Initial commitHEADmain

1 files changed, 434 insertions, 0 deletions

diff --git a/MIBS/comware/HH3C-L4RDT-MIB b/MIBS/comware/HH3C-L4RDT-MIB
new file mode 100644
index 0000000..70d19d8
--- /dev/null
+++ b/MIBS/comware/HH3C-L4RDT-MIB
@@ -0,0 +1,434 @@
+-- **********************************************************************
+-- Copyright (C) 2004 New H3C Tech. Co., Ltd. All rights reserved.
+-- **********************************************************************
+--
+-- Name:          Layer 4 Redirection MIB
+--
+-- Description:
+--
+-- This MIB is used to configure the redirection of network traffic to a
+-- network appliance.  It is to be used for switches that are Layer 4
+-- capable.  It is divided into 3 tables and 4 scalar objects:
+-- the Cache table, the IP Exclusion Table, the Redirect VLAN table,
+-- the Information String object, the Free Cache Entries object,
+-- the Free IP Exclusion Entries object, and the Free Redirect VLAN
+-- Entries object.
+--
+-- The Cache table is responsible for storing the information
+-- about each cache to which network traffic is potentially being
+-- redirected.  This table includes the cache IP address, the status
+-- of redirection, the cache port, the cache VLAN, and TCP port
+-- information.
+--
+-- The IP Exclusion table is responsible for storing the IP information
+-- on any IP addresses/subnetworks that are NOT allowed to be redirected.
+--
+-- The Redirect VLAN table is responsible for storing the VLAN ID of
+-- the packet which need to be redirected to the Web cache.
+--
+-- The Information String object is responsible for storing a string.  This
+-- string will contain information pertaining to configuring Layer 4
+-- Redirection (success or failure).
+--
+-- The Free Cache Entries object is responsible for storing the number
+-- of entries that may still be added to the Cache Table.
+--
+-- The Free IP Exclusion Entries object is responsible for storing the
+-- number of entries that may still be added to the IP Exclusion Table.
+--
+-- The Free Redirect VLAN Entries object is responsible for storing the
+-- number of entries that may still be added to the Redirect VLAN Table.
+--
+-- History V2.0
+--
+-- V1.00     4/23/04     Created.
+-- V2.0 2004-10-12 updated by gaolong
+--      Add hh3cL4Redirect MODULE-IDENTITY clause.
+--      Change ACCESS clause to MAX-ACCESS
+--      Change value of STATUS from mandatory to current
+-- **********************************************************************
+
+HH3C-L4RDT-MIB DEFINITIONS ::= BEGIN
+
+        IMPORTS
+            OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP
+                FROM SNMPv2-CONF
+            Integer32, Gauge32, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE
+                FROM SNMPv2-SMI
+            DisplayString, RowStatus,TruthValue,MacAddress,TEXTUAL-CONVENTION
+                FROM SNMPv2-TC
+            hh3cCommon
+                FROM HH3C-OID-MIB;
+
+    hh3cL4Redirect    MODULE-IDENTITY
+            LAST-UPDATED "200409210000Z"        -- Sept 21, 2002 at 00:00 GMT
+            ORGANIZATION
+                "New H3C Tech. Co., Ltd."
+            CONTACT-INFO
+                "Platform Team New H3C Tech. Co., Ltd.
+                Hai-Dian District Beijing P.R. China
+                http://www.h3c.com
+                Zip:100085
+                "
+            DESCRIPTION
+                "See description above"
+            ::= { hh3cCommon 10 }
+
+
+
+-- This table should be supported by devices that support Web Cache
+-- Redirection.
+hh3cL4RedirectCacheTable OBJECT-TYPE
+      SYNTAX      SEQUENCE OF Hh3cL4RedirectCacheEntry
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION "This table contains an entry for each Web Cache
+        device that this unit is aware of."
+      ::= { hh3cL4Redirect 1 }
+
+hh3cL4RedirectCacheEntry OBJECT-TYPE
+      SYNTAX      Hh3cL4RedirectCacheEntry
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION "Each row specifies a known Web Cache device."
