diff options
| author | David Leutgeb <david.leutgeb@mannundmouse.com> | 2023-12-05 12:25:34 +0100 |
|---|---|---|
| committer | David Leutgeb <david.leutgeb@mannundmouse.com> | 2023-12-05 12:25:34 +0100 |
| commit | 98a672123c7872f6b9b75a9a2b6bb3aea504de6a (patch) | |
| tree | 9b13bd7f563c3198047bd359195327cf28b3caf0 /MIBS/cisco/CISCO-IGMP-SNOOPING-MIB | |
| download | mibs-98a672123c7872f6b9b75a9a2b6bb3aea504de6a.tar.gz mibs-98a672123c7872f6b9b75a9a2b6bb3aea504de6a.zip | |
Diffstat (limited to 'MIBS/cisco/CISCO-IGMP-SNOOPING-MIB')
| -rw-r--r-- | MIBS/cisco/CISCO-IGMP-SNOOPING-MIB | 3948 |
1 files changed, 3948 insertions, 0 deletions
diff --git a/MIBS/cisco/CISCO-IGMP-SNOOPING-MIB b/MIBS/cisco/CISCO-IGMP-SNOOPING-MIB new file mode 100644 index 0000000..a12abbe --- /dev/null +++ b/MIBS/cisco/CISCO-IGMP-SNOOPING-MIB @@ -0,0 +1,3948 @@ +-- *************************************************************** +-- CISCO-IGMP-SNOOPING-MIB: MIB for IGMP Snooping Configuration. +-- +-- May 2002, Binh P Le +-- +-- Copyright (c) 2002, 2007-2010 by Cisco Systems Inc. +-- +-- All rights reserved. +-- *************************************************************** + +CISCO-IGMP-SNOOPING-MIB DEFINITIONS ::= BEGIN + +IMPORTS + OBJECT-TYPE, + MODULE-IDENTITY, + Counter32, + Unsigned32, + Integer32 + FROM SNMPv2-SMI + MODULE-COMPLIANCE, + OBJECT-GROUP + FROM SNMPv2-CONF + TruthValue, + TimeStamp, + TEXTUAL-CONVENTION, + StorageType, + RowStatus + FROM SNMPv2-TC + ifIndex, + InterfaceIndex + FROM IF-MIB + InetAddressType, + InetAddress + FROM INET-ADDRESS-MIB + SnmpAdminString + FROM SNMP-FRAMEWORK-MIB + VlanIndex + FROM CISCO-VTP-MIB + CiscoPortList, + CiscoPortListRange + FROM CISCO-TC + Percent + FROM CISCO-QOS-PIB-MIB + VlanIndexOrZero + FROM CISCO-PRIVATE-VLAN-MIB + ciscoMgmt + FROM CISCO-SMI; + + +ciscoIgmpSnoopingMIB MODULE-IDENTITY + LAST-UPDATED "201006080000Z" + ORGANIZATION "Cisco System, Inc." + CONTACT-INFO + "Cisco Systems + Customer Service + + Postal: 170 W Tasman Drive + San Jose, CA 95134 + USA + + Tel: +1 800 553-NETS + + E-mail: cs-lan-switch-snmp@cisco.com, + cs-ipmulticast@cisco.com" + DESCRIPTION + "The MIB module for IGMP Snooping feature. + + Internet Group Management Protocol (IGMP) is the protocol used + by IPv4 end hosts to indicate their interest in receiving + multicast traffic for certain multicast groups to neighboring + multicast routers. Version 3 of IGMP adds support for source + based filtering; which means the end hosts can specifically + indicate to receive or not-receive multicast packets from + specific source addresses. This information is used by the + multicast routers to restrict forwarding of multicast traffic + for the host. + + IGMP Snooping is a switch protocol. A switch that implements + IGMP Snooping listens to the IGMP messages exchanged between + the hosts and router, then provides selective transmission of + multicast traffic based on multicast mac destination address + or multicast group address. With IGMPv3 support, + IGMP Snooping can potentially provide selective transmission + of multicast data based on (source address, group address) + onto the ports that are interested. In addition to this, + IGMP Snooping can also provide proxy reporting, report + suppression and fast leave capabilities." + REVISION "201006080000Z" + DESCRIPTION + "Added support for the following: + + - cisLeaveQueryConfigGroup + - cisQuerierGlobalConfigGroup + - cisIgmpQuerierConfigExtGroup + - cisRobustnessConfigGroup + - cisTimeToLiveConfigGroup + - cisRouterAlertConfigGroup + - cisVlanExplicitTrackingCfgGroup + - cisIfLimitGroup + - cisIfLimitTotalGroup + - cisIfAccessGroupGroup + - cisVlanFilterConfigGroup + - cisFilterStatisticsGroup + - cisMulticastGroupPortInfoGroup + - cisMulticastGroupConfigGroup + - cisQuerierGlobalTcnQueryCountGroup + - cisQuerierTcnQueryPendingGroup + + Deprecated cisMcastRouterConfigGroup and replaced it with + cisMulticastRouterConfigGroup. Deprecated + cisMcastGroupInfoGroup and replaced it with + cisMulticastGroupInfoGroup. + + Updated DESCRIPTION of cisL2EntryLimit, cisEntryTrackingLimit, + cisSourceOnlyPercentageScanLimit and cisSourceOnlyLearningLimit + to include the meaning of value zero. + + Revised the DESCRIPTION of cisVlanConfigEntry and + cisIgmpQuerierEntry." + REVISION "200711080000Z" + DESCRIPTION + "Added value 'unknown(4)' to CisIgmpVersion. + + Added support for the following: + - cisL2EntryLimitGroup + - cisTrackingLimitGroup + - cisSourceOnlyLimitGroup + - cisRateLimitGroup2 + - cisVlanConfigGroup2 + - cisSourceOnlyAgeTimerInSecGroup. + + Deprecated cisRateLimitGroup, + cisGlobalSourceOnlyLearnGroup." + REVISION "200404020000Z" + DESCRIPTION + "Replaced the import of PortList from Q-BRIDGE-MIB with + CiscoPortList from CISCO-TC." + REVISION "200303240000Z" + DESCRIPTION + "Add support for the following: + - per VLAN IGMP Snooping configuration and group + membership information + - per port IGMP Snooping configuration + - per VLAN IGMP Querier configuration + - global rate-limit control objects + - extend the cisSystemInfo to include more IGMP Snooping + configuration related objects." + REVISION "200205050000Z" + DESCRIPTION + "Initial version of this MIB module." + ::= { ciscoMgmt 263 } + + + +-- Textual Conventions + +CisIgmpMode ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "A value that represents a working mode of IGMP protocol in a + device. + + auto(1) : The system decides the working mode by itself. + + igmpOnly(2): Working on IGMP mode only. + + igmpCgmp(3): Working on both IGMP and CGMP modes." + SYNTAX INTEGER { + auto(1), + igmpOnly(2), + igmpCgmp(3) + } + +CisIgmpVersion ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "A value that represents the version of IGMP: + + version1(1) : Version 1 of IGMP + version2(2) : Version 2 of IGMP + version3(3) : Version 3 of IGMP + unknown(4) : Version of IGMP is not determined." + SYNTAX INTEGER { + version1(1), + version2(2), + version3(3), + unknown(4) + } +ciscoIgmpSnoopingNotification OBJECT IDENTIFIER + ::= { ciscoIgmpSnoopingMIB 0 } + +ciscoIgmpSnoopingMIBObject OBJECT IDENTIFIER + ::= { ciscoIgmpSnoopingMIB 1 } + +cisSystemInfo OBJECT IDENTIFIER + ::= { ciscoIgmpSnoopingMIBObject 1 } + +cisStatisticsInfo OBJECT IDENTIFIER + ::= { ciscoIgmpSnoopingMIBObject 2 } + +cisRateLimitInfo OBJECT IDENTIFIER + ::= { ciscoIgmpSnoopingMIBObject 3 } + +cisVlanConfigInfo OBJECT IDENTIFIER + ::= { ciscoIgmpSnoopingMIBObject 4 } + +cisIfConfigInfo OBJECT IDENTIFIER + ::= { ciscoIgmpSnoopingMIBObject 5 } + +cisMulticastRouterInfo OBJECT IDENTIFIER + ::= { ciscoIgmpSnoopingMIBObject 