Initial commitHEADmain

1 files changed, 475 insertions, 0 deletions

diff --git a/MIBS/cisco/CISCO-MEMORY-POOL-MIB b/MIBS/cisco/CISCO-MEMORY-POOL-MIB
new file mode 100644
index 0000000..2b427a0
--- /dev/null
+++ b/MIBS/cisco/CISCO-MEMORY-POOL-MIB
@@ -0,0 +1,475 @@
+-- *****************************************************************
+-- CISCO-MEMORY-POOL-MIB
+--   
+-- February 1996, Jeffrey T. Johnson
+--   
+-- July 2001, Seth Wang
+--   
+-- Copyright (c) 2001, 2013 by cisco Systems Inc.
+-- All rights reserved.
+-- *****************************************************************
+
+CISCO-MEMORY-POOL-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY,
+    OBJECT-TYPE,
+    Integer32,
+    Gauge32,
+    NOTIFICATION-TYPE
+        FROM SNMPv2-SMI
+    MODULE-COMPLIANCE,
+    OBJECT-GROUP,
+    NOTIFICATION-GROUP
+        FROM SNMPv2-CONF
+    TEXTUAL-CONVENTION,
+    DisplayString,
+    TruthValue
+        FROM SNMPv2-TC
+    Percent
+        FROM CISCO-QOS-PIB-MIB
+    ciscoMgmt
+        FROM CISCO-SMI;
+
+
+ciscoMemoryPoolMIB MODULE-IDENTITY
+    LAST-UPDATED    "201309180000Z"
+    ORGANIZATION    "Cisco Systems, Inc."
+    CONTACT-INFO
+            "Postal: Cisco Systems, Inc.
+            170 West Tasman Drive
+            San Jose, CA 95134-1706
+            USA
+
+            Tel: +1 408 526 4000
+
+            E-mail: cs-snmp@cisco.com"
+    DESCRIPTION
+        "MIB module for monitoring memory pools"
+    REVISION        "201309180000Z"
+    DESCRIPTION
+        "Added new notification ciscoMemoryPoolLowMemoryNotif.
+        Added new notification ciscoMemoryPoolLowMemoryRecoveryNotif.
+        Added new object ciscoMemoryPoolLowMemoryNotifEnable.
+        Added new object ciscoMemoryPoolLowMemoryNotifThreshold.
+        Added new group ciscoMemoryPoolGroupRev1 which deprecates 
+        ciscoMemoryPoolGroup.
+        Added new compliance ciscoMemoryPoolComplianceRev2 which
+        deprecates ciscoMemoryPoolComplianceRev1."
+    REVISION        "200107310000Z"
+    DESCRIPTION
+        "Added a new table, ciscoMemoryPoolUtilizationTable, which
+        provides information about memory utilization."
+    REVISION        "199602010000Z"
+    DESCRIPTION
+        "Initial version of this MIB module."
+    ::= { ciscoMgmt 48 }
+
+
+
+CiscoMemoryPoolTypes ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION
+        "Represents the different types of memory pools that
+        may be present in a managed device.  Memory pools can
+        be roughly categorized into two groups, predefined
+        pools and dynamic pools.  The following pool types
+        are currently predefined:
+            1:  processor memory
+            2:  i/o memory
+            3:  pci memory
+            4:  fast memory
+            5:  multibus memory
+
+        Dynamic pools will have a pool type value greater than
+        any of the predefined types listed above.
+
+        Note that only the processor pool is required to be
+        supported by all devices.  Support for other pool types
+        is dependent on the device being managed."
+    SYNTAX          Integer32 (1..65535)
+ciscoMemoryPoolObjects  OBJECT IDENTIFIER
+    ::= { ciscoMemoryPoolMIB 1 }
+
+
+ciscoMemoryPoolTable OBJECT-TYPE
+    SYNTAX          SEQUENCE OF CiscoMemoryPoolEntry 
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "A table of memory pool monitoring entries."
+    ::= { ciscoMemoryPoolObjects 1 }
+
+ciscoMemoryPoolEntry OBJECT-TYPE
+    SYNTAX          CiscoMemoryPoolEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "An entry in the memory pool monitoring table."
