Initial commitHEADmain

1 files changed, 2022 insertions, 0 deletions

diff --git a/MIBS/cisco/CISCO-QOS-PIB-MIB b/MIBS/cisco/CISCO-QOS-PIB-MIB
new file mode 100644
index 0000000..bdf7d0b
--- /dev/null
+++ b/MIBS/cisco/CISCO-QOS-PIB-MIB
@@ -0,0 +1,2022 @@
+CISCO-QOS-PIB-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY,
+    OBJECT-TYPE,
+    Counter64,
+    Unsigned32,
+    IpAddress
+        FROM SNMPv2-SMI
+
+    MODULE-COMPLIANCE,
+    OBJECT-GROUP
+        FROM SNMPv2-CONF
+
+    TEXTUAL-CONVENTION,
+    DisplayString,
+    MacAddress,
+    TruthValue
+        FROM SNMPv2-TC
+
+
+    ciscoPibToMib
+        FROM CISCO-SMI
+    ;
+
+ciscoQosPIBMIB MODULE-IDENTITY
+    LAST-UPDATED "200708290000Z"
+    ORGANIZATION "Cisco Systems Inc."
+    CONTACT-INFO
+        "Cisco Systems
+        Customer Service
+
+        Postal: 170 W Tasman Drive
+            San Jose, CA 95134
+            USA
+
+        Tel: +1 800 553-NETS
+
+        E-mail: cs-wbu@cisco.com"
+    DESCRIPTION
+            "The Cisco QOS Policy PIB for provisioning QOS policy."
+    REVISION    "200708290000Z"
+    DESCRIPTION
+            "Add new enum values in QosInterfaceQueueType
+             textual convention for various queue type."
+    REVISION    "200405030000Z"
+    DESCRIPTION
+            "Add new enum value in QosInterfaceQueueType
+             textual convention for 1p3q8t queue type."
+    REVISION    "200302210000Z"
+    DESCRIPTION
+            "Add new enum values in QosInterfaceQueueType
+             textual convention to indicate queue types
+             containing priority queue. Add new enum value
+             in ThresholdSetRange textual convention for
+             zero threshold."
+    REVISION    "200205020000Z"
+    DESCRIPTION
+            "Fix the SYNTAX of Role and RoleCombination."
+    REVISION    "200006160000Z"
+    DESCRIPTION
+            "Added QosInterfaceTypeCapabilities textual convention."
+    REVISION    "200005110000Z"
+    DESCRIPTION
+            "Initial version of this PIB module."
+    ::= { ciscoPibToMib 1 }
+
+-- New textual conventions
+--
+
+-- DiffServ Codepoint
+--
+Dscp ::= TEXTUAL-CONVENTION
+    STATUS current
+    DESCRIPTION
+        "An integer that is in the range of the DiffServ codepoint
+        values."
+    SYNTAX INTEGER (0..63)
+
+-- Layer 2 CoS
+--
+QosLayer2Cos ::= TEXTUAL-CONVENTION
+    STATUS current
+    DESCRIPTION
+        "An integer that is in the range of the layer 2 CoS values.
+        This corresponds to the 802.1p and ISL CoS values."
+    SYNTAX INTEGER (0..7)
+
+-- Supported Queues
+--
+QueueRange ::= TEXTUAL-CONVENTION
+    STATUS current
+    DESCRIPTION
+        "An integer that is limited to the number of queues per
+        interface supported by the PIB.  Limited to 64 which is the
+        number of codepoints."
+    SYNTAX INTEGER {
+        oneQ(1), twoQ(2), threeQ(3), fourQ(4),
+        eightQ(8), sixteenQ(16), thirtyTwoQ(32), sixtyFourQ(64)
+        }
+
+-- Supported Thresholds
+--
+ThresholdSetRange ::= TEXTUAL-CONVENTION
+    STATUS current
+    DESCRIPTION
+        "An integer that is limited to the number of threshold sets
+        per queue supported by the PIB. A threshold set is a
+        collection of parameters describing queue threshold.  The
+        parameters of a threshold set depend on the drop mechanism the
+        queue implements.  For example, the threshold set for
+        tail-drop  comprises a single parameter, the percentage of
+        queue size at which dropping occurs.  The threshold set for
+        WRED comprises two parameters; within the range of the two
+        parameters packets are randomly dropped."
+    SYNTAX INTEGER {
+        zeroT(0), oneT(1), twoT(2), fourT(4), eightT(8)
+        }
+
+-- Percentage for thresholds, etc.
+--
+Percent ::= TEXTUAL-CONVENTION
+    STATUS current
+    DESCRIPTION
+        "An integer that is in the range of a percent value."
+    SYNTAX INTEGER (0..100)
+
+-- Interface types
+--
+QosInterfaceQueueType ::= TEXTUAL-CONVENTION
+    STATUS current
+    DESCRIPTION
+        "An enumerated type for all the known interface types.  The
+        interface types are currently limited to a predefined
+        combination of queues and thresholds such that the product of
+        queues and thresholds does not exceed 64 (i.e., the total
+        number of DSCPs."
+    SYNTAX INTEGER {
+        oneQ1t(1),      oneQ2t(2),      oneQ4t(3),       oneQ8t(4),
+        twoQ1t(5),      twoQ2t(6),      twoQ4t(7),       twoQ8t(8),
+        threeQ1t(9),    threeQ2t(10),   threeQ4t(11),    threeQ8t(12),
+        fourQ1t(13),    fourQ2t(14),    fourQ4t(15),     fourQ8t(16),
+        eightQ1t(17),   eightQ2t(18),   eightQ4t(19),    eightQ8t(20),
+        sixteenQ1t(21), sixteenQ2t(22), sixteenQ4t(23),
+        sixtyfourQ1t(24), sixtyfourQ2t(25), sixtyfourQ4t(26),
+        oneP1Q0t(27),   oneP1Q4t(28),   oneP1Q8t(29),    oneP2Q1t(30),
+        oneP2Q2t(31),   oneP3Q1t(32),   oneP7Q8t(33),    oneP3Q8t(34),
+        sixteenQ8t(35), oneP15Q8t(36),  oneP15Q1t(37),   oneP7Q1t(38),
+        oneP31Q1t(39),  thirtytwoQ1t(40), thirtytwoQ8t(41),
+        oneP31Q8t(42),  oneP7Q4t(43),   oneP3Q4t(44),    oneP7Q2t(45) 
+    }
+
+QosInterfaceTypeCapabilities ::= TEXTUAL-CONVENTION
+    STATUS current
+    DESCRIPTION
+        "An enumeration of interface capabilities.  Used by the PDP to
+        select policies and configuration to push to the PEP."
+    SYNTAX BITS {
+        unspecified (0),
+
+        -- Classification support
+        inputL2Classification (1), inputIpClassification (2),
+        outputL2Classification (3), outputIpClassification (4),
+        inputPortClassification (19), outputPortClassification (20),
+
+        -- Policing support
+        inputUflowPolicing (5), inputAggregatePolicing (6),
+        outputUflowPolicing (7), outputAggregatePolicing (8),
+        policeByMarkingDown (9), policeByDropping (10),
+        inputUflowShaping (21), inputAggregateShaping (22),
+        outputUflowShaping (23), outputAggregateShaping (24),
+
+        -- Supported scheduling mechanisms
+        fifo (11), wrr (12), wfq (13), cq (14), pq (15), cbwfq (16),
+        pqWrr (25), pqCbwfq (26),
+
+        -- Supported congestion control mechanisms
+        tailDrop (17), wred (18)
+  }
+
+-- Role
+--
+-- This TC is commented out since it is not actually used in this
+-- PIB.  Nevertheless, the size and character restrictions must still
+-- be enforced
+--
+-- Role ::= TEXTUAL-CONVENTION
+--     STATUS current
+--     DESCRIPTION
+--         "A display string where valid letters are a-z, A-Z, 0-9,
+--         ., - and _.  Name can not start with an '_'.
