReadStats 1 }
+
+        v2Read1KCalls  OBJECT-TYPE
+        SYNTAX          Counter
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                        "The number of NFS Version 2 read calls
+			received by the server since last zeroing
+                        with request sizes between 512-1023 bytes."
+        ::= { v2ReadStats 2 }
+
+        v2Read2KCalls  OBJECT-TYPE
+        SYNTAX          Counter
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                        "The number of NFS Version 2 read calls
+			received by the server since last zeroing
+                        with request sizes between 1K-2047 bytes."
+	::= { v2ReadStats 3 }
+
+        v2Read4KCalls  OBJECT-TYPE
+        SYNTAX          Counter
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                        "The number of NFS Version 2 read calls
+			received by the server since last zeroing
+                        with request sizes between 2K-4095 bytes."
+        ::= { v2ReadStats 4 }
+
+        v2Read8KCalls  OBJECT-TYPE
+        SYNTAX          Counter
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                        "The number of NFS Version 2 read calls
+			received by the server since last zeroing
+                        with request sizes between 4K-8191 bytes."
+        ::= { v2ReadStats 5 }
+
+        v2Read16KCalls OBJECT-TYPE
+        SYNTAX          Counter
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                        "The number of NFS Version 2 read calls
+			received by the server since last zeroing
+                        with request sizes between 8K-16383 bytes."
+        ::= { v2ReadStats 6 }
+
+        v2Read32KCalls OBJECT-TYPE
+        SYNTAX          Counter
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                        "The number of NFS Version 2 read calls
+			received by the server since last zeroing
+                        with request sizes between 16K-32767 bytes."
+        ::= { v2ReadStats 7 }
+
+	v2Read64KCalls OBJECT-TYPE
+        SYNTAX          Counter
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                        "The number of NFS Version 2 read calls
+			received by the server since last zeroing
+                        with request sizes between 32K-65535 bytes."
+        ::= { v2ReadStats 8 }
+
+        v2Read128KCalls        OBJECT-TYPE
+        SYNTAX          Counter
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                        "The number of NFS Version 2 read calls
+			received by the server since last zeroing
+                        with request sizes between 64K-131071 bytes."
+        ::= { v2ReadStats 9 }
+
+
+        -- the v2WriteStats group
+
+                -- this group contains statistics for the sizes of
+                -- NFS version 2 write calls since they were last
+		-- zeroed.
+
+        v2Write512Calls        OBJECT-TYPE
+        SYNTAX          Counter
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                        "The number of NFS Version 2 write calls
+			received by the server since last zeroing
+                        with request sizes between 0-511 bytes."
+        ::= { v2WriteStats 1 }
+
+	v2Write1KCalls OBJECT-TYPE
+        SYNTAX          Counter
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                        "The number of NFS Version 2 write calls
+			received by the server since last zeroing
+                        with request sizes between 512-1023 bytes."
+        ::= { v2WriteStats 2 }
+
+        v2Write2KCalls OBJECT-TYPE
+        SYNTAX          Counter
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                        "The number of NFS Version 2 write calls
+			received by the server since last zeroing
+                        with request sizes between 1K-2047 bytes."
+        ::= { v2WriteStats 3 }
+
+        v2Write4KCalls OBJECT-TYPE
+        SYNTAX          Counter
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                        "The number of NFS Version 2 write calls
+			received by the server since last zeroing
+                        with request sizes between 2K-4095 bytes."
+        ::= { v2WriteStats 4 }
+
+        v2Write8KCalls OBJECT-TYPE
+        SYNTAX          Counter
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                        "The number of NFS Version 2 write calls
+			received by the server since last zeroing
+                        with request sizes between 4K-8191 bytes."
+        ::= { v2WriteStats 5 }
+
+	v2Write16KCalls        OBJECT-TYPE
+        SYNTAX          Counter
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                        "The number of NFS Version 2 write calls
+			received by the server since last zeroing
+                        with request sizes between 8K-16383 bytes."
+        ::= { v2WriteStats 6 }
+
+        v2Write32KCalls        OBJECT-TYPE
+        SYNTAX          Counter
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                        "The number of NFS Version 2 write calls
+			received by the server since last zeroing
+                        with request sizes between 16K-32767 bytes."
+        ::= { v2WriteStats 7 }
+
+        v2Write64KCalls        OBJECT-TYPE
+        SYNTAX          Counter
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                        "The number of NFS Version 2 write calls
+			received by the server since last zeroing
+                        with request sizes between 32K-65535 bytes."
+        ::= { v2WriteStats 8 }
+
+        v2Write128KCalls       OBJECT-TYPE
+        SYNTAX          Counter
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                        "The number of NFS Version 2 write calls
+			received by the server since last zeroing
+                        with request sizes between 64K-131071 bytes."
+        ::= { v2WriteStats 9 }
+
+
+	-- the v3ReadStats group
+
+                -- this group contains statistics for the sizes of
+                -- NFS version 3 read calls since they were last
+		-- zeroed.
+
+        v3Read512Calls OBJECT-TYPE
+        SYNTAX          Counter
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                        "The number of NFS Version 3 read calls
+			received by the server since last boot
+                        with request sizes between 0-511 bytes."
+        ::= { v3ReadStats 1 }
+
+        v3Read1KCalls  OBJECT-TYPE
+        SYNTAX          Counter
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                        "The number of NFS Version 3 read calls
+			received by the server since last zeroing
+                        with request sizes between 512-1023 bytes."
+        ::= { v3ReadStats 2 }
+
+        v3Read2KCalls  OBJECT-TYPE
+        SYNTAX          Counter
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                        "The number of NFS Version 3 read calls
+			received by the server since last zeroing
+                        with request sizes between 1K-2047 bytes."
+        ::= { v3ReadStats 3 }
+
+	v3Read4KCalls  OBJECT-TYPE
+        SYNTAX          Counter
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                        "The number of NFS Version 3 read calls
+			received by the server since last zeroing
+                        with request sizes between 2K-4095 bytes."
+        ::= { v3ReadStats 4 }
+
+        v3Read8KCalls  OBJECT-TYPE
+        SYNTAX          Counter
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                        "The number of NFS Version 3 read calls
+			received by the server since last zeroing
+                        with request sizes between 4K-8191 bytes."
+        ::= { v3ReadStats 5 }
+
+        v3Read16KCalls         OBJECT-TYPE
+        SYNTAX          Counter
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                        "The number of NFS Version 3 read calls
+			received by the server since last zeroing
+                        with request sizes between 8K-16383 bytes."
+        ::= { v3ReadStats 6 }
+
+        v3Read32KCalls OBJECT-TYPE
+        SYNTAX          Counter
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                        "The number of NFS Version 3 read calls
+			received by the server since last zeroing
+                        with request sizes between 16K-32767 bytes."
+        ::= { v3ReadStats 7 }
+
+	v3Read64KCalls OBJECT-TYPE
+        SYNTAX          Counter
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                        "The number of NFS Version 3 read calls
+			received by the server since last zeroing
+                        with request sizes between 32K-65535 bytes."
+        ::= { v3ReadStats 8 }
+
+        v3Read128KCalls        OBJECT-TYPE
+        SYNTAX          Counter
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                        "The number of NFS Version 3 read calls
+			received by the server since last zeroing
+                        with request sizes between 64K-131071 bytes."
+        ::= { v3ReadStats 9 }
+
+
+        -- the v3WriteStats group
+
+                -- this group contains statistics for the sizes of
+                -- NFS version 3 write calls since they were last
+		-- zeroed.
+
+        v3Write512Calls        OBJECT-TYPE
+        SYNTAX          Counter
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                        "The number of NFS Version 3 write calls
+			received by the server since last zeroing
+                        with request sizes between 0-511 bytes."
+        ::= { v3WriteStats 1 }
+
+	v3Write1KCalls OBJECT-TYPE
+        SYNTAX          Counter
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                        "The number of NFS Version 3 write calls
+			received by the server since last zeroing
+                        with request sizes between 512-1023 bytes."
+        ::= { v3WriteStats 2 }
+
+        v3Write2KCalls OBJECT-TYPE
+        SYNTAX          Counter
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                        "The number of NFS Version 3 write calls
+			received by the server since last zeroing
+                        with request sizes between 1K-2047 bytes."
+        ::= { v3WriteStats 3 }
+
+        v3Write4KCalls OBJECT-TYPE
+        SYNTAX          Counter
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                        "The number of NFS Version 3 write calls
+			received by the server since last zeroing
+                        with request sizes between 2K-4095 bytes."
+        ::= { v3WriteStats 4 }
+
+        v3Write8KCalls OBJECT-TYPE
+        SYNTAX          Counter
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                        "The number of NFS Version 3 write calls
+			received by the server since last zeroing
+                        with request sizes between 4K-8191 bytes."
+        ::= { v3WriteStats 5 }
+
+	v3Write16KCalls        OBJECT-TYPE
+        SYNTAX          Counter
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                        "The number of NFS Version 3 write calls
+			received by the server since last zeroing
+                        with request sizes between 8K-16383 bytes."
+        ::= { v3WriteStats 6 }
+
+        v3Write32KCalls        OBJECT-TYPE
+        SYNTAX          Counter
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                        "The number of NFS Version 3 write calls
+			received by the server since last zeroing
+                        with request sizes between 16K-32767 bytes."
+        ::= { v3WriteStats 7 }
+
+        v3Write64KCalls        OBJECT-TYPE
+        SYNTAX          Counter
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                        "The number of NFS Version 3 write calls
+			received by the server since last zeroing
+                        with request sizes between 32K-65535 bytes."
+        ::= { v3WriteStats 8 }
+
+        v3Write128KCalls       OBJECT-TYPE
+        SYNTAX          Counter
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                        "The number of NFS Version 3 write calls
+			received by the server since last zeroing
+                        with request sizes between 64K-131071 bytes."
+        ::= { v3WriteStats 9 }
+
+
+	-- the per-client nfs statistics table
+ 
+	pclTable	OBJECT-TYPE
+	SYNTAX		SEQUENCE OF PclEntry
+	ACCESS		not-accessible
+	STATUS		mandatory
+	DESCRIPTION
+			"Provide a report of per-client NFS statistics
+			 since the last time the statistics were cleared."
+	::= { nfsPerClient 1 }
+ 
+	pclEntry	OBJECT-TYPE
+	SYNTAX		PclEntry
+	ACCESS		not-accessible
+	STATUS		mandatory
+	DESCRIPTION
+			"Provide a report of NFS statistics for the
+			 referenced NFS client since the last time the
+			 statistics were cleared."
+	INDEX	{ pclIpAddr }
+	::= { pclTable 1 }
+
+	PclEntry ::=
+	    SEQUENCE {
+		pclIpAddr
+		    IpAddress,
+		pclRpcCalls
+		    Counter,
+		pclRpcBadCalls
+		    Counter,
+		pclRpcNullRecvs
+		    Counter,
+		pclRpcBadLens
+		    Counter,
+		pclRpcServXDRCalls
+		    Counter,
+		pclNfsCalls
+		    Counter,
+		pclNfsServBadCalls
+		    Counter,
+		pclNfsV2Nulls
+		    Counter,
+		pclNfsV2Getattrs
+		    Counter,
+		pclNfsV2Setattrs
+		    Counter,
+		pclNfsV2Roots
+		    Counter,
+		pclNfsV2Lookups
+		    Counter,
+		pclNfsV2Readlinks
+		    Counter,
+		pclNfsV2Reads
+		    Counter,
+		pclNfsV2Wrcaches
+		    Counter,
+		pclNfsV2Writes
+		    Counter,
+		pclNfsV2Creates
+		    Counter,
+		pclNfsV2Removes
+		    Counter,
+		pclNfsV2Renames
+		    Counter,
+		pclNfsV2Links
+		    Counter,
+		pclNfsV2Symlinks
+		    Counter,
+		pclNfsV2Mkdirs
+		    Counter,
+		pclNfsV2Rmdirs
+		    Counter,
+		pclNfsV2Readdirs
+		    Counter,
+		pclNfsV2Statfss
+		    Counter,
+		pclNfsV3Nulls
+		    Counter,
+		pclNfsV3Getattrs
+		    Counter,
+		pclNfsV3Setattrs
+		    Counter,
+		pclNfsV3Lookups
+		    Counter,
+		pclNfsV3Accesss
+		    Counter,
+		pclNfsV3Readlinks
+		    Counter,
+		pclNfsV3Reads
+		    Counter,
+		pclNfsV3Writes
+		    Counter,
+		pclNfsV3Creates
+		    Counter,
+		pclNfsV3Mkdirs
+		    Counter,
+		pclNfsV3Symlinks
+		    Counter,
+		pclNfsV3Mknods
+		    Counter,
+		pclNfsV3Removes
+		    Counter,
+		pclNfsV3Rmdirs
+		    Counter,
+		pclNfsV3Renames
+		    Counter,
+		pclNfsV3Links
+		    Counter,
+		pclNfsV3Readdirs
+		    Counter,
+		pclNfsV3ReaddirPluss
+		    Counter,
+		pclNfsV3Fsstats
+		    Counter,
+		pclNfsV3Fsinfos
+		    Counter,
+		pclNfsV3Pathconfs
+		    Counter,
+		pclNfsV3Commits
+		    Counter,
+		pclPerCent
+		    INTEGER (0..100),
+		pclNfsV2NullPerCent
+		    INTEGER (0..100),
+		pclNfsV2GetattrPerCent
+		    INTEGER (0..100),
+		pclNfsV2SetattrPerCent
+		    INTEGER (0..100),
+		pclNfsV2RootPerCent
+		    INTEGER (0..100),
+		pclNfsV2LookupPerCent
+		    INTEGER (0..100),
+		pclNfsV2ReadlinkPerCent
+		    INTEGER (0..100),
+		pclNfsV2ReadPerCent
+		    INTEGER (0..100),
+		pclNfsV2WrcachePerCent
+		    INTEGER (0..100),
+		pclNfsV2WritePerCent
+		    INTEGER (0..100),
+		pclNfsV2CreatePerCent
+		    INTEGER (0..100),
+		pclNfsV2RemovePerCent
+		    INTEGER (0..100),
+		pclNfsV2RenamePerCent
+		    INTEGER (0..100),
+		pclNfsV2LinkPerCent
+		    INTEGER (0..100),
+		pclNfsV2SymlinkPerCent
+		    INTEGER (0..100),
+		pclNfsV2MkdirPerCent
+		    INTEGER (0..100),
+		pclNfsV2RmdirPerCent
+		    INTEGER (0..100),
+		pclNfsV2ReaddirPerCent
+		    INTEGER (0..100),
+		pclNfsV2StatfsPerCent
+		    INTEGER (0..100),
+		pclNfsV3NullPerCent
+		    INTEGER (0..100),
+		pclNfsV3GetattrPerCent
+		    INTEGER (0..100),
+		pclNfsV3SetattrPerCent
+		    INTEGER (0..100),
+		pclNfsV3LookupPerCent
+		    INTEGER (0..100),
+		pclNfsV3AccessPerCent
+		    INTEGER (0..100),
+		pclNfsV3ReadlinkPerCent
+		    INTEGER (0..100),
+		pclNfsV3ReadPerCent
+		    INTEGER (0..100),
+		pclNfsV3WritePerCent
+		    INTEGER (0..100),
+		pclNfsV3CreatePerCent
+		    INTEGER (0..100),
+		pclNfsV3MkdirPerCent
+		    INTEGER (0..100),
+		pclNfsV3SymlinkPerCent
+		    INTEGER (0..100),
+		pclNfsV3MknodPerCent
+		    INTEGER (0..100),
+		pclNfsV3RemovePerCent
+		    INTEGER (0..100),
+		pclNfsV3RmdirPerCent
+		    INTEGER (0..100),
+		pclNfsV3RenamePerCent
+		    INTEGER (0..100),
+		pclNfsV3LinkPerCent
+		    INTEGER (0..100),
+		pclNfsV3ReaddirPerCent
+		    INTEGER (0..100),
+		pclNfsV3ReaddirPlusPerCent
+		    INTEGER (0..100),
+		pclNfsV3FsstatPerCent
+		    INTEGER (0..100),
+		pclNfsV3FsinfoPerCent
+		    INTEGER (0..100),
+		pclNfsV3PathconfPerCent
+		    INTEGER (0..100),
+		pclNfsV3CommitPerCent
+		    INTEGER (0..100),
+		pclNfsV2Read512Calls
+		    Counter,
+		pclNfsV2Read1KCalls
+		    Counter,
+		pclNfsV2Read2KCalls
+		    Counter,
+		pclNfsV2Read4KCalls
+		    Counter,
+		pclNfsV2Read8KCalls
+		    Counter,
+		pclNfsV2Read16KCalls
+		    Counter,
+		pclNfsV2Read32KCalls
+		    Counter,
+		pclNfsV2Read64KCalls
+		    Counter,
+		pclNfsV2Read128KCalls
+		    Counter,
+		pclNfsV2Write512Calls
+		    Counter,
+		pclNfsV2Write1KCalls
+		    Counter,
+		pclNfsV2Write2KCalls
+		    Counter,
+		pclNfsV2Write4KCalls
+		    Counter,
+		pclNfsV2Write8KCalls
+		    Counter,
+		pclNfsV2Write16KCalls
+		    Counter,
+		pclNfsV2Write32KCalls
+		    Counter,
+		pclNfsV2Write64KCalls
+		    Counter,
+		pclNfsV2Write128KCalls
+		    Counter,
+		pclNfsV3Read512Calls
+		    Counter,
+		pclNfsV3Read1KCalls
+		    Counter,
+		pclNfsV3Read2KCalls
+		    Counter,
+		pclNfsV3Read4KCalls
+		    Counter,
+		pclNfsV3Read8KCalls
+		    Counter,
+		pclNfsV3Read16KCalls
+		    Counter,
+		pclNfsV3Read32KCalls
+		    Counter,
+		pclNfsV3Read64KCalls
+		    Counter,
+		pclNfsV3Read128KCalls
+		    Counter,
+		pclNfsV3Write512Calls
+		    Counter,
+		pclNfsV3Write1KCalls
+		    Counter,
+		pclNfsV3Write2KCalls
+		    Counter,
+		pclNfsV3Write4KCalls
+		    Counter,
+		pclNfsV3Write8KCalls
+		    Counter,
+		pclNfsV3Write16KCalls
+		    Counter,
+		pclNfsV3Write32KCalls
+		    Counter,
+		pclNfsV3Write64KCalls
+		    Counter,
+		pclNfsV3Write128KCalls
+		    Counter
+	    }
+
+	pclIpAddr	OBJECT-TYPE
+	SYNTAX		IpAddress
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The IP address of the referenced client."
+	::= { pclEntry 1 }
+
+	pclRpcCalls	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The total number of RPC calls received from
+			 the referenced client, since the last time the
+			 statistics were cleared."
+	::= { pclEntry 2 }
+
+	pclRpcBadCalls	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The total number of calls received from the
+			 referenced client that were rejected by the
+			 RPC layer, since the last time the
+			 statistics were cleared."
+	::= { pclEntry 3 }
+
+	pclRpcNullRecvs	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of times an RPC call was not available
+			 when it was thought to be received from
+			 referenced client, since the last time the
+			 statistics were cleared."
+	::= { pclEntry 4 }
+
+	pclRpcBadLens	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of RPC calls received from the
+			 referenced client with a length shorter
+			 than a minimum-sized RPC call, since the
+			 last time the statistics were cleared."
+	::= { pclEntry 5 }
+
+	pclRpcServXDRCalls OBJECT-TYPE
+	SYNTAX		   Counter
+	ACCESS		   read-only
+	STATUS		   mandatory
+	DESCRIPTION
+			   "The number of RPC calls received from the
+			    referenced client whose header could not
+			    be XDR decoded, since the last time the
+			    statistics were cleared."
+	::= { pclEntry 6 }
+
+	pclNfsCalls	   OBJECT-TYPE
+	SYNTAX		   Counter
+	ACCESS		   read-only
+	STATUS		   mandatory
+	DESCRIPTION
+			   "The total number of NFS calls received from
+			    the referenced client, since the last time
+			    the statistics were cleared."
+	::= { pclEntry 7 }
+
+	pclNfsServBadCalls OBJECT-TYPE
+	SYNTAX		   Counter
+	ACCESS		   read-only
+	STATUS		   mandatory
+	DESCRIPTION
+			   "The total number of NFS calls received from
+			    the referenced client that were rejected, since
+			    the last time the statistics were cleared."
+	::= { pclEntry 8 }
+
+	pclNfsV2Nulls	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 from the referenced client for the NFSPROC_NULL
+			 (Do Nothing) procedure, since the last time the
+			 statistics were cleared."
+	::= { pclEntry 9 }
+
+	pclNfsV2Getattrs OBJECT-TYPE
+	SYNTAX		 Counter
+	ACCESS		 read-only
+	STATUS		 mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 from the referenced client for the NFSPROC_GETATTR
+			 (Get File Attributes) procedure, since the last
+			 time the statistics were cleared."
+	::= { pclEntry 10 }
+
+	pclNfsV2Setattrs OBJECT-TYPE
+	SYNTAX		 Counter
+	ACCESS		 read-only
+	STATUS		 mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 from the referenced client for the NFSPROC_SETATTR
+			 (Set File Attributes) procedure, since the last
+			 time the statistics were cleared."
+	::= { pclEntry 11 }
+
+	pclNfsV2Roots	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 from the referenced client for the NFSPROC_ROOT
+			 (Get Filesystem Root) procedure, since the last
+			 time the statistics were cleared."
+	::= { pclEntry 12 }
+
+	pclNfsV2Lookups	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 from the referenced client for the NFSPROC_LOOKUP
+			 (Look Up File Name) procedure, since the last
+			 time the statistics were cleared."
+	::= { pclEntry 13 }
+
+	pclNfsV2Readlinks OBJECT-TYPE
+	SYNTAX		  Counter
+	ACCESS		  read-only
+	STATUS		  mandatory
+	DESCRIPTION
+			 "The number of NFS Version 2 calls received
+			  from the referenced client for the NFSPROC_READLINK
+			  (Read From Symbolic Link) procedure, since the last
+			  time the statistics were cleared."
+	::= { pclEntry 14 }
+
+	pclNfsV2Reads	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 from the referenced client for the NFSPROC_READ
+			 (Read From File) procedure, since the last
+			 time the statistics were cleared."
+	::= { pclEntry 15 }
+
+	pclNfsV2Wrcaches OBJECT-TYPE
+	SYNTAX		 Counter
+	ACCESS		 read-only
+	STATUS		 mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 from the referenced client for the NFSPROC_WRITECACHE
+			 (Write to Cache) procedure, since the last
+			 time the statistics were cleared."
+	::= { pclEntry 16 }
+
+	pclNfsV2Writes	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 from the referenced client for the NFSPROC_WRITE
+			 (Write to File) procedure, since the last
+			 time the statistics were cleared."
+	::= { pclEntry 17 }
+
+	pclNfsV2Creates	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 from the referenced client for the NFSPROC_CREATE
+			 (Create File) procedure, since the last
+			 time the statistics were cleared."
+	::= { pclEntry 18 }
+
+	pclNfsV2Removes	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 from the referenced client for the NFSPROC_REMOVE
+			 (Remove File) procedure, since the last
+			 time the statistics were cleared."
+	::= { pclEntry 19 }
+
+	pclNfsV2Renames	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 from the referenced client for the NFSPROC_RENAME
+			 (Rename File) procedure, since the last
+			 time the statistics were cleared."
+	::= { pclEntry 20 }
+
+	pclNfsV2Links	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 from the referenced client for the NFSPROC_LINK
+			 (Create Link to File) procedure, since the last
+			 time the statistics were cleared."
+	::= { pclEntry 21 }
+
+	pclNfsV2Symlinks OBJECT-TYPE
+	SYNTAX		 Counter
+	ACCESS		 read-only
+	STATUS		 mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 from the referenced client for the NFSPROC_SYMLINK
+			 (Create Symbolic Link) procedure, since the last
+			 time the statistics were cleared."
+	::= { pclEntry 22 }
+
+	pclNfsV2Mkdirs	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 from the referenced client for the NFSPROC_MKDIR
+			 (Create Directory) procedure, since the last
+			 time the statistics were cleared."
+	::= { pclEntry 23 }
+
+	pclNfsV2Rmdirs	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 from the referenced client for the NFSPROC_RMDIR
+			 (Remove Directory) procedure, since the last
+			 time the statistics were cleared."
+	::= { pclEntry 24 }
+
+	pclNfsV2Readdirs OBJECT-TYPE
+	SYNTAX		 Counter
+	ACCESS		 read-only
+	STATUS		 mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 from the referenced client for the NFSPROC_READDIR
+			 (Read From Directory) procedure, since the last
+			 time the statistics were cleared."
+	::= { pclEntry 25 }
+
+	pclNfsV2Statfss OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 from the referenced client for the NFSPROC_STATFS
+			 (Get Filesystem Attributes) procedure, since the
+			 last time the statistics were cleared."
+	::= { pclEntry 26 }
+
+	pclNfsV3Nulls	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 from the referenced client for the NFSPROC3_NULL
+			 (Do Nothing) procedure, since the last time the
+			 statistics were cleared."
+	::= { pclEntry 27 }
+
+	pclNfsV3Getattrs OBJECT-TYPE
+	SYNTAX		 Counter
+	ACCESS		 read-only
+	STATUS		 mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 from the referenced client for the NFSPROC3_GETATTR
+			 (Get File Attributes) procedure, since the last
+			 time the statistics were cleared."
+	::= { pclEntry 28 }
+
+	pclNfsV3Setattrs OBJECT-TYPE
+	SYNTAX		 Counter
+	ACCESS		 read-only
+	STATUS		 mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 from the referenced client for the NFSPROC3_SETATTR
+			 (Set File Attributes) procedure, since the last
+			 time the statistics were cleared."
+	::= { pclEntry 29 }
+
+	pclNfsV3Lookups	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 from the referenced client for the NFSPROC3_LOOKUP
+			 (Lookup Filename) procedure, since the last time
+			 the statistics were cleared."
+	::= { pclEntry 30 }
+
+	pclNfsV3Accesss	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 from the referenced client for the NFSPROC3_ACCESS
+			 (Check Access Permission) procedure, since the
+			 last time the statistics were cleared."
+	::= { pclEntry 31 }
+
+	pclNfsV3Readlinks OBJECT-TYPE
+	SYNTAX		  Counter
+	ACCESS		  read-only
+	STATUS		  mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 from the referenced client for the NFSPROC3_READLINK
+			 (Read from Symbolic Link) procedure, since the
+			 last time the statistics were cleared."
+	::= { pclEntry 32 }
+
+	pclNfsV3Reads	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 from the referenced client for the NFSPROC3_READ
+			 (Read From File) procedure, since the last time
+			 the statistics were cleared."
+	::= { pclEntry 33 }
+
+	pclNfsV3Writes	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 from the referenced client for the NFSPROC3_WRITE
+			 (Write to File) procedure, since the last time
+			 the statistics were cleared."
+	::= { pclEntry 34 }
+
+	pclNfsV3Creates	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 from the referenced client for the NFSPROC3_CREATE
+			 (Create a File) procedure, since the last time
+			 the statistics were cleared."
+	::= { pclEntry 35 }
+
+	pclNfsV3Mkdirs	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 from the referenced client for the NFSPROC3_MKDIR
+			 (Create a Directory) procedure, since the last
+			 time the statistics were cleared."
+	::= { pclEntry 36 }
+
+	pclNfsV3Symlinks OBJECT-TYPE
+	SYNTAX		 Counter
+	ACCESS		 read-only
+	STATUS		 mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 from the referenced client for the NFSPROC3_SYMLINK
+			 (Create a Symbolic Link) procedure, since the last
+			 time the statistics were cleared."
+	::= { pclEntry 37 }
+
+	pclNfsV3Mknods	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 from the referenced client for the NFSPROC3_MKNOD
+			 (Create a Special Device) procedure, since the
+			 last time the statistics were cleared."
+	::= { pclEntry 38 }
+
+	pclNfsV3Removes	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 from the referenced client for the NFSPROC3_REMOVE
+			 (Remove a File) procedure, since the last time
+			 the statistics were cleared."
+	::= { pclEntry 39 }
+
+	pclNfsV3Rmdirs	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 from the referenced client for the NFSPROC3_RMDIR
+			 (Remove a Directory) procedure, since the last
+			 time the statistics were cleared."
+	::= { pclEntry 40 }
+
+	pclNfsV3Renames	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 from the referenced client for the NFSPROC3_RENAME
+			 (Rename a File or Directory) procedure, since the
+			 last time the statistics were cleared."
+	::= { pclEntry 41 }
+
+	pclNfsV3Links	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 from the referenced client for the NFSPROC3_LINK
+			 (Create Link to an Object) procedure, since the
+			 last time the statistics were cleared."
+	::= { pclEntry 42 }
+
+	pclNfsV3Readdirs OBJECT-TYPE
+	SYNTAX		 Counter
+	ACCESS		 read-only
+	STATUS		 mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 from the referenced client for the NFSPROC3_READDIR
+			 (Read From Directory) procedure, since the last
+			 time the statistics were cleared."
+	::= { pclEntry 43 }
+
+	pclNfsV3ReaddirPluss OBJECT-TYPE
+	SYNTAX		     Counter
+	ACCESS		     read-only
+	STATUS		     mandatory
+	DESCRIPTION
+			     "The number of NFS Version 3 calls received
+			      from the referenced client for the
+			      NFSPROC3_READDIRPLUS (Extended Read from
+			      Directory) procedure, since the last time
+			      the statistics were cleared."
+	::= { pclEntry 44 }
+
+	pclNfsV3Fsstats	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 from the referenced client for the NFSPROC3_FSSTAT
+			 (Get Dynamic File System Information) procedure,
+			 since the last time the statistics were cleared."
+	::= { pclEntry 45 }
+
+	pclNfsV3Fsinfos	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 from the referenced client for the NFSPROC3_FSINFO
+			 (Get Static File System Information) procedure,
+			 since the last time the statistics were cleared."
+	::= { pclEntry 46 }
+
+	pclNfsV3Pathconfs OBJECT-TYPE
+	SYNTAX		  Counter
+	ACCESS		  read-only
+	STATUS		  mandatory
+	DESCRIPTION
+			  "The number of NFS Version 3 calls received
+			   from the referenced client for the NFSPROC3_PATHCONF
+			   (Retrieve POSIX Information) procedure, since the
+			   last time the statistics were cleared."
+	::= { pclEntry 47 }
+
+	pclNfsV3Commits	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 from the referenced client for the NFSPROC3_COMMIT
+			 (Commit Cached Data on a Server to Stable Storage)
+			 procedure, since the last time the statistics were
+			 cleared."
+	::= { pclEntry 48 }
+
+	pclPerCent		OBJECT-TYPE
+	SYNTAX			INTEGER(0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of the total NFS calls for the
+				 referenced client as a percentage of the
+				 total NFS calls received from all
+				 clients, since the last time the
+				 statistics were cleared."
+	::= { pclEntry 49 }
+
+	pclNfsV2NullPerCent	OBJECT-TYPE
+	SYNTAX			INTEGER(0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of NFS Version 2 calls
+				 received from the referenced client for
+				 the NFSPROC_NULL (Do Nothing) procedure,
+				 as a percentage of the total calls
+				 received from this client, since the
+				 last time the statistics were cleared."
+	::= { pclEntry 50 }
+
+	pclNfsV2GetattrPerCent	OBJECT-TYPE
+	SYNTAX			INTEGER(0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of NFS Version 2 calls
+				 received from the referenced client for
+				 the NFSPROC_GETATTR (Get File Attributes)
+				 procedure, as a percentage of the total
+				 calls received from this client, since
+				 the last time the statistics were cleared."
+	::= { pclEntry 51 }
+
+	pclNfsV2SetattrPerCent	OBJECT-TYPE
+	SYNTAX			INTEGER(0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of NFS Version 2 calls
+				 received from the referenced client for
+				 the NFSPROC_SETATTR (Set File Attributes)
+				 procedure, as a percentage of the total
+				 calls received from this client, since
+				 the last time the statistics were cleared."
+	::= { pclEntry 52 }
+
+	pclNfsV2RootPerCent	OBJECT-TYPE
+	SYNTAX			INTEGER(0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of NFS Version 2 calls
+				 received from the referenced client for
+				 the NFSPROC_ROOT (Get Filesystem Root)
+				 procedure, as a percentage of the total
+				 calls received from this client, since
+				 the last time the statistics were cleared."
+	::= { pclEntry 53 }
+
+	pclNfsV2LookupPerCent	OBJECT-TYPE
+	SYNTAX			INTEGER(0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of NFS Version 2 calls
+				 received from the referenced client for
+				 the NFSPROC_LOOKUP (Look Up File Name)
+				 procedure, as a percentage of the total
+				 calls received from this client, since
+				 the last time the statistics were cleared."
+	::= { pclEntry 54 }
+
+	pclNfsV2ReadlinkPerCent	OBJECT-TYPE
+	SYNTAX			INTEGER(0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of NFS Version 2 calls
+				 received from the referenced client for
+				 the NFSPROC_READLINK (Read From Symbolic
+				 Link) procedure, as a percentage of the
+				 total calls received from this client,
+				 since the last time the statistics were
+				 cleared."
+	::= { pclEntry 55 }
+
+	pclNfsV2ReadPerCent	OBJECT-TYPE
+	SYNTAX			INTEGER(0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of NFS Version 2 calls
+				 received from the referenced client for
+				 the NFSPROC_READ (Read From File)
+				 procedure, as a percentage of the total
+				 calls received from this client, since
+				 the last time the statistics were cleared."
+	::= { pclEntry 56 }
+
+	pclNfsV2WrcachePerCent	OBJECT-TYPE
+	SYNTAX			INTEGER(0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of NFS Version 2 calls
+				 received from the referenced client for
+				 the NFSPROC_WRITECACHE (Write to Cache)
+				 procedure, as a percentage of the total
+				 calls received from this client, since
+				 the last time the statistics were cleared."
+	::= { pclEntry 57 }
+
+	pclNfsV2WritePerCent	OBJECT-TYPE
+	SYNTAX			INTEGER(0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of NFS Version 2 calls
+				 received from the referenced client for
+				 the NFSPROC_WRITE (Write to File)
+				 procedure, as a percentage of the total
+				 calls received from this client, since
+				 the last time the statistics were cleared."
+	::= { pclEntry 58 }
+
+	pclNfsV2CreatePerCent	OBJECT-TYPE
+	SYNTAX			INTEGER(0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of NFS Version 2 calls
+				 received from the referenced client for
+				 the NFSPROC_CREATE (Create File)
+				 procedure, as a percentage of the total
+				 calls received from this client, since
+				 the last time the statistics were cleared."
+	::= { pclEntry 59 }
+
+	pclNfsV2RemovePerCent	OBJECT-TYPE
+	SYNTAX			INTEGER(0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of NFS Version 2 calls
+				 received from the referenced client for
+				 the NFSPROC_REMOVE (Remove File)
+				 procedure, as a percentage of the total
+				 calls received from this client, since
+				 the last time the statistics were cleared."
+	::= { pclEntry 60 }
+
+	pclNfsV2RenamePerCent	OBJECT-TYPE
+	SYNTAX			INTEGER(0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of NFS Version 2 calls
+				 received from the referenced client for
+				 the NFSPROC_RENAME (Rename File)
+				 procedure, as a percentage of the total
+				 calls received from this client, since
+				 the last time the statistics were cleared."
+	::= { pclEntry 61 }
+
+	pclNfsV2LinkPerCent	OBJECT-TYPE
+	SYNTAX			INTEGER(0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of NFS Version 2 calls
+				 received from the referenced client for
+				 the NFSPROC_LINK (Create Link to File)
+				 procedure, as a percentage of the total
+				 calls received from this client, since
+				 the last time the statistics were cleared."
+	::= { pclEntry 62 }
+
+	pclNfsV2SymlinkPerCent	OBJECT-TYPE
+	SYNTAX			INTEGER(0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of NFS Version 2 calls
+				 received from the referenced client for
+				 the NFSPROC_SYMLINK (Create Symbolic Link)
+				 procedure, as a percentage of the total
+				 calls received from this client, since
+				 the last time the statistics were cleared."
+	::= { pclEntry 63 }
+
+	pclNfsV2MkdirPerCent	OBJECT-TYPE
+	SYNTAX			INTEGER(0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of NFS Version 2 calls
+				 received from the referenced client for
+				 the NFSPROC_MKDIR (Create Directory)
+				 procedure, as a percentage of the total
+				 calls received from this client, since
+				 the last time the statistics were cleared."
+	::= { pclEntry 64 }
+
+	pclNfsV2RmdirPerCent	OBJECT-TYPE
+	SYNTAX		 	INTEGER(0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of NFS Version 2 calls
+				 received from the referenced client for
+				 the NFSPROC_RMDIR (Remove Directory)
+				 procedure, as a percentage of the total
+				 calls received from this client, since
+				 the last time the statistics were cleared."
+	::= { pclEntry 65 }
+
+	pclNfsV2ReaddirPerCent	OBJECT-TYPE
+	SYNTAX			INTEGER(0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of NFS Version 2 calls
+				 received from the referenced client for
+				 the NFSPROC_READDIR (Read From Directory)
+				 procedure, as a percentage of the total
+				 calls received from this client, since
+				 the last time the statistics were cleared."
+	::= { pclEntry 66 }
+
+	pclNfsV2StatfsPerCent	OBJECT-TYPE
+	SYNTAX			INTEGER(0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of NFS Version 2 calls
+				 received from the referenced client for
+				 the NFSPROC_STATFS (Get Filesystem
+				 Attributes) procedure, as a percentage
+				 of the total calls received from this
+				 client, since the last time the
+				 statistics were cleared."
+	::= { pclEntry 67 }
+
+	pclNfsV3NullPerCent	OBJECT-TYPE
+	SYNTAX			INTEGER(0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of NFS Version 3 calls
+				 received from the referenced client for
+				 the NFSPROC3_NULL (Do Nothing) 
+				 procedure, as a percentage of the total
+				 calls received from this client, since
+				 the last time the statistics were cleared."
+	::= { pclEntry 68 }
+
+	pclNfsV3GetattrPerCent	OBJECT-TYPE
+	SYNTAX			INTEGER(0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of NFS Version 3 calls
+				 received from the referenced client for
+				 the NFSPROC3_GETATTR (Get File Attributes)
+				 procedure, as a percentage of the total
+				 calls received from this client, since
+				 the last time the statistics were cleared."
+	::= { pclEntry 69 }
+
+	pclNfsV3SetattrPerCent	OBJECT-TYPE
+	SYNTAX			INTEGER(0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of NFS Version 3 calls
+				 received from the referenced client for
+				 the NFSPROC3_SETATTR (Set File Attributes)
+				 procedure, as a percentage of the total
+				 calls received from this client, since
+				 the last time the statistics were cleared."
+	::= { pclEntry 70 }
+
+	pclNfsV3LookupPerCent	OBJECT-TYPE
+	SYNTAX			INTEGER(0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of NFS Version 3 calls
+				 received from the referenced client for
+				 the NFSPROC3_LOOKUP (Lookup Filename)
+				 procedure, as a percentage of the total
+				 calls received from this client, since
+				 the last time the statistics were cleared."
+	::= { pclEntry 71 }
+
+	pclNfsV3AccessPerCent	OBJECT-TYPE
+	SYNTAX			INTEGER(0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of NFS Version 3 calls
+				 received from the referenced client for
+				 the NFSPROC3_ACCESS (Check Access Permission)
+				 procedure, as a percentage of the total
+				 calls received from this client, since
+				 the last time the statistics were cleared."
+	::= { pclEntry 72 }
+
+	pclNfsV3ReadlinkPerCent	OBJECT-TYPE
+	SYNTAX			INTEGER(0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of NFS Version 3 calls
+				 received from the referenced client for
+				 the NFSPROC3_READLINK (Read from Symbolic
+				 Link) procedure, as a percentage of the total
+				 calls received from this client, since
+				 the last time the statistics were cleared."
+	::= { pclEntry 73 }
+
+	pclNfsV3ReadPerCent	OBJECT-TYPE
+	SYNTAX			INTEGER(0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of NFS Version 3 calls
+				 received from the referenced client for
+				 the NFSPROC3_READ (Read From File)
+				 procedure, as a percentage of the total
+				 calls received from this client, since
+				 the last time the statistics were cleared."
+	::= { pclEntry 74 }
+
+	pclNfsV3WritePerCent	OBJECT-TYPE
+	SYNTAX			INTEGER(0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of NFS Version 3 calls
+				 received from the referenced client for
+				 the NFSPROC3_WRITE (Write to File)
+				 procedure, as a percentage of the total
+				 calls received from this client, since
+				 the last time the statistics were cleared."
+	::= { pclEntry 75 }
+
+	pclNfsV3CreatePerCent	OBJECT-TYPE
+	SYNTAX			INTEGER(0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of NFS Version 3 calls
+				 received from the referenced client for
+				 the NFSPROC3_CREATE (Create a File)
+				 procedure, as a percentage of the total
+				 calls received from this client, since
+				 the last time the statistics were cleared."
+	::= { pclEntry 76 }
+
+	pclNfsV3MkdirPerCent	OBJECT-TYPE
+	SYNTAX			INTEGER(0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of NFS Version 3 calls
+				 received from the referenced client for
+				 the NFSPROC3_MKDIR (Create a Directory)
+				 procedure, as a percentage of the total
+				 calls received from this client, since
+				 the last time the statistics were cleared."
+	::= { pclEntry 77 }
+
+	pclNfsV3SymlinkPerCent	OBJECT-TYPE
+	SYNTAX			INTEGER(0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of NFS Version 3 calls
+				 received from the referenced client for
+				 the NFSPROC3_SYMLINK (Create a Symbolic
+				 Link) procedure, as a percentage of the
+				 total calls received from this client, since
+				 the last time the statistics were cleared."
+	::= { pclEntry 78 }
+
+	pclNfsV3MknodPerCent	OBJECT-TYPE
+	SYNTAX			INTEGER(0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of NFS Version 3 calls
+				 received from the referenced client for
+				 the NFSPROC3_MKNOD (Create a Special
+				 Device) procedure, as a percentage of the
+				 total calls received from this client, since
+				 the last time the statistics were cleared."
+	::= { pclEntry 79 }
+
+	pclNfsV3RemovePerCent	OBJECT-TYPE
+	SYNTAX			INTEGER(0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of NFS Version 3 calls
+				 received from the referenced client for
+				 the NFSPROC3_REMOVE (Remove a File)
+				 procedure, as a percentage of the total
+				 calls received from this client, since
+				 the last time the statistics were cleared."
+	::= { pclEntry 80 }
+
+	pclNfsV3RmdirPerCent	OBJECT-TYPE
+	SYNTAX			INTEGER(0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of NFS Version 3 calls
+				 received from the referenced client for
+				 the NFSPROC3_RMDIR (Remove a Directory)
+				 procedure, as a percentage of the total
+				 calls received from this client, since
+				 the last time the statistics were cleared."
+	::= { pclEntry 81 }
+
+	pclNfsV3RenamePerCent	OBJECT-TYPE
+	SYNTAX			INTEGER(0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of NFS Version 3 calls
+				 received from the referenced client for
+				 the NFSPROC3_RENAME (Rename a File or
+				 Directory) procedure, as a percentage of
+				 the total calls received from this client,
+				 since the last time the statistics were
+				 cleared."
+	::= { pclEntry 82 }
+
+	pclNfsV3LinkPerCent	OBJECT-TYPE
+	SYNTAX			INTEGER(0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of NFS Version 3 calls
+				 received from the referenced client for
+				 the NFSPROC3_LINK (Create Link to an Object) 
+				 procedure, as a percentage of the total
+				 calls received from this client, since
+				 the last time the statistics were cleared."
+	::= { pclEntry 83 }
+
+	pclNfsV3ReaddirPerCent	OBJECT-TYPE
+	SYNTAX			INTEGER(0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of NFS Version 3 calls
+				 received from the referenced client for
+				 the NFSPROC3_READDIR (Read From Directory)
+				 procedure, as a percentage of the total
+				 calls received from this client, since
+				 the last time the statistics were cleared."
+	::= { pclEntry 84 }
+
+	pclNfsV3ReaddirPlusPerCent	OBJECT-TYPE
+	SYNTAX				INTEGER(0..100)
+	ACCESS				read-only
+	STATUS				mandatory
+	DESCRIPTION
+				"The number of NFS Version 3 calls
+				 received from the referenced client for
+				 the NFSPROC3_READDIRPLUS (Extended Read from
+				 Directory) procedure, as a percentage of the
+				 total calls received from this client, since
+				 the last time the statistics were cleared."
+	::= { pclEntry 85 }
+
+	pclNfsV3FsstatPerCent	OBJECT-TYPE
+	SYNTAX			INTEGER(0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of NFS Version 3 calls
+				 received from the referenced client for
+				 the NFSPROC3_FSSTAT (Get Dynamic File
+				 System Information) procedure, as a
+				 percentage of the total calls received
+				 from this client, since the last time
+				 the statistics were cleared."
+	::= { pclEntry 86 }
+
+	pclNfsV3FsinfoPerCent	OBJECT-TYPE
+	SYNTAX			INTEGER(0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of NFS Version 3 calls
+				 received from the referenced client for
+				 the NFSPROC3_FSINFO (Get Static File System
+				 Information) procedure, as a percentage of the
+				 total calls received from this client, since
+				 the last time the statistics were cleared."
+	::= { pclEntry 87 }
+
+	pclNfsV3PathconfPerCent	OBJECT-TYPE
+	SYNTAX			INTEGER(0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of NFS Version 3 calls
+				 received from the referenced client for
+				 the NFSPROC3_PATHCONF (Retrieve POSIX
+				 Information) procedure, as a percentage of the
+				 total calls received from this client, since
+				 the last time the statistics were cleared."
+	::= { pclEntry 88 }
+
+	pclNfsV3CommitPerCent	OBJECT-TYPE
+	SYNTAX			INTEGER(0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of NFS Version 3 calls
+				 received from the referenced client for
+				 the NFSPROC3_COMMIT (Commit Cached Data on
+				 a Server to Stable Storage) procedure, as
+				 a percentage of the total calls received
+				 from this client, since the last time the
+				 statistics were cleared."
+	::= { pclEntry 89 }
+
+	pclNfsV2Read512Calls	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of NFS Version 2 read calls 
+				with request sizes between 0-511 bytes 
+				received from this client."
+	::= { pclEntry 90 }
+
+	pclNfsV2Read1KCalls	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of NFS Version 2 read calls 
+				with request sizes between 512-1023 bytes 
+				received from this client."
+	::= { pclEntry 91 }
+
+	pclNfsV2Read2KCalls	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of NFS Version 2 read calls 
+				with request sizes between 1K-2047 bytes 
+				received from this client."
+	::= { pclEntry 92 }
+
+	pclNfsV2Read4KCalls	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of NFS Version 2 read calls 
+				with request sizes between 2K-4095 bytes 
+				received from this client."
+	::= { pclEntry 93 }
+
+	pclNfsV2Read8KCalls	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of NFS Version 2 read calls 
+				with request sizes between 4K-8191 bytes 
+				received from this client."
+	::= { pclEntry 94 }
+
+	pclNfsV2Read16KCalls	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of NFS Version 2 read calls 
+				with request sizes between 8K-16383 bytes 
+				received from this client."
+	::= { pclEntry 95 }
+
+	pclNfsV2Read32KCalls	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of NFS Version 2 read calls 
+				with request sizes between 16K-32767 bytes 
+				received from this client."
+	::= { pclEntry 96 }
+
+	pclNfsV2Read64KCalls	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of NFS Version 2 read calls 
+				with request sizes between 32K-65535 bytes 
+				received from this client."
+	::= { pclEntry 97 }
+
+	pclNfsV2Read128KCalls	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of NFS Version 2 read calls 
+				with request sizes between 64K-131071 bytes 
+				received from this client."
+	::= { pclEntry 98 }
+
+	pclNfsV2Write512Calls	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of NFS Version 2 write calls
+				with request sizes between 0-511 bytes
+				received from this client."
+	::= { pclEntry 99 }
+
+	pclNfsV2Write1KCalls	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of NFS Version 2 write calls
+				with request sizes between 512-1023 bytes
+				received from this client."
+	::= { pclEntry 100 }
+
+	pclNfsV2Write2KCalls	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of NFS Version 2 write calls
+				with request sizes between 1K-2047 bytes
+				received from this client."
+	::= { pclEntry 101 }
+
+	pclNfsV2Write4KCalls	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of NFS Version 2 write calls
+				with request sizes between 2K-4095 bytes
+				received from this client."
+	::= { pclEntry 102 }
+
+	pclNfsV2Write8KCalls	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of NFS Version 2 write calls
+				with request sizes between 4K-8191 bytes
+				received from this client."
+	::= { pclEntry 103 }
+
+	pclNfsV2Write16KCalls	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of NFS Version 2 write calls
+				with request sizes between 8K-16383 bytes
+				received from this client."
+	::= { pclEntry 104 }
+
+	pclNfsV2Write32KCalls	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of NFS Version 2 write calls
+				with request sizes between 16K-32767 bytes
+				received from this client."
+	::= { pclEntry 105 }
+
+	pclNfsV2Write64KCalls	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of NFS Version 2 write calls
+				with request sizes between 32K-65535 bytes
+				received from this client."
+	::= { pclEntry 106 }
+
+	pclNfsV2Write128KCalls	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of NFS Version 2 write calls
+				with request sizes between 64K-131071 bytes
+				received from this client."
+	::= { pclEntry 107 }
+
+	pclNfsV3Read512Calls	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of NFS Version 3 read calls
+				with request sizes between 0-511 bytes
+				received from this client."
+	::= { pclEntry 108 }
+
+	pclNfsV3Read1KCalls	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of NFS Version 3 read calls
+				with request sizes between 512-1023 bytes
+				received from this client."
+	::= { pclEntry 109 }
+
+	pclNfsV3Read2KCalls	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of NFS Version 3 read calls
+				with request sizes between 1K-2047 bytes
+				received from this client."
+	::= { pclEntry 110 }
+
+	pclNfsV3Read4KCalls	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of NFS Version 3 read calls
+				with request sizes between 2K-4095 bytes
+				received from this client."
+	::= { pclEntry 111 }
+
+	pclNfsV3Read8KCalls	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of NFS Version 3 read calls
+				with request sizes between 4K-8191 bytes
+				received from this client."
+	::= { pclEntry 112 }
+
+	pclNfsV3Read16KCalls	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of NFS Version 3 read calls
+				with request sizes between 8K-16383 bytes
+				received from this client."
+	::= { pclEntry 113 }
+
+	pclNfsV3Read32KCalls	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of NFS Version 3 read calls
+				with request sizes between 16K-32767 bytes
+				received from this client."
+	::= { pclEntry 114 }
+
+	pclNfsV3Read64KCalls	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of NFS Version 3 read calls
+				with request sizes between 32K-65535 bytes
+				received from this client."
+	::= { pclEntry 115 }
+
+	pclNfsV3Read128KCalls	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of NFS Version 3 read calls
+				with request sizes between 64K-131071 bytes
+				received from this client."
+	::= { pclEntry 116 }
+
+	pclNfsV3Write512Calls	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of NFS Version 3 write calls
+				with request sizes between 0-511 bytes
+				received from this client."
+	::= { pclEntry 117 }
+
+	pclNfsV3Write1KCalls	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of NFS Version 3 write calls
+				with request sizes between 512-1023 bytes
+				received from this client."
+	::= { pclEntry 118 }
+
+	pclNfsV3Write2KCalls	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of NFS Version 3 write calls
+				with request sizes between 1K-2047 bytes
+				received from this client."
+	::= { pclEntry 119 }
+
+	pclNfsV3Write4KCalls	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of NFS Version 3 write calls
+				with request sizes between 2K-4095 bytes
+				received from this client."
+	::= { pclEntry 120 }
+
+	pclNfsV3Write8KCalls	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of NFS Version 3 write calls
+				with request sizes between 4K-8191 bytes
+				received from this client."
+	::= { pclEntry 121 }
+
+	pclNfsV3Write16KCalls	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of NFS Version 3 write calls
+				with request sizes between 8K-16383 bytes
+				received from this client."
+	::= { pclEntry 122 }
+
+	pclNfsV3Write32KCalls	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of NFS Version 3 write calls
+				with request sizes between 16K-32767 bytes
+				received from this client."
+	::= { pclEntry 123 }
+
+	pclNfsV3Write64KCalls	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of NFS Version 3 write calls
+				with request sizes between 32K-65535 bytes
+				received from this client."
+	::= { pclEntry 124 }
+
+	pclNfsV3Write128KCalls	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of NFS Version 3 write calls
+				with request sizes between 64K-131071 bytes
+				received from this client."
+	::= { pclEntry 125 }
+
+
+	pclNumber		OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Number of entries in the pclTable table."
+
+	::= { nfsPerClient 2 }
+
+
+
+	-- the totNfs group
+
+		-- this group contains the NFS statistics since the
+		-- last boot
+
+	trpcServ	OBJECT IDENTIFIER ::= { totNfs 1 }
+
+	tnfsServ	OBJECT IDENTIFIER ::= { totNfs 2 }
+
+
+
+	-- the trpcServ group
+
+ 	trpcCalls	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The total number of RPC calls received,
+			 since the last boot."
+	::= { trpcServ 1 }
+
+	trpcBadCalls	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The total number of calls rejected by the RPC
+			 layer, since the last boot."
+	::= { trpcServ 2 }
+
+	trpcNullRecvs	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of times an RPC call was not
+			 available when it was thought to be received,
+			 since the last boot."
+	::= { trpcServ 3 }
+
+	trpcBadLens	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of RPC calls received with a length
+			 shorter than a minimum-sized RPC call, since
+			 the last boot."
+	::= { trpcServ 4 }
+
+	trpcServXDRCalls OBJECT-TYPE
+	SYNTAX		 Counter
+	ACCESS		 read-only
+	STATUS		 mandatory
+	DESCRIPTION
+			"The number of RPC calls received whose header
+			 could not be XDR decoded, since the last boot."
+	::= { trpcServ 5 }
+
+
+
+	-- the tnfsServ group
+
+	tnfsCalls	 OBJECT-TYPE
+	SYNTAX		 Counter
+	ACCESS		 read-only
+	STATUS		 mandatory
+	DESCRIPTION
+			 "The total number of NFS calls received, since
+			  last boot."
+	::= { tnfsServ 1 }
+
+	tnfsServBadCalls OBJECT-TYPE
+	SYNTAX		 Counter
+	ACCESS		 read-only
+	STATUS		 mandatory
+	DESCRIPTION
+			 "The total number of received NFS calls rejected,
+			  since last boot."
+	::= { tnfsServ 2 }
+
+	tnfsV2		OBJECT IDENTIFIER ::= { tnfsServ 3 }
+
+	tnfsV3		OBJECT IDENTIFIER ::= { tnfsServ 4 }
+
+	treplyCache	OBJECT IDENTIFIER ::= { tnfsServ 5 }
+	
+	tnfsrwStats 	OBJECT IDENTIFIER ::= { tnfsServ 6 }
+
+
+
+	-- the tnfsV2 group
+
+		-- this group contains statistics for NFS
+		-- Version 2 calls processed since the last boot
+
+	tv2Calls		OBJECT IDENTIFIER ::= { tnfsV2 1 }
+
+	tv2Percent		OBJECT IDENTIFIER ::= { tnfsV2 2 }
+
+	tv2CachedCalls		OBJECT IDENTIFIER ::= { tnfsV2 3 }
+
+	tv2CachedPerCent	OBJECT IDENTIFIER ::= { tnfsV2 4 }
+	
+
+	-- the tv2Calls group
+
+		-- this group contains statistics for the number of
+		-- calls received for each NFS Version 2 procedure
+		-- since the last boot
+
+	tv2cNulls	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_NULL (Do Nothing) procedure,
+			 since the last boot."
+	::= { tv2Calls 1 }
+
+	tv2cGetattrs	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_GETATTR (Get File Attributes)
+			 procedure, since the last boot."
+	::= { tv2Calls 2 }
+
+	tv2cSetattrs	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_SETATTR (Set File Attributes)
+			 procedure, since the the last boot."
+	::= { tv2Calls 3 }
+
+	tv2cRoots	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_ROOT (Get Filesystem Root)
+			 procedure, since the last boot."
+	::= { tv2Calls 4 }
+
+	tv2cLookups	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_LOOKUP (Look Up File Name)
+			 procedure, since the last boot."
+	::= { tv2Calls 5 }
+
+	tv2cReadlinks	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_READLINK (Read From Symbolic
+			 Link) procedure, since the last boot."
+	::= { tv2Calls 6 }
+
+	tv2cReads	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_READ (Read From File)
+			 procedure, since the last boot."
+	::= { tv2Calls 7 }
+
+	tv2cWrcaches	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_WRITECACHE (Write to Cache)
+			 procedure, since the last boot."
+	::= { tv2Calls 8 }
+
+	tv2cWrites	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_WRITE (Write to File)
+			 procedure, since the last boot."
+	::= { tv2Calls 9 }
+
+	tv2cCreates	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_CREATE (Create File)
+			 procedure, since the last boot."
+	::= { tv2Calls 10 }
+
+	tv2cRemoves	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_REMOVE (Remove File)
+			 procedure, since the last boot."
+	::= { tv2Calls 11 }
+
+	tv2cRenames	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_RENAME (Rename File)
+			 procedure, since the last boot."
+	::= { tv2Calls 12 }
+
+	tv2cLinks	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_LINK (Create Link to File)
+			 procedure, since the last boot."
+	::= { tv2Calls 13 }
+
+	tv2cSymlinks	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_SYMLINK (Create Symbolic Link)
+			 procedure, since the last boot."
+	::= { tv2Calls 14 }
+
+	tv2cMkdirs	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_MKDIR (Create Directory)
+			 procedure, since the last boot."
+	::= { tv2Calls 15 }
+
+	tv2cRmdirs	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_RMDIR (Remove Directory)
+			 procedure, since the last boot."
+	::= { tv2Calls 16 }
+
+	tv2cReaddirs	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_READDIR (Read From Directory)
+			 procedure, since the last boot."
+	::= { tv2Calls 17 }
+
+	tv2cStatfss	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_STATFS (Get Filesystem
+			 Attributes) procedure, since the last boot."
+	::= { tv2Calls 18 }
+
+
+
+	-- the tv2Percent group
+
+		-- this group contains statistics for the number of
+		-- calls received for each NFS Version 2 procedure,
+		-- as a percentage of total NFS calls received,
+		-- since the last boot
+
+	tv2pNulls	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_NULL (Do Nothing) procedure
+			 as a percentage of total NFS calls received,
+			 since the last boot."
+	::= { tv2Percent 1 }
+
+	tv2pGetattrs	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_GETATTR (Get File Attributes)
+			 procedure as a percentage of total NFS calls
+			 received, since the last boot."
+	::= { tv2Percent 2 }
+
+	tv2pSetattrs	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_SETATTR (Set File Attributes)
+			 procedure as a percentage of total NFS calls
+			 received, since the last boot."
+	::= { tv2Percent 3 }
+
+	tv2pRoots	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_ROOT (Get Filesystem Root)
+			 procedure as a percentage of total NFS calls
+			 received, since the last boot."
+	::= { tv2Percent 4 }
+
+	tv2pLookups	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_LOOKUP (Look Up File Name)
+			 procedure as a percentage of total NFS calls
+			 received, since the last boot."
+	::= { tv2Percent 5 }
+
+	tv2pReadlinks	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_READLINK (Read From Symbolic
+			 Link) procedure as a percentage of total NFS
+			 calls received, since the last boot."
+	::= { tv2Percent 6 }
+
+	tv2pReads	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_READ (Read From File)
+			 procedure as a percentage of total NFS calls
+			 received, since the last boot."
+	::= { tv2Percent 7 }
+
+	tv2pWrcaches	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_WRITECACHE (Write to Cache)
+			 procedure as a percentage of total NFS calls
+			 received, since the last boot."
+	::= { tv2Percent 8 }
+
+	tv2pWrites	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_WRITE (Write to File)
+			 procedure as a percentage of total NFS calls
+			 received, since the last boot."
+	::= { tv2Percent 9 }
+
+	tv2pCreates	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_CREATE (Create File)
+			 procedure as a percentage of total NFS calls
+			 received, since the last boot."
+	::= { tv2Percent 10 }
+
+	tv2pRemoves	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_REMOVE (Remove File)
+			 procedure as a percentage of total NFS calls
+			 received, since the last boot."
+	::= { tv2Percent 11 }
+
+	tv2pRenames	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_RENAME (Rename File)
+			 procedure as a percentage of total NFS calls
+			 received, since the last boot."
+	::= { tv2Percent 12 }
+
+	tv2pLinks	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_LINK (Create Link to File)
+			 procedure as a percentage of total NFS calls
+			 received, since the last boot."
+	::= { tv2Percent 13 }
+
+	tv2pSymlinks	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_SYMLINK (Create Symbolic Link)
+			 procedure as a percentage of total NFS calls
+			 received, since the last boot."
+	::= { tv2Percent 14 }
+
+	tv2pMkdirs	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_MKDIR (Create Directory)
+			 procedure as a percentage of total NFS calls
+			 received, since the last boot."
+	::= { tv2Percent 15 }
+
+	tv2pRmdirs	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_RMDIR (Remove Directory)
+			 procedure as a percentage of total NFS calls
+			 received, since the last boot."
+	::= { tv2Percent 16 }
+
+	tv2pReaddirs	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_READDIR (Read From Directory)
+			 procedure as a percentage of total NFS calls
+			 received, since the last boot."
+	::= { tv2Percent 17 }
+
+	tv2pStatfss	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_STATFS (Get Filesystem
+			 Attributes) procedure as a percentage of
+			 total NFS calls received, since the last boot."
+	::= { tv2Percent 18 }
+
+
+
+	-- the tv2CachedCalls group
+
+		-- this group contains statistics for the number of
+		-- calls received for each NFS Version 2 procedure,
+		-- that did not result in the filesystem blocking to
+		-- read from disk, since the last boot
+
+	tv2ccNulls	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_NULL (Do Nothing) procedure,
+			 that did not result in the filesystem blocking
+			 to read from disk, since the last boot."
+	::= { tv2CachedCalls 1 }
+
+	tv2ccGetattrs	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_GETATTR (Get File Attributes)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk, 
+			 since the last boot."
+	::= { tv2CachedCalls 2 }
+
+	tv2ccSetattrs	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_SETATTR (Set File Attributes)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk,
+			 since the last boot."
+	::= { tv2CachedCalls 3 }
+
+	tv2ccRoots	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_ROOT (Get Filesystem Root)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk,
+			 since the last boot."
+	::= { tv2CachedCalls 4 }
+
+	tv2ccLookups	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_LOOKUP (Look Up File Name)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk,
+			 since the last boot."
+	::= { tv2CachedCalls 5 }
+
+	tv2ccReadlinks	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_READLINK (Read From Symbolic
+			 Link) procedure, that did not result in the
+			 filesystem blocking to read from disk, 
+			 since the last boot."
+	::= { tv2CachedCalls 6 }
+
+	tv2ccReads	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_READ (Read From File)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk,
+			 since the last boot."
