diff options
| author | David Leutgeb <david.leutgeb@mannundmouse.com> | 2023-12-05 12:25:34 +0100 |
|---|---|---|
| committer | David Leutgeb <david.leutgeb@mannundmouse.com> | 2023-12-05 12:25:34 +0100 |
| commit | 98a672123c7872f6b9b75a9a2b6bb3aea504de6a (patch) | |
| tree | 9b13bd7f563c3198047bd359195327cf28b3caf0 /MIBS/linksys/LINKSYS-BRIDGEMIBOBJECTS-MIB | |
| download | mibs-98a672123c7872f6b9b75a9a2b6bb3aea504de6a.tar.gz mibs-98a672123c7872f6b9b75a9a2b6bb3aea504de6a.zip | |
Diffstat (limited to 'MIBS/linksys/LINKSYS-BRIDGEMIBOBJECTS-MIB')
| -rw-r--r-- | MIBS/linksys/LINKSYS-BRIDGEMIBOBJECTS-MIB | 2041 |
1 files changed, 2041 insertions, 0 deletions
diff --git a/MIBS/linksys/LINKSYS-BRIDGEMIBOBJECTS-MIB b/MIBS/linksys/LINKSYS-BRIDGEMIBOBJECTS-MIB new file mode 100644 index 0000000..cc1258a --- /dev/null +++ b/MIBS/linksys/LINKSYS-BRIDGEMIBOBJECTS-MIB @@ -0,0 +1,2041 @@ +LINKSYS-BRIDGEMIBOBJECTS-MIB DEFINITIONS ::= BEGIN
+
+-- Title: LINKSYS ROS
+-- Private BRIDGE MIB OBJECTS MIB
+-- Version: 7.46
+-- Date: 15-Jan-2007
+
+IMPORTS
+ rnd FROM LINKSYS-MIB
+ OBJECT-TYPE, MODULE-IDENTITY, TimeTicks, Counter32 FROM SNMPv2-SMI
+ TruthValue, DisplayString, RowStatus FROM SNMPv2-TC
+ Counter FROM RFC1155-SMI
+ BridgeId, Timeout, dot1dBasePort,dot1dStpPort FROM BRIDGE-MIB
+ InterfaceIndex, ifIndex FROM IF-MIB
+ PortList FROM Q-BRIDGE-MIB
+ SnmpAdminString FROM SNMP-FRAMEWORK-MIB;
+
+-- -------------------------------------------------------------
+-- Textual Conventions
+-- -------------------------------------------------------------
+
+VlanList1 ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "Each octet within this value specifies a set of eight
+ vlans, with the first octet specifying vlan 1 through
+ 8, the second octet specifying vlan 9 through 16, etc.
+ Within each octet, the most significant bit represents
+ the lowest numbered vlan, and the least significant bit
+ represents the highest numbered vlan. Thus, each vlan
+ of the bridge is represented by a single bit within the
+ value of this object. If that bit has a value of '1'
+ then that vlan is included in the set of vlans; the vlan
+ is not included if its bit has a value of '0'.
+ VlanList1 represent vlans 1-1024"
+ SYNTAX OCTET STRING (SIZE(0..128))
+
+VlanList2 ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "As VlanList1 but represent vlans 1025-2048"
+ SYNTAX OCTET STRING (SIZE(0..128))
+
+VlanList3 ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "As VlanList1 but represent vlans 2049-3072"
+ SYNTAX OCTET STRING (SIZE(0..128))
+
+VlanList4 ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "As VlanList1 but represent vlans 3073-4094"
+ SYNTAX OCTET STRING (SIZE(0..128))
+
+
+
+rlpBridgeMIBObjects MODULE-IDENTITY
+ LAST-UPDATED "200701020000Z"
+ ORGANIZATION "
+ Linksys LLC."
+ CONTACT-INFO
+ "www.linksys.com/business/support"
+ DESCRIPTION
+ "This private MIB module defines bridge MIB objects private MIBs."
+ REVISION "200701020000Z"
+ DESCRIPTION
+ "Initial revision."
+ ::= { rnd 57 }
+
+rldot1dPriority OBJECT IDENTIFIER ::= { rlpBridgeMIBObjects 1 }
+
+rldot1dPriorityMibVersion OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "MIB's version, the current version is 1."
+ ::= { rldot1dPriority 1 }
+
+--
+-- rldot1dPriorityPortGroupTable
+--
+
+rldot1dPriorityPortGroupTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Rldot1dPriorityPortGroupEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of PortGroupNumber for each port."
+ ::= { rldot1dPriority 2 }
+
+rldot1dPriorityPortGroupEntry OBJECT-TYPE
+ SYNTAX Rldot1dPriorityPortGroupEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "All ports belonging to a same group have
+ the same User Priority to Traffic Class mapping."
+ INDEX { dot1dBasePort }
+ ::= { rldot1dPriorityPortGroupTable 1 }
+
+Rldot1dPriorityPortGroupEntry ::= SEQUENCE {
+ rldot1dPriorityPortGroupNumber INTEGER
+}
+
+rldot1dPriorityPortGroupNumber OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A group, that port belongs to. All ports belonging
+ to a same group have the same User Priority to
+ Traffic Class mapping."
+ ::= { rldot1dPriorityPortGroupEntry 1 }
+
+
+rldot1dStp OBJECT IDENTIFIER ::= { rlpBridgeMIBObjects 2 }
+
+--
+-- Scalars
+--
+rldot1dStpMibVersion OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "MIB's version, the current version is 2."
+ ::= { rldot1dStp 1 }
+
+rldot1dStpType OBJECT-TYPE
+ SYNTAX INTEGER {
+ perDevice (1),
+ mstp (4)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies whether the device supports Spanning Tree per device,
+ or per group."
+ ::= { rldot1dStp 2 }
+
+rldot1dStpEnable OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enable / Disable spanning tree. When working in per vlan mode
+ enable / disable STP per all vlans."
+ DEFVAL { true }
+ ::= { rldot1dStp 3 }
+
+rldot1dStpPortMustBelongToVlan OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Specifies whether a port must belong to a VLAN in order
+ to participate in the STP."
+ DEFVAL { true }
+ ::= { rldot1dStp 4 }
+
+rldot1dStpExtendedPortNumberFormat OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Specifies whether the STP uses the extended port fnumber format."
+ DEFVAL { false }
+ ::= { rldot1dStp 5 }
+
+--
+-- The Spanning Tree Vlan Table
+--
+rldot1dStpVlanTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Rldot1dStpVlanEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table that contains vlan-specific information
+ for the Spanning Tree Protocol."
+ ::= { rldot1dStp 6 }
+
+rldot1dStpVlanEntry OBJECT-TYPE
+ SYNTAX Rldot1dStpVlanEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of information maintained by every Vlan
+ about the Spanning Tree Protocol state for that
+ Vlan."
+ INDEX { rldot1dStpVlan }
+ ::= { rldot1dStpVlanTable 1 }
+
+Rldot1dStpVlanEntry ::= SEQUENCE {
+ rldot1dStpVlan INTEGER,
+ rldot1dStpVlanEnable TruthValue,
+ rldot1dStpTimeSinceTopologyChange TimeTicks,
+ rldot1dStpTopChanges Counter,
+ rldot1dStpDesignatedRoot BridgeId,
+ rldot1dStpRootCost INTEGER,
+ rldot1dStpRootPort INTEGER,
+ rldot1dStpMaxAge Timeout,
+ rldot1dStpHelloTime Timeout,
+ rldot1dStpHoldTime INTEGER,
+ rldot1dStpForwardDelay Timeout
+}
+
+rldot1dStpVlan OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Vlan index."
