diff options
| author | David Leutgeb <david.leutgeb@mannundmouse.com> | 2023-12-05 12:25:34 +0100 |
|---|---|---|
| committer | David Leutgeb <david.leutgeb@mannundmouse.com> | 2023-12-05 12:25:34 +0100 |
| commit | 98a672123c7872f6b9b75a9a2b6bb3aea504de6a (patch) | |
| tree | 9b13bd7f563c3198047bd359195327cf28b3caf0 /MIBS/huawei/HUAWEI-L2MULTICAST-MIB | |
| download | mibs-98a672123c7872f6b9b75a9a2b6bb3aea504de6a.tar.gz mibs-98a672123c7872f6b9b75a9a2b6bb3aea504de6a.zip | |
Diffstat (limited to 'MIBS/huawei/HUAWEI-L2MULTICAST-MIB')
| -rw-r--r-- | MIBS/huawei/HUAWEI-L2MULTICAST-MIB | 5890 |
1 files changed, 5890 insertions, 0 deletions
diff --git a/MIBS/huawei/HUAWEI-L2MULTICAST-MIB b/MIBS/huawei/HUAWEI-L2MULTICAST-MIB new file mode 100644 index 0000000..0b751c8 --- /dev/null +++ b/MIBS/huawei/HUAWEI-L2MULTICAST-MIB @@ -0,0 +1,5890 @@ +-- ============================================================================
+-- Copyright (C) 2017 by HUAWEI TECHNOLOGIES. All rights reserved.
+--
+-- Description:
+-- Reference:
+-- Version: V2.09
+-- History:
+-- Created by hexingjian 2008-12-30
+-- modified by xuxuguang 2009-12-10
+-- modified by dingshenyu 2011-12-26
+-- modified by wangweiwei 2014-09-18
+-- modified by shafangzhou 2016-06-23
+-- modified by shafangzhou 2016-08-16
+-- modified by shafangzhou 2016-10-11
+-- modified by liuzhongmiao 2017-06-23
+-- ============================================================================
+
+HUAWEI-L2MULTICAST-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+ MODULE-IDENTITY,OBJECT-TYPE,
+ Counter32, Integer32,Unsigned32, IpAddress,Counter64, NOTIFICATION-TYPE
+ FROM SNMPv2-SMI
+
+ TruthValue,TEXTUAL-CONVENTION,
+ RowStatus, MacAddress, DisplayString
+ FROM SNMPv2-TC
+
+ MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
+ FROM SNMPv2-CONF
+
+ EnabledStatus
+ FROM P-BRIDGE-MIB
+
+ VlanIdOrAny
+ FROM Q-BRIDGE-MIB
+
+ InterfaceIndex,InterfaceIndexOrZero
+ FROM IF-MIB
+
+ hwDatacomm
+ FROM HUAWEI-MIB
+
+ Ipv6Address
+ FROM IPV6-TC
+ InetAddress, InetAddressType
+ FROM INET-ADDRESS-MIB;
+
+
+VlanIdOrAnyOrNone ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "d"
+ STATUS current
+ DESCRIPTION
+ "The VLAN-ID that uniquely identifies a specific VLAN,
+ any VLAN, or no VLAN. The special values 0 and 4095
+ have the same meaning as described in the VlanIdOrAny
+ and VlanIdOrNone TEXTUAL-CONVENTIONs.
+
+ Note that a MIB object that is defined using this
+ TEXTUAL-CONVENTION should clarify the meaning of
+ 'any VLAN' and 'no VLAN' (i.e., the special values
+ 0 and 4095)."
+ SYNTAX Integer32 (0 | 1..4094 | 4095)
+
+hwL2MultiCastMIB MODULE-IDENTITY
+ LAST-UPDATED "201706230000Z"
+ ORGANIZATION "Huawei Technologies Co.,Ltd."
+ CONTACT-INFO
+ "Huawei Industrial Base
+ Bantian, Longgang
+ Shenzhen 518129
+ People's Republic of China
+ Website: http://www.huawei.com
+ Email: support@huawei.com
+ "
+ DESCRIPTION
+ "The MIB module for IGMP Snooping feature.
+
+ Internet Group Management Protocol (IGMP) is the protocol used
+ by IPv4 end hosts to indicate their interest in receiving
+ multicast traffic for certain multicast groups to neighboring
+ multicast routers.
+ IGMP Snooping is a switch protocol. A switch that implements
+ IGMP Snooping listens to the IGMP messages exchanged between
+ the hosts and router, then provides selective transmission of
+ multicast traffic based on multicast mac destination address
+ or multicast group address."
+
+ REVISION "201706230000Z"-- 10 Oct 2016
+ DESCRIPTION
+ "Add hwL2mcReportListeningGrpExceed ,
+ and create 5 params including
+ hwL2mcNotificationsAddressType,
+ hwL2mcNotificationsExceedLimit,
+ hwL2mcNotificationsExceedGroupAddress,
+ hwL2mcNotificationsExceedSourceAddress,
+ hwL2mcNotificationsPortUserMac "
+
+ REVISION "201610110000Z"-- 10 Oct 2016
+ DESCRIPTION
+ "Add hwMldFwdTable."
+
+ REVISION "201608160000Z"-- 16 Aug 2016
+ DESCRIPTION
+ "Add hwL2mcLimitGroupTable ."
+
+ REVISION "201606230000Z"-- 23 Jun 2016
+ DESCRIPTION
+ "Modify range of hwL2mcLimitMaxBandWidth ."
+
+ REVISION "201409180000Z"-- 18 Sep 2014
+ DESCRIPTION
+ "Import NOTIFICATION-TYPE."
+ REVISION "201401120000Z"-- 12 Jan 2014
+ DESCRIPTION
+ "Add new porttype."
+
+ REVISION "201308280000Z"-- 28 Aug 2013
+ DESCRIPTION
+ "Modify import mibs."
+
+ REVISION "201308260000Z"-- 26 Aug 2013
+ DESCRIPTION
+ "Add hwL2mcNotificationsPortIfName to trap hwL2mcPortOtherQuerierTimeout."
+
+ REVISION "201308170000Z"-- 17 Aug 2013
+ DESCRIPTION
+ "Add trap hwL2mcPortOtherQuerierTimeout to the MIB."
+
+ REVISION "200812300000Z"-- 30 Dec 2008
+ DESCRIPTION
+ "Initial version of the MIB."
+
+ ::= { hwDatacomm 181 }
+
+-- Textual Convention
+
+HWPortType ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "type of port :
+ invalid(1):invalid type,
+ pw(2) : pw type,
+ switchport(3) : switchport type,
+ dot1q(4): dot1q sub-interface type,
+ termination(5): termination sub-interface type,
+ board(6): interface board number,
+ VlanPort(7): Vlanif port,
+ qinq-batch-config(9): batch config qinq port ce VLAN ID,
+ dot1q-termination-batch-config(10): batch config dot1q termination port ce VLAN ID,
+ Main-interface-bound-to-vsi(11): Main interface that bound to vsi"
+ SYNTAX INTEGER
+ {
+ invalid(1),
+ pw(2),
+ switchport(3),
+ dot1q(4),
+ termination(5),
+ board(6),
+ vlanPort(7),
+ qinq-batch-config(9),
+ dot1q-termination-batch-config(10),
+ main-interface-bound-to-vsi(11)
+ }
+
+
+
+
+
+
+hwIgspMibObject OBJECT IDENTIFIER ::= { hwL2MultiCastMIB 1 }
+
+
+--
+-- The hwIgspSystemInfo group.
+--
+hwIgspSystemInfo
+ OBJECT IDENTIFIER ::= { hwIgspMibObject 1 }
+
+hwIgmpSnoopingEnabled OBJECT-TYPE
+ SYNTAX EnabledStatus
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "IGMP snooping is enabled or disabled in the global view:
+ 1: enabled
+ 2: disabled
+ The default value is 2.
+ "
+ ::= { hwIgspSystemInfo 1 }
+
+hwSendQueryEnabled OBJECT-TYPE
+ SYNTAX EnabledStatus
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The sending of query packets is enabled or disabled:
+ 1: enabled
+ 2: disabled
+ The default value is 2.
+ Note: Ensure that you query and configure this object after hwIgmpSnoopingEnabled is configured.
+ "
+ ::= { hwIgspSystemInfo 2 }
+
+hwSendQuerySourceIpAddr OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The source IP addresses of the Query messages sent by a device.
+ The value ranges from 1.0.0.0 to 223.255.255.255.
+ The default value is 192.168.0.1.
+ "
+ ::= { hwIgspSystemInfo 3}
+
+
+hwL2mcCacTrapInterval OBJECT-TYPE
+ SYNTAX Integer32(0..1200)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The CAC trap interval. The default is 300."
+ ::= { hwIgspSystemInfo 4}
+
+hwL2mcPerformanceStatisticsInterval OBJECT-TYPE
+ SYNTAX Integer32(5 |15 | 30 | 60)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The Performance statistic interval. The default is 15 minute."
+ ::= { hwIgspSystemInfo 5}
+
+
+
+--
+-- The hwL2mcCfgInfo group.
+--
+hwL2mcCfgInfo
+ OBJECT IDENTIFIER ::= { hwIgspMibObject 2 }
+
+hwL2mcCfgTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF HWL2mcCfgEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table describes the configurations of IGMP snooping in a VLAN or a VSI."
+ ::= { hwL2mcCfgInfo 1 }
+
+hwL2mcCfgEntry OBJECT-TYPE
+ SYNTAX HWL2mcCfgEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry is created for each active VLAN or VSI in the device
+ and deleted when the VLAN or VSI becomes inactive."
+ INDEX { hwL2mcVlanIndex, hwL2mcVsiName }
+ ::= { hwL2mcCfgTable 1 }
+
+HWL2mcCfgEntry ::= SEQUENCE {
+ hwL2mcVlanIndex VlanIdOrAny,
+ hwL2mcVsiName DisplayString,
+ hwL2mcEnabled EnabledStatus,
+ hwL2mcRouterAgingTime Integer32,
+ hwL2mcMaxQueryRespTime Integer32,
+ hwL2mcLastMemQueryInterval Integer32,
+ hwL2mcQueryInterval Integer32,
+ hwL2mcRobustCount Integer32,
+ hwL2mcCheckRouterAlert TruthValue,
+ hwL2mcSendRouterAlert TruthValue,
+ hwL2mcIgmpVersion INTEGER ,
+ hwL2mcFwdMode INTEGER,
+ hwL2mcPromptLeaveEnable EnabledStatus,
+ hwL2mcPromptLeaveAclNum Integer32,
+ hwL2mcRouterPortLearningEnable EnabledStatus,
+ hwL2mcReportSuppressEnable EnabledStatus,
+ hwL2mcIgmpQuerierEnable EnabledStatus,
+ hwL2mcIgmpSsmMappingEnable EnabledStatus,
+ hwL2mcSsmAclNum Integer32,
+ hwL2mcProxyRouterProtocolPass TruthValue,
+ hwL2mcAsmSsmFlag Integer32,
+ hwL2mcSrcLifeTime Integer32,
+ hwL2mcPerformanceStatistics EnabledStatus,
+ hwL2mcQuerierElection EnabledStatus,
+ hwETrackEnable EnabledStatus,
+ hwL2mcBackupQueryFwd Integer32,
+ hwL2mcBackupReportFwd Integer32,
+ hwL2mcQuerySuppress Integer32,
+ hwL2mcRtLearnRingLinkage TruthValue,
+ hwL2mcIgmpIpPolicyAclNum Integer32,
+ hwL2mcIgmpSsmMappingPolicy DisplayString,
+ hwL2mcRowStatus RowStatus
+ }
+
+
+hwL2mcVlanIndex OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095.
+ The value ranges from 1 to 4095.
+ "
+ ::= { hwL2mcCfgEntry 1 }
+
+hwL2mcVsiName OBJECT-TYPE
+ SYNTAX DisplayString(SIZE (0..31))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The name of a VSI. If a VLAN is specified, the value is 32."
+ ::= { hwL2mcCfgEntry 2 }
+
+hwL2mcEnabled OBJECT-TYPE
+ SYNTAX EnabledStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Whether IGMP snooping is enabled in a VLAN or a VSI:
+ 1:enabled
+ 2:disabled
+ The default value is 2.
+ "
+ ::= { hwL2mcCfgEntry 3 }
+
+hwL2mcRouterAgingTime OBJECT-TYPE
+ SYNTAX Integer32(1..1000)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The aging time of an interface on a router.
+ The value ranges from 1 to 1000, in seconds.
+ The default value is 180, which router port is created by Igmp Query message.
+ And when it is created by PIM hello messge, the default value is the time of Holdtime in the message.
+ "
+ ::= { hwL2mcCfgEntry 4 }
+
+hwL2mcMaxQueryRespTime OBJECT-TYPE
+ SYNTAX Integer32(1..25)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The maximum response time.
+ The value ranges from 1 to 25, in seconds.
+ The default value is 10, in seconds.
+ "
+ ::= { hwL2mcCfgEntry 5 }
+
+hwL2mcLastMemQueryInterval OBJECT-TYPE
+ SYNTAX Integer32(1..5)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The last member query interval.
+ The value ranges from 1 to 5, in seconds.
+ The default value is 1, in seconds.
+ "
+ ::= { hwL2mcCfgEntry 6 }
+
+hwL2mcQueryInterval OBJECT-TYPE
+ SYNTAX Integer32(1..65535)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The query interval.
+ The value ranges from 1 to 65535, in seconds.
+ The default value is 60, in seconds.
+ "
+ ::= { hwL2mcCfgEntry 7 }
+
+hwL2mcRobustCount OBJECT-TYPE
+ SYNTAX Integer32(2..5)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The robustness variable.
+ The value ranges from 2 to 5.
+ The default value is 2.
+ "
+ ::= { hwL2mcCfgEntry 8 }
+
+hwL2mcCheckRouterAlert OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Whether to check the router-alert of a packet.
+ The default value is false.
+ "
+ ::= { hwL2mcCfgEntry 9 }
+
+hwL2mcSendRouterAlert OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Whether to send the router-alert of a packet.
+ The default value is true.
+ "
+ ::= { hwL2mcCfgEntry 10 }
+
+hwL2mcIgmpVersion OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ version1(1),
+ version2(2),
+ version3(3)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The version of the IGMP packets.
+ The value ranges from 1 to 3.
+ The default value is 2.
+ "
+ ::= { hwL2mcCfgEntry 11 }
+
+hwL2mcFwdMode OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ ip(1),
+ mac(2)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The forwarding mode:
+ 1: IP
+ 2: MAC
+ The default value is 1.
+ "
+ ::= { hwL2mcCfgEntry 12 }
+
+hwL2mcPromptLeaveEnable OBJECT-TYPE
+ SYNTAX EnabledStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Whether the prompt leave is enabled:
+ 1: enabled
+ 2: disabled
+ The default value is 2.
+ "
+ ::= { hwL2mcCfgEntry 13 }
+
+hwL2mcPromptLeaveAclNum OBJECT-TYPE
+ SYNTAX Integer32(0|2000..3999)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Whether the prompt leave complies with the ACL rules. The ACL number can be set.
+ The ACL number ranges from 2000 to 3999.
+ The default value is 0, indicating that no ACL number is set.
+ "
+ ::= { hwL2mcCfgEntry 14 }
+
+hwL2mcRouterPortLearningEnable OBJECT-TYPE
+ SYNTAX EnabledStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Whether interface learning is enabled or not in a VLAN:
+ 1: enabled
+ 2: disabled
+ The default value is 1.
+ "
+ ::= { hwL2mcCfgEntry 15 }
+
+hwL2mcReportSuppressEnable OBJECT-TYPE
+ SYNTAX EnabledStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Whether the suppression of the IGMP Report message (proxy) is enabled:
+ 1: enabled
+ 2: disabled
+ The default value is 2.
+ "
+ ::= { hwL2mcCfgEntry 16 }
+
+hwL2mcIgmpQuerierEnable OBJECT-TYPE
+ SYNTAX EnabledStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Whether the querier is enabled:
+ 1: enabled
+ 2: disabled
+ The default value is 2.
+ "
+ ::= { hwL2mcCfgEntry 17 }
+
+hwL2mcIgmpSsmMappingEnable OBJECT-TYPE
+ SYNTAX EnabledStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Whether Ssm-Mapping is enabled:
+ 1: enabled
+ 2: disabled
+ The default value is 2.
+ "
+ ::= { hwL2mcCfgEntry 18 }
+
+hwL2mcSsmAclNum OBJECT-TYPE
+ SYNTAX Integer32(0|2000..2999)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "That SSM complies with the ACL number.
+ The ACL number ranges from 2000 to 2999.
+ The default value is 0, indicating that no ACL number is set.
+ "
+ ::= { hwL2mcCfgEntry 19 }
+
+hwL2mcProxyRouterProtocolPass OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Whether protocol packets are allowed to pass a router port when proxy is enabled.
+ The default value is false.
+ "
+ ::= { hwL2mcCfgEntry 20 }
+
+hwL2mcAsmSsmFlag OBJECT-TYPE
+ SYNTAX Integer32(1..3)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "That restric study:
+ 1: asm-ssm
+ 2: asm-only
+ 3: ssm-only
+ The default value is 1.
+ "
+ ::= { hwL2mcCfgEntry 21 }
+
+hwL2mcSrcLifeTime OBJECT-TYPE
+ SYNTAX Integer32(60..1000)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "That source aging time:
+ range from 60 to 1000
+ The default value is 210.
+ "
+ ::= { hwL2mcCfgEntry 22 }
+
+hwL2mcPerformanceStatistics OBJECT-TYPE
+ SYNTAX EnabledStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "That performance statistic is enabled:
+ 1: enabled
+ 2: disabled
+ The default value is 2.
+ "
+ ::= { hwL2mcCfgEntry 23 }
+
+hwL2mcQuerierElection OBJECT-TYPE
+ SYNTAX EnabledStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "That querier election is enabled:
+ 1: enabled
+ 2: disabled
+ The default value is 2.
+ "
+ ::= { hwL2mcCfgEntry 24 }
+
+hwETrackEnable OBJECT-TYPE
+ SYNTAX EnabledStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The host explicity track is enabled:
+ 1: enabled
+ 2: disabled
+ The default value is 2.
+ "
+ ::= { hwL2mcCfgEntry 25 }
+
+hwL2mcBackupQueryFwd OBJECT-TYPE
+ SYNTAX Integer32(1..3)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "That IGMP query forward :
+ 1: Do not forward;
+ 2: Forward without replace source MAC address;
+ 3: Forward with replace source MAC address;
+ The default value is 1.
+ "
+ ::= { hwL2mcCfgEntry 26 }
+
+hwL2mcBackupReportFwd OBJECT-TYPE
+ SYNTAX Integer32(1..3)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "That IGMP report forward :
+ 1: Do not forward;
+ 2: Forward without replace source MAC address;
+ 3: Forward with replace source MAC address;
+ The default value is 1.
+ "
+ ::= { hwL2mcCfgEntry 27 }
+
+hwL2mcQuerySuppress OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Whether supress IGMP query packet or time of suppress interval.
+ "
+ ::= { hwL2mcCfgEntry 28 }
+
+hwL2mcRtLearnRingLinkage OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Whether responed to link state for SEP.
+ "
+ ::= { hwL2mcCfgEntry 29 }
+
+hwL2mcIgmpIpPolicyAclNum OBJECT-TYPE
+ SYNTAX Integer32(0|2000..3999)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Whether the IGMP ip policy complies with the ACL rules. The ACL number can be set.
+ The ACL number ranges from 2000 to 3999.
+ The default value is 0, indicating that no ACL number is set.
+ "
+ ::= { hwL2mcCfgEntry 30 }
+hwL2mcIgmpSsmMappingPolicy OBJECT-TYPE
+ SYNTAX DisplayString(SIZE (0..31))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The policy name of SSM mapping.
+ "
+ ::= { hwL2mcCfgEntry 31 }
+
+hwL2mcRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The row status."
+ ::= { hwL2mcCfgEntry 100 }
+
+
+
+--
+-- The hwL2mcStatisticsInfo group.
+--
+hwL2mcStatisticsInfo
+ OBJECT IDENTIFIER ::= { hwIgspMibObject 3 }
+
+hwL2mcStatisticsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF HWL2mcStatisticsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table contains VLAN or VSI statistics information
+ for IGMP Snooping."
+ ::= { hwL2mcStatisticsInfo 1 }
+
+hwL2mcStatisticsEntry OBJECT-TYPE
+ SYNTAX HWL2mcStatisticsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry is created for each active VLAN or VSI in the device
+ and deleted when the VLAN or VSI becomes inactive."
+ INDEX { hwL2mcStatsVlanIndex, hwL2mcStatsVsiName }
+ ::= { hwL2mcStatisticsTable 1 }
+
+HWL2mcStatisticsEntry ::= SEQUENCE {
+ hwL2mcStatsVlanIndex VlanIdOrAny,
+ hwL2mcStatsVsiName DisplayString,
+ hwL2mcRecvIgmpV1ReportNum Counter32,
+ hwL2mcRecvIgmpV2ReportNum Counter32,
+ hwL2mcRecvIgmpV3ReportNum Counter32,
+ hwL2mcRecvIgmpLeaveNum Counter32,
+ hwL2mcRecvIgmpV1QueryNum Counter32,
+ hwL2mcRecvIgmpV2QueryNum Counter32,
+ hwL2mcRecvIgmpV3QueryNum Counter32,
+ hwL2mcRecvPimHelloNum Counter32,
+ hwL2mcSendQueryNum Counter32 ,
+ hwL2mcSendQuerySourceNum Counter32,
+ hwL2mcProxyGenQueryNum Counter32,
+ hwL2mcProxyGroupQueryNum Counter32,
+ hwL2mcProxyGroupSourceQueryNum Counter32,
+ hwL2mcIgmpPacketClearStats TruthValue
+ }
+
+hwL2mcStatsVlanIndex OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095.
+ The value ranges from 1 to 4095.
