diff options
| author | David Leutgeb <david.leutgeb@mannundmouse.com> | 2023-12-05 12:25:34 +0100 |
|---|---|---|
| committer | David Leutgeb <david.leutgeb@mannundmouse.com> | 2023-12-05 12:25:34 +0100 |
| commit | 98a672123c7872f6b9b75a9a2b6bb3aea504de6a (patch) | |
| tree | 9b13bd7f563c3198047bd359195327cf28b3caf0 /MIBS/dlink/DLINKSW-SFLOW-MIB | |
| download | mibs-98a672123c7872f6b9b75a9a2b6bb3aea504de6a.tar.gz mibs-98a672123c7872f6b9b75a9a2b6bb3aea504de6a.zip | |
Diffstat (limited to 'MIBS/dlink/DLINKSW-SFLOW-MIB')
| -rw-r--r-- | MIBS/dlink/DLINKSW-SFLOW-MIB | 612 |
1 files changed, 612 insertions, 0 deletions
diff --git a/MIBS/dlink/DLINKSW-SFLOW-MIB b/MIBS/dlink/DLINKSW-SFLOW-MIB new file mode 100644 index 0000000..41d89f0 --- /dev/null +++ b/MIBS/dlink/DLINKSW-SFLOW-MIB @@ -0,0 +1,612 @@ +-- *****************************************************************
+-- DLINKSW-SFLOW-MIB.mib : D-Link sFlow MIB
+--
+-- Copyright (c) 2013 D-Link Corporation, all rights reserved.
+--
+-- *****************************************************************
+DLINKSW-SFLOW-MIB DEFINITIONS ::= BEGIN
+
+ IMPORTS
+ MODULE-IDENTITY, OBJECT-TYPE, Integer32
+ FROM SNMPv2-SMI
+ TEXTUAL-CONVENTION, RowStatus,DisplayString
+ FROM SNMPv2-TC
+ MODULE-COMPLIANCE, OBJECT-GROUP
+ FROM SNMPv2-CONF
+ SnmpAdminString
+ FROM SNMP-FRAMEWORK-MIB
+
+ InetAddressType, InetAddress, InetAddressIPv4, InetAddressIPv6
+ FROM INET-ADDRESS-MIB
+ dlinkIndustrialCommon
+ FROM DLINK-ID-REC-MIB;
+
+ dlinkSwSFlowMIB MODULE-IDENTITY
+ LAST-UPDATED "201304100000Z"
+ ORGANIZATION "D-Link Corp."
+ CONTACT-INFO
+ " D-Link Corporation
+
+ Postal: No. 289, Sinhu 3rd Rd., Neihu District,
+ Taipei City 114, Taiwan, R.O.C
+ Tel: +886-2-66000123
+ E-mail: tsd@dlink.com.tw
+ "
+ DESCRIPTION
+ "The structure of sFlow for the proprietary enterprise."
+
+ REVISION "201304100000Z"
+ DESCRIPTION
+ "Initial version of this MIB module."
+ ::= { dlinkIndustrialCommon 36 }
+
+-- -----------------------------------------------------------------------------
+
+ dSFlowMIBNotifications OBJECT IDENTIFIER ::= { dlinkSwSFlowMIB 0 }
+ dSFlowMIBObjects OBJECT IDENTIFIER ::= { dlinkSwSFlowMIB 1 }
+ dSFlowMIBConformance OBJECT IDENTIFIER ::= { dlinkSwSFlowMIB 2 }
+
+-- -----------------------------------------------------------------------------
+ DSFlowDataSource ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "Identifies the ifIndex of interface as the source of sFlow data.
+
+ DSFlowDataSources of this traditional form are called
+ 'port-based'. Ideally the sampling entity will perform
+ sampling on all flows originating from or destined to
+ the specified interface. However, if the switch architecture
+ only allows input or output sampling then the sampling agent
+ is permitted to only sample input flows input or output flows.
+ Each packet must only be considered once for sampling,
+ irrespective of the number of ports it will be forwarded to.
+
+ Note: Since each DSFlowDataSource operates independently a
+ packet that crosses multiple DataSources may generate
+ multiple flow records."
+ SYNTAX Integer32 (1..2147483647)
+
+ DSFlowInstance ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "If more than one sFlow sampler is available for this
+ DSFlowDataSource then individual samplers are distinguished
+ using the DSFlowInstance variable. The value of
+ DSFlowInstance ranges from 1..n where n is the number of
+ samplers associated with this DSFlowDataSource.