+ ::= { rldot1dStpVlanEntry 1 }
+
+rldot1dStpVlanEnable OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Specifies whether this vlan is STP enable or disable"
+ REFERENCE
+ " ?? "
+ DEFVAL { true }
+ ::= { rldot1dStpVlanEntry 2 }
+
+rldot1dStpTimeSinceTopologyChange OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The time (in hundredths of a second) since the
+ last time a topology change was detected by the
+ bridge entity."
+ REFERENCE
+ "IEEE 802.1D-1990: Section 6.8.1.1.3"
+ ::= { rldot1dStpVlanEntry 3 }
+
+rldot1dStpTopChanges OBJECT-TYPE
+ SYNTAX Counter
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of topology changes detected by
+ this bridge since the management entity was last
+ reset or initialized."
+ REFERENCE
+ "IEEE 802.1D-1990: Section 6.8.1.1.3"
+ ::= { rldot1dStpVlanEntry 4 }
+
+rldot1dStpDesignatedRoot OBJECT-TYPE
+ SYNTAX BridgeId
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The bridge identifier of the root of the spanning
+ tree as determined by the Spanning Tree Protocol
+ as executed by this node. This value is used as
+ the Root Identifier parameter in all Configuration
+ Bridge PDUs originated by this node."
+ REFERENCE
+ "IEEE 802.1D-1990: Section 4.5.3.1"
+ ::= { rldot1dStpVlanEntry 5 }
+
+rldot1dStpRootCost OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The cost of the path to the root as seen from
+ this bridge."
+ REFERENCE
+ "IEEE 802.1D-1990: Section 4.5.3.2"
+ ::= { rldot1dStpVlanEntry 6 }
+
+rldot1dStpRootPort OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The port number of the port which offers the
+ lowest cost path from this bridge to the root
+ bridge."
+ REFERENCE
+ "IEEE 802.1D-1990: Section 4.5.3.3"
+ ::= { rldot1dStpVlanEntry 7 }
+
+rldot1dStpMaxAge OBJECT-TYPE
+ SYNTAX Timeout
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The maximum age of Spanning Tree Protocol
+ information learned from the network on any port
+ before it is discarded, in units of hundredths of
+ a second. This is the actual value that this
+ bridge is currently using."
+ REFERENCE
+ "IEEE 802.1D-1990: Section 4.5.3.4"
+ ::= { rldot1dStpVlanEntry 8 }
+
+rldot1dStpHelloTime OBJECT-TYPE
+ SYNTAX Timeout
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The amount of time between the transmission of
+ Configuration bridge PDUs by this node on any port
+ when it is the root of the spanning tree or trying
+ to become so, in units of hundredths of a second.
+ This is the actual value that this bridge is
+ currently using."
+ REFERENCE
+ "IEEE 802.1D-1990: Section 4.5.3.5"
+ ::= { rldot1dStpVlanEntry 9 }
+
+rldot1dStpHoldTime OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This time value determines the interval length
+ during which no more than two Configuration bridge
+ PDUs shall be transmitted by this node, in units
+ of hundredths of a second."
+ REFERENCE
+ "IEEE 802.1D-1990: Section 4.5.3.14"
+ ::= { rldot1dStpVlanEntry 10 }
+
+rldot1dStpForwardDelay OBJECT-TYPE
+ SYNTAX Timeout
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This time value, measured in units of hundredths
+ of a second, controls how fast a port changes its
+ spanning state when moving towards the Forwarding
+ state. The value determines how long the port
+ stays in each of the Listening and Learning
+ states, which precede the Forwarding state. This
+ value is also used, when a topology change has
+ been detected and is underway, to age all dynamic
+ entries in the Forwarding Database. [Note that
+ this value is the one that this bridge is
+ currently using, in contrast to
+ dot1dStpBridgeForwardDelay which is the value that
+ this bridge and all others would start using
+ if/when this bridge were to become the root.]"
+ REFERENCE
+ "IEEE 802.1D-1990: Section 4.5.3.6"
+ ::= { rldot1dStpVlanEntry 11 }
+
+--
+-- rldot1dStpVlanPortTable
+--
+rldot1dStpVlanPortTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Rldot1dStpVlanPortEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table that contains pair <vlan, port> specific information
+ for the Spanning Tree Protocol."
+ ::= { rldot1dStp 7 }
+
+rldot1dStpVlanPortEntry OBJECT-TYPE
+ SYNTAX Rldot1dStpVlanPortEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of information maintained by every pair <vlan, port>
+ about the Spanning Tree Protocol state for that pair."
+ INDEX { rldot1dStpVlanPortVlan, rldot1dStpVlanPortPort }
+ ::= { rldot1dStpVlanPortTable 1 }
+
+Rldot1dStpVlanPortEntry ::= SEQUENCE {
+ rldot1dStpVlanPortVlan INTEGER,
+ rldot1dStpVlanPortPort INTEGER,
+ rldot1dStpVlanPortPriority INTEGER,
+ rldot1dStpVlanPortState INTEGER,
+ rldot1dStpVlanPortEnable INTEGER,
+ rldot1dStpVlanPortPathCost INTEGER,
+ rldot1dStpVlanPortDesignatedRoot BridgeId,
+ rldot1dStpVlanPortDesignatedCost INTEGER,
+ rldot1dStpVlanPortDesignatedBridge BridgeId,
+ rldot1dStpVlanPortDesignatedPort OCTET STRING,
+ rldot1dStpVlanPortForwardTransitions Counter
+}
+
+rldot1dStpVlanPortVlan OBJECT-TYPE
+ SYNTAX INTEGER (1..4095)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Vlan number that the port belongs to, and for which this entry
+ contains Spanning Tree Protocol management
+ information."
+ REFERENCE
+ "IEEE 802.1s/D2-1999 "
+ ::= { rldot1dStpVlanPortEntry 1 }
+
+rldot1dStpVlanPortPort OBJECT-TYPE
+ SYNTAX INTEGER (1..4096)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The port number of the port for which this entry
+ contains Spanning Tree Protocol management
+ information."
+ REFERENCE
+ "IEEE 802.1t/D2-1999: Section 9.2.6"
+ ::= { rldot1dStpVlanPortEntry 2 }
+
+rldot1dStpVlanPortPriority OBJECT-TYPE
+ SYNTAX INTEGER (0..255)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The value of the priority field which is
+ contained in the more significant 4 bits of the most
+ significant octet of the (2 octet long) Port ID.
+ The other octet of the Port ID is given by the value
+ of rldot1dStpVlanPort."
+ REFERENCE
+ "IEEE 802.1t/D2-1999: Section 9.2.6"
+ ::= { rldot1dStpVlanPortEntry 3 }
+
+rldot1dStpVlanPortState OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(1),
+ blocking(2),
+ listening(3),
+ learning(4),
+ forwarding(5),
+ broken(6)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The port's current state as defined by application of
+ the Spanning Tree Protocol. This state controls what
+ action a port takes on reception of a frame.
+ If the bridge has detected a port that is malfunctioning
+ it will place that port into the broken(6) state. For ports
+ which are disabled (see dot1dStpVlanPortEnable), this object
+ will have a value of disabled(1)."
+ REFERENCE
+ "IEEE 802.1D-1990: Section 4.5.5.2"
+ ::= { rldot1dStpVlanPortEntry 4 }
+
+rldot1dStpVlanPortEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ enabled(1),
+ disabled(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The enabled/disabled status of the port."
