Initial commitHEADmain

1 files changed, 301 insertions, 0 deletions

diff --git a/MIBS/comware/HH3C-MPLSOAM-PS-MIB b/MIBS/comware/HH3C-MPLSOAM-PS-MIB
new file mode 100644
index 0000000..525eeb3
--- /dev/null
+++ b/MIBS/comware/HH3C-MPLSOAM-PS-MIB
@@ -0,0 +1,301 @@
+-- ==================================================================
+-- Copyright (C) 2005 New H3C Tech. Co., Ltd. All rights reserved.
+--
+-- Description: MPLSOAM PS(protection switching) MIB
+-- Reference:
+-- Version: V1.0
+-- History:
+-- V1.0 2007-03-31 Created by LiXufu ID: 05023
+-- ==================================================================
+HH3C-MPLSOAM-PS-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+        hh3cCommon
+    FROM HH3C-OID-MIB
+        Integer32, Unsigned32, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE
+    FROM SNMPv2-SMI
+        TruthValue, RowStatus
+    FROM SNMPv2-TC;
+
+
+hh3cMplsOamPs MODULE-IDENTITY
+    LAST-UPDATED "200703310000Z"            -- March 31, 2007 at 00:00 GMT
+    ORGANIZATION
+        "New H3C Tech. Co., Ltd."
+    CONTACT-INFO
+        "Platform Team New H3C Tech. Co., Ltd.
+        Hai-Dian District Beijing P.R. China
+        http://www.h3c.com
+        Zip:100085
+        "
+    DESCRIPTION
+        "This MIB contains objects to configure mpls
+        protect-switch module."
+    ::= { hh3cCommon 80 }
+
+
+-- ==================================================================
+--
+-- ======================= definition begin =========================
+--
+-- ==================================================================
+hh3cMplsOamPsScalarGroup OBJECT IDENTIFIER ::= { hh3cMplsOamPs 1 }
+
+hh3cMplsOamPsTrapOpen OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "Whether mpls protect-switch trap is globally enabled.
+        false: disable;
+        true: enable"
+    DEFVAL  { false }
+    ::= { hh3cMplsOamPsScalarGroup 1 }
+
+hh3cMplsOamPsTable OBJECT IDENTIFIER ::= { hh3cMplsOamPs 2 }
+
+hh3cMplsPsTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF Hh3cMplsPsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table specifies per-protection-group MPLS PS
+        capability and associated information."
+    ::= { hh3cMplsOamPsTable 1 }
+
+hh3cMplsPsEntry OBJECT-TYPE
+    SYNTAX      Hh3cMplsPsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry in this table is created by an LSR for every
+        protection group capable of supporting mpls ps."
+    INDEX
+        {
+            hh3cMplsPsIndex
+        }
+    ::= { hh3cMplsPsTable 1 }
+
+Hh3cMplsPsEntry ::= SEQUENCE
+    {
+        hh3cMplsPsIndex                 Integer32,
+        hh3cMplsPsGroupID               Integer32,
+        hh3cMplsPsWorkLspName           OCTET STRING,
+        hh3cMplsPsProtectLspName        OCTET STRING,
+        hh3cMplsPsRevertiveMode         Integer32,
+        hh3cMplsPsWTR                   Integer32,
+        hh3cMplsPsHoldOff               Integer32,
+        hh3cMplsPsSwitchCondition       Integer32,
+        hh3cMplsPsWorkLspDetectState    Integer32,
+        hh3cMplsPsWorkLspUpDownState    Integer32,
+        hh3cMplsPsProtLspDetectState    Integer32,
+        hh3cMplsPsProtLspUpDownState    Integer32,
+        hh3cMplsPsSwitchResult          Integer32,
+        hh3cMplsPsRowStatus             RowStatus
+    }
+
+hh3cMplsPsIndex OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This is a unique index for an entry in the mplspsEntry."
+    ::= { hh3cMplsPsEntry 1 }
+
+hh3cMplsPsGroupID OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This is a unique group id for an entry in the mplspsEntry.
+        One protect-switch group is composed of one working static-lsp
+        and one protection static-lsp."
+    ::= { hh3cMplsPsEntry 2 }
+
+hh3cMplsPsWorkLspName OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The name of the working static-lsp."
+    ::= { hh3cMplsPsEntry 3 }
+
+hh3cMplsPsProtectLspName OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The name of the protection static-lsp."
+    ::= { hh3cMplsPsEntry 4 }
+
+hh3cMplsPsRevertiveMode OBJECT-TYPE
+    SYNTAX      Integer32(1..2)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Revertive mode is a protection switching mode where revertive
+        action (switch back to the working LSP) is taken after the
+        working LSP is repaired. And switching does not occur in a
+        non-revertive mode.
+        1: revertive;
+        2: non-revertive;"
+    ::= { hh3cMplsPsEntry 5 }
+
+hh3cMplsPsWTR OBJECT-TYPE
+    SYNTAX      Integer32
+    UNITS       "30s"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Wait to Restore timer is only applicable for the revertive mode
+        and applies to a working LSP, it prevents reversion back to
+        select the working LSP until the Wait to Restore timer has
+        expired.