6 } + +cisMulticastGroupInfo OBJECT IDENTIFIER + ::= { ciscoIgmpSnoopingMIBObject 7 } + +cisResourceLimitInfo OBJECT IDENTIFIER + ::= { ciscoIgmpSnoopingMIBObject 8 } + +cisQuerierConfigInfo OBJECT IDENTIFIER + ::= { ciscoIgmpSnoopingMIBObject 9 } + +cisFilteringInfo OBJECT IDENTIFIER + ::= { ciscoIgmpSnoopingMIBObject 10 } + +cisExplicitTrackingInfo OBJECT IDENTIFIER + ::= { ciscoIgmpSnoopingMIBObject 11 } + + +-- ------------------------------------------------------------ +-- - The cisSystemInfo group. +-- ------------------------------------------------------------ + +cisIgmpSnoopingEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object indicates whether IGMP Snooping has been + enabled for the system." + ::= { cisSystemInfo 1 } + +cisV3ProcessEnabledAdminStatus OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object indicates the administrative status of IGMP v3 + processing in the system. With the condition that IGMP + protocol has been enabled, a system will process IGMPv3 + messages if this object is set to 'true', or it will process + only IGMPv1/v2 messages if this object is set to 'false'." + ::= { cisSystemInfo 2 } + +cisV3ProcessEnabledOperStatus OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object indicates the current operational status of IGMP + v3 processing in the system. This object is enabled if the + system is operating with IGMPv3 protocol. Value of this object + will be set to 'true' if the system is operating in IGMP v3, + and 'false' if it is operating in IGMPv1/v2." + ::= { cisSystemInfo 3 } + +cisFastLeaveEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object indicates whether Fast-Leave mechanism has been + configured to be enabled in the system. If Fast-Leave is + enabled in the switch, IGMP Snooping will prune the port on + which an IGMP leave message has been received without waiting + for the Group Specific Query to timeout to determine whether + there are any more hosts on that port for that group. If + the value of cisV3ProcessEnabledOperStatus is 'false', + this object will not have any effect." + ::= { cisSystemInfo 4 } + +cisFastBlockEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The object indicates whether Fast-Block mechanism has been + enabled for the system. This object only has effect if the + value of cisV3ProcessEnabledOperStatus is 'true'." + ::= { cisSystemInfo 5 } + +cisAdminMode OBJECT-TYPE + SYNTAX CisIgmpMode + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The object indicates the administrative snooping mode of IGMP + Snooping feature, depends on whether only IGMP devices, or + also CGMP devices are existing in the network." + ::= { cisSystemInfo 6 } + +cisOperMode OBJECT-TYPE + SYNTAX CisIgmpMode + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The object indicates the operational snooping mode of the + device. The object should return igmpOnly(2) or igmpCgmp(3) + only. Value of this object is meaningful only if the value + of cisIgmpSnoopingEnabled is 'true'." + ::= { cisSystemInfo 7 } + +cisLeaveQueryType OBJECT-TYPE + SYNTAX INTEGER { + generalQuery(1), + macGenQuery(2), + auto(3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The object indicates the type of IGMP-leave query that the + device will send on the interface the IGMP-leave message was + received. + + generalQuery(1) : A General Query will be sent to all hosts + connecting to that interface. + + macGenQuery(2) : A MAC-Based General Query will be sent to all + hosts in multicast groups that are associated + with the MAC-level address. MAC-Based General + Query is not a standard, it is a part of CGMP + (Cisco Group Management Protocol). + + auto(3) : A Group-Specific query will be sent if there + are no IGMPv1 hosts detected in the network. + Otherwise a MAC-Based General Query will be + sent." + ::= { cisSystemInfo 8 } + +cisAddressAliasingMode OBJECT-TYPE + SYNTAX INTEGER { + normal(1), + fallback(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The object indicates the current IGMP Address Aliasing Mode of + the device. + + normal(1) : IGMP is working in normal mode without detecting + address aliasing. + fallback(2): address aliasing is detected. The device stops + listening to the multicast control traffic and stays + in the fallback mode for an expiry time before + getting back to the normal mode." + ::= { cisSystemInfo 9 } + +cisFallbackTime OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The object indicates the time the IGMP address aliasing mode + is fallback(2)." + ::= { cisSystemInfo 10 } + +cisReportSuppressionEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "When this object is set to 'true', IGMP Snooping will + suppress duplicate IGMP Reports. When this object is set + to 'false', all IGMP Reports are forwarded to all multicast + routers in the VLAN." + ::= { cisSystemInfo 11 } + +cisTopoChangeFloodQueryCount OBJECT-TYPE + SYNTAX Unsigned32 (1..10) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object specifies the flooding period for multicast + traffic upon receiving Topology Change Notifications (TCN). + IGMP Snooping will flood multicast traffic until + cisTopoChangeFloodQueryCount number of IGMP General Queries + are received by IGMP Snooping." + ::= { cisSystemInfo 12 } + +cisTopoChangeQuerySolicitEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object specifies whether the device running IGMP + Snooping will solicit IGMP General Queries from the + Querier upon receiving a Topology Change Notification (TCN). + The root device will always solicit IGMP General Queries + on TCN irrespective of the value of + cisTopoChangeQuerySolicitEnabled." + ::= { cisSystemInfo 13 } + +cisSourceOnlyLearningEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object specifies whether Source Only multicast entries + are learned by IGMP Snooping or not." + ::= { cisSystemInfo 14 } + +cisSourceOnlyEntryAgeTime OBJECT-TYPE + SYNTAX Integer32 (0..2880) + UNITS "minutes" + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "This object specifies the aging time for Source Only + multicast entries when cisSourceOnlyLearningEnabled is + set to 'true'. When cisSourceOnlyEntryAgeTime is set to + 0, aging is disabled. This object is deprecated and + replaced by 'cisSourceOnlyEntryAgingTime'." + ::= { cisSystemInfo 15 } + +cisV3SnoopingSupport OBJECT-TYPE + SYNTAX INTEGER { + basic(1), + full(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object indicates IGMP Snooping support for + IGMPv3 as described below: + basic(1): Basic support for IGMPv3. IGMPv3 packets are + processed similar to IGMPv2 