+ REFERENCE
+ "IEEE 802.1D-1990: Section 4.5.5.2"
+ ::= { rldot1dStpVlanPortEntry 5 }
+
+rldot1dStpVlanPortPathCost OBJECT-TYPE
+ SYNTAX INTEGER (1..65535)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The contribution of this port to the path cost of
+ paths towards the spanning tree root which include
+ this port. 802.1D-1990 recommends that the
+ default value of this parameter be in inverse
+ proportion to the speed of the attached LAN."
+ REFERENCE
+ "IEEE 802.1D-1990: Section 4.5.5.3"
+ ::= { rldot1dStpVlanPortEntry 6 }
+
+rldot1dStpVlanPortDesignatedRoot OBJECT-TYPE
+ SYNTAX BridgeId
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The unique Bridge Identifier of the Bridge
+ recorded as the Root in the Configuration BPDUs
+ transmitted by the Designated Bridge for the
+ segment to which the port is attached."
+ REFERENCE
+ "IEEE 802.1D-1990: Section 4.5.5.4"
+ ::= { rldot1dStpVlanPortEntry 7 }
+
+rldot1dStpVlanPortDesignatedCost OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The path cost of the Designated Port of the
+ segment connected to this port. This value is
+ compared to the Root Path Cost field in received
+ bridge PDUs."
+ REFERENCE
+ "IEEE 802.1D-1990: Section 4.5.5.5"
+ ::= { rldot1dStpVlanPortEntry 8 }
+
+rldot1dStpVlanPortDesignatedBridge OBJECT-TYPE
+ SYNTAX BridgeId
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Bridge Identifier of the bridge which this
+ port considers to be the Designated Bridge for
+ this port's segment."
+ REFERENCE
+ "IEEE 802.1D-1990: Section 4.5.5.6"
+ ::= { rldot1dStpVlanPortEntry 9 }
+
+rldot1dStpVlanPortDesignatedPort OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (2))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Port Identifier of the port on the Designated
+ Bridge for this port's segment."
+ REFERENCE
+ "IEEE 802.1D-1990: Section 4.5.5.7"
+ ::= { rldot1dStpVlanPortEntry 10 }
+
+rldot1dStpVlanPortForwardTransitions OBJECT-TYPE
+ SYNTAX Counter
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of times this port has transitioned
+ from the Learning state to the Forwarding state."
+ ::= { rldot1dStpVlanPortEntry 11 }
+
+--
+-- STP Private TRAP variables
+--
+rldot1dStpTrapVariable OBJECT IDENTIFIER ::= { rldot1dStp 8 }
+
+rldot1dStpTrapVrblifIndex OBJECT-TYPE
+ SYNTAX InterfaceIndex
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The ifIndex of port which STP status was changed"
+ ::= { rldot1dStpTrapVariable 1 }
+
+rldot1dStpTrapVrblVID OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The VID of VLAN to which the port belongs which STP status was changed"
+ ::= { rldot1dStpTrapVariable 2 }
+
+rldot1dStpTypeAfterReset OBJECT-TYPE
+ SYNTAX INTEGER {
+ perDevice(1),
+ mstp(4)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "New mode of spaning tree supported by the device after the next reset."
+ DEFVAL { perDevice }
+ ::= { rldot1dStp 9 }
+
+rldot1dStpMonitorTime OBJECT-TYPE
+ SYNTAX INTEGER (1..20)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Factor of hello-time during which a port is monotored to determine if it is stable."
+ DEFVAL { 10 }
+ ::= { rldot1dStp 10 }
+
+rldot1dStpBpduCount OBJECT-TYPE
+ SYNTAX INTEGER (1..60)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The number of bpdu that need to received for the link to be considered stable."
+ DEFVAL { 10 }
+ ::= { rldot1dStp 11 }
+
+rldot1dStpLastChanged OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The last time any object in this table was changed
+ by SNMP or other local management means."
+ REFERENCE
+ ""
+ ::= { rldot1dStp 12 }
+
+--
+-- rldot1dStpPortTable
+--
+rldot1dStpPortTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Rldot1dStpPortEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table that contains extended pair port specific information."
+ ::= { rldot1dStp 13 }
+
+rldot1dStpPortEntry OBJECT-TYPE
+ SYNTAX Rldot1dStpPortEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of information maintained by every port
+ about the Spanning Tree Protocol state for that port."
+ INDEX { rldot1dStpPortPort }
+ ::= { rldot1dStpPortTable 1 }
+
+Rldot1dStpPortEntry ::= SEQUENCE {
+ rldot1dStpPortPort INTEGER,
+ rldot1dStpPortDampEnable TruthValue,
+ rldot1dStpPortDampStable TruthValue,
+ rldot1dStpPortFilterBpdu INTEGER,
+ rldot1dStpPortBpduSent Counter32,
+ rldot1dStpPortBpduReceived Counter32,
+ rldot1dStpPortRole INTEGER,
+ rldot1dStpBpduType INTEGER,
+ rldot1dStpPortRestrictedRole TruthValue,
+ rldot1dStpPortAutoEdgePort TruthValue,
+ rldot1dStpPortLoopback TruthValue,
+ rldot1dStpPortBpduOperStatus INTEGER
+}
+
+rldot1dStpPortPort OBJECT-TYPE
+ SYNTAX INTEGER (1..4096)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The port number of the port for which this entry
+ contains Spanning Tree Protocol management
+ information."
+ REFERENCE
+ "IEEE 802.1t/D2-1999: Section 9.2.6"
+ ::= { rldot1dStpPortEntry 1 }
+
+rldot1dStpPortDampEnable OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Specified if dampening is enabled on this port."
+ REFERENCE
+ ""
+ DEFVAL { false }
+ ::= { rldot1dStpPortEntry 2 }
+
+rldot1dStpPortDampStable OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specified if the port is stable."
+ REFERENCE
+ ""
+ DEFVAL { true }
+ ::= { rldot1dStpPortEntry 3 }
+
+rldot1dStpPortFilterBpdu OBJECT-TYPE
+ SYNTAX INTEGER {
+ false(0),
+ true(1),
+ none(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Specified if this port should filter bpdus when stp is disabled."
+ REFERENCE
+ ""
+ DEFVAL { none }
+ ::= { rldot1dStpPortEntry 4 }
+
+rldot1dStpPortBpduSent OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specified the number of bpdu sent from this port."
+ REFERENCE
+ ""
+ ::= { rldot1dStpPortEntry 5 }
+
+rldot1dStpPortBpduReceived OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specified the number of bpdu received in this port."
+ REFERENCE
+ ""
+ ::= { rldot1dStpPortEntry 6 }
+
+rldot1dStpPortRole OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown(0),
+ disabled(1),
+ alternate(2),
+ backup(3),
+ root(4),
+ designated(5)
+ }
+
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specified the role of this this port."
+ REFERENCE
+ ""
+ ::= { rldot1dStpPortEntry 7 }
+
+rldot1dStpBpduType OBJECT-TYPE
+ SYNTAX INTEGER {
+ stp(0),
+ rstp(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specified the type of BPDU transmitted by this port."
+ ::= { rldot1dStpPortEntry 8 }
+
+rldot1dStpPortRestrictedRole OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "If TRUE causes the Port not to be selected as Root Port for the CIST or
+ any MSTI, even if it has the best spanning tree priority vector.
+ Such a Port will be selected as an Alternate Port after the Root Port
+ has been selected."
+ REFERENCE
+ "IEEE 802.1ad-D3-1: Section 13.24.29"
+ DEFVAL { false }
+ ::= { rldot1dStpPortEntry 9 }
+
+rldot1dStpPortAutoEdgePort OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "If TRUE causes the Port when become up, to enter the blocking state,
+ and if during 3 seconds it doesn't receive a BPDU, it will enter
+ the forwarding state."