+	::= { tv2CachedCalls 7 }
+
+	tv2ccWrcaches	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_WRITECACHE (Write to Cache)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk,
+			 since the last boot."
+	::= { tv2CachedCalls 8 }
+
+	tv2ccWrites	OBJECT-TYPE
+	SYNTAX		Counter
+        ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_WRITE (Write to File)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk,
+			 since the last boot."
+	::= { tv2CachedCalls 9 }
+
+	tv2ccCreates	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_CREATE (Create File)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk,
+			 since the last boot."
+	::= { tv2CachedCalls 10 }
+
+	tv2ccRemoves	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_REMOVE (Remove File)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk,
+			 since the last boot."
+	::= { tv2CachedCalls 11 }
+
+	tv2ccRenames	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_RENAME (Rename File)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk,
+			 since the last boot."
+	::= { tv2CachedCalls 12 }
+
+	tv2ccLinks	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_LINK (Create Link to File)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk,
+			 since the last boot."
+	::= { tv2CachedCalls 13 }
+
+	tv2ccSymlinks	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_SYMLINK (Create Symbolic Link)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk,
+			 since the last boot."
+	::= { tv2CachedCalls 14 }
+
+	tv2ccMkdirs	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_MKDIR (Create Directory)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk,
+			 since the last boot."
+	::= { tv2CachedCalls 15 }
+
+	tv2ccRmdirs	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_RMDIR (Remove Directory)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk,
+			 since the last boot."
+	::= { tv2CachedCalls 16 }
+
+	tv2ccReaddirs	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_READDIR (Read From Directory)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk,
+			 since the last boot."
+	::= { tv2CachedCalls 17 }
+
+	tv2ccStatfss	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_STATFS (Get Filesystem
+			 Attributes) procedure, that did not result
+			 in the filesystem blocking to read from disk,
+			 since the last boot."
+	::= { tv2CachedCalls 18 }
+
+
+
+	-- the tv2CachedPerCent group
+
+		-- this group contains statistics for the number of
+		-- calls received for each NFS Version 2 procedure,
+		-- that did not result in the filesystem blocking to
+		-- read from disk, as a percentage of the total
+		-- number of calls received for that procedure,
+		-- since the last boot
+
+	tv2cpNulls	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_NULL (Do Nothing) procedure,
+			 that did not result in the filesystem
+			 blocking to read from disk, as a percentage
+			 of the total number of calls received for
+			 this procedure, since the last boot."
+	::= { tv2CachedPerCent 1 }
+
+	tv2cpGetattrs	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_GETATTR (Get File Attributes)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk, as a
+			 percentage of the total number of calls
+			 received for this procedure, since the last boot."
+	::= { tv2CachedPerCent 2 }
+
+	tv2cpSetattrs	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_SETATTR (Set File Attributes)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk, as a
+			 percentage of the total number of calls
+			 received for this procedure, since the last boot."
+	::= { tv2CachedPerCent 3 }
+
+	tv2cpRoots	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_ROOT (Get Filesystem Root)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk, as a
+			 percentage of the total number of calls
+			 received for this procedure, since the last boot."
+	::= { tv2CachedPerCent 4 }
+
+	tv2cpLookups	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_LOOKUP (Look Up File Name)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk, as a
+			 percentage of the total number of calls
+			 received for this procedure, since the last boot."
+	::= { tv2CachedPerCent 5 }
+
+	tv2cpReadlinks	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_READLINK (Read From Symbolic
+			 Link) procedure, that did not result in the
+			 filesystem blocking to read from disk, as a
+			 percentage of the total number of calls
+			 received for this procedure, since the last boot."
+	::= { tv2CachedPerCent 6 }
+
+	tv2cpReads	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_READ (Read From File)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk, as a
+			 percentage of the total number of calls
+			 received for this procedure, since the last boot."
+	::= { tv2CachedPerCent 7 }
+
+	tv2cpWrcaches	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_WRITECACHE (Write to Cache)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk, as a
+			 percentage of the total number of calls
+			 received for this procedure, since the last boot."
+	::= { tv2CachedPerCent 8 }
+
+	tv2cpWrites	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_WRITE (Write to File)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk, as a
+			 percentage of the total number of calls
+			 received for this procedure, since the last boot."
+	::= { tv2CachedPerCent 9 }
+
+	tv2cpCreates	OBJECT-TYPE
+	SYNTAX          INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_CREATE (Create File)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk, as a
+			 percentage of the total number of calls
+			 received for this procedure, since the last boot."
+	::= { tv2CachedPerCent 10 }
+
+	tv2cpRemoves	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_REMOVE (Remove File)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk, as a
+			 percentage of the total number of calls
+			 received for this procedure, since the last boot."
+	::= { tv2CachedPerCent 11 }
+
+	tv2cpRenames	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_RENAME (Rename File)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk, as a
+			 percentage of the total number of calls
+			 received for this procedure, since the last boot."
+	::= { tv2CachedPerCent 12 }
+
+	tv2cpLinks	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_LINK (Create Link to File)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk, as a
+			 percentage of the total number of calls
+			 received for this procedure, since the last boot."
+	::= { tv2CachedPerCent 13 }
+
+	tv2cpSymlinks	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_SYMLINK (Create Symbolic
+			 Link) procedure, that did not result in the
+			 filesystem blocking to read from disk, as a
+			 percentage of the total number of calls
+			 received for this procedure, since the last boot."
+	::= { tv2CachedPerCent 14 }
+
+	tv2cpMkdirs	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_MKDIR (Create Directory)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk, as a
+			 percentage of the total number of calls
+			 received for this procedure, since the last boot."
+	::= { tv2CachedPerCent 15 }
+
+	tv2cpRmdirs	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_RMDIR (Remove Directory)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk, as a
+			 percentage of the total number of calls
+			 received for this procedure, since the last boot."
+	::= { tv2CachedPerCent 16 }
+
+	tv2cpReaddirs	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_READDIR (Read From Directory)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk, as a
+			 percentage of the total number of calls
+			 received for this procedure, since the last boot."
+	::= { tv2CachedPerCent 17 }
+
+	tv2cpStatfss	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 calls received
+			 for the NFSPROC_STATFS (Get Filesystem
+			 Attributes) procedure, that did not result
+			 in the filesystem blocking to read from
+			 disk, as a percentage of the total number
+			 of calls received for this procedure, 
+			 since the last boot."
+	::= { tv2CachedPerCent 18 }
+
+
+	-- the tnfsV3 group
+
+		-- this group contains statistics for NFS
+		-- Version 3 calls processed since the last boot
+
+	tv3Calls		OBJECT IDENTIFIER ::= { tnfsV3 1 }
+
+	tv3Percent		OBJECT IDENTIFIER ::= { tnfsV3 2 }
+
+	tv3CachedCalls		OBJECT IDENTIFIER ::= { tnfsV3 3 }
+
+	tv3CachedPerCent	OBJECT IDENTIFIER ::= { tnfsV3 4 }
+	
+
+	-- the tv3Calls group
+
+		-- this group contains statistics for the number of
+		-- calls received for each NFS Version 3 procedure
+		-- since the last boot
+
+	tv3cNulls	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_NULL (Do Nothing) procedure,
+			 since the last boot."
+	::= { tv3Calls 1 }
+
+	tv3cGetattrs	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_GETATTR (Get File Attributes)
+			 procedure, since the last boot."
+	::= { tv3Calls 2 }
+
+	tv3cSetattrs	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_SETATTR (Set File Attributes)
+			 procedure, since the last boot."
+	::= { tv3Calls 3 }
+
+	tv3cLookups	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_LOOKUP (Lookup Filename)
+			 procedure, since the last boot."
+	::= { tv3Calls 4 }
+
+	tv3cAccesss	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_ACCESS (Check Access Permission)
+			 procedure, since the last boot."
+	::= { tv3Calls 5 }
+
+	tv3cReadlinks	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_READLINK (Read from Symbolic
+			 Link) procedure, since the last boot."
+	::= { tv3Calls 6 }
+
+	tv3cReads	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_READ (Read From File)
+			 procedure, since the last boot."
+	::= { tv3Calls 7 }
+
+	tv3cWrites	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_WRITE (Write to File)
+			 procedure, since the last boot."
+	::= { tv3Calls 8 }
+
+	tv3cCreates	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_CREATE (Create a File)
+			 procedure, since the last boot."
+	::= { tv3Calls 9 }
+
+	tv3cMkdirs	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_MKDIR (Create a Directory)
+			 procedure, since the last boot."
+	::= { tv3Calls 10 }
+
+	tv3cSymlinks	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_SYMLINK (Create a Symbolic
+			 Link) procedure, since the last boot."
+	::= { tv3Calls 11 }
+
+	tv3cMknods	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_MKNOD (Create a Special
+			 Device) procedure, since the last boot."
+	::= { tv3Calls 12 }
+
+	tv3cRemoves	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_REMOVE (Remove a File)
+			 procedure, since the last boot."
+	::= { tv3Calls 13 }
+
+	tv3cRmdirs	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_RMDIR (Remove a Directory)
+			 procedure, since the last boot."
+	::= { tv3Calls 14 }
+
+	tv3cRenames	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_RENAME (Rename a File or
+			 Directory) procedure, since the last boot."
+	::= { tv3Calls 15 }
+
+	tv3cLinks	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_LINK (Create Link to an
+			 Object) procedure, since the last boot."
+	::= { tv3Calls 16 }
+
+	tv3cReaddirs	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_READDIR (Read From Directory)
+			 procedure, since the last boot."
+	::= { tv3Calls 17 }
+
+	tv3cReaddirPluss OBJECT-TYPE
+	SYNTAX		 Counter
+	ACCESS		 read-only
+	STATUS		 mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_READDIRPLUS (Extended Read
+			 from Directory) procedure, since the last boot."
+	::= { tv3Calls 18 }
+
+	tv3cFsstats	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_FSSTAT (Get Dynamic File
+			 System Information) procedure, since the
+			 last boot."
+	::= { tv3Calls 19 }
+
+	tv3cFsinfos	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_FSINFO (Get Static File System
+			 Information) procedure, since the last boot."
+	::= { tv3Calls 20 }
+
+	tv3cPathconfs	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_PATHCONF (Retrieve POSIX
+			 Information) procedure, since the last boot."
+	::= { tv3Calls 21 }
+
+	tv3cCommits	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_COMMIT (Commit Cached Data on
+			 a Server to Stable Storage) procedure, since
+			 the last boot."
+	::= { tv3Calls 22 }
+
+
+
+	-- the tv3Percent group
+
+		-- this group contains statistics for the number of
+		-- calls received for each NFS Version 3 procedure,
+		-- as a percentage of total NFS calls received,
+		-- since the last boot
+
+	tv3pNulls	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_NULL (Do Nothing) procedure,
+			 as a percentage of the total NFS calls
+			 received, since the last boot."
+	::= { tv3Percent 1 }
+
+	tv3pGetattrs	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_GETATTR (Get File Attributes)
+			 procedure, as a percentage of the total NFS
+			 calls received, since the last boot."
+	::= { tv3Percent 2 }
+
+	tv3pSetattrs	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_SETATTR (Set File Attributes)
+			 procedure, as a percentage of the total NFS
+			 calls received, since the last boot."
+	::= { tv3Percent 3 }
+
+	tv3pLookups	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_LOOKUP (Lookup Filename)
+			 procedure, as a percentage of the total NFS
+			 calls received, since the last boot."
+	::= { tv3Percent 4 }
+
+	tv3pAccesss	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_ACCESS (Check Access
+			 Permission) procedure, as a percentage of
+			 the total NFS calls received, since the last boot."
+	::= { tv3Percent 5 }
+
+	tv3pReadlinks	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_READLINK (Read from Symbolic
+			 Link) procedure, as a percentage of the total
+			 NFS calls received, since the last boot."
+	::= { tv3Percent 6 }
+
+	tv3pReads	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_READ (Read From File)
+			 procedure, as a percentage of the total NFS
+			 calls received, since the last boot."
+	::= { tv3Percent 7 }
+
+	tv3pWrites	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_WRITE (Write to File)
+			 procedure, as a percentage of the total NFS
+			 calls received, since the last boot."
+	::= { tv3Percent 8 }
+
+	tv3pCreates	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_CREATE (Create a File)
+			 procedure, as a percentage of the total NFS
+			 calls received, since the last boot."
+	::= { tv3Percent 9 }
+
+	tv3pMkdirs	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_MKDIR (Create a Directory)
+			 procedure, as a percentage of the total NFS
+			 calls received, since the last boot."
+	::= { tv3Percent 10 }
+
+	tv3pSymlinks	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_SYMLINK (Create a Symbolic
+			 Link) procedure, as a percentage of the total
+			 NFS calls received, since the last boot."
+	::= { tv3Percent 11 }
+
+	tv3pMknods	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_MKNOD (Create a Special
+			 Device) procedure, as a percentage of the
+			 total NFS calls received, since the last boot."
+	::= { tv3Percent 12 }
+
+	tv3pRemoves	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_REMOVE (Remove a File)
+			 procedure, as a percentage of the total NFS
+			 calls received, since the last boot."
+	::= { tv3Percent 13 }
+
+	tv3pRmdirs	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_RMDIR (Remove a Directory)
+			 procedure, as a percentage of the total NFS
+			 calls received, since the last boot."
+	::= { tv3Percent 14 }
+
+	tv3pRenames	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100) ACCESS          read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_RENAME (Rename a File or
+			 Directory) procedure, as a percentage of
+			 the total NFS calls received, since the
+			 last boot."
+	::= { tv3Percent 15 }
+
+	tv3pLinks	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_LINK (Create Link to an
+			 Object) procedure, as a percentage of
+			 the total NFS calls received, since the
+			 last boot."
+	::= { tv3Percent 16 }
+
+	tv3pReaddirs	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_READDIR (Read From Directory)
+			 procedure, as a percentage of the total NFS
+			 calls received, since the last boot."
+	::= { tv3Percent 17 }
+
+	tv3pReaddirPluss OBJECT-TYPE
+	SYNTAX		 INTEGER (0..100)
+	ACCESS		 read-only
+	STATUS		 mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_READDIRPLUS (Extended Read
+			 from Directory) procedure, as a percentage
+			 of the total NFS calls received, since the
+			 last boot."
+	::= { tv3Percent 18 }
+
+	tv3pFsstats	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_FSSTAT (Get Dynamic File
+			 System Information) procedure, as a percentage
+			 of the total NFS calls received, since the
+			 last boot."
+	::= { tv3Percent 19 }
+
+	tv3pFsinfos	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_FSINFO (Get Static File System
+			 Information) procedure, as a percentage of the
+			 total NFS calls received, since the last boot."
+	::= { tv3Percent 20 }
+
+	tv3pPathconfs	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_PATHCONF (Retrieve POSIX
+			 Information) procedure, as a percentage of the
+			 total NFS calls received, since the last boot."
+	::= { tv3Percent 21 }
+
+	tv3pCommits	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_COMMIT (Commit Cached Data on
+			 a Server to Stable Storage) procedure, as a
+			 percentage of the total NFS calls received,
+			 since the last boot."
+	::= { tv3Percent 22 }
+
+
+
+	-- the tv3CachedCalls group
+
+		-- this group contains statistics for the number of
+		-- calls received for each NFS Version 3 procedure,
+		-- that did not result in the filesystem blocking to
+		-- read from disk, since the last boot
+
+	tv3ccNulls	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_NULL (Do Nothing) procedure,
+			 that did not result in the filesystem blocking
+			 to read from disk, since the last boot."
+	::= { tv3CachedCalls 1 }
+
+	tv3ccGetattrs	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_GETATTR (Get File Attributes)
+			 procedure, that did not result in the filesystem
+			 blocking to read from disk, since the last boot."
+	::= { tv3CachedCalls 2 }
+
+	tv3ccSetattrs	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_SETATTR (Set File Attributes)
+			 procedure, that did not result in the filesystem
+			 blocking to read from disk, since the last boot."
+	::= { tv3CachedCalls 3 }
+
+	tv3ccLookups	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_LOOKUP (Lookup Filename)
+			 procedure, that did not result in the filesystem
+			 blocking to read from disk, since the last boot."
+	::= { tv3CachedCalls 4 }
+
+	tv3ccAccesss	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_ACCESS (Check Access Permission)
+			 procedure, that did not result in the filesystem
+			 blocking to read from disk, since the last boot."
+	::= { tv3CachedCalls 5 }
+
+	tv3ccReadlinks	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_READLINK (Read from Symbolic
+			 Link) procedure, that did not result in the
+			 filesystem blocking to read from disk, since
+			 the last boot."
+	::= { tv3CachedCalls 6 }
+
+	tv3ccReads	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_READ (Read From File)
+			 procedure, that did not result in the filesystem
+			 blocking to read from disk, since the last boot."
+	::= { tv3CachedCalls 7 }
+
+	tv3ccWrites	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_WRITE (Write to File)
+			 procedure, that did not result in the filesystem
+			 blocking to read from disk, since the last boot."
+	::= { tv3CachedCalls 8 }
+
+	tv3ccCreates	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_CREATE (Create a File)
+			 procedure, that did not result in the filesystem
+			 blocking to read from disk, since the last boot."
+	::= { tv3CachedCalls 9 }
+
+	tv3ccMkdirs	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_MKDIR (Create a Directory)
+			 procedure, that did not result in the filesystem
+			 blocking to read from disk, since the last boot."
+	::= { tv3CachedCalls 10 }
+
+	tv3ccSymlinks	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_SYMLINK (Create a Symbolic
+			 Link) procedure, that did not result in the
+			 filesystem blocking to read from disk, since
+			 the last boot."
+	::= { tv3CachedCalls 11 }
+
+	tv3ccMknods	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_MKNOD (Create a Special
+			 Device) procedure, that did not result in the
+			 filesystem blocking to read from disk, since
+			 the last boot."
+	::= { tv3CachedCalls 12 }
+
+	tv3ccRemoves	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_REMOVE (Remove a File)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk, 
+			 since the last boot."
+	::= { tv3CachedCalls 13 }
+
+	tv3ccRmdirs	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_RMDIR (Remove a Directory)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk,
+			 since the last boot."
+	::= { tv3CachedCalls 14 }
+
+	tv3ccRenames	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_RENAME (Rename a File or
+			 Directory) procedure, that did not result in
+			 the filesystem blocking to read from disk,
+			 since the last boot."
+	::= { tv3CachedCalls 15 }
+
+	tv3ccLinks	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_LINK (Create Link to an
+			 Object) procedure, that did not result in
+			 the filesystem blocking to read from disk, 
+			 since the last boot."
+	::= { tv3CachedCalls 16 }
+
+	tv3ccReaddirs	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_READDIR (Read From
+			 Directory) procedure, that did not result in
+			 the filesystem blocking to read from disk, 
+			 since the last boot."
+	::= { tv3CachedCalls 17 }
+
+	tv3ccReaddirPluss OBJECT-TYPE
+	SYNTAX		  Counter
+	ACCESS		  read-only
+	STATUS		  mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_READDIRPLUS (Extended Read
+			 from Directory) procedure, that did not result in
+			 the filesystem blocking to read from disk, 
+			 since the last boot."
+	::= { tv3CachedCalls 18 }
+
+	tv3ccFsstats	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_FSSTAT (Get Dynamic File
+			 System Information) procedure, that did not
+			 result in the filesystem blocking to read
+			 from disk, since the last boot."
+	::= { tv3CachedCalls 19 }
+
+	tv3ccFsinfos	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS          read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_FSINFO (Get Static File
+			 System Information) procedure, that did not
+			 result in the filesystem blocking to read
+			 from disk, since the last boot."
+	::= { tv3CachedCalls 20 }
+
+	tv3ccPathconfs	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_PATHCONF (Retrieve POSIX
+			 Information) procedure, that did not result
+			 in the filesystem blocking to read from disk,
+			 since the last boot."
+	::= { tv3CachedCalls 21 }
+
+	tv3ccCommits	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_COMMIT (Commit Cached Data on
+			 a Server to Stable Storage) procedure, that did
+			 not result in the filesystem blocking to read
+			 from disk, since the last boot."
+	::= { tv3CachedCalls 22 }
+
+
+
+	-- the tv3CachedPerCent group
+
+		-- this group contains statistics for the number of
+		-- calls received for each NFS Version 3 procedure,
+		-- that did not result in the filesystem blocking to
+		-- read from disk, as a percentage of the total
+		-- number of calls received for that procedure,
+		-- since the last boot
+
+	tv3cpNulls	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_NULL (Do Nothing) procedure,
+			 that did not result in the filesystem
+			 blocking to read from disk, as a percentage
+			 of the total number of calls received for
+			 this procedure, since the last boot."
+	::= { tv3CachedPerCent 1 }
+
+	tv3cpGetattrs	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_GETATTR (Get File Attributes)
+			 procedure, that did not result in the filesystem
+			 blocking to read from disk, as a percentage
+			 of the total number of calls received for
+			 this procedure, since the last boot."
+	::= { tv3CachedPerCent 2 }
+
+	tv3cpSetattrs	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_SETATTR (Set File Attributes)
+			 procedure, that did not result in the filesystem
+			 blocking to read from disk, as a percentage
+			 of the total number of calls received for
+			 this procedure, since the last boot."
+	::= { tv3CachedPerCent 3 }
+
+	tv3cpLookups	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_LOOKUP (Lookup Filename)
+			 procedure, that did not result in the filesystem
+			 blocking to read from disk, as a percentage
+			 of the total number of calls received for
+			 this procedure, since the last boot."
+	::= { tv3CachedPerCent 4 }
+
+	tv3cpAccesss	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_ACCESS (Check Access Permission)
+			 procedure, that did not result in the filesystem
+			 blocking to read from disk, as a percentage
+			 of the total number of calls received for
+			 this procedure, since the last boot."
+	::= { tv3CachedPerCent 5 }
+
+	tv3cpReadlinks	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_READLINK (Read from Symbolic
+			 Link) procedure, that did not result in the
+			 filesystem blocking to read from disk, as a
+			 percentage of the total number of calls
+			 received for this procedure, since the last
+			 last boot."
+	::= { tv3CachedPerCent 6 }
+
+	tv3cpReads	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_READ (Read From File)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk, as a
+			 percentage of the total number of calls
+			 received for this procedure, since the last boot."
+	::= { tv3CachedPerCent 7 }
+
+	tv3cpWrites	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_WRITE (Write to File)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk, as a
+			 percentage of the total number of calls
+			 received for this procedure, since the last boot."
+	::= { tv3CachedPerCent 8 }
+
+	tv3cpCreates	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_CREATE (Create a File)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk, as a
+			 percentage of the total number of calls
+			 received for this procedure, since the last boot."
+	::= { tv3CachedPerCent 9 }
+
+	tv3cpMkdirs	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_MKDIR (Create a Directory)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk, as a
+			 percentage of the total number of calls
+			 received for this procedure, since the last boot."
+	::= { tv3CachedPerCent 10 }
+
+	tv3cpSymlinks	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_SYMLINK (Create a Symbolic
+			 Link) procedure, that did not result in the
+			 filesystem blocking to read from disk, as a
+			 percentage of the total number of calls
+			 received for this procedure, since the last boot."
+	::= { tv3CachedPerCent 11 }
+
+	tv3cpMknods	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_MKNOD (Create a Special
+			 Device) procedure, that did not result in the
+			 filesystem blocking to read from disk, as a
+			 percentage of the total number of calls
+			 received for this procedure, since the last boot."
+	::= { tv3CachedPerCent 12 }
+
+	tv3cpRemoves	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_REMOVE (Remove a File)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk, as a
+			 percentage of the total number of calls
+			 received for this procedure, since the last boot."
+	::= { tv3CachedPerCent 13 }
+
+	tv3cpRmdirs	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_RMDIR (Remove a Directory)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk, as a
+			 percentage of the total number of calls
+			 received for this procedure, since the last boot."
+	::= { tv3CachedPerCent 14 }
+
+	tv3cpRenames	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_RENAME (Rename a File or
+			 Directory) procedure, that did not result in
+			 the filesystem blocking to read from disk,
+			 as a percentage of the total number of calls
+			 received for this procedure, since the last boot."
+	::= { tv3CachedPerCent 15 }
+
+	tv3cpLinks	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_LINK (Create Link to an
+			 Object) procedure, that did not result in
+			 the filesystem blocking to read from disk,
+			 as a percentage of the total number of calls
+			 received for this procedure, since the last boot."
+	::= { tv3CachedPerCent 16 }
+
+	tv3cpReaddirs	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_READDIR (Read From Directory)
+			 procedure, that did not result in the
+			 filesystem blocking to read from disk, as a
+			 percentage of the total number of calls
+			 received for this procedure, since the last boot."
+	::= { tv3CachedPerCent 17 }
+
+	tv3cpReaddirPluss OBJECT-TYPE
+	SYNTAX		  INTEGER (0..100)
+	ACCESS		  read-only
+	STATUS		  mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_READIRPLUS (Extended Read
+			 from Directory) procedure, that did not result
+			 in the filesystem blocking to read from disk,
+			 as a percentage of the total number of calls
+			 received for this procedure, since the last boot."
+	::= { tv3CachedPerCent 18 }
+
+	tv3cpFsstats	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_FSSTAT (Get Dynamic File
+			 System Information) procedure, that did not
+			 result in the filesystem blocking to read from
+			 disk, as a percentage of the total number of
+			 calls received for this procedure, since the
+			 last boot."
+	::= { tv3CachedPerCent 19 }
+
+	tv3cpFsinfos	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_FSINFO (Get Static File System
+			 Information) procedure, that did not result
+			 in the filesystem blocking to read from disk,
+			 as a percentage of the total number of calls
+			 received for this procedure, since the last boot."
+	::= { tv3CachedPerCent 20 }
+
+	tv3cpPathconfs	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_PATHCONF (Retrieve POSIX
+			 Information) procedure, that did not result
+			 in the filesystem blocking to read from disk,
+			 as a percentage of the total number of calls
+			 received for this procedure, since the last boot."
+	::= { tv3CachedPerCent 21 }
+
+	tv3cpCommits	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 calls received
+			 for the NFSPROC3_COMMIT (Commit Cached Data on
+			 a Server to Stable Storage) procedure, that
+			 did not result in the filesystem blocking to
+			 read from disk, as a percentage of the total
+			 number of calls received for this procedure,
+			 since the last boot."
+	::= { tv3CachedPerCent 22 }
+
+
+	-- the treplyCache group
+
+		-- this group contains statistics related to the 
+		-- Reply Cache processing, since the last boot
+
+	trcInProgressHits OBJECT-TYPE
+	SYNTAX		  Counter
+	ACCESS		  read-only
+	STATUS		  mandatory
+	DESCRIPTION
+			"The number of NFS requests that were dropped, for
+			 calls already in progress, since the last boot."
+	::= { treplyCache 1 }
+
+	trcDelayHits	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		deprecated
+	DESCRIPTION
+			"The number of NFS requests that were dropped,
+			 for replies already generated within a short
+			 interval, since the last boot. These stats are 
+			 deprecated. A value of zero will always be 
+			 returned for these stats."
+	::= { treplyCache 2 }
+
+	trcMisses	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS requests received for which
+			 there were no corresponding entries already in
+			 the Reply Cache, since the last boot."
+	::= { treplyCache 3 }
+
+	trcNonIdemDoneHits OBJECT-TYPE
+	SYNTAX		   Counter
+	ACCESS		   read-only
+	STATUS		   mandatory
+	DESCRIPTION
+			"The number of NFS requests received that
+			 resulted in replies being replayed from
+			 the Reply Cache, since the last boot."
+	::= { treplyCache 4 }
+
+	trcNonIdemNotDoneHits OBJECT-TYPE
+	SYNTAX		      Counter
+	ACCESS		      read-only
+	STATUS		      mandatory
+	DESCRIPTION
+			"The number of NFS requests received for calls
+			 that resulted in this request being processed
+			 as a new request even when a corresponding
+			 entry existed in the Reply Cache, since the
+			 last boot."
+	::= { treplyCache 5 }
+
+	trcTcpInProgressHits OBJECT-TYPE
+	SYNTAX		  Counter
+	ACCESS		  read-only
+	STATUS		  mandatory
+	DESCRIPTION
+			"The number of NFS requests that were dropped
+			 for the TCP protocol, for calls already in
+			 progress, since the last boot."
+	::= { treplyCache 6 }
+
+	trcTcpDelayHits	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		deprecated
+	DESCRIPTION
+			"The number of NFS requests that were dropped
+			 for the TCP protocol, for replies already
+			 generated within a short interval, since the
+			 last boot. These stats are deprecated. A value 
+			 of zero will always be returned for these stats."
+	::= { treplyCache 7 }
+
+	trcTcpMisses	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION 
+			"The number of NFS requests received for the
+			 TCP protocol for which there were no corresponding
+			 entries already in the Reply Cache, since the
+			 last boot."
+	::= { treplyCache 8 }
+
+	trcTcpNonIdemDoneHits OBJECT-TYPE
+	SYNTAX		   Counter
+	ACCESS		   read-only
+	STATUS		   mandatory
+	DESCRIPTION
+			"The number of NFS requests received for the
+			 TCP protocol that resulted in replies being
+			 replayed from the Reply Cache, since the
+			 last boot."
+	::= { treplyCache 9 }
+
+	trcTcpNonIdemNotDoneHits OBJECT-TYPE
+	SYNTAX		      Counter
+	ACCESS		      read-only
+	STATUS		      mandatory
+	DESCRIPTION
+			"The number of NFS requests received for the
+			 TCP protocol for calls that resulted in this
+			 request being processed as a new request even
+			 when a corresponding entry existed in the Reply
+			 Cache, since the last boot."
+	::= { treplyCache 10 }
+
+	trcUdpInProgressHits OBJECT-TYPE
+	SYNTAX		  Counter
+	ACCESS		  read-only
+	STATUS		  mandatory
+	DESCRIPTION
+			"The number of NFS requests that were dropped
+			 for the UDP protocol, for calls already in
+			 progress, since the last boot."
+	::= { treplyCache 11 }
+
+	trcUdpDelayHits	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		deprecated
+	DESCRIPTION
+			"The number of NFS requests that were dropped
+			 for the UDP protocol, for replies already
+			 generated within a short interval, since the
+			 last boot. These stats are deprecated. A value 
+			 of zero will always be returned for these stats."
+	::= { treplyCache 12 }
+
+	trcUdpMisses	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION 
+			"The number of NFS requests received for the
+			 UDP protocol for which there were no corresponding
+			 entries already in the Reply Cache, since the
+			 last boot."
+	::= { treplyCache 13 }
+
+	trcUdpNonIdemDoneHits OBJECT-TYPE
+	SYNTAX		   Counter
+	ACCESS		   read-only
+	STATUS		   mandatory
+	DESCRIPTION
+			"The number of NFS requests received for the
+			 UDP protocol that resulted in replies being
+			 replayed from the Reply Cache, since the
+			 last boot."
+	::= { treplyCache 14 }
+
+	trcUdpNonIdemNotDoneHits OBJECT-TYPE
+	SYNTAX		      Counter
+	ACCESS		      read-only
+	STATUS		      mandatory
+	DESCRIPTION
+			"The number of NFS requests received for the
+			 UDP protocol for calls that resulted in this
+			 request being processed as a new request even
+			 when a corresponding entry existed in the Reply
+			 Cache, since the last boot."
+	::= { treplyCache 15 }
+
+	-- the tnfsrwStats group
+
+		-- this group contains statistics for the sizes of
+                -- NFS version 2 and 3 read and write calls since
+		-- last boot.
+
+	tv2ReadStats            OBJECT IDENTIFIER ::= { tnfsrwStats 1 }
+
+	tv2WriteStats           OBJECT IDENTIFIER ::= { tnfsrwStats 2 }
+
+	tv3ReadStats            OBJECT IDENTIFIER ::= { tnfsrwStats 3 }
+
+	tv3WriteStats           OBJECT IDENTIFIER ::= { tnfsrwStats 4 }
+
+
+	-- the tv2ReadStats group
+
+		-- this group contains statistics for the sizes of
+		-- NFS version 2 read calls since last boot.
+
+	tv2Read512Calls	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 read calls
+			received by the server since last boot
+			with request sizes between 0-511 bytes."
+	::= { tv2ReadStats 1 }
+
+	tv2Read1KCalls	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 read calls
+			received by the server since last boot
+			with request sizes between 512-1023 bytes."
+	::= { tv2ReadStats 2 }
+
+	tv2Read2KCalls	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 read calls
+			received by the server since last boot
+			with request sizes between 1K-2047 bytes."
+	::= { tv2ReadStats 3 }
+
+
+	tv2Read4KCalls	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 read calls
+			received by the server since last boot
+			with request sizes between 2K-4095 bytes."
+	::= { tv2ReadStats 4 }
+
+	tv2Read8KCalls	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 read calls
+			received by the server since last boot
+			with request sizes between 4K-8191 bytes."
+	::= { tv2ReadStats 5 }
+
+	tv2Read16KCalls	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 read calls
+			received by the server since last boot
+			with request sizes between 8K-16383 bytes."
+	::= { tv2ReadStats 6 }
+
+	tv2Read32KCalls	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 read calls
+			received by the server since last boot
+			with request sizes between 16K-32767 bytes."
+	::= { tv2ReadStats 7 }
+
+	tv2Read64KCalls	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 read calls
+			received by the server since last boot
+			with request sizes between 32K-65535 bytes."
+	::= { tv2ReadStats 8 }
+
+	tv2Read128KCalls	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 read calls
+			received by the server since last boot
+			with request sizes between 64K-131071 bytes."
+	::= { tv2ReadStats 9 }
+
+
+	-- the tv2WriteStats group
+
+		-- this group contains statistics for the sizes of
+		-- NFS version 2 write calls since last boot.
+
+	tv2Write512Calls	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 write calls
+			received by the server since last boot
+			with request sizes between 0-511 bytes."
+	::= { tv2WriteStats 1 }
+
+	tv2Write1KCalls	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 write calls
+			received by the server since last boot
+			with request sizes between 512-1023 bytes."
+	::= { tv2WriteStats 2 }
+
+	tv2Write2KCalls	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 write calls
+			received by the server since last boot
+			with request sizes between 1K-2047 bytes."
+	::= { tv2WriteStats 3 }
+
+
+	tv2Write4KCalls	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 write calls
+			received by the server since last boot
+			with request sizes between 2K-4095 bytes."
+	::= { tv2WriteStats 4 }
+
+	tv2Write8KCalls	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 write calls
+			received by the server since last boot
+			with request sizes between 4K-8191 bytes."
+	::= { tv2WriteStats 5 }
+
+	tv2Write16KCalls	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 write calls
+			received by the server since last boot
+			with request sizes between 8K-16383 bytes."
+	::= { tv2WriteStats 6 }
+
+	tv2Write32KCalls	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 write calls
+			received by the server since last boot
+			with request sizes between 16K-32767 bytes."
+	::= { tv2WriteStats 7 }
+
+	tv2Write64KCalls	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 write calls
+			received by the server since last boot
+			with request sizes between 32K-65535 bytes."
+	::= { tv2WriteStats 8 }
+
+	tv2Write128KCalls	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 2 write calls
+			received by the server since last boot
+			with request sizes between 64K-131071 bytes."
+	::= { tv2WriteStats 9 }
+
+
+	-- the tv3ReadStats group
+
+		-- this group contains statistics for the sizes of
+		-- NFS version 3 read calls since last boot.
+
+	tv3Read512Calls	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 read calls
+			received by the server since last boot
+			with request sizes between 0-511 bytes."
+	::= { tv3ReadStats 1 }
+
+	tv3Read1KCalls	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 read calls
+			received by the server since last boot
+			with request sizes between 512-1023 bytes."
+	::= { tv3ReadStats 2 }
+
+	tv3Read2KCalls	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 read calls
+			received by the server since last boot
+			with request sizes between 1K-2047 bytes."
+	::= { tv3ReadStats 3 }
+
+
+	tv3Read4KCalls	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 read calls
+			received by the server since last boot
+			with request sizes between 2K-4095 bytes."
+	::= { tv3ReadStats 4 }
+
+	tv3Read8KCalls	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 read calls
+			received by the server since last boot
+			with request sizes between 4K-8191 bytes."
+	::= { tv3ReadStats 5 }
+
+	tv3Read16KCalls 	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 read calls
+			received by the server since last boot
+			with request sizes between 8K-16383 bytes."
+	::= { tv3ReadStats 6 }
+
+	tv3Read32KCalls	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 read calls
+			received by the server since last boot
+			with request sizes between 16K-32767 bytes."
+	::= { tv3ReadStats 7 }
+
+	tv3Read64KCalls	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 read calls
+			received by the server since last boot
+			with request sizes between 32K-65535 bytes."
+	::= { tv3ReadStats 8 }
+
+	tv3Read128KCalls	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 read calls
+			received by the server since last boot
+			with request sizes between 64K-131071 bytes."
+	::= { tv3ReadStats 9 }
+
+
+	-- the tv3WriteStats group
+
+		-- this group contains statistics for the sizes of
+		-- NFS version 3 write calls since last boot.
+
+	tv3Write512Calls	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 write calls
+			received by the server since last boot
+			with request sizes between 0-511 bytes."
+	::= { tv3WriteStats 1 }
+
+	tv3Write1KCalls	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 write calls
+			received by the server since last boot
+			with request sizes between 512-1023 bytes."
+	::= { tv3WriteStats 2 }
+
+	tv3Write2KCalls	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 write calls
+			received by the server since last boot
+			with request sizes between 1K-2047 bytes."
+	::= { tv3WriteStats 3 }
+
+	tv3Write4KCalls	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 write calls
+			received by the server since last boot
+			with request sizes between 2K-4095 bytes."
+	::= { tv3WriteStats 4 }
+
+	tv3Write8KCalls	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 write calls
+			received by the server since last boot
+			with request sizes between 4K-8191 bytes."
+	::= { tv3WriteStats 5 }
+
+	tv3Write16KCalls	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 write calls
+			received by the server since last boot
+			with request sizes between 8K-16383 bytes."
+	::= { tv3WriteStats 6 }
+
+	tv3Write32KCalls	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 write calls
+			received by the server since last boot
+			with request sizes between 16K-32767 bytes."
+	::= { tv3WriteStats 7 }
+
+	tv3Write64KCalls	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 write calls
+			received by the server since last boot
+			with request sizes between 32K-65535 bytes."
+	::= { tv3WriteStats 8 }
+
+	tv3Write128KCalls	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of NFS Version 3 write calls
+			received by the server since last boot
+			with request sizes between 64K-131071 bytes."
+	::= { tv3WriteStats 9 }
+
+
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+	-- the nfsOptions group
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+
+	nfsIsLicensed	OBJECT-TYPE
+	SYNTAX		INTEGER {
+					false(1),
+					true(2)
+				}
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"Whether the nfs protocol is licensed on the
+			 filer."
+	::= { nfsOptions 1 }
+		
+
+	-- -- -- -- -- --  --
+	-- the quota group --
+	-- -- -- -- -- --  --
+
+	quotaState	OBJECT-TYPE
+	SYNTAX		INTEGER {
+		quotaStateOff(1),
+		quotaStateOn(2),
+		quotaStateInit(3)
+	}
+	ACCESS		read-only
+	STATUS		deprecated
+	DESCRIPTION
+			"Indicates whether the root volume's quotas are ON, 
+			 OFF or initializing.  This object is deprecated -
+			 use qvStateTable.qvStateStat instead."
+	::= { quota 1 }
+
+	quotaInitPercent OBJECT-TYPE
+	SYNTAX		 INTEGER (0..100)
+	ACCESS		 read-only
+	STATUS		 deprecated
+	DESCRIPTION
+			"Indicates percentage of root volume quota 
+			 computation done while quotas are in initializing 
+			 state. This object is deprecated - use 
+			 qvStateTable.qvInitPercent instead."
+	::= { quota 2 }
+
+
+	-- the old volume-unaware quota report table.  DEPRECATED
+
+	qrTable		OBJECT-TYPE
+	SYNTAX		SEQUENCE OF QrEntry
+	ACCESS		not-accessible
+	STATUS		deprecated
+	DESCRIPTION
+			"Provide a report of the current file and
+			 space consumption for each user or group with
+			 a quota in /etc/quotas.  All quotas are displayed
+			 regardless of volume, and no volume information
+			 is given.  This table is deprecated - use qrVTable 
+			 instead."
+	::= { quota 3 }
+
+	qrEntry		OBJECT-TYPE
+	SYNTAX		QrEntry
+	ACCESS		not-accessible
+	STATUS		deprecated
+	DESCRIPTION
+			"Provide a report of the current file and
+			 space consumption for a referenced entry
+			 with a quota in the file /etc/quotas.
+			 All quotas are displayed regardless of volume, 
+			 and no volume information is given.  This object is 
+			 deprecated - use qrVEntry instead."
+
+	INDEX	{ qrIndex }
+	::= { qrTable 1 }
+
+	QrEntry ::=
+	    SEQUENCE {
+		qrIndex
+		    INTEGER,
+		qrType
+		    INTEGER,
+		qrId
+		    INTEGER,
+		qrKBytesUsed
+		    INTEGER,
+		qrKBytesLimit
+		    INTEGER,
+		qrFilesUsed
+		    INTEGER,
+		qrFileLimit
+		    INTEGER,
+		qrPathName
+		    DisplayString
+	    }
+
+	qrIndex		OBJECT-TYPE
+	SYNTAX		INTEGER (1..2147483647)
+	ACCESS		read-only
+	STATUS		deprecated
+	DESCRIPTION
+			"A number that identifies this entry in the
+			 file /etc/quotas."
+	::= { qrEntry 1 }
+
+	qrType		OBJECT-TYPE
+	SYNTAX		INTEGER {
+		qrTypeUser(1),
+		qrTypeGroup(2),
+		qrTypeTree(3),
+		qrTypeUnknown(4)
+	}
+	ACCESS		read-only
+	STATUS		deprecated
+	DESCRIPTION
+			"Identifies the kind of quota for this qrEntry."
+	::= { qrEntry 2 }
+
+	qrId		OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		deprecated
+	DESCRIPTION
+			"The UID (user's numerical ID) or the GID (numerical
+			 ID of  the  group  that a user belongs to), as
+			 applicable, associated with this qrEntry."
+	::= { qrEntry 3 }
+
+	qrKBytesUsed	OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		deprecated
+	DESCRIPTION
+			"The current number of KBytes used for this
+			 qrEntry."
+	::= { qrEntry 4 }
+
+	qrKBytesLimit	OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		deprecated
+	DESCRIPTION
+			"The limit of KBytes that can be used for this
+			 qrEntry."
+	::= { qrEntry 5 }
+
+	qrFilesUsed	OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		deprecated
+	DESCRIPTION
+			"The current number of files used for this
+			 qrEntry."
+	::= { qrEntry 6 }
+
+	qrFileLimit	OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		deprecated
+	DESCRIPTION
+			"The limit of files that can be used for this
+			 qrEntry."
+	::= { qrEntry 7 }
+
+	qrPathName	OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS		deprecated
+	DESCRIPTION
+			"A textual string that contains the path
+			 corresponding to this qrEntry."
+	::= { qrEntry 8 }
+
+	-- quota volume state table	
+
+	qvStateTable	OBJECT-TYPE
+	SYNTAX		SEQUENCE OF QvStateEntry
+	ACCESS		not-accessible
+	STATUS		mandatory
+	DESCRIPTION
+			"Provide a report of the current quota state of
+			each volume in the system."
+	::= { quota 4 }
+
+	qvStateEntry		OBJECT-TYPE
+	SYNTAX		QvStateEntry
+	ACCESS		not-accessible
+	STATUS		mandatory
+	DESCRIPTION
+			"Provide a report of the current quota state of
+			each volume in the system."
+	INDEX	{ qvStateVolume }
+	::= { qvStateTable 1 }
+
+	QvStateEntry ::=
+	    SEQUENCE {
+		qvStateVolume
+		    INTEGER,
+		qvStateName
+		    DisplayString,
+		qvStateStat
+		    INTEGER,
+		qvStateInitPercent
+		    INTEGER
+	    }
+
+	qvStateVolume	OBJECT-TYPE
+	SYNTAX		INTEGER (1..2147483647)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"A number that identifies this volume.  The mapping
+       			 of this number to actual volumes may change if 
+			 volumes are added or deleted.  Use qvStateName to 
+			 unambiguously identify a volume.  The mapping
+			 established by this object is the same as 
+			 the mapping of qrVVolume (below) to actual volumes.
+			 For instance, if a qvStateVolume value of '5'
+			 represents the volume 'vol2', a value of '5'
+			 in qrVVolume also represents the volume 'vol2'."
+	::= { qvStateEntry 1 }
+
+	qvStateName	 OBJECT-TYPE
+	SYNTAX		 DisplayString
+	ACCESS		 read-only
+	STATUS		 mandatory
+	DESCRIPTION
+			"Indicates the name of this volume."
+	::= { qvStateEntry 2 }
+
+	qvStateStat	OBJECT-TYPE
+	SYNTAX		INTEGER {
+		quotaStateOff(1),
+		quotaStateOn(2),
+		quotaStateInit(3)
+	}
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"Indicates whether quotas are ON, OFF or
+			 initializing."
+	::= { qvStateEntry 3 }
+
+	qvStateInitPercent OBJECT-TYPE
+	SYNTAX		 INTEGER (0..100)
+	ACCESS		 read-only
+	STATUS		 mandatory
+	DESCRIPTION
+			"Indicates percentage of quota computation done
+			 while quotas are in initializing state."
+	::= { qvStateEntry 4 }
+
+
+	-- multi-volume-aware quota table
+	-- THIS IS DEPRECATED, please use qrV2Table instead
+
+	qrVTable	OBJECT-TYPE
+	SYNTAX		SEQUENCE OF QrVEntry
+	ACCESS		not-accessible
+	STATUS		deprecated
+	DESCRIPTION
+			"Provide a report of the current file and
+			 space consumption for each user or group with
+			 a quota in /etc/quotas."
+	::= { quota 5 }
+
+
+	qrVEntry	OBJECT-TYPE
+	SYNTAX		QrVEntry
+	ACCESS		not-accessible
+	STATUS		deprecated
+	DESCRIPTION
+			"Provide a report of the current file and
+			 space consumption for a referenced entry
+			 with a quota in the file /etc/quotas.  Indices
+			 select the volume of the quota and the quota entry
+			 itself."
+	INDEX	{ qrVVolume, qrVIndex }
+	::= { qrVTable 1 }
+
+	QrVEntry ::=
+	    SEQUENCE {
+		qrVIndex
+		    INTEGER,
+		qrVType
+		    INTEGER,
+		qrVId
+		    INTEGER,
+		qrVKBytesUsed
+		    INTEGER,
+		qrVKBytesLimit
+		    INTEGER,
+		qrVFilesUsed
+		    INTEGER,
+		qrVFileLimit
+		    INTEGER,
+		qrVPathName
+		    DisplayString,
+		qrVVolume
+		    INTEGER,
+		qrVTree
+		    DisplayString,
+		qrVIdType
+		    INTEGER,
+                qrVSid
+                    DisplayString,
+	        qrVKBytesThreshold
+                    INTEGER,
+		qrVKBytesLimitSoft
+		    INTEGER,
+		qrVFileLimitSoft
+		    INTEGER
+	    }
+
+	qrVIndex	OBJECT-TYPE
+	SYNTAX		INTEGER (1..2147483647)
+	ACCESS		read-only
+	STATUS		deprecated
+	DESCRIPTION
+			"A number that identifies this entry in the
+			 file /etc/quotas in the given volume."
+	::= { qrVEntry 1 }
+
+	qrVType		OBJECT-TYPE
+	SYNTAX		INTEGER {
+		qrVTypeUser(1),
+		qrVTypeGroup(2),
+		qrVTypeTree(3),
+		qrVTypeUserDefault(4),
+		qrVTypeGroupDefault(5),
+		qrVTypeUnknown(6)
+	}
+	ACCESS		read-only
+	STATUS		deprecated
+	DESCRIPTION
+			"Identifies the kind of quota for this qrVEntry."
+	::= { qrVEntry 2 }
+
+	qrVId		OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		deprecated
+	DESCRIPTION
+			"The UID (user's numerical ID) or the GID (numerical
+			 ID of  the  group  that a user belongs to), as
+			 applicable, associated with this qrVEntry. Check
+                         the qrVIdType field to see if this field is valid."
+	::= { qrVEntry 3 }
+
+	qrVKBytesUsed	OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		deprecated
+	DESCRIPTION
+			"The current number of KBytes used for this
+			 qrVEntry."
+	::= { qrVEntry 4 }
+
+	qrVKBytesLimit	OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		deprecated
+	DESCRIPTION
+			"The limit of KBytes that can be used for this
+			 qrVEntry."
+	::= { qrVEntry 5 }
+
+	qrVFilesUsed	OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		deprecated
+	DESCRIPTION
+			"The current number of files used for this
+			 qrVEntry."
+	::= { qrVEntry 6 }
+
+	qrVFileLimit	OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		deprecated
+	DESCRIPTION
+			"The limit of files that can be used for this
+			 qrVEntry."
+	::= { qrVEntry 7 }
+
+	qrVPathName	OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS		deprecated
+	DESCRIPTION
+			"A textual string that contains the path
+			 corresponding to this qrVEntry."
+	::= { qrVEntry 8 }
+
+	qrVVolume	OBJECT-TYPE
+	SYNTAX		INTEGER (1..2147483647)
+	ACCESS		read-only
+	STATUS		deprecated
+	DESCRIPTION
+			"A number that identifies the volume for which
+			this quota is in effect on.  The volume that this
+			value represents can be determined by checking
+			the value of qvStateName (above) with 
+			qvStateVolume set to the value found here."
+	::= { qrVEntry 9 }
+
+        qrVTree		OBJECT-TYPE
+        SYNTAX          DisplayString
+        ACCESS          read-only
+        STATUS          deprecated
+        DESCRIPTION
+			"A string that indicates which qtree this quota
+			belongs to."        
+	::= { qrVEntry 10 }
+
+        qrVIdType       OBJECT-TYPE
+        SYNTAX          INTEGER {
+             qrVIdValid(1),
+             qrVSidValid(2)
+        }
+        ACCESS          read-only
+        STATUS          deprecated
+        DESCRIPTION
+                        "A value that indicates which ID field is valid."
+        ::= { qrVEntry 11}
+
+	qrVSid		OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS		deprecated
+	DESCRIPTION
+			"The one or more IDs associated with this qrVEntry.
+                         If the qrVentry is associated with a Windows ID, the
+			 text form of the Windows ID (the SID) is here. If
+			 the qrVEntry is associated with more than one id,
+			 this contains a blank separated list of those IDs.
+                         Check the qrVIdType field to see if this field is
+                         valid."
+	::= { qrVEntry 12 }
+
+        qrVKBytesThreshold   OBJECT-TYPE
+        SYNTAX          INTEGER
+	ACCESS          read-only
+        STATUS          deprecated
+        DESCRIPTION
+                        "A number of KBytes that when used by this entry
+			 produces a warning message."
+        ::= { qrVEntry 13 }
+
+        qrVKBytesLimitSoft   OBJECT-TYPE
+        SYNTAX          INTEGER
+	ACCESS          read-only
+        STATUS          deprecated
+        DESCRIPTION
+			"The limit of KBytes that can be used for this
+			 qrVEntry before a warning message and SNMP
+			 trap is produced."
+        ::= { qrVEntry 14 }
+
+        qrVFileLimitSoft   OBJECT-TYPE
+        SYNTAX          INTEGER
+	ACCESS          read-only
+        STATUS          deprecated
+        DESCRIPTION
+			"The limit of files that can be used for this
+			 qrVEntry before a warning message and SNMP
+			 trap is produced."
+        ::= { qrVEntry 15 }
+
+	--
+	-- multi-volume-aware quota table with 64 bit values
+	--
+
+	qrV2Table	OBJECT-TYPE
+	SYNTAX		SEQUENCE OF QrV2Entry
+	ACCESS		not-accessible
+	STATUS		mandatory
+	DESCRIPTION
+			"Provide a report of the current file and
+			 space consumption for each user or group with
+			 a quota in /etc/quotas."
+	::= { quota 6 }
+
+
+	qrV2Entry	OBJECT-TYPE
+	SYNTAX		QrV2Entry
+	ACCESS		not-accessible
+	STATUS		mandatory
+	DESCRIPTION
+			"Provide a report of the current file and
+			 space consumption for a referenced entry
+			 with a quota in the file /etc/quotas.  Indices
+			 select the volume of the quota and the quota entry
+			 itself."
+	INDEX	{ qrV2Volume, qrV2Index }
+	::= { qrV2Table 1 }
+
+	QrV2Entry ::=
+	    SEQUENCE {
+		qrV2Index
+		    INTEGER,
+		qrV2Type
+		    INTEGER,
+		qrV2Id
+		    INTEGER,
+		qrV2HighKBytesUsed
+		    INTEGER,
+		qrV2LowKBytesUsed
+		    INTEGER,
+                qrV2QuotaUnlimited
+		    INTEGER,
+		qrV2HighKBytesLimit
+		    INTEGER,
+		qrV2LowKBytesLimit
+		    INTEGER,
+		qrV2FilesUsed
+		    INTEGER,
+                qrV2FileQuotaUnlimited
+		    INTEGER,
+		qrV2FileLimit
+		    INTEGER,
+		qrV2PathName
+		    DisplayString,
+		qrV2Volume
+		    INTEGER,
+		qrV2Tree
+		    DisplayString,
+		qrV2IdType
+		    INTEGER,
+                qrV2Sid
+                    DisplayString,
+                qrV2ThresholdUnlimited
+		    INTEGER,		    
+	        qrV2HighKBytesThreshold
+                    INTEGER,
+	        qrV2LowKBytesThreshold
+                    INTEGER,
+                qrV2SoftQuotaUnlimited
+		    INTEGER,
+		qrV2HighKBytesSoftLimit
+		    INTEGER,
+		qrV2LowKBytesSoftLimit
+		    INTEGER,
+		qrV2SoftFileQuotaUnlimited
+		    INTEGER,
+		qrV2SoftFileLimit
+		    INTEGER
+	    }
+
+	qrV2Index	OBJECT-TYPE
+	SYNTAX		INTEGER (1..2147483647)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"A number that identifies this entry in the
+			 file /etc/quotas in the given volume."
+	::= { qrV2Entry 1 }
+
+	qrV2Type		OBJECT-TYPE
+	SYNTAX		INTEGER {
+		qrV2TypeUser(1),
+		qrV2TypeGroup(2),
+		qrV2TypeTree(3),
+		qrV2TypeUserDefault(4),
+		qrV2TypeGroupDefault(5),
+		qrV2TypeUnknown(6)
+	}
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"Identifies the kind of quota for this qrV2Entry."
+	::= { qrV2Entry 2 }
+
+	qrV2Id		OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The UID (user's numerical ID) or the GID (numerical
+			 ID of  the  group  that a user belongs to), as
+			 applicable, associated with this qrV2Entry. Check
+                         the qrV2IdType field to see if this field is valid."
+	::= { qrV2Entry 3 }
+
+	qrV2HighKBytesUsed	OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The current number of KBytes used for this
+			 qrV2Entry. This object returns the most significant
+			 32 bits of the 64 bit unsigned integer."
+	::= { qrV2Entry 4 }
+
+	qrV2LowKBytesUsed	OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The current number of KBytes used for this
+			 qrV2Entry. This object returns the least significant
+			 32 bits of the 64 bit unsigned integer."
+	::= { qrV2Entry 5 }
+
+	qrV2QuotaUnlimited      OBJECT-TYPE
+	SYNTAX			INTEGER {
+					false(1),
+					true(2)
+				}
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"This flag designates whether or not the
+			size based quota limit for this qrV2Entry is unlimited.
+			If false(1) then qrV2HighKBytesLimit and
+			qrV2LowKBytesLimit are valid, if true(0) both
+			qrV2HighKBytesLimit and qrV2LowKBytesLimit are unused
+			and will return 0."
+	::= { qrV2Entry 6 }
+
+	qrV2HighKBytesLimit	OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The limit of KBytes that can be used for this
+			 qrV2Entry. This object returns the most significant
+			 32 bits of the 64 bit unsigned integer. This will 
+			 return 0 if qrV2QuotaUnlimited is true."
+	::= { qrV2Entry 7 }
+
+	qrV2LowKBytesLimit	OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The limit of KBytes that can be used for this
+			 qrV2Entry. This object returns the least significant
+			 32 bits of the 64 bit unsigned integer. This will 
+			 return 0 if qrV2QuotaUnlimited is true."
+	::= { qrV2Entry 8 }
+
+	qrV2FilesUsed	OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The current number of files used for this
+			 qrV2Entry."
+	::= { qrV2Entry 9 }
+
+	qrV2FileQuotaUnlimited	 OBJECT-TYPE
+	SYNTAX			 INTEGER {
+					 false(1),
+					 true(2)	
+				 }	 
+	ACCESS			 read-only
+	STATUS			 mandatory
+	DESCRIPTION
+			"This flag designates whether or not the
+			file based quota limit for this qrV2Entry is unlimited.
+			If false(1) then qrV2FileLimit is valid, if true(0)
+			qrV2FileLimit will return 0."
+	::= { qrV2Entry 10 }
+	
+
+	qrV2FileLimit	OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The limit of files that can be used for this
+			 qrV2Entry."
+	::= { qrV2Entry 11 }
+
+	qrV2PathName	OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"A textual string that contains the path
+			 corresponding to this qrV2Entry."
+	::= { qrV2Entry 12 }
+
+	qrV2Volume	OBJECT-TYPE
+	SYNTAX		INTEGER (1..2147483647)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"A number that identifies the volume for which
+			this quota is in effect on.  The volume that this
+			value represents can be determined by checking
+			the value of qvStateName (above) with 
+			qvStateVolume set to the value found here."
+	::= { qrV2Entry 13 }
+
+        qrV2Tree		OBJECT-TYPE
+        SYNTAX          DisplayString
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+			"A string that indicates which qtree this quota
+			belongs to."        
+	::= { qrV2Entry 14 }
+
+        qrV2IdType       OBJECT-TYPE
+        SYNTAX          INTEGER {
+				qrV2IdValid(1),
+				qrV2SidValid(2)
+			}
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                        "A value that indicates which ID field is valid."
+        ::= { qrV2Entry 15 }
+
+	qrV2Sid		OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The one or more IDs associated with this qrV2Entry.
+                         If the qrV2entry is associated with a Windows ID, the
+			 text form of the Windows ID (the SID) is here. If
+			 the qrV2Entry is associated with more than one id,
+			 this contains a blank separated list of those IDs.
+                         Check the qrV2IdType field to see if this field is
+                         valid."
+	::= { qrV2Entry 16 }
+
+	qrV2ThresholdUnlimited	 OBJECT-TYPE
+	SYNTAX			 INTEGER {
+					 false(1),
+					 true(2)
+				 }
+	ACCESS			 read-only
+	STATUS			 mandatory
+	DESCRIPTION
+			"This flag designates whether or not the
+			size based threshold limit for this qrV2Entry is 
+			unlimited. If false(1) then qrV2HighKBytesThreshold and
+			qrV2LowKBytesThreshold are valid, if true(0) both
+			qrV2HighKBytesThreshold and qrV2LowKBytesThreshold 
+			are unused and will return 0."
+	::= { qrV2Entry 17 }
+
+        qrV2HighKBytesThreshold	 OBJECT-TYPE
+        SYNTAX			 INTEGER
+	ACCESS			 read-only
+        STATUS			 mandatory
+        DESCRIPTION
+                        "A number of KBytes that when used by this entry
+			 produces a warning message. This object returns the 
+			 most significant 32 bits of the 64 bit unsigned 
+			 integer. This will return 0 if qrV2ThresholdUnlimited
+			 is true."
+        ::= { qrV2Entry 18 }
+
+        qrV2LowKBytesThreshold	 OBJECT-TYPE
+        SYNTAX			 INTEGER
+	ACCESS			 read-only
+        STATUS			 mandatory
+        DESCRIPTION
+                        "A number of KBytes that when used by this entry
+			 produces a warning message. This object returns the 
+			 least significant 32 bits of the 64 bit unsigned 
+			 integer. This will return 0 if qrV2ThresholdUnlimited
+			 is true."
+        ::= { qrV2Entry 19 }
+
+	qrV2SoftQuotaUnlimited	 OBJECT-TYPE
+	SYNTAX			 INTEGER {
+					 false(1),
+					 true(2)
+				 }
+	ACCESS			 read-only
+	STATUS			 mandatory
+	DESCRIPTION
+			"This flag designates whether or not the
+			size based soft quota limit for this qrV2Entry is 
+			unlimited. If false(1) then qrV2HighKBytesSoftLimit and
+			qrV2LowKBytesSoftLimit are valid, if true(0) both
+			qrV2HighKBytesSoftLimit and qrV2LowKBytesSoftLimit 
+			are unused and will return 0."
+	::= { qrV2Entry 20 }
+
+        qrV2HighKBytesSoftLimit	 OBJECT-TYPE
+        SYNTAX			 INTEGER
+	ACCESS			 read-only
+        STATUS			 mandatory
+        DESCRIPTION
+			"The limit of KBytes that can be used for this
+			 qrV2Entry before a warning message and SNMP
+			 trap is produced. This object returns the most
+			 significant 32 bits of the 64 bit unsigned integer."
+        ::= { qrV2Entry 21 }
+        qrV2LowKBytesSoftLimit	 OBJECT-TYPE
+        SYNTAX			 INTEGER
+	ACCESS			 read-only
+        STATUS			 mandatory
+        DESCRIPTION
+			"The limit of KBytes that can be used for this
+			 qrV2Entry before a warning message and SNMP
+			 trap is produced. This object returns the least
+			 significant 32 bits of the 64 bit unsigned integer."
+        ::= { qrV2Entry 22 }
+
+	qrV2SoftFileQuotaUnlimited  OBJECT-TYPE
+	SYNTAX			    INTEGER {
+					     false(1),
+					     true(2)
+				    }
+	ACCESS			    read-only
+	STATUS			    mandatory
+	DESCRIPTION
+			"This flag designates whether or not the
+			file based soft quota limit for this qrV2Entry is 
+			unlimited. If false(1) then qrV2SoftFileLimit is valid,
+			if true(0) qrV2SoftFileLimit is unused and will 
+			return 0."
+	::= { qrV2Entry 23 }
+
+        qrV2SoftFileLimit OBJECT-TYPE
+        SYNTAX		  INTEGER
+	ACCESS		  read-only
+        STATUS		  mandatory
+        DESCRIPTION
+			"The limit of files that can be used for this
+			 qrV2Entry before a warning message and SNMP
+			 trap is produced. This will return 0 if 
+			 qrV2SoftFileQuotaUnlimited is true."
+        ::= { qrV2Entry 24 }
+
+
+	-- -- -- -- -- -- -- --  --
+	-- the file system group --
+	-- -- -- -- -- -- -- --  --
+
+	filesysMaxfilesAvail	OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			deprecated
+	DESCRIPTION
+				"The count of the maximum number of
+				 files allowable on the root volume.  This
+				 object is deprecated - use 
+				 dfEntry.dfMaxFilesAvail instead."