packets. In other words + Source list information is not used. Although this + does not break multicast traffic to IGMPv3 hosts, + it does not provide any other benefits such as Fast + Leave for IGMPv3 hosts, Explicit Host Tracking and + Source based filtering. + full(2): Full support for IGMPv3. Provides full IGMPv3 + Snooping support. This includes processing of + IGMPv3 source list information along with group + information. Provides support for features such + as Fast Leave, Explicit Host Tracking and Proxy + Reporting and a potential to do Source based + filtering. + The value of this object is valid only when + cisV3ProcessEnabledAdminStatus is set to 'true'." + ::= { cisSystemInfo 16 } + +cisSourceOnlyEntryAgingTime OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "seconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object specifies the aging time in seconds for Source + Only multicast entries when cisSourceOnlyLearningEnabled is + set to 'true'. When cisSourceOnlyEntryAgingTime is set to + 0, aging is disabled." + ::= { cisSystemInfo 17 } + +cisRobustnessVariable OBJECT-TYPE + SYNTAX Unsigned32 (1..7) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies the Robustness Variable of this device. This + value will be used at each VLAN if the corresponding + instance of cisVlanRobustnessVariable is not configured." + REFERENCE "RFC 3376, 8.1" + ::= { cisSystemInfo 18 } + +cisLastMemberQueryInterval OBJECT-TYPE + SYNTAX Unsigned32 (1..4294967295) + UNITS "milliseconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies the IGMP Last Member Query Interval of this device. + This value will be used at each VLAN if the corresponding + instance of cisVlanLeaveQueryInterval is not configured." + REFERENCE "RFC 3376, 8.8" + ::= { cisSystemInfo 19 } + +cisLastMemberQueryCount OBJECT-TYPE + SYNTAX Unsigned32 (1..4294967295) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies the Last Member Query Count value of this + device. This value will be used at each VLAN if the + corresponding instance of cisVlanLastMemberQueryCount is + not configured." + ::= { cisSystemInfo 20 } + +cisTimeToLiveCheckEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies whether Time-To-Live (TTL) check is enabled when + processing IGMP packets in the system. + + Setting this object to 'false' disables TTL check when + processing IGMP packets in the system. + + Setting this object to 'true' enables TTL check, whether TTL + check for IGMP packets on each VLAN is done or not is + controlled by the corresponding instance of + cisVlanTimeToLiveCheckEnabled." + ::= { cisSystemInfo 21 } + +cisRouterAlertCheckEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies whether checking of Router-Alert option is enabled + for IGMP traffic in the system. + + Setting this object to 'false' disables Router-Alert check in + the system. + + Setting this object to 'true' enables Router-Alert check, + whether Router-Alert check is performed at each VLAN is + controlled by the corresponding instance of + cisVlanRouterAlertCheckEnabled." + ::= { cisSystemInfo 22 } +-- ---------------------------------------- +-- - The cisStatisticsInfo group. +-- ---------------------------------------- + +cisInterfaceStatsTable OBJECT-TYPE + SYNTAX SEQUENCE OF CisInterfaceStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table contains statistics information for IGMP Snooping. An + entry appears in this table for each IGMP Snooping capable + interface in the device." + ::= { cisStatisticsInfo 1 } + +cisInterfaceStatsEntry OBJECT-TYPE + SYNTAX CisInterfaceStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry contains statistics information for a specific IGMP + Snooping capable interface. It provides information about + IGMP messages and reports that have been transmitted and + received at the interface." + INDEX { ifIndex } + ::= { cisInterfaceStatsTable 1 } + +CisInterfaceStatsEntry ::= SEQUENCE { + cisTxGeneralQueries Counter32, + cisTxGroupSpecificQueries Counter32, + cisTxReports Counter32, + cisTxLeaves Counter32, + cisRxGeneralQueries Counter32, + cisRxGroupSpecificQueries Counter32, + cisRxReports Counter32, + cisRxLeaves Counter32, + cisRxValidPackets Counter32, + cisRxInvalidPackets Counter32, + cisRxOtherPackets Counter32, + cisRxMACGeneralQueries Counter32, + cisRxTopoNotifications Counter32, + cisV3Allows Counter32, + cisV3Blocks Counter32, + cisV3IsIncluded Counter32, + cisV3IsExcluded Counter32, + cisV3ToIncluded Counter32, + cisV3ToExcluded Counter32 +} + +cisTxGeneralQueries OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Total IGMP General Queries that have been transmitted through + an interface." + ::= { cisInterfaceStatsEntry 1 } + +cisTxGroupSpecificQueries OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Total IGMP Group-Specific Queries that have been transmitted + through an interface." + ::= { cisInterfaceStatsEntry 2 } + +cisTxReports OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Total IGMP Membership Reports that have been transmitted + through an interface." + ::= { cisInterfaceStatsEntry 3 } + +cisTxLeaves OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Total IGMP Leave messages that have been transmitted through + an interface." + ::= { cisInterfaceStatsEntry 4 } + +cisRxGeneralQueries OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Total IGMP General Queries that have been received at an + interface." + ::= { cisInterfaceStatsEntry 5 } + +cisRxGroupSpecificQueries OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Total IGMP Group-Specific Queries that have been received at + an interface." + ::= { cisInterfaceStatsEntry 6 } + +cisRxReports OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Total IGMP Membership Reports that have been received at an + interface." + ::= { cisInterfaceStatsEntry 7 } + +cisRxLeaves OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Total IGMP Leave messages that have been received at an + interface." + ::= { cisInterfaceStatsEntry 8 } + +cisRxValidPackets OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Total valid IGMP packets have been received at an interface." + ::= { cisInterfaceStatsEntry 9 } + +cisRxInvalidPackets OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Total packets those are not valid IGMP messages received + at an interface." + ::= { cisInterfaceStatsEntry 10 } + +cisRxOtherPackets OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Total non IGMP messages messages that have been received + at an interface, comprising cgmp join, pim hello, dvmrp + and mospf messages." + ::= { cisInterfaceStatsEntry 