+ REFERENCE
+ "IEEE 802.1D-2004: Section 17.13.3"
+ DEFVAL { false }
+ ::= { rldot1dStpPortEntry 10 }
+
+rldot1dStpPortLoopback OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specified loopback was detected on port.
+ Usable for only a short period of time if stp loopback guard is enabled
+ (since port enters into shutdown state)."
+ REFERENCE
+ ""
+ ::= { rldot1dStpPortEntry 11 }
+
+rldot1dStpPortBpduOperStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ filter(0),
+ flood(1),
+ bridge(2),
+ stp(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specified BPDU handling operative status for port."
+ REFERENCE
+ ""
+ ::= { rldot1dStpPortEntry 12 }
+
+rldot1dStpPortsEnable OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Enable / Disable spanning tree on ports by default ."
+ DEFVAL { true }
+ ::= { rldot1dStp 14 }
+
+rldot1dStpTaggedFlooding OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "flooding can be done in tagged bpdu ."
+ ::= { rldot1dStp 15 }
+
+rldot1dStpPortBelongToVlanDefault OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The default value of rldot1dStpPortMustBelongToVlan ."
+ ::= { rldot1dStp 16 }
+
+rldot1dStpEnableByDefault OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The default value of rldot1dStpEnable ."
+ ::= { rldot1dStp 17 }
+
+rldot1dStpPortToDefault OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "To order port/s to revert to default setings ."
+ ::= { rldot1dStp 18 }
+
+rldot1dStpSupportedType OBJECT-TYPE
+ SYNTAX INTEGER {
+ perDevice(1),
+ perVlan(2),
+ mstp(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The type of stp supported by the device."
+ ::= { rldot1dStp 19 }
+
+rldot1dStpEdgeportSupportInStp OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "If EdgePort is supported in stpCompatible mode ."
+ ::= { rldot1dStp 20 }
+
+rldot1dStpFilterBpdu OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Specified if the device should filter BPDUs when STP is disabled."
+ ::= { rldot1dStp 21 }
+
+rldot1dStpFloodBpduMethod OBJECT-TYPE
+ SYNTAX INTEGER {
+ classic(0),
+ bridging(1) }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Specified flooding method:
+ 1 - classic - untagged to all stp disabled ports
+ 2 - bridging -normal bridging."
+ ::= { rldot1dStp 22 }
+
+rldot1dStpSeparatedBridges OBJECT IDENTIFIER ::= { rldot1dStp 23 }
+
+--
+-- rldot1dStpPortBpduGuardTable
+--
+rldot1dStpPortBpduGuardTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Rldot1dStpPortBpduGuardEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table that contains for each port whether it is bpdu guard ."
+ ::= { rldot1dStp 24 }
+
+rldot1dStpPortBpduGuardEntry OBJECT-TYPE
+ SYNTAX Rldot1dStpPortBpduGuardEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of information maintained by every port
+ whether it is bpdu guard."
+ INDEX { dot1dBasePort }
+ ::= { rldot1dStpPortBpduGuardTable 1 }
+
+Rldot1dStpPortBpduGuardEntry ::= SEQUENCE {
+ rldot1dStpPortBpduGuardEnable TruthValue
+}
+
+
+rldot1dStpPortBpduGuardEnable OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Specified if bpdu guard is enabled on this port."
+ REFERENCE
+ ""
+ DEFVAL { false }
+ ::= { rldot1dStpPortBpduGuardEntry 1 }
+
+rldot1dStpLoopbackGuardEnable OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Define if STP loopback guard feature is globally enabled."
+ DEFVAL { false }
+ ::= { rldot1dStp 25 }
+
+rldot1dStpSeparatedBridgesTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Rldot1dStpSeparatedBridgesEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Define if separated bridges feature is enabled for each interface."
+ ::= { rldot1dStpSeparatedBridges 1 }
+
+rldot1dStpSeparatedBridgesEntry OBJECT-TYPE
+ SYNTAX Rldot1dStpSeparatedBridgesEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Defines the contents of each line in the rlSeparatedBridgesTable table."
+ INDEX { ifIndex }
+ ::= { rldot1dStpSeparatedBridgesTable 1 }
+
+Rldot1dStpSeparatedBridgesEntry ::= SEQUENCE {
+ rldot1dStpSeparatedBridgesPortEnable TruthValue
+}
+
+rldot1dStpSeparatedBridgesPortEnable OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This variable indicates whether the separated bridge feature is enabled on a specified ifIndex."
+ DEFVAL { false }
+ ::= { rldot1dStpSeparatedBridgesEntry 1 }
+
+rldot1dStpSeparatedBridgesEnable OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enable / Disable Separated Bridges Feature."
+ DEFVAL { false }
+ ::= { rldot1dStpSeparatedBridges 2 }
+
+rldot1dStpSeparatedBridgesAutoConfig OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enable / Disable Separated Bridges Automatic Configuration."
+ DEFVAL { false }
+ ::= { rldot1dStpSeparatedBridges 3 }
+
+
+rldot1dStpDisabledPortStateTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Rldot1dStpDisabledPortStateEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Define stp port state for each stp disabled interface.
+ This is auxiliary MIB emulates stp enabled port behaviour in ASIC for stp disabled port.
+ The MIB contains only stp disabled ports entries "
+ ::= { rldot1dStp 26 }
+
+rldot1dStpDisabledPortStateEntry OBJECT-TYPE
+ SYNTAX Rldot1dStpDisabledPortStateEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Defines the contents of each line in the rldot1dStpDisabledPortStateTable table."
+ INDEX { dot1dStpPort }
+ ::= { rldot1dStpDisabledPortStateTable 1 }
+
+Rldot1dStpDisabledPortStateEntry ::= SEQUENCE {
+ rldot1dStpDisabledPortState INTEGER
+
+}
+
+
+rldot1dStpDisabledPortState OBJECT-TYPE
+ SYNTAX INTEGER {
+ blocking(2),
+ listening(3),
+ learning(4),
+ forwarding(5)
+
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The port's stp state as defined by external
+ application . This state controls what action a port takes on
+ reception of a frame."
+
+ DEFVAL {forwarding}
+ ::= { rldot1dStpDisabledPortStateEntry 1 }
+
+
+rldot1dExtBase OBJECT IDENTIFIER ::= { rlpBridgeMIBObjects 3 }
+
+rldot1dExtBaseMibVersion OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "MIB's version, the current version is 1."
+ ::= { rldot1dExtBase 1 }
+
+rldot1dDeviceCapabilities OBJECT-TYPE
+-- SYNTAX BITS {
+-- rldot1dIGMPSnoopingFilteringServices(0)
+-- ## can perform filtering of
+-- ## individual multicast addresses
+-- ## controlled by IGMP snooping.
+-- rldot1dDefaultFilteringAllServices(1)
+-- ## can perform default filtering
+-- ## behavior for All multicast addresses.
+-- ## controlled by Multicast DB.
+-- rldot1dDefaultFilteringUnregServices(2)
+-- ## can perform default filtering
+-- ## behavior for Unregistered
+-- ## multicast addresses.
+-- ## controlled by Multicast DB.
+-- }
+ SYNTAX OCTET STRING (SIZE(1))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the optional parts of private extension of
+ IEEE 802.1D and 802.1Q that are implemented by this
+ device and are manageable through this MIB.
+ Capabilities that are allowed on a per-port basis are
+ indicated in dot1dPortCapabilities."