+	::= { filesys 1 }
+
+	filesysMaxfilesUsed	OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			deprecated
+	DESCRIPTION
+				"The count of the number of files
+				 currently in use on the root volume.  
+				 This object is deprecated - use
+				 dfEntry.dfMaxFilesUsed instead."
+	::= { filesys 2 }
+
+	filesysMaxfilesPossible	OBJECT-TYPE
+	SYNTAX                  INTEGER
+	ACCESS			read-only
+	STATUS			deprecated
+	DESCRIPTION
+				"The largest value to which the
+				 filesysMaxfilesAvail parameter above can
+				 be increased by reconfiguration on the
+				 root volume.  This object is deprecated -
+				 use dfEntry.dfMaxFilesPossible."
+	::= { filesys 3 }
+
+	dfTable			OBJECT-TYPE
+	SYNTAX			SEQUENCE OF DfEntry
+	ACCESS			not-accessible
+	STATUS			mandatory
+	DESCRIPTION
+				"Provide a report of the available disk space
+				 on the file systems. The tables shows the
+				 available disk space for volumes as well as
+				 aggregates."
+	::= { filesys 4 }
+
+	snapshot OBJECT IDENTIFIER ::= { filesys 5 }
+
+	-- the display file system table
+
+	dfEntry		OBJECT-TYPE
+	SYNTAX		DfEntry
+	ACCESS		not-accessible
+	STATUS		mandatory
+	DESCRIPTION
+			"Provide a report of the available disk space on
+			 the referenced file system."
+	INDEX      { dfIndex }
+	::= { dfTable 1 }
+
+	DfEntry ::=
+	    SEQUENCE {
+		dfIndex
+		    INTEGER,
+		dfFileSys
+		    DisplayString,
+		dfKBytesTotal
+		    INTEGER,
+		dfKBytesUsed
+		    INTEGER,
+		dfKBytesAvail
+		    INTEGER,
+		dfPerCentKBytesCapacity
+		    INTEGER,
+		dfInodesUsed
+		    INTEGER,
+		dfInodesFree
+		    INTEGER,
+		dfPerCentInodeCapacity
+		    INTEGER,
+		dfMountedOn
+		    DisplayString,
+		dfMaxFilesAvail
+		    INTEGER,
+		dfMaxFilesUsed
+		    INTEGER,
+		dfMaxFilesPossible
+		    INTEGER,
+		dfHighTotalKBytes
+		    INTEGER,
+		dfLowTotalKBytes
+		    INTEGER,
+		dfHighUsedKBytes
+		    INTEGER,
+		dfLowUsedKBytes
+		    INTEGER,
+		dfHighAvailKBytes
+		    INTEGER,
+		dfLowAvailKBytes
+		    INTEGER,
+		dfStatus 
+		    INTEGER,
+		dfMirrorStatus 
+		    INTEGER,
+		dfPlexCount
+		    INTEGER,
+		dfType
+		    INTEGER
+	    }
+
+	dfIndex		OBJECT-TYPE
+	SYNTAX		INTEGER (1..2147483647)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"A number that identifies this entry for the
+			 referenced file system."
+	::= { dfEntry 1 }
+
+	dfFileSys	OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The name for the referenced file system."
+	::= { dfEntry 2 }
+
+	-- dfKBytesTotal is DEPRECATED;
+	-- use dfHighTotalKBytes and dfLowTotalKBytes
+
+	dfKBytesTotal	OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The total capacity in KBytes for the
+			 referenced file system."
+	::= { dfEntry 3 }
+
+	-- dfKBytesUsed is DEPRECATED;
+	-- use dfHighUsedKBytes and dfLowUsedKBytes
+
+	dfKBytesUsed	OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The total disk space in KBytes that is in use
+			 on the referenced file system."
+	::= { dfEntry 4 }
+
+	-- dfKBytesAvail is DEPRECATED;
+	-- use dfHighAvailKBytes and dfLowAvailKBytes
+
+	dfKBytesAvail	OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The total disk space in KBytes that is
+			 free for use on the referenced file system."
+	::= { dfEntry 5 }
+
+	dfPerCentKBytesCapacity	OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The percentage of disk space currently
+				 in use on the referenced file system."
+	::= { dfEntry 6 }
+
+	dfInodesUsed		OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The total number of inodes in use on the
+				 referenced file system."
+	::= { dfEntry 7 }
+
+	dfInodesFree		OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The total number of inodes that are
+				 available for use on the referenced
+				 file system."
+	::= { dfEntry 8 }
+
+	dfPerCentInodeCapacity	OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The percentage of disk space currently
+				 in use based on inode counts, on the
+				 referenced file system."
+	::= { dfEntry 9 }
+
+	dfMountedOn		OBJECT-TYPE
+	SYNTAX			DisplayString
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The name of the file on which this file
+				 system is mounted."
+	::= { dfEntry 10 }
+
+	dfMaxFilesAvail		OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The count of the maximum number of
+				 files allowable on the referenced file
+				 system."
+	::= { dfEntry 11 }
+
+	dfMaxFilesUsed		OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The count of the number of files
+				 currently in use on the referenced file
+				 system."
+	::= { dfEntry 12 }
+
+	dfMaxFilesPossible	OBJECT-TYPE
+	SYNTAX                  INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The largest value to which the
+				 filesysMaxfilesAvail parameter above can
+				 be increased by reconfiguration on the
+				 referenced file system."
+	::= { dfEntry 13 }
+
+	dfHighTotalKBytes	OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The total capacity in KBytes for the
+				 referenced file system.  This object returns
+				 the most significant 32 bits of the 64 bit 
+				 unsigned integer."
+	::= { dfEntry 14 }
+
+	dfLowTotalKBytes	OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The total capacity in KBytes for the
+				 referenced file system.  This object returns
+				 the least significant 32 bits of the 64 bit 
+				 unsigned integer."
+	::= { dfEntry 15 }
+
+	dfHighUsedKBytes	OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The total disk space in KBytes that is in use
+				 on the referenced file system.  This object
+				 returns the most significant 32 bits of the
+				 64 bit unsigned integer."
+	::= { dfEntry 16 }
+
+	dfLowUsedKBytes		OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The total disk space in KBytes that is in use
+				 on the referenced file system.  This object
+				 returns the least significant 32 bits of the
+				 64 bit unsigned integer."
+	::= { dfEntry 17 }
+
+	dfHighAvailKBytes	OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The total disk space in KBytes that is free
+				 for use on the referenced file system.
+				 This object returns the most significant
+				 32 bits of the 64 bit unsigned integer."
+	::= { dfEntry 18 }
+
+	dfLowAvailKBytes	OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The total disk space in KBytes that is free
+				 for use on the referenced file system.
+				 This object returns the least significant
+				 32 bits of the 64 bit unsigned integer."
+	::= { dfEntry 19 }
+
+
+        dfStatus                OBJECT-TYPE
+        SYNTAX                  INTEGER { 
+		unmounted(1),
+		mounted(2),
+		frozen(3),
+		destroying(4),
+		creating(5),
+		mounting(6),
+		unmounting(7),
+		nofsinfo(8),
+		replaying(9),
+		replayed(10)
+	} 
+        ACCESS                  read-only
+        STATUS                  mandatory
+        DESCRIPTION
+                                "The status of the file system."
+        ::= { dfEntry 20 }
+
+        dfMirrorStatus          OBJECT-TYPE
+        SYNTAX                  INTEGER {
+		invalid(1),
+		uninitialized(2),
+		needcpcheck(3),
+		cpcheckwait(4),
+		unmirrored(5),
+		normal(6),
+		degraded(7),
+		resyncing(8),
+		failed(9),
+		limbo(10)
+	} 
+        ACCESS                  read-only
+        STATUS                  mandatory
+        DESCRIPTION
+                                "Overall mirror status of the file system."
+        ::= { dfEntry 21 }
+
+        dfPlexCount             OBJECT-TYPE
+        SYNTAX                  INTEGER
+        ACCESS                  read-only
+        STATUS                  mandatory
+        DESCRIPTION
+                                "Number of plexes in this file system."
+        ::= { dfEntry 22 }
+
+        dfType                  OBJECT-TYPE
+        SYNTAX                  INTEGER {
+		    traditionalVolume(1),
+		    flexibleVolume(2),		
+		    aggregate(3)
+	}
+        ACCESS                  read-only
+        STATUS                  mandatory
+        DESCRIPTION
+                                "Indicates the type of container." 
+        ::= { dfEntry 23 }
+
+
+	-- the old single-volume snapshot table.  DEPRECATED
+
+	slTable		OBJECT-TYPE
+	SYNTAX		SEQUENCE OF SlEntry
+	ACCESS		not-accessible
+	STATUS		deprecated
+	DESCRIPTION
+			"Provide a report of the snapshots on the
+			 root volume.  This table is deprecated - use
+			 slVTable instead."
+	::= { snapshot 1 }
+
+	slEntry		OBJECT-TYPE
+	SYNTAX		SlEntry
+	ACCESS		not-accessible
+	STATUS		deprecated
+	DESCRIPTION
+			"Provide a report on a given snapshot on the
+			 root volume.  This object is deprecated - use
+			 slVEntry instead."
+	INDEX	{ slIndex }
+	::= { slTable 1 }
+
+	SlEntry ::=
+	    SEQUENCE {
+		slIndex
+		    INTEGER,
+		slMonth
+		    INTEGER,
+		slDay
+		    INTEGER (1..31),
+		slHour
+		    INTEGER (0..23),
+		slMinutes
+		    INTEGER (0..59),
+		slName
+		    DisplayString
+	    }
+
+	slIndex		OBJECT-TYPE
+	SYNTAX		INTEGER (1..2147483647)
+	ACCESS		read-only
+	STATUS		deprecated
+	DESCRIPTION
+			"A number that identifies this entry for the
+			 referenced file system."
+	::= { slEntry 1 }
+
+	slMonth		OBJECT-TYPE
+	SYNTAX		INTEGER {
+		january(1),
+		february(2),
+		march(3),
+		april(4),
+		may(5),
+		june(6),
+		july(7),
+		august(8),
+		september(9),
+		october(10),
+		november(11),
+		december(12)
+	}
+	ACCESS		read-only
+	STATUS		deprecated
+	DESCRIPTION
+			"The month in which the snapshot was created."
+	::= { slEntry 2 }
+
+	slDay		OBJECT-TYPE
+	SYNTAX		INTEGER (1..31)
+	ACCESS		read-only
+	STATUS		deprecated
+	DESCRIPTION
+			"The day on which the snapshot was created."
+	::= { slEntry 3 }
+
+	slHour		OBJECT-TYPE
+	SYNTAX		INTEGER (0..23)
+	ACCESS		read-only
+	STATUS		deprecated
+	DESCRIPTION
+			"The hour in which the snapshot was created."
+	::= { slEntry 4 }
+
+	slMinutes	OBJECT-TYPE
+	SYNTAX		INTEGER (0..59)
+	ACCESS		read-only
+	STATUS		deprecated
+	DESCRIPTION
+			"The minute in which the snapshot was created."
+	::= { slEntry 5 }
+
+	slName		OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS		deprecated
+	DESCRIPTION
+			"The name of the referenced snapshot."
+	::= { slEntry 6 }
+
+
+	-- The multivolume / aggregate snapshot table.
+
+	slVTable	OBJECT-TYPE
+	SYNTAX		SEQUENCE OF SlVEntry
+	ACCESS		not-accessible
+	STATUS		mandatory
+	DESCRIPTION
+			"Provide a report of the snapshots on the
+			 file systems."
+	::= { snapshot 2 }
+
+	slVEntry	OBJECT-TYPE
+	SYNTAX		SlVEntry
+	ACCESS		not-accessible
+	STATUS		mandatory
+	DESCRIPTION
+			"Provide a report on a given snapshot on the
+			 file system.  Indices select the volume of
+			 the snapshot and the snapshot entry itself."
+	INDEX	{ slVVolume, slVIndex }
+	::= { slVTable 1 }
+
+	SlVEntry ::=
+	    SEQUENCE {
+		slVIndex
+		    INTEGER,
+		slVMonth
+		    INTEGER,
+		slVDay
+		    INTEGER (1..31),
+		slVHour
+		    INTEGER (0..23),
+		slVMinutes
+		    INTEGER (0..59),
+		slVName
+		    DisplayString,
+		slVVolume
+		    INTEGER,
+		slVNumber
+		    INTEGER,
+		slVVolumeName
+		    DisplayString,
+		slVType
+		    INTEGER
+	    }
+
+	slVIndex	OBJECT-TYPE
+	SYNTAX		INTEGER (1..2147483647)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"A number that identifies this entry for the
+			 referenced file system."
+	::= { slVEntry 1 }
+
+	slVMonth		OBJECT-TYPE
+	SYNTAX		INTEGER {
+		january(1),
+		february(2),
+		march(3),
+		april(4),
+		may(5),
+		june(6),
+		july(7),
+		august(8),
+		september(9),
+		october(10),
+		november(11),
+		december(12)
+	}
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The month in which the snapshot was created."
+	::= { slVEntry 2 }
+
+	slVDay		OBJECT-TYPE
+	SYNTAX		INTEGER (1..31)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The day on which the snapshot was created."
+	::= { slVEntry 3 }
+
+	slVHour		OBJECT-TYPE
+	SYNTAX		INTEGER (0..23)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The hour in which the snapshot was created."
+	::= { slVEntry 4 }
+
+	slVMinutes	OBJECT-TYPE
+	SYNTAX		INTEGER (0..59)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The minute in which the snapshot was created."
+	::= { slVEntry 5 }
+
+	slVName		OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The name of the referenced snapshot."
+	::= { slVEntry 6 }
+
+	slVVolume	OBJECT-TYPE
+	SYNTAX		INTEGER (1..2147483647)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"A number that identifies the volume  / aggregate that 
+			 contains this snapshot."
+	::= { slVEntry 7 }
+
+	slVNumber	OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"Number of snapshots for this volume / aggregate."
+	::= { slVEntry 8 }
+
+	slVVolumeName	OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The name of the volume / aggregate. This does not 
+			 have a /vol/ prefix."
+
+	::= { slVEntry 9 }
+
+	slVType 	OBJECT-TYPE
+	SYNTAX		INTEGER {
+		  traditionalVolume(1),
+		  flexibleVolume(2),
+		  aggregate(3)	
+	}
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"Indicates the type of container for this
+			 snapshot."
+
+	::= { slVEntry 10 }
+
+
+	-- The snapshot content table.
+
+	slQTable	OBJECT-TYPE
+	SYNTAX		SEQUENCE OF SlQEntry
+	ACCESS		not-accessible
+	STATUS		mandatory
+	DESCRIPTION
+			"Provide a report of the snapshots and their contents
+			on the file systems."
+	::= { snapshot 3 }
+
+	slQEntry	OBJECT-TYPE
+	SYNTAX		SlQEntry
+	ACCESS		not-accessible
+	STATUS		mandatory
+	DESCRIPTION
+			"Provide a report on a given snapshot for a given 
+			qtree on the file system.  Indices select the volume 
+			and qtree of the snapshot and the snapshot entry 
+			itself."
+
+	INDEX	{ slQVolume, slQQtree, slQIndex }
+	::= { slQTable 1 }
+
+	SlQEntry ::=
+	    SEQUENCE {
+		slQIndex
+		    INTEGER,
+		slQVolume
+		    INTEGER,    
+		slQQtree
+		    INTEGER,
+		slQSnapshotName
+		    DisplayString,
+    	        slQSnapshotTime
+		    INTEGER,
+		slQQtreeName
+		    DisplayString,
+  	        slQQtreeContent
+		    INTEGER,
+		slQSource	
+		    OCTET STRING,
+		slQSourceTime
+		    INTEGER,
+		slQVolumeName
+		    DisplayString
+	    }
+
+	slQIndex	OBJECT-TYPE
+	SYNTAX		INTEGER (1..2147483647)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"A number that identifies this entry for the
+			 referenced file system."
+	::= { slQEntry 1 }
+
+	slQVolume	OBJECT-TYPE
+	SYNTAX		INTEGER (1..2147483647)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"A number that identifies the volume that contains
+			this snapshot."
+	::= { slQEntry 2 }
+
+	slQQtree	OBJECT-TYPE
+	SYNTAX		INTEGER (1..2147483647)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"A number that identifies the qtree that contains
+			this snapshot."
+	::= { slQEntry 3 }
+
+	slQSnapshotName	OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The name of the referenced snapshot."
+	::= { slQEntry 4 }
+
+	slQSnapshotTime	OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"Time of the snapshot on the system. The time in 
+			seconds since January 1, 1970."
+	::= { slQEntry 5 }
+
+	slQQtreeName	OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"A string that indicates which qtree is in this 
+			snapshot"
+	::= { slQEntry 6 }
+
+        slQQtreeContent	OBJECT-TYPE 
+	SYNTAX		INTEGER {
+				replica(1),
+				transitioning(2),
+				original(3)
+				}
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+	                "The content of the qtree tree"
+	::= { slQEntry 7 }
+
+	slQSource	OBJECT-TYPE 
+	SYNTAX		OCTET STRING
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+	    		"The source of this qtree for a replicated qtree.
+			'-' for a original qtree."
+	::= { slQEntry 8 }
+
+	slQSourceTime	OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"Time of the source snapshot for a replicated qtree.
+			Time of the current snapshot for an original qtree.
+			The time in seconds since January 1, 1970. 0 if the 
+			qtree is in a transitioning stage"
+
+	::= { slQEntry 9 }
+
+	slQVolumeName	OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The name of the volume. This does not have a /vol/
+			prefix."
+	::= { slQEntry 10 }
+
+
+	dfNumber		OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Number of entries in the dfTable table."
+
+	::= { filesys 6 }
+
+	-- -- -- -- -- -- -- -- -- -- -- --
+	-- file system status information --
+	-- -- -- -- -- -- -- -- -- -- -- --
+
+	fsStatus OBJECT IDENTIFIER ::= { filesys 7 }
+
+	fsOverallStatus	OBJECT-TYPE
+	SYNTAX		INTEGER {
+				ok(1),
+				nearlyFull(2),
+				full(3)
+				}
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"An indication of overall file system
+			health.  'ok' indicates that all file systems
+			have adequate space.  'nearlyFull' means
+			that one or more is nearly full (more than
+			95% full). 'full' means that one or more
+			are more than 98% full."
+	::= { fsStatus 1 }
+
+	fsStatusMessage	OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"A string indicating any file systems which
+			are full or nearly full."
+	::= { fsStatus 2 }
+
+	fsMaxUsedBytesPerCent	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The percentage of space currently in use
+			by the file system which is most full."
+	::= { fsStatus 3 }
+
+	fsMaxUsedInodesPerCent	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The percentage of inodes currently in use
+			by the file system which is most full."
+	::= { fsStatus 4 }
+	
+	fsMaxUsedReservedPerCent OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The percentage of reserved space currently 
+			in use by the file system which is most full."
+	::= { fsStatus 5 }
+
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+	-- 
+	--  All volumes, including those offline and those
+	--  owned by the cluster partner.
+	--
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+
+	volTable	OBJECT-TYPE
+	SYNTAX		SEQUENCE OF VolEntry
+	ACCESS		not-accessible
+	STATUS		mandatory
+	DESCRIPTION
+			"List the volumes defined on the system,
+			including offline volumes."
+
+	::= { filesys 8 }
+
+	volEntry	OBJECT-TYPE
+	SYNTAX		VolEntry
+	ACCESS		not-accessible
+	STATUS		mandatory
+	DESCRIPTION
+			"Provide details about a particular volume."
+	INDEX	{ volIndex }
+	::= { volTable 1 }
+
+	VolEntry ::=
+	    SEQUENCE {
+		volIndex	INTEGER,
+		volName		DisplayString,
+		volFSID		DisplayString,
+		volOwningHost	INTEGER,
+		volState	DisplayString,
+		volStatus	DisplayString,
+		volOptions	DisplayString,
+		volUUID		DisplayString,
+		volAggrName	DisplayString,
+		volType		INTEGER,
+		volClone	INTEGER,
+		volCloneOf	DisplayString,
+		volCloneSnap	DisplayString
+	    }
+
+	volIndex	OBJECT-TYPE
+	SYNTAX		INTEGER (1..2048)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"A number that identifies this volume.  The
+			volIndex is not related to any other table
+			defined in this MIB, and may change as
+			volumes are created and destroyed."
+	::= { volEntry 1 }
+
+	volName		OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"Name of the volume.  This includes no /vol/
+			prefix."
+	::= { volEntry 2 }
+
+	volFSID		OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"Unique identifier for this volume."
+	::= { volEntry 3 }
+
+	volOwningHost	OBJECT-TYPE
+	SYNTAX		INTEGER {
+				local(1),
+				partner(2)
+	}
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"Indication of which host owns this volume."
+	::= { volEntry 4 }
+
+	volState	OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"State of the volume, such as 'online' or
+			'offline'."
+	::= { volEntry 5 }
+
+	volStatus	OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"Status of the volume, such as 'normal' or
+			'reconstructing'. May include several values
+			separated by comma and space."
+	::= { volEntry 6 }
+
+	volOptions	OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"Options associated with the volume, such 
+			as 'root' and 'nosnapdir=off'. May include
+			several values separated by comma."
+	::= { volEntry 7 }
+
+	volUUID		OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"A unique id associated with the volume."  
+	::= { volEntry 8 }
+
+        volAggrName 	OBJECT-TYPE
+        SYNTAX          DisplayString
+        ACCESS          read-only
+        STATUS         	optional 
+        DESCRIPTION
+                        "Name of the aggregate this flexible volume is a
+                         part of."
+        ::= { volEntry 9 }
+
+        volType     	OBJECT-TYPE
+        SYNTAX          INTEGER {
+                                traditional(1),
+                                flexible(2)
+        }
+        ACCESS          read-only
+        STATUS         	optional 
+        DESCRIPTION
+                        "Type of this volume, older volumes are
+                         traditional while newer volumes contained in
+                         aggregates are flexible."
+        ::= { volEntry 10 }
+
+        volClone    	OBJECT-TYPE
+        SYNTAX          INTEGER {
+                                false(1),
+                                true(2)
+        }
+        ACCESS          read-only
+        STATUS          optional  
+        DESCRIPTION
+                        "True indicates flexible volume is a clone."
+        ::= { volEntry 11 }
+
+        volCloneOf  	OBJECT-TYPE
+        SYNTAX          DisplayString
+        ACCESS          read-only
+        STATUS         	optional 
+        DESCRIPTION
+                        "Name of flexible volume this flexible volume is
+                         a clone of."
+        ::= { volEntry 12 }
+
+        volCloneSnap 	OBJECT-TYPE
+        SYNTAX          DisplayString
+        ACCESS          read-only
+        STATUS         	optional 
+        DESCRIPTION
+                        "Name of original cloned snapshot."
+        ::= { volEntry 13 }
+
+	volNumber	OBJECT-TYPE
+	SYNTAX		INTEGER (0..2048)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"Number of volumes in the volTable."
+
+	::= { filesys 9 }
+
+
+        qtreeTable	OBJECT-TYPE
+	SYNTAX		SEQUENCE OF QtreeEntry
+	ACCESS		not-accessible
+	STATUS		mandatory
+	DESCRIPTION
+			"Provide a list of the qtrees on the system."
+
+	::= { filesys 10 }
+
+	qtreeEntry	OBJECT-TYPE
+	SYNTAX		QtreeEntry
+	ACCESS		not-accessible
+	STATUS		mandatory
+	DESCRIPTION
+	                "Provide details about a particular qtree."
+
+	INDEX   { qtreeVolume, qtreeIndex }
+        ::= { qtreeTable 1 }
+
+        QtreeEntry ::=
+	    SEQUENCE {
+		qtreeIndex	INTEGER,
+		qtreeVolume	INTEGER,
+		qtreeVolumeName	DisplayString,
+		qtreeId	        INTEGER,
+		qtreeName	DisplayString,
+		qtreeStyle	INTEGER,
+		qtreeStatus	INTEGER,
+		qtreeOplock	INTEGER
+	    }	    
+
+	qtreeIndex	OBJECT-TYPE
+    	SYNTAX		INTEGER (1..255)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"Index into the qtree table."  
+	    
+	::= { qtreeEntry 1 }	    
+
+	qtreeVolume	OBJECT-TYPE
+	SYNTAX		INTEGER (1..2147483647)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+	                "A number that identifies the volume that contains
+			this qtree."
+
+	::= { qtreeEntry 2 }
+
+	qtreeVolumeName	OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The name of the volume that contains this qtree. 
+			This includes no /vol/prefix."
+
+	::= { qtreeEntry 3 }	    	    
+
+	qtreeId		OBJECT-TYPE
+    	SYNTAX		INTEGER (1..255)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The Id number of the qtree."  
+	    
+	::= { qtreeEntry 4 }
+
+	qtreeName	OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+	                "The name of the qtree."
+
+	::= { qtreeEntry 5 }	    
+
+	qtreeStyle	OBJECT-TYPE
+        SYNTAX          INTEGER {
+                                unix(1),
+                                ntfs(2),
+				mixed(3)
+                                }
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+	                "The security style of the qtree."
+
+        ::= { qtreeEntry 6 }	    
+
+	qtreeStatus	OBJECT-TYPE
+        SYNTAX          INTEGER {
+                                normal(1),
+                                snapmirrored(2),
+				snapvaulted(3)
+                                }
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+	                "The status of the qtree."
+
+	::= { qtreeEntry 7 }	        
+
+	qtreeOplock	OBJECT-TYPE
+        SYNTAX          INTEGER {
+                                enabled(1),
+                                disabled(2)
+                                }
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                        "An indication of whether the oplocks is enabled or not
+			for this qtree."
+
+	::= { qtreeEntry 8 }
+
+        -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+        --
+        --  All aggregates, including those offline and those
+        --  owned by the cluster partner.
+        --
+        -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+
+        aggrTable       OBJECT-TYPE
+        SYNTAX          SEQUENCE OF AggrEntry
+        ACCESS          not-accessible
+        STATUS          mandatory
+        DESCRIPTION
+                        "List the aggregates defined on the system,
+                        including offline aggregates."
+
+        ::= { filesys 11 }
+
+        aggrEntry       OBJECT-TYPE
+        SYNTAX          AggrEntry
+        ACCESS          not-accessible
+        STATUS          mandatory
+        DESCRIPTION
+                        "Provide details about a particular aggregate."
+        INDEX   { aggrIndex }
+        ::= { aggrTable 1 }
+
+        AggrEntry ::=
+            SEQUENCE {
+                aggrIndex       INTEGER,
+                aggrName        DisplayString,
+                aggrFSID        DisplayString,
+                aggrOwningHost  INTEGER,
+                aggrState       DisplayString,
+                aggrStatus      DisplayString,
+                aggrOptions     DisplayString,
+                aggrUUID        DisplayString,
+		aggrFlexvollist OCTET STRING,
+		aggrType	INTEGER
+            }
+
+        aggrIndex       OBJECT-TYPE
+        SYNTAX          INTEGER (1..2048)
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                        "A number that identifies this aggregate.  The
+                        aggrIndex is not related to any other table
+                        defined in this MIB, and may change as
+                        aggregates are created and destroyed."
+        ::= { aggrEntry 1 }
+
+        aggrName        OBJECT-TYPE
+        SYNTAX          DisplayString
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                        "Name of the aggregate.  This includes no /vol/
+                        prefix."
+        ::= { aggrEntry 2 }
+
+        aggrFSID        OBJECT-TYPE
+        SYNTAX          DisplayString
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                        "Unique identifier for this aggregate."
+        ::= { aggrEntry 3 }
+
+        aggrOwningHost  OBJECT-TYPE
+        SYNTAX          INTEGER {
+                                local(1),
+                                partner(2)
+        }
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                        "Indication of which host owns this aggregate."
+        ::= { aggrEntry 4 }
+
+        aggrState       OBJECT-TYPE
+        SYNTAX          DisplayString
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                        "State of the aggregate, such as 'online' or
+                        'offline'."
+        ::= { aggrEntry 5 }
+
+        aggrStatus      OBJECT-TYPE
+        SYNTAX          DisplayString
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                        "Status of the aggregate, such as 'normal' or
+                        'reconstructing'. May include several values
+                        separated by comma and space."
+        ::= { aggrEntry 6 }
+
+        aggrOptions     OBJECT-TYPE
+        SYNTAX          DisplayString
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                        "Options associated with the aggregate."
+        ::= { aggrEntry 7 }
+
+        aggrUUID        OBJECT-TYPE
+        SYNTAX          DisplayString
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                        "A unique id associated with the aggregate."
+        ::= { aggrEntry 8 }
+
+        aggrFlexvollist OBJECT-TYPE
+        SYNTAX          OCTET STRING (SIZE (0..1024))
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                        "List of all the flexible volumes within this
+			 aggregate."
+        ::= { aggrEntry 9 }
+
+        aggrType     	OBJECT-TYPE
+        SYNTAX          INTEGER {
+                                traditional(1),
+                                aggregate(2)
+        }
+        ACCESS          read-only
+        STATUS         	mandatory 
+        DESCRIPTION
+                        "Type of this container, containers
+			 containing flexible volumes are aggregate."
+        ::= { aggrEntry 10 }
+
+        aggrNumber      OBJECT-TYPE
+        SYNTAX          INTEGER (0..2048)
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                        "Number of aggregates in the aggrTable."
+        ::= { filesys 12 }
+
+	-- -- -- -- -- -- --
+	-- the RAID group --
+	-- -- -- -- -- -- --
+
+	-- Old root volume raid table.  DEPRECATED
+
+	raidTable	OBJECT-TYPE
+	SYNTAX		SEQUENCE OF RaidEntry
+	ACCESS		not-accessible
+	STATUS		deprecated
+	DESCRIPTION
+			"Display RAID configuration information for the
+			 root volume.  This table is deprecated - use
+			 raidVTable instead."
+	::= { raid 1 }
+
+	raidEntry	OBJECT-TYPE
+	SYNTAX		RaidEntry
+	ACCESS		not-accessible
+	STATUS		deprecated
+	DESCRIPTION
+			"Display RAID configuration information for
+			 the referenced disk drive.  This only works for
+			 disks contained within the root volume, and will
+			 include spare drives.  This object is 
+			 deprecated - use raidVEntry instead."
+	INDEX	{ raidIndex }
+	::= { raidTable 1 }
+
+	RaidEntry ::=
+	    SEQUENCE {
+		raidIndex
+		    INTEGER,
+		raidDiskName
+		    DisplayString,
+		raidStatus
+		    INTEGER,
+		raidDiskId
+		    INTEGER,
+		raidScsiAdapter
+		    DisplayString,
+		raidScsiId
+		    INTEGER (0..100),
+		raidUsedMb
+		    INTEGER,
+		raidUsedBlocks
+		    INTEGER,
+		raidTotalMb
+		    INTEGER,
+		raidTotalBlocks
+		    INTEGER,
+		raidCompletionPerCent
+		    INTEGER (0..100)
+	    }
+
+	raidIndex	OBJECT-TYPE
+	SYNTAX		INTEGER (1..2147483647)
+	ACCESS		read-only
+	STATUS		deprecated
+	DESCRIPTION
+			"A number that identifies this entry for the
+			 referenced disk drive."
+	::= { raidEntry 1 }
+
+	raidDiskName	OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS		deprecated
+	DESCRIPTION
+			"The name identifying the referenced disk drive."
+	::= { raidEntry 2 }
+
+	raidStatus	OBJECT-TYPE
+	SYNTAX		INTEGER {
+		active(1),
+		reconstructionInProgress(2),
+		parityReconstructionInProgress(3),
+		parityVerificationInProgress(4),
+		scrubbingInProgress(5),
+		failed(6),
+		addingSpare(7),
+		spare(8),
+		prefailed(9)
+	}
+	ACCESS		read-only
+	STATUS		deprecated
+	DESCRIPTION
+			"The status of the referenced disk drive."
+	::= { raidEntry 3 }
+
+	raidDiskId	OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		deprecated
+	DESCRIPTION
+			"The disk identifier for the referenced disk
+			 drive."
+	::= { raidEntry 4 }
+
+	raidScsiAdapter	OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS		deprecated
+	DESCRIPTION
+			"The identifier of the SCSI adapter for the
+			 referenced disk drive."
+	::= { raidEntry 5 }
+
+	raidScsiId	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		deprecated
+	DESCRIPTION
+			"The identifier for the referenced disk drive
+			 on the referenced SCSI adapter."
+	::= { raidEntry 6 }
+
+	raidUsedMb	OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		deprecated
+	DESCRIPTION
+			"The number of MBytes currently in use on
+			 the referenced disk drive."
+	::= { raidEntry 7 }
+
+	raidUsedBlocks	OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		deprecated
+	DESCRIPTION
+			"The number of Blocks currently in use on
+			 the referenced disk drive."
+	::= { raidEntry 8 }
+
+	raidTotalMb	OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		deprecated
+	DESCRIPTION
+			"The number of MBytes physically available
+			 on the referenced disk drive."
+	::= { raidEntry 9 }
+
+	raidTotalBlocks	OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		deprecated
+	DESCRIPTION
+			"The number of Blocks physically available
+			 on the referenced disk drive."
+	::= { raidEntry 10 }
+
+	raidCompletionPerCent OBJECT-TYPE
+	SYNTAX		      INTEGER (0..100)
+	ACCESS		      read-only
+	STATUS		      deprecated
+	DESCRIPTION
+			 "In the case when reconstruction/adding a
+			  spare, verification or scrubbing is in progress,
+			  the percent of such reconstruction, verification
+			  or scrubbing that has been completed on the
+			  referenced disk drive."
+	::= { raidEntry 11 }
+
+
+	-- Multivolume raidTable.
+
+
+ 	raidVTable	OBJECT-TYPE
+	SYNTAX		SEQUENCE OF RaidVEntry
+	ACCESS		not-accessible
+	STATUS		mandatory
+	DESCRIPTION
+			"Display RAID configuration information."
+	::= { raid 2 }
+
+	raidVEntry	OBJECT-TYPE
+	SYNTAX		RaidVEntry
+	ACCESS		not-accessible
+	STATUS		mandatory
+	DESCRIPTION
+			"Display RAID configuration information for
+			 the referenced volume, raid group, and disk drive."
+	INDEX	{ raidVVol, raidVGroup, raidVIndex }
+	::= { raidVTable 1 }
+
+	RaidVEntry ::=
+	    SEQUENCE {
+		raidVIndex
+		    INTEGER,
+		raidVDiskName
+		    DisplayString,
+		raidVStatus
+		    INTEGER,
+		raidVDiskId
+		    INTEGER,
+		raidVScsiAdapter
+		    DisplayString,
+		raidVScsiId
+		    INTEGER (0..100),
+		raidVUsedMb
+		    INTEGER,
+		raidVUsedBlocks
+		    INTEGER,
+		raidVTotalMb
+		    INTEGER,
+		raidVTotalBlocks
+		    INTEGER,
+		raidVCompletionPerCent
+		    INTEGER (0..100),
+		raidVVol
+		    INTEGER,
+		raidVGroup
+		    INTEGER,
+		raidVDiskNumber
+		    INTEGER,
+		raidVGroupNumber
+		    INTEGER,
+		raidVDiskPort
+		    INTEGER,
+		raidVSecondaryDiskName
+		    DisplayString,
+		raidVSecondaryDiskPort
+		    INTEGER,
+		raidVShelf
+		    INTEGER,
+		raidVBay
+		    INTEGER,
+                raidVPlex
+                    INTEGER, 
+                raidVPlexGroup
+                    INTEGER, 
+                raidVPlexNumber
+                    INTEGER (1..2), 
+                raidVPlexName
+                    DisplayString, 
+                raidVSectorSize
+                    INTEGER, 
+		raidVDiskSerialNumber
+		    DisplayString,
+		raidVDiskVendor
+		    DisplayString,
+		raidVDiskModel
+		    DisplayString,
+		raidVDiskFirmwareRevision
+		    DisplayString,
+		raidVDiskRPM
+		    DisplayString,
+		raidVDiskType
+		    DisplayString,
+		raidVDiskPool
+		    DisplayString,
+		raidVDiskCopyDestDiskName
+		    DisplayString
+	    }
+
+	raidVIndex	OBJECT-TYPE
+	SYNTAX		INTEGER (1..2147483647)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"A number that identifies this disk drive within 
+			 the given volume and RAID group."
+	::= { raidVEntry 1 }
+
+	raidVDiskName	OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The name identifying the referenced disk drive."
+	::= { raidVEntry 2 }
+
+	raidVStatus	OBJECT-TYPE
+	SYNTAX		INTEGER {
+		active(1),
+		reconstructionInProgress(2),
+		parityReconstructionInProgress(3),
+		parityVerificationInProgress(4),
+		scrubbingInProgress(5),
+		failed(6),
+		prefailed(9)
+	}
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The status of the referenced disk drive."
+	::= { raidVEntry 3 }
+
+	raidVDiskId	OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The disk identifier for the referenced disk
+			 drive."
+	::= { raidVEntry 4 }
+
+	raidVScsiAdapter	OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The identifier of the SCSI adapter for the
+			 referenced disk drive."
+	::= { raidVEntry 5 }
+
+	raidVScsiId	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The identifier for the referenced disk drive
+			 on the referenced SCSI adapter."
+	::= { raidVEntry 6 }
+
+	raidVUsedMb	OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of MBytes currently in use on
+			 the referenced disk drive."
+	::= { raidVEntry 7 }
+
+	raidVUsedBlocks	OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of Blocks currently in use on
+			 the referenced disk drive."
+	::= { raidVEntry 8 }
+
+	raidVTotalMb	OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of MBytes physically available
+			 on the referenced disk drive."
+	::= { raidVEntry 9 }
+
+	raidVTotalBlocks	OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of Blocks physically available
+			 on the referenced disk drive."
+	::= { raidVEntry 10 }
+
+	raidVCompletionPerCent OBJECT-TYPE
+	SYNTAX		      INTEGER (0..100)
+	ACCESS		      read-only
+	STATUS		      mandatory
+	DESCRIPTION
+			 "In the case when rapid raid recovery, disk copy,
+			  reconstruction/adding a spare, verification or 
+			  scrubbing is in progress, the percent of such 
+			  copy, reconstruction, verification or scrubbing 
+			  that has been completed on the referenced disk 
+			  drive."
+	::= { raidVEntry 11 }
+
+	raidVVol	OBJECT-TYPE
+	SYNTAX		INTEGER (1..2147483647)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"A number that identifies the volume that this entry
+			 belongs to.  The first volume is '1'."
+	::= { raidVEntry 12 }
+
+	raidVGroup	OBJECT-TYPE
+	SYNTAX		INTEGER (1..2147483647)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"A number that identifies the RAID group within the
+			 given volume that this entry belongs to.  The
+			 first RAID group is '1', and number across all plexes."
+	::= { raidVEntry 13 }
+
+	raidVDiskNumber	OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of disks within this RAID group."
+	::= { raidVEntry 14 }
+
+	raidVGroupNumber OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of RAID groups within this volume."
+	::= { raidVEntry 15 }
+
+	raidVDiskPort	OBJECT-TYPE
+	SYNTAX		INTEGER {
+					portA(1),
+					portB(2),
+					portSingle(3),
+					portNone(4)
+				}
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"A number that indicates which port of the
+			disk is being used by the primary path to the disk.
+			For a dual-ported disk, values of portA and portB
+			indicate which port is being used.
+			If the disk only has a single port, the value
+			is portSingle, and if the port is not active, 
+			the value is portNone."
+	::= { raidVEntry 16 }
+
+	raidVSecondaryDiskName	OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The name identifying the secondary path to
+			the referenced disk drive."
+	::= { raidVEntry 17 }
+
+	raidVSecondaryDiskPort	OBJECT-TYPE
+	SYNTAX		INTEGER {
+					portA(1),
+					portB(2),
+					portSingle(3),
+					portNone(4)
+				}
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"A number that indicates which port of the
+			disk is being used by the secondary path to the disk.
+			For a dual-ported disk, values of portA and portB
+			indicate which port is being used.
+			If the disk only has a single port, the value
+			is portSingle, and if the port is not active, 
+			the value is portNone."
+	::= { raidVEntry 18 }
+
+	raidVShelf	OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"Number identifying the shelf where the disk
+			is located."
+	::= { raidVEntry 19 }
+
+	raidVBay	OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"Number identifying the disk bay within
+			the shelf where the disk is located."
+	::= { raidVEntry 20 }
+
+
+        raidVPlex       OBJECT-TYPE
+        SYNTAX          INTEGER
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                        "A number that identifies the plex within the
+                         given volume that this entry belongs to.  The
+                         first plex is '1'."
+        ::= { raidVEntry 21 } 
+
+        raidVPlexGroup  OBJECT-TYPE
+        SYNTAX          INTEGER
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                        "A number that identifies the RAID group within
+                         the given plex that this entry belongs to.  The
+                         first RAID group is '1'."
+        ::= { raidVEntry 22 } 
+
+	raidVPlexNumber	OBJECT-TYPE
+	SYNTAX		INTEGER (1..2)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of plexes within this volume.
+                        This number is always 1 or 2."
+	::= { raidVEntry 23 }
+
+        raidVPlexName   OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"A name that identifies the plex that this entry
+			 belongs to.  A plex name can be anything, but
+                         is usually a string like 'plex0' or 'plex1'."
+        ::= { raidVEntry 24 } 
+
+        raidVSectorSize OBJECT-TYPE
+        SYNTAX          INTEGER
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                        "A number that specifies bytes per sector
+                         for this entry.  Values are '512' or '520'."
+        ::= { raidVEntry 25 } 
+
+	raidVDiskSerialNumber 	  OBJECT-TYPE
+	SYNTAX			  DisplayString
+	ACCESS          	  read-only
+	STATUS          	  mandatory
+	DESCRIPTION 
+		"Serial number of the referenced disk drive." 
+	::= { raidVEntry 26 } 
+
+	raidVDiskVendor 	  OBJECT-TYPE 
+	SYNTAX			  DisplayString 
+	ACCESS          	  read-only 
+	STATUS          	  mandatory 
+	DESCRIPTION 
+		"The vendor of the referenced disk drive." 
+	::= { raidVEntry 27 } 
+
+	raidVDiskModel 		  OBJECT-TYPE 
+	SYNTAX			  DisplayString 
+	ACCESS          	  read-only 
+	STATUS          	  mandatory 
+	DESCRIPTION 
+		"Model string of the referenced disk drive." 
+	::= { raidVEntry 28 } 
+
+	raidVDiskFirmwareRevision OBJECT-TYPE 
+	SYNTAX			  DisplayString 
+	ACCESS          	  read-only 
+	STATUS          	  mandatory 
+	DESCRIPTION 
+		"Firmware revision number of the referenced disk drive." 
+	::= { raidVEntry 29 } 
+
+	raidVDiskRPM 		  OBJECT-TYPE 
+	SYNTAX			  DisplayString 
+	ACCESS          	  read-only 
+	STATUS          	  mandatory 
+	DESCRIPTION 
+		"RPM of the referenced disk drive." 
+	::= { raidVEntry 30 } 
+
+	raidVDiskType 	  	  OBJECT-TYPE 
+	SYNTAX			  DisplayString 
+	ACCESS          	  read-only 
+	STATUS          	  mandatory 
+	DESCRIPTION 
+		"Interface type of the referenced disk drive. e.g SCSI, 
+		 or ATA." 
+	::= { raidVEntry 31 } 
+
+	raidVDiskPool 	  	  OBJECT-TYPE 
+	SYNTAX			  DisplayString 
+	ACCESS          	  read-only 
+	STATUS          	  mandatory 
+	DESCRIPTION 
+		"A name that identifies the disk pool that this entry 
+		 belongs to."
+	::= { raidVEntry 32 } 
+
+	raidVDiskCopyDestDiskName OBJECT-TYPE 
+	SYNTAX			  DisplayString 
+	ACCESS          	  read-only 
+	STATUS          	  mandatory 
+	DESCRIPTION 
+		"When raidVStatus value is prefailed, this string identifies 
+		 the name of the disk which is the copy target of the 
+		 referenced prefailed disk."
+	::= { raidVEntry 33 } 
+
+	-- Spare disk table.
+
+	spareTable	OBJECT-TYPE
+	SYNTAX		SEQUENCE OF SpareEntry
+	ACCESS		not-accessible
+	STATUS		mandatory
+	DESCRIPTION
+			"Display spare disk configuration information."
+	::= { raid 3 }
+
+	spareEntry	OBJECT-TYPE
+	SYNTAX		SpareEntry
+	ACCESS		not-accessible
+	STATUS		mandatory
+	DESCRIPTION
+			"Display configuration information for
+			 the referenced spare disk drive."
+	INDEX	{ spareIndex }
+	::= { spareTable 1 }
+
+	SpareEntry ::=
+	    SEQUENCE {
+		spareIndex
+		    INTEGER,
+		spareDiskName
+		    DisplayString,
+		spareStatus
+		    INTEGER,
+		spareDiskId
+		    INTEGER,
+		spareScsiAdapter
+		    DisplayString,
+		spareScsiId
+		    INTEGER (0..100),
+		spareTotalMb
+		    INTEGER,
+		spareTotalBlocks
+		    INTEGER,
+		spareDiskPort
+		    INTEGER,
+		spareSecondaryDiskName
+		    DisplayString,
+		spareSecondaryDiskPort
+		    INTEGER,
+		spareShelf
+		    INTEGER,
+		spareBay
+		    INTEGER,
+		sparePool
+		    DisplayString,
+		spareSectorSize
+		    INTEGER,
+		spareDiskSerialNumber
+		    DisplayString,
+		spareDiskVendor
+		    DisplayString,
+		spareDiskModel
+		    DisplayString,
+		spareDiskFirmwareRevision
+		    DisplayString,
+		spareDiskRPM
+		    DisplayString,
+		spareDiskType
+		    DisplayString
+	    }
+
+	spareIndex	OBJECT-TYPE
+	SYNTAX		INTEGER (1..2147483647)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"A number that identifies this entry for the
+			 referenced disk drive in the list of spare disk
+			 drives."
+	::= { spareEntry 1 }
+
+	spareDiskName	OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The name identifying the referenced spare disk 
+			 drive."
+	::= { spareEntry 2 }
+
+	spareStatus	OBJECT-TYPE
+	SYNTAX		INTEGER {
+                            spare(1),
+                            addingspare(2),
+                            bypassed(3),
+                            unknown(4)
+	}
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The status of the referenced spare disk drive."
+	::= { spareEntry 3 }
+
+	spareDiskId	OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The disk identifier for the referenced spare disk
+			 drive."
+	::= { spareEntry 4 }
+
+	spareScsiAdapter	OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The identifier of the SCSI adapter for the
+			 referenced spare disk drive."
+	::= { spareEntry 5 }
+
+	spareScsiId	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The identifier for the referenced spare disk drive
+			 on the referenced SCSI adapter."
+	::= { spareEntry 6 }
+
+	spareTotalMb	OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of MBytes physically available
+			 on the referenced spare disk drive."
+	::= { spareEntry 7 }
+
+	spareTotalBlocks	OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of Blocks physically available
+			 on the referenced spare disk drive."
+	::= { spareEntry 8 }
+
+	spareDiskPort	OBJECT-TYPE
+	SYNTAX		INTEGER {
+					portA(1),
+					portB(2),
+					portSingle(3),
+					portNone(4)
+				}
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"A number that indicates which port of the
+			disk is being used by the primary path to the disk.
+			For a dual-ported disk, values of portA and portB
+			indicate which port is being used.
+			If the disk only has a single port, the value
+			is portSingle, and if the port is not active, 
+			the value is portNone."
+	::= { spareEntry 9 }
+
+	spareSecondaryDiskName	OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The name identifying the secondary path to
+			the referenced disk drive."
+	::= { spareEntry 10 }
+
+	spareSecondaryDiskPort	OBJECT-TYPE
+	SYNTAX		INTEGER {
+					portA(1),
+					portB(2),
+					portSingle(3),
+					portNone(4)
+				}
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"A number that indicates which port of the
+			disk is being used by the secondary path to the disk.
+			For a dual-ported disk, values of portA and portB
+			indicate which port is being used.
+			If the disk only has a single port, the value
+			is portSingle, and if the port is not active, 
+			the value is portNone."
+	::= { spareEntry 11 }
+
+	spareShelf	OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"Number identifying the shelf where the disk
+			is located."
+	::= { spareEntry 12 }
+
+	spareBay	OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"Number identifying the disk bay within
+			the shelf where the disk is located."
+	::= { spareEntry 13 }
+
+        sparePool       OBJECT-TYPE
+        SYNTAX          DisplayString
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                        "A name that identifies the disk pool that this
+                         entry belongs to."
+        ::= { spareEntry 14 } 
+
+        spareSectorSize OBJECT-TYPE
+        SYNTAX          INTEGER
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                        "A number that specifies bytes per sector
+                         for this entry.  Values are '512' or '520'."
+        ::= { spareEntry 15 } 
+
+	spareDiskSerialNumber 	  OBJECT-TYPE 
+	SYNTAX			  DisplayString 
+	ACCESS          	  read-only 
+	STATUS          	  mandatory 
+	DESCRIPTION 
+		"Serial number of the referenced disk drive." 
+	::= { spareEntry 16 } 
+
+	spareDiskVendor 	  OBJECT-TYPE 
+	SYNTAX			  DisplayString 
+	ACCESS          	  read-only 
+	STATUS          	  mandatory 
+	DESCRIPTION 
+		"The vendor of the referenced disk drive." 
+	::= { spareEntry 17 } 
+
+	spareDiskModel 		  OBJECT-TYPE 
+	SYNTAX			  DisplayString 
+	ACCESS          	  read-only 
+	STATUS          	  mandatory 
+	DESCRIPTION 
+		"Model string of the referenced disk drive." 
+	::= { spareEntry 18 } 
+
+	spareDiskFirmwareRevision OBJECT-TYPE 
+	SYNTAX			  DisplayString 
+	ACCESS          	  read-only 
+	STATUS          	  mandatory 
+	DESCRIPTION 
+		"Firmware revision number of the referenced disk drive." 
+	::= { spareEntry 19 } 
+
+	spareDiskRPM 		  OBJECT-TYPE 
+	SYNTAX			  DisplayString 
+	ACCESS          	  read-only 
+	STATUS          	  mandatory 
+	DESCRIPTION 
+		"RPM of the referenced disk drive." 
+	::= { spareEntry 20 } 
+
+	spareDiskType 	  	  OBJECT-TYPE 
+	SYNTAX			  DisplayString 
+	ACCESS          	  read-only 
+	STATUS          	  mandatory 
+	DESCRIPTION 
+		"Interface type of the referenced disk drive. e.g SCSI, 
+		 or ATA." 
+	::= { spareEntry 21 } 
+
+	-- Disk summaries
+
+	diskSummary	OBJECT IDENTIFIER ::= { raid 4 }
+
+	diskTotalCount	OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The total number of disks on the system."
+
+	::= { diskSummary 1 }
+
+	diskActiveCount	OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of disks which are currently active,
+			including parity disks."
+
+	::= { diskSummary 2 }
+
+	diskReconstructingCount	OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of disks which are
+			currently being reconstructed."
+
+	::= { diskSummary 3 }
+
+	diskReconstructingParityCount	OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of parity disks which are
+			currently being reconstructed."
+
+	::= { diskSummary 4 }
+
+	diskVerifyingParityCount	OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of parity disks which are
+			currently being verified."
+
+	::= { diskSummary 5 }
+
+	diskScrubbingCount	OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of disks which are
+			currently being scrubbed."
+
+	::= { diskSummary 6 }
+
+	diskFailedCount	OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of disks which are
+			currently broken."
+
+	::= { diskSummary 7 }
+
+	diskSpareCount	OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of available spare disks."
+
+	::= { diskSummary 8 }
+
+	diskAddingSpareCount	OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of spare disks which are
+			currently being added into a RAID group."
+
+	::= { diskSummary 9 }
+
+	diskFailedMessage	OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"If diskFailedCount is non-zero, this is
+			a string describing the failed disk or 
+			disks.  Each failed disk is described with
+			a sentence like
+
+			Parity disk in volume vol0, RAID group 1, failed.
+
+			or
+
+			Disk on adapter 8a, shelf 1, bay 0, failed."
+
+	::= { diskSummary 10 }
+
+        diskPrefailedCount	OBJECT-TYPE
+        SYNTAX		INTEGER
+        ACCESS		read-only
+	STATUS		mandatory
+        DESCRIPTION
+			"The number of disks which are prefailed and marked
+			  for rapid raid recovery."
+        
+        ::= { diskSummary 11 }
+
+	raidVNumber		OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Number of entries in the raidVTable table.
+			This is the number of volumes in the system."
+
+	::= { raid 5 }
+
+	spareNumber		OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Number of entries in the spareTable table."
+
+	::= { raid 6 }
+
+	otherDiskNumber		OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Number of entries in the otherDiskTable table."
+
+	::= { raid 7 }
+
+	raidPNumber		OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Number of entries in the raidPTable table.
+			This is the number of volumes in the system."
+
+	::= { raid 8 }
+
+	-- Other (out-of-service) disk table.
+
+	otherDiskTable	OBJECT-TYPE
+	SYNTAX		SEQUENCE OF OtherDiskEntry
+	ACCESS		not-accessible
+	STATUS		mandatory
+	DESCRIPTION
+			"Display out-of-service disk configuration information."
+	::= { raid 9 }
+
+	otherDiskEntry	OBJECT-TYPE
+	SYNTAX		OtherDiskEntry
+	ACCESS		not-accessible
+	STATUS		mandatory
+	DESCRIPTION
+			"Display configuration information for
+			 the referenced disk drive."
+	INDEX	{ otherDiskIndex }
+	::= { otherDiskTable 1 }
+
+	OtherDiskEntry ::=
+	    SEQUENCE {
+		otherDiskIndex
+		    INTEGER,
+		otherDiskDiskName
+		    DisplayString,
+		otherDiskStatus
+		    INTEGER,
+		otherDiskDiskId
+		    INTEGER,
+		otherDiskScsiAdapter
+		    DisplayString,
+		otherDiskScsiId
+		    INTEGER (0..100),
+		otherDiskTotalMb
+		    INTEGER,
+		otherDiskTotalBlocks
+		    INTEGER,
+		otherDiskDiskPort
+		    INTEGER,
+		otherDiskSecondaryDiskName
+		    DisplayString,
+		otherDiskSecondaryDiskPort
+		    INTEGER,
+		otherDiskShelf
+		    INTEGER,
+		otherDiskBay
+		    INTEGER,
+		otherDiskPool
+		    DisplayString,
+		otherDiskSectorSize
+		    INTEGER,
+		otherDiskSerialNumber
+		    DisplayString,
+		otherDiskVendor
+		    DisplayString,
+		otherDiskModel
+		    DisplayString,
+		otherDiskFirmwareRevision
+		    DisplayString,
+		otherDiskRPM
+		    DisplayString,
+		otherDiskType
+		    DisplayString
+	    }
+
+	otherDiskIndex	OBJECT-TYPE
+	SYNTAX		INTEGER (1..2147483647)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"A number that identifies this entry for the
+			 referenced disk drive in the list of out-of-service
+			 diskdrives. Out-of-service disks include all disks
+                         that are not in service in a raid group or available
+                         as a spare disk."
+	::= { otherDiskEntry 1 }
+
+	otherDiskDiskName	OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The name identifying the referenced disk 
+			 drive."
+	::= { otherDiskEntry 2 }
+
+	otherDiskStatus	OBJECT-TYPE
+	SYNTAX		INTEGER {
+		broken(1),
+		bypassed(2),
+                unknown(3)
+	}
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The status of the referenced disk drive."
+	::= { otherDiskEntry 3 }
+
+	otherDiskDiskId	OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The disk identifier for the referenced disk
+			 drive."
+	::= { otherDiskEntry 4 }
+
+	otherDiskScsiAdapter	OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The identifier of the SCSI adapter for the
+			 referenced disk drive."
+	::= { otherDiskEntry 5 }
+
+	otherDiskScsiId	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The identifier for the referenced disk drive
+			 on the referenced SCSI adapter."
+	::= { otherDiskEntry 6 }
+
+	otherDiskTotalMb	OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of MBytes physically available
+			 on the referenced disk drive."
+	::= { otherDiskEntry 7 }
+
+	otherDiskTotalBlocks	OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of Blocks physically available
+			 on the referenced disk drive."
+	::= { otherDiskEntry 8 }
+
+	otherDiskDiskPort	OBJECT-TYPE
+	SYNTAX		INTEGER {
+					portA(1),
+					portB(2),
+					portSingle(3),
+					portNone(4)
+				}
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"A number that indicates which port of the
+			disk is being used by the primary path to the disk.
+			For a dual-ported disk, values of portA and portB
+			indicate which port is being used.
+			If the disk only has a single port, the value
+			is portSingle, and if the port is not active, 
+			the value is portNone."
+	::= { otherDiskEntry 9 }
+
+	otherDiskSecondaryDiskName	OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The name identifying the secondary path to
+			the referenced disk drive."
+	::= { otherDiskEntry 10 }
+
+	otherDiskSecondaryDiskPort	OBJECT-TYPE
+	SYNTAX		INTEGER {
+					portA(1),
+					portB(2),
+					portSingle(3),
+					portNone(4)
+				}
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"A number that indicates which port of the
+			disk is being used by the secondary path to the disk.
+			For a dual-ported disk, values of portA and portB
+			indicate which port is being used.
+			If the disk only has a single port, the value
+			is portSingle, and if the port is not active, 
+			the value is portNone."
+	::= { otherDiskEntry 11 }
+
+	otherDiskShelf	OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"Number identifying the shelf where the disk
+			is located."
+	::= { otherDiskEntry 12 }
+
+	otherDiskBay	OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"Number identifying the disk bay within
+			the shelf where the disk is located."
+	::= { otherDiskEntry 13 }
+
+        otherDiskPool     OBJECT-TYPE
+        SYNTAX          DisplayString
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                        "A name that identifies the disk pool that this
+                         entry belongs to."
+        ::= { otherDiskEntry 14 } 
+
+        otherDiskSectorSize OBJECT-TYPE
+        SYNTAX          INTEGER
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                        "A number that specifies bytes per sector
+                         for this entry.  Values are '512' or '520'."
+        ::= { otherDiskEntry 15 } 
+
+	otherDiskSerialNumber 	  OBJECT-TYPE 
+	SYNTAX			  DisplayString 
+	ACCESS          	  read-only 
+	STATUS          	  mandatory 
+	DESCRIPTION 
+		"Serial number of the referenced disk drive." 
+	::= { otherDiskEntry 16 } 
+
+	otherDiskVendor 	  OBJECT-TYPE 
+	SYNTAX			  DisplayString 
+	ACCESS          	  read-only 
+	STATUS          	  mandatory 
+	DESCRIPTION 
+		"The vendor of the referenced disk drive." 
+	::= { otherDiskEntry 17 } 
+
+	otherDiskModel 		  OBJECT-TYPE 
+	SYNTAX			  DisplayString 
+	ACCESS          	  read-only 
+	STATUS          	  mandatory 
+	DESCRIPTION 
+		"Model string of the referenced disk drive." 
+	::= { otherDiskEntry 18 } 
+
+	otherDiskFirmwareRevision OBJECT-TYPE 
+	SYNTAX			  DisplayString 
+	ACCESS          	  read-only 
+	STATUS          	  mandatory 
+	DESCRIPTION 
+		"Firmware revision number of the referenced disk drive." 
+	::= { otherDiskEntry 19 } 
+
+	otherDiskRPM 		  OBJECT-TYPE 
+	SYNTAX			  DisplayString 
+	ACCESS          	  read-only 
+	STATUS          	  mandatory 
+	DESCRIPTION 
+		"RPM of the referenced disk drive." 
+	::= { otherDiskEntry 20 } 
+
+	otherDiskType 	  	  OBJECT-TYPE 
+	SYNTAX			  DisplayString 
+	ACCESS          	  read-only 
+	STATUS          	  mandatory 
+	DESCRIPTION 
+		"Interface type of the referenced disk drive. e.g SCSI, 
+		 or ATA." 
+	::= { otherDiskEntry 21 } 
+
+	-- Multivolume and multiplex raidTable.
+
+	raidPTable	OBJECT-TYPE
+	SYNTAX		SEQUENCE OF RaidPEntry
+	ACCESS		not-accessible
+	STATUS		mandatory
+	DESCRIPTION
+			"Display RAID configuration information."
+	::= { raid 10 }
+
+	raidPEntry	OBJECT-TYPE
+	SYNTAX		RaidPEntry
+	ACCESS		not-accessible
+	STATUS		mandatory
+	DESCRIPTION
+			"Display RAID configuration information for
+			 the referenced volume, plex, raid group, and disk drive."
+	INDEX	{ raidPVol, raidPPlex, raidPGroup, raidPIndex }
+	::= { raidPTable 1 }
+
+	RaidPEntry ::=
+	    SEQUENCE {
+		raidPIndex
+		    INTEGER,
+		raidPStatus
+		    INTEGER,
+		raidPVol
+		    INTEGER,
+                raidPPlex
+                    INTEGER, 
+		raidPGroup
+		    INTEGER,
+		raidPPlexNumber
+		    INTEGER (1..2),
+		raidPGroupNumber
+		    INTEGER,
+		raidPDiskNumber
+		    INTEGER (1..100),
+                raidPPlexName
+                    DisplayString, 
+		raidPDiskName
+		    DisplayString,
+		raidPDiskPort
+		    INTEGER,
+		raidPSecondaryDiskName
+		    DisplayString,
+		raidPSecondaryDiskPort
+		    INTEGER,
+		raidPScsiAdapter
+		    DisplayString,
+		raidPScsiId
+		    INTEGER (0..100),
+		raidPDiskId
+		    INTEGER,
+		raidPShelf
+		    INTEGER,
+		raidPBay
+		    INTEGER,
+                raidPSectorSize
+                    INTEGER, 
+		raidPUsedMb
+		    INTEGER,
+		raidPUsedBlocks
+		    INTEGER,
+		raidPTotalMb
+		    INTEGER,
+		raidPTotalBlocks
+		    INTEGER,
+		raidPCompletionPerCent
+		    INTEGER (0..100),
+		raidPDiskSerialNumber
+		    DisplayString,
+		raidPDiskVendor
+		    DisplayString,
+		raidPDiskModel
+		    DisplayString,
+		raidPDiskFirmwareRevision
+		    DisplayString,
+		raidPDiskRPM
+		    DisplayString,
+		raidPDiskType
+		    DisplayString,
+		raidPDiskPool
+		    DisplayString,
+		raidPDiskCopyDestDiskName
+		    DisplayString
+	    }
+
+	raidPIndex	OBJECT-TYPE
+	SYNTAX		INTEGER (1..2147483647)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"A number that identifies this disk drive within 
+			 the given volume and RAID group."
+	::= { raidPEntry 1 }
+
+	raidPStatus	OBJECT-TYPE
+	SYNTAX		INTEGER {
+				active(1),
+				reconstructionInProgress(2),
+				parityReconstructionInProgress(3),
+				parityVerificationInProgress(4),
+				scrubbingInProgress(5),
+				failed(6),
+				prefailed(9)
+				}
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The status of the referenced disk drive."