11 } + +cisRxMACGeneralQueries OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Total MAC-based General Queries that have been received at + an interface." + ::= { cisInterfaceStatsEntry 12 } + +cisRxTopoNotifications OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Total Topology Change Notifications that have been received + at an interface." + ::= { cisInterfaceStatsEntry 13 } + +cisV3Allows OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of Source-List-Change records with the record type + ALLOW_NEW_SOURCES that have been sent from hosts connected + to an interface. This record type indicates that the Source + Address fields in this Group Record contain a list of + additional sources that the system wishes to hear from, for + packets sent to the specified multicast address." + ::= { cisInterfaceStatsEntry 14 } + +cisV3Blocks OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of Source-List-Change records with the record type + BLOCK_OLD_SOURCE that have been sent from hosts connected to + an interface. This record type indicates that the Source + Address fields in this Group Record contain a list of the + sources that the system no longer wishes to hear from, for + packets sent to the specified multicast address." + ::= { cisInterfaceStatsEntry 15 } + +cisV3IsIncluded OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of Current-State records with the state MODE_IS_INCLUDE + that have been sent from hosts in response to a Query received + at an interface. This state indicates that the interface has a + filter mode of INCLUDE for the specified multicast address." + ::= { cisInterfaceStatsEntry 16 } + +cisV3IsExcluded OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of Current-State records with the state MODE_IS_EXCLUDE + that have been sent from hosts in response to a Query received + at an interfaces. This state indicates that the interface has a + filter mode of EXCLUDE for the specified multicast address." + ::= { cisInterfaceStatsEntry 17 } + +cisV3ToIncluded OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of Filter-Mode-Change records with the record type + CHANGE_TO_INCLUDE_MODE that have been sent through an + interface. This type of record indicates that the filter mode + has been changed to INCLUDE mode for the specified multicast + address, and the Source Address fields in this Group Record + will contain the new source list for the specified multicast + address, if it is not empty." + ::= { cisInterfaceStatsEntry 18 } + +cisV3ToExcluded OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of Filter-Mode-Change records with the record type + CHANGE_TO_EXCLUDE_MODE that have been sent through an + interface. This type of record indicates that the filter mode + has been changed to EXCLUDE mode for the specified multicast + address, and the Source Address fields in this Group Record + will contain the new source list for the specified multicast + address, if it is not empty." + ::= { cisInterfaceStatsEntry 19 } + + + +-- ---------------------------------------- +-- The cisRateLimitInfo group. +-- ---------------------------------------- + +cisGeneralQueryRateLimit OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "packets per 30 seconds" + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "Rate limit for General-Query packets per 30 seconds from + a control plane address. If the packets exceed the rate, + snooping will be stalled for a period of 30 seconds." + ::= { cisRateLimitInfo 1 } + +cisDvmrpRateLimit OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "packets per 30 seconds" + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "Rate limit for DVMRP packets per 30 seconds from + a control plane address. If the packets exceed the rate, + snooping will be stalled for a period of 30 second." + ::= { cisRateLimitInfo 2 } + +cisMospf1RateLimit OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "packets per 30 seconds" + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "Rate limit for MOSPF1 packets per 30 seconds from + a control plane address. If the packets exceed the rate, + snooping will be stalled for a period of 30 second." + ::= { cisRateLimitInfo 3 } + +cisMospf2RateLimit OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "packets per 30 seconds" + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "Rate limit for MOSPF2 packets per 30 seconds from + a control plane address. If the packets exceed the rate, + snooping will be stalled for a period of 30 second." + ::= { cisRateLimitInfo 4 } + +cisPimV2RateLimit OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "packets per 30 seconds" + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "Rate limit for PIMv2 packets per 30 seconds from + a control plane address. If the packets exceed the rate, + snooping will be stalled for a period of 30 second." + ::= { cisRateLimitInfo 5 } + +cisRateLimit OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "packets per second" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Rate limit for incoming IGMP messages in packets per seconds, + applied to each VLAN in the system. IGMP Snooping will be + disabled on the corresponding VLAN if IGMP message incoming + rate exceeds the limit, then enabled back automatically once + IGMP join message rate is below the limit indicated by the + corresponding instance value of this object. Setting value + zero to this object means no limitation on IGMP incoming + message rate." + ::= { cisRateLimitInfo 6 } +-- ---------------------------------------- +-- - The cisVlanConfigInfo group. +-- ---------------------------------------- + +cisVlanConfigTable OBJECT-TYPE + SYNTAX SEQUENCE OF CisVlanConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table contains VLAN based configuration information + for IGMP Snooping." + ::= { cisVlanConfigInfo 1 } + +cisVlanConfigEntry OBJECT-TYPE + SYNTAX CisVlanConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry is created for each IGMP Snooping capable VLAN + found in the device. An entry is removed if such VLAN + becomes IGMP Snooping incapable or has been removed." + INDEX { cisVlanIndex } + ::= { cisVlanConfigTable 1 } + +CisVlanConfigEntry ::= SEQUENCE { + cisVlanIndex VlanIndex, + cisVlanIgmpSnoopingEnabled TruthValue, + cisVlanFastLeaveEnabled TruthValue, + cisVlanIgmpSnoopingOperMode CisIgmpMode, + cisVlanIgmpSnoopingLearningMode INTEGER, + cisVlanReportSuppressionEnabled TruthValue, + cisVlanLeaveQueryInterval Unsigned32, + cisVlanLastMemberQueryCount Unsigned32, + cisVlanRobustnessVariable Unsigned32, + cisVlanTimeToLiveCheckEnabled