Initial commitHEADmain

1 files changed, 371 insertions, 0 deletions

diff --git a/MIBS/huawei/HUAWEI-PERFORMANCE-MIB b/MIBS/huawei/HUAWEI-PERFORMANCE-MIB
new file mode 100644
index 0000000..4eb93d6
--- /dev/null
+++ b/MIBS/huawei/HUAWEI-PERFORMANCE-MIB
@@ -0,0 +1,371 @@
+-- ==================================================================
+-- Copyright (C) 2002 by  HUAWEI TECHNOLOGIES. All rights reserved.
+-- 
+-- Description: HUAWEI private rmon alarm Information MIB.
+-- Reference:
+-- Version:     V1.0
+-- History:
+--              Created by Qizhenglin, 2002.8.15
+-- ==================================================================
+
+HUAWEI-PERFORMANCE-MIB DEFINITIONS ::= BEGIN
+
+    IMPORTS
+        DisplayString
+            FROM RFC1213-MIB
+        OBJECT-TYPE
+            FROM RFC-1212
+        OwnerString
+            FROM IF-MIB
+        hwInternetProtocol
+            FROM HUAWEI-MIB
+        EntryStatus
+            FROM RMON-MIB;
+
+
+    --  This mib is supplementary for RMON-MIB(rfc2819). It includes only one table. 
+    --  The mib defines two new objects.One is to set the alarm object by 
+    --  expression,the other is to limit the existing time of an alarm row.
+
+    rmonExtend         OBJECT IDENTIFIER ::= { hwInternetProtocol 4 }
+    
+    performance        OBJECT IDENTIFIER ::= { rmonExtend 4 }
+
+
+    prialarmTable OBJECT-TYPE
+        SYNTAX SEQUENCE OF PriAlarmEntry
+        ACCESS not-accessible
+        STATUS mandatory
+        DESCRIPTION
+            "A list of alarm entries."
+        ::= { performance 1 }
+
+    prialarmEntry OBJECT-TYPE
+        SYNTAX PriAlarmEntry
+        ACCESS not-accessible
+        STATUS mandatory
+        DESCRIPTION
+            "A list of parameters that set up a periodic checking
+            for alarm conditions. For example, an instance of the
+            alarmValue object might be named alarmValue.8"
+        INDEX { prialarmIndex }
+        ::= { prialarmTable 1 }
+
+    PriAlarmEntry ::= SEQUENCE {
+        prialarmIndex                   INTEGER (1..65535),
+        prialarmInterval                INTEGER,
+        prialarmVariable                DisplayString,
+        prialarmSympol                  DisplayString,
+        prialarmSampleType              INTEGER,
+        prialarmValue                   INTEGER,
+        prialarmStartupAlarm            INTEGER,
+        prialarmRisingThreshold         INTEGER,
+        prialarmFallingThreshold        INTEGER,
+        prialarmRisingEventIndex        INTEGER (0..65535),
+        prialarmFallingEventIndex       INTEGER (0..65535),
+        prialarmStatCycle               INTEGER,
+        prialarmStatType                INTEGER,
+        prialarmOwner                   OwnerString,
+        prialarmStatus                  EntryStatus
+        }
+
+    prialarmIndex OBJECT-TYPE
+        SYNTAX INTEGER (1..65535)
+        ACCESS read-only
+        STATUS mandatory
+        DESCRIPTION
+            "An index that uniquely identifies an entry in the
+            alarm table.  Each such entry defines a
+            diagnostic sample at a particular interval
+            for an object on the device."
+        ::= { prialarmEntry 1 }
+
+    prialarmInterval OBJECT-TYPE
+        SYNTAX INTEGER
+        ACCESS read-create
+        STATUS mandatory
+        DESCRIPTION
+            "The interval in seconds over which the data is
+            sampled and compared with the rising and falling
+            thresholds.  When setting this variable, care
+            should be taken in the case of deltaValue
+            sampling - the interval should be set short enough
+            that the sampled variable is very unlikely to
+            increase or decrease by more than 2^31 - 1 during
+            a single sampling interval.
+
+            This object may not be modified if the associated
+            alarmStatus object is equal to valid(1)."
+        ::= { prialarmEntry 2 }
+
+    prialarmVariable OBJECT-TYPE
+        SYNTAX DisplayString
+        ACCESS read-create
+        STATUS mandatory
+        DESCRIPTION
+            "The object identifier of the particular variable to be
+            sampled.  Only variables that resolve to an ASN.1 primitive
+            type of INTEGER (INTEGER, Integer32, Counter32, Counter64,
+            Gauge, or TimeTicks) may be sampled.