+ "
+ ::= { hwL2mcStatisticsEntry 1 }
+
+hwL2mcStatsVsiName OBJECT-TYPE
+ SYNTAX DisplayString(SIZE (0..31))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The name of a VSI. If a VLAN is specified, the value is 32."
+ ::= { hwL2mcStatisticsEntry 2 }
+
+hwL2mcRecvIgmpV1ReportNum OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of IGMPv1 Report messages received in a VLAN or a VSI."
+ ::= { hwL2mcStatisticsEntry 3 }
+
+hwL2mcRecvIgmpV2ReportNum OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of IGMPv2 Report messages received in a VLAN or a VSI."
+ ::= { hwL2mcStatisticsEntry 4 }
+
+hwL2mcRecvIgmpV3ReportNum OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of IGMPv3 Report messages received in a VLAN or a VSI."
+ ::= { hwL2mcStatisticsEntry 5 }
+
+hwL2mcRecvIgmpLeaveNum OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of IGMP Leave messages received in a VLAN or a VSI."
+ ::= { hwL2mcStatisticsEntry 6 }
+
+hwL2mcRecvIgmpV1QueryNum OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of IGMPv1 Query messages received in a VLAN or a VSI."
+ ::= { hwL2mcStatisticsEntry 7 }
+
+hwL2mcRecvIgmpV2QueryNum OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of IGMPv2 Query messages received in a VLAN or a VSI."
+ ::= { hwL2mcStatisticsEntry 8 }
+
+hwL2mcRecvIgmpV3QueryNum OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of IGMPv3 Query messages received in a VLAN or a VSI."
+ ::= { hwL2mcStatisticsEntry 9 }
+
+hwL2mcRecvPimHelloNum OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of PIM Hello messages received in a VLAN or a VSI."
+ ::= { hwL2mcStatisticsEntry 10 }
+
+hwL2mcSendQueryNum OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of IGMP Query messages (the source address is 0) in a VLAN or a VSI."
+ ::= { hwL2mcStatisticsEntry 11 }
+
+hwL2mcSendQuerySourceNum OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of IGMP Query messages (the source address is not 0) in a VLAN or a VSI."
+ ::= { hwL2mcStatisticsEntry 12 }
+
+hwL2mcProxyGenQueryNum OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of Query messages sent by the proxy in a VLAN or a VSI."
+ ::= { hwL2mcStatisticsEntry 13 }
+
+hwL2mcProxyGroupQueryNum OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of Query messages sent by the proxy in a VLAN or a VSI to a specified group."
+ ::= { hwL2mcStatisticsEntry 14 }
+
+hwL2mcProxyGroupSourceQueryNum OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of Query messages sent by the proxy in a VLAN or a VSI to a specified source group."
+ ::= { hwL2mcStatisticsEntry 15 }
+
+hwL2mcIgmpPacketClearStats OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Whether to clear the statistics of IGMP snooping. If the value is 1, it indicates that the statistics need to be cleared."
+ ::= { hwL2mcStatisticsEntry 30 }
+
+
+--
+-- The hwL2mcFwdInfo group.
+--
+hwL2mcFwdInfo
+ OBJECT IDENTIFIER ::= { hwIgspMibObject 4 }
+
+hwL2mcFwdTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF HWL2mcFwdEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table contains l2 multicast forward information
+ for IGMP Snooping."
+ ::= { hwL2mcFwdInfo 1 }
+
+hwL2mcFwdEntry OBJECT-TYPE
+ SYNTAX HWL2mcFwdEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry is created for each active VLAN or VSI in the device create a forwarding table entry and delete when
+ a forwarding table entry deleted."
+ INDEX { hwL2mcFwdVlanIndex, hwL2mcFwdVsiName, hwL2mcFwdGroupAddress, hwL2mcFwdSourceAddress, hwL2mcFwdPortType,
+ hwL2mcFwdPortIfIndex, hwL2mcFwdPortPeId, hwL2mcFwdPortCeId,
+ hwL2mcFwdPeerAddress, hwL2mcFwdVcOrSiteId }
+ ::= { hwL2mcFwdTable 1 }
+
+HWL2mcFwdEntry ::= SEQUENCE {
+ hwL2mcFwdVlanIndex VlanIdOrAny,
+ hwL2mcFwdVsiName DisplayString,
+ hwL2mcFwdGroupAddress IpAddress,
+ hwL2mcFwdSourceAddress IpAddress,
+ hwL2mcFwdPortType HWPortType,
+ hwL2mcFwdPortIfIndex InterfaceIndexOrZero,
+ hwL2mcFwdPortPeId VlanIdOrAny,
+ hwL2mcFwdPortCeId VlanIdOrAny,
+ hwL2mcFwdPeerAddress IpAddress,
+ hwL2mcFwdVcOrSiteId Unsigned32,
+ hwL2mcFwdAddressType INTEGER,
+ hwL2mcFwdHostFlag1 INTEGER,
+ hwL2mcFwdHostFlag2 INTEGER,
+ hwL2mcFwdHostFlag3 INTEGER,
+ hwL2mcFwdHostFlag4 INTEGER
+ }
+
+hwL2mcFwdVlanIndex OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095.
+ The value ranges from 1 to 4095.
+ "
+ ::= { hwL2mcFwdEntry 1 }
+
+hwL2mcFwdVsiName OBJECT-TYPE
+ SYNTAX DisplayString(SIZE (0..31))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The name of a VSI. If a VLAN is specified, the value is 32."
+ ::= { hwL2mcFwdEntry 2 }
+
+hwL2mcFwdGroupAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The group address of a multicast group. In the case of MAC forwarding, the group address is the smallest of 32 IP addresses."
+ ::= { hwL2mcFwdEntry 3 }
+
+hwL2mcFwdSourceAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The source IP address of a multicast group."
+ ::= { hwL2mcFwdEntry 4 }
+
+hwL2mcFwdPortType OBJECT-TYPE
+ SYNTAX HWPortType
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The interface type:
+ 1: Invalid
+ 2: PW interface
+ 3: L2 interface
+ 4: Encapsulation sub-interface
+ 5: Termination sub-interface
+ 6: Interface Board
+ 7: Vlanif Port
+ 11: Main-interface-bound-to-vsi
+ "
+ ::= { hwL2mcFwdEntry 5 }
+
+hwL2mcFwdPortIfIndex OBJECT-TYPE
+ SYNTAX InterfaceIndexOrZero
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The interface index. The value 0 indicates that the interface index is invalid."
+ ::= { hwL2mcFwdEntry 6 }
+
+hwL2mcFwdPortPeId OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The PE VID of an interface.
+ The value ranges from 1 to 4095.
+ The value 4095 indicates that the PE VID is invalid.
+ "
+ ::= { hwL2mcFwdEntry 7 }
+
+hwL2mcFwdPortCeId OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The CE VID of an interface.
+ The value ranges from 1 to 4095.
+ The value 4095 indicates that the CE VID is invalid.
+ "
+ ::= { hwL2mcFwdEntry 8 }
+
+hwL2mcFwdPeerAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The peer IP address of a PW interface. The value 0.0.0.0 indicates that the IP address is invalid."
+ ::= { hwL2mcFwdEntry 9 }
+
+hwL2mcFwdVcOrSiteId OBJECT-TYPE
+ SYNTAX Unsigned32(1..4294967295)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The VC ID or SITE ID of a PW interface."
+ ::= { hwL2mcFwdEntry 10 }
+
+hwL2mcFwdAddressType OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ ip(1),
+ mac(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The address type of an entry:
+ 1: IP
+ 2: MAC
+ The default value is 1.
+ "
+ ::= { hwL2mcFwdEntry 11 }
+
+hwL2mcFwdHostFlag1 OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ static(1),
+ dynamic(2),
+ staticDynamic(3),
+ invalid(4)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The mode to create an interface on the host:
+ 1: static
+ 2: dynamic
+ 3: static and dynamic
+ 4: invalid
+ "
+ ::= { hwL2mcFwdEntry 18 }
+
+hwL2mcFwdHostFlag2 OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ nonMapping(1),
+ mapping(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Whether an interface on the host is created through SSM-mapping:
+ 1: non-mapping
+ 2: mapping
+ "
+ ::= { hwL2mcFwdEntry 19 }
+
+hwL2mcFwdHostFlag3 OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ host(1),
+ router(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The type of an interface created on a router:
+ 1: Interface connected to the host
+ 2: Router interface that replicates multicast data flows
+ "
+ ::= { hwL2mcFwdEntry 20 }
+
+hwL2mcFwdHostFlag4 OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ port(1),
+ static(2),
+ both(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates (S, G) table created :
+ 1: from port;
+ 2: from static;
+ 3: from both
+ the default value is 1
+ "
+ ::= { hwL2mcFwdEntry 21 }
+ hwMldFwdTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF HwMldFwdEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table contains l2 multicast forward information
+ for IGMP Snooping."
+ ::= { hwL2mcFwdInfo 2 }
+
+hwMldFwdEntry OBJECT-TYPE
+ SYNTAX HwMldFwdEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry is created for each active VLAN or VSI in the device create a forwarding table entry and delete when
+ a forwarding table entry deleted."
+ INDEX { hwL2mcFwdVlanIndex, hwL2mcFwdVsiName, hwL2mcFwdGroupAddress, hwL2mcFwdSourceAddress, hwL2mcFwdPortType,
+ hwL2mcFwdPortIfIndex, hwL2mcFwdPortPeId, hwL2mcFwdPortCeId, hwL2mcFwdPeerAddress, hwL2mcFwdVcOrSiteId
+ }
+ ::= { hwMldFwdTable 1 }
+
+ HwMldFwdEntry ::= SEQUENCE {
+ hwMldFwdVlanIndex VlanIdOrAny,
+ hwMldFwdVsiName DisplayString,
+ hwMldFwdGroupAddress Ipv6Address,
+ hwMldFwdSourceAddress Ipv6Address,
+ hwMldFwdPortType HWPortType,
+ hwMldFwdPortIfIndex InterfaceIndexOrZero,
+ hwMldFwdPortPeId VlanIdOrAny,
+ hwMldFwdPortCeId VlanIdOrAny,
+ hwMldFwdPeerAddress Ipv6Address,
+ hwMldFwdVcOrSiteId Unsigned32,
+ hwMldFwdAddressType INTEGER,
+ hwMldFwdHostFlag1 INTEGER,
+ hwMldFwdHostFlag2 INTEGER,
+ hwMldFwdHostFlag3 INTEGER,
+ hwMldFwdHostFlag4 INTEGER
+ }
+
+hwMldFwdVlanIndex OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095.
+ The value ranges from 1 to 4095.
+ "
+ ::= { hwMldFwdEntry 1 }
+
+hwMldFwdVsiName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..31))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The name of a VSI. If a VLAN is specified, the value is 32."
+ ::= { hwMldFwdEntry 2 }
+
+hwMldFwdGroupAddress OBJECT-TYPE
+ SYNTAX Ipv6Address
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The group address of a multicast group. In the case of MAC forwarding, the group address is the smallest of 32 IP addresses."
+ ::= { hwMldFwdEntry 3 }
+
+hwMldFwdSourceAddress OBJECT-TYPE
+ SYNTAX Ipv6Address
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The source IP address of a multicast group."
+ ::= { hwMldFwdEntry 4 }
+
+hwMldFwdPortType OBJECT-TYPE
+ SYNTAX HWPortType
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The interface type:
+ 1: Invalid
+ 2: PW interface
+ 3: L2 interface
+ 4: Encapsulation sub-interface
+ 5: Termination sub-interface
+ 6: Interface Board
+ 7: Vlanif Port
+ 11: Main-interface-bound-to-vsi
+ "
+ ::= { hwMldFwdEntry 5 }
+
+hwMldFwdPortIfIndex OBJECT-TYPE
+ SYNTAX InterfaceIndexOrZero
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The interface index. The value 0 indicates that the interface index is invalid."
+ ::= { hwMldFwdEntry 6 }
+
+hwMldFwdPortPeId OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The PE VID of an interface.
+ The value ranges from 1 to 4095.
+ The value 4095 indicates that the PE VID is invalid.
+ "
+ ::= { hwMldFwdEntry 7 }
+
+hwMldFwdPortCeId OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The CE VID of an interface.
+ The value ranges from 1 to 4095.
+ The value 4095 indicates that the CE VID is invalid.
+ "
+ ::= { hwMldFwdEntry 8 }
+
+hwMldFwdPeerAddress OBJECT-TYPE
+ SYNTAX Ipv6Address
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The peer IP address of a PW interface. The value 0.0.0.0 indicates that the IP address is invalid."
+ ::= { hwMldFwdEntry 9 }
+hwMldFwdVcOrSiteId OBJECT-TYPE
+ SYNTAX Unsigned32 (1..4294967295)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The VC ID or SITE ID of a PW interface."
+ ::= { hwMldFwdEntry 10 }
+
+hwMldFwdAddressType OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ ip(1),
+ mac(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The address type of an entry:
+ 1: IP
+ 2: MAC
+ The default value is 1.
+ "
+ ::= { hwMldFwdEntry 11 }
+
+hwMldFwdHostFlag1 OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ static(1),
+ dynamic(2),
+ staticDynamic(3),
+ invalid(4)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The mode to create an interface on the host:
+ 1: static
+ 2: dynamic
+ 3: static and dynamic
+ 4: invalid
+ "
+ ::= { hwMldFwdEntry 12 }
+hwMldFwdHostFlag2 OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ nonMapping(1),
+ mapping(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Whether an interface on the host is created through SSM-mapping:
+ 1: non-mapping
+ 2: mapping
+ "
+ ::= { hwMldFwdEntry 13 }
+
+hwMldFwdHostFlag3 OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ host(1),
+ router(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The type of an interface created on a router:
+ 1: Interface connected to the host
+ 2: Router interface that replicates multicast data flows
+ "
+ ::= { hwMldFwdEntry 14 }
+
+hwMldFwdHostFlag4 OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ port(1),
+ static(2),
+ both(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates (S, G) table created :
+ 1: from port;
+ 2: from static;
+ 3: from both
+ the default value is 1
+ "
+ ::= { hwMldFwdEntry 15 }
+
+--
+-- The hwGroupInfo group.
+--
+hwL2mcGroupInfo
+ OBJECT IDENTIFIER ::= { hwIgspMibObject 5 }
+
+hwL2mcGroupInfoTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF HWL2mcGroupInfoEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table contains l2 multicast group information
+ for IGMP Snooping."
+ ::= { hwL2mcGroupInfo 1 }
+
+hwL2mcGroupInfoEntry OBJECT-TYPE
+ SYNTAX HWL2mcGroupInfoEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry is created for each active VLAN or VSI in the device create a forwarding table entry and delete when
+ a forwarding table entry deleted."
+ INDEX { hwL2mcGroupVlanIndex, hwL2mcGroupVsiName, hwL2mcGroupGroupAddress, hwL2mcGroupSourceAddress, hwL2mcPortType,
+ hwL2mcGroupPortIfIndex, hwL2mcGroupPortPeId, hwL2mcGroupPortCeId,
+ hwL2mcGroupPeerAddress, hwL2mcGroupVcOrSiteId }
+ ::= { hwL2mcGroupInfoTable 1 }
+
+HWL2mcGroupInfoEntry ::= SEQUENCE {
+ hwL2mcGroupVlanIndex VlanIdOrAny,
+ hwL2mcGroupVsiName DisplayString,
+ hwL2mcGroupGroupAddress IpAddress,
+ hwL2mcGroupSourceAddress IpAddress,
+ hwL2mcPortType HWPortType,
+ hwL2mcGroupPortIfIndex InterfaceIndexOrZero,
+ hwL2mcGroupPortPeId VlanIdOrAny,
+ hwL2mcGroupPortCeId VlanIdOrAny,
+ hwL2mcGroupPeerAddress IpAddress,
+ hwL2mcGroupVcOrSiteId Unsigned32,
+ hwL2mcSourceUpTime Counter32,
+ hwL2mcSourceExpires Counter32,
+ hwL2mcGroupUpTime Counter32,
+ hwL2mcGroupExpires Counter32,
+ hwL2mcGroupFilterFlag INTEGER,
+ hwL2mcGroupHostFlag1 INTEGER,
+ hwL2mcGroupHostFlag2 INTEGER,
+ hwL2mcGroupRowStatus RowStatus
+ }
+
+hwL2mcGroupVlanIndex OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095.
+ The value ranges from 1 to 4095.
+ "
+ ::= { hwL2mcGroupInfoEntry 1 }
+
+hwL2mcGroupVsiName OBJECT-TYPE
+ SYNTAX DisplayString(SIZE (0..31))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The name of a VSI. If a VLAN is specified, the value is 32."
+ ::= { hwL2mcGroupInfoEntry 2 }
+
+hwL2mcGroupGroupAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The IP address of a multicast group."
+ ::= { hwL2mcGroupInfoEntry 3 }
+
+hwL2mcGroupSourceAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The source IP address of a multicast group."
+ ::= { hwL2mcGroupInfoEntry 4 }
+
+hwL2mcPortType OBJECT-TYPE
+ SYNTAX HWPortType
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The interface type:
+ 1: Invalid
+ 2: PW interface
+ 3: L2 interface
+ 4: Encapsulation sub-interface
+ 5: Termination sub-interface
+ 6: Interface Board
+ 7: Vlanif Port
+ 11: Main-interface-bound-to-vsi
+ "
+ ::= { hwL2mcGroupInfoEntry 5 }
+
+hwL2mcGroupPortIfIndex OBJECT-TYPE
+ SYNTAX InterfaceIndexOrZero
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The interface index. The value 0 indicates that the interface index is invalid."
+ ::= { hwL2mcGroupInfoEntry 6 }
+
+hwL2mcGroupPortPeId OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The PE VID of an interface.
+ The value ranges from 1 to 4095.
+ The value 4095 indicates that the PE VID is invalid.
+ "
+ ::= { hwL2mcGroupInfoEntry 7 }
+
+hwL2mcGroupPortCeId OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The CE VID of an interface.
+ The value ranges from 1 to 4095.
+ The value 4095 indicates that the CE VID is invalid.
+ "
+ ::= { hwL2mcGroupInfoEntry 8 }
+
+hwL2mcGroupPeerAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The peer IP address of a PW interface. The value 0.0.0.0 indicates that the IP address is invalid."
+ ::= { hwL2mcGroupInfoEntry 9 }
+
+hwL2mcGroupVcOrSiteId OBJECT-TYPE
+ SYNTAX Unsigned32(1..4294967295)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The VC ID or SITE ID of a PW interface."
+ ::= { hwL2mcGroupInfoEntry 10 }
+
+hwL2mcSourceUpTime OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "How long the source group exists in the forwarding entry."
+ ::= { hwL2mcGroupInfoEntry 14 }
+
+hwL2mcSourceExpires OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The timeout period of the source group in the forwarding entry, that is, the aging time of the source group."
+ ::= { hwL2mcGroupInfoEntry 15 }
+
+hwL2mcGroupUpTime OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "How long the group exists in the forwarding entry."
+ ::= { hwL2mcGroupInfoEntry 16 }
+
+hwL2mcGroupExpires OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "When the group expires in the forwarding entry, that is, the aging time of the source group."
+ ::= { hwL2mcGroupInfoEntry 17 }
+
+hwL2mcGroupFilterFlag OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ include(1),
+ exclude(2),
+ invalid(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The filtering mode:
+ 1: include
+ 2: exclude
+ 3: invalid
+ "
+ ::= { hwL2mcGroupInfoEntry 18 }
+
+hwL2mcGroupHostFlag1 OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ static(1),
+ dynamic(2),
+ staticDynamic(3),
+ invalid(4)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The mode to create an interface on the host:
+ 1: static
+ 2: dynamic
+ 3: static and dynamic
+ 4: invalid
+ "
+ ::= { hwL2mcGroupInfoEntry 19 }
+
+hwL2mcGroupHostFlag2 OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ nonMapping(1),
+ mapping(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Whether an interface on the host is created through SSM-mapping:
+ 1: non-mapping
+ 2: mapping
+ "
+ ::= { hwL2mcGroupInfoEntry 20 }
+
+hwL2mcGroupRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The row status."
+ ::= { hwL2mcGroupInfoEntry 100 }
+
+
+
+--
+-- The hwL2mcGroupCfgInfo group.
+--
+hwL2mcGroupCfgInfo
+ OBJECT IDENTIFIER ::= { hwIgspMibObject 6 }
+
+hwL2mcGroupCfgTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF HWL2mcGroupCfgEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table contains l2 multicast static group information
+ for IGMP Snooping."
+ ::= { hwL2mcGroupCfgInfo 1 }
+
+hwL2mcGroupCfgEntry OBJECT-TYPE
+ SYNTAX HWL2mcGroupCfgEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry is created for each active VLAN or VSI in the device create a static group entry and delete when
+ a static group entry deleted."
+ INDEX { hwGroupCfgPortType, hwGroupCfgPortIfIndex, hwGroupCfgPortPeId, hwGroupCfgPortCeId,
+ hwGroupCfgPeerAddress, hwGroupCfgVcOrSiteId, hwGroupCfgVlanIndex, hwGroupCfgVsiName,
+ hwGroupCfgGroupAddress, hwGroupCfgSourceAddress }
+ ::= { hwL2mcGroupCfgTable 1 }
+
+HWL2mcGroupCfgEntry ::= SEQUENCE {
+ hwGroupCfgPortType HWPortType,
+ hwGroupCfgPortIfIndex InterfaceIndexOrZero,
+ hwGroupCfgPortPeId VlanIdOrAny,
+ hwGroupCfgPortCeId VlanIdOrAny,
+ hwGroupCfgPeerAddress IpAddress,
+ hwGroupCfgVcOrSiteId Unsigned32,
+ hwGroupCfgVlanIndex VlanIdOrAny,
+ hwGroupCfgVsiName DisplayString,
+ hwGroupCfgGroupAddress IpAddress,
+ hwGroupCfgSourceAddress IpAddress,
+ hwGroupCfgRowStatus RowStatus
+ }
+
+hwGroupCfgPortType OBJECT-TYPE
+ SYNTAX HWPortType
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The interface type:
+ 1: Invalid
+ 2: PW interface
+ 3: L2 interface
+ 4: Encapsulation sub-interface
+ 5: Termination sub-interface
+ 6: Interface Board
+ 7: Vlanif Port
+ 11: Main-interface-bound-to-vsi
+ "
+ ::= { hwL2mcGroupCfgEntry 1 }
+
+hwGroupCfgPortIfIndex OBJECT-TYPE
+ SYNTAX InterfaceIndexOrZero
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The interface index. The value 0 indicates that the interface index is invalid."
