Initial commitHEADmain

4 files changed, 2272 insertions, 0 deletions

diff --git a/MIBS/mimosa/MIMOSA-MIB-TC b/MIBS/mimosa/MIMOSA-MIB-TC
new file mode 100644
index 0000000..c30f0a3
--- /dev/null
+++ b/MIBS/mimosa/MIMOSA-MIB-TC
@@ -0,0 +1,90 @@
+MIMOSA-MIB-TC DEFINITIONS ::= BEGIN
+
+--  Copyright (C) 2017, Mimosa Networks, Inc. All Rights Reserved.
+--
+--  Mimosa Networks MIB
+--  Revision: 1.00
+--  Date: February 15, 2017
+--
+--  Mimosa Networks, Inc.
+--  469 El Camino Real, Suite 100
+--  Santa Clara, CA 95050
+--  support@mimosa.co
+--
+--  This MIB defines the base MIB specification for Mimosa Network's
+--  products.
+--
+--  Mimosa reserves the right to make changes to this MIB specification as
+--  well as other information related to this specification without prior
+--  notice.  The user of this specification should consult Mimosa Networks,
+--  to determine if any such changes have been made.
+--
+--  Current MIBs are available from Mimosa Networks at the following URLs:
+--
+--      http://help.mimosa.co
+--
+--  In no event shall Mimosa Networks, Inc. be liable for any indirect,
+--  consequential, special or incidental damages whatsoever (including
+--  but not limited to lost profits or lost revenue) arising out of or
+--  related to this specification or the information contained in it.
+--  This non-liability extends to even if Mimosa Networks Inc. has been
+--  advised of, known, or should have known, the potential for such damages.
+--  Mimosa Networks, Inc. hereby grants end-users, and other parties a                                                                                         
+--  a non-exclusive license to use this MIB specification in order to
+--  manage products of Mimosa Networks, Inc.
+
+IMPORTS
+    MODULE-IDENTITY, Integer32              FROM SNMPv2-SMI
+    TEXTUAL-CONVENTION                      FROM SNMPv2-TC
+    mimosa                                  FROM MIMOSA-NETWORKS-BASE-MIB;
+
+mimosaMibTC     MODULE-IDENTITY
+    LAST-UPDATED    "201702150000Z"
+    ORGANIZATION "Mimosa Networks
+    			  www.mimosa.co"
+    CONTACT-INFO
+    	"postal:
+    	Mimosa Networks, Inc.
+		469 El Camino Real, Suite 100
+		Santa Clara, CA 95050
+        email: support@mimosa.co"
+    DESCRIPTION
+		"Mimosa device MIB definitions"
+	REVISION	"201702150000Z"
+    DESCRIPTION
+		"First Revision of Textual Conventions defined for MIMOSA-MIB modules."
+    ::= { mimosa 3 }
+
+-- *****************************************************************
+-- ***                   Mimosa Textual Conventions              ***
+-- *****************************************************************
+
+DecimalOne ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d-1"
+    STATUS       current
+    DESCRIPTION  "Fixed point, one decimal"
+    SYNTAX       Integer32
+
+DecimalTwo ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d-2"
+    STATUS       current
+    DESCRIPTION  "Fixed point, two decimals"
+    SYNTAX       Integer32
+
+DecimalFive ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d-5"
+    STATUS       current
+    DESCRIPTION  "Fixed point, five decimals"
+    SYNTAX       Integer32
+
+Mimosa5GHzFrequency ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION  "Represents the frequency in the range of 4800 to 6200"
+    SYNTAX       Integer32 (4800..6200)
+
+Mimosa5GHzChannelNumber ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION  "Reprensents the channel Wifi ChannelWidth"
+    SYNTAX       Integer32
+
+END
diff --git a/MIBS/mimosa/MIMOSA-NETWORKS-BASE-MIB b/MIBS/mimosa/MIMOSA-NETWORKS-BASE-MIB
new file mode 100644
index 0000000..e440122
--- /dev/null
+++ b/MIBS/mimosa/MIMOSA-NETWORKS-BASE-MIB
@@ -0,0 +1,188 @@
+MIMOSA-NETWORKS-BASE-MIB DEFINITIONS ::= BEGIN
+
+--  Copyright (C) 2015, Mimosa Networks, Inc. All Rights Reserved.
+--
+--  Mimosa Networks MIB
+--  Revision: 1.00
+--  Date: June 03, 2015
+--
+--  Mimosa Networks, Inc.
+--  300 Orchard City Dr.
+--  Campbell, CA 95008
+--  support@mimosa.co
+--
+--  This MIB defines the base MIB specification for Mimosa Network's
+--  products.
+--
+--  Mimosa reserves the right to make changes to this MIB specification as
+--  well as other information related to this specification without prior
+--  notice.  The user of this specification should consult Mimosa Networks,
+--  to determine if any such changes have been made.
+--
+--  Current MIBs are available from Mimosa Networks at the following URLs:
+--
+--		http://help.mimosa.co
+--
+--  In no event shall Mimosa Networks, Inc. be liable for any indirect,
+--  consequential, special or incidental damages whatsoever (including
+--  but not limited to lost profits or lost revenue) arising out of or
+--  related to this specification or the information contained in it.
+--  This non-liability extends to even if Mimosa Networks Inc. has been
+--  advised of, known, or should have known, the potential for such damages.
+
+--  Mimosa Networks, Inc. hereby grants end-users, and other parties a
+--  a non-exclusive license to use this MIB specification in order to
+--  manage products of Mimosa Networks, Inc.
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, Integer32,
+    NOTIFICATION-TYPE            			FROM SNMPv2-SMI
+    OBJECT-GROUP, NOTIFICATION-GROUP		FROM SNMPv2-CONF
+    enterprises				     			FROM RFC1155-SMI 
+    ifIndex						 			FROM IF-MIB;
+
+
+-- EXPORTS mimosa...
+mimosa MODULE-IDENTITY
+    LAST-UPDATED "201506030000Z"
+    ORGANIZATION "Mimosa Networks
+    			  www.mimosa.co"
+    CONTACT-INFO
+    	"postal:
+    	Mimosa Networks, Inc.
+		300 Orchard City Dr.
+		Campbell, CA 95008
+        email: support@mimosa.co"
+    DESCRIPTION
+		"Mimosa device MIB definitions"
+	REVISION	"201506030000Z"
+    DESCRIPTION
+		"First draft"
+    ::= { enterprises 43356 }
+    
+--mimosa                        OBJECT IDENTIFIER ::= { enterprises 43356 }
+
+mimosaProduct                 OBJECT IDENTIFIER ::= { mimosa 1 }
+mimosaMgmt                    OBJECT IDENTIFIER ::= { mimosa 2 }
+
+
+mimosaHardware                OBJECT IDENTIFIER ::= { mimosaProduct 1 }
+mimosaSoftware                OBJECT IDENTIFIER ::= { mimosaProduct 2 }
+
+mimosaB5                      OBJECT IDENTIFIER ::= { mimosaHardware 1 }
+mimosaB5Lite                  OBJECT IDENTIFIER ::= { mimosaHardware 2 }
+mimosaA5                      OBJECT IDENTIFIER ::= { mimosaHardware 3 }
+mimosaC5                      OBJECT IDENTIFIER ::= { mimosaHardware 4 }
+
+mimosaTrap                    OBJECT IDENTIFIER ::= { mimosaMgmt 0 }
+mimosaMib                     OBJECT IDENTIFIER ::= { mimosaMgmt 1 }
+mimosaMIBGroups               OBJECT IDENTIFIER ::= { mimosaMgmt 3 }
+mimosaConformanceGroup        OBJECT IDENTIFIER ::= { mimosaMgmt 4 }
+
+mimosaTrapMib                 OBJECT IDENTIFIER ::= { mimosaMib 1 }
+mimosaWireless                OBJECT IDENTIFIER ::= { mimosaMib 2 }
+
+
+-- **********************************************************************
+-- ***       Mimosa General MIB variables are specified below.        ***
+-- ***       These varbinds are common to all Mimosa products.        ***
+-- **********************************************************************
+
+mimosaTrapMIBGroup OBJECT-GROUP
+    OBJECTS { mimosaTrapMessage,
+              mimosaOldSpeed,
+              mimosaNewSpeed
+            }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing basic Trap function."
+    ::= { mimosaMIBGroups 1 }
+
+
+mimosaTrapMessage OBJECT-TYPE
+    SYNTAX OCTET STRING
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "General Octet String object to contain message sent with traps."
+    ::= { mimosaTrapMib 1 }
+
+mimosaOldSpeed OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The speed of the Ethernet link before the change within Ethernet
+         Speed Change Notifications."
+    ::= { mimosaTrapMib 2 }
+
+mimosaNewSpeed OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The speed of the Ethernet link after the change within Ethernet
+         Speed Change Notifications."
