Initial commitHEADmain

1 files changed, 781 insertions, 0 deletions

diff --git a/MIBS/cisco/CISCO-VOICE-COMMON-DIAL-CONTROL-MIB b/MIBS/cisco/CISCO-VOICE-COMMON-DIAL-CONTROL-MIB
new file mode 100644
index 0000000..79d40c4
--- /dev/null
+++ b/MIBS/cisco/CISCO-VOICE-COMMON-DIAL-CONTROL-MIB
@@ -0,0 +1,781 @@
+-- *****************************************************************
+-- CISCO-VOICE-COMMON-DIAL-CONTROL-MIB.my:
+-- Voice Common Dial Control MIB file
+--   
+-- June 1999, Chris White
+--   
+-- Copyright (c) 1999, 2001, 2003, 2005-2010 by cisco Systems Inc.
+-- All rights reserved.
+-- *****************************************************************
+
+CISCO-VOICE-COMMON-DIAL-CONTROL-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY,
+    OBJECT-TYPE,
+    Unsigned32
+        FROM SNMPv2-SMI
+    MODULE-COMPLIANCE,
+    OBJECT-GROUP
+        FROM SNMPv2-CONF
+    TruthValue,
+    TEXTUAL-CONVENTION
+        FROM SNMPv2-TC
+    callActiveSetupTime,
+    callActiveIndex
+        FROM DIAL-CONTROL-MIB
+    SnmpAdminString
+        FROM SNMP-FRAMEWORK-MIB
+    cCallHistoryIndex
+        FROM CISCO-DIAL-CONTROL-MIB
+    ciscoExperiment
+        FROM CISCO-SMI;
+
+
+ciscoVoiceCommonDialControlMIB MODULE-IDENTITY
+    LAST-UPDATED    "201006300000Z"
+    ORGANIZATION    "Cisco Systems, Inc."
+    CONTACT-INFO
+            "Cisco Systems
+            Customer Service
+
+            Postal: 170 W. Tasman Drive
+            San Jose, CA  95134
+            USA
+
+            Tel: +1 800 553-NETS
+
+            E-mail: cs-voice@cisco.com"
+    DESCRIPTION
+        "This MIB module contains voice related objects that
+        are common across more than one network
+        encapsulation i.e VoIP, VoATM and VoFR.
+
+        *** ABBREVIATIONS, ACRONYMS AND SYMBOLS ***
+
+        GSM    - Global System for Mobile Communication
+
+        AMR-NB - Adaptive Multi Rate - Narrow Band
+
+        iLBC   - internet Low Bitrate Codec
+
+        iSAC   - internet Speech Audio Codec"
+    REVISION        "201006300000Z"
+    DESCRIPTION
+        "Added CvcCallReferenceIdOrZero textual convention.
+        Added aaclc and aacld enum to CvcCoderTypeRate and
+        CvcSpeechCoderRate textual conventions."
+    REVISION        "200903180000Z"
+    DESCRIPTION
+        "[1] Added acronym for iSAC codec
+        [2] Added iSAC enum to CvcSpeechCoderRate and CvcCoderTypeRate  
+            textual conventions."
+    REVISION        "200807020000Z"
+    DESCRIPTION
+        "[1] Added '-- obsolete' to description of 'g722'
+        enum from CvcCoderTypeRate.
+        [2] Added new enum values 'g722r4800', 'g722r5600'
+        and 'g722r6400' to CvcCoderTypeRate.
+        [3] Added new enum values 'g722r4800', 'g722r5600'
+        and 'g722r6400' to CvcSpeechCoderRate."
+    REVISION        "200706260000Z"
+    DESCRIPTION
+        "[1] Imported TEXTUAL-CONVENTION from SNMPv2-TC.
+        [2] Added acronyms for GSM AMR-NB and iLBC codecs
+        [3] Added llcc, gsmAmrNb, iLBC, iLBCr15200 and iLBCr13330
+            enums to CvcSpeechCoderRate textual conventions.
+        [4] Added llcc, gsmAmrNb, g722, iLBC, iLBCr15200 and iLBCr13330 
+            enums to CvcCoderTypeRate textual conventions.
+        [5] Added REFERENCE clause to CvcSpeechCoderRate and
+            CvcCoderTypeRate textual conventions for GSM AMR-NB and
+            iLBC codecs."