+ ::= { hwL2mcGroupCfgEntry 2 }
+
+hwGroupCfgPortPeId OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The PE VID of an interface.
+ The value ranges from 1 to 4095.
+ The value 4095 indicates that the PE VID is invalid.
+ "
+ ::= { hwL2mcGroupCfgEntry 3 }
+
+hwGroupCfgPortCeId OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The CE VID of an interface.
+ The value ranges from 1 to 4095.
+ The value 4095 indicates that the CE VID is invalid.
+ "
+ ::= { hwL2mcGroupCfgEntry 4 }
+
+hwGroupCfgPeerAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The peer IP address of a PW interface. The value 0.0.0.0 indicates that the IP address is invalid."
+ ::= { hwL2mcGroupCfgEntry 5 }
+
+hwGroupCfgVcOrSiteId OBJECT-TYPE
+ SYNTAX Unsigned32(1..4294967295)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The VC ID or SITE ID of a PW interface."
+ ::= { hwL2mcGroupCfgEntry 6 }
+
+hwGroupCfgVlanIndex OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095.
+ The value ranges from 1 to 4095.
+ "
+ ::= { hwL2mcGroupCfgEntry 7 }
+
+hwGroupCfgVsiName OBJECT-TYPE
+ SYNTAX DisplayString(SIZE (0..31))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The name of a VSI. If a VLAN is specified, the value is 32."
+ ::= { hwL2mcGroupCfgEntry 8 }
+
+hwGroupCfgGroupAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The group address of a multicast group. In the case of MAC forwarding, the group address is the smallest of 32 IP addresses."
+ ::= { hwL2mcGroupCfgEntry 9 }
+
+hwGroupCfgSourceAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The source IP address of a multicast group."
+ ::= { hwL2mcGroupCfgEntry 10 }
+
+hwGroupCfgRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The row status."
+ ::= { hwL2mcGroupCfgEntry 100 }
+
+
+--
+-- The hwL2mcSsmSourceInfo group.
+--
+hwL2mcSsmSourceInfo
+ OBJECT IDENTIFIER ::= { hwIgspMibObject 7 }
+
+hwL2mcSsmSourceTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF HWL2mcSsmSourceEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table contains the configuration of the source address list of SSM-Mapping."
+ ::= { hwL2mcSsmSourceInfo 1 }
+
+hwL2mcSsmSourceEntry OBJECT-TYPE
+ SYNTAX HWL2mcSsmSourceEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry is created for each active VLAN or VSI in the device add an entry for SSM-Mapping."
+ INDEX { hwL2mcSsmSourceVlanIndex, hwL2mcSsmSourceVsiName,
+ hwL2mcSsmGroupAddress, hwL2mcSsmGroupLen, hwL2mcSsmSourceAddress
+ }
+ ::= { hwL2mcSsmSourceTable 1 }
+
+HWL2mcSsmSourceEntry ::= SEQUENCE {
+ hwL2mcSsmSourceVlanIndex VlanIdOrAny,
+ hwL2mcSsmSourceVsiName DisplayString,
+ hwL2mcSsmGroupAddress IpAddress,
+ hwL2mcSsmGroupLen Integer32,
+ hwL2mcSsmSourceAddress IpAddress,
+ hwL2mcSsmSourceRowStatus RowStatus
+ }
+
+hwL2mcSsmSourceVlanIndex OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095.
+ The value ranges from 1 to 4095.
+ "
+ ::= { hwL2mcSsmSourceEntry 1 }
+
+hwL2mcSsmSourceVsiName OBJECT-TYPE
+ SYNTAX DisplayString(SIZE (0..31))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The name of a VSI. If a VLAN is specified, the value is 32."
+ ::= { hwL2mcSsmSourceEntry 2 }
+
+hwL2mcSsmGroupAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The IP address of a multicast group. "
+ ::= { hwL2mcSsmSourceEntry 3 }
+
+hwL2mcSsmGroupLen OBJECT-TYPE
+ SYNTAX Integer32(4..32)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The mask length of a multicast group."
+ ::= { hwL2mcSsmSourceEntry 4 }
+
+hwL2mcSsmSourceAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The source address of SSM-Mapping, which serves as an index of this table."
+ ::= { hwL2mcSsmSourceEntry 5 }
+
+hwL2mcSsmSourceRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The row status."
+ ::= { hwL2mcSsmSourceEntry 100 }
+
+
+--
+-- The hwL2mcPortGroupPolicyCfgInfo group.
+--
+hwL2mcPortGroupPolicyCfgInfo
+ OBJECT IDENTIFIER ::= { hwIgspMibObject 8 }
+
+hwL2mcPortGroupPolicyCfgTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF HWL2mcPortGroupPolicyCfgEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "In this table, you can query or configure a group policy to filter entries on a port."
+ ::= { hwL2mcPortGroupPolicyCfgInfo 1 }
+
+hwL2mcPortGroupPolicyCfgEntry OBJECT-TYPE
+ SYNTAX HWL2mcPortGroupPolicyCfgEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry is created for each active VLAN or VSI in the device when a group policy added."
+ INDEX { hwPortGroupPolicyPortType, hwPortGroupPolicyPortIfIndex, hwPortGroupPolicyPortPeId, hwPortGroupPolicyPortCeId,
+ hwPortGroupPolicyPeerAddress, hwPortGroupPolicyVcOrSiteId,hwPortGroupPolicyVlanIndex, hwPortGroupPolicyVsiName
+ }
+ ::= { hwL2mcPortGroupPolicyCfgTable 1 }
+
+HWL2mcPortGroupPolicyCfgEntry ::= SEQUENCE {
+ hwPortGroupPolicyPortType HWPortType,
+ hwPortGroupPolicyPortIfIndex InterfaceIndexOrZero,
+ hwPortGroupPolicyPortPeId VlanIdOrAny,
+ hwPortGroupPolicyPortCeId VlanIdOrAny,
+ hwPortGroupPolicyPeerAddress IpAddress,
+ hwPortGroupPolicyVcOrSiteId Unsigned32,
+ hwPortGroupPolicyVlanIndex VlanIdOrAny,
+ hwPortGroupPolicyVsiName DisplayString,
+ hwPortGroupPolicyAclNum Integer32,
+ hwPortGroupPolicyIgmpVersion INTEGER,
+ hwPortGroupPolicyRowStatus RowStatus
+ }
+
+
+hwPortGroupPolicyPortType OBJECT-TYPE
+ SYNTAX HWPortType
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The interface type:
+ 1: Invalid
+ 2: PW interface
+ 3: L2 interface
+ 4: Encapsulation sub-interface
+ 5: Termination sub-interface
+ 6: Interface Board
+ 7: Vlanif Port
+ 9: batch config qinq port ce VLAN ID
+ 10: batch config dot1q termination port ce VLAN ID
+ 11: Main-interface-bound-to-vsi
+ "
+ ::= { hwL2mcPortGroupPolicyCfgEntry 1 }
+
+hwPortGroupPolicyPortIfIndex OBJECT-TYPE
+ SYNTAX InterfaceIndexOrZero
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The interface index. The value 0 indicates that the interface index is invalid."
+ ::= { hwL2mcPortGroupPolicyCfgEntry 2 }
+
+hwPortGroupPolicyPortPeId OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The PE VID of an interface.
+ The value ranges from 1 to 4095.
+ The value 4095 indicates that the PE VID is invalid.
+ "
+ ::= { hwL2mcPortGroupPolicyCfgEntry 3 }
+
+hwPortGroupPolicyPortCeId OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The CE VID of an interface.
+ The value ranges from 1 to 4095.
+ The value 4095 indicates that the CE VID is invalid.
+ "
+ ::= { hwL2mcPortGroupPolicyCfgEntry 4 }
+
+hwPortGroupPolicyPeerAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The peer IP address of a PW interface. The value 0.0.0.0 indicates that the IP address is invalid."
+ ::= { hwL2mcPortGroupPolicyCfgEntry 5 }
+
+hwPortGroupPolicyVcOrSiteId OBJECT-TYPE
+ SYNTAX Unsigned32(1..4294967295)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The VC ID or SITE ID of a PW interface."
+ ::= { hwL2mcPortGroupPolicyCfgEntry 6 }
+
+hwPortGroupPolicyVlanIndex OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095.
+ The value ranges from 1 to 4095.
+ "
+ ::= { hwL2mcPortGroupPolicyCfgEntry 7 }
+
+hwPortGroupPolicyVsiName OBJECT-TYPE
+ SYNTAX DisplayString(SIZE (0..31))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The name of a VSI. If a VLAN is specified, the value is 32."
+ ::= { hwL2mcPortGroupPolicyCfgEntry 8 }
+
+hwPortGroupPolicyAclNum OBJECT-TYPE
+ SYNTAX Integer32(0|2000..3999)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The number of a basic ACL.
+ The ACL number ranges from 2000 to 3999.
+ The default value is 0, indicating that the value is invalid.
+ "
+ ::= { hwL2mcPortGroupPolicyCfgEntry 9 }
+
+hwPortGroupPolicyIgmpVersion OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ version1(1),
+ version2(2),
+ version3(3),
+ versionAll(4)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The IGMP version.
+ The value ranges from 1 to 4.
+ The default is 4, indicating that no version is specified.
+ "
+ ::= { hwL2mcPortGroupPolicyCfgEntry 10 }
+
+hwPortGroupPolicyRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The row status."
+ ::= { hwL2mcPortGroupPolicyCfgEntry 100 }
+
+
+--
+-- The hwL2mcChnlCfgInfo group.
+--
+hwL2mcChnlCfgInfo
+ OBJECT IDENTIFIER ::= { hwIgspMibObject 9 }
+
+hwL2mcChnlCfgTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF HWL2mcChnlCfgEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table describes the configurations of a channel."
+ ::= { hwL2mcChnlCfgInfo 1 }
+
+hwL2mcChnlCfgEntry OBJECT-TYPE
+ SYNTAX HWL2mcChnlCfgEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry of channel is created for each VLAN or VSI in the device create an channel."
+ INDEX { hwChnlCfgVlanIndex, hwChnlCfgVsiName, hwChnlCfgChnlName
+ }
+ ::= { hwL2mcChnlCfgTable 1 }
+
+HWL2mcChnlCfgEntry ::= SEQUENCE {
+ hwChnlCfgVlanIndex VlanIdOrAny,
+ hwChnlCfgVsiName DisplayString,
+ hwChnlCfgChnlName DisplayString,
+ hwChnlCfgChnlType INTEGER,
+ hwChnlCfgRowStatus RowStatus
+ }
+
+hwChnlCfgVlanIndex OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The VLAN ID, which is the configuration index in a VLAN.
+ If a VSI is specified, the value is 4095. If both hwChnlCfgVlanIndex and hwChnlCfgVSIName are invalid, the configuration is global.
+ The value ranges from 1 to 4095.
+ "
+ ::= { hwL2mcChnlCfgEntry 1 }
+
+hwChnlCfgVsiName OBJECT-TYPE
+ SYNTAX DisplayString(SIZE (0..31))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The name of a VSI.
+ If a VLAN is specified, the value is 32. If both hwChnlCfgVlanIndex and hwChnlCfgVSIName are invalid, the configuration is global."
+ ::= { hwL2mcChnlCfgEntry 2 }
+
+hwChnlCfgChnlName OBJECT-TYPE
+ SYNTAX DisplayString(SIZE (0..31))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The channel name."
+ ::= { hwL2mcChnlCfgEntry 3 }
+
+hwChnlCfgChnlType OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ ssm(1),
+ asm(2)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The channel type:
+ 1: SSM
+ 2: ASM
+ "
+ ::= { hwL2mcChnlCfgEntry 9 }
+
+
+
+hwChnlCfgRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The row status."
+ ::= { hwL2mcChnlCfgEntry 100 }
+
+
+--
+-- The hwL2mcLimitInfo group.
+--
+hwL2mcLimitInfo
+ OBJECT IDENTIFIER ::= { hwIgspMibObject 10 }
+
+hwL2mcLimitTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF HWL2mcLimitEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table describes the configurations of IGMP snooping CAC in a VLAN or a VSI."
+ ::= { hwL2mcLimitInfo 1 }
+
+hwL2mcLimitEntry OBJECT-TYPE
+ SYNTAX HWL2mcLimitEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry is created for each IGMP snooping CAC in a VLAN or a VSI."
+ INDEX { hwL2mcLimitVlanIndex, hwL2mcLimitVsiName, hwL2mcLimitChnlName }
+ ::= { hwL2mcLimitTable 1 }
+
+HWL2mcLimitEntry ::= SEQUENCE {
+ hwL2mcLimitVlanIndex VlanIdOrAny,
+ hwL2mcLimitVsiName DisplayString,
+ hwL2mcLimitChnlName DisplayString,
+ hwL2mcLimitMaxEntry Integer32,
+ hwL2mcLimitEntryCnt Counter32,
+ hwL2mcLimitMaxBandWidth Integer32,
+ hwL2mcLimitBandWidth Counter32,
+ hwL2mcLimitAcl Integer32,
+ hwL2mcLimitCfgRowStatus RowStatus
+ }
+
+hwL2mcLimitVlanIndex OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The VLAN ID, which is the configuration index in a VLAN.
+ If a VSI is specified, the value is 4095. If both hwVlanLimitVlanIndex and hwVlanLimitVSIName are invalid, the configuration is global.
+ The value ranges from 1 to 4095.
+ "
+ ::= { hwL2mcLimitEntry 1 }
+
+hwL2mcLimitVsiName OBJECT-TYPE
+ SYNTAX DisplayString(SIZE (0..31))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The name of a VSI. If a VLAN is specified, the value is 32.
+ If both hwVlanLimitVlanIndex and hwVlanLimitVSIName are invalid, the configuration is global."
+ ::= { hwL2mcLimitEntry 2 }
+
+hwL2mcLimitChnlName OBJECT-TYPE
+ SYNTAX DisplayString(SIZE (0..31))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The channel name."
+ ::= { hwL2mcLimitEntry 3 }
+
+hwL2mcLimitMaxEntry OBJECT-TYPE
+ SYNTAX Integer32(0..16384)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The maximum number of forwarding entries. The value 0 indicates that the number is invalid."
+ ::= { hwL2mcLimitEntry 4 }
+
+hwL2mcLimitEntryCnt OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of current forwarding entries."
+ ::= { hwL2mcLimitEntry 5 }
+
+hwL2mcLimitMaxBandWidth OBJECT-TYPE
+ SYNTAX Integer32(0..10000000)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The maximum bandwidth. The value 0 indicates that the bandwidth is invalid."
+ ::= { hwL2mcLimitEntry 6 }
+
+hwL2mcLimitBandWidth OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The current bandwidth."
+ ::= { hwL2mcLimitEntry 7 }
+
+hwL2mcLimitAcl OBJECT-TYPE
+ SYNTAX Integer32(0|2000..3999)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The number of ACL for the multicast groups that do not need to be configured with CAC limit.
+ The ACL number ranges from 2000 to 3999.
+ The default value is 0, indicating that the number is invalid.
+ "
+ ::= { hwL2mcLimitEntry 8 }
+
+hwL2mcLimitCfgRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The row status."
+ ::= { hwL2mcLimitEntry 100 }
+
+hwL2mcLimitGroupTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF HwL2mcLimitGroupEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { hwL2mcLimitInfo 2 }
+
+hwL2mcLimitGroupEntry OBJECT-TYPE
+ SYNTAX HwL2mcLimitGroupEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Description."
+ INDEX { hwL2mcLimitGroupIndex }
+ ::= { hwL2mcLimitGroupTable 1 }
+
+HwL2mcLimitGroupEntry ::=
+ SEQUENCE {
+ hwL2mcLimitGroupIndex
+ Unsigned32,
+ hwL2mcLimitGroupStartAddr
+ IpAddress,
+ hwL2mcLimitGroupEndAddr
+ IpAddress,
+ hwL2mcLimitGroupBandwidth
+ Unsigned32
+ }
+
+hwL2mcLimitGroupIndex OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { hwL2mcLimitGroupEntry 1 }
+
+hwL2mcLimitGroupStartAddr OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { hwL2mcLimitGroupEntry 2 }
+
+hwL2mcLimitGroupEndAddr OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { hwL2mcLimitGroupEntry 3 }
+
+hwL2mcLimitGroupBandwidth OBJECT-TYPE
+ SYNTAX Unsigned32 (1..100000)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { hwL2mcLimitGroupEntry 4 }
+--
+-- The hwL2mcPortLimitInfo group.
+--
+hwL2mcPortLimitInfo
+ OBJECT IDENTIFIER ::= { hwIgspMibObject 11 }
+
+hwL2mcPortLimitTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF HWL2mcPortLimitEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table describes the configurations of IGMP snooping CAC on an interface."
+ ::= { hwL2mcPortLimitInfo 1 }
+
+hwL2mcPortLimitEntry OBJECT-TYPE
+ SYNTAX HWL2mcPortLimitEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry is created for each IGMP snooping CAC on an interface."
+ INDEX { hwPortLimitVlanIndex, hwPortLimitVsiName, hwPortLimitPortType,
+ hwPortLimitIfIndex, hwPortLimitPeId, hwPortLimitCeId,
+ hwPortLimitPeerAddress, hwPortLimitVcOrSiteId, hwPortLimitChnlName }
+ ::= { hwL2mcPortLimitTable 1 }
+
+HWL2mcPortLimitEntry ::= SEQUENCE {
+ hwPortLimitVlanIndex VlanIdOrAny,
+ hwPortLimitVsiName DisplayString,
+ hwPortLimitPortType HWPortType,
+ hwPortLimitIfIndex InterfaceIndexOrZero,
+ hwPortLimitPeId VlanIdOrAny,
+ hwPortLimitCeId VlanIdOrAny,
+ hwPortLimitPeerAddress IpAddress,
+ hwPortLimitVcOrSiteId Unsigned32,
+ hwPortLimitChnlName DisplayString,
+ hwPortLimitAcl Integer32,
+ hwPortLimitMaxEntry Integer32,
+ hwPortLimitEntryCnt Counter32,
+ hwPortLimitMaxBandWidth Integer32,
+ hwPortLimitBandWidth Counter32,
+ hwPortLimitCfgRowStatus RowStatus
+ }
+
+
+hwPortLimitVlanIndex OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095.
+ The value ranges from 1 to 4095.
+ "
+ ::= { hwL2mcPortLimitEntry 1 }
+
+hwPortLimitVsiName OBJECT-TYPE
+ SYNTAX DisplayString(SIZE (0..31))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The name of a VSI. If a VLAN is specified, the value is 32."
+ ::= { hwL2mcPortLimitEntry 2 }
+
+hwPortLimitPortType OBJECT-TYPE
+ SYNTAX HWPortType
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The interface type:
+ 1: Invalid
+ 2: PW interface
+ 3: L2 interface
+ 4: Encapsulation sub-interface
+ 5: Termination sub-interface
+ 9: batch config qinq port ce VLAN ID
+ 10: batch config dot1q termination port ce VLAN ID
+ "
+ ::= { hwL2mcPortLimitEntry 3 }
+
+hwPortLimitIfIndex OBJECT-TYPE
+ SYNTAX InterfaceIndexOrZero
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The interface index. The value 0 indicates that the interface index is invalid."
+ ::= { hwL2mcPortLimitEntry 4 }
+
+hwPortLimitPeId OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The PE VID of an interface.
+ The value ranges from 1 to 4095.
+ The value 4095 indicates that the PE VID is invalid.
+ "
+ ::= { hwL2mcPortLimitEntry 5 }
+
+hwPortLimitCeId OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The CE VID of an interface.
+ The value ranges from 1 to 4095.
+ The value 4095 indicates that the CE VID is invalid.
+ "
+ ::= { hwL2mcPortLimitEntry 6 }
+
+hwPortLimitPeerAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The peer IP address of a PW interface. The value 0.0.0.0 indicates that the IP address is invalid."
+ ::= { hwL2mcPortLimitEntry 7 }
+
+hwPortLimitVcOrSiteId OBJECT-TYPE
+ SYNTAX Unsigned32(1..4294967295)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The VC ID or SITE ID of a PW interface."
+ ::= { hwL2mcPortLimitEntry 8 }
+
+hwPortLimitChnlName OBJECT-TYPE
+ SYNTAX DisplayString(SIZE (0..31))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The channel name."
+ ::= { hwL2mcPortLimitEntry 9 }
+
+hwPortLimitAcl OBJECT-TYPE
+ SYNTAX Integer32(0|2000..3999)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The number of ACL for the multicast groups that do not need to be configured with CAC limit.
+ The ACL number ranges from 2000 to 3999.
+ The default value is 0, indicating that the number is invalid.
+ "
+ ::= { hwL2mcPortLimitEntry 10 }
+
+hwPortLimitMaxEntry OBJECT-TYPE
+ SYNTAX Integer32(0..16384)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The maximum number of forwarding entries. The value 0 indicates that the number is invalid."
+ ::= { hwL2mcPortLimitEntry 11 }
+
+hwPortLimitEntryCnt OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of current forwarding entries."
+ ::= { hwL2mcPortLimitEntry 12 }
+
+hwPortLimitMaxBandWidth OBJECT-TYPE
+ SYNTAX Integer32(0..4194304)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The maximum bandwidth. The value 0 indicates that the bandwidth is invalid."
+ ::= { hwL2mcPortLimitEntry 13 }
+
+hwPortLimitBandWidth OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The current bandwidth."
+ ::= { hwL2mcPortLimitEntry 14 }
+
+hwPortLimitCfgRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The row status."
+ ::= { hwL2mcPortLimitEntry 100 }
+
+
+
+--
+-- The hwL2mcFastChnlCfgInfo group.