TruthValue, + cisVlanRouterAlertCheckEnabled TruthValue +} + +cisVlanIndex OBJECT-TYPE + SYNTAX VlanIndex + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This object indicates the VLAN in which IGMP Snooping + is configured." + ::= { cisVlanConfigEntry 1 } + +cisVlanIgmpSnoopingEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "When this object is set to 'true' IGMP Snooping + is enabled on this VLAN else disabled." + ::= { cisVlanConfigEntry 2 } + +cisVlanFastLeaveEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object specifies whether Fast-Leave mechanism + (also known as Immediate-Leave) is to be performed by IGMP + Snooping or not. When enabled, IGMP Snooping will remove + the interface from the group mentioned in the IGMP Leave + message received on that interface without waiting for the + IGMP Group-Specific Query to timeout to determine whether + there are any more hosts on that interface for that group." + ::= { cisVlanConfigEntry 3 } + +cisVlanIgmpSnoopingOperMode OBJECT-TYPE + SYNTAX CisIgmpMode + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The object indicates the operational mode of IGMP Snooping. + The object should return igmpOnly(2) or igmpCgmp(3) only." + ::= { cisVlanConfigEntry 4 } + +cisVlanIgmpSnoopingLearningMode OBJECT-TYPE + SYNTAX INTEGER { + pimDvmrp(1), + cgmp(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object specifies the multicast router port learning + method for IGMP Snooping as described below: + pimDvmrp(1) : Protocol Independent Multicast / Distance Vector + Multicast Routing Protocol. + cgmp(2) : Cisco Group Management Protocol." + ::= { cisVlanConfigEntry 5 } + +cisVlanReportSuppressionEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object specifies whether Report Suppression is enabled + for this VLAN." + ::= { cisVlanConfigEntry 6 } + +cisVlanLeaveQueryInterval OBJECT-TYPE + SYNTAX Unsigned32 (0 | 1..4294967295) + UNITS "milliseconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies the IGMP Last Member Query Interval of this VLAN. + + Value of zero for this object indicates that IGMP leave timer + is not configured for this VLAN. In that case, IGMP leave + timer used in this VLAN is indicated by the value of + cisLastMemberQueryInterval." + ::= { cisVlanConfigEntry 7 } + +cisVlanLastMemberQueryCount OBJECT-TYPE + SYNTAX Unsigned32 (0 | 1..4294967295) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object specifies the Last Member Query Count for this + VLAN. + + Value of zero for this object indicates that Last Member + Query Count is not configured for the VLAN. In that case, + Last Member Query Count used in this VLAN is indicated by the + value of cisLastMemberQueryCount." + ::= { cisVlanConfigEntry 8 } + +cisVlanRobustnessVariable OBJECT-TYPE + SYNTAX Unsigned32 (0 | 1..7) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This objects specifies the Robustness Variable for this VLAN. + + Value of zero for this object indicates that Robustness + Variable is not configured for the VLAN. In that case, + Robustness Variable used in this VLAN is indicated by the + value of cisRobustnessVariable." + REFERENCE "RFC 3376, 8.1" + ::= { cisVlanConfigEntry 9 } + +cisVlanTimeToLiveCheckEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This objects specifies whether TTL check is enabled on this + VLAN. + + Setting this object will only take effect when + cisTimeToLiveCheckEnabled is 'true'." + ::= { cisVlanConfigEntry 10 } + +cisVlanRouterAlertCheckEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This objects specifies whether checking of Router-Alert option + is enabled for IGMP traffic in this VLAN. + + Setting this object will only take effect when + cisRouterAlertCheckEnabled is 'true'." + ::= { cisVlanConfigEntry 11 } + + + +cisIgmpQuerierTable OBJECT-TYPE + SYNTAX SEQUENCE OF CisIgmpQuerierEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table containing information regarding the IGMP Querier in + the VLAN. The device can be configured to be the IGMP Querier + for the VLAN. An IGMP Querier for the VLAN is selected by + using a Querier Election process." + ::= { cisVlanConfigInfo 2 } + +cisIgmpQuerierEntry OBJECT-TYPE + SYNTAX CisIgmpQuerierEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry is created for each IGMP Snooping capable VLAN + found in the device. An entry is removed if such VLAN + becomes IGMP Snooping incapable or has been removed." + INDEX { cisIgmpQuerierVlanIndex } + ::= { cisIgmpQuerierTable 1 } + +CisIgmpQuerierEntry ::= SEQUENCE { + cisIgmpQuerierVlanIndex VlanIndex, + cisIgmpQuerierEnabled TruthValue, + cisIgmpQuerierState INTEGER, + cisIgmpQuerierVersion CisIgmpVersion, + cisIgmpQuerierAddressType InetAddressType, + cisIgmpQuerierAddress InetAddress, + cisIgmpQuerierInterface InterfaceIndex, + cisIgmpQuerierTcnQueryCount Unsigned32, + cisIgmpQuerierTcnQueryInterval Unsigned32, + cisIgmpQuerierTimerExpiry Unsigned32, + cisIgmpQuerierMaxResponseTime Unsigned32, + cisIgmpQuerierQueryInterval Unsigned32, + cisIgmpQuerierAdminAddressType InetAddressType, + cisIgmpQuerierAdminAddress InetAddress, + cisIgmpQuerierAdminVersion CisIgmpVersion, + cisIgmpQuerierTcnQueryPending Counter32 +} + +cisIgmpQuerierVlanIndex OBJECT-TYPE + SYNTAX VlanIndex + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The object indicates the VLAN that the Querier will send + IGMP queries on." + ::= { cisIgmpQuerierEntry 1 } + +cisIgmpQuerierEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object specifies whether IGMP Snooping Querier function + is enabled on the VLAN. Setting this object to 'enable' will + enable IGMP Snooping Querier function on this VLAN; Setting + this object to 'false' will disable IGMP Snooping Querier + function on this VLAN. Setting this object will only take effect + when cisQuerierEnabled is 'true'. + + If IGMP Snooping Querier election is enabled in the system, this + object also controls whether the device will participate in + the IGMP Querier election in a VLAN. If the object is set + to 'true', the device will participate to an election + process to be a Querier. If the object is set to 'false' + while the device is acting as the Querier in a VLAN, a new + election will be activated to choose a different Querier." + ::= { cisIgmpQuerierEntry 2 } + +cisIgmpQuerierState OBJECT-TYPE + SYNTAX INTEGER { + disabled(1), + electing(2), + querier(3), + nonQuerier(4), + inactive(5) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The object indicates the current state of the device as an + IGMP Querier in a VLAN. + + disabled(1) : Querier function is