Initial commitHEADmain

1 files changed, 524 insertions, 0 deletions

diff --git a/MIBS/fs/NSCRTV-EPON-QOS-MGM-MIB b/MIBS/fs/NSCRTV-EPON-QOS-MGM-MIB
new file mode 100644
index 0000000..c6369f7
--- /dev/null
+++ b/MIBS/fs/NSCRTV-EPON-QOS-MGM-MIB
@@ -0,0 +1,524 @@
+

+NSCRTV-EPON-QOS-MGM-MIB DEFINITIONS ::= BEGIN

+

+IMPORTS

+    MODULE-IDENTITY, OBJECT-TYPE, Counter32, Unsigned32, TimeTicks

+        FROM SNMPv2-SMI

+    DateAndTime, MacAddress, TimeStamp, RowStatus, TruthValue, DisplayString, TEXTUAL-CONVENTION

+        FROM SNMPv2-TC

+    EponDeviceIndex, EponCardIndex, EponPortIndex, EponAlarmCode, EponAlarmInstance, EponSeverityType,

+    AutoNegotiationTechAbility, TAddress, EponStats15MinRecordType, EponStats24HourRecordType, EponStatsThresholdType

+		FROM NSCRTV-EPONEOC-EPON-MIB

+    qosManagementObjects

+        FROM NSCRTV-EPONEOC-EPON-MIB;

+

+--------------------------------------------------------------------------------

+--  qosManagementObjects[ Qos管理项](1.3.6.1.4.1.17409.2.3.8)

+-------------------------------------------------------------------------------- 

+

+    qosGlobalSetTable OBJECT-TYPE

+      SYNTAX SEQUENCE OF QosGlobalSetEntry

+      MAX-ACCESS not-accessible

+      STATUS current

+      DESCRIPTION

+        "Global QoS parameters."

+      ::= { qosManagementObjects 1 }

+    

+    qosGlobalSetEntry OBJECT-TYPE

+      SYNTAX QosGlobalSetEntry

+      MAX-ACCESS not-accessible

+      STATUS current

+      DESCRIPTION

+        ""

+      INDEX { qosGlobalSetDeviceIndex }

+      ::= { qosGlobalSetTable 1 }    

+    QosGlobalSetEntry ::=

+      SEQUENCE { 

+        qosGlobalSetDeviceIndex

+          EponDeviceIndex,

+        qosGlobalSetMaxQueueCount

+          INTEGER,

+        qosGlobalSetMode

+          INTEGER

+       }

+

+    qosGlobalSetDeviceIndex OBJECT-TYPE

+      SYNTAX EponDeviceIndex

+      MAX-ACCESS not-accessible

+      STATUS current

+      DESCRIPTION

+        "

+        Device index        

+        For OLT - Set to corresponding device

+        For ONU - Set to 0

+        "

+      ::= { qosGlobalSetEntry 1 }

+    

+    qosGlobalSetMaxQueueCount OBJECT-TYPE

+      SYNTAX INTEGER (1..256)

+      MAX-ACCESS read-only

+      STATUS current

+      DESCRIPTION

+        "

+        最大队列数，该设备支持的最大队列数。如果最大队列数为8，则队列编号为0-7。"

+      ::= { qosGlobalSetEntry 2 }

+

+    qosGlobalSetMode OBJECT-TYPE

+      SYNTAX INTEGER 

+        {

+          deviceBased(1),

+          portBased(2)

+        }

+      MAX-ACCESS read-write

+      STATUS current

+      DESCRIPTION

+        "

+        Define how to set QoS parameter

+        deviceBased(1)  - When set, only the table started with deviceBase is applicable

+        portBased(2)  - When set, only the table started with portBase is applicable

+        "

+      DEFVAL { deviceBased }

+      ::= { qosGlobalSetEntry 3 }

+    

+    deviceBaseQosMapTable OBJECT-TYPE

+      SYNTAX SEQUENCE OF DeviceBaseQosMapEntry

+      MAX-ACCESS not-accessible

+      STATUS current

+      DESCRIPTION

+        "Deviced based setting.        