+
+ Note: Each sFlow sampler instance must operate
+ independently of all other instances. Setting
+ an attribute of one sampler must not alter the
+ the behavior and settings of other sampler
+ instances."
+ SYNTAX Integer32 (1..65535)
+
+ DSFlowReceiver ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "Identify the sFlow receiver associated with this resource.
+
+ A value of zero indicates that this resource is available.
+ If non-zero the value must correspond to a valid, active
+ dSFlowRcvrIndex.
+
+ If the value is currently zero it may be set to any
+ active entry in the dSFlowRcvrTable. If the value is
+ not zero then a set to anything other than zero or
+ its current value will result in an SNMP error (bad value).
+
+ Setting to zero frees the resource and returns all the
+ values in this entry to their default values.
+
+ If an entry in the dSFlowRcvrTable expires, either
+ because the dSFlowRcvrOwner is set to the empty
+ string or because the dSFlowRcvrCurrentTimeout reaches zero, then
+ the agent must mark all associated resources as available
+ (by setting the associated DSFlowReceiver entry to zero)
+ and all values in these records must be restored to their
+ default values.
+
+ This mechanism provides no enforcement and relies on the
+ cooperation of management entities in order to ensure that
+ competition for a resource is fairly resolved. A management
+ entity should not make any changes to a resource
+ without first acquiring it by successfully writing its
+ dSFlowRcvrIndex value as the DSFlowReceiver for the resource."
+ SYNTAX Integer32
+
+-- -----------------------------------------------------------------------------
+ dSFlowVersion OBJECT-TYPE
+ SYNTAX SnmpAdminString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Uniquely identifies the version and implementation of this MIB.
+ The version string must have the following structure:
+ <MIB Version>;<Organization>;<Software Revision>
+ where:
+ <MIB Version> must be '1.3', the version of referred SFLOW-MIB,
+ which is defined by sFlow.org.
+ <Organization> the name of the organization responsible
+ for the agent implementation.
+ <Revision> the specific software build of this agent.
+
+ As an example, the string '1.3;InMon Corp.;2.1.1' indicates
+ that this agent implements version '1.2' of the SFLOW MIB, that
+ it was developed by 'InMon Corp.' and that the software build
+ is '2.1.1'.
+
+ The MIB Version will change with each revision of the SFLOW-MIB.
+
+ Management entities must check the MIB Version and not attempt
+ to manage agents with MIB Versions greater than that for which
+ they were designed.
+
+ Note: The sFlow Datagram Format has an independent version
+ number which may change independently from <MIB Version>.
+ <MIB Version> applies to the structure and semantics of
+ the SFLOW MIB only."
+ DEFVAL { "1.3;;" }
+ ::= { dSFlowMIBObjects 1 }
+
+ dSFlowAgentAddressIPv4 OBJECT-TYPE
+ SYNTAX InetAddressIPv4
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The IPv4 address associated with this agent."
+ ::= { dSFlowMIBObjects 2 }
+
+ dSFlowAgentAddressIPv6 OBJECT-TYPE
+ SYNTAX InetAddressIPv6
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The IPv6 address associated with this agent. If the IPv6
+ is not supported on this agent, 0::0 will be displayed."
+ ::= { dSFlowMIBObjects 3 }
+
+-- -----------------------------------------------------------------------------
+-- Receiver Table
+-- -----------------------------------------------------------------------------
+ dSFlowRcvrTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF DSFlowRcvrEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table of the receivers of sFlow information."
+ ::= { dSFlowMIBObjects 4 }
+
+ dSFlowRcvrEntry OBJECT-TYPE
+ SYNTAX DSFlowRcvrEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Attributes of an sFlow Receiver."
+ INDEX { dSFlowRcvrIndex }
+ ::= { dSFlowRcvrTable 1 }
+
+ DSFlowRcvrEntry ::= SEQUENCE {
+ dSFlowRcvrIndex Integer32,
+ dSFlowRcvrOwner DisplayString,
+ dSFlowRcvrAdminTimeout Integer32,
+ dSFlowRcvrCurrentTimeout Integer32,
+ dSFlowRcvrMaximumDatagramSize Integer32,
+ dSFlowRcvrAddressType InetAddressType,
+ dSFlowRcvrAddress InetAddress,
+ dSFlowRcvrVrfName DisplayString,
+ dSFlowRcvrPort Integer32,
+ dSFlowRcvrDatagramVersion Integer32,
+ dSFlowRcvrReset INTEGER
+ }
+
+ dSFlowRcvrIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Index into dSFlowReceiverTable. The number of supported receivers
+ is project dependent."