+	::= { raidPEntry 2 }
+
+	raidPVol	OBJECT-TYPE
+	SYNTAX		INTEGER (1..2147483647)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"A number that identifies the volume that this entry
+			 belongs to. The first volume is '1'."
+	::= { raidPEntry 3 }
+
+	raidPPlex	OBJECT-TYPE
+	SYNTAX		INTEGER (1..2147483647)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"A number that identifies the plex that this entry
+			 belongs to. The first plex is '1'."
+	::= { raidPEntry 4 }
+
+	raidPGroup	OBJECT-TYPE
+	SYNTAX		INTEGER (1..2147483647)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"A number that identifies the RAID group within the
+			 given plex that this entry belongs to. The
+			 first RAID group is '1'."
+	::= { raidPEntry 5 }
+
+	raidPPlexNumber	OBJECT-TYPE
+	SYNTAX		INTEGER (1..2)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of plexes within this volume.
+                        This number is always 1 or 2."
+	::= { raidPEntry 6 }
+
+	raidPGroupNumber OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of RAID groups within this plex."
+	::= { raidPEntry 7 }
+
+	raidPDiskNumber	OBJECT-TYPE
+	SYNTAX		INTEGER (1..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of disks within this RAID group."
+	::= { raidPEntry 8 }
+
+	raidPPlexName	OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"A name that identifies the plex that this entry
+			 belongs to.  A plex name can be anything, but
+                         is usually a string like 'plex0' or 'plex1'."
+	::= { raidPEntry 9 }
+
+	raidPDiskName	OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The name identifying the referenced disk drive."
+	::= { raidPEntry 10 }
+
+	raidPDiskPort	OBJECT-TYPE
+	SYNTAX		INTEGER {
+                                portA(1),
+                                portB(2),
+                                portSingle(3),
+                                portNone(4)
+				}
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"A number that indicates which port of the
+			disk is being used by the primary path to the disk.
+			For a dual-ported disk, values of portA and portB
+			indicate which port is being used.
+			If the disk only has a single port, the value
+			is portSingle, and if the port is not active, 
+			the value is portNone."
+	::= { raidPEntry 11 }
+
+	raidPSecondaryDiskName	OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The name identifying the secondary path to
+			the referenced disk drive."
+	::= { raidPEntry 12 }
+
+	raidPSecondaryDiskPort	OBJECT-TYPE
+	SYNTAX		INTEGER {
+                                portA(1),
+                                portB(2),
+                                portSingle(3),
+                                portNone(4)
+				}
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"A number that indicates which port of the
+			disk is being used by the secondary path to the disk.
+			For a dual-ported disk, values of portA and portB
+			indicate which port is being used.
+			If the disk only has a single port, the value
+			is portSingle, and if the port is not active, 
+			the value is portNone."
+	::= { raidPEntry 13 }
+
+	raidPScsiAdapter	OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The identifier of the SCSI adapter for the
+			 referenced disk drive."
+	::= { raidPEntry 14 }
+
+	raidPScsiId	OBJECT-TYPE
+	SYNTAX		INTEGER (0..100)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The identifier for the referenced disk drive
+			 on the referenced SCSI adapter."
+	::= { raidPEntry 15 }
+
+	raidPDiskId	OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The disk identifier for the referenced disk
+			 drive."
+	::= { raidPEntry 16 }
+
+	raidPShelf	OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"Number identifying the shelf where the disk
+			is located."
+	::= { raidPEntry 17 }
+
+	raidPBay	OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"Number identifying the disk bay within
+			the shelf where the disk is located."
+	::= { raidPEntry 18 }
+
+
+        raidPSectorSize OBJECT-TYPE
+        SYNTAX          INTEGER
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                        "A number that specifies bytes per sector
+                         for this entry.  Values are '512' or '520'."
+        ::= { raidPEntry 19 } 
+
+	raidPUsedMb	OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of MBytes currently in use on
+			 the referenced disk drive."
+	::= { raidPEntry 20 }
+
+	raidPUsedBlocks	OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of Blocks currently in use on
+			 the referenced disk drive."
+	::= { raidPEntry 21 }
+
+	raidPTotalMb	OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of MBytes physically available
+			 on the referenced disk drive."
+	::= { raidPEntry 22 }
+
+	raidPTotalBlocks	OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The number of Blocks physically available
+			 on the referenced disk drive."
+	::= { raidPEntry 23 }
+
+	raidPCompletionPerCent OBJECT-TYPE
+	SYNTAX		      INTEGER (0..100)
+	ACCESS		      read-only
+	STATUS		      mandatory
+	DESCRIPTION
+			 "In the case when rapid raid recovery, disk copy,
+			  reconstruction or adding a spare, verification or 
+			  scrubbing is in progress, the percent of such copy, 
+			  reconstruction, verification or scrubbing that has 
+			  been completed on the referenced disk drive."
+	::= { raidPEntry 24 }
+
+	raidPDiskSerialNumber 	  OBJECT-TYPE
+	SYNTAX			  DisplayString
+	ACCESS          	  read-only
+	STATUS          	  mandatory
+	DESCRIPTION 
+		"Serial number of the referenced disk drive." 
+	::= { raidPEntry 25 } 
+
+	raidPDiskVendor 	  OBJECT-TYPE 
+	SYNTAX			  DisplayString 
+	ACCESS          	  read-only 
+	STATUS          	  mandatory 
+	DESCRIPTION 
+		"The vendor of the referenced disk drive." 
+	::= { raidPEntry 26 } 
+
+	raidPDiskModel 		  OBJECT-TYPE 
+	SYNTAX			  DisplayString 
+	ACCESS          	  read-only 
+	STATUS          	  mandatory 
+	DESCRIPTION 
+		"Model string of the referenced disk drive." 
+	::= { raidPEntry 27 } 
+
+	raidPDiskFirmwareRevision OBJECT-TYPE 
+	SYNTAX			  DisplayString 
+	ACCESS          	  read-only 
+	STATUS          	  mandatory 
+	DESCRIPTION 
+		"Firmware revision number of the referenced disk drive." 
+	::= { raidPEntry 28 } 
+
+	raidPDiskRPM 		  OBJECT-TYPE 
+	SYNTAX			  DisplayString 
+	ACCESS          	  read-only 
+	STATUS          	  mandatory 
+	DESCRIPTION 
+		"RPM of the referenced disk drive." 
+	::= { raidPEntry 29 } 
+
+	raidPDiskType 	  	  OBJECT-TYPE 
+	SYNTAX			  DisplayString 
+	ACCESS          	  read-only 
+	STATUS          	  mandatory 
+	DESCRIPTION 
+		"Interface type of the referenced disk drive. e.g SCSI, 
+		 or ATA." 
+	::= { raidPEntry 30 } 
+
+	raidPDiskPool 	  	  OBJECT-TYPE 
+	SYNTAX			  DisplayString 
+	ACCESS          	  read-only 
+	STATUS          	  mandatory 
+	DESCRIPTION 
+		"A name that identifies the disk pool that this entry 
+		 belongs to."
+	::= { raidPEntry 31 } 
+
+	raidPDiskCopyDestDiskName OBJECT-TYPE 
+	SYNTAX			  DisplayString 
+	ACCESS          	  read-only 
+	STATUS          	  mandatory 
+	DESCRIPTION 
+		"When raidPStatus value is prefailed, this string identifies 
+		 the name of the disk which is the copy target of the 
+		 referenced prefailed disk."
+	::= { raidPEntry 32 } 
+
+	-- RAID Plex table.
+
+        plexTable   OBJECT-TYPE
+        SYNTAX      SEQUENCE OF PlexEntry
+        ACCESS      not-accessible
+        STATUS      mandatory
+        DESCRIPTION
+                    "A table containing plex specific information."
+        ::= {raid 11}
+
+        -- display plexes 
+
+        plexEntry       OBJECT-TYPE
+        SYNTAX          PlexEntry 
+        ACCESS          not-accessible
+        STATUS          mandatory
+        DESCRIPTION
+                        "Provide a report on file system plexes."
+        INDEX           { plexIndex } 
+        ::= { plexTable 1 }
+
+        PlexEntry ::=
+            SEQUENCE {
+                plexIndex
+                    INTEGER,
+                plexName
+                    DisplayString,
+                plexVolName
+                    DisplayString,
+                plexStatus
+                    INTEGER,
+                plexPercentResyncing
+                    INTEGER
+            } 
+
+        plexIndex       OBJECT-TYPE
+        SYNTAX          INTEGER (1..2147483647)
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                        "A number that identifies this entry for the
+                         referenced plex."
+        ::= { plexEntry 1 }
+
+        plexName        OBJECT-TYPE
+        SYNTAX          DisplayString
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                        "The identifier of the plex."
+        ::= { plexEntry 2 }
+
+        plexVolName     OBJECT-TYPE
+        SYNTAX          DisplayString
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                        "The volume to which this plex belongs."
+        ::= { plexEntry 3 }
+
+        plexStatus      OBJECT-TYPE
+        SYNTAX          INTEGER { 
+		offline(1),
+		resyncing(2),
+		online(3)
+	} 
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                        "The status of the plex."
+        ::= { plexEntry 4 }
+
+        plexPercentResyncing OBJECT-TYPE
+        SYNTAX               INTEGER 
+        ACCESS               read-only
+        STATUS               mandatory
+        DESCRIPTION
+                             "If the plex is resyncing, the percent 
+                              completion of the resync."
+        ::= { plexEntry 5 }
+
+	--out-of-dateDisks
+
+	outOfDateDiskCount	OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Number of entries in the outOfDateDiskTable table."
+
+	::= { raid 12 }
+
+	-- out-of-date disk table.
+
+	outOfDateDiskTable	OBJECT-TYPE
+	SYNTAX		SEQUENCE OF OutOfDateDiskEntry
+	ACCESS		not-accessible
+	STATUS		mandatory
+	DESCRIPTION
+			"Display out-of-date disk information."
+	::= { raid 13 }
+
+	outOfDateDiskEntry	OBJECT-TYPE
+	SYNTAX		OutOfDateDiskEntry
+	ACCESS		not-accessible
+	STATUS		mandatory
+	DESCRIPTION
+			"Display information for the referenced
+			 out-of-date disk."
+	INDEX	{ outOfDateDiskIndex }
+	::= { outOfDateDiskTable 1 }
+
+	OutOfDateDiskEntry ::=
+	    SEQUENCE {
+		outOfDateDiskIndex
+		    INTEGER,
+		outOfDateDiskDiskName
+		    DisplayString,
+		outOfDateDiskDiskId
+		    INTEGER,
+		outOfDateDiskScsiAdapter
+		    DisplayString,
+		outOfDateDiskScsiId
+		    INTEGER (0..100),
+		outOfDateDiskTotalMb
+		    INTEGER,
+		outOfDateDiskTotalBlocks
+		    INTEGER,
+		outOfDateDiskDiskPort
+		    INTEGER,
+		outOfDateDiskSecondaryDiskName
+		    DisplayString,
+		outOfDateDiskSecondaryDiskPort
+		    INTEGER,
+		outOfDateDiskShelf
+		    INTEGER,
+		outOfDateDiskBay
+		    INTEGER,
+		outOfDateDiskPool
+		    DisplayString,
+		outOfDateDiskSectorSize
+		    INTEGER,
+		outOfDateDiskSerialNumber
+		    DisplayString,
+		outOfDateDiskVendor
+		    DisplayString,
+		outOfDateDiskModel
+		    DisplayString,
+		outOfDateDiskFirmwareRevision
+		    DisplayString,
+		outOfDateDiskRPM
+		    DisplayString,
+		outOfDateDiskType
+		    DisplayString
+	    }
+
+	outOfDateDiskIndex	OBJECT-TYPE
+	SYNTAX			INTEGER (1..2147483647)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"A number that identifies this entry for the
+			 referenced disk drive in the list of out-of-date
+			 diskdrives."
+	::= { outOfDateDiskEntry 1 }
+
+	outOfDateDiskDiskName	OBJECT-TYPE
+	SYNTAX			DisplayString
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The name identifying the referenced disk 
+			 drive."
+	::= { outOfDateDiskEntry 2 }
+
+	outOfDateDiskDiskId	OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The disk identifier for the referenced disk
+			 drive."
+	::= { outOfDateDiskEntry 3 }
+
+	outOfDateDiskScsiAdapter	OBJECT-TYPE
+	SYNTAX				DisplayString
+	ACCESS				read-only
+	STATUS				mandatory
+	DESCRIPTION
+			"The identifier of the SCSI adapter for the
+			 referenced disk drive."
+	::= { outOfDateDiskEntry 4 }
+
+	outOfDateDiskScsiId	OBJECT-TYPE
+	SYNTAX			INTEGER (0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The identifier for the referenced disk drive
+			 on the referenced SCSI adapter."
+	::= { outOfDateDiskEntry 5 }
+
+	outOfDateDiskTotalMb	OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of MBytes physically available
+			 on the referenced disk drive."
+	::= { outOfDateDiskEntry 6 }
+
+	outOfDateDiskTotalBlocks	OBJECT-TYPE
+	SYNTAX				INTEGER
+	ACCESS				read-only
+	STATUS				mandatory
+	DESCRIPTION
+			"The number of Blocks physically available
+			 on the referenced disk drive."
+	::= { outOfDateDiskEntry 7 }
+
+	outOfDateDiskDiskPort		OBJECT-TYPE
+	SYNTAX				INTEGER {
+						portA(1),
+						portB(2),
+						portSingle(3),
+						portNone(4)
+					}
+	ACCESS				read-only
+	STATUS				mandatory
+	DESCRIPTION
+			"A number that indicates which port of the
+			disk is being used by the primary path to the disk.
+			For a dual-ported disk, values of portA and portB
+			indicate which port is being used.
+			If the disk only has a single port, the value
+			is portSingle, and if the port is not active, 
+			the value is portNone."
+	::= { outOfDateDiskEntry 8 }
+
+	outOfDateDiskSecondaryDiskName	OBJECT-TYPE
+	SYNTAX				DisplayString
+	ACCESS				read-only
+	STATUS				mandatory
+	DESCRIPTION
+			"The name identifying the secondary path to
+			the referenced disk drive."
+	::= { outOfDateDiskEntry 9 }
+
+	outOfDateDiskSecondaryDiskPort	OBJECT-TYPE
+	SYNTAX				INTEGER {
+						portA(1),
+						portB(2),
+						portSingle(3),
+						portNone(4)
+					}
+	ACCESS				read-only
+	STATUS				mandatory
+	DESCRIPTION
+			"A number that indicates which port of the
+			disk is being used by the secondary path to the disk.
+			For a dual-ported disk, values of portA and portB
+			indicate which port is being used.
+			If the disk only has a single port, the value
+			is portSingle, and if the port is not active, 
+			the value is portNone."
+	::= { outOfDateDiskEntry 10 }
+
+	outOfDateDiskShelf	OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Number identifying the shelf where the disk
+			is located."
+	::= { outOfDateDiskEntry 11 }
+
+	outOfDateDiskBay	OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Number identifying the disk bay within
+			the shelf where the disk is located."
+	::= { outOfDateDiskEntry 12 }
+
+        outOfDateDiskPool	OBJECT-TYPE
+        SYNTAX          	DisplayString
+        ACCESS          	read-only
+        STATUS          	mandatory
+        DESCRIPTION
+                        "A name that identifies the disk pool that this
+                         entry belongs to."
+        ::= { outOfDateDiskEntry 13 } 
+
+        outOfDateDiskSectorSize OBJECT-TYPE
+        SYNTAX         		INTEGER
+        ACCESS         		read-only
+        STATUS         		mandatory
+        DESCRIPTION
+                        "A number that specifies bytes per sector
+                         for this entry.  Values are '512' or '520'."
+        ::= { outOfDateDiskEntry 14 } 
+
+	outOfDateDiskSerialNumber 	OBJECT-TYPE 
+	SYNTAX				DisplayString 
+	ACCESS          		read-only 
+	STATUS          		mandatory 
+	DESCRIPTION 
+		"Serial number of the referenced disk drive." 
+	::= { outOfDateDiskEntry 15 } 
+
+	outOfDateDiskVendor 		OBJECT-TYPE 
+	SYNTAX				DisplayString 
+	ACCESS          		read-only 
+	STATUS          		mandatory 
+	DESCRIPTION 
+		"The vendor of the referenced disk drive." 
+	::= { outOfDateDiskEntry 16 } 
+
+	outOfDateDiskModel 		OBJECT-TYPE 
+	SYNTAX				DisplayString 
+	ACCESS          		read-only 
+	STATUS          		mandatory 
+	DESCRIPTION 
+		"Model string of the referenced disk drive." 
+	::= { outOfDateDiskEntry 17 } 
+
+	outOfDateDiskFirmwareRevision 	OBJECT-TYPE 
+	SYNTAX				DisplayString 
+	ACCESS          		read-only 
+	STATUS          		mandatory 
+	DESCRIPTION 
+		"Firmware revision number of the referenced disk drive." 
+	::= { outOfDateDiskEntry 18 } 
+
+	outOfDateDiskRPM 	  OBJECT-TYPE 
+	SYNTAX			  DisplayString 
+	ACCESS          	  read-only 
+	STATUS          	  mandatory 
+	DESCRIPTION 
+		"RPM of the referenced disk drive." 
+	::= { outOfDateDiskEntry 19 } 
+
+	outOfDateDiskType   	  OBJECT-TYPE 
+	SYNTAX			  DisplayString 
+	ACCESS          	  read-only 
+	STATUS          	  mandatory 
+	DESCRIPTION 
+		"Interface type of the referenced disk drive. e.g SCSI, 
+		 or ATA." 
+	::= { outOfDateDiskEntry 20 } 
+
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+	-- the CIFS group    --
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+
+
+	cifsOptions	OBJECT IDENTIFIER ::= { cifs 1 }
+
+	cifsInfo	OBJECT IDENTIFIER ::= { cifs 2 }
+
+	cifsStats	OBJECT IDENTIFIER ::= { cifs 3 }
+
+	cifsMisc	OBJECT IDENTIFIER ::= { cifs 4 }
+
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+	-- the cifsOptions group
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+
+	cifsIsEnabled	OBJECT-TYPE
+	SYNTAX		INTEGER {
+					false(1),
+					true(2)
+				}
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"Whether the CIFS protocol is active on the
+			 filer."
+	::= { cifsOptions 1 }
+		
+	cifsIsLoginEnabled	OBJECT-TYPE
+	SYNTAX			INTEGER {
+						false(1),
+						true(2)
+					}
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Whether new CIFS connections to the filer
+			 are currently allowed."
+	::= { cifsOptions 2 }
+		
+
+	cifsHostName	OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The host name used by the CIFS protocol on this
+			 filer."
+	::= { cifsOptions 3 }
+
+		
+	cifsAltNames	OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"Alternate names recognized by the filer."
+	::= { cifsOptions 4 }
+
+		
+	cifsDomainJoined	OBJECT-TYPE
+	SYNTAX			INTEGER {
+					    false(1),
+					    true(2)
+					}
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Has the filer joined an NT domain?
+			 If this value is true, cifsDomainName
+			 will contain the name of the domain.
+			 Otherwise, the filer may have joined
+			 a WorkGroup, and cifsWGName will contain
+			 the name of the WorkGroup. "
+        ::= { cifsOptions 5 }
+
+ 
+ 	cifsDomainName	OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The domain name used by the CIFS 
+			 protocol on this filer."
+	::= { cifsOptions 6 }
+
+
+	cifsWGName	OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The workgroup name (if any) used by 
+			 the CIFS protocol on this filer."
+	::= { cifsOptions 7 }
+
+		
+	cifsDCName	OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The name of the Domain Controller used by
+			 this filer to authenticate users and file
+			 requests."
+	::= { cifsOptions 8 }
+		
+
+	cifsIsWinsEnabled	OBJECT-TYPE
+	SYNTAX			INTEGER {
+					    false(1),
+					    true(2)
+					}
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"True if WINS name resolution is enabled
+			 on the filer."
+	::= { cifsOptions 9 }
+		
+
+	cifsWinsServers	OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The name(s) of the WINS servers registered
+			 with the filer."
+	::= { cifsOptions 10 }
+
+
+	cifsSecurityModel	OBJECT-TYPE
+	SYNTAX			INTEGER {
+					    unix(1),
+					    pc(2)
+					}
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Which type of authentication semantics
+			 (Unix or PC) are in use for PC access to 
+			 Unix files on the filer. If Unix semantics
+			 are in use, no ACL on a Unix file is ever 
+			 checked. If PC semantics are in use, the 
+			 share level ACL on the share containing the 
+			 file is used for authentication instead of 
+			 the group portion of the permissions on 
+			 the file."
+	::= { cifsOptions 11 }
+		
+		
+	cifsPCGenericUser	OBJECT-TYPE
+	SYNTAX			DisplayString
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The name of the generic PC user, if any.  This
+			 username is used for CIFS access by Unix users
+			 who have not authenticated through CIFS or NT."
+	::= { cifsOptions 12 }	
+	
+	  
+	cifsOplocksEnabled	OBJECT-TYPE
+	SYNTAX			INTEGER {
+					not-enabled(1),
+					enabled(2)
+				}
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Whether oplocks are enabled on the filer."
+	::= { cifsOptions 15 }
+
+		
+	cifsLevel2OplocksEnabled OBJECT-TYPE
+	SYNTAX			INTEGER {
+					not-enabled(1),
+					enabled(2)
+				}
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Whether level 2 oplocks are enabled on the filer."
+	::= { cifsOptions 16 }
+
+
+	cifsPreserveCase	OBJECT-TYPE
+	SYNTAX			INTEGER {
+					no-preserve-case(1),
+					preserve-case(2)
+				}
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"If this option is set to preserve-case
+			 (the default), all filename references
+			 will be case preserving.  Otherwise,
+			 they are forced to lowercase."
+	::= { cifsOptions 17 }
+		
+		
+	cifsSymlinksEnabled	OBJECT-TYPE
+	SYNTAX			INTEGER {
+					not-enabled(1),
+					enabled(2)
+				}
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"If this option is enabled, CIFS accesses will
+			 follow symbolic links using Unix semantics."
+	::= { cifsOptions 19 }	
+
+
+	cifsSymlinkCycleProtEnabled	OBJECT-TYPE
+	SYNTAX			INTEGER {
+					not-enabled(1),
+					enabled(2)
+				}
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"If this option is enabled, CIFS accesses will
+			 through symbolic links will check for cycles
+			 in the link graph."
+	::= { cifsOptions 20 }	
+		
+
+	cifsIsLicensed	OBJECT-TYPE
+	SYNTAX		INTEGER {
+					false(1),
+					true(2)
+				}
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"Whether the CIFS protocol is licensed on the
+			 filer."
+	::= { cifsOptions 21 }
+		
+	cifsPerClientStatsEnabled	OBJECT-TYPE
+	SYNTAX		INTEGER {
+					false(1),
+					true(2)
+				}
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"True when cifs.per_client_stats are
+			 being collected."
+	::= { cifsOptions 22 }
+
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+	-- the cifsInfo group
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+
+	cifsStatus		OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Encoding of CIFS startup state on the filer."
+              ::= { cifsInfo 1 }
+ 
+	cifsNeedPW		OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Does the administrative password need 
+			 to be set before start?"
+	::= { cifsInfo 2 }
+		
+	cifsTimeToShutdown	OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Time remaining until CIFS shutdown"
+	::= { cifsInfo 3 }
+
+	
+ 	cifsMaxConnections	OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The maximum number of simultaneous CIFS 
+			 connections allowed on the filer."
+	::= { cifsInfo 4 }
+		
+	cifsMaxTrees		OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The maximum number of simultaneous CIFS
+			 trees allowed on the filer."
+	::= { cifsInfo 5 }
+		
+	cifsMaxShares		OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The maximum number of simultaneous CIFS
+			 shares allowed on the filer."
+	::= { cifsInfo 6 }
+		
+	cifsMaxFiles		OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The maximum number of concurrently open CIFS
+			 files and directories allowed on the filer."
+	::= { cifsInfo 7 }
+
+
+	cifsMaxACLs		OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"This object is deprecated, and always has a
+			 value of 0."
+	::= { cifsInfo 8 }
+
+		
+	cifsConnectedUsers	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The current number of CIFS users on the
+			 filer."
+	::= { cifsInfo 9 }
+		
+	cifsNTrees		OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The current number of CIFS trees on the
+			 filer."
+	::= { cifsInfo 10 }
+		
+	cifsNShares		OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The current number of CIFS shares on the
+			 filer."
+	::= { cifsInfo 11 }
+		
+	cifsNSessions		OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The current number of active CIFS sessions
+			 on the filer."
+	::= { cifsInfo 12 }
+		
+	cifsNOpenFiles		OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of open CIFS files and directories
+			 on the filer."
+	::= { cifsInfo 13 }
+		
+	cifsNOpenDirs		OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of open CIFS directories on the
+			 filer."
+	::= { cifsInfo 14 }
+			
+
+	cifsNOplockBreakWaits	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of open files waiting for oplock
+			 break messages to be sent."
+	::= { cifsInfo 16 }
+
+		
+	cifsNOplockAckWaits	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of open files waiting for 
+			 acknowledgements to oplock break messages."
+	::= { cifsInfo 17 }
+
+	cifsSuspectOps		OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"A smoothed average of the number of events 
+			 per second of the type frequently seen
+			 during virus attacks."
+	::= { cifsInfo 18 }
+
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+	-- the cifsStats group
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+
+		-- this group contains cifs statistics since the last
+		-- time the statistics were cleared
+
+	cifsServ	 OBJECT IDENTIFIER ::= { cifsStats 1 }
+
+	-- cifsPerClient OBJECT IDENTIFIER ::= { cifsStats 2 }
+
+		-- no per-client stats are kept as of the 5.3 release
+
+
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+	-- the cifsServ group
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+
+		-- this group contains statistics for CIFS
+		-- status, and calls processed since the last
+		-- time the statistics were cleared
+
+	cifsOps		OBJECT IDENTIFIER ::= { cifsServ 1 }
+
+	cifsReqs	OBJECT IDENTIFIER ::= { cifsServ 2 }
+
+	cifsPercent	OBJECT IDENTIFIER ::= { cifsServ 3 }
+
+	cifsObsReqs	OBJECT IDENTIFIER ::= { cifsServ 4 }
+
+	cifsObsPercent	OBJECT IDENTIFIER ::= { cifsServ 5 }
+
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
+	-- the cifsOps group
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
+
+	cifsTotalOps		OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of CIFS operations done by the filer,
+			 since the last time the statistics were cleared."
+	::= { cifsOps 1 }	
+
+	cifsTotalCalls	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The total number of CIFS calls received, since
+			 the last time the statistics were cleared.  This
+			 is the number of cifsTotalOps plus the number of
+			 miscellaneous operations that are not logged
+			 which were received in that time period."
+	::= { cifsOps 2 }
+
+	cifsBadCalls	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The total number of received CIFS calls rejected,
+			 since the last time the statistics were cleared."
+	::= { cifsOps 3 }
+
+ 
+	cifsGetAttrs		OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The total number of CIFS operations to get
+			 the attributes on a file or directory, since
+			 the last time the statistics were reset."
+        ::= { cifsOps 4 }
+ 
+ 
+	cifsReads		OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The total number of CIFS Read operations on
+			 a file or directory, since the last time the
+			 statistics were reset."
+	::= { cifsOps 5 }
+ 
+ 
+	cifsWrites		OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The total number of CIFS write operations on
+			 a file or directory, since the last time the
+			 statistics were reset."
+	::= { cifsOps 6 }
+ 
+ 
+	cifsLocks		OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of CIFS file locking requests
+			 since the last time the statistics were reset."
+	::= { cifsOps 7 }
+ 
+
+	cifsOpens		OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of calls, via CIFS, to open
+			 a file or directory, since the last time
+			 the statistics were reset."
+	::= { cifsOps 8 }
+ 
+ 
+ 	cifsDirOps		OBJECT-TYPE
+ 	SYNTAX			Counter
+ 	ACCESS			read-only
+ 	STATUS			mandatory
+ 	DESCRIPTION
+			"The number of CIFS directory operations,
+			 since the last time the statistics were reset."
+        ::= { cifsOps 9 }
+
+
+ 	cifsOthers		OBJECT-TYPE
+ 	SYNTAX			Counter
+ 	ACCESS			read-only
+ 	STATUS			mandatory
+ 	DESCRIPTION
+			"The number of CIFS operations, since the
+			 last time the statistics were reset, that
+			 don't fall into the categories for GetAttr,
+			 Read, Write, Lock, DirOp and Open."
+        ::= { cifsOps 10 }
+ 
+ 	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
+	-- the cifsReqs group
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
+
+		-- this group contains statistics for the number of
+		-- calls received for each CIFS SMB request
+		-- since the last time the statistics were cleared
+
+	smbNegProts		OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB NEGOTIATE requests,
+			 since the last time the statistics were cleared."
+	::= { cifsReqs 1 }
+
+	smbSessionSetupAndXs	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB SESSION_SETUP_ANDX requests,
+			 since the last time the statistics were cleared."
+	::= { cifsReqs 2 }
+
+	smbLogoffAndXs		OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB LOGOFF_ANDX requests,
+			 since the last time the statistics were cleared."
+	::= { cifsReqs 3 }
+
+	smbTreeConnectAndXs	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB TREE_CONNECT_ANDX requests,
+			 since the last time the statistics were cleared."
+	::= { cifsReqs 4 }
+
+	smbTreeDisconnects	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB TREE_DISCONNECT requests,
+			 since the last time the statistics were cleared."
+	::= { cifsReqs 5 }
+
+	smbTrans2QueryFSInfos	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB TRANS2_QUERY_FS_INFORMATION
+			 requests, since the last time the statistics 
+			 were cleared."
+	::= { cifsReqs 6 }
+
+	smbEchos		OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB ECHO requests,
+			 since the last time the statistics were cleared."
+	::= { cifsReqs 7 }
+
+	smbNTCancels		OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB NT_CANCEL requests, since the
+			 last time the statistics were cleared."
+	::= { cifsReqs 8 }
+
+	smbNTCreateAndXs	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB NT_CREATE_ANDX requests,
+			 since the last time the statistics were cleared."
+	::= { cifsReqs 9 }
+
+	smbNTTransactCreates	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB NT_TRANSACT_CREATE requests,
+			 since the last time the statistics were cleared."
+	::= { cifsReqs 10 }
+
+	smbCreateTemporaries	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The SMB CREATE_TEMPORARY operation is not presently
+			 supported, so this value should always be zero."
+	::= { cifsReqs 11 }
+
+	smbReadAndXs		OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB READ_ANDX requests,
+			 since the last time the statistics were cleared."
+	::= { cifsReqs 12 }
+
+	smbWriteAndXs		OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB WRITE_ANDX requests,
+			 since the last time the statistics were cleared."
+	::= { cifsReqs 13 }
+
+	smbLockingAndXs		OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB LOCKING_ANDX requests,
+			 since the last time the statistics were cleared."
+	::= { cifsReqs 14 }
+
+	smbSeeks		OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB SEEK requests,
+			 since the last time the statistics were cleared."
+	::= { cifsReqs 15 }
+
+	smbFlushes		OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB FLUSH requests,
+			 since the last time the statistics were cleared."
+	::= { cifsReqs 16 }
+
+	smbCloses		OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB CLOSE requests,
+			 since the last time the statistics were cleared."
+	::= { cifsReqs 17 }
+
+	smbDeletes		OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB DELETE requests,
+			 since the last time the statistics were cleared."
+	::= { cifsReqs 18 }
+
+	smbRenames		OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB RENAME requests,
+			 since the last time the statistics were cleared."
+	::= { cifsReqs 19 }
+
+	smbMoves		OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The SMB MOVE request is not presently supported,
+			 so this value should always be zero."
+	::= { cifsReqs 20 }
+
+	smbCopies		OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The SMB COPY request is not presently supported,
+			 so this value should always be zero."
+	::= { cifsReqs 21 }
+
+	smbTrans2QueryPathInfos	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB TRANS2_QUERY_PATH_INFORMATION
+			 requests, since the last time the statistics 
+			 were cleared."
+	::= { cifsReqs 22 }
+
+	smbTrans2QueryFileInfos	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB TRANS2_QUERY_FILE_INFORMATION
+			 requests, since the last time the statistics 
+			 were cleared."
+	::= { cifsReqs 23 }
+
+	smbTrans2SetPathInfos	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB TRANS2_SET_PATH_INFORMATION
+			 requests, since the last time the statistics 
+			 were cleared."
+	::= { cifsReqs 24 }
+
+	smbTrans2SetFileInfos	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB TRANS2_SET_FILE_INFORMATION
+			 requests, since the last time the statistics 
+			 were cleared."
+	::= { cifsReqs 25 }
+
+	smbDeleteDirs		OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB DELETE_DIRECTORY requests,
+			 since the last time the statistics were cleared."
+	::= { cifsReqs 26 }
+
+	smbCheckDirs		OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The SMB COPY request is not presently supported,
+			 so this value should always be zero."
+	::= { cifsReqs 27 }
+
+	smbTrans2FindFirst2s	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB TRANS2_FIND_FIRST2 requests,
+			 since the last time the statistics were cleared."
+	::= { cifsReqs 28 }
+
+	smbTrans2FindNext2s	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB TRANS2_FIND_NEXT2 requests,
+			 since the last time the statistics were cleared."
+	::= { cifsReqs 29 }
+
+	smbFindClose2s		OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB FIND_CLOSE2 requests,
+			 since the last time the statistics were cleared."
+	::= { cifsReqs 30 }
+
+	smbNTTransactNotifyChgs	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB NT_TRANSACT_NOTIFY_CHANGE
+			 requests, since the last time the statistics 
+			 were cleared."
+	::= { cifsReqs 31 }
+
+	smbTrans2GetDFSReferrals	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The SMB TRANS2_GET_DFS_REFERRAL request is 
+			 not presently supported, so this value should 
+			 always be zero."
+	::= { cifsReqs 32 }
+
+	smbTrans2ReportDFSIncs	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The SMB TRANS2_REPORT_DFS_INCONSISTENCY request is 
+			 not presently supported, so this value should 
+			 always be zero."
+	::= { cifsReqs 33 }
+
+	smbOpenPrintFiles	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The SMB OPEN_PRINT_FILE request is not supported,
+			 so this value should always be zero."
+	::= { cifsReqs 34 }
+
+	smbGetPrintQueues	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The SMB GET_PRINT_QUEUE request is not supported,
+			 so this value should always be zero."
+	::= { cifsReqs 35 }
+
+	smbNTTransactIoctls	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB NT_TRANSACT_IOCTL requests,
+			 since the last time the statistics were cleared."
+	::= { cifsReqs 36 }
+
+	smbNTTransactQuerySecDescs OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB NT_TRANSACT_QUERY_SECURITY_DESC
+			 requests, since the last time the statistics 
+			 were cleared."
+	::= { cifsReqs 37 }
+
+	smbNTTransactSetSecDescs	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB NT_TRANSACT_SET_SECURITY_DESC
+			 requests, since the last time the statistics 
+			 were cleared."
+	::= { cifsReqs 38 }
+
+
+	smbTrans2CreateDirs	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB TRANS2_CREATE_DIRECTORY 
+			 requests, since the last time the statistics 
+			 were cleared."
+	::= { cifsReqs 39 }
+
+
+	smbNTCancelCNs		OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB NT_CANCEL requests against
+			 change notifications since the last time
+			 the statistics were cleared."
+	::= { cifsReqs 40 }
+
+	smbNTCancelOthers	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB NT_CANCEL requests against
+			 operations other than change notifications,
+			 since the last time the statistics
+			 were cleared."
+	::= { cifsReqs 41 }
+
+
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+	-- the cifsObsReqs group
+	-- (Obsolete SMB requests)
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+
+	obsSmbClosePrintFiles	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB CLOSE_PRINT_FILE requests,
+			 since the last time the statistics were cleared."
+	::= { cifsObsReqs 1 }
+
+	obsSmbCreates		OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB CREATE requests,
+			 since the last time the statistics were cleared."
+	::= { cifsObsReqs 2 }
+
+	obsSmbCreateDirs	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB CREATE_DIRECTORY requests,
+			 since the last time the statistics were cleared."
+	::= { cifsObsReqs 3 }
+
+	obsSmbCreateNews	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB CREATE_NEW requests,
+			 since the last time the statistics were cleared."
+	::= { cifsObsReqs 4 }
+
+	obsSmbLockAndReads	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB LOCK_AND_READ requests,
+			 since the last time the statistics were cleared."
+	::= { cifsObsReqs 5 }
+
+	obsSmbLockByteRanges	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB LOCK_BYTE_RANGE requests,
+			 since the last time the statistics were cleared."
+	::= { cifsObsReqs 6 }
+
+	obsSmbOpens		OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB OPEN requests,
+			 since the last time the statistics were cleared."
+	::= { cifsObsReqs 7 }
+
+	obsSmbOpenAndXs		OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB OPEN_ANDX requests,
+			 since the last time the statistics were cleared."
+	::= { cifsObsReqs 8 }
+
+	obsSmbProcessExits	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB PROCESS_EXIT requests,
+			 since the last time the statistics were cleared."
+	::= { cifsObsReqs 9 }
+
+	obsSmbQueryInfos	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB QUERY_INFORMATION requests,
+			 since the last time the statistics were cleared."
+	::= { cifsObsReqs 10 }
+
+	obsSmbQueryInfo2s	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB QUERY_INFORMATION2 requests,
+			 since the last time the statistics were cleared."
+	::= { cifsObsReqs 11 }
+
+	obsSmbReads		OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB READ requests,
+			 since the last time the statistics were cleared."
+	::= { cifsObsReqs 12 }
+
+	obsSmbReadMPXs		OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The SMB READ_MPX request is not supported,
+			 so this value should always be zero."
+	::= { cifsObsReqs 13 }
+
+	obsSmbReadRaws		OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB READ_RAW requests,
+			 since the last time the statistics were cleared."
+	::= { cifsObsReqs 14 }
+
+	obsSmbSearchs		OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB SEARCH requests,
+			 since the last time the statistics were cleared."
+	::= { cifsObsReqs 15 }
+
+	obsSmbSetInfos		OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB SET_INFORMATION requests,
+			 since the last time the statistics were cleared."
+	::= { cifsObsReqs 16 }
+
+	obsSmbSetInfo2s		OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB SET_INFORMATION2 requests,
+			 since the last time the statistics were cleared."
+	::= { cifsObsReqs 17 }
+
+	obsSmbQueryInfoDisks	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB QUERY_INFORMATION_DISK
+			 requests, since the last time the statistics 
+			 were cleared."
+	::= { cifsObsReqs 18 }
+
+	obsSmbTrans2Open2s	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB TRANS2_OPEN2 requests,
+			 since the last time the statistics were cleared."
+	::= { cifsObsReqs 19 }
+
+	obsSmbTreeConnects	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB TREE_CONNECT requests,
+			 since the last time the statistics were cleared."
+	::= { cifsObsReqs 20 }
+
+	obsSmbUnlockByteRanges	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB UNLOCK_BYTE_RANGE requests,
+			 since the last time the statistics were cleared."
+	::= { cifsObsReqs 21 }
+
+	obsSmbWrites		OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB WRITE requests,
+			 since the last time the statistics were cleared."
+	::= { cifsObsReqs 22 }
+
+	obsSmbWriteAndUnlocks	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB WRITE_AND_UNLOCK requests,
+			 since the last time the statistics were cleared."
+	::= { cifsObsReqs 23 }
+
+	obsSmbWriteAndCloses	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB WRITE_AND_CLOSE requests,
+			 since the last time the statistics were cleared."
+	::= { cifsObsReqs 24 }
+
+	obsSmbWriteMPXs		OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The SMB WRITE_MPX request is not supported,
+			 so this value should always be zero."
+	::= { cifsObsReqs 25 }
+
+	obsSmbWritePrintFiles	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The SMB WRITE_PRINT_FILE request is not supported,
+			 so this value should always be zero."
+	::= { cifsObsReqs 26 }
+
+	obsSmbWriteRaws		OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB WRITE_RAW requests,
+			 since the last time the statistics were cleared."
+	::= { cifsObsReqs 27 }
+
+
+
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+	-- the cifsPercent group
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+
+		-- this group contains statistics for the number of
+		-- calls received for each CIFS SMB request
+		-- as a percentage of total CIFS calls received,
+		-- since the last time the statistics were cleared
+
+	smbNegProtPct		OBJECT-TYPE
+	SYNTAX			INTEGER (0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB NEGOTIATE requests,
+			 as a percentage of total CIFS calls received,
+			 since the last time the statistics were cleared."
+	::= { cifsPercent 1 }
+
+	smbSessionSetupAndXPct	OBJECT-TYPE
+	SYNTAX			INTEGER (0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB SESSION_SETUP_ANDX requests,
+			 as a percentage of total CIFS calls received,
+			 since the last time the statistics were cleared."
+	::= { cifsPercent 2 }
+
+	smbLogoffAndXPct	OBJECT-TYPE
+	SYNTAX			INTEGER (0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB LOGOFF_ANDX requests,
+			 as a percentage of total CIFS calls received,
+			 since the last time the statistics were cleared."
+	::= { cifsPercent 3 }
+
+	smbTreeConnectAndXPct	OBJECT-TYPE
+	SYNTAX			INTEGER (0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB TREE_CONNECT_ANDX requests,
+			 as a percentage of total CIFS calls received,
+			 since the last time the statistics were cleared."
+	::= { cifsPercent 4 }
+
+	smbTreeDisconnectAndXPct OBJECT-TYPE
+	SYNTAX			INTEGER (0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB TREE_DISCONNECT_ANDX requests,
+			 as a percentage of total CIFS calls received,
+			 since the last time the statistics were cleared."
+	::= { cifsPercent 5 }
+
+	smbTrans2QueryFSInfoPct	OBJECT-TYPE
+	SYNTAX			INTEGER (0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB TRANS2_QUERY_FS_INFORMATION
+			 requests, as a percentage of total CIFS calls
+			 received, since the last time the statistics 
+			 were cleared."
+	::= { cifsPercent 6 }
+
+	smbEchoPct		OBJECT-TYPE
+	SYNTAX			INTEGER (0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB ECHO requests,
+			 as a percentage of total CIFS calls received,
+			 since the last time the statistics were cleared."
+	::= { cifsPercent 7 }
+
+	smbNTCancelPct		OBJECT-TYPE
+	SYNTAX			INTEGER (0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB NT_CANCEL requests,
+			 as a percentage of total CIFS calls received,
+			 since the last time the statistics were cleared."
+	::= { cifsPercent 8 }
+
+	smbCreateAndXPct	OBJECT-TYPE
+	SYNTAX			INTEGER (0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB NT_CREATE_ANDX requests,
+			 as a percentage of total CIFS calls received,
+			 since the last time the statistics were cleared."
+	::= { cifsPercent 9 }
+
+	smbTransactCreatePct	OBJECT-TYPE
+	SYNTAX			INTEGER (0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB NT_TRANSACT_CREATE requests,
+			 as a percentage of total CIFS calls received,
+			 since the last time the statistics were cleared."
+	::= { cifsPercent 10 }
+
+	smbCreateTemporaryPct	OBJECT-TYPE
+	SYNTAX			INTEGER (0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB CREATE_TEMPORARY requests,
+			 as a percentage of total CIFS calls received,
+			 since the last time the statistics were cleared."
+	::= { cifsPercent 11 }
+
+	smbReadAndXPct		OBJECT-TYPE
+	SYNTAX			INTEGER (0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB READ_ANDX requests,
+			 as a percentage of total CIFS calls received,
+			 since the last time the statistics were cleared."
+	::= { cifsPercent 12 }
+
+	smbWriteAndXPct		OBJECT-TYPE
+	SYNTAX			INTEGER (0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB WRITE_ANDX requests,
+			 as a percentage of total CIFS calls received,
+			 since the last time the statistics were cleared."
+	::= { cifsPercent 13 }
+
+	smbLockingAndXPct	OBJECT-TYPE
+	SYNTAX			INTEGER (0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB LOCKING_ANDX requests,
+			 as a percentage of total CIFS calls received,
+			 since the last time the statistics were cleared."
+	::= { cifsPercent 14 }
+
+	smbSeekPct		OBJECT-TYPE
+	SYNTAX			INTEGER (0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB SEEK requests,
+			 as a percentage of total CIFS calls received,
+			 since the last time the statistics were cleared."
+	::= { cifsPercent 15 }
+
+	smbFlushPct		OBJECT-TYPE
+	SYNTAX			INTEGER (0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB FLUSH requests,
+			 as a percentage of total CIFS calls received,
+			 since the last time the statistics were cleared."
+	::= { cifsPercent 16 }
+
+	smbClosePct		OBJECT-TYPE
+	SYNTAX			INTEGER (0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB CLOSE requests,
+			 as a percentage of total CIFS calls received,
+			 since the last time the statistics were cleared."
+	::= { cifsPercent 17 }
+
+	smbDeletePct		OBJECT-TYPE
+	SYNTAX			INTEGER (0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB DELETE requests,
+			 as a percentage of total CIFS calls received,
+			 since the last time the statistics were cleared."
+	::= { cifsPercent 18 }
+
+	smbRenamePct		OBJECT-TYPE
+	SYNTAX			INTEGER (0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB RENAME requests,
+			 as a percentage of total CIFS calls received,
+			 since the last time the statistics were cleared."
+	::= { cifsPercent 19 }
+
+	smbMovePct		OBJECT-TYPE
+	SYNTAX			INTEGER (0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB MOVE requests,
+			 as a percentage of total CIFS calls received,
+			 since the last time the statistics were cleared."
+	::= { cifsPercent 20 }
+
+	smbCopyPct		OBJECT-TYPE
+	SYNTAX			INTEGER (0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB COPY requests,
+			 as a percentage of total CIFS calls received,
+			 since the last time the statistics were cleared."
+	::= { cifsPercent 21 }
+
+	smbTrans2QueryPathInfoPct OBJECT-TYPE
+	SYNTAX			INTEGER (0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB TRANS2_QUERY_PATH_INFORMATION
+			 requests, as a percentage of total CIFS calls
+			 received, since the last time the statistics 
+			 were cleared."
+	::= { cifsPercent 22 }
+
+	smbTrans2QueryFileInfoPct OBJECT-TYPE
+	SYNTAX			INTEGER (0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB TRANS2_QUERY_FILE_INFORMATION
+			 requests, as a percentage of total CIFS calls
+			 received, since the last time the statistics 
+			 were cleared."
+	::= { cifsPercent 23 }
+
+	smbTrans2SetPathInfoPct	OBJECT-TYPE
+	SYNTAX			INTEGER (0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB TRANS2_SET_PATH_INFORMATION
+			 requests, as a percentage of total CIFS calls
+			 received, since the last time the statistics 
+			 were cleared."
+	::= { cifsPercent 24 }
+
+	smbTrans2SetFileInfoPct	OBJECT-TYPE
+	SYNTAX			INTEGER (0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB TRANS2_SET_FILE_INFORMATION
+			 requests, as a percentage of total CIFS calls
+			 received, since the last time the statistics 
+			 were cleared."
+	::= { cifsPercent 25 }
+
+	smbDeleteDirPct		OBJECT-TYPE
+	SYNTAX			INTEGER (0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB DELETE_DIRECTORY requests,
+			 as a percentage of total CIFS calls received,
+			 since the last time the statistics were cleared."
+	::= { cifsPercent 26 }
+
+	smbCheckDirPct		OBJECT-TYPE
+	SYNTAX			INTEGER (0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB CHECK_DIRECTORY requests,
+			 as a percentage of total CIFS calls received,
+			 since the last time the statistics were cleared."
+	::= { cifsPercent 27 }
+
+
+	smbTrans2FindFirst2Pct	OBJECT-TYPE
+	SYNTAX			INTEGER (0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB TRANS2_FIND_FIRST2 requests,
+			 as a percentage of total CIFS calls received,
+			 since the last time the statistics were cleared."
+	::= { cifsPercent 28 }
+
+	smbTrans2FindNext2Pct	OBJECT-TYPE
+	SYNTAX			INTEGER (0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB TRANS2_FIND_NEXT2 requests,
+			 as a percentage of total CIFS calls received,
+			 since the last time the statistics were cleared."
+	::= { cifsPercent 29 }
+
+	smbFindClose2Pct	OBJECT-TYPE
+	SYNTAX			INTEGER (0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB FIND_CLOSE2 requests,
+			 as a percentage of total CIFS calls received,
+			 since the last time the statistics were cleared."
+	::= { cifsPercent 30 }
+
+	smbNTTransactNotifyChgPct OBJECT-TYPE
+	SYNTAX			INTEGER (0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB NT_TRANSACT_NOTIFY_CHANGE
+			 requests, as a percentage of total CIFS calls
+			 received, since the last time the statistics 
+			 were cleared."
+	::= { cifsPercent 31 }
+
+	smbTrans2GetDFSReferralPct OBJECT-TYPE
+	SYNTAX			INTEGER (0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB TRANS2_GET_DFS_REFERRAL
+			 requests, as a percentage of total CIFS calls
+			 received, since the last time the statistics 
+			 were cleared."
+	::= { cifsPercent 32 }
+
+	smbTrans2ReportDFSIncPct OBJECT-TYPE
+	SYNTAX			INTEGER (0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB TRANS2_REPORT_DFS_INCONSISTENCY
+			 requests, as a percentage of total CIFS calls
+			 received, since the last time the statistics 
+			 were cleared."
+	::= { cifsPercent 33 }
+
+	smbOpenPrintFilePct	OBJECT-TYPE
+	SYNTAX			INTEGER (0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB OPEN_PRINT_FILE requests,
+			 as a percentage of total CIFS calls received,
+			 since the last time the statistics were cleared."
+	::= { cifsPercent 34 }
+
+	smbGetPrintQueuePct	OBJECT-TYPE
+	SYNTAX			INTEGER (0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB GET_PRINT_QUEUE requests,
+			 as a percentage of total CIFS calls received,
+			 since the last time the statistics were cleared."
+	::= { cifsPercent 35 }
+
+	smbNTTransactIoctlPct	OBJECT-TYPE
+	SYNTAX			INTEGER (0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB NT_TRANSACT_IOCTL requests,
+			 as a percentage of total CIFS calls received,
+			 since the last time the statistics were cleared."
+	::= { cifsPercent 36 }
+
+	smbNTTransactQuerySecDescPct OBJECT-TYPE
+	SYNTAX			INTEGER (0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB NT_TRANSACT_QUERY_SECURITY_DESC
+			 requests, as a percentage of total CIFS calls
+			 received, since the last time the statistics 
+			 were cleared."
+	::= { cifsPercent 37 }
+
+	smbNTTransactSetSecDescPct	OBJECT-TYPE
+	SYNTAX			INTEGER (0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB NT_TRANSACT_SET_SECURITY_DESC
+			 requests, as a percentage of total CIFS calls
+			 received, since the last time the statistics 
+			 were cleared."
+	::= { cifsPercent 38 }
+
+
+	smbTrans2CreateDirPct	OBJECT-TYPE
+	SYNTAX			INTEGER (0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB TRANS2_CREATE_DIRECTORY 
+			 requests, as a percentage of total CIFS calls
+			 received, since the last time the statistics 
+			 were cleared."
+	::= { cifsPercent 39 }
+
+
+	smbNTCancelCNPct	OBJECT-TYPE
+	SYNTAX			INTEGER (0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB NT_CANCEL requests against
+			 change notifications, as a percentage of
+			 total CIFS calls received, since the last
+			 time the statistics were cleared."
+	::= { cifsPercent 40 }
+
+	smbNTCancelOtherPct	OBJECT-TYPE
+	SYNTAX			INTEGER (0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB NT_CANCEL requests against
+			 calls other than change notifications, as 
+			 a percentage of total CIFS calls received, 
+			 since the last time the statistics were 
+			 cleared."
+	::= { cifsPercent 41 }
+
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+	-- the obsPct group
+	-- (Obsolete SMB requests)
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+
+	obsSmbClosePrintFilePct	OBJECT-TYPE
+	SYNTAX			INTEGER (0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB CLOSE_PRINT_FILE requests,
+			 as a percentage of total CIFS calls received,
+			 since the last time the statistics were cleared."
+	::= { cifsObsPercent 1 }
+
+	obsSmbCreatePct		OBJECT-TYPE
+	SYNTAX			INTEGER (0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB CREATE requests,
+			 as a percentage of total CIFS calls received,
+			 since the last time the statistics were cleared."
+	::= { cifsObsPercent 2 }
+
+	obsSmbCreateDirPct	OBJECT-TYPE
+	SYNTAX			INTEGER (0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB CREATE_DIRECTORY requests,
+			 as a percentage of total CIFS calls received,
+			 since the last time the statistics were cleared."
+	::= { cifsObsPercent 3 }
+
+	obsSmbCreateNewPct	OBJECT-TYPE
+	SYNTAX			INTEGER (0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB CREATE_NEW requests,
+			 as a percentage of total CIFS calls received,
+			 since the last time the statistics were cleared."
+	::= { cifsObsPercent 4 }
+
+	obsSmbLockAndReadPct	OBJECT-TYPE
+	SYNTAX			INTEGER (0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB LOCK_AND_READ requests,
+			 as a percentage of total CIFS calls received,
+			 since the last time the statistics were cleared."
+	::= { cifsObsPercent 5 }
+
+	obsSmbLockByteRangePct	OBJECT-TYPE
+	SYNTAX			INTEGER (0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB LOCK_BYTE_RANGE requests,
+			 as a percentage of total CIFS calls received,
+			 since the last time the statistics were cleared."
+	::= { cifsObsPercent 6 }
+
+	obsSmbOpenPct		OBJECT-TYPE
+	SYNTAX			INTEGER (0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB OPEN requests,
+			 as a percentage of total CIFS calls received,
+			 since the last time the statistics were cleared."
+	::= { cifsObsPercent 7 }
+
+	obsSmbOpenAndXPct	OBJECT-TYPE
+	SYNTAX			INTEGER (0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB OPEN_ANDX requests,
+			 as a percentage of total CIFS calls received,
+			 since the last time the statistics were cleared."
+	::= { cifsObsPercent 8 }
+
+	obsSmbProcessExitPct	OBJECT-TYPE
+	SYNTAX			INTEGER (0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB PROCESS_EXIT requests,
+			 as a percentage of total CIFS calls received,
+			 since the last time the statistics were cleared."
+	::= { cifsObsPercent 9 }
+
+	obsSmbQueryInfoPct	OBJECT-TYPE
+	SYNTAX			INTEGER (0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB QUERY_INFORMATION requests,
+			 as a percentage of total CIFS calls received,
+			 since the last time the statistics were cleared."
+	::= { cifsObsPercent 10 }
+
+	obsSmbQueryInfo2Pct	OBJECT-TYPE
+	SYNTAX			INTEGER (0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB QUERY_INFORMATION2 requests,
+			 as a percentage of total CIFS calls received,
+			 since the last time the statistics were cleared."
+	::= { cifsObsPercent 11 }
+
+	obsSmbReadPct		OBJECT-TYPE
+	SYNTAX			INTEGER (0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB READ requests,
+			 as a percentage of total CIFS calls received,
+			 since the last time the statistics were cleared."
+	::= { cifsObsPercent 12 }
+
+	obsSmbReadMPXPct	OBJECT-TYPE
+	SYNTAX			INTEGER (0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB READ_MPX requests,
+			 as a percentage of total CIFS calls received,
+			 since the last time the statistics were cleared."
+	::= { cifsObsPercent 13 }
+
+	obsSmbReadRawPct	OBJECT-TYPE
+	SYNTAX			INTEGER (0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB READ_RAW requests,
+			 as a percentage of total CIFS calls received,
+			 since the last time the statistics were cleared."
+	::= { cifsObsPercent 14 }
+
+	obsSmbSearchPct		OBJECT-TYPE
+	SYNTAX			INTEGER (0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB SEARCH requests,
+			 as a percentage of total CIFS calls received,
+			 since the last time the statistics were cleared."
+	::= { cifsObsPercent 15 }
+
+	obsSmbSetInfoPct	OBJECT-TYPE
+	SYNTAX			INTEGER (0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB SET_INFORMATION requests,
+			 as a percentage of total CIFS calls received,
+			 since the last time the statistics were cleared."
+	::= { cifsObsPercent 16 }
+
+	obsSmbSetInfo2Pct	OBJECT-TYPE
+	SYNTAX			INTEGER (0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB SET_INFORMATION2 requests,
+			 as a percentage of total CIFS calls received,
+			 since the last time the statistics were cleared."
+	::= { cifsObsPercent 17 }
+
+	obsSmbQueryInfoDiskPct	OBJECT-TYPE
+	SYNTAX			INTEGER (0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB QUERY_INFORMATION_DISK
+			 requests, as a percentage of total CIFS calls
+			 received, since the last time the statistics 
+			 were cleared."
+	::= { cifsObsPercent 18 }
+
+	obsSmbTrans2Open2Pct	OBJECT-TYPE
+	SYNTAX			INTEGER (0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB TRANS2_OPEN2 requests,
+			 as a percentage of total CIFS calls received,
+			 since the last time the statistics were cleared."
+	::= { cifsObsPercent 19 }
+
+	obsSmbTreeConnectPct	OBJECT-TYPE
+	SYNTAX			INTEGER (0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB TREE_CONNECT requests,
+			 as a percentage of total CIFS calls received,
+			 since the last time the statistics were cleared."
+	::= { cifsObsPercent 20 }
+
+	obsSmbUnlockByteRangePct OBJECT-TYPE
+	SYNTAX			INTEGER (0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB UNLOCK_BYTE_RANGE requests,
+			 as a percentage of total CIFS calls received,
+			 since the last time the statistics were cleared."
+	::= { cifsObsPercent 21 }
+
+	obsSmbWritePct		OBJECT-TYPE
+	SYNTAX			INTEGER (0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB WRITE requests,
+			 as a percentage of total CIFS calls received,
+			 since the last time the statistics were cleared."
+	::= { cifsObsPercent 22 }
+
+	obsSmbWriteAndUnlockPct	OBJECT-TYPE
+	SYNTAX			INTEGER (0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB WRITE_AND_UNLOCK requests,
+			 as a percentage of total CIFS calls received,
+			 since the last time the statistics were cleared."
+	::= { cifsObsPercent 23 }
+
+	obsSmbWriteAndClosePct	OBJECT-TYPE
+	SYNTAX			INTEGER (0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB WRITE_AND_CLOSE requests,
+			 as a percentage of total CIFS calls received,
+			 since the last time the statistics were cleared."
+	::= { cifsObsPercent 24 }
+
+	obsSmbWriteMPXPct	OBJECT-TYPE
+	SYNTAX			INTEGER (0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB WRITE_MPX requests,
+			 as a percentage of total CIFS calls received,
+			 since the last time the statistics were cleared."
+	::= { cifsObsPercent 25 }
+
+	obsSmbWritePrintFilePct	OBJECT-TYPE
+	SYNTAX			INTEGER (0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB WRITE_PRINT_FILE requests,
+			 as a percentage of total CIFS calls received,
+			 since the last time the statistics were cleared."
+	::= { cifsObsPercent 26 }
+
+	obsSmbWriteRawPct	OBJECT-TYPE
+	SYNTAX			INTEGER (0..100)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of SMB WRITE_RAW requests,
+			 as a percentage of total CIFS calls received,
+			 since the last time the statistics were cleared."
+	::= { cifsObsPercent 27 }
+
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
+	-- the cifsMisc group
+	-- These statistics are primarily of interest to
+	-- NetApp developers.
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
+
+	cifsCancelLocks		OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Undocumented"
+	::= { cifsMisc 1 }
+	
+	cifsWaitLocks		OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Undocumented"
+	::= { cifsMisc 2 }
+	
+	cifsCopyToAligns	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Undocumented"
+	::= { cifsMisc 3 }
+	
+	cifsAlignedSmalls	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Undocumented"
+	::= { cifsMisc 4 }
+	
+	cifsAlignedLarges	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Undocumented"
+	::= { cifsMisc 5 }
+	
+	cifsAlignedSmallRels	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Undocumented"
+	::= { cifsMisc 6 }
+	
+	cifsAlignedLargeRels	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Undocumented"
+	::= { cifsMisc 7 }
+	
+	cifsMbufWaits		OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Undocumented"
+	::= { cifsMisc 8 }
+	
+	cifsNbtWaits		OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Undocumented"
+	::= { cifsMisc 9 }
+	
+	cifsCwaWaits		OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Undocumented"
+	::= { cifsMisc 10 }
+	
+	cifsMultipleVCs		OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Undocumented"
+	::= { cifsMisc 11 }
+	
+	cifsPDCUpcalls		OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Undocumented"
+	::= { cifsMisc 12 }
+	
+	cifsQueuedWriteRaws	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Undocumented"
+	::= { cifsMisc 13 }
+	
+	cifsNBTDisconnects	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Undocumented"
+	::= { cifsMisc 14 }
+	
+	cifsSMBDisconnects	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Undocumented"
+	::= { cifsMisc 15 }
+	
+	cifsDupDisconnects	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Undocumented"
+	::= { cifsMisc 16 }
+	
+	cifsOpLkBatchToL2s	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Undocumented"
+	::= { cifsMisc 17 }
+	
+	cifsOpLkBatchToNones	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Undocumented"
+	::= { cifsMisc 18 }
+	
+	cifsOpLkL2ToNones	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Undocumented"
+	::= { cifsMisc 19 }
+	
+	cifsOpLkNoBreakAcks	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Undocumented"
+	::= { cifsMisc 20 }
+	
+	cifsOpLkIgnoredAcks	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Undocumented"
+	::= { cifsMisc 21 }
+	
+	cifsOpLkMultiWaiters	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Undocumented"
+	::= { cifsMisc 22 }
+	
+	cifsSharingErrorRetries	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Undocumented"
+	::= { cifsMisc 23 }
+	
+	cifsOpLkWaiterTimedOuts	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Undocumented"
+	::= { cifsMisc 24 }
+	
+	cifsOpLkDelayedBreaks	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Undocumented"
+	::= { cifsMisc 25 }
+	
+	cifsOpLkEarlyNFSs	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Undocumented"
+	::= { cifsMisc 26 }
+	
+	cifsOpLkNFSWaiteds	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Undocumented"
+	::= { cifsMisc 27 }
+	
+	cifsMaxNFSBkWaiterCount	OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Undocumented"
+	::= { cifsMisc 28 }
+	
+	cifsClearTextPasswd	OBJECT-TYPE
+	SYNTAX			INTEGER {
+			    		no(1),
+			                yes(2)
+				}
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"This indicates whether the cifs clients are 
+				 using clear text passwords when authenticating 
+				 with the filer. If cifsDomainJoined is false and
+				 this variable is also false, then the filer is
+				 using NT Security from a local user list."
+	::= { cifsMisc 29 }
+
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+	-- the netcache group --
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+
+	ncOptions	OBJECT IDENTIFIER ::= { netcache 1 }
+
+	ncInfo		OBJECT IDENTIFIER ::= { netcache 2 }
+
+	ncStats		OBJECT IDENTIFIER ::= { netcache 3 }
+
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+	-- the netcache options group
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+
+	ncIsEnabled	OBJECT-TYPE
+	SYNTAX		INTEGER {
+					false(1),
+					true(2)
+				}
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"Whether Netcache is enabled on this system."