+        It is used to define how to map QoS options to queue"

+      ::= { qosManagementObjects 2 }

+    

+    deviceBaseQosMapEntry OBJECT-TYPE

+      SYNTAX DeviceBaseQosMapEntry

+      MAX-ACCESS not-accessible

+      STATUS current

+      DESCRIPTION

+        ""

+      INDEX { deviceBaseQosMapDeviceIndex, deviceBaseQosMapRuleIndex }

+      ::= { deviceBaseQosMapTable 1 }

+    

+    DeviceBaseQosMapEntry ::=

+      SEQUENCE { 

+        deviceBaseQosMapDeviceIndex

+          EponDeviceIndex,

+        deviceBaseQosMapRuleIndex

+          INTEGER,

+        deviceBaseQosMapOctet

+          OCTET STRING

+       }

+

+    deviceBaseQosMapDeviceIndex OBJECT-TYPE

+      SYNTAX EponDeviceIndex

+      MAX-ACCESS not-accessible

+      STATUS current

+      DESCRIPTION

+        "

+        Device index        

+        For OLT - Set to corresponding device/slot/port

+        For ONU - Set to 0

+        "

+      ::= { deviceBaseQosMapEntry 1 }

+    

+    deviceBaseQosMapRuleIndex OBJECT-TYPE

+      SYNTAX INTEGER

+        {

+        cos(1),

+        tos(2),

+        diffserv(3)

+        }

+      MAX-ACCESS not-accessible

+      STATUS current

+      DESCRIPTION

+        "

+        映射规则编号"

+      ::= { deviceBaseQosMapEntry 2 }

+    

+    deviceBaseQosMapOctet OBJECT-TYPE

+      SYNTAX OCTET STRING (SIZE (8 | 64))

+      MAX-ACCESS read-write

+      STATUS current

+      DESCRIPTION

+        "

+        映射值。

+        长度为8字节，或64字节。每字节表示一个映射关系。

+        队列编号不能超过对应的qosGlobalSetMaxQueueCount值，如果qosGlobalSetMaxQueueCount为8，则队列编号为0-7。        

+        对于 cos，长度为 8字节，每个字节分别表示cos0-7 映射到的队列编号。

+        对于 tos，长度为 16字节，每个字节分别表示tos0-15 映射到的队列编号。

+        对于 diffserv，长度为64字节，每个字节分别表示diffserv0-63映射到的队列编号。        

+        举例如下：

+        get 1.3.6.1.4.1.17409.2.3.8.3.1.3.deviceBaseQosMapDeviceIndex(410100101).cos(1) = hex(00 00 01 02 03 03 04 04)

+        则映射关系为：

+        cos 0 -> queue 0

+        cos 1 -> queue 0

+        cos 2 -> queue 1

+        cos 3 -> queue 2

+        cos 4 -> queue 3

+        cos 5 -> queue 3

+        cos 6 -> queue 4

+        cos 7 -> queue 4

+        "

+      ::= { deviceBaseQosMapEntry 3 }    

+    deviceBaseQosPolicyTable OBJECT-TYPE

+      SYNTAX SEQUENCE OF DeviceBaseQosPolicyEntry

+      MAX-ACCESS not-accessible

+      STATUS current

+      DESCRIPTION

+        "Deviced based setting

+        

+        It is used to define QoS specification"

+      ::= { qosManagementObjects 3 }

+    

+    deviceBaseQosPolicyEntry OBJECT-TYPE

+      SYNTAX DeviceBaseQosPolicyEntry

+      MAX-ACCESS not-accessible

+      STATUS current

+      DESCRIPTION

+        ""

+      INDEX { deviceBaseQosPolicyDeviceIndex }

+      ::= { deviceBaseQosPolicyTable 1 }

+    

+    DeviceBaseQosPolicyEntry ::=

+      SEQUENCE { 

+        deviceBaseQosPolicyDeviceIndex

+          EponDeviceIndex,

+        deviceBaseQosPolicyMode

+          INTEGER,

+        deviceBaseQosPolicyWeightOctet

+          OCTET STRING,

+        deviceBaseQosPolicySpBandwidthRange

+          OCTET STRING

+       }

+

+    deviceBaseQosPolicyDeviceIndex OBJECT-TYPE

+      SYNTAX EponDeviceIndex

+      MAX-ACCESS not-accessible

+      STATUS current

+      DESCRIPTION

+        "

+        Device index        

+        For OLT - Set to corresponding device/slot/port

+        For ONU - Set to 0

+        "