+ ::= { dSFlowRcvrEntry 1 }
+
+ dSFlowRcvrOwner OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..32))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The entity making use of this dSFlowRcvrTable entry. The
+ empty string indicates that the entry is currently unclaimed.
+ An entity wishing to claim a dSFlowRcvrTable entry must
+ ensure that the entry is unclaimed before trying to claim it.
+ The entry is claimed by setting the owner string. The entry
+ must be claimed before any changes can be made to the receiver's
+ other objects.
+
+ When a management entity is finished using the receiver, it
+ should set the value of dSFlowRcvrOwner back to unclaimed.
+ The agent must restore all other entities this row to their
+ default values when the owner is set to unclaimed. It must
+ also free all other resources associated with this
+ dSFlowRcvrTable entry.
+
+ This mechanism provides no enforcement and relies on the
+ cooperation of management entities in order to ensure that
+ competition for a receiver entry is fairly resolved."
+ DEFVAL { "" }
+ ::= { dSFlowRcvrEntry 2 }
+
+ dSFlowRcvrAdminTimeout OBJECT-TYPE
+ SYNTAX Integer32 (0..2000000)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The expire time (in seconds) configured for the receiver.
+
+ A management entity wanting to maintain control of the receiver
+ is responsible for setting a new value before the old one
+ expires.
+
+ When the interval expires, the agent is responsible for
+ restoring all other entities in this row to their default
+ values. It must also free all other resources associated with
+ this dSFlowRcvrTable entry.
+
+ When set, 0 means infinite that the receiver will never be
+ expired."
+ DEFVAL { 0 }
+ ::= { dSFlowRcvrEntry 3 }
+
+ dSFlowRcvrCurrentTimeout OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The time (in seconds) remaining before the receiver is released."
+ DEFVAL { 0 }
+ ::= { dSFlowRcvrEntry 4 }
+
+ dSFlowRcvrMaximumDatagramSize OBJECT-TYPE
+ SYNTAX Integer32 (700..1400)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The maximum number of data bytes that can be sent in a single
+ sample datagram. The manager should set this value to avoid
+ fragmentation of the sFlow datagrams."
+ DEFVAL { 1400 }
+ ::= { dSFlowRcvrEntry 5 }
+
+ dSFlowRcvrAddressType OBJECT-TYPE
+ SYNTAX InetAddressType
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The address type of the sFlow collector."
+ DEFVAL { ipv4 }
+ ::= { dSFlowRcvrEntry 6 }
+
+ dSFlowRcvrAddress OBJECT-TYPE
+ SYNTAX InetAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The IP address of the sFlow collector.
+ If set to 0.0.0.0 no sFlow datagrams will be sent."
+ DEFVAL { '00000000'h } -- 0.0.0.0
+ ::= { dSFlowRcvrEntry 7 }
+
+ dSFlowRcvrVrfName OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Specify the name of the routing forwarding instance."
+ DEFVAL { "" }
+ ::= { dSFlowRcvrEntry 8 }
+
+ dSFlowRcvrPort OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The UDP port of the remote sFlow collector."
+ DEFVAL { 6343 }
+ ::= { dSFlowRcvrEntry 9 }
+
+ dSFlowRcvrDatagramVersion OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The version of sFlow datagrams that should be sent."
+ DEFVAL { 5 }
+ ::= { dSFlowRcvrEntry 10 }
+
+ dSFlowRcvrReset OBJECT-TYPE
+ SYNTAX INTEGER {
+ reset(1),
+ noOp(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object reset the receiver when set to 'reset'.
+ No action is taken if this object is set to 'noOp'.
+ When read, the value 'noOp' is returned."
+ DEFVAL { noOp }
+ ::= { dSFlowRcvrEntry 11 }
+
+-- -----------------------------------------------------------------------------
+-- Flow Sampling Table
+-- -----------------------------------------------------------------------------
+ dSFlowFsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF DSFlowFsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table of the flow samplers within a device."
