Initial commitHEADmain

1 files changed, 331 insertions, 0 deletions

diff --git a/MIBS/junos/JUNIPER-RPS-MIB b/MIBS/junos/JUNIPER-RPS-MIB
new file mode 100644
index 0000000..4299544
--- /dev/null
+++ b/MIBS/junos/JUNIPER-RPS-MIB
@@ -0,0 +1,331 @@
+--
+-- Juniper Enterprise Specific MIB: RPS 
+--
+-- Copyright (c) 2007-2009, Juniper Networks, Inc.
+-- All rights reserved.
+--
+-- The contents of this document are subject to change without notice.
+--
+
+JUNIPER-RPS-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, Integer32
+        FROM SNMPv2-SMI
+    TEXTUAL-CONVENTION, DisplayString
+        FROM SNMPv2-TC
+    jnxRPS
+        FROM JUNIPER-EX-SMI;
+
+
+jnxRPSMIBObjects  MODULE-IDENTITY
+    LAST-UPDATED "200708290000Z"
+    ORGANIZATION "Juniper Networks, Inc."
+    CONTACT-INFO
+        "Juniper Technical Assistance Center
+         Juniper Networks, Inc.
+         1133 Innovation Way
+         Sunnyvale, CA 94089
+         E-mail: support@juniper.net"
+    DESCRIPTION
+        "This module contains definitions of management information for
+        Redundant power supply."
+
+    REVISION
+        "200908070000Z" -- Fri Aug 07 00:00:00 2009 UTC
+
+    DESCRIPTION
+        "Data types of jnxRPSFanStatus and jnxRPSSystemStatus are 
+         changed to JnxRPSStatus"
+
+    ::= { jnxRPS 1 }
+
+JnxRPSStatus ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION  "RPS Status."
+    SYNTAX       INTEGER {
+                     green(0),
+                     red(1),
+                     amber(2),
+                     green-blink(3),
+                     red-blink(4),
+                     amber-blink(5),
+                     off(6)
+                 }
+
+--
+-- Definition of RPS Version information Table
+--
+
+    jnxRPSVersionTable OBJECT-TYPE
+        SYNTAX SEQUENCE OF JnxRPSVersionEntry
+        MAX-ACCESS     not-accessible
+        STATUS         current
+        DESCRIPTION
+                "A Table containing RPS Version details."
+
+        ::= { jnxRPSMIBObjects 1 }
+
+    jnxRPSVersionEntry OBJECT-TYPE
+        SYNTAX JnxRPSVersionEntry
+        MAX-ACCESS     not-accessible
+        STATUS         current
+        DESCRIPTION
+                "RPS Version details on a specific serial number."
+
+        INDEX { jnxRPSSerialNumber }
+        ::= { jnxRPSVersionTable 1 }
+
+    JnxRPSVersionEntry ::= SEQUENCE {
+        jnxRPSSerialNumber     DisplayString,
+        jnxRPSModel            DisplayString,
+        jnxRPSFirmwareVersion  DisplayString ,
+        jnxRPSUBootVersion     DisplayString }
+
+    jnxRPSSerialNumber OBJECT-TYPE
+        SYNTAX          DisplayString (SIZE (12))
+        MAX-ACCESS      not-accessible
+        STATUS          current
+        DESCRIPTION
+                "The RPS Serial Number of the Chassis."
+        ::= { jnxRPSVersionEntry 1 }
+
+    jnxRPSModel OBJECT-TYPE
+        SYNTAX          DisplayString (SIZE (0..255))
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+                "The RPS Model name of the Chassis."
+        ::= { jnxRPSVersionEntry 2 }
+
+    jnxRPSFirmwareVersion OBJECT-TYPE
+        SYNTAX          DisplayString (SIZE (0..12))
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+                "The RPS Firmware version of the Chassis."
+        ::= { jnxRPSVersionEntry 3 }
+
+    jnxRPSUBootVersion OBJECT-TYPE
+        SYNTAX          DisplayString (SIZE (0..12))
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+                "The RPS UBoot verison of the Chassis."