+    INDEX           { ciscoMemoryPoolType } 
+    ::= { ciscoMemoryPoolTable 1 }
+
+CiscoMemoryPoolEntry ::= SEQUENCE {
+        ciscoMemoryPoolType                    CiscoMemoryPoolTypes,
+        ciscoMemoryPoolName                    DisplayString,
+        ciscoMemoryPoolAlternate               Integer32,
+        ciscoMemoryPoolValid                   TruthValue,
+        ciscoMemoryPoolUsed                    Gauge32,
+        ciscoMemoryPoolFree                    Gauge32,
+        ciscoMemoryPoolLargestFree             Gauge32,
+        ciscoMemoryPoolLowMemoryNotifThreshold Percent
+}
+
+ciscoMemoryPoolType OBJECT-TYPE
+    SYNTAX          CiscoMemoryPoolTypes
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "The type of memory pool for which this entry
+        contains information." 
+    ::= { ciscoMemoryPoolEntry 1 }
+
+ciscoMemoryPoolName OBJECT-TYPE
+    SYNTAX          DisplayString
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "A textual name assigned to the memory pool.  This
+        object is suitable for output to a human operator,
+        and may also be used to distinguish among the various
+        pool types, especially among dynamic pools." 
+    ::= { ciscoMemoryPoolEntry 2 }
+
+ciscoMemoryPoolAlternate OBJECT-TYPE
+    SYNTAX          Integer32 (0..65535)
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "Indicates whether or not this memory pool has an
+        alternate pool configured.  Alternate pools are
+        used for fallback when the current pool runs out
+        of memory.
+
+        If an instance of this object has a value of zero,
+        then this pool does not have an alternate.  Otherwise
+        the value of this object is the same as the value of
+        ciscoMemoryPoolType of the alternate pool." 
+    ::= { ciscoMemoryPoolEntry 3 }
+
+ciscoMemoryPoolValid OBJECT-TYPE
+    SYNTAX          TruthValue
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "Indicates whether or not the remaining objects in
+        this entry contain accurate data.  If an instance
+        of this object has the value false (which in and of
+        itself indicates an internal error condition), the
+        values of the remaining objects in the conceptual row
+        may contain inaccurate information (specifically, the
+        reported values may be less than the actual values)." 
+    ::= { ciscoMemoryPoolEntry 4 }
+
+ciscoMemoryPoolUsed OBJECT-TYPE
+    SYNTAX          Gauge32
+    UNITS           "bytes"
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "Indicates the number of bytes from the memory pool
+        that are currently in use by applications on the
+        managed device." 
+    ::= { ciscoMemoryPoolEntry 5 }
+
+ciscoMemoryPoolFree OBJECT-TYPE
+    SYNTAX          Gauge32
+    UNITS           "bytes"
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "Indicates the number of bytes from the memory pool
+        that are currently unused on the managed device.
+
+        Note that the sum of ciscoMemoryPoolUsed and
+        ciscoMemoryPoolFree is the total amount of memory
+        in the pool" 
+    ::= { ciscoMemoryPoolEntry 6 }
+
+ciscoMemoryPoolLargestFree OBJECT-TYPE
+    SYNTAX          Gauge32
+    UNITS           "bytes"
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "Indicates the largest number of contiguous bytes
+        from the memory pool that are currently unused on
+        the managed device." 
+    ::= { ciscoMemoryPoolEntry 7 }
+
+ciscoMemoryPoolLowMemoryNotifThreshold OBJECT-TYPE
+    SYNTAX          Percent
+    MAX-ACCESS      read-write
+    STATUS          current
+    DESCRIPTION
+        "This object is used to indicate the threshold value in
+        percentage of free memory remaining in a memory pool.
+        If the free memory available goes below this threshold value and
+        if ciscoMemoryPoolLowMemoryNotifEnable is set to 'true',
+        ciscoMemoryPoolLowMemoryNotif will be generated. When the
+        available free memory comes back to the threshold value
+        ciscoMemoryPoolLowMemoryRecoveryNotif will be generated." 
+    ::= { ciscoMemoryPoolEntry 8 }
+ 
+
+
+ciscoMemoryPoolUtilizationTable OBJECT-TYPE
+    SYNTAX          SEQUENCE OF CiscoMemoryPoolUtilizationEntry 
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "A table of memory pool utilization entries. Each of the
+        objects provides a general idea of how much of the memory
+        pool has been used over a given period of time. It is
+        determined as a weighted decaying average."
+    ::= { ciscoMemoryPoolObjects 2 }
+
+ciscoMemoryPoolUtilizationEntry OBJECT-TYPE
+    SYNTAX          CiscoMemoryPoolUtilizationEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "An entry in the memory pool utilization table."