+--     SYNTAX OCTET STRING (SIZE (1..31))
+
+-- Role Combination
+--
+RoleCombination ::= TEXTUAL-CONVENTION
+    STATUS current
+    DESCRIPTION
+        "A Display string consisting of a set of roles concatenated
+        with a '+' character where the roles are in lexicographic
+        order from minimum to maximum."
+    SYNTAX OCTET STRING (SIZE (0..255))
+
+-- Policy Instance Index
+--
+PolicyInstanceId ::= TEXTUAL-CONVENTION
+    STATUS current
+    DESCRIPTION
+        "A textual convention for an attribute that is an an
+        unsigned integer index attribute of class.  It is used for
+        attributes that exist for the purpose of providing an integer
+        index of an instance.
+
+        For any integer index that refers to another policy instance,
+        that other policy instance must exist. Furthermore, it is an
+        error to try to delete a policy instance that is referred to by
+        another instance without first deleting the referring
+        instance."
+    SYNTAX Unsigned32
+
+-- Unsigned 64 bit integer
+--
+Unsigned64 ::= TEXTUAL-CONVENTION
+    STATUS current
+    DESCRIPTION
+        "An unsigned 64 bit integer. We use SYNTAX Counter64 for the
+        enconding rules."
+    SYNTAX Counter64
+
+--
+-- Object identifier for conformance statements
+--
+
+qosPIBConformance  OBJECT IDENTIFIER ::= { ciscoQosPIBMIB 1 }
+
+--
+-- Device Config.
+--
+
+-- This group contains device configuration information.  This
+-- configuration is either set by management or reflects the physical
+-- configuration of the device.  This configuration is generally
+-- reported to the PDP (i.e., the policy server so that the PDP can
+-- determine what policies to download to the PEP (i.e., the device).
+
+qosDeviceConfig OBJECT IDENTIFIER ::= { ciscoQosPIBMIB 2 }
+
+qosDevicePibIncarnationTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF QosDevicePibIncarnationEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "This class contains a single policy instance that identifies
+        the current incarnation of the PIB and the PDP that installed
+        this incarnation.  The instance of this class is reported to
+        the PDP at client connect time so that the PDP can (attempt
+        to) ascertain the current state of the PIB."
+    ::= { qosDeviceConfig 1 }
+
+qosDevicePibIncarnationEntry OBJECT-TYPE
+    SYNTAX QosDevicePibIncarnationEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "The single policy instance of this class identifies the
+        current incarnation of the PIB and the PDP that installed
+        this incarnation."
+    INDEX { qosDeviceIncarnationId }
+    ::= { qosDevicePibIncarnationTable 1 }
+
+QosDevicePibIncarnationEntry ::= SEQUENCE {
+        qosDeviceIncarnationId   PolicyInstanceId,
+        qosDevicePdpName         DisplayString,
+        qosDevicePibIncarnation  OCTET STRING,
+        qosDevicePibTtl          Unsigned32
+    }
+
+qosDeviceIncarnationId OBJECT-TYPE
+    SYNTAX PolicyInstanceId
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "An integer index to identify the instance of the policy class."
+    ::= { qosDevicePibIncarnationEntry 1 }
+
+qosDevicePdpName OBJECT-TYPE
+    SYNTAX DisplayString
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The name of the PDP that installed the current incarnation of
+        the PIB into the device.  By default it is the zero length
+        string."
+        ::= { qosDevicePibIncarnationEntry 2 }
+
+qosDevicePibIncarnation OBJECT-TYPE
+    SYNTAX OCTET STRING (SIZE (128))
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "An octet string to identify the current incarnation.  It has
+        meaning to the PDP that installed the PIB and perhaps its
+        standby PDPs. By default the empty string."
+        ::= { qosDevicePibIncarnationEntry 3 }
+
+qosDevicePibTtl OBJECT-TYPE
+    SYNTAX Unsigned32
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The number of seconds after a client close or TCP timeout for
+        which the PEP continues to enforce the policy in the PIB.
+        After this interval, the PIB is consired expired and the
+        device no longer enforces the policy installed in the PIB."
+        ::= { qosDevicePibIncarnationEntry 4 }
+
+qosDeviceAttributeTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF QosDeviceAttributeEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "The single instance of this class indicates specific
+        attributes of the device.  These include configuration values
+        such as the configured PDP addresses, the maximum message
+        size, and specific device capabilities.  The latter include
+        input port-based and output port-based classification and/or
+        policing, support for flow based policing, aggregate based
+        policing, traffic shaping capabilities, etc."
+    ::= { qosDeviceConfig 2 }
+
+qosDeviceAttributeEntry OBJECT-TYPE
+    SYNTAX QosDeviceAttributeEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "The single instance of this class indicates specific
+        attributes of the device."
+    INDEX { qosDeviceAttributeId }
+    ::= { qosDeviceAttributeTable 1 }
+
+QosDeviceAttributeEntry ::= SEQUENCE {
+        qosDeviceAttributeId     PolicyInstanceId,
+        qosDevicePepDomain       DisplayString,
+        qosDevicePrimaryPdp      IpAddress,
+        qosDeviceSecondaryPdp    IpAddress,
+        qosDeviceMaxMessageSize  Unsigned32,
+        qosDeviceCapabilities    BITS
+    }
+
+qosDeviceAttributeId OBJECT-TYPE
+    SYNTAX PolicyInstanceId
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "An integer index to identify the instance of the policy class."
+    ::= { qosDeviceAttributeEntry 1 }
+
+qosDevicePepDomain OBJECT-TYPE
+    SYNTAX DisplayString
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The QoS domain that this device belongs to.  This is
+        configured locally on the device (perhaps by some management
+        protocol such as SNMP).  By default, it is the zero-length
+        string."
+        ::= { qosDeviceAttributeEntry 2 }
+
+qosDevicePrimaryPdp OBJECT-TYPE
+    SYNTAX IpAddress
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The address of the PDP configured to be the primary PDP for
+        the device."
+    ::= { qosDeviceAttributeEntry 3 }
+
+qosDeviceSecondaryPdp OBJECT-TYPE
+    SYNTAX IpAddress
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The address of the PDP configured to be the secondary PDP for
+        the device.  An address of zero indicates no secondary is
+        configured."
+    ::= { qosDeviceAttributeEntry 4 }
+
+qosDeviceMaxMessageSize OBJECT-TYPE
+    SYNTAX Unsigned32
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The maximum size message that this PEP is capable of
+        receiving in bytes.  A value of zero means that the maximum
+        message size is unspecified (but does not mean it is
+        unlimited).  A message greater than this maximum results in a
+        MessageTooBig error on a 'no commit' REP."
+    ::= { qosDeviceAttributeEntry 5 }
+
+qosDeviceCapabilities OBJECT-TYPE
+    SYNTAX BITS {
+        unspecified (0),
+
+        -- QoS labels supported
+        layer2Cos (1), ipPrecedence (2), dscp (3)
+        }
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "An enumeration of device capabilities.  Used by the PDP to
+        select policies and configuration to push to the PEP."
+    ::= { qosDeviceAttributeEntry 6 }
+
+qosInterfaceTypeTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF QosInterfaceTypeEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "This class describes the interface types of the interfaces
+        that exist on the device.  It includes the queue type, role
+        combination and capabilities of interfaces.  The PEP does not
+        report which specific interfaces have which characteristics."
+    ::= { qosDeviceConfig 3 }
+
+qosInterfaceTypeEntry OBJECT-TYPE
+    SYNTAX QosInterfaceTypeEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "An instance of this class describes a role combination for
+        an interface type of an interface that exists on the device."