+    ::= { mimosaTrapMib 3 }
+
+
+-- **********************************************************************
+-- ***       Mimosa Generic Traps are specified below.                ***
+-- ***       These traps are common to all Mimosa products.           ***
+-- **********************************************************************
+
+mimosaGenericNotificationsGroup NOTIFICATION-GROUP
+    NOTIFICATIONS { mimosaCriticalFault, mimosaTempWarning,
+    				mimosaTempNormal, mimosaEthernetSpeedChange }
+    STATUS        current
+    DESCRIPTION
+       "The basic Trap notifications for all Mimosa products."
+    ::= { mimosaMIBGroups 2 }
+
+
+mimosaCriticalFault NOTIFICATION-TYPE
+    OBJECTS { mimosaTrapMessage }
+    STATUS current
+    DESCRIPTION
+        "The mimosaCriticalFault notification is sent when the log manager
+         in the Mimosa product determines that a fault with a critical
+         severity has been detected. The mimosaCriticalFaultLog contains
+         the description of the general error."
+    ::= {mimosaTrap 1 }
+
+mimosaTempWarning NOTIFICATION-TYPE
+    OBJECTS { mimosaTrapMessage }
+    STATUS current
+    DESCRIPTION
+        "The mimosaTempWarning notification is sent when the log manager in
+         the Mimosa product receives an indication that the temperature is
+         outside the safe range."
+    ::= {mimosaTrap 2 }
+
+mimosaTempNormal NOTIFICATION-TYPE
+    OBJECTS { mimosaTrapMessage }
+    STATUS current
+    DESCRIPTION
+        "The mimosaTempNormal notification is sent when the log manager in the
+         Mimosa product receives an indication that the temperature is with
+         in the safe range."
+    ::= {mimosaTrap 3 }
+
+mimosaEthernetSpeedChange NOTIFICATION-TYPE
+    OBJECTS  { ifIndex, mimosaOldSpeed, mimosaNewSpeed }
+    STATUS   current
+    DESCRIPTION
+        "The mimosaEthernetSpeedChange notification is sent when the log manager
+         in the Mimosa product determines that a speed change on the Ethernet
+         port was detected. The mimosaOldSpeed and mimosaNewSpeed indicates the
+         speed in bits per second of the change. ifIndex is used per the ifTable
+         in the IF-MIB."
+    ::= {mimosaTrap 4 }
+
+-- Note the following publicly defined traps are also used for Mimosa Product
+-- Notifications:
+--
+-- From SNMPv2-MIB:	coldStart, warmStart, linkUp, LinkDown and
+--                      authenticationFailure
+END
+
diff --git a/MIBS/mimosa/MIMOSA-NETWORKS-BFIVE-MIB b/MIBS/mimosa/MIMOSA-NETWORKS-BFIVE-MIB
new file mode 100644
index 0000000..496d0bb
--- /dev/null
+++ b/MIBS/mimosa/MIMOSA-NETWORKS-BFIVE-MIB
@@ -0,0 +1,958 @@
+MIMOSA-NETWORKS-BFIVE-MIB DEFINITIONS ::= BEGIN
+
+--  Copyright (C) 2017, Mimosa Networks, Inc. All Rights Reserved.
+--
+--  Mimosa Networks MIB
+--  Revision: 1.02
+--  Date: April 28, 2017
+--
+--  Mimosa Networks, Inc.
+--  469 El Camino Real Ste 100
+--  Santa Clara, CA 95050
+--  support@mimosa.co
+--
+--  This MIB defines the MIB specification for Mimosa Network's Products
+--
+--  Mimosa reserves the right to make changes to this MIB specification as
+--  well as other information related to this specification without prior
+--  notice.  The user of this specification should consult Mimosa Networks,
+--  to determine if any such changes have been made.
+--
+--  Current MIBs are available from Mimosa Networks at the following URLs:
+--
+--		http://help.mimosa.co
+--
+--  In no event shall Mimosa Networks, Inc. be liable for any indirect,
+--  consequential, special or incidental damages whatsoever (including
+--  but not limited to lost profits or lost revenue) arising out of or
+--  related to this specification or the information contained in it.
+--  This non-liability extends to even if Mimosa Networks Inc. has been
+--  advised of, known, or should have known, the potential for such damages.
+
+--  Mimosa Networks, Inc. hereby grants end-users, and other parties a
+--  a non-exclusive license to use this MIB specification in order to
+--  manage products of Mimosa Networks, Inc.
+
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE,
+    NOTIFICATION-TYPE, Integer32,
+    Counter32, Counter64, Unsigned32,
+    TimeTicks, IpAddress                  FROM SNMPv2-SMI
+
+    DisplayString , MacAddress,
+    RowStatus, TruthValue,
+    PhysAddress, TEXTUAL-CONVENTION       FROM SNMPv2-TC
+
+    MODULE-COMPLIANCE, OBJECT-GROUP,
+    NOTIFICATION-GROUP 	                  FROM SNMPv2-CONF
+
+    ifIndex                               FROM IF-MIB
+    mimosaWireless,
+    mimosaConformanceGroup                FROM MIMOSA-NETWORKS-BASE-MIB;
+
+mimosaB5Module MODULE-IDENTITY
+    LAST-UPDATED "201506030000Z"
+    ORGANIZATION "Mimosa Networks
+    			  www.mimosa.co"
+    CONTACT-INFO
+    	"postal:
+    	Mimosa Networks, Inc.
+		469 El Camino Real Ste 100
+		Santa Clara, CA 95050
+        email: support@mimosa.co"
+    DESCRIPTION
+		"Mimosa device MIB definitions"
+	REVISION	"201704280000Z"
+    DESCRIPTION
+		"Compatible with Firmware 1.4.5"
+    ::= { mimosaConformanceGroup 1 }
+
+mimosaGeneral       OBJECT IDENTIFIER ::= { mimosaWireless 1 }
+mimosaLocInfo       OBJECT IDENTIFIER ::= { mimosaWireless 2 }
+mimosaWanInfo       OBJECT IDENTIFIER ::= { mimosaWireless 3 }
+mimosaTdmaInfo      OBJECT IDENTIFIER ::= { mimosaWireless 4 }
+mimosaMgmtInfo      OBJECT IDENTIFIER ::= { mimosaWireless 5 }
+mimosaRfInfo        OBJECT IDENTIFIER ::= { mimosaWireless 6 }
+mimosaPerfInfo      OBJECT IDENTIFIER ::= { mimosaWireless 7 }
+mimosaServices      OBJECT IDENTIFIER ::= { mimosaWireless 8 }
+
+
+-- *****************************************************************
+-- ***                   Mimosa Textual Conventions              ***
+-- *****************************************************************
+DecimalOne ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d-1"
+    STATUS       current
+    DESCRIPTION  "Fixed point, one decimal"
+    SYNTAX       Integer32
+
+DecimalTwo ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d-2"
+    STATUS       current
+    DESCRIPTION  "Fixed point, two decimals"
+    SYNTAX       Integer32
+
+DecimalFive ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d-5"
+    STATUS       current
+    DESCRIPTION  "Fixed point, five decimals"
+    SYNTAX       Integer32
+
+-- *****************************************************************
+-- ***       Mimosa General variables are specified below.    ***
+-- *****************************************************************
+
+mimosaDeviceName OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE (0..64))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The name of the local Mimosa device. This unique identifier could
+         be the same as the sysName object."
+    ::= { mimosaGeneral 1 }
+
+mimosaSerialNumber OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE (0..64))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The unique serial number of the Mimosa device."
+    ::= { mimosaGeneral 2 }
+
+mimosaFirmwareVersion OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE (0..64))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The version of the currently installed and/or running firmware
+         on the Mimosa device."
+    ::= { mimosaGeneral 3 }
+
+mimosaFirmwareBuildDate OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE (0..64))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The creation date of the currently installed and/or running
+         firmware on the Mimosa device."
+    ::= { mimosaGeneral 4 }
+
+mimosaLastRebootTime OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE (0..64))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The last time the Mimosa device rebooted."
+    ::= { mimosaGeneral 5 }
+
+mimosaUnlockCode OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE (0..64))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The code used to unlock the Mimosa device."
+    ::= { mimosaGeneral 6 }
+
+mimosaLEDBrightness OBJECT-TYPE
+    SYNTAX  INTEGER {
+                auto(1),
+                low(2),
+                medium(3),
+                high(4)
+            }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Indicates the intensity of the status indicator lights on the
+         device exterior. The Auto option adjusts the amount of light
+         based upon ambient conditions. Manual options include Low,
+         Medium, and High."
+    ::= { mimosaGeneral 7 }
+
+mimosaInternalTemp OBJECT-TYPE
+    SYNTAX       DecimalOne
+    UNITS        "C" 
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "The internal temperature of the Mimosa device."
+    ::= { mimosaGeneral 8 }
+
+mimosaRegulatoryDomain OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE (0..64))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The country in which the Mimosa device has been configured to run."