+ ::= { dSFlowMIBObjects 5 }
+
+ dSFlowFsEntry OBJECT-TYPE
+ SYNTAX DSFlowFsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Attributes of a flow sampler."
+ INDEX {
+ dSFlowFsDataSource,
+ dSFlowFsInstance
+ }
+ ::= { dSFlowFsTable 1 }
+
+ DSFlowFsEntry ::= SEQUENCE {
+ dSFlowFsDataSource DSFlowDataSource,
+ dSFlowFsInstance DSFlowInstance,
+ dSFlowFsReceiver DSFlowReceiver,
+ dSFlowFsDirection INTEGER,
+ dSFlowFsAdminSamplingRate Integer32,
+ dSFlowFsActiveSamplingRate Integer32,
+ dSFlowFsMaximumHeaderSize Integer32,
+ dSFlowFsRowStatus RowStatus
+ }
+
+ dSFlowFsDataSource OBJECT-TYPE
+ SYNTAX DSFlowDataSource
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This object indicates the source of the data for this flow
+ sampler."
+ ::= { dSFlowFsEntry 1 }
+
+ dSFlowFsInstance OBJECT-TYPE
+ SYNTAX DSFlowInstance
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The instance index for uniquely identifying the flow sampler
+ when multiple flow samplers are associated with one interface."
+ ::= { dSFlowFsEntry 2 }
+
+ dSFlowFsReceiver OBJECT-TYPE
+ SYNTAX DSFlowReceiver
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The index of the sFlow receiver for this flow sampler."
+ DEFVAL { 0 }
+ ::= { dSFlowFsEntry 3 }
+
+ dSFlowFsDirection OBJECT-TYPE
+ SYNTAX INTEGER{
+ inbound(1),
+ outbound(2)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object indicates the flow direction which will be sampled.
+ 'inbound' - sample ingress packets.
+ 'outbound' - sample egress packets."
+ DEFVAL { inbound }
+ ::= { dSFlowFsEntry 4 }
+
+ dSFlowFsAdminSamplingRate OBJECT-TYPE
+ SYNTAX Integer32 (0..65536)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The configured sampling rate for packet sampling from this
+ source.
+
+ Set to N to sample 1/Nth of the packets in the monitored flows.
+ An agent should choose its own algorithm to introduce variance
+ into the sampling so that exactly every Nth packet is not
+ counted. A sampling rate of 1 counts all packets. A sampling
+ rate of 0 disables sampling.
+
+ The agent is permitted to have minimum and maximum allowable
+ values for the sampling rate. A minimum rate lets the agent
+ designer set an upper bound on the overhead associated with
+ sampling, and a maximum rate may be the result of hardware
+ restrictions (such as counter size). In addition not all values
+ between the maximum and minimum may be realizable as the
+ sampling rate (again because of implementation considerations).
+
+ When the sampling rate is set the agent is free to adjust the
+ value so that it lies between the maximum and minimum values
+ and has the closest achievable value.
+
+ When read, the configured sampling rate will be returned."
+ DEFVAL { 0 }
+ ::= { dSFlowFsEntry 5 }
+
+ dSFlowFsActiveSamplingRate OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The statistical sampling rate for packet sampling from this
+ source.
+
+ When read, the agent must return the actual sampling rate it
+ will be using (after the adjustments previously described). The
+ sampling algorithm must converge so that over time the number
+ of packets sampled approaches 1/Nth of the total number of
+ packets in the monitored flows."
+ DEFVAL { 0 }
+ ::= { dSFlowFsEntry 6 }
+
+ dSFlowFsMaximumHeaderSize OBJECT-TYPE
+ SYNTAX Integer32 (18..256)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The maximum number of bytes that should be copied from a
+ sampled packet. The agent may have an internal maximum and
+ minimum permissible sizes. If an attempt is made to set this
+ value outside the permissible range then the agent should
+ adjust the value to the closest permissible value."
+ DEFVAL { 128 }
+ ::= { dSFlowFsEntry 7 }
+
+ dSFlowFsRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object indicates the status of this entry."
+ ::= { dSFlowFsEntry 8 }
+
+-- -----------------------------------------------------------------------------
+-- Counter Polling Table
+-- -----------------------------------------------------------------------------
+ dSFlowCpTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF DSFlowCpEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table of the counter pollers within a device."