disabled for this device + in this VLAN. + electing(2) : The device is in the election process of the + Querier. + querier(3) : The device is the current Querier in this + VLAN. + nonQuerier(4): The device has lost the election process of + the Querier. + inactive(5) : VLAN is inactive or not an Ethernet VLAN." + ::= { cisIgmpQuerierEntry 3 } + +cisIgmpQuerierVersion OBJECT-TYPE + SYNTAX CisIgmpVersion + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The object indicates the operational IGMP version of the + Querier for the VLAN. IGMP version of the Querier is + determined by the type of IGMP General Query received by + the device." + REFERENCE "RFC 3376" + ::= { cisIgmpQuerierEntry 4 } + +cisIgmpQuerierAddressType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The object indicates IP address type of the IGMP Querier + for the VLAN." + ::= { cisIgmpQuerierEntry 5 } + +cisIgmpQuerierAddress OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The object indicates the operational IP address of the IGMP + Querier for the VLAN." + ::= { cisIgmpQuerierEntry 6 } + +cisIgmpQuerierInterface OBJECT-TYPE + SYNTAX InterfaceIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The object indicates the interface on which IGMP Querier is + detected for the VLAN. The value of this object is zero + if the device itself is acting as IGMP Querier for the VLAN." + ::= { cisIgmpQuerierEntry 7 } + +cisIgmpQuerierTcnQueryCount OBJECT-TYPE + SYNTAX Unsigned32 (0 | 1..4294967295) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies the number of TCN queries to be executed upon + receiving TCN on this VLAN. + + Value of zero for this object indicates that querier TCN query + count is not configured for the VLAN." + ::= { cisIgmpQuerierEntry 8 } + +cisIgmpQuerierTcnQueryInterval OBJECT-TYPE + SYNTAX Unsigned32 (0 | 1..4294967295) + UNITS "seconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies the TCN query interval time for this VLAN. + + Value of zero for this object indicates that querier + TCN query interval is not configured for the VLAN. In that + case, querier TCN query interval used in this VLAN is + indicated by the value of cisQuerierTcnQueryInterval." + ::= { cisIgmpQuerierEntry 9 } + +cisIgmpQuerierTimerExpiry OBJECT-TYPE + SYNTAX Unsigned32 (0 | 1..4294967295) + UNITS "seconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies the querier expiration timer on this VLAN. + + Value of zero for this object indicates that querier + expiration timer is not configured for the VLAN. In that + case, querier expiration timer used in this VLAN is + indicated by the value of cisQuerierTimerExpiry." + ::= { cisIgmpQuerierEntry 10 } + +cisIgmpQuerierMaxResponseTime OBJECT-TYPE + SYNTAX Unsigned32 (0 | 1..4294967295) + UNITS "seconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies the Max Response Time value of queries generated + by IGMP Snooping Querier on this VLAN. + + Value of zero for this object indicates that querier Max + Response Time is not configured for the VLAN. In that case, + querier Max Response Time used in this VLAN is indicated + by the value of cisQuerierMaxResponseTime." + ::= { cisIgmpQuerierEntry 11 } + +cisIgmpQuerierQueryInterval OBJECT-TYPE + SYNTAX Unsigned32 (0 | 1..4294967295) + UNITS "seconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies the interval between IGMP Queries to this VLAN. + + Value of zero for this object indicates that querier + query interval is not configured for the VLAN. In that case, + querier query interval used in this VLAN is indicated by + the value of cisQuerierQueryInterval." + ::= { cisIgmpQuerierEntry 12 } + +cisIgmpQuerierAdminAddressType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies the administrative IP address type of the IGMP + Querier of this VLAN." + ::= { cisIgmpQuerierEntry 13 } + +cisIgmpQuerierAdminAddress OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies the administrative Internet address of the + IGMP Querier of this VLAN, when IGMP Snooping Querier + function is enabled on this VLAN. The type of this + address is determined by the value of + cisIgmpQuerierAdminAddressType." + ::= { cisIgmpQuerierEntry 14 } + +cisIgmpQuerierAdminVersion OBJECT-TYPE + SYNTAX CisIgmpVersion + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies the administrative version of the IGMP version + that the Querier feature uses on this VLAN. + + Value 'unknown' indicates that the administrative version is + not configured for IGMP Querier on this VLAN." + ::= { cisIgmpQuerierEntry 15 } + +cisIgmpQuerierTcnQueryPending OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the remaining TCN queries in respond to TCN on this + VLAN." + ::= { cisIgmpQuerierEntry 16 } + + +-- ---------------------------------------- +-- - The cisIfConfigInfo group. +-- ---------------------------------------- + +cisIfConfigTable OBJECT-TYPE + SYNTAX SEQUENCE OF CisIfConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table containing configuration information for IGMP + Snooping on capable Layer two interfaces." + ::= { cisIfConfigInfo 1 } + +cisIfConfigEntry OBJECT-TYPE + SYNTAX CisIfConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry is created for each Layer two interface + capable of being flood with multicast traffic by IGMP + Snooping." + INDEX { ifIndex } + ::= { cisIfConfigTable 1 } + +CisIfConfigEntry ::= SEQUENCE { + cisIfTopoChangeFloodEnabled TruthValue +} + +cisIfTopoChangeFloodEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "When this object is set to 'true' multicast traffic will be + flooded on the port for cisTopoChangeFloodQueryCount of Igmp + General Queries upon receiving a Topology Change + Notification (TCN) for the VLAN to which the port belongs." + ::= { cisIfConfigEntry 1 } + + +-- ------------------------------------------------------ +-- The cisMulticastRouterInfo group. +-- ------------------------------------------------------ + +cisMcastRouterCfgTable OBJECT-TYPE + SYNTAX SEQUENCE OF CisMcastRouterCfgEntry + MAX-ACCESS not-accessible + STATUS deprecated + DESCRIPTION + "Table containing multicast router configuration information + for IGMP Snooping. This table is deprecated and replaced by + cisMcastRouterConfigTable." + ::= { cisMulticastRouterInfo 1 } + +cisMcastRouterCfgEntry OBJECT-TYPE + SYNTAX CisMcastRouterCfgEntry + MAX-ACCESS not-accessible + STATUS deprecated + DESCRIPTION + "An entry is created for each interface in the VLAN that is + either learned or configured as multicast router port. + A multicast router port is learned using the method + specified by