summaryrefslogtreecommitdiff
path: root/MIBS/junose/ATM2-MIB
diff options
context:
space:
mode:
authorDavid Leutgeb <david.leutgeb@mannundmouse.com>2023-12-05 12:25:34 +0100
committerDavid Leutgeb <david.leutgeb@mannundmouse.com>2023-12-05 12:25:34 +0100
commit98a672123c7872f6b9b75a9a2b6bb3aea504de6a (patch)
tree9b13bd7f563c3198047bd359195327cf28b3caf0 /MIBS/junose/ATM2-MIB
downloadmibs-main.tar.gz
mibs-main.zip
Initial commitHEADmain
Diffstat (limited to 'MIBS/junose/ATM2-MIB')
-rw-r--r--MIBS/junose/ATM2-MIB3246
1 files changed, 3246 insertions, 0 deletions
diff --git a/MIBS/junose/ATM2-MIB b/MIBS/junose/ATM2-MIB
new file mode 100644
index 0000000..1358250
--- /dev/null
+++ b/MIBS/junose/ATM2-MIB
@@ -0,0 +1,3246 @@
+
+ATM2-MIB DEFINITIONS ::= BEGIN
+
+ IMPORTS
+ MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
+ Gauge32, Counter32, Integer32
+ FROM SNMPv2-SMI
+ TruthValue, RowStatus, TimeStamp
+ FROM SNMPv2-TC
+ MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
+ FROM SNMPv2-CONF
+ SnmpAdminString
+ FROM SNMP-FRAMEWORK-MIB
+ InterfaceIndex, InterfaceIndexOrZero, ifIndex
+ FROM IF-MIB
+ atmMIBObjects, atmInterfaceConfEntry,
+ atmVplEntry, atmVplVpi,
+ atmVclEntry, atmVclVpi, atmVclVci,
+ atmVpCrossConnectEntry, atmVcCrossConnectEntry
+ FROM ATM-MIB
+ AtmAddr, AtmSigDescrParamIndex,
+ AtmInterfaceType, AtmIlmiNetworkPrefix,
+ AtmVcIdentifier, AtmVpIdentifier,
+ AtmTrafficDescrParamIndex
+ FROM ATM-TC-MIB;
+
+ atm2MIB MODULE-IDENTITY
+ LAST-UPDATED "200309230000Z"
+ ORGANIZATION "IETF AToMMIB Working Group"
+ CONTACT-INFO
+ "AToMMIB WG
+ http://www.ietf.org/html.charters/atommib-charter.html
+ Editors:
+ Faye Ly
+ Postal: Pedestal Networks
+ 6503 Dumbarton Circle
+ Fremont, CA 94555
+ USA
+ Tel: +1 510 896 2908
+ E-Mail: faye@pedestalnetworks.com
+
+ Michael Noto
+ Postal: Cisco Systems
+ 170 W. Tasman Drive
+ San Jose, CA 95134-1706
+ USA
+
+ E-mail: mnoto@cisco.com
+
+ Andrew Smith
+ Postal: Consultant
+
+ E-Mail: ah_smith@acm.org
+
+ Ethan Mickey Spiegel
+ Postal: Cisco Systems
+ 170 W. Tasman Drive
+ San Jose, CA 95134-1706
+ USA
+ Tel: +1 408 526 6408
+ Fax: +1 408 526 6488
+ E-Mail: mspiegel@cisco.com
+
+ Kaj Tesink
+ Postal: Telcordia Technologies
+ 331 Newman Springs Road
+ Red Bank, NJ 07701
+ USA
+ Tel: +1 732 758 5254
+ E-mail: kaj@research.telcordia.com"
+ DESCRIPTION
+ "Copyright (C) The Internet Society (2003). This version of
+ this MIB module is part of RFC 3606; see the RFC itself for
+ full legal notices.
+
+ This MIB Module is a supplement to the ATM-MIB
+ defined in RFC 2515."
+ REVISION "200309230000Z"
+ DESCRIPTION
+ "Initial version of this MIB, published as RFC 3606."
+
+ ::= { atmMIBObjects 14 }
+
+ atm2MIBObjects OBJECT IDENTIFIER ::= {atm2MIB 1}
+
+ atm2MIBTraps OBJECT IDENTIFIER ::= {atm2MIB 2}
+
+ -- This ATM2-MIB Module consists of the following tables,
+ -- plus ATM trap support:
+ -- 1. atmSvcVpCrossConnectTable
+ -- 2. atmSvcVcCrossConnectTable
+ -- 3. atmSigStatTable
+ -- 4. atmSigSupportTable
+ -- 5. atmSigDescrParamTable
+ -- 6. atmIfRegisteredAddrTable
+ -- 7. atmVclAddrTable
+ -- 8. atmAddrVclTable
+ -- 9. atmVplStatTable
+ -- 10. atmVplLogicalPortTable
+ -- 11. atmVclStatTable
+ -- 12. atmAal5VclStatTable
+ -- 13. atmVclGenTable
+ -- 14. atmInterfaceExtTable
+ -- 15. atmIlmiSrvcRegTable
+ -- 16. atmIlmiNetworkPrefixTable
+ -- 17. atmSwitchAddressTable
+ -- 18. atmVpCrossConnectXTable
+ -- 19. atmVcCrossConnectXTable
+ -- 20. atmCurrentlyFailingPVplTable
+ -- 21. atmCurrentlyFailingPVclTable
+
+ -- 1. ATM VPL SVC Cross-Connect Table
+
+ atmSvcVpCrossConnectTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF
+ AtmSvcVpCrossConnectEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The ATM SVPC Cross-Connect table. A
+ bi-directional VP cross-connect between two
+ switched VPLs is modeled as one entry in this
+ table. A Soft PVPC cross-connect, between a
+ soft permanent VPL and a switched VPL, is
+ also modeled as one entry in this table."
+ ::= { atm2MIBObjects 1 }
+
+ atmSvcVpCrossConnectEntry OBJECT-TYPE
+ SYNTAX AtmSvcVpCrossConnectEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in the ATM SVPC Cross-Connect table.
+ This entry is used to model a bi-directional
+ ATM VP cross-connect between two VPLs."
+ INDEX { atmSvcVpCrossConnectIndex,
+ atmSvcVpCrossConnectLowIfIndex,
+ atmSvcVpCrossConnectLowVpi,
+ atmSvcVpCrossConnectHighIfIndex,
+ atmSvcVpCrossConnectHighVpi }
+ ::= { atmSvcVpCrossConnectTable 1 }
+
+ AtmSvcVpCrossConnectEntry ::= SEQUENCE {
+ atmSvcVpCrossConnectIndex INTEGER,
+ atmSvcVpCrossConnectLowIfIndex InterfaceIndex,
+ atmSvcVpCrossConnectLowVpi AtmVpIdentifier,
+ atmSvcVpCrossConnectHighIfIndex InterfaceIndex,
+ atmSvcVpCrossConnectHighVpi AtmVpIdentifier,
+ atmSvcVpCrossConnectCreationTime TimeStamp,
+ atmSvcVpCrossConnectRowStatus RowStatus
+ }
+
+ atmSvcVpCrossConnectIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..2147483647)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A unique value to identify this SVPC
+ cross-connect. For each VP associated
+ with this cross-connect, the agent reports
+ this cross-connect index value in the
+ atmVplCrossConnectIdentifer attribute of the
+ corresponding atmVplTable entries."
+ ::= { atmSvcVpCrossConnectEntry 1 }
+
+ atmSvcVpCrossConnectLowIfIndex OBJECT-TYPE
+ SYNTAX InterfaceIndex
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The value of this object is equal to the
+ ifIndex value of the ATM interface port for this
+ SVPC cross-connect. The term low implies
+ that this ATM interface has the numerically lower
+ ifIndex value than the other ATM interface
+ identified in the same atmSvcVpCrossConnectEntry."
+ ::= { atmSvcVpCrossConnectEntry 2 }
+
+ atmSvcVpCrossConnectLowVpi OBJECT-TYPE
+ SYNTAX AtmVpIdentifier
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The value of this object is equal to the VPI
+ value associated with the SVPC cross-connect
+ at the ATM interface that is identified by
+ atmSvcVpCrossConnectLowIfIndex. The VPI value
+ cannot exceed the number supported by the
+ atmInterfaceCurrentMaxSvpcVpi at the low ATM interface
+ port."
+ ::= { atmSvcVpCrossConnectEntry 3 }
+
+ atmSvcVpCrossConnectHighIfIndex OBJECT-TYPE
+ SYNTAX InterfaceIndex
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The value of this object is equal to the
+ ifIndex value of the ATM interface port for
+ this SVC VP cross-connect. The term high
+ implies that this ATM interface has the
+ numerically higher ifIndex value than the
+ other ATM interface identified in the same
+ atmSvcVpCrossConnectEntry."
+ ::= { atmSvcVpCrossConnectEntry 4 }
+
+ atmSvcVpCrossConnectHighVpi OBJECT-TYPE
+ SYNTAX AtmVpIdentifier
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The value of this object is equal to the VPI
+ value associated with the SVPC cross-connect
+ at the ATM interface that is identified by
+ atmSvcVpCrossConnectHighIfIndex. The VPI value
+ cannot exceed the number supported by the
+ atmInterfaceCurrentMaxSvpcVpi at the high ATM interface
+ port."
+ ::= { atmSvcVpCrossConnectEntry 5 }
+
+ atmSvcVpCrossConnectCreationTime OBJECT-TYPE
+ SYNTAX TimeStamp
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of the sysUpTime object
+ at the time this bi-directional SVPC
+ cross-connect was created. If the current
+ state was entered prior to the last
+ re-initialization of the agent, then this
+ object contains a zero value."
+ ::= { atmSvcVpCrossConnectEntry 6 }
+
+ atmSvcVpCrossConnectRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object is used to delete rows in the
+ atmSvcVpCrossConnectTable."
+ ::= { atmSvcVpCrossConnectEntry 7 }
+
+ -- 2. ATM VCL SVC Cross-Connect Table
+
+ atmSvcVcCrossConnectTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AtmSvcVcCrossConnectEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The ATM SVCC Cross-Connect table. A
+ bi-directional VC cross-connect between two
+ switched VCLs is modeled as one entry in
+ this table. A Soft PVCC cross-connect,
+ between a soft permanent VCL and a switched
+ VCL, is also modeled as one entry in this
+ table."
+ ::= { atm2MIBObjects 2 }
+
+ atmSvcVcCrossConnectEntry OBJECT-TYPE
+ SYNTAX AtmSvcVcCrossConnectEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in the ATM SVCC Cross-Connect table.
+ This entry is used to model a bi-directional ATM
+ VC cross-connect between two VCLs."
+ INDEX { atmSvcVcCrossConnectIndex,
+ atmSvcVcCrossConnectLowIfIndex,
+ atmSvcVcCrossConnectLowVpi,
+ atmSvcVcCrossConnectLowVci,
+ atmSvcVcCrossConnectHighIfIndex,
+ atmSvcVcCrossConnectHighVpi,
+ atmSvcVcCrossConnectHighVci }
+ ::= { atmSvcVcCrossConnectTable 1 }
+
+ AtmSvcVcCrossConnectEntry ::= SEQUENCE {
+ atmSvcVcCrossConnectIndex INTEGER,
+ atmSvcVcCrossConnectLowIfIndex InterfaceIndex,
+ atmSvcVcCrossConnectLowVpi AtmVpIdentifier,
+ atmSvcVcCrossConnectLowVci AtmVcIdentifier,
+ atmSvcVcCrossConnectHighIfIndex InterfaceIndex,
+ atmSvcVcCrossConnectHighVpi AtmVpIdentifier,
+ atmSvcVcCrossConnectHighVci AtmVcIdentifier,
+ atmSvcVcCrossConnectCreationTime TimeStamp,
+ atmSvcVcCrossConnectRowStatus RowStatus
+ }
+
+ atmSvcVcCrossConnectIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..2147483647)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A unique value to identify this SVCC cross-connect.
+ For each VP associated with this cross-connect, the
+ agent reports this cross-connect index value in the
+ atmVclCrossConnectIdentifier attribute of the
+ corresponding atmVplTable entries."
+ ::= { atmSvcVcCrossConnectEntry 1 }
+
+ atmSvcVcCrossConnectLowIfIndex OBJECT-TYPE
+ SYNTAX InterfaceIndex
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The value of this object is equal to the
+ ifIndex value of the ATM interface port for this
+ SVCC cross-connect. The term low implies that
+ this ATM interface has the numerically lower
+ ifIndex value than the other ATM interface
+ identified in the same atmSvcVcCrossConnectEntry."
+ ::= { atmSvcVcCrossConnectEntry 2 }
+
+ atmSvcVcCrossConnectLowVpi OBJECT-TYPE
+ SYNTAX AtmVpIdentifier
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The value of this object is equal to the VPI
+ value associated with the SVCC cross-connect
+ at the ATM interface that is identified by
+ atmSvcVcCrossConnectLowIfIndex. The VPI value
+ cannot exceed the number supported by the
+ atmInterfaceCurrentMaxSvccVpi at the low ATM interface
+ port."
+ ::= { atmSvcVcCrossConnectEntry 3 }
+
+ atmSvcVcCrossConnectLowVci OBJECT-TYPE
+ SYNTAX AtmVcIdentifier
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The value of this object is equal to the VCI
+ value associated with the SVCC cross-connect
+ at the ATM interface that is identified by
+ atmSvcVcCrossConnectLowIfIndex. The VCI value
+ cannot exceed the number supported by the
+ atmInterfaceCurrentMaxSvccVci at the low ATM interface
+ port."
+ ::= { atmSvcVcCrossConnectEntry 4 }
+
+ atmSvcVcCrossConnectHighIfIndex OBJECT-TYPE
+ SYNTAX InterfaceIndex
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The value of this object is equal to the
+ ifIndex value for the ATM interface port for
+ this SVCC cross-connect. The term high implies
+ that this ATM interface has the numerically
+ higher ifIndex value than the other ATM interface
+ identified in the same atmSvcVcCrossConnectEntry."
+ ::= { atmSvcVcCrossConnectEntry 5 }
+
+ atmSvcVcCrossConnectHighVpi OBJECT-TYPE
+ SYNTAX AtmVpIdentifier
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The value of this object is equal to the VPI
+ value associated with the SVCC cross-connect
+ at the ATM interface that is identified by
+ atmSvcVcCrossConnectHighIfIndex. The VPI value
+ cannot exceed the number supported by the
+ atmInterfaceCurrentMaxSvccVpi at the high ATM interface
+ port."
+ ::= { atmSvcVcCrossConnectEntry 6 }
+
+ atmSvcVcCrossConnectHighVci OBJECT-TYPE
+ SYNTAX AtmVcIdentifier
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The value of this object is equal to the VCI
+ value associated with the SVCC cross-connect
+ at the ATM interface that is identified by
+ atmSvcVcCrossConnectHighIfIndex. The VCI value
+ cannot exceed the number supported by the
+ atmInterfaceMaxVciBits at the high ATM interface
+ port."
+ ::= { atmSvcVcCrossConnectEntry 7 }
+
+ atmSvcVcCrossConnectCreationTime OBJECT-TYPE
+ SYNTAX TimeStamp
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of the sysUpTime object
+ at the time this bi-directional SVCC
+ cross-connect was created. If the current
+ state was entered prior to the last
+ re-initialization of the agent, then this
+ object contains a zero value."
+ ::= { atmSvcVcCrossConnectEntry 8 }
+
+ atmSvcVcCrossConnectRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object is used to delete rows in the
+ atmSvcVcCrossConnectTable."
+ ::= { atmSvcVcCrossConnectEntry 9 }
+
+
+ -- 3. ATM Interface Signalling Statistics Table --
+
+ atmSigStatTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AtmSigStatEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table contains ATM interface signalling
+ statistics, one entry per ATM signalling
+ interface."
+ ::= { atm2MIBObjects 3 }
+
+ atmSigStatEntry OBJECT-TYPE
+ SYNTAX AtmSigStatEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This list contains signalling statistics variables."
+ INDEX { ifIndex }
+ ::= { atmSigStatTable 1}
+
+ AtmSigStatEntry ::= SEQUENCE {
+ atmSigSSCOPConEvents Counter32,
+ atmSigSSCOPErrdPdus Counter32,
+ atmSigDetectSetupAttempts Counter32,
+ atmSigEmitSetupAttempts Counter32,
+ atmSigDetectUnavailRoutes Counter32,
+ atmSigEmitUnavailRoutes Counter32,
+ atmSigDetectUnavailResrcs Counter32,
+ atmSigEmitUnavailResrcs Counter32,
+ atmSigDetectCldPtyEvents Counter32,
+ atmSigEmitCldPtyEvents Counter32,
+ atmSigDetectMsgErrors Counter32,
+ atmSigEmitMsgErrors Counter32,
+ atmSigDetectClgPtyEvents Counter32,
+ atmSigEmitClgPtyEvents Counter32,
+ atmSigDetectTimerExpireds Counter32,
+ atmSigEmitTimerExpireds Counter32,
+ atmSigDetectRestarts Counter32,
+ atmSigEmitRestarts Counter32,
+ atmSigInEstabls Counter32,
+ atmSigOutEstabls Counter32
+ }
+
+ atmSigSSCOPConEvents OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "SSCOP Connection Events Counter. This counter counts
+ the sum of the following errors:
+
+ 1) SSCOP Connection Disconnect Counter
+
+ The abnormal occurrence of this event is
+ characterized by the expiry of Timer_NO_RESPONSE.
+ (This event is communicated to the layer management
+ with MAA-ERROR code P. See ITU-T Q.2110.)
+
+ 2) SSCOP Connection Initiation Failure
+
+ This condition indicates the inability to establish
+ an SSCOP connection. This event occurs whenever the
+ number of expiries of the connection control timer
+ (Timer_CC) equals or exceeds the MaxCC, or upon
+ receipt of a connection reject message BGREJ PDU.
+ (This event is communicated to layer management with
+ MAA-ERROR code O. See ITU-T Q.2110.)
+
+ 3) SSCOP Connection Re-Establ/Resynch
+
+ This event occurs upon receipt of a BGN PDU or
+ RS PDU."
+ REFERENCE
+ "ITU-T Recommendation Q.2110, Broadband
+ Integrated Services Digital Network
+ (B-ISDN) - ATM Adaptation Layer - Service
+ Specific Connection Oriented Protocol (SSCOP)
+ Specification, July 1994."
+ ::= { atmSigStatEntry 1}
+
+ atmSigSSCOPErrdPdus OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "SSCOP Errored PDUs Counter. This counter counts the
+ sum of the following errors:
+
+ 1) Invalid PDUs.
+ These are defined in SSCOP and consist of PDUs
+ with an incorrect length (MAA-ERROR code U), an
+ undefined PDU type code, or that are not 32-bit
+ aligned.
+
+ 2) PDUs that result in MAA-ERROR codes and are
+ discarded.
+
+ See MAA-ERROR codes A-D, F-M, and Q-T defined in
+ ITU-T Q.2110."
+ REFERENCE
+ "ITU-T Recommendation Q.2110, Broadband
+ Integrated Services Digital Network
+ (B-ISDN) - ATM Adaptation Layer - Service
+ Specific Connection Oriented Protocol (SSCOP)
+ Specification, July 1994."
+ ::= { atmSigStatEntry 2 }
+
+ atmSigDetectSetupAttempts OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Call Setup Attempts Counter. This counter counts
+ the number of call setup attempts (both successful
+ and unsuccessful) detected on this interface."
+ ::= { atmSigStatEntry 3 }
+
+ atmSigEmitSetupAttempts OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Call Setup Attempts Counter. This counter counts
+ the number of call setup attempts (both successful
+ and unsuccessful) transmitted on this interface."
+ ::= { atmSigStatEntry 4 }
+
+ atmSigDetectUnavailRoutes OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of Route Unavailability detected on this interface.
+ This counter is incremented when a RELEASE, RELEASE COMPLETE
+ (only when not preceded by a RELEASE message for the same
+ call), ADD PARTY REJECT, or STATUS message that
+ contains one of the following cause code values is
+ received (Note: These cause values
+ apply to both UNI3.0 and UNI3.1):
+
+ Cause Value Meaning
+ 1 unallocated (unassigned) number
+ 2 no route to specified transit network
+ 3 no route to destination
+
+ NOTE: For this counter, RELEASE COMPLETE
+ messages that are a reply to a previous RELEASE
+ message and contain the same cause value, are
+ redundant (for counting purposes) and should not
+ be counted."
+
+ ::= { atmSigStatEntry 5 }
+
+ atmSigEmitUnavailRoutes OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of Route Unavailability transmitted from this
+ interface. This counter is incremented when a RELEASE,
+ RELEASE COMPLETE (only when not preceded by a RELEASE
+ message for the same call), ADD PARTY REJECT, or
+ STATUS message that contains one of the following cause
+ code values is transmitted (Note: These cause values apply
+ to both UNI3.0 and UNI3.1):
+
+ Cause Value Meaning
+
+ 1 unallocated (unassigned) number
+ 2 no route to specified transit network
+ 3 no route to destination
+
+ NOTE: For this counter, RELEASE COMPLETE
+ messages that are a reply to a previous RELEASE
+ message and contain the same cause value, are
+ redundant (for counting purposes) and should not
+ be counted."
+ ::= { atmSigStatEntry 6 }
+
+ atmSigDetectUnavailResrcs OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of Resource Unavailability detected on this
+ interface. This counter is incremented when a RELEASE,
+ RELEASE COMPLETE (only when not preceded by a RELEASE
+ message for the same call), ADD PARTY REJECT, or
+ STATUS message that contains one of the following
+ cause code values is received (Note: These cause
+ values apply to both UNI3.0 and UNI3.1 unless
+ otherwise stated):
+
+ Cause Value Meaning
+
+ 35 requested VPCI/VCI not available
+ 37 user cell rate not available (UNI3.1
+ only)
+ 38 network out of order
+ 41 temporary failure
+ 45 no VPCI/VCI available
+ 47 resource unavailable, unspecified
+ 49 Quality of Service unavailable
+ 51 user cell rate not available (UNI3.0
+ only)
+ 58 bearer capability not presently
+ available
+ 63 Service or option not available,
+ unspecified
+ 92 too many pending add party requests
+
+ NOTE: For this counter, RELEASE COMPLETE
+ messages that are a reply to a previous RELEASE
+ message and contain the same cause value, are
+ redundant (for counting purposes) and should not
+ be counted."
+ ::= { atmSigStatEntry 7 }
+
+ atmSigEmitUnavailResrcs OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of Resource Unavailability transmitted from this
+ interface. This counter is incremented when a RELEASE,
+ RELEASE COMPLETE (only when not preceded by a RELEASE message
+ for the same call), ADD PARTY REJECT, or STATUS message that
+ contains one of the following cause code values is transmitted
+ (Note: These cause values apply to both UNI3.0 and UNI3.1
+ unless otherwise stated):
+
+ Cause Value Meaning
+
+ 35 requested VPCI/VCI not available
+ 37 user cell rate not available (UNI3.1
+ only)
+ 38 network out of order
+ 41 temporary failure
+ 45 no VPCI/VCI available
+ 47 resource unavailable, unspecified
+ 49 Quality of Service unavailable
+ 51 user cell rate not available (UNI3.0
+ only)
+ 58 bearer capability not presently
+ available
+ 63 Service or option not available,
+ unspecified
+ 92 too many pending add party requests
+
+ NOTE: For this counter, RELEASE COMPLETE messages that are a
+ reply to a previous RELEASE message and contain the same cause
+ value, are redundant (for counting purposes) and should not be
+ counted."
+
+ ::= { atmSigStatEntry 8 }
+
+ atmSigDetectCldPtyEvents OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of Called Party Responsible For Unsuccessful Call
+ detected on this interface. This counter is incremented when a
+ RELEASE, RELEASE COMPLETE (only when not preceded by a RELEASE
+ message for the same call), ADD PARTY REJECT, or STATUS message
+ that contains one of the following cause code values is
+ received (Note: These cause values apply to both UNI3.0 and
+ UNI3.1):
+
+ Cause Value Meaning
+
+ 17 user busy
+ 18 no user responding
+ 21 call rejected
+ 22 number changed
+ 23 user rejects all calls with calling
+ line identification restriction (CLIR)
+ 27 destination out of order
+ 31 normal, unspecified
+ 88 incompatible destination
+
+ NOTE: For this counter, RELEASE COMPLETE messages that are a
+ reply to a previous RELEASE message and contain the same cause
+ value, are redundant (for counting purposes) and should not be
+ counted.
+
+ Note: Cause Value #30 'response to STATUS ENQUIRY' was not
+ included in this memo since it did not apply to a hard
+ failure."
+
+ ::= { atmSigStatEntry 9 }
+
+ atmSigEmitCldPtyEvents OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+
+ "Number of Called Party Responsible For Unsuccessful Call
+ transmitted from this interface. This counter is incremented
+ when a RELEASE, RELEASE COMPLETE (only when not preceded by a
+ RELEASE message for the same call), ADD PARTY REJECT, or STATUS
+ message that contains one of the following cause code values is
+ transmitted (Note: These cause values apply to both UNI3.0 and
+ UNI3.1):
+
+ Cause Value Meaning
+
+ 17 user busy
+ 18 no user responding
+ 21 call rejected
+ 22 number changed
+ 23 user rejects all calls with calling
+ line identification restriction (CLIR)
+ 27 destination out of order
+ 31 normal, unspecified
+ 88 incompatible destination
+
+ NOTE: For this counter, RELEASE COMPLETE messages that are a
+ reply to a previous RELEASE message and contain the same cause
+ value, are redundant (for counting purposes) and should not be
+ counted.
+
+ Note: Cause Value #30 'response to STATUS ENQUIRY' was not
+ included in this memo since it did not apply to a hard failure."
+
+ ::= { atmSigStatEntry 10 }
+
+atmSigDetectMsgErrors OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of Incorrect Messages detected on this interface. The
+ Incorrect Messages Counter reflects any sort of incorrect
+ information in a message. This includes:
+
+ - RELEASE, RELEASE COMPLETE, ADD PARTY REJECT,
+ and STATUS messages transmitted, that contain any of
+ the Cause values listed below.
+
+ - Ignored messages. These messages are dropped
+ because the message was so damaged that it could
+ not be further processed. A list of dropped
+ messages is compiled below:
+
+ 1. Message with invalid protocol discriminator
+
+ 2. Message with errors in the call reference I.E.
+ - Bits 5-8 of the first octet not equal to
+ '0000'
+ - Bits 1-4 of the first octet indicating a
+ length other than 3 octets
+ - RELEASE COMPLETE message received with a
+ call reference that does not relate to a
+ call active or in progress
+ - SETUP message received with call reference
+ flag incorrectly set to 1
+ - SETUP message received with a call
+ reference for a call that is already
+ active or in progress.
+
+ 3. Message too short
+
+ The following cause values are monitored by this counter (Note:
+ These cause values apply to both UNI3.0 and UNI3.1 unless
+ otherwise stated):
+
+ Cause Value Meaning
+
+ 10 VPCI/VCI unacceptable (UNI3.0 only)
+ 36 VPCI/VCI assignment failure (UNI3.1 only)
+ 81 invalid call reference value
+ 82 identified channel does not exist
+ 89 invalid endpoint reference
+ 96 mandatory information element is missing
+ 97 message type non-existent or not
+ implemented
+ 99 information element non-existent or not
+ implemented
+ 100 invalid information element contents
+ 101 message not compatible with call state
+ 104 incorrect message length
+ 111 protocol error, unspecified
+
+ NOTE: For this counter, RELEASE COMPLETE messages that are
+ a reply to a previous RELEASE message and contain the same
+ cause value, are redundant (for counting purposes) and
+ should not be counted."
+
+ ::= { atmSigStatEntry 11 }
+
+atmSigEmitMsgErrors OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of Incorrect Messages transmitted on this interface.
+ The Incorrect Messages Counter reflects any sort of incorrect
+ information in a message. This includes:
+
+ - RELEASE, RELEASE COMPLETE, ADD PARTY REJECT,
+ and STATUS messages transmitted or
+ received, that contain any of the Cause values
+ listed below.
+
+ - Ignored messages. These messages are dropped
+ because the message was so damaged that it could
+ not be further processed. A list of dropped
+ messages is compiled below:
+
+ 1. Message with invalid protocol discriminator
+
+ 2. Message with errors in the call reference I.E.
+ - Bits 5-8 of the first octet not equal to
+ '0000'
+ - Bits 1-4 of the first octet indicating a
+ length other than 3 octets
+ - RELEASE COMPLETE message received with a
+ call reference that does not relate to a
+ call active or in progress
+ - SETUP message received with call reference
+ flag incorrectly set to 1
+ - SETUP message received with a call
+ reference for a call that is already
+ active or in progress.
+
+ 3. Message too short
+
+ The following cause values are monitored by this counter
+ (Note: These cause values apply to both UNI3.0 and UNI3.1
+ unless otherwise stated):
+
+ Cause Value Meaning
+
+ 10 VPCI/VCI unacceptable (UNI3.0 only)
+ 36 VPCI/VCI assignment failure (UNI3.1 only)
+ 81 invalid call reference value
+ 82 identified channel does not exist
+ 89 invalid endpoint reference
+ 96 mandatory information element is missing
+ 97 message type non-existent or not
+ implemented
+ 99 information element non-existent or not
+ implemented
+ 100 invalid information element contents
+ 101 message not compatible with call state
+ 104 incorrect message length
+ 111 protocol error, unspecified
+
+ NOTE: For this counter, RELEASE COMPLETE messages that are
+ a reply to a previous RELEASE message and contain the same
+ cause value, are redundant (for counting purposes) and
+ should not be counted."
+
+ ::= { atmSigStatEntry 12 }
+
+atmSigDetectClgPtyEvents OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of Calling Party Events detected on this interface.
+ This counter monitors error events that occur due to the
+ originating user doing something wrong. This counter is
+ incremented when a RELEASE, RELEASE COMPLETE (only when not
+ preceded by a RELEASE message for the same call), ADD PARTY
+ REJECT, or STATUS message that contains one of the following
+ cause code values is received (Note: These cause values
+ apply to both UNI3.0 and UNI3.1):
+
+ Cause Value Meaning
+
+ 28 invalid number format (address incomplete)
+ 43 access information discarded
+ 57 bearer capability not authorized
+ 65 bearer capability not implemented
+ 73 unsupported combination of traffic
+ parameters
+ 78 AAL parameters cannot be supported (UNI3.1
+ only)
+ 91 invalid transit network selection
+ 93 AAL parameters cannot be supported (UNI3.0
+ only)
+
+ NOTE: For this counter, RELEASE COMPLETE messages that
+ are a reply to a previous RELEASE message and contain
+ the same cause value, are redundant (for counting purposes)
+ and should not be counted."
+
+ ::= { atmSigStatEntry 13 }
+
+atmSigEmitClgPtyEvents OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of Calling Party Events transmitted from this interface.
+ This counter monitors error events that occur due to the
+ originating user doing something wrong. This counter is
+ incremented when a RELEASE, RELEASE COMPLETE (only when not
+ preceded by a RELEASE message for the same call), ADD PARTY
+ REJECT, or STATUS message that contains one of the following
+ cause code values is transmitted (Note: These cause values
+ apply to both UNI3.0 and UNI3.1):
+
+ Cause Value Meaning
+
+ 28 invalid number format (address incomplete)
+ 43 access information discarded
+ 57 bearer capability not authorized
+ 65 bearer capability not implemented
+ 73 unsupported combination of traffic
+ parameters
+ 78 AAL parameters cannot be supported (UNI3.1
+ only)
+ 91 invalid transit network selection
+ 93 AAL parameters cannot be supported (UNI3.0
+ only)
+
+ NOTE: For this counter, RELEASE COMPLETE messages that are
+ a reply to a previous RELEASE message and contain the same
+ cause value, are redundant (for counting purposes) and
+ should not be counted."
+ ::= { atmSigStatEntry 14 }
+
+atmSigDetectTimerExpireds OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of Timer Expiries detected on this interface. The Timer
+ Expiries Counter provides a count of network timer expiries, and
+ to some extent, host or switch timer expiries. The conditions
+ for incrementing this counter are:
+
+ - Expiry of any network timer
+
+ - Receipt of a RELEASE or RELEASE COMPLETE
+ message with Cause #102, 'recovery on
+ timer expiry'.
+
+ NOTE: For this counter, RELEASE COMPLETE messages that are
+ a reply to a previous RELEASE message and contain the same
+ cause value, are redundant (for counting purposes) and
+ should not be counted."
+
+ ::= { atmSigStatEntry 15 }
+
+atmSigEmitTimerExpireds OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of Timer Expiries transmitted from this interface.
+ The Timer Expiries Counter provides a count of network timer
+ expiries, and to some extent, host or switch timer expiries.
+ The conditions for incrementing this counter are:
+
+ - Expiry of any network timer
+
+ - Receipt of a RELEASE or RELEASE COMPLETE
+ message with Cause #102, 'recovery on
+ timer expiry'.
+
+ NOTE: For this counter, RELEASE COMPLETE messages that are a
+ reply to a previous RELEASE message and contain the same cause
+ value, are redundant (for counting purposes) and should not be
+ counted."
+
+ ::= { atmSigStatEntry 16 }
+
+atmSigDetectRestarts OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of Restart Activity errors detected on this interface.
+ The Restart Activity Counter provides a count of host, switch,
+ or network restart activity. This counter is incremented when
+ receiving a RESTART message."
+
+ ::= { atmSigStatEntry 17 }
+
+atmSigEmitRestarts OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of Restart Activity errors transmitted from this
+ interface. The Restart Activity Counter provides a count of
+ host, switch, or network restart activity. This counter is
+ incremented when transmitting a RESTART message."
+
+ ::= { atmSigStatEntry 18 }
+
+atmSigInEstabls OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of SVCs established at this signalling entity for
+ incoming connections."
+ ::= { atmSigStatEntry 19 }
+
+atmSigOutEstabls OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of SVCs established at this signalling entity for
+ outgoing connections."
+ ::= { atmSigStatEntry 20 }
+
+ -- 4. ATM Interface Signalling Support Table
+ --
+ -- This table provides information to support
+ -- the signalling process which is used to establish
+ -- ATM Switched Virtual Connections (SVCs).
+atmSigSupportTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AtmSigSupportEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table contains ATM local interface configuration
+ parameters, one entry per ATM signalling interface."
+ ::= { atm2MIBObjects 4 }
+
+atmSigSupportEntry OBJECT-TYPE
+ SYNTAX AtmSigSupportEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This list contains signalling configuration parameters
+ and state variables."
+ INDEX { ifIndex }
+ ::= { atmSigSupportTable 1}
+
+AtmSigSupportEntry ::= SEQUENCE {
+ atmSigSupportClgPtyNumDel INTEGER,
+ atmSigSupportClgPtySubAddr INTEGER,
+ atmSigSupportCldPtySubAddr INTEGER,
+ atmSigSupportHiLyrInfo INTEGER,
+ atmSigSupportLoLyrInfo INTEGER,
+ atmSigSupportBlliRepeatInd INTEGER,
+ atmSigSupportAALInfo INTEGER,
+ atmSigSupportPrefCarrier OCTET STRING
+}
+
+atmSigSupportClgPtyNumDel OBJECT-TYPE
+ SYNTAX INTEGER { enabled(1), disabled(2) }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object indicates whether the Calling Party Number
+ Information Element is transferred to the called party
+ address. The value of this object can be:
+
+ - enabled(1) This Information Element is transferred
+ to the called party
+
+ - disabled(2) This Information Element is NOT
+ transferred to the called party."
+
+ ::= { atmSigSupportEntry 1 }
+
+atmSigSupportClgPtySubAddr OBJECT-TYPE
+ SYNTAX INTEGER { enabled(1), disabled(2) }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object indicates whether to accept and transfer the Calling
+ Party Subaddress Information Element from the calling party to
+ the called party. Calling party subaddress information shall
+ only be transferred to the called party if calling party number
+ delivery is enabled (i.e., atmSigSupportClgPtyNumDel =
+ 'enabled(1)'. The value of this object can be:
+
+ - enabled(1) This Information Element is transferred
+ to the called party
+
+ - disabled(2) This Information Element is NOT
+ transferred to the called party."
+
+ ::= { atmSigSupportEntry 2 }
+
+atmSigSupportCldPtySubAddr OBJECT-TYPE
+ SYNTAX INTEGER { enabled(1), disabled(2) }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object indicates whether to accept, transfer, and deliver
+ the Called Party Subaddress Information Element from the calling
+ party to the called party. The value of this object can be:
+
+ - enabled(1) This Information Element is transferred
+ to the called party
+
+ - disabled(2) This Information Element is NOT
+ transferred to the called party."
+
+ ::= { atmSigSupportEntry 3 }
+
+atmSigSupportHiLyrInfo OBJECT-TYPE
+ SYNTAX INTEGER { enabled(1), disabled(2) }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object indicates whether to accept, transfer, and deliver
+ the Broadband High Layer Information Element from the calling
+ party to the called party. The value of this object can be:
+
+ - enabled(1) This Information Element is transferred
+ to the called party
+ - disabled(2) This Information Element is NOT
+ transferred to the called party."
+
+ ::= { atmSigSupportEntry 4 }
+
+atmSigSupportLoLyrInfo OBJECT-TYPE
+ SYNTAX INTEGER { enabled(1), disabled(2) }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object indicates whether to accept, transfer, and deliver
+ the Broadband Low Layer Information Element from the calling
+ party to the called party. The value of this object can be:
+
+ - enabled(1) This Information Element is transferred
+ to the called party
+
+ - disabled(2) This Information Element is NOT
+ transferred to the called party."
+
+ ::= { atmSigSupportEntry 5 }
+
+atmSigSupportBlliRepeatInd OBJECT-TYPE
+ SYNTAX INTEGER { enabled(1), disabled(2) }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object indicates whether to accept, transfer, and deliver
+ the Broadband Repeat Indicator with two or three instances of
+ the Broadband Low Layer Information Element for low layer
+ information selection from the calling party to the called
+ party. This object's value should always be disabled(2) if
+ the value of atmSigSupportLolyrInfo is disabled(2).
+
+ The value of this object can be:
+
+ - enabled(1) This Information Element is transferred
+ to the called party
+
+ - disabled(2) This Information Element is NOT
+ transferred to the called party."
+ ::= { atmSigSupportEntry 6 }
+
+atmSigSupportAALInfo OBJECT-TYPE
+ SYNTAX INTEGER { enabled(1), disabled(2) }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object indicates whether to accept, transfer, and deliver
+ the ATM Adaptation Layer Parameters Information Element from the
+ calling party to the called party. The value of this object can
+ be:
+
+ - enabled(1) This Information Element is transferred
+ to the called party
+
+ - disabled(2) This Information Element is NOT
+ transferred to the called party."
+
+ ::= { atmSigSupportEntry 7 }
+
+atmSigSupportPrefCarrier OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0|4))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This parameter identifies the carrier to which intercarrier
+ calls originated from this interface are routed when transit
+ network selection information is not provided by the calling
+ party. If a Carrier Identification Code (CIC) is used the
+ parameter shall contain the CIC. For three-digit CICs, the first
+ octet shall be '0' and the CIC is contained in the three
+ following octets. If the preferred carrier feature is not
+ supported the value is a zero-length string."
+
+ ::= { atmSigSupportEntry 8 }
+
+ -- 5. ATM Signalling Descriptor Parameter Table
+
+ atmSigDescrParamTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AtmSigDescrParamEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table contains signalling capabilities of VCLs except the
+ Traffic Descriptor. Traffic descriptors are described in
+ the atmTrafficDescrParamTable."
+
+ REFERENCE
+ "ATM User-Network Interface Specification, Version 3.1 (UNI
+ 3.1), September 1994, Section 5.4.5 Variable Length
+ Information Elements."
+
+ ::= { atm2MIBObjects 5 }
+
+ atmSigDescrParamEntry OBJECT-TYPE
+ SYNTAX AtmSigDescrParamEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Each entry in this table represents a
+ set of signalling capabilities that can
+ be applied to a VCL. There is no requirement
+ for unique entries, except that the index must
+ be unique."
+ INDEX { atmSigDescrParamIndex }
+ ::= { atmSigDescrParamTable 1 }
+
+ AtmSigDescrParamEntry ::=
+ SEQUENCE {
+ atmSigDescrParamIndex
+ AtmSigDescrParamIndex,
+ atmSigDescrParamAalType INTEGER,
+ atmSigDescrParamAalSscsType INTEGER,
+ atmSigDescrParamBhliType INTEGER,
+
+ atmSigDescrParamBhliInfo OCTET STRING,
+ atmSigDescrParamBbcConnConf INTEGER,
+ atmSigDescrParamBlliLayer2 INTEGER,
+ atmSigDescrParamBlliLayer3 INTEGER,
+ atmSigDescrParamBlliPktSize INTEGER,
+ atmSigDescrParamBlliSnapId INTEGER,
+ atmSigDescrParamBlliOuiPid OCTET STRING,
+ atmSigDescrParamRowStatus RowStatus
+ }
+
+ atmSigDescrParamIndex OBJECT-TYPE
+ SYNTAX AtmSigDescrParamIndex
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The value of this object is used by the
+ atmVclGenSigDescrIndex object in the atmVclGenTable to
+ identify a row in this table."
+
+ ::= { atmSigDescrParamEntry 1 }
+
+ atmSigDescrParamAalType OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(1), -- not defined
+ aal1(2), -- AAL type 1
+ aal34(3), -- AAL type 3/4
+ aal5(4), -- AAL type 5
+ userDefined(5), -- User-Defined AAL
+ aal2(6) -- AAL type 2
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The AAL type. The value of this object is set to other(1)
+ when not defined."
+
+ DEFVAL { other }
+ ::= { atmSigDescrParamEntry 2 }
+
+ atmSigDescrParamAalSscsType OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(1), -- other, or not used
+ assured(2), -- Data SSCS based on SSCOP
+ -- assured operation
+ nonassured(3), -- Data SSCS based on SSCOP
+ -- non-assured operation
+ frameRelay(4), -- frame relay SSCS
+ null(5) -- null
+
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The SSCS type used by this entry."
+
+ DEFVAL { other }
+ ::= { atmSigDescrParamEntry 3 }
+
+ atmSigDescrParamBhliType OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(1), -- not defined
+ iso(2), -- ISO
+ user(3), -- User specific
+ hiProfile(4), -- Higher layer profile
+ -- this enum applicable to
+ -- UNI 3.0 only
+ vendorSpecific(5) -- Vender specific
+ -- application identifier
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The Broadband high layer type."
+
+ DEFVAL { other }
+ ::= { atmSigDescrParamEntry 4 }
+
+ atmSigDescrParamBhliInfo OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..8))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The Broadband high layer information. When
+ atmSigDescrParamBhliType is set to iso(2), the value of this
+ object is a zero length string. When
+ atmSigDescrParamBhliType is set to user(3), the value of
+ this object is an octet string with length ranging from 0 to
+ 8. When atmSigDescrParamBhliType is set to hiProfile(4),
+ the value of this object is a length of 4 octet string
+ containing user to user profile identifier. When
+ atmSigDescrParamBhliType is set to vendorSpecific(5), the
+ value of this object is a length of 7 octet string, where
+ the most significant 3 octets consist of a globally-
+ administered OUI, and the least significant 4 octets are the
+ vender administered application OUI."
+
+ DEFVAL { ''H }
+
+ ::= { atmSigDescrParamEntry 5 }
+
+ atmSigDescrParamBbcConnConf OBJECT-TYPE
+ SYNTAX INTEGER {
+ ptp(1), -- point-to-point
+ ptmp(2) -- point-to-multipoint
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The Broadband bearer capability user plane connection
+ configuration parameter."
+ DEFVAL { ptp }
+ ::= { atmSigDescrParamEntry 6 }
+
+ atmSigDescrParamBlliLayer2 OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(1), -- not specified
+ iso1745(2), -- Basic mode ISO 1745
+ q921(3), -- CCITT Recommendation Q.921
+ x25linklayer(4), -- CCITT Recommendation X.25
+ -- Link Layer
+ x25multilink(5), -- CCITT Recommendation X.25
+ -- Multilink
+ lapb(6), -- Extended LAPB; for half
+ -- duplex operation
+ hdlcArm(7), -- HDLC ARM (ISO 4335)
+ hdlcNrm(8), -- HDLC NRM (ISO 4335)
+ hdlcAbm(9), -- HDLC ABM (ISO 4335)
+ iso88022(10), -- LAN logical link control
+ -- (ISO 8802/2)
+ x75slp(11), -- CCITT Recommendation X.75,
+ -- single link
+ -- procedure (SLP)
+ q922(12), -- CCITT Recommendation Q.922
+ userDef(13), -- User specified
+ iso7776(14) -- ISO 7776 DTE-DTE operation
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The Broadband low layer information, protocol type of layer
+ 2. The value of this object is other(1) if layer 2 protocol
+ is not used."
+
+ DEFVAL { other }
+ ::= { atmSigDescrParamEntry 7 }
+
+ atmSigDescrParamBlliLayer3 OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(1), -- not specified
+ x25pkt(2), -- CCITT Recommendation X.25
+ -- packet layer
+ isoiec8208(3), -- ISO/IEC 8208 (X.25 packet
+ -- level protocol for data
+ -- terminal equipment)
+ x223iso8878(4), -- X.223/ISO 8878
+ isoiec8473(5), -- ISO/IEC 8473 OSI
+ -- connectionless
+ -- mode protocol
+ t70(6), -- CCITT Recommendation T.70
+ -- minimum
+ -- network layer
+ tr9577(7), -- ISO/IEC TR 9577 Protocol
+ -- Identification in the
+ -- network layer
+ userDef(8) -- user specified
+
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The Broadband low layer information, protocol type of layer
+ 3. The value of this object is other(1) if layer 3 protocol
+ is not used."
+
+ DEFVAL { other }
+ ::= { atmSigDescrParamEntry 8 }
+
+ atmSigDescrParamBlliPktSize OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(1), -- not used
+ s16(2), -- 16 octets
+ s32(3), -- 32 octets
+ s64(4), -- 64 octets
+ s128(5), -- 128 octets
+ s256(6), -- 256 octets
+ s512(7), -- 512 octets
+ s1024(8), -- 1028 octets
+ s2048(9), -- 2048 octets
+ s4096(10) -- 4096 octets
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The default packet size defined in B-LLI."
+
+ DEFVAL { other }
+ ::= { atmSigDescrParamEntry 9 }
+
+ atmSigDescrParamBlliSnapId OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(1), -- not used
+ true(2), -- SNAP ID is 1
+ false(3) -- SNAP ID is 0
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The SNAP ID used for Broadband low layer protocol layer 3.
+ The value of this object is other(1) if
+ atmSigDescrParamBlliLayer3 is set to other(1)."
+
+ DEFVAL { other }
+ ::= { atmSigDescrParamEntry 10 }
+
+ atmSigDescrParamBlliOuiPid OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0|5))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The OUI/PID encoding for Broadband low layer protocol layer
+ 3. The value of this object is a zero length string if
+ atmSigDescrParamBlliLayer3 is set to other(1). When used,
+ it is always 5 octets with the most significant octet as the
+ OUI Octet 1 and the least significant octet as the PID Octet
+ 2."
+
+ DEFVAL { ''H }
+ ::= { atmSigDescrParamEntry 11 }
+
+ atmSigDescrParamRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object is used to create and delete rows in the
+ atmSigDescrParamTable."
+
+ ::= { atmSigDescrParamEntry 12 }
+
+ -- 6. ATM Interface Registered Address Table --
+
+atmIfRegisteredAddrTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AtmIfRegisteredAddrEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table contains a list of ATM addresses that can be used for
+ calls to and from a given interface by a switch or service. The
+ ATM addresses are either registered by the endsystem via ILMI or
+ statically configured. This table does not expose PNNI
+ reachability information. ILMI registered addresses cannot be
+ deleted using this table. This table only applies to switches
+ and network services."
+ ::= { atm2MIBObjects 6 }
+
+atmIfRegisteredAddrEntry OBJECT-TYPE
+ SYNTAX AtmIfRegisteredAddrEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in the ATM Interface Registered Address table."
+
+ INDEX { ifIndex, atmIfRegAddrAddress }
+ ::= { atmIfRegisteredAddrTable 1}
+
+AtmIfRegisteredAddrEntry ::= SEQUENCE {
+ atmIfRegAddrAddress AtmAddr,
+ atmIfRegAddrAddressSource INTEGER,
+ atmIfRegAddrOrgScope INTEGER,
+ atmIfRegAddrRowStatus RowStatus
+ }
+
+atmIfRegAddrAddress OBJECT-TYPE
+ SYNTAX AtmAddr
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An address registered for a given switch or service interface."
+
+ ::= { atmIfRegisteredAddrEntry 1}
+
+atmIfRegAddrAddressSource OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(1),
+ static(2),
+ dynamic(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The type of address source for a given ATM Address. The value
+ dynamic(3) is indicated when ILMI is used."
+ ::= { atmIfRegisteredAddrEntry 2}
+
+atmIfRegAddrOrgScope OBJECT-TYPE
+ SYNTAX INTEGER {
+ localNetwork(1),
+ localNetworkPlusOne(2),
+ localNetworkPlusTwo(3),
+ siteMinusOne(4),
+ intraSite(5),
+ sitePlusOne(6),
+ organizationMinusOne(7),
+ intraOrganization(8),
+ organizationPlusOne(9),
+ communityMinusOne(10),
+ intraCommunity(11),
+ communityPlusOne(12),
+ regional(13),
+ interRegional(14),
+ global(15)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object indicates the organizational scope for
+ the referenced address. The information of the
+ referenced address shall not be distributed outside
+ the indicated scope. Refer to Annex 5.3 of ATM
+ Forum UNI Signalling 4.0 for guidelines regarding
+ the use of organizational scopes.
+
+ This value cannot be configured for ILMI-registered
+ addresses.
+
+ The default values for organizational scope are
+ localNetwork(1) for ATM group addresses, and
+ global(15) for individual addresses."
+ ::= { atmIfRegisteredAddrEntry 3}
+
+atmIfRegAddrRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object is used to create and delete rows in the
+ atmIfRegisteredAddrTable. Rows created dynamically (e.g., ILMI-
+ registered addresses) cannot be deleted using this object."
+
+ ::= { atmIfRegisteredAddrEntry 4}
+
+ -- 7. ATM VPI/VCI to Address Mapping Table
+
+ atmVclAddrTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AtmVclAddrEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table provides a mapping between the atmVclTable and
+ the ATM called party/calling party address. This table can
+ be used to retrieve the calling party and called party ATM
+ address pair for a given VCL. Note that there can be more
+ than one pair of calling party and called party ATM
+ addresses for a VCL in a point to multi-point call."
+ ::= { atm2MIBObjects 7 }
+
+ atmVclAddrEntry OBJECT-TYPE
+ SYNTAX AtmVclAddrEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Each entry in this table represents a binding between a VCL
+ and an ATM address associated with this call. This ATM
+ address can be either the called party address or the
+ calling party address. There can be more than one pair of
+ calling/called party ATM addresses associated with the VCL
+ entry for point to multi-point calls. Objects
+ atmVclAddrType, and atmVclAddrRowStatus are
+ required during row creation."
+ INDEX { ifIndex, atmVclVpi, atmVclVci,
+ atmVclAddrAddr }
+ ::= { atmVclAddrTable 1 }
+
+ AtmVclAddrEntry ::=
+ SEQUENCE {
+ atmVclAddrAddr AtmAddr,
+ atmVclAddrType INTEGER,
+ atmVclAddrRowStatus RowStatus
+ }
+
+ atmVclAddrAddr OBJECT-TYPE
+ SYNTAX AtmAddr
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An ATM address on one end of the VCL. For SVCs, the agent
+ supplies the value of this object at creation time. For PVC
+ VCL, the manager can supply the value of this object during
+ or after the PVC VCL creation."
+ ::= { atmVclAddrEntry 1 }
+
+ atmVclAddrType OBJECT-TYPE
+ SYNTAX INTEGER {
+ callingParty(1),
+ calledParty(2)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The type of ATM Address represented by the object
+ atmVclAddrAddr. Choices are either the calling party ATM
+ address or the called party ATM address."
+ ::= { atmVclAddrEntry 2 }
+
+ atmVclAddrRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object is used to create or destroy an
+ entry from this table. Note that the manager entity
+ can only destroy the PVC VCLs."
+ ::= { atmVclAddrEntry 3 }
+
+ -- 8. ATM Address to VPI/VCI Mapping Table
+ --
+ -- This table provides an alternative way to access
+ -- a row in the atmVclAddrTable by using
+ -- an ATM address as an index, instead of
+ -- the ifIndex
+
+ atmAddrVclTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AtmAddrVclEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table provides an alternative way to retrieve the
+ atmVclTable. This table can be used to retrieve the
+ indexing to the atmVclTable by an ATM address."
+
+ ::= { atm2MIBObjects 8 }
+
+ atmAddrVclEntry OBJECT-TYPE
+ SYNTAX AtmAddrVclEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Each entry in this table represents an entry in the
+ atmVclTable of the ATM-MIB by its ATM address. The ATM
+ address is either the calling or called party ATM address
+ of the call. Entries in this table are read only.
+ They show up when entries are created in the
+ atmVclAddrTable."
+ REFERENCE
+ "Tesink, K., Editor, Definitions of Managed Objects
+ for ATM Management, RFC 2515, Bell Communications
+ Research, February, 1999."
+ INDEX { atmVclAddrAddr, atmAddrVclAtmIfIndex,
+ atmAddrVclVpi, atmAddrVclVci }
+ ::= { atmAddrVclTable 1 }
+
+ AtmAddrVclEntry ::=
+ SEQUENCE {
+ atmAddrVclAtmIfIndex InterfaceIndex,
+ atmAddrVclVpi AtmVpIdentifier,
+ atmAddrVclVci AtmVcIdentifier,
+ atmAddrVclAddrType INTEGER
+ }
+
+ atmAddrVclAtmIfIndex OBJECT-TYPE
+ SYNTAX InterfaceIndex
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The interface index of the ATM interface to which this
+ VCL pertains. This object combined with the
+ atmAddrVclVpi and atmAddrVclVci objects serves as an
+ index to the atmVclTable."
+ ::= { atmAddrVclEntry 1 }
+
+ atmAddrVclVpi OBJECT-TYPE
+ SYNTAX AtmVpIdentifier
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The VPI value of the VCL. This object combined with the
+ atmAddrVclAtmIfIndex and atmAddrVclVci objects serves as
+ an index to the atmVclTable."
+ ::= { atmAddrVclEntry 2 }
+
+ atmAddrVclVci OBJECT-TYPE
+ SYNTAX AtmVcIdentifier
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The VCI value of the VCL. This object combined with the
+ atmAddrVclAtmIfIndex and atmAddrVclVpi objects serves as
+ an index to the atmVclTable."
+ ::= { atmAddrVclEntry 3 }
+
+ atmAddrVclAddrType OBJECT-TYPE
+ SYNTAX INTEGER {
+ callingParty(1),
+ calledParty(2) }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The type of ATM Address represented by the object
+ atmVclAddrAddr. Choices are either calling party address
+ or called party address."
+ ::= { atmAddrVclEntry 4 }
+
+ -- 9. ATM VPL Statistics Table
+
+ atmVplStatTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AtmVplStatEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table contains all statistics counters per VPL. It is
+ used to monitor the usage of the VPL in terms of incoming
+ cells and outgoing cells."
+ ::= { atm2MIBObjects 9 }
+
+ atmVplStatEntry OBJECT-TYPE
+ SYNTAX AtmVplStatEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Each entry in this table represents a VPL."
+ INDEX { ifIndex, atmVplVpi }
+ ::= { atmVplStatTable 1 }
+
+ AtmVplStatEntry ::=
+ SEQUENCE {
+ atmVplStatTotalCellIns Counter32,
+ atmVplStatClp0CellIns Counter32,
+ atmVplStatTotalDiscards Counter32,
+ atmVplStatClp0Discards Counter32,
+ atmVplStatTotalCellOuts Counter32,
+ atmVplStatClp0CellOuts Counter32,
+ atmVplStatClp0Tagged Counter32
+ }
+
+ atmVplStatTotalCellIns OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of valid ATM cells received by this VPL
+ including both CLP=0 and CLP=1 cells. The cells are
+ counted prior to the application of the traffic policing."
+ ::= { atmVplStatEntry 1 }
+
+ atmVplStatClp0CellIns OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of valid ATM cells received by this VPL with
+ CLP=0. The cells are counted prior to the application of
+ the traffic policing."
+ ::= { atmVplStatEntry 2 }
+
+ atmVplStatTotalDiscards OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of valid ATM cells discarded by the
+ traffic policing entity. This includes cells originally
+ received with CLP=0 and CLP=1."
+ ::= { atmVplStatEntry 3 }
+
+ atmVplStatClp0Discards OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of valid ATM cells received with CLP=0 and
+ discarded by the traffic policing entity."
+ ::= { atmVplStatEntry 4 }
+
+ atmVplStatTotalCellOuts OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of valid ATM cells transmitted by this
+ VPL. This includes both CLP=0 and CLP=1 cells."
+ ::= { atmVplStatEntry 5 }
+
+ atmVplStatClp0CellOuts OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of valid ATM cells transmitted with CLP=0
+ by this VPL."
+ ::= { atmVplStatEntry 6 }
+
+ atmVplStatClp0Tagged OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of valid ATM cells tagged by the traffic
+ policing entity from CLP=0 to CLP=1."
+ ::= { atmVplStatEntry 7 }
+
+ -- 10. ATM Logical Port Configuration Table
+
+ atmVplLogicalPortTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AtmVplLogicalPortEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Indicates whether the VPL is an ATM Logical Port interface
+ (ifType=80)."
+ ::= { atm2MIBObjects 10 }
+
+ atmVplLogicalPortEntry OBJECT-TYPE
+ SYNTAX AtmVplLogicalPortEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry with information about the ATM Logical Port
+ interface."
+ AUGMENTS { atmVplEntry }
+ ::= { atmVplLogicalPortTable 1 }
+
+ AtmVplLogicalPortEntry ::=
+ SEQUENCE {
+ atmVplLogicalPortDef INTEGER,
+ atmVplLogicalPortIndex InterfaceIndexOrZero
+ }
+
+ atmVplLogicalPortDef OBJECT-TYPE
+ SYNTAX INTEGER {
+ notLogicalIf(1),
+ isLogicalIf(2)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Indicates whether the VPC at this VPL interface is an ATM
+ Logical Port interface."
+ DEFVAL { notLogicalIf }
+ ::= { atmVplLogicalPortEntry 1 }
+
+ atmVplLogicalPortIndex OBJECT-TYPE
+ SYNTAX InterfaceIndexOrZero
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The ifTable index of the ATM logical port interface
+ associated with this VPL. The distinguished value of zero
+ indicates that the agent has not (yet) assigned such an
+ ifTable Index. The zero value must be assigned by the agent
+ if the value of atmVplLogicalPortDef is set to notLogicalIf,
+ or if the VPL row is not active."
+ ::= { atmVplLogicalPortEntry 2 }
+
+ -- 11. ATM VCL Statistics Table
+
+ atmVclStatTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AtmVclStatEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table contains all statistics counters per VCL. It is
+ used to monitor the usage of the VCL in terms of incoming
+ cells and outgoing cells."
+ ::= { atm2MIBObjects 11 }
+
+ atmVclStatEntry OBJECT-TYPE
+ SYNTAX AtmVclStatEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Each entry in this table represents a VCL."
+ INDEX { ifIndex, atmVclVpi, atmVclVci }
+ ::= { atmVclStatTable 1 }
+
+ AtmVclStatEntry ::=
+ SEQUENCE {
+ atmVclStatTotalCellIns Counter32,
+ atmVclStatClp0CellIns Counter32,
+ atmVclStatTotalDiscards Counter32,
+ atmVclStatClp0Discards Counter32,
+ atmVclStatTotalCellOuts Counter32,
+ atmVclStatClp0CellOuts Counter32,
+ atmVclStatClp0Tagged Counter32
+ }
+
+ atmVclStatTotalCellIns OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of valid ATM cells received by this VCL
+ including both CLP=0 and CLP=1 cells. The cells are counted
+ prior to the application of the traffic policing."
+ ::= { atmVclStatEntry 1 }
+
+ atmVclStatClp0CellIns OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of valid ATM cells received by this VCL with
+ CLP=0. The cells are counted prior to the application of
+ the traffic policing."
+ ::= { atmVclStatEntry 2 }
+
+ atmVclStatTotalDiscards OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of valid ATM cells discarded by the
+ traffic policing entity. This includes cells originally
+ received with CLP=0 and CLP=1."
+ ::= { atmVclStatEntry 3 }
+
+ atmVclStatClp0Discards OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of valid ATM cells received with CLP=0
+ and discarded by the traffic policing entity."
+ ::= { atmVclStatEntry 4 }
+
+ atmVclStatTotalCellOuts OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of valid ATM cells transmitted by this
+ VCL. This includes both CLP=0 and CLP=1 cells."
+ ::= { atmVclStatEntry 5 }
+
+ atmVclStatClp0CellOuts OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of valid ATM cells transmitted with CLP=0
+ by this VCL."
+ ::= { atmVclStatEntry 6 }
+
+ atmVclStatClp0Tagged OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of valid ATM cells tagged by the traffic
+ policing entity from CLP=0 to CLP=1."
+ ::= { atmVclStatEntry 7 }
+
+ -- 12. ATM AAL5 per-VCC Statistics Table
+
+ atmAal5VclStatTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AtmAal5VclStatEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table provides a collection of objects providing AAL5
+ configuration and performance statistics of a VCL."
+ ::= { atm2MIBObjects 12 }
+
+ atmAal5VclStatEntry OBJECT-TYPE
+ SYNTAX AtmAal5VclStatEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Each entry in this table represents an AAL5 VCL, and
+ is indexed by ifIndex values of AAL5 interfaces and
+ the associated VPI/VCI values."
+ INDEX { ifIndex, atmVclVpi, atmVclVci }
+ ::= { atmAal5VclStatTable 1 }
+
+ AtmAal5VclStatEntry ::=
+ SEQUENCE {
+ atmAal5VclInPkts Counter32,
+ atmAal5VclOutPkts Counter32,
+ atmAal5VclInOctets Counter32,
+ atmAal5VclOutOctets Counter32
+ }
+
+ atmAal5VclInPkts OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of AAL5 CPCS PDUs received on the AAL5 VCC at
+ the interface identified by the ifIndex."
+ ::= { atmAal5VclStatEntry 1 }
+
+ atmAal5VclOutPkts OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of AAL5 CPCS PDUs transmitted on the AAL5 VCC
+ at the interface identified by the ifIndex."
+ ::= { atmAal5VclStatEntry 2 }
+
+ atmAal5VclInOctets OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of octets contained in AAL5 CPCS PDUs received
+ on the AAL5 VCC at the interface identified by the ifIndex."
+ ::= { atmAal5VclStatEntry 3 }
+
+ atmAal5VclOutOctets OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of octets contained in AAL5 CPCS PDUs
+ transmitted on the AAL5 VCC at the interface identified by
+ the ifIndex."
+ ::= { atmAal5VclStatEntry 4 }
+
+ -- 13. ATM VC General Information Table
+
+ atmVclGenTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AtmVclGenEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "General Information for each VC."
+ ::= { atm2MIBObjects 13 }
+
+ atmVclGenEntry OBJECT-TYPE
+ SYNTAX AtmVclGenEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry with general information about the ATM VC."
+
+ AUGMENTS { atmVclEntry }
+ ::= { atmVclGenTable 1 }
+
+ AtmVclGenEntry ::=
+ SEQUENCE {
+ atmVclGenSigDescrIndex AtmSigDescrParamIndex
+ }
+
+ atmVclGenSigDescrIndex OBJECT-TYPE
+ SYNTAX AtmSigDescrParamIndex
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The value of this object identifies the row in the ATM
+ Signalling Descriptor Parameter Table which applies to this
+ VCL."
+ ::= { atmVclGenEntry 1 }
+
+ -- 14. ATM Interface Configuration Extension Table
+
+atmInterfaceExtTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AtmInterfaceExtEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table contains ATM interface configuration and monitoring
+ information not defined in the atmInterfaceConfTable from the
+ ATM-MIB. This includes the type of connection setup procedures,
+ ILMI information, and information on the VPI/VCI range."
+ REFERENCE
+ "Tesink, K., Editor, Definitions of Managed Objects
+ for ATM Management, RFC 2515, Bell Communications
+ Research, February, 1999."
+ ::= { atm2MIBObjects 14 }
+
+atmInterfaceExtEntry OBJECT-TYPE
+ SYNTAX AtmInterfaceExtEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry extends the atmInterfaceConfEntry defined in the ATM-
+ MIB. Each entry corresponds to an ATM interface."
+ REFERENCE
+ "Tesink, K., Editor, Definitions of Managed Objects
+ for ATM Management, RFC 2515, Bell Communications
+ Research, February, 1999."
+ AUGMENTS { atmInterfaceConfEntry }
+ ::= { atmInterfaceExtTable 1 }
+
+AtmInterfaceExtEntry ::= SEQUENCE {
+ atmIntfConfigType AtmInterfaceType,
+ atmIntfActualType AtmInterfaceType,
+ atmIntfConfigSide INTEGER,
+ atmIntfActualSide INTEGER,
+ atmIntfIlmiAdminStatus BITS,
+ atmIntfIlmiOperStatus BITS,
+ atmIntfIlmiFsmState INTEGER,
+ atmIntfIlmiEstablishConPollIntvl Integer32,
+ atmIntfIlmiCheckConPollIntvl Integer32,
+ atmIntfIlmiConPollInactFactor Integer32,
+ atmIntfIlmiPublicPrivateIndctr INTEGER,
+ atmInterfaceConfMaxSvpcVpi INTEGER,
+ atmInterfaceCurrentMaxSvpcVpi INTEGER,
+ atmInterfaceConfMaxSvccVpi INTEGER,
+ atmInterfaceCurrentMaxSvccVpi INTEGER,
+ atmInterfaceConfMinSvccVci INTEGER,
+ atmInterfaceCurrentMinSvccVci INTEGER,
+ atmIntfSigVccRxTrafficDescrIndex
+ AtmTrafficDescrParamIndex,
+ atmIntfSigVccTxTrafficDescrIndex
+ AtmTrafficDescrParamIndex,
+ atmIntfPvcFailures Counter32,
+ atmIntfCurrentlyFailingPVpls Gauge32,
+ atmIntfCurrentlyFailingPVcls Gauge32,
+ atmIntfPvcFailuresTrapEnable TruthValue,
+ atmIntfPvcNotificationInterval INTEGER,
+ atmIntfLeafSetupFailures Counter32,
+ atmIntfLeafSetupRequests Counter32 }
+
+atmIntfConfigType OBJECT-TYPE
+ SYNTAX AtmInterfaceType
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The type of connection setup procedures configured for the ATM
+ interface. Setting this variable to a value of 'other' is not
+ allowed."
+ DEFVAL { autoConfig }
+ ::= { atmInterfaceExtEntry 1 }
+
+atmIntfActualType OBJECT-TYPE
+ SYNTAX AtmInterfaceType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The type of connection setup procedures currently being used on
+ the interface. This may reflect a manually configured value for
+ the interface type, or may be determined by other means such as
+ auto-configuration. A value of `autoConfig' indicates that
+ auto-configuration was requested but has not yet been completed."
+ ::= { atmInterfaceExtEntry 2 }
+
+atmIntfConfigSide OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(1),
+ user(2),
+ network(3) }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The configured role of the managed entity as one side of the ATM
+ interface. This value does not apply when the object
+ atmIntfConfigType is set to `autoConfig', `atmfPnni1Dot0', or
+ `atmfBici2Dot0'."
+ ::= { atmInterfaceExtEntry 3 }
+
+atmIntfActualSide OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(1),
+ user(2),
+ network(3),
+ symmetric(4) }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The current role used by the managed entity to represent one
+ side of the ATM interface."
+ ::= { atmInterfaceExtEntry 4 }
+
+atmIntfIlmiAdminStatus OBJECT-TYPE
+ SYNTAX BITS { ilmi(0),
+ ilmiAddressRegistration(1),
+ ilmiConnectivity(2),
+ ilmiPvcPvpMgmt(3),
+ ilmiSigVccParamNegotiation(4) }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Indicates which components of ILMI are administratively enabled
+ on this interface. If the 'ilmi' bit is not set, then no ILMI
+ components are operational. ILMI components other than auto-
+ configuration that are not represented in the value have their
+ administrative status determined according to the 'ilmi' bit.
+ The ILMI auto-configuration component is enabled/disabled by the
+ atmIntfConfigType object."
+ ::= { atmInterfaceExtEntry 5 }
+
+atmIntfIlmiOperStatus OBJECT-TYPE
+ SYNTAX BITS { ilmi(0),
+ ilmiAddressRegistration(1),
+ ilmiConnectivity(2),
+ ilmiPvcPvpMgmt(3),
+ ilmiSigVccParamNegotiation(4) }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates which components of ILMI are operational on this
+ interface."
+ ::= { atmInterfaceExtEntry 6 }
+
+atmIntfIlmiFsmState OBJECT-TYPE
+ SYNTAX INTEGER { stopped(1),
+ linkFailing(2),
+ establishing(3),
+ configuring(4),
+ retrievingNetworkPrefixes(5),
+ registeringNetworkPrefixes(6),
+ retrievingAddresses(7),
+ registeringAddresses(8),
+ verifying(9) }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the state of the ILMI Finite State Machine associated
+ with this interface."
+
+ REFERENCE
+ "ATM Forum, Integrated Local Management Interface
+ (ILMI) Specification, Version 4.0, af-ilmi-0065.000,
+ September 1996, Appendix 1"
+ ::= { atmInterfaceExtEntry 7 }
+
+atmIntfIlmiEstablishConPollIntvl OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ UNITS "seconds"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The amount of time S between successive transmissions of ILMI
+ messages on this interface for the purpose of detecting
+ establishment of ILMI connectivity."
+ REFERENCE
+ "ATM Forum, Integrated Local Management Interface
+ (ILMI) Specification, Version 4.0, af-ilmi-0065.000,
+ September 1996, Section 8.3.1"
+ DEFVAL { 1 }
+ ::= { atmInterfaceExtEntry 8 }
+
+atmIntfIlmiCheckConPollIntvl OBJECT-TYPE
+ SYNTAX Integer32 (0..65535)
+ UNITS "seconds"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The amount of time T between successive transmissions of ILMI
+ messages on this interface for the purpose of detecting loss of
+ ILMI connectivity. The distinguished value zero disables ILMI
+ connectivity procedures on this interface."
+ REFERENCE
+ "ATM Forum, Integrated Local Management Interface
+ (ILMI) Specification, Version 4.0, af-ilmi-0065.000,
+ September 1996, Section 8.3.1"
+ DEFVAL { 5 }
+ ::= { atmInterfaceExtEntry 9 }
+
+atmIntfIlmiConPollInactFactor OBJECT-TYPE
+ SYNTAX Integer32 (0..65535)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The number K of consecutive polls on this interface for which no
+ ILMI response message is received before ILMI connectivity is
+ declared lost."
+ REFERENCE
+ "ATM Forum, Integrated Local Management Interface
+ (ILMI) Specification, Version 4.0, af-ilmi-0065.000,
+ September 1996, Section 8.3.1"
+ DEFVAL { 4 }
+ ::= { atmInterfaceExtEntry 10 }
+
+atmIntfIlmiPublicPrivateIndctr OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(1),
+ public(2),
+ private(3)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Specifies whether this end of the interface is advertised in
+ ILMI as a device of the `public' or `private' type."
+ DEFVAL { private }
+ ::= { atmInterfaceExtEntry 11 }
+
+atmInterfaceConfMaxSvpcVpi OBJECT-TYPE
+ SYNTAX INTEGER (0..4095)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The maximum VPI that the signalling stack on the ATM interface
+ is configured to support for allocation to switched virtual path
+ connections."
+ ::= { atmInterfaceExtEntry 12 }
+
+atmInterfaceCurrentMaxSvpcVpi OBJECT-TYPE
+ SYNTAX INTEGER (0..4095)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The maximum VPI that the signalling stack on the ATM interface
+ may currently allocate to switched virtual path connections.
+ This value is the minimum of atmInterfaceConfMaxSvpcVpi, and the
+ atmInterfaceMaxSvpcVpi of the interface's UNI/NNI peer.
+
+ If the interface does not negotiate with its peer to determine
+ the maximum VPI that can be allocated to SVPCs on the interface,
+ then the value of this object must equal
+ atmInterfaceConfMaxSvpcVpi. "
+ ::= { atmInterfaceExtEntry 13 }
+
+atmInterfaceConfMaxSvccVpi OBJECT-TYPE
+ SYNTAX INTEGER (0..4095)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The maximum VPI that the signalling stack on the ATM interface
+ is configured to support for allocation to switched virtual
+ channel connections."
+ ::= { atmInterfaceExtEntry 14 }
+
+atmInterfaceCurrentMaxSvccVpi OBJECT-TYPE
+ SYNTAX INTEGER (0..4095)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The maximum VPI that the signalling stack on the ATM interface
+ may currently allocate to switched virtual channel connections.
+ This value is the minimum of atmInterfaceConfMaxSvccVpi, and the
+ atmInterfaceConfMaxSvccVpi of the interface's UNI/NNI peer.
+
+ If the interface does not negotiate with its peer to determine
+ the maximum VPI that can be allocated to SVCCs on the interface,
+ then the value of this object must equal
+ atmInterfaceConfMaxSvccVpi."
+ ::= { atmInterfaceExtEntry 15 }
+
+atmInterfaceConfMinSvccVci OBJECT-TYPE
+ SYNTAX INTEGER (0..65535)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The minimum VCI that the signalling stack on the ATM interface
+ is configured to support for allocation to switched virtual
+ channel connections."
+ ::= { atmInterfaceExtEntry 16 }
+
+atmInterfaceCurrentMinSvccVci OBJECT-TYPE
+ SYNTAX INTEGER (0..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The minimum VCI that the signalling stack on the ATM interface
+ may currently allocate to switched virtual channel connections.
+ This value is the maximum of atmInterfaceConfMinSvccVci, and the
+ atmInterfaceConfMinSvccVci of the interface's UNI/NNI peer.
+ If the interface does not negotiate with its peer to determine
+ the minimum VCI that can be allocated to SVCCs on the interface,
+ then the value of this object must equal
+ atmInterfaceConfMinSvccVci."
+ ::= { atmInterfaceExtEntry 17 }
+
+atmIntfSigVccRxTrafficDescrIndex OBJECT-TYPE
+ SYNTAX AtmTrafficDescrParamIndex
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object identifies the row in the atmTrafficDescrParamTable
+ used during ILMI auto-configuration to specify the advertised
+ signalling VCC traffic parameters for the receive direction.
+ The traffic descriptor resulting from ILMI auto-configuration of
+ the signalling VCC is indicated in the atmVclTable."
+ ::= { atmInterfaceExtEntry 18 }
+
+atmIntfSigVccTxTrafficDescrIndex OBJECT-TYPE
+ SYNTAX AtmTrafficDescrParamIndex
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object identifies the row in the atmTrafficDescrParamTable
+ used during ILMI auto-configuration to specify the advertised
+ signalling VCC traffic parameters for the transmit direction.
+ The traffic descriptor resulting from ILMI auto-configuration of
+ the signalling VCC is indicated in the atmVclTable."
+ ::= { atmInterfaceExtEntry 19 }
+
+atmIntfPvcFailures OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of times the operational status of a PVPL or PVCL on
+ this interface has gone down."
+ ::= { atmInterfaceExtEntry 20 }
+
+atmIntfCurrentlyFailingPVpls OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The current number of VPLs on this interface for which there is
+ an active row in the atmVplTable having an atmVplConnKind value
+ of `pvc' and an atmVplOperStatus with a value other than `up'."
+ ::= { atmInterfaceExtEntry 21 }
+
+atmIntfCurrentlyFailingPVcls OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The current number of VCLs on this interface for which there is
+ an active row in the atmVclTable having an atmVclConnKind value
+ of `pvc' and an atmVclOperStatus with a value other than `up'."