+      INDEX       { hh3cL4RedirectCacheIpAddress }
+      ::= { hh3cL4RedirectCacheTable 1 }
+
+Hh3cL4RedirectCacheEntry ::= SEQUENCE {
+                  hh3cL4RedirectCacheIpAddress                  IpAddress,
+                  hh3cL4RedirectCacheRedirectionStatus          INTEGER,
+                  hh3cL4RedirectCachePort                       INTEGER,
+                  hh3cL4RedirectCacheRowStatus                  RowStatus,
+                  hh3cL4RedirectCacheMacAddress                 MacAddress,
+                  hh3cL4RedirectCacheVlan                       INTEGER,
+                  hh3cL4RedirectCacheTcpPort                    INTEGER
+                  }
+
+hh3cL4RedirectCacheIpAddress OBJECT-TYPE
+      SYNTAX      IpAddress
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION "This object specifies the IP address of the Web
+        Cache device."
+      ::= { hh3cL4RedirectCacheEntry 1 }
+
+hh3cL4RedirectCacheRedirectionStatus OBJECT-TYPE
+      SYNTAX      INTEGER  {
+                  disabledNotRedirecting (1),
+                  enabledNoHealthChecker (2),
+                  enabledHealthChecking (3),
+                  enabledHealthCheckOKNotRedirecting (4),
+                  enabledHealthCheckFailed (5),
+                  enabledRedirecting (6)
+      }
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION "This object returns the current state of traffic
+        redirection to the cache.
+
+        If redirection is disabled, this object shall return
+        disabledNotRedirecting(1).
+
+        If a unit cannot be selected to perform the cache health check,
+        this object shall return enabledNoHealthChecker(2).
+
+        If the software is determining if the cache is able to do
+        redirection(this will happen when the redirection state
+        transitions from disabled to enabled), this object shall return
+        enabledHealthChecking(3).
+
+        If the cache health check succeeded but the hardware is unable
+        to support redirection to the cache port, this object shall
+        return enabledHealthCheckOKNotRedirecting(4).
+
+        If the latest health check of the cache has failed, this object
+        shall return enabledHealthCheckFailed(5).
+
+        If the cache is in use and traffic is being redirected to it,
+        this object shall return enabledRedirecting(6).
+
+        The default value is disabledNotRedirecting(1)."
+      ::= { hh3cL4RedirectCacheEntry 2 }
+
+hh3cL4RedirectCachePort OBJECT-TYPE
+      SYNTAX      INTEGER
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION "This object stores the ifIndex that identifies the
+        port or link aggregation which provides the connection that
+        leads to the cache.  If only manual cache configuration is
+        supported, this value must be supplied. The method of cache
+        configuration can be ascertained by the presence or absence
+        of the L4 manual cache configuration id within the
+        3com-352 MIB.
+
+        The default value is 0."
+      ::= { hh3cL4RedirectCacheEntry 3 }
+
+hh3cL4RedirectCacheRowStatus OBJECT-TYPE
+      SYNTAX      RowStatus
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION "This object is used to create and remove Web Cache
+        entries.
+
+        The following are the valid values that may be written to
+        RowStatus:
+
+        Writing createAndGo(4) to the RowStatus of a non-existent row
+        shall create a row with default values and shall set the row to
+        active(1).  If the row already exists, it shall be an error.
+
+        Writing createAndWait(5) to the RowStatus of a non-existent row
+        shall create a row with default values and shall set the row to
+        notInService(2).  If the row already exists, it shall be an
+        error.
+
+        Writing active(1) to the RowStatus of an existing row shall
+        change the value of that row to active(1). Writing active(1) to
+        the RowStatus of an existing row that is already active(1)
+        shall not cause an error, the row shall remain active(1).  If
+        the row does not exist, it shall be an error.
+
+        Writing notInService(2) to the RowStatus of an existing row
+        shall change the value of that row to notInService(2).  Writing
+        notInService(2) to the RowStatus of an existing row that is
+        already notInService(2) shall not cause an error, the row shall
+        remain notInService(2).  If the row does not exist, it shall be
+        an error.
+
+        Writing destroy(6) to the RowStatus of a non-existent row shall
+        be an error.  If the row exists, it shall be removed.
+
+        Writing notReady(3) to the RowStatus of a non-existent row or
+        to an existent row shall be an error.
