Initial commitHEADmain

1 files changed, 1321 insertions, 0 deletions

diff --git a/MIBS/hp/BLADETYPE2-ACL-MIB b/MIBS/hp/BLADETYPE2-ACL-MIB
new file mode 100644
index 0000000..dd54d7e
--- /dev/null
+++ b/MIBS/hp/BLADETYPE2-ACL-MIB
@@ -0,0 +1,1321 @@
+-- COPYRIGHT NOTICE
+-- Copyright (c) Hewlett Packard Company, 2005
+-- All rights reserved
+-- 
+--
+
+BLADETYPE2-ACL-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32, IpAddress
+        FROM SNMPv2-SMI
+    MacAddress
+        FROM SNMPv2-TC
+    hpSwitchBladeType2-Mgmt 
+        FROM HP-SWITCH-PL-MIB
+    ;
+
+acl MODULE-IDENTITY
+    LAST-UPDATED "200510120000Z" --  12 October 2005
+    ORGANIZATION "Hewlett Packard Company"
+    CONTACT-INFO "customerservice@hp.com"
+    DESCRIPTION
+        "The MIB module for the Access Control List configuration
+         and statistics."
+    ::= { hpSwitchBladeType2-Mgmt 9 }
+
+-- MIB_INSERT_START
+-- ----------------------------------------------------------------------------
+-- { INSERT:  bt2acl
+-- ----------------------------------------------------------------------------
+
+acConfig   OBJECT IDENTIFIER ::= { acl 1 }
+
+acList      OBJECT IDENTIFIER ::= { acConfig 1 }
+aclBlock    OBJECT IDENTIFIER ::= { acConfig 2 }
+aclGroup    OBJECT IDENTIFIER ::= { acConfig 3 }
+
+-- ---------------------------------------------------------- --
+-- Access Control List (ACL) Configuration
+-- ---------------------------------------------------------- --
+
+aclCurCfgTable  OBJECT-TYPE
+    SYNTAX      SEQUENCE OF AclCurCfgEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The table of current ACL configuration."
+    ::= { acList 1 }
+
+aclCurCfgEntry  OBJECT-TYPE
+    SYNTAX      AclCurCfgEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Current information about a particular ACL configuration entry."
+    INDEX { aclCurCfgIndex }
+    ::= { aclCurCfgTable 1 }
+
+AclCurCfgEntry  ::= SEQUENCE {
+    aclCurCfgIndex              Unsigned32,
+    aclCurCfgBlock              Unsigned32,
+    aclCurCfgGroup              Unsigned32,
+    aclCurCfgFilterAction       INTEGER,
+    aclCurCfgFilterActionSetCOS INTEGER,
+    aclCurCfgEthFmt             INTEGER,
+    aclCurCfgTagFmt             INTEGER,
+    aclCurCfgSrcMACAddress      MacAddress,
+    aclCurCfgSrcMACMask         MacAddress,
+    aclCurCfgDstMACAddress      MacAddress,
+    aclCurCfgDstMACMask         MacAddress,
+    aclCurCfgEthernetTypeName   INTEGER,
+    aclCurCfgEthernetTypeValue  INTEGER,
+    aclCurCfgVLanId             INTEGER,
+    aclCurCfgVLanMask           INTEGER,
+    aclCurCfg8021pPriority      INTEGER,
+    aclCurCfgTypeOfService      INTEGER,
+    aclCurCfgProtocol           INTEGER,
+    aclCurCfgSrcIPAddress       IpAddress,
+    aclCurCfgSrcIPMask          IpAddress,
+    aclCurCfgDstIPAddress       IpAddress,
+    aclCurCfgDstIPMask          IpAddress,
+    aclCurCfgSrcPort            INTEGER,
+    aclCurCfgSrcPortMask        INTEGER,
+    aclCurCfgDstPort            INTEGER,
+    aclCurCfgDstPortMask        INTEGER,
+    aclCurCfgTCPFlags           BITS,
+    aclCurCfgTCPFlagsMask       BITS,
+    aclCurCfgEgressPorts        OCTET STRING,
+    aclCurCfgStatistics         INTEGER
+    }
+
+aclCurCfgIndex  OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  not-accessible 
+    STATUS      current
+    DESCRIPTION
+        "The index associated with this ACL entry."
+    ::= { aclCurCfgEntry 1 }
+
+aclCurCfgBlock  OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The index of the ACL block to which this ACL entry is a member of.
+        A value of zero means the ACL is not a member of any block."
+    ::= { aclCurCfgEntry 2 }
+
+aclCurCfgGroup  OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The index of the ACL group to which this ACL entry is a member of.
+        A value of zero means the ACL is not a member of any group."