+
+            Because SNMP access control is articulated entirely
+            in terms of the contents of MIB views, no access
+            control mechanism exists that can restrict the value of
+            this object to identify only those objects that exist
+            in a particular MIB view.  Because there is thus no
+            acceptable means of restricting the read access that
+            could be obtained through the alarm mechanism, the
+            probe must only grant write access to this object in
+            those views that have read access to all objects on
+            the probe.
+
+            During a set operation, if the supplied variable name is
+            not available in the selected MIB view, a badValue error
+            must be returned.  If at any time the variable name of
+            an established alarmEntry is no longer available in the
+            selected MIB view, the probe must change the status of
+            this alarmEntry to invalid(4).
+
+            This object may not be modified if the associated
+            alarmStatus object is equal to valid(1)."
+        ::= { prialarmEntry 3 }
+
+    prialarmSympol OBJECT-TYPE
+        SYNTAX  DisplayString
+        ACCESS read-create
+        STATUS mandatory
+        DESCRIPTION
+            "The string which the alarm line described."
+        ::= {prialarmEntry 4 }
+
+    prialarmSampleType OBJECT-TYPE
+        SYNTAX INTEGER {
+            absoluteValue(1),
+            deltaValue(2),
+            changeratioValue(3)
+            }
+        ACCESS read-create
+        STATUS mandatory
+        DESCRIPTION
+            "The method of sampling the selected variable and
+            calculating the value to be compared against the
+            thresholds.  If the value of this object is
+            absoluteValue(1), the value of the selected variable
+            will be compared directly with the thresholds at the
+            end of the sampling interval.  If the value of this
+            object is deltaValue(2), the value of the selected
+            variable at the last sample will be subtracted from
+            the current value, and the difference compared with
+            the thresholds.If the value of this object is 
+            changeratioValue(3),the value of the selected variable
+            will be the change ratio of the selected variable,
+            which is that the value of the selected variable at 
+            the last sample will be substracted from the current 
+            value,and the difference divided by the sampling 
+            interval,and the result compared with the thresholds.
+
+            This object may not be modified if the associated
+            alarmStatus object is equal to valid(1)."
+        ::= { prialarmEntry 5 }
+
+    prialarmValue OBJECT-TYPE
+        SYNTAX INTEGER
+        ACCESS read-only
+        STATUS mandatory
+        DESCRIPTION
+            "The value of the statistic during the last sampling
+            period.  For example, if the sample type is deltaValue,
+            this value will be the difference between the samples
+            at the beginning and end of the period.  If the sample
+            type is absoluteValue, this value will be the sampled
+            value at the end of the period.
+            This is the value that is compared with the rising and
+            falling thresholds.
+
+            The value during the current sampling period is not
+            made available until the period is completed and will
+            remain available until the next period completes."
+        ::= { prialarmEntry 6 }
+
+    prialarmStartupAlarm OBJECT-TYPE
+        SYNTAX INTEGER {
+            risingAlarm(1),
+            fallingAlarm(2),
+            risingOrFallingAlarm(3)
+            }
+        ACCESS read-create
+        STATUS mandatory
+        DESCRIPTION
+            "The alarm that may be sent when this entry is first
+            set to valid.  If the first sample after this entry
+            becomes valid is greater than or equal to the
+            risingThreshold and alarmStartupAlarm is equal to
+            risingAlarm(1) or risingOrFallingAlarm(3), then a single
+            rising alarm will be generated.  If the first sample
+            after this entry becomes valid is less than or equal
+            to the fallingThreshold and alarmStartupAlarm is equal
+            to fallingAlarm(2) or risingOrFallingAlarm(3), then a
+            single falling alarm will be generated.
+
+            This object may not be modified if the associated
+            alarmStatus object is equal to valid(1)."
+        ::= { prialarmEntry 7 }
+
+    prialarmRisingThreshold OBJECT-TYPE
+        SYNTAX INTEGER
+        ACCESS read-create
+        STATUS mandatory
+        DESCRIPTION
+            "A threshold for the sampled statistic.  When the current
+            sampled value is greater than or equal to this threshold,
+            and the value at the last sampling interval was less than
+            this threshold, a single event will be generated.
+            A single event will also be generated if the first
+            sample after this entry becomes valid is greater than or
+            equal to this threshold and the associated
+            alarmStartupAlarm is equal to risingAlarm(1) or
+            risingOrFallingAlarm(3).
+
+            After a rising event is generated, another such event
+            will not be generated until the sampled value
+            falls below this threshold and reaches the
+            alarmFallingThreshold.
+
+            This object may not be modified if the associated
+            alarmStatus object is equal to valid(1)."