+--
+hwL2mcFastChnlCfgInfo
+ OBJECT IDENTIFIER ::= { hwIgspMibObject 12 }
+
+hwL2mcFastChnlCfgTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF HWL2mcFastChnlCfgEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table contains l2 multicast fast forward information for IGMP Snooping."
+ ::= { hwL2mcFastChnlCfgInfo 1 }
+
+hwL2mcFastChnlCfgEntry OBJECT-TYPE
+ SYNTAX HWL2mcFastChnlCfgEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry is created for each IGMP snooping fast channel."
+ INDEX { hwL2mcFastChnlCfgVlanIndex, hwL2mcFastChnlCfgVsiName,
+ hwL2mcFastChnlCfgGroupAddress, hwL2mcFastChnlCfgGroupLen,
+ hwL2mcFastChnlCfgSourceAddress, hwL2mcFastChnlCfgSourceLen
+ }
+ ::= { hwL2mcFastChnlCfgTable 1 }
+
+HWL2mcFastChnlCfgEntry ::= SEQUENCE {
+ hwL2mcFastChnlCfgVlanIndex VlanIdOrAny,
+ hwL2mcFastChnlCfgVsiName DisplayString,
+ hwL2mcFastChnlCfgGroupAddress IpAddress,
+ hwL2mcFastChnlCfgGroupLen Integer32,
+ hwL2mcFastChnlCfgSourceAddress IpAddress ,
+ hwL2mcFastChnlCfgSourceLen Integer32 ,
+ hwL2mcFastChnlCfgRowStatus RowStatus
+ }
+
+hwL2mcFastChnlCfgVlanIndex OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095.
+ The value ranges from 1 to 4095.
+ "
+ ::= { hwL2mcFastChnlCfgEntry 1 }
+
+hwL2mcFastChnlCfgVsiName OBJECT-TYPE
+ SYNTAX DisplayString(SIZE (0..31))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The name of a VSI. If a VLAN is specified, the value is 32."
+ ::= { hwL2mcFastChnlCfgEntry 2 }
+
+hwL2mcFastChnlCfgGroupAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The group address of a multicast group. In the case of MAC forwarding, the group address is the smallest of 32 IP addresses."
+ ::= { hwL2mcFastChnlCfgEntry 3 }
+
+hwL2mcFastChnlCfgGroupLen OBJECT-TYPE
+ SYNTAX Integer32(16..32)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The mask length of a multicast group address."
+ ::= { hwL2mcFastChnlCfgEntry 4 }
+
+hwL2mcFastChnlCfgSourceAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The source IP address of a multicast group."
+ ::= { hwL2mcFastChnlCfgEntry 5 }
+
+hwL2mcFastChnlCfgSourceLen OBJECT-TYPE
+ SYNTAX Integer32(0|16..32)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The mask length of a multicast source address."
+ ::= { hwL2mcFastChnlCfgEntry 6 }
+
+hwL2mcFastChnlCfgRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The row status."
+ ::= { hwL2mcFastChnlCfgEntry 100 }
+
+
+--
+-- The hwL2mcRouterPortInfo group.
+--
+hwL2mcRouterPortInfo
+ OBJECT IDENTIFIER ::= { hwIgspMibObject 13 }
+
+hwL2mcRouterPortInfoTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF HWL2mcRouterPortInfoEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table contains l2 multicast router port information for IGMP Snooping."
+ ::= { hwL2mcRouterPortInfo 1 }
+
+hwL2mcRouterPortInfoEntry OBJECT-TYPE
+ SYNTAX HWL2mcRouterPortInfoEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry is created for each IGMP snooping router port on an interface."
+ INDEX { hwL2mcRouterPortVlanIndex, hwL2mcRouterPortVsiName, hwL2mcRouterPortType, hwL2mcRouterPortIfIndex,
+ hwL2mcRouterPortPeId, hwL2mcRouterPortCeId, hwL2mcRouterPortPeerAddress, hwL2mcRouterPortVcOrSiteId }
+ ::= { hwL2mcRouterPortInfoTable 1 }
+
+HWL2mcRouterPortInfoEntry ::= SEQUENCE {
+ hwL2mcRouterPortVlanIndex VlanIdOrAny,
+ hwL2mcRouterPortVsiName DisplayString,
+ hwL2mcRouterPortType HWPortType ,
+ hwL2mcRouterPortIfIndex InterfaceIndexOrZero ,
+ hwL2mcRouterPortPeId VlanIdOrAny,
+ hwL2mcRouterPortCeId VlanIdOrAny,
+ hwL2mcRouterPortPeerAddress IpAddress,
+ hwL2mcRouterPortVcOrSiteId Unsigned32,
+ hwL2mcRouterPortGroupUpTime Counter32,
+ hwL2mcRouterPortGroupExpires Counter32,
+ hwL2mcRouterPortGroupHostFlag1 INTEGER
+ }
+
+hwL2mcRouterPortVlanIndex OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095.
+ The value ranges from 1 to 4095.
+ "
+ ::= { hwL2mcRouterPortInfoEntry 1 }
+
+hwL2mcRouterPortVsiName OBJECT-TYPE
+ SYNTAX DisplayString(SIZE (0..31))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The name of a VSI. If a VLAN is specified, the value is 32."
+ ::= { hwL2mcRouterPortInfoEntry 2 }
+
+hwL2mcRouterPortType OBJECT-TYPE
+ SYNTAX HWPortType
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The interface type:
+ 1: Invalid
+ 2: PW interface
+ 3: L2 interface
+ 4: Encapsulation sub-interface
+ 5: Termination sub-interface
+ 6: Interface Board
+ 7: Vlanif Port
+ 11: Main-interface-bound-to-vsi
+ "
+ ::= { hwL2mcRouterPortInfoEntry 3 }
+
+hwL2mcRouterPortIfIndex OBJECT-TYPE
+ SYNTAX InterfaceIndexOrZero
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The interface index. The value 0 indicates that the interface index is invalid."
+ ::= { hwL2mcRouterPortInfoEntry 4 }
+
+hwL2mcRouterPortPeId OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The PE VID of an interface.
+ The value ranges from 1 to 4095.
+ The value 4095 indicates that the PE VID is invalid.
+ "
+ ::= { hwL2mcRouterPortInfoEntry 5 }
+
+hwL2mcRouterPortCeId OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The CE VID of an interface.
+ The value ranges from 1 to 4095.
+ The value 4095 indicates that the CE VID is invalid.
+ "
+ ::= { hwL2mcRouterPortInfoEntry 6 }
+
+hwL2mcRouterPortPeerAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The peer IP address of a PW interface. The value 0.0.0.0 indicates that the IP address is invalid."
+ ::= { hwL2mcRouterPortInfoEntry 7 }
+
+hwL2mcRouterPortVcOrSiteId OBJECT-TYPE
+ SYNTAX Unsigned32(1..4294967295)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The VC ID or SITE ID of a PW interface."
+ ::= { hwL2mcRouterPortInfoEntry 8 }
+
+hwL2mcRouterPortGroupUpTime OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "How long the group exists in the forwarding entry."
+ ::= { hwL2mcRouterPortInfoEntry 16 }
+
+hwL2mcRouterPortGroupExpires OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The timeout period of the router port, that is, the aging time of the router port."
+ ::= { hwL2mcRouterPortInfoEntry 17 }
+
+hwL2mcRouterPortGroupHostFlag1 OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ static(1),
+ dynamic(2),
+ staticDynamic(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The mode to create an interface on the host:
+ 1: static
+ 2: dynamic
+ 3: static and dynamic
+ "
+ ::= { hwL2mcRouterPortInfoEntry 19 }
+
+
+
+--
+--
+-- The hwL2mcRouterPortCfgInfo group.
+--
+hwL2mcRouterPortCfgInfo
+ OBJECT IDENTIFIER ::= { hwIgspMibObject 14 }
+
+hwL2mcRouterPortCfgTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF HWL2mcRouterPortCfgEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table contains l2 multicast configuration of router port for IGMP Snooping."
+ ::= { hwL2mcRouterPortCfgInfo 1 }
+
+hwL2mcRouterPortCfgEntry OBJECT-TYPE
+ SYNTAX HWL2mcRouterPortCfgEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry is created for each IGMP snooping static router port on an interface."
+ INDEX { hwL2mcRouterPortCfgPortType, hwL2mcRouterPortCfgPortIfIndex, hwL2mcRouterPortCfgPortPeId , hwL2mcRouterPortCfgPortCeId ,
+ hwL2mcRouterPortCfgPeerAddress , hwL2mcRouterPortCfgVcOrSiteId, hwL2mcRouterPortCfgVlanIndex, hwL2mcRouterPortCfgVsiName }
+ ::= { hwL2mcRouterPortCfgTable 1 }
+
+HWL2mcRouterPortCfgEntry ::= SEQUENCE {
+ hwL2mcRouterPortCfgPortType HWPortType ,
+ hwL2mcRouterPortCfgPortIfIndex InterfaceIndexOrZero ,
+ hwL2mcRouterPortCfgPortPeId VlanIdOrAny,
+ hwL2mcRouterPortCfgPortCeId VlanIdOrAny,
+ hwL2mcRouterPortCfgPeerAddress IpAddress,
+ hwL2mcRouterPortCfgVcOrSiteId Unsigned32,
+ hwL2mcRouterPortCfgVlanIndex VlanIdOrAny,
+ hwL2mcRouterPortCfgVsiName DisplayString,
+ hwL2mcRouterPortCfgRowStatus RowStatus
+ }
+
+hwL2mcRouterPortCfgPortType OBJECT-TYPE
+ SYNTAX HWPortType
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The interface type:
+ 1: Invalid
+ 2: PW interface
+ 3: L2 interface
+ 4: Encapsulation sub-interface
+ 5: Termination sub-interface
+ 6: Interface Board
+ 7: Vlanif Port
+ 11: Main-interface-bound-to-vsi
+ "
+ ::= { hwL2mcRouterPortCfgEntry 1 }
+
+hwL2mcRouterPortCfgPortIfIndex OBJECT-TYPE
+ SYNTAX InterfaceIndexOrZero
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The interface index. The value 0 indicates that the interface index is invalid."
+ ::= { hwL2mcRouterPortCfgEntry 2 }
+
+hwL2mcRouterPortCfgPortPeId OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The PE VID of an interface.
+ The value ranges from 1 to 4095.
+ The value 4095 indicates that the PE VID is invalid.
+ "
+ ::= { hwL2mcRouterPortCfgEntry 3 }
+
+hwL2mcRouterPortCfgPortCeId OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The CE VID of an interface.
+ The value ranges from 1 to 4095.
+ The value 4095 indicates that the CE VID is invalid.
+ "
+ ::= { hwL2mcRouterPortCfgEntry 4 }
+
+hwL2mcRouterPortCfgPeerAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The peer IP address of a PW interface. The value 0.0.0.0 indicates that the IP address is invalid."
+ ::= { hwL2mcRouterPortCfgEntry 5 }
+
+hwL2mcRouterPortCfgVcOrSiteId OBJECT-TYPE
+ SYNTAX Unsigned32(1..4294967295)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The VC ID or SITE ID of a PW interface."
+ ::= { hwL2mcRouterPortCfgEntry 6 }
+
+hwL2mcRouterPortCfgVlanIndex OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095.
+ The value ranges from 1 to 4095.
+ "
+ ::= { hwL2mcRouterPortCfgEntry 7 }
+
+hwL2mcRouterPortCfgVsiName OBJECT-TYPE
+ SYNTAX DisplayString(SIZE (0..31))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The name of a VSI. If a VLAN is specified, the value is 32."
+ ::= { hwL2mcRouterPortCfgEntry 8 }
+
+hwL2mcRouterPortCfgRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The row status."
+ ::= { hwL2mcRouterPortCfgEntry 100 }
+
+
+--
+-- The hwL2mcChnlGroupCfgInfo group.
+--
+hwL2mcChnlGroupCfgInfo
+ OBJECT IDENTIFIER ::= { hwIgspMibObject 15 }
+
+hwL2mcChnlGroupCfgTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF HWL2mcChnlGroupCfgEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table describes the group configurations of a channel."
+ ::= { hwL2mcChnlGroupCfgInfo 1 }
+
+hwL2mcChnlGroupCfgEntry OBJECT-TYPE
+ SYNTAX HWL2mcChnlGroupCfgEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry of channel is created for each VLAN or VSI in the device create an channel."
+ INDEX { hwChnlGroupCfgVlanIndex , hwChnlGroupCfgVsiName , hwChnlCfgGroupChnlName, hwChnlGroupCfgGroupAddress ,
+ hwChnlGroupCfgGroupLen, hwChnlGroupCfgSourceAddress , hwChnlGroupCfgSourceLen
+ }
+ ::= { hwL2mcChnlGroupCfgTable 1 }
+
+HWL2mcChnlGroupCfgEntry ::= SEQUENCE {
+ hwChnlGroupCfgVlanIndex VlanIdOrAny,
+ hwChnlGroupCfgVsiName DisplayString,
+ hwChnlCfgGroupChnlName DisplayString,
+ hwChnlGroupCfgGroupAddress IpAddress,
+ hwChnlGroupCfgGroupLen Integer32,
+ hwChnlGroupCfgSourceAddress IpAddress,
+ hwChnlGroupCfgSourceLen Integer32,
+ hwChnlGroupCfgPerBand Integer32,
+ hwChnlGroupCfgRowStatus RowStatus
+ }
+
+hwChnlGroupCfgVlanIndex OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The VLAN ID, which is the configuration index in a VLAN.
+ If a VSI is specified, the value is 4095. If both hwChnlCfgVlanIndex and hwChnlCfgVSIName are invalid, the configuration is global.
+ The value ranges from 1 to 4095.
+ "
+ ::= { hwL2mcChnlGroupCfgEntry 1 }
+
+hwChnlGroupCfgVsiName OBJECT-TYPE
+ SYNTAX DisplayString(SIZE (0..31))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The name of a VSI.
+ If a VLAN is specified, the value is 32. If both hwChnlCfgVlanIndex and hwChnlCfgVSIName are invalid, the configuration is global."
+ ::= { hwL2mcChnlGroupCfgEntry 2 }
+
+hwChnlCfgGroupChnlName OBJECT-TYPE
+ SYNTAX DisplayString(SIZE (0..31))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The channel name."
+ ::= { hwL2mcChnlGroupCfgEntry 3 }
+
+
+hwChnlGroupCfgGroupAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The group address of a multicast group. In the case of MAC forwarding, the group address is the smallest of 32 IP addresses."
+ ::= { hwL2mcChnlGroupCfgEntry 4 }
+
+
+hwChnlGroupCfgGroupLen OBJECT-TYPE
+ SYNTAX Integer32(4..32)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The mask length of a multicast group."
+ ::= { hwL2mcChnlGroupCfgEntry 5 }
+
+hwChnlGroupCfgSourceAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The source IP address of a multicast group."
+ ::= { hwL2mcChnlGroupCfgEntry 6 }
+
+hwChnlGroupCfgSourceLen OBJECT-TYPE
+ SYNTAX Integer32(0|8..32)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The mask length of a multicast source address."
+ ::= { hwL2mcChnlGroupCfgEntry 7 }
+
+hwChnlGroupCfgPerBand OBJECT-TYPE
+ SYNTAX Integer32(0..131072)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The bandwidth of a multicast group."
+ ::= { hwL2mcChnlGroupCfgEntry 9 }
+
+hwChnlGroupCfgRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The row status."
+ ::= { hwL2mcChnlGroupCfgEntry 100 }
+
+
+--
+-- The hwL2mcGroupPolicyCfgInfo group.
+--
+hwL2mcGroupPolicyCfgInfo
+ OBJECT IDENTIFIER ::= { hwIgspMibObject 16 }
+
+hwL2mcGroupPolicyCfgTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF HWL2mcGroupPolicyCfgEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "In this table, you can query or configure a group policy to filter entries on a port."
+ ::= { hwL2mcGroupPolicyCfgInfo 1 }
+
+hwL2mcGroupPolicyCfgEntry OBJECT-TYPE
+ SYNTAX HWL2mcGroupPolicyCfgEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry is created for each active VLAN or VSI in the device when a group policy added."
+ INDEX { hwGroupPolicyVlanIndex, hwGroupPolicyVsiName
+ }
+ ::= { hwL2mcGroupPolicyCfgTable 1 }
+
+HWL2mcGroupPolicyCfgEntry ::= SEQUENCE {
+ hwGroupPolicyVlanIndex VlanIdOrAny,
+ hwGroupPolicyVsiName DisplayString,
+ hwGroupPolicyAclNum Integer32,
+ hwGroupPolicyIgmpVersion INTEGER,
+ hwGroupPolicyRowStatus RowStatus
+ }
+
+hwGroupPolicyVlanIndex OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095.
+ The value ranges from 1 to 4095.
+ "
+ ::= { hwL2mcGroupPolicyCfgEntry 1 }
+
+hwGroupPolicyVsiName OBJECT-TYPE
+ SYNTAX DisplayString(SIZE (0..31))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The name of a VSI. If a VLAN is specified, the value is 32."
+ ::= { hwL2mcGroupPolicyCfgEntry 2 }
+
+
+hwGroupPolicyAclNum OBJECT-TYPE
+ SYNTAX Integer32(0|2000..3999)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The number of a basic ACL.
+ The ACL number ranges from 2000 to 3999.
+ The default value is 0, indicating that the value is invalid.
+ "
+ ::= { hwL2mcGroupPolicyCfgEntry 3 }
+
+hwGroupPolicyIgmpVersion OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ version1(1),
+ version2(2),
+ version3(3),
+ versionAll(4)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The IGMP version.
+ The value ranges from 1 to 4.
+ The default is 4, indicating that no version is specified.
+ "
+ ::= { hwL2mcGroupPolicyCfgEntry 4 }
+
+hwGroupPolicyRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The row status."
+ ::= { hwL2mcGroupPolicyCfgEntry 100 }
+
+--
+-- The hwL2mcChnlDenyCfgInfo group.
+--
+hwL2mcChnlDenyCfgInfo
+ OBJECT IDENTIFIER ::= { hwIgspMibObject 17 }
+
+hwL2mcChnlDenyCfgTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF HWL2mcChnlDenyCfgEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table describes the configurations of deny unspecified group for each VLAN or VSI, or in global."
+ ::= { hwL2mcChnlDenyCfgInfo 1 }
+
+hwL2mcChnlDenyCfgEntry OBJECT-TYPE
+ SYNTAX HWL2mcChnlDenyCfgEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry of channel deny is created for each VLAN or VSI in the device create an channel."
+ INDEX { hwChnlDenyCfgVlanIndex, hwChnlDenyCfgVsiName
+ }
+ ::= { hwL2mcChnlDenyCfgTable 1 }
+
+HWL2mcChnlDenyCfgEntry ::= SEQUENCE {
+ hwChnlDenyCfgVlanIndex VlanIdOrAny,
+ hwChnlDenyCfgVsiName DisplayString,
+ hwChnlDenyCfg INTEGER,
+ hwChnlDenyCfgRowStatus RowStatus
+ }
+
+hwChnlDenyCfgVlanIndex OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The VLAN ID, which is the configuration index in a VLAN.
+ If a VSI is specified, the value is 4095. If both hwChnlCfgVlanIndex and hwChnlCfgVSIName are invalid, the configuration is global.
+ The value ranges from 1 to 4095.
+ "
+ ::= { hwL2mcChnlDenyCfgEntry 1 }
+
+hwChnlDenyCfgVsiName OBJECT-TYPE
+ SYNTAX DisplayString(SIZE (0..31))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The name of a VSI.
+ If a VLAN is specified, the value is 32. If both hwChnlCfgVlanIndex and hwChnlCfgVSIName are invalid, the configuration is global."
+ ::= { hwL2mcChnlDenyCfgEntry 2 }
+
+
+hwChnlDenyCfg OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ forward(1),
+ discard(2)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Whether discard unspecified channel:
+ 1: not discard
+ 2: discard
+ "
+ ::= { hwL2mcChnlDenyCfgEntry 3 }
+
+
+hwChnlDenyCfgRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The row status."
+ ::= { hwL2mcChnlDenyCfgEntry 100 }
+
+
+--
+-- The hwL2mcQinQPortTable group.
+--
+hwL2mcQinQPortInfo
+ OBJECT IDENTIFIER ::= { hwIgspMibObject 18 }
+
+hwL2mcQinQPortTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF HWL2mcQinQPortEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table describes the specific port statistic of QinQ table of protol."
+ ::= { hwL2mcQinQPortInfo 1 }
+
+hwL2mcQinQPortEntry OBJECT-TYPE
+ SYNTAX HWL2mcQinQPortEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry of the specific port statistic of QinQ table of protol."
+ INDEX { hwQinQPortVlanIndex, hwQinQPortVsiName, hwL2mcQinQPortIfIndex, hwQinQPortGroupAddr,
+ hwQinQPortSourceAddr, hwQinQPortPe, hwQinQPortCe
+ }
+ ::= { hwL2mcQinQPortTable 1 }
+
+HWL2mcQinQPortEntry ::= SEQUENCE {
+ hwQinQPortVlanIndex VlanIdOrAny,
+ hwQinQPortVsiName DisplayString,
+ hwL2mcQinQPortIfIndex InterfaceIndexOrZero,
+ hwQinQPortGroupAddr IpAddress,
+ hwQinQPortSourceAddr IpAddress,
+ hwQinQPortPe VlanIdOrAny,
+ hwQinQPortCe VlanIdOrAny,
+ hwQinQPortTime Counter32,
+ hwQinQPortFlag Integer32
+ }
+
+hwQinQPortVlanIndex OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The VLAN ID, which is the configuration index in a VLAN.
+ If a VSI is specified, the value is 4095. If both hwChnlCfgVlanIndex and hwChnlCfgVSIName are invalid, the configuration is global.
+ The value ranges from 1 to 4095.
+ "
+ ::= { hwL2mcQinQPortEntry 1 }
+
+hwQinQPortVsiName OBJECT-TYPE
+ SYNTAX DisplayString(SIZE (0..31))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The name of a VSI.