+	::= { ncOptions 1 }
+
+	ncIsLicensed	OBJECT-TYPE
+	SYNTAX		INTEGER {
+					false(1),
+					true(2)
+				}
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"Whether Netcache is licensed on this system."
+	::= { ncOptions 2 }
+
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+	-- the dns options group
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+
+	ncDnsOptions		OBJECT IDENTIFIER ::= { ncOptions 3 }
+
+	ncDnsIsEnabled	OBJECT-TYPE
+	SYNTAX		INTEGER {
+					false(1),
+					true(2)
+				}
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"Whether the Domain Name System (DNS)
+			is enabled on this system."
+	::= { ncDnsOptions 1 }
+
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+	-- the http options group
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+
+	ncHttpOptions		OBJECT IDENTIFIER ::= { ncOptions 4 }
+
+	ncHttpIsEnabled	OBJECT-TYPE
+	SYNTAX		INTEGER {
+					false(1),
+					true(2)
+				}
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"Whether HTTP is enabled on this system."
+	::= { ncHttpOptions 1 }
+
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+	-- the nntp options group
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+
+	ncNntpOptions		OBJECT IDENTIFIER ::= { ncOptions 5 }
+
+	ncNntpIsEnabled	OBJECT-TYPE
+	SYNTAX		INTEGER {
+					false(1),
+					true(2)
+				}
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"Whether NNTP is enabled on this system."
+	::= { ncNntpOptions 1 }
+
+	ncNntpIsLicensed	OBJECT-TYPE
+	SYNTAX		INTEGER {
+					false(1),
+					true(2)
+				}
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"Whether NNTP is licensed on this system."
+	::= { ncNntpOptions 2 }
+
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+	-- the streaming options group
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+
+	ncStreamingOptions	OBJECT IDENTIFIER ::= { ncOptions 6 }
+
+	ncStreamingMmsIsEnabled	OBJECT-TYPE
+	SYNTAX		INTEGER {
+					false(1),
+					true(2)
+				}
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"Whether Microsoft Media Services (MMS)
+			is enabled on this system."
+	::= { ncStreamingOptions 1 }
+
+	ncStreamingMmsIsLicensed	OBJECT-TYPE
+	SYNTAX		INTEGER {
+					false(1),
+					true(2)
+				}
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"Whether Microsoft Windows Media Service (MMS)
+			is licensed on this system."
+	::= { ncStreamingOptions 2 }
+
+	ncStreamingMmsProIsLicensed	OBJECT-TYPE
+	SYNTAX		INTEGER {
+					false(1),
+					true(2)
+				}
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"Whether Microsoft Windows Media Service Pro (MMS)
+			is licensed on this system."
+	::= { ncStreamingOptions 3 }
+
+	ncStreamingRtspIsEnabled	OBJECT-TYPE
+	SYNTAX		INTEGER {
+					false(1),
+					true(2)
+				}
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"Whether the Real Time Streaming Protocol (RTSP)
+			is enabled on this system."
+	::= { ncStreamingOptions 4 }
+
+	ncStreamingQuickTimeIsLicensed	OBJECT-TYPE
+	SYNTAX		INTEGER {
+					false(1),
+					true(2)
+				}
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"Whether QuickTime is licensed on this system."
+	::= { ncStreamingOptions 5 }
+
+	ncStreamingRealIsLicensed	OBJECT-TYPE
+	SYNTAX		INTEGER {
+					false(1),
+					true(2)
+				}
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"Whether Real Media streaming is licensed on 
+			this system."
+	::= { ncStreamingOptions 6 }
+
+	ncStreamingMmsUltraIsLicensed	OBJECT-TYPE
+	SYNTAX		INTEGER {
+					false(1),
+					true(2)
+				}
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"Whether Microsoft Windows Media Service Ultra (MMS)
+			is licensed on this system."
+	::= { ncStreamingOptions 7 }
+
+	ncStreamingRealProIsLicensed	OBJECT-TYPE
+	SYNTAX		INTEGER {
+					false(1),
+					true(2)
+				}
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"Whether Real Media Pro streaming is licensed on 
+			this system."
+	::= { ncStreamingOptions 8 }
+
+	ncStreamingRealUltraIsLicensed	OBJECT-TYPE
+	SYNTAX		INTEGER {
+					false(1),
+					true(2)
+				}
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"Whether Real Media Ultra streaming is licensed on 
+			this system."
+	::= { ncStreamingOptions 9 }
+
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+	-- the icap options group
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+
+	ncIcapOptions		OBJECT IDENTIFIER ::= { ncOptions 7 }
+
+	ncIcapIsEnabled	OBJECT-TYPE
+	SYNTAX		INTEGER {
+					false(1),
+					true(2)
+				}
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"Whether ICAP v0.95 is enabled on this system."
+	::= { ncIcapOptions 1 }
+
+	ncIcapIsLicensed	OBJECT-TYPE
+	SYNTAX		INTEGER {
+					false(1),
+					true(2)
+				}
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"Whether ICAP is licensed on this system."
+	::= { ncIcapOptions 2 }
+
+	ncIcapv1IsEnabled	OBJECT-TYPE
+	SYNTAX		INTEGER {
+					false(1),
+					true(2)
+				}
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"Whether ICAP v1.0 is enabled on this system."
+	::= { ncIcapOptions 3 }
+
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+	-- the grm options group
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+
+	ncGrmOptions		OBJECT IDENTIFIER ::= { ncOptions 8 }
+	
+	ncGrmServerOptions	OBJECT IDENTIFIER ::= { ncGrmOptions 1 }
+
+	ncGrmAgentOptions	OBJECT IDENTIFIER ::= { ncGrmOptions 2 }
+
+	ncGrmServerIsEnabled	OBJECT-TYPE
+	SYNTAX		INTEGER {
+					false(1),
+					true(2)
+				}
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"Whether the Global Request Manager (GRM) Server
+			is enabled on this system."
+	::= { ncGrmServerOptions 1 }
+
+	ncGrmServerIsLicensed	OBJECT-TYPE
+	SYNTAX		INTEGER {
+					false(1),
+					true(2)
+				}
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"Whether the Global Request Manager (GRM) Server
+			is licensed on this system."
+	::= { ncGrmServerOptions 2 }
+
+	ncGrmAgentIsEnabled	OBJECT-TYPE
+	SYNTAX		INTEGER {
+					false(1),
+					true(2)
+				}
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"Whether the Global Request Manager (GRM) Agent
+			enabled on this system."
+	::= { ncGrmAgentOptions 1 }
+
+	ncGrmAgentIsLicensed	OBJECT-TYPE
+	SYNTAX		INTEGER {
+					false(1),
+					true(2)
+				}
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"Whether the Global Request Manager (GRM) Agent
+			is licensed on this system."
+	::= { ncGrmAgentOptions 2 }
+
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+	-- the content director options group
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+
+	ncCdOptions	OBJECT IDENTIFIER ::= { ncOptions 9 }
+
+	ncCdIsEnabled	OBJECT-TYPE
+	SYNTAX		INTEGER {
+					false(1),
+					true(2)
+				}
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"Whether Content Director is enabled on this system."
+	::= { ncCdOptions 1 }
+
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+	-- the https options group
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+
+	ncHttpsProxyOptions		OBJECT IDENTIFIER ::= { ncOptions 10 }
+
+	ncHttpsProxyIsEnabled	OBJECT-TYPE
+	SYNTAX		INTEGER {
+					false(1),
+					true(2)
+				}
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"Whether HTTPS is enabled on this system."
+	::= { ncHttpsProxyOptions 1 }
+
+	ncHttpsProxyIsLicensed	OBJECT-TYPE
+	SYNTAX		INTEGER {
+					false(1),
+					true(2)
+				}
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"Whether HTTPS is licensed on this system."
+	::= { ncHttpsProxyOptions 2 }
+
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+	-- the cms options group
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+	ncCmsOptions		OBJECT IDENTIFIER ::= { ncOptions 11 }
+
+	ncCmsIsEnabled	OBJECT-TYPE
+	SYNTAX		INTEGER {
+					false(1),
+					true(2)
+				}
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"Whether CMS is enabled on this system."
+	::= { ncCmsOptions 1 }
+
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+	-- the netcache info group
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+
+ 	ncVersion		OBJECT-TYPE
+	SYNTAX			DisplayString
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The Netcache version string."
+	::= { ncInfo 1 }
+
+ 	ncAdminPort		OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Netcache Admin Port number - this
+			 is the first in the list of admin
+			 ports configured for the NetCache."
+	::= { ncInfo 2 }
+
+
+	accelmonitor	OBJECT IDENTIFIER ::= { ncInfo 3 }
+
+	-- the acceleration monitor group
+	-- Implementation of the Acceleration Monitor (accelmonitor.
+
+	amNumber OBJECT-TYPE
+	    SYNTAX  INTEGER
+	    ACCESS  read-only
+	    STATUS  mandatory
+	    DESCRIPTION
+		"The number of entries in the acceleration monitor table."
+	    ::= { accelmonitor 1 }
+
+	amMonitor OBJECT-TYPE
+	    SYNTAX  INTEGER {
+			togglea(1),
+			toggleb(2)
+	    }
+	    ACCESS  read-only
+	    STATUS  mandatory
+	    DESCRIPTION
+		"Variable for user defined SNMP traps to monitor whether			there has been a status change of any of the acceleration 
+		servers that netcache is probing."
+	    ::= { accelmonitor 2 }
+
+	amMonitorString OBJECT-TYPE
+	    SYNTAX  DisplayString
+	    ACCESS  read-only
+	    STATUS  mandatory
+	    DESCRIPTION
+		"Used in conjunction with amMonitor. This returns a string
+		in format of: 'IP:port status' which reports the status
+		of all the servers netcache is accelerating as of last
+		status change."
+	    ::= { accelmonitor 3 }
+
+	-- accelmonitor table
+
+	-- the Acceleration Monitor table contains information of the
+	-- the acceleration server, port that we are monitoring and its
+	-- status.
+
+	amTable OBJECT-TYPE
+	    SYNTAX  SEQUENCE OF AmEntry
+	    ACCESS  not-accessible
+	    STATUS  mandatory
+	    DESCRIPTION
+		     "A list of acceleration server and port entries. The
+		     number of entries is given by the value of amNumber."
+	    ::= { accelmonitor 4 }
+
+	amEntry OBJECT-TYPE
+	    SYNTAX  AmEntry
+	    ACCESS  not-accessible
+	    STATUS  mandatory
+	    DESCRIPTION
+		    "An acceleration monitor entry contains: the server
+		    IP address, server port and the status."
+	    INDEX   { amIndex }
+	    ::= { amTable 1 }
+
+	AmEntry ::=
+	    SEQUENCE {
+		amIndex
+		    INTEGER,
+		amAddress
+		    IpAddress,
+		amPort
+		    INTEGER (0..65535),
+		amStatus
+		    INTEGER
+	    }
+
+	amIndex OBJECT-TYPE
+	    SYNTAX  INTEGER (1..2147483647)
+	    ACCESS  read-only
+	    STATUS  mandatory
+	    DESCRIPTION
+		    " A unique value for each entry in the acceleration monitor
+		    table."
+	    ::= { amEntry 1 }
+
+	amAddress OBJECT-TYPE
+	    SYNTAX  IpAddress
+	    ACCESS  read-only
+	    STATUS  mandatory
+	    DESCRIPTION
+		    "The IP address of the acceleration server the NetCache
+		    is monitoring."
+	    ::= { amEntry 2 }
+
+	amPort OBJECT-TYPE
+	    SYNTAX  INTEGER (0..65535)
+	    ACCESS  read-only
+	    STATUS  mandatory
+	    DESCRIPTION
+		   "The corresponding port on the server that NetCache is
+		   monitoring."
+	    ::= { amEntry 3 }
+
+	amStatus OBJECT-TYPE
+	    SYNTAX  INTEGER {
+			active(1),
+			up(2),
+			down(3),
+			inactive(4)
+		    }
+	    ACCESS  read-only
+	    STATUS  mandatory
+	    DESCRIPTION
+		    "The status of the service running on the server.
+		    active -  in queue but no probes done yet.
+		    up - the server is reachable and responding to probes.
+		    down - the server is unreachable.
+		    inactive - monitoring is disabled."
+	    ::= { amEntry 4 }
+	
+ 	ncLocalConfigChanged	OBJECT-TYPE
+	SYNTAX		INTEGER {
+					false(1),
+					true(2)
+				}
+	ACCESS				read-only
+	STATUS				mandatory
+	DESCRIPTION
+			"Whether the local configuration file on NetCache
+			was changed without using DFM configuration management."
+	::= { ncInfo 4 }
+
+ 	ncLocalConfigVersion	OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The current cache configuration's version."
+	::= { ncInfo 5 }
+
+	grmmonitor	OBJECT IDENTIFIER ::= { ncInfo 6 }
+
+	-- the GRM monitor group
+	-- Implementation of the GRM agent monitor
+
+	grmMonitor OBJECT-TYPE
+	    SYNTAX  INTEGER {
+			togglea(1),
+			toggleb(2)
+	    }
+	    ACCESS  read-only
+	    STATUS  mandatory
+	    DESCRIPTION
+		"Variable for user defined SNMP traps to monitor whether			there has been a status change of any of the GRM 
+		agents reporting to this GRM server."
+	    ::= { grmmonitor 1 }
+
+	grmMonitorString OBJECT-TYPE
+	    SYNTAX  DisplayString
+	    ACCESS  read-only
+	    STATUS  mandatory
+	    DESCRIPTION
+		"Used in conjunction with grmMonitor. This returns a string
+		in format of: 'IP status.' which reports the status
+		of all the GRM agents reporting to this GRM server as of last
+		status change."
+	    ::= { grmmonitor 2 }
+
+	takeoverinfo	OBJECT IDENTIFIER ::= { ncInfo 7 }
+
+	-- the takeover information group
+	-- information same as status.takeover.addrs and 
+	-- status.takeover.mode and status.takeover.partner_status
+
+	takeoverAddrs OBJECT-TYPE
+	    SYNTAX  DisplayString 
+	    ACCESS  read-only
+	    STATUS  mandatory
+	    DESCRIPTION
+		"Indicates the list of interfaces and their corresponding IP
+		 addresses of the partner NetCache that this appliance has taken 		 over." 
+	    ::= { takeoverinfo 1 }
+
+	takeoverMode OBJECT-TYPE
+	    SYNTAX  INTEGER {
+			normal(1),
+			takingover(2),
+			takenover(3),
+			giveback(4)
+	    } 
+	    ACCESS  read-only
+	    STATUS  mandatory
+	    DESCRIPTION
+		"Indicates the current takeover mode of this appliance."
+	    ::= { takeoverinfo 2 }
+
+	takeoverStatus OBJECT-TYPE
+	    SYNTAX  INTEGER {
+			up(1),
+			unknown(2),
+			failed(3)
+	    } 
+	    ACCESS  read-only
+	    STATUS  mandatory
+	    DESCRIPTION
+		"Indicates the current status of the takeover partner of 
+		 this appliance. up(1) indicates that the takeover partner is 
+		 reachable. unknown(2) indicates that an unknown error occured.
+		 failed(3) indicates that the partner has failed, takeoverAddrs
+		 indicates the partner's IP address this appliance has taken
+		 over."
+	    ::= { takeoverinfo 3 }
+
+
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+	-- the netcache stats group --
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+
+ 	ncObjectsStored		OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The total number of objects stored currently."
+	::= { ncStats 1 }
+
+	ncBytesToClients  OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Total bytes sent to clients"
+	::= { ncStats 2 }
+
+	ncBytesFromClients  OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Total bytes received from clients"
+	::= { ncStats 3 }
+
+	ncBytesToServers  OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Total bytes sent to servers"
+	::= { ncStats 4 }
+
+	ncBytesFromServers  OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Total bytes received from servers"
+	::= { ncStats 5 }    
+
+	ncHttp		OBJECT IDENTIFIER ::= { ncStats 6 }
+
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+	-- the http stats group
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+
+ 	ncHttpTotalRequests	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Total HTTP requests so far"
+	::= { ncHttp 1 }
+
+ 	ncHttpHitRequests	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"HTTP requests that resulted in hits so far"
+	::= { ncHttp 2 }
+
+ 	ncHttpMissRequests	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"HTTP requests that resulted in misses so far"
+	::= { ncHttp 3 }
+
+ 	ncHttpServConns		OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Number of currently open TCP/IP connections to HTTP servers (active and idle)"
+	::= { ncHttp 4 }
+
+ 	ncHttpCliConns		OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Number of currently open TCP/IP connections to HTTP clients (active and idle)"
+	::= { ncHttp 5 }
+
+ 	ncHttpBWSavings		OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Bandwidth savings for HTTP requests"
+	::= { ncHttp 6 }
+
+ 	ncHttpObjHitrate	OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Object Hitrate HTTP requests" 
+	::= { ncHttp 7 }
+
+ 	ncHttpRespTimePerByte	OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Response time in milliseconds per byte for HTTP requests."
+	::= { ncHttp 8 }
+
+ 	ncHttpAvgRespTime	OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Average response time in milliseconds for all HTTP requests."
+	::= { ncHttp 9 }
+
+ 	ncHttpAvgHitRespTime	OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Average response time in milliseconds for HTTP hit requests."
+	::= { ncHttp 10 }
+
+ 	ncHttpAvgMissRespTime	OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Average response time in milliseconds for HTTP miss requests."
+	::= { ncHttp 11 }
+
+ 	ncHttpInstAvgRespTime	OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Average response time in milliseconds for all HTTP requests during the last 60 seconds."
+	::= { ncHttp 12 }
+
+
+ 	ncHttpInstAvgHitRespTime	OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Average response time in milliseconds for HTTP hit requests during the last 60 seconds."
+	::= { ncHttp 13 }
+
+ 	ncHttpInstAvgMissRespTime	OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Average response time in milliseconds for HTTP miss requests during the last 60 seconds."
+	::= { ncHttp 14 }
+
+	ncHttpTotalRespTime  	OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Total fetch time in milliseconds for HTTP requests"
+	::= { ncHttp 15 }
+
+	ncHttpTotalHitRespTime  OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Total fetch time in milliseconds for HTTP HIT requests"
+	::= { ncHttp 16 }
+
+	ncHttpTotalMissRespTime  OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Total fetch time in milliseconds for HTTP MISS requests"
+	::= { ncHttp 17 }
+
+	ncHttpBytesToClients  OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Total HTTP bytes sent to clients"
+	::= { ncHttp 18 }
+
+	ncHttpBytesFromClients  OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Total HTTP bytes received from clients"
+	::= { ncHttp 19 }
+
+	ncHttpBytesToServers  OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Total HTTP bytes sent to servers"
+	::= { ncHttp 20 }
+
+	ncHttpBytesFromServers  OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Total HTTP bytes received from servers"
+	::= { ncHttp 21 }
+
+	ncHttpHighTotalRespTimes  	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Total fetch time in milliseconds for HTTP requests.
+			This object returns the most significant 32 bits 
+			of the 64 bit unsigned integer."
+	::= { ncHttp 22 }
+
+	ncHttpLowTotalRespTimes  	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Total fetch time in milliseconds for HTTP requests.
+			This object returns the least significant 32 bits 
+			of the 64 bit unsigned integer."
+	::= { ncHttp 23 }
+
+	ncHttpHighTotalHitRespTimes  OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Total fetch time in milliseconds for HTTP HIT requests.
+			This object returns the most significant 32 bits 
+			of the 64 bit unsigned integer."
+	::= { ncHttp 24 }
+
+	ncHttpLowTotalHitRespTimes  OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Total fetch time in milliseconds for HTTP HIT requests.
+			This object returns the least significant 32 bits 
+			of the 64 bit unsigned integer."
+	::= { ncHttp 25 }
+
+	ncHttpHighTotalMissRespTimes  OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Total fetch time in milliseconds for HTTP MISS requests.
+			This object returns the most significant 32 bits 
+			of the 64 bit unsigned integer."
+	::= { ncHttp 26 }
+
+	ncHttpLowTotalMissRespTimes  OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Total fetch time in milliseconds for HTTP MISS requests.
+			This object returns the least significant 32 bits 
+			of the 64 bit unsigned integer."
+	::= { ncHttp 27 }
+
+ 	ncHttpReqRate	        OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Request Rate for HTTP requests"
+	::= { ncHttp 28 }
+    
+ 	ncHttpObjHitRateLast1Min	OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"HTTP object hit rate in the last 1 minute."
+	::= { ncHttp 29 }
+
+ 	ncHttpObjHitRateLast5Min	OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"HTTP object hit rate in the last 5 minutes."
+	::= { ncHttp 30 }
+
+ 	ncHttpByteHitRateLast1Min	OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"HTTP byte hit rate in the last 1 minute."
+	::= { ncHttp 31 }
+
+ 	ncHttpByteHitRateLast5Min	OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"HTTP byte hit rate in the last 5 minutes."
+	::= { ncHttp 32 }
+
+ 	ncHttpBWSavingsLast1Min		OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Bandwidth savings for HTTP requests in the last
+			 1 minute"
+	::= { ncHttp 33 }
+
+	ncHttpBWSavingsLast5Min	OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Bandwidth savings for HTTP requests in the last
+			 5 minutes"
+	::= { ncHttp 34 }
+
+ 	ncHttpActiveServConns	OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Number of currently active TCP/IP connections to HTTP servers"
+	::= { ncHttp 35 }
+
+ 	ncHttpActiveCliConns	OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Number of currently active TCP/IP connections to HTTP clients"
+	::= { ncHttp 36 }
+
+	ncHttpAccelTable	OBJECT-TYPE
+	SYNTAX			SEQUENCE OF NcHttpAccelEntry
+	ACCESS 			not-accessible
+	STATUS 			mandatory
+	DESCRIPTION
+		 	"Number of kilobytes sent to and recieved from the client side
+			per acceleration rule"
+
+ 	::= { ncHttp 37 }
+
+	ncHttpAccelEntry 	OBJECT-TYPE
+	SYNTAX 			NcHttpAccelEntry
+ 	ACCESS			not-accessible
+ 	STATUS 			mandatory
+ 	DESCRIPTION
+ 			"Each entry contains the number of kilobytes sent and
+ 			received to/from the clients side per acceleration 
+			rule"
+
+	INDEX	 { ncHttpAccelIndex }
+ 	::= { ncHttpAccelTable 1 }
+
+	NcHttpAccelEntry ::=
+ 	SEQUENCE {
+ 		ncHttpAccelIndex		INTEGER,
+ 		ncHttpAccelKbytesFromClient 	Counter,
+ 		ncHttpAccelKbytesToClient	Counter,
+		ncHttpAccelHits			Counter
+ 		}
+
+ 	ncHttpAccelIndex	OBJECT-TYPE
+ 	SYNTAX			INTEGER (1..513)
+ 	ACCESS			read-only
+ 	STATUS			mandatory
+ 	DESCRIPTION
+ 			"A unique value for each entry in the http acceleration
+			 stats table"
+ 	::= { ncHttpAccelEntry 1 }
+
+	ncHttpAccelKbytesFromClient OBJECT-TYPE
+ 	SYNTAX			Counter
+ 	ACCESS 			read-only
+ 	STATUS			mandatory
+ 	DESCRIPTION
+ 			"The total number of kilobytes received from the client
+ 			for this acceleration rule"
+ 	::= { ncHttpAccelEntry 2 }
+
+ 	ncHttpAccelKbytesToClient OBJECT-TYPE
+ 	SYNTAX 			Counter
+ 	ACCESS			read-only
+ 	STATUS			mandatory
+ 	DESCRIPTION
+			"The total number of kilobytes sent to the client for
+ 			this acceleration rule"
+	::= { ncHttpAccelEntry 3 }
+
+	ncHttpAccelHits		OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION		
+			" The number of times this acceleration rule has been hit"
+	::= { ncHttpAccelEntry 4 }
+
+	ncHttpsAccelTable	OBJECT-TYPE
+	SYNTAX			SEQUENCE OF NcHttpsAccelEntry
+ 	ACCESS 			not-accessible
+ 	STATUS			mandatory
+ 	DESCRIPTION	
+			"Number of kilobytes sent to and recieved from the client side
+ 			per acceleration rule"
+
+	::= { ncHttp 38 }
+
+	ncHttpsAccelEntry	OBJECT-TYPE
+	SYNTAX			NcHttpsAccelEntry
+	ACCESS			not-accessible
+	STATUS			mandatory
+	DESCRIPTION
+			"Each entry contains the number of kilobytes sent and
+			 received to/from the clients side per acceleration
+				rule"
+
+	INDEX	 { ncHttpsAccelIndex }
+ 	::= { ncHttpsAccelTable 1 }
+
+	NcHttpsAccelEntry ::=
+	SEQUENCE {
+		ncHttpsAccelIndex		INTEGER,
+		ncHttpsAccelKbytesFromClient	Counter,
+ 		ncHttpsAccelKbytesToClient	Counter,
+		ncHttpsAccelHits	Counter
+		}
+
+	ncHttpsAccelIndex	OBJECT-TYPE
+	SYNTAX			INTEGER (1..513)
+ 	ACCESS			read-only
+ 	STATUS			mandatory
+ 	DESCRIPTION
+ 			"A unique value for each entry in the http acceleration
+			 stats table"
+	::= { ncHttpsAccelEntry 1 }
+
+ 	ncHttpsAccelKbytesFromClient OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS 			mandatory
+ 	DESCRIPTION
+			"The total number of kilobytes received from the client
+			 for this acceleration rule"
+	::= { ncHttpsAccelEntry 2 }
+
+	ncHttpsAccelKbytesToClient OBJECT-TYPE
+ 	SYNTAX			Counter
+	ACCESS			read-only
+ 	STATUS			mandatory
+	DESCRIPTION
+ 			"The total number of kilobytes sent to the client for
+			 this acceleration rule"
+	::= { ncHttpsAccelEntry 3 }
+
+ 	ncHttpsAccelHits	OBJECT-TYPE
+ 	SYNTAX			Counter
+ 	ACCESS			read-only
+ 	STATUS			mandatory
+ 	DESCRIPTION
+ 			" The number of times this acceleration rule has been hit"
+	::= { ncHttpsAccelEntry 4 }
+
+
+	ncNntp		OBJECT IDENTIFIER ::= { ncStats 7 }
+
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+	-- the nntp stats group
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+
+ 	ncNntpTotalRequests	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"NNTP total requests so far"
+	::= { ncNntp 1 }
+ 	ncNntpCacheableRequests	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"NNTP requests that were cacheable"
+	::= { ncNntp 2 }
+
+ 	ncNntpProxyRequests	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"NNTP requests that were non-cacheable"
+	::= { ncNntp 3 }
+
+ 	ncNntpServConns		OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Number of currently open TCP/IP connections to NNTP servers (active and idle)"
+	::= { ncNntp 4 }
+
+ 	ncNntpCliConns		OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Number of currently open TCP/IP connections to NNTP clients (active and idle)"
+	::= { ncNntp 5 }
+
+ 	ncNntpBWSavings		OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Bandwidth savings for NNTP requests"
+	::= { ncNntp 6 }
+
+ 	ncNntpRespTimePerByte	OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Response time per byte for NNTP requests"
+	::= { ncNntp 7 }
+
+	ncNntpBytesToClients  OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"Total NNTP bytes sent to clients"
+	::= { ncNntp 8 }
+
+	ncNntpBytesFromClients  OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"Total NNTP bytes received from clients"
+	::= { ncNntp 9 }
+
+	ncNntpBytesToServers  OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"Total NNTP bytes sent to servers"
+	::= { ncNntp 10 }
+
+	ncNntpBytesFromServers  OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"Total NNTP bytes received from servers"
+	::= { ncNntp 11 }
+
+ 	ncNntpObjHitrate	OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Object Hitrate of NNTP requests" 
+	::= { ncNntp 12 }
+
+ 	ncNntpActiveServConns	OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Number of currently active TCP/IP connections to NNTP servers"
+	::= { ncNntp 13 }
+
+ 	ncNntpActiveCliConns	OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Number of currently active TCP/IP connections to NNTP clients"
+	::= { ncNntp 14 }
+
+	ncFtp		OBJECT IDENTIFIER ::= { ncStats 8 }
+
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+	-- the ftp stats group
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+
+ 	ncFtpTotalRequests	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"FTP total requests so far"
+	::= { ncFtp 1 }
+
+ 	ncFtpHitRequests	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"FTP requests that resulted in hits so far"
+	::= { ncFtp 2 }
+
+ 	ncFtpMissRequests	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"FTP requests that resulted in misses so far"
+	::= { ncFtp 3 }
+
+ 	ncFtpServConns		OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Number of currently open TCP/IP connections to FTP servers (active and idle)"
+	::= { ncFtp 4 }
+
+ 	ncFtpCliConns		OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Number of currently open TCP/IP connections to FTP clients (active and idle)"
+	::= { ncFtp 5 }
+
+ 	ncFtpBWSavings		OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Bandwidth savings for FTP requests"
+	::= { ncFtp 6 }
+
+ 	ncFtpRespTimePerByte	OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Response time per byte for FTP requests"
+	::= { ncFtp 7 }
+
+	ncFtpBytesToClients  OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"Total FTP bytes sent to clients"
+	::= { ncFtp 8 }
+
+	ncFtpBytesFromClients  OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"Total FTP bytes received from clients"
+	::= { ncFtp 9 }
+
+	ncFtpBytesToServers  OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"Total FTP bytes sent to servers"
+	::= { ncFtp 10 }
+
+	ncFtpBytesFromServers  OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"Total FTP bytes received from servers"
+	::= { ncFtp 11 }
+
+ 	ncFtpObjHitrate	OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Object Hitrate of FTP requests" 
+	::= { ncFtp 12 }
+
+ 	ncFtpActiveServConns	OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Number of currently active TCP/IP connections to FTP servers"
+	::= { ncFtp 13 }
+
+ 	ncFtpActiveCliConns	OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Number of currently active TCP/IP connections to FTP clients"
+	::= { ncFtp 14 }
+
+	ncStreaming	OBJECT IDENTIFIER ::= { ncStats 9 }
+
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+	-- the streaming stats group
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+
+ 	ncStreamingServConns	OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Number of currently open TCP/IP connections to streaming servers (active and idle)"
+	::= { ncStreaming 1 }
+
+ 	ncStreamingCliConns	OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Number of currently open TCP/IP connections to streaming clients (active and idle)"
+	::= { ncStreaming 2 }
+
+ 	ncStreamingBWSavings	OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Bandwidth savings for all streaming requests"
+	::= { ncStreaming 3 }
+
+ 	ncStreamingRespTimePerByte	OBJECT-TYPE
+	SYNTAX				INTEGER
+	ACCESS				read-only
+	STATUS				mandatory
+	DESCRIPTION
+			"Response time per byte for all streaming requests"
+	::= { ncStreaming 4 }
+
+ 	ncStreamingHitRequests	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"STREAMING requests that resulted in hits so far"
+	::= { ncStreaming 5 }
+
+ 	ncStreamingMissRequests	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"STREAMING requests that resulted in misses so far"
+	::= { ncStreaming 6 }
+
+ 	ncStreamingTotalRequests	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"STREAMING total requests so far"
+	::= { ncStreaming 7 }
+
+	ncStreamingLiveBytesToClients  OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Total Streaming Live bytes sent to clients"
+	::= { ncStreaming 8 }
+
+	ncStreamingLiveBytesFromClients  OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Total Streaming Live bytes received from clients"
+	::= { ncStreaming 9 }
+
+	ncStreamingLiveBytesToServers  OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Total Streaming Live bytes sent to servers"
+	::= { ncStreaming 10 }
+
+	ncStreamingLiveBytesFromServers  OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Total Streaming Live bytes received from servers"
+	::= { ncStreaming 11 }
+
+	ncStreamingProxyBytesToClients  OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Total Streaming Proxy bytes sent to clients"
+	::= { ncStreaming 12 }
+
+	ncStreamingProxyBytesFromClients  OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Total Streaming Proxy bytes received from clients"
+	::= { ncStreaming 13 }
+
+	ncStreamingProxyBytesToServers  OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Total Streaming Proxy bytes sent to servers"
+	::= { ncStreaming 14 }
+
+	ncStreamingProxyBytesFromServers  OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Total Streaming Proxy bytes received from servers"
+	::= { ncStreaming 15 }
+
+	ncStreamingOndemandBytesToClients  OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Total Streaming Ondemand bytes sent to clients"
+	::= { ncStreaming 16 }
+
+	ncStreamingOndemandBytesFromClients  OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Total Streaming Ondemand bytes received from clients"
+	::= { ncStreaming 17 }
+
+	ncStreamingOndemandBytesToServers  OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Total Streaming Ondemand bytes sent to servers"
+	::= { ncStreaming 18 }
+
+	ncStreamingOndemandBytesFromServers  OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Total Streaming Ondemand bytes received from servers"
+	::= { ncStreaming 19 }
+
+ 	ncStreamingObjHitrate	OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Object Hitrate of Streaming requests" 
+	::= { ncStreaming 20 }
+
+	ncStreamingRealBytesToClients  OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Total Streaming Real bytes sent to clients"
+	::= { ncStreaming 21 }
+
+	ncStreamingRealBytesFromClients  OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Total Streaming Real bytes received from clients"
+	::= { ncStreaming 22 }
+
+	ncStreamingRealBytesToServers  OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Total Streaming Real bytes sent to servers"
+	::= { ncStreaming 23 }
+
+	ncStreamingRealBytesFromServers  OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Total Streaming Real bytes received from servers"
+	::= { ncStreaming 24 }
+
+	ncStreamingMmsBytesToClients  OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Total Streaming Mms bytes sent to clients"
+	::= { ncStreaming 25 }
+
+	ncStreamingMmsBytesFromClients  OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Total Streaming Mms bytes received from clients"
+	::= { ncStreaming 26 }
+
+	ncStreamingMmsBytesToServers  OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Total Streaming Mms bytes sent to servers"
+	::= { ncStreaming 27 }
+
+	ncStreamingMmsBytesFromServers  OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Total Streaming Mms bytes received from servers"
+	::= { ncStreaming 28 }
+
+	ncStreamingQuickTimeBytesToClients  OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Total Streaming QuickTime bytes sent to clients"
+	::= { ncStreaming 29 }
+
+	ncStreamingQuickTimeBytesFromClients  OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Total Streaming QuickTime bytes received from clients"
+	::= { ncStreaming 30 }
+
+	ncStreamingQuickTimeBytesToServers  OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Total Streaming QuickTime bytes sent to servers"
+	::= { ncStreaming 31 }
+
+	ncStreamingQuickTimeBytesFromServers  OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Total Streaming QuickTime bytes received from servers"
+	::= { ncStreaming 32 }
+
+ 	ncStreamingLiveBWSavings	OBJECT-TYPE
+	SYNTAX				INTEGER
+	ACCESS				read-only
+	STATUS				mandatory
+	DESCRIPTION
+			"Bandwidth savings for all Live streaming requests"
+	::= { ncStreaming 33 }
+
+ 	ncStreamingOndemandBWSavings	OBJECT-TYPE
+	SYNTAX				INTEGER
+	ACCESS				read-only
+	STATUS				mandatory
+	DESCRIPTION
+			"Bandwidth savings for all VOD streaming requests"
+	::= { ncStreaming 34 }
+
+ 	ncStreamingRealBWSavings	OBJECT-TYPE
+	SYNTAX				INTEGER
+	ACCESS				read-only
+	STATUS				mandatory
+	DESCRIPTION
+			"Bandwidth savings for all Real streaming requests"
+	::= { ncStreaming 35 }
+
+ 	ncStreamingMmsBWSavings		OBJECT-TYPE
+	SYNTAX				INTEGER
+	ACCESS				read-only
+	STATUS				mandatory
+	DESCRIPTION
+			"Bandwidth savings for all MMS streaming requests"
+	::= { ncStreaming 36 }
+
+ 	ncStreamingQuickTimeBWSavings	OBJECT-TYPE
+	SYNTAX				INTEGER
+	ACCESS				read-only
+	STATUS				mandatory
+	DESCRIPTION
+			"Bandwidth savings for all QuickTime streaming requests"
+	::= { ncStreaming 37 }
+
+ 	ncStreamingActiveServConns	OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Number of currently active TCP/IP connections to streaming servers"
+	::= { ncStreaming 38 }
+
+ 	ncStreamingActiveCliConns	OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Number of currently active TCP/IP connections to streaming clients"
+	::= { ncStreaming 39 }
+
+	ncStreamingRtspWMBytesToClients OBJECT-TYPE
+	SYNTAX				Counter
+	ACCESS				read-only
+	STATUS				mandatory
+	DESCRIPTION
+			"Total Streaming Windows Media RTSP bytes sent to clients"
+	::= { ncStreaming 40 }
+
+	ncStreamingRtspWMBytesFromClients	OBJECT-TYPE
+	SYNTAX					Counter
+	ACCESS					read-only
+	STATUS					mandatory
+	DESCRIPTION
+			"Total Streaming Windows Media RTSP bytes received from clients"
+	::= { ncStreaming 41 }
+
+	ncStreamingRtspWMBytesToServers	OBJECT-TYPE
+	SYNTAX				Counter
+	ACCESS				read-only
+	STATUS				mandatory
+	DESCRIPTION
+			"Total Streaming Windows Media RTSP bytes sent to servers"
+	::= { ncStreaming 42 }
+	
+	ncStreamingRtspWMBytesFromServers	OBJECT-TYPE
+	SYNTAX					Counter
+	ACCESS					read-only
+	STATUS					mandatory
+	DESCRIPTION
+			"Total Streaming Windows Media RTSP bytes received from servers"
+	::= { ncStreaming 43 }
+
+	ncStreamingRtspWMBWSavings	OBJECT-TYPE
+	SYNTAX				INTEGER
+	ACCESS				read-only
+	STATUS				mandatory
+	DESCRIPTION
+			"Bandwidth savings for all Windows Media RTSP streaming requests"
+	::= { ncStreaming 44 }
+
+	ncStreamingAccelTable	OBJECT-TYPE
+ 	SYNTAX			SEQUENCE OF NcStreamingAccelEntry
+	ACCESS			not-accessible
+	STATUS			mandatory
+ 	DESCRIPTION
+			 "Number of kilobytes sent to and recieved from the 
+			 client side per acceleration rule"
+
+ 	::= { ncStreaming 45 }
+
+ 	ncStreamingAccelEntry	OBJECT-TYPE
+ 	SYNTAX			NcStreamingAccelEntry
+	ACCESS 			not-accessible
+	STATUS 			mandatory
+	DESCRIPTION
+ 			"Each entry contains the number of kilobytes sent and
+			 received to/from the clients side per acceleration
+			 rule"
+
+ 	INDEX	{ ncStreamingAccelIndex }
+ 	::= { ncStreamingAccelTable 1 }
+
+	NcStreamingAccelEntry ::=
+ 	SEQUENCE {
+ 		ncStreamingAccelIndex			INTEGER,
+ 		ncStreamingAccelKbytesFromClient	Counter,
+ 		ncStreamingAccelKbytesToClient		Counter,
+ 		ncStreamingAccelHits			Counter
+	}
+
+	ncStreamingAccelIndex	OBJECT-TYPE
+ 	SYNTAX			INTEGER (1..513)
+ 	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"A unique value for each entry in the streaming
+			 acceleration  stats table"
+ 	::= { ncStreamingAccelEntry 1 }
+
+ 	ncStreamingAccelKbytesFromClient OBJECT-TYPE
+	SYNTAX			Counter
+ 	ACCESS			read-only
+ 	STATUS			mandatory
+	DESCRIPTION
+			"The total number of kilobytes received from the client
+			 for this acceleration rule"
+	::= { ncStreamingAccelEntry 2 }
+
+	ncStreamingAccelKbytesToClient OBJECT-TYPE
+	SYNTAX			Counter
+ 	ACCESS			read-only
+ 	STATUS			mandatory
+	DESCRIPTION
+			"The total number of kilobytes sent to the client for
+			 this acceleration rule"
+	::= { ncStreamingAccelEntry 3 }
+
+	ncStreamingAccelHits	OBJECT-TYPE
+ 	SYNTAX			Counter
+ 	ACCESS			read-only
+	STATUS 			mandatory
+ 	DESCRIPTION
+ 			" The number of times this acceleration rule has 
+				been hit"
+ 	::= { ncStreamingAccelEntry 4 }
+
+	ncStreamingClientsDelayedSW	OBJECT-TYPE
+	SYNTAX				Counter
+	ACCESS				read-only
+	STATUS				mandatory
+	DESCRIPTION
+			"Number of clients delayed because of a Bandwidth Limit"
+	::= { ncStreaming 46 }
+
+	ncTotalBWSavings	OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Total Bandwidth savings for HTTP, FTP, NNTP, and Streaming protocols"
+	::= { ncStats 10 }
+
+	ncDns		OBJECT IDENTIFIER ::= { ncStats 11 }
+    
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+	-- the netcache dns stats group
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+
+	ncDnsRequestsReceived	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Total DNS requests received from clients"
+	::= { ncDns 1 }
+
+	ncDnsCacheHits		OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Hits on the DNS cache.  This includes hits
+			for DNS lookups generated by NetCache internally"
+	::= { ncDns 2 }
+
+	ncDnsCacheMisses	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Misses on the DNS cache.  This includes misses
+			for DNS lookups generated by NetCache internally"
+	::= { ncDns 3 }
+
+	ncDnsSuccessfulForwardLookups	OBJECT-TYPE
+	SYNTAX				Counter
+	ACCESS				read-only
+	STATUS				mandatory
+	DESCRIPTION
+			"Forward DNS lookups that are successful"
+	::= { ncDns 4 }
+
+	ncDnsFailedForwardLookups	OBJECT-TYPE
+	SYNTAX				Counter
+	ACCESS				read-only
+	STATUS				mandatory
+	DESCRIPTION
+			"Forward DNS lookups that failed"
+	::= { ncDns 5 }
+
+	ncDnsPendingForwardLookups	OBJECT-TYPE
+	SYNTAX				INTEGER
+	ACCESS				read-only
+	STATUS				mandatory
+	DESCRIPTION
+			"Forward DNS lookups that are in progress"
+	::= { ncDns 6 }
+
+	ncDnsSuccessfulReverseLookups	OBJECT-TYPE
+	SYNTAX				Counter
+	ACCESS				read-only
+	STATUS				mandatory
+	DESCRIPTION
+			"Reverse DNS lookups that are successful"
+	::= { ncDns 7 }
+
+	ncDnsFailedReverseLookups	OBJECT-TYPE
+	SYNTAX				Counter
+	ACCESS				read-only
+	STATUS				mandatory
+	DESCRIPTION
+			"Reverse DNS lookups that failed"
+	::= { ncDns 8 }
+
+	ncDnsPendingReverseLookups	OBJECT-TYPE
+	SYNTAX				INTEGER
+	ACCESS				read-only
+	STATUS				mandatory
+	DESCRIPTION
+			"Reverse DNS lookups that are in progress"
+	::= { ncDns 9 }
+
+	ncDnsIres	OBJECT IDENTIFIER ::= { ncDns 10 }
+    
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+	-- the netcache dns ires stats group
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+
+
+	ncDnsIresIsEnabled		OBJECT-TYPE
+	SYNTAX				INTEGER {
+						false(1),
+						true(2)
+					}
+	ACCESS				read-only
+	STATUS					mandatory
+	DESCRIPTION
+			"Has Full Service Resolver been enabled"
+	::= { ncDnsIres 1 }
+
+	ncDnsIresIsInitialised		OBJECT-TYPE
+	SYNTAX				INTEGER {
+						false(1),
+						true(2)
+					}
+	ACCESS				read-only
+	STATUS				mandatory
+	DESCRIPTION
+			"Has Full Service Resolver initalised"
+	::= { ncDnsIres 2 }
+
+	ncDnsIresForwardLookups		OBJECT-TYPE
+	SYNTAX				Counter
+	ACCESS				read-only
+	STATUS				mandatory
+	DESCRIPTION
+			"Full Service Resolver's Forward Lookups"
+	::= { ncDnsIres 3 }
+
+	ncDnsIresPendingForwardLookups	OBJECT-TYPE
+	SYNTAX				Counter
+	ACCESS				read-only
+	STATUS				mandatory
+	DESCRIPTION
+			"Full Service Resolver's Pending Forward Lookups"
+	::= { ncDnsIres 4 }
+
+	ncDnsIresReverseLookups		OBJECT-TYPE
+	SYNTAX				Counter
+	ACCESS				read-only
+	STATUS				mandatory
+	DESCRIPTION
+			"Full Service Resolver's Reverse Lookups"
+	::= { ncDnsIres 5 }
+
+	ncDnsIresPendingReverseLookups	OBJECT-TYPE
+	SYNTAX				Counter
+	ACCESS				read-only
+	STATUS				mandatory
+	DESCRIPTION
+			"Full Service Resolver's Pending Reverse Lookups"
+	::= { ncDnsIres 6 }
+
+
+	ncAuth		OBJECT IDENTIFIER ::= { ncStats 12 }
+
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+	-- the netcache authentication stats group
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+
+	ncNtlm		OBJECT IDENTIFIER ::= { ncAuth 1 }
+
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+	-- the netcache ntlm stats group
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+
+ 	ncNtlmPossibleProblem	OBJECT-TYPE
+	SYNTAX			INTEGER {
+					false(1),
+					true(2)
+				}
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Whether a possible ntlm problem is detected 
+			in the appliance's domain environment."
+	::= { ncNtlm 1 }
+
+
+	ncRM		OBJECT IDENTIFIER ::= { ncStats 13 }
+
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+	-- the netcache resource management group
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+
+	ncRMMem		OBJECT IDENTIFIER ::= { ncRM 1 }
+
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+	-- the netcache memory stats group
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+	ncRMMemTotal            OBJECT-TYPE
+	SYNTAX                  INTEGER
+	ACCESS                  read-only
+	STATUS                  mandatory
+	DESCRIPTION
+	                "Total memory in kilobytes available for 
+					allocations after boot. It does not imply 
+					the total system memory."
+	::= { ncRMMem 1 }
+
+	ncRMMemFree             OBJECT-TYPE
+	SYNTAX                  INTEGER
+	ACCESS                  read-only
+	STATUS                  mandatory
+	DESCRIPTION
+	                "Current free memory in kilobytes available 
+					for allocations."
+	::= { ncRMMem 2 }
+
+	-- -- -- -- -- -- -- -- --
+	-- the snapmirror group --
+	-- -- -- -- -- -- -- -- --
+
+	snapmirrorOn		OBJECT-TYPE
+	SYNTAX			INTEGER { off(1), on(2) }
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Indicates whether snapmirror has been turned on
+			or not."
+	::= { snapmirror 1 }
+
+	-- the old active snapmirror destination count, new name is
+	-- snapmirrorActiveDstNumber.  DEPRECATED
+	snapmirrorActiveRestoreCount	OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"Number of active SnapMirror restores."
+
+	::= { snapmirror 2 }
+
+	-- the old active snapmirror destination count, new name is
+	-- snapmirrorActiveDstNumber.  DEPRECATED
+	snapmirrorScheduledRestoreCount	OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"Number of scheduled SnapMirror restores."
+
+	::= { snapmirror 3 }
+	
+	-- the old active snapmirror destination count, new name is
+	-- snapmirrorActiveDstNumber.  DEPRECATED
+	snapmirrorBackupNumber	OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+  	STATUS		mandatory
+	DESCRIPTION
+			"Number of active SnapMirror backups."
+
+	::= { snapmirror 4 }
+
+	-- the old active snapmirror destination count, new name is
+	-- snapmirrorActiveDstNumber.  DEPRECATED
+	snapmirrorBackupSuccesses OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION	
+			"Number of SnapMirror backups which completed.
+			Reset on reboot."
+
+	::= { snapmirror 5 }
+
+	-- the old active snapmirror destination count, new name is
+	-- snapmirrorActiveDstNumber.  DEPRECATED
+	snapmirrorRestoreSuccesses	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION	
+			"Number of SnapMirror restores which completed.
+			Reset on reboot."
+
+	::= { snapmirror 6 }
+
+	-- the old active snapmirror destination count, new name is
+	-- snapmirrorActiveDstNumber.  DEPRECATED
+	snapmirrorBackupAborts		OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION	
+			"Number of SnapMirror backup transfers which have
+			aborted. Reset on reboot."
+
+	::= { snapmirror 7 }
+
+	-- the old active snapmirror destination count, new name is
+	-- snapmirrorActiveDstNumber.  DEPRECATED
+	snapmirrorRestoreRestartAborts	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION	
+			"Number of SnapMirror restore temporary aborts.
+			Reset on reboot."
+
+	::= { snapmirror 8 }
+
+	-- the old active snapmirror destination count, new name is
+	-- snapmirrorActiveDstNumber.  DEPRECATED
+	snapmirrorRestoreWaitAborts	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION	
+			"Number of SnapMirror restore permanent aborts.
+			Reset on reboot."
+
+	::= { snapmirror 9 }
+
+	-- the old active snapmirror destination count, new name is
+	-- snapmirrorActiveDstNumber.  DEPRECATED
+	snapmirrorWrittenBytes	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION	
+			"Number of Megabytes written by SnapMirror.
+			Reset on reboot."
+
+	::= { snapmirror 10 }
+
+	-- the old active snapmirror destination count, new name is
+	-- snapmirrorActiveDstNumber.  DEPRECATED
+	snapmirrorReadBytes	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION	
+			"Number of Megabytes read by SnapMirror.
+			Reset on reboot."
+
+	::= { snapmirror 11 }
+
+	snapmirrorActiveDstNumber	OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"Number of active SnapMirror destination."
+
+	::= { snapmirror 12 }
+
+	snapmirrorActiveSrcNumber	OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+  	STATUS		mandatory
+	DESCRIPTION
+			"Number of active SnapMirror Source."
+
+	::= { snapmirror 13 }
+
+	snapmirrorFilerTotalDstSuccesses OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION	
+			"Total number of successful snapmirror transfers to
+			the destination. Persistent across reboot."
+
+	::= { snapmirror 14 }
+
+	snapmirrorFilerTotalSrcSuccesses	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION	
+			"Total number of successful snapmirror transfers
+			from the source. Persistent across reboot."
+
+	::= { snapmirror 15 }
+
+	snapmirrorFilerTotalSrcFailures	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION	
+			"Total number of failed SnapMirror transfers on
+			the source. Persistent across reboot."
+
+	::= { snapmirror 16 }
+
+	snapmirrorFilerTotalDstFailures	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION	
+			"Total number of failed SnapMirror transfers on
+			the destination. Persistent across reboot."
+
+	::= { snapmirror 17 }
+
+	snapmirrorFilerTotalDstDeferments	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION	
+			"Total number of deferred snapmirror transfer on
+			the destination. Persistent across reboot."
+
+	::= { snapmirror 18 }
+
+	snapmirrorIsLicensed	OBJECT-TYPE
+	SYNTAX  	INTEGER {
+				false(1),
+				true(2)
+			}
+	ACCESS  	read-only
+	STATUS		mandatory
+	DESCRIPTION
+		"Whether the snapmirror is licensed on the filer."
+
+	::= { snapmirror 19 }
+
+	snapmirrorStatusTable	OBJECT-TYPE
+	SYNTAX		SEQUENCE OF SnapmirrorStatusEntry
+	ACCESS		not-accessible
+	STATUS		mandatory
+	DESCRIPTION
+			"provide a list of snapmirror status."
+
+	::= { snapmirror 20 }
+
+	snapmirrorStatusEntry	OBJECT-TYPE
+	SYNTAX		SnapmirrorStatusEntry
+	ACCESS		not-accessible
+	STATUS		mandatory
+	DESCRIPTION
+			"Provide a report of current status of snapmirror."
+
+	INDEX	{ snapmirrorIndex }
+	::= { snapmirrorStatusTable 1 }
+
+	SnapmirrorStatusEntry ::=
+	    SEQUENCE {
+	    	snapmirrorIndex
+			INTEGER,
+		snapmirrorSrc
+			OCTET STRING,
+		snapmirrorDst
+			OCTET STRING,
+		snapmirrorStatus
+			INTEGER,
+		snapmirrorState
+			INTEGER,
+		snapmirrorLag
+			TimeTicks,
+		snapmirrorTotalSuccesses
+			Counter,
+		snapmirrorTotalRestartSuccesses
+			Counter,
+		snapmirrorTotalFailures
+			Counter,
+		snapmirrorTotalDeferments
+			Counter,
+		snapmirrorTotalTransMBs
+			Counter,
+		snapmirrorTotalTransTimeSeconds
+			Counter,
+		snapmirrorThrottleValue
+			INTEGER,
+		snapmirrorMirrorTimestamp
+			DisplayString,
+		snapmirrorBaseSnapshot
+			DisplayString,
+		snapmirrorLastTransType
+			DisplayString,
+		snapmirrorLastTransMBs
+			Counter,
+		snapmirrorLastTransTimeSeconds
+			Counter,
+		snapmirrorSchedule
+			DisplayString,
+		snapmirrorScheduleDesc
+			DisplayString,
+		snapmirrorArguments
+			DisplayString,
+		snapmirrorSyncToAsync
+		        Counter
+	    }
+
+	snapmirrorIndex	OBJECT-TYPE
+	SYNTAX		INTEGER (1..2147483647)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"Index into the snapmirror status table."
+
+	::= { snapmirrorStatusEntry 1 }
+
+	snapmirrorSrc	OBJECT-TYPE
+	SYNTAX		OCTET STRING
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"Source of the snapmirror. <filer>:<vol> or
+			<filer>:/vol/<qtree_name>"
+
+	::= { snapmirrorStatusEntry 2 }
+
+	snapmirrorDst	OBJECT-TYPE
+	SYNTAX		OCTET STRING
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"Destination of the snapmirror.
+			<filer>:<vol> or <filer>:/vol/<qtree_name>"
+
+	::= { snapmirrorStatusEntry 3 }
+
+	snapmirrorStatus	OBJECT-TYPE
+	SYNTAX		INTEGER {
+				idle(1),
+				transferring(2),
+				pending(3),
+				aborting(4),
+				migrating(5),
+				quiescing(6),
+				resyncing(7),
+				waiting(8),
+				syncing(9),
+				in-sync(10)
+				}
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"Current transfer status of the snapmirror."
+
+	::= { snapmirrorStatusEntry 4 }
+
+	snapmirrorState	OBJECT-TYPE
+	SYNTAX		INTEGER {
+				uninitialized(1),
+				snapmirrored(2),
+				broken-off(3),
+				quiesced(4),
+				source(5),
+				unknown(6)
+				}
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"Current state of the snapmirror."
+
+	::= { snapmirrorStatusEntry 5 }
+
+	snapmirrorLag	OBJECT-TYPE
+	SYNTAX		TimeTicks
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"How far behind from the source the destination is."
+
+	::= { snapmirrorStatusEntry 6 }
+
+	snapmirrorTotalSuccesses	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+		"Total number of successful transfer since the snapmirror
+		is initialized. Persistent across reboot."
+
+	::= { snapmirrorStatusEntry 7 }
+
+	snapmirrorTotalRestartSuccesses	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+		"Total number of successful restarted transfer since
+		the snapmirror is initialized. Persistent across reboot."
+
+	::= { snapmirrorStatusEntry 8 }
+
+	snapmirrorTotalFailures	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+		"Total number of failed or aborted transfer since
+		the snapmirror is initialized. Persistent across reboot."
+
+	::= { snapmirrorStatusEntry 9 }
+
+	snapmirrorTotalDeferments	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+		"Total number of deferment since the snapmirror
+		is initialized. Persistent across reboot."
+
+	::= { snapmirrorStatusEntry 10 }
+
+	snapmirrorTotalTransMBs		OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+		"Total transfer size in MB for the snapmirror.
+		Reset on reboot."
+
+	::= { snapmirrorStatusEntry 11 }
+
+	snapmirrorTotalTransTimeSeconds	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+		"Total number of seconds spent in successful transfer for the 
+		snapmirror. Reset on reboot."
+
+	::= { snapmirrorStatusEntry 12 }
+
+	snapmirrorThrottleValue	OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+		"Current throttle value for the snapmirror."
+
+	::= { snapmirrorStatusEntry 13 }
+
+	snapmirrorMirrorTimestamp	OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+		"Timestamp of the last snapshot successfully transferred from 
+		 the source to the destination."
+
+	::= { snapmirrorStatusEntry 14 }
+
+	snapmirrorBaseSnapshot	OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+		"The name of the current base snapshot for the snapmirror."
+
+	::= { snapmirrorStatusEntry 15 }
+
+	snapmirrorLastTransType	OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+		"The type of the previous successful transfer."
+
+	::= { snapmirrorStatusEntry 16 }
+
+	snapmirrorLastTransMBs	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+		"Last successful transfer size in MB for the snapmirror."
+
+	::= { snapmirrorStatusEntry 17 }
+
+	snapmirrorLastTransTimeSeconds	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+		"Duration of last successful transfer in seconds for the
+		 snapmirror."
+
+	::= { snapmirrorStatusEntry 18 }
+
+	snapmirrorSchedule	OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+		"Update schedule for the snapmirror in conf file format."
+
+	::= { snapmirrorStatusEntry 19 }
+
+	snapmirrorScheduleDesc	OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+		"Description of the update schedule for the snapmirror."
+
+	::= { snapmirrorStatusEntry 20 }
+
+	snapmirrorArguments	OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+		"Arguments for the snapmirror in conf file format."
+
+	::= { snapmirrorStatusEntry 21 }
+
+        snapmirrorSyncToAsync	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+	        "The number of times changing from sync mode to async mode 
+		since the snapmirror is initialized. Persistent across reboot."
+    
+	::= { snapmirrorStatusEntry 22 }
+
+	snapmirrorConnTable	OBJECT-TYPE
+	SYNTAX		SEQUENCE OF SnapmirrorConnEntry
+	ACCESS		not-accessible
+	STATUS		mandatory
+	DESCRIPTION
+	        "Provide a list of snapmirror connection definitions."
+
+	::= { snapmirror 21 }
+
+	snapmirrorConnEntry	OBJECT-TYPE
+	SYNTAX		SnapmirrorConnEntry
+	ACCESS		not-accessible
+	STATUS		mandatory
+	DESCRIPTION
+		"Provide a report of a defined multipath connection."
+
+	INDEX	{ snapmirrorConnIndex }
+	::= { snapmirrorConnTable 1 }
+
+        SnapmirrorConnEntry ::=
+	    SEQUENCE {
+	    	snapmirrorConnIndex
+			INTEGER,
+		snapmirrorConnName
+			DisplayString,
+		snapmirrorConnType
+			INTEGER,
+		snapmirrorConnSrc1
+			DisplayString,
+		snapmirrorConnDst1
+		        DisplayString,
+		snapmirrorConnSrc2
+		        DisplayString, 
+		snapmirrorConnDst2
+		        DisplayString 
+	    }
+
+	snapmirrorConnIndex	OBJECT-TYPE
+	SYNTAX		INTEGER (1..2147483647)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+		"Index into the snapmirror multipath connection table."
+
+	::= { snapmirrorConnEntry 1 }
+
+	snapmirrorConnName	OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+		"The name of the snapmirror multipath connection."
+	    
+	::= { snapmirrorConnEntry 2 }
+
+	snapmirrorConnType	OBJECT-TYPE
+	SYNTAX		INTEGER {
+	                        multi(1),
+				failover(2)
+				}
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+		"The type of the snapmirror multipath connection."
+
+	::= { snapmirrorConnEntry 3 }
+
+	snapmirrorConnSrc1	OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+		"The name of the source for the first path."
+
+        ::= { snapmirrorConnEntry 4 }
+
+	snapmirrorConnDst1	OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+	        "The name of the destination for the first path."
+
+        ::= { snapmirrorConnEntry 5 }
+
+	snapmirrorConnSrc2	OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+		"The name of the source for the second path."
+
+	::= { snapmirrorConnEntry 6 }   
+
+	snapmirrorConnDst2	OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+		"The name of the destination for the second path."
+
+        ::= { snapmirrorConnEntry 7 }
+
+	-- -- -- -- -- -- -- -- --
+	-- the snapvault group
+	-- -- -- -- -- -- -- -- --
+           
+                  -- this group contains statistics for the whole system
+                  -- unless otherwise specified.
+
+	svOn			OBJECT-TYPE
+	SYNTAX			INTEGER { off(1), on(2) }
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Indicates whether snapvault has been turned on
+			or not."
+	::= { snapvault 1 }
+
+	svSystemActiveDstNumber	OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"Number of active snapvault destionations."
+
+	::= { snapvault 2 }
+
+	svSystemActiveSrcNumber	OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+  	STATUS		mandatory
+	DESCRIPTION
+			"Number of active snapvault sources."
+
+	::= { snapvault 3 }
+
+	svSystemTotalPrimarySuccesses	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION	
+			"Total number of successful snapvault transfers
+			from the snapvault primary. Persistent across reboot."
+
+        ::= { snapvault 4 }
+
+	svSystemTotalSecondarySuccesses OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION	
+			"Total number of successful snapvault transfers to
+			the snapvault secondary. Persistent across reboot."
+
+	::= { snapvault 5 }
+
+	svSystemTotalPrimaryFailures	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION	
+			"Total number of failed snapvault transfers on
+			the snapvault primary. Persistent across reboot."
+
+	::= { snapvault 6 }
+
+	svSystemTotalSecondaryFailures	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION	
+			"Total number of failed snapvault transfers on
+			the snapvault secondary. Persistent across reboot."
+
+	::= { snapvault 7 }
+
+	svSystemTotalSecondaryDeferments	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION	
+			"Total number of deferred snapvault transfers on
+			the snapvault secondary. Persistent across reboot."
+
+	::= { snapvault 8 }
+
+	svPrimaryIsLicensed	OBJECT-TYPE
+	SYNTAX  	INTEGER {
+				false(1),
+				true(2)
+			}
+	ACCESS  	read-only
+	STATUS		mandatory
+	DESCRIPTION
+		"Whether the snapvault_client(primary) is licensed on the filer."
+
+	::= { snapvault 9 }
+
+	svSecondaryIsLicensed	OBJECT-TYPE
+	SYNTAX  	INTEGER {
+				false(1),
+				true(2)
+			}
+	ACCESS  	read-only
+	STATUS		mandatory
+	DESCRIPTION
+		"Whether the snapvault_server(secondary) is licensed on the filer."
+
+	::= { snapvault 10 }
+
+
+
+	snapvaultStatusTable	OBJECT-TYPE
+	SYNTAX		SEQUENCE OF SnapvaultStatusEntry
+	ACCESS		not-accessible
+	STATUS		mandatory
+	DESCRIPTION
+			"provide a list of snapvault status."
+
+	::= { snapvault 11 }
+
+	snapvaultStatusEntry	OBJECT-TYPE
+	SYNTAX		SnapvaultStatusEntry
+	ACCESS		not-accessible
+	STATUS		mandatory
+	DESCRIPTION
+			"Provide a report of current status of snapvault."
