diff options
| author | David Leutgeb <david.leutgeb@mannundmouse.com> | 2023-12-05 12:25:34 +0100 |
|---|---|---|
| committer | David Leutgeb <david.leutgeb@mannundmouse.com> | 2023-12-05 12:25:34 +0100 |
| commit | 98a672123c7872f6b9b75a9a2b6bb3aea504de6a (patch) | |
| tree | 9b13bd7f563c3198047bd359195327cf28b3caf0 /MIBS/dataaire | |
| download | mibs-98a672123c7872f6b9b75a9a2b6bb3aea504de6a.tar.gz mibs-98a672123c7872f6b9b75a9a2b6bb3aea504de6a.zip | |
Diffstat (limited to 'MIBS/dataaire')
| -rw-r--r-- | MIBS/dataaire/DataAire-dap4-al-MIB | 1977 |
1 files changed, 1977 insertions, 0 deletions
diff --git a/MIBS/dataaire/DataAire-dap4-al-MIB b/MIBS/dataaire/DataAire-dap4-al-MIB new file mode 100644 index 0000000..c297954 --- /dev/null +++ b/MIBS/dataaire/DataAire-dap4-al-MIB @@ -0,0 +1,1977 @@ +-- +-- Data Aire-dap4_al.MIB +-- MIB generated by Data Aire +-- Tuesday, 12 July 2011 +-- + + DataAire-dap4-al-MIB DEFINITIONS ::= BEGIN + + IMPORTS + OBJECT-GROUP + FROM SNMPv2-CONF + sysContact, sysName, sysLocation + FROM SNMPv2-MIB + enterprises, MODULE-IDENTITY, OBJECT-TYPE, Integer32 + FROM SNMPv2-SMI; + + dap4-alMIB MODULE-IDENTITY + LAST-UPDATED "201107120850Z" -- July 12, 2011 at 08:50 GMT + ORGANIZATION "Data Aire" + CONTACT-INFO + " + Data Aire + 230 West Blueridge Ave + Orange, CA + Tel: 1-800-347-2473 + E-mail: sales@dataaire.com + " + DESCRIPTION + "This is the MIB module for the dap4_al device." + REVISION "201107120850Z" + DESCRIPTION + "version 1.0" + ::= { instruments 1 } + + +-- +-- Node definitions +-- + + -- 1.3.6.1.4.1.9839 + carel OBJECT IDENTIFIER ::= { enterprises 9839 } + + -- 1.3.6.1.4.1.9839.1 + systm OBJECT IDENTIFIER ::= { carel 1 } + + -- 1.3.6.1.4.1.9839.1.1 + agentRelease OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Release of the Agent." + ::= { systm 1 } + + -- 1.3.6.1.4.1.9839.1.2 + agentCode OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Code of the Agent. 2=pCOWeb." + ::= { systm 2 } + + -- 1.3.6.1.4.1.9839.2 + instruments OBJECT IDENTIFIER ::= { carel 2 } + + -- 1.3.6.1.4.1.9839.2.0 + pCOWebInfo OBJECT IDENTIFIER ::= { instruments 0 } + + + -- 1.3.6.1.4.1.9839.2.0.10 + pCOStatusgroup OBJECT IDENTIFIER ::= { pCOWebInfo 10 } + + -- 1.3.6.1.4.1.9839.2.0.10.1 + pCOId1-Status OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Status of pCOId1. 0=Offline, 1=Init, 2=Online" + ::= { pCOStatusgroup 1 } + + -- ... You will have how many pCOIdX-Status objects as the pCOs connected to pCOWeb. + + -- 1.3.6.1.4.1.9839.2.0.11 + pCOErrorsNumbergroup OBJECT IDENTIFIER ::= { pCOWebInfo 11 } + + -- 1.3.6.1.4.1.9839.2.0.11.1 + pCOId1-ErrorsNumber OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Number of Communication Errors from pCOId1 to pCOWeb." + ::= { pCOErrorsNumbergroup 1 } + + -- ... You will have how many pCOIdX-ErrorsNumber objects as the pCOs connected to pCOWeb. + + -- 1.3.6.1.4.1.9839.2.1.1 + digitalObjects OBJECT IDENTIFIER ::= { dap4-alMIB 1 } + + -- 1.3.6.1.4.1.9839.2.1.1.1 + dehum-on OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Dehumidify mode is running" + DEFVAL { 0 } + ::= { digitalObjects 1 } + + -- 1.3.6.1.4.1.9839.2.1.1.2 + hum-on OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Humidifier is running" + DEFVAL { 0 } + ::= { digitalObjects 2 } + + -- 1.3.6.1.4.1.9839.2.1.1.3 + engy-on OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Energy saver is running" + DEFVAL { 0 } + ::= { digitalObjects 3 } + + -- 1.3.6.1.4.1.9839.2.1.1.4 + cool-inhibit OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Cooling inhibit from Zone Master" + DEFVAL { 0 } + ::= { digitalObjects 4 } + + -- 1.3.6.1.4.1.9839.2.1.1.5 + heat-held OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Heat inhibited due to alarm condition" + DEFVAL { 0 } + ::= { digitalObjects 5 } + + -- 1.3.6.1.4.1.9839.2.1.1.6 + humidifier-inhibit OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Humidifier stopped due to alarm" + DEFVAL { 0 } + ::= { digitalObjects 6 } + + -- 1.3.6.1.4.1.9839.2.1.1.7 + dehum-inhibit OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Dehum is inhibited" + DEFVAL { 0 } + ::= { digitalObjects 7 } + + -- 1.3.6.1.4.1.9839.2.1.1.8 + rht-during-dehum OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "reheat during dehum" + DEFVAL { 0 } + ::= { digitalObjects 8 } + + -- 1.3.6.1.4.1.9839.2.1.1.9 + floor-wtr-alm OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Water under floor alarm" + DEFVAL { 0 } + ::= { digitalObjects 9 } + + -- 1.3.6.1.4.1.9839.2.1.1.10 + air-flow-alm OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "No air flow alarm" + DEFVAL { 0 } + ::= { digitalObjects 10 } + + -- 1.3.6.1.4.1.9839.2.1.1.11 + filter-alm OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Dirty filter from digital input" + DEFVAL { 0 } + ::= { digitalObjects 11 } + + -- 1.3.6.1.4.1.9839.2.1.1.12 + humidifier-alm OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Alarm from humidifier digital input" + DEFVAL { 0 } + ::= { digitalObjects 12 } + + -- 1.3.6.1.4.1.9839.2.1.1.13 + firestat-alm OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Temperature of return air above firestat alarm set point" + DEFVAL { 0 } + ::= { digitalObjects 13 } + + -- 1.3.6.1.4.1.9839.2.1.1.14 + shortcycle-alm OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "One or more comps has short cycled" + DEFVAL { 0 } + ::= { digitalObjects 14 } + + -- 1.3.6.1.4.1.9839.2.1.1.15 + humidity-fail OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Sensor is out of range" + DEFVAL { 0 } + ::= { digitalObjects 15 } + + -- 1.3.6.1.4.1.9839.2.1.1.16 + ret-air-fail OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Sensor is out of range" + DEFVAL { 0 } + ::= { digitalObjects 16 } + + -- 1.3.6.1.4.1.9839.2.1.1.17 + maint-alm OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Maintenance Schedule Due alarm" + DEFVAL { 0 } + ::= { digitalObjects 17 } + + -- 1.3.6.1.4.1.9839.2.1.1.18 + c1-hp-alm OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "High pressure alarm" + DEFVAL { 0 } + ::= { digitalObjects 18 } + + -- 1.3.6.1.4.1.9839.2.1.1.19 + c1-lp-alm OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Low pressure alarm" + DEFVAL { 0 } + ::= { digitalObjects 19 } + + -- 1.3.6.1.4.1.9839.2.1.1.20 + c2-hp-alm OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "High pressure alarm" + DEFVAL { 0 } + ::= { digitalObjects 20 } + + -- 1.3.6.1.4.1.9839.2.1.1.21 + c2-lp-alm OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Low pressure alarm" + DEFVAL { 0 } + ::= { digitalObjects 21 } + + -- 1.3.6.1.4.1.9839.2.1.1.22 + smoke-alm OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Smoke detected from digital input" + DEFVAL { 0 } + ::= { digitalObjects 22 } + + -- 1.3.6.1.4.1.9839.2.1.1.23 + wtr-flow-alm OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "No water flow alarm" + DEFVAL { 0 } + ::= { digitalObjects 23 } + + -- 1.3.6.1.4.1.9839.2.1.1.24 + disch-air-fail OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Sensor is out of range" + DEFVAL { 0 } + ::= { digitalObjects 24 } + + -- 1.3.6.1.4.1.9839.2.1.1.25 + ra-tmp-hi-alm OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Temperature of return air above alarm set point" + DEFVAL { 0 } + ::= { digitalObjects 25 } + + -- 1.3.6.1.4.1.9839.2.1.1.26 + ra-tmp-lo-alm OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Temperature of return air below alarm set point" + DEFVAL { 0 } + ::= { digitalObjects 26 } + + -- 1.3.6.1.4.1.9839.2.1.1.27 + hum-hi-alm OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Humidity above alarm set point" + DEFVAL { 0 } + ::= { digitalObjects 27 } + + -- 1.3.6.1.4.1.9839.2.1.1.28 + hum-lo-alm OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Humidity below alarm set point" + DEFVAL { 0 } + ::= { digitalObjects 28 } + + -- 1.3.6.1.4.1.9839.2.1.1.29 + fan-overload OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Fan overload" + DEFVAL { 0 } + ::= { digitalObjects 29 } + + -- 1.3.6.1.4.1.9839.2.1.1.30 + stdby-pump-on OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Standby pump on: Check primary pump -Optional alarm. Pump failure input signal required" + DEFVAL { 0 } + ::= { digitalObjects 30 } + + -- 1.3.6.1.4.1.9839.2.1.1.31 + cust-msg-sw1 OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Custom alarm #1 -Optional alarm. External alarm input required. Factory programmed custom message required" + DEFVAL { 0 } + ::= { digitalObjects 31 } + + -- 1.3.6.1.4.1.9839.2.1.1.32 + cust-msg-sw2 OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Custom alarm #2 -Optional alarm. External alarm input required. Factory programmed custom message required" + DEFVAL { 0 } + ::= { digitalObjects 32 } + + -- 1.3.6.1.4.1.9839.2.1.1.33 + cust-msg-sw3 OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Custom alarm #3 -Optional alarm. External alarm input required. Factory programmed custom message required" + DEFVAL { 0 } + ::= { digitalObjects 33 } + + -- 1.3.6.1.4.1.9839.2.1.1.34 + cust-msg-sw4 OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Custom alarm #4 -Optional alarm. External alarm input required. Factory programmed custom message required" + DEFVAL { 0 } + ::= { digitalObjects 34 } + + -- 1.3.6.1.4.1.9839.2.1.1.35 + humsw-inhibit OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Humidifier stopped due to custom alarm switch" + DEFVAL { 0 } + ::= { digitalObjects 35 } + + -- 1.3.6.1.4.1.9839.2.1.1.36 + heat-inhibit OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Heat inhibited due to custom switch alarm condition" + DEFVAL { 0 } + ::= { digitalObjects 36 } + + -- 1.3.6.1.4.1.9839.2.1.1.37 + rht-hum-inhibit OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Reheat and humidification inhibited from operation" + DEFVAL { 0 } + ::= { digitalObjects 37 } + + -- 1.3.6.1.4.1.9839.2.1.1.38 + disch-tmp-lo-alm OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Temperature of discharge air below alarm set point" + DEFVAL { 0 } + ::= { digitalObjects 38 } + + -- 1.3.6.1.4.1.9839.2.1.1.39 + override-alm OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Manual override: Check bypass switches - Standard alarm. Manual override switch is on" + DEFVAL { 0 } + ::= { digitalObjects 39 } + + -- 1.3.6.1.4.1.9839.2.1.1.40 + condensation-alm OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "High condensation from digital input" + DEFVAL { 0 } + ::= { digitalObjects 40 } + + -- 1.3.6.1.4.1.9839.2.1.1.41 + unit-in-standby OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Unit in standby, all functions held off - Optional alarm. Control input signal required Factory setting required " + DEFVAL { 0 } + ::= { digitalObjects 41 } + + -- 1.3.6.1.4.1.9839.2.1.1.42 + cw-sns-fail OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Sensor is out of range" + DEFVAL { 0 } + ::= { digitalObjects 42 } + + -- 1.3.6.1.4.1.9839.2.1.1.43 + humsw-chk-cyl OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Humidifier stopped due to custom alarm switch" + DEFVAL { 0 } + ::= { digitalObjects 43 } + + -- 1.3.6.1.4.1.9839.2.1.1.44 + bms-cooling-inhibit OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Cooling operation inhibited by BMS" + DEFVAL { 0 } + ::= { digitalObjects 44 } + + -- 1.3.6.1.4.1.9839.2.1.1.45 + bms-heat-inhibit OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Heat inhibited due to bms" + DEFVAL { 0 } + ::= { digitalObjects 45 } + + -- 1.3.6.1.4.1.9839.2.1.1.46 + bms-humidifier-inhibit OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Humidifier operation inhibited by BMS" + DEFVAL { 0 } + ::= { digitalObjects 46 } + + -- 1.3.6.1.4.1.9839.2.1.1.47 + bms-dehum-inhibit OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Dehumidify mode inhibited by bms" + DEFVAL { 0 } + ::= { digitalObjects 47 } + + -- 1.3.6.1.4.1.9839.2.1.1.48 + fan-inhibit-bms OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Inhibit fan by bms" + DEFVAL { 0 } + ::= { digitalObjects 48 } + + -- 1.3.6.1.4.1.9839.2.1.1.49 + hum-expect OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Reduces control humidity cycling" + DEFVAL { 0 } + ::= { digitalObjects 49 } + + -- 1.3.6.1.4.1.9839.2.1.1.50 + usashr-f-c OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Temperature Mode 0=_C 1=_F" + DEFVAL { 0 } + ::= { digitalObjects 50 } + + -- 1.3.6.1.4.1.9839.2.1.1.52 + lead-comp OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Lead compressor select 0= C1, 1= C2" + DEFVAL { 0 } + ::= { digitalObjects 52 } + + -- 1.3.6.1.4.1.9839.2.1.1.53 + wtrvlv-dir OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Water valve direct or reverse acting" + DEFVAL { 0 } + ::= { digitalObjects 53 } + + -- 1.3.6.1.4.1.9839.2.1.1.54 + ups-on-alm OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Alarm: UPS power on: Check main power -Optional alarm. External alarm input required" + DEFVAL { 0 } + ::= { digitalObjects 54 } + + -- 1.3.6.1.4.1.9839.2.1.1.55 + pwrup-alm OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Loss of power requires manual reset of alarm" + DEFVAL { 0 } + ::= { digitalObjects 55 } + + -- 1.3.6.1.4.1.9839.2.1.1.56 + seetag-cust-alm1 OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Local alarm #1: See tag inside door =Optional alarm. External alarm input required" + DEFVAL { 0 } + ::= { digitalObjects 56 } + + -- 1.3.6.1.4.1.9839.2.1.1.57 + seetag-cust-alm2 OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Local alarm #2: See tag inside door =Optional alarm. External alarm input required" + DEFVAL { 0 } + ::= { digitalObjects 57 } + + -- 1.3.6.1.4.1.9839.2.1.1.58 + seetag-cust-alm3 OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Local alarm #3: See tag inside door =Optional alarm. External alarm input required" + DEFVAL { 0 } + ::= { digitalObjects 58 } + + -- 1.3.6.1.4.1.9839.2.1.1.59 + seetag-cust-alm4 OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Local alarm #4: See tag inside door =Optional alarm. External alarm input required" + DEFVAL { 0 } + ::= { digitalObjects 59 } + + -- 1.3.6.1.4.1.9839.2.1.1.60 + shortcycle-alm-en OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Enable short cycle alarm of the compressors" + DEFVAL { 0 } + ::= { digitalObjects 60 } + + -- 1.3.6.1.4.1.9839.2.1.1.61 + superv-off OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Supervisor (BMS) On-Off. Show the state OFFbyBMS in main mask (1: Off; 0: On" + DEFVAL { 0 } + ::= { digitalObjects 61 } + + -- 1.3.6.1.4.1.9839.2.1.1.62 + BMS-heartbeat OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Bms heartbeat - pCO looks for update every 10 minutes" + DEFVAL { 0 } + ::= { digitalObjects 62 } + + + -- 1.3.6.1.4.1.9839.2.1.2 + analogObjects OBJECT IDENTIFIER ::= { dap4-alMIB 2 } + + -- 1.3.6.1.4.1.9839.2.1.2.1 + ret-air-tmp OBJECT-TYPE + SYNTAX Integer32 (-32768..32767) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Temperature of return air" + DEFVAL { 0 } + ::= { analogObjects 1 } + + -- 1.3.6.1.4.1.9839.2.1.2.2 + minmax-24hr-retair-maximum OBJECT-TYPE + SYNTAX Integer32 (-32768..32767) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Maximum Return air temp in last 24hrs" + DEFVAL { 0 } + ::= { analogObjects 2 } + + -- 1.3.6.1.4.1.9839.2.1.2.3 + minmax-24hr-retair-minumum OBJECT-TYPE + SYNTAX Integer32 (-32768..32767) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Minimum Return air temp in last 24hrs" + DEFVAL { 0 } + ::= { analogObjects 3 } + + -- 1.3.6.1.4.1.9839.2.1.2.4 + temp-setpoint OBJECT-TYPE + SYNTAX Integer32 (-9999..9999) + UNITS "N/A" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Temperature setpoint" + DEFVAL { 0 } + ::= { analogObjects 4 } + + -- 1.3.6.1.4.1.9839.2.1.2.5 + temp-deadband OBJECT-TYPE + SYNTAX Integer32 (0..99) + UNITS "N/A" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Amount from setpoint before a comp is staged on" + DEFVAL { 0 } + ::= { analogObjects 5 } + + -- 1.3.6.1.4.1.9839.2.1.2.6 + humidity-ain-offs OBJECT-TYPE + SYNTAX Integer32 (-32768..32767) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Humidity Sensor Calibration" + DEFVAL { 0 } + ::= { analogObjects 6 } + + -- 1.3.6.1.4.1.9839.2.1.2.7 + return-ain-offs OBJECT-TYPE + SYNTAX Integer32 (-32768..32767) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Return Temperature Sensor Calibration" + DEFVAL { 0 } + ::= { analogObjects 7 } + + -- 1.3.6.1.4.1.9839.2.1.2.8 + cw-tmp OBJECT-TYPE + SYNTAX Integer32 (-32768..32767) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Temperature of chilled water" + DEFVAL { 0 } + ::= { analogObjects 8 } + + -- 1.3.6.1.4.1.9839.2.1.2.9 + disch-air-tmp OBJECT-TYPE + SYNTAX Integer32 (-32768..32767) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Temperature