+    REVISION        "200508160000Z"
+    DESCRIPTION
+        "Added CvcH320CallType and CvcVideoCoderRate objects.
+        Added g722 enum to CvcCoderTypeRate textual conventions."
+    REVISION        "200503060000Z"
+    DESCRIPTION
+        "Added gsmAmrNb enum to CvcSpeechCoderRate and CvcCoderTypeRate
+        textual conventions."
+    REVISION        "200303110000Z"
+    DESCRIPTION
+        "Added new enum value 'llcc', to CvcSpeechCoderRate
+        and CvcCoderTypeRate textual-conventions."
+    REVISION        "200110060000Z"
+    DESCRIPTION
+        "[1] Added new enum value 'g726r40000',to CvcSpeechCoderRate's
+        and CvcCoderTypeRate's textual-conventions.
+        [2] Replaced 'clearch' enum with 'clearChannel' enum.
+        [3] Replaced 'codec is disabled' comment for clearChannel enum
+        with 'CLEAR channel codec'."
+    REVISION        "200109050000Z"
+    DESCRIPTION
+        "[1] Added new enum value, 'clearch,' to CvcSpeechCoderRate's
+        and CvcCoderTypeRate's textual-conventions. 
+        [2] Added new enum value, 'gr303,' to CvcInBandSignaling's
+        textual-conventions
+        [3] Modified cvCommonDcCallActiveInBandSignaling's and
+        cvCommonDcCallHistoryInBandSignaling's description
+        to indicate value is valid only for Connection Trunk calls."
+    REVISION        "200007220000Z"
+    DESCRIPTION
+        "Add new objects for handling the following features:
+        [1] Calling Name display for call active and history table.
+        [2] Caller ID Block, which indicates whether the Caller ID
+            feature is in using,  for call active and history table."
+    ::= { ciscoExperiment 55 }
+
+
+-- Voice Common Dial Control MIB objects definitions
+
+cvCommonDcMIBObjects  OBJECT IDENTIFIER
+    ::= { ciscoVoiceCommonDialControlMIB 1 }
+
+-- The Voice Common Dial Control MIB consists of the following groups
+-- [1] Voice Common Call Active Group (cvCommonDcCallActive)
+-- [2] Voice Common Call History Group (cvCommonDcCallHistory)
+
+cvCommonDcCallActive  OBJECT IDENTIFIER
+    ::= { cvCommonDcMIBObjects 1 }
+
+cvCommonDcCallHistory  OBJECT IDENTIFIER
+    ::= { cvCommonDcMIBObjects 2 }
+
+
+-- Textual Conventions
+--   
+
+--   
+
+-- Speech Coder Rate Textual Conventions
+
+CvcSpeechCoderRate ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION
+        "This object specifies the most desirable codec of
+        speech for the VoIP, VoATM or VoFR peer.
+        g729r8000      - pre-IETF G.729 8000  bps
+        g729Ar8000     - G.729 ANNEX-A 8000  bps
+        g726r16000     - G.726 16000 bps
+        g726r24000     - G.726 24000 bps
+        g726r32000     - G.726 32000 bps
+        g711ulawr64000 - G.711 u-Law 64000 bps
+        g711Alawr64000 - G.711 A-Law 64000 bps
+        g728r16000     - G.728 16000 bps
+        g723r6300      - G.723.1 6300 bps
+        g723r5300      - G.723.1 5300 bps
+        gsmr13200      - GSM Full rate 13200 bps
+        g729Br8000     - G.729 ANNEX-B 8000  bps
+        g729ABr8000    - G.729 ANNEX-A & B 8000 bps
+        g723Ar6300     - G723.1 Annex A 6300 bps              
+        g723Ar5300     - G723.1 Annex A 5300 bps               
+        g729IETFr8000  - IETF G.729 8000  bps
+        gsmeEr12200    - GSM Enhanced Full Rate 12200 bps
+        clearChannel   - CLEAR Channel codec
+        g726r40000     - G.726 40000 bps
+        llcc           - Lossless compression codec
+        gsmAmrNb       - GSM AMR-NB 4750 - 12200 bps
+        iLBC           - iILBC 13330 or 15200 bps