+    INDEX { qosInterfaceTypeId }
+    ::= { qosInterfaceTypeTable 1 }
+
+QosInterfaceTypeEntry ::= SEQUENCE {
+        qosInterfaceTypeId           PolicyInstanceId,
+        qosInterfaceQueueType        QosInterfaceQueueType,
+        qosInterfaceTypeRoles        RoleCombination,
+        qosInterfaceTypeCapabilities QosInterfaceTypeCapabilities
+    }
+
+qosInterfaceTypeId OBJECT-TYPE
+    SYNTAX PolicyInstanceId
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "An integer index to identify the instance of the policy class."
+    ::= { qosInterfaceTypeEntry 1 }
+
+qosInterfaceQueueType OBJECT-TYPE
+    SYNTAX QosInterfaceQueueType
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The interface type in terms of number of queues and
+        thresholds."
+    ::= { qosInterfaceTypeEntry 2 }
+
+qosInterfaceTypeRoles OBJECT-TYPE
+    SYNTAX RoleCombination
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "A combination of roles on at least one interface of type
+        qosInterfaceType."
+    ::= { qosInterfaceTypeEntry 3 }
+
+qosInterfaceTypeCapabilities OBJECT-TYPE
+    SYNTAX QosInterfaceTypeCapabilities
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "An enumeration of interface capabilities.  Used by the PDP to
+        select policies and configuration to push to the PEP."
+    ::= { qosInterfaceTypeEntry 4 }
+
+--
+-- General Config for the entire domain.
+--
+
+-- Table of DiffServ codepoint mappings
+-- Maps DSCP to marked-down DSCP, IP precedence and CoS
+
+qosDomainConfig OBJECT IDENTIFIER ::= { ciscoQosPIBMIB 3 }
+
+qosDiffServMappingTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF QosDiffServMappingEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "Maps each DSCP to a marked-down DSCP.  Also maps each DSCP to
+        an IP precedence and QosLayer2Cos.  When configured for the
+        first time, all 64 entries of the table must be
+        specified. Thereafter, instances may be modified (with a
+        delete and install in a single decision) but not deleted
+        unless all instances are deleted."
+    ::= { qosDomainConfig 1 }
+
+qosDiffServMappingEntry OBJECT-TYPE
+    SYNTAX QosDiffServMappingEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "An instance of this class represents mappings from a DSCP."
+    INDEX { qosDscp }
+    ::= { qosDiffServMappingTable 1 }
+
+QosDiffServMappingEntry ::= SEQUENCE {
+        qosDscp       Dscp,
+        qosMarkedDscp Dscp,
+        qosL2Cos      QosLayer2Cos
+        }
+
+qosDscp OBJECT-TYPE
+    SYNTAX Dscp
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "A DSCP for which this entry contains mappings."
+    ::= { qosDiffServMappingEntry 1 }
+
+qosMarkedDscp OBJECT-TYPE
+    SYNTAX Dscp
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The DSCP to use instead of the qosDscp when the packet is out
+        of profile and hence marked as such."
+    ::= { qosDiffServMappingEntry 2 }
+
+qosL2Cos OBJECT-TYPE
+    SYNTAX QosLayer2Cos
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The L2 CoS value to use when mapping this DSCP to layer 2
+        CoS."
+    ::= { qosDiffServMappingEntry 3 }
+
+-- Table of Layer 2 CoS to DSCP mappings
+--
+
+qosCosToDscpTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF QosCosToDscpEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "Maps each of eight CoS values to a DSCP.  When configured for
+        the first time, all 8 entries of the table must be
+        specified. Thereafter, instances may be modified (with a
+        delete and install in a single decision) but not deleted
+        unless all instances are deleted."
+    ::= { qosDomainConfig 2 }
+
+qosCosToDscpEntry OBJECT-TYPE
+    SYNTAX QosCosToDscpEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "An instance of this class maps a CoS value to a DSCP."
+    INDEX { qosCosToDscpCos }
+    ::= { qosCosToDscpTable 1 }
+
+QosCosToDscpEntry ::= SEQUENCE {
+        qosCosToDscpCos  QosLayer2Cos,
+        qosCosToDscpDscp Dscp
+        }
+
+qosCosToDscpCos OBJECT-TYPE
+    SYNTAX QosLayer2Cos
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "The L2 CoS value that is being mapped."
+    ::= { qosCosToDscpEntry 1 }
+
+qosCosToDscpDscp OBJECT-TYPE
+    SYNTAX Dscp
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The DSCP value to use when mapping the L2 CoS to a DSCP."
+    ::= { qosCosToDscpEntry 2 }
+
+--
+-- The Unmatched Policy Table
+--
+
+-- This group specifies the policy to apply to an interface for a
+-- given role combination where no other policy matches.  More
+-- specifically, the unmatched policy is what is applied to non-IP
+-- packets for which there is no MAC classification, or what is
+-- applied to IP packets that do not match any ACE in any ACL applied
+-- to the interface.
+
+qosUnmatchedPolicy OBJECT IDENTIFIER ::= { ciscoQosPIBMIB 4 }
+
+qosUnmatchedPolicyTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF QosUnmatchedPolicyEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "A policy class that specifies what QoS to apply to a packet
+        that does not match any other policy configured for this role
+        combination for a particular direction of traffic."
+    ::= { qosUnmatchedPolicy 1 }
+
+qosUnmatchedPolicyEntry OBJECT-TYPE
+    SYNTAX QosUnmatchedPolicyEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "An instance of this class specifies the unmatched policy
+        for a particular role combination for incoming or outgoing
+        traffic."
+    INDEX { qosUnmatchedPolicyId }
+    ::= { qosUnmatchedPolicyTable 1 }
+
+QosUnmatchedPolicyEntry ::= SEQUENCE {
+        qosUnmatchedPolicyId            PolicyInstanceId,
+        qosUnmatchedPolicyRole          RoleCombination,
+        qosUnmatchedPolicyDirection     INTEGER,
+        qosUnmatchedPolicyDscp          Dscp,
+        qosUnmatchedPolicyDscpTrusted   TruthValue,
+        qosUnmatchPolMicroFlowPolicerId PolicyInstanceId,
+        qosUnmatchedPolicyAggregateId   PolicyInstanceId
+    }
+
+qosUnmatchedPolicyId OBJECT-TYPE
+    SYNTAX PolicyInstanceId
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "An integer index to identify the instance of the policy class."
+    ::= { qosUnmatchedPolicyEntry 1 }
+
+qosUnmatchedPolicyRole OBJECT-TYPE
+    SYNTAX RoleCombination
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "Role combination for which this instance applies."
+    ::= { qosUnmatchedPolicyEntry 2 }
+
+qosUnmatchedPolicyDirection OBJECT-TYPE
+    SYNTAX INTEGER { in(0), out(1) }
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The direction of packet flow at the interface in question to
+        which this instance applies."
+    ::= { qosUnmatchedPolicyEntry 3 }
+
+qosUnmatchedPolicyDscp OBJECT-TYPE
+    SYNTAX Dscp
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The DSCP to classify the unmatched packet with.  This must be
+        specified even if qosUnmatchedPolicyDscpTrusted is true."
+    ::= { qosUnmatchedPolicyEntry 4 }
+
+qosUnmatchedPolicyDscpTrusted OBJECT-TYPE
+    SYNTAX TruthValue
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "If this attribute is true, then the Dscp associated with the
+        packet is trusted, i.e., it is assumed to have already been
+        set.  In this case, the Dscp is not rewritten with
+        qosUnmatchedPolicyDscp (qosUnmatchedPolicyDscp is ignored)
+        unless this is a non-IP packet and arrives untagged.  The
+        packet is still policed as part of its micro flow and its
+        aggregate flow.
+
+        When a trusted action is applied to an input interface, the
+        Dscp (for an IP packet) or CoS (for a non-IP packet)
+        associated with the packet is the one contained in the packet.
+        When a trusted action is applied to an output interface, the
+        Dscp associated with the packet is the one that is the result
+        of the input classification and policing."