+
+	INDEX	{ svIndex }
+	::= { snapvaultStatusTable 1 }
+
+	SnapvaultStatusEntry ::=
+	    SEQUENCE {
+	    	svIndex
+			INTEGER,
+		svSrc
+			OCTET STRING,
+		svDst
+			OCTET STRING,
+		svStatus
+			INTEGER,
+		svState
+			INTEGER,
+		svLag
+			TimeTicks,
+		svTotalSuccesses
+			Counter,
+		svTotalRestartSuccesses
+			Counter,
+		svTotalFailures
+			Counter,
+		svTotalDeferments
+			Counter,
+		svTotalTransMBs
+			Counter,
+		svTotalTransTimeSeconds
+			Counter,
+		svThrottleValue
+			INTEGER,
+		svSrcSnapshotTime
+		        INTEGER,
+		svBaseSnapshot
+			DisplayString,
+		svLastTransType
+			DisplayString,
+		svLastTransMBs
+			INTEGER,
+		svLastTransTimeSeconds
+			INTEGER
+	    }
+
+	svIndex		OBJECT-TYPE
+	SYNTAX		INTEGER (1..2147483647)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"Index into the snapvault status table."
+
+	::= { snapvaultStatusEntry 1 }
+
+	svSrc		OBJECT-TYPE
+	SYNTAX		OCTET STRING
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"Source of the snapvault relationship.
+			<filer>:/vol/<qtree_name>"
+
+	::= { snapvaultStatusEntry 2 }
+
+	svDst		OBJECT-TYPE
+	SYNTAX		OCTET STRING
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"Destionation of the snapvault relationship.
+			<filer>:/vol/<qtree_name>"
+
+	::= { snapvaultStatusEntry 3 }
+
+	svStatus	OBJECT-TYPE
+	SYNTAX		INTEGER {
+				idle(1),
+				transferring(2),
+				pending(3),
+				aborting(4),
+				quiescing(6),
+				resyncing(7),
+				paused(12)
+				}
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"Current transfer status of the snapvault relationship."
+
+	::= { snapvaultStatusEntry 4 }
+
+	svState		OBJECT-TYPE
+	SYNTAX		INTEGER {
+				uninitialized(1),
+				snapvaulted(2),
+				broken-off(3),
+				quiesced(4),
+				source(5),
+				unknown(6),
+				restoring(7)
+				}
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"Current state of the snapvault relationship."
+
+	::= { snapvaultStatusEntry 5 }
+
+	svLag		OBJECT-TYPE
+	SYNTAX		TimeTicks
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"How far behind from the source the destination is."
+
+	::= { snapvaultStatusEntry 6 }
+
+	svTotalSuccesses	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+		"Total number of successful transfer since the snapvault
+		 relationship was established. Persistent across reboot."
+
+	::= { snapvaultStatusEntry 7 }
+
+	svTotalRestartSuccesses	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+		"Total number of successful restarted transfer since
+		 the snapvault relationship was established. Persistent 
+		 across reboot."
+
+	::= { snapvaultStatusEntry 8 }
+
+	svTotalFailures	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+		"Total number of failed or aborted transfer since
+		 the snapvault relationship was established. Persistent 
+		 across reboot."
+
+	::= { snapvaultStatusEntry 9 }
+
+	svTotalDeferments	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+		"Total number of deferment since the snapvault
+		 relationship was established. Persistent across reboot."
+
+	::= { snapvaultStatusEntry 10 }
+
+	svTotalTransMBs		OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+		"Total transfer size in MB for the snapvault.
+		Reset on reboot."
+
+	::= { snapvaultStatusEntry 11 }
+
+	svTotalTransTimeSeconds	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+		"Total number of seconds spent in successful transfer for the 
+		 snapvault relationship. Reset on reboot."
+
+	::= { snapvaultStatusEntry 12 }
+
+	svThrottleValue	OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+		"Current throttle value for the snapvault relationship."
+
+	::= { snapvaultStatusEntry 13 }
+
+	svSrcSnapshotTime	OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+		"Time when the source snapshot was created. The time in 
+		seconds since January 1, 1970. The source snapshot here 
+		is the last snapshot successfully transferred from the 
+		source to the destination."
+
+	::= { snapvaultStatusEntry 14 }
+
+	svBaseSnapshot	OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+		"The name of the current base snapshot for the 
+		 snapvault relationship."
+
+	::= { snapvaultStatusEntry 15 }
+
+	svLastTransType	OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+		"The type of the previous successful transfer."
+
+	::= { snapvaultStatusEntry 16 }
+
+	svLastTransMBs	OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+		"Last successful transfer size in MB for the snapvault 
+		 relationship."
+
+	::= { snapvaultStatusEntry 17 }
+
+	svLastTransTimeSeconds	OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+		"Duration of last successful transfer in seconds for the
+		 snapvault relationship."
+
+	::= { snapvaultStatusEntry 18 }
+
+	snapvaultHostTable	OBJECT-TYPE
+	SYNTAX		SEQUENCE OF SnapvaultHostEntry
+	ACCESS		not-accessible
+	STATUS		mandatory
+	DESCRIPTION
+			"Provide a list of remote snapvault hosts."
+
+	::= { snapvault 12 }
+
+	snapvaultHostEntry	OBJECT-TYPE
+	SYNTAX		SnapvaultHostEntry
+	ACCESS		not-accessible
+	STATUS		mandatory
+	DESCRIPTION
+			"Provide snapvault statistics for a remote host
+			 which has one or more current established 
+			 relationships with the local snapvault system."
+
+	INDEX	{ svHostIndex }
+	::= { snapvaultHostTable 1 }
+
+	SnapvaultHostEntry ::=
+	    SEQUENCE {
+	    	svHostIndex
+			INTEGER,
+		svHostName
+			DisplayString,
+		svHostType
+			INTEGER,
+		svHostTotalSuccesses
+			INTEGER,
+		svHostTotalFailures
+			INTEGER,
+		svHostTotalDeferments
+			INTEGER
+	    }
+
+	svHostIndex	OBJECT-TYPE
+	SYNTAX		INTEGER (1..2147483647)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"Index into the snapvault remote host table."
+
+	::= { snapvaultHostEntry 1 }
+
+	svHostName	OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+		"The name of the remote snapvault host."
+	    
+	::= { snapvaultHostEntry 2 }
+
+	svHostType	OBJECT-TYPE
+	SYNTAX		INTEGER {
+	                        primary(1),
+				secondary(2)
+				}
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+		"The type of the remote snapvault host."
+
+	::= { snapvaultHostEntry 3 }
+
+	svHostTotalSuccesses	OBJECT-TYPE
+	SYNTAX		INTEGER 
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+	        "Total number of successful snapvault transfers
+		for all current established relationships between
+		the local snapvault system and the given remote host."
+
+	::= { snapvaultHostEntry 4 }
+
+	svHostTotalFailures	OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+	        "Total number of failed snapvault transfers
+		for all current established relationships between
+		the local snapvault system and the given remote host."
+
+	::= { snapvaultHostEntry 5 }
+
+	svHostTotalDeferments	OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+		"Total number of deferred snapvault transfers for
+		all current established relationships between
+		the local snapvault system and the given remote host.
+		0 for snapvault client host."
+
+	::= { snapvaultHostEntry 6 }
+
+
+	snapvaultSchedTable	OBJECT-TYPE
+	SYNTAX		SEQUENCE OF SnapvaultSchedEntry
+	ACCESS		not-accessible
+	STATUS		mandatory
+	DESCRIPTION
+			"Provide a list of snapvault schedules."
+
+	::= { snapvault 13 }
+
+	snapvaultSchedEntry	OBJECT-TYPE
+	SYNTAX		SnapvaultSchedEntry
+	ACCESS		not-accessible
+	STATUS		mandatory
+	DESCRIPTION
+			"Provide a report of schedules of snapvault."
+
+	INDEX	{ svSchedIndex }
+	::= { snapvaultSchedTable 1 }
+
+	SnapvaultSchedEntry ::=
+	    SEQUENCE {
+	    	svSchedIndex
+			INTEGER,
+		svSchedVolume
+			DisplayString,
+		svSchedSnapshot
+			DisplayString,
+		svSchedStatus
+			INTEGER,
+		svSchedType
+			INTEGER,
+		svSchedSchedule
+			DisplayString
+	    }
+
+	svSchedIndex	OBJECT-TYPE
+	SYNTAX		INTEGER (1..2147483647)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"Index into the snapvault schedule table."
+
+	::= { snapvaultSchedEntry 1 }
+
+	svSchedVolume	OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+		"The name of the volume on the snapvault for the 
+		 snapvault schedule. This does not have a /vol/ prefix."
+	    
+	::= { snapvaultSchedEntry 2 }
+
+	svSchedSnapshot	OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+		"The name of the snapshot for the snapvault schedule."
+
+	::= { snapvaultSchedEntry 3 }
+
+	svSchedStatus	OBJECT-TYPE
+	SYNTAX		INTEGER {
+				idle(1),
+				queued(2),
+				active(3),
+				aborting(4)
+				}
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+		"Current status of the snapvault schedule."
+
+	::= { snapvaultSchedEntry 4 }
+
+	svSchedType	OBJECT-TYPE
+	SYNTAX		INTEGER {
+				undef(1),
+				xfer(2),
+				create(3)
+				}
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+		"The type of the snapvault schedule."
+
+	::= { snapvaultSchedEntry 5 }
+
+
+	svSchedSchedule	OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+		"The update schedule of the snapvault."
+
+	::= { snapvaultSchedEntry 6 }
+
+	svDrPrimaryIsLicensed	OBJECT-TYPE
+	SYNTAX  	INTEGER {
+				false(1),
+				true(2)
+			}
+	ACCESS  	read-only
+	STATUS		mandatory
+	DESCRIPTION
+		"Whether the snapvault disaster recovery primary is
+		licensed on the filer."
+
+	::= { snapvault 14 }
+
+	-- -- -- -- -- -- -- --
+	--  the ndmpd group  --
+	-- -- -- -- -- -- -- --
+
+	ndmpOn			OBJECT-TYPE
+	SYNTAX			INTEGER { off(1), on(2) }
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+		"Indicates whether ndmpd has been turned on or not."
+	::= { ndmp 1 }
+
+	ndmpSessionOpened	OBJECT-TYPE
+	SYNTAX			INTEGER 
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+		"Total number of ndmpd sessions currently opened.
+		Sessions may be running backups, restores or neither."
+	::= { ndmp 2 }
+
+	ndmpBackupActive	OBJECT-TYPE
+	SYNTAX			INTEGER 
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+		"Number of ndmpd backups currently active."
+	::= { ndmp 3 }
+
+	ndmpRestoreActive	OBJECT-TYPE
+	SYNTAX			INTEGER 
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+		"Number of ndmpd restores currently active."
+	::= { ndmp 4 }
+
+	ndmpTapeActive		OBJECT-TYPE
+	SYNTAX			INTEGER 
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+		"Number of tape drives currently active."
+	::= { ndmp 5 }
+
+	ndmpBackupSuccesses	OBJECT-TYPE
+	SYNTAX			Counter 
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+		"Number of ndmpd backups that succeeded."
+	::= { ndmp 6 }
+
+	ndmpRestoreSuccesses	OBJECT-TYPE
+	SYNTAX			Counter 
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+		"Number of ndmpd restores that succeeded."
+	::= { ndmp 7 }
+
+	ndmpBackupFailures	OBJECT-TYPE
+	SYNTAX			Counter 
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+		"Number of ndmpd backups that failed."
+	::= { ndmp 8 }
+
+	ndmpRestoreFailures	OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+		"Number of ndmpd restores that failed."
+	::= { ndmp 9 }
+
+	ndmpBackupFailureReason	OBJECT-TYPE
+	SYNTAX			DisplayString
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+		"When the ndmpBackupFailures value is non-zero, this string
+		describes the reason for the most recent backup failure."
+	::= { ndmp 10 }
+
+	ndmpRestoreFailureReason	OBJECT-TYPE
+	SYNTAX			DisplayString
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+		"When the ndmpRestoreFailures value is non-zero, this string
+		describes the reason for the most recent restore failure."
+	::= { ndmp 11 }
+
+	-- -- -- -- -- -- -- --
+	--  the ftpd group  --
+	-- -- -- -- -- -- -- --
+
+	ftpdOn			OBJECT-TYPE
+	SYNTAX			INTEGER { off(1), on(2) }
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+		"Indicates whether ftpd has been turned on or not."
+	::= { ftpd 1 }
+
+ 	ftpdCurrentConns	OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Number of currently open TCP/IP connections to ftp daemon (active and idle)"
+	::= { ftpd 2 }
+
+ 	ftpdMaxConns		OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Number of maximum simultaneous TCP/IP connections to ftp daemon"
+	::= { ftpd 3 }
+
+ 	ftpdTotalConns		OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"Number of total TCP/IP connections to ftp daemon"
+	::= { ftpd 4 }
+
+	-- -- -- -- -- -- -- --
+	--  the fabric group  --
+	-- -- -- -- -- -- -- --
+
+	fabricInstances	OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"The number of distinct fabrics present."
+	::= { fabric 1 }
+
+	fabricTable	OBJECT-TYPE
+	SYNTAX		SEQUENCE OF FabricEntry
+	ACCESS		not-accessible
+	STATUS		mandatory
+	DESCRIPTION
+			"Provide a list of fabrics."
+	::= { fabric 2 }
+
+	fabricEntry	OBJECT-TYPE
+	SYNTAX		FabricEntry
+	ACCESS		not-accessible
+	STATUS		mandatory
+	DESCRIPTION
+			"Provide a report of current configuration and
+			status of fabrics."
+
+	INDEX	{ fabricIndex }
+	::= { fabricTable 1 }
+
+	FabricEntry ::=
+	    SEQUENCE {
+		fabricIndex
+		    INTEGER,
+		fabricStatus
+		    INTEGER,
+		fabricStatusMessage
+		    DisplayString,
+		fabricName
+		    OCTET STRING (SIZE (8)),
+		fabricOwner
+		    INTEGER
+	    }
+
+	fabricIndex	OBJECT-TYPE
+	SYNTAX		INTEGER (1..2147483647)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"A number that identifies this fabric entry."
+	::= { fabricEntry 1 }
+
+	fabricStatus	OBJECT-TYPE
+	SYNTAX		INTEGER {
+				ok(1),
+				faulty(2),
+				unknown(3)
+			}
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"This indicates the overall status of the SAN fabric(s)."
+	::= { fabricEntry 2 }
+
+	fabricStatusMessage	OBJECT-TYPE
+	SYNTAX			DisplayString
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"A string describing the fabric status,
+			including a description of the condition (if
+			any) that caused the status to be anything
+			other than ok(3)."
+	::= { fabricEntry 3 }
+
+	fabricName	OBJECT-TYPE
+	SYNTAX		OCTET STRING (SIZE (8))
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"This is the WWN of the fabric."
+	::= { fabricEntry 4 }
+
+	fabricOwner	OBJECT-TYPE
+	SYNTAX		INTEGER {
+				netapp(1),
+				other(2),
+				unknown(3)
+			}
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"This indicates who owns the management of
+			the fabric."
+	::= { fabricEntry 5 }
+
+	switchTable	OBJECT-TYPE
+	SYNTAX		SEQUENCE OF SwitchEntry
+	ACCESS		not-accessible
+	STATUS		mandatory
+	DESCRIPTION
+			"Provide a list of switches and hubs
+			connected to the fabric."
+	::= { fabric 3 }
+
+	switchEntry	OBJECT-TYPE
+	SYNTAX		SwitchEntry
+	ACCESS		not-accessible
+	STATUS		mandatory
+	DESCRIPTION
+			"Provide a report of current configuration and
+			status of fabric interconnect elements.  This
+			include switches and hubs."
+
+	INDEX	{ switchFabricIndex, switchIndex }
+	::= { switchTable 1 }
+
+	SwitchEntry ::=
+	    SEQUENCE {
+		switchIndex
+		    INTEGER,
+		switchName
+		    OCTET STRING (SIZE (8)),
+		switchSymbolicName
+		    OCTET STRING (SIZE (0..255)),
+		switchType
+		    INTEGER,
+		switchDomain
+		    INTEGER,
+		switchManagementId
+		    INTEGER,
+		switchStatus
+		    INTEGER,
+		switchStatusMessage
+		    DisplayString,
+		switchLinkSpeed
+		    INTEGER,
+		switchHighPacketsProcessed
+		    Counter,
+		switchLowPacketsProcessed
+		    Counter,
+		switchHighPacketsRejected
+		    Counter,
+		switchLowPacketsRejected
+		    Counter,
+		switchFabricIndex
+		    INTEGER
+	    }
+
+	switchIndex	OBJECT-TYPE
+	SYNTAX		INTEGER (1..2147483647)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"A number that identifies this switch entry."
+	::= { switchEntry 1 }
+
+	switchName	OBJECT-TYPE
+	SYNTAX		OCTET STRING (SIZE (8))
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"This is the WWN of the switch."
+	::= { switchEntry 2 }
+
+	switchSymbolicName OBJECT-TYPE
+	SYNTAX		OCTET STRING (SIZE (0..255))
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"This is the symbolic name of the switch."
+	::= { switchEntry 3 }
+
+	switchType	OBJECT-TYPE
+	SYNTAX		INTEGER {
+				hub(1),
+				switch(2),
+				unknown(3)
+			}
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The type of the switch."
+	::= { switchEntry 4 }
+
+	switchDomain	OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The domain identifier of the switch."
+	::= { switchEntry 5 }
+
+	switchManagementId OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The in-band management identifier of the switch."
+	::= { switchEntry 6 }
+
+	switchStatus	OBJECT-TYPE
+	SYNTAX		INTEGER {
+				other(1),
+				unknown(2),
+				ok(3),
+				nonCritical(4),
+				critical(5),
+				nonRecoverable(6)
+			}
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The current status of the switch."
+	::= { switchEntry 7 }
+
+	switchStatusMessage	OBJECT-TYPE
+	SYNTAX			DisplayString
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+			"A string describing the switch status,
+			including a description of the condition (if
+			any) that caused the status to be anything
+			other than ok(3)."
+	::= { switchEntry 8 }
+
+	switchLinkSpeed OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The link speed of the switch.  The value is an integer
+			whose units are Gbits (for example, a value of 2 represents
+			a link speed of 2 Gbit)."
+	::= { switchEntry 9 }
+
+	switchHighPacketsProcessed OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION	
+			"Number of Packets successfully processed
+			since the last reboot/reset of the switch.
+			This object returns the most
+			significant 32 bits of the 64 bit unsigned integer."
+	::= { switchEntry 10 }
+
+	switchLowPacketsProcessed OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION	
+			"Number of Packets successfully processed
+			since the last reboot/reset of the switch.
+			This object returns the least
+			significant 32 bits of the 64 bit unsigned integer."
+	::= { switchEntry 11 }
+
+	switchHighPacketsRejected OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION	
+			"Number of Packets rejected
+			since the last reboot/reset of the switch.
+			This object returns the most
+			significant 32 bits of the 64 bit unsigned integer."
+	::= { switchEntry 12 }
+
+	switchLowPacketsRejected OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION	
+			"Number of Packets rejected
+			since the last reboot/reset of the switch.
+			This object returns the least
+			significant 32 bits of the 64 bit unsigned integer."
+	::= { switchEntry 13 }
+
+	switchFabricIndex	OBJECT-TYPE
+	SYNTAX		INTEGER (1..2147483647)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION	
+			"The index of the fabric on which this switch
+			resides.  The value ranges from 1 to the value
+			of fabricInstances."
+	::= { switchEntry 14 }
+
+	portTable	OBJECT-TYPE
+	SYNTAX		SEQUENCE OF PortEntry
+	ACCESS		not-accessible
+	STATUS		mandatory
+	DESCRIPTION
+			"Provide a list of ports
+			connected to the fabric."
+	::= { fabric 4 }
+
+	portEntry	OBJECT-TYPE
+	SYNTAX		PortEntry
+	ACCESS		not-accessible
+	STATUS		mandatory
+	DESCRIPTION
+			"Provide a report of current configuration and
+			status of ports in the fabric."
+
+	INDEX	{ portFabricIndex, portSwitchIndex, portIndex }
+	::= { portTable 1 }
+
+	PortEntry ::=
+	    SEQUENCE {
+		portIndex
+		    INTEGER,
+		portName
+		    OCTET STRING (SIZE (8)),
+		portSwitchIndex
+		    INTEGER,
+		portSwitchName
+		    OCTET STRING (SIZE (8)),
+		portNumber
+		    INTEGER,
+		portType
+		    INTEGER,
+		portState
+		    INTEGER,
+		portFabricIndex
+		    INTEGER
+	    }
+
+	portIndex	OBJECT-TYPE
+	SYNTAX		INTEGER (1..2147483647)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"A number that identifies this port entry."
+	::= { portEntry 1 }
+
+	portName	OBJECT-TYPE
+	SYNTAX		OCTET STRING (SIZE (8))
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"This is the WWN of the port."
+	::= { portEntry 2 }
+
+	portSwitchIndex	OBJECT-TYPE
+	SYNTAX		INTEGER (1..2147483647)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION	
+			"The index of the switch on which this port
+			resides.  The value ranges from 1 to the number of
+			of switches."
+	::= { portEntry 3 }
+
+	portSwitchName	OBJECT-TYPE
+	SYNTAX		OCTET STRING (SIZE (8))
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"This is the WWN of the switch to which
+			the port is attached."
+	::= { portEntry 4 }
+
+	portNumber	OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The port number on the switch."
+	::= { portEntry 5 }
+
+	portType	OBJECT-TYPE
+	SYNTAX		INTEGER {
+				unidentified(1),
+				n-port(2),
+				nl-port(3),
+				f-port(4),
+				fl-port(5),
+				e-port(6),
+				b-port(7)
+			}
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The type of the port."
+	::= { portEntry 6 }
+
+	portState	OBJECT-TYPE
+	SYNTAX		INTEGER {
+				online(1),
+				offline(2),
+				testing(3),
+				faulty(4),
+				unknown(5)
+			}
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The current state of the port."
+	::= { portEntry 7 }
+
+	portFabricIndex	OBJECT-TYPE
+	SYNTAX		INTEGER (1..2147483647)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION	
+			"The index of the fabric on which this port
+			resides.  The value ranges from 1 to the value
+			of fabricInstances."
+	::= { portEntry 8 }
+
+	-- -- -- -- -- -- -- -- -- -- -- -- --
+	-- The backup(dump/restore) group   --
+	-- -- -- -- -- -- -- -- -- -- -- -- --
+
+	dump	OBJECT	IDENTIFIER ::= { backup 1 }
+
+	restore OBJECT	IDENTIFIER ::= { backup 2 }
+
+	-- dump --
+
+	dmpActives		OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+		"Number of active dump."
+	::= { dump 1 }
+
+	dmpAttempts		OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+		"Number of dump attempted."
+	::= { dump 2 }
+
+	dmpSuccesses		OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+		"Number of dump succeeded."
+	::= { dump 3 }
+
+	dmpFailures		OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+		"Number of dump failed."
+	::= { dump 4 }
+
+	dmpTable		OBJECT-TYPE
+	SYNTAX			SEQUENCE OF DmpSubtreeEntry
+	ACCESS			not-accessible
+	STATUS			mandatory
+	DESCRIPTION
+				"Provides a report of dumps on each
+				 dump subtree."
+	::= { dump 5 }
+
+	dmpSubtreeEntry		OBJECT-TYPE
+	SYNTAX			DmpSubtreeEntry
+	ACCESS			not-accessible
+	STATUS			mandatory
+	DESCRIPTION
+				"Shows statistics of dumps on an unique
+				 dump subtree."
+	INDEX	{ dmpIndex }
+	::= { dmpTable 1 }
+
+	DmpSubtreeEntry ::=
+	    SEQUENCE {
+	    	dmpIndex
+			INTEGER,
+	    	dmpStPath
+			DisplayString,
+		dmpStAttempts
+			Counter,
+		dmpStSuccesses
+			Counter,
+		dmpStFailures
+			Counter,
+		lastdump
+			OBJECT IDENTIFIER,
+		lastsuccess
+			OBJECT IDENTIFIER
+	    }
+
+	dmpIndex		OBJECT-TYPE
+	SYNTAX			INTEGER (1..2147483647)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"Index into the subtree dump table."
+	::= { dmpSubtreeEntry 1 }
+
+	dmpStPath		OBJECT-TYPE
+	SYNTAX			DisplayString
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The full path to the dump subtree. In the
+				 format of /vol/<volname>/..."
+	::= { dmpSubtreeEntry 2 }
+
+	dmpStAttempts		OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"No. of dump attempted for the subtree."
+	::= { dmpSubtreeEntry 3 }
+
+	dmpStSuccesses		OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"No. of dump succeeded for the subtree."
+	::= { dmpSubtreeEntry 4 }
+
+	dmpStFailures		OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"No. of dump failed for the subtree."
+	::= { dmpSubtreeEntry 5 }
+
+	lastdump	OBJECT IDENTIFIER ::= { dmpSubtreeEntry 6 }
+	lastsuccess	OBJECT IDENTIFIER ::= { dmpSubtreeEntry 7 }
+
+	dmpTime			OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The start time for the last attempt
+				 to dump the subtree, including the
+				 currently running one. The time in
+				 seconds since January 1, 1970."
+	::= { lastdump 1 }
+
+	dmpStatus		OBJECT-TYPE
+	SYNTAX			INTEGER { active(1), restartable(2), success(3), failed(4) }
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION		"The status for the last dump attempt
+				 on the subtree."
+	::= { lastdump 2 }
+
+	dmpLevel		OBJECT-TYPE
+	SYNTAX			INTEGER (0..9)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The level of the dump."
+	::= { lastsuccess 1 }
+
+	dmpNumFiles		OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The number of files dumped."
+	::= { lastsuccess 2 }
+
+	dmpDataAmount		OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The amount of data dumped, in Megabytes."
+	::= { lastsuccess 3 }
+
+	dmpStartTime		OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The start time of the dump. The time is
+				 in seconds since January 1, 1970."
+	::= { lastsuccess 4 }
+
+	dmpDuration		OBJECT-TYPE
+	SYNTAX			TimeTicks
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"The duration of the dump."
+	::= { lastsuccess 5 }
+		
+
+	-- restore --
+
+	rstActives		OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+		"Number of active restore."
+	::= { restore 1 }
+
+	rstAttempts		OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+		"Number of restore attempted."
+	::= { restore 2 }
+
+	rstSuccesses		OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+		"Number of restore succeeded."
+	::= { restore 3 }
+
+	rstFailures		OBJECT-TYPE
+	SYNTAX			Counter
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+		"Number of restore failed."
+	::= { restore 4 }
+
+	-- -- -- -- -- -- -- --
+	-- DAFS Option group --
+	-- -- -- -- -- -- -- --
+
+	dafsOptions		OBJECT IDENTIFIER ::= {dafs 1}
+	  
+	dafsIsLicensed	OBJECT-TYPE
+	SYNTAX  INTEGER {
+				false(1),
+				true(2)
+			}
+	ACCESS  read-only
+	STATUS  optional
+	DESCRIPTION
+		"Whether the dafs protocol is licensed on the filer.
+		Data OnTap Specific"
+	::= { dafsOptions 1 }
+
+	dafsMaxRequestsServer OBJECT-TYPE
+	SYNTAX	INTEGER
+	ACCESS	read-only
+	STATUS	optional
+	DESCRIPTION
+		"Server wide maximum number of concurrent requests
+		Data OnTap Specific"
+	::= { dafsOptions 2 }
+
+	dafsMaxRequests OBJECT-TYPE
+	SYNTAX	INTEGER
+	ACCESS	read-only
+	STATUS	optional
+	DESCRIPTION
+		"Server maximum number of concurrent requests per session
+		Data OnTap Specific"
+	::= { dafsOptions 3 }
+
+	dafsMaxRequestSize OBJECT-TYPE
+	SYNTAX	INTEGER
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Server maximum size of an inline request"
+	::= { dafsOptions 4 }
+
+	dafsMaxResponseSize OBJECT-TYPE
+	SYNTAX	INTEGER
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Server maximum size of an inline response"
+	::= { dafsOptions 5 }
+
+
+	dafsMaxPendingRequestsServer OBJECT-TYPE
+	SYNTAX	INTEGER
+	ACCESS	read-only
+	STATUS	optional
+	DESCRIPTION
+		"Server wide maximum number of requests that can queue
+		waiting for resources Data OnTap Specific"
+	::= { dafsOptions 6 }
+
+	dafsUseChecksums OBJECT-TYPE
+	SYNTAX	INTEGER	{
+				false(1),
+				true(2)
+			}
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Server uses checksums"
+	::= { dafsOptions 7 }
+
+	dafsNicNumRequestDemons OBJECT-TYPE
+	SYNTAX	INTEGER
+	ACCESS	read-only
+	STATUS	optional
+	DESCRIPTION
+		"Server default number of request demons per Nic.
+		Data OnTap Specific"
+	::= { dafsOptions 8 }
+
+	dafsAnonymousAuthentication OBJECT-TYPE
+	SYNTAX	INTEGER	{
+				false(1),
+				true(2)
+			}
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Allow the server to acception connections with
+		authentication type NONE."
+	::= { dafsOptions 9 }
+
+	dafsServerEnabled OBJECT-TYPE
+	SYNTAX	INTEGER	{
+				false(1),
+				true(2)
+			}
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Current status of the DAFS server. If true, the DAFS
+		server is running."
+	::= { dafsOptions 10 }
+
+	dafsDefaultUid OBJECT-TYPE
+	SYNTAX	INTEGER	
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Default client User ID if anonymously connected."
+	::= { dafsOptions 11 }
+
+	dafsDefaultGid OBJECT-TYPE
+	SYNTAX	INTEGER	
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Default client Group ID if anonymously connected."
+	::= { dafsOptions 12 }
+
+	dafsMaxDisconnectedSessions OBJECT-TYPE
+	SYNTAX	INTEGER	
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Maximum number of disconnected sessions for which the
+		DAFS server will retain response cache data."
+	::= { dafsOptions 13 }
+
+        dafsMaxIdleSeconds OBJECT-TYPE
+        SYNTAX  INTEGER
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "Maximum number of seconds server will keep a session
+                open without hearing from the client."
+        ::= { dafsOptions 14 }
+
+	-- the DAFS VI Nic table
+
+	-- The DAFS VI Nic table contains information about this
+	-- entity's VI nics attached to DAFS
+
+	dafsNicTable OBJECT-TYPE
+	SYNTAX	SEQUENCE OF DafsNicEntry
+	ACCESS	not-accessible
+	STATUS	mandatory
+	DESCRIPTION
+                      "A table containing DAFS NIC specific
+                      information."
+       	::= { dafs 2 }
+
+	dafsNicEntry OBJECT-TYPE
+	SYNTAX	DafsNicEntry
+	ACCESS	not-accessible
+	STATUS	mandatory
+	DESCRIPTION
+                      "Information about a particular current DAFS
+                      nic.  An object of this type is transient,
+                      in that it ceases to exist when (or soon after)
+                      the nic is detached."
+	INDEX   { dafsNicIndex }
+              ::= { dafsNicTable 1 }
+
+	DafsNicEntry ::=
+	SEQUENCE	{
+			dafsNicIndex
+				INTEGER,
+			dafsNicName
+				DisplayString,
+			dafsNicDevice
+				DisplayString,
+			dafsNicState
+				INTEGER,
+			dafsNicListenAddr
+				OCTET STRING,
+			dafsNicNumRqstDemons
+				INTEGER,
+			dafsNicInBytes
+				Counter,
+			dafsNicDirectInBytes
+				Counter,
+			dafsNicOutBytes
+				Counter,
+			dafsNicDirectOutBytes
+				Counter
+			}
+
+	dafsNicIndex OBJECT-TYPE
+	SYNTAX	INTEGER (1..2147483647)
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+                      "A unique value for each interface.  Its value
+                      ranges between 1 and the value of DafsNicNumber.  The
+                      value for each interface must remain constant at
+                      least from one re-initialization of the entity's
+                      network management system to the next re-
+                      initialization."
+	::= { dafsNicEntry 1 }
+
+	dafsNicName OBJECT-TYPE
+	SYNTAX	DisplayString (SIZE (0..255))
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+                      "A textual string containing the logical name 
+                      under which the nic has been attached."
+	::= { dafsNicEntry 2}
+
+	dafsNicDevice OBJECT-TYPE
+	SYNTAX	DisplayString (SIZE (0..255))
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+                      "A textual string containing the physical name
+                      of the nic that has been attached."
+	::= { dafsNicEntry 3}
+
+	dafsNicState OBJECT-TYPE
+	SYNTAX	INTEGER	{
+				up(1), 	-- ready to pass packets
+				down(2),
+				testing(3) -- in some test mode
+			}
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Current state of DAFS nic"
+	::= { dafsNicEntry 4 }
+
+	dafsNicListenAddr OBJECT-TYPE
+	SYNTAX	OCTET STRING
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+                      "Transport specific address structure giving the
+		      DAFS listen address for this NIC."
+	::= { dafsNicEntry 5}
+
+
+	dafsNicNumRqstDemons OBJECT-TYPE
+	SYNTAX	INTEGER
+	ACCESS	read-only
+	STATUS	optional
+	DESCRIPTION
+                      "Number of request demons assigned to this Nic
+		      to handle Nic related events. Data OnTap Specific"
+	::= { dafsNicEntry 6}
+
+	dafsNicInBytes OBJECT-TYPE
+	SYNTAX	Counter
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+                      "Total number of bytes, include DMA, received on
+		      this interface"
+	::= { dafsNicEntry 7}
+
+	dafsNicDirectInBytes OBJECT-TYPE
+	SYNTAX	Counter
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+                      "Total number of bytes read directly from the
+		      peer memory through this interface"
+	::= { dafsNicEntry 8}
+
+	dafsNicOutBytes OBJECT-TYPE
+	SYNTAX	Counter
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+                      "Total number of bytes, include DMA, sent on
+		      this interface"
+	::= { dafsNicEntry 9}
+
+	dafsNicDirectOutBytes OBJECT-TYPE
+	SYNTAX	Counter
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+                      "Total number of bytes written directly to the
+		      peer memory through this interface"
+	::= { dafsNicEntry 10}
+
+	-- -- -- -- -- -- -- -- -- --
+	-- DAFS Server Statistics  --
+	-- -- -- -- -- -- -- -- -- --
+
+	curDafs	OBJECT IDENTIFIER ::= {dafs 3}
+
+	dafsPendingRequests	OBJECT-TYPE
+	SYNTAX	INTEGER
+	ACCESS	read-only
+	STATUS	optional
+	DESCRIPTION
+		"Server wide current number of requests that are
+		queued waiting for resources Data OnTap Specific"
+	::= { curDafs 1 }
+
+	dafsCurrentRequests	OBJECT-TYPE
+	SYNTAX	INTEGER
+	ACCESS	read-only
+	STATUS	optional
+	DESCRIPTION
+		"Server wide current number of active requests
+		Data OnTap Specific"
+	::= { curDafs 2 }
+
+	totDafs	OBJECT IDENTIFIER ::= {dafs 4}
+
+	dafsCalls OBJECT-TYPE
+	SYNTAX	Counter
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Total number of DAFS calls since last reboot"
+	::= { totDafs 1 }
+
+	dafsClientAuths	OBJECT-TYPE
+	SYNTAX	Counter
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Total number of Client Auth calls since last reboot"
+	::= { totDafs 2 }
+
+	dafsClientConnects	OBJECT-TYPE
+	SYNTAX	Counter
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Total number of Client Connect calls since last reboot"
+	::= { totDafs 3 }
+
+	dafsClientConnectAuths	OBJECT-TYPE
+	SYNTAX	Counter
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Total number of Client Connect Auth calls since last reboot"
+	::= { totDafs 4 }
+
+	dafsConnectBinds	OBJECT-TYPE
+	SYNTAX	Counter
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Total number of Connect Bind calls since last reboot"
+	::= { totDafs 5 }
+
+	dafsDisconnects	OBJECT-TYPE
+	SYNTAX	Counter
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Total number of Disconnect calls since last reboot"
+	::= { totDafs 6 }
+
+	dafsRegisterCreds	OBJECT-TYPE
+	SYNTAX	Counter
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Total number of Register Credential calls since last reboot"
+	::= { totDafs 7 }
+
+	dafsReleaseCreds	OBJECT-TYPE
+	SYNTAX	Counter
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Total number of Release Credential calls since last reboot"
+	::= { totDafs 8 }
+
+	dafsSecinfos	OBJECT-TYPE
+	SYNTAX	Counter
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Total number of Secinfo calls since last reboot"
+	::= { totDafs 9 }
+
+	dafsServerAuths	OBJECT-TYPE
+	SYNTAX	Counter
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Total number of Server Auth calls since last reboot"
+	::= { totDafs 10 }
+
+	dafsCheckResponses	OBJECT-TYPE
+	SYNTAX	Counter
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Total number of Check Response calls since last reboot"
+	::= { totDafs 11 }
+
+	dafsFetchResponses	OBJECT-TYPE
+	SYNTAX	Counter
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Total number of Fetch Response calls since last reboot"
+	::= { totDafs 12 }
+
+	dafsDiscardResponses	OBJECT-TYPE
+	SYNTAX	Counter
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Total number of Discard Responses calls since last reboot"
+	::= { totDafs 13 }
+
+	dafsAccesses	OBJECT-TYPE
+	SYNTAX	Counter
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Total number of Access calls since last reboot"
+	::= { totDafs 14 }
+
+	dafsCacheHints	OBJECT-TYPE
+	SYNTAX	Counter
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Total number of Cache Hint calls since last reboot"
+	::= { totDafs 15 }
+
+	dafsCloses	OBJECT-TYPE
+	SYNTAX	Counter
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Total number of Close calls since last reboot"
+	::= { totDafs 16 }
+
+	dafsCommits	OBJECT-TYPE
+	SYNTAX	Counter
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Total number of Commit calls since last reboot"
+	::= { totDafs 17 }
+
+	dafsCreates	OBJECT-TYPE
+	SYNTAX	Counter
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Total number of Create calls since last reboot"
+	::= { totDafs 18 }
+
+	dafsDelegPurges	OBJECT-TYPE
+	SYNTAX	Counter
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Total number of Delegate Purge calls since last reboot"
+	::= { totDafs 19 }
+
+	dafsDelegReturns	OBJECT-TYPE
+	SYNTAX	Counter
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Total number of Delegate Return calls since last reboot"
+	::= { totDafs 20 }
+
+	dafsGetFsattrs	OBJECT-TYPE
+	SYNTAX	Counter
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Total number of Get Fsattr  calls since last reboot"
+	::= { totDafs 21 }
+
+	dafsGetRootHandles	OBJECT-TYPE
+	SYNTAX	Counter
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Total number of Get Root Handle calls since last reboot"
+	::= { totDafs 22 }
+
+	dafsGetattrInlines	OBJECT-TYPE
+	SYNTAX	Counter
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Total number of Getattr Inline calls since last reboot"
+	::= { totDafs 23 }
+
+	dafsGetattrDirects	OBJECT-TYPE
+	SYNTAX	Counter
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Total number of Getattr Direct calls since last reboot"
+	::= { totDafs 24 }
+
+	dafsLinks	OBJECT-TYPE
+	SYNTAX	Counter
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Total number of Link calls since last reboot"
+	::= { totDafs 25 }
+
+	dafsLocks	OBJECT-TYPE
+	SYNTAX	Counter
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Total number of Lock calls since last reboot"
+	::= { totDafs 26 }
+
+	dafsLockts	OBJECT-TYPE
+	SYNTAX	Counter
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Total number of LockT calls since last reboot"
+	::= { totDafs 27}
+
+	dafsLockus	OBJECT-TYPE
+	SYNTAX	Counter
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Total number of LockU calls since last reboot"
+	::= { totDafs 28 }
+
+	dafsLookUps	OBJECT-TYPE
+	SYNTAX	Counter
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Total number of LookUp calls since last reboot"
+	::= { totDafs 29 }
+
+	dafsLookUpps	OBJECT-TYPE
+	SYNTAX	Counter
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Total number of LookUpp calls since last reboot"
+	::= { totDafs 30 }
+
+	dafsNulls	OBJECT-TYPE
+	SYNTAX	Counter
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Total number of Null calls since last reboot"
+	::= { totDafs 31 }
+
+	dafsNverifys	OBJECT-TYPE
+	SYNTAX	Counter
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Total number of Nverify calls since last reboot"
+	::= { totDafs 32 }
+
+	dafsOpens	OBJECT-TYPE
+	SYNTAX	Counter
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Total number of Open calls since last reboot"
+	::= { totDafs 33 }
+
+	dafsOpenDowngrades	OBJECT-TYPE
+	SYNTAX	Counter
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Total number of Open Downgrade calls since last reboot"
+	::= { totDafs 34 }
+
+	dafsOpenattrs	OBJECT-TYPE
+	SYNTAX	Counter
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Total number of Openattr calls since last reboot"
+	::= { totDafs 35 }
+
+	dafsReadInlines	OBJECT-TYPE
+	SYNTAX	Counter
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Total number of Read Inline calls since last reboot"
+	::= { totDafs 36 }
+
+	dafsReadDirects	OBJECT-TYPE
+	SYNTAX	Counter
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Total number of Read Direct calls since last reboot"
+	::= { totDafs 37 }
+
+	dafsReaddirInlines	OBJECT-TYPE
+	SYNTAX	Counter
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Total number of Readdir Inline calls since last reboot"
+	::= { totDafs 38 }
+
+	dafsReaddirDirects	OBJECT-TYPE
+	SYNTAX	Counter
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Total number of Readdir Direct calls since last reboot"
+	::= { totDafs 39 }
+
+	dafsReadlinkInlines	OBJECT-TYPE
+	SYNTAX	Counter
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Total number of Readlink Inline calls since last reboot"
+	::= { totDafs 40 }
+
+	dafsReadlinkDirects	OBJECT-TYPE
+	SYNTAX	Counter
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Total number of Readlink Direct calls since last reboot"
+	::= { totDafs 41 }
+
+	dafsRemoves	OBJECT-TYPE
+	SYNTAX	Counter
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Total number of Remove calls since last reboot"
+	::= { totDafs 42 }
+
+	dafsRenames	OBJECT-TYPE
+	SYNTAX	Counter
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Total number of Rename calls since last reboot"
+	::= { totDafs 43 }
+
+	dafsSetattrInlines	OBJECT-TYPE
+	SYNTAX	Counter
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Total number of Setattr Inline calls since last reboot"
+	::= { totDafs 44 }
+
+	dafsSetattrDirects	OBJECT-TYPE
+	SYNTAX	Counter
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Total number of Setattr Direct calls since last reboot"
+	::= { totDafs 45 }
+
+	dafsVerifys	OBJECT-TYPE
+	SYNTAX	Counter
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Total number of Verify calls since last reboot"
+	::= { totDafs 46 }
+
+	dafsBatchSubmits	OBJECT-TYPE
+	SYNTAX	Counter
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Total number of Batch Submit calls since last reboot"
+	::= { totDafs 47 }
+
+	dafsWriteInlines	OBJECT-TYPE
+	SYNTAX	Counter
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Total number of Write Inline calls since last reboot"
+	::= { totDafs 48 }
+
+	dafsWriteDirects	OBJECT-TYPE
+	SYNTAX	Counter
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Total number of Write Direct calls since last reboot"
+	::= { totDafs 49 }
+
+	dafsBcGetattrs	OBJECT-TYPE
+	SYNTAX	Counter
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Total number of BC Getattr calls since last reboot"
+	::= { totDafs 50 }
+
+	dafsBcNulls	OBJECT-TYPE
+	SYNTAX	Counter
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Total number of BC Null calls since last reboot"
+	::= { totDafs 51 }
+
+	dafsBcRecalls	OBJECT-TYPE
+	SYNTAX	Counter
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Total number of BC Recall calls since last reboot"
+	::= { totDafs 52 }
+
+	dafsBcBatchCompletions	OBJECT-TYPE
+	SYNTAX	Counter
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Total number of BC Batch Completion calls since
+		last reboot"
+	::= { totDafs 53 }
+
+        dafsAppendInlines     OBJECT-TYPE
+        SYNTAX  Counter
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "Total number of Append Inline calls since
+                last reboot"
+        ::= { totDafs 54 }
+
+        dafsAppendDirects     OBJECT-TYPE
+        SYNTAX  Counter
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "Total number of Append Direct calls since
+                last reboot"
+        ::= { totDafs 55 }
+
+        dafsGetFencingLists     OBJECT-TYPE
+        SYNTAX  Counter
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "Total number of Get Fencing List calls since
+                last reboot"
+        ::= { totDafs 56 }
+
+        dafsSetFencingLists     OBJECT-TYPE
+        SYNTAX  Counter
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "Total number of Set Fencing List calls since
+                last reboot"
+        ::= { totDafs 57 }
+
+        dafsHurryUps     OBJECT-TYPE
+        SYNTAX  Counter
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "Total number of Hurry Up calls since
+                last reboot"
+        ::= { totDafs 58 }
+
+	dafsInBytes	OBJECT-TYPE
+	SYNTAX	Counter
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Total number of bytes, including DMA, received since the
+		last reboot"
+	::= { totDafs 59 }
+
+	dafsDirectInBytes	OBJECT-TYPE
+	SYNTAX	Counter
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Total number of bytes received directly into memory
+		since last reboot"
+	::= { totDafs 60 }
+
+	dafsOutBytes	OBJECT-TYPE
+	SYNTAX	Counter
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Total number of bytes, including DMA, sent since the
+		last reboot"
+	::= { totDafs 61 }
+
+	dafsDirectOutBytes	OBJECT-TYPE
+	SYNTAX	Counter
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Total number of bytes sent directly into remote memory since
+		the last reboot"
+	::= { totDafs 62 }
+
+	dafsSessionTable OBJECT-TYPE
+	SYNTAX	SEQUENCE OF DafsSessionEntry
+	ACCESS	not-accessible
+	STATUS	mandatory
+	DESCRIPTION
+                      "A table containing current DAFS client session
+                      information."
+       	::= { dafs 5 }
+
+	dafsSessionEntry OBJECT-TYPE
+	SYNTAX	DafsSessionEntry
+	ACCESS	not-accessible
+	STATUS	mandatory
+	DESCRIPTION
+                      "Information about a particular DAFS
+                      session.  An object of this type is transient,
+                      in that it ceases to exist when (or soon after)
+                      the client disconnects."
+                      
+	INDEX   { dafsSessionIndex }
+        ::= { dafsSessionTable 1 }
+
+	DafsSessionEntry ::=
+            SEQUENCE {
+			dafsSessionIndex
+				INTEGER,
+			dafsSessionId
+				OCTET STRING,
+			dafsSessionEndian
+				INTEGER,
+			dafsSessionAllowBackChannel
+				INTEGER,
+			dafsSessionAllowRdmaReadChannel
+				INTEGER,
+			dafsSessionUseChecksums
+				INTEGER,
+			dafsSessionMaxCredentials
+				INTEGER,
+			dafsSessionMaxRequestSize
+				INTEGER,
+			dafsSessionMaxResponseSize
+				INTEGER,
+			dafsSessionMaxRequests
+				INTEGER,
+			dafsSessionInlineWriteHeaderSize
+				INTEGER,
+			dafsSessionClientIdString
+				OCTET STRING,
+			dafsSessionClientVerifier
+				OCTET STRING,
+			dafsSessionNumCredentials
+				INTEGER,
+			dafsSessionNumRequests
+				INTEGER
+	    }
+
+	dafsSessionIndex OBJECT-TYPE
+	SYNTAX	INTEGER (1..2147483647)
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+                      "A unique value for each session."
+	::= { dafsSessionEntry 1 }
+
+	dafsSessionId	OBJECT-TYPE
+	SYNTAX	OCTET STRING
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Session Identifier assigned by the server."
+	::= { dafsSessionEntry 2 }
+
+	dafsSessionEndian	OBJECT-TYPE
+	SYNTAX	INTEGER {
+	    			bigEndian(1),
+				littleEndian(2)
+	    		}
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Byte order used on this session."
+	::= { dafsSessionEntry 3 }
+
+	dafsSessionAllowBackChannel	OBJECT-TYPE
+	SYNTAX	INTEGER {
+				false(1),
+				true(2)
+			}
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Session may use a back control channel."
+	::= { dafsSessionEntry 4 }
+
+	dafsSessionAllowRdmaReadChannel	OBJECT-TYPE
+	SYNTAX	INTEGER {
+				false(1),
+				true(2)
+			}
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Session may use a RDMA read channel."
+	::= { dafsSessionEntry 5 }
+
+	dafsSessionUseChecksums	OBJECT-TYPE
+	SYNTAX	INTEGER {
+				false(1),
+				true(2)
+			}
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Session uses checksums."
+	::= { dafsSessionEntry 6 }
+
+	dafsSessionMaxCredentials	OBJECT-TYPE
+	SYNTAX	INTEGER
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Maximum number of credientials that can be registered
+		on this session."
+	::= { dafsSessionEntry 7 }
+
+	dafsSessionMaxRequestSize	OBJECT-TYPE
+	SYNTAX	INTEGER
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Maximum size of a DAFS request."
+	::= { dafsSessionEntry 8 }
+
+	dafsSessionMaxResponseSize	OBJECT-TYPE
+	SYNTAX	INTEGER
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Maximum size of a DAFS response."
+	::= { dafsSessionEntry 9 }
+
+	dafsSessionMaxRequests	OBJECT-TYPE
+	SYNTAX	INTEGER
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Maximum number of concurrent requests."
+	::= { dafsSessionEntry 10 }
+
+	dafsSessionInlineWriteHeaderSize	OBJECT-TYPE
+	SYNTAX	INTEGER
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Size of DAFS headers plus padding to the start of
+		data.  Used to better align inline data."
+	::= { dafsSessionEntry 11 }
+
+	dafsSessionClientIdString	OBJECT-TYPE
+	SYNTAX	OCTET STRING (SIZE (32))
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Client ID string supplied by the client.  Intended to
+		uniquely identify that client."
+	::= { dafsSessionEntry 12 }
+
+	dafsSessionClientVerifier	OBJECT-TYPE
+	SYNTAX	OCTET STRING (SIZE (8))
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Supplied by the client to uniquely identify an
+		instnce of a client."
+	::= { dafsSessionEntry 13 }
+
+	dafsSessionNumCredentials	OBJECT-TYPE
+	SYNTAX	INTEGER
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Current number of credentials registered on this
+		session"
+	::= { dafsSessionEntry 14 }
+
+	dafsSessionNumRequests	OBJECT-TYPE
+	SYNTAX	INTEGER
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Current number of active requests on this session"
+	::= { dafsSessionEntry 15 }
+
+	-- the DAFS Export table
+
+	-- The DAFS Export table contains information about this
+	-- entity's exported filesystems
+
+	dafsExportTable OBJECT-TYPE
+	SYNTAX	SEQUENCE OF DafsExportEntry
+	ACCESS	not-accessible
+	STATUS	mandatory
+	DESCRIPTION
+                      "A table containing DAFS Export filesystems."
+       	::= { dafs 6 }
+
+	dafsExportEntry OBJECT-TYPE
+	SYNTAX	DafsExportEntry
+	ACCESS	not-accessible
+	STATUS	mandatory
+	DESCRIPTION
+                      "Information about a particular current DAFS
+                      export.  An object of this type is transient,
+                      in that it ceases to exist when (or soon after)
+                      the export is deleted."
+	INDEX   { dafsExportIndex }
+              ::= { dafsExportTable 1 }
+
+	DafsExportEntry ::=
+	SEQUENCE	{
+			dafsExportIndex
+				INTEGER,
+			dafsExportName
+				DisplayString,
+			dafsExportPath
+				DisplayString,
+			dafsExportEnabled
+				INTEGER,
+			dafsExportRwMode
+				INTEGER,
+			dafsExportAccessList
+				DisplayString
+			}
+
+	dafsExportIndex OBJECT-TYPE
+	SYNTAX	INTEGER (1..2147483647)
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+                      "A unique value for each export.  Its value
+                      ranges between 1 and the number of exports.  The
+                      value for each export must remain constant at
+                      least from one re-initialization of the entity's
+                      network management system to the next re-
+                      initialization."
+	::= { dafsExportEntry 1 }
+
+	dafsExportName OBJECT-TYPE
+	SYNTAX	DisplayString (SIZE (0..255))
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+                      "A textual string containing information about the
+                      export.  This is the logical export name."
+	::= { dafsExportEntry 2}
+
+	dafsExportPath OBJECT-TYPE
+	SYNTAX	DisplayString (SIZE (0..255))
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+                      "A textual string containing information about the
+                      export.  This is the local filesystem path to
+		      the export."
+	::= { dafsExportEntry 3}
+
+	dafsExportEnabled OBJECT-TYPE
+	SYNTAX	INTEGER	{
+				false(1),
+				true(2)
+			}
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"This export is available for access."
+	::= { dafsExportEntry 4 }
+
+	dafsExportRwMode OBJECT-TYPE
+	SYNTAX	INTEGER	{
+				readwrite(1),
+				readmostly(2),
+				readonly(3)
+			}
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+		"Global export mode. This represents the maximum
+		access rights."
+	::= { dafsExportEntry 5 }
+
+	dafsExportAccessList OBJECT-TYPE
+	SYNTAX	DisplayString (SIZE (0..255))
+	ACCESS	read-only
+	STATUS	mandatory
+	DESCRIPTION
+                      "A textual string containing information about the
+                      export.  This is the list of hosts that may
+		      access the export. If empty, all hosts may
+		      access the export."
+	::= { dafsExportEntry 6 }
+
+--------------------------
+-- VI interface statistics
+--------------------------
+
+    viaNodeConnection OBJECT IDENTIFIER ::= { vi 1 }
+
+    viaNodeSystemName   OBJECT-TYPE
+    SYNTAX    DisplayString(SIZE (0..255))
+    ACCESS    read-only
+    STATUS    mandatory
+    DESCRIPTION
+        "A string by which the node is identified in the cluster."
+    ::= { viaNodeConnection 1 }
+
+    viaCreated OBJECT-TYPE
+    SYNTAX    INTEGER
+    ACCESS    read-only
+    STATUS    mandatory
+    DESCRIPTION    
+        "The number of VIs created."
+    ::= { viaNodeConnection 2 }
+
+    viaConnectRequest OBJECT-TYPE
+    SYNTAX    Counter
+    ACCESS    read-only
+    STATUS    mandatory
+    DESCRIPTION    
+        "The number of times Connect Request call is made."
+    ::= { viaNodeConnection 3 }
+
+    viaConnectWait OBJECT-TYPE
+    SYNTAX    Counter
+    ACCESS    read-only
+    STATUS    mandatory
+    DESCRIPTION    
+        "The number of times Connect wait call is made." 
+    ::= { viaNodeConnection 4 }
+
+    viaDisconnect OBJECT-TYPE
+    SYNTAX    Counter
+    ACCESS    read-only
+    STATUS    mandatory
+    DESCRIPTION    
+        "Number of times VI got disconnected with out any error."
+    ::= { viaNodeConnection 5 }
+
+    viaConnectTimeOut OBJECT-TYPE
+    SYNTAX    Counter
+    ACCESS    read-only
+    STATUS    mandatory
+    DESCRIPTION    
+        "Number of times VI connect request got timed out."
+    ::= { viaNodeConnection 6 }
+
+    viaConnected OBJECT-TYPE
+    SYNTAX    Counter
+    ACCESS    read-only
+    STATUS    mandatory
+    DESCRIPTION    
+        "Number of time VI got connected with out any error."
+    ::= { viaNodeConnection 7 }
+
+    viaCurrConnectPending OBJECT-TYPE
+    SYNTAX    Gauge
+    ACCESS    read-only
+    STATUS    mandatory
+    DESCRIPTION    
+        "The number of VIs for which connect request is pending."
+    ::= { viaNodeConnection 8 }
+
+    viaCurrConnectWaitPending OBJECT-TYPE
+    SYNTAX    Gauge
+    ACCESS    read-only
+    STATUS    mandatory
+    DESCRIPTION    
+        "The number of VIs for which connect wait request is pending." 
+    ::= { viaNodeConnection 9 }
+
+    viaCurrConnected OBJECT-TYPE
+    SYNTAX    Gauge
+    ACCESS    read-only
+    STATUS    mandatory
+    DESCRIPTION    
+        "The number of VIs for which the current state is CONNECTED."
+    ::= { viaNodeConnection 10 }
+
+    viaCurrError OBJECT-TYPE
+    SYNTAX    Gauge
+    ACCESS    read-only
+    STATUS    mandatory
+    DESCRIPTION    
+        "The number of VIs for which the current state is ERROR"
+    ::= { viaNodeConnection 11 }
+
+    viaTotalError OBJECT-TYPE
+    SYNTAX    Counter
+    ACCESS    read-only
+    STATUS    mandatory
+    DESCRIPTION    
+        "The number of VIs which encountered error state."
+    ::= { viaNodeConnection 12 }
+
+    viaInMsgs OBJECT-TYPE
+    SYNTAX    Counter
+    ACCESS    read-only
+    STATUS    mandatory
+    DESCRIPTION    
+        "The total number of incoming Messages received."
+    ::= { viaNodeConnection 13 }
+
+    viaInRdma OBJECT-TYPE
+    SYNTAX    Counter
+    ACCESS    read-only
+    STATUS    mandatory
+    DESCRIPTION    
+        "The total number of incoming RDMA requests received."
+    ::= { viaNodeConnection 14 }
+
+    viaInBytes OBJECT-TYPE
+    SYNTAX    Counter
+    ACCESS    read-only
+    STATUS    mandatory
+    DESCRIPTION    
+        "The total number of incoming bytes received, including those 
+        received in error. This count includes bytes received on 
+        currently established connections. This corresponds to the sum
+        of bytes received through received messages, incoming RDMA writes 
+        and RDMA reads issued"
+    ::= { viaNodeConnection 15 }
+
+    viaInRDMAReadBytes OBJECT-TYPE
+    SYNTAX    Counter
+    ACCESS    read-only
+    STATUS    mandatory
+    DESCRIPTION   
+        "The total number of incoming bytes received through RDMA read, 
+        including those received in error. This count includes bytes 
+        received on currently established connections."
+    ::= { viaNodeConnection 16 }
+
+    viaInRDMAWriteBytes OBJECT-TYPE
+    SYNTAX    Counter
+    ACCESS    read-only
+    STATUS    mandatory
+    DESCRIPTION   
+        "The total number of bytes received through incoming RDMA writes, 
+        including those received in error. This count includes bytes 
+        received on currently established connections."
+    ::= { viaNodeConnection 17 }
+
+    viaOutMsgs OBJECT-TYPE
+    SYNTAX    Counter
+    ACCESS    read-only
+    STATUS    mandatory
+    DESCRIPTION    
+        "The total number of Messages sent."
+    ::= { viaNodeConnection 18 }
+
+    viaOutRdma OBJECT-TYPE
+    SYNTAX    Counter
+    ACCESS    read-only
+    STATUS    mandatory
+    DESCRIPTION    
+        "The total number of RDMA requests sent."
+    ::= { viaNodeConnection 19 }
+
+    viaOutBytes OBJECT-TYPE
+    SYNTAX    Counter
+    ACCESS    read-only
+    STATUS    mandatory
+    DESCRIPTION    
+        "The total number of bytes sent, including those 
+        sent in error. This count includes bytes sent on 
+        currently established connections."
+    ::= { viaNodeConnection 20 }
+
+    viaOutRDMAReadBytes OBJECT-TYPE
+    SYNTAX    Counter
+    ACCESS    read-only
+    STATUS    mandatory
+    DESCRIPTION
+        "The total number of bytes sent through an incoming 
+        RDMA read request, including those sent in error. 
+        This count includes bytes sent on currently established 
+        connections."
+    ::= { viaNodeConnection 21 }
+
+    viaOutRDMAWriteBytes OBJECT-TYPE
+    SYNTAX    Counter
+    ACCESS    read-only
+    STATUS    mandatory
+    DESCRIPTION
+        "The total number of bytes sent through a RDMA write
+        operation, including those sent in error. This count 
+        includes bytes sent on currently established connections."
+    ::= { viaNodeConnection 22 }
+
+
+    viaConnTable OBJECT-TYPE
+    SYNTAX    SEQUENCE OF ViaConnEntry
+    ACCESS    not-accessible
+    STATUS    mandatory
+    DESCRIPTION
+        "A table containing via connection specific information."
+    ::= { viaNodeConnection 23 }        
+
+    viaConnEntry OBJECT-TYPE
+    SYNTAX    ViaConnEntry
+    ACCESS    not-accessible
+    STATUS    mandatory
+    DESCRIPTION    
+        "A conceptual row of the viaConnTable containing information
+        about a particular current via connection. Each row of this
+        table is transient, and it ceases to exist when the 
+        connection makes transition to the CLOSED state."
+     INDEX    { viaConnVINumber 
+    }
+     ::= { viaConnTable 1 }
+
+ViaConnEntry  ::= SEQUENCE {
+
+    viaConnState                 INTEGER,
+    viaConnVINumber              INTEGER,
+    viaConnRemoteNetAddress      IpAddress,
+    viaConnLocalNetAddress       IpAddress,
+    viaConnRemotePortNumber      INTEGER,
+    viaConnLocalPortNumber       INTEGER,
+    viaConnLocalDescriminator    OCTET STRING,
+    viaConnRemoteDescriminator   OCTET STRING,
+    viaConnLocalMaxTransferSize  INTEGER,
+    viaConnRemoteMaxTransferSize INTEGER,
+    viaConnLocalEnableRdmaWrite  INTEGER,
+    viaConnLocalEnableRdmaRead   INTEGER,
+    viaConnRemoteEnableRdmaWrite INTEGER,
+    viaConnRemoteEnableRdmaRead  INTEGER,
+    viaConnSentMessages          Counter,
+    viaConnSentRdmaReadMessages  Counter,
+    viaConnSentRdmaWriteMessages Counter,
+    viaConnRcvdMessages          Counter,
+    viaConnRcvdRdmaReadMessages  Counter,
+    viaConnRcvdRdmaWriteMessages Counter
+
+    }
+
+    viaConnState OBJECT-TYPE
+    SYNTAX   INTEGER {
+         idle (1),
+         pendingConnect(2),
+         connected(3),
+         error(4)
+         }                  
+    ACCESS             read-only
+    STATUS             mandatory
+    DESCRIPTION             
+            "The state of this via connection
+             Legal States:
+                   Idle            1 
+                   Pending Connect 2
+                   Connected       3
+                   Error           4"
+    ::= { viaConnEntry 1 }
+
+    viaConnVINumber    OBJECT-TYPE
+    SYNTAX        INTEGER (1..2147483647)
+    ACCESS        read-only
+    STATUS        mandatory
+    DESCRIPTION
+        "A number which uniquely defines a     connection."
+    ::= { viaConnEntry 2 }
+
+    viaConnRemoteNetAddress    OBJECT-TYPE
+    SYNTAX        IpAddress
+    ACCESS        read-only
+    STATUS        mandatory
+    DESCRIPTION
+        "IP address of the remote system of the connection."
+    ::= { viaConnEntry 3 }
+
+    viaConnLocalNetAddress OBJECT-TYPE
+    SYNTAX      IpAddress
+    ACCESS      read-only
+    STATUS      mandatory
+    DESCRIPTION
+        "Local IPadress of the connection."