+        The default value is 12 minutes. step is 30s."
+    ::= { hh3cMplsPsEntry 6 }
+
+hh3cMplsPsHoldOff OBJECT-TYPE
+    SYNTAX      Integer32
+    UNITS       "100ms"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The time between declaration of signal degrade or signal fail,
+        and the initialization of the protection switching algorithm.
+        Step is 100ms, maximum is 10s."
+    ::= { hh3cMplsPsEntry 7 }
+
+hh3cMplsPsSwitchCondition OBJECT-TYPE
+    SYNTAX      Integer32(1..9)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The current switch condition of the protection group.
+        1: clear, this command clears all of the externally
+        initiated switch commands listed below;
+        2: lockout of protection, fix the selector position on the
+        working LSP, Prevents the selector from switching to the
+        protection LSP when it is selecting the working LSP.
+        Switches the selector from the protection to the working LSP
+        when it is selecting the protection LSP;
+        3: forced protection, switches the selector from the working LSP
+        to the protection LSP (unless a higher priority switch
+        request (i.e., LoP) is in effect);
+        4: signal fail, for 1:1, Signal Fail (SF) is declared when the
+        source of the protection domain enters the Defect State by
+        receiving a BDI packet (from the return LSP or out of band).
+        5: manual switch for working-lsp, switches the selector from the
+        working LSP to the protection LSP (unless an equal or higher
+        priority switch request (i.e., LoP, FS, SF or MS) is in
+        effect);
+        6: manual switch for protection-lsp, switches the selector from
+        the protection LSP to the working LSP (unless an equal or
+        higher priority switch request (i.e., LoP, FS, SF or MS) is
+        in effect).
+        7: WTR-timer, a configurable timer which is used to delay before
+        reversion;
+        8: HoldOff-timer, the time between declaration of signal degrade
+        or signal fail, and the initialization of the protection
+        switching algorithm;
+        9: Others;
+        The pripority of the commands are:
+        clear > lockout of protection > force switch > manual switch for working
+        lsp = manual switch for protection lsp"
+    ::= { hh3cMplsPsEntry 8 }
+
+hh3cMplsPsWorkLspDetectState OBJECT-TYPE
+    SYNTAX      Integer32(1..2)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The state of working static-lsp state in one protection group,
+        whether it is in defect:
+        1: it is out of defect;
+        2: it enters defect."
+    ::= { hh3cMplsPsEntry 9 }
+
+hh3cMplsPsWorkLspUpDownState OBJECT-TYPE
+    SYNTAX      Integer32(1..2)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The state of working static-lsp state in one protection group,
+        whether it is up or down:
+        1: it is in up state;
+        2: it is in down state."
+    ::= { hh3cMplsPsEntry 10 }
+
+hh3cMplsPsProtLspDetectState OBJECT-TYPE
+    SYNTAX      Integer32(1..2)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The state of protection static-lsp state in one protection group,
+        whether it is in detection:
+        1: it is out of defect;
+        2: it enters defect."
+    ::= { hh3cMplsPsEntry 11 }
+
+hh3cMplsPsProtLspUpDownState OBJECT-TYPE
+    SYNTAX      Integer32(1..2)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The state of protection static-lsp state in one protection group,
+        whether it is up or down:
+        1: it is in up state;
+        2: it is in down state."
+    ::= { hh3cMplsPsEntry 12 }
+
+hh3cMplsPsSwitchResult OBJECT-TYPE
+    SYNTAX      Integer32(1..2)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Which tunnel is used to transfer the data stream.
+        1: working static-lsp;
+        2: protection static-lsp."
+    ::= { hh3cMplsPsEntry 13 }
+
+hh3cMplsPsRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object is responsible for managing the creation,
+        deletion and modification of rows, which support active
+        status and CreatAndGo, destroy operation.
+        To create a new row, hh3cMplsPsGroupID, hh3cMplsPsWorkLspName,
+        hh3cMplsPsProtectLspName, hh3cMplsPsRevertiveMode, hh3cMplsPsWTR
+        and hh3cMplsPsHoldOff must be specified."
+    ::= { hh3cMplsPsEntry 14 }
+
+hh3cMplsOamPsNotifications OBJECT IDENTIFIER ::= { hh3cMplsOamPs 3 }
+
+hh3cMplsPsSwitchPtoW NOTIFICATION-TYPE
+    OBJECTS
+        {
+            hh3cMplsPsWorkLspName,
+            hh3cMplsPsProtectLspName,
+            hh3cMplsPsSwitchResult
+        }
+    STATUS      current
+    DESCRIPTION
+        "This notification is generated when switching from
+        protection-lsp to working-lsp occured."
+    ::= { hh3cMplsOamPsNotifications 1 }
+
+hh3cMplsPsSwitchWtoP NOTIFICATION-TYPE
+    OBJECTS
+        {
+            hh3cMplsPsWorkLspName,
+            hh3cMplsPsProtectLspName,
+            hh3cMplsPsSwitchResult
+        }
+    STATUS      current
+    DESCRIPTION
+        "This notification is generated when switching from woking-lsp
+        to protection-lsp occured."
+    ::= { hh3cMplsOamPsNotifications 2 }
+
+END