of discharge air" + DEFVAL { 0 } + ::= { analogObjects 9 } + + -- 1.3.6.1.4.1.9839.2.1.2.10 + discharge-ain-offs OBJECT-TYPE + SYNTAX Integer32 (-32768..32767) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Discharge Temperature Sensor Calibration - Optional discharge air temperature sensor required (B9)" + DEFVAL { 0 } + ::= { analogObjects 10 } + + -- 1.3.6.1.4.1.9839.2.1.2.11 + cw-ain-offs OBJECT-TYPE + SYNTAX Integer32 (-32768..32767) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Chilled Water Temperature Sensor Calibration - Optional chilled water temperature sensor required (B10)" + DEFVAL { 0 } + ::= { analogObjects 11 } + + -- 1.3.6.1.4.1.9839.2.1.2.12 + engsaver-setpoint OBJECT-TYPE + SYNTAX Integer32 (-9999..9999) + UNITS "N/A" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Temperature setpoint where chilled water will is requested" + DEFVAL { 0 } + ::= { analogObjects 12 } + + -- 1.3.6.1.4.1.9839.2.1.2.13 + opt1-analog OBJECT-TYPE + SYNTAX Integer32 (-32768..32767) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Value of the analog input" + DEFVAL { 0 } + ::= { analogObjects 13 } + + -- 1.3.6.1.4.1.9839.2.1.2.14 + opt2-analog OBJECT-TYPE + SYNTAX Integer32 (-32768..32767) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Value of the analog input" + DEFVAL { 0 } + ::= { analogObjects 14 } + + -- 1.3.6.1.4.1.9839.2.1.2.15 + opt3-analog OBJECT-TYPE + SYNTAX Integer32 (-32768..32767) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Value of the analog input" + DEFVAL { 0 } + ::= { analogObjects 15 } + + -- 1.3.6.1.4.1.9839.2.1.2.16 + opt4-analog OBJECT-TYPE + SYNTAX Integer32 (-32768..32767) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Value of the analog input" + DEFVAL { 0 } + ::= { analogObjects 16 } + + -- 1.3.6.1.4.1.9839.2.1.2.17 + opt-sns-1-y1 OBJECT-TYPE + SYNTAX Integer32 (-32768..32767) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Analog Sensor 1 Minimum Value" + DEFVAL { 0 } + ::= { analogObjects 17 } + + -- 1.3.6.1.4.1.9839.2.1.2.18 + opt-sns-1-y2 OBJECT-TYPE + SYNTAX Integer32 (-32768..32767) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Analog Sensor 1 Maximum Value" + DEFVAL { 1000 } + ::= { analogObjects 18 } + + -- 1.3.6.1.4.1.9839.2.1.2.19 + opt-sns-1-ain-offs OBJECT-TYPE + SYNTAX Integer32 (-32768..32767) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Analog Sensor 1 Calibration" + DEFVAL { 0 } + ::= { analogObjects 19 } + + -- 1.3.6.1.4.1.9839.2.1.2.20 + opt-sns-2-y1 OBJECT-TYPE + SYNTAX Integer32 (-32768..32767) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Analog Sensor 2 Minimum Value" + DEFVAL { 0 } + ::= { analogObjects 20 } + + -- 1.3.6.1.4.1.9839.2.1.2.21 + opt-sns-2-y2 OBJECT-TYPE + SYNTAX Integer32 (-32768..32767) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Analog Sensor 2 Maximum Value" + DEFVAL { 1000 } + ::= { analogObjects 21 } + + -- 1.3.6.1.4.1.9839.2.1.2.22 + opt-sns-2-ain-offs OBJECT-TYPE + SYNTAX Integer32 (-32768..32767) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Analog Sensor 2 Calibration" + DEFVAL { 0 } + ::= { analogObjects 22 } + + -- 1.3.6.1.4.1.9839.2.1.2.23 + opt-sns-3-y1 OBJECT-TYPE + SYNTAX Integer32 (-32768..32767) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Analog Sensor 3 Minimum Value" + DEFVAL { 0 } + ::= { analogObjects 23 } + + -- 1.3.6.1.4.1.9839.2.1.2.24 + opt-sns-3-y2 OBJECT-TYPE + SYNTAX Integer32 (-32768..32767) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Analog Sensor 3 Maximum Value" + DEFVAL { 1000 } + ::= { analogObjects 24 } + + -- 1.3.6.1.4.1.9839.2.1.2.25 + opt-sns-3-ain-offs OBJECT-TYPE + SYNTAX Integer32 (-32768..32767) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Analog Sensor 3 Calibration" + DEFVAL { 0 } + ::= { analogObjects 25 } + + -- 1.3.6.1.4.1.9839.2.1.2.26 + opt-sns-4-y1 OBJECT-TYPE + SYNTAX Integer32 (-32768..32767) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Analog Sensor 4 Minimum Value" + DEFVAL { 0 } + ::= { analogObjects 26 } + + -- 1.3.6.1.4.1.9839.2.1.2.27 + opt-sns-4-y2 OBJECT-TYPE + SYNTAX Integer32 (-32768..32767) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Analog Sensor 4 Maximum Value" + DEFVAL { 1000 } + ::= { analogObjects 27 } + + -- 1.3.6.1.4.1.9839.2.1.2.28 + opt-sns-4-ain-offs OBJECT-TYPE + SYNTAX Integer32 (-32768..32767) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Analog Sensor 4 Calibration" + DEFVAL { 0 } + ::= { analogObjects 28 } + + + + -- 1.3.6.1.4.1.9839.2.1.3 + integerObjects OBJECT IDENTIFIER ::= { dap4-alMIB 3 } + + -- 1.3.6.1.4.1.9839.2.1.3.1 + disch-air-lo-sp OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "N/A" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Lower Limit alarm of discharge air temp" + DEFVAL { 0 } + ::= { integerObjects 1 } + + -- 1.3.6.1.4.1.9839.2.1.3.2 + humidity-dis OBJECT-TYPE + SYNTAX Integer32 (-999..999) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Relative humidity displayed as xx%" + DEFVAL { 0 } + ::= { integerObjects 2 } + + -- 1.3.6.1.4.1.9839.2.1.3.3 + stages-on OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Cooling Stages On, DX only" + DEFVAL { 0 } + ::= { integerObjects 3 } + + -- 1.3.6.1.4.1.9839.2.1.3.4 + heaters-on OBJECT-TYPE + SYNTAX Integer32 (-32768..32767) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Number of heat stages running" + DEFVAL { 0 } + ::= { integerObjects 4 } + + -- 1.3.6.1.4.1.9839.2.1.3.5 + minmax-24hr-hum-maximum OBJECT-TYPE + SYNTAX Integer32 (-32768..32767) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Maximum