+        iLBCr15200     - iLBC 15200 bps
+        iLBCr13330     - iLBC 13330 bps
+        g722r4800      - G.722 (modes 1, 2, 3)
+        g722r5600      - G.722 (modes 1, 2)
+        g722r6400      - G.722 (mode 1)
+        iSAC           - iSAC (10 to 32 kbps)
+        aaclc          - AAC-LC Advanced Audio Coding Low Complexity
+        aacld          - AAC-LD MPEG-4 Low Delay Audio Coder"
+
+    REFERENCE
+        "[1] RFC 3267: For introduction about GSM AMR-NB codec,
+         section 3.1
+             [2] RFC 3952: For introduction about iLBC codec,
+         section 2"
+    SYNTAX          INTEGER  {
+                        g729r8000(1),
+                        g729Ar8000(2),
+                        g726r16000(3),
+                        g726r24000(4),
+                        g726r32000(5),
+                        g711ulawr64000(6),
+                        g711Alawr64000(7),
+                        g728r16000(8),
+                        g723r6300(9),
+                        g723r5300(10),
+                        gsmr13200(11),
+                        g729Br8000(12),
+                        g729ABr8000(13),
+                        g723Ar6300(14),
+                        g723Ar5300(15),
+                        g729IETFr8000(16),
+                        gsmeEr12200(17),
+                        clearChannel(18),
+                        g726r40000(19),
+                        llcc(20),
+                        gsmAmrNb(21),
+                        iLBC(22),
+                        iLBCr15200(23),
+                        iLBCr13330(24),
+                        g722r4800(25),
+                        g722r5600(26),
+                        g722r6400(27),
+                        iSAC(28),
+                        aaclc(29),
+                        aacld(30)
+                    }
+
+-- Fax Transmit Rate Textual Convention
+
+CvcFaxTransmitRate ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION
+        "This object specifies the default transmit rate of FAX
+        for the VoIP, VoATM or VOFR peer. If the value of this
+        object is 'none', then the Fax relay feature is disabled         
+        ; otherwise the Fax relay feature is enabled.
+
+        none      - Fax relay is disabled.
+        voiceRate - the fastest possible fax rate not exceed
+                    the configured voice rate.
+        fax2400   - 2400  bps FAX transmit rate.
+        fax4800   - 4800  bps FAX transmit rate.
+        fax7200   - 7200  bps FAX transmit rate.
+        fax9600   - 9600  bps FAX transmit rate.
+        fax14400  - 14400 bps FAX transmit rate.
+        fax12000  - 12000 bps FAX transmit rate."
+    SYNTAX          INTEGER  {
+                        none(1),
+                        voiceRate(2),
+                        fax2400(3),
+                        fax4800(4),
+                        fax7200(5),
+                        fax9600(6),
+                        fax14400(7),
+                        fax12000(8)
+                    }
+
+-- Voice/FAX Call Coder Type-Rate textual convention
+
+CvcCoderTypeRate ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION
+        "Represents the coder type-rate for voice/fax compression
+        used during a call.
+
+        *** ABBREVIATIONS, ACRONYMS AND SYMBOLS ***
+
+        GSM    - Global System for Mobile Communication
+
+        AMR-NB - Adaptive Multi Rate - Narrow Band
+
+        iLBC   - internet Low Bitrate Codec
+
+        iSAC   - internet Speech Audio Codec
+
+        other          - none of the following.