+        ::= { jnxRPSVersionEntry 4 }
+
+--
+-- Definition of RPS Status Table
+--
+
+    jnxRPSStatusTable OBJECT-TYPE
+        SYNTAX SEQUENCE OF JnxRPSStatusEntry
+        MAX-ACCESS      not-accessible
+        STATUS          current
+        DESCRIPTION
+                "A table containing RPS Fan and System Status for each slot."
+        ::= { jnxRPSMIBObjects 2 }
+
+    jnxRPSStatusEntry OBJECT-TYPE
+        SYNTAX JnxRPSStatusEntry
+        MAX-ACCESS      not-accessible
+        STATUS          current
+        DESCRIPTION
+                "Status information for each FAN and SYSTEM slot."
+
+        INDEX { jnxRPSSerialNumber }
+        ::= { jnxRPSStatusTable 1 }
+
+    JnxRPSStatusEntry ::= SEQUENCE {
+        jnxRPSFanStatus     JnxRPSStatus,
+        jnxRPSSystemStatus  JnxRPSStatus }
+
+    jnxRPSFanStatus OBJECT-TYPE
+        SYNTAX JnxRPSStatus
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+                "The RPS Fan Status on the chassis ."
+        ::= { jnxRPSStatusEntry 1 }
+
+    jnxRPSSystemStatus OBJECT-TYPE
+        SYNTAX JnxRPSStatus
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+                "The RPS System Status on the Chassis."
+        ::= { jnxRPSStatusEntry 2 }
+
+--
+-- Definition of RPS Power Supply Table
+--
+
+    jnxRPSPowerSupplyTable OBJECT-TYPE
+        SYNTAX SEQUENCE OF JnxRPSPowerSupplyEntry
+        MAX-ACCESS      not-accessible
+        STATUS          current
+        DESCRIPTION
+                "A table containing RPS Power Supply details."
+        ::= { jnxRPSMIBObjects 3 }
+
+    jnxRPSPowerSupplyEntry OBJECT-TYPE
+        SYNTAX JnxRPSPowerSupplyEntry
+        MAX-ACCESS      not-accessible
+        STATUS          current
+        DESCRIPTION
+                "Information about Power Supply Status and Description."
+
+        INDEX { jnxRPSSerialNumber, jnxRPSPowerSupplyIndex }
+        ::= { jnxRPSPowerSupplyTable 1 }
+
+    JnxRPSPowerSupplyEntry ::= SEQUENCE {
+        jnxRPSPowerSupplyIndex        Integer32,
+        jnxRPSPowerSupplySlotId       Integer32,
+        jnxRPSPowerSupplyStatus       DisplayString,
+        jnxRPSPowerSupplyDescription  DisplayString }
+
+    jnxRPSPowerSupplyIndex OBJECT-TYPE
+        SYNTAX          Integer32(1..3)
+        MAX-ACCESS      not-accessible
+        STATUS          current
+        DESCRIPTION
+                "The RPS Power Supply Index of the Chassis corresponding to RPS node."
+        ::= { jnxRPSPowerSupplyEntry 1 }
+
+    jnxRPSPowerSupplySlotId OBJECT-TYPE
+        SYNTAX          Integer32(1..3)
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+                "The RPS Power Supply Slot ID f the Chassis corresponding to RPS node."
+        ::= { jnxRPSPowerSupplyEntry 2 }
+
+    jnxRPSPowerSupplyStatus OBJECT-TYPE
+        SYNTAX          DisplayString (SIZE (0..32))
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+                "The RPS Power Supply Status of the Chassis corresponding to RPS node."
+        ::= { jnxRPSPowerSupplyEntry 3 }
+
+    jnxRPSPowerSupplyDescription OBJECT-TYPE
+        SYNTAX          DisplayString (SIZE (0..32))
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+                "The RPS Power Supply Description of the Chassis corresponding to RPS node."