+    ::= { mimosaGeneral 9 }
+
+
+-- **********************************************************************
+-- ***     Mimosa Device Location variables are specified below.      ***
+-- **********************************************************************
+
+mimosaLongitude OBJECT-TYPE
+    SYNTAX       DecimalFive
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "The Longitude of the Mimosa device location, in 5 decimal points."
+    ::= { mimosaLocInfo 1 }
+
+mimosaLatitude OBJECT-TYPE
+    SYNTAX       DecimalFive
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "The Latitude of the Mimosa device location, in 5 decimal points."
+    ::= { mimosaLocInfo 2 }
+
+mimosaAltitude OBJECT-TYPE
+    SYNTAX      Integer32
+    UNITS       "meters" 
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The Altitude of the Mimosa device location in meters."
+    ::= { mimosaLocInfo 3 }
+
+mimosaSatelliteSNR OBJECT-TYPE
+    SYNTAX       DecimalOne
+    UNITS        "dB"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "The average Signal to Noise Ratio (SNR) amongst all of the satellites
+         detected by the Mimosa device. Display is in 1 decimal point."
+    ::= { mimosaLocInfo 4 }
+
+mimosaSatelliteStrength OBJECT-TYPE
+    SYNTAX  INTEGER {
+                good(1),
+                bad(2)
+            }
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "Strength of the satellites based on the number of satellites available.
+         It is considered good if more than 2 satellites are available."
+    ::= { mimosaLocInfo 5 }
+
+mimosaGPSSatellites OBJECT-TYPE
+    SYNTAX       Integer32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "Total number of GPS satellites detected."
+    ::= { mimosaLocInfo 6 }
+
+mimosaGlonassSatellites OBJECT-TYPE
+    SYNTAX       Integer32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "Total number of GLONASS satellites detected."
+    ::= { mimosaLocInfo 7 }
+
+mimosaClockAccuracy OBJECT-TYPE
+    SYNTAX       DecimalTwo
+    UNITS        "PPB"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "Timing signal accuracy measured in parts per billion (PPB) by the
+         Mimosa device. Display is in 2 decimal points."
+    ::= { mimosaLocInfo 8 }
+
+
+-- **********************************************************************
+-- ***  Mimosa Device TDMA Information variables are specified below. ***
+-- **********************************************************************
+
+mimosaWirelessMode OBJECT-TYPE
+    SYNTAX  INTEGER {
+                accessPoint(1),
+                station(2)
+            }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Describes wherger the Mimosa device acts as an access point or station."
+    ::= { mimosaTdmaInfo 1 }
+
+mimosaWirelessProtocol OBJECT-TYPE
+    SYNTAX  INTEGER {
+                tdma(1),
+                csma(2)
+            }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Describes the wireless protocol configured on the Mimosa device. 
+	     Both TDMA and CSMA are supported. TDMA is a deterministic protocol
+         where each device is assigned a time slot during which it is allowed
+         to transmit. This allows for collocated radios to utilize the same
+         channel and avoid Tx/Rx collisions and interference."
+    ::= { mimosaTdmaInfo 2 }
+
+mimosaTDMAMode OBJECT-TYPE
+    SYNTAX  INTEGER {
+                a(1),
+                b(2)
+            }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Specifies the TDMA Gender of the radio (A or B)."
+    ::= { mimosaTdmaInfo 3 }
+
+mimosaTDMAWindow OBJECT-TYPE
+    SYNTAX      Integer32
+    UNITS       "ms"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Specifies the length of the transmit time slot in milliseconds."
+    ::= { mimosaTdmaInfo 4 }
+
+mimosaTrafficSplit OBJECT-TYPE
+    SYNTAX  INTEGER {
+                symmetric(1),
+                asymmetric(2),
+                auto(3)
+            }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The radio can be configured to allocate bandwidth symmetrically (50/50)
+         or asymmetrically (75/25 or 25/75) in environments where traffic
+         direction is expected to be heavier in one direction than the other.
+         With an asymmetrical split, the local radio is represented first in the
+         slash notation, (local/remote). For example, in the (75/25) split, the
+         local radio gets 75, while the remote radio gets 25. If Auto is selected
+         the radio will automatically determine, based upon traffic flow, which
+         ratio will be used. The radio will continue to evaluate the flow and
+         adjust accordingly."
+    ::= { mimosaTdmaInfo 5 }
+
+
+-- **********************************************************************
+-- *** Mimosa Device Radio Information variables are specified below. ***
+-- **********************************************************************
+
+mimosaChainTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MimosaChainEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A list of RF chain entries, which is part of MIMO tables. MIMO stands
+         for Multiple In Multiple Out."
+    ::= { mimosaRfInfo 1 }
+
+mimosaChainEntry OBJECT-TYPE
+    SYNTAX      MimosaChainEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry containing chain information applicable to a particular
+         RF chain."
+    INDEX   { mimosaChain }
+    ::= { mimosaChainTable 1 }
+
+MimosaChainEntry ::=
+    SEQUENCE {
+        mimosaChain        Integer32,
+        mimosaTxPower      DecimalOne,
+        mimosaRxPower      DecimalOne,
+        mimosaRxNoise      DecimalOne,
+        mimosaSNR          DecimalOne,
+        mimosaCenterFreq   Integer32,
+        mimosaPolarization INTEGER
+    }
+
+mimosaChain OBJECT-TYPE
+    SYNTAX      Integer32 (0..65535)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An index which is used to access a particular entry in the chain table."
+    ::= { mimosaChainEntry 1 }
+
+mimosaTxPower OBJECT-TYPE
+    SYNTAX      DecimalOne
+    UNITS       "dBm"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Specifies the transmit power of the given RF chain. A value of -8 means
+         this particular TxChain is not a valid entry."
+    ::= { mimosaChainEntry 2 }
+
+mimosaRxPower OBJECT-TYPE
+    SYNTAX      DecimalOne
+    UNITS       "dBm"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Specifies the receive power of the given RF chain. A value of -100
+         means this particular RxChain is not a valid entry (SNR must be -100)."
+    ::= { mimosaChainEntry 3 }
+
+mimosaRxNoise OBJECT-TYPE
+    SYNTAX      DecimalOne
+    UNITS       "dBm"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Specifies the received noise level for the given RF chain."
+    ::= { mimosaChainEntry 4 }
+
+mimosaSNR OBJECT-TYPE
+    SYNTAX      DecimalOne
+    UNITS       "dB"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Indicates the Signal to Noise Ratio (SNR) for the given RF chain.
+         A value of -100 means this particular RxChain is not a valid entry."
+    ::= { mimosaChainEntry 5 }
+
+mimosaCenterFreq OBJECT-TYPE
+    SYNTAX      Integer32
+    UNITS       "MHz"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The center frequency for the given RF chain. A value of 0 means this
+         particular Chain is not a valid entry."
+    ::= { mimosaChainEntry 6 }
+
+mimosaPolarization OBJECT-TYPE
+    SYNTAX  INTEGER {
+                horizontal(1),
+                vertical(2)
+            }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The ploarization of the given RF chain. It could be horizontal or
+         vertical."
+    ::= { mimosaChainEntry 7 }
+
+
+mimosaStreamTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MimosaStreamEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A list of data stream entries, which are part of MIMO tables. MIMO
+         stands for Multiple In Multiple Out."
+    ::= { mimosaRfInfo 2 }
+
+mimosaStreamEntry OBJECT-TYPE
+    SYNTAX      MimosaStreamEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The entry containing information applicable to a particular stream."
+    INDEX   { mimosaStream }
+    ::= { mimosaStreamTable 1 }
+
+MimosaStreamEntry ::=
+    SEQUENCE {
+        mimosaStream       Integer32,
+        mimosaTxPhy        Integer32,
+        mimosaTxMCS        Integer32,
+        mimosaTxWidth      Integer32,
+	mimosaRxPhy        Integer32,
+        mimosaRxMCS        Integer32,
+        mimosaRxWidth      Integer32,
+	mimosaRxEVM        DecimalOne
+   }
+
+mimosaStream OBJECT-TYPE
+    SYNTAX      Integer32 (0..65535)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The index used to access a particular entry in the stream table."
+    ::= { mimosaStreamEntry 1 }
+
+mimosaTxPhy OBJECT-TYPE
+    SYNTAX      Integer32
+    UNITS       "Mbps"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Specifies the transmit rate of the given data stream."
+    ::= { mimosaStreamEntry 2 }
+
+mimosaTxMCS OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Specifies the transmit MCS of the given data stream. A value of
+         -1 means this particular TxStream is not a valid entry."