+        fax2400        - FAX   2400  bps 
+        fax4800        - FAX   4800  bps 
+        fax7200        - FAX   7200  bps 
+        fax9600        - FAX   9600  bps
+        fax14400       - FAX   14400 bps  
+        fax12000       - FAX   12000 bps  
+        g729r8000      - G.729 8000  bps (pre-IETF bit ordering)
+        g729Ar8000     - G.729 ANNEX-A 8000  bps
+        g726r16000     - G.726 16000 bps
+        g726r24000     - G.726 24000 bps
+        g726r32000     - G.726 32000 bps
+        g711ulawr64000 - G.711 u-Law 64000 bps
+        g711Alawr64000 - G.711 A-Law 64000 bps
+        g728r16000     - G.728 16000 bps
+        g723r6300      - G.723.1 6300 bps
+        g723r5300      - G.723.1 5300 bps
+        gsmr13200      - GSM full rate 13200 bps
+        g729Br8000     - G.729 ANNEX-B 8000  bps
+        g729ABr8000    - G.729 ANNEX-A & B 8000 bps
+        g723Ar6300     - G723.1 Annex A 6300 bps              
+        g723Ar5300     - G723.1 Annex A 5300 bps               
+        ietfg729r8000  - G.729 8000 bps (IETF bit ordering)
+        gsmeEr12200    - GSM Enhanced Full Rate 12200 bps
+        clearChannel   - CLEAR channel codec
+        g726r40000     - G.726 40000 bps 
+        llcc           - Lossless compression codec
+        gsmAmrNb       - GSM AMR-NB 4750 - 12200 bps
+        g722           - G.722 2400 - 6400 bps
+        iLBC           - iILBC 13330 or 15200 bps
+        iLBCr15200     - iLBC 15200 bps
+        iLBCr13330     - iLBC 13330 bps
+        g722r4800      - G.722 (modes 1, 2, 3)
+        g722r5600      - G.722 (modes 1, 2)
+        g722r6400      - G.722 (mode 1)
+        iSAC           - iSAC (10 to 32 kbps)
+        aaclc          - AAC-LC Advanced Audio Coding Low Complexity
+        aacld          - AAC-LD MPEG-4 Low Delay Audio Coder"
+
+    REFERENCE
+        "[1] RFC 3267: For introduction about GSM AMR-NB codec,
+         section 3.1
+             [2] RFC 3952: For introduction about iLBC codec,
+         section 2"
+    SYNTAX          INTEGER  {
+                        other(1),
+                        fax2400(2),
+                        fax4800(3),
+                        fax7200(4),
+                        fax9600(5),
+                        fax14400(6),
+                        fax12000(7),
+                        g729r8000(10),
+                        g729Ar8000(11),
+                        g726r16000(12),
+                        g726r24000(13),
+                        g726r32000(14),
+                        g711ulawr64000(15),
+                        g711Alawr64000(16),
+                        g728r16000(17),
+                        g723r6300(18),
+                        g723r5300(19),
+                        gsmr13200(20),
+                        g729Br8000(21),
+                        g729ABr8000(22),
+                        g723Ar6300(23),
+                        g723Ar5300(24),
+                        ietfg729r8000(25),
+                        gsmeEr12200(26),
+                        clearChannel(27),
+                        g726r40000(28),
+                        llcc(29),
+                        gsmAmrNb(30),
+                        g722(31),
+                        iLBC(32),
+                        iLBCr15200(33),
+                        iLBCr13330(34),
+                        g722r4800(35),
+                        g722r5600(36),
+                        g722r6400(37),
+                        iSAC(38),
+                        aaclc(39),
+                        aacld(40)
+                    }
+
+-- Global Call Identifier textual convention
+
+CvcGUid ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION
+        "Represents a Global Call Identifier.
+        The global call identifier is used as an unique identifier
+        for an end-to-end call.
+        A zero length CvcGUid indicates no value for the global call
+        identifier."
+    SYNTAX          OCTET STRING (SIZE (0..16))
+
+-- InBand Signaling textual conventions
+
+CvcInBandSignaling ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION
+        "Represents the type of in-band signaling used between
+        the two end points of the call and is used to inform the
+        router how interpret the ABCD signaling data bits passed
+        as part of the voice payload data.
+
+        cas         - specifies interpret the signaling bits as
+                      North American Channel Associated signaling.        
+        none        - specifies no in-band signaling or signaling
+                      is being done via an external method (e.g
+                      CCS).
+        cept        - specifies interpret the signaling bits as
+                      MELCAS
+        transparent - specifies do not interpret or translate the
+                      signaling bits.
+        gr303       - specifies interpret the signaling bits as
+                      GR303"
+    SYNTAX          INTEGER  {
+                        cas(1),
+                        none(2),
+                        cept(3),
+                        transparent(4),
+                        gr303(5)
+                    }
+
+-- Call Reference Identifier textual convention
+
+CvcCallReferenceIdOrZero ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION
+        "A call reference ID correlates the video and audio call entries
+        that belong to the same endpoint.  In other words, if an audio
+        call entry and a video call entry have the same call reference
+        ID, these entries belong to the same endpoint.  
+        Because an audio-only endpoint creates only one call entry, call
+        reference ID is not necessary and is set to zero.
+        A call reference ID with value greater than zero signifies a
+        video call, the value zero is object-specific and must therefore
+        be defined as part of the description of any object which uses
+        this syntax.  Examples of the usage of zero include audio calls."