+      ::= { deviceBaseQosPolicyEntry 1 }

+    

+    deviceBaseQosPolicyMode OBJECT-TYPE

+      SYNTAX INTEGER

+        {

+        sp(1),

+        wrr(2),

+        spWrr(3),

+        wfp(4)

+        }

+      MAX-ACCESS read-write

+      STATUS current

+      DESCRIPTION

+        "

+        调度模式"

+      ::= { deviceBaseQosPolicyEntry 2 }

+    

+    deviceBaseQosPolicyWeightOctet OBJECT-TYPE

+      SYNTAX OCTET STRING

+      MAX-ACCESS read-write

+      STATUS current

+      DESCRIPTION

+        "

+        权重值。        

+        长度等于队列数目，每字节表示一个队列的权重。

+        对于 sp，读写该节点无意义，读时始终为全0。

+        对于 wrr，每字节描述一个队列的权重。权重的范围为1-100，全部队列权重之和应等于100。

+        对于 spWrr，每字节描述一个队列的权重。权重范围为0-100，权重为0表示该队列用sp模式，权重值非0的队列权重之和应等于100。

+        对于 wfp，读写该节点无意义，读时始终为全0。        

+        举例如下：

+        get 1.3.6.1.4.1.17409.2.3.8.4.1.2.deviceBaseQosPolicyDeviceIndex(410100101). = wrr(2)

+        get 1.3.6.1.4.1.17409.2.3.8.4.1.3.deviceBaseQosPolicyDeviceIndex(410100101). = hex(5 5 5 5 10 20 20 30)

+        

+        说明：共8个队列

+        queue 0 权重为 5

+        queue 1 权重为 5

+        queue 2 权重为 5

+        queue 3 权重为 5

+        queue 4 权重为 10

+        queue 5 权重为 20

+        queue 6 权重为 20

+        queue 7 权重为 30

+        

+        "

+      ::= { deviceBaseQosPolicyEntry 3 }

+    

+    deviceBaseQosPolicySpBandwidthRange OBJECT-TYPE

+      SYNTAX OCTET STRING

+      MAX-ACCESS read-write

+      STATUS current

+      DESCRIPTION

+        "

+        Define SP assured bandwidth for each queue.        

+        The size of this object is 4*(number of queue). For each queue, use 4 octets 

+        to represend the assured bandwidth for the queue. The four-octet could be mapped

+        to an unsigned integer, in units of kbps. The sequence of the map is from queue 

+        0 to queue max (for example, 7).        

+        For example, 00 00 00 10  00 00 01 00  00 00 00 00  00 00 00 00

+                     00 00 10 00  00 00 00 01  00 01 01 00  00 00 11 11                     

+        It means, 8 queues and the assured bandwidth for each queue as:        

+        queue 0  16kbps

+        queue 1  256kbps

+        queue 2  0 

+        queue 3  0

+        queue 4  4096kbps

+        queue 5  1kbps

+        queue 6  65792kbps

+        queue 7  65535kbps

+        "

+      ::= { deviceBaseQosPolicyEntry 4 }

+    

+    portBaseQosMapTable OBJECT-TYPE

+      SYNTAX SEQUENCE OF PortBaseQosMapEntry

+      MAX-ACCESS not-accessible

+      STATUS current

+      DESCRIPTION

+        ""

+      ::= { qosManagementObjects 4 }

+    

+    portBaseQosMapEntry OBJECT-TYPE

+      SYNTAX PortBaseQosMapEntry

+      MAX-ACCESS not-accessible

+      STATUS current

+      DESCRIPTION

+        ""

+      INDEX { deviceBaseQosMapDeviceIndex, portBaseQosMapCardIndex, portBaseQosMapPortIndex, deviceBaseQosMapRuleIndex }

+      ::= { portBaseQosMapTable 1 }

+    

+    PortBaseQosMapEntry ::=

+      SEQUENCE { 

+        portBaseQosMapDeviceIndex

+          EponDeviceIndex,

+        portBaseQosMapCardIndex

+          EponPortIndex,

+        portBaseQosMapPortIndex

+          EponPortIndex,

+        portBaseQosMapRuleIndex

+          INTEGER,

+        portBaseQosMapOctet

+          OCTET STRING

+       }

+

+    portBaseQosMapDeviceIndex OBJECT-TYPE

+      SYNTAX EponDeviceIndex

+      MAX-ACCESS not-accessible

+      STATUS current

+      DESCRIPTION

+        "