+ ::= { rldot1dExtBase 2 }
+
+
+
+
+rldot1wRStp OBJECT IDENTIFIER ::= { rlpBridgeMIBObjects 4 }
+
+--
+-- rldot1wStpVlanEdgePortTable
+--
+rldot1wRStpVlanEdgePortTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Rldot1wRStpVlanEdgePortEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table that contains pair <vlan, port> specific information
+ for the Rapid Spanning Tree Protocol."
+ ::= { rldot1wRStp 1 }
+
+rldot1wRStpVlanEdgePortEntry OBJECT-TYPE
+ SYNTAX Rldot1wRStpVlanEdgePortEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of information maintained by every pair <vlan, port>
+ about the RAPID Spanning Tree Protocol state for that pair."
+ INDEX { rldot1wRStpVlanEdgePortVlan, rldot1wRStpVlanEdgePortPort }
+ ::= { rldot1wRStpVlanEdgePortTable 1 }
+
+Rldot1wRStpVlanEdgePortEntry ::= SEQUENCE {
+ rldot1wRStpVlanEdgePortVlan INTEGER,
+ rldot1wRStpVlanEdgePortPort INTEGER,
+ rldot1wRStpEdgePortStatus TruthValue
+}
+
+rldot1wRStpVlanEdgePortVlan OBJECT-TYPE
+ SYNTAX INTEGER (1..4095)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Vlan number that the port belongs to, and for which this entry
+ contains Spanning Tree Protocol management information,
+ If STP per device then only one value of 1 is allowed.
+ If STP per a VLAN then all value of 1..4095 are allowed."
+ ::= { rldot1wRStpVlanEdgePortEntry 1 }
+
+rldot1wRStpVlanEdgePortPort OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The port number of the port for which this entry
+ contains Spanning Tree Protocol management information."
+ ::= { rldot1wRStpVlanEdgePortEntry 2 }
+
+rldot1wRStpEdgePortStatus OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Specifies whether this port is an Edge Port or not"
+ REFERENCE
+ "IEEE 802.1wd6-2000: Section 17.13.3.1 "
+ DEFVAL { false }
+ ::= { rldot1wRStpVlanEdgePortEntry 3 }
+
+--
+-- rldot1wStpForceVersionTable
+--
+rldot1wRStpForceVersionTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Rldot1wRStpForceVersionEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table that contains <vlan> specific information
+ for the Rapid Spanning Tree Protocol."
+ ::= { rldot1wRStp 2 }
+
+rldot1wRStpForceVersionEntry OBJECT-TYPE
+ SYNTAX Rldot1wRStpForceVersionEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of information maintained by every <vlan>
+ about the RAPID Spanning Tree Protocol state for that pair."
+ INDEX { rldot1wRStpForceVersionVlan }
+ ::= { rldot1wRStpForceVersionTable 1 }
+
+Rldot1wRStpForceVersionEntry ::= SEQUENCE {
+ rldot1wRStpForceVersionVlan INTEGER,
+ rldot1wRStpForceVersionState INTEGER
+}
+
+rldot1wRStpForceVersionVlan OBJECT-TYPE
+ SYNTAX INTEGER (1..4095)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Vlan number that the port belongs to, and for which this entry
+ contains Spanning Tree Protocol management information,
+ If STP per device then only one value of 1 is allowed.
+ If STP per a VLAN then all value of 1..4095 are allowed."
+ ::= { rldot1wRStpForceVersionEntry 1 }
+
+rldot1wRStpForceVersionState OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Specifies whether this Bridge uses the normal RSTP algorithm,
+ or STP Compatibility algorythm:
+ 0 - STP Compatibility
+ 2 - Normal RSTP"
+ REFERENCE
+ "IEEE 802.1wd9-2000: Section 17.16.1 "
+ DEFVAL { 2 }
+ ::= { rldot1wRStpForceVersionEntry 2 }
+
+rldot1pPriorityMap OBJECT IDENTIFIER ::= { rlpBridgeMIBObjects 5 }
+
+rldot1pPriorityMapState OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable (1),
+ disable (2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "enable / disable"
+ ::= { rldot1pPriorityMap 1 }
+
+rldot1pPriorityMapTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Rldot1pPriorityMapEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table hold information the priority maps"
+ ::= { rldot1pPriorityMap 2 }
+
+rldot1pPriorityMapEntry OBJECT-TYPE
+ SYNTAX Rldot1pPriorityMapEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The row definition for this table."
+ INDEX { rldot1pPriorityMapName }
+ ::= { rldot1pPriorityMapTable 1 }
+
+Rldot1pPriorityMapEntry ::= SEQUENCE {
+ rldot1pPriorityMapName DisplayString,
+ rldot1pPriorityMapPriority OCTET STRING,
+ rldot1pPriorityMapPort PortList,
+ rldot1pPriorityMapPortList PortList,
+ rldot1pPriorityMapStatus RowStatus
+}
+
+rldot1pPriorityMapName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (1..25))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The map name"
+ ::= { rldot1pPriorityMapEntry 1 }
+
+rldot1pPriorityMapPriority OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (8))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The map holding the queue"
+ ::= { rldot1pPriorityMapEntry 2 }
+
+rldot1pPriorityMapPort OBJECT-TYPE
+ SYNTAX PortList
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "the port that the map, is applied on in config"
+ ::= { rldot1pPriorityMapEntry 3 }
+
+rldot1pPriorityMapPortList OBJECT-TYPE
+ SYNTAX PortList
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "the ports that the map, is applied on in actual"
+ ::= { rldot1pPriorityMapEntry 4 }
+
+rldot1pPriorityMapStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The status of the table entry. It's used to delete an entry"
+ ::= { rldot1pPriorityMapEntry 5 }
+
+
+
+
+
+rldot1sMstp OBJECT IDENTIFIER ::= { rlpBridgeMIBObjects 6 }
+
+--
+-- The Multiple Spanning Tree Instance Table
+--
+rldot1sMstpInstanceTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Rldot1sMstpInstanceEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table that contains Mstp instance specific information
+ for the Multiple Spanning Tree Protocol."
+ ::= { rldot1sMstp 1 }
+
+rldot1sMstpInstanceEntry OBJECT-TYPE
+ SYNTAX Rldot1sMstpInstanceEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of information maintained by every instance
+ about the multiple Spanning Tree Protocol state for
+ that instance."
+ INDEX { rldot1sMstpInstanceId }
+ ::= { rldot1sMstpInstanceTable 1 }
+
+Rldot1sMstpInstanceEntry ::= SEQUENCE {
+ rldot1sMstpInstanceId INTEGER,
+ rldot1sMstpInstanceEnable TruthValue,
+ rldot1sMstpInstanceTimeSinceTopologyChange TimeTicks,
+ rldot1sMstpInstanceTopChanges Counter,
+ rldot1sMstpInstanceDesignatedRoot BridgeId,
+ rldot1sMstpInstanceRootCost INTEGER,
+ rldot1sMstpInstanceRootPort INTEGER,
+ rldot1sMstpInstanceMaxAge Timeout,
+ rldot1sMstpInstanceHelloTime Timeout,
+ rldot1sMstpInstanceHoldTime INTEGER,
+ rldot1sMstpInstanceForwardDelay Timeout,
+ rldot1sMstpInstancePriority INTEGER,
+ rldot1sMstpInstanceRemainingHopes INTEGER
+}
+
+rldot1sMstpInstanceId OBJECT-TYPE
+ SYNTAX INTEGER (1..64)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Instance index."