+    SYNTAX          Unsigned32
+
+-- Voice Call H.320 Call Type textual convention
+
+CvcH320CallType ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION
+        "This object specifies the H320 call type of a voice call."
+    SYNTAX          INTEGER  {
+                        none(0), -- none of the following
+                        primary(1), -- h320 primary call
+                        secondary(2) -- h320 secondary call                        
+                    }
+
+-- Voice Call Coder Type-Rate textual convention
+
+CvcVideoCoderRate ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION
+        "This object specifies the encoding type used to compress
+        the video data of the voice call."
+    SYNTAX          INTEGER  {
+                        none(0), -- none of the following
+                        h261(1),
+                        h263(2),
+                        h263plus(3),
+                        h264(4)
+                    }
+-- **********************************************************************
+-- Voice Common Call Active Group
+-- **********************************************************************
+--   
+
+-- Voice Common Call Active Table
+
+cvCommonDcCallActiveTable OBJECT-TYPE
+    SYNTAX          SEQUENCE OF CvCommonDcCallActiveEntry 
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "This table is a common extension to the call active
+        table of IETF Dial Control MIB. It contains common call 
+        leg information about a network call leg."
+    ::= { cvCommonDcCallActive 1 }
+
+cvCommonDcCallActiveEntry OBJECT-TYPE
+    SYNTAX          CvCommonDcCallActiveEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "The common information regarding a single network call
+        leg. The call leg entry is identified by using the same 
+        index objects that are used by Call Active table of IETF 
+        Dial Control MIB to identify the call.
+        An entry of this table is created when its associated 
+        call active entry in the IETF Dial Control MIB is created
+        and the call active entry contains information for the 
+        call establishment to a network dialpeer.             
+        The entry is deleted when its associated call active entry 
+        in the IETF Dial Control MIB is deleted."
+    INDEX           {
+                        callActiveSetupTime,
+                        callActiveIndex
+                    } 
+    ::= { cvCommonDcCallActiveTable 1 }
+
+CvCommonDcCallActiveEntry ::= SEQUENCE {
+        cvCommonDcCallActiveConnectionId    CvcGUid,
+        cvCommonDcCallActiveVADEnable       TruthValue,
+        cvCommonDcCallActiveCoderTypeRate   CvcCoderTypeRate,
+        cvCommonDcCallActiveCodecBytes      INTEGER,
+        cvCommonDcCallActiveInBandSignaling CvcInBandSignaling,
+        cvCommonDcCallActiveCallingName     SnmpAdminString,
+        cvCommonDcCallActiveCallerIDBlock   TruthValue
+}
+
+cvCommonDcCallActiveConnectionId OBJECT-TYPE
+    SYNTAX          CvcGUid
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The global call identifier for the network call." 
+    ::= { cvCommonDcCallActiveEntry 1 }
+
+cvCommonDcCallActiveVADEnable OBJECT-TYPE
+    SYNTAX          TruthValue
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The object indicates whether or not the VAD (Voice
+        Activity Detection) is enabled for the voice call." 
+    ::= { cvCommonDcCallActiveEntry 2 }
+
+cvCommonDcCallActiveCoderTypeRate OBJECT-TYPE
+    SYNTAX          CvcCoderTypeRate
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The negotiated coder rate. It specifies the transmit
+        rate of voice/fax compression to its associated call leg 
+        for the call.
+        This rate is different from the configuration rate 
+        because of rate negotiation during the call." 
+    ::= { cvCommonDcCallActiveEntry 3 }
+
+cvCommonDcCallActiveCodecBytes OBJECT-TYPE
+    SYNTAX          INTEGER (10..255)
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "Specifies the payload size of the voice packet." 
+    ::= { cvCommonDcCallActiveEntry 4 }
+
+cvCommonDcCallActiveInBandSignaling OBJECT-TYPE
+    SYNTAX          CvcInBandSignaling
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "Specifies the type of in-band signaling being used on
+        the call.  This object is instantiated only for 
+        Connection Trunk calls." 
+    ::= { cvCommonDcCallActiveEntry 5 }
+
+cvCommonDcCallActiveCallingName OBJECT-TYPE
+    SYNTAX          SnmpAdminString (SIZE  (0..64))
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The calling party name this call is connected to. If the
+        name is not available, then it will have a length of zero." 