+    ::= { aclCurCfgEntry 3 }
+
+aclCurCfgFilterAction  OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    none(0),
+                    permit(1),
+                    deny(2),
+                    setcos(3)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The action to be performed on a packet that matches the filter
+        settings of this ACL entry."
+    ::= { aclCurCfgEntry 4 }
+
+aclCurCfgFilterActionSetCOS  OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    none(0),
+                    cos0(1),
+                    cos1(2),
+                    cos2(3),
+                    cos3(4),
+                    cos4(5),
+                    cos5(6),
+                    cos6(7),
+                    cos7(8)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The value to be used when the action to be performed is setCOS
+        for this ACL entry."
+    ::= { aclCurCfgEntry 5 }
+
+aclCurCfgEthFmt  OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    none(0),
+                    ethernet2(1),
+                    snap(2),
+                    llc(3),
+                    ieee802dot3(4)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The packet ethernet format to be filtered."
+    ::= { aclCurCfgEntry 6 }
+
+aclCurCfgTagFmt  OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    untagged(1),
+                    tagged(2)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The packet tag format to be filtered."
+    ::= { aclCurCfgEntry 7 }
+
+aclCurCfgSrcMACAddress  OBJECT-TYPE
+    SYNTAX      MacAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The source MAC address to be filtered."
+    ::= { aclCurCfgEntry 9 }
+
+aclCurCfgSrcMACMask  OBJECT-TYPE
+    SYNTAX      MacAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The address mask applied to aclCurCfgSrcMACAddress for filtering."
+    ::= { aclCurCfgEntry 10 }
+
+aclCurCfgDstMACAddress  OBJECT-TYPE
+    SYNTAX      MacAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The destination MAC address to be filtered."
+    ::= { aclCurCfgEntry 11 }
+
+aclCurCfgDstMACMask  OBJECT-TYPE
+    SYNTAX      MacAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The address mask applied to aclCurCfgDstMACAddress for filtering."
+    ::= { aclCurCfgEntry 12 }
+
+aclCurCfgEthernetTypeName  OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    none(0),
+                    arp(1),
+                    ipv4(2),
+                    ipv6(3),
+                    mpls(4),
+                    rarp(5),
+                    any(6),
+                    other(7)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The Ethernet type to be filtered. If the value of this
+        object is other(7), the value of aclNewCfgEthernetTypeValue
+        indicates the ethernet type that will be filtered."
+    ::= { aclCurCfgEntry 13 }
+
+aclCurCfgEthernetTypeValue  OBJECT-TYPE
+    SYNTAX      INTEGER (0..65535)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The Ethernet type value to be filtered. The value of this
+        object is equivalent to the value of aclNewCfgEthernetTypeName
+        except when the value of aclNewCfgEthernetTypeName is other(7),
+        which can be any user-defined value for this object."
+    ::= { aclCurCfgEntry 14 }
+
+aclCurCfgVLanId  OBJECT-TYPE
+    SYNTAX      INTEGER (0..4095)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The virtual LAN identifier to be filtered."
+    ::= { aclCurCfgEntry 15 }
+
+aclCurCfgVLanMask  OBJECT-TYPE
+    SYNTAX      INTEGER (0..4095)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The mask applied to aclCurCfgVLanId for filtering."
+    ::= { aclCurCfgEntry 16 }
+
+aclCurCfg8021pPriority  OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    none(0),
+                    priority0(1),
+                    priority1(2),
+                    priority2(3),
+                    priority3(4),
+                    priority4(5),
+                    priority5(6),
+                    priority6(7),
+                    priority7(8)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The 802.1p priority to be filtered."
+    ::= { aclCurCfgEntry 17 }
+
+aclCurCfgTypeOfService  OBJECT-TYPE
+    SYNTAX      INTEGER (0..255)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The type of service to be filtered."
+    ::= { aclCurCfgEntry 18 }
+
+aclCurCfgProtocol  OBJECT-TYPE
+    SYNTAX      INTEGER (0..255)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The protocol to be filtered."
+    ::= { aclCurCfgEntry 19 }
+
+aclCurCfgSrcIPAddress  OBJECT-TYPE
+    SYNTAX      IpAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The source IP address to be filtered."
+    ::= { aclCurCfgEntry 20 }
+
+aclCurCfgSrcIPMask  OBJECT-TYPE
+    SYNTAX      IpAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The address mask applied to aclCurCfgSrcIPAddress for filtering."
+    ::= { aclCurCfgEntry 21 }
+
+aclCurCfgDstIPAddress  OBJECT-TYPE
+    SYNTAX      IpAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The destination IP address to be filtered."
+    ::= { aclCurCfgEntry 22 }
+
+aclCurCfgDstIPMask  OBJECT-TYPE
+    SYNTAX      IpAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The address mask applied to aclCurCfgDstIPAddress for filtering."