+ ::= { rldot1sMstpInstanceEntry 1 }
+
+rldot1sMstpInstanceEnable OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies whether this Instance is STP enable or disable"
+ REFERENCE
+ " ?? "
+ ::= { rldot1sMstpInstanceEntry 2 }
+
+rldot1sMstpInstanceTimeSinceTopologyChange OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The time (in hundredths of a second) since the
+ last time a topology change was detected by the
+ Mstp Instance ."
+ REFERENCE
+ "IEEE 802.1D-1990: Section 6.8.1.1.3"
+ ::= { rldot1sMstpInstanceEntry 3 }
+
+rldot1sMstpInstanceTopChanges OBJECT-TYPE
+ SYNTAX Counter
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of topology changes detected by
+ this Instance since the management entity was last
+ reset or initialized."
+ REFERENCE
+ "IEEE 802.1D-1990: Section 6.8.1.1.3"
+ ::= { rldot1sMstpInstanceEntry 4 }
+
+rldot1sMstpInstanceDesignatedRoot OBJECT-TYPE
+ SYNTAX BridgeId
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The bridge identifier of the root of the spanning
+ tree as determined by the Muliple Spanning Tree Protocol
+ as executed by this node. This value is used as
+ the Root Identifier parameter in all Configuration
+ Bridge PDUs originated by this node."
+ REFERENCE
+ "IEEE 802.1D-1990: Section 4.5.3.1"
+ ::= { rldot1sMstpInstanceEntry 5 }
+
+rldot1sMstpInstanceRootCost OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The cost of the path to the root as seen from
+ this bridge."
+ REFERENCE
+ "IEEE 802.1D-1990: Section 4.5.3.2"
+ ::= { rldot1sMstpInstanceEntry 6 }
+
+rldot1sMstpInstanceRootPort OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The port number of the port which offers the
+ lowest cost path from this bridge to the root
+ bridge."
+ REFERENCE
+ "IEEE 802.1D-1990: Section 4.5.3.3"
+ ::= { rldot1sMstpInstanceEntry 7 }
+
+rldot1sMstpInstanceMaxAge OBJECT-TYPE
+ SYNTAX Timeout
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The maximum age of Spanning Tree Protocol
+ information learned from the network on any port
+ before it is discarded, in units of hundredths of
+ a second. This is the actual value that this
+ bridge is currently using."
+ REFERENCE
+ "IEEE 802.1D-1990: Section 4.5.3.4"
+ ::= { rldot1sMstpInstanceEntry 8 }
+
+rldot1sMstpInstanceHelloTime OBJECT-TYPE
+ SYNTAX Timeout
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The amount of time between the transmission of
+ Configuration bridge PDUs by this node on any port
+ when it is the root of the spanning tree or trying
+ to become so, in units of hundredths of a second.
+ This is the actual value that this bridge is
+ currently using."
+ REFERENCE
+ "IEEE 802.1D-1990: Section 4.5.3.5"
+ ::= { rldot1sMstpInstanceEntry 9 }
+
+rldot1sMstpInstanceHoldTime OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This time value determines the interval length
+ during which no more than two Configuration bridge
+ PDUs shall be transmitted by this node, in units
+ of hundredths of a second."
+ REFERENCE
+ "IEEE 802.1D-1990: Section 4.5.3.14"
+ ::= { rldot1sMstpInstanceEntry 10 }
+
+rldot1sMstpInstanceForwardDelay OBJECT-TYPE
+ SYNTAX Timeout
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This time value, measured in units of hundredths
+ of a second, controls how fast a port changes its
+ spanning state when moving towards the Forwarding
+ state. The value determines how long the port
+ stays in each of the Listening and Learning
+ states, which precede the Forwarding state. This
+ value is also used, when a topology change has
+ been detected and is underway, to age all dynamic
+ entries in the Forwarding Database. [Note that
+ this value is the one that this bridge is
+ currently using, in contrast to
+ dot1dStpBridgeForwardDelay which is the value that
+ this bridge and all others would start using
+ if/when this bridge were to become the root.]"
+ REFERENCE
+ "IEEE 802.1D-1990: Section 4.5.3.6"
+ ::= { rldot1sMstpInstanceEntry 11 }
+
+rldot1sMstpInstancePriority OBJECT-TYPE
+ SYNTAX INTEGER (0..61440)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The value of the write-able portion of the Bridge
+ ID, i.e., the first four bits of the first octet
+ of the (8 octet long) Bridge ID.The value is a product
+ of 4096. The next 12 bit are the msti id .
+ The other (last) 6 octets of the Bridge ID are given
+ by the value of dot1dBaseBridgeAddress."
+ REFERENCE
+ "IEEE 802.1S-2001: Section 13.24.2"
+ ::= {rldot1sMstpInstanceEntry 12 }
+
+rldot1sMstpInstanceRemainingHopes OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This count value determines the amount of hopes
+ the information transmited by this bridge on this
+ instance can travel."
+ REFERENCE
+ "IEEE 802.1D-1990: Section 4.5.3.14"
+ ::= { rldot1sMstpInstanceEntry 13 }
+
+--
+-- rldot1sMstpInstancePortTable
+--
+rldot1sMstpInstancePortTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Rldot1sMstpInstancePortEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table that contains pair <msti, port> specific information
+ for the Spanning Tree Protocol."
+ ::= { rldot1sMstp 2 }
+
+rldot1sMstpInstancePortEntry OBJECT-TYPE
+ SYNTAX Rldot1sMstpInstancePortEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of information maintained by every pair <msti, port>
+ about the Spanning Tree Protocol state for that pair."
+ INDEX { rldot1sMstpInstancePortMstiId, rldot1sMstpInstancePortPort }
+ ::= { rldot1sMstpInstancePortTable 1 }
+
+Rldot1sMstpInstancePortEntry ::= SEQUENCE {
+ rldot1sMstpInstancePortMstiId INTEGER,
+ rldot1sMstpInstancePortPort INTEGER,
+ rldot1sMstpInstancePortPriority INTEGER,
+ rldot1sMstpInstancePortState INTEGER,
+ rldot1sMstpInstancePortEnable INTEGER,
+ rldot1sMstpInstancePortPathCost INTEGER,
+ rldot1sMstpInstancePortDesignatedRoot BridgeId,
+ rldot1sMstpInstancePortDesignatedCost INTEGER,
+ rldot1sMstpInstancePortDesignatedBridge BridgeId,
+ rldot1sMstpInstancePortDesignatedPort OCTET STRING,
+ rldot1sMstpInstancePortForwardTransitions Counter,
+ rldot1sMStpInstancePortAdminPathCost INTEGER,
+ rldot1sMStpInstancePortRole INTEGER
+
+}
+
+rldot1sMstpInstancePortMstiId OBJECT-TYPE
+ SYNTAX INTEGER (1..64)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Vlan group number that the port belongs to, and for which this entry
+ contains Spanning Tree Protocol management
+ information."
+ REFERENCE
+ "IEEE 802.1s/D11-2001 "
+ ::= { rldot1sMstpInstancePortEntry 1 }
+
+rldot1sMstpInstancePortPort OBJECT-TYPE
+ SYNTAX INTEGER (1..4096)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The port number of the port for which this entry
+ contains Spanning Tree Protocol management
+ information."
+ REFERENCE
+ "IEEE 802.1t/D2-1999: Section 9.2.6"
+ ::= { rldot1sMstpInstancePortEntry 2 }
+
+rldot1sMstpInstancePortPriority OBJECT-TYPE
+ SYNTAX INTEGER (0..240)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The value of the priority field which is
+ contained in the more significant 4 bits of the most
+ significant octet of the (2 octet long) Port ID.