+ If a VLAN is specified, the value is 32. If both hwChnlCfgVlanIndex and hwChnlCfgVSIName are invalid, the configuration is global."
+ ::= { hwL2mcQinQPortEntry 2 }
+
+hwL2mcQinQPortIfIndex OBJECT-TYPE
+ SYNTAX InterfaceIndexOrZero
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The interface index. The value 0 indicates that the interface index is invalid."
+ ::= { hwL2mcQinQPortEntry 3 }
+
+hwQinQPortGroupAddr OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The group address of a multicast group. In the case of MAC forwarding, the group address is the smallest of 32 IP addresses."
+ ::= { hwL2mcQinQPortEntry 4 }
+
+hwQinQPortSourceAddr OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The source IP address of a multicast group."
+ ::= { hwL2mcQinQPortEntry 5 }
+
+hwQinQPortPe OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The PE VID of an interface.
+ The value ranges from 1 to 4095.
+ The value 4095 indicates that the PE VID is invalid.
+ "
+ ::= { hwL2mcQinQPortEntry 6 }
+
+hwQinQPortCe OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The CE VID of an interface.
+ The value ranges from 1 to 4095.
+ The value 4095 indicates that the CE VID is invalid.
+ "
+ ::= { hwL2mcQinQPortEntry 7 }
+
+hwQinQPortTime OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of QinQ Port entry live time in second."
+ ::= { hwL2mcQinQPortEntry 20 }
+
+hwQinQPortFlag OBJECT-TYPE
+ SYNTAX Integer32(1..4)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The port flag:
+ 1 static
+ 2 dynamic
+ 3 static and dynamic
+ 4 invalid
+ "
+ ::= { hwL2mcQinQPortEntry 21 }
+
+--
+-- The hwL2mcETrackingInfoTable group.
+--
+hwL2mcETrackingInfoInfo
+ OBJECT IDENTIFIER ::= { hwIgspMibObject 19 }
+
+hwL2mcETrackingInfoTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF HWL2mcETrackingInfoEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table describes the host explicit tracking."
+ ::= { hwL2mcETrackingInfoInfo 1 }
+
+hwL2mcETrackingInfoEntry OBJECT-TYPE
+ SYNTAX HWL2mcETrackingInfoEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry of the host explicit tracking."
+ INDEX { hwETrackInfoSlotIndex, hwETrackInfoVlanIndex, hwETrackInfoVsiName, hwETrackInfoGroupAddr, hwETrackInfoSourceAddr,
+ hwETrackInfoPortType, hwETrackInfoPortIfIndex, hwETrackInfoPortPeId, hwETrackInfoPortCeId,
+ hwETrackInfoPeerAddress, hwETrackInfoVcOrSiteId,hwETrackInfoBoardNum, hwETrackInfoReportAddr
+ }
+ ::= { hwL2mcETrackingInfoTable 1 }
+
+HWL2mcETrackingInfoEntry ::= SEQUENCE {
+ hwETrackInfoSlotIndex Integer32,
+ hwETrackInfoVlanIndex VlanIdOrAny,
+ hwETrackInfoVsiName DisplayString,
+ hwETrackInfoGroupAddr IpAddress,
+ hwETrackInfoSourceAddr IpAddress,
+ hwETrackInfoPortType HWPortType,
+ hwETrackInfoPortIfIndex InterfaceIndexOrZero,
+ hwETrackInfoPortPeId VlanIdOrAny,
+ hwETrackInfoPortCeId VlanIdOrAny,
+ hwETrackInfoPeerAddress IpAddress,
+ hwETrackInfoVcOrSiteId Unsigned32,
+ hwETrackInfoBoardNum Integer32,
+ hwETrackInfoReportAddr IpAddress,
+ hwETrackInfoFlag Integer32
+ }
+
+hwETrackInfoSlotIndex OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The slot index, which is interface board number. "
+ ::= { hwL2mcETrackingInfoEntry 1 }
+
+hwETrackInfoVlanIndex OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The VLAN ID, which is the configuration index in a VLAN.
+ If a VSI is specified, the value is 4095. If both hwETrackInfoVlanIndex and hwETrackInfoVsiName are invalid, the configuration is global.
+ The value ranges from 1 to 4095.
+ "
+ ::= { hwL2mcETrackingInfoEntry 2 }
+
+hwETrackInfoVsiName OBJECT-TYPE
+ SYNTAX DisplayString(SIZE (0..31))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The name of a VSI.
+ If a VLAN is specified, the value is 32. If both hwETrackInfoVlanIndex and hwETrackInfoVsiName are invalid, the configuration is global."
+ ::= { hwL2mcETrackingInfoEntry 3 }
+
+hwETrackInfoGroupAddr OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The group address of a multicast group. In the case of MAC forwarding, the group address is the smallest of 32 IP addresses."
+ ::= { hwL2mcETrackingInfoEntry 4 }
+
+hwETrackInfoSourceAddr OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The source IP address of a multicast group."
+ ::= { hwL2mcETrackingInfoEntry 5 }
+
+hwETrackInfoPortType OBJECT-TYPE
+ SYNTAX HWPortType
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The interface type:
+ 1: Invalid
+ 2: PW interface
+ 3: L2 interface
+ 4: Encapsulation sub-interface
+ 5: Termination sub-interface
+ 6: Interface Board
+ 7: Vlanif Port
+ 11: Main-interface-bound-to-vsi
+ "
+ ::= { hwL2mcETrackingInfoEntry 6 }
+
+hwETrackInfoPortIfIndex OBJECT-TYPE
+ SYNTAX InterfaceIndexOrZero
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The interface index. The value 0 indicates that the interface index is invalid."
+ ::= { hwL2mcETrackingInfoEntry 7 }
+
+hwETrackInfoPortPeId OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The PE VID of an interface.
+ The value ranges from 1 to 4095.
+ The value 4095 indicates that the PE VID is invalid.
+ "
+ ::= { hwL2mcETrackingInfoEntry 8 }
+
+hwETrackInfoPortCeId OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The CE VID of an interface.
+ The value ranges from 1 to 4095.
+ The value 4095 indicates that the CE VID is invalid.
+ "
+ ::= { hwL2mcETrackingInfoEntry 9 }
+
+hwETrackInfoPeerAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The peer IP address of a PW interface. The value 0.0.0.0 indicates that the IP address is invalid."
+ ::= { hwL2mcETrackingInfoEntry 10 }
+
+hwETrackInfoVcOrSiteId OBJECT-TYPE
+ SYNTAX Unsigned32(1..4294967295)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The VC ID or SITE ID of a PW interface."
+ ::= { hwL2mcETrackingInfoEntry 11 }
+
+hwETrackInfoBoardNum OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The interface board number."
+ ::= { hwL2mcETrackingInfoEntry 12 }
+
+hwETrackInfoReportAddr OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The source IP address of a user."
+ ::= { hwL2mcETrackingInfoEntry 13 }
+
+hwETrackInfoFlag OBJECT-TYPE
+ SYNTAX Integer32(1..4)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The port filter mode:
+ 1 include
+ 2 exclude
+ "
+ ::= { hwL2mcETrackingInfoEntry 20 }
+
+--
+-- The hwL2mcSourceGroupTable group.
+--
+hwL2mcSourceGroupInfo
+ OBJECT IDENTIFIER ::= { hwIgspMibObject 22 }
+
+hwL2mcSourceGroupTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF HWL2mcSourceGroupEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table contains VLAN or VSI performance statistics information
+ for IGMP Snooping."
+ ::= { hwL2mcSourceGroupInfo 1 }
+
+hwL2mcSourceGroupEntry OBJECT-TYPE
+ SYNTAX HWL2mcSourceGroupEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry is created for each active VLAN or VSI in the device
+ and deleted when the VLAN or VSI becomes inactive."
+ INDEX { hwL2mcSourceGroupVlanIndex, hwL2mcSourceGroupVsiName,
+ hwL2mcSourceGroupGroupAddress, hwL2mcSourceGroupSourceAddress}
+ ::= { hwL2mcSourceGroupTable 1 }
+
+HWL2mcSourceGroupEntry ::= SEQUENCE {
+ hwL2mcSourceGroupVlanIndex VlanIdOrAny,
+ hwL2mcSourceGroupVsiName DisplayString,
+ hwL2mcSourceGroupGroupAddress IpAddress,
+ hwL2mcSourceGroupSourceAddress IpAddress,
+ hwL2mcSourceGroupStat Counter64
+ }
+
+hwL2mcSourceGroupVlanIndex OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095.
+ The value ranges from 1 to 4095.
+ "
+ ::= { hwL2mcSourceGroupEntry 1 }
+
+hwL2mcSourceGroupVsiName OBJECT-TYPE
+ SYNTAX DisplayString(SIZE (0..31))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The name of a VSI. If a VLAN is specified, the value is 32."
+ ::= { hwL2mcSourceGroupEntry 2 }
+
+hwL2mcSourceGroupGroupAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The group address of a multicast group.
+ In the case of MAC forwarding, the group address is the smallest of 32 IP addresses."
+ ::= { hwL2mcSourceGroupEntry 3 }
+
+hwL2mcSourceGroupSourceAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The source IP address of a multicast group."
+ ::= { hwL2mcSourceGroupEntry 4 }
+
+hwL2mcSourceGroupStat OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "the packet statistic of (S,G) group."
+ ::= { hwL2mcSourceGroupEntry 10 }
+
+--
+-- The hwL2mcDTFwdInfo group.
+--
+hwL2mcDTFwdInfo
+ OBJECT IDENTIFIER ::= { hwIgspMibObject 23 }
+
+hwL2mcDTFwdTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF HWL2mcDTFwdEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table contains l2 multicast forward information
+ for IGMP Snooping."
+ ::= { hwL2mcDTFwdInfo 1 }
+
+hwL2mcDTFwdEntry OBJECT-TYPE
+ SYNTAX HWL2mcDTFwdEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry is created for each active VLAN or VSI in the device create a forwarding table entry and delete when
+ a forwarding table entry deleted."
+ INDEX { hwL2mcDTFwdSlotIndex, hwL2mcDTFwdVlanIndex, hwL2mcDTFwdVsiName, hwL2mcDTFwdGroupAddress, hwL2mcDTFwdSourceAddress, hwL2mcDTFwdPortType,
+ hwL2mcDTFwdPortIfIndex, hwL2mcDTFwdPortPeId, hwL2mcDTFwdPortCeId,
+ hwL2mcDTFwdPeerAddress, hwL2mcDTFwdVcOrSiteId, hwL2mcDTFwdBoardNum }
+ ::= { hwL2mcDTFwdTable 1 }
+
+HWL2mcDTFwdEntry ::= SEQUENCE {
+ hwL2mcDTFwdSlotIndex Integer32,
+ hwL2mcDTFwdVlanIndex VlanIdOrAny,
+ hwL2mcDTFwdVsiName DisplayString,
+ hwL2mcDTFwdGroupAddress IpAddress,
+ hwL2mcDTFwdSourceAddress IpAddress,
+ hwL2mcDTFwdPortType HWPortType,
+ hwL2mcDTFwdPortIfIndex InterfaceIndexOrZero,
+ hwL2mcDTFwdPortPeId VlanIdOrAny,
+ hwL2mcDTFwdPortCeId VlanIdOrAny,
+ hwL2mcDTFwdPeerAddress IpAddress,
+ hwL2mcDTFwdVcOrSiteId Unsigned32,
+ hwL2mcDTFwdBoardNum Integer32,
+ hwL2mcDTFwdAddressType INTEGER,
+ hwL2mcDTFwdHostFlag1 INTEGER,
+ hwL2mcDTFwdHostFlag2 INTEGER,
+ hwL2mcDTFwdHostFlag3 INTEGER,
+ hwL2mcDTFwdHostFlag4 INTEGER
+ }
+
+hwL2mcDTFwdSlotIndex OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The slot index, which is interface board number. "
+ ::= { hwL2mcDTFwdEntry 1 }
+
+hwL2mcDTFwdVlanIndex OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095.
+ The value ranges from 1 to 4095.
+ "
+ ::= { hwL2mcDTFwdEntry 2 }
+
+hwL2mcDTFwdVsiName OBJECT-TYPE
+ SYNTAX DisplayString(SIZE (0..31))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The name of a VSI. If a VLAN is specified, the value is 32."
+ ::= { hwL2mcDTFwdEntry 3 }
+
+hwL2mcDTFwdGroupAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The group address of a multicast group. In the case of MAC forwarding, the group address is the smallest of 32 IP addresses."
+ ::= { hwL2mcDTFwdEntry 4 }
+
+hwL2mcDTFwdSourceAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The source IP address of a multicast group."
+ ::= { hwL2mcDTFwdEntry 5 }
+
+hwL2mcDTFwdPortType OBJECT-TYPE
+ SYNTAX HWPortType
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The interface type:
+ 1: Invalid
+ 2: PW interface
+ 3: L2 interface
+ 4: Encapsulation sub-interface
+ 5: Termination sub-interface
+ 6: Interface Board
+ 7: Vlanif Port
+ 11: Main-interface-bound-to-vsi
+ "
+ ::= { hwL2mcDTFwdEntry 6 }
+
+hwL2mcDTFwdPortIfIndex OBJECT-TYPE
+ SYNTAX InterfaceIndexOrZero
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The interface index. The value 0 indicates that the interface index is invalid."
+ ::= { hwL2mcDTFwdEntry 7 }
+
+hwL2mcDTFwdPortPeId OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The PE VID of an interface.
+ The value ranges from 1 to 4095.
+ The value 4095 indicates that the PE VID is invalid.
+ "
+ ::= { hwL2mcDTFwdEntry 8 }
+
+hwL2mcDTFwdPortCeId OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The CE VID of an interface.
+ The value ranges from 1 to 4095.
+ The value 4095 indicates that the CE VID is invalid.
+ "
+ ::= { hwL2mcDTFwdEntry 9 }
+
+hwL2mcDTFwdPeerAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The peer IP address of a PW interface. The value 0.0.0.0 indicates that the IP address is invalid."
+ ::= { hwL2mcDTFwdEntry 10 }
+
+hwL2mcDTFwdVcOrSiteId OBJECT-TYPE
+ SYNTAX Unsigned32(1..4294967295)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The VC ID or SITE ID of a PW interface."
+ ::= { hwL2mcDTFwdEntry 11 }
+
+hwL2mcDTFwdBoardNum OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The interface board number."
+ ::= { hwL2mcDTFwdEntry 12 }
+
+hwL2mcDTFwdAddressType OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ ip(1),
+ mac(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The address type of an entry:
+ 1: IP
+ 2: MAC
+ The default value is 1.
+ "
+ ::= { hwL2mcDTFwdEntry 21 }
+
+hwL2mcDTFwdHostFlag1 OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ static(1),
+ dynamic(2),
+ staticDynamic(3),
+ invalid(4)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The mode to create an interface on the host:
+ 1: static
+ 2: dynamic
+ 3: static and dynamic
+ 4: invalid
+ "
+ ::= { hwL2mcDTFwdEntry 22 }
+
+hwL2mcDTFwdHostFlag2 OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ nonMapping(1),
+ mapping(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Whether an interface on the host is created through SSM-mapping:
+ 1: non-mapping
+ 2: mapping
+ "
+ ::= { hwL2mcDTFwdEntry 23 }
+
+hwL2mcDTFwdHostFlag3 OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ host(1),
+ router(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The type of an interface created on a router:
+ 1: Interface connected to the host
+ 2: Router interface that replicates multicast data flows
+ "
+ ::= { hwL2mcDTFwdEntry 24 }
+
+hwL2mcDTFwdHostFlag4 OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ port(1),
+ static(2),
+ both(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates (S, G) table created :
+ 1: from port;
+ 2: from static;
+ 3: from both
+ the default falue is 1
+ "
+ ::= { hwL2mcDTFwdEntry 25 }
+
+
+--
+-- The hwDTGroupInfo group.
+--
+hwL2mcDTGroupInfo
+ OBJECT IDENTIFIER ::= { hwIgspMibObject 24 }
+
+hwL2mcDTGroupInfoTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF HWL2mcDTGroupInfoEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table contains l2 multicast group information
+ for IGMP Snooping."
+ ::= { hwL2mcDTGroupInfo 1 }
+
+hwL2mcDTGroupInfoEntry OBJECT-TYPE
+ SYNTAX HWL2mcDTGroupInfoEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry is created for each active VLAN or VSI in the device create a forwarding table entry and delete when
+ a forwarding table entry deleted."
+ INDEX { hwL2mcDTGroupSlotIndex, hwL2mcDTGroupVlanIndex, hwL2mcDTGroupVsiName, hwL2mcDTGroupGroupAddress, hwL2mcDTGroupSourceAddress,
+ hwL2mcDTGroupFilterFlag, hwL2mcDTPortType, hwL2mcDTGroupPortIfIndex, hwL2mcDTGroupPortPeId,
+ hwL2mcDTGroupPortCeId, hwL2mcDTGroupPeerAddress, hwL2mcDTGroupVcOrSiteId, hwL2mcDTGroupBoardNum }
+ ::= { hwL2mcDTGroupInfoTable 1 }
+
+HWL2mcDTGroupInfoEntry ::= SEQUENCE {
+ hwL2mcDTGroupSlotIndex Integer32,
+ hwL2mcDTGroupVlanIndex VlanIdOrAny,
+ hwL2mcDTGroupVsiName DisplayString,
+ hwL2mcDTGroupGroupAddress IpAddress,
+ hwL2mcDTGroupSourceAddress IpAddress,
+ hwL2mcDTGroupFilterFlag INTEGER,
+ hwL2mcDTPortType HWPortType,
+ hwL2mcDTGroupPortIfIndex InterfaceIndexOrZero,
+ hwL2mcDTGroupPortPeId VlanIdOrAny,
+ hwL2mcDTGroupPortCeId VlanIdOrAny,
+ hwL2mcDTGroupPeerAddress IpAddress,
+ hwL2mcDTGroupVcOrSiteId Unsigned32,
+ hwL2mcDTGroupBoardNum Integer32,
+ hwL2mcDTSourceUpTime Counter32,
+ hwL2mcDTSourceExpires Counter32,
+ hwL2mcDTGroupUpTime Counter32,
+ hwL2mcDTGroupExpires Counter32,
+ hwL2mcDTGroupHostFlag1 INTEGER,
+ hwL2mcDTGroupHostFlag2 INTEGER,
+ hwL2mcDTGroupRowStatus RowStatus
+ }
+
+hwL2mcDTGroupSlotIndex OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The slot index, which is interface board number. "
+ ::= { hwL2mcDTGroupInfoEntry 1 }
+
+hwL2mcDTGroupVlanIndex OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095.
+ The value ranges from 1 to 4095.
+ "
+ ::= { hwL2mcDTGroupInfoEntry 2 }
+
+hwL2mcDTGroupVsiName OBJECT-TYPE
+ SYNTAX DisplayString(SIZE (0..31))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The name of a VSI. If a VLAN is specified, the value is 32."
+ ::= { hwL2mcDTGroupInfoEntry 3 }
+
+hwL2mcDTGroupGroupAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The IP address of a multicast group."
+ ::= { hwL2mcDTGroupInfoEntry 4 }
+
+hwL2mcDTGroupSourceAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The source IP address of a multicast group."
+ ::= { hwL2mcDTGroupInfoEntry 5 }
+
+hwL2mcDTGroupFilterFlag OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ include(1),
+ exclude(2),
+ invalid(3)
+ }
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The filtering mode:
+ 1: include
+ 2: exclude
+ 3: invalid
+ "
+ ::= { hwL2mcDTGroupInfoEntry 6 }
+
+hwL2mcDTPortType OBJECT-TYPE
+ SYNTAX HWPortType
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The interface type:
+ 1: Invalid
+ 2: PW interface
+ 3: L2 interface
+ 4: Encapsulation sub-interface
+ 5: Termination sub-interface
+ 6: Interface Board
+ 7: Vlanif Port
+ 11: Main-interface-bound-to-vsi
+ "
+ ::= { hwL2mcDTGroupInfoEntry 7 }
+
+hwL2mcDTGroupPortIfIndex OBJECT-TYPE
+ SYNTAX InterfaceIndexOrZero
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The interface index. The value 0 indicates that the interface index is invalid."
+ ::= { hwL2mcDTGroupInfoEntry 8 }
+
+hwL2mcDTGroupPortPeId OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The PE VID of an interface.
+ The value ranges from 1 to 4095.
+ The value 4095 indicates that the PE VID is invalid.
+ "
+ ::= { hwL2mcDTGroupInfoEntry 9 }
+
+hwL2mcDTGroupPortCeId OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The CE VID of an interface.
+ The value ranges from 1 to 4095.
+ The value 4095 indicates that the CE VID is invalid.
+ "
+ ::= { hwL2mcDTGroupInfoEntry 10 }
+
+hwL2mcDTGroupPeerAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The peer IP address of a PW interface. The value 0.0.0.0 indicates that the IP address is invalid."
+ ::= { hwL2mcDTGroupInfoEntry 11 }
+
+hwL2mcDTGroupVcOrSiteId OBJECT-TYPE
+ SYNTAX Unsigned32(1..4294967295)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The VC ID or SITE ID of a PW interface."
+ ::= { hwL2mcDTGroupInfoEntry 12 }
+
+hwL2mcDTGroupBoardNum OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The interface board number."
+ ::= { hwL2mcDTGroupInfoEntry 13 }
+
+hwL2mcDTSourceUpTime OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "How long the source group exists in the forwarding entry."
+ ::= { hwL2mcDTGroupInfoEntry 21 }
+
+hwL2mcDTSourceExpires OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The timeout period of the source group in the forwarding entry, that is, the aging time of the source group."
+ ::= { hwL2mcDTGroupInfoEntry 22 }
+
+hwL2mcDTGroupUpTime OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "How long the group exists in the forwarding entry."
+ ::= { hwL2mcDTGroupInfoEntry 23 }
+
+hwL2mcDTGroupExpires OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "When the group expires in the forwarding entry, that is, the aging time of the source group."