+    ::= { aclCurCfgEntry 23 }
+
+aclCurCfgSrcPort  OBJECT-TYPE
+    SYNTAX      INTEGER (0..65535)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The source TCP/UDP port number to be filtered."
+    ::= { aclCurCfgEntry 24 }
+
+aclCurCfgSrcPortMask  OBJECT-TYPE
+    SYNTAX      INTEGER (0..65535)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The mask applied to aclCurCfgSrcPort for filtering."
+    ::= { aclCurCfgEntry 25 }
+
+aclCurCfgDstPort  OBJECT-TYPE
+    SYNTAX      INTEGER (0..65535)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The destination TCP/UDP port number to be filtered."
+    ::= { aclCurCfgEntry 26 }
+
+aclCurCfgDstPortMask  OBJECT-TYPE
+    SYNTAX      INTEGER (0..65535)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The mask applied to aclCurCfgDstPort for filtering."
+    ::= { aclCurCfgEntry 27 }
+
+aclCurCfgTCPFlags  OBJECT-TYPE
+    SYNTAX      BITS {
+                    reserved1(0),
+                    reserved2(1),
+                    tcpURG(2),
+                    tcpACK(3),
+                    tcpPSH(4),
+                    tcpRST(5),
+                    tcpSYN(6),
+                    tcpFIN(7)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The TCP flags to be filtered.
+         OCTET
+         xxxxxxxx
+         ||||..||
+         ||||..||_tcpFIN(7)
+         ||||..|__tcpSYN(6)
+         ||||
+         ||||_____tcpACK(3)
+         |||______tcpURG(2)
+         ||_______reserved2(1)
+         |________reserved1(0)
+
+         where:
+         - reserved1 - 0;
+         - reserved2 - 0;
+         - x - 0 or 1;
+        "
+    ::= { aclCurCfgEntry 28 }
+
+aclCurCfgTCPFlagsMask  OBJECT-TYPE
+    SYNTAX      BITS {
+                    reserved1(0),
+                    reserved2(1),
+                    tcpURG(2),
+                    tcpACK(3),
+                    tcpPSH(4),
+                    tcpRST(5),
+                    tcpSYN(6),
+                    tcpFIN(7)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The TCP flags mask.
+         OCTET
+         xxxxxxxx
+         ||||..||
+         ||||..||_tcpFIN(7)
+         ||||..|__tcpSYN(6)
+         ||||
+         ||||_____tcpACK(3)
+         |||______tcpURG(2)
+         ||_______reserved2(1)
+         |________reserved1(0)
+
+         where:
+         - reserved1 - 0;
+         - reserved2 - 0;
+         - x - 0 or 1;
+        "
+    ::= { aclCurCfgEntry 39 }
+
+aclCurCfgEgressPorts  OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The port list in the ACL configured for egress filtering.
+         The ports are presented in bitmap format, as follows:
+
+            OCTET 1  OCTET 2  .....
+            xxxxxxxx xxxxxxxx .....
+            ||    || |
+            ||    || |_ port 9
+            ||    ||
+            ||    ||___ port 8
+            ||    |____ port 7
+            ||      .    .   .
+            ||_________ port 2
+            |__________ port 1
+
+         where x:
+            1 - the represented port is configured for filtering.
+            0 - the represented port is not configured for filtering."
+    ::= { aclCurCfgEntry 29 }
+
+aclCurCfgStatistics  OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    disable(0),
+                    enable(1)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Whether statistics collection for this ACL is enabled or not."
+    ::= { aclCurCfgEntry 30 }
+
+
+--
+-- New ACL Configuration Table
+--
+
+aclNewCfgTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF AclNewCfgEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The table of new ACL configuration."
+    ::= { acList 2 }
+
+aclNewCfgEntry OBJECT-TYPE
+    SYNTAX      AclNewCfgEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "New information about a particular ACL configuration."