humidity in last 24hrs" + DEFVAL { 0 } + ::= { integerObjects 5 } + + -- 1.3.6.1.4.1.9839.2.1.3.6 + minmax-24hr-hum-minumum OBJECT-TYPE + SYNTAX Integer32 (-32768..32767) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Minimum humidity in last 24hrs" + DEFVAL { 0 } + ::= { integerObjects 6 } + + -- 1.3.6.1.4.1.9839.2.1.3.7 + comp-duty OBJECT-TYPE + SYNTAX Integer32 (0..999) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Cooling Utilization Over Last Hour -Percentage of cooling is used in the last hour of operation; this point applies to DX unit." + DEFVAL { 0 } + ::= { integerObjects 7 } + + -- 1.3.6.1.4.1.9839.2.1.3.8 + heat-duty OBJECT-TYPE + SYNTAX Integer32 (0..999) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Heating Utilization Over Last Hour -Percentage of heating is used in the last hour of operation" + DEFVAL { 0 } + ::= { integerObjects 8 } + + -- 1.3.6.1.4.1.9839.2.1.3.9 + hum-duty OBJECT-TYPE + SYNTAX Integer32 (0..999) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Humidifier Utilization Over Last Hour -Percentage of humidifier is used in the last hour of operation" + DEFVAL { 0 } + ::= { integerObjects 9 } + + -- 1.3.6.1.4.1.9839.2.1.3.10 + c1-hours-h OBJECT-TYPE + SYNTAX Integer32 (-32768..32767) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Compressor 1 Runtime -This point applies to DX unit with one compressor -high" + DEFVAL { 0 } + ::= { integerObjects 10 } + + -- 1.3.6.1.4.1.9839.2.1.3.11 + c1-hours-l OBJECT-TYPE + SYNTAX Integer32 (-32768..32767) + UNITS "hour" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Compressor 1 Runtime -This point applies to DX unit with one compressor -low" + DEFVAL { 0 } + ::= { integerObjects 11 } + + -- 1.3.6.1.4.1.9839.2.1.3.12 + c2-hours-h OBJECT-TYPE + SYNTAX Integer32 (-32768..32767) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Compressor 2 Runtime -This point applies to DX unit with dual compressor - high" + DEFVAL { 0 } + ::= { integerObjects 12 } + + -- 1.3.6.1.4.1.9839.2.1.3.13 + c2-hours-l OBJECT-TYPE + SYNTAX Integer32 (-32768..32767) + UNITS "hour" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Compressor 2 Runtime -This point applies to DX unit with dual compressor - low" + DEFVAL { 0 } + ::= { integerObjects 13 } + + -- 1.3.6.1.4.1.9839.2.1.3.14 + ht1-hours-h OBJECT-TYPE + SYNTAX Integer32 (-32768..32767) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Heater 1 Runtime - high" + DEFVAL { 0 } + ::= { integerObjects 14 } + + -- 1.3.6.1.4.1.9839.2.1.3.15 + ht1-hours-l OBJECT-TYPE + SYNTAX Integer32 (-32768..32767) + UNITS "hour" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Heater 1 Runtime - low" + DEFVAL { 0 } + ::= { integerObjects 15 } + + -- 1.3.6.1.4.1.9839.2.1.3.16 + current-second OBJECT-TYPE + SYNTAX Integer32 (0..59) + UNITS "sec" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Current second" + DEFVAL { 0 } + ::= { integerObjects 16 } + + -- 1.3.6.1.4.1.9839.2.1.3.17 + current-minute OBJECT-TYPE + SYNTAX Integer32 (0..59) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Current minute" + DEFVAL { 0 } + ::= { integerObjects 17 } + + -- 1.3.6.1.4.1.9839.2.1.3.18 + current-hour OBJECT-TYPE + SYNTAX Integer32 (0..23) + UNITS "hour" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Current hour" + DEFVAL { 0 } + ::= { integerObjects 18 } + + -- 1.3.6.1.4.1.9839.2.1.3.19 + current-day OBJECT-TYPE + SYNTAX Integer32 (1..31) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Current day" + DEFVAL { 1 } + ::= { integerObjects 19 } + + -- 1.3.6.1.4.1.9839.2.1.3.20 + current-month OBJECT-TYPE + SYNTAX Integer32 (1..12) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Current month" + DEFVAL { 1 } + ::= { integerObjects 20 } + + -- 1.3.6.1.4.1.9839.2.1.3.21 + current-year OBJECT-TYPE + SYNTAX Integer32 (0..99) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Current year" + DEFVAL { 0 } + ::= { integerObjects 21 } + + -- 1.3.6.1.4.1.9839.2.1.3.22 + firestat-sp OBJECT-TYPE + SYNTAX Integer32 (0..999) + UNITS "N/A" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Alarm settting of return air temp to determine there is a fire" + DEFVAL { 0 } + ::= { integerObjects 22 } + + -- 1.3.6.1.4.1.9839.2.1.3.23 + hum-hi-sp OBJECT-TYPE + SYNTAX Integer32 (0..99) + UNITS "N/A" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Humidity upper limit alarm" + DEFVAL { 0 } + ::= { integerObjects 23 } + + -- 1.3.6.1.4.1.9839.2.1.3.24 + ret-air-hi-sp OBJECT-TYPE + SYNTAX Integer32 (-32768..32767) + UNITS "N/A" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Upper limit alarm of return air temp" + DEFVAL { 0 } + ::= { integerObjects 24 } + + -- 1.3.6.1.4.1.9839.2.1.3.25 + hum-lo-sp OBJECT-TYPE + SYNTAX Integer32 (0..99) + UNITS "N/A" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Humidity lower limit alarm" + DEFVAL { 0 } + ::= { integerObjects 25 } + + -- 1.3.6.1.4.1.9839.2.1.3.26 + ret-air-lo-sp OBJECT-TYPE + SYNTAX Integer32 (-32768..32767) + UNITS "N/A" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Lower limit alarm of return air temp" + DEFVAL { 0 } + ::= { integerObjects 26 } + + -- 1.3.6.1.4.1.9839.2.1.3.27 + hum-deadband OBJECT-TYPE + SYNTAX Integer32 (0..999) + UNITS "N/A" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "amount hum must change from setpoint before acting" + DEFVAL { 0 } + ::= { integerObjects 27 } + + -- 1.3.6.1.4.1.9839.2.1.3.28 + hum-setpoint OBJECT-TYPE + SYNTAX Integer32 (0..999) + UNITS "N/A" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "humidity setpoint" + DEFVAL { 0 } + ::= { integerObjects 28 } + + -- 1.3.6.1.4.1.9839.2.1.3.29 + start-dly OBJECT-TYPE + SYNTAX Integer32 (1..600) + UNITS "N/A" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Time before the system starts up" + DEFVAL { 10 } + ::= { integerObjects 29 } + + -- 1.3.6.1.4.1.9839.2.1.3.30 + alm1-del OBJECT-TYPE + SYNTAX Integer32 (0..32000) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Optional Alarm 1 Delay" + DEFVAL { 0 } + ::= { integerObjects 30 } + + -- 1.3.6.1.4.1.9839.2.1.3.31 + alm2-del OBJECT-TYPE + SYNTAX Integer32 (0..32000) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Optional Alarm 2 Delay" + DEFVAL { 0 } + ::= { integerObjects 31 } + + -- 1.3.6.1.4.1.9839.2.1.3.32 + alm3-del OBJECT-TYPE + SYNTAX Integer32 (0..32000) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Optional Alarm 3 Delay" + DEFVAL { 0 } + ::= { integerObjects 32 } + + -- 1.3.6.1.4.1.9839.2.1.3.33 + alarm1-txt OBJECT-TYPE + SYNTAX Integer32 (0..16) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Message on optional alarm screen, some also add function" + DEFVAL { 0 } + ::= { integerObjects 33 } + + -- 1.3.6.1.4.1.9839.2.1.3.34 + alarm2-txt OBJECT-TYPE + SYNTAX Integer32 (0..16) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Message on optional alarm screen, some also add function" + DEFVAL { 0 } + ::= { integerObjects 34 } + + -- 1.3.6.1.4.1.9839.2.1.3.35 + alarm3-txt OBJECT-TYPE + SYNTAX Integer32 (0..16) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Message on optional alarm screen, some also add function" + DEFVAL { 0 } + ::= { integerObjects 35 } + + -- 1.3.6.1.4.1.9839.2.1.3.36 + alarm4-txt OBJECT-TYPE + SYNTAX Integer32 (0..16) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Message on optional alarm screen, some also add function" + DEFVAL { 0 } + ::= { integerObjects 36 } + + -- 1.3.6.1.4.1.9839.2.1.3.37 + comp-sel OBJECT-TYPE + SYNTAX Integer32 (0..5) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Comps 0=none, 1=one, 2=one+UL, 3=two, 4=two+UL, 5=Four/two circuit" + DEFVAL { 0 } + ::= { integerObjects 37 } + + -- 1.3.6.1.4.1.9839.2.1.3.38 + dehum-mode OBJECT-TYPE + SYNTAX Integer32 (0..4) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "0=none, 1= comp limited, 2=twocomp limited, 3= comp unlimited, 4=twocomp unlimited" + DEFVAL { 0 } + ::= { integerObjects 38 } + + -- 1.3.6.1.4.1.9839.2.1.3.39 + reheat-sel OBJECT-TYPE + SYNTAX Integer32 (0..3) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Number of heat stages" + DEFVAL { 0 } + ::= { integerObjects 39 } + + -- 1.3.6.1.4.1.9839.2.1.3.40 + hum-sel OBJECT-TYPE + SYNTAX Integer32 (0..4) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "0=none, 1=comp mod, 2=comp non, 3= comf mod, 4= conf non mod" + DEFVAL { 0 } + ::= { integerObjects 40 } + + -- 1.3.6.1.4.1.9839.2.1.3.41 + alm-contact-msg OBJECT-TYPE + SYNTAX Integer32 (0..4) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Text displayed on all alarm screens" + DEFVAL { 0 } + ::= { integerObjects 41 } + + -- 1.3.6.1.4.1.9839.2.1.3.42 + powerup-sel OBJECT-TYPE + SYNTAX Integer32 (0..2) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "0= start wo/alarm, 1= start w/alarm, 2= requires reset of alarm" + DEFVAL { 0 } + ::= { integerObjects 42 } + + -- 1.3.6.1.4.1.9839.2.1.3.43 + buzzer-select OBJECT-TYPE + SYNTAX Integer32 (0..3) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "0=None, 1=short beeps, 2=long beep, 3=Constant" + DEFVAL { 0 } + ::= { integerObjects 43 } + + -- 1.3.6.1.4.1.9839.2.1.3.44 + cw-disp OBJECT-TYPE + SYNTAX Integer32 (0..999) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "% of 10volts of analog output #1" + DEFVAL { 0 } + ::= { integerObjects 44 } + + -- 1.3.6.1.4.1.9839.2.1.3.45 + wtrvlv-duty OBJECT-TYPE + SYNTAX Integer32 (0..999) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Chilled Water Utilization Over Last Hour - This applies to Chilled water or Energy saver units. " + DEFVAL { 0 } + ::= { integerObjects 45 } + + -- 1.3.6.1.4.1.9839.2.1.3.46 + hum-hours-h OBJECT-TYPE + SYNTAX Integer32 (-32768..32767) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Humidifier Runtime - high" + DEFVAL { 0 } + ::= { integerObjects 46 } + + -- 1.3.6.1.4.1.9839.2.1.3.47 + hum-hours-l OBJECT-TYPE + SYNTAX Integer32 (-32768..32767) + UNITS "hour" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Humidifier Runtime - low" + DEFVAL { 0 } + ::= { integerObjects 47 } + + -- 1.3.6.1.4.1.9839.2.1.3.48 + blower-hours-h OBJECT-TYPE + SYNTAX Integer32 (-32768..32767) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Blower Runtime - high" + DEFVAL { 0 } + ::= { integerObjects 48 } + + -- 1.3.6.1.4.1.9839.2.1.3.49 + blower-hours-l OBJECT-TYPE + SYNTAX Integer32 (-32768..32767) + UNITS "hour" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Blower Runtime - low" + DEFVAL { 0 } + ::= { integerObjects 49 } + + -- 1.3.6.1.4.1.9839.2.1.3.50 + alm4-del OBJECT-TYPE + SYNTAX Integer32 (0..32000) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Optional Alarm 4 Delay" + DEFVAL { 0 } + ::= { integerObjects 50 } + + -- 1.3.6.1.4.1.9839.2.1.3.51 + assist-sel OBJECT-TYPE + SYNTAX Integer32 (0..5) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "0= no comp assist, 1=one comp assist, 2= two comp assist, 3... 