+ The value is a product of 16.
+ The other octet of the Port ID is given by the value
+ of rldot1dStpVlanGroupPort."
+ REFERENCE
+ "IEEE 802.1t/D2-1999: Section 9.2.6"
+ ::= { rldot1sMstpInstancePortEntry 3 }
+
+rldot1sMstpInstancePortState OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(1),
+ blocking(2),
+ listening(3),
+ learning(4),
+ forwarding(5),
+ broken(6)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The port's current state as defined by application of
+ the Spanning Tree Protocol. This state controls what
+ action a port takes on reception of a frame.
+ If the bridge has detected a port that is malfunctioning
+ it will place that port into the broken(6) state. For ports
+ which are disabled (see dot1dStpVlanPortEnable), this object
+ will have a value of disabled(1)."
+ REFERENCE
+ "IEEE 802.1D-1990: Section 4.5.5.2"
+ ::= { rldot1sMstpInstancePortEntry 4 }
+
+rldot1sMstpInstancePortEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ enabled(1),
+ disabled(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The enabled/disabled status of the port."
+ REFERENCE
+ "IEEE 802.1D-1990: Section 4.5.5.2"
+ ::= { rldot1sMstpInstancePortEntry 5 }
+
+rldot1sMstpInstancePortPathCost OBJECT-TYPE
+ SYNTAX INTEGER (1..200000000)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The contribution of this port to the path cost of
+ paths towards the spanning tree root which include
+ this port. 802.1D-1990 recommends that the
+ default value of this parameter be in inverse
+ proportion to the speed of the attached LAN."
+ REFERENCE
+ "IEEE 802.1D-1990: Section 4.5.5.3"
+ ::= { rldot1sMstpInstancePortEntry 6 }
+
+rldot1sMstpInstancePortDesignatedRoot OBJECT-TYPE
+ SYNTAX BridgeId
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The unique Bridge Identifier of the Bridge
+ recorded as the Root in the Configuration BPDUs
+ transmitted by the Designated Bridge for the
+ segment to which the port is attached."
+ REFERENCE
+ "IEEE 802.1D-1990: Section 4.5.5.4"
+ ::= { rldot1sMstpInstancePortEntry 7 }
+
+rldot1sMstpInstancePortDesignatedCost OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The path cost of the Designated Port of the
+ segment connected to this port. This value is
+ compared to the Root Path Cost field in received
+ bridge PDUs."
+ REFERENCE
+ "IEEE 802.1D-1990: Section 4.5.5.5"
+ ::= { rldot1sMstpInstancePortEntry 8 }
+
+rldot1sMstpInstancePortDesignatedBridge OBJECT-TYPE
+ SYNTAX BridgeId
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Bridge Identifier of the bridge which this
+ port considers to be the Designated Bridge for
+ this port's segment."
+ REFERENCE
+ "IEEE 802.1D-1990: Section 4.5.5.6"
+ ::= { rldot1sMstpInstancePortEntry 9 }
+
+rldot1sMstpInstancePortDesignatedPort OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (2))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Port Identifier of the port on the Designated
+ Bridge for this port's segment."
+ REFERENCE
+ "IEEE 802.1D-1990: Section 4.5.5.7"
+ ::= { rldot1sMstpInstancePortEntry 10 }
+
+rldot1sMstpInstancePortForwardTransitions OBJECT-TYPE
+ SYNTAX Counter
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of times this port has transitioned
+ from the Learning state to the Forwarding state."
+ ::= { rldot1sMstpInstancePortEntry 11 }
+
+rldot1sMStpInstancePortAdminPathCost OBJECT-TYPE
+ SYNTAX INTEGER (0..200000000)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The administratively assigned value for the contribution
+ of this port to the path cost of paths towards the spanning
+ tree root.
+
+ Writing a value of '0' assigns the automatically calculated
+ default Path Cost value to the port. If the default Path
+ Cost is being used, this object returns '0' when read.
+
+ This complements the object dot1dStpPortPathCost, which
+ returns the operational value of the path cost."
+ REFERENCE
+ "IEEE 802.1D-1998: Section 8.5.5.3"
+ ::= { rldot1sMstpInstancePortEntry 12 }
+
+rldot1sMStpInstancePortRole OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown(0),
+ disabled(1),
+ alternate(2),
+ backup(3),
+ root(4),
+ designated(5),
+ master(6)
+ }
+
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specify the role of this this port."
+ REFERENCE
+ ""
+ ::= { rldot1sMstpInstancePortEntry 13 }
+
+rldot1sMstpMaxHopes OBJECT-TYPE
+ SYNTAX INTEGER (1..40)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Max number of hopes that an MST BPDU will travel inside a region."
+ DEFVAL { 20 }
+ ::= { rldot1sMstp 3 }
+
+rldot1sMstpConfigurationName OBJECT-TYPE
+ SYNTAX SnmpAdminString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The active configuration name as will be caried in MST BPDU's."
+ ::= { rldot1sMstp 4 }
+
+rldot1sMstpRevisionLevel OBJECT-TYPE
+ SYNTAX INTEGER (0..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The active revision level."
+ DEFVAL { 0 }
+ ::= { rldot1sMstp 5 }
+
+--
+-- rldot1sMstpVlanTable
+--
+rldot1sMstpVlanTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Rldot1sMstpVlanEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table that contains information about the alocation of vlans to groups."
+ ::= { rldot1sMstp 6 }
+
+rldot1sMstpVlanEntry OBJECT-TYPE
+ SYNTAX Rldot1sMstpVlanEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of information maintained by every vlan
+ about the group it belongs to."
+ INDEX { rldot1sMstpVlan }
+ ::= { rldot1sMstpVlanTable 1 }
+
+Rldot1sMstpVlanEntry ::= SEQUENCE {
+ rldot1sMstpVlan INTEGER,
+ rldot1sMstpGroup INTEGER,
+ rldot1sMstpPendingGroup INTEGER
+
+}
+
+rldot1sMstpVlan OBJECT-TYPE
+ SYNTAX INTEGER (1..4094)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The vlan number of the vlan for which this entry
+ contains Spanning Tree Protocol management
+ information."
+ REFERENCE
+ "IEEE 802.1s/D11-2001: Section 13.7"
+ ::= { rldot1sMstpVlanEntry 1 }
+
+rldot1sMstpGroup OBJECT-TYPE
+ SYNTAX INTEGER (0..64)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifid the active group number this vlan belonges to."
+ REFERENCE
+ ""
+ DEFVAL { 0 }
+ ::= { rldot1sMstpVlanEntry 2 }
+
+rldot1sMstpPendingGroup OBJECT-TYPE
+ SYNTAX INTEGER (0..64)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Specifid the pending group number this vlan belonges to."
+ REFERENCE
+ ""
+ DEFVAL { 0 }
+ ::= { rldot1sMstpVlanEntry 3 }
+
+--
+-- rldot1sMstpExtPortTable
+--
+rldot1sMstpExtPortTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Rldot1sMstpExtPortEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table that contains MSTP information about ports of the CIST."
+ ::= { rldot1sMstp 7 }
+
+rldot1sMstpExtPortEntry OBJECT-TYPE
+SYNTAX Rldot1sMstpExtPortEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of information maintained by every port
+ of the CIST."