+    INDEX { aclNewCfgIndex }
+    ::= { aclNewCfgTable 1 }
+
+AclNewCfgEntry ::= SEQUENCE {
+    aclNewCfgIndex              Unsigned32,
+    aclNewCfgBlock              Unsigned32,
+    aclNewCfgGroup              Unsigned32,
+    aclNewCfgFilterAction       INTEGER,
+    aclNewCfgFilterActionSetCOS INTEGER,
+    aclNewCfgEthFmt       INTEGER,
+    aclNewCfgTagFmt       INTEGER,
+    aclNewCfgSrcMACAddress      MacAddress,
+    aclNewCfgSrcMACMask         MacAddress,
+    aclNewCfgDstMACAddress      MacAddress,
+    aclNewCfgDstMACMask         MacAddress,
+    aclNewCfgEthernetTypeName   INTEGER,
+    aclNewCfgEthernetTypeValue  INTEGER,
+    aclNewCfgVLanId             INTEGER,
+    aclNewCfgVLanMask           INTEGER,
+    aclNewCfg8021pPriority      INTEGER,
+    aclNewCfgTypeOfService      INTEGER,
+    aclNewCfgProtocol           INTEGER,
+    aclNewCfgSrcIPAddress       IpAddress,
+    aclNewCfgSrcIPMask          IpAddress,
+    aclNewCfgDstIPAddress       IpAddress,
+    aclNewCfgDstIPMask          IpAddress,
+    aclNewCfgSrcPort            INTEGER,
+    aclNewCfgSrcPortMask        INTEGER,
+    aclNewCfgDstPort            INTEGER,
+    aclNewCfgDstPortMask        INTEGER,
+    aclNewCfgTCPFlags           BITS,
+    aclNewCfgTCPFlagsMask       BITS,
+    aclNewCfgEgressPorts        OCTET STRING,
+    aclNewCfgStatistics         INTEGER,
+    aclNewCfgAddEgressPort      Unsigned32,
+    aclNewCfgRemoveEgressPort   Unsigned32,
+    aclNewCfgDelete             INTEGER
+    }
+
+aclNewCfgIndex  OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  not-accessible 
+    STATUS      current
+    DESCRIPTION
+        "The index associated with this ACL entry."
+    ::= { aclNewCfgEntry 1 }
+
+aclNewCfgBlock  OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The index of the ACL block to which this ACL entry is a member of.
+        A value of zero means the ACL is not a member of any block."
+    ::= { aclNewCfgEntry 2 }
+
+aclNewCfgGroup  OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The index of the ACL group to which this ACL entry is a member of.
+        A value of zero means the ACL is not a member of any group."
+    ::= { aclNewCfgEntry 3 }
+
+aclNewCfgFilterAction  OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    none(0),
+                    permit(1),
+                    deny(2),
+                    setcos(3)
+                }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The action to be performed on a packet that matches the filter
+        settings of this ACL entry."
+    ::= { aclNewCfgEntry 4 }
+
+aclNewCfgFilterActionSetCOS  OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    none(0),
+                    cos0(1),
+                    cos1(2),
+                    cos2(3),
+                    cos3(4),
+                    cos4(5),
+                    cos5(6),
+                    cos6(7),
+                    cos7(8)
+                }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The COS queue to be used when the action for this ACL entry is
+        set to SetCOS."
+    ::= { aclNewCfgEntry 5 }
+
+aclNewCfgEthFmt  OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    none(0),
+                    ethernet2(1),
+                    snap(2),
+                    llc(3),
+                    ieee802dot3(4)
+                }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The packet ethernet format to be filtered."
+    ::= { aclNewCfgEntry 6 }
+
+aclNewCfgTagFmt  OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    none(1),
+                    tagged(2)
+                }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The packet tagging format to be filtered."
+    ::= { aclNewCfgEntry 7 }
+
+aclNewCfgSrcMACAddress  OBJECT-TYPE
+    SYNTAX      MacAddress
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The source MAC address to be filtered. Whenever this object is
+        set to a nonzero value, the aclNewCfgSrcMACMask object, if not
+        yet set, will be automatically set to ff:ff:ff:ff:ff."
+    ::= { aclNewCfgEntry 9 }
+
+aclNewCfgSrcMACMask  OBJECT-TYPE
+    SYNTAX      MacAddress
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The address mask to be applied to aclNewCfgSrcMACAddress
+         for filtering."
+    ::= { aclNewCfgEntry 10 }
+
+aclNewCfgDstMACAddress  OBJECT-TYPE
+    SYNTAX      MacAddress
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The destination MAC address to be filtered. Whenever this object
+        is set to a nonzero value, the aclNewCfgDstMACMask object, if not
+        yet set, will be automatically set to ff:ff:ff:ff:ff."
+    ::= { aclNewCfgEntry 11 }
+
+aclNewCfgDstMACMask  OBJECT-TYPE
+    SYNTAX      MacAddress
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The address mask to be applied to aclNewCfgDstMACAddress
+         for filtering."