4..." + DEFVAL { 0 } + ::= { integerObjects 51 } + + -- 1.3.6.1.4.1.9839.2.1.3.52 + wtrvlv-sel OBJECT-TYPE + SYNTAX Integer32 (0..4) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Water valve type 0=none, 1=chill, 2=Engy, 3=Aux chill, 4=Disc Reg" + DEFVAL { 0 } + ::= { integerObjects 52 } + + -- 1.3.6.1.4.1.9839.2.1.3.53 + wtrvlv-volts-sel OBJECT-TYPE + SYNTAX Integer32 (0..4) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Water valve voltage 0= 0-10, 1=2-10, 2=7-10, 3=6-9, 4=4-7" + DEFVAL { 0 } + ::= { integerObjects 53 } + + -- 1.3.6.1.4.1.9839.2.1.3.54 + hum-volts OBJECT-TYPE + SYNTAX Integer32 (0..999) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "% of 10volts of analog output #2" + DEFVAL { 0 } + ::= { integerObjects 54 } + + -- 1.3.6.1.4.1.9839.2.1.3.55 + dehum-hours-h OBJECT-TYPE + SYNTAX Integer32 (-32768..32767) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Dehumidifier Runtime - High" + DEFVAL { 0 } + ::= { integerObjects 55 } + + -- 1.3.6.1.4.1.9839.2.1.3.56 + dehum-hours-l OBJECT-TYPE + SYNTAX Integer32 (-32768..32767) + UNITS "hour" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Dehumidifier Runtime - Low" + DEFVAL { 0 } + ::= { integerObjects 56 } + + -- 1.3.6.1.4.1.9839.2.1.3.58 + autoflush-dly OBJECT-TYPE + SYNTAX Integer32 (0..99) + UNITS "hour" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Time between drain cycles 0=12hr, 1=24hr, 2=48hr, 3=96hr, 4=None" + DEFVAL { 0 } + ::= { integerObjects 58 } + + -- 1.3.6.1.4.1.9839.2.1.3.59 + y4-out OBJECT-TYPE + SYNTAX Integer32 (-32768..32767) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Value sent to optional analog output#1" + DEFVAL { 0 } + ::= { integerObjects 59 } + + -- 1.3.6.1.4.1.9839.2.1.3.60 + y5-out OBJECT-TYPE + SYNTAX Integer32 (-32768..32767) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Value sent to optional analog output#2" + DEFVAL { 0 } + ::= { integerObjects 60 } + + -- 1.3.6.1.4.1.9839.2.1.3.61 + air-flow OBJECT-TYPE + SYNTAX Integer32 (-32768..32767) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Current Fan Airflow - Based on calculated Pressure Diff formula" + DEFVAL { 0 } + ::= { integerObjects 61 } + + -- 1.3.6.1.4.1.9839.2.1.3.62 + opt-snsr1-name OBJECT-TYPE + SYNTAX Integer32 (-32768..32767) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Name of the sensor" + DEFVAL { 0 } + ::= { integerObjects 62 } + + -- 1.3.6.1.4.1.9839.2.1.3.63 + opt-sns-1-ain-type OBJECT-TYPE + SYNTAX Integer32 (0..9) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Analog Sensor 1 Type {0=NTC 1=PT1000 2=0-1VDC 3=0-10VDC 4=4-20mA 5=ON/OFF 6=0-5VDC 7=NTC HT 8=-50T90 9=10T170}" + DEFVAL { 0 } + ::= { integerObjects 63 } + + -- 1.3.6.1.4.1.9839.2.1.3.64 + opt-snsr2-name OBJECT-TYPE + SYNTAX Integer32 (-32768..32767) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Name of the sensor" + DEFVAL { 0 } + ::= { integerObjects 64 } + + -- 1.3.6.1.4.1.9839.2.1.3.65 + opt-sns-2-ain-type OBJECT-TYPE + SYNTAX Integer32 (0..9) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Analog Sensor 2 Type {0=NTC 1=PT1000 2=0-1VDC 3=0-10VDC 4=4-20mA 5=ON/OFF 6=0-5VDC 7=NTC HT 8=-50T90 9=10T170}" + DEFVAL { 0 } + ::= { integerObjects 65 } + + -- 1.3.6.1.4.1.9839.2.1.3.66 + opt-snsr3-name OBJECT-TYPE + SYNTAX Integer32 (-32768..32767) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Name of the sensor" + DEFVAL { 0 } + ::= { integerObjects 66 } + + -- 1.3.6.1.4.1.9839.2.1.3.67 + opt-sns-3-ain-type OBJECT-TYPE + SYNTAX Integer32 (0..9) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Analog Sensor 3 Type {0=NTC 1=PT1000 2=0-1VDC 3=0-10VDC 4=4-20mA 5=ON/OFF 6=0-5VDC 7=NTC HT 8=-50T90 9=10T170}" + DEFVAL { 0 } + ::= { integerObjects 67 } + + -- 1.3.6.1.4.1.9839.2.1.3.68 + opt-snsr4-name OBJECT-TYPE + SYNTAX Integer32 (-32768..32767) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Name of the sensor" + DEFVAL { 0 } + ::= { integerObjects 68 } + + -- 1.3.6.1.4.1.9839.2.1.3.69 + opt-sns-4-ain-type OBJECT-TYPE + SYNTAX Integer32 (0..9) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Analog Sensor 4 Type {0=NTC 1=PT1000 2=0-1VDC 3=0-10VDC 4=4-20mA 5=ON/OFF 6=0-5VDC 7=NTC HT 8=-50T90 9=10T170}" + DEFVAL { 0 } + ::= { integerObjects 69 } + + -- 1.3.6.1.4.1.9839.2.1.3.70 + cw-fan-speed-bms OBJECT-TYPE + SYNTAX Integer32 (0..100) + UNITS "N/A" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "CW Fan speed (%) sent via BMS" + DEFVAL { 0 } + ::= { integerObjects 70 } + + -- 1.3.6.1.4.1.9839.2.1.3.71 + dx-fan-speed-bms OBJECT-TYPE + SYNTAX Integer32 (0..100) + UNITS "N/A" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "DX Fan speed (%) sent via BMS" + DEFVAL { 0 } + ::= { integerObjects 71 } + + -- 1.3.6.1.4.1.9839.2.1.3.72 + fan-speed-max OBJECT-TYPE + SYNTAX Integer32 (70..100) + UNITS "N/A" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Maximum Fan speed (% of output) modulation." + DEFVAL { 100 } + ::= { integerObjects 72 } + + -- 1.3.6.1.4.1.9839.2.1.3.73 + fan-speed-min OBJECT-TYPE + SYNTAX Integer32 (40..100) + UNITS "N/A" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Minimum Fan speed (% of output) modulation from pressure." + DEFVAL { 40 } + ::= { integerObjects 73 } + + -- 1.3.6.1.4.1.9839.2.1.3.74 + fan-pr-sp OBJECT-TYPE + SYNTAX Integer32 (0..1001) + UNITS "N/A" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Fan pressure setpoint (0.01 inches of water)" + DEFVAL { 0 } + ::= { integerObjects 74 } + + -- 1.3.6.1.4.1.9839.2.1.3.75 + fan-pr-band OBJECT-TYPE + SYNTAX Integer32 (1..100) + UNITS "N/A" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Fan pressure band (0.01 inches of water)" + DEFVAL { 5 } + ::= { integerObjects 75 } + + -- 1.3.6.1.4.1.9839.2.1.3.76 + fan-af-max OBJECT-TYPE + SYNTAX Integer32 (0..32000) + UNITS "N/A" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Maximum air flow limit of setpoint