+
+        If the user does not supply values for the necessary objects,
+        default values will be supplied.
+
+        Attempts to create more entries than the hardware can support
+        shall be rejected."
+      ::= { hh3cL4RedirectCacheEntry 4 }
+
+hh3cL4RedirectCacheMacAddress OBJECT-TYPE
+      SYNTAX      MacAddress
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION "This object defines the MAC address of the attached
+                   Web cache device.  If only manual configuration of
+                   the cache is supported, this value must be
+                   supplied. The method of cache configuration can be
+                   ascertained by the presence or absence of the
+                   L4 manual cache configuration id within the
+                   3com-352 MIB.
+
+                   The default value is 0."
+      ::= { hh3cL4RedirectCacheEntry 5 }
+
+hh3cL4RedirectCacheVlan OBJECT-TYPE
+      SYNTAX      INTEGER
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION "This object specifies the VLAN which the cache port belongs to."
+      ::= { hh3cL4RedirectCacheEntry 6 }
+
+hh3cL4RedirectCacheTcpPort OBJECT-TYPE
+      SYNTAX      INTEGER
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION "This object specifies the TCP port number that is being redirected "
+      ::= { hh3cL4RedirectCacheEntry 7 }
+
+
+hh3cL4RedirectIpExclusionTable OBJECT-TYPE
+      SYNTAX      SEQUENCE OF Hh3cL4RedirectIpExclusionEntry
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION "This table lists the IP addresses and subnetworks
+        that Web Cache redirection is not supported for.
+
+        Some devices may not support addition to this table."
+      ::= { hh3cL4Redirect 2 }
+
+hh3cL4RedirectIpExclusionEntry OBJECT-TYPE
+      SYNTAX      Hh3cL4RedirectIpExclusionEntry
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION "Each row contains an IP address or a IP subnetwork
+        that is being excluded from the redirection."
+      INDEX       { hh3cL4RedirectIpExclusionIpAddress }
+      ::= { hh3cL4RedirectIpExclusionTable 1 }
+
+Hh3cL4RedirectIpExclusionEntry ::= SEQUENCE {
+                  hh3cL4RedirectIpExclusionIpAddress            IpAddress,
+                  hh3cL4RedirectIpExclusionMaskLen              INTEGER,
+                  hh3cL4RedirectIpExclusionRowStatus            RowStatus
+                  }
+
+hh3cL4RedirectIpExclusionIpAddress OBJECT-TYPE
+      SYNTAX      IpAddress
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION "This object specifies the IP address or the
+        subnetwork address that is to be excluded."
+      ::= { hh3cL4RedirectIpExclusionEntry 1 }
+
+hh3cL4RedirectIpExclusionMaskLen OBJECT-TYPE
+      SYNTAX      INTEGER (1..32)
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION "This object provides the number of bits in the
+        subnetwork mask. This mask shall be applied to the excludeIP
+        address to determine the subnetwork that is to be excluded.  A
+        value of 32 implies that the excludeIP address refers to an
+        individual host.
+
+        The default value is 32."
+      ::= { hh3cL4RedirectIpExclusionEntry 2 }
+
+hh3cL4RedirectIpExclusionRowStatus OBJECT-TYPE
+      SYNTAX      RowStatus
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION "This object is used to add rows to the Exclusion
+        Table.
+
+        The following are the valid values that may be written to
+        RowStatus:
+
+        Writing createAndGo(4) to the RowStatus of a non-existent row
+        shall create a new row.  The new row shall be active(1).  If
+        the row exists, it shall be an error.
+
+        Writing createAndWait(5) to the RowStatus of a non-existent row
+        or to an existent row shall be an error.
+
+        Writing active(1) to the RowStatus of an existing row shall
+        change the value of that row to active(1). Writing active(1) to
+        the RowStatus of an existing row that is already active(1)
+        shall not cause an error, the row shall remain active(1).  If
+        the row does not exist, it shall be an error.
+
+        Writing notInService(2) to the RowStatus of an existing row
+        shall change the value of that row to notInService(2).  Writing
+        notInService(2) to the RowStatus of an existing row that is
+        already notInService(2) shall not cause an error, the row shall
+        remain notInService(2).  If the row does not exist, it shall be
+        an error.