+    ::= { cvCommonDcCallActiveEntry 6 }
+
+cvCommonDcCallActiveCallerIDBlock OBJECT-TYPE
+    SYNTAX          TruthValue
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The object indicates whether or not the caller ID feature
+        is blocked for this voice call." 
+    ::= { cvCommonDcCallActiveEntry 7 }
+ 
+
+-- ****************************************************************************
+-- Voice Common Call History Group
+-- ****************************************************************************
+--   
+
+-- Voice Common Call History Table
+
+cvCommonDcCallHistoryTable OBJECT-TYPE
+    SYNTAX          SEQUENCE OF CvCommonDcCallHistoryEntry 
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "This table is the Common extension to the call history
+        table of IETF Dial Control MIB. It contains Common call 
+        leg information about a network call leg."
+    ::= { cvCommonDcCallHistory 1 }
+
+cvCommonDcCallHistoryEntry OBJECT-TYPE
+    SYNTAX          CvCommonDcCallHistoryEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "The common information regarding a single network call
+        leg. The call leg entry is identified by using the same 
+        index objects that are used by Call Active table of IETF 
+        Dial Control MIB to identify the call.
+        An entry of this table is created when its associated 
+        call history entry in the IETF Dial Control MIB is 
+        created and the call history entry contains information 
+        for the call establishment to a network dialpeer.
+        The entry is deleted when its associated call history 
+        entry in the IETF Dial Control MIB is deleted."
+    INDEX           { cCallHistoryIndex } 
+    ::= { cvCommonDcCallHistoryTable 1 }
+
+CvCommonDcCallHistoryEntry ::= SEQUENCE {
+        cvCommonDcCallHistoryConnectionId    CvcGUid,
+        cvCommonDcCallHistoryVADEnable       TruthValue,
+        cvCommonDcCallHistoryCoderTypeRate   CvcCoderTypeRate,
+        cvCommonDcCallHistoryCodecBytes      INTEGER,
+        cvCommonDcCallHistoryInBandSignaling CvcInBandSignaling,
+        cvCommonDcCallHistoryCallingName     SnmpAdminString,
+        cvCommonDcCallHistoryCallerIDBlock   TruthValue
+}
+
+cvCommonDcCallHistoryConnectionId OBJECT-TYPE
+    SYNTAX          CvcGUid
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The global call identifier for the gateway call." 
+    ::= { cvCommonDcCallHistoryEntry 1 }
+
+cvCommonDcCallHistoryVADEnable OBJECT-TYPE
+    SYNTAX          TruthValue
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The object indicates whether or not the VAD (Voice
+        Activity Detection) was enabled for the voice call." 
+    ::= { cvCommonDcCallHistoryEntry 2 }
+
+cvCommonDcCallHistoryCoderTypeRate OBJECT-TYPE
+    SYNTAX          CvcCoderTypeRate
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The negotiated coder rate. It specifies the transmit rate
+        of voice/fax compression to its associated call leg for 
+        the call.
+        This rate is different from the configuration rate 
+        because of rate negotiation during the call." 
+    ::= { cvCommonDcCallHistoryEntry 3 }
+
+cvCommonDcCallHistoryCodecBytes OBJECT-TYPE
+    SYNTAX          INTEGER (10..255)
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "Specifies the payload size of the voice packet." 
+    ::= { cvCommonDcCallHistoryEntry 4 }
+
+cvCommonDcCallHistoryInBandSignaling OBJECT-TYPE
+    SYNTAX          CvcInBandSignaling
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "Specifies the type of in-band signaling used on the
+        call.  This object is instantiated only for 
+        Connection Trunk calls." 
+    ::= { cvCommonDcCallHistoryEntry 5 }
+
+cvCommonDcCallHistoryCallingName OBJECT-TYPE
+    SYNTAX          SnmpAdminString (SIZE  (0..64))
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The calling party name this call is connected to. If
+        the name is not available, then it will have a length 
+        of zero." 
+    ::= { cvCommonDcCallHistoryEntry 6 }
+
+cvCommonDcCallHistoryCallerIDBlock OBJECT-TYPE
+    SYNTAX          TruthValue
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The object indicates whether or not the caller ID
+        feature is blocked for this voice call." 