+    ::= { aclNewCfgEntry 12 }
+
+aclNewCfgEthernetTypeName  OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    none(0),
+                    arp(1),
+                    ipv4(2),
+                    ipv6(3),
+                    mpls(4),
+                    rarp(5),
+                    any(6),
+                    other(7)
+                }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The Ethernet type to be filtered. If the value of this
+        object is other(7), the value of aclNewCfgEthernetTypeValue
+        indicates the ethernet type that will be filtered. If this
+        object is set to a value other than other(7), the value of
+        the aclNewCfgEthernetTypeValue object is automatically set,
+        as follows:
+
+        aclNewCfgEthernetTypeName   aclNewCfgEthernetTypeValue
+            none(0)                         0
+            arp(1)                       2054  (0x0806)
+            ipv4(2)                      2048  (0x0800)
+            ipv6(3)                     34525  (0x86dd)
+            mpls(4)                     34887  (0x8847)
+            rarp(5)                     32821  (0x8035)
+            any(6)                      65535  (0xffff)
+        "
+    ::= { aclNewCfgEntry 13 }
+
+aclNewCfgEthernetTypeValue  OBJECT-TYPE
+    SYNTAX      INTEGER (0..65535)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The Ethernet type value to be filtered. The value of this
+        object is equivalent to the value of aclNewCfgEthernetTypeName
+        except when the value of aclNewCfgEthernetTypeName is other(7),
+        which can be any user-defined value for this object."
+    ::= { aclNewCfgEntry 14 }
+
+aclNewCfgVLanId  OBJECT-TYPE
+    SYNTAX      INTEGER (1..4095)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The virtual LAN identifier to be filtered. Whenever this object
+        is set to a nonzero value, the aclNewCfgVLanMask object, if not
+        yet set, will be automatically set to 4095 (0xfff)."
+    ::= { aclNewCfgEntry 15 }
+
+aclNewCfgVLanMask  OBJECT-TYPE
+    SYNTAX      INTEGER (0..4095)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The mask to be applied to aclNewCfgVLanId for filtering."
+    ::= { aclNewCfgEntry 16 }
+
+aclNewCfg8021pPriority  OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    none(0),
+                    priority0(1),
+                    priority1(2),
+                    priority2(3),
+                    priority3(4),
+                    priority4(5),
+                    priority5(6),
+                    priority6(7),
+                    priority7(8)
+                }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The 802.1p priority to be filtered."
+    ::= { aclNewCfgEntry 17 }
+
+aclNewCfgTypeOfService  OBJECT-TYPE
+    SYNTAX      INTEGER (0..255)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The type of service to be filtered."
+    ::= { aclNewCfgEntry 18 }
+
+aclNewCfgProtocol  OBJECT-TYPE
+    SYNTAX      INTEGER (0..255)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The protocol to be filtered."
+    ::= { aclNewCfgEntry 19 }
+
+aclNewCfgSrcIPAddress  OBJECT-TYPE
+    SYNTAX      IpAddress
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The source IP address to be filtered. Whenever this object is set
+        to a nonzero value, the aclNewCfgSrcIPMask object, if not yet set,
+        will be automatically set to 255.255.255.255."
+    ::= { aclNewCfgEntry 20 }
+
+aclNewCfgSrcIPMask  OBJECT-TYPE
+    SYNTAX      IpAddress
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The address mask to be applied to aclNewCfgSrcIPAddress
+         for filtering."
+    ::= { aclNewCfgEntry 21 }
+
+aclNewCfgDstIPAddress  OBJECT-TYPE
+    SYNTAX      IpAddress
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The destination IP address to be filtered. Whenever this object is set
+        to a nonzero value, the aclNewCfgDstIPMask object, if not yet set,
+        will be automatically set to 255.255.255.255."
+    ::= { aclNewCfgEntry 22 }
+
+aclNewCfgDstIPMask  OBJECT-TYPE
+    SYNTAX      IpAddress
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The address mask to be applied to aclNewCfgDstIPAddress for filtering."
+    ::= { aclNewCfgEntry 23 }
+
+aclNewCfgSrcPort  OBJECT-TYPE
+    SYNTAX      INTEGER (1..65535)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The source TCP/UDP port number to be filtered. Whenever this
+        object is set if the aclNewCfgSrcPortMask object is not set
+        will be automatically set to 65535 (0xffff)."
+    ::= { aclNewCfgEntry 24 }
+
+aclNewCfgSrcPortMask  OBJECT-TYPE
+    SYNTAX      INTEGER (0..65535)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The mask to be applied to aclNewCfgSrcPort for filtering."
+    ::= { aclNewCfgEntry 25 }
+
+aclNewCfgDstPort  OBJECT-TYPE
+    SYNTAX      INTEGER (1..65535)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The destination TCP/UDP port number to be filtered.  Whenever this
+        object is set the aclNewCfgSrcPortMask object, if not yet set, will 
+        be automatically set to 65535 (0xffff)."
+    ::= { aclNewCfgEntry 26 }
+
+aclNewCfgDstPortMask  OBJECT-TYPE
+    SYNTAX      INTEGER (0..65535)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The mask to be applied to aclNewCfgDstPort for filtering."
+    ::= { aclNewCfgEntry 27 }
+
+aclNewCfgTCPFlags  OBJECT-TYPE
+    SYNTAX      BITS {
+                    reserved1(0),
+                    reserved2(1),
+                    tcpURG(2),
+                    tcpACK(3),
+                    tcpPSH(4),
+                    tcpRST(5),
+                    tcpSYN(6),
+                    tcpFIN(7)
+                }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The TCP flags to be filtered.