cisVlanIgmpSnoopingLearningMode." + INDEX { + ifIndex, + cisMcastRouterVlanIndex + } + ::= { cisMcastRouterCfgTable 1 } + +CisMcastRouterCfgEntry ::= SEQUENCE { + cisMcastRouterVlanIndex VlanIndex, + cisMcastRouterType INTEGER, + cisMcastRouterRowStatus RowStatus +} + +cisMcastRouterVlanIndex OBJECT-TYPE + SYNTAX VlanIndex + MAX-ACCESS not-accessible + STATUS deprecated + DESCRIPTION + "This object indicates the VLAN to which the multicast router + port belongs." + ::= { cisMcastRouterCfgEntry 1 } + +cisMcastRouterType OBJECT-TYPE + SYNTAX INTEGER { + static(1), + dynamic(2) + } + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "This object indicates if the multicast router port is + a configured (static) or learned (dynamic) port." + ::= { cisMcastRouterCfgEntry 2 } + +cisMcastRouterRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS deprecated + DESCRIPTION + "This object is a conceptual row entry that allows to add + or delete entries to or from the cisMcastRouterCfgTable. + When creating an entry in this table 'createAndGo' method + is used and the value of this object is set to 'active'. + Deactivation of an 'active' entry is not allowed. When + deleting an entry in this table 'destroy' method is + used." + ::= { cisMcastRouterCfgEntry 3 } + + + +cisMcastRouterConfigTable OBJECT-TYPE + SYNTAX SEQUENCE OF CisMcastRouterConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table containing a list of multicast router used by IGMP + snooping. An entry is created for every multicast router + learnt by the system. An entry can also be created + manually by user. Only entries which are manually created + can be deleted from the table." + ::= { cisMulticastRouterInfo 2 } + +cisMcastRouterConfigEntry OBJECT-TYPE + SYNTAX CisMcastRouterConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A set of configuration and information regarding a single + multicast router." + INDEX { + cisMcastRouterConfigVlanIndex, + ifIndex + } + ::= { cisMcastRouterConfigTable 1 } + +CisMcastRouterConfigEntry ::= SEQUENCE { + cisMcastRouterConfigVlanIndex VlanIndex, + cisMcastRouterConfigRouterType INTEGER, + cisMcastRouterConfigStorageType StorageType, + cisMcastRouterConfigRowStatus RowStatus +} + +cisMcastRouterConfigVlanIndex OBJECT-TYPE + SYNTAX VlanIndex + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This object indicates the VLAN to which the multicast router + port belongs." + ::= { cisMcastRouterConfigEntry 1 } + +cisMcastRouterConfigRouterType OBJECT-TYPE + SYNTAX INTEGER { + static(1), + dynamic(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object indicates type of the multicast router. + + static: the multicast router is configured manually. + + dynamic: the multicast router is learned by the system." + ::= { cisMcastRouterConfigEntry 2 } + +cisMcastRouterConfigStorageType OBJECT-TYPE + SYNTAX StorageType + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object specifies the storage type of this conceptual + row." + DEFVAL { volatile } + ::= { cisMcastRouterConfigEntry 3 } + +cisMcastRouterConfigRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object is used to manage creation, deletion and + modification of rows in this table. + + Once a row becomes active, value in any column within + such row can not be modified." + ::= { cisMcastRouterConfigEntry 4 } + + +-- ---------------------------------------- +-- The cisMulticastGroupInfo group. +-- ---------------------------------------- + +cisMcastGroupTable OBJECT-TYPE + SYNTAX SEQUENCE OF CisMcastGroupEntry + MAX-ACCESS not-accessible + STATUS deprecated + DESCRIPTION + "Table containing multicast group address information for + IGMP Snooping." + ::= { cisMulticastGroupInfo 1 } + +cisMcastGroupEntry OBJECT-TYPE + SYNTAX CisMcastGroupEntry + MAX-ACCESS not-accessible + STATUS deprecated + DESCRIPTION + "An entry is created by IGMP Snooping for each group learned + in the VLAN." + INDEX { + cisMcastGroupVlanIndex, + cisMcastGroupAddressType, + cisMcastGroupAddress + } + ::= { cisMcastGroupTable 1 } + +CisMcastGroupEntry ::= SEQUENCE { + cisMcastGroupVlanIndex VlanIndex, + cisMcastGroupAddressType InetAddressType, + cisMcastGroupAddress InetAddress, + cisMcastGroupFilterMode INTEGER, + cisMcastGroupIgmpVersion CisIgmpVersion, + cisMcastGroupIncludeHostCount Counter32, + cisMcastGroupExcludeHostCount Counter32, + cisMcastGroupPortList CiscoPortList +} + +cisMcastGroupVlanIndex OBJECT-TYPE + SYNTAX VlanIndex + MAX-ACCESS not-accessible + STATUS deprecated + DESCRIPTION + "This object indicates the VLAN in which the group is learned." + ::= { cisMcastGroupEntry 1 } + +cisMcastGroupAddressType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS not-accessible + STATUS deprecated + DESCRIPTION + "This object indicates IP multicast address type learned + by IGMP Snooping." + ::= { cisMcastGroupEntry 2 } + +cisMcastGroupAddress OBJECT-TYPE + SYNTAX InetAddress (SIZE (1..32)) + MAX-ACCESS not-accessible + STATUS deprecated + DESCRIPTION + "This object indicates IP multicast address learned by + IGMP Snooping." + ::= { cisMcastGroupEntry 3 } + +cisMcastGroupFilterMode OBJECT-TYPE + SYNTAX INTEGER { + include(1), + exclude(2) + } + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "This object indicates the IGMP filter mode for this group. + + include(1) : reception of multicast packets sent to the group + specified by cisMcastGroupAddress is requested + only from the specified IPv4 source addresses + listed in the IGMPv3 Membership Reports. + exclude(2) : reception of multicast packets sent to the group + specified by cisMcastGroupAddress is requested + from all except from the list of IPv4 source + addresses specified in the IGMPv3 Membership + Reports. + + The filter mode is determined by the type of Group Record + received in the IGMP Membership Report received by the + device. Groups for which IGMPv1/v2 Membership Reports + are received are considered to have a cisMcastGroupFilterMode + of 'exclude'." + REFERENCE "RFC 3376" + ::= { cisMcastGroupEntry 4 } + +cisMcastGroupIgmpVersion OBJECT-TYPE + SYNTAX CisIgmpVersion + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "This object indicates the IGMP version for the group. + This is determined by the type of IGMP Membership Report + received by the device." + ::= { cisMcastGroupEntry 5 } + +cisMcastGroupIncludeHostCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "This object indicates the number of hosts that + are in INCLUDE mode for the group." + ::= { cisMcastGroupEntry 6 } + +cisMcastGroupExcludeHostCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "This object indicates the