+    ::= { cvCommonDcCallHistoryEntry 7 }
+ 
+
+-- **********************************************************************
+-- Notifications
+-- **********************************************************************
+
+cvCommonDcMIBNotificationPrefix  OBJECT IDENTIFIER
+    ::= { ciscoVoiceCommonDialControlMIB 2 }
+
+cvCommonDcMIBNotifications  OBJECT IDENTIFIER
+    ::= { cvCommonDcMIBNotificationPrefix 0 }
+
+cvCommonDcMIBConformance  OBJECT IDENTIFIER
+    ::= { ciscoVoiceCommonDialControlMIB 3 }
+
+cvCommonDcMIBCompliances  OBJECT IDENTIFIER
+    ::= { cvCommonDcMIBConformance 1 }
+
+cvCommonDcMIBGroups  OBJECT IDENTIFIER
+    ::= { cvCommonDcMIBConformance 2 }
+
+
+-- **********************************************************************
+-- Compliance statements
+-- **********************************************************************
+
+cvCommonDcMIBCompliance MODULE-COMPLIANCE
+    STATUS          deprecated
+    DESCRIPTION
+        "The compliance statement for entities which
+        implement the CISCO VOICE COMMON MIB"
+    MODULE          -- this module
+    MANDATORY-GROUPS { cvCommonDcCallGroup }
+    ::= { cvCommonDcMIBCompliances 1 }
+
+cvCommonDcMIBComplianceRev1 MODULE-COMPLIANCE
+    STATUS          current
+    DESCRIPTION
+        "The compliance statement for entities which
+        implement the CISCO VOICE COMMON MIB"
+    MODULE          -- this module
+    MANDATORY-GROUPS { cvCommonDcCallGroup1 }
+
+    OBJECT          cvCommonDcCallActiveCallingName
+    SYNTAX          SnmpAdminString (SIZE (0..64))
+    DESCRIPTION
+        "Support is required only for the subset of
+        SnmpAdminString values which contain ASCII characters.  
+        In effect, a minimal implementation implements this 
+        object as a DisplayString."
+
+    OBJECT          cvCommonDcCallHistoryCallingName
+    SYNTAX          SnmpAdminString (SIZE (0..64))
+    DESCRIPTION
+        "Support is required only for the subset of
+        SnmpAdminString values which contain ASCII characters.  
+        In effect, a minimal implementation implements this 
+        object as a DisplayString."
+    ::= { cvCommonDcMIBCompliances 2 }
+
+-- units of conformance
+
+cvCommonDcCallGroup OBJECT-GROUP
+    OBJECTS         {
+                        cvCommonDcCallActiveConnectionId,
+                        cvCommonDcCallActiveVADEnable,
+                        cvCommonDcCallActiveCoderTypeRate,
+                        cvCommonDcCallActiveCodecBytes,
+                        cvCommonDcCallActiveInBandSignaling,
+                        cvCommonDcCallHistoryConnectionId,
+                        cvCommonDcCallHistoryVADEnable,
+                        cvCommonDcCallHistoryCoderTypeRate,
+                        cvCommonDcCallHistoryCodecBytes,
+                        cvCommonDcCallHistoryInBandSignaling
+                    }
+    STATUS          deprecated
+    DESCRIPTION
+        "A collection of objects providing the common network
+        call leg information."
+    ::= { cvCommonDcMIBGroups 1 }
+
+cvCommonDcCallGroup1 OBJECT-GROUP
+    OBJECTS         {
+                        cvCommonDcCallActiveConnectionId,
+                        cvCommonDcCallActiveVADEnable,
+                        cvCommonDcCallActiveCoderTypeRate,
+                        cvCommonDcCallActiveCodecBytes,
+                        cvCommonDcCallActiveInBandSignaling,
+                        cvCommonDcCallActiveCallingName,
+                        cvCommonDcCallActiveCallerIDBlock,
+                        cvCommonDcCallHistoryConnectionId,
+                        cvCommonDcCallHistoryVADEnable,
+                        cvCommonDcCallHistoryCoderTypeRate,
+                        cvCommonDcCallHistoryCodecBytes,
+                        cvCommonDcCallHistoryInBandSignaling,
+                        cvCommonDcCallHistoryCallingName,
+                        cvCommonDcCallHistoryCallerIDBlock
+                    }
+    STATUS          current
+    DESCRIPTION
+        "A collection of objects providing the common network
+        call leg information."
+    ::= { cvCommonDcMIBGroups 2 }
+
+END
+
+
+
+
+
+
+
+
+
+