+         The TCP flags are presented in bitmap format, as follows:
+         OCTET
+         xxxxxxxx
+         ||||..||
+         ||||..||_tcpFIN(7)
+         ||||..|__tcpSYN(6)
+         ||||
+         ||||_____tcpACK(3)
+         |||______tcpURG(2)
+         ||_______reserved2(1)
+         |________reserved1(0)
+
+         where:
+         - reserved1 - 0;
+         - reserved2 - 0;
+         - x - 0 or 1;
+        "
+    ::= { aclNewCfgEntry 28 }
+
+aclNewCfgTCPFlagsMask  OBJECT-TYPE
+    SYNTAX      BITS {
+                    reserved1(0),
+                    reserved2(1),
+                    tcpURG(2),
+                    tcpACK(3),
+                    tcpPSH(4),
+                    tcpRST(5),
+                    tcpSYN(6),
+                    tcpFIN(7)
+                }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The TCP flags mask.
+         The TCP flags are presented in bitmap format, as follows:
+         OCTET
+         xxxxxxxx
+         ||||..||
+         ||||..||_tcpFIN(7)
+         ||||..|__tcpSYN(6)
+         ||||
+         ||||_____tcpACK(3)
+         |||______tcpURG(2)
+         ||_______reserved2(1)
+         |________reserved1(0)
+
+         where:
+         - reserved1 - 0;
+         - reserved2 - 0;
+         - x - 0 or 1;
+         Default value is 0x3f."
+    ::= { aclNewCfgEntry 39 }
+
+aclNewCfgEgressPorts  OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The port list in the ACL configured for egress filtering.
+         The ports are presented in bitmap format, as follows:
+
+            OCTET 1  OCTET 2  .....
+            xxxxxxxx xxxxxxxx .....
+            ||    || |
+            ||    || |_ port 9
+            ||    ||
+            ||    ||___ port 8
+            ||    |____ port 7
+            ||      .    .   .
+            ||_________ port 2
+            |__________ port 1
+
+         where x:
+            1 - the represented port is configured for filtering.
+            0 - the represented port is not configured for filtering."
+    ::= { aclNewCfgEntry 29 }
+
+aclNewCfgStatistics  OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    disable(0),
+                    enable(1)
+                }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "Whether statistics collection for this ACL is enabled or not."
+    ::= { aclNewCfgEntry 30 }
+
+aclNewCfgAddEgressPort OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The port to be added to the specified ACL for egress filtering.
+        A value of zero is always returned when this object is read."
+    ::= { aclNewCfgEntry 31 }
+
+aclNewCfgRemoveEgressPort OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The port to be removed from the specified ACL.  A value of zero
+        is always returned when this object is read."
+    ::= { aclNewCfgEntry 32 }
+
+aclNewCfgDelete OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    other(1),
+                    delete(2)
+                }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "This is an action object to delete an ACL entry.  A value of
+        other(1) is always returned when this object is read."
+    ::= { aclNewCfgEntry 33 }
+
+
+-- ---------------------------------------------------------- --
+-- ACL Block Configuration
+-- ---------------------------------------------------------- --
+
+aclBlockCurCfgTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF AclBlockCurCfgEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The table of current ACL block configuration."
+    ::= { aclBlock 1 }
+
+aclBlockCurCfgEntry OBJECT-TYPE
+    SYNTAX      AclBlockCurCfgEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Current information about a particular ACL block configuration."
+    INDEX { aclBlockCurCfgIndex }
+    ::= { aclBlockCurCfgTable 1 }
+
+AclBlockCurCfgEntry ::= SEQUENCE {
+    aclBlockCurCfgIndex        Unsigned32,
+    aclBlockCurCfgMemberAcls   OCTET STRING
+    }
+
+aclBlockCurCfgIndex  OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  not-accessible 
+    STATUS      current
+    DESCRIPTION
+        "The index associated with this ACL block entry."
+    ::= { aclBlockCurCfgEntry 1 }
+
+aclBlockCurCfgMemberAcls  OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The ACL members of this ACL block, presented in bitmap
+         format, as follows:
+
+            OCTET 1  OCTET 2  .....
+            xxxxxxxx xxxxxxxx .....
+            ||    || |
+            ||    || |_ ACL 9
+            ||    ||
+            ||    ||___ ACL 8
+            ||    |____ ACL 7
+            ||      .    .   .
+            ||_________ ACL 2
+            |__________ ACL 1
+
+         where x:
+            1 - the represented ACL is a member of the block.
+            0 - the represented ACL is not a member of the block."