+    ::= { qosUnmatchedPolicyEntry 5 }
+
+qosUnmatchPolMicroFlowPolicerId OBJECT-TYPE
+    SYNTAX PolicyInstanceId
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "An index identifying the instance of policer to apply to
+        unmatched packets.  It must correspond to the integer index of
+        an instance of class qosPolicerTable or be zero.  If zero, the
+        microflow is not policed."
+    ::= { qosUnmatchedPolicyEntry 6 }
+
+qosUnmatchedPolicyAggregateId OBJECT-TYPE
+    SYNTAX PolicyInstanceId
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "An index identifying the aggregate that the packet belongs
+        to.  It must correspond to the integer index of an instance of
+        class qosAggregateTable or be zero.  If zero, the microflow
+        does not belong to any aggregate and is not policed as part of
+        any aggregate."
+    ::= { qosUnmatchedPolicyEntry 7 }
+
+--
+-- The Policer Group
+--
+
+-- This group specifies policer parameters that can then be used by
+-- other groups such as the IP ACL Actions, or the unmatched policy.
+-- This group also defines aggregates that flows can then be assigned
+-- to.
+
+qosPolicer OBJECT IDENTIFIER ::= { ciscoQosPIBMIB 5 }
+
+-- The Policer Definition Table
+--
+
+qosPolicerTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF QosPolicerEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "A class specifying policing parameters for both microflows
+        and aggregate flows.  This table is designed for policing
+        according to a token bucket scheme where an average rate and
+        burst size is specified."
+    ::= { qosPolicer 1 }
+
+qosPolicerEntry OBJECT-TYPE
+    SYNTAX QosPolicerEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "An instance of this class specifies a set of policing
+        parameters."
+    INDEX { qosPolicerId }
+    ::= { qosPolicerTable 1 }
+
+QosPolicerEntry ::= SEQUENCE {
+        qosPolicerId          PolicyInstanceId,
+        qosPolicerRate        Unsigned64,
+        qosPolicerNormalBurst Unsigned32,
+        qosPolicerExcessBurst Unsigned32,
+        qosPolicerAction      INTEGER
+    }
+
+qosPolicerId OBJECT-TYPE
+    SYNTAX PolicyInstanceId
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "An integer index to identify the instance of the policy class."
+    ::= { qosPolicerEntry 1 }
+
+qosPolicerRate OBJECT-TYPE
+    SYNTAX Unsigned64
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The token rate.  It is specified in units of bit/s. A rate of
+        zero means that all packets will be out of profile.  If the
+        qosPolicerAction is set to drop then this effectively
+        denies any service to packets policed by this policer."
+    ::= { qosPolicerEntry 2 }
+
+qosPolicerNormalBurst OBJECT-TYPE
+    SYNTAX Unsigned32
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The normal size of a burst in terms of bits."
+    ::= { qosPolicerEntry 3 }
+
+qosPolicerExcessBurst OBJECT-TYPE
+    SYNTAX Unsigned32
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The excess size of a burst in terms of bits."
+    ::= { qosPolicerEntry 4 }
+
+qosPolicerAction OBJECT-TYPE
+    SYNTAX INTEGER { drop(0), mark(1), shape(2) }
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "An indication of how to handle out of profile packets.  When
+        the shape action is chosen then traffic is shaped to the rate
+        specified by qosPolicerRate."
+    ::= { qosPolicerEntry 5 }
+
+-- The Aggregate Table
+--
+
+qosAggregateTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF QosAggregateEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "Instances of this class identify aggregate flows and the
+        policer to apply to each."
+    ::= { qosPolicer 2 }
+
+qosAggregateEntry OBJECT-TYPE
+    SYNTAX QosAggregateEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "An instance of this class specifies the policer to apply to
+        an aggregate flow."
+    INDEX { qosAggregateId }
+    ::= { qosAggregateTable 1 }
+
+QosAggregateEntry ::= SEQUENCE {
+        qosAggregateId        PolicyInstanceId,
+        qosAggregatePolicerId PolicyInstanceId
+    }
+
+qosAggregateId OBJECT-TYPE
+    SYNTAX PolicyInstanceId
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "An integer index to identify the instance of the policy class."
+    ::= { qosAggregateEntry 1 }
+
+qosAggregatePolicerId OBJECT-TYPE
+    SYNTAX PolicyInstanceId
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "An index identifying the instance of policer to apply to the
+        aggregate.  It must correspond to the integer index of an
+        instance of class qosPolicerTable."
+    ::= { qosAggregateEntry 2 }
+
+--
+-- MAC DA Classification Group
+--
+
+-- This group determines the CoS to assign to a MAC frame on the
+-- basis of the destination MAC address.  There is no provision for
+-- policing or rate limiting at layer 2.
+
+qosMacQos OBJECT IDENTIFIER ::= { ciscoQosPIBMIB 6 }
+
+qosMacClassificationTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF QosMacClassificationEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "A class of MAC/Vlan tuples and their associated CoS values."
+    ::= { qosMacQos 1 }
+
+qosMacClassificationEntry OBJECT-TYPE
+    SYNTAX QosMacClassificationEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "An instance of this class specifies the mapping of a VLAN
+        and a MAC address to a CoS value."
+    INDEX { qosMacClassificationId }
+    ::= { qosMacClassificationTable 1 }
+
+QosMacClassificationEntry ::= SEQUENCE {
+        qosMacClassificationId PolicyInstanceId,
+        qosDstMacVlan          INTEGER,
+        qosDstMacAddress       MacAddress,
+        qosDstMacCos           QosLayer2Cos
+    }
+
+qosMacClassificationId OBJECT-TYPE
+    SYNTAX PolicyInstanceId
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "An integer index to identify the instance of the policy class."
+    ::= { qosMacClassificationEntry 1 }
+
+qosDstMacVlan OBJECT-TYPE
+    SYNTAX INTEGER (1..4095)
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The VLAN of the destination MAC address of the L2 frame."
+    ::= { qosMacClassificationEntry 2 }
+
+qosDstMacAddress OBJECT-TYPE
+    SYNTAX MacAddress
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The destination MAC address of the L2 frame."
+    ::= { qosMacClassificationEntry 3 }
+
+qosDstMacCos OBJECT-TYPE
+    SYNTAX QosLayer2Cos
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The CoS to assign the packet with the associated MAC/VLAN
+        tuple.  Note that this CoS is overridden by the policies to
+        classify the frame at layer 3 if there are any."
+    ::= { qosMacClassificationEntry 4 }
+
+--
+-- The IP Classification and Policing Group
+--
+
+qosIpQos OBJECT IDENTIFIER ::= { ciscoQosPIBMIB 7 }
+
+-- The ACE Table
+--
+
+qosIpAceTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF QosIpAceEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "ACE definitions."
+    ::= { qosIpQos 1 }
+
+qosIpAceEntry OBJECT-TYPE
+    SYNTAX QosIpAceEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "An instance of this class specifies an ACE."
+    INDEX { qosIpAceId }
+    ::= { qosIpAceTable 1 }
+
+QosIpAceEntry ::= SEQUENCE {
+        qosIpAceId              PolicyInstanceId,
+        qosIpAceDstAddr         IpAddress,
+        qosIpAceDstAddrMask     IpAddress,
+        qosIpAceSrcAddr         IpAddress,
+        qosIpAceSrcAddrMask     IpAddress,
+        qosIpAceDscpMin         Dscp,
+        qosIpAceDscpMax         Dscp,
+        qosIpAceProtocol        INTEGER,
+        qosIpAceDstL4PortMin    INTEGER,
+        qosIpAceDstL4PortMax    INTEGER,
+        qosIpAceSrcL4PortMin    INTEGER,
+        qosIpAceSrcL4PortMax    INTEGER,
+        qosIpAcePermit          TruthValue
+    }
+
+qosIpAceId OBJECT-TYPE
+    SYNTAX PolicyInstanceId
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "An integer index to identify the instance of the policy class."
+    ::= { qosIpAceEntry 1 }
+
+qosIpAceDstAddr OBJECT-TYPE
+    SYNTAX IpAddress
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The IP address to match against the packet's destination IP
+        address."