+ ::= { hwL2mcDTGroupInfoEntry 24 }
+
+
+
+hwL2mcDTGroupHostFlag1 OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ static(1),
+ dynamic(2),
+ staticDynamic(3),
+ invalid(4)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The mode to create an interface on the host:
+ 1: static
+ 2: dynamic
+ 3: static and dynamic
+ 4: invalid
+ "
+ ::= { hwL2mcDTGroupInfoEntry 26 }
+
+hwL2mcDTGroupHostFlag2 OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ nonMapping(1),
+ mapping(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Whether an interface on the host is created through SSM-mapping:
+ 1: non-mapping
+ 2: mapping
+ "
+ ::= { hwL2mcDTGroupInfoEntry 27 }
+
+hwL2mcDTGroupRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The row status."
+ ::= { hwL2mcDTGroupInfoEntry 100 }
+
+--
+-- The hwL2mcMulticastTrafficPolicyCfgInfo group.
+--
+hwL2mcMulticastTrafficPolicyCfgInfo
+ OBJECT IDENTIFIER ::= { hwIgspMibObject 25 }
+
+hwL2mcMulticastTrafficPolicyCfgTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF HWL2mcMulticastTrafficPolicyCfgEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "In this table, you can query or configure whether to disable receive multicast traffic on a port."
+ ::= { hwL2mcMulticastTrafficPolicyCfgInfo 1 }
+
+hwL2mcMulticastTrafficPolicyCfgEntry OBJECT-TYPE
+ SYNTAX HWL2mcMulticastTrafficPolicyCfgEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry is created for each active VLAN or VSI in the device when disable receive multicast traffic on a port."
+ INDEX { hwMulticastTrafficPolicyPortType, hwMulticastTrafficPolicyPortIfIndex, hwMulticastTrafficPolicyPortPeId, hwMulticastTrafficPolicyPortCeId,
+ hwMulticastTrafficPolicyPortEndCeId,
+ hwMulticastTrafficPolicyPeerAddress, hwMulticastTrafficPolicyVcOrSiteId,hwMulticastTrafficPolicyVlanIndex, hwMulticastTrafficPolicyVsiName,
+ hwMulticastTrafficPolicyEndVlanIndex
+ }
+ ::= { hwL2mcMulticastTrafficPolicyCfgTable 1 }
+
+HWL2mcMulticastTrafficPolicyCfgEntry ::= SEQUENCE {
+ hwMulticastTrafficPolicyPortType HWPortType,
+ hwMulticastTrafficPolicyPortIfIndex InterfaceIndexOrZero,
+ hwMulticastTrafficPolicyPortPeId VlanIdOrAny,
+ hwMulticastTrafficPolicyPortCeId VlanIdOrAny,
+ hwMulticastTrafficPolicyPortEndCeId VlanIdOrAny,
+ hwMulticastTrafficPolicyPeerAddress IpAddress,
+ hwMulticastTrafficPolicyVcOrSiteId Unsigned32,
+ hwMulticastTrafficPolicyVlanIndex VlanIdOrAny,
+ hwMulticastTrafficPolicyEndVlanIndex VlanIdOrAny,
+ hwMulticastTrafficPolicyVsiName DisplayString,
+ hwMulticastTrafficPolicyRowStatus RowStatus
+ }
+
+
+hwMulticastTrafficPolicyPortType OBJECT-TYPE
+ SYNTAX HWPortType
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The interface type:
+ 1: Invalid
+ 2: PW interface
+ 3: L2 interface
+ 4: Encapsulation sub-interface
+ 5: Termination sub-interface
+ 6: Interface Board
+ 7: Vlanif Port
+ 11: Main-interface-bound-to-vsi
+ "
+ ::= { hwL2mcMulticastTrafficPolicyCfgEntry 1 }
+
+hwMulticastTrafficPolicyPortIfIndex OBJECT-TYPE
+ SYNTAX InterfaceIndexOrZero
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The interface index. The value 0 indicates that the interface index is invalid."
+ ::= { hwL2mcMulticastTrafficPolicyCfgEntry 2 }
+
+hwMulticastTrafficPolicyPortPeId OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The PE VID of an interface.
+ The value ranges from 1 to 4095.
+ The value 4095 indicates that the PE VID is invalid.
+ "
+ ::= { hwL2mcMulticastTrafficPolicyCfgEntry 3 }
+
+hwMulticastTrafficPolicyPortCeId OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The CE VID of an interface.
+ The value ranges from 1 to 4095.
+ The value 4095 indicates that the CE VID is invalid.
+ "
+ ::= { hwL2mcMulticastTrafficPolicyCfgEntry 4 }
+
+hwMulticastTrafficPolicyPortEndCeId OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The CE VID of an interface.
+ The value ranges from 1 to 4095.
+ The value 4095 indicates that the CE VID is invalid.
+ "
+ ::= { hwL2mcMulticastTrafficPolicyCfgEntry 5 }
+
+hwMulticastTrafficPolicyPeerAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The peer IP address of a PW interface. The value 0.0.0.0 indicates that the IP address is invalid."
+ ::= { hwL2mcMulticastTrafficPolicyCfgEntry 6 }
+
+hwMulticastTrafficPolicyVcOrSiteId OBJECT-TYPE
+ SYNTAX Unsigned32(1..4294967295)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The VC ID or SITE ID of a PW interface."
+ ::= { hwL2mcMulticastTrafficPolicyCfgEntry 7 }
+
+hwMulticastTrafficPolicyVlanIndex OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095.
+ The value ranges from 1 to 4095.
+ "
+ ::= { hwL2mcMulticastTrafficPolicyCfgEntry 8 }
+
+hwMulticastTrafficPolicyEndVlanIndex OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095.
+ The value ranges from 1 to 4095.
+ "
+ ::= { hwL2mcMulticastTrafficPolicyCfgEntry 9 }
+
+hwMulticastTrafficPolicyVsiName OBJECT-TYPE
+ SYNTAX DisplayString(SIZE (0..31))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The name of a VSI. If a VLAN is specified, the value is 32."
+ ::= { hwL2mcMulticastTrafficPolicyCfgEntry 10 }
+
+hwMulticastTrafficPolicyRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The row status."
+ ::= { hwL2mcMulticastTrafficPolicyCfgEntry 100 }
+
+
+--
+-- The hwL2mcRouteLearnDisablePolicyCfgInfo group.
+--
+hwL2mcRouteLearnDisablePolicyCfgInfo
+ OBJECT IDENTIFIER ::= { hwIgspMibObject 26 }
+
+hwL2mcRouteLearnDisablePolicyCfgTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF HWL2mcRouteLearnDisablePolicyCfgEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "In this table, you can query or configure whether to disable router port learning on a port."
+ ::= { hwL2mcRouteLearnDisablePolicyCfgInfo 1 }
+
+hwL2mcRouteLearnDisablePolicyCfgEntry OBJECT-TYPE
+ SYNTAX HWL2mcRouteLearnDisablePolicyCfgEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry is created for each active VLAN or VSI in the device when disable router port learning on a port."
+ INDEX { hwRouteLearnDisablePolicyPortType, hwRouteLearnDisablePolicyPortIfIndex, hwRouteLearnDisablePolicyPortPeId, hwRouteLearnDisablePolicyPortCeId,
+ hwRouteLearnDisablePolicyPortEndCeId, hwRouteLearnDisablePolicyPeerAddress, hwRouteLearnDisablePolicyVcOrSiteId,hwRouteLearnDisablePolicyVlanIndex,
+ hwRouteLearnDisablePolicyEndVlanIndex, hwRouteLearnDisablePolicyVsiName
+ }
+ ::= { hwL2mcRouteLearnDisablePolicyCfgTable 1 }
+
+HWL2mcRouteLearnDisablePolicyCfgEntry ::= SEQUENCE {
+ hwRouteLearnDisablePolicyPortType HWPortType,
+ hwRouteLearnDisablePolicyPortIfIndex InterfaceIndexOrZero,
+ hwRouteLearnDisablePolicyPortPeId VlanIdOrAny,
+ hwRouteLearnDisablePolicyPortCeId VlanIdOrAny,
+ hwRouteLearnDisablePolicyPortEndCeId VlanIdOrAny,
+ hwRouteLearnDisablePolicyPeerAddress IpAddress,
+ hwRouteLearnDisablePolicyVcOrSiteId Unsigned32,
+ hwRouteLearnDisablePolicyVlanIndex VlanIdOrAny,
+ hwRouteLearnDisablePolicyEndVlanIndex VlanIdOrAny,
+ hwRouteLearnDisablePolicyVsiName DisplayString,
+ hwRouteLearnDisablePolicyRowStatus RowStatus
+ }
+
+
+hwRouteLearnDisablePolicyPortType OBJECT-TYPE
+ SYNTAX HWPortType
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The interface type:
+ 1: Invalid
+ 2: PW interface
+ 3: L2 interface
+ 4: Encapsulation sub-interface
+ 5: Termination sub-interface
+ 6: Interface Board
+ 7: Vlanif Port
+ 11: Main-interface-bound-to-vsi
+ "
+ ::= { hwL2mcRouteLearnDisablePolicyCfgEntry 1 }
+
+hwRouteLearnDisablePolicyPortIfIndex OBJECT-TYPE
+ SYNTAX InterfaceIndexOrZero
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The interface index. The value 0 indicates that the interface index is invalid."
+ ::= { hwL2mcRouteLearnDisablePolicyCfgEntry 2 }
+
+hwRouteLearnDisablePolicyPortPeId OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The PE VID of an interface.
+ The value ranges from 1 to 4095.
+ The value 4095 indicates that the PE VID is invalid.
+ "
+ ::= { hwL2mcRouteLearnDisablePolicyCfgEntry 3 }
+
+hwRouteLearnDisablePolicyPortCeId OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The CE VID of an interface.
+ The value ranges from 1 to 4095.
+ The value 4095 indicates that the CE VID is invalid.
+ "
+ ::= { hwL2mcRouteLearnDisablePolicyCfgEntry 4 }
+
+hwRouteLearnDisablePolicyPortEndCeId OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The CE VID of an interface.
+ The value ranges from 1 to 4095.
+ The value 4095 indicates that the CE VID is invalid.
+ "
+ ::= { hwL2mcRouteLearnDisablePolicyCfgEntry 5 }
+
+hwRouteLearnDisablePolicyPeerAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The peer IP address of a PW interface. The value 0.0.0.0 indicates that the IP address is invalid."
+ ::= { hwL2mcRouteLearnDisablePolicyCfgEntry 6 }
+
+hwRouteLearnDisablePolicyVcOrSiteId OBJECT-TYPE
+ SYNTAX Unsigned32(1..4294967295)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The VC ID or SITE ID of a PW interface."
+ ::= { hwL2mcRouteLearnDisablePolicyCfgEntry 7 }
+
+hwRouteLearnDisablePolicyVlanIndex OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095.
+ The value ranges from 1 to 4095.
+ "
+ ::= { hwL2mcRouteLearnDisablePolicyCfgEntry 8 }
+
+hwRouteLearnDisablePolicyEndVlanIndex OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095.
+ The value ranges from 1 to 4095.
+ "
+ ::= { hwL2mcRouteLearnDisablePolicyCfgEntry 9 }
+
+hwRouteLearnDisablePolicyVsiName OBJECT-TYPE
+ SYNTAX DisplayString(SIZE (0..31))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The name of a VSI. If a VLAN is specified, the value is 32."
+ ::= { hwL2mcRouteLearnDisablePolicyCfgEntry 10 }
+
+hwRouteLearnDisablePolicyRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The row status."
+ ::= { hwL2mcRouteLearnDisablePolicyCfgEntry 100 }
+
+
+
+--
+-- The hwL2mcTrackVRRPCfgInfo group.
+--
+hwL2mcTrackVRRPCfgInfo
+ OBJECT IDENTIFIER ::= { hwIgspMibObject 27 }
+
+hwL2mcTrackVRRPCfgTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF HWL2mcTrackVRRPCfgEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "In this table, you can query or configure a port to track VRRP."
+ ::= { hwL2mcTrackVRRPCfgInfo 1 }
+
+hwL2mcTrackVRRPCfgEntry OBJECT-TYPE
+ SYNTAX HWL2mcTrackVRRPCfgEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry is created for each active VLAN or VSI in the device when configure a port to track VRRP."
+ INDEX { hwTrackVRRPPortType, hwTrackVRRPPortIfIndex, hwTrackVRRPPortPeId, hwTrackVRRPPortCeId,
+ hwTrackVRRPPortEndCeId, hwTrackVRRPVlanIndex, hwTrackVRRPEndVlanIndex, hwTrackVRRPVsiName
+ }
+ ::= { hwL2mcTrackVRRPCfgTable 1 }
+
+HWL2mcTrackVRRPCfgEntry ::= SEQUENCE {
+ hwTrackVRRPPortType HWPortType,
+ hwTrackVRRPPortIfIndex InterfaceIndexOrZero,
+ hwTrackVRRPPortPeId VlanIdOrAny,
+ hwTrackVRRPPortCeId VlanIdOrAny,
+ hwTrackVRRPPortEndCeId VlanIdOrAny,
+ hwTrackVRRPVlanIndex VlanIdOrAny,
+ hwTrackVRRPEndVlanIndex VlanIdOrAny,
+ hwTrackVRRPVsiName DisplayString,
+ hwTrackVRRPVridIfIndex InterfaceIndexOrZero,
+ hwTrackVRRPVridID Unsigned32,
+ hwTrackVRRPRowStatus RowStatus
+ }
+
+
+hwTrackVRRPPortType OBJECT-TYPE
+ SYNTAX HWPortType
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The interface type:
+ 1: Invalid
+ 2: PW interface
+ 3: L2 interface
+ 4: Encapsulation sub-interface
+ 5: Termination sub-interface
+ 6: Interface Board
+ 7: Vlanif Port
+ 11: Main-interface-bound-to-vsi
+ "
+ ::= { hwL2mcTrackVRRPCfgEntry 1 }
+
+hwTrackVRRPPortIfIndex OBJECT-TYPE
+ SYNTAX InterfaceIndexOrZero
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The interface index. The value 0 indicates that the interface index is invalid."
+ ::= { hwL2mcTrackVRRPCfgEntry 2 }
+
+hwTrackVRRPPortPeId OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The PE VID of an interface.
+ The value ranges from 1 to 4095.
+ The value 4095 indicates that the PE VID is invalid.
+ "
+ ::= { hwL2mcTrackVRRPCfgEntry 3 }
+
+hwTrackVRRPPortCeId OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The CE VID of an interface.
+ The value ranges from 1 to 4095.
+ The value 4095 indicates that the CE VID is invalid.
+ "
+ ::= { hwL2mcTrackVRRPCfgEntry 4 }
+
+hwTrackVRRPPortEndCeId OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The CE VID of an interface.
+ The value ranges from 1 to 4095.
+ The value 4095 indicates that the CE VID is invalid.
+ "
+ ::= { hwL2mcTrackVRRPCfgEntry 5 }
+
+hwTrackVRRPVlanIndex OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095.
+ The value ranges from 1 to 4095.
+ "
+ ::= { hwL2mcTrackVRRPCfgEntry 6 }
+
+hwTrackVRRPEndVlanIndex OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095.
+ The value ranges from 1 to 4095.
+ "
+ ::= { hwL2mcTrackVRRPCfgEntry 7 }
+
+hwTrackVRRPVsiName OBJECT-TYPE
+ SYNTAX DisplayString(SIZE (0..31))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The name of a VSI. If a VLAN is specified, the value is 32."
+ ::= { hwL2mcTrackVRRPCfgEntry 8 }
+
+hwTrackVRRPVridIfIndex OBJECT-TYPE
+ SYNTAX InterfaceIndexOrZero
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The interface index. The value 0 indicates that the interface index is invalid."
+ ::= { hwL2mcTrackVRRPCfgEntry 9 }
+
+hwTrackVRRPVridID OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The VRRP VRID."
+ ::= { hwL2mcTrackVRRPCfgEntry 10 }
+
+hwTrackVRRPRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The row status."
+ ::= { hwL2mcTrackVRRPCfgEntry 100 }
+
+
+--
+-- The hwL2mcMInstCfgInfo group.
+--
+hwL2mcMInstCfgInfo
+ OBJECT IDENTIFIER ::= { hwIgspMibObject 28 }
+
+hwL2mcMInstCfgTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF HWL2mcMInstCfgEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table create or modified multicast Instance."
+ ::= { hwL2mcMInstCfgInfo 1 }
+
+hwL2mcMInstCfgEntry OBJECT-TYPE
+ SYNTAX HWL2mcMInstCfgEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry of multicast-instance is created in the device."
+ INDEX { hwL2mcMInstId
+ }
+ ::= { hwL2mcMInstCfgTable 1 }
+
+HWL2mcMInstCfgEntry ::= SEQUENCE {
+ hwL2mcMInstId Unsigned32,
+ hwL2mcMInstVlanIndex VlanIdOrAnyOrNone,
+ hwL2mcMInstVsiName DisplayString,
+ hwL2mcMInstProtectInst Unsigned32,
+ hwL2mcMInstRowStatus RowStatus
+ }
+
+hwL2mcMInstId OBJECT-TYPE
+ SYNTAX Unsigned32(1..32)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "L2 multicast instance ID"
+ ::= { hwL2mcMInstCfgEntry 1 }
+
+hwL2mcMInstVlanIndex OBJECT-TYPE
+ SYNTAX VlanIdOrAnyOrNone
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Multicast-VLAN ID"
+ ::= { hwL2mcMInstCfgEntry 2 }
+
+hwL2mcMInstVsiName OBJECT-TYPE
+ SYNTAX DisplayString(SIZE (0..31))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Multicast-VSI name"
+ ::= { hwL2mcMInstCfgEntry 3 }
+
+hwL2mcMInstProtectInst OBJECT-TYPE
+ SYNTAX Unsigned32(1..32)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "L2 multicast protect instance ID"
+ ::= { hwL2mcMInstCfgEntry 4 }
+
+hwL2mcMInstRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The row status."
+ ::= { hwL2mcMInstCfgEntry 100 }
+
+
+hwL2mcMInstGroupCfgTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF HWL2mcMInstGroupCfgEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Thist table configure multicast instance mulitcast group infomation."
+ ::= { hwL2mcMInstCfgInfo 2 }
+
+hwL2mcMInstGroupCfgEntry OBJECT-TYPE
+ SYNTAX HWL2mcMInstGroupCfgEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry of multicast-instance channel-group is created in the device."
+ INDEX { hwL2mcMInstGroupId, hwL2mcMInstGroupAddress, hwL2mcMinstGroupAddressMask
+ }
+ ::= { hwL2mcMInstGroupCfgTable 1 }
+
+HWL2mcMInstGroupCfgEntry ::= SEQUENCE {
+ hwL2mcMInstGroupId Unsigned32,
+ hwL2mcMInstGroupAddress IpAddress,
+ hwL2mcMinstGroupAddressMask IpAddress,
+ hwL2mcMInstGroupRowStatus RowStatus
+ }
+
+hwL2mcMInstGroupId OBJECT-TYPE
+ SYNTAX Unsigned32(1..32)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "L2 multicast instance ID"
+ ::= { hwL2mcMInstGroupCfgEntry 1 }
+
+hwL2mcMInstGroupAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Group address."
+ ::= { hwL2mcMInstGroupCfgEntry 2 }
+
+hwL2mcMinstGroupAddressMask OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Group address."
+ ::= { hwL2mcMInstGroupCfgEntry 3 }
+
+hwL2mcMInstGroupRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The row status."
+ ::= { hwL2mcMInstGroupCfgEntry 100 }
+
+
+hwL2mcMInstUserCfgTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF HWL2mcMInstUserCfgEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "User instance in the multicast instance."
+ ::= { hwL2mcMInstCfgInfo 3 }
+
+hwL2mcMInstUserCfgEntry OBJECT-TYPE
+ SYNTAX HWL2mcMInstUserCfgEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry of user-instance is created in the device."
+ INDEX { hwL2mcMInstUserMInstId, hwL2mcMInstUserVLANID, hwL2mcMInstUserEndVLANID, hwL2mcMInstUserVSIName
+ }
+ ::= { hwL2mcMInstUserCfgTable 1 }
+
+HWL2mcMInstUserCfgEntry ::= SEQUENCE {
+ hwL2mcMInstUserMInstId Unsigned32,
+ hwL2mcMInstUserVLANID VlanIdOrAnyOrNone,
+ hwL2mcMInstUserEndVLANID VlanIdOrAnyOrNone,
+ hwL2mcMInstUserVSIName DisplayString,
+ hwL2mcMInstUserRowStatus RowStatus
+ }
+
+hwL2mcMInstUserMInstId OBJECT-TYPE
+ SYNTAX Unsigned32(1..32)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "L2 multicast instance ID"
+ ::= { hwL2mcMInstUserCfgEntry 1 }
+
+hwL2mcMInstUserVLANID OBJECT-TYPE
+ SYNTAX VlanIdOrAnyOrNone
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "User VLAN ID."
+ ::= { hwL2mcMInstUserCfgEntry 2 }
+
+hwL2mcMInstUserEndVLANID OBJECT-TYPE
+ SYNTAX VlanIdOrAnyOrNone
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "User End VLAN ID."
+ ::= { hwL2mcMInstUserCfgEntry 3 }
+
+hwL2mcMInstUserVSIName OBJECT-TYPE
+ SYNTAX DisplayString(SIZE (0..31))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "VSI name."
+ ::= { hwL2mcMInstUserCfgEntry 4 }
+
+hwL2mcMInstUserRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The row status."
+ ::= { hwL2mcMInstUserCfgEntry 100 }
+
+--
+-- The hwL2mcStaticGroupCfgInfo group.
+--
+hwL2mcStaticGroupCfgInfo
+ OBJECT IDENTIFIER ::= { hwIgspMibObject 29 }
+
+hwL2mcStaticGroupCfgTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF HWL2mcStaticGroupCfgEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table contains l2 multicast static group information
+ for IGMP Snooping."