+        Device index        

+        For OLT, set to corresponding SNI port or PON port

+        For ONU, set to 0

+        "

+      ::= { portBaseQosMapEntry 1 }

+    

+    portBaseQosMapCardIndex OBJECT-TYPE

+      SYNTAX EponPortIndex

+      MAX-ACCESS not-accessible

+      STATUS current

+      DESCRIPTION

+        "

+        板卡索引号        

+        For OLT, set to 0

+        For ONU, set to corresponding slot

+        "

+      ::= { portBaseQosMapEntry 2 }

+    

+    portBaseQosMapPortIndex OBJECT-TYPE

+      SYNTAX EponPortIndex

+      MAX-ACCESS not-accessible

+      STATUS current

+      DESCRIPTION

+        "

+        端口索引        

+        For OLT, set to 0

+        For ONU, set to corresponding port

+        "

+      ::= { portBaseQosMapEntry 3 }

+    

+    portBaseQosMapRuleIndex OBJECT-TYPE

+      SYNTAX INTEGER

+        {

+        cos(1),

+        tos(2),

+        diffserv(3)

+        }

+      MAX-ACCESS not-accessible

+      STATUS current

+      DESCRIPTION

+        "

+        映射规则编号"

+      ::= { portBaseQosMapEntry 4 }

+    

+    portBaseQosMapOctet OBJECT-TYPE

+      SYNTAX OCTET STRING (SIZE (8..64))

+      MAX-ACCESS read-write

+      STATUS current

+      DESCRIPTION

+        "

+        映射值。

+        长度为8字节，或64字节。每字节表示一个映射关系。

+        队列编号不能超过对应的qosGlobalSetMaxQueueCount值，如果qosGlobalSetMaxQueueCount为8，则队列编号为0-7。        

+        对于 cos，长度为 8字节，每个字节分别表示cos0-7 映射到的队列编号。

+        对于 tos，长度为 16字节，每个字节分别表示tos0-16 映射到的队列编号。

+        对于 diffserv，长度为64字节，每个字节分别表示diffserv0-64映射到的队列编号。        

+        举例如下：

+        get 1.3.6.1.4.1.17409.2.3.8.3.1.3.deviceBaseQosMapDeviceIndex(410100101).cos(1) = hex(00 00 01 02 03 03 04 04)

+        则映射关系为：

+        cos 0 -> queue 0

+        cos 1 -> queue 0

+        cos 2 -> queue 1

+        cos 3 -> queue 2

+        cos 4 -> queue 3

+        cos 5 -> queue 3

+        cos 6 -> queue 4

+        cos 7 -> queue 4

+        "

+      ::= { portBaseQosMapEntry 5 }

+    

+    portBaseQosPolicyTable OBJECT-TYPE

+      SYNTAX SEQUENCE OF PortBaseQosPolicyEntry

+      MAX-ACCESS not-accessible

+      STATUS current

+      DESCRIPTION

+        "Description."

+      ::= { qosManagementObjects 5 }

+    

+    portBaseQosPolicyEntry OBJECT-TYPE

+      SYNTAX PortBaseQosPolicyEntry

+      MAX-ACCESS not-accessible

+      STATUS current

+      DESCRIPTION

+        ""

+      INDEX { deviceBaseQosPolicyDeviceIndex, portBaseQosPolicyCardIndex, portBaseQosPolicyPortIndex }

+      ::= { portBaseQosPolicyTable 1 }

+    

+    PortBaseQosPolicyEntry ::=

+      SEQUENCE { 

+        portBaseQosPolicyDeviceIndex

+          EponDeviceIndex,

+        portBaseQosPolicyCardIndex

+          EponPortIndex,

+        portBaseQosPolicyPortIndex

+          EponPortIndex,

+        portBaseQosPolicyMode

+          INTEGER,

+        portBaseQosPolicyWeightOctet

+          OCTET STRING,

+        portBaseQosPolicySpBandwidthRange

+          OCTET STRING

+       }

+    portBaseQosPolicyDeviceIndex OBJECT-TYPE

+      SYNTAX EponDeviceIndex

+      MAX-ACCESS not-accessible

+      STATUS current

+      DESCRIPTION

+        "