+    ::= { mimosaStreamEntry 3 }
+
+mimosaTxWidth OBJECT-TYPE
+    SYNTAX      Integer32
+    UNITS       "MHz"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Specifies the channel width based on MCS. A value of 
+	 -1 means this particular TxWidth is not a valid entry"
+    ::= { mimosaStreamEntry 4 }
+
+mimosaRxPhy OBJECT-TYPE
+    SYNTAX      Integer32
+    UNITS       "Mbps"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Specifies the receive rate of the given data stream."
+    ::= { mimosaStreamEntry 5 }
+
+mimosaRxMCS OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Specifies the receive MCS of the given data stream. A value of
+         -1 means this particular RxStream is not a valid entry."
+    ::= { mimosaStreamEntry 6 }
+
+mimosaRxWidth OBJECT-TYPE
+    SYNTAX      Integer32
+    UNITS	"MHz"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Specifies the receive Rx Width of the given data stream. A value of
+         -1 means this particular RxWidth is not a valid entry."
+    ::= { mimosaStreamEntry 7 }
+
+mimosaRxEVM OBJECT-TYPE
+    SYNTAX      DecimalOne
+    UNITS       "dB"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Specifies the receive Error Vector Magnitude (EVM) of the given data
+         stream."
+    ::= { mimosaStreamEntry 8 }
+
+mimosaChannelTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MimosaChannelEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "A list of RF channel entries on the Mimosa device."
+    ::= { mimosaRfInfo 3 }
+
+mimosaChannelEntry OBJECT-TYPE
+    SYNTAX      MimosaChannelEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The entry containing management information applicable to a particular
+         channel."
+    INDEX   { mimosaChannel }
+    ::= { mimosaChannelTable 1 }
+
+MimosaChannelEntry ::=
+    SEQUENCE {
+        mimosaChannel            Integer32,
+        mimosaChannelMode        INTEGER,
+        mimosaChannelWidth       Integer32,
+        mimosaChannelTxPower     DecimalOne,
+        mimosaChannelCenterFreq  Integer32
+    }
+
+mimosaChannel OBJECT-TYPE
+    SYNTAX      Integer32 (0..65535)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The index used to access a particular entry in the RF channel table."
+    ::= { mimosaChannelEntry 1 }
+
+mimosaChannelMode OBJECT-TYPE
+    SYNTAX  INTEGER {
+                transmit(1),
+                receive(2),
+                bidirectional(3)
+            }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+	"Specifies the mode for the given channel. The transmit or receive
+	 values indicate Frequency Diversity (FD) mode is in use. The
+	 bidirectional value means that the channel is used for both transmit
+	 and receive in all other single or dual channel modes."
+    ::= { mimosaChannelEntry 2 }
+
+mimosaChannelWidth OBJECT-TYPE
+    SYNTAX      Integer32
+    UNITS       "MHz"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Specifies the channel width of the given channel."
+    ::= { mimosaChannelEntry 3 }
+
+mimosaChannelTxPower OBJECT-TYPE
+    SYNTAX      Integer32
+    UNITS       "dBm"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Specifies the transmit power level on the channel. If Channel Width
+         is set to 1xN MHz, Channel 2 is not be used. In Frequency Diversity mode,
+         Power 1 and Power 2 represent transmit power on the local and remote
+         sides, respectively."
+    ::= { mimosaChannelEntry 4 }
+
+mimosaChannelCenterFreq OBJECT-TYPE
+    SYNTAX      Integer32
+    UNITS       "MHz"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Specifies the center frequency of the channel used on the link. In all
+         modes, the center frequency represents the absolute center of the
+         selected channel width without any offset, and the center can be moved
+         in 5 MHz increments.
+
+         A value of 0 means this particular channel is not a valid entry."
+    ::= { mimosaChannelEntry 5 }
+
+mimosaAntennaGain OBJECT-TYPE
+    SYNTAX       Integer32
+    UNITS        "dBi"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "The antenna gain on the Mimosa device."
+    ::= { mimosaRfInfo 4 }
+
+mimosaTotalTxPower OBJECT-TYPE
+    SYNTAX      DecimalOne
+    UNITS        "dBm"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "The total transmit power for all the channels on the Mimosa device."
+    ::= { mimosaRfInfo 5 }
+
+mimosaTotalRxPower OBJECT-TYPE
+    SYNTAX      DecimalOne
+    UNITS        "dBm"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "The total receive power for all the channels on the Mimosa device."
+    ::= { mimosaRfInfo 6 }
+
+mimosaTargetSignalStrength OBJECT-TYPE
+    SYNTAX      Integer32
+    UNITS        "dB"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "The calculated target receive signal strength based on device coordinates and settings."
+    ::= { mimosaRfInfo 7 }
+
+
+-- **********************************************************************
+-- ***  Mimosa Device WAN Information variables are specified below.  ***
+-- **********************************************************************
+
+mimosaWanSsid OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE (0..64))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The wireless link name used by both radios. Both AP and Station must
+         use the same SSID to communicate with each other."
+    ::= { mimosaWanInfo 1 }
+
+mimosaWanMac OBJECT-TYPE
+    SYNTAX      PhysAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The MAC address used for the wireless link."
+    ::= { mimosaWanInfo 2 }
+
+mimosaWanStatus OBJECT-TYPE
+    SYNTAX  INTEGER {
+                connected(1),
+                disconnected(2)
+            }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The wireless link status between the Mimosa devices."
+    ::= { mimosaWanInfo 3 }
+
+mimosaWanUpTime OBJECT-TYPE
+    SYNTAX      TimeTicks
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The wireless link up time since last reboot."
+    ::= { mimosaWanInfo 4 }
+
+
+-- ****************************************************************************
+-- *** Mimosa Device Performance Information variables are specified below. ***
+-- ****************************************************************************
+
+mimosaPhyTxRate OBJECT-TYPE
+    SYNTAX      DecimalTwo
+    UNITS       "kbps" 
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The transmit packet rate at the physical level over a 5 second interval."
+    ::= { mimosaPerfInfo 1 }
+
+mimosaPhyRxRate OBJECT-TYPE
+    SYNTAX      DecimalTwo
+    UNITS       "kbps" 
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The receive packet rate at the physical level over a 5 second interval."
+    ::= { mimosaPerfInfo 2 }
+
+mimosaPerTxRate OBJECT-TYPE
+    SYNTAX      DecimalTwo
+    UNITS       "%"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The trasnmit Packet Error Rate (PER) over a 5 second interval. It is
+         caluculated as packets with errors versuss packets without errors."
+    ::= { mimosaPerfInfo 3 }
+
+mimosaPerRxRate OBJECT-TYPE
+    SYNTAX      DecimalTwo
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The receive Packet Error Rate (PER) over a 5 second interval. It is
+         caluculated as packets with errors versuss packets without errors."
+    ::= { mimosaPerfInfo 4 }
+
+
+-- ****************************************************************************
+-- *** Mimosa Device Management  Information variables are specified below. ***
+-- ****************************************************************************
+
+mimosaNetworkMode OBJECT-TYPE
+    SYNTAX  INTEGER {
+                enabled(1),
+                disabled(2),
+                auto(3)
+            }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Specifies the mode for the local 2.4 GHz wireless network operation.
+         If Auto is selected, the 2.4 GHz management network is turned on for a
+         limited time (defined in Console Timeout ) after boot and then turned
+         off if there is no activity. If a user associates with the radio within
+         the timeout period, they will not be disconnected."
+    ::= { mimosaMgmtInfo 1 }
+
+mimosaRecoverySsid OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE (0..32))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The recovery SSID that allows the device to be reset to factory
+         defaults. This is available for 10 minutes after device boot. Disabling
+         the 2.4 GHz management network will not impact availability of this
+         option. The serial number of the device must be known in order to
+         perform the factory reset."
+    ::= { mimosaMgmtInfo 2 }
+
+mimosaLocalSsid OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE (0..32))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The SSID for managing the local 2.4 GHz wireless interface."
+    ::= { mimosaMgmtInfo 3 }
+
+mimosaLocalChannel OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+	"The channel used for the local 2.4 GHz wireless interface."
+    ::= { mimosaMgmtInfo 4 }
+
+mimosaConsoleTimeout OBJECT-TYPE
+    SYNTAX      Integer32
+    UNITS       "min"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+	"The amount inactivity on the 2.4 GHz wireless interface before
+         turning it off in Auto mode."
+    ::= { mimosaMgmtInfo 5 }
+
+mimosaMaxClients OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+	"The maximum number of wireless clients that can simultaneously access
+         the 2.4 GHz management interface."
+    ::= { mimosaMgmtInfo 6 }
+
+mimosaLocalMac OBJECT-TYPE
+    SYNTAX      PhysAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The MAC address used for 2.4 GHz wireless link."
+    ::= { mimosaMgmtInfo 7 }
+
+mimosaLocalIpAddr OBJECT-TYPE
+    SYNTAX      IpAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The IP address assigned to the 2.4 GHz wireless link."
+    ::= { mimosaMgmtInfo 8 }
+
+mimosaLocalNetMask OBJECT-TYPE
+    SYNTAX      IpAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The IP netmask assigned to the 2.4 GHz wireless link."