+    ::= { aclBlockCurCfgEntry 2 }
+
+aclBlockNewCfgTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF AclBlockNewCfgEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The table of new ACL block configuration."
+    ::= { aclBlock 2 }
+
+aclBlockNewCfgEntry OBJECT-TYPE
+    SYNTAX      AclBlockNewCfgEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "New information about a particular ACL block configuration."
+    INDEX { aclBlockNewCfgIndex }
+    ::= { aclBlockNewCfgTable 1 }
+
+AclBlockNewCfgEntry ::= SEQUENCE {
+    aclBlockNewCfgIndex        Unsigned32,
+    aclBlockNewCfgMemberAcls   OCTET STRING,
+    aclBlockNewCfgAddAcl       Unsigned32,
+    aclBlockNewCfgRemoveAcl    Unsigned32,
+    aclBlockNewCfgDelete       INTEGER
+    }
+
+aclBlockNewCfgIndex  OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  not-accessible 
+    STATUS      current
+    DESCRIPTION
+        "The index associated with this ACL block entry."
+    ::= { aclBlockNewCfgEntry 1 }
+
+aclBlockNewCfgMemberAcls  OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The ACL members of this ACL block, presented in bitmap
+         format, as follows:
+
+            OCTET 1  OCTET 2  .....
+            xxxxxxxx xxxxxxxx .....
+            ||    || |
+            ||    || |_ ACL 9
+            ||    ||
+            ||    ||___ ACL 8
+            ||    |____ ACL 7
+            ||      .    .   .
+            ||_________ ACL 2
+            |__________ ACL 1
+
+         where x:
+            1 - the represented ACL is a member of the block.
+            0 - the represented ACL is not a member of the block."
+    ::= { aclBlockNewCfgEntry 2 }
+
+aclBlockNewCfgAddAcl  OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The index of the ACL entry to be added into this ACL block.
+        A successful set operation on this object will also set the bit
+        corresponding to the ACL entry in the aclBlockNewCfgMemberAcls
+        bitmap. A value of zero is always returned when this object
+        is read."
+    ::= { aclBlockNewCfgEntry 3 }
+
+aclBlockNewCfgRemoveAcl  OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The index of the ACL entry to be removed from this ACL block.
+        A successful set operation on this object will unset the bit
+        corresponding to the ACL entry in the aclBlockNewCfgMemberAcls
+        bitmap. A value of zero is always returned when this object
+        is read."
+    ::= { aclBlockNewCfgEntry 4 }
+
+aclBlockNewCfgDelete  OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    other(1),
+                    delete(2)
+                }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "This is an action object to delete an ACL block.  A value of
+        other(1) is always returned when this object is read."
+    ::= { aclBlockNewCfgEntry 5 }
+
+
+-- ---------------------------------------------------------- --
+-- ACL Group Configuration
+-- ---------------------------------------------------------- --
+
+aclGroupCurCfgTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF AclGroupCurCfgEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The table of current ACL Group configuration."
+    ::= { aclGroup 1 }
+
+aclGroupCurCfgEntry OBJECT-TYPE
+    SYNTAX      AclGroupCurCfgEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Information about a particular ACL configuration."
+    INDEX { aclGroupCurCfgIndex }
+    ::= { aclGroupCurCfgTable 1 }
+
+AclGroupCurCfgEntry ::= SEQUENCE {
+    aclGroupCurCfgIndex        Unsigned32,
+    aclGroupCurCfgMemberAcls   OCTET STRING,
+    aclGroupCurCfgMemberBlocks OCTET STRING
+    }
+
+aclGroupCurCfgIndex  OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  not-accessible 
+    STATUS      current
+    DESCRIPTION
+        "The index associated with this ACL Group entry."
+    ::= { aclGroupCurCfgEntry 1 }
+
+aclGroupCurCfgMemberAcls  OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The ACL members of this ACL group, presented in bitmap
+         format, as follows:
+
+            OCTET 1  OCTET 2  .....
+            xxxxxxxx xxxxxxxx .....
+            ||    || |
+            ||    || |_ ACL 9
+            ||    ||
+            ||    ||___ ACL 8
+            ||    |____ ACL 7
+            ||      .    .   .
+            ||_________ ACL 2
+            |__________ ACL 1
+
+         where x:
+            1 - the represented ACL is a member of the group.
+            0 - the represented ACL is not a member of the group."
+    ::= { aclGroupCurCfgEntry 2 }
+
+aclGroupCurCfgMemberBlocks  OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The ACL block members of this ACL group, presented in bitmap
+         format, as follows:
+
+            OCTET 1  OCTET 2  .....
+            xxxxxxxx xxxxxxxx .....
+            ||    || |
+            ||    || |_ ACL Block 9
+            ||    ||
+            ||    ||___ ACL Block 8
+            ||    |____ ACL Block 7
+            ||      .    .   .   .