+        Device index

+        For OLT, set to corresponding SNI port or PON port

+        For ONU, set to 0

+        "

+      ::= { portBaseQosPolicyEntry 1 }

+    

+    portBaseQosPolicyCardIndex OBJECT-TYPE

+      SYNTAX EponPortIndex

+      MAX-ACCESS not-accessible

+      STATUS current

+      DESCRIPTION

+        "

+        板卡索引号        

+        For OLT, set to 0

+        For ONU, set to corresponding slot

+        "

+      ::= { portBaseQosPolicyEntry 2 }

+    

+    portBaseQosPolicyPortIndex OBJECT-TYPE

+      SYNTAX EponPortIndex

+      MAX-ACCESS not-accessible

+      STATUS current

+      DESCRIPTION

+        "

+        端口索引        

+        For OLT, set to 0

+        For ONU, set to corresponding port

+        "

+      ::= { portBaseQosPolicyEntry 3 }

+    

+    portBaseQosPolicyMode OBJECT-TYPE

+      SYNTAX INTEGER

+        {

+        sp(1),

+        wrr(2),

+        spWrr(3),

+        wfp(4)

+        }

+      MAX-ACCESS read-write

+      STATUS current

+      DESCRIPTION

+        "

+        调度模式        

+        sp 严格优先级

+        wrr 加权轮循

+        spWrr sp+wrr混合

+        wfp 加权公平排队"

+      ::= { portBaseQosPolicyEntry 4 }

+    

+    portBaseQosPolicyWeightOctet OBJECT-TYPE

+      SYNTAX OCTET STRING (SIZE (1..256))

+      MAX-ACCESS read-write

+      STATUS current

+      DESCRIPTION

+        "

+        权重值        

+        长度等于队列数目，每字节表示一个队列的权重。        

+        对于 sp，读写该节点无意义，读时始终为全0。

+        对于 wrr，每字节描述一个队列的权重。权重的范围为1-100，全部队列权重之和应等于100。

+        对于 spWrr，每字节描述一个队列的权重。权重范围为0-100，权重为0表示该队列用sp模式，权重值非0的队列权重之和应等于100。

+        对于 wfp，读写该节点无意义，读时始终为全0。        

+        举例如下：

+        get 1.3.6.1.4.1.17409.2.3.8.4.1.2.deviceBaseQosPolicyDeviceIndex(410100101). = wrr(2)

+        get 1.3.6.1.4.1.17409.2.3.8.4.1.3.deviceBaseQosPolicyDeviceIndex(410100101). = hex(5 5 5 5 10 20 20 30)        

+        说明：共8个队列

+        queue 0 权重为 5

+        queue 1 权重为 5

+        queue 2 权重为 5

+        queue 3 权重为 5

+        queue 4 权重为 10

+        queue 5 权重为 20

+        queue 6 权重为 20

+        queue 7 权重为 30        

+        "

+      ::= { portBaseQosPolicyEntry 5 }

+    

+    portBaseQosPolicySpBandwidthRange OBJECT-TYPE

+      SYNTAX OCTET STRING

+      MAX-ACCESS read-write

+      STATUS current

+      DESCRIPTION

+        "     

+        Define SP assured bandwidth for each queue.        

+        The size of this object is 4*(number of queue). For each queue, use 4 octets 

+        to represend the assured bandwidth for the queue. The four-octet could be mapped

+        to an unsigned integer, in units of kbps. The sequence of the map is from queue 

+        0 to queue max (for example, 7).        

+        For example, 00 00 00 10  00 00 01 00  00 00 00 00  00 00 00 00

+                     00 00 10 00  00 00 00 01  00 01 01 00  00 00 11 11                     

+        It means, 8 queues and the assured bandwidth for each queue as:        

+        queue 0  16kbps

+        queue 1  256kbps

+        queue 2  0 

+        queue 3  0

+        queue 4  4096kbps

+        queue 5  1kbps

+        queue 6  65792kbps

+        queue 7  65535kbps

+        "

+      ::= { portBaseQosPolicyEntry 6 }

+

+--

+-- END of NSCRTV-EPON-QOS-MGM-MIB

+--

+

+END