+    ::= { mimosaMgmtInfo 9 }
+
+mimosaLocalGateway OBJECT-TYPE
+    SYNTAX      IpAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The IP address of the gateway for the 2.4 GHz wireless link."
+    ::= { mimosaMgmtInfo 10 }
+
+mimosaFlowControl OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    enabled(1),
+                    disabled(2)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Specifies whether Flow Control is enabled on the Mimosa device."
+    ::= { mimosaMgmtInfo 11 }
+ 
+
+
+-- *************************************************************************
+-- *** Mimosa Device Services Information variables are specified below. ***
+-- *************************************************************************
+
+mimosaHttpsEnabled OBJECT-TYPE
+    SYNTAX  INTEGER {
+                enabled(1),
+                disabled(2)
+            }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Specifies whether HTTPS is enabled on the Mimosa device."
+    ::= { mimosaServices 1 }
+
+mimosaMgmtVlanEnabled OBJECT-TYPE
+    SYNTAX  INTEGER {
+                enabled(1),
+                disabled(2)
+            }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Specifies whether the Management VLAN is enabled on the Mimosa device."
+    ::= { mimosaServices 2 }
+
+mimosaMgmtCloudEnabled OBJECT-TYPE
+    SYNTAX  INTEGER {
+                enabled(1),
+                disabled(2)
+            }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Specifies whether the Management Cloud is enabled on the Mimosa device."
+    ::= { mimosaServices 3 }
+
+mimosaRestMgmtEnabled OBJECT-TYPE
+    SYNTAX  INTEGER {
+                enabled(1),
+                disabled(2)
+            }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Specifies whether the REST management is enabled on the Mimosa device."
+    ::= { mimosaServices 4 }
+
+mimosaPingWatchdogEnabled OBJECT-TYPE
+    SYNTAX  INTEGER {
+                enabled(1),
+                disabled(2)
+            }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Specifies whether the IP Ping watchdog is enabled on the Mimosa device.
+         This is used to reset the device if a configured IP address is
+         not reached in certain number of retries."
+    ::= { mimosaServices 5 }
+
+mimosaSyslogEnabled OBJECT-TYPE
+    SYNTAX  INTEGER {
+                enabled(1),
+                disabled(2)
+            }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Specifies whether the Syslog client is enabled on the Mimosa device.
+         Syslog client sends the log messages to configured syslog server."
+    ::= { mimosaServices 6 }
+
+mimosaNtpMode OBJECT-TYPE
+    SYNTAX  INTEGER {
+                custom(1),
+                standard(2)
+            }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Specifies whether the NTP client is configured to use standard servers
+         from NIST, NTP organizations or custom NTP server."
+    ::= { mimosaServices 7 }
+
+mimosaNtpServer OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE (0..64))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Specifies the name or address of the custom NTP server."
+    ::= { mimosaServices 8 }
+
+END
diff --git a/MIBS/mimosa/MIMOSA-NETWORKS-PTMP-MIB b/MIBS/mimosa/MIMOSA-NETWORKS-PTMP-MIB
new file mode 100644
index 0000000..07f1937
--- /dev/null
+++ b/MIBS/mimosa/MIMOSA-NETWORKS-PTMP-MIB
@@ -0,0 +1,1036 @@
+MIMOSA-NETWORKS-PTMP-MIB DEFINITIONS ::= BEGIN
+
+--  Copyright (C) 2017, Mimosa Networks, Inc. All Rights Reserved.
+--
+--  Mimosa Networks MIB
+--  Revision: 0.3
+--  Date: April 05, 2017
+--
+--  Mimosa Networks, Inc.
+--  469 El Camino Real, Suite 100
+--  Santa Clara, CA 95050
+--  support@mimosa.co
+--
+--  This MIB defines the MIB specification for Mimosa Network's Products
+--
+--  Mimosa reserves the right to make changes to this MIB specification as
+--  well as other information related to this specification without prior
+--  notice.  The user of this specification should consult Mimosa Networks,
+--  to determine if any such changes have been made.
+--
+--  Current MIBs are available from Mimosa Networks at the following URLs:
+--
+--      http://help.mimosa.co
+--
+--  In no event shall Mimosa Networks, Inc. be liable for any indirect,
+--  consequential, special or incidental damages whatsoever (including
+--  but not limited to lost profits or lost revenue) arising out of or
+--  related to this specification or the information contained in it.
+--  This non-liability extends to even if Mimosa Networks Inc. has been
+--  advised of, known, or should have known, the potential for such damages.
+
+--  Mimosa Networks, Inc. hereby grants end-users, and other parties a
+--  a non-exclusive license to use this MIB specification in order to
+--  manage products of Mimosa Networks, Inc.
+
+
+IMPORTS
+    OBJECT-TYPE, MODULE-IDENTITY,
+    IpAddress, Integer32, Counter64,
+    Unsigned32                              FROM SNMPv2-SMI
+
+    DisplayString, TruthValue,
+    MacAddress, TimeStamp                   FROM SNMPv2-TC
+
+    MODULE-COMPLIANCE, OBJECT-GROUP         FROM SNMPv2-CONF
+
+    DecimalOne, DecimalTwo,
+    Mimosa5GHzFrequency,
+    Mimosa5GHzChannelNumber                 FROM MIMOSA-MIB-TC
+
+    mimosaWireless, mimosaConformanceGroup  FROM MIMOSA-NETWORKS-BASE-MIB;
+
+
+-- *****************************************************************
+-- ***       Mimosa PTMP variables are specified below.          ***
+-- *****************************************************************
+
+mimosaPtmp  MODULE-IDENTITY
+    LAST-UPDATED    "201704050000Z"
+    ORGANIZATION    "Mimosa Networks"
+    CONTACT-INFO
+        "
+            Postal: Mimosa Networks, Inc.
+                    469 El Camino Real, Suite 100
+                    Santa Clara, CA 95050
+                    US
+
+               Tel: +1-408-628-1277
+
+            E-mail: inquiry@mimosa.co
+        "
+    DESCRIPTION
+        "The MIB module for Mimosa PTMP products"
+    REVISION        "201704050000Z"
+    DESCRIPTION
+            "The first version of this MIB"
+    ::= { mimosaWireless 9 }
+
+mimosaPtmpSsid          OBJECT IDENTIFIER ::= { mimosaPtmp 1 }
+mimosaPtmpLinkInfo      OBJECT IDENTIFIER ::= { mimosaPtmp 2 }
+mimosaPtmpChannelPower  OBJECT IDENTIFIER ::= { mimosaPtmp 3 }
+mimosaPtmpApStats       OBJECT IDENTIFIER ::= { mimosaPtmp 4 }
+mimosaPtmpClientInfo    OBJECT IDENTIFIER ::= { mimosaPtmp 5 }
+mimosaPtmpClientStats   OBJECT IDENTIFIER ::= { mimosaPtmp 6 }
+mimosaPtmpMgmtInfo      OBJECT IDENTIFIER ::= { mimosaPtmp 7 }
+
+
+-- *************************************************************************
+-- ***      Mimosa SSID Information variables are specified below.       ***
+-- *************************************************************************
+
+mimosaPtmpSsidTable                 OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MimosaPtmpSsidEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A list of A5 SSID entries"
+    ::= { mimosaPtmpSsid 1 }
+
+
+mimosaPtmpSsidEntry                 OBJECT-TYPE
+    SYNTAX      MimosaPtmpSsidEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Entry that describes each SSID and all its related configuration"
+    INDEX   { mimosaPtmpSsidIndex }
+    ::= { mimosaPtmpSsidTable 1 }
+
+MimosaPtmpSsidEntry ::=
+    SEQUENCE {
+        mimosaPtmpSsidIndex                 Integer32,
+        mimosaPtmpSsidName                  DisplayString,
+        mimosaPtmpSsidType                  INTEGER,
+        mimosaPtmpSsidEnabled               TruthValue,
+        mimosaPtmpSsidBroadcastEnabled      TruthValue,
+        mimosaPtmpSsidIsolationEnabled      TruthValue
+   }
+
+mimosaPtmpSsidIndex                 OBJECT-TYPE
+    SYNTAX      Integer32(1..24)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Describes the index used to access a particular entry in the SSID
+        table."