+    ::= { qosIpAceEntry 2 }
+
+qosIpAceDstAddrMask OBJECT-TYPE
+    SYNTAX IpAddress
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "A mask for the matching of the destination IP address."
+    ::= { qosIpAceEntry 3 }
+
+qosIpAceSrcAddr OBJECT-TYPE
+    SYNTAX IpAddress
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The IP address to match against the packet's source IP
+        address."
+    ::= { qosIpAceEntry 4 }
+
+qosIpAceSrcAddrMask OBJECT-TYPE
+    SYNTAX IpAddress
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "A mask for the matching of the source IP address."
+    ::= { qosIpAceEntry 5 }
+
+qosIpAceDscpMin OBJECT-TYPE
+    SYNTAX Dscp
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The minimum value that the DSCP in the packet can have and
+        match this ACE."
+    ::= { qosIpAceEntry 6 }
+
+qosIpAceDscpMax OBJECT-TYPE
+    SYNTAX Dscp
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The maximum value that the DSCP in the packet can have and
+        match this ACE."
+    ::= { qosIpAceEntry 7 }
+
+qosIpAceProtocol OBJECT-TYPE
+    SYNTAX INTEGER (0..255)
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The IP protocol to match against the packet's protocol.
+        A value of zero means match all."
+    ::= { qosIpAceEntry 8 }
+
+qosIpAceDstL4PortMin OBJECT-TYPE
+    SYNTAX INTEGER (0..65535)
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The minimum value that the packet's layer 4 dest port number
+        can have and match this ACE."
+    ::= { qosIpAceEntry 9 }
+
+qosIpAceDstL4PortMax OBJECT-TYPE
+    SYNTAX INTEGER (0..65535)
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The maximum value that the packet's layer 4 dest port number
+        can have and match this ACE."
+    ::= { qosIpAceEntry 10 }
+
+qosIpAceSrcL4PortMin OBJECT-TYPE
+    SYNTAX INTEGER (0..65535)
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The minimum value that the packet's layer 4 source port
+        number can have and match this ACE."
+    ::= { qosIpAceEntry 11 }
+
+qosIpAceSrcL4PortMax OBJECT-TYPE
+    SYNTAX INTEGER (0..65535)
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The maximum value that the packet's layer 4 source port
+        number can have and match this ACE."
+    ::= { qosIpAceEntry 12 }
+
+qosIpAcePermit OBJECT-TYPE
+    SYNTAX TruthValue
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "If the packet matches this ACE and the value of this attribute
+        is true, then the matching process terminates and the QoS
+        associated with this ACE (indirectly through the ACL) is
+        applied to the packet.  If the value of this attribute is false,
+        then no more ACEs in this ACL are compared to this packet and
+        matching continues with the first ACE of the next ACL."
+    ::= { qosIpAceEntry 13 }
+
+-- The ACL Definition Table
+--
+
+qosIpAclDefinitionTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF QosIpAclDefinitionEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "A class that defines a set of ACLs each being an ordered list
+         of ACEs."
+    ::= { qosIpQos 2 }
+
+qosIpAclDefinitionEntry OBJECT-TYPE
+    SYNTAX QosIpAclDefinitionEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "An instance of this class specifies an ACE in an ACL and its
+        order with respect to other ACEs in the same ACL."
+    INDEX { qosIpAclDefinitionId }
+    ::= { qosIpAclDefinitionTable 1 }
+
+QosIpAclDefinitionEntry ::= SEQUENCE {
+        qosIpAclDefinitionId PolicyInstanceId,
+        qosIpAclId PolicyInstanceId,
+        qosIpAceOrder Unsigned32,
+        qosIpAclDefAceId PolicyInstanceId
+    }
+
+qosIpAclDefinitionId OBJECT-TYPE
+    SYNTAX PolicyInstanceId
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "An integer index to identify the instance of the policy class."
+    ::= { qosIpAclDefinitionEntry 1 }
+
+qosIpAclId OBJECT-TYPE
+    SYNTAX PolicyInstanceId
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "An index for this ACL.  There will be one instance of
+        policy class qosIpAclDefinition with this integer index for
+        each ACE in the ACL per role combination."
+    ::= { qosIpAclDefinitionEntry 2 }
+
+qosIpAceOrder OBJECT-TYPE
+    SYNTAX Unsigned32
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "An integer that determines the position of this ACE in the ACL.
+        An ACE with a given order is positioned in the access contol
+        list before one with a higher order."
+    ::= { qosIpAclDefinitionEntry 3 }
+
+qosIpAclDefAceId OBJECT-TYPE
+    SYNTAX PolicyInstanceId
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "This attribute specifies the ACE in the qosIpAceTable that is
+        in the ACL specified by qosIpAclId at the position specified
+        by qosIpAceOrder."
+    ::= { qosIpAclDefinitionEntry 4 }
+
+-- The ACL Action Table
+--
+
+qosIpAclActionTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF QosIpAclActionEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "A class that applies a set of ACLs to interfaces specifying,
+        for each interface the order of the ACL with respect to other
+        ACLs applied to the same interface and, for each ACL the
+        action to take for a packet that matches a permit ACE in that
+        ACL.  Interfaces are specified abstractly in terms of
+        interface role combinations."
+    ::= { qosIpQos 3 }
+
+qosIpAclActionEntry OBJECT-TYPE
+    SYNTAX QosIpAclActionEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "An instance of this class applies an ACL to traffic in a
+        particular direction on an interface with a particular role
+        combination, and specifies the action for packets which match
+        the ACL."
+    INDEX { qosIpAclActionId }
+    ::= { qosIpAclActionTable 1 }
+
+QosIpAclActionEntry ::= SEQUENCE {
+        qosIpAclActionId PolicyInstanceId,
+        qosIpAclActAclId PolicyInstanceId,
+        qosIpAclInterfaceRoles RoleCombination,
+        qosIpAclInterfaceDirection INTEGER,
+        qosIpAclOrder Unsigned32,
+        qosIpAclDscp Dscp,
+        qosIpAclDscpTrusted TruthValue,
+        qosIpAclMicroFlowPolicerId PolicyInstanceId,
+        qosIpAclAggregateId PolicyInstanceId
+    }
+
+qosIpAclActionId OBJECT-TYPE
+    SYNTAX PolicyInstanceId
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "An integer index to identify the instance of the policy class."
+    ::= { qosIpAclActionEntry 1 }
+
+qosIpAclActAclId OBJECT-TYPE
+    SYNTAX PolicyInstanceId
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The ACL associated with this action."
+    ::= { qosIpAclActionEntry 2 }
+
+qosIpAclInterfaceRoles OBJECT-TYPE
+    SYNTAX RoleCombination
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The interfaces to which this ACL applies specified in terms
+        of a set of roles."
+    ::= { qosIpAclActionEntry 3 }
+
+qosIpAclInterfaceDirection OBJECT-TYPE
+    SYNTAX INTEGER { in(0), out(1) }
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The direction of packet flow at the interface in question to
+        which this ACL applies."
+    ::= { qosIpAclActionEntry 4 }
+
+qosIpAclOrder OBJECT-TYPE
+    SYNTAX Unsigned32
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "An integer that determines the order of this ACL in the list
+        of ACLs applied to interfaces of the specified role
+        combination. An ACL with a given order is positioned in the
+        list before one with a higher order."
+    ::= { qosIpAclActionEntry 5 }
+
+qosIpAclDscp OBJECT-TYPE
+    SYNTAX Dscp
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The DSCP to classify the packet with in the event that the
+        packet matches an ACE in this ACL and the ACE is a permit."
+    ::= { qosIpAclActionEntry 6 }
+
+qosIpAclDscpTrusted OBJECT-TYPE
+    SYNTAX TruthValue
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "If this attribute is true, then the Dscp associated with
+        the packet is trusted, i.e., it is assumed to have already
+        been set.  In this case, the Dscp is not rewritten with
+        qosIpAclDscp (qosIpAclDscp is ignored).  The packet is still
+        policed as part of its micro flow and its aggregate flow.