+    AUGMENTS           { ciscoMemoryPoolEntry  } 
+    ::= { ciscoMemoryPoolUtilizationTable 1 }
+
+CiscoMemoryPoolUtilizationEntry ::= SEQUENCE {
+        ciscoMemoryPoolUtilization1Min  Percent,
+        ciscoMemoryPoolUtilization5Min  Percent,
+        ciscoMemoryPoolUtilization10Min Percent
+}
+
+ciscoMemoryPoolUtilization1Min OBJECT-TYPE
+    SYNTAX          Percent
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "This is the memory pool utilization for 1 minute." 
+    ::= { ciscoMemoryPoolUtilizationEntry 1 }
+
+ciscoMemoryPoolUtilization5Min OBJECT-TYPE
+    SYNTAX          Percent
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "This is the memory pool utilization for 5 minutes." 
+    ::= { ciscoMemoryPoolUtilizationEntry 2 }
+
+ciscoMemoryPoolUtilization10Min OBJECT-TYPE
+    SYNTAX          Percent
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "This is the memory pool utilization for 10 minutes." 
+    ::= { ciscoMemoryPoolUtilizationEntry 3 }
+ 
+
+
+ciscoMemoryPoolLowMemoryNotifEnable OBJECT-TYPE
+    SYNTAX          TruthValue
+    MAX-ACCESS      read-write
+    STATUS          current
+    DESCRIPTION
+        "This object is used to enable or disable the generation of
+        notification when the available memory in the system has fallen
+        below ciscoMemoryPoolLowMemoryNotifThreshold and on recovery.
+
+        Setting this object to 'true' will generate
+        ciscoMemoryPoolLowMemoryNotif and 
+        ciscoMemoryPoolLowMemoryRecoveryNotif. 
+
+        Setting this object to 'false' will disable the generation of
+        ciscoMemoryPoolLowMemoryNotif and
+        ciscoMemoryPoolLowMemoryRecoveryNotif." 
+    ::= { ciscoMemoryPoolObjects 3 }
+-- notifications
+
+ciscoMemoryPoolNotifications  OBJECT IDENTIFIER
+    ::= { ciscoMemoryPoolMIB 2 }
+
+ciscoMemoryPoolMIBNotificationPrefix  OBJECT IDENTIFIER
+    ::= { ciscoMemoryPoolNotifications 0 }
+
+
+ciscoMemoryPoolLowMemoryNotif NOTIFICATION-TYPE
+    OBJECTS         {
+                        ciscoMemoryPoolName,
+                        ciscoMemoryPoolUsed
+                    }
+    STATUS          current
+    DESCRIPTION
+        "This notification is generated when the percentage of free
+        memory in the system has fallen below
+        ciscoMemoryPoolLowMemoryNotifThreshold and when the value of
+        ciscoMemoryPoolLowMemoryNotifEnable is set to 'true'.
+
+        ciscoMemoryPoolName indicates the name of the memory pool for
+        which the notification is being generated.
+
+        ciscoMemoryPoolUsed indicates the used memory in bytes for the
+        memory pool."
+   ::= { ciscoMemoryPoolMIBNotificationPrefix 1 }
+
+ciscoMemoryPoolLowMemoryRecoveryNotif NOTIFICATION-TYPE
+    OBJECTS         {
+                        ciscoMemoryPoolName,
+                        ciscoMemoryPoolUsed
+                    }
+    STATUS          current
+    DESCRIPTION
+        "This notification is generated when the percentage of free
+        memory in the system has returned to
+        ciscoMemoryPoolLowMemoryNotifThreshold after suffering from a
+        low memory. This notification is generated when the value of
+        ciscoMemoryPoolLowMemoryNotifEnable is set to 'true'. This
+        notification is generated as a recovery notification for
+        ciscoMemoryPoolLowMemoryNotif.
+
+        ciscoMemoryPoolName indicates the name of the memory pool for
+        which the notification is being generated.
+
+        ciscoMemoryPoolUsed indicates the used memory in bytes for the
+        memory pool."