from BMS or valve modulation." + DEFVAL { 1000 } + ::= { integerObjects 76 } + + -- 1.3.6.1.4.1.9839.2.1.3.77 + fan-af-min OBJECT-TYPE + SYNTAX Integer32 (0..32000) + UNITS "N/A" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Minimum air flow limit of setpoint from BMS or valve modulation." + DEFVAL { 1000 } + ::= { integerObjects 77 } + + -- 1.3.6.1.4.1.9839.2.1.3.78 + fan-kfactor OBJECT-TYPE + SYNTAX Integer32 (100..500) + UNITS "N/A" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Fan K Factor" + DEFVAL { 200 } + ::= { integerObjects 78 } + + -- 1.3.6.1.4.1.9839.2.1.3.79 + num-fans OBJECT-TYPE + SYNTAX Integer32 (1..3) + UNITS "N/A" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Number of fans installed in this unit" + DEFVAL { 1 } + ::= { integerObjects 79 } + + -- 1.3.6.1.4.1.9839.2.1.3.81 + ht2-hours-h OBJECT-TYPE + SYNTAX Integer32 (-32768..32767) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Heater 2 Runtime - high" + DEFVAL { 0 } + ::= { integerObjects 81 } + + -- 1.3.6.1.4.1.9839.2.1.3.82 + ht2-hours-l OBJECT-TYPE + SYNTAX Integer32 (-32768..32767) + UNITS "hour" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Heater 2 Runtime - low" + DEFVAL { 0 } + ::= { integerObjects 82 } + + -- 1.3.6.1.4.1.9839.2.1.3.83 + ht3-hours-h OBJECT-TYPE + SYNTAX Integer32 (-32768..32767) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Heater 3 Runtime - high" + DEFVAL { 0 } + ::= { integerObjects 83 } + + -- 1.3.6.1.4.1.9839.2.1.3.84 + ht3-hours-l OBJECT-TYPE + SYNTAX Integer32 (-32768..32767) + UNITS "hour" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Heater 3 Runtime - low" + DEFVAL { 0 } + ::= { integerObjects 84 } + + -- 1.3.6.1.4.1.9839.2.1.3.85 + engy-hours-h OBJECT-TYPE + SYNTAX Integer32 (-32768..32767) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Energy Saver Runtime - This optional point applies to energy saver units only -high" + DEFVAL { 0 } + ::= { integerObjects 85 } + + -- 1.3.6.1.4.1.9839.2.1.3.86 + engy-hours-l OBJECT-TYPE + SYNTAX Integer32 (-32768..32767) + UNITS "hour" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Energy Saver Runtime - This optional point applies to energy saver units only - low" + DEFVAL { 0 } + ::= { integerObjects 86 } + + -- 1.3.6.1.4.1.9839.2.1.3.87 + cw-hours-h OBJECT-TYPE + SYNTAX Integer32 (-32768..32767) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Chilled Water Runtime - This applies to chilled water units only - high" + DEFVAL { 0 } + ::= { integerObjects 87 } + + -- 1.3.6.1.4.1.9839.2.1.3.88 + cw-hours-l OBJECT-TYPE + SYNTAX Integer32 (-32768..32767) + UNITS "hour" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Chilled Water Runtime - This applies to chilled water units only - low" + DEFVAL { 0 } + ::= { integerObjects 88 } + + -- 1.3.6.1.4.1.9839.2.1.3.89 + c3-hours-h OBJECT-TYPE + SYNTAX Integer32 (-32768..32767) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Compressor 3 Runtime - This applies when unit has four stages tandem compressors - high" + DEFVAL { 0 } + ::= { integerObjects 89 } + + -- 1.3.6.1.4.1.9839.2.1.3.90 + c3-hours-l OBJECT-TYPE + SYNTAX Integer32 (-32768..32767) + UNITS "hour" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Compressor 3 Runtime - This applies when unit has four stages tandem compressors - low" + DEFVAL { 0 } + ::= { integerObjects 90 } + + -- 1.3.6.1.4.1.9839.2.1.3.91 + c4-hours-l OBJECT-TYPE + SYNTAX Integer32 (-32768..32767) + UNITS "hour" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Compressor 4 Runtime - This applies when unit has four stages tandem compressors. - high" + DEFVAL { 0 } + ::= { integerObjects 91 } + + -- 1.3.6.1.4.1.9839.2.1.3.92 + c4-hours-h OBJECT-TYPE + SYNTAX Integer32 (-32768..32767) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Compressor 4 Runtime - This applies when unit has four stages tandem compressors. - low" + DEFVAL { 0 } + ::= { integerObjects 92 } + + -- 1.3.6.1.4.1.9839.2.1.3.93 + cond-hours-h OBJECT-TYPE + SYNTAX Integer32 (-32768..32767) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Condenser Runtime - high" + DEFVAL { 0 } + ::= { integerObjects 93 } + + -- 1.3.6.1.4.1.9839.2.1.3.94 + cond-hours-l OBJECT-TYPE + SYNTAX Integer32 (-32768..32767) + UNITS "hour" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Condenser Runtime - low" + DEFVAL { 0 } + ::= { integerObjects 94 } + + -- 1.3.6.1.4.1.9839.2.1.3.95 + dx-fan-speed OBJECT-TYPE + SYNTAX Integer32 (60..100) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Fan speed (% of output) when compressor cooling." + DEFVAL { 85 } + ::= { integerObjects 95 } + + -- 1.3.6.1.4.1.9839.2.1.3.96 + cw-fan-speed OBJECT-TYPE + SYNTAX Integer32 (60..100) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Fan speed (% of output) when cold water cooling." + DEFVAL { 85 } + ::= { integerObjects 96 } + + -- 1.3.6.1.4.1.9839.2.1.3.97 + fan-af-dx-sp OBJECT-TYPE + SYNTAX Integer32 (0..32000) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Fan air flow setpoint for DX unit (cfm)" + DEFVAL { 0 } + ::= { integerObjects 97 } + + -- 1.3.6.1.4.1.9839.2.1.3.98 + fan-af-cw-sp OBJECT-TYPE + SYNTAX Integer32 (0..32000) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Fan air flow setpoint for CW unit (cfm)" + DEFVAL { 0 } + ::= { integerObjects 98 } + + -- 1.3.6.1.4.1.9839.2.1.3.99 + zm-airflow-sp OBJECT-TYPE + SYNTAX Integer32 (-32768..32767) + UNITS "N/A" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Zone Airflow Setpoint kcfm" + DEFVAL { 0 } + ::= { integerObjects 99 } + + + + END + +-- +-- DataAire-dap4-al.MIB +-- |