+        ::= { jnxRPSPowerSupplyEntry 4 }
+
+--
+-- Definition of RPS Led Status Table
+--
+
+    jnxRPSLedPortStatusTable OBJECT-TYPE
+        SYNTAX SEQUENCE OF JnxRPSLedPortStatusEntry
+        MAX-ACCESS       not-accessible
+        STATUS           current
+        DESCRIPTION
+                "A table containing RPS LED Status details."
+        ::= { jnxRPSMIBObjects 4 }
+
+    jnxRPSLedPortStatusEntry OBJECT-TYPE
+        SYNTAX JnxRPSLedPortStatusEntry
+        MAX-ACCESS       not-accessible
+        STATUS           current
+        DESCRIPTION
+                "LED Port status of each port."
+
+        INDEX { jnxRPSSerialNumber, jnxRPSLedPortIndex }
+        ::= { jnxRPSLedPortStatusTable 1 }
+
+    JnxRPSLedPortStatusEntry ::= SEQUENCE {
+        jnxRPSLedPortIndex   Integer32,
+        jnxRPSLedPortStatus  DisplayString }
+
+    jnxRPSLedPortIndex OBJECT-TYPE
+        SYNTAX          Integer32(1..6)
+        MAX-ACCESS      not-accessible
+        STATUS          current
+        DESCRIPTION
+                "The RPS Led Port Index of the Chassis corresponding to RPS node."
+        ::= { jnxRPSLedPortStatusEntry 1 }
+
+    jnxRPSLedPortStatus OBJECT-TYPE
+        SYNTAX          DisplayString (SIZE (0..32))
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+                "The RPS Led Port Status of the Chassis corresponding to RPS node."
+        ::= { jnxRPSLedPortStatusEntry 2 }
+
+--
+-- Definition of RPS Port Status Table
+--
+
+    jnxRPSPortStatusTable OBJECT-TYPE
+        SYNTAX SEQUENCE OF JnxRPSPortStatusEntry
+        MAX-ACCESS      not-accessible
+        STATUS          current
+        DESCRIPTION
+                "A table containing RPS Port Status details."
+        ::= { jnxRPSMIBObjects 5 }
+
+    jnxRPSPortStatusEntry OBJECT-TYPE
+        SYNTAX JnxRPSPortStatusEntry
+        MAX-ACCESS      not-accessible
+        STATUS          current
+        DESCRIPTION
+                "Port Priority and Status for each port ."
+
+        INDEX { jnxRPSSerialNumber, jnxRPSPortIndex }
+        ::= { jnxRPSPortStatusTable 1 }
+
+    JnxRPSPortStatusEntry ::= SEQUENCE {
+        jnxRPSPortIndex           Integer32,
+        jnxRPSPortId              Integer32,
+        jnxRPSPortStatus          Integer32,
+        jnxRPSPortPriority        Integer32,
+        jnxRPSPortPowerRequested  DisplayString }
+
+    jnxRPSPortIndex OBJECT-TYPE
+        SYNTAX          Integer32(1..6)
+        MAX-ACCESS      not-accessible
+        STATUS          current
+        DESCRIPTION
+                "The RPS Port Index of the Chassis corresponding to RPS node."
+        ::= { jnxRPSPortStatusEntry 1 }
+
+    jnxRPSPortId OBJECT-TYPE
+        SYNTAX          Integer32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+                "The RPS Port ID of the Chassis corresponding to RPS node."
+        ::= { jnxRPSPortStatusEntry 2 }
+
+
+    jnxRPSPortStatus OBJECT-TYPE
+        SYNTAX          Integer32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+                "The RPS Port Status of the Chassis corresponding to RPS node."
+        ::= { jnxRPSPortStatusEntry 3 }
+
+    jnxRPSPortPriority OBJECT-TYPE
+        SYNTAX          Integer32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+                "The RPS Port Priority of the Chassis corresponding to RPS node."
+        ::= { jnxRPSPortStatusEntry 4 }
+
+    jnxRPSPortPowerRequested OBJECT-TYPE
+        SYNTAX          DisplayString (SIZE (0..32))
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+                "The RPS Led Port Power Requested of the Chassis corresponding to RPS node."
+        ::= { jnxRPSPortStatusEntry 5 }
+
+END