+ INDEX { rldot1sMstpExtPortPort }
+ ::= { rldot1sMstpExtPortTable 1 }
+
+Rldot1sMstpExtPortEntry ::= SEQUENCE {
+ rldot1sMstpExtPortPort INTEGER,
+ rldot1sMstpExtPortInternalOperPathCost INTEGER,
+ rldot1sMstpExtPortDesignatedRegionalRoot BridgeId,
+ rldot1sMstpExtPortDesignatedRegionalCost INTEGER,
+ rldot1sMstpExtPortBoundary TruthValue,
+ rldot1sMstpExtPortInternalAdminPathCost INTEGER
+
+}
+rldot1sMstpExtPortPort OBJECT-TYPE
+ SYNTAX INTEGER (1..4096)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The port number of the port for which this entry
+ contains Spanning Tree Protocol management
+ information."
+ REFERENCE
+ "IEEE 802.1t/D2-1999: Section 9.2.6"
+ ::= { rldot1sMstpExtPortEntry 1 }
+
+rldot1sMstpExtPortInternalOperPathCost OBJECT-TYPE
+ SYNTAX INTEGER (1..200000000)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The contribution of this port to the path cost of
+ paths towards the spanning tree regional root which
+ include this port. 802.1S-2002 recommends that the
+ default value of this parameter be in inverse
+ proportion to the speed of the attached LAN."
+ ::= { rldot1sMstpExtPortEntry 2 }
+
+rldot1sMstpExtPortDesignatedRegionalRoot OBJECT-TYPE
+ SYNTAX BridgeId
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The unique Bridge Identifier of the Bridge
+ recorded as the Root in the Configuration BPDUs
+ transmitted by the Designated Bridge for the
+ segment to which the port is attached."
+ REFERENCE
+ "IEEE 802.1D-1990: Section 4.5.5.4"
+ ::= { rldot1sMstpExtPortEntry 3 }
+
+rldot1sMstpExtPortDesignatedRegionalCost OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The regional path cost of the Designated Port of the
+ segment connected to this port. This value is
+ compared to the Root Path Cost field in received
+ bridge PDUs."
+ REFERENCE
+ "IEEE 802.1D-1990: Section 4.5.5.5"
+ ::= { rldot1sMstpExtPortEntry 4 }
+
+rldot1sMstpExtPortBoundary OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indication if the port is conented to to a lan segment
+ outside or inside the region."
+ REFERENCE
+ "IEEE 802.1D-1990: Section 4.5.5.5"
+ ::= { rldot1sMstpExtPortEntry 5 }
+
+rldot1sMstpExtPortInternalAdminPathCost OBJECT-TYPE
+ SYNTAX INTEGER (0..200000000)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The administratively assigned value for the contribution
+ of this port to the path cost of paths towards the spanning
+ tree root.
+
+ Writing a value of '0' assigns the automatically calculated
+ default Path Cost value to the port. If the default Path
+ Cost is being used, this object returns '0' when read.
+
+ This complements the object dot1dStpPortPathCost, which
+ returns the operational value of the path cost."
+
+ ::= { rldot1sMstpExtPortEntry 6 }
+
+rldot1sMstpDesignatedMaxHopes OBJECT-TYPE
+ SYNTAX INTEGER (1..40)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Max number of hopes that an MST BPDU will travel inside a region."
+ ::= { rldot1sMstp 8 }
+
+rldot1sMstpRegionalRoot OBJECT-TYPE
+ SYNTAX BridgeId
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "CIST Regional Root Identifier (13.16.4).
+ The Bridge Identifier of the current CIST Regional Root."
+ REFERENCE
+ "IEEE 802.1S-2002: Section 13.16.4"
+ ::= { rldot1sMstp 9 }
+
+rldot1sMstpRegionalRootCost OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The CIST path cost from the transmitting Bridge to the
+ CIST Regional Root."
+ REFERENCE
+ "IEEE 802.1S-2002: Section 12.8.1.1.3"
+ ::= { rldot1sMstp 10 }
+
+rldot1sMstpPendingConfigurationName OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE(1..32))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The pending configuration name."
+ ::= { rldot1sMstp 11 }
+
+rldot1sMstpPendingRevisionLevel OBJECT-TYPE
+ SYNTAX INTEGER (0..65535)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The pending revision level."
+ DEFVAL { 0 }
+ ::= { rldot1sMstp 12 }
+
+rldot1sMstpPendingAction OBJECT-TYPE
+ SYNTAX INTEGER {
+ copyPendingActive(1),
+ copyActivePending(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The action to be done with the pending configuration.
+ copyPendingActive - to copy the pending mst configuration to the active one.
+ copyActivePending - to copy the active mst configuration to the pending one. "
+ ::= { rldot1sMstp 13 }
+
+rldot1sMstpRemainingHops OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This count value determines the amount of hops
+ the information transmitted by this bridge can travel."
+ ::= { rldot1sMstp 14 }
+
+--
+-- rldot1sMstpInstanceVlanTable
+--
+rldot1sMstpInstanceVlanTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Rldot1sMstpInstanceVlanEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table contains vlan lists per MSTP instances."
+ ::= { rldot1sMstp 15 }
+
+rldot1sMstpInstanceVlanEntry OBJECT-TYPE
+ SYNTAX Rldot1sMstpInstanceVlanEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ " The entry contains vlan lists per specific MSTP instance."
+ INDEX { rldot1sMstpInstanceVlanId }
+ ::= { rldot1sMstpInstanceVlanTable 1 }
+
+Rldot1sMstpInstanceVlanEntry::= SEQUENCE {
+ rldot1sMstpInstanceVlanId INTEGER,
+ rldot1sMstpInstanceVlanId1To1024 VlanList1,
+ rldot1sMstpInstanceVlanId1025To2048 VlanList2,
+ rldot1sMstpInstanceVlanId2049To3072 VlanList3,
+ rldot1sMstpInstanceVlanId3073To4094 VlanList4
+ }
+
+rldot1sMstpInstanceVlanId OBJECT-TYPE
+ SYNTAX INTEGER (0..64)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifiy the instance number."
+ ::= { rldot1sMstpInstanceVlanEntry 1 }
+
+rldot1sMstpInstanceVlanId1To1024 OBJECT-TYPE
+ SYNTAX VlanList1
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "first VlanId List of specific MSTP instance."
+ ::= { rldot1sMstpInstanceVlanEntry 2 }
+
+rldot1sMstpInstanceVlanId1025To2048 OBJECT-TYPE
+ SYNTAX VlanList2
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "second VlanId List of specific MSTP instance."
+ ::= { rldot1sMstpInstanceVlanEntry 3 }
+
+rldot1sMstpInstanceVlanId2049To3072 OBJECT-TYPE
+ SYNTAX VlanList3
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "third VlanId List of specific MSTP instance."
+ ::= { rldot1sMstpInstanceVlanEntry 4 }
+
+rldot1sMstpInstanceVlanId3073To4094 OBJECT-TYPE
+ SYNTAX VlanList4
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "fourth VlanId List of specific MSTP instance."
+ ::= { rldot1sMstpInstanceVlanEntry 5 }
+
+rldot1dTpAgingTime OBJECT IDENTIFIER ::= { rlpBridgeMIBObjects 7 }
+
+rldot1dTpAgingTimeMin OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The min timeout period in seconds for aging out
+ dynamically learned forwarding information."
+ REFERENCE
+ "P802.1d/D9, July 14, 1989: Section 6.7.1.1.3"
+ ::= { rldot1dTpAgingTime 1 }
+
+rldot1dTpAgingTimeMax OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The max timeout period in seconds for aging out
+ dynamically learned forwarding information."
+ REFERENCE
+ "P802.1d/D9, July 14, 1989: Section 6.7.1.1.3"
+ ::= { rldot1dTpAgingTime 2 }
+
+
+
+
+END
+
|