+    ::= { mimosaPtmpSsidEntry 1 }
+
+mimosaPtmpSsidName                  OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE (1..32))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Describes the name of the SSID"
+    ::= { mimosaPtmpSsidEntry 2 }
+
+mimosaPtmpSsidType                  OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    hotspot(0),
+                    cpe(1)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Describes the type of clients that will connect to this SSID. CPE
+         represents fixed, or Hotspot represents mobile devices"
+    ::= { mimosaPtmpSsidEntry 3 }
+
+mimosaPtmpSsidEnabled               OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Describes if the SSID is enabled (True) or disabled (False)"
+    ::= { mimosaPtmpSsidEntry 4 }
+
+mimosaPtmpSsidBroadcastEnabled      OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Describes if the Broadcast feature for this SSID is enabled or 
+        disabled"
+    ::= { mimosaPtmpSsidEntry 5 }
+
+mimosaPtmpSsidIsolationEnabled      OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Describes if the client isolation is enabled or disabled"
+    ::= { mimosaPtmpSsidEntry 6 }
+
+
+-- *************************************************************************
+-- *** Mimosa PTMP Link Information variables are specified below.       ***
+-- *************************************************************************
+
+mimosaPtmpWirelessMode              OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    srs (1),
+                    wifiinterop (2)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Describes the wireless protocol configured on the Mimosa Device"
+    ::= { mimosaPtmpLinkInfo 1 }
+
+mimosaPtmpWirelessGender            OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    a (1),
+                    b (2)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Describes the wireless protocol gender that defines the transmit
+         and receive timing"
+    ::= { mimosaPtmpLinkInfo 2 }
+
+mimosaPtmpWirelessTrafficSplit      OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Describes how the bandwidth is split between the AP and Station"
+    ::= { mimosaPtmpLinkInfo 3 }
+
+mimosaPtmpWirelessWindowLength      OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Describes the length of the transmit time slot in milliseconds"
+    ::= { mimosaPtmpLinkInfo 4 }
+
+-- *************************************************************************
+-- *** Mimosa Radio Channel Power Information variables are specified  . ***
+-- *************************************************************************
+
+mimosaPtmpAutoChannelEnabled        OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Describes if the Auto Channel feature is Enabled or Disabled. This
+         function selects the channel that results in the best RF
+         performance."
+    ::= { mimosaPtmpChannelPower 1 }
+
+mimosaPtmpAntennaGain               OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Describes the antenna gain for connectorized version of the device.
+        Measured in dBi."
+    ::= { mimosaPtmpChannelPower 2 }
+
+mimosaPtmpChannelPowerTable         OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MimosaPtmpChannelPowerEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A list of Channel and Power related information per radio."
+    ::= { mimosaPtmpChannelPower 3 }
+
+mimosaPtmpChannelPowerEntry         OBJECT-TYPE
+    SYNTAX      MimosaPtmpChannelPowerEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry containing channel and power information"
+    INDEX   { mimosaPtmpChPwrRadioIndex }
+    ::= { mimosaPtmpChannelPowerTable 1 }
+
+MimosaPtmpChannelPowerEntry ::=
+    SEQUENCE {
+        mimosaPtmpChPwrRadioIndex       Unsigned32,
+        mimosaPtmpChPwrRadioName        DisplayString,
+        mimosaPtmpChPwrCntrFreqCfg      Mimosa5GHzFrequency,
+        mimosaPtmpChPwrPrimChannelCfg   Mimosa5GHzChannelNumber,
+        mimosaPtmpChPwrChWidthCfg       Unsigned32,
+        mimosaPtmpChPwrTxPowerCfg       Integer32,
+        mimosaPtmpChPwrCntrFreqCur      Mimosa5GHzFrequency,
+        mimosaPtmpChPwrPrimChannelCur   Mimosa5GHzChannelNumber,
+        mimosaPtmpChPwrChWidthCur       Unsigned32,
+        mimosaPtmpChPwrTxPowerCur       Integer32,
+        mimosaPtmpChPwrAgcMode          INTEGER,
+        mimosaPtmpChPwrMinRxPower       Integer32
+    }
+
+mimosaPtmpChPwrRadioIndex           OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Describes the index of the radio."
+    ::= { mimosaPtmpChannelPowerEntry 1 }
+
+mimosaPtmpChPwrRadioName            OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE (1..32))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Describes the name of the radio."
+    ::= { mimosaPtmpChannelPowerEntry 2 }
+
+mimosaPtmpChPwrCntrFreqCfg          OBJECT-TYPE
+    SYNTAX      Mimosa5GHzFrequency
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Describes the configured center frequency of the channel used on the
+         access point. The center frequency represents the absolute center
+         of the selected channel width without any offset. Measured in MHz"
+    ::= { mimosaPtmpChannelPowerEntry 3 }
+
+mimosaPtmpChPwrPrimChannelCfg       OBJECT-TYPE
+    SYNTAX      Mimosa5GHzChannelNumber
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Describes the primary channel number that corresponds with the
+         operating frequency."
+    ::= { mimosaPtmpChannelPowerEntry 4 }
+
+mimosaPtmpChPwrChWidthCfg           OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Describes the channel width for access point operation: 20 MHz,
+         40 MHz or 80 MHz"
+    ::= { mimosaPtmpChannelPowerEntry 5 }
+
+mimosaPtmpChPwrTxPowerCfg           OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Describes the desired transmit power level. The allowed options
+         are determined by a combination of country and chosen frequency.
+         Measured in dBm"
+    ::= { mimosaPtmpChannelPowerEntry 6 }
+
+mimosaPtmpChPwrCntrFreqCur          OBJECT-TYPE
+    SYNTAX      Mimosa5GHzFrequency
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Describes the current center frequency of the channel used on the
+         access point. The center frequency represents the absolute center
+         of the selected channel width without any offset. Measured in MHz"
+    ::= { mimosaPtmpChannelPowerEntry 7 }
+
+mimosaPtmpChPwrPrimChannelCur       OBJECT-TYPE
+    SYNTAX      Mimosa5GHzChannelNumber
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Describes the current primary channel number that corresponds with the
+         operating frequency."
+    ::= { mimosaPtmpChannelPowerEntry 8 }
+
+mimosaPtmpChPwrChWidthCur           OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Describes the current channel width for access point operation: 20 MHz,
+         40 MHz or 80 MHz"
+    ::= { mimosaPtmpChannelPowerEntry 9 }
+
+mimosaPtmpChPwrTxPowerCur           OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Describes the current transmit power level. The allowed options
+         are determined by a combination of country and chosen frequency.
+         Measured in dBm"
+    ::= { mimosaPtmpChannelPowerEntry 10 }
+
+mimosaPtmpChPwrAgcMode              OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    off (0),
+                    manual (1)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Describes the setting for Automatic Gain Control (AGC) feature,
+        which is used to set the signal level below which the radio
+        ignores incoming RF interference. The choices are Off or Manual"
+    ::= { mimosaPtmpChannelPowerEntry 11 }
+
+mimosaPtmpChPwrMinRxPower           OBJECT-TYPE
+    SYNTAX      Integer32 (-90..-10)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Describes the Rx power level (in manual AGC Mode) below your
+        expected signal, but above other interference, measured in dBm"
+    ::= { mimosaPtmpChannelPowerEntry 12 }
+
+mimosaPtmpChannelExclusionTable     OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MimosaPtmpChannelExclusionEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A list of Exclusions and Restrictions"
+    ::= { mimosaPtmpChannelPower 4 }
+
+mimosaPtmpChannelExclusionEntry     OBJECT-TYPE
+    SYNTAX      MimosaPtmpChannelExclusionEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Entry that describes each SSID and all its related configuration"
+    INDEX   { mimosaPtmpChannelExclusionIndex }
+    ::= { mimosaPtmpChannelExclusionTable 1 }
+
+MimosaPtmpChannelExclusionEntry ::=
+    SEQUENCE {
+        mimosaPtmpChannelExclusionIndex     Integer32,
+        mimosaPtmpChannelExclusionStart     Integer32,
+        mimosaPtmpChannelExclusionEnd       Integer32
+   }
+
+mimosaPtmpChannelExclusionIndex     OBJECT-TYPE
+    SYNTAX      Integer32 (1..16)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Describes the index used to access a particular entry in the
+        Exclusion list table."
+    ::= { mimosaPtmpChannelExclusionEntry 1 }
+
+mimosaPtmpChannelExclusionStart     OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Describes the lower limit for the exclusion range, not including
+        this frequency"
+    ::= { mimosaPtmpChannelExclusionEntry 2 }
+
+mimosaPtmpChannelExclusionEnd       OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Describes the upper limit for the exclusion range, not including
+         this frequency."