+
+        Writing destroy(6) to the RowStatus of a non-existent row shall
+        be an error.  If the row exists, it shall be removed.
+
+        Writing notReady(3) to the RowStatus of a non-existent row or
+        to an existent row shall be an error.
+
+        Attempts to create more entries than the hardware can support
+        shall be rejected."
+      ::= { hh3cL4RedirectIpExclusionEntry 3 }
+
+hh3cL4RedirectVlanTable OBJECT-TYPE
+      SYNTAX      SEQUENCE OF Hh3cL4RedirectVlanEntry
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION "This table contains a row for each VLAN of the packet
+                 which need to be redirected to the Web cache."
+      ::= { hh3cL4Redirect 3 }
+
+hh3cL4RedirectVlanEntry OBJECT-TYPE
+      SYNTAX      Hh3cL4RedirectVlanEntry
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION "Each row specifies a VLAN of the packet which need to
+                 be redirected to the Web cache."
+      INDEX       { hh3cL4RedirectVlanID }
+      ::= { hh3cL4RedirectVlanTable 1 }
+
+Hh3cL4RedirectVlanEntry ::= SEQUENCE {
+                  hh3cL4RedirectVlanID                        INTEGER,
+                  hh3cL4RedirectVlanRowStatus                 RowStatus
+                  }
+
+hh3cL4RedirectVlanID OBJECT-TYPE
+      SYNTAX      INTEGER
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION "This object specifies the VLAN ID of the packet which
+                 need to be redirected to the Web cache."
+      ::= { hh3cL4RedirectVlanEntry 1 }
+
+hh3cL4RedirectVlanRowStatus OBJECT-TYPE
+      SYNTAX      RowStatus
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION "This object allows ports to be added and removed
+        from the table.
+
+        The following are the valid values that may be written to
+        RowStatus:
+
+        Writing createAndGo(4) to the RowStatus of a non-existent row
+        shall create a new row.  The new row shall be active(1).  If
+        the row exists, it shall be an error.
+
+        Writing createAndWait(5) to the RowStatus of a non-existent row
+        or to an existent row shall be an error.
+
+        Writing active(1) to the RowStatus of an existing row shall
+        change the value of that row to active(1). Writing active(1) to
+        the RowStatus of an existing row that is already active(1)
+        shall not cause an error, the row shall remain active(1).  If
+        the row does not exist, it shall be an error.
+
+        Writing notInService(2) to the RowStatus of a non-existent row
+        or to an existent row shall be an error.
+
+        Writing destroy(6) to the RowStatus of a non-existent row shall
+        be an error. If the row exists, it shall be removed.
+
+        Writing notReady(3) to the RowStatus of a non-existent row or
+        to an existent row shall be an error.
+
+        Attempts to create more entries than the hardware can support
+        shall be rejected."
+      ::= { hh3cL4RedirectVlanEntry 2 }
+
+hh3cL4RedirectInformationString OBJECT-TYPE
+      SYNTAX      DisplayString (SIZE(0..80))
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION "This object shall contain the string generated as a
+        result of a Layer 4 Redirection configuration.  It shall
+        contain either a string describing successful configuration or
+        a string describing unsuccessful configuration.
+
+        This length of this string shall be no longer than 80
+        characters."
+      ::= { hh3cL4Redirect 4 }
+
+hh3cL4RedirectFreeCacheEntries OBJECT-TYPE
+      SYNTAX      INTEGER
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION "This object indicates the number of entries that may
+        still be added to the hh3cL4RedirectCacheTable."
+      ::= { hh3cL4Redirect 5 }
+
+hh3cL4RedirectFreeIpExclusionEntries OBJECT-TYPE
+      SYNTAX      INTEGER
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION "This object indicates the number of entries that may
+        still be added to the hh3cL4RedirectIpExclusionTable."
+      ::= { hh3cL4Redirect 6 }
+
+hh3cL4RedirectFreeVlanEntries OBJECT-TYPE
+      SYNTAX      INTEGER
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION "This object indicates the number of entries that may
+        still be added to the hh3cL4RedirectVlanTable."
+      ::= { hh3cL4Redirect 7 }
+
+END
+
+