+ ::= { hwL2mcStaticGroupCfgInfo 1 }
+
+hwL2mcStaticGroupCfgEntry OBJECT-TYPE
+ SYNTAX HWL2mcStaticGroupCfgEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry is created for each active VLAN or VSI in the device create a static group entry and delete when
+ a static group entry deleted."
+ INDEX { hwStaticGroupCfgPortType, hwStaticGroupCfgPortIfIndex, hwStaticGroupCfgPortPeId, hwStaticGroupCfgPortPeIdEnd, hwStaticGroupCfgPortCeId,
+ hwStaticGroupCfgPortCeIdEnd, hwStaticGroupCfgPeerAddress, hwStaticGroupCfgVcOrSiteId, hwStaticGroupCfgVlanIndex, hwStaticGroupCfgVsiName,
+ hwStaticGroupCfgGroupAddress, hwStaticGroupCfgSourceAddress }
+ ::= { hwL2mcStaticGroupCfgTable 1 }
+
+HWL2mcStaticGroupCfgEntry ::= SEQUENCE {
+ hwStaticGroupCfgPortType HWPortType,
+ hwStaticGroupCfgPortIfIndex InterfaceIndexOrZero,
+ hwStaticGroupCfgPortPeId VlanIdOrAny,
+ hwStaticGroupCfgPortPeIdEnd VlanIdOrAny,
+ hwStaticGroupCfgPortCeId VlanIdOrAny,
+ hwStaticGroupCfgPortCeIdEnd VlanIdOrAny,
+ hwStaticGroupCfgPeerAddress IpAddress,
+ hwStaticGroupCfgVcOrSiteId Unsigned32,
+ hwStaticGroupCfgVlanIndex VlanIdOrAny,
+ hwStaticGroupCfgVsiName DisplayString,
+ hwStaticGroupCfgGroupAddress IpAddress,
+ hwStaticGroupCfgSourceAddress IpAddress,
+ hwStaticGroupCfgRowStatus RowStatus
+ }
+
+hwStaticGroupCfgPortType OBJECT-TYPE
+ SYNTAX HWPortType
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The interface type:
+ 1: Invalid
+ 2: PW interface
+ 3: L2 interface
+ 4: Encapsulation sub-interface
+ 5: Termination sub-interface
+ 6: Interface Board
+ 7: Vlanif Port
+ 11: Main-interface-bound-to-vsi
+ "
+ ::= { hwL2mcStaticGroupCfgEntry 1 }
+
+hwStaticGroupCfgPortIfIndex OBJECT-TYPE
+ SYNTAX InterfaceIndexOrZero
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The interface index. The value 0 indicates that the interface index is invalid."
+ ::= { hwL2mcStaticGroupCfgEntry 2 }
+
+hwStaticGroupCfgPortPeId OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The begin of a PE VID batch.
+ The value ranges from 1 to 4095.
+ The value 4095 indicates that the PE VID is invalid.
+ "
+ ::= { hwL2mcStaticGroupCfgEntry 3 }
+
+hwStaticGroupCfgPortPeIdEnd OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The end of a PE VID batch.
+ The value ranges from 1 to 4095.
+ The value 4095 indicates that the PE VID is invalid.
+ "
+ ::= { hwL2mcStaticGroupCfgEntry 4 }
+
+hwStaticGroupCfgPortCeId OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The begin of a CE VID batch.
+ The value ranges from 1 to 4095.
+ The value 0 indicates that the PE VID is invalid.
+ "
+ ::= { hwL2mcStaticGroupCfgEntry 5 }
+
+hwStaticGroupCfgPortCeIdEnd OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The end of a CE VID batch.
+ The value ranges from 1 to 4095.
+ The value 0 indicates that the PE VID is invalid.
+ "
+ ::= { hwL2mcStaticGroupCfgEntry 6 }
+
+hwStaticGroupCfgPeerAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The peer IP address of a PW interface. The value 0.0.0.0 indicates that the IP address is invalid."
+ ::= { hwL2mcStaticGroupCfgEntry 7 }
+
+hwStaticGroupCfgVcOrSiteId OBJECT-TYPE
+ SYNTAX Unsigned32(1..4294967295)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The VC ID or SITE ID of a PW interface."
+ ::= { hwL2mcStaticGroupCfgEntry 8 }
+
+hwStaticGroupCfgVlanIndex OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095.
+ The value ranges from 1 to 4095.
+ "
+ ::= { hwL2mcStaticGroupCfgEntry 9 }
+
+hwStaticGroupCfgVsiName OBJECT-TYPE
+ SYNTAX DisplayString(SIZE (0..31))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The name of a VSI. If a VLAN is specified, the value is 32."
+ ::= { hwL2mcStaticGroupCfgEntry 10 }
+
+hwStaticGroupCfgGroupAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The group address of a multicast group. In the case of MAC forwarding, the group address is the smallest of 32 IP addresses."
+ ::= { hwL2mcStaticGroupCfgEntry 11 }
+
+hwStaticGroupCfgSourceAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The source IP address of a multicast group."
+ ::= { hwL2mcStaticGroupCfgEntry 12 }
+
+hwStaticGroupCfgRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The row status."
+ ::= { hwL2mcStaticGroupCfgEntry 100 }
+
+--
+-- The hwL2mcPortGroupPolicyBatchCfgInfo group.
+--
+hwL2mcPortGroupPolicyBatchCfgInfo
+ OBJECT IDENTIFIER ::= { hwIgspMibObject 30 }
+
+hwL2mcPortGroupPolicyBatchCfgTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF HWL2mcPortGroupPolicyBatchCfgEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "In this table, you can query or configure a group policy to filter entries on a port."
+ ::= { hwL2mcPortGroupPolicyBatchCfgInfo 1 }
+
+hwL2mcPortGroupPolicyBatchCfgEntry OBJECT-TYPE
+ SYNTAX HWL2mcPortGroupPolicyBatchCfgEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry is created for each active VLAN or VSI in the device when a group policy added."
+ INDEX { hwPortGroupPolicyCfgPortType, hwPortGroupPolicyCfgPortIfIndex, hwPortGroupPolicyCfgPortPeId, hwPortGroupPolicyCfgPortPeIdEnd,
+ hwPortGroupPolicyCfgPortCeId, hwPortGroupPolicyCfgPortCeIdEnd, hwPortGroupPolicyCfgPeerAddress, hwPortGroupPolicyCfgVcOrSiteId,
+ hwPortGroupPolicyCfgVlanIndex, hwPortGroupPolicyCfgVsiName
+ }
+ ::= { hwL2mcPortGroupPolicyBatchCfgTable 1 }
+
+HWL2mcPortGroupPolicyBatchCfgEntry ::= SEQUENCE {
+ hwPortGroupPolicyCfgPortType HWPortType,
+ hwPortGroupPolicyCfgPortIfIndex InterfaceIndexOrZero,
+ hwPortGroupPolicyCfgPortPeId VlanIdOrAny,
+ hwPortGroupPolicyCfgPortPeIdEnd VlanIdOrAny,
+ hwPortGroupPolicyCfgPortCeId VlanIdOrAny,
+ hwPortGroupPolicyCfgPortCeIdEnd VlanIdOrAny,
+ hwPortGroupPolicyCfgPeerAddress IpAddress,
+ hwPortGroupPolicyCfgVcOrSiteId Unsigned32,
+ hwPortGroupPolicyCfgVlanIndex VlanIdOrAny,
+ hwPortGroupPolicyCfgVsiName DisplayString,
+ hwPortGroupPolicyCfgAclNum Integer32,
+ hwPortGroupPolicyCfgIgmpVersion INTEGER,
+ hwPortGroupPolicyCfgRowStatus RowStatus
+ }
+
+
+hwPortGroupPolicyCfgPortType OBJECT-TYPE
+ SYNTAX HWPortType
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The interface type:
+ 1: Invalid
+ 2: PW interface
+ 3: L2 interface
+ 4: Encapsulation sub-interface
+ 5: Termination sub-interface
+ 6: Interface Board
+ 7: Vlanif Port
+ 11: Main-interface-bound-to-vsi
+ "
+ ::= { hwL2mcPortGroupPolicyBatchCfgEntry 1 }
+
+hwPortGroupPolicyCfgPortIfIndex OBJECT-TYPE
+ SYNTAX InterfaceIndexOrZero
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The interface index. The value 0 indicates that the interface index is invalid."
+ ::= { hwL2mcPortGroupPolicyBatchCfgEntry 2 }
+
+hwPortGroupPolicyCfgPortPeId OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The begin of a PE VID batch.
+ The value ranges from 1 to 4095.
+ The value 4095 indicates that the PE VID is invalid.
+ "
+ ::= { hwL2mcPortGroupPolicyBatchCfgEntry 3 }
+
+hwPortGroupPolicyCfgPortPeIdEnd OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The end of a PE VID batch.
+ The value ranges from 1 to 4095.
+ The value 4095 indicates that the PE VID is invalid.
+ "
+ ::= { hwL2mcPortGroupPolicyBatchCfgEntry 4 }
+
+hwPortGroupPolicyCfgPortCeId OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The begin of a CE VID batch.
+ The value ranges from 1 to 4095.
+ The value 4095 indicates that the PE VID is invalid.
+ "
+ ::= { hwL2mcPortGroupPolicyBatchCfgEntry 5 }
+
+hwPortGroupPolicyCfgPortCeIdEnd OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The end of a CE VID batch.
+ The value ranges from 1 to 4095.
+ The value 4095 indicates that the PE VID is invalid.
+ "
+ ::= { hwL2mcPortGroupPolicyBatchCfgEntry 6 }
+
+hwPortGroupPolicyCfgPeerAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The peer IP address of a PW interface. The value 0.0.0.0 indicates that the IP address is invalid."
+ ::= { hwL2mcPortGroupPolicyBatchCfgEntry 7 }
+
+hwPortGroupPolicyCfgVcOrSiteId OBJECT-TYPE
+ SYNTAX Unsigned32(1..4294967295)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The VC ID or SITE ID of a PW interface."
+ ::= { hwL2mcPortGroupPolicyBatchCfgEntry 8 }
+
+hwPortGroupPolicyCfgVlanIndex OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095.
+ The value ranges from 1 to 4095.
+ "
+ ::= { hwL2mcPortGroupPolicyBatchCfgEntry 9 }
+
+hwPortGroupPolicyCfgVsiName OBJECT-TYPE
+ SYNTAX DisplayString(SIZE (0..31))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The name of a VSI. If a VLAN is specified, the value is 32."
+ ::= { hwL2mcPortGroupPolicyBatchCfgEntry 10 }
+
+hwPortGroupPolicyCfgAclNum OBJECT-TYPE
+ SYNTAX Integer32(0|2000..3999)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The number of a basic ACL.
+ The ACL number ranges from 2000 to 3999.
+ The default value is 0, indicating that the value is invalid.
+ "
+ ::= { hwL2mcPortGroupPolicyBatchCfgEntry 11 }
+
+hwPortGroupPolicyCfgIgmpVersion OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ versionAll(0),
+ version1(1),
+ version2(2),
+ version3(3)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The IGMP version.
+ The value ranges from 0 to 3.
+ The default is 0, indicating that no version is specified.
+ "
+ ::= { hwL2mcPortGroupPolicyBatchCfgEntry 12 }
+
+hwPortGroupPolicyCfgRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The row status."
+ ::= { hwL2mcPortGroupPolicyBatchCfgEntry 100 }
+
+
+--
+-- The hwL2mcCACPortLimitInfo group.
+--
+hwL2mcCACPortLimitInfo
+ OBJECT IDENTIFIER ::= { hwIgspMibObject 31 }
+
+hwL2mcCACPortLimitTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF HWL2mcCACPortLimitEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table describes the configurations of IGMP snooping CAC on an interface."
+ ::= { hwL2mcCACPortLimitInfo 1 }
+
+hwL2mcCACPortLimitEntry OBJECT-TYPE
+ SYNTAX HWL2mcCACPortLimitEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry is created for each IGMP snooping CAC on an interface."
+ INDEX { hwCACPortLimitVlanIndex, hwCACPortLimitVsiName, hwCACPortLimitPortType,
+ hwCACPortLimitIfIndex, hwCACPortLimitPeId, hwCACPortLimitPeIdEnd, hwCACPortLimitCeId, hwCACPortLimitCeIdEnd,
+ hwCACPortLimitPeerAddress, hwCACPortLimitVcOrSiteId, hwCACPortLimitChnlName }
+ ::= { hwL2mcCACPortLimitTable 1 }
+
+HWL2mcCACPortLimitEntry ::= SEQUENCE {
+ hwCACPortLimitVlanIndex VlanIdOrAny,
+ hwCACPortLimitVsiName DisplayString,
+ hwCACPortLimitPortType HWPortType,
+ hwCACPortLimitIfIndex InterfaceIndexOrZero,
+ hwCACPortLimitPeId VlanIdOrAny,
+ hwCACPortLimitPeIdEnd VlanIdOrAny,
+ hwCACPortLimitCeId VlanIdOrAny,
+ hwCACPortLimitCeIdEnd VlanIdOrAny,
+ hwCACPortLimitPeerAddress IpAddress,
+ hwCACPortLimitVcOrSiteId Unsigned32,
+ hwCACPortLimitChnlName DisplayString,
+ hwCACPortLimitAcl Integer32,
+ hwCACPortLimitMaxEntry Integer32,
+ hwCACPortLimitEntryCnt Counter32,
+ hwCACPortLimitMaxBandWidth Integer32,
+ hwCACPortLimitBandWidth Counter32,
+ hwCACPortLimitCfgRowStatus RowStatus
+ }
+
+
+hwCACPortLimitVlanIndex OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095.
+ The value ranges from 1 to 4095.
+ "
+ ::= { hwL2mcCACPortLimitEntry 1 }
+
+hwCACPortLimitVsiName OBJECT-TYPE
+ SYNTAX DisplayString(SIZE (0..31))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The name of a VSI. If a VLAN is specified, the value is 32."
+ ::= { hwL2mcCACPortLimitEntry 2 }
+
+hwCACPortLimitPortType OBJECT-TYPE
+ SYNTAX HWPortType
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The interface type:
+ 1: Invalid
+ 2: PW interface
+ 3: L2 interface
+ 4: Encapsulation sub-interface
+ 5: Termination sub-interface
+ 6: Interface Board
+ 7: Vlanif Port
+ 11: Main-interface-bound-to-vsi
+ "
+ ::= { hwL2mcCACPortLimitEntry 3 }
+
+hwCACPortLimitIfIndex OBJECT-TYPE
+ SYNTAX InterfaceIndexOrZero
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The interface index. The value 0 indicates that the interface index is invalid."
+ ::= { hwL2mcCACPortLimitEntry 4 }
+
+hwCACPortLimitPeId OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The begin of a PE VID batch.
+ The value ranges from 1 to 4095.
+ The value 4095 indicates that the PE VID is invalid.
+ "
+ ::= { hwL2mcCACPortLimitEntry 5 }
+hwCACPortLimitPeIdEnd OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The end of a PE VID batch.
+ The value ranges from 1 to 4095.
+ The value 4095 indicates that the PE VID is invalid.
+ "
+ ::= { hwL2mcCACPortLimitEntry 6 }
+
+hwCACPortLimitCeId OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The begin of a CE VID batch.
+ The value ranges from 1 to 4095.
+ The value 4095 indicates that the PE VID is invalid.
+ "
+ ::= { hwL2mcCACPortLimitEntry 7 }
+
+hwCACPortLimitCeIdEnd OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The end of a CE VID batch.
+ The value ranges from 1 to 4095.
+ The value 4095 indicates that the PE VID is invalid.
+ "
+ ::= { hwL2mcCACPortLimitEntry 8 }
+
+hwCACPortLimitPeerAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The peer IP address of a PW interface. The value 0.0.0.0 indicates that the IP address is invalid."
+ ::= { hwL2mcCACPortLimitEntry 9 }
+
+hwCACPortLimitVcOrSiteId OBJECT-TYPE
+ SYNTAX Unsigned32(1..4294967295)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The VC ID or SITE ID of a PW interface."
+ ::= { hwL2mcCACPortLimitEntry 10 }
+
+hwCACPortLimitChnlName OBJECT-TYPE
+ SYNTAX DisplayString(SIZE (0..31))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The channel name."
+ ::= { hwL2mcCACPortLimitEntry 11 }
+
+hwCACPortLimitAcl OBJECT-TYPE
+ SYNTAX Integer32(0|2000..3999)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The number of ACL for the multicast groups that do not need to be configured with CAC limit.
+ The ACL number ranges from 2000 to 3999.
+ The default value is 0, indicating that the number is invalid.
+ "
+ ::= { hwL2mcCACPortLimitEntry 12 }
+
+hwCACPortLimitMaxEntry OBJECT-TYPE
+ SYNTAX Integer32(0..8000)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The maximum number of forwarding entries. The value 0 indicates that the number is invalid."
+ ::= { hwL2mcCACPortLimitEntry 13 }
+
+hwCACPortLimitEntryCnt OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of current forwarding entries."
+ ::= { hwL2mcCACPortLimitEntry 14 }
+
+hwCACPortLimitMaxBandWidth OBJECT-TYPE
+ SYNTAX Integer32(0..4194304)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The maximum bandwidth. The value 0 indicates that the bandwidth is invalid."
+ ::= { hwL2mcCACPortLimitEntry 15 }
+
+hwCACPortLimitBandWidth OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The current bandwidth."
+ ::= { hwL2mcCACPortLimitEntry 16 }
+
+hwCACPortLimitCfgRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The row status."
+ ::= { hwL2mcCACPortLimitEntry 100 }
+
+--
+-- The hwL2mcQinqGroupSourceLimitInfo group.
+--
+hwL2mcQinqGroupSourceLimitInfo
+ OBJECT IDENTIFIER ::= { hwIgspMibObject 32 }
+
+hwL2mcQinqGroupLimitTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF HWL2mcQinqGroupLimitEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table describes the configurations of IGMP snooping group limit on a QinQ interface."
+ ::= { hwL2mcQinqGroupSourceLimitInfo 1 }
+
+hwL2mcQinqGroupLimitEntry OBJECT-TYPE
+ SYNTAX HWL2mcQinqGroupLimitEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry is created for each IGMP snooping group limit on a QinQ interface."
+ INDEX { hwL2mcQinqGroupLimitPortType, hwL2mcQinqGroupLimitIfIndex, hwL2mcQinqGroupLimitPeVid,
+ hwL2mcQinqGroupLimitPeVidEnd, hwL2mcQinqGroupLimitCeVid, hwL2mcQinqGroupLimitCeVidEnd }
+ ::= { hwL2mcQinqGroupLimitTable 1 }
+
+HWL2mcQinqGroupLimitEntry ::= SEQUENCE {
+ hwL2mcQinqGroupLimitPortType HWPortType,
+ hwL2mcQinqGroupLimitIfIndex InterfaceIndexOrZero,
+ hwL2mcQinqGroupLimitPeVid VlanIdOrAny,
+ hwL2mcQinqGroupLimitPeVidEnd VlanIdOrAny,
+ hwL2mcQinqGroupLimitCeVid VlanIdOrAny,
+ hwL2mcQinqGroupLimitCeVidEnd VlanIdOrAny,
+ hwL2mcQinqGroupLimitNum Unsigned32,
+ hwL2mcQinqGroupLimitRowStatus RowStatus
+ }
+
+
+hwL2mcQinqGroupLimitPortType OBJECT-TYPE
+ SYNTAX HWPortType
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The interface type:
+ 1: Invalid
+ 5: Termination sub-interface
+ "
+ ::= { hwL2mcQinqGroupLimitEntry 1 }
+
+hwL2mcQinqGroupLimitIfIndex OBJECT-TYPE
+ SYNTAX InterfaceIndexOrZero
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The interface index. The value 0 indicates that the interface index is invalid."
+ ::= { hwL2mcQinqGroupLimitEntry 2 }
+
+hwL2mcQinqGroupLimitPeVid OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The begin of a PE VID batch.
+ The value ranges from 1 to 4095.
+ The value 4095 indicates that the PE VID is invalid.
+ "
+ ::= { hwL2mcQinqGroupLimitEntry 3 }
+
+hwL2mcQinqGroupLimitPeVidEnd OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The end of a PE VID batch.
+ The value ranges from 1 to 4095.
+ The value 4095 indicates that the PE VID is invalid.
+ "
+ ::= { hwL2mcQinqGroupLimitEntry 4 }
+
+hwL2mcQinqGroupLimitCeVid OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The begin of a CE VID batch.
+ The value ranges from 1 to 4095.
+ The value 4095 indicates that the CE VID is invalid.
+ "
+ ::= { hwL2mcQinqGroupLimitEntry 5 }
+
+hwL2mcQinqGroupLimitCeVidEnd OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The end of a CE VID batch.
+ The value ranges from 1 to 4095.
+ The value 4095 indicates that the CE VID is invalid.
+ "
+ ::= { hwL2mcQinqGroupLimitEntry 6 }
+
+hwL2mcQinqGroupLimitNum OBJECT-TYPE
+ SYNTAX Unsigned32(1..16000)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The group limit number of a QinQ interface."
+ ::= { hwL2mcQinqGroupLimitEntry 10 }
+
+hwL2mcQinqGroupLimitRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The row status."
+ ::= { hwL2mcQinqGroupLimitEntry 100 }
+
+hwL2mcQinqSourceLimitTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF HWL2mcQinqSourceLimitEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table describes the configurations of IGMP snooping source limit on a QinQ interface."
+ ::= { hwL2mcQinqGroupSourceLimitInfo 2 }
+
+hwL2mcQinqSourceLimitEntry OBJECT-TYPE
+ SYNTAX HWL2mcQinqSourceLimitEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry is created for each IGMP snooping source limit on a QinQ interface."
