Initial commitHEADmain

1 files changed, 171 insertions, 0 deletions

diff --git a/MIBS/cisco/CISCOSB-BRGMACSWITCH-MIB b/MIBS/cisco/CISCOSB-BRGMACSWITCH-MIB
new file mode 100644
index 0000000..51dce37
--- /dev/null
+++ b/MIBS/cisco/CISCOSB-BRGMACSWITCH-MIB
@@ -0,0 +1,171 @@
+CISCOSB-BRGMACSWITCH-MIB DEFINITIONS ::= BEGIN
+
+-- Title:                CISCOSB ROS
+--                       Private BRIDGE MAC SWITCH MIB
+-- Version:              7.46
+-- Date:                 15-Jan-2007
+
+IMPORTS
+    switch001                                    FROM CISCOSB-MIB
+    OBJECT-TYPE, MODULE-IDENTITY                 FROM SNMPv2-SMI
+    TruthValue                                   FROM SNMPv2-TC;
+
+rlBrgMacSwitch MODULE-IDENTITY
+                LAST-UPDATED "200701020000Z"
+                ORGANIZATION "Cisco Systems, Inc."
+
+                CONTACT-INFO
+                "Postal: 170 West Tasman Drive
+                San Jose , CA 95134-1706
+                USA
+
+                
+                Website:  Cisco Small Business Support Community <http://www.cisco.com/go/smallbizsupport>"
+
+                DESCRIPTION
+                      "This private MIB module defines Switching Parameters private MIBs."
+                REVISION "200701020000Z"
+                DESCRIPTION
+                      "Initial revision."
+        ::= { switch001 50 }
+
+rlBrgMacSwVersion OBJECT-TYPE
+    SYNTAX  INTEGER
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+        "MIB's version, the current version is 2."
+    ::= { rlBrgMacSwitch 1 }
+
+rlBrgMacSwMaxTableNumber OBJECT-TYPE
+    SYNTAX  INTEGER
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+        "Maximum number of MAC Tables supported by the device."
+    ::= { rlBrgMacSwitch 2 }
+
+rlBrgMacSwDynamicTables OBJECT-TYPE
+    SYNTAX  INTEGER {
+        supported (1),
+        unsupported (2)
+    }
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+        "Specifies whether the device supports port dynamic MAC tables."
+    ::= { rlBrgMacSwitch 3 }
+
+--rlBrgMacSwTblPollingTimeout  OBJECT-TYPE
+--    SYNTAX  INTEGER
+--    MAX-ACCESS  read-write
+--    STATUS  current
+--    DESCRIPTION
+--        "The units of this MIB object is seconds."
+--    ::= { rlBrgMacSwitch 4 }
+
+rlBrgMacSwOldEntryDeleteMode  OBJECT-TYPE
+    SYNTAX  INTEGER {
+        refreshFlag (1),
+        agingFlag(2),
+        agingTime(3),
+        boundaries(4)
+    }
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+        "The method used to delete old unused entries
+         refresh_flag:
+            The high level sets a flag when it adds or updates an entry,
+            the Switch clears the flag each time, when it learns the
+            station once more.
+        aging_flag:
+            The high level clears a flag when it adds or updates an entry,
+            the Switch sets the flag each time, when it learns the station
+            once more.
+        aging_time:
+            The high level defines a timeout, the Switch sends a message
+            to the high level each time when the station doesn't send
+            messages during interval between timeout and 2*timeout.
+        Boundaries:
+            The Switch doesn't support any mechanism, and the high level
+            uses two boundaries: red and yellow. When the number of entries
+            exceeds the red boundary, the high level deletes the oldest entries."
+    ::= { rlBrgMacSwitch 5 }
+
+rlBrgMacSwSpanningTree OBJECT-TYPE
+    SYNTAX  INTEGER {
+        supported (1),
+        unsupported (2)
+    }
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+        "Specifies whether the device supports port the Spanning Tree Protocol."
+    ::= { rlBrgMacSwitch 6 }
+
+rlBrgMacSwKeyType  OBJECT-TYPE
+    SYNTAX  INTEGER {
+        macOnly (1),
+        tagAndMac(2)
+    }
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+        "Specified the used MAC Address Table kye format:
+         macOnly:
+            One global MAC Address Table per device (leaky VLANs).
+         tagAndMac:
+            MAC Address Table per each VLAN (strick VLANs)."
+    ::= { rlBrgMacSwitch 7 }
+
+rlBrgMacSwYellowBoundary  OBJECT-TYPE
+    SYNTAX  INTEGER
+    MAX-ACCESS  read-write
+    STATUS  current
+    DESCRIPTION
+        "The yellow boundary."
+    ::= { rlBrgMacSwitch 8 }
+
+rlBrgMacSwRedBoundary  OBJECT-TYPE
+    SYNTAX  INTEGER
+    MAX-ACCESS  read-write
+    STATUS  current
+    DESCRIPTION
+        "The yellow boundary."
+    ::= { rlBrgMacSwitch 9 }
+
+rlBrgMacSwTrapEnable OBJECT-TYPE
+    SYNTAX  TruthValue
+    MAX-ACCESS  read-write
+    STATUS  current
+    DESCRIPTION
+        "This variable indicates whether to create a SNMP trap
+         if adding dynamic mac failed due to full hash chain."
+    DEFVAL { false }
+    ::= { rlBrgMacSwitch 10 }
+
+rlBrgMacSwOperTrapCount  OBJECT-TYPE
+    SYNTAX  INTEGER
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+        "This variable indicates the trap counter status
+         (i.e. number of received MAC addresses since the last trap
+         sent that haven't been inserted into the hash).
+         It is relevant only when trap is enabled."
+    ::= { rlBrgMacSwitch 11 }
+
+rlBrgMacSwAdminTrapFrequency OBJECT-TYPE
+    SYNTAX  INTEGER (1 .. 86400)
+--    UNITS    "seconds"
+    MAX-ACCESS   read-write
+    STATUS   current
+    DESCRIPTION
+        "This variable indicates the minimal frequency (in seconds)
+         of sending a trap.
+         It is relevant only when trap is enabled."
+    DEFVAL { 60 }
+    ::= { rlBrgMacSwitch 12 }
+
+END