+        ::= { prialarmEntry 8 }
+
+    prialarmFallingThreshold OBJECT-TYPE
+        SYNTAX INTEGER
+        ACCESS read-create
+        STATUS mandatory
+        DESCRIPTION
+            "A threshold for the sampled statistic.  When the current
+            sampled value is less than or equal to this threshold,
+            and the value at the last sampling interval was greater than
+            this threshold, a single event will be generated.
+            A single event will also be generated if the first
+            sample after this entry becomes valid is less than or
+            equal to this threshold and the associated
+            alarmStartupAlarm is equal to fallingAlarm(2) or
+            risingOrFallingAlarm(3).
+
+            After a falling event is generated, another such event
+            will not be generated until the sampled value
+            rises above this threshold and reaches the
+            alarmRisingThreshold.
+
+            This object may not be modified if the associated
+            alarmStatus object is equal to valid(1)."
+        ::= { prialarmEntry 9 }
+
+    prialarmRisingEventIndex OBJECT-TYPE
+        SYNTAX INTEGER (0..65535)
+        ACCESS read-create
+        STATUS mandatory
+        DESCRIPTION
+            "The index of the eventEntry that is
+            used when a rising threshold is crossed.  The
+            eventEntry identified by a particular value of
+            this index is the same as identified by the same value
+            of the eventIndex object.  If there is no
+            corresponding entry in the eventTable, then
+            no association exists.  In particular, if this value
+            is zero, no associated event will be generated, as
+            zero is not a valid event index.
+
+            This object may not be modified if the associated
+            alarmStatus object is equal to valid(1)."
+        ::= { prialarmEntry 10 }
+
+    prialarmFallingEventIndex OBJECT-TYPE
+        SYNTAX INTEGER (0..65535)
+        ACCESS read-create
+        STATUS mandatory
+        DESCRIPTION
+            "The index of the eventEntry that is
+            used when a falling threshold is crossed.  The
+            eventEntry identified by a particular value of
+            this index is the same as identified by the same value
+            of the eventIndex object.  If there is no
+            corresponding entry in the eventTable, then
+            no association exists.  In particular, if this value
+            is zero, no associated event will be generated, as
+            zero is not a valid event index.
+
+            This object may not be modified if the associated
+            alarmStatus object is equal to valid(1)."
+        ::= { prialarmEntry 11 }
+
+    prialarmStatCycle             OBJECT-TYPE
+        SYNTAX INTEGER
+        ACCESS read-create
+        STATUS mandatory
+        DESCRIPTION
+            " The time alarm line exists. When the value
+             of prialarmStatType is during(2),set prialarmStatCycle
+             to decide how long the alarm line exists."
+        ::= { prialarmEntry 12 }
+
+
+    prialarmStatType              OBJECT-TYPE
+        SYNTAX INTEGER{
+            forever(1),
+            during(2)
+            }
+        ACCESS read-create
+        STATUS mandatory
+        DESCRIPTION
+            "It expresses alarm state type.To choose forever(1) 
+            , the alarm line will exist forever. To choose
+            during(2) , the alarm line will be deleted after 
+            the time setting for 'prialarmStatCycle'."
+        ::= { prialarmEntry 13 }
+
+    prialarmOwner OBJECT-TYPE
+        SYNTAX OwnerString
+        ACCESS read-create
+        STATUS mandatory
+        DESCRIPTION
+            "The entity that configured this entry and is therefore
+            using the resources assigned to it."
+        ::= { prialarmEntry 14 }
+
+    prialarmStatus OBJECT-TYPE
+        SYNTAX EntryStatus
+        ACCESS read-create
+        STATUS mandatory
+        DESCRIPTION
+            "The status of this alarm entry."
+        ::= { prialarmEntry 15 }
+
+    --  extend from Remote Network Monitoring Traps
+
+    rmonExtendEventsV2 OBJECT-IDENTITY
+        STATUS      current
+        DESCRIPTION "Definition point for pri RMON notifications."
+        ::= { rmonExtend 0 }
+
+    pririsingAlarm NOTIFICATION-TYPE
+        OBJECTS  { prialarmIndex, prialarmSympol, prialarmSampleType,
+        prialarmValue, prialarmRisingThreshold }
+        STATUS   current
+        DESCRIPTION
+            "The SNMP trap that is generated when an alarm
+            entry crosses its rising threshold and generates
+            an event that is configured for sending SNMP
+            traps."
+        ::= { rmonExtendEventsV2 1 }
+
+    prifallingAlarm NOTIFICATION-TYPE
+       OBJECTS { prialarmIndex, prialarmSympol, prialarmSampleType,
+            prialarmValue, prialarmFallingThreshold }
+       STATUS    current
+       DESCRIPTION
+           "The SNMP trap that is generated when an alarm
+            entry crosses its falling threshold and generates
+            an event that is configured for sending SNMP
+            traps."
+       ::= { rmonExtendEventsV2 2 }
+
+END