+    ::= { viaConnEntry 4 }
+
+    viaConnRemotePortNumber    OBJECT-TYPE
+    SYNTAX        INTEGER
+    ACCESS        read-only
+    STATUS        mandatory
+    DESCRIPTION
+        "Remote TCP portnumber of the connection."
+    ::= { viaConnEntry 5 }
+
+    viaConnLocalPortNumber    OBJECT-TYPE
+    SYNTAX        INTEGER
+    ACCESS        read-only
+    STATUS        mandatory
+    DESCRIPTION
+        "Local TCP Portnumber of the connection."
+    ::= { viaConnEntry 6 }
+
+    viaConnLocalDescriminator    OBJECT-TYPE
+    SYNTAX        OCTET STRING
+    ACCESS        read-only
+    STATUS        mandatory
+    DESCRIPTION
+        "An identifier used by the local process to identify the
+        VI connection."
+    ::= { viaConnEntry 7 }
+
+    viaConnRemoteDescriminator    OBJECT-TYPE
+    SYNTAX        OCTET STRING    
+    ACCESS        read-only
+    STATUS        mandatory
+    DESCRIPTION
+        "An identifier used by the remote process to identify the
+        VI connection."
+    ::= { viaConnEntry 8 }
+
+    viaConnLocalMaxTransferSize    OBJECT-TYPE
+    SYNTAX        INTEGER
+    ACCESS        read-only
+    STATUS        mandatory
+    DESCRIPTION
+        "The local limit on the maximum packet size that can be 
+        transfered through the connection."
+    ::= { viaConnEntry 9 }
+
+    viaConnRemoteMaxTransferSize OBJECT-TYPE
+    SYNTAX        INTEGER
+    ACCESS        read-only
+    STATUS        mandatory
+    DESCRIPTION
+        "The remote limit on the maximum packet size that can be 
+        transfered through the connection."
+    ::= { viaConnEntry 10 }
+
+    viaConnLocalEnableRdmaWrite    OBJECT-TYPE
+    SYNTAX        INTEGER
+    ACCESS        read-only
+    STATUS        mandatory
+    DESCRIPTION
+            "The value is 1 if remote DMA write is enabled
+            in the local system otherwise, it is 0."
+    ::= { viaConnEntry 11 }
+
+    viaConnLocalEnableRdmaRead    OBJECT-TYPE
+    SYNTAX        INTEGER
+    ACCESS        read-only
+    STATUS        mandatory
+    DESCRIPTION
+            "The value is 1 if remote DMA read is enabled
+            in the local system otherwise, it is 0."
+    ::= { viaConnEntry 12 }
+
+    viaConnRemoteEnableRdmaWrite    OBJECT-TYPE
+    SYNTAX        INTEGER
+    ACCESS        read-only
+    STATUS        mandatory
+    DESCRIPTION
+            "The value is 1 if remote DMA write is enabled
+            in the remote system otherwise, it is 0."
+    ::= { viaConnEntry 13 }
+
+    viaConnRemoteEnableRdmaRead    OBJECT-TYPE
+    SYNTAX        INTEGER
+    ACCESS        read-only
+    STATUS        mandatory
+    DESCRIPTION
+            "The value is 1 if remote DMA read is enabled
+            in the remote system otherwise, it is 0."
+    ::= { viaConnEntry 14 }
+
+    viaConnSentMessages    OBJECT-TYPE
+    SYNTAX        Counter
+    ACCESS        read-only
+    STATUS        mandatory
+    DESCRIPTION
+            "Total number of messages sent through the connection."
+    ::= { viaConnEntry 15 }
+
+    viaConnSentRdmaReadMessages    OBJECT-TYPE
+    SYNTAX        Counter
+    ACCESS        read-only
+    STATUS        mandatory
+    DESCRIPTION
+            "Total number of rdma read messages sent through the 
+            connection."
+    ::= { viaConnEntry 16 }
+
+    viaConnSentRdmaWriteMessages    OBJECT-TYPE
+    SYNTAX        Counter
+    ACCESS        read-only
+    STATUS        mandatory
+    DESCRIPTION
+            "Total number of rdma write messages sent through the 
+            connection."
+    ::= { viaConnEntry 17 }
+
+    viaConnRcvdMessages    OBJECT-TYPE
+    SYNTAX        Counter
+    ACCESS        read-only
+    STATUS        mandatory
+    DESCRIPTION
+            "Total number of messages received through the connection."
+    ::= { viaConnEntry 18 }
+
+    viaConnRcvdRdmaReadMessages    OBJECT-TYPE
+    SYNTAX        Counter
+    ACCESS        read-only
+    STATUS        mandatory
+    DESCRIPTION
+            "Total number of rdma read messages received through the 
+            connection."
+    ::= { viaConnEntry 19 }
+
+    viaConnRcvdRdmaWriteMessages    OBJECT-TYPE
+    SYNTAX        Counter
+    ACCESS        read-only
+    STATUS        mandatory
+    DESCRIPTION
+            "Total number of rdma write messages received through the 
+            connection."
+    ::= { viaConnEntry 20 }
+
+    viaErrors OBJECT IDENTIFIER ::= { vi 2 }
+
+    viaErrPostDesc        OBJECT-TYPE
+    SYNTAX          Counter
+    ACCESS          read-only
+    STATUS          mandatory
+    DESCRIPTION
+            "The total number of descriptors completed in error
+            by NIC."
+    ::= { viaErrors 1 }
+
+    viaErrConnLost        OBJECT-TYPE
+    SYNTAX          Counter
+    ACCESS          read-only
+    STATUS          mandatory
+    DESCRIPTION
+            "The total number of Lost Connection errors. "
+    ::= { viaErrors 2 }
+
+    viaErrRecvQEmpty    OBJECT-TYPE
+    SYNTAX          Counter
+    ACCESS          read-only
+    STATUS          mandatory
+    DESCRIPTION
+            "The total number of errors due to an empty receive Queue. "
+    ::= { viaErrors 3 }
+
+    viaErrRdmawProt        OBJECT-TYPE
+    SYNTAX          Counter
+    ACCESS          read-only
+    STATUS          mandatory
+    DESCRIPTION
+            "The total number of remote DMA write protection errors. "
+    ::= { viaErrors 4 }
+
+    viaErrRdmarProt        OBJECT-TYPE
+    SYNTAX          Counter
+    ACCESS          read-only
+    STATUS          mandatory
+    DESCRIPTION
+            "The total number of remote DMA read protection errors. "
+    ::= { viaErrors 5 }
+
+    viaErrCompProt    OBJECT-TYPE
+    SYNTAX          Counter
+    ACCESS          read-only
+    STATUS          mandatory
+    DESCRIPTION
+            "The total number of protection errors. "
+    ::= { viaErrors 6 }
+
+    viaErrorThreshold OBJECT-TYPE
+    SYNTAX            INTEGER
+    ACCESS            read-write
+    STATUS            mandatory
+    DESCRIPTION
+        "Setting this threshold will cause a trap to be enabled
+        such that if the total error exceeds error threshold set 
+        a viaNodeErrorsTrap trap will be generated."
+    ::= { viaErrors 7 }    
+
+    viaNicAttributes OBJECT IDENTIFIER ::= { vi 3 }
+
+    viaNicTable        OBJECT-TYPE
+    SYNTAX            SEQUENCE OF ViaNicEntry
+    ACCESS            not-accessible
+    STATUS            mandatory
+    DESCRIPTION
+            "A table containing via NIC-specific information."
+    ::= { viaNicAttributes 1}
+
+    viaNicEntry        OBJECT-TYPE
+    SYNTAX            ViaNicEntry
+    ACCESS            not-accessible
+    STATUS            mandatory
+    DESCRIPTION
+            "A conceptual row of the viaNicTable containing information
+            about a particular present VINic."
+
+    INDEX    {    viaNicIndex }
+    ::= { viaNicTable 1 }
+
+    ViaNicEntry ::= SEQUENCE {
+            viaNicIndex               INTEGER,
+            viaName                   DisplayString,
+            viaHardwareVersion        DisplayString,
+            viaProviderVersion        DisplayString,
+            viaNicAddress             PhysAddress,
+            viaThreadSafe             INTEGER,
+            viaMaxDiscriminatorLength INTEGER,
+            viaMaxRegisterBytes       INTEGER,
+            viaMaxRegisterRegions     INTEGER,
+            viaMaxRegisterBlockBytes  INTEGER,
+            viaMaxVI                  INTEGER,
+            viaMaxDescriptorsPerQueue INTEGER,
+            viaMaxSegmentsPerDesc     INTEGER,
+            viaMaxCQ                  INTEGER,
+            viaMaxCQEntries           INTEGER,
+            viaMaxTransferSize        INTEGER,
+            viaNativeMTU              INTEGER,
+            viaMaxPTags               INTEGER,
+            viaCurrRegisterBytes      INTEGER,
+            viaCurrRegisterRegions    INTEGER,
+            viaCurrVI                 INTEGER,
+            viaCurrCQ                 INTEGER,
+            viaCurrPTags              INTEGER,
+            viaConnectionListenPort   INTEGER
+    }
+
+    viaNicIndex        OBJECT-TYPE
+    SYNTAX        INTEGER (1..2147483647)
+    ACCESS        read-only
+    STATUS        mandatory
+    DESCRIPTION
+        "The index of the NIC in the NIC table."
+    ::= { viaNicEntry 1 }
+
+    viaName            OBJECT-TYPE
+    SYNTAX        DisplayString (SIZE (0..255))
+    ACCESS        read-only
+    STATUS        mandatory
+    DESCRIPTION
+        "The symbolic name of the NIC device."
+    ::= { viaNicEntry 2 }
+
+    viaHardwareVersion    OBJECT-TYPE
+    SYNTAX        DisplayString (SIZE (0..255))
+    ACCESS        read-only
+    STATUS        mandatory
+    DESCRIPTION
+        "The version of the VINIC described by this MIB."
+    ::= { viaNicEntry 3 }
+
+    viaProviderVersion    OBJECT-TYPE
+    SYNTAX        DisplayString (SIZE (0..255))
+    ACCESS        read-only
+    STATUS        mandatory
+    DESCRIPTION
+        "The version of the VI provider."
+    ::= { viaNicEntry 4 }
+
+    viaNicAddress    OBJECT-TYPE
+    SYNTAX        PhysAddress
+    ACCESS        read-only
+    STATUS        mandatory
+    DESCRIPTION
+        "The Network address of this NIC."
+    ::= { viaNicEntry 5 }
+
+    viaThreadSafe    OBJECT-TYPE
+    SYNTAX       INTEGER
+    ACCESS       read-only
+    STATUS       mandatory
+    DESCRIPTION
+        "1 if synchronisation model is thread safe else 0."
+    ::= { viaNicEntry 6 }
+
+    viaMaxDiscriminatorLength    OBJECT-TYPE
+    SYNTAX        INTEGER
+    ACCESS        read-only
+    STATUS        mandatory
+    DESCRIPTION
+        "The maximum number of bytes that the VI provider allows
+        for a connection descriminator."
+    ::= { viaNicEntry 7 }
+
+    viaMaxRegisterBytes    OBJECT-TYPE
+    SYNTAX        INTEGER
+    ACCESS        read-only
+    STATUS        mandatory
+    DESCRIPTION
+        "Maximum number of bytes that can be registered."
+    ::= { viaNicEntry 8 }
+
+    viaMaxRegisterRegions    OBJECT-TYPE
+    SYNTAX        INTEGER
+    ACCESS        read-only
+    STATUS        mandatory
+    DESCRIPTION
+        "Maximum number of memory regions that can be registered."
+    ::= { viaNicEntry 9 }
+
+    viaMaxRegisterBlockBytes    OBJECT-TYPE
+    SYNTAX        INTEGER
+    ACCESS        read-only
+    STATUS        mandatory
+    DESCRIPTION
+        "Largest contiguous block of memory that can be registered."
+    ::= { viaNicEntry 10 }
+
+    viaMaxVI        OBJECT-TYPE
+    SYNTAX        INTEGER
+    ACCESS        read-only
+    STATUS        mandatory
+    DESCRIPTION
+        "The limit on the total number of VI instances this entity can
+        support."
+    ::= { viaNicEntry 11 }
+
+    viaMaxDescriptorsPerQueue    OBJECT-TYPE
+    SYNTAX        INTEGER
+    ACCESS        read-only
+    STATUS        mandatory
+    DESCRIPTION
+        "Maximum Descriptors per VI Work Queue that this VI provider
+        can support."
+    ::= { viaNicEntry 12 }
+
+    viaMaxSegmentsPerDesc    OBJECT-TYPE
+    SYNTAX        INTEGER
+    ACCESS        read-only
+    STATUS        mandatory
+    DESCRIPTION
+        "Maximum number of segments per descriptor that this VI provider
+        can support."
+    ::= { viaNicEntry 13 }
+
+    viaMaxCQ        OBJECT-TYPE
+    SYNTAX        INTEGER
+    ACCESS        read-only
+    STATUS        mandatory
+    DESCRIPTION
+        "Maximum number of completion queues this VI provider can support."
+    ::= { viaNicEntry 14 }
+
+    viaMaxCQEntries        OBJECT-TYPE
+    SYNTAX        INTEGER
+    ACCESS        read-only
+    STATUS        mandatory
+    DESCRIPTION
+        "Maximum number of Completion queue entries per completion queue
+        that this VI provider can support."
+    ::= { viaNicEntry 15 }
+
+    viaMaxTransferSize    OBJECT-TYPE
+    SYNTAX        INTEGER
+    ACCESS        read-only
+    STATUS        mandatory
+    DESCRIPTION
+        "The maximum transfer size supported by the VI Nic. The maximum 
+        transfer size is the amount of data that can be described by a 
+        single VI descriptor."
+    ::= { viaNicEntry 16 }
+
+    viaNativeMTU    OBJECT-TYPE
+    SYNTAX        INTEGER
+    ACCESS        read-only
+    STATUS        mandatory
+    DESCRIPTION
+        "The native MTU size of the underlying network. For frame-based 
+        networks, this could reflect its native frame size. For cell-based 
+        networks, it could reflect the MTU of the appropriate abstraction 
+        layer that it supports."
+    ::= { viaNicEntry 17 }
+
+    viaMaxPTags        OBJECT-TYPE
+    SYNTAX        INTEGER
+    ACCESS        read-only
+    STATUS        mandatory
+    DESCRIPTION
+        "The maximum number of protection tags that are supported by this
+        VI provider."
+    ::= { viaNicEntry 18 }
+
+   viaCurrRegisterBytes    OBJECT-TYPE
+       SYNTAX        INTEGER
+       ACCESS        read-only
+       STATUS        mandatory
+       DESCRIPTION
+           "Number of bytes registered by the VI user for this
+           NIC."
+       ::= { viaNicEntry 19 }
+
+   viaCurrRegisterRegions    OBJECT-TYPE
+       SYNTAX        INTEGER
+       ACCESS        read-only
+       STATUS        mandatory
+       DESCRIPTION
+           "Number of memory regions that is registered by VI user
+           for this NIC."
+       ::= { viaNicEntry 20 }
+
+   viaCurrVI        OBJECT-TYPE
+       SYNTAX        INTEGER
+       ACCESS        read-only
+       STATUS        mandatory
+       DESCRIPTION
+           "The current number of VI instances for this NIC."
+       ::= { viaNicEntry 21 }
+
+   viaCurrCQ        OBJECT-TYPE
+       SYNTAX        INTEGER
+       ACCESS        read-only
+       STATUS        mandatory
+       DESCRIPTION
+           "Current number of completion queues this VI provider
+           has."
+       ::= { viaNicEntry 22 }
+
+   viaCurrPTags      OBJECT-TYPE
+       SYNTAX        INTEGER
+       ACCESS        read-only
+       STATUS        mandatory
+       DESCRIPTION
+           "Current Number of protection tags this VI provider has."
+       ::= { viaNicEntry 23 }
+
+    viaConnectionListenPort        OBJECT-TYPE
+    SYNTAX        INTEGER
+    ACCESS        read-only
+    STATUS        mandatory
+    DESCRIPTION
+        "Port number on which VI server is listening for VI connection
+        request."
+    ::= { viaNicEntry 24 }
+
+
+        -- -- -- -- -- -- -- --
+	-- VFILER group --
+	-- -- -- -- -- -- -- --
+	vfilerIsLicensed   OBJECT-TYPE
+        SYNTAX          INTEGER {
+	                             false(1),
+                                     true(2)
+                                }
+	ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION     
+                        "Whether vfiler  is licensed on the
+			filer."
+        ::= { vfiler 1 }
+
+	vfFilers     OBJECT-TYPE
+        SYNTAX          Counter
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                      "Number of vfilers in the physical Filer."
+        ::= { vfiler 2 }
+
+        vfTable        OBJECT-TYPE
+	SYNTAX          SEQUENCE OF VfEntry
+	ACCESS          not-accessible
+	STATUS          mandatory
+	DESCRIPTION 
+		     "Provide a report of pre-vfiler general information "
+	::= { vfiler 3 }
+
+	vfEntry        OBJECT-TYPE
+        SYNTAX          VfEntry
+        ACCESS          not-accessible
+        STATUS          mandatory
+        DESCRIPTION
+                     "Provide a report of per-vfiler information"
+ 	INDEX   { vfIndex}
+        ::= { vfTable 1 }
+
+        VfEntry ::=
+       	     SEQUENCE {
+	       	 vfIndex
+		 	INTEGER,
+		 vfName	
+		 	DisplayString,
+                 vfUuid
+                        OCTET STRING (SIZE (0..36)),
+                 vfIpAddresses
+                        INTEGER,
+                 vfStoragePaths
+                        INTEGER,
+		 vfIpSpace	
+		 	DisplayString,
+		 vfAllowedProtocols
+		 	INTEGER,
+		 vfDisallowedProtocols
+		 	INTEGER,
+		 vfState
+		 	INTEGER		       
+      	     }
+
+	vfIndex         OBJECT-TYPE
+        SYNTAX          INTEGER (1..2147483647)
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                     "A number that identifies this entry for the referenced vfiler."
+        ::= { vfEntry 1 }
+
+
+	vfName      OBJECT-TYPE
+        SYNTAX          DisplayString
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                      " A textual string that contains the name of the referenced vfiler."
+        ::= { vfEntry 2 }
+
+        vfUuid		OBJECT-TYPE
+        SYNTAX		OCTET STRING (SIZE (0..36))
+        ACCESS		read-only
+        STATUS		mandatory
+
+        DESCRIPTION
+                      "The UUID of the referenced vfiler."
+        ::= { vfEntry 3 }
+
+	vfIpAddresses	OBJECT-TYPE
+	SYNTAX          INTEGER 
+	ACCESS          read-only
+	STATUS          mandatory
+	DESCRIPTION
+	               "The total number of IP addresses for the referenced vfiler."
+        ::= { vfEntry 4 }
+
+
+        vfStoragePaths	OBJECT-TYPE
+	SYNTAX          INTEGER 
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                       "The total number of storage paths for the referenced vfiler."
+        ::= { vfEntry 5 }
+
+        vfIpSpace      OBJECT-TYPE
+        SYNTAX          DisplayString
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                      " A textual string that contains the name of the ipspace that the referenced vfiler belongs to."
+        ::= { vfEntry 6 }
+
+        vfAllowedProtocols	OBJECT-TYPE
+        SYNTAX          INTEGER 
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                       "Total number of protocols allowed for the referenced vfiler."
+        ::= { vfEntry 7 }
+
+        vfDisallowedProtocols	OBJECT-TYPE
+        SYNTAX          INTEGER 
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                       "Total number of protocols disallowed for the referenced vfiler."
+        ::= { vfEntry 8 }
+
+        vfState		OBJECT-TYPE
+	SYNTAX   INTEGER {
+         stopped (1),
+         running (2)
+         }                  
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                       "Status of the vfiler: Running or stopped."
+        ::= { vfEntry 9 }
+
+	vfIpTable        OBJECT-TYPE
+	SYNTAX          SEQUENCE OF VfIpEntry
+	ACCESS          not-accessible
+	STATUS          mandatory
+	DESCRIPTION 
+			"Provide a report of per-vfiler IP addresses information "
+        ::= { vfiler 4 }
+
+        vfIpEntry        OBJECT-TYPE
+	SYNTAX          VfIpEntry
+	ACCESS          not-accessible
+	STATUS          mandatory
+	DESCRIPTION
+	                "Provide a report of per-vfiler IP addresses information"
+        INDEX   { vfFiIndex, vfIpIndex }
+        ::= { vfIpTable 1 }
+
+        VfIpEntry ::=
+ 	    SEQUENCE {
+        	vfFiIndex
+		          INTEGER,
+                vfIpIndex
+			  INTEGER,
+	   	vfIpAddr
+	                  IpAddress
+            }
+        
+        vfFiIndex         OBJECT-TYPE
+      	SYNTAX          INTEGER (1..2147483647)
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                     "A number that identifies the referenced vfiler."
+        ::= { vfIpEntry 1 }
+
+        vfIpIndex         OBJECT-TYPE
+        SYNTAX          INTEGER (1..2147483647)
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                     "A number that identifies which IP address in the referenced vfiler."
+        ::= { vfIpEntry 2 }
+
+        vfIpAddr         OBJECT-TYPE
+        SYNTAX          IpAddress
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                      "A IP address for the referenced vfiler."
+        ::= { vfIpEntry 3 }
+
+        vfSpTable        OBJECT-TYPE
+        SYNTAX          SEQUENCE OF VfSpEntry
+        ACCESS          not-accessible
+        STATUS          mandatory
+        DESCRIPTION 
+                       "Provide a report of per-vfiler storage path information "
+        ::= { vfiler 5 }
+
+        vfSpEntry        OBJECT-TYPE
+        SYNTAX          VfSpEntry
+        ACCESS          not-accessible
+        STATUS          mandatory
+        DESCRIPTION
+                       "Provide a report of per-vfiler storage path information"
+        INDEX   { vfFsIndex, vfSpIndex }
+        ::= { vfSpTable 1 }
+
+        VfSpEntry ::=
+            SEQUENCE {
+                vfFsIndex
+                          INTEGER,
+                vfSpIndex
+                          INTEGER,
+                vfSpName
+	                  OCTET STRING (SIZE (0..1024))
+	    }
+
+        vfFsIndex         OBJECT-TYPE
+        SYNTAX          INTEGER (1..2147483647)
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                     "A number that identifies the referenced vfiler."
+        ::= { vfSpEntry 1 }
+
+        vfSpIndex         OBJECT-TYPE
+        SYNTAX          INTEGER (1..2147483647)
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                     "A number that identifies which storage path in the referenced vfiler."
+        ::= { vfSpEntry 2 }
+
+        vfSpName         OBJECT-TYPE
+        SYNTAX         	OCTET STRING (SIZE (0..1024)) 
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                      "The storage path name  for the referenced vfiler."
+        ::= { vfSpEntry 3 }
+
+
+        vfProTable        OBJECT-TYPE
+	SYNTAX          SEQUENCE OF VfProEntry
+        ACCESS          not-accessible
+        STATUS          mandatory
+        DESCRIPTION
+                       "Provide a report of per-vfiler protocol information "
+        ::= { vfiler 6 }
+
+        vfProEntry        OBJECT-TYPE
+        SYNTAX          VfProEntry
+        ACCESS          not-accessible
+        STATUS          mandatory
+        DESCRIPTION
+                       "Provide a report of per-vfiler protocol information"
+        INDEX   { vfFpIndex, vfProIndex }
+        ::= { vfProTable 1 }
+
+        VfProEntry ::=
+            SEQUENCE {
+       	        vfFpIndex
+	                   INTEGER,
+                vfProIndex
+                           INTEGER,
+                vfProName
+                           OCTET STRING (SIZE (0..1024)),
+		vfProStatus
+			   INTEGER
+	    }
+
+        vfFpIndex         OBJECT-TYPE
+        SYNTAX          INTEGER (1..2147483647)
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                     "A number that identifies the referenced vfiler."
+        ::= { vfProEntry 1 }
+
+        vfProIndex         OBJECT-TYPE
+	SYNTAX          INTEGER (1..2147483647)
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                     "A number that identifies a protocol in the referenced vfiler."
+        ::= { vfProEntry 2 }
+
+        vfProName         OBJECT-TYPE
+        SYNTAX          OCTET STRING (SIZE (0..1024))
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                      "A textual string that contains the protocol name  for the referenced vfiler."
+        ::= { vfProEntry 3 }
+
+        vfProStatus	OBJECT-TYPE
+        SYNTAX		INTEGER {
+					false(1),
+					true(2)
+			}
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+			"Whether the referenced vfiler protocol  is allowed or disallowed."
+        ::= { vfProEntry 4 }
+
+        -- -- -- -- -- -- -- --
+	-- Block access protocols group --
+	-- -- -- -- -- -- -- --
+	fcpIsLicensed   OBJECT-TYPE
+        SYNTAX          INTEGER {
+	                             false(1),
+                                     true(2)
+                                }
+	ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION     
+                        "Whether FCP access protocols are licensed on the
+			filer."
+        ::= { blocks 1 }
+
+	iscsiIsLicensed   OBJECT-TYPE
+        SYNTAX          INTEGER {
+	                             false(1),
+                                     true(2)
+                                }
+	ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION     
+                        "Whether iSCSI access protocols are licensed on the
+			filer."
+        ::= { blocks 2 }
+
+	fcpLowReadBytes	OBJECT-TYPE
+	SYNTAX		Counter
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+			"The total number of bytes read via FCP  
+			since the last boot.  This object returns the 
+			least significant 32 bits of the 64 bit unsigned 
+			integer."
+	::= { blocks 3 }
+
+	fcpHighReadBytes	OBJECT-TYPE
+	SYNTAX		Counter
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+			"The total number of bytes read via FCP  
+			since the last boot.  This object returns the 
+			most significant 32 bits of the 64 bit unsigned 
+			integer."
+	::= { blocks 4 }
+
+
+	fcpLowWriteBytes	OBJECT-TYPE
+	SYNTAX		Counter
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+			"The total number of bytes written via FCP  
+			since the last boot.  This object returns the 
+			least significant 32 bits of the 64 bit unsigned 
+			integer."
+	::= { blocks 5 }
+
+
+	fcpHighWriteBytes	OBJECT-TYPE
+	SYNTAX		Counter
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+			"The total number of bytes written via FCP  
+			since the last boot.  This object returns the 
+			most significant 32 bits of the 64 bit unsigned 
+			integer."
+	::= { blocks 6 }
+
+
+	iscsiLowReadBytes	OBJECT-TYPE
+	SYNTAX		Counter
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+			"The total number of bytes read via iSCSI  
+			since the last boot.  This object returns the 
+			least significant 32 bits of the 64 bit unsigned 
+			integer."
+	::= { blocks 7 }
+
+
+	iscsiHighReadBytes	OBJECT-TYPE
+	SYNTAX		Counter
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+			"The total number of bytes read via iSCSI  
+			since the last boot.  This object returns the 
+			most significant 32 bits of the 64 bit unsigned 
+			integer."
+	::= { blocks 8 }
+
+
+	iscsiLowWriteBytes	OBJECT-TYPE
+	SYNTAX		Counter
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+			"The total number of bytes written via iSCSI  
+			since the last boot.  This object returns the 
+			least significant 32 bits of the 64 bit unsigned 
+			integer."
+	::= { blocks 9 }
+
+
+	iscsiHighWriteBytes	OBJECT-TYPE
+	SYNTAX		Counter
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+			"The total number of bytes written via iSCSI  
+			since the last boot.  This object returns the 
+			most significant 32 bits of the 64 bit unsigned 
+			integer."
+	::= { blocks 10 }
+
+
+	iscsiHighOps 	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The total number of iSCSI ops handled since the
+			last boot.  This object returns the most significant
+			32 bits of the 64 bit unsigned integer."
+	::= {blocks 11}
+
+	iscsiLowOps 	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The total number of iSCSI ops handled since the
+			last boot.  This object returns the least significant
+			32 bits of the 64 bit unsigned integer."
+	::= {blocks 12}
+
+	fcpHighOps 	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The total number of FCP ops handled since the
+			last boot.  This object returns the most significant
+			32 bits of the 64 bit unsigned integer."
+	::= {blocks 13}
+
+	fcpLowOps 	OBJECT-TYPE
+	SYNTAX		Counter
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The total number of FCP ops handled since the
+			last boot.  This object returns the least significant
+			32 bits of the 64 bit unsigned integer."
+	::= {blocks 14}
+
+
+	lun		OBJECT IDENTIFIER ::= {blocks 15 }
+	
+	lunCount	OBJECT-TYPE
+        SYNTAX          INTEGER
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                      "Number of LUNs in the Filer."
+        ::= { lun 1 }
+
+	lunTable	OBJECT-TYPE
+	SYNTAX		SEQUENCE OF LunEntry
+	ACCESS		not-accessible
+	STATUS		mandatory
+	DESCRIPTION
+			"Provide a report of per-LUN general information "
+	::= {lun 2}
+
+	lunEntry	OBJECT-TYPE
+	SYNTAX		LunEntry
+	ACCESS		not-accessible
+	STATUS		mandatory
+	DESCRIPTION	
+			"Provide a report of per-LUN information"
+	INDEX	{ lunIndex}
+	::= { lunTable 1 }
+
+	LunEntry ::=
+	    SEQUENCE {
+		lunIndex INTEGER,
+		lunName DisplayString,
+		lunComment DisplayString,
+		lunSizeLow INTEGER,
+		lunSizeHigh INTEGER,
+		lunMapped INTEGER,
+		lunSerialNumber DisplayString,
+		lunQtreeName DisplayString,
+		lunHighOps Counter,
+		lunLowOps Counter,
+		lunHighReadBytes Counter,
+		lunLowReadBytes Counter,
+		lunHighWriteBytes Counter,
+		lunLowWriteBytes Counter,
+		lunHighErrors Counter,
+		lunLowErrors Counter,
+		lunOnline INTEGER,
+		lunSnapStatus	INTEGER,
+		lunShareStatus INTEGER,
+		lunSpaceReserved INTEGER,
+		lunStatsResetTime INTEGER,
+		lunHighReadOps Counter,
+		lunLowReadOps Counter,
+		lunHighWriteOps Counter,
+		lunLowWriteOps Counter,
+		lunHighOtherOps Counter,
+		lunLowOtherOps Counter
+		}
+
+	lunIndex      OBJECT-TYPE
+        SYNTAX          INTEGER (1..2147483647)
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                     "A number that identifies the referenced LUN."
+        ::= { lunEntry 1 }
+
+	lunName      OBJECT-TYPE
+        SYNTAX          DisplayString
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                      "The name of the LUN.  This is also the path to the LUN
+		      on the filer."
+        ::= { lunEntry 2 }	
+
+	lunComment      OBJECT-TYPE
+        SYNTAX          DisplayString
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                      "The comment, if any, for this LUN."
+        ::= { lunEntry 3 }	
+
+	lunSizeLow	OBJECT-TYPE
+        SYNTAX		INTEGER
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                     "Size of the LUN in bytes.  This object returns the 
+		     least significant 32 bits of the 64 bit unsigned integer."
+        ::= { lunEntry 4 }
+
+	lunSizeHigh	OBJECT-TYPE
+        SYNTAX		INTEGER
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                     "Size of the LUN in bytes.  This object returns the 
+		     most significant 32 bits of the 64 bit unsigned integer."
+        ::= { lunEntry 5 }
+
+	lunMapped   OBJECT-TYPE
+        SYNTAX          INTEGER {
+                                     false(1),
+                                     true(2)
+                                }
+ 
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                     "This LUN has been mapped to at least one initiator group."
+        ::= { lunEntry 6 }
+	
+	lunSerialNumber   OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+		    "The 12 character SCSI serial number of the LUN."
+	::= { lunEntry 7 }
+
+
+	lunQtreeName   OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+		    "A string that indicates which qtree this LUN belongs to."
+	::= { lunEntry 8 }
+
+	lunHighOps	OBJECT-TYPE
+        SYNTAX		Counter
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+			"The total number of Target side SCSI ops for 
+			this LUN since the stats were last reset.  This object 
+			returns the most significant 32 bits of the 64 bit 
+			unsigned integer."
+	::= { lunEntry 9}
+
+	lunLowOps	OBJECT-TYPE
+        SYNTAX		Counter
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+			"The total number of Target side SCSI ops for 
+			this LUN since the stats were last reset.  This object 
+			returns the least significant 32 bits of the 64 bit 
+			unsigned integer."
+	::= { lunEntry 10 }
+
+	lunHighReadBytes	OBJECT-TYPE
+        SYNTAX		Counter
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+			"The total number of bytes read from this LUN 
+			since the stats were last reset.  This object returns 
+			the most significant 32 bits of the 64 bit unsigned 
+			integer."
+	::= { lunEntry 11 }
+
+	lunLowReadBytes	OBJECT-TYPE
+        SYNTAX		Counter
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+			"The total number of bytes read from this LUN 
+			since the stats were last reset.  This object returns 
+			the least significant 32 bits of the 64 bit unsigned 
+			integer."
+	::= { lunEntry 12 }
+
+	
+	lunHighWriteBytes	OBJECT-TYPE
+        SYNTAX		Counter
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+			"The total number of bytes written to this LUN 
+			since the stats were last reset.  This object returns 
+			the most significant 32 bits of the 64 bit unsigned 
+			integer."
+	::= { lunEntry 13 }
+
+	lunLowWriteBytes	OBJECT-TYPE
+        SYNTAX		Counter
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+			"The total number of bytes written to this LUN 
+			since the stats were last reset.  This object returns 
+			the least significant 32 bits of the 64 bit unsigned 
+			integer."
+	::= { lunEntry 14 }
+
+	lunHighErrors	OBJECT-TYPE
+        SYNTAX		Counter
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+			"The total number of errors seen on this LUN 
+			since the stats were last reset.  This object 
+			returns the most significant 32 bits of the 64 bit 
+			unsigned integer."
+	::= { lunEntry 15 }
+
+	lunLowErrors	OBJECT-TYPE
+        SYNTAX		Counter
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+			"The total number of errors seen on this LUN 
+			since the stats were last reset.  This object 
+			returns the least significant 32 bits of the 64 bit 
+			unsigned integer."
+	::= { lunEntry 16 }
+
+	lunOnline	OBJECT-TYPE
+	SYNTAX		INTEGER {
+				    false(1),
+				    true(2)
+				}
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"Whether the LUN is online."
+	::= { lunEntry 17 }
+
+	lunSnapStatus	OBJECT-TYPE
+	SYNTAX		INTEGER {
+				    false(1),
+				    true(2)
+				}
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"Whether a snapshot of this LUN can be taken."
+	::= { lunEntry 18 }
+
+	
+	lunShareStatus	OBJECT-TYPE
+	SYNTAX		INTEGER {
+				    none(1),
+				    read(2),
+				    write(3),
+				    all(4)
+				}
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"The sharing status for the LUN."
+	::= { lunEntry 19 }
+
+	
+	lunSpaceReserved	OBJECT-TYPE
+	SYNTAX		INTEGER {
+				    false(1),
+				    true(2)
+				}
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"Whether the LUN has space reservation enabled."
+	::= { lunEntry 20 }
+	
+	lunStatsResetTime	OBJECT-TYPE
+	SYNTAX		INTEGER 
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"Number of seconds since this LUN's stats were
+			last reset."
+	::= { lunEntry 21 }
+				
+
+	lunHighReadOps	OBJECT-TYPE
+        SYNTAX		Counter
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+			"The total number of Target side SCSI read ops for 
+			this LUN since the stats were last reset.  This object 
+			returns the least significant 32 bits of the 64 bit 
+			unsigned integer."
+	::= { lunEntry 22}
+
+	lunLowReadOps	OBJECT-TYPE
+        SYNTAX		Counter
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+			"The total number of Target side SCSI read ops for 
+			this LUN since the stats were last reset.  This object 
+			returns the most significant 32 bits of the 64 bit 
+			unsigned integer."
+	::= { lunEntry 23 }
+
+
+	lunHighWriteOps	OBJECT-TYPE
+        SYNTAX		Counter
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+			"The total number of Target side SCSI write ops for 
+			this LUN since the stats were last reset.  This object 
+			returns the least significant 32 bits of the 64 bit 
+			unsigned integer."
+	::= { lunEntry 24}
+
+	lunLowWriteOps	OBJECT-TYPE
+        SYNTAX		Counter
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+			"The total number of Target side SCSI write ops for 
+			this LUN since the stats were last reset.  This object 
+			returns the most significant 32 bits of the 64 bit 
+			unsigned integer."
+	::= { lunEntry 25 }
+
+
+	lunHighOtherOps	OBJECT-TYPE
+        SYNTAX		Counter
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+			"The total number of Target side SCSI ops that are not 
+			read or write for this LUN since the stats were last 
+			reset.  This object returns the least significant 32 
+			bits of the 64 bit unsigned integer."
+	::= { lunEntry 26}
+
+	lunLowOtherOps	OBJECT-TYPE
+        SYNTAX		Counter
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+			"The total number of Target side SCSI ops that are not 
+			read or write for this LUN since the stats were last 
+			reset. This object returns the most significant 32 
+			bits of the 64 bit unsigned integer."
+	::= { lunEntry 27 }
+
+
+	lunMapTable    OBJECT-TYPE
+	SYNTAX		SEQUENCE OF LunMapEntry
+	ACCESS		not-accessible
+	STATUS		mandatory
+	DESCRIPTION
+			"Provide a table listing the initiator group to 
+			Logical Unit Number mapping for each LUN."
+	::= { lun 3 }
+
+	lunMapEntry	OBJECT-TYPE
+	SYNTAX		LunMapEntry
+	ACCESS		not-accessible
+	STATUS		mandatory
+	DESCRIPTION	
+			"Provide a per LUN and Initiator group mapping of 
+			SCSI logical unit numbers."
+	INDEX	{ lunMapLUNIndex, lunMapInitiatorGroupIndex }
+	::= { lunMapTable 1 }
+
+	LunMapEntry ::=
+	    SEQUENCE {
+		lunMapLUNIndex		INTEGER,
+		lunMapInitiatorGroupIndex	INTEGER,
+		lunMapLUNName			DisplayString,
+		lunMapInitiatorGroupName	DisplayString,
+		lunMapLogicalUnitNumber		INTEGER
+	    }
+
+	lunMapLUNIndex	OBJECT-TYPE	
+        SYNTAX          INTEGER (1..2147483647)
+        ACCESS          read-only 
+        STATUS          mandatory
+        DESCRIPTION
+                     "A number that identifies the LUN in the table."
+        ::= { lunMapEntry 1 }
+
+	lunMapInitiatorGroupIndex	OBJECT-TYPE
+        SYNTAX          INTEGER (1..2147483647)
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                     "A number that identifies an initiator group in 
+		     the table."
+        ::= { lunMapEntry 2 }
+
+	lunMapLUNName	OBJECT-TYPE
+	SYNTAX		    DisplayString
+	ACCESS		    read-only
+	STATUS		    mandatory
+	DESCRIPTION
+		    "The name of the LUN."
+	::= { lunMapEntry 3 }
+
+	lunMapInitiatorGroupName	OBJECT-TYPE
+	SYNTAX		    DisplayString
+	ACCESS		    read-only
+	STATUS		    mandatory
+	DESCRIPTION
+		    "The name of the initiator group that this LUN is 
+		    mapped to."
+	::= { lunMapEntry 4 }
+
+	lunMapLogicalUnitNumber	OBJECT-TYPE
+        SYNTAX          INTEGER
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                     "SCSI Logical Unit Number that this LUN is mapped to 
+		     for this initiator group."
+        ::= { lunMapEntry 5 }
+
+	initiator 	OBJECT IDENTIFIER ::= {blocks 16}
+
+	initiatorGroupTable	OBJECT-TYPE
+	SYNTAX		SEQUENCE OF InitiatorGroupEntry
+	ACCESS		not-accessible
+	STATUS		mandatory
+	DESCRIPTION
+			"Provide a report of per-initiator group general 
+			information "
+	::= {initiator 1}
+
+	initiatorGroupEntry	OBJECT-TYPE
+	SYNTAX		InitiatorGroupEntry
+	ACCESS		not-accessible
+	STATUS		mandatory
+	DESCRIPTION	
+			"Provide a report of per-initiator group information"
+	INDEX	{ initiatorGroupIndex }
+	::= { initiatorGroupTable 1 }
+	
+	InitiatorGroupEntry ::=
+	    SEQUENCE {
+		initiatorGroupIndex INTEGER,
+		initiatorGroupName  DisplayString,
+		initiatorGroupType  INTEGER,
+		initiatorGroupOS    INTEGER,
+		initiatorGroupThrottleReserve INTEGER,
+		initiatorGroupThrottleBorrow  INTEGER,
+		initiatorGroupUsePartner  INTEGER
+		}
+
+	initiatorGroupIndex      OBJECT-TYPE
+        SYNTAX          INTEGER (1..2147483647)
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                     "A number that identifies a specific initiator group."
+        ::= { initiatorGroupEntry 1 }
+
+	initiatorGroupName  OBJECT-TYPE
+	SYNTAX		    DisplayString
+	ACCESS		    read-only
+	STATUS		    mandatory
+	DESCRIPTION
+		    "The name of the initiator group"
+	::= { initiatorGroupEntry 2 }
+
+	initiatorGroupType OBJECT-TYPE
+        SYNTAX          INTEGER {
+                                     fcp(1),
+                                     iSCSI(2)
+                                }
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+		    "Type of this initiator group, either iSCSI or FCP"
+	::= { initiatorGroupEntry 3 }
+
+	initiatorGroupOS OBJECT-TYPE
+	SYNTAX          INTEGER {
+                                     default(1),
+                                     solaris(2),
+				     windows(3),
+				     hpux(4),
+				     aix(5),
+				     linux(6),
+				     default-partner(7),
+				     netware(8),
+				     vmware(9),
+				     invalid(256)
+                                }
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+		    "Operating system the clients in this initiator
+		    group run.  This governs  the finer details of 
+		    SCSI protocol interaction with these initiators"
+	::= { initiatorGroupEntry 4 }
+
+	initiatorGroupThrottleReserve OBJECT-TYPE
+        SYNTAX          INTEGER (0..99) 
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+		    "Percentage of filer scsi command blocks reserved for
+		    this initiator group"
+	::= { initiatorGroupEntry 5 }
+
+
+	initiatorGroupThrottleBorrow OBJECT-TYPE
+        SYNTAX          INTEGER {
+				false(1),
+				true(2)
+			}
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+		    "True if this inititiator group is allowed to
+		    exceed it's throttle settings if more resources
+		    are needed and otherwise available.  If
+		    initiatorGroupThrottleReserve is 0, this value
+		    is meaningless"
+	::= { initiatorGroupEntry 6 }
+
+        initiatorGroupUsePartner OBJECT-TYPE
+	SYNTAX          INTEGER {
+	                        false(1),
+				true(2)
+                                }
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+		    "The takeover mode for the initiator group.  This is
+		    only applicable to FCP initiator groups on clustered
+		    filers" 
+	::= { initiatorGroupEntry 7 }
+
+	initiatorGroupMemberTable	OBJECT-TYPE
+	SYNTAX		SEQUENCE OF InitiatorGroupMemberEntry
+	ACCESS		not-accessible
+	STATUS		mandatory
+	DESCRIPTION
+			"Table of individual Initator names in each Initiator 
+			group"
+	::= {initiator 2}
+
+	initiatorGroupMemberEntry	OBJECT-TYPE
+	SYNTAX		InitiatorGroupMemberEntry
+	ACCESS		not-accessible
+	STATUS		mandatory
+	DESCRIPTION	
+			"Provide a report of per-initiator group information"
+	INDEX	{ initiatorGroupMemberIndex, initiatorGroupMemberNameIndex}
+	::= { initiatorGroupMemberTable 1 }
+	
+	InitiatorGroupMemberEntry ::=
+	    SEQUENCE {
+		initiatorGroupMemberIndex
+			INTEGER,
+		initiatorGroupMemberNameIndex
+			INTEGER,
+		initiatorName	
+			DisplayString
+		}
+
+	initiatorGroupMemberIndex      OBJECT-TYPE
+        SYNTAX          INTEGER (1..2147483647)
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                     "A number that identifies a specific initiator group."
+        ::= { initiatorGroupMemberEntry 1 }
+
+	initiatorGroupMemberNameIndex      OBJECT-TYPE
+        SYNTAX          INTEGER (1..2147483647)
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                      "A number the identifies the initiator in the group."
+        ::= { initiatorGroupMemberEntry 2 }
+
+	initiatorName	OBJECT-TYPE
+	SYNTAX		DisplayString
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+		    "A textual name for this initiator."
+	::= { initiatorGroupMemberEntry 3 }
+
+	initiatorListTable  OBJECT-TYPE
+	SYNTAX		SEQUENCE OF InitatorListMemberEntry
+	ACCESS		not-accessible
+	STATUS		mandatory
+	DESCRIPTION
+		    "Table of initiators that are connected to the filer."
+	::= { initiator 3 }
+
+	initiatorListMemberEntry	OBJECT-TYPE
+	SYNTAX		InitatorListMemberEntry
+	ACCESS		not-accessible
+	STATUS		mandatory
+	DESCRIPTION	
+		    "Provide a report of per-connected-initiator information."
+	INDEX { initiatorListMemberEntryIndex}
+	::= { initiatorListTable 1 }
+
+	InitatorListMemberEntry ::=
+	    SEQUENCE {
+		initiatorListMemberEntryIndex	INTEGER,
+		targetAdapterName		DisplayString,
+		connectedInitiatorNodeName	DisplayString,
+		connectedInitiatorPortName	DisplayString,
+		connectedInitiatorType		INTEGER,
+		connectedInitiatorIsid		DisplayString,
+		connectedInitiatorPortalGroup	INTEGER
+	    }
+
+	initiatorListMemberEntryIndex      OBJECT-TYPE
+        SYNTAX          INTEGER (1..2147483647)
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                     "A number that identifies the initiator connected to
+		     the target adapter."
+        ::= { initiatorListMemberEntry 1 }
+
+	targetAdapterName      OBJECT-TYPE
+        SYNTAX		DisplayString 
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                     "The name of the target adapter in the filer."
+        ::= { initiatorListMemberEntry 2 }
+
+	connectedInitiatorNodeName      OBJECT-TYPE
+        SYNTAX		DisplayString 
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                     "A textual name for this initiator node."
+        ::= { initiatorListMemberEntry 3 }
+
+	connectedInitiatorPortName      OBJECT-TYPE
+        SYNTAX		DisplayString 
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                     "The FibreChannel device's portname. This is FCP only."
+        ::= { initiatorListMemberEntry 4 }
+
+	connectedInitiatorType	    OBJECT-TYPE
+        SYNTAX          INTEGER {
+                                     fcp(1),
+                                     iSCSI(2)
+                                }
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+		    "Type of this init group, either iSCSI or FCP"
+	::= { initiatorListMemberEntry 5 }
+
+	connectedInitiatorIsid	    OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+		    "The iSCSI isid (initiator session id) for this initiator.
+		    This is iSCSI only."
+	::= { initiatorListMemberEntry 6 }
+
+	connectedInitiatorPortalGroup	    OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+		    "The iSCSI portal group ID for this initiator. 
+		    This is iSCSI only."
+	::= { initiatorListMemberEntry 7 }
+
+
+	fcpTarget	OBJECT IDENTIFIER ::= {blocks 17}
+
+	fcpTargetTable	OBJECT-TYPE
+	SYNTAX		SEQUENCE OF FcpTargetTableEntry
+	ACCESS		not-accessible
+	STATUS		mandatory
+	DESCRIPTION
+			"Provide a report of fcp target adapter general 
+			information "
+	::= {fcpTarget 1}
+
+	fcpTargetTableEntry OBJECT-TYPE
+	SYNTAX		FcpTargetTableEntry
+	ACCESS		not-accessible
+	STATUS		mandatory
+	DESCRIPTION	
+			"Provide a report of per fcp target device information"
+	INDEX	{ fcpTargetTableIndex }
+	::= { fcpTargetTable 1 }
+	
+	FcpTargetTableEntry ::=
+	    SEQUENCE {
+		fcpTargetTableIndex    INTEGER,
+		fcpTargetName   DisplayString,
+		fcpTargetNN	DisplayString,
+		fcpTargetPN	DisplayString,
+		fcpTargetSpeed	INTEGER,
+		fcpTargetStatus	INTEGER,
+		fcpTargetStandby INTEGER,
+		fcpTargetTopology INTEGER,
+		fcpTargetType	INTEGER
+		}
+
+	fcpTargetTableIndex	OBJECT-TYPE
+        SYNTAX          INTEGER (1..2147483647)
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                     "A number that identifies a specific fcp target device."
+        ::= { fcpTargetTableEntry 1 }
+
+	fcpTargetName	    OBJECT-TYPE
+	SYNTAX		    DisplayString
+	ACCESS		    read-only
+	STATUS		    mandatory
+	DESCRIPTION
+		    "The name of the fcp target device" 
+	::= { fcpTargetTableEntry 2 }
+
+	fcpTargetNN	    OBJECT-TYPE
+	SYNTAX		    DisplayString
+	ACCESS		    read-only
+	STATUS		    mandatory
+	DESCRIPTION
+		    "The FC WWNN of the fcp target device" 
+	::= { fcpTargetTableEntry 3 }
+
+	fcpTargetPN	    OBJECT-TYPE
+	SYNTAX		    DisplayString
+	ACCESS		    read-only
+	STATUS		    mandatory
+	DESCRIPTION
+		    "The FC WWPN of the fcp target device" 
+	::= { fcpTargetTableEntry 4 }
+
+	fcpTargetSpeed	    OBJECT-TYPE
+        SYNTAX          INTEGER
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+		    "speed in gigabits per second. 0 is unknown."
+	::= { fcpTargetTableEntry 5 }
+
+	fcpTargetStatus	    OBJECT-TYPE
+        SYNTAX          INTEGER {
+				startup(1),
+				uninitialized(2),
+				initializing-fw(3),
+				link-not-connected(4),
+				waiting-for-link-up(5),
+				online(6),
+				link-disconnected(7),
+				resetting(8),
+				offline(9),
+				offlined-by-user-system(10),
+				unknown(11)
+				}
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+		    "Status of the fcp target adapter"
+	::= { fcpTargetTableEntry 6 }
+
+	fcpTargetStandby	OBJECT-TYPE
+	SYNTAX		INTEGER {
+				    false(1),
+				    true(2)
+				}
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"Whether this target adapter is in standby mode."
+	::= { fcpTargetTableEntry 7 }
+
+	fcpTargetTopology 	OBJECT-TYPE
+	SYNTAX		INTEGER {
+				    unknown(1),
+				    fabric(2),
+				    point-to-point(3),
+				    loop(4)
+				}
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"fibre channel topology for this adapter. "
+	::= { fcpTargetTableEntry 8 }
+
+        fcpTargetType		OBJECT-TYPE
+	SYNTAX		INTEGER {
+	                          physical(1),
+				  local(2),
+				  standby(3),
+				  partner(4),
+				  unknown(5)
+				 }
+	ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+			"Responsibility/Type for this adapter."
+	::= { fcpTargetTableEntry 9 }
+
+        fcpCfMode	OBJECT-TYPE
+	SYNTAX		INTEGER {
+	                           mixed(1),
+				   standby(2),
+				   partner(3),
+				   partner-proxy(4),
+				   partner-standby(5),
+				   local-primary(6),
+				   dual-fabric(7),
+				   ssi(8),
+				   unknown(256)
+	                        }
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+			"Failover setting for the FCP target cluster."
+	::= { blocks 18 }
+
+	
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+	-- Port sets
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+	
+	pset 		OBJECT IDENTIFIER ::= {blocks 19}
+
+	psetTable 	OBJECT-TYPE
+	SYNTAX		SEQUENCE OF PortSetEntry
+	ACCESS		not-accessible
+	STATUS		mandatory
+	DESCRIPTION
+			"Provide a report of portset general 
+			information "
+	::= {pset 1}
+
+	psetEntry 	OBJECT-TYPE
+	SYNTAX		PortSetEntry
+	ACCESS		not-accessible
+	STATUS		mandatory
+	DESCRIPTION	
+			"Provide a report of portset information"
+	INDEX	{ psetIndex }
+	::= { psetTable 1 }
+	
+	PortSetEntry ::=
+	    SEQUENCE {
+		psetIndex INTEGER,
+		psetName  DisplayString,
+		psetType  INTEGER
+		}
+
+	psetIndex	OBJECT-TYPE
+        SYNTAX          INTEGER (1..2147483647)
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                     "A number that identifies a specific port set."
+        ::= { psetEntry 1 }
+
+	psetName	OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+		    "The name of the port set"
+	::= { psetEntry 2 }
+	
+	psetType 	OBJECT-TYPE
+        SYNTAX          INTEGER {
+                                     fcp(1),
+                                     iSCSI(2)
+                                }
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+		    "Type of this port set, either iSCSI or FCP"
+	::= { psetEntry 3 }
+	
+	psetMemberTable	OBJECT-TYPE
+	SYNTAX		SEQUENCE OF PsetMemberEntry
+	ACCESS		not-accessible
+	STATUS		mandatory
+	DESCRIPTION
+			"Table of individual Port names in each Port
+			set"
+	::= {pset 2}
+
+	psetMemberEntry	OBJECT-TYPE
+	SYNTAX		PsetMemberEntry
+	ACCESS		not-accessible
+	STATUS		mandatory
+	DESCRIPTION	
+			"Provide a report of portset port information"
+	INDEX	{ psetMemberIndex, psetMemberNameIndex}
+	::= { psetMemberTable 1 }
+	
+	PsetMemberEntry ::=
+	    SEQUENCE {
+		psetMemberIndex
+			INTEGER,
+		psetMemberNameIndex
+			INTEGER,
+		psetPortName	
+			DisplayString
+		}
+
+	psetMemberIndex OBJECT-TYPE
+        SYNTAX          INTEGER (1..2147483647)
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+                     "A number that identifies a specific port set."
+        ::= { psetMemberEntry 1 }
+
+	psetMemberNameIndex	OBJECT-TYPE
+        SYNTAX          	INTEGER (1..2147483647)
+        ACCESS          	read-only
+        STATUS          	mandatory
+        DESCRIPTION
+                      "A number the identifies the port in the set."
+        ::= { psetMemberEntry 2 }
+	
+	psetPortName	OBJECT-TYPE
+	SYNTAX		DisplayString
+        ACCESS          read-only
+        STATUS          mandatory
+        DESCRIPTION
+		    "A textual name for this port."
+	::= { psetMemberEntry 3 }
+	
+
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+	-- NFS caching group 
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+
+
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+	-- NFS caching options 
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+	nfsCacheOptions		OBJECT IDENTIFIER ::= { nfscache 1 }
+
+	nfsCacheIsEnabled	OBJECT-TYPE
+	SYNTAX				INTEGER {
+						false(1),
+						true(2)
+					}
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"Whether NFS caching is enabled on this system."
+	::= { nfsCacheOptions 1 }
+
+	nfsCacheIsLicensed	OBJECT-TYPE
+	SYNTAX				INTEGER {
+						false(1),
+						true(2)
+					}
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+				"Whether NFS caching is licensed on this system."
+	::= { nfsCacheOptions 2 }
+
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+	-- NFS caching stats 
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+
+	nfsCacheStats		OBJECT IDENTIFIER ::= { nfscache 2 }
+
+    	-- nfsCacheBytesFromClients is DEPRECATED; use nfsCacheHighBytesFromClients
+	-- and nfsCacheLowBytesFromClients
+
+	nfsCacheBytesFromClients	OBJECT-TYPE
+	SYNTAX				Counter
+	ACCESS				read-only
+	STATUS				mandatory
+	DESCRIPTION
+			"Total NFS bytes received from clients"
+	::= { nfsCacheStats 1 }
+
+    	-- nfsCacheBytesToClients is DEPRECATED; use nfsCacheHighBytesToClients
+	-- and nfsCacheLowBytesToClients
+
+	nfsCacheBytesToClients		OBJECT-TYPE
+	SYNTAX				Counter
+	ACCESS				read-only
+	STATUS				mandatory
+	DESCRIPTION
+			"Total NFS bytes sent to clients"
+	::= { nfsCacheStats 2 }
+
+    	-- nfsCacheBytesFromServers is DEPRECATED; use nfsCacheHighBytesFromServers
+	-- and nfsCacheLowBytesFromServers
+
+	nfsCacheBytesFromServers	OBJECT-TYPE
+	SYNTAX				Counter
+	ACCESS				read-only
+	STATUS				mandatory
+	DESCRIPTION
+			"Total NFS bytes received from servers"
+	::= { nfsCacheStats 3 }
+
+    	-- nfsCacheBytesToServers is DEPRECATED; use nfsCacheHighBytesToServers
+	-- and nfsCacheLowBytesToServers
+
+	nfsCacheBytesToServers		OBJECT-TYPE
+	SYNTAX				Counter
+	ACCESS				read-only
+	STATUS				mandatory
+	DESCRIPTION
+			"Total NFS bytes sent to servers"
+	::= { nfsCacheStats 4 }
+
+    	-- nfsCacheTotalRequests is DEPRECATED; use nfsCacheHighTotalRequests
+	-- and nfsCacheLowTotalRequests
+
+	nfsCacheTotalRequests		OBJECT-TYPE
+	SYNTAX				Counter
+	ACCESS				read-only
+	STATUS				mandatory
+	DESCRIPTION
+			"Total NFS requests received"
+	::= { nfsCacheStats 5 }
+
+    	-- nfsCacheHitRequests is DEPRECATED; use nfsCacheHighHitRequests
+	-- and nfsCacheLowHitRequests
+
+	nfsCacheHitRequests		OBJECT-TYPE
+	SYNTAX				Counter
+	ACCESS				read-only
+	STATUS				mandatory
+	DESCRIPTION
+			"Total NFS requests resulting in cache hits"
+	::= { nfsCacheStats 6 }
+
+    	-- nfsCacheMissRequests is DEPRECATED; use nfsCacheHighMissRequests
+	-- and nfsCacheLowMissRequests
+
+	nfsCacheMissRequests		OBJECT-TYPE
+	SYNTAX				Counter
+	ACCESS				read-only
+	STATUS				mandatory
+	DESCRIPTION
+			"Total NFS requests resulting in cache misses"
+	::= { nfsCacheStats 7 }
+
+	nfsCacheMissCacheableRequests	OBJECT-TYPE
+	SYNTAX				Counter
+	ACCESS				read-only
+	STATUS				mandatory
+	DESCRIPTION
+			"Total NFS requests that were cacheable misses"
+	::= { nfsCacheStats 8 }
+
+	nfsCacheMissUnCacheableRequests	OBJECT-TYPE
+	SYNTAX				Counter
+	ACCESS				read-only
+	STATUS				mandatory
+	DESCRIPTION
+			"Total NFS requests that were uncacheable misses"
+	::= { nfsCacheStats 9 }
+
+	nfsCacheEjectRequests		OBJECT-TYPE
+	SYNTAX				Counter
+	ACCESS				read-only
+	STATUS				mandatory
+	DESCRIPTION
+			"Total NFS requests resulting in object eject due to expiration"
+	::= { nfsCacheStats 10 }
+
+	nfsCacheVerifyRequests		OBJECT-TYPE
+	SYNTAX				Counter
+	ACCESS				read-only
+	STATUS				mandatory
+	DESCRIPTION
+			"Total NFS requests resulting in object verification"
+	::= { nfsCacheStats 11 }
+
+	nfsCacheRpcRecords		OBJECT-TYPE
+	SYNTAX				Counter
+	ACCESS				read-only
+	STATUS				mandatory
+	DESCRIPTION
+			"Total RPC records received"
+	::= { nfsCacheStats 12 }
+
+	nfsCacheBWSavings			OBJECT-TYPE
+	SYNTAX				INTEGER
+	ACCESS				read-only
+	STATUS				mandatory
+	DESCRIPTION
+			"Bandwidth savings for NFS requests"
+	::= { nfsCacheStats 13 }
+
+	nfsCacheHighBytesFromClients	OBJECT-TYPE
+	SYNTAX				Counter
+	ACCESS				read-only
+	STATUS				mandatory
+	DESCRIPTION
+			"Total NFS bytes received from clients.  This object
+			 returns the most significant 32 bits of the 64 bit 
+			 unsigned integer."
+	::= { nfsCacheStats 14 }
+
+	nfsCacheLowBytesFromClients	OBJECT-TYPE
+	SYNTAX				Counter
+	ACCESS				read-only
+	STATUS				mandatory
+	DESCRIPTION
+			"Total NFS bytes received from clients.  This object
+			 returns the least significant 32 bits of the 64 bit 
+			 unsigned integer."
+	::= { nfsCacheStats 15 }
+
+	nfsCacheHighBytesToClients	OBJECT-TYPE
+	SYNTAX				Counter
+	ACCESS				read-only
+	STATUS				mandatory
+	DESCRIPTION
+			"Total NFS bytes sent to clients.  This object returns
+			 the most significant 32 bits of the 64 bit unsigned 
+			 integer."
+	::= { nfsCacheStats 16 }
+
+	nfsCacheLowBytesToClients	OBJECT-TYPE
+	SYNTAX				Counter
+	ACCESS				read-only
+	STATUS				mandatory
+	DESCRIPTION
+			"Total NFS bytes sent to clients.  This object returns
+			 the least significant 32 bits of the 64 bit unsigned 
+			 integer."
+	::= { nfsCacheStats 17 }
+
+	nfsCacheHighBytesFromServers	OBJECT-TYPE
+	SYNTAX				Counter
+	ACCESS				read-only
+	STATUS				mandatory
+	DESCRIPTION
+			"Total NFS bytes received from servers.  This object
+			 returns the most significant 32 bits of the 64 bit 
+			 unsigned integer."
+	::= { nfsCacheStats 18 }
+
+	nfsCacheLowBytesFromServers	OBJECT-TYPE
+	SYNTAX				Counter
+	ACCESS				read-only
+	STATUS				mandatory
+	DESCRIPTION
+			"Total NFS bytes received from servers.  This object
+			 returns the least significant 32 bits of the 64 bit
+			 unsigned integer."
+	::= { nfsCacheStats 19 }
+
+	nfsCacheHighBytesToServers		OBJECT-TYPE
+	SYNTAX				Counter
+	ACCESS				read-only
+	STATUS				mandatory
+	DESCRIPTION
+			"Total NFS bytes sent to servers.  This object
+			 returns the most significant 32 bits of the 64 bit 
+			 unsigned integer."
+	::= { nfsCacheStats 20 }
+
+	nfsCacheLowBytesToServers		OBJECT-TYPE
+	SYNTAX				Counter
+	ACCESS				read-only
+	STATUS				mandatory
+	DESCRIPTION
+			"Total NFS bytes sent to servers.  This object
+			 returns the least significant 32 bits of the 64 bit 
+			 unsigned integer."
+	::= { nfsCacheStats 21 }
+
+	nfsCacheHighTotalRequests		OBJECT-TYPE
+	SYNTAX				Counter
+	ACCESS				read-only
+	STATUS				mandatory
+	DESCRIPTION
+			"Total NFS requests received.  This object returns
+			 the most significant 32 bits of the 64 bit unsigned 
+			 integer."