+            ||_________ ACL Block 2
+            |__________ ACL Block 1
+
+         where x:
+            1 - the represented ACL block is a member of the group.
+            0 - the represented ACL block is not a member of the group."
+    ::= { aclGroupCurCfgEntry 3 }
+
+aclGroupNewCfgTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF AclGroupNewCfgEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The table of new ACL Group configuration."
+    ::= { aclGroup 2 }
+
+aclGroupNewCfgEntry OBJECT-TYPE
+    SYNTAX      AclGroupNewCfgEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "New information about a particular ACL configuration."
+    INDEX { aclGroupNewCfgIndex }
+    ::= { aclGroupNewCfgTable 1 }
+
+AclGroupNewCfgEntry ::= SEQUENCE {
+    aclGroupNewCfgIndex        Unsigned32,
+    aclGroupNewCfgMemberAcls   OCTET STRING,
+    aclGroupNewCfgMemberBlocks OCTET STRING,
+    aclGroupNewCfgAddAcl       Unsigned32,
+    aclGroupNewCfgRemoveAcl    Unsigned32,
+    aclGroupNewCfgAddBlock     Unsigned32,
+    aclGroupNewCfgRemoveBlock  Unsigned32,
+    aclGroupNewCfgDelete       INTEGER
+    }
+
+aclGroupNewCfgIndex  OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  not-accessible 
+    STATUS      current
+    DESCRIPTION
+        "The index associated with this ACL Group entry."
+    ::= { aclGroupNewCfgEntry 1 }
+
+aclGroupNewCfgMemberAcls  OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The ACL members of this ACL group, presented in bitmap
+         format, as follows:
+
+            OCTET 1  OCTET 2  .....
+            xxxxxxxx xxxxxxxx .....
+            ||    || |
+            ||    || |_ ACL 9
+            ||    ||
+            ||    ||___ ACL 8
+            ||    |____ ACL 7
+            ||      .    .   .
+            ||_________ ACL 2
+            |__________ ACL 1
+
+         where x:
+            1 - the represented ACL is a member of the group.
+            0 - the represented ACL is not a member of the group."
+    ::= { aclGroupNewCfgEntry 2 }
+
+aclGroupNewCfgMemberBlocks  OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The ACL block members of this ACL group, presented in bitmap
+         format, as follows:
+
+            OCTET 1  OCTET 2  .....
+            xxxxxxxx xxxxxxxx .....
+            ||    || |
+            ||    || |_ ACL Block 9
+            ||    ||
+            ||    ||___ ACL Block 8
+            ||    |____ ACL Block 7
+            ||      .    .   .   .
+            ||_________ ACL Block 2
+            |__________ ACL Block 1
+
+         where x:
+            1 - the represented ACL block is a member of the group.
+            0 - the represented ACL block is not a member of the group."
+    ::= { aclGroupNewCfgEntry 3 }
+
+aclGroupNewCfgAddAcl  OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The index of the ACL entry to be added into this ACL group.
+        A successful set operation on this object will also set the bit
+        corresponding to the ACL entry in the aclGroupNewCfgMemberAcls
+        bitmap. A value of zero is always returned when this object
+        is read."
+    ::= { aclGroupNewCfgEntry 4 }
+
+aclGroupNewCfgRemoveAcl  OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The index of the ACL entry to be removed from this ACL group.
+        A successful set operation on this object will unset the bit
+        corresponding to the ACL entry in the aclGroupNewCfgMemberAcls
+        bitmap. A value of zero is always returned when this object
+        is read."
+    ::= { aclGroupNewCfgEntry 5 }
+
+aclGroupNewCfgAddBlock  OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The index of the ACL block entry to be added into this ACL group.
+        A successful set operation on this object will also set the bit
+        corresponding to the ACL block entry in the aclGroupNewCfgMemberBlocks
+        bitmap. A value of zero is always returned when this object
+        is read."
+    ::= { aclGroupNewCfgEntry 6 }
+
+aclGroupNewCfgRemoveBlock  OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The index of the ACL block entry to be removed from this ACL group.
+        A successful set operation on this object will unset the bit
+        corresponding to the ACL block entry in the aclGroupNewCfgMemberBlocks
+        bitmap. A value of zero is always returned when this object
+        is read."
+    ::= { aclGroupNewCfgEntry 7 }
+
+aclGroupNewCfgDelete  OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    other(1),
+                    delete(2)
+                }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "This is an action object to delete an ACL group.  A value of other(1)
+        is always returned when this object is read."
+    ::= { aclGroupNewCfgEntry 8 }
+
+
+-- ----------------------------------------------------------------------------
+-- } INSERT:  bt2acl
+-- ----------------------------------------------------------------------------
+
+END
+
+