+ ::= { dSFlowMIBObjects 6 }
+
+ dSFlowCpEntry OBJECT-TYPE
+ SYNTAX DSFlowCpEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Attributes of a counter poller."
+ INDEX {
+ dSFlowCpDataSource,
+ dSFlowCpInstance
+ }
+ ::= { dSFlowCpTable 1 }
+
+ DSFlowCpEntry ::= SEQUENCE {
+ dSFlowCpDataSource DSFlowDataSource,
+ dSFlowCpInstance DSFlowInstance,
+ dSFlowCpReceiver DSFlowReceiver,
+ dSFlowCpInterval Integer32,
+ dSFlowCpRowStatus RowStatus
+ }
+
+ dSFlowCpDataSource OBJECT-TYPE
+ SYNTAX DSFlowDataSource
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Identifies the source of the data for the counter poller."
+ ::= { dSFlowCpEntry 1 }
+
+ dSFlowCpInstance OBJECT-TYPE
+ SYNTAX DSFlowInstance
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The instance instance index for uniquely identifying the counter
+ poller when multiple Pollers are associated with one interface."
+ ::= { dSFlowCpEntry 2 }
+
+ dSFlowCpReceiver OBJECT-TYPE
+ SYNTAX DSFlowReceiver
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The sflow receiver's index for this counter poller."
+ DEFVAL { 0 }
+ ::= { dSFlowCpEntry 3 }
+
+ dSFlowCpInterval OBJECT-TYPE
+ SYNTAX Integer32 (0..120)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The maximum number of seconds between successive samples of the
+ counters associated with this data source. A sampling interval
+ of 0 disables counter sampling.
+
+ The agent is permitted to have minimum and maximum allowable
+ values for the counter polling interval. A minimum interval
+ lets the agent designer set an upper bound on the overhead
+ associated with polling, and a maximum interval may be the
+ result of implementation restrictions (such as counter size).
+ In addition not all values between the maximum and minimum may
+ be realizable as the sampling interval (again because of
+ implementation considerations)."
+ DEFVAL { 0 }
+ ::= { dSFlowCpEntry 4 }
+
+ dSFlowCpRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object indicates the status of this entry."
+ ::= { dSFlowCpEntry 5 }
+
+-- -----------------------------------------------------------------------------
+-- MIB Conformance statements
+-- -----------------------------------------------------------------------------
+ dSFlowMIBCompliances OBJECT IDENTIFIER ::= { dSFlowMIBConformance 1 }
+ dSFlowMIBGroups OBJECT IDENTIFIER ::= { dSFlowMIBConformance 2 }
+
+ dSFlowCompliance MODULE-COMPLIANCE
+ STATUS current
+ DESCRIPTION
+ "The compliance statement for entities which implement the
+ DLINKSW-SFLOW-MIB."
+
+ MODULE -- this module
+ MANDATORY-GROUPS { dSFlowAgentGroup }
+
+ OBJECT dSFlowRcvrAddressType
+ DESCRIPTION
+ "It is compliant to support only a subset of values. For example if
+ the platform doesn't support IPv6, the type of 'ipv6' cannot be
+ configured."
+
+ OBJECT dSFlowRcvrVrfName
+ DESCRIPTION
+ "When the agent doesn't support VRF, only zero string can be set."
+
+ ::= { dSFlowMIBCompliances 1 }
+
+ dSFlowAgentGroup OBJECT-GROUP
+ OBJECTS {
+ dSFlowVersion, dSFlowAgentAddressIPv4, dSFlowAgentAddressIPv6,
+ dSFlowRcvrOwner,dSFlowRcvrAdminTimeout,dSFlowRcvrCurrentTimeout,
+ dSFlowRcvrMaximumDatagramSize, dSFlowRcvrAddressType,
+ dSFlowRcvrAddress, dSFlowRcvrPort, dSFlowRcvrVrfName,
+ dSFlowRcvrDatagramVersion, dSFlowRcvrReset,
+ dSFlowFsReceiver, dSFlowFsDirection,
+ dSFlowFsAdminSamplingRate, dSFlowFsActiveSamplingRate,
+ dSFlowFsMaximumHeaderSize, dSFlowFsRowStatus,
+ dSFlowCpReceiver, dSFlowCpInterval, dSFlowCpRowStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects for managing the generation and
+ transportation of sFlow data records."
+ ::= { dSFlowMIBGroups 1 }
+
+END
+
|