+	::= { nfsCacheStats 22 }
+
+	nfsCacheLowTotalRequests		OBJECT-TYPE
+	SYNTAX				Counter
+	ACCESS				read-only
+	STATUS				mandatory
+	DESCRIPTION
+			"Total NFS requests received.  This object returns
+			 the least significant 32 bits of the 64 bit unsigned 
+			 integer."
+	::= { nfsCacheStats 23 }
+
+	nfsCacheHighHitRequests		OBJECT-TYPE
+	SYNTAX				Counter
+	ACCESS				read-only
+	STATUS				mandatory
+	DESCRIPTION
+			"Total NFS requests resulting in cache hits.  This
+			 object returns the most significant 32 bits of the 
+			 64 bit unsigned integer."
+	::= { nfsCacheStats 24 }
+
+	nfsCacheLowHitRequests		OBJECT-TYPE
+	SYNTAX				Counter
+	ACCESS				read-only
+	STATUS				mandatory
+	DESCRIPTION
+			"Total NFS requests resulting in cache hits.  This
+			 object returns the least significant 32 bits of the
+			 64 bit unsigned integer."
+	::= { nfsCacheStats 25 }
+
+	nfsCacheHighMissRequests		OBJECT-TYPE
+	SYNTAX				Counter
+	ACCESS				read-only
+	STATUS				mandatory
+	DESCRIPTION
+			"Total NFS requests resulting in cache misses.  This
+			 object returns the most significant 32 bits of the 
+			 64 bit unsigned integer."
+	::= { nfsCacheStats 26 }
+
+	nfsCacheLowMissRequests		OBJECT-TYPE
+	SYNTAX				Counter
+	ACCESS				read-only
+	STATUS				mandatory
+	DESCRIPTION
+			"Total NFS requests resulting in cache misses.  This
+			 object returns the least significant 32 bits of the
+			 64 bit unsigned integer."
+	::= { nfsCacheStats 27 }
+
+
+	-- -- -- -- -- -- -- --
+	-- the storage group --
+	-- -- -- -- -- -- -- --
+
+	enclosure	OBJECT IDENTIFIER ::=	{ storage 1 }
+
+        -- -- -- -- -- -- --
+        -- The enclosure group for storage
+
+	enclNumber		OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+	    "The number of storage enclosures in the storage subsystem."
+	::= { enclosure 1 }
+
+	enclTable	OBJECT-TYPE
+	SYNTAX		SEQUENCE OF EnclEntry
+	ACCESS		not-accessible
+	STATUS		mandatory
+	DESCRIPTION
+	    "Display disk enclosure environmental information for fiber
+	     channel shelves and NearStore SCSI shelves. Shelves that do not
+	     support SCSI Enclosure Services, such as DEC Storage Shelf,
+	     Eurologic XL8 are not supported."
+	::= { enclosure 2 }
+
+	enclEntry	OBJECT-TYPE
+	SYNTAX		EnclEntry
+	ACCESS		not-accessible
+	STATUS		mandatory
+	DESCRIPTION
+	    "Display disk enclosure (shelf) environmental
+	     information for the referenced disk enclosure."
+	INDEX	{ enclIndex }
+	::= { enclTable 1 }
+
+	EnclEntry ::=
+	    SEQUENCE {
+	        enclIndex
+		    INTEGER,
+		enclContactState
+		    INTEGER,
+		enclChannelShelfAddr
+		    DisplayString,
+		enclProductLogicalID
+		    DisplayString,
+		enclProductID
+		    DisplayString, 
+		enclProductVendor
+		    DisplayString,
+		enclProductModel
+		    DisplayString,
+		enclProductRevision
+		    DisplayString,
+		enclProductSerialNo
+		    DisplayString,
+		enclNumberDiskBays
+		    INTEGER,
+		enclDisksPresent
+		    DisplayString,
+		enclPowerSuppliesMaximum
+		    INTEGER,
+		enclPowerSuppliesPresent
+		    DisplayString,
+		enclPowerSuppliesSerialNos
+		    DisplayString,
+		enclPowerSuppliesFailed
+		    DisplayString,
+		enclFansMaximum
+		    INTEGER,
+		enclFansPresent
+		    DisplayString,
+		enclFansFailed
+		    DisplayString,
+		enclTempSensorsMaximum
+		    INTEGER, 
+		enclTempSensorsPresent
+		    DisplayString, 
+		enclTempSensorsOverTempFail
+		    DisplayString,
+		enclTempSensorsOverTempWarn
+		    DisplayString,
+		enclTempSensorsUnderTempFail
+		    DisplayString,
+		enclTempSensorsUnderTempWarn
+		    DisplayString,
+		enclTempSensorsOverTempFailThr
+		    DisplayString,
+		enclTempSensorsOverTempWarnThr
+		    DisplayString,
+		enclTempSensorsUnderTempFailThr
+		    DisplayString,
+		enclTempSensorsUnderTempWarnThr
+		    DisplayString,
+		enclTempSensorsCurrentTemp
+		    DisplayString,
+		enclElectronicsMaximum
+		    INTEGER,
+		enclElectronicsPresent
+		    DisplayString,
+		enclElectronicsSerialNos
+		    DisplayString,
+		enclElectronicsFailed
+		    DisplayString
+	    }
+
+	enclIndex	OBJECT-TYPE
+	SYNTAX		INTEGER (0..255)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+			"A number that identifies this enclosure among the
+			 possible monitored enclosures. This number normally
+			 uniquely identifies one shelf within one boot,
+			 but may it change between boots. The number may
+			 also change within a boot if shelves are removed
+			 and added."
+	::= { enclEntry 1 }
+
+	enclContactState	OBJECT-TYPE
+	SYNTAX			INTEGER {
+					initializing(1),
+					transitioning(2),
+					active(3),
+					inactive(4),
+					reconfiguring(5),
+					nonexistent(6)
+				}
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+	    "The state of the communication between the filer or storage
+	    engine and the enclosure monitoring device in the enclosure."
+	::= { enclEntry 2 }
+
+	enclChannelShelfAddr	OBJECT-TYPE
+	SYNTAX			DisplayString
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+	    "The adapter number or switch name and the port number
+	    (together, called the channel), and shelf ID of this
+	    enclosure. Examples are 8a.1 and switch:5.1. "
+	::= { enclEntry 3 }
+
+	enclProductLogicalID	OBJECT-TYPE
+	SYNTAX			DisplayString
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+	    "The logical identifier of this enclosure. This a form of the
+	    World-Wide Name (WWN)."
+	::= { enclEntry 4 }
+
+	enclProductID	OBJECT-TYPE
+	SYNTAX			DisplayString
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+	    "The product ID of the shelf hardware module that provides
+	    the enclosure monitoring function. Example is LRC."
+	::= { enclEntry 5 }
+
+	enclProductVendor	OBJECT-TYPE
+	SYNTAX			DisplayString
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+	    "The name of the vendor of this enclosure. Example is Xyratex."
+	::= { enclEntry 6 }
+
+	enclProductModel	OBJECT-TYPE
+	SYNTAX			DisplayString
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+	    "The model name of this enclosure. Example is DiskShelf14."
+	::= { enclEntry 7 }
+
+	enclProductRevision	OBJECT-TYPE
+	SYNTAX			DisplayString
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+	    "The revision number of this enclosure."
+	::= { enclEntry 8 }
+
+	enclProductSerialNo	OBJECT-TYPE
+	SYNTAX			DisplayString
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+	    "The serial number of this enclosure."
+	::= { enclEntry 9 }
+
+	enclNumberDiskBays	OBJECT-TYPE
+	SYNTAX			INTEGER 
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+	    "The number of disk bays in this enclosure."
+	::= { enclEntry 10 }
+
+	enclDisksPresent	OBJECT-TYPE
+	SYNTAX			DisplayString
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+	    "The list of disks present by bay number in this enclosure."
+	::= { enclEntry 11 }
+
+	enclPowerSuppliesMaximum	OBJECT-TYPE
+	SYNTAX				INTEGER
+	ACCESS				read-only
+	STATUS				mandatory
+	DESCRIPTION
+	    "The maximum number of power supplies is this enclosure."
+	::= { enclEntry 12 }
+
+	enclPowerSuppliesPresent	OBJECT-TYPE
+	SYNTAX				DisplayString
+	ACCESS				read-only
+	STATUS				mandatory
+	DESCRIPTION
+	    "The list of power supplies present in the enclosure. 
+	     Numbering is from left to right in their intended location
+	     in the shelf, while facing the supplies."
+	::= { enclEntry 13 }
+ 
+	enclPowerSuppliesSerialNos	OBJECT-TYPE
+	SYNTAX				DisplayString
+	ACCESS				read-only
+	STATUS				mandatory
+	DESCRIPTION
+	    "The list of serial numbers of power supplies present
+	     in the enclosure. Not all shelves are able to report the
+	     power supply serial number. Communication errors may
+	     make the serial number unavailable. Numbering is from left
+	     to right in their intended location in the shelf, while
+	     facing the supplies."
+	::= { enclEntry 14 }
+ 
+	enclPowerSuppliesFailed	OBJECT-TYPE
+	SYNTAX			DisplayString
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+	    "The list of failed power supplies in this enclosure, numbered as
+	     in enclPowerSuppliesPresent."
+	::= { enclEntry 15 }
+
+	enclFansMaximum	OBJECT-TYPE
+	SYNTAX		INTEGER
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+	    "The maximum number of fans or fan modules monitored by this
+	     enclosure. R100/R150 shelf power supply fans are not included
+	     in this number."
+	::= { enclEntry 16 }
+
+	enclFansPresent	OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+	    "The list of fans or fan modules present and for which status
+	     is known in this enclosure. Fans are numbered left-to-right as
+	     facing the fans. R100/R150 shelf power supply fans are
+	     not included in this list."
+	::= { enclEntry 17 }
+
+	enclFansFailed	OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+	    "The list of failed fans or fan modules in this enclosure. Fans
+	     are numbered as described in enclFansPresent."
+	::= { enclEntry 18 }
+
+	enclTempSensorsMaximum	OBJECT-TYPE
+	SYNTAX			INTEGER
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+	    "The maximum number of temperature sensors monitored
+	     by this enclosure."
+	::= { enclEntry 19 }
+ 
+	enclTempSensorsPresent	OBJECT-TYPE
+	SYNTAX			DisplayString
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+	    "The list of temperature sensors present and for which
+	     status is known in this enclosure. Temperature sensors are
+	     numbered top-to-bottom and left-to-right, beginning with
+	     the front of the enclosure, then the rear, as the modules
+	     containing them are faced."
+	::= { enclEntry 20 }
+ 
+	enclTempSensorsOverTempFail	OBJECT-TYPE
+	SYNTAX				DisplayString
+	ACCESS				read-only
+	STATUS				mandatory
+	DESCRIPTION
+	    "The list of temperature sensors reporting
+	     overtemperature failure in this enclosure. Sensors are
+	     numbered as in TempSensorsPresent."
+	::= { enclEntry 21 }
+
+	enclTempSensorsOverTempWarn	OBJECT-TYPE
+	SYNTAX				DisplayString
+	ACCESS				read-only
+	STATUS				mandatory
+	DESCRIPTION
+	    "The list of temperature sensors reporting overtemperature
+	     warning in this enclosure. Sensors are numbered as in
+	     TempSensorsPresent."
+	::= { enclEntry 22 }
+ 
+	enclTempSensorsUnderTempFail	OBJECT-TYPE
+	SYNTAX				DisplayString
+	ACCESS				read-only
+	STATUS				mandatory
+	DESCRIPTION
+	    "The list of temperature sensors reporting undertemperature
+	     failure in this enclosure. Sensors are numbered as in
+	     TempSensorsPresent."
+	::= { enclEntry 23 }
+ 
+	enclTempSensorsUnderTempWarn	OBJECT-TYPE
+	SYNTAX				DisplayString
+	ACCESS				read-only
+	STATUS				mandatory
+	DESCRIPTION
+	    "The list of temperature sensors reporting undertemperature
+	     warning in this enclosure. Sensors are numbered as in
+	     TempSensorsPresent."
+	::= { enclEntry 24 }
+ 
+	enclTempSensorsCurrentTemp	OBJECT-TYPE
+	SYNTAX				DisplayString
+	ACCESS				read-only
+	STATUS				mandatory
+	DESCRIPTION
+	    "The list of temperatures reported by all temperature sensors in
+	     the enclosure, including the ambient temperature. Sensors are
+	     numbered as in TempSensorsPresent."
+	::= { enclEntry 25 }
+ 
+	enclTempSensorsOverTempFailThr	OBJECT-TYPE
+	SYNTAX				DisplayString
+	ACCESS				read-only
+	STATUS				mandatory
+	DESCRIPTION
+	    "The list of overtemperature failure thresholds for all
+	     temperature sensors in the enclosure. Sensors are
+	     numbered as in TempSensorsPresent."
+	::= { enclEntry 26 }
+
+	enclTempSensorsOverTempWarnThr	OBJECT-TYPE
+	SYNTAX				DisplayString
+	ACCESS				read-only
+	STATUS				mandatory
+	DESCRIPTION
+	    "The list of overtemperature warning thresholds for all
+	     temperature sensors in the enclosure. Sensors are
+	     numbered as in TempSensorsPresent."
+	::= { enclEntry 27 }
+ 
+	enclTempSensorsUnderTempFailThr	OBJECT-TYPE
+	SYNTAX				DisplayString
+	ACCESS				read-only
+	STATUS				mandatory
+	DESCRIPTION
+	    "The list of undertemperature failure thresholds for all
+	     temperature sensors in the enclosure. Sensors are numbered as in
+	     TempSensorsPresent."
+	::= { enclEntry 28 }
+ 
+	enclTempSensorsUnderTempWarnThr	OBJECT-TYPE
+	SYNTAX				DisplayString
+	ACCESS				read-only
+	STATUS				mandatory
+	DESCRIPTION
+	    "The list of undertemperature warning thresholds for all
+	     temperature sensors in the enclosure. Sensors are numbered as in
+	     TempSensorsPresent."
+	::= { enclEntry 29 }
+ 
+	enclElectronicsMaximum	OBJECT-TYPE
+	SYNTAX			INTEGER 
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+	    "The number of enclosure services electronics modules that it is
+	     possible for this enclosure to detect and/or monitor."
+	::= { enclEntry 30 }
+ 
+	enclElectronicsPresent	OBJECT-TYPE
+	SYNTAX			DisplayString
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION
+	    "The list those enclosure services electronics modules present in
+	     this enclosure. Numbering is from left-to-right or top-to-bottom
+	     in their intended location in the shelf, while facing the
+	     electronics modules. It is normal for the R200 FC-AT module to be
+	     reported as the second module." 
+	::= { enclEntry 31 }
+ 
+	enclElectronicsSerialNos	OBJECT-TYPE
+	SYNTAX				DisplayString
+	ACCESS				read-only
+	STATUS				mandatory
+	DESCRIPTION
+	    "The list of serial numbers of the enclosure services electronics
+	     modules present in this enclosure. The order follows that of
+	     enclElectronicsPresent."
+	::= { enclEntry 32 }
+ 
+	enclElectronicsFailed		OBJECT-TYPE
+	SYNTAX				DisplayString
+	ACCESS				read-only
+	STATUS				mandatory
+	DESCRIPTION
+	    "The list of failed electronics elements. Valid only if
+	     enclElectronicsPresent shows that some are present."
+	::= { enclEntry 33 }
+
+	-- -- -- -- -- -- -- --
+	-- the network group
+	-- -- -- -- -- -- -- --
+
+	netInterfaces OBJECT IDENTIFIER ::= { network 1 }
+
+	-- The net Interfaces table contains information on the entity's
+	-- interfaces.  
+
+
+	netifNumber OBJECT-TYPE
+	SYNTAX  INTEGER
+	ACCESS  read-only
+	STATUS  mandatory
+	DESCRIPTION
+                      "The number of network interfaces (regardless of
+                      their current state) present on this system."
+	::= { netInterfaces 1 }
+
+	netifTable OBJECT-TYPE
+	SYNTAX  SEQUENCE OF NetIfEntry
+	ACCESS  not-accessible
+	STATUS  mandatory
+	DESCRIPTION
+	        "A list of interface entries.  The number of
+                 entries is given by the value of netifNumber."
+	::= { netInterfaces 2 }
+
+        netifEntry OBJECT-TYPE
+	SYNTAX  NetIfEntry
+	ACCESS  not-accessible
+	STATUS  mandatory
+	DESCRIPTION
+                      "An interface entry containing objects at the
+                      subnetwork layer and below for a particular
+                      interface."
+	INDEX   { netifIndex }
+	::= { netifTable 1 }
+
+	NetIfEntry ::=
+	    SEQUENCE {
+		netifIndex
+		    INTEGER,
+		netifDescr
+                      DisplayString,
+		ifHighInOctets
+                      Counter,
+		ifLowInOctets
+                      Counter,
+	    	ifHighInUcastPkts
+                      Counter,
+		ifLowInUcastPkts
+                      Counter,
+		ifHighInNUcastPkts
+                      Counter,
+		ifLowInNUcastPkts
+                      Counter,
+		ifHighInDiscards
+                      Counter,
+		ifLowInDiscards
+                      Counter,
+		ifHighInErrors
+                      Counter,
+		ifLowInErrors
+                      Counter,
+		ifHighInUnknownProtos
+                      Counter,
+		ifLowInUnknownProtos
+                      Counter,
+		ifHighOutOctets
+                      Counter,
+		ifLowOutOctets
+                      Counter,
+		ifHighOutUcastPkts
+                      Counter,
+		ifLowOutUcastPkts
+                      Counter,
+		ifHighOutNUcastPkts
+                      Counter,
+		ifLowOutNUcastPkts
+                      Counter,
+		ifHighOutDiscards
+                      Counter,
+		ifLowOutDiscards
+                      Counter,
+		ifHighOutErrors
+                      Counter,
+		ifLowOutErrors
+                      Counter
+	}
+        netifIndex OBJECT-TYPE
+	SYNTAX	INTEGER (1..2147483647)
+     	ACCESS  read-only
+	STATUS  mandatory
+	DESCRIPTION
+                      "A unique value for each interface.  Its value
+                      ranges between 1 and the value of ifNumber.  The
+                      value for each interface must remain constant at
+                      least from one re-initialization of the entity's
+                      network management system to the next re-
+                      initialization."
+        ::= { netifEntry 1 }
+
+	netifDescr OBJECT-TYPE
+	SYNTAX  DisplayString (SIZE (0..255))
+       	ACCESS  read-only
+	STATUS  mandatory
+	DESCRIPTION
+                      "A textual string containing information about the
+                      interface.  This string should include the name of
+                      the manufacturer, the product name and the version
+                      of the hardware interface."
+	::= { netifEntry 2 }
+
+        ifHighInOctets OBJECT-TYPE
+	SYNTAX  Counter
+       	ACCESS  read-only
+	STATUS  mandatory
+	DESCRIPTION
+                     "The total number of octets received on the
+                      interface, including framing characters.
+		      This object returns the most significant 32 bits of
+		      the 64 bit unsigned integer."
+	::= { netifEntry 3 }
+
+        ifLowInOctets OBJECT-TYPE
+	SYNTAX  Counter
+       	ACCESS  read-only
+	STATUS  mandatory
+	DESCRIPTION
+                     "The total number of octets received on the
+                      interface, including framing characters.
+		      This object returns the least significant 32 bits of
+		      the 64 bit unsigned integer."
+	::= { netifEntry 4 }
+
+	ifHighInUcastPkts OBJECT-TYPE
+	SYNTAX  Counter
+	ACCESS  read-only
+	STATUS  mandatory
+	DESCRIPTION
+                      "The number of subnetwork-unicast packets
+                      delivered to a higher-layer protocol.
+		      This object returns the most significant 32 bits of
+		      the 64 bit unsigned integer."
+	::= { netifEntry 5 }
+
+	ifLowInUcastPkts OBJECT-TYPE
+	SYNTAX  Counter
+	ACCESS  read-only
+	STATUS  mandatory
+	DESCRIPTION
+                      "The number of subnetwork-unicast packets
+                      delivered to a higher-layer protocol.
+		      This object returns the least significant 32 bits of
+		      the 64 bit unsigned integer."
+	::= { netifEntry 6 }
+
+
+	ifHighInNUcastPkts OBJECT-TYPE
+	SYNTAX  Counter
+	ACCESS  read-only
+	STATUS  mandatory
+	DESCRIPTION
+                      "The number of non-unicast (i.e., subnetwork-
+                      broadcast or subnetwork-multicast) packets
+                      delivered to a higher-layer protocol.
+		      This object returns the most significant 32 bits of 
+		      the 64 bit unsigned integer."
+	::= { netifEntry 7 }
+
+	ifLowInNUcastPkts OBJECT-TYPE
+	SYNTAX  Counter
+	ACCESS  read-only
+	STATUS  mandatory
+	DESCRIPTION
+                      "The number of non-unicast (i.e., subnetwork-
+                      broadcast or subnetwork-multicast) packets
+                      delivered to a higher-layer protocol.
+		      This object returns the least significant 32 bits of
+		      the 64 bit unsigned integer."
+	::= { netifEntry 8 }
+
+	ifHighInDiscards OBJECT-TYPE
+	SYNTAX  Counter
+	ACCESS  read-only
+	STATUS  mandatory
+	DESCRIPTION
+                      "The number of inbound packets which were chosen
+                      to be discarded even though no errors had been
+                      detected to prevent their being deliverable to a
+                      higher-layer protocol.  One possible reason for
+                      discarding such a packet could be to free up
+                      buffer space. This object returns the most 
+		      significant 32 bits of the 64 bit unsigned integer."
+	::= { netifEntry 9 }
+
+	ifLowInDiscards OBJECT-TYPE
+	SYNTAX  Counter
+	ACCESS  read-only
+	STATUS  mandatory
+	DESCRIPTION
+                      "The number of inbound packets which were chosen
+                      to be discarded even though no errors had been
+                      detected to prevent their being deliverable to a
+                      higher-layer protocol.  One possible reason for
+                      discarding such a packet could be to free up
+                      buffer space. This object returns the least 
+		      significant 32 bits of the 64 bit unsigned integer."
+	::= { netifEntry 10 }
+
+	ifHighInErrors OBJECT-TYPE
+	SYNTAX  Counter
+	ACCESS  read-only
+	STATUS  mandatory
+	DESCRIPTION
+                      "The number of inbound packets that contained
+                      errors preventing them from being deliverable to a
+                      higher-layer protocol. This object returns the 
+		      most significant 32 bits of the 64 bit unsigned integer."
+	::= { netifEntry 11 }
+
+	ifLowInErrors OBJECT-TYPE
+	SYNTAX  Counter
+	ACCESS  read-only
+	STATUS  mandatory
+	DESCRIPTION
+                      "The number of inbound packets that contained
+                      errors preventing them from being deliverable to a
+                      higher-layer protocol. This object returns the 
+		      least significant 32 bits of the 64 bit unsigned integer."
+	::= { netifEntry 12 }
+
+	ifHighInUnknownProtos OBJECT-TYPE
+	SYNTAX  Counter
+	ACCESS  read-only
+	STATUS  mandatory
+	DESCRIPTION
+                      "The number of packets received via the interface
+                      which were discarded because of an unknown or
+                      unsupported protocol. This object returns the 
+		      most significant 32 bits of the 64 bit unsigned integer."
+	::= { netifEntry 13 }
+
+	ifLowInUnknownProtos OBJECT-TYPE
+	SYNTAX  Counter
+	ACCESS  read-only
+	STATUS  mandatory
+	DESCRIPTION
+                      "The number of packets received via the interface
+                      which were discarded because of an unknown or
+                      unsupported protocol. This object returns the 
+		      least significant 32 bits of the 64 bit unsigned integer."
+	::= { netifEntry 14 }
+
+	ifHighOutOctets OBJECT-TYPE
+	SYNTAX  Counter
+	ACCESS  read-only
+	STATUS  mandatory
+	DESCRIPTION
+                      "The total number of octets transmitted out of the
+                      interface, including framing characters.
+                      This object returns the most significant 32 bits of the
+		      64 bit unsigned integer."
+	::= { netifEntry 15 }
+
+	ifLowOutOctets OBJECT-TYPE
+	SYNTAX  Counter
+	ACCESS  read-only
+	STATUS  mandatory
+	DESCRIPTION
+                      "The total number of octets transmitted out of the
+                      interface, including framing characters.
+                      This object returns the least significant 32 bits of
+		      the 64 bit unsigned integer."
+	::= { netifEntry 16 }
+
+	ifHighOutUcastPkts OBJECT-TYPE
+	SYNTAX  Counter
+	ACCESS  read-only
+	STATUS  mandatory
+	DESCRIPTION
+                      "The total number of packets that higher-level
+                      protocols requested be transmitted to a
+                      subnetwork-unicast address, including those that
+                      were discarded or not sent. This object returns 
+		      the most significant 32 bits of the 64 bit unsigned 
+		      integer."
+	::= { netifEntry 17 }
+
+	ifLowOutUcastPkts OBJECT-TYPE
+	SYNTAX  Counter
+	ACCESS  read-only
+	STATUS  mandatory
+	DESCRIPTION
+                      "The total number of packets that higher-level
+                      protocols requested be transmitted to a
+                      subnetwork-unicast address, including those that
+                      were discarded or not sent. This object returns 
+		      the least significant 32 bits of the 64 bit unsigned 
+		      integer."
+	::= { netifEntry 18 }
+
+	ifHighOutNUcastPkts OBJECT-TYPE
+	SYNTAX  Counter
+	ACCESS  read-only
+	STATUS  mandatory
+	DESCRIPTION
+                      "The total number of packets that higher-level
+                      protocols requested be transmitted to a non-
+                      unicast (i.e., a subnetwork-broadcast or
+                      subnetwork-multicast) address, including those
+                      that were discarded or not sent. This object returns 
+		      the most significant 32 bits of the 64 bit unsigned 
+		      integer."
+	::= { netifEntry 19 }
+
+	ifLowOutNUcastPkts OBJECT-TYPE
+	SYNTAX  Counter
+	ACCESS  read-only
+	STATUS  mandatory
+	DESCRIPTION
+                      "The total number of packets that higher-level
+                      protocols requested be transmitted to a non-
+                      unicast (i.e., a subnetwork-broadcast or
+                      subnetwork-multicast) address, including those
+                      that were discarded or not sent. This object returns 
+		      the least significant 32 bits of the 64 bit unsigned 
+		      integer."
+	::= { netifEntry 20 }
+
+	ifHighOutDiscards OBJECT-TYPE
+	SYNTAX  Counter
+	ACCESS  read-only
+	STATUS  mandatory
+	DESCRIPTION
+                      "The number of outbound packets which were chosen
+                      to be discarded even though no errors had been
+                      detected to prevent their being transmitted.  One
+                      possible reason for discarding such a packet could
+                      be to free up buffer space. This object returns 
+		      the most significant 32 bits of the 64 bit unsigned 
+		      integer."
+	::= { netifEntry 21 }
+
+	ifLowOutDiscards OBJECT-TYPE
+	SYNTAX  Counter
+	ACCESS  read-only
+	STATUS  mandatory
+	DESCRIPTION
+                      "The number of outbound packets which were chosen
+                      to be discarded even though no errors had been
+                      detected to prevent their being transmitted.  One
+                      possible reason for discarding such a packet could
+                      be to free up buffer space. This object returns 
+		      the least significant 32 bits of the 64 bit unsigned 
+		      integer."
+	::= { netifEntry 22 }
+
+	ifHighOutErrors OBJECT-TYPE
+	SYNTAX  Counter
+	ACCESS  read-only
+	STATUS  mandatory
+	DESCRIPTION
+                      "The number of outbound packets that could not be
+                      transmitted because of errors. This object returns 
+		      the most significant 32 bits of the 64 bit unsigned 
+		      integer."
+	::= { netifEntry 23 }
+
+	ifLowOutErrors OBJECT-TYPE
+	SYNTAX  Counter
+	ACCESS  read-only
+	STATUS  mandatory
+	DESCRIPTION
+                      "The number of outbound packets that could not be
+                      transmitted because of errors. This object returns 
+		      the least significant 32 bits of the 64 bit unsigned 
+		      integer."
+	::= { netifEntry 24 }
+
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
+	-- NetApp trap definitions
+	-- See RFC 1215 for instructions on building traps
+	-- 
+	-- All EnterpiseSpecific Traps of Network Appliance
+	-- contain the OID 'userDefined'
+	-- except traps with the trap types - 
+	--	globalStatusNonRecoverable
+	--	globalStatusCritical
+	--	globalStatusNonRecoverable
+	--	globalStatusNonCritical
+	--	globalStatusOk
+	-- which contain OID 'miscGlobalStatusMessage'
+	--
+	-- The last digit of a trap contains information about the
+	-- priority of the trap:
+	--
+	-- 1 emergency
+	-- 2 alert
+	-- 3 critical
+	-- 4 error
+	-- 5 warning
+	-- 6 notification
+	-- 7 information
+	-- 8 debug
+	--
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
+
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
+	--
+	--  A generic, unprioritized, user-defined trap.  These
+	--  are generated in releases prior to 5.4.
+	--
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
+
+	userDefined	TRAP-TYPE    
+	ENTERPRISE	netapp    
+	DESCRIPTION
+            "A polling-style trap built using the 'snmp traps'
+	     command on the filer."    
+	    
+	::= 2
+
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+        -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+        -- Disk Health Monitor Notices for Disk Fault
+        -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+        -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+
+        dhmNoticeDegradedIO     TRAP-TYPE
+        ENTERPRISE              netapp
+        DESCRIPTION
+                "Disk Health Monitor -
+                Reported a Disk Degraded-I/O  Event"
+
+        ::= 6
+
+        dhmNoticePFAEvent       TRAP-TYPE
+        ENTERPRISE              netapp
+        DESCRIPTION
+                "Disk Health Monitor -
+                Reported a Disk Predictive-Failure Event"
+
+        ::= 7
+
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
+	--
+	--  This section contains generic user-defined traps.
+	--  All user-defined traps with the same priority
+	--  use the trap for that priority level.
+	--
+	--  For example, all "critical" user-defined traps are
+	--  sent with ID 13.  The string data sent with the
+	--  trap identifies the specific critical event.
+	--
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
+
+        emergencyTrap     TRAP-TYPE    
+        ENTERPRISE        netapp    
+        DESCRIPTION
+            "A user-defined trap indicating an extremely urgent
+             situation, usually indicating that the system has
+             failed and is shutting down."
+
+        ::= 11
+
+        alertTrap         TRAP-TYPE    
+        ENTERPRISE        netapp    
+        DESCRIPTION
+            "A user-defined trap indicating a condition that
+             should be corrected immediately, such as a failed disk."
+
+        ::= 12
+
+        criticalTrap      TRAP-TYPE    
+        ENTERPRISE        netapp    
+        DESCRIPTION
+            "A user-defined trap indicating a critical condition,
+             such as a hard device error."
+
+        ::= 13
+
+        errorTrap         TRAP-TYPE    
+        ENTERPRISE        netapp    
+        DESCRIPTION
+            "A user-defined trap indicating an error condition,
+             such as a mistake in a configuration file."
+
+        ::= 14
+
+        warningTrap       TRAP-TYPE    
+        ENTERPRISE        netapp    
+        DESCRIPTION
+            "A user-defined trap indicating a condition which
+            is not an error, but which may require special handling."
+
+        ::= 15
+
+        notificationTrap   TRAP-TYPE    
+        ENTERPRISE        netapp    
+        DESCRIPTION
+            "A user-defined trap meant to provide notification,
+             such as an hourly uptime message."
+
+        ::= 16
+
+        informationalTrap         TRAP-TYPE    
+        ENTERPRISE        netapp    
+        DESCRIPTION
+            "A user-defined trap used for informational purposes."
+
+        ::= 17
+
+        dbgTrap         TRAP-TYPE    
+        ENTERPRISE        netapp    
+        DESCRIPTION
+            "A user-defined trap used for debugging purposes.
+	     This trap was previously mis-documented as being trap
+	     number 17, with the name debugTrap.  It has always,
+	     actually, been trap 18.  The name change is to avoid
+	     issues with environments that already have a record
+	     for debugTrap."
+
+        ::= 18
+
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
+	--
+	--  Specific traps.
+	--
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
+
+
+	diskFailedShutdown	TRAP-TYPE
+	ENTERPRISE	netapp
+	DESCRIPTION
+		"System is shutting down because the system has been
+		running in degraded mode for 24 hours.
+		The trap includes a string describing the failed disk."
+	
+	::= 21
+	
+	diskFailed	TRAP-TYPE
+	ENTERPRISE	netapp
+	DESCRIPTION
+		"One or more disks failed.
+		The trap includes a string describing the failed disk(s)."
+	
+	::= 22
+	
+	diskRepaired	TRAP-TYPE
+	ENTERPRISE	netapp
+	DESCRIPTION
+		"The failed disks have been repaired.
+		This trap is a placeholder -
+		it is not currently sent by ONTAP."
+	
+	::= 26
+	
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
+	--
+	--  The fan and power supply traps are not supported
+	--  on all platforms.
+	--
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
+
+	fanFailureShutdown	TRAP-TYPE
+	ENTERPRISE	netapp
+	DESCRIPTION
+		"Critical chassis or cpu fans have failed and the system
+		is shutting down."
+	
+	::= 31
+	
+	fanFailed	TRAP-TYPE
+	ENTERPRISE	netapp
+	DESCRIPTION
+		"One or more chassis fans failed.
+		The trap includes a string describing the failed fan(s)."
+	
+	::= 33
+	
+	fanWarning	TRAP-TYPE
+	ENTERPRISE	netapp
+	DESCRIPTION
+		"One or more chassis or cpu fans are in warning state.
+		The trap includes a string describing the fan(s) in
+		the warning state."
+	
+	::= 35
+
+	fanRepaired	TRAP-TYPE
+	ENTERPRISE	netapp
+	DESCRIPTION
+		"All fans are repaired."
+	
+	::= 36
+	
+	powerSupplyFailureShutdown	TRAP-TYPE
+	ENTERPRISE	netapp
+	DESCRIPTION
+		"Critical power supplies or power rails failed and
+		the system is shutting down."
+	
+	::= 41
+	
+	powerSupplyFailed	TRAP-TYPE
+	ENTERPRISE	netapp
+	DESCRIPTION
+		"One or more redundant power supplies failed.
+		Include in the trap a string describing
+		the failed power supply(ies)."
+	
+	::= 43
+
+	powerSupplyWarning	TRAP-TYPE
+	ENTERPRISE	netapp
+	DESCRIPTION
+		"One or more power supplies or power rails in
+		warning state. Include in the trap a string describing
+		the power supply(ies) or the power rail(s) in the
+		warning state."
+	
+	::= 45
+	
+	powerSupplyRepaired	TRAP-TYPE
+	ENTERPRISE	netapp
+	DESCRIPTION
+		"Previously-failed power supplies or power rails have been
+		repaired."
+	
+	::= 46
+	
+	cpuTooBusy	TRAP-TYPE
+	ENTERPRISE	netapp
+	DESCRIPTION
+		"CPU utilization exceeds 90%.
+		This trap is not enabled by default.
+		To enable this trap set the registry
+		entry options.monitor.cpu.enable to on. 
+		Note that as the threshold for this trap is
+		checked once a minute it is possible to receive
+		multiple instances of this trap in a short time."
+
+	
+	::= 55
+	
+	cpuOk		TRAP-TYPE
+	ENTERPRISE	netapp
+	DESCRIPTION
+		"CPU utilization has dropped back below 90%.
+		This trap is a placeholder -
+		it is not currently sent by ONTAP."
+	
+	::= 56
+	
+	nvramBatteryDischarged	TRAP-TYPE
+	ENTERPRISE	netapp
+	DESCRIPTION
+		"The NVRAM battery is fully discharged."
+	
+	::= 62
+	
+	nvramBatteryLow	TRAP-TYPE
+	ENTERPRISE	netapp
+	DESCRIPTION
+		"The charge in the NVRAM battery is low."
+	
+	::= 63
+	
+	clusterNodeFailed	TRAP-TYPE
+	ENTERPRISE	netapp
+	DESCRIPTION
+		"A node in a Cluster FailOver configuration failed.
+		Its partner will assume service for the failed node."
+	
+	::= 72
+	
+	clusterNodeTakenOver	TRAP-TYPE
+	ENTERPRISE	netapp
+	DESCRIPTION
+		"The partner has taken over for a failed cluster node."
+	
+	::= 75
+	
+	clusterNodeRepaired	TRAP-TYPE
+	ENTERPRISE	netapp
+	DESCRIPTION
+		"A cluster node has resumed operation."
+	
+	::= 76
+	
+	volumeFull	TRAP-TYPE
+	ENTERPRISE	netapp
+	DESCRIPTION
+		"At least one volume is more than 98% full.
+		The string sent with the trap gives the 
+		name of the volume or volumes which exceed
+		the threshold."
+	
+	::= 82
+	
+	volumeNearlyFull	TRAP-TYPE
+	ENTERPRISE	netapp
+	DESCRIPTION
+		"At least one volume is more than 95% full.
+		The string sent with the trap gives the 
+		name of the volume or volumes which exceed
+		the threshold."
+	
+	::= 85
+	
+	volumeRepaired	TRAP-TYPE
+	ENTERPRISE	netapp
+	DESCRIPTION
+		"All volumes are now under 95% full."
+	
+	::= 86
+	
+	overTempShutdown	TRAP-TYPE
+	ENTERPRISE	netapp
+	DESCRIPTION
+		"System temperature is too high to continue
+		operating.  The system is shutting down."
+	
+	::= 91
+	
+	overTemp	TRAP-TYPE
+	ENTERPRISE	netapp
+	DESCRIPTION
+		"System temperature is too high and in the
+		warning level."
+	
+	::= 95
+	
+	overTempRepaired	TRAP-TYPE
+	ENTERPRISE	netapp
+	DESCRIPTION
+		"System temperature has returned to an
+		acceptable value."
+	
+	::= 96
+	
+	shelfFault	TRAP-TYPE
+	ENTERPRISE	netapp
+	DESCRIPTION
+		"A disk storage shelf reported a fault, probably due
+		to a problem with drive placement, fans, power,
+		or temperature."
+	
+	::= 103
+	
+	
+	shelfRepaired	TRAP-TYPE
+	ENTERPRISE	netapp
+	DESCRIPTION
+		"A previously-reported shelf fault is now corrected."
+	
+	::= 106
+
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
+	--
+	--  This section contains "general health" traps,
+	--  based on changes to the miscGlobalStatus 
+	--  variable.
+	--
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
+
+	globalStatusNonRecoverable	TRAP-TYPE
+	ENTERPRISE	netapp
+	DESCRIPTION
+		"The appliance's overall status changed to
+		'nonRecoverable', indicating a problem so severe
+		that the appliance is shutting down."
+	
+	::= 111
+
+	globalStatusCritical	TRAP-TYPE
+	ENTERPRISE	netapp
+	DESCRIPTION
+		"The appliance's overall status changed to 'critical',
+		indicating a problem that needs immediate attention."
+	
+	::= 113
+
+	globalStatusNonCritical	TRAP-TYPE
+	ENTERPRISE	netapp
+	DESCRIPTION
+		"The appliance's overall status changed to 'nonCritical',
+		indicating a problem that needs attention."
+	
+	::= 115
+	
+	globalStatusOk	TRAP-TYPE
+	ENTERPRISE	netapp
+	DESCRIPTION
+		"The appliance's overall status returned to normal."
+	
+	::= 116
+	
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
+	--
+	--  This section contains traps related to soft quotas.
+	--
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
+
+        softQuotaExceeded	TRAP-TYPE    
+        ENTERPRISE		netapp    
+        DESCRIPTION
+            "A user has exceeded their soft quota limit."
+
+        ::= 126
+
+        softQuotaNormal		TRAP-TYPE    
+        ENTERPRISE		netapp    
+        DESCRIPTION
+            "A user is safely back under their soft quota limit."
+
+        ::= 127
+
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
+	--
+	--  This section contains traps related to autosupport
+	--
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
+
+	autosupportSendError	TRAP-TYPE
+	ENTERPRISE		netapp
+	DESCRIPTION
+		"Unable to send autosupport.
+		The trap includes a string describing the reason for the failure."
+	
+	::= 134
+
+	autosupportConfigurationError	TRAP-TYPE
+	ENTERPRISE			netapp
+	DESCRIPTION
+		"Autosupport may be configured incorrectly.
+		The trap includes a string describing the mis-configuration."
+	
+	::= 135
+	
+	autosupportSent		TRAP-TYPE
+	ENTERPRISE		netapp
+	DESCRIPTION
+		"Autosupport was sent successfully."
+	
+	::= 136
+	
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
+	--
+	--  This section contains traps related to UPS
+	--
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
+	
+	upsLinePowerOff		TRAP-TYPE
+	ENTERPRISE		netapp
+	DESCRIPTION
+		"UPS: Input line power has failed and UPS is now on battery."
+
+	::= 142
+
+	upsBatteryCritical	TRAP-TYPE
+	ENTERPRISE		netapp
+	DESCRIPTION
+		"UPS: Battery is nearly exhausted, starting graceful shutdown."
+
+	::= 143
+
+
+	upsShuttingDown	TRAP-TYPE
+	ENTERPRISE		netapp
+	DESCRIPTION
+		"UPS: Shutting down now: Time left on battery is exhuasted."
+
+	::= 144
+	upsBatteryWarning	TRAP-TYPE
+	ENTERPRISE		netapp
+	DESCRIPTION
+		"UPS: Warning: Time left on battery is getting critical."
+
+	::= 145
+
+	upsLinePowerRetored	TRAP-TYPE
+	ENTERPRISE		netapp
+	DESCRIPTION
+		"UPS:  Input line power has been restored and UPS is now off battery."
+
+	::= 146
+
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+	--
+	--  This section contains traps related to Client Side Applications.
+	--
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+	
+	appEmergency		TRAP-TYPE
+	ENTERPRISE		netapp
+	DESCRIPTION
+		"The application encountered an extremely urgent
+		situation and requires an immediate response."
+
+	::= 151
+
+	appAlert		TRAP-TYPE
+	ENTERPRISE		netapp
+	DESCRIPTION
+		"The application is in a condition that should 
+		be corrected immediately."
+
+	::= 152
+
+	appCritical		TRAP-TYPE
+	ENTERPRISE		netapp
+	DESCRIPTION
+		"The application encountered a critical condition."
+
+	::= 153
+
+	appError		TRAP-TYPE
+	ENTERPRISE		netapp
+	DESCRIPTION
+		"The application encountered an error condition."
+
+	::= 154
+
+	appWarning		TRAP-TYPE
+	ENTERPRISE		netapp
+	DESCRIPTION
+		"The application is in a condition which is not an 
+		error, but which may require special handling."
+
+        ::= 155
+
+	appNotice		TRAP-TYPE
+	ENTERPRISE		netapp
+	DESCRIPTION
+		"The application is notifing of a certain event."
+
+        ::= 156
+
+	appInfo			TRAP-TYPE
+	ENTERPRISE		netapp
+	DESCRIPTION
+		"The application's message is meant for informational 
+		purposes."
+
+        ::= 157
+
+	appTrap			TRAP-TYPE
+	ENTERPRISE		netapp
+	DESCRIPTION
+		"The application requires to be debugged."
+
+        ::= 158
+
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+	--
+	--  This section contains traps related to Autosaving NT EVT files.
+	--
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+	
+	alfFilewrap		TRAP-TYPE
+	ENTERPRISE		netapp
+	DESCRIPTION
+		"The internal audit file has wrapped. You are currently losing event
+		records.Warning the user"
+
+        ::= 162
+	
+
+	alfFileSaved	TRAP-TYPE
+	ENTERPRISE		netapp
+	DESCRIPTION
+		"The internal audit log has been autosaved to an external evt file.
+		Notifying the user."
+
+        ::= 166
+
+	alfFileNearlyFull	TRAP-TYPE
+	ENTERPRISE			netapp
+	DESCRIPTION
+		"The internal audit log file is nearly full. The file is going to 
+		wrap. Notifying the user"
+
+        ::= 167
+
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+	--
+	--  This section contains traps related to generalized quota events.
+	--
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+
+        quotaExceeded		TRAP-TYPE    
+        ENTERPRISE		netapp    
+        DESCRIPTION
+            "One of the quota limits has been exceeded.
+	    The trap includes a string describing the specific event
+	    which triggered the trap.  The string is structured
+	    in the following form:
+
+		Quota Event: status=exceeded, type={hard|soft|threshold},
+		user={username}, volume={volume}, limit_item={files|disk},
+		limit_value={#files|#kilobytes}
+		[ , treeid={tree-id} ] [ , vfiler={vfiler} ]
+
+	    An example of a complete message would be:
+
+		Quota Event: status=exceeded, type=soft,
+		user=admin, volume=vol1, limit_item=disk, limit_value=1000000,
+		treeid=8
+
+	    Additional key=value items may, in the future, be appended
+	    to this message."
+
+        ::= 176
+
+        quotaNormal		TRAP-TYPE    
+        ENTERPRISE		netapp    
+        DESCRIPTION
+            "One of the quota limits has gone back down to a normal level.
+	    The trap includes a string describing the specific event
+	    which triggered the trap.  The string is structured
+	    in the following form:
+
+		Quota Event: status=normal, type={hard|soft|threshold},
+		user={username}, volume={volume}, limit_item={files|disk},
+		limit_value={#files|#kilobytes}
+		[ , treeid={tree-id} ] [ , vfiler={vfiler} ]
+
+	    An example of a complete message would be:
+
+		Quota Event: status=normal, type=soft,
+		user=admin, volume=vol1, limit_item=disk, limit_value=1000000,
+		treeid=8
+
+	    Additional key=value items may, in the future, be appended
+	    to this message."
+
+        ::= 177
+
+        -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+	--
+	--  This section contains traps related to alerting when 64MB directory
+	--  limit is nearly reached or has been reached.
+	--
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+
+	waflDirFull			TRAP-TYPE
+	ENTERPRISE			netapp
+	DESCRIPTION
+		"The directory has been filled to its limit"
+
+        ::= 187
+
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+	--
+	--  This section contains traps related to Correctable Memory ECC 
+	--  errors
+	--
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+	
+	eccSummary		TRAP-TYPE
+	ENTERPRISE		netapp
+	DESCRIPTION
+		"Memory ECC: number of new correctable ECC errors"
+
+	::= 192
+
+	eccMasked		TRAP-TYPE
+	ENTERPRISE		netapp
+	DESCRIPTION
+		"Memory ECC: High frequency of ECC errors"
+
+	::= 195
+
+       	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+	--
+	--  This section contains traps related to ftpd service
+	--
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+
+	ftpdError			TRAP-TYPE
+	ENTERPRISE			netapp
+	DESCRIPTION
+		"Ftp daemon: service stopped"
+
+        ::= 204
+
+	ftpdMaxConnNotice		TRAP-TYPE
+	ENTERPRISE			netapp
+	DESCRIPTION
+		"Ftp daemon: number of connections hits maximum number"
+
+        ::= 206
+
+       	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+	--
+	--  This section contains additional traps related to ftpd service
+	--
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+
+	ftpdMaxConnThresholdNotice	TRAP-TYPE
+	ENTERPRISE			netapp
+	DESCRIPTION
+		"Ftp daemon: number of connections nearly hits maximum number"
+
+        ::= 216
+
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+	--
+	--  This section contains traps related to SCSI Target 
+	--
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+
+	scsitgtFCPLinkBreak TRAP-TYPE
+	ENTERPRISE		netapp
+	DESCRIPTION
+		"SCSI Target: Link Break on FCP adapter"
+
+	::= 222
+
+	scsitgtPartnerPathMisconfigured	TRAP-TYPE
+	ENTERPRISE		netapp
+	DESCRIPTION
+		"SCSI Target: FCP Partner Path Misconfigured"
+
+	::= 224
+
+	scsitgtThrottleNotice		TRAP-TYPE
+	ENTERPRISE		netapp
+	DESCRIPTION
+		"SCSI Target: Throttle limit event notification"
+
+	::= 226
+
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+	--
+	--  This section contains traps related to VIF Failover & Link Status
+	--
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+
+	vifPrimaryLinkFailed		TRAP-TYPE
+	ENTERPRISE		netapp
+	DESCRIPTION
+		"Vif: The primary Interface on a Single mode vif has failed"
+
+	::= 237
+
+	vifAllLinksFailed		TRAP-TYPE
+	ENTERPRISE		netapp
+	DESCRIPTION
+		"Vif: All the links of the vif have failed"
+
+	::= 238
+
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+	--
+	--  This section contains traps related to Vfiler status
+	--
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+
+        vfStopped       TRAP-TYPE
+	ENTERPRISE      netapp
+        DESCRIPTION     "A vFiler has stopped."
+	
+	::= 245
+
+        vfStarted       TRAP-TYPE
+	ENTERPRISE      netapp
+        DESCRIPTION     "A vFiler has started."
+
+	::= 246
+
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+	--
+	--  This section contains traps related to Virus Scanning
+	--
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+
+	vscanVirusDetectedError	TRAP-TYPE
+	ENTERPRISE		netapp
+	DESCRIPTION
+		"VScan: A virus scanner has detected a virus on the Filer"
+
+	::= 254
+
+	vscanDisConnection		TRAP-TYPE
+	ENTERPRISE		netapp
+	DESCRIPTION
+		"VScan: A virus scanner has dropped its connection from the Filer"
+
+	::= 255	
+
+	vscanConfigurationChange	TRAP-TYPE
+	ENTERPRISE		netapp
+	DESCRIPTION
+		"VScan: There has been a change to the vscan configuration"
+	::= 256
+
+	vscanConnection		TRAP-TYPE
+	ENTERPRISE		netapp
+	DESCRIPTION
+		"VScan: A virus scanner has made a connection to the Filer"
+
+	::= 257
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+	--
+	--  This section contains additional traps related to Virus Scanning
+	--
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+
+	vscanServerUpgrade	TRAP-TYPE
+	ENTERPRISE		netapp
+	DESCRIPTION
+		"VScan: The Vscan server has been upgraded"
+
+	::= 266
+
+        -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -
+	-- 
+	--  This section contains traps related to volume status being offline,
+	--  online or restricted
+	-- 
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -
+
+	volumeRestrictedByMirrorBigIo   TRAP-TYPE 
+	ENTERPRISE              	netapp 
+	DESCRIPTION 
+		"A volume that experienced a medium error during reconstruction 
+		is restricted and marked wafl-inconsistent, but starting 
+		wafliron has failed. This trap is issued to alert operator 
+		that a volume is not accessible and wafliron must be started 
+		to allow access to it."
+
+	::= 272
+
+	volumeInconsistentUmount        TRAP-TYPE 
+	ENTERPRISE              	netapp 
+	DESCRIPTION 
+		"This trap is issued when we unmount a volume due to an 
+		inconsistency."
+
+	::= 274
+
+	volumeStateChanged              TRAP-TYPE 
+	ENTERPRISE              	netapp 
+	DESCRIPTION 
+		"Volume is being taken offline or being restricted. 
+		The string sent with trap specifies name of affected volume 
+		and its state."
+
+	::= 275
+
+	volumeOnline           		TRAP-TYPE 
+	ENTERPRISE             		netapp 
+	DESCRIPTION 
+		"Volume is online now. The string sent with trap specifies 
+		name of volume which is online now."
+
+	::= 276
+
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -
+	-- 
+	--  This section contains traps related to remote management 
+	--  controller (RMC) card status
+	-- 
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -
+
+	rmcCardNeedsReplacement		TRAP-TYPE
+	ENTERPRISE             		netapp 
+	DESCRIPTION 
+		"Remote Management Controller card needs replacement. The trap 
+		includes a string specifying the reason for replacement"
+
+	::= 283
+
+	rmcCardMissingCables		TRAP-TYPE
+	ENTERPRISE             		netapp 
+	DESCRIPTION 
+		"Remote Management Controller card is missing its internal 
+		cable, or LAN cable or power supply cable. The trap includes 
+		a string specifing the missing component."  
+
+	::= 284
+
+        -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -
+	-- 
+	--  This section contains traps related to remote volume 
+	-- 
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -
+
+	volumeRemoteUnreachable		TRAP-TYPE 
+	ENTERPRISE             		netapp 
+	DESCRIPTION 
+		"Local volume encountered an error while communicating
+		to remote volume."
+
+	::= 294
+
+	volumeRemoteOk			TRAP-TYPE 
+	ENTERPRISE              	netapp 
+	DESCRIPTION 
+		"The communication between remote volume and local volume 
+		returned to normal."
+
+	::= 296
+
+	volumeRemoteRestored		TRAP-TYPE 
+	ENTERPRISE              	netapp 
+	DESCRIPTION 
+		"The data on remote volume has been fully restored to local
+		volume."
+
+	::= 297
+
+	volumeRemoteRestoreBegin	TRAP-TYPE 
+	ENTERPRISE              	netapp 
+	DESCRIPTION 
+		"The data on remote volume has started being restored to local
+		volume by Restore-on-Demand."
+
+	::= 298
+
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -
+	-- 
+	--  This section contains more traps related to volume status being 
+	--  offline, online or restricted
+	-- 
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -
+
+	volumeRestrictedRootConflict        TRAP-TYPE 
+	ENTERPRISE              	    netapp 
+	DESCRIPTION 
+		"Volume is restricted due to a root volume conflict. The 
+		string sent with trap specifies name of conflicting volume 
+		which is being restricted."
+
+	::= 304
+	
+	volumeOfflineTooBig       	TRAP-TYPE 
+	ENTERPRISE              	netapp 
+	DESCRIPTION 
+		"Volume can not be brought online because its raw size is 
+		larger than maximum allowed size. The string sent with trap 
+		specifies name of affected volume and its raw size, and 
+		maximum allowed size."
+
+	::= 314
+
+	volumeOffline                   TRAP-TYPE 
+	ENTERPRISE              	netapp 
+	DESCRIPTION 
+		"Volume is being taken offline. The string sent with trap 
+		specifies name of affected volume and reason for being 
+		taken offline."
+
+	::= 324
+
+	volumeRestricted                TRAP-TYPE 
+	ENTERPRISE              	netapp 
+	DESCRIPTION 
+		"Volume is being restricted. The string sent with trap 
+		specifies name of affected volume and reason for being 
+		restricted."
+
+	::= 334
+
+	volumeDegradedDirty             TRAP-TYPE 
+	ENTERPRISE              	netapp 
+	DESCRIPTION 
+		"Volume is degraded and has dirty parity. WAFL_check must be 
+		run on this volume before it can be brought online. The string
+		sent with trap specifies name of affected volume."
+
+	::= 344
+
+	volumeError             	TRAP-TYPE 
+	ENTERPRISE              	netapp 
+	DESCRIPTION 
+		"This trap is issued when a volume can not be brought online 
+		due to an error.  The string sent with trap specifies name of 
+		affected volume and error description."
+
+	::= 354
+	
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -
+	-- 
+	--  This section contains traps related to synchronous SnapMirror
+	-- 
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -
+	snapmirrorSyncFailed		TRAP-TYPE
+	ENTERPRISE             		netapp    
+	DESCRIPTION 
+	        "Synchronous SnapMirror failed and went into asynchronous mode."
+        ::= 364
+
+	snapmirrorSyncOk		TRAP-TYPE
+	ENTERPRISE             		netapp    
+	DESCRIPTION 
+	        "Synchronous SnapMirror went into synchronous mode."
+        ::= 366
+
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -
+	-- 
+	--  New environmental traps
+	-- 
+	--  A series of new environmental traps are constructed
+	--  to disambiguate many of the older traps (which are antiquated
+	--  but remain until they are completely removed from EMS usage).
+	-- 
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -
+
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -
+	-- Chassis Temperature
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -
+
+	chassisTemperatureShutdown	TRAP-TYPE
+	ENTERPRISE			netapp
+	DESCRIPTION
+		"The chassis temperature is extreme.  The appliance has
+		initiated a shutdown to protect itself.  The operating
+		environment should be monitored and corrected before
+		restarting the appliance."
+
+	::= 371
+
+	chassisTemperatureWarning	TRAP-TYPE
+	ENTERPRISE			netapp
+	DESCRIPTION
+		"The chassis temperature is either too high or too low.
+		The temperature should be monitored and, if possible, corrected."
+
+	::= 372
+
+	chassisTemperatureUnknown	TRAP-TYPE
+	ENTERPRISE			netapp
+	DESCRIPTION
+		"The chassis temperature is unknown, because reading can't be
+		obtained from the chassis temperature sensor."
+
+	::= 375
+
+	chassisTemperatureOk		TRAP-TYPE
+	ENTERPRISE			netapp
+	DESCRIPTION
+		"The chassis temperature is OK."
+
+	::= 376
+
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -
+	-- CPU Fans
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -
+
+	chassisCPUFanStopped		TRAP-TYPE
+	ENTERPRISE			netapp
+	DESCRIPTION
+		"One or more CPU fans have stopped.  The appliance
+		has initiated a shutdown to protect itself.  A new
+		motherboard may be required to correct the fan.
+		Contact Network Appliance for direction."
+
+	::= 381
+
+	chassisCPUFanSlow		TRAP-TYPE
+	ENTERPRISE			netapp
+	DESCRIPTION
+		"A CPU fan is spinning too slowly.  A new motherboard
+		may be required to correct the fan.  Contact Network
+		Appliance for direction."
+
+	::= 383
+
+	chassisCPUFanOk			TRAP-TYPE
+	ENTERPRISE			netapp
+	DESCRIPTION
+		"All CPU fan(s) are properly functioning."
+
+	::= 386
+
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -
+	-- Power Supplies
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -
+
+	chassisPowerSuppliesFailed	TRAP-TYPE
+	ENTERPRISE			netapp
+	DESCRIPTION
+		"Multiple chassis power supplies failed."
+
+	::= 391
+
+	chassisPowerSupplyDegraded	TRAP-TYPE
+	ENTERPRISE			netapp
+	DESCRIPTION
+		"One or more chassis power supplies are degraded.
+		A description of the degraded state has been
+		logged to the console and message log file."
+
+	::= 392
+
+	chassisPowerSupplyFailed	TRAP-TYPE
+	ENTERPRISE			netapp
+	DESCRIPTION
+		"One chassis power supply failed."
+
+	::= 393
+
+	chassisPowerSupplyRemoved	TRAP-TYPE
+	ENTERPRISE			netapp
+	DESCRIPTION
+		"One or more chassis power supplies are removed."
+
+	::= 394
+
+	chassisPowerSupplyOff		TRAP-TYPE
+	ENTERPRISE			netapp
+	DESCRIPTION
+		"One or more chassis power supplies are off."
+
+	::= 395
+
+	chassisPowerSuppliesOk		TRAP-TYPE
+	ENTERPRISE			netapp
+	DESCRIPTION
+		"The chassis power supplies are all functioning properly."
+
+	::= 396
+
+	chassisPowerSupplyOk		TRAP-TYPE
+	ENTERPRISE			netapp
+	DESCRIPTION
+		"This chassis power supply is functioning properly." 
+
+	::= 397
+
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -
+	-- Power Rails
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -
+
+	chassisPowerDegraded		TRAP-TYPE
+	ENTERPRISE			netapp
+	DESCRIPTION
+		"The power within the chassis is degraded.
+		A description of the degraded state has been
+		logged to the console and message log file."
+
+	::= 403
+
+	chassisPowerOk			TRAP-TYPE
+	ENTERPRISE			netapp
+	DESCRIPTION
+		"The power within the chassis is functioning properly."
+
+	::= 406
+
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -
+	-- Chassis Fans
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -
+
+	chassisFanDegraded		TRAP-TYPE
+	ENTERPRISE			netapp
+	DESCRIPTION
+		"A chassis fan has been degraded."
+
+	::= 412
+
+	chassisFanRemoved		TRAP-TYPE
+	ENTERPRISE			netapp
+	DESCRIPTION
+		"A chassis fan FRU has been removed."
+
+	::= 413
+
+	chassisFanStopped		TRAP-TYPE
+	ENTERPRISE			netapp
+	DESCRIPTION
+		"One or more chassis fans have stopped."
+
+	::= 414
+
+	chassisFanWarning		TRAP-TYPE
+	ENTERPRISE			netapp
+	DESCRIPTION
+		"One or more chassis fans is spinning slowly or too fast."
+
+	::= 415
+
+	chassisFanOk			TRAP-TYPE
+	ENTERPRISE			netapp
+	DESCRIPTION
+		"All chassis fans are functioning properly."
+
+	::= 416
+
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -
+	-- Volume SnapValidator errors
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -
+
+	writeVerificationFailed		TRAP-TYPE
+	ENTERPRISE			netapp
+	DESCRIPTION
+		"A write has failed a verification test 
+		on a SnapValidator enabled volume."
+	::= 424
+
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -
+	-- CIFS domain controller-related traps
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -
+
+	domainControllerDisconnect      TRAP-TYPE
+	ENTERPRISE			netapp
+	DESCRIPTION
+		"A CIFS domain controller connection to the filer has failed."
+	::= 435
+
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -
+	--  This section contains traps related to plex state 
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -
+
+	plexFailed             		TRAP-TYPE 
+	ENTERPRISE              	netapp 
+	DESCRIPTION 
+		"This trap is issued when one plex of a mirrored 
+		traditional volume or aggregate is failed. The string 
+		sent with this trap specifies name of affected plex or
+		mirrored traditional volume or aggregate."
+	::= 444
+
+	plexOffline            		TRAP-TYPE 
+	ENTERPRISE              	netapp 
+	DESCRIPTION 
+		"This trap is issued when a plex becomes offline. 
+		The string sent with this trap specifies name of 
+		affected plex or mirrored traditional volume or aggregate."
+	::= 454
+
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -
+	--  This section contains traps related to maxdirsize.
+	-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -
+
+ 	maxDirSizeAlert			TRAP-TYPE 
+	ENTERPRISE			netapp 
+	DESCRIPTION
+		"A directory has reached it's maxdirsize limit. Either 
+		increase the maxdirsize or clean up the directory."
+	::= 482
+
+ 	maxDirSizeWarning		TRAP-TYPE 
+	ENTERPRISE			netapp 
+	DESCRIPTION
+		"A directory is getting close to it's maxdirsize limit. Either
+		increase the maxdirsize or clean up the directory."
+	::= 485
+
+        -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -
+	-- End of NetApp trap definitions
+	-- 
+	-- Note: Please update this comment when adding a new TRAP-TYPE.
+	--       The next trap set range should be: 49x
+	-- 
+	--	 The 10xxx trap range is used by DataFabric Manager
+	--	     (netappDataFabricManager) see the DFM MIB for further
+	--	     information.
+	--
+	--	 The 20xxx trap range is used by the NetApp Support Console
+	--	     (netappSupportConsole) see the NASC MIB for further 
+	--	     information.
+	--
+	-- The 'ones' digit of the trap contains the priority of the trap:
+	--
+	-- 1 emergency
+	-- 2 alert
+	-- 3 critical
+	-- 4 error
+	-- 5 warning
+	-- 6 notification
+	-- 7 information
+	-- 8 debug
+	-- 
+        -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -
+
+	END