+
+        When a trusted action is applied to an input interface, the
+        Dscp associated with the packet is the one contained in the
+        packet.  When a trusted action is applied to an output
+        interface, the Dscp associated with the packet is the one that
+        is the result of the input classification and policing."
+    ::= { qosIpAclActionEntry 7 }
+
+qosIpAclMicroFlowPolicerId OBJECT-TYPE
+    SYNTAX PolicyInstanceId
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "An index identifying the instance of policer to apply to the
+        microflow.  It must correspond to the integer index of an
+        instance of class qosPolicerTableor be zero.  If zero, the
+        microflow is not policed."
+    ::= { qosIpAclActionEntry 8 }
+
+qosIpAclAggregateId OBJECT-TYPE
+    SYNTAX PolicyInstanceId
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "An index identifying the aggregate that the packet belongs
+        to.  It must correspond to the integer index of an instance of
+        class qosAggregateTable or be zero.  If zero, the microflow
+        does not belong to any aggregate and is not policed as part of
+        any aggregate."
+    ::= { qosIpAclActionEntry 9 }
+
+--
+-- QoS Interface Group
+--
+
+-- This group specifies the configuration of the various interface
+-- types including the setting of thresholds, queueing parameters,
+-- mapping of DSCPs to queues and thresholds, etc.
+
+qosIfParameters OBJECT IDENTIFIER ::= { ciscoQosPIBMIB 8 }
+
+-- Table of scheduling discipline preferences
+--
+
+qosIfSchedulingPreferencesTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF QosIfSchedulingPreferenceEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "This class specifies the scheduling preference an interface
+        chooses if it supports multiple scheduling types.  Higher
+        values are preferred over lower values."
+    ::= { qosIfParameters 1 }
+
+qosIfSchedulingPreferenceEntry OBJECT-TYPE
+    SYNTAX QosIfSchedulingPreferenceEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "An instance of this class specifies a scheduling preference
+        for a queue-type on an interface with a particular role
+        combination."
+    INDEX { qosIfSchedulingPreferenceId }
+    ::= { qosIfSchedulingPreferencesTable 1 }
+
+QosIfSchedulingPreferenceEntry ::=  SEQUENCE {
+        qosIfSchedulingPreferenceId PolicyInstanceId,
+        qosIfSchedulingRoles RoleCombination,
+        qosIfSchedulingPreference INTEGER,
+        qosIfSchedulingDiscipline INTEGER,
+        qosIfSchedulingQueueType QosInterfaceQueueType
+    }
+
+qosIfSchedulingPreferenceId OBJECT-TYPE
+    SYNTAX PolicyInstanceId
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "An integer index to identify the instance of the policy class."
+    ::= { qosIfSchedulingPreferenceEntry 1 }
+
+qosIfSchedulingRoles OBJECT-TYPE
+    SYNTAX RoleCombination
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The combination of roles the interface must have for this
+        policy instance to apply to that interface."
+    ::= { qosIfSchedulingPreferenceEntry 2 }
+
+qosIfSchedulingPreference OBJECT-TYPE
+    SYNTAX INTEGER (1..16)
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The preference to use this scheduling discipline and queue
+        type.  A higher value means a higher preference.  If two
+        disciplines have the same preference the choice is a local
+        decision."
+    ::= { qosIfSchedulingPreferenceEntry 3 }
+
+qosIfSchedulingDiscipline OBJECT-TYPE
+    SYNTAX INTEGER {
+        weightedFairQueueing (1),
+        weightedRoundRobin (2),
+        customQueueing (3),
+        priorityQueueing (4),
+        classBasedWFQ (5),
+        fifo (6),
+        pqWrr (7),
+        pqCbwfq (8)
+        }
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "An enumerate type for all the known scheduling disciplines."
+    ::= { qosIfSchedulingPreferenceEntry 4 }
+
+qosIfSchedulingQueueType OBJECT-TYPE
+    SYNTAX QosInterfaceQueueType
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The queue type of this preference."
+    ::= { qosIfSchedulingPreferenceEntry 5 }
+
+-- Table of drop mechanism preferences
+--
+
+qosIfDropPreferenceTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF QosIfDropPreferenceEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "This class specifies the preference of the drop mechanism an
+        interface chooses if it supports multiple drop mechanisms.
+        Higher values are preferred over lower values."
+    ::= { qosIfParameters 2 }
+
+qosIfDropPreferenceEntry OBJECT-TYPE
+    SYNTAX QosIfDropPreferenceEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "An instance of this class specifies a drop preference for
+        a drop mechanism on an interface with a particular role
+        combination."
+    INDEX { qosIfDropPreferenceId }
+    ::= { qosIfDropPreferenceTable 1 }
+
+QosIfDropPreferenceEntry ::= SEQUENCE {
+        qosIfDropPreferenceId PolicyInstanceId,
+        qosIfDropRoles RoleCombination,
+        qosIfDropPreference INTEGER,
+        qosIfDropDiscipline INTEGER
+    }
+
+qosIfDropPreferenceId OBJECT-TYPE
+    SYNTAX PolicyInstanceId
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "An integer index to identify the instance of the policy class."
+    ::= { qosIfDropPreferenceEntry 1 }
+
+qosIfDropRoles OBJECT-TYPE
+    SYNTAX RoleCombination
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The combination of roles the interface must have for this
+        policy instance to apply to that interface."
+    ::= { qosIfDropPreferenceEntry 2 }
+
+qosIfDropPreference OBJECT-TYPE
+    SYNTAX INTEGER (1..16)
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The preference to use this drop mechanism.  A higher value
+        means a higher preference.  If two mechanisms have the same
+        preference the choice is a local decision."
+    ::= { qosIfDropPreferenceEntry 3 }
+
+qosIfDropDiscipline OBJECT-TYPE
+    SYNTAX INTEGER {
+        qosIfDropWRED (1),
+        qosIfDropTailDrop (2)
+        }
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "An enumerate type for all the known drop mechanisms."
+    ::= { qosIfDropPreferenceEntry 4 }
+
+-- The Assignment of DSCPs to queues and thresholds for each interface
+-- type.
+--
+
+qosIfDscpAssignmentTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF QosIfDscpAssignmentEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "The assignment of each DSCP to a queue and threshold for each
+        interface queue type."
+    ::= { qosIfParameters 3 }
+
+qosIfDscpAssignmentEntry OBJECT-TYPE
+    SYNTAX QosIfDscpAssignmentEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "An instance of this class specifies the queue and threshold
+        set for a packet with a particular DSCP on an interface of
+        a particular type with a particular role combination."
+    INDEX { qosIfDscpAssignmentId }
+    ::= { qosIfDscpAssignmentTable 1 }
+
+QosIfDscpAssignmentEntry ::= SEQUENCE {
+        qosIfDscpAssignmentId PolicyInstanceId,
+        qosIfDscpRoles RoleCombination,
+        qosIfQueueType QosInterfaceQueueType,
+        qosIfDscp Dscp,
+        qosIfQueue INTEGER,
+        qosIfThresholdSet INTEGER
+        }
+
+qosIfDscpAssignmentId OBJECT-TYPE
+    SYNTAX PolicyInstanceId
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "An integer index to identify the instance of the policy class."
+    ::= { qosIfDscpAssignmentEntry 1 }
+
+qosIfDscpRoles OBJECT-TYPE
+    SYNTAX RoleCombination
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The role combination the interface must be configured with."
+    ::= { qosIfDscpAssignmentEntry 2 }
+
+qosIfQueueType OBJECT-TYPE
+    SYNTAX QosInterfaceQueueType
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The interface queue type to which this row applies."
+    ::= { qosIfDscpAssignmentEntry 3 }
+
+qosIfDscp OBJECT-TYPE
+    SYNTAX Dscp
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The DSCP to which this row applies."