number of hosts that + are in EXCLUDE mode for the group." + ::= { cisMcastGroupEntry 7 } + +cisMcastGroupPortList OBJECT-TYPE + SYNTAX CiscoPortList + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "This object indicates the set of ports on which IGMP + Membership Reports are received for the group indicating + interest to receive traffic sent to the group." + ::= { cisMcastGroupEntry 8 } + + + +cisMulticastGroupTable OBJECT-TYPE + SYNTAX SEQUENCE OF CisMulticastGroupEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table containing a list of multicast group information for + IGMP Snooping." + ::= { cisMulticastGroupInfo 2 } + +cisMulticastGroupEntry OBJECT-TYPE + SYNTAX CisMulticastGroupEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry of multicast group in the system. An entry is created + for each group learned or configured in the system." + INDEX { + cisMulticastGroupVlanIndex, + cisMulticastGroupCeVlanIndex, + cisMulticastGroupAddressType, + cisMulticastGroupAddress, + cisMulticastGroupSourceAddress + } + ::= { cisMulticastGroupTable 1 } + +CisMulticastGroupEntry ::= SEQUENCE { + cisMulticastGroupVlanIndex VlanIndex, + cisMulticastGroupCeVlanIndex VlanIndex, + cisMulticastGroupAddressType InetAddressType, + cisMulticastGroupAddress InetAddress, + cisMulticastGroupSourceAddress InetAddress, + cisMulticastGroupGroupType INTEGER, + cisMulticastGroupIgmpVersion BITS, + cisMulticastGroupSourceUpTime Unsigned32, + cisMulticastGroupSourceExpires Unsigned32, + cisMulticastGroupInclHostCount Counter32, + cisMulticastGroupExclHostCount Counter32 +} + +cisMulticastGroupVlanIndex OBJECT-TYPE + SYNTAX VlanIndex + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This object indicates the VLAN in which the group is + learned or configured." + ::= { cisMulticastGroupEntry 1 } + +cisMulticastGroupCeVlanIndex OBJECT-TYPE + SYNTAX VlanIndex + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This object indicates the Customer Equipment (CE) VLAN in + which the group is learned or configured." + ::= { cisMulticastGroupEntry 2 } + +cisMulticastGroupAddressType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This object indicates the type of Internet address of + the multicast group and source in this entry." + ::= { cisMulticastGroupEntry 3 } + +cisMulticastGroupAddress OBJECT-TYPE + SYNTAX InetAddress (SIZE (1..48)) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This object indicates IP multicast address of the group. Type + of this address is indicated by cisMulticastGroupAddressType." + ::= { cisMulticastGroupEntry 4 } + +cisMulticastGroupSourceAddress OBJECT-TYPE + SYNTAX InetAddress (SIZE (1..48)) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This object indicates IP address of the source of the multicast + traffic. Value of zero for this object indicates that the + multicast traffic of the group indicated by the corresponding + instance of cisMulticastGroupAddress can come from any source. + Type of this address is indicated by + cisMulticastGroupAddressType." + ::= { cisMulticastGroupEntry 5 } + +cisMulticastGroupGroupType OBJECT-TYPE + SYNTAX INTEGER { + dynamic(1), + static(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object indicates whether this multicast group is learned + or manually configured on the device. + + dynamic(1): this multicast group is learned from multicast + traffic on this VLAN. + static(2) : this multicast group is manually configured on the + device. + + The group type is set to 'static' unconditionally if a port is + joining that group via configuration." + ::= { cisMulticastGroupEntry 6 } + +cisMulticastGroupIgmpVersion OBJECT-TYPE + SYNTAX BITS { + igmpV1(0), + igmpV2(1), + igmpV3(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object indicates the versions of IGMP packets received + from this group." + ::= { cisMulticastGroupEntry 7 } + +cisMulticastGroupSourceUpTime OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object indicates the time (in seconds) since this source + started sending multicast data for the multicast group." + ::= { cisMulticastGroupEntry 8 } + +cisMulticastGroupSourceExpires OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object indicates the time (in seconds) the association of + this source and the multicast group will be expired, if there is + no host interests in receiving multicast data from it. + + This object has the value zero when value of the corresponding + object cisMulticastGroupGroupType is 'static'." + ::= { cisMulticastGroupEntry 9 } + +cisMulticastGroupInclHostCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object indicates the number of hosts that are in + INCLUDE mode for the group." + ::= { cisMulticastGroupEntry 10 } + +cisMulticastGroupExclHostCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object indicates the number of hosts that are in + EXCLUDE mode for the group." + ::= { cisMulticastGroupEntry 11 } + + + +cisMulticastGroupPortListTable OBJECT-TYPE + SYNTAX SEQUENCE OF CisMulticastGroupPortListEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table containing a list of ports joining multicast groups." + ::= { cisMulticastGroupInfo 3 } + +cisMulticastGroupPortListEntry OBJECT-TYPE + SYNTAX CisMulticastGroupPortListEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing a list of ports joining a multicast group." + INDEX { + cisMulticastGroupVlanIndex, + cisMulticastGroupCeVlanIndex, + cisMulticastGroupAddressType, + cisMulticastGroupAddress, + cisMulticastGroupSourceAddress, + cisMulticastGroupPortRangeIndex + } + ::= { cisMulticastGroupPortListTable 1 } + +CisMulticastGroupPortListEntry ::= SEQUENCE { + cisMulticastGroupPortRangeIndex CiscoPortListRange, + cisMulticastGroupPortList CiscoPortList +} + +cisMulticastGroupPortRangeIndex OBJECT-TYPE + SYNTAX CiscoPortListRange + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This object indicates the bridge-port range of this row." + ::= { cisMulticastGroupPortListEntry 1 } + +cisMulticastGroupPortList OBJECT-TYPE + SYNTAX CiscoPortList + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The set of ports that joining a multicast group. It has + the information of up to 2k ports with the port number + starting from the information indicated in + cisMcastPortRangeIndex object of the same row. For example, + if the value of cisMcastPortRangeIndex is 'twoKto4K', the + port number indicated in this object starting from 2049 + and ending to 4096. + + A port number is the value of dot1dBasePort for the port in + the BRIDGE-MIB (RFC 4188)." + ::= { cisMulticastGroupPortListEntry 2 } + + + +cisMulