Initial commitHEADmain

1 files changed, 293 insertions, 0 deletions

diff --git a/MIBS/junos/VPLS-BGP-DRAFT-01-MIB b/MIBS/junos/VPLS-BGP-DRAFT-01-MIB
new file mode 100644
index 0000000..ac04c6f
--- /dev/null
+++ b/MIBS/junos/VPLS-BGP-DRAFT-01-MIB
@@ -0,0 +1,293 @@
+VPLS-BGP-DRAFT-01-MIB DEFINITIONS ::= BEGIN 
+
+      IMPORTS 
+      MODULE-IDENTITY, OBJECT-TYPE,  
+       Unsigned32, transmission  
+         FROM SNMPv2-SMI                    -- RFC2578
+
+      OBJECT-GROUP
+         FROM SNMPv2-CONF                   -- RFC2580 
+
+      RowStatus, StorageType,  TEXTUAL-CONVENTION
+         FROM SNMPv2-TC                     -- RFC2579 
+
+      SnmpAdminString  
+         FROM SNMP-FRAMEWORK-MIB            -- RFC3411
+
+      jnxExperiment
+	FROM JUNIPER-SMI
+
+      jnxVplsConfigIndex, jnxVplsPwBindIndex 
+               FROM VPLS-GENERIC-DRAFT-01-MIB;
+
+   jnxVplsBgpDraft01MIB MODULE-IDENTITY  
+      LAST-UPDATED "200612061200Z"  -- 06 Dec 2006 12:00:00 GMT
+      ORGANIZATION "Layer 2 Virtual Private Networks (L2VPN) 
+                                 Working  Group"  
+      CONTACT-INFO  
+          "  
+           V. J. Shah  
+           Email: vshah@juniper.net  
+
+           The L2VPN Working Group (email distribution l2vpn@ietf.org,  
+           http://www.ietf.org/html.charters/l2vpn-charter.html)  
+           "  
+      DESCRIPTION  
+          "Copyright (C) The IETF Trust (2010). The initial  
+           version of this MIB module was published in RFC XXXX.  
+   -- RFC Editor: Please replace XXXX with RFC number & remove 
+   --                    this note.  
+
+           For full legal notices see the RFC itself or see: 
+           http://www.ietf.org/copyrights/ianamib.html 
+
+           This MIB module contains managed object definitions for   
+           BGP signalled Virtual Private LAN Services as in 
+           [RFC4761]
+
+           This MIB module enables the use of any underlying PseudoWire 
+           network. "  
+
+      -- Revision history.  
+      REVISION  
+          "200612061200Z"  -- 06 Dec 2006 12:00:00 GMT
+      DESCRIPTION "Initial version published as part of RFC YYYY." 
+   -- RFC Editor: please replace YYYY with IANA assigned value, and  
+   -- delete this note.  
+         ::= { jnxExperiment 10 } 
+   -- RFC Editor: please replace XXXX with IANA assigne value, and  
+   -- delete this note.  
+
+   -- VPLS BGP specific Textual Conventions.
+
+   -- JnxVplsBgpRouteDistinguisher ::= TEXTUAL-CONVENTION
+   -- STATUS        current
+   -- DESCRIPTION
+   --      "Syntax for a route distinguisher. For a complete
+   --        definition of a route distinguisher, see [RFC4364].
+   --        For more details on use of a route distinguisher
+   --        for a VPLS service, see [RFC4761]"
+   --   REFERENCE
+   --       "[RFC4364]"
+   --   SYNTAX  OCTET STRING(SIZE (0..256))
+
+   -- JnxVplsBgpRouteTarget ::= TEXTUAL-CONVENTION
+   --   STATUS        current
+   --   DESCRIPTION
+   --       "Syntax for a route target. For a complete
+   --        definition of a route target, see [RFC4364]."
+   --   REFERENCE
+   --       "[RFC4364]"
+   --   SYNTAX  OCTET STRING(SIZE (0..256))    
+
+   -- Top-level components of this MIB.  
+
+   -- Tables, Scalars  
+   jnxVplsBgpObjects       OBJECT IDENTIFIER  
+                                 ::= { jnxVplsBgpDraft01MIB 1 }  
+   -- Conformance  
+   jnxVplsBgpConformance   OBJECT IDENTIFIER   
+                                 ::= { jnxVplsBgpDraft01MIB 2 }  
+
+      -- Vpls Bgp Config Table
+
+      jnxVplsBgpConfigTable OBJECT-TYPE 
+          SYNTAX          SEQUENCE OF JnxVplsBgpConfigEntry 
+          MAX-ACCESS      not-accessible 
+          STATUS          current 
+          DESCRIPTION     
+               "This table specifies information for configuring
+                and monitoring BGP specific parameters for 
+                Virtual Private Lan Services(VPLS)." 
+          ::= { jnxVplsBgpObjects 1 } 
+
+      jnxVplsBgpConfigEntry OBJECT-TYPE 
+          SYNTAX          JnxVplsBgpConfigEntry 
+          MAX-ACCESS      not-accessible 
+          STATUS          current 
+          DESCRIPTION     
+           "A row in this table represents BGP specific information 
+            for Virtual Private Lan Service(VPLS) in a packet network. 
+            It is indexed by jnxVplsConfigIndex, which uniquely 
+            identifies a single instance of a VPLS service.   
+
+            A row is automatically created when a VPLS service is 
+            configured using BGP signalling.
+
+            None of the read-create objects values can be 
+            changed when jnxVplsRowStatus is in the active(1) 
+            state. Changes are allowed when the jnxVplsRowStatus 
+            is in notInService(2) or notReady(3) states only.   
+            If the operator need to change one of the values 
+            for an active row the jnxVplsConfigRowStatus should be 
+            first changed to notInService(2), the objects may 
+            be changed now, and later to active(1) in order to 
+            re-initiate the signaling process with the new 
+            values in effect.  
+            "  
+          INDEX           { jnxVplsConfigIndex } 
+          ::= { jnxVplsBgpConfigTable 1 } 
+
+     JnxVplsBgpConfigEntry ::= 
+        SEQUENCE { 
+         jnxVplsBgpConfigVERangeSize         Unsigned32
+        } 
+
+     jnxVplsBgpConfigVERangeSize   OBJECT-TYPE
+        SYNTAX        Unsigned32 (0..65535)
+        MAX-ACCESS    read-only
+        STATUS        current
+        DESCRIPTION
+            "Specifies the size of the range of VE ids in this 
+             VPLS service. This number controls the size of the 
+             label block advertised for this VE by the PE.  
+             A value of 0 indicates that the range is not 
+             configured and the PE derives the range value 
+             from received advertisements from other PEs."
+        DEFVAL           { 0 }
+        ::= { jnxVplsBgpConfigEntry 1 }
+
+     -- Vpls Edge Device (VE) Identifier Table
+
+     jnxVplsBgpVETable OBJECT-TYPE
+         SYNTAX        SEQUENCE OF JnxVplsBgpVEEntry
+         MAX-ACCESS    not-accessible
+         STATUS        current
+         DESCRIPTION
+            "This table associates VPLS Edge devices to a VPLS service"
+         ::= { jnxVplsBgpObjects 2 }
+
+     jnxVplsBgpVEEntry OBJECT-TYPE
+         SYNTAX        JnxVplsBgpVEEntry
+         MAX-ACCESS    not-accessible
+         STATUS        current
+         DESCRIPTION
+            "An entry in this table is created for each VE Id 
+             configured on a PE for a particular VPLS service 
+             instance."
+         INDEX  { jnxVplsConfigIndex, jnxVplsBgpVEId }
+         ::= { jnxVplsBgpVETable 1 }
+
+     JnxVplsBgpVEEntry ::= 
+        SEQUENCE {
+          jnxVplsBgpVEId          Unsigned32,
+          jnxVplsBgpVEName        SnmpAdminString,
+          jnxVplsBgpVEPreference  Unsigned32,
+          jnxVplsBgpVERowStatus   RowStatus,
+          jnxVplsBgpVEStorageType StorageType
+        }
+
+     jnxVplsBgpVEId OBJECT-TYPE
+        SYNTAX        Unsigned32 (1..65535)
+        MAX-ACCESS    not-accessible
+        STATUS        current
+        DESCRIPTION
+            "A secondary index identifying a VE within an
+             instance of a VPLS service."
+        ::= { jnxVplsBgpVEEntry 1 }
+
+     jnxVplsBgpVEName OBJECT-TYPE
+        SYNTAX        SnmpAdminString
+        MAX-ACCESS    read-only
+        STATUS        current
+        DESCRIPTION
+            "Descriptive name for the site or u-PE assciated with 
+             this VE Id."
+        DEFVAL { "" }
+        ::= { jnxVplsBgpVEEntry 2 }
+
+     jnxVplsBgpVEPreference OBJECT-TYPE
+        SYNTAX        Unsigned32 (0..65535)
+        MAX-ACCESS    read-only
+        STATUS        current
+        DESCRIPTION
+            "Specifies the preference of the VE Id on this PE 
+             if the site is multi-homed and VE Id is re-used."
+        DEFVAL           { 0 }
+        ::= { jnxVplsBgpVEEntry 3 }
+
+     jnxVplsBgpVERowStatus OBJECT-TYPE
+        SYNTAX        RowStatus
+        MAX-ACCESS    read-only
+        STATUS        current
+        DESCRIPTION
+            "This variable is used to create, modify, and/or
+             delete a row in this table.  When a row in this
+             table is in active(1) state, no objects in that row
+             can be modified except jnxVplsBgpSiteRowStatus."
+        ::= { jnxVplsBgpVEEntry 5 }
+
+     jnxVplsBgpVEStorageType OBJECT-TYPE   
+          SYNTAX        StorageType  
+
+
+          MAX-ACCESS    read-only  
+          STATUS        current  
+          DESCRIPTION  
+               "This variable indicates the storage type for this row."  
+          DEFVAL { volatile }
+          ::= { jnxVplsBgpVEEntry 6 }  
+
+      -- VPLS BGP PW Binding Table 
+
+      jnxVplsBgpPwBindTable OBJECT-TYPE 
+          SYNTAX          SEQUENCE OF JnxVplsBgpPwBindEntry 
+          MAX-ACCESS      not-accessible 
+          STATUS          current 
+          DESCRIPTION    
+               "This table provides BGP specific information for 
+                an association between a VPLS service and the 
+                corresponding Pseudo Wires. A service can have more 
+                than one Pseudo Wire association. Pseudo Wires are 
+                defined in the pwTable." 
+          ::= { jnxVplsBgpObjects 3 } 
+
+      jnxVplsBgpPwBindEntry OBJECT-TYPE 
+          SYNTAX          JnxVplsBgpPwBindEntry 
+          MAX-ACCESS      not-accessible 
+          STATUS          current 
+          DESCRIPTION     
+               "Each row represents an association between a 
+                VPLS instance and one or more Pseudo Wires 
+                defined in the pwTable. Each index is unique 
+                in describing an entry in this table. However
+                both indexes are required to define the one 
+                to many association of service to pseudowire.
+
+                An entry in this table in instantiated only when
+                BGP signalling is used to configure VPLS service.
+
+                Each entry in this table provides BGP specific
+                information for the VPlS represented by 
+                jnxVplsConfigIndex." 
+          INDEX  { jnxVplsConfigIndex, jnxVplsPwBindIndex } 
+          ::= { jnxVplsBgpPwBindTable 1 } 
+
+      JnxVplsBgpPwBindEntry ::= 
+          SEQUENCE { 
+              jnxVplsBgpPwBindLocalVEId        Unsigned32,
+              jnxVplsBgpPwBindRemoteVEId       Unsigned32 
+          } 
+
+
+
+      jnxVplsBgpPwBindLocalVEId   OBJECT-TYPE 
+           SYNTAX          Unsigned32 (1..65535)
+           MAX-ACCESS      read-only 
+           STATUS          current 
+           DESCRIPTION     
+                "Identifies the local VE that this Pseudo Wire
+                 is associated with."
+          ::= { jnxVplsBgpPwBindEntry 1 } 
+
+      jnxVplsBgpPwBindRemoteVEId   OBJECT-TYPE 
+           SYNTAX          Unsigned32 (1..65535)
+           MAX-ACCESS      read-only 
+           STATUS          current 
+           DESCRIPTION     
+                "Identifies the remote VE that this Pseudo Wire
+                 is associated with."
+          ::= { jnxVplsBgpPwBindEntry 2 } 
+
+     END       
+