+    ::= { qosIfDscpAssignmentEntry 4 }
+
+qosIfQueue OBJECT-TYPE
+    SYNTAX INTEGER (1..64)
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The queue to which the DSCP applies for the given interface
+        type."
+    ::= { qosIfDscpAssignmentEntry 5 }
+
+qosIfThresholdSet OBJECT-TYPE
+    SYNTAX INTEGER (1..8)
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The threshold set of the specified queue to which the DSCP
+        applies for the given interface type."
+    ::= { qosIfDscpAssignmentEntry 6 }
+
+-- The configuration of RED thresholds
+--
+
+qosIfRedTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF QosIfRedEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "A class of lower and upper values for each threshold set in a
+        queue supporting WRED.  If the size of the queue for a given
+        threshold is below the lower value then packets assigned to
+        that threshold are always accepted into the queue.  If the
+        size of the queue is above upper value then packets are always
+        dropped.  If the size of the queue is between the lower and
+        the upper then packets are randomly dropped."
+    ::= { qosIfParameters 4 }
+
+qosIfRedEntry OBJECT-TYPE
+    SYNTAX QosIfRedEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "An instance of this class specifies threshold limits for a
+        particular RED threshold of a given threshold set on an
+        interface and with a particular role combination."
+    INDEX { qosIfRedId }
+    ::= { qosIfRedTable 1 }
+
+QosIfRedEntry ::= SEQUENCE {
+        qosIfRedId PolicyInstanceId,
+        qosIfRedRoles RoleCombination,
+        qosIfRedNumThresholdSets ThresholdSetRange,
+        qosIfRedThresholdSet INTEGER,
+        qosIfRedThresholdSetLower Percent,
+        qosIfRedThresholdSetUpper Percent
+        }
+
+qosIfRedId OBJECT-TYPE
+    SYNTAX PolicyInstanceId
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "An integer index to identify the instance of the policy class."
+    ::= { qosIfRedEntry 1 }
+
+qosIfRedRoles OBJECT-TYPE
+    SYNTAX RoleCombination
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The role combination the interface must be configured with."
+    ::= { qosIfRedEntry 2 }
+
+qosIfRedNumThresholdSets OBJECT-TYPE
+    SYNTAX ThresholdSetRange
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The values in this entry apply only to queues with the number
+        of thresholds specified by this attribute."
+    ::= { qosIfRedEntry 3 }
+
+qosIfRedThresholdSet OBJECT-TYPE
+    SYNTAX INTEGER (1..8)
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The threshold set to which the lower and upper values apply.
+        It must be in the range 1 through qosIfRedNumThresholdSets.
+        There must be exactly one PRI for each value in this range."
+    ::= { qosIfRedEntry 4 }
+
+qosIfRedThresholdSetLower OBJECT-TYPE
+    SYNTAX Percent
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The threshold value below which no packets are dropped."
+    ::= { qosIfRedEntry 5 }
+
+qosIfRedThresholdSetUpper OBJECT-TYPE
+    SYNTAX Percent
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The threshold value above which all packets are dropped."
+    ::= { qosIfRedEntry 6 }
+
+-- The configuration of tail drop thresholds
+--
+
+qosIfTailDropTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF QosIfTailDropEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "A class for threshold sets in a queue supporting tail drop.
+        If the size of the queue for a given threshold set is at or
+        below the specified value then packets assigned to that
+        threshold set are always accepted into the queue.  If the size
+        of the queue is above the specified value then packets are
+        always dropped."
+    ::= { qosIfParameters 5 }
+
+qosIfTailDropEntry OBJECT-TYPE
+    SYNTAX QosIfTailDropEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "An instance of this class specifies the queue depth for a
+        particular tail-drop threshold set on an interface with a
+        particular role combination."
+    INDEX { qosIfTailDropId }
+    ::= { qosIfTailDropTable 1 }
+
+QosIfTailDropEntry ::= SEQUENCE {
+        qosIfTailDropId PolicyInstanceId,
+        qosIfTailDropRoles RoleCombination,
+        qosIfTailDropNumThresholdSets ThresholdSetRange,
+        qosIfTailDropThresholdSet INTEGER,
+        qosIfTailDropThresholdSetValue Percent
+        }
+
+qosIfTailDropId OBJECT-TYPE
+    SYNTAX PolicyInstanceId
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "An integer index to identify the instance of the policy class."
+    ::= { qosIfTailDropEntry 1 }
+
+qosIfTailDropRoles OBJECT-TYPE
+    SYNTAX RoleCombination
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The role combination the interface must be configured with."
+    ::= { qosIfTailDropEntry 2 }
+
+qosIfTailDropNumThresholdSets OBJECT-TYPE
+    SYNTAX ThresholdSetRange
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The value in this entry applies only to queues with the
+        number of thresholds specified by this attribute."
+    ::= { qosIfTailDropEntry 3 }
+
+qosIfTailDropThresholdSet OBJECT-TYPE
+    SYNTAX INTEGER (1..8)
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The threshold set to which the threshold value applies"
+    ::= { qosIfTailDropEntry 4 }
+
+qosIfTailDropThresholdSetValue OBJECT-TYPE
+    SYNTAX Percent
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The threshold value above which packets are dropped."
+    ::= { qosIfTailDropEntry 5 }
+
+-- Weights for interfaces that support WRR, WFQ, CBWFQ, etc.
+--
+
+qosIfWeightsTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF QosIfWeightsEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "A class of scheduling weights for each queue of an interface
+        that supports weighted round robin scheduling or a mix of
+        priority queueing and weighted round robin.  For a queue with
+        N priority queues, the N highest queue numbers are the
+        priority queues with the highest queue number having the
+        highest priority.  WRR is applied to the non-priority queues."
+    ::= { qosIfParameters 6 }
+
+qosIfWeightsEntry OBJECT-TYPE
+    SYNTAX QosIfWeightsEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "An instance of this class specifies the scheduling weight for
+        a particular queue of an interface with a particular number
+        of queues and with a particular role combination."
+    INDEX { qosIfWeightsId }
+    ::= { qosIfWeightsTable 1 }
+
+QosIfWeightsEntry ::= SEQUENCE {
+        qosIfWeightsId PolicyInstanceId,
+        qosIfWeightsRoles RoleCombination,
+        qosIfWeightsNumQueues QueueRange,
+        qosIfWeightsQueue INTEGER,
+        qosIfWeightsDrainSize Unsigned32,
+        qosIfWeightsQueueSize Unsigned32
+    }
+
+qosIfWeightsId OBJECT-TYPE
+    SYNTAX PolicyInstanceId
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "An integer index to identify the instance of the policy class."
+    ::= { qosIfWeightsEntry 1 }
+
+qosIfWeightsRoles OBJECT-TYPE
+    SYNTAX RoleCombination
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The role combination the interface must be configured with."
+    ::= { qosIfWeightsEntry 2 }
+
+qosIfWeightsNumQueues OBJECT-TYPE
+    SYNTAX QueueRange
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The value of the weight in this instance applies only to
+        interfaces with the number of queues specified by this
+        attribute."
+    ::= { qosIfWeightsEntry 3 }
+
+qosIfWeightsQueue OBJECT-TYPE
+    SYNTAX INTEGER (1..64)
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The queue to which the weight applies."
+    ::= { qosIfWeightsEntry 4 }
+
+qosIfWeightsDrainSize OBJECT-TYPE
+    SYNTAX Unsigned32
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The maximum number of bytes that may be drained from the
+        queue in one cycle.  The percentage of the bandwith allocated
+        to this queue can be calculated from this attribute and the
+        sum of the drain sizes of all the non-priority queues of the
+        interface."
+    ::= { qosIfWeightsEntry 5 }
+
+qosIfWeightsQueueSize OBJECT-TYPE
+    SYNTAX Unsigned32
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The size of the queue in bytes.  Some devices set queue size
+        in terms of packets.  These devices must calculate the queue
+        size in packets by assuming an average packet size suitable
+        for the particular interface.