+ ::= { atmInterfaceExtEntry 22 }
+
+atmIntfPvcFailuresTrapEnable OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Allows the generation of traps in response to PVCL or PVPL
+ failures on this interface."
+ DEFVAL { false }
+ ::= { atmInterfaceExtEntry 23 }
+
+atmIntfPvcNotificationInterval OBJECT-TYPE
+ SYNTAX INTEGER (1..3600)
+ UNITS "seconds"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The minimum interval between the sending of
+ atmIntfPvcFailuresTrap notifications for this interface."
+ DEFVAL { 30 }
+ ::= { atmInterfaceExtEntry 24 }
+
+atmIntfLeafSetupFailures OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of setup failures. For root, this is the number of
+ rejected setup requests and for leaf, this is the number of setup
+ failure received."
+ ::= { atmInterfaceExtEntry 25 }
+
+atmIntfLeafSetupRequests OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of setup requests. For root, this includes both incoming
+ setup request and root intiated setup requests."
+ ::= { atmInterfaceExtEntry 26 }
+
+ -- 15. ATM ILMI Service Registry Table
+
+atmIlmiSrvcRegTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AtmIlmiSrvcRegEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table contains a list of all the ATM network services known
+ by this device.
+
+ The characteristics of these services are made available through
+ the ILMI, using the ILMI general-purpose service registry MIB.
+ These services may be made available to all ATM interfaces
+ (atmIlmiSrvcRegIndex = 0) or to some specific ATM interfaces only
+ (atmIlmiSrvcRegIndex = ATM interface index)."
+ ::= { atm2MIBObjects 15 }
+
+atmIlmiSrvcRegEntry OBJECT-TYPE
+ SYNTAX AtmIlmiSrvcRegEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Information about a single service provider that is available to
+ the user-side of an adjacent device through the ILMI.
+
+ Implementors need to be aware that if the size of the
+ atmIlmiSrvcRegServiceID exceeds 112 sub-identifiers then OIDs of
+ column instances in this table will have more than 128 sub-
+ identifiers and cannot be accessed using SNMPv1, SNMPv2, or
+ SNMPv3."
+
+ INDEX { atmIlmiSrvcRegIndex,
+ atmIlmiSrvcRegServiceID,
+ atmIlmiSrvcRegAddressIndex }
+ ::= { atmIlmiSrvcRegTable 1 }
+
+AtmIlmiSrvcRegEntry ::= SEQUENCE {
+ atmIlmiSrvcRegIndex InterfaceIndexOrZero,
+ atmIlmiSrvcRegServiceID OBJECT IDENTIFIER,
+ atmIlmiSrvcRegAddressIndex INTEGER,
+ atmIlmiSrvcRegATMAddress AtmAddr,
+ atmIlmiSrvcRegParm1 OCTET STRING,
+ atmIlmiSrvcRegRowStatus RowStatus
+ }
+
+atmIlmiSrvcRegIndex OBJECT-TYPE
+ SYNTAX InterfaceIndexOrZero
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The ATM interface where the service defined in this entry can be
+ made available to an ATM device attached to this interface.
+
+ The value of 0 has a special meaning: when an ATM service is
+ defined in an entry whose atmIlmiSrvcRegIndex is zero, the ATM
+ service is available to ATM devices connected to any ATM
+ interface. (default value(s)).
+
+ When the user-side of an adjacent device queries the content of
+ the ILMI service registry MIB (using the ILMI protocol), the
+ local network-side responds with the ATM services defined in
+ atmIlmiSrvcRegTable entries, provided that these entries are
+ indexed by:
+
+ - the corresponding ifIndex value (atmIlmiSrvcRegIndex
+ equal to the ifIndex of the interface to which the
+ adjacent device is connected) - zero (atmIlmiSrvcRegIndex=0)."
+ ::= { atmIlmiSrvcRegEntry 1 }
+
+atmIlmiSrvcRegServiceID OBJECT-TYPE
+ SYNTAX OBJECT IDENTIFIER
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This is the service identifier which uniquely identifies the
+ type of service at the address provided in the table. The object
+ identifiers for the LAN Emulation Configuration Server (LECS) and
+ the ATM Name Server (ANS) are defined in the ATM Forum ILMI
+ Service Registry MIB. The object identifiers for the ATMARP
+ Server, the Multicast Address Resolution Server (MARS), and the
+ NHRP Server (NHS) are defined in RFC 2601, RFC 2602, and RFC
+ 2603, respectively."
+ ::= { atmIlmiSrvcRegEntry 2 }
+
+atmIlmiSrvcRegAddressIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..2147483647)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An arbitrary integer to differentiate multiple rows containing
+ different ATM addresses for the same service on the same
+ interface. This number need NOT be the same as the corresponding
+ ILMI atmfSrvcRegAddressIndex MIB object."
+ ::= { atmIlmiSrvcRegEntry 3 }
+
+atmIlmiSrvcRegATMAddress OBJECT-TYPE
+ SYNTAX AtmAddr
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This is the full address of the service. The user-side of the
+ adjacent device may use this address to establish a connection
+ with the service."
+ ::= { atmIlmiSrvcRegEntry 4 }
+
+atmIlmiSrvcRegParm1 OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(1..255))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "An octet string used according to the value of
+ atmIlmiSrvcRegServiceID."
+ ::= { atmIlmiSrvcRegEntry 5 }
+
+atmIlmiSrvcRegRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object is used to create or destroy an entry from this
+ table."
+ ::= { atmIlmiSrvcRegEntry 6 }
+
+ -- 16. ILMI Network Prefix Table
+
+atmIlmiNetworkPrefixTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AtmIlmiNetworkPrefixEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table specifying per-interface network prefix(es) supplied by
+ the network side of the UNI during ILMI address registration.
+ When no network prefixes are specified for a particular
+ interface, one or more network prefixes based on the switch
+ address(es) may be used for ILMI address registration."
+ ::= { atm2MIBObjects 16 }
+
+atmIlmiNetworkPrefixEntry OBJECT-TYPE
+ SYNTAX AtmIlmiNetworkPrefixEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Information about a single network prefix supplied by the
+ network side of the UNI during ILMI address registration. Note
+ that the index variable atmIlmiNetPrefixPrefix is a variable-
+ length string, and as such the rule for variable-length strings
+ in section 7.7 of RFC 2578 applies."
+ INDEX { ifIndex,
+ atmIlmiNetPrefixPrefix }
+ ::= { atmIlmiNetworkPrefixTable 1 }
+
+AtmIlmiNetworkPrefixEntry ::=
+ SEQUENCE {
+ atmIlmiNetPrefixPrefix AtmIlmiNetworkPrefix,
+ atmIlmiNetPrefixRowStatus RowStatus
+ }
+
+atmIlmiNetPrefixPrefix OBJECT-TYPE
+ SYNTAX AtmIlmiNetworkPrefix
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The network prefix specified for use in ILMI address
+ registration."
+ ::= { atmIlmiNetworkPrefixEntry 1 }
+
+atmIlmiNetPrefixRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Used to create, delete, activate and de-activate network
+ prefixes used in ILMI address registration."
+
+ ::= { atmIlmiNetworkPrefixEntry 2 }
+
+ -- 17. ATM Switch Address Table
+
+atmSwitchAddressTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AtmSwitchAddressEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table contains one or more ATM endsystem addresses on a
+ per-switch basis. These addresses are used to identify the
+ switch. When no ILMI network prefixes are configured for certain
+ interfaces, network prefixes based on the switch address(es) may
+ be used for ILMI address registration."
+ ::= { atm2MIBObjects 17 }
+
+atmSwitchAddressEntry OBJECT-TYPE
+ SYNTAX AtmSwitchAddressEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in the ATM Switch Address table."
+ INDEX { atmSwitchAddressIndex }
+ ::= { atmSwitchAddressTable 1 }
+
+AtmSwitchAddressEntry ::=
+ SEQUENCE {
+ atmSwitchAddressIndex Integer32,
+ atmSwitchAddressAddress OCTET STRING,
+ atmSwitchAddressRowStatus RowStatus
+ }
+
+atmSwitchAddressIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An arbitrary index used to enumerate the ATM endsystem addresses
+ for this switch."
+ ::= { atmSwitchAddressEntry 1 }
+
+atmSwitchAddressAddress OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(13|20))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "An ATM endsystem address or address prefix used to identify this
+ switch. When no ESI or SEL field is specified, the switch may
+ generate the ESI and SEL fields automatically to obtain a
+ complete 20-byte ATM endsystem address."
+ ::= { atmSwitchAddressEntry 2 }
+
+atmSwitchAddressRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Used to create, delete, activate, and de-activate addresses used
+ to identify this switch."
+ ::= { atmSwitchAddressEntry 3 }
+
+ -- 18. ATM VP Cross-Connect Extension Table
+
+atmVpCrossConnectXTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AtmVpCrossConnectXEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table contains one row per VP Cross-Connect represented in
+ the atmVpCrossConnectTable."
+ ::= { atm2MIBObjects 18 }
+
+atmVpCrossConnectXEntry OBJECT-TYPE
+ SYNTAX AtmVpCrossConnectXEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Information about a particular ATM VP Cross-Connect.
+ Each entry provides an two objects that name the Cross-Connect.
+ One is assigned by the Service User and the other by the Service
+ Provider."
+ AUGMENTS { atmVpCrossConnectEntry }
+ ::= { atmVpCrossConnectXTable 1 }
+
+AtmVpCrossConnectXEntry ::= SEQUENCE {
+ atmVpCrossConnectUserName SnmpAdminString,
+ atmVpCrossConnectProviderName SnmpAdminString
+}
+
+atmVpCrossConnectUserName OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE(0..255))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This is a service user assigned textual representation of a VPC
+ PVC."
+ ::= { atmVpCrossConnectXEntry 1 }
+
+atmVpCrossConnectProviderName OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE(0..255))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This is a system supplied textual representation of VPC PVC. It
+ is assigned by the service provider."
+ ::= { atmVpCrossConnectXEntry 2 }
+
+ -- 19. ATM VC Cross-Connect Extension Table
+
+atmVcCrossConnectXTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AtmVcCrossConnectXEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table contains one row per VC Cross-Connect represented in
+ the atmVcCrossConnectTable."
+ ::= { atm2MIBObjects 19 }
+
+atmVcCrossConnectXEntry OBJECT-TYPE
+ SYNTAX AtmVcCrossConnectXEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Information about a particular ATM VC Cross-Connect.
+ Each entry provides an two objects that name the Cross-Connect.
+ One is assigned by the Service User and the other by the Service
+ Provider."
+ AUGMENTS { atmVcCrossConnectEntry }
+ ::= { atmVcCrossConnectXTable 1 }
+
+AtmVcCrossConnectXEntry ::= SEQUENCE {
+ atmVcCrossConnectUserName SnmpAdminString,
+ atmVcCrossConnectProviderName SnmpAdminString
+}
+
+atmVcCrossConnectUserName OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE(0..255))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This is a service user assigned textual representation of a VCC
+ PVC."
+ ::= { atmVcCrossConnectXEntry 1 }
+
+atmVcCrossConnectProviderName OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE(0..255))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This is a system supplied textual representation of VCC PVC. It
+ is assigned by the service provider."
+ ::= { atmVcCrossConnectXEntry 2 }
+
+ -- 20. Currently Failing PVPL Table
+
+atmCurrentlyFailingPVplTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AtmCurrentlyFailingPVplEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table indicating all VPLs for which there is an active row in
+ the atmVplTable having an atmVplConnKind value of `pvc' and an
+ atmVplOperStatus with a value other than `up'."
+ ::= { atm2MIBObjects 20 }
+
+atmCurrentlyFailingPVplEntry OBJECT-TYPE
+ SYNTAX AtmCurrentlyFailingPVplEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Each entry in this table represents a VPL for which the
+ atmVplRowStatus is `active', the atmVplConnKind is `pvc', and the
+ atmVplOperStatus is other than `up'."
+ INDEX { ifIndex, atmVplVpi }
+ ::= { atmCurrentlyFailingPVplTable 1 }
+
+AtmCurrentlyFailingPVplEntry ::=
+ SEQUENCE {
+ atmCurrentlyFailingPVplTimeStamp TimeStamp
+ }
+
+atmCurrentlyFailingPVplTimeStamp OBJECT-TYPE
+ SYNTAX TimeStamp
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The time at which this PVPL began to fail."
+ ::= { atmCurrentlyFailingPVplEntry 1 }
+
+ -- 21. Currently Failing PVCL Table
+
+atmCurrentlyFailingPVclTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AtmCurrentlyFailingPVclEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table indicating all VCLs for which there is an active row in
+ the atmVclTable having an atmVclConnKind value of `pvc' and an
+ atmVclOperStatus with a value other than `up'."
+ ::= { atm2MIBObjects 21 }
+
+atmCurrentlyFailingPVclEntry OBJECT-TYPE
+ SYNTAX AtmCurrentlyFailingPVclEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Each entry in this table represents a VCL for which the
+ atmVclRowStatus is `active', the atmVclConnKind is `pvc', and the
+ atmVclOperStatus is other than `up'."