+    ::= { mimosaPtmpChannelExclusionEntry 3 }
+
+
+-- *************************************************************************
+-- *** Mimosa Access Point Statistics                                    ***
+-- *************************************************************************
+mimosaPtmpApStatsRxBytes            OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Describes the number of bytes received by the AP in single-User mode"
+        ::= { mimosaPtmpApStats 1 }
+
+mimosaPtmpApStatsTxBytes            OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Describes the number of bytes transmitted by the AP in single-user
+        mode"
+        ::= { mimosaPtmpApStats 2 }
+
+mimosaPtmpApStatsRxPkts             OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Describes the number of packets received by the AP in single-user mode"
+        ::= { mimosaPtmpApStats 3 }
+
+mimosaPtmpApStatsTxPkts             OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Describes the number of packets transmitted by the AP in
+        single-user mode"
+        ::= { mimosaPtmpApStats 4 }
+
+mimosaPtmpApStatsTxPer              OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Describes the packet error rate on the transmit path of the
+        AP, in single-user mode"
+        ::= { mimosaPtmpApStats 5 }
+
+mimosaPtmpApStatsLastUpdated        OBJECT-TYPE
+    SYNTAX      TimeStamp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Describes the last updated time for these statistics"
+        ::= { mimosaPtmpApStats 6 }
+
+
+-- *************************************************************************
+-- *** Mimosa Access Point Client Information                            ***
+-- *************************************************************************
+
+mimosaPtmpClientInfoTable           OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MimosaPtmpClientInfoEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A list of all the associated clients and related information of
+        each of them."
+    ::= { mimosaPtmpClientInfo 1 }
+
+mimosaPtmpClientInfoEntry           OBJECT-TYPE
+    SYNTAX      MimosaPtmpClientInfoEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Entry that describes each client and related configuration and
+        statistics."
+    INDEX   { mimosaPtmpClientInfoIndex }
+    ::= { mimosaPtmpClientInfoTable 1 }
+
+MimosaPtmpClientInfoEntry ::=
+    SEQUENCE { mimosaPtmpClientInfoIndex        Unsigned32,
+               mimosaPtmpClientInfoMacAddress   MacAddress,
+               mimosaPtmpClientName             DisplayString,
+               mimosaPtmpClientFWVersion        DisplayString,
+               mimosaPtmpClientIPAddress        IpAddress,
+               mimosaPtmpClientAssociatedTime   TimeStamp,
+               mimosaPtmpClientPlanName         DisplayString,
+               mimosaPtmpClientUlCommitted      Unsigned32,
+               mimosaPtmpClientUlPeak           Unsigned32,
+               mimosaPtmpClientDlCommitted      Unsigned32,
+               mimosaPtmpClientDlPeak           Unsigned32,
+               mimosaPtmpClientInfoLastUpdated  TimeStamp }
+
+mimosaPtmpClientInfoIndex           OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Describes the index used to access a particular entry in the
+        Client Traffic Shaping Information table."
+    ::= { mimosaPtmpClientInfoEntry 1 }
+
+mimosaPtmpClientInfoMacAddress      OBJECT-TYPE
+    SYNTAX      MacAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Describes the MAC address of the client associated to this access-
+        point."
+    ::= { mimosaPtmpClientInfoEntry 2 }
+
+mimosaPtmpClientName                OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE (1..64))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Describes the name associated with this client."
+    ::= { mimosaPtmpClientInfoEntry 3 }
+
+mimosaPtmpClientFWVersion           OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE (1..64))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Describes the firmware version of this client.
+
+        This is supported only if the client is a Mimosa device."
+    ::= { mimosaPtmpClientInfoEntry 4 }
+
+mimosaPtmpClientIPAddress           OBJECT-TYPE
+    SYNTAX      IpAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Describes the IP Address associated with this client."
+    ::= { mimosaPtmpClientInfoEntry 5 }
+
+mimosaPtmpClientAssociatedTime      OBJECT-TYPE
+    SYNTAX      TimeStamp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Describes how long the client is associated with this access-point."
+    ::= { mimosaPtmpClientInfoEntry 6 }
+
+mimosaPtmpClientPlanName            OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Describes the Traffic Shaping plan associated with this client."
+    ::= { mimosaPtmpClientInfoEntry 7 }
+
+mimosaPtmpClientUlCommitted         OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Describes the Uplink Committed Rate configured for the client."
+    ::= { mimosaPtmpClientInfoEntry 8 }
+
+mimosaPtmpClientUlPeak              OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Describes the Uplink Peak Rate configured for the client."
+    ::= { mimosaPtmpClientInfoEntry 9 }
+
+mimosaPtmpClientDlCommitted         OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Describes the Downlink Committed Rate configured for the client."
+    ::= { mimosaPtmpClientInfoEntry 10 }
+
+mimosaPtmpClientDlPeak              OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Describes the Downlink Peak Rate configured for the client."
+    ::= { mimosaPtmpClientInfoEntry 11 }
+
+mimosaPtmpClientInfoLastUpdated     OBJECT-TYPE
+    SYNTAX      TimeStamp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Describes the last updated time of this information for the Client."
+    ::= { mimosaPtmpClientInfoEntry 12 }
+
+
+-- *************************************************************************
+-- *** Mimosa Access Point Client Statistics                             ***
+-- *************************************************************************
+
+mimosaPtmpClientStatsTable          OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MimosaPtmpClientStatsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A list of all the associated clients and related information of each
+         of them."
+
+    ::= { mimosaPtmpClientStats 1 }
+
+mimosaPtmpClientStatsEntry          OBJECT-TYPE
+    SYNTAX      MimosaPtmpClientStatsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Entry that describes each client all its related configuration and
+        statistics."
+    INDEX   { mimosaPtmpClientStatsIndex }
+    ::= { mimosaPtmpClientStatsTable 1 }
+
+MimosaPtmpClientStatsEntry ::=
+    SEQUENCE { mimosaPtmpClientStatsIndex           Unsigned32,
+               mimosaPtmpClientStatsMacAddress      MacAddress,
+               mimosaPtmpClientAssocBW              Unsigned32,
+               mimosaPtmpClientRxBytes              Counter64,
+               mimosaPtmpClientTxBytes              Counter64,
+               mimosaPtmpClientRxPkts               Counter64,
+               mimosaPtmpClientTxPkts               Counter64,
+               mimosaPtmpClientRxPhyRate            Unsigned32,
+               mimosaPtmpClientTxPhyRate            Unsigned32,
+               mimosaPtmpClientTxAvgPer             DecimalTwo,
+               mimosaPtmpClientRssiAvg              DecimalOne,
+               mimosaPtmpClientStatsLastUpdated     TimeStamp
+             }
+
+mimosaPtmpClientStatsIndex          OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Describes the index used to access a particular entry in the
+        Client Information table."
+    ::= { mimosaPtmpClientStatsEntry 1 }
+
+mimosaPtmpClientStatsMacAddress          OBJECT-TYPE
+    SYNTAX      MacAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Describes the MAC address of the client associated to this access-
+        point."
+    ::= { mimosaPtmpClientStatsEntry 2 }
+
+mimosaPtmpClientAssocBW             OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Describes the associated bandwidth of the client."
+    ::= { mimosaPtmpClientStatsEntry 3 }
+
+mimosaPtmpClientRxBytes             OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Describes the number of bytes received from this client."
+    ::= { mimosaPtmpClientStatsEntry 4 }
+
+mimosaPtmpClientTxBytes             OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Describes the number of bytes transmitted to this client."
+    ::= { mimosaPtmpClientStatsEntry 5 }
+
+mimosaPtmpClientRxPkts              OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Describes the number of packets received from this client."
+    ::= { mimosaPtmpClientStatsEntry 6 }
+
+mimosaPtmpClientTxPkts              OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Describes the number of packets transmitted to this client."
+    ::= { mimosaPtmpClientStatsEntry 7 }
+
+mimosaPtmpClientRxPhyRate           OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Describes the receive rate of this client."
+    ::= { mimosaPtmpClientStatsEntry 8 }
+
+mimosaPtmpClientTxPhyRate           OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Describes the transmit rate of this client."
+    ::= { mimosaPtmpClientStatsEntry 9 }
+
+mimosaPtmpClientTxAvgPer            OBJECT-TYPE
+    SYNTAX      DecimalTwo
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Describes the average packet error rate on the transmit side for
+        this client."
+    ::= { mimosaPtmpClientStatsEntry 10 }
+
+mimosaPtmpClientRssiAvg             OBJECT-TYPE
+    SYNTAX      DecimalOne
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Describes the average RSSI for this Client."
+    ::= { mimosaPtmpClientStatsEntry 11 }
+
+mimosaPtmpClientStatsLastUpdated         OBJECT-TYPE
+    SYNTAX      TimeStamp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Describes the last updated time of this information for the Client."