+
+        Some devices have a fixed size buffer to be shared among all
+        queues.  These devices must allocate a fraction of the
+        total buffer space to this queue calculated as the the ratio
+        of the queue size to the sum of the queue sizes for the
+        interface."
+    ::= { qosIfWeightsEntry 6 }
+
+qosPIBCompliances OBJECT IDENTIFIER ::= { qosPIBConformance 1 }
+qosPIBGroups OBJECT IDENTIFIER ::= { qosPIBConformance 2 }
+
+-- Compliance
+
+qosPIBCompliance MODULE-COMPLIANCE
+    STATUS current
+    DESCRIPTION
+        "The compliance statement for the QOS Policy Derived MIB."
+    MODULE        
+    MANDATORY-GROUPS {
+        qosDevicePibIncarnationTableGroup,
+        qosDeviceAttributeTableGroup,
+        qosInterfaceTypeTableGroup
+    }
+    ::= { qosPIBCompliances 1 }
+
+qosDevicePibIncarnationTableGroup OBJECT-GROUP
+    OBJECTS {
+        qosDevicePdpName,
+        qosDevicePibIncarnation,
+        qosDevicePibTtl
+    }
+    STATUS current
+    DESCRIPTION
+        ""
+    ::= { qosPIBGroups 1 }
+
+qosDeviceAttributeTableGroup OBJECT-GROUP
+    OBJECTS {
+        qosDevicePepDomain,
+        qosDevicePrimaryPdp,
+        qosDeviceSecondaryPdp,
+        qosDeviceMaxMessageSize,
+        qosDeviceCapabilities
+    }
+    STATUS current
+    DESCRIPTION
+        ""
+    ::= { qosPIBGroups 2 }
+
+qosInterfaceTypeTableGroup OBJECT-GROUP
+    OBJECTS {
+        qosInterfaceQueueType,
+        qosInterfaceTypeRoles,
+        qosInterfaceTypeCapabilities
+    }
+    STATUS current
+    DESCRIPTION
+        ""
+    ::= { qosPIBGroups 3 }
+
+qosDiffServMappingTableGroup OBJECT-GROUP
+    OBJECTS {
+        qosMarkedDscp,
+        qosL2Cos
+    }
+    STATUS current
+    DESCRIPTION
+        ""
+    ::= { qosPIBGroups 4 }
+
+qosCosToDscpTableGroup OBJECT-GROUP
+    OBJECTS {
+        qosCosToDscpDscp
+    }
+    STATUS current
+    DESCRIPTION
+        ""
+    ::= { qosPIBGroups 5 }
+
+qosUnmatchedPolicyTableGroup OBJECT-GROUP
+    OBJECTS {
+        qosUnmatchedPolicyRole,
+        qosUnmatchedPolicyDirection,
+        qosUnmatchedPolicyDscp,
+        qosUnmatchedPolicyDscpTrusted,
+        qosUnmatchPolMicroFlowPolicerId,
+        qosUnmatchedPolicyAggregateId
+    }
+    STATUS current
+    DESCRIPTION
+        ""
+    ::= { qosPIBGroups 6 }
+
+qosPolicerTableGroup OBJECT-GROUP
+    OBJECTS {
+        qosPolicerRate,
+        qosPolicerNormalBurst,
+        qosPolicerExcessBurst,
+        qosPolicerAction
+    }
+    STATUS current
+    DESCRIPTION
+        ""
+    ::= { qosPIBGroups 7 }
+
+qosAggregateTableGroup OBJECT-GROUP
+    OBJECTS {
+        qosAggregatePolicerId
+    }
+    STATUS current
+    DESCRIPTION
+        ""
+    ::= { qosPIBGroups 8 }
+
+qosMacClassificationTableGroup OBJECT-GROUP
+    OBJECTS {
+        qosDstMacVlan,
+        qosDstMacAddress,
+        qosDstMacCos
+    }
+    STATUS current
+    DESCRIPTION
+        ""
+    ::= { qosPIBGroups 9 }
+
+qosIpAceTableGroup OBJECT-GROUP
+    OBJECTS {
+        qosIpAceDstAddr,
+        qosIpAceDstAddrMask,
+        qosIpAceSrcAddr,
+        qosIpAceSrcAddrMask,
+        qosIpAceDscpMin,
+        qosIpAceDscpMax,
+        qosIpAceProtocol,
+        qosIpAceDstL4PortMin,
+        qosIpAceDstL4PortMax,
+        qosIpAceSrcL4PortMin,
+        qosIpAceSrcL4PortMax,
+        qosIpAcePermit
+    }
+    STATUS current
+    DESCRIPTION
+        ""
+    ::= { qosPIBGroups 10 }
+
+qosIpAclDefinitionTableGroup OBJECT-GROUP
+    OBJECTS {
+        qosIpAclId,
+        qosIpAceOrder,
+        qosIpAclDefAceId
+    }
+    STATUS current
+    DESCRIPTION
+        ""
+    ::= { qosPIBGroups 11 }
+
+qosIpAclActionTableGroup OBJECT-GROUP
+    OBJECTS {
+        qosIpAclActAclId,
+        qosIpAclInterfaceRoles,
+        qosIpAclInterfaceDirection,
+        qosIpAclOrder,
+        qosIpAclDscp,
+        qosIpAclDscpTrusted,
+        qosIpAclMicroFlowPolicerId,
+        qosIpAclAggregateId
+    }
+    STATUS current
+    DESCRIPTION
+        ""
+    ::= { qosPIBGroups 12 }
+
+qosIfSchedulingPreferencesTableGroup OBJECT-GROUP
+    OBJECTS {
+        qosIfSchedulingRoles,
+        qosIfSchedulingPreference,
+        qosIfSchedulingDiscipline,
+        qosIfSchedulingQueueType
+    }
+    STATUS current
+    DESCRIPTION
+        ""
+    ::= { qosPIBGroups 13 }
+
+qosIfDropPreferenceTableGroup OBJECT-GROUP
+    OBJECTS {
+        qosIfDropRoles,
+        qosIfDropPreference,
+        qosIfDropDiscipline
+    }
+    STATUS current
+    DESCRIPTION
+        ""
+    ::= { qosPIBGroups 14 }
+
+qosIfDscpAssignmentTableGroup OBJECT-GROUP
+    OBJECTS {
+        qosIfDscpRoles,
+        qosIfQueueType,
+        qosIfDscp,
+        qosIfQueue,
+        qosIfThresholdSet
+    }
+    STATUS current
+    DESCRIPTION
+        ""
+    ::= { qosPIBGroups 15 }
+
+qosIfRedTableGroup OBJECT-GROUP
+    OBJECTS {
+        qosIfRedRoles,
+        qosIfRedNumThresholdSets,
+        qosIfRedThresholdSet,
+        qosIfRedThresholdSetLower,
+        qosIfRedThresholdSetUpper
+    }
+    STATUS current
+    DESCRIPTION
+        ""
+    ::= { qosPIBGroups 16 }
+
+qosIfTailDropTableGroup OBJECT-GROUP
+    OBJECTS {
+        qosIfTailDropRoles,
+        qosIfTailDropNumThresholdSets,
+        qosIfTailDropThresholdSet,
+        qosIfTailDropThresholdSetValue
+    }
+    STATUS current
+    DESCRIPTION
+        ""
+    ::= { qosPIBGroups 17 }
+
+qosIfWeightsTableGroup OBJECT-GROUP
+    OBJECTS {
+        qosIfWeightsRoles,
+        qosIfWeightsNumQueues,
+        qosIfWeightsQueue,
+        qosIfWeightsDrainSize,
+        qosIfWeightsQueueSize
+    }
+    STATUS current
+    DESCRIPTION
+        ""
+    ::= { qosPIBGroups 18 }
+
+END
+
+
+