+ INDEX { ifIndex, atmVclVpi, atmVclVci }
+ ::= { atmCurrentlyFailingPVclTable 1 }
+
+AtmCurrentlyFailingPVclEntry ::=
+ SEQUENCE {
+ atmCurrentlyFailingPVclTimeStamp TimeStamp
+ }
+
+atmCurrentlyFailingPVclTimeStamp OBJECT-TYPE
+ SYNTAX TimeStamp
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The time at which this PVCL began to fail."
+ ::= { atmCurrentlyFailingPVclEntry 1 }
+
+ -- ATM PVC Traps
+
+ atmPvcTraps OBJECT IDENTIFIER ::= { atm2MIBTraps 1 }
+
+ atmPvcTrapsPrefix OBJECT IDENTIFIER ::= { atmPvcTraps 0 }
+
+ atmIntfPvcFailuresTrap NOTIFICATION-TYPE
+ OBJECTS { ifIndex, atmIntfPvcFailures,
+ atmIntfCurrentlyFailingPVpls,
+ atmIntfCurrentlyFailingPVcls }
+ STATUS current
+ DESCRIPTION
+ "A notification indicating that one or more PVPLs or PVCLs on
+ this interface has failed since the last atmPvcFailuresTrap was
+ sent. If this trap has not been sent for the last
+ atmIntfPvcNotificationInterval, then it will be sent on the next
+ increment of atmIntfPvcFailures."
+ ::= { atmPvcTrapsPrefix 1 }
+
+ -- Conformance Information
+
+atm2MIBConformance OBJECT IDENTIFIER ::= {atm2MIB 3}
+
+atm2MIBGroups OBJECT IDENTIFIER ::= {atm2MIBConformance 1}
+
+atm2MIBCompliances OBJECT IDENTIFIER ::= {atm2MIBConformance 2}
+
+ -- Compliance Statements
+
+atm2MIBCompliance MODULE-COMPLIANCE
+ STATUS current
+ DESCRIPTION
+ "The compliance statement for SNMP entities which represent ATM
+ interfaces. The compliance statements are used to determine
+ if a particular group or object applies to hosts,
+ networks/switches, or both. The Common group is defined as
+ applicable to all three."
+
+ MODULE -- this module
+ MANDATORY-GROUPS { atmCommonGroup }
+
+ -- Objects in the ATM Switch/Service/Host Group
+
+ GROUP atmCommonStatsGroup
+ DESCRIPTION
+ "This group is mandatory for systems that are supporting
+ per-VPC or per-VCC counters."
+
+ OBJECT atmVplLogicalPortDef
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "This object is mandatory for systems support ATM Logical
+ Port interfaces."
+
+ OBJECT atmIntfSigVccRxTrafficDescrIndex
+ DESCRIPTION
+ "This object is mandatory for systems that support negotiation
+ of signalling VCC traffic parameters through ILMI."
+
+ OBJECT atmIntfSigVccTxTrafficDescrIndex
+ DESCRIPTION
+ "This object is mandatory for systems that support negotiation
+ of signalling VCC traffic parameters through ILMI."
+
+ OBJECT atmCurrentlyFailingPVplTimeStamp
+ DESCRIPTION
+ "This object is optional."
+
+ OBJECT atmCurrentlyFailingPVclTimeStamp
+ DESCRIPTION
+ "This object is optional."
+
+ OBJECT atmIntfLeafSetupFailures
+ DESCRIPTION
+ "This object is optional."
+
+ OBJECT atmIntfLeafSetupRequests
+ DESCRIPTION
+ "This object is optional."
+
+ -- Objects in the ATM Switch/Service Group
+
+ GROUP atmSwitchServcGroup
+ DESCRIPTION
+ "This group is mandatory for a Switch/Service that implements
+ ATM interfaces."
+
+ OBJECT atmIfRegAddrRowStatus
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required, and only one of the six
+ enumerated values for the RowStatus textual convention need
+ be supported, specifically: active(1)."
+
+ OBJECT atmSvcVpCrossConnectRowStatus
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required, and only one of the six
+ enumerated values for the RowStatus textual convention need
+ be supported, specifically: active(1)"
+
+ OBJECT atmSvcVcCrossConnectRowStatus
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required, and only one of the six
+ enumerated values for the RowStatus textual convention need
+ be supported, specifically: active(1)"
+
+ -- Objects in the ATM Switch/Service Signalling Group
+
+ GROUP atmSwitchServcSigGroup
+ DESCRIPTION
+ "This group's write access is not required."
+
+ -- Objects in the ATM Switch/Service Notifications Group
+
+ GROUP atmSwitchServcNotifGroup
+ DESCRIPTION
+ "This group is optional for systems implementing support for
+ an ATM Switch or an ATM Network Service."
+
+ -- Objects in the ATM Switch Group
+
+ GROUP atmSwitchGroup
+ DESCRIPTION
+ "This group is optional for a switch that implements ATM
+ interfaces."
+
+ -- Objects in the ATM Service Group
+
+ GROUP atmServcGroup
+ DESCRIPTION
+ "This group is mandatory for systems implementing support for
+ an ATM Network Service."
+
+ -- Objects in the ATM Host Group
+
+ GROUP atmHostGroup
+ DESCRIPTION
+ "This group is mandatory for a Host that implements ATM
+ interfaces."
+
+ OBJECT atmVclAddrType
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required."
+
+ OBJECT atmVclAddrRowStatus
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required, and only one of the six
+ enumerated values for the RowStatus textual convention need
+ be supported, specifically: active(1)."
+
+ -- ATM Host Sig Descriptor Parameter Group
+
+ GROUP atmHostSigDescrGroup
+ DESCRIPTION
+ "This group is mandatory for a Host that implements ATM
+ interfaces. Write access is not required for this group."
+
+ ::= { atm2MIBCompliances 1 }
+
+ -- **********************************************
+
+ -- Units of Conformance
+ -- Mandatory for ATM hosts and switch/service providers
+
+atmCommonGroup OBJECT-GROUP
+
+OBJECTS {
+ atmSigSSCOPConEvents,
+ atmSigSSCOPErrdPdus,
+ atmSigDetectSetupAttempts,
+ atmSigEmitSetupAttempts,
+ atmSigDetectUnavailRoutes,
+ atmSigEmitUnavailRoutes,
+ atmSigDetectUnavailResrcs,
+ atmSigEmitUnavailResrcs,
+ atmSigDetectCldPtyEvents,
+ atmSigEmitCldPtyEvents,
+ atmSigDetectMsgErrors,
+ atmSigEmitMsgErrors,
+ atmSigDetectClgPtyEvents,
+ atmSigEmitClgPtyEvents,
+ atmSigDetectTimerExpireds,
+ atmSigEmitTimerExpireds,
+ atmSigDetectRestarts,
+ atmSigEmitRestarts,
+ atmSigInEstabls,
+ atmSigOutEstabls,
+ atmVplLogicalPortDef,
+ atmVplLogicalPortIndex,
+ atmInterfaceConfMaxSvpcVpi,
+ atmInterfaceCurrentMaxSvpcVpi,
+ atmInterfaceConfMaxSvccVpi,
+ atmInterfaceCurrentMaxSvccVpi,
+ atmInterfaceConfMinSvccVci,
+ atmInterfaceCurrentMinSvccVci,
+ atmIntfSigVccRxTrafficDescrIndex,
+ atmIntfSigVccTxTrafficDescrIndex,
+ atmIntfPvcFailures,
+ atmIntfCurrentlyFailingPVpls,
+ atmIntfCurrentlyFailingPVcls,
+ atmIntfPvcNotificationInterval,
+ atmIntfPvcFailuresTrapEnable,
+ atmIntfLeafSetupFailures,
+ atmIntfLeafSetupRequests,
+ atmIntfConfigType,
+ atmIntfActualType,
+ atmIntfConfigSide,
+ atmIntfActualSide,
+ atmIntfIlmiAdminStatus,
+ atmIntfIlmiOperStatus,
+ atmIntfIlmiFsmState,
+ atmIntfIlmiEstablishConPollIntvl,
+ atmIntfIlmiCheckConPollIntvl,
+ atmIntfIlmiConPollInactFactor,
+ atmIntfIlmiPublicPrivateIndctr,
+ atmCurrentlyFailingPVplTimeStamp,
+ atmCurrentlyFailingPVclTimeStamp
+}
+
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing information
+ for a Switch/Service/Host that implements
+ ATM interfaces."
+ ::= { atm2MIBGroups 1 }
+
+atmCommonStatsGroup OBJECT-GROUP
+
+OBJECTS {
+ atmVclStatTotalCellIns,
+ atmVclStatClp0CellIns,
+ atmVclStatTotalDiscards,
+ atmVclStatClp0Discards,
+ atmVclStatTotalCellOuts,
+ atmVclStatClp0CellOuts,
+ atmVclStatClp0Tagged,
+ atmVplStatTotalCellIns,
+ atmVplStatClp0CellIns,
+ atmVplStatTotalDiscards,
+ atmVplStatClp0Discards,
+ atmVplStatTotalCellOuts,
+ atmVplStatClp0CellOuts,
+ atmVplStatClp0Tagged
+}
+
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing information
+ for a Switch/Service/Host that implements
+ ATM VCL and VPL Statistics"
+ ::= { atm2MIBGroups 2 }
+
+ atmSwitchServcGroup OBJECT-GROUP
+
+ OBJECTS {
+ atmIlmiSrvcRegATMAddress,
+ atmIlmiSrvcRegParm1,
+ atmIlmiSrvcRegRowStatus,
+ atmIlmiNetPrefixRowStatus,
+ atmSvcVpCrossConnectCreationTime,
+ atmSvcVpCrossConnectRowStatus,
+ atmSvcVcCrossConnectCreationTime,
+ atmSvcVcCrossConnectRowStatus,
+ atmIfRegAddrAddressSource,
+ atmIfRegAddrOrgScope,
+ atmIfRegAddrRowStatus}
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing information
+ for a Switch/Service that implements ATM interfaces."
+ ::= { atm2MIBGroups 3 }
+
+ atmSwitchServcSigGroup OBJECT-GROUP
+
+ OBJECTS {
+ atmSigSupportClgPtyNumDel,
+ atmSigSupportClgPtySubAddr,
+ atmSigSupportCldPtySubAddr,
+ atmSigSupportHiLyrInfo,
+ atmSigSupportLoLyrInfo,
+ atmSigSupportBlliRepeatInd,
+ atmSigSupportAALInfo,
+ atmSigSupportPrefCarrier}
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing information
+ for a Switch/Service that implements ATM signalling."
+ ::= { atm2MIBGroups 4 }
+
+ atmSwitchServcNotifGroup NOTIFICATION-GROUP
+
+ NOTIFICATIONS { atmIntfPvcFailuresTrap }
+ STATUS current
+ DESCRIPTION
+ "A collection of notifications providing information
+ for a Switch/Service that implements ATM interfaces."
+ ::= { atm2MIBGroups 5 }
+
+ atmSwitchGroup OBJECT-GROUP
+ OBJECTS {
+ atmSwitchAddressAddress,
+ atmSwitchAddressRowStatus }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing information
+ for an ATM switch."
+ ::= { atm2MIBGroups 6 }
+
+ atmServcGroup OBJECT-GROUP
+
+ OBJECTS {
+ atmVpCrossConnectUserName,
+ atmVpCrossConnectProviderName,
+ atmVcCrossConnectUserName,
+ atmVcCrossConnectProviderName }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing information
+ for an ATM Network Service."
+ ::= { atm2MIBGroups 7 }
+
+ atmHostGroup OBJECT-GROUP
+
+ OBJECTS {
+ atmAal5VclInPkts,
+ atmAal5VclOutPkts,
+ atmAal5VclInOctets,
+ atmAal5VclOutOctets,
+ atmVclAddrType,
+ atmVclAddrRowStatus,
+ atmAddrVclAddrType,
+ atmVclGenSigDescrIndex}
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing information
+ for a Host that implements ATM interfaces."
+ ::= { atm2MIBGroups 8 }
+
+ atmHostSigDescrGroup OBJECT-GROUP
+
+ OBJECTS {
+ atmSigDescrParamAalType,
+ atmSigDescrParamAalSscsType,
+ atmSigDescrParamBhliType,
+ atmSigDescrParamBhliInfo,
+ atmSigDescrParamBbcConnConf,
+ atmSigDescrParamBlliLayer2,
+ atmSigDescrParamBlliLayer3,
+ atmSigDescrParamBlliPktSize,
+ atmSigDescrParamBlliSnapId,
+ atmSigDescrParamBlliOuiPid,
+ atmSigDescrParamRowStatus}
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing information
+ for a Host that implements ATM interfaces."
+ ::= { atm2MIBGroups 9 }
+
+END
generated by cgit v1.2.3 (git 2.46.0) at 2026-02-26 10:04:52 +0000