+ INDEX { hwL2mcQinqSourceLimitPortType, hwL2mcQinqSourceLimitIfIndex, hwL2mcQinqSourceLimitPeVid,
+ hwL2mcQinqSourceLimitPeVidEnd, hwL2mcQinqSourceLimitCeVid, hwL2mcQinqSourceLimitCeVidEnd }
+ ::= { hwL2mcQinqSourceLimitTable 1 }
+
+HWL2mcQinqSourceLimitEntry ::= SEQUENCE {
+ hwL2mcQinqSourceLimitPortType HWPortType,
+ hwL2mcQinqSourceLimitIfIndex InterfaceIndexOrZero,
+ hwL2mcQinqSourceLimitPeVid VlanIdOrAny,
+ hwL2mcQinqSourceLimitPeVidEnd VlanIdOrAny,
+ hwL2mcQinqSourceLimitCeVid VlanIdOrAny,
+ hwL2mcQinqSourceLimitCeVidEnd VlanIdOrAny,
+ hwL2mcQinqSourceLimitNum Unsigned32,
+ hwL2mcQinqSourceLimitRowStatus RowStatus
+ }
+
+
+hwL2mcQinqSourceLimitPortType OBJECT-TYPE
+ SYNTAX HWPortType
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The interface type:
+ 1: Invalid
+ 5: Termination sub-interface
+ "
+ ::= { hwL2mcQinqSourceLimitEntry 1 }
+
+hwL2mcQinqSourceLimitIfIndex OBJECT-TYPE
+ SYNTAX InterfaceIndexOrZero
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The interface index. The value 0 indicates that the interface index is invalid."
+ ::= { hwL2mcQinqSourceLimitEntry 2 }
+
+hwL2mcQinqSourceLimitPeVid OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The begin of a PE VID batch.
+ The value ranges from 1 to 4095.
+ The value 4095 indicates that the PE VID is invalid.
+ "
+ ::= { hwL2mcQinqSourceLimitEntry 3 }
+
+hwL2mcQinqSourceLimitPeVidEnd OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The end of a PE VID batch.
+ The value ranges from 1 to 4095.
+ The value 4095 indicates that the PE VID is invalid.
+ "
+ ::= { hwL2mcQinqSourceLimitEntry 4 }
+
+hwL2mcQinqSourceLimitCeVid OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The begin of a CE VID batch.
+ The value ranges from 1 to 4095.
+ The value 4095 indicates that the CE VID is invalid.
+ "
+ ::= { hwL2mcQinqSourceLimitEntry 5 }
+
+hwL2mcQinqSourceLimitCeVidEnd OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The end of a CE VID batch.
+ The value ranges from 1 to 4095.
+ The value 4095 indicates that the CE VID is invalid.
+ "
+ ::= { hwL2mcQinqSourceLimitEntry 6 }
+
+hwL2mcQinqSourceLimitNum OBJECT-TYPE
+ SYNTAX Unsigned32(1..128)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The source number of a QinQ interface."
+ ::= { hwL2mcQinqSourceLimitEntry 10 }
+
+hwL2mcQinqSourceLimitRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The row status."
+ ::= { hwL2mcQinqSourceLimitEntry 100 }
+
+--
+-- The hwL2mcGeneralNotificationsObject group.
+--
+hwL2mcGeneralNotificationsObject
+ OBJECT IDENTIFIER ::= { hwIgspMibObject 33 }
+
+hwL2mcNotificationsPortVlanIndex OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095.
+ The value ranges from 1 to 4095."
+ ::= { hwL2mcGeneralNotificationsObject 1 }
+
+hwL2mcNotificationsPortVsiName OBJECT-TYPE
+ SYNTAX DisplayString(SIZE (0..31))
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "The name of a VSI. If a VLAN is specified, the value is 32."
+ ::= { hwL2mcGeneralNotificationsObject 2 }
+
+hwL2mcNotificationsPortType OBJECT-TYPE
+ SYNTAX HWPortType
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "The interface type:
+ 1: Invalid
+ 2: PW interface
+ 3: L2 interface
+ 4: Encapsulation sub-interface
+ 5: Termination sub-interface
+ 6: Interface Board
+ 7: Vlanif Port
+ "
+ ::= { hwL2mcGeneralNotificationsObject 3 }
+
+hwL2mcNotificationsPortIfIndex OBJECT-TYPE
+ SYNTAX InterfaceIndexOrZero
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "The interface index. The value 0 indicates that the interface index is invalid."
+ ::= { hwL2mcGeneralNotificationsObject 4 }
+
+hwL2mcNotificationsPortPeId OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "The PE VID of an interface.
+ The value ranges from 1 to 4095.
+ The value 4095 indicates that the PE VID is invalid.
+ "
+ ::= { hwL2mcGeneralNotificationsObject 5 }
+
+hwL2mcNotificationsPortCeId OBJECT-TYPE
+ SYNTAX VlanIdOrAny
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "The CE VID of an interface.
+ The value ranges from 1 to 4095.
+ The value 4095 indicates that the CE VID is invalid.
+ "
+ ::= { hwL2mcGeneralNotificationsObject 6 }
+
+hwL2mcNotificationsPortPeerAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "The peer IP address of a PW interface. The value 0.0.0.0 indicates that the IP address is invalid."
+ ::= { hwL2mcGeneralNotificationsObject 7 }
+
+hwL2mcNotificationsPortVcOrSiteId OBJECT-TYPE
+ SYNTAX Unsigned32(1..4294967295)
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "The VC ID or SITE ID of a PW interface."
+ ::= { hwL2mcGeneralNotificationsObject 8 }
+
+hwL2mcNotificationsPortIfName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..64))
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "The name of the interface."
+ ::= { hwL2mcGeneralNotificationsObject 9 }
+
+hwL2mcNotificationsAddressType OBJECT-TYPE
+ SYNTAX InetAddressType
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "The address type of the multicast group and source address. If this object is set to
+ unknown(0) indicates that the multicast group and source address is invalid."
+ ::= { hwL2mcGeneralNotificationsObject 10 }
+hwL2mcNotificationsExceedLimit OBJECT-TYPE
+ SYNTAX Unsigned32 (1..4294967295)
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "Limit value."
+ ::= { hwL2mcGeneralNotificationsObject 11 }
+hwL2mcNotificationsExceedGroupAddress OBJECT-TYPE
+ SYNTAX InetAddress
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "Excess group address. The InetAddressType is given by the
+ hwL2mcNotificationsAddressType object.
+ The value 0.0.0.0 indicates that the multicast entry is invalid."
+ ::= { hwL2mcGeneralNotificationsObject 12 }
+hwL2mcNotificationsExceedSourceAddress OBJECT-TYPE
+ SYNTAX InetAddress
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "Excess source address.The InetAddressType is given by the
+ hwL2mcNotificationsAddressType object.
+ The value 0.0.0.0 indicates that the multicast entry is (*, G)."
+ ::= { hwL2mcGeneralNotificationsObject 13 }
+hwL2mcNotificationsPortUserMac OBJECT-TYPE
+ SYNTAX MacAddress
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "User MAC address. The value 0000-0000-0000 indicates that the MAC address is invalid."
+ ::= { hwL2mcGeneralNotificationsObject 14 }
+--
+-- The l2 multicast Notifications.
+--
+hwL2mcGeneralNotifications
+ OBJECT IDENTIFIER ::= { hwIgspMibObject 34 }
+
+
+hwL2mcPortOtherQuerierTimeout NOTIFICATION-TYPE
+ OBJECTS { hwL2mcNotificationsPortVlanIndex,
+ hwL2mcNotificationsPortVsiName,
+ hwL2mcNotificationsPortType,
+ hwL2mcNotificationsPortIfIndex,
+ hwL2mcNotificationsPortPeId,
+ hwL2mcNotificationsPortCeId,
+ hwL2mcNotificationsPortPeerAddress,
+ hwL2mcNotificationsPortVcOrSiteId,
+ hwL2mcNotificationsPortIfName
+ }
+ STATUS current
+ DESCRIPTION
+ "A hwL2mcPortOtherQuerierTimeout notification signifies the timer of other querier of port is timeout.
+ This notification should be generated when the other querier timer expires, and the router
+ has no other querier on the same interface with the same IP version."
+ ::= { hwL2mcGeneralNotifications 1 }
+
+hwL2mcReportListeningGrpExceed NOTIFICATION-TYPE
+ OBJECTS { hwL2mcNotificationsAddressType,
+ hwL2mcNotificationsPortIfIndex,
+ hwL2mcNotificationsPortIfName,
+ hwL2mcNotificationsExceedLimit,
+ hwL2mcNotificationsExceedGroupAddress,
+ hwL2mcNotificationsExceedSourceAddress,
+ hwL2mcNotificationsPortVsiName,
+ hwL2mcNotificationsPortPeId,
+ hwL2mcNotificationsPortCeId,
+ hwL2mcNotificationsPortUserMac
+ }
+ STATUS current
+ DESCRIPTION
+ "A hwL2mcReportListeningGrpExceed notification signifies The number of multicast groups has exceeded the limit on one slot.
+ This notification should be generated when the number of multicast groups has exceeded the limit."
+ ::= { hwL2mcGeneralNotifications 2 }
+--
+-- Conformance Information
+--
+hwL2mcMibConformance OBJECT IDENTIFIER ::= { hwL2MultiCastMIB 100 }
+hwL2mcMibCompliances OBJECT IDENTIFIER ::= { hwL2mcMibConformance 1 }
+hwL2mcMibGroups OBJECT IDENTIFIER ::= { hwL2mcMibConformance 2 }
+
+hwIgspMibCompliance MODULE-COMPLIANCE
+ STATUS current
+ DESCRIPTION
+ "The compliance statement for device supporting
+ IGMP Snooping."
+ MODULE
+ MANDATORY-GROUPS{
+ hwIgspSystemInfoGroup,
+ hwL2mcCfgInfoGroup,
+ hwL2mcStatisticsInfoGroup,
+ hwL2mcFwdInfoGroup,
+ hwL2mcGroupInfoGroup,
+ hwL2mcGroupCfgInfoGroup,
+ hwL2mcSsmSourceInfoGroup,
+ hwL2mcPortGroupPolicyCfgInfoGroup,
+ hwL2mcChnlCfgInfoGroup,
+ hwL2mcLimitInfoGroup,
+ hwL2mcPortLimitInfoGroup,
+ hwL2mcFastChnlCfgInfoGroup,
+ hwL2mcRouterPortInfoGroup,
+ hwL2mcRouterPortCfgInfoGroup,
+ hwL2mcChnlGroupCfgInfoGroup,
+ hwL2mcGroupPolicyCfgInfoGroup,
+ hwL2mcChnlDenyCfgInfoGroup,
+ hwL2mcQinQPortInfoGroup,
+ hwL2mcETrackingInfoInfoGroup,
+ hwL2mcSourceGroupInfoGroup,
+ hwL2mcDTFwdInfoGroup,
+ hwL2mcDTGroupInfoGroup,
+ hwL2mcMulticastTrafficPolicyCfgInfoGroup,
+ hwL2mcRouteLearnDisablePolicyCfgInfoGroup,
+ hwL2mcTrackVRRPCfgInfoGroup,
+ hwL2mcGeneralNotificationObjectGroup,
+ hwL2mcGeneralNotificationGroup
+ }
+ ::= { hwL2mcMibCompliances 1 }
+
+hwIgspSystemInfoGroup OBJECT-GROUP
+ OBJECTS {
+ hwIgmpSnoopingEnabled,
+ hwSendQueryEnabled,
+ hwSendQuerySourceIpAddr,
+ hwL2mcCacTrapInterval,
+ hwL2mcPerformanceStatisticsInterval
+ }
+ STATUS current
+ DESCRIPTION
+ "."
+ ::= { hwL2mcMibGroups 1 }
+
+hwL2mcCfgInfoGroup OBJECT-GROUP
+ OBJECTS {
+ hwL2mcEnabled,
+ hwL2mcRouterAgingTime,
+ hwL2mcMaxQueryRespTime,
+ hwL2mcLastMemQueryInterval,
+ hwL2mcQueryInterval,
+ hwL2mcRobustCount,
+ hwL2mcCheckRouterAlert,
+ hwL2mcSendRouterAlert,
+ hwL2mcIgmpVersion,
+ hwL2mcFwdMode,
+ hwL2mcPromptLeaveEnable,
+ hwL2mcPromptLeaveAclNum,
+ hwL2mcRouterPortLearningEnable,
+ hwL2mcReportSuppressEnable,
+ hwL2mcIgmpQuerierEnable,
+ hwL2mcIgmpSsmMappingEnable,
+ hwL2mcSsmAclNum,
+ hwL2mcProxyRouterProtocolPass,
+ hwL2mcAsmSsmFlag,
+ hwL2mcSrcLifeTime,
+ hwL2mcPerformanceStatistics,
+ hwL2mcQuerierElection,
+ hwETrackEnable,
+ hwL2mcBackupQueryFwd,
+ hwL2mcBackupReportFwd,
+ hwL2mcQuerySuppress,
+ hwL2mcRtLearnRingLinkage,
+ hwL2mcIgmpIpPolicyAclNum,
+ hwL2mcIgmpSsmMappingPolicy,
+ hwL2mcRowStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "."
+ ::= { hwL2mcMibGroups 2 }
+
+hwL2mcStatisticsInfoGroup OBJECT-GROUP
+ OBJECTS {
+ hwL2mcRecvIgmpV1ReportNum,
+ hwL2mcRecvIgmpV2ReportNum,
+ hwL2mcRecvIgmpV3ReportNum,
+ hwL2mcRecvIgmpLeaveNum,
+ hwL2mcRecvIgmpV1QueryNum,
+ hwL2mcRecvIgmpV2QueryNum,
+ hwL2mcRecvIgmpV3QueryNum,
+ hwL2mcRecvPimHelloNum,
+ hwL2mcSendQueryNum,
+ hwL2mcSendQuerySourceNum,
+ hwL2mcProxyGenQueryNum,
+ hwL2mcProxyGroupQueryNum,
+ hwL2mcProxyGroupSourceQueryNum,
+ hwL2mcIgmpPacketClearStats
+ }
+ STATUS current
+ DESCRIPTION
+ "."
+ ::= { hwL2mcMibGroups 3 }
+
+hwL2mcFwdInfoGroup OBJECT-GROUP
+ OBJECTS {
+ hwL2mcFwdAddressType,
+ hwL2mcFwdHostFlag1,
+ hwL2mcFwdHostFlag2,
+ hwL2mcFwdHostFlag3,
+ hwL2mcFwdHostFlag4
+ }
+ STATUS current
+ DESCRIPTION
+ "."
+ ::= { hwL2mcMibGroups 4 }
+
+hwL2mcGroupInfoGroup OBJECT-GROUP
+ OBJECTS {
+ hwL2mcSourceUpTime,
+ hwL2mcSourceExpires,
+ hwL2mcGroupUpTime,
+ hwL2mcGroupExpires,
+ hwL2mcGroupFilterFlag,
+ hwL2mcGroupHostFlag1,
+ hwL2mcGroupHostFlag2,
+ hwL2mcGroupRowStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "."
+ ::= { hwL2mcMibGroups 5 }
+
+
+hwL2mcGroupCfgInfoGroup OBJECT-GROUP
+ OBJECTS {
+ hwGroupCfgRowStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "."
+ ::= { hwL2mcMibGroups 6 }
+
+hwL2mcSsmSourceInfoGroup OBJECT-GROUP
+ OBJECTS {
+ hwL2mcSsmSourceRowStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "."
+ ::= { hwL2mcMibGroups 7 }
+
+hwL2mcPortGroupPolicyCfgInfoGroup OBJECT-GROUP
+ OBJECTS {
+ hwPortGroupPolicyAclNum,
+ hwPortGroupPolicyIgmpVersion,
+ hwPortGroupPolicyRowStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "."
+ ::= { hwL2mcMibGroups 8 }
+
+hwL2mcChnlCfgInfoGroup OBJECT-GROUP
+ OBJECTS {
+ hwChnlCfgChnlType,
+ hwChnlCfgRowStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "."
+ ::= { hwL2mcMibGroups 9 }
+
+hwL2mcLimitInfoGroup OBJECT-GROUP
+ OBJECTS {
+ hwL2mcLimitMaxEntry,
+ hwL2mcLimitEntryCnt,
+ hwL2mcLimitMaxBandWidth,
+ hwL2mcLimitBandWidth,
+ hwL2mcLimitAcl,
+ hwL2mcLimitCfgRowStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "."
+ ::= { hwL2mcMibGroups 10 }
+
+hwL2mcPortLimitInfoGroup OBJECT-GROUP
+ OBJECTS {
+ hwPortLimitAcl,
+ hwPortLimitMaxEntry,
+ hwPortLimitEntryCnt,
+ hwPortLimitMaxBandWidth,
+ hwPortLimitBandWidth,
+ hwPortLimitCfgRowStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "."
+ ::= { hwL2mcMibGroups 11 }
+
+
+hwL2mcFastChnlCfgInfoGroup OBJECT-GROUP
+ OBJECTS {
+ hwL2mcFastChnlCfgRowStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "."
+ ::= { hwL2mcMibGroups 12 }
+
+
+hwL2mcRouterPortInfoGroup OBJECT-GROUP
+ OBJECTS {
+ hwL2mcRouterPortGroupUpTime,
+ hwL2mcRouterPortGroupExpires,
+ hwL2mcRouterPortGroupHostFlag1
+ }
+ STATUS current
+ DESCRIPTION
+ "."
+ ::= { hwL2mcMibGroups 13 }
+
+hwL2mcRouterPortCfgInfoGroup OBJECT-GROUP
+ OBJECTS {
+ hwL2mcRouterPortCfgRowStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "."
+ ::= { hwL2mcMibGroups 14 }
+
+hwL2mcChnlGroupCfgInfoGroup OBJECT-GROUP
+ OBJECTS {
+ hwChnlGroupCfgPerBand,
+ hwChnlGroupCfgRowStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "."
+ ::= { hwL2mcMibGroups 15 }
+
+hwL2mcGroupPolicyCfgInfoGroup OBJECT-GROUP
+ OBJECTS {
+ hwGroupPolicyAclNum,
+ hwGroupPolicyIgmpVersion,
+ hwGroupPolicyRowStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "."
+ ::= { hwL2mcMibGroups 16}
+
+hwL2mcChnlDenyCfgInfoGroup OBJECT-GROUP
+ OBJECTS {
+ hwChnlDenyCfg ,
+ hwChnlDenyCfgRowStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "."
+ ::= { hwL2mcMibGroups 17}
+
+hwL2mcQinQPortInfoGroup OBJECT-GROUP
+ OBJECTS {
+ hwQinQPortTime ,
+ hwQinQPortFlag
+ }
+ STATUS current
+ DESCRIPTION
+ "."
+ ::= { hwL2mcMibGroups 18}
+
+hwL2mcETrackingInfoInfoGroup OBJECT-GROUP
+ OBJECTS {
+ hwETrackInfoFlag
+ }
+ STATUS current
+ DESCRIPTION
+ "."
+ ::= { hwL2mcMibGroups 19}
+
+hwL2mcSourceGroupInfoGroup OBJECT-GROUP
+ OBJECTS {
+ hwL2mcSourceGroupStat
+ }
+ STATUS current
+ DESCRIPTION
+ "."
+ ::= { hwL2mcMibGroups 22}
+
+hwL2mcDTFwdInfoGroup OBJECT-GROUP
+ OBJECTS {
+ hwL2mcDTFwdAddressType,
+ hwL2mcDTFwdHostFlag1,
+ hwL2mcDTFwdHostFlag2,
+ hwL2mcDTFwdHostFlag3,
+ hwL2mcDTFwdHostFlag4
+ }
+ STATUS current
+ DESCRIPTION
+ "."
+ ::= { hwL2mcMibGroups 23 }
+
+hwL2mcDTGroupInfoGroup OBJECT-GROUP
+ OBJECTS {
+ hwL2mcDTSourceUpTime,
+ hwL2mcDTSourceExpires,
+ hwL2mcDTGroupUpTime,
+ hwL2mcDTGroupExpires,
+ hwL2mcDTGroupHostFlag1,
+ hwL2mcDTGroupHostFlag2,
+ hwL2mcDTGroupRowStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "."
+ ::= { hwL2mcMibGroups 24 }
+
+hwL2mcMulticastTrafficPolicyCfgInfoGroup OBJECT-GROUP
+ OBJECTS {
+ hwMulticastTrafficPolicyRowStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "."
+ ::= { hwL2mcMibGroups 25 }
+
+hwL2mcRouteLearnDisablePolicyCfgInfoGroup OBJECT-GROUP
+ OBJECTS {
+ hwRouteLearnDisablePolicyRowStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "."
+ ::= { hwL2mcMibGroups 26 }
+
+hwL2mcTrackVRRPCfgInfoGroup OBJECT-GROUP
+ OBJECTS {
+ hwTrackVRRPVridIfIndex,
+ hwTrackVRRPVridID,
+ hwTrackVRRPRowStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "."
+ ::= { hwL2mcMibGroups 27 }
+
+hwL2mcGeneralNotificationObjectGroup OBJECT-GROUP
+ OBJECTS {
+ hwL2mcNotificationsPortVlanIndex,
+ hwL2mcNotificationsPortVsiName,
+ hwL2mcNotificationsPortType,
+ hwL2mcNotificationsPortIfIndex,
+ hwL2mcNotificationsPortPeId,
+ hwL2mcNotificationsPortCeId,
+ hwL2mcNotificationsPortPeerAddress,
+ hwL2mcNotificationsPortVcOrSiteId,
+ hwL2mcNotificationsPortIfName,
+ hwL2mcNotificationsAddressType,
+ hwL2mcNotificationsExceedLimit,
+ hwL2mcNotificationsExceedGroupAddress,
+ hwL2mcNotificationsExceedSourceAddress,
+ hwL2mcNotificationsPortUserMac
+ }
+ STATUS current
+ DESCRIPTION
+ "."
+ ::= { hwL2mcMibGroups 28 }
+
+hwL2mcGeneralNotificationGroup NOTIFICATION-GROUP
+ NOTIFICATIONS {
+ hwL2mcPortOtherQuerierTimeout,
+ hwL2mcReportListeningGrpExceed
+ }
+ STATUS current
+ DESCRIPTION
+ "."
+ ::= { hwL2mcMibGroups 29 }
+
+
+END
\ No newline at end of file |