+   ::= { ciscoMemoryPoolMIBNotificationPrefix 2 }
+-- conformance information
+
+ciscoMemoryPoolConformance  OBJECT IDENTIFIER
+    ::= { ciscoMemoryPoolMIB 3 }
+
+ciscoMemoryPoolCompliances  OBJECT IDENTIFIER
+    ::= { ciscoMemoryPoolConformance 1 }
+
+ciscoMemoryPoolGroups  OBJECT IDENTIFIER
+    ::= { ciscoMemoryPoolConformance 2 }
+
+
+-- compliance statements
+
+ciscoMemoryPoolCompliance MODULE-COMPLIANCE
+    STATUS          deprecated
+    DESCRIPTION
+        "The compliance statement for entities which implement
+        the Cisco Memory Pool MIB"
+    MODULE          -- this module
+    MANDATORY-GROUPS { ciscoMemoryPoolGroup }
+    ::= { ciscoMemoryPoolCompliances 1 }
+
+ciscoMemoryPoolComplianceRev1 MODULE-COMPLIANCE
+    STATUS          deprecated
+    DESCRIPTION
+        "The compliance statement for entities which implement
+        the Cisco Memory Pool MIB"
+    MODULE          -- this module
+    MANDATORY-GROUPS { ciscoMemoryPoolGroup }
+
+    GROUP           ciscoMemoryPoolUtilizationGroup
+    DESCRIPTION
+        "Per memory pool utilization statistics is mandatory for
+        the managed system that supports memory pool utilization."
+    ::= { ciscoMemoryPoolCompliances 2 }
+
+ciscoMemoryPoolComplianceRev2 MODULE-COMPLIANCE
+    STATUS          current
+    DESCRIPTION
+        "The compliance statement for entities which implement
+        the Cisco Memory Pool MIB"
+    MODULE          -- this module
+    MANDATORY-GROUPS { ciscoMemoryPoolGroupRev1 }
+
+    GROUP           ciscoMemoryPoolUtilizationGroup
+    DESCRIPTION
+        "Per memory pool utilization statistics is mandatory for
+        the managed system that supports memory pool utilization."
+
+    GROUP           ciscoMemoryPoolNotificationGroup
+    DESCRIPTION
+        "ciscoMemoryPoolNotificationGroup is mandatory for the managed
+        system that supports memory pool notifications."
+
+    GROUP           ciscoMemoryPoolNotificationCtrlGroup
+    DESCRIPTION
+        "ciscoMemoryPoolNotificationCtrlGroup is mandatory for the
+        managed system that supports memory pool notifications."
+    ::= { ciscoMemoryPoolCompliances 3 }
+
+-- units of conformance
+
+ciscoMemoryPoolGroup OBJECT-GROUP
+    OBJECTS         {
+                        ciscoMemoryPoolName,
+                        ciscoMemoryPoolAlternate,
+                        ciscoMemoryPoolValid,
+                        ciscoMemoryPoolUsed,
+                        ciscoMemoryPoolFree,
+                        ciscoMemoryPoolLargestFree
+                    }
+    STATUS          deprecated
+    DESCRIPTION
+        "A collection of objects providing memory pool monitoring."
+    ::= { ciscoMemoryPoolGroups 1 }
+
+ciscoMemoryPoolUtilizationGroup OBJECT-GROUP
+    OBJECTS         {
+                        ciscoMemoryPoolUtilization1Min,
+                        ciscoMemoryPoolUtilization5Min,
+                        ciscoMemoryPoolUtilization10Min
+                    }
+    STATUS          current
+    DESCRIPTION
+        "An optional group providing a collection of memory pool
+        utilization objects."
+    ::= { ciscoMemoryPoolGroups 2 }
+
+ciscoMemoryPoolNotificationGroup NOTIFICATION-GROUP
+   NOTIFICATIONS    {
+                        ciscoMemoryPoolLowMemoryNotif,
+                        ciscoMemoryPoolLowMemoryRecoveryNotif
+                    }
+    STATUS          current
+    DESCRIPTION
+        "A collection of all the notifications supported in the
+        CISCO-MEMORY-POOL-MIB."
+    ::= { ciscoMemoryPoolGroups 3 }
+
+ciscoMemoryPoolNotificationCtrlGroup OBJECT-GROUP
+    OBJECTS         { ciscoMemoryPoolLowMemoryNotifEnable }
+    STATUS          current
+    DESCRIPTION
+        "A collection of all the notification control objects."
+    ::= { ciscoMemoryPoolGroups 4 }
+
+ciscoMemoryPoolGroupRev1 OBJECT-GROUP
+    OBJECTS         {
+                        ciscoMemoryPoolName,
+                        ciscoMemoryPoolAlternate,
+                        ciscoMemoryPoolValid,
+                        ciscoMemoryPoolUsed,
+                        ciscoMemoryPoolFree,
+                        ciscoMemoryPoolLargestFree,
+                        ciscoMemoryPoolLowMemoryNotifThreshold
+                    }
+    STATUS          current
+    DESCRIPTION
+        "A collection of objects providing memory pool monitoring."
+    ::= { ciscoMemoryPoolGroups 5 }
+
+END
+
+
+
+
+
+
+
+
+
+