+    ::= { mimosaPtmpClientStatsEntry 12 }
+
+
+-- *************************************************************************
+-- *** Mimosa PTMP Management Information variables are specified below. ***
+-- *************************************************************************
+
+mimosaPtmpMgmtIpAddress             OBJECT-TYPE
+    SYNTAX      IpAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Describes the IP Address configured on the Mimosa Device"
+    ::= { mimosaPtmpMgmtInfo 1 }
+
+mimosaPtmpMgmtIpNetmask             OBJECT-TYPE
+    SYNTAX      IpAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Describes the IP netmask configured on the Mimosa Device"
+    ::= { mimosaPtmpMgmtInfo 2 }
+
+mimosaPtmpMgmtIpGateway             OBJECT-TYPE
+    SYNTAX      IpAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Describes the IP Address of the Gateway configured on the Mimosa
+        Device"
+    ::= { mimosaPtmpMgmtInfo 3 }
+
+mimosaPtmpMgmtIpMode                OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE (4..6))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Describes the IP Address assignment mode configured on the Mimosa
+        Device"
+    ::= { mimosaPtmpMgmtInfo 4 }
+
+mimosaPtmpMgmtPrimaryDNS            OBJECT-TYPE
+    SYNTAX      IpAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Describes the IP Address of the Primary DNS server configured on the
+        Mimosa Device"
+    ::= { mimosaPtmpMgmtInfo 5 }
+
+mimosaPtmpMgmtSecondaryDNS          OBJECT-TYPE
+    SYNTAX      IpAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Describes the IP Address of the Secondary DNS server configured on the
+        Mimosa Device"
+    ::= { mimosaPtmpMgmtInfo 6 }
+
+mimosaPtmpMgmtVlanStatus            OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    disable (0),
+                    enable (1)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Describes the status of management vlan configured on the Mimosa Device"
+    ::= { mimosaPtmpMgmtInfo 7 }
+
+mimosaPtmpMgmtVlanId                OBJECT-TYPE
+    SYNTAX      Integer32 
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Describes the management vlan-id configured on the Mimosa Device"
+    ::= { mimosaPtmpMgmtInfo 8 }
+
+mimosaPtmpMgmtVlanPassthrough       OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    disable (0),
+                    enable (1)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Describes the status of the vlan passthrough configured on the Mimosa Device"
+    ::= { mimosaPtmpMgmtInfo 9 }
+
+mimosaPtmpMgmtEthernetMac           OBJECT-TYPE
+    SYNTAX      MacAddress 
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Describes the Ethernet MAC address configured on the Mimosa Device"
+    ::= { mimosaPtmpMgmtInfo 10 }
+
+---
+---  Conformance/Compliance Statements
+---
+mimosaPtmpConformance         OBJECT IDENTIFIER ::= { mimosaConformanceGroup 2 }
+
+mimosaPtmpCompliances         OBJECT IDENTIFIER ::= { mimosaPtmpConformance 1 }
+mimosaPtmpGroups              OBJECT IDENTIFIER ::= { mimosaPtmpConformance 2 }
+
+
+mimosaPtmpCompliance      MODULE-COMPLIANCE
+    STATUS      current
+    DESCRIPTION
+        "The compliance statement for PTMP supported Access Points that
+        implement this MIB."
+    MODULE
+        GROUP mimosaPtmpSsidGroup
+        DESCRIPTION
+            "The mimosaPtmpSsidGroup is mandatory only for access-point device
+            supporting PTMP."
+
+        GROUP mimosaPtmpLinkInfoGroup
+        DESCRIPTION
+            "The mimosaPtmpLinkInfoGroup is mandatory only for access-point
+            device supporting PTMP."
+
+        GROUP mimosaPtmpChannelPowerGroup
+        DESCRIPTION
+            "The mimosaPtmpChannelPowerGroup is mandatory only for access-point
+            device supporting PTMP."
+
+        GROUP mimosaPtmpApStatsGroup
+        DESCRIPTION
+            "The mimosaPtmpApStatsGroup is mandatory only for access-point
+            device supporting PTMP."
+
+        GROUP mimosaPtmpClientStatsGroup
+        DESCRIPTION
+            "The mimosaPtmpClientStatsGroup is mandatory only for access-point
+            device supporting PTMP."
+
+        GROUP mimosaPtmpClientInfoGroup
+        DESCRIPTION
+            "The mimosaPtmpClientInfoGroup is mandatory only for access-point
+            device supporting PTMP."
+
+        GROUP mimosaPtmpMgmtInfoGroup
+        DESCRIPTION
+            "The mimosaPtmpMgmtInfoGroup is mandatory only for access-point
+            device supporting PTMP."
+    ::= { mimosaPtmpCompliances 1 }
+
+
+mimosaPtmpSsidGroup                 OBJECT-GROUP
+    OBJECTS {
+            mimosaPtmpSsidName,
+            mimosaPtmpSsidType,
+            mimosaPtmpSsidEnabled,
+            mimosaPtmpSsidBroadcastEnabled,
+            mimosaPtmpSsidIsolationEnabled
+    }
+    STATUS      current
+    DESCRIPTION
+        "A collection of objects for the SSID Table."
+    ::= { mimosaPtmpGroups 1 }
+
+mimosaPtmpLinkInfoGroup             OBJECT-GROUP
+    OBJECTS {
+            mimosaPtmpWirelessMode,
+            mimosaPtmpWirelessGender,
+            mimosaPtmpWirelessTrafficSplit,
+            mimosaPtmpWirelessWindowLength
+    }
+    STATUS      current
+    DESCRIPTION
+        "A collection of objects for the wireless link objects."
+    ::= { mimosaPtmpGroups 2 }
+
+mimosaPtmpChannelPowerGroup         OBJECT-GROUP
+    OBJECTS {
+            mimosaPtmpAutoChannelEnabled,
+            mimosaPtmpAntennaGain,
+            mimosaPtmpChPwrRadioName,
+            mimosaPtmpChPwrCntrFreqCfg,
+            mimosaPtmpChPwrPrimChannelCfg,
+            mimosaPtmpChPwrChWidthCfg,
+            mimosaPtmpChPwrTxPowerCfg,
+            mimosaPtmpChPwrCntrFreqCur,
+            mimosaPtmpChPwrPrimChannelCur,
+            mimosaPtmpChPwrChWidthCur,
+            mimosaPtmpChPwrTxPowerCur,
+            mimosaPtmpChPwrAgcMode,
+            mimosaPtmpChPwrMinRxPower,
+            mimosaPtmpChannelExclusionStart,
+            mimosaPtmpChannelExclusionEnd
+    }
+    STATUS      current
+    DESCRIPTION
+        "A collection of objects for the wireless channel and power settings."
+    ::= { mimosaPtmpGroups 3 }
+
+mimosaPtmpApStatsGroup              OBJECT-GROUP
+    OBJECTS {
+            mimosaPtmpApStatsRxBytes,
+            mimosaPtmpApStatsTxBytes,
+            mimosaPtmpApStatsRxPkts,
+            mimosaPtmpApStatsTxPkts,
+            mimosaPtmpApStatsTxPer,
+            mimosaPtmpApStatsLastUpdated
+    }
+    STATUS      current
+    DESCRIPTION
+        "A collection of objects describing the AP related statistics."
+    ::= { mimosaPtmpGroups 4 }
+
+mimosaPtmpClientInfoGroup           OBJECT-GROUP
+    OBJECTS {
+            mimosaPtmpClientName,
+            mimosaPtmpClientFWVersion,
+            mimosaPtmpClientIPAddress,
+            mimosaPtmpClientAssociatedTime,
+            mimosaPtmpClientPlanName,
+            mimosaPtmpClientUlCommitted,
+            mimosaPtmpClientUlPeak,
+            mimosaPtmpClientDlCommitted,
+            mimosaPtmpClientDlPeak,
+            mimosaPtmpClientInfoLastUpdated
+    }
+    STATUS      current
+    DESCRIPTION
+        "A collection of objects describing the client details."
+    ::= { mimosaPtmpGroups 5 }
+    
+mimosaPtmpClientStatsGroup          OBJECT-GROUP
+    OBJECTS {
+            mimosaPtmpClientStatsMacAddress,
+            mimosaPtmpClientAssocBW,
+            mimosaPtmpClientRxBytes,
+            mimosaPtmpClientRxPkts,
+            mimosaPtmpClientTxPkts,
+            mimosaPtmpClientRssiAvg,
+            mimosaPtmpClientRxPhyRate,
+            mimosaPtmpClientTxAvgPer,
+            mimosaPtmpClientTxPhyRate,
+            mimosaPtmpClientTxBytes,
+            mimosaPtmpClientStatsLastUpdated
+    }
+    STATUS      current
+    DESCRIPTION
+        "A collection of objects describing the client statistics."
+    ::= { mimosaPtmpGroups 6 }
+
+mimosaPtmpMgmtInfoGroup             OBJECT-GROUP
+    OBJECTS {
+            mimosaPtmpMgmtIpAddress,
+            mimosaPtmpMgmtIpNetmask,
+            mimosaPtmpMgmtIpGateway,
+            mimosaPtmpMgmtIpMode,
+            mimosaPtmpMgmtPrimaryDNS,
+            mimosaPtmpMgmtSecondaryDNS,
+            mimosaPtmpMgmtVlanStatus,
+            mimosaPtmpMgmtVlanId,
+            mimosaPtmpMgmtVlanPassthrough,
+            mimosaPtmpMgmtEthernetMac
+    }
+    STATUS      current
+    DESCRIPTION
+        "A collection of objects describing the client details."
+    ::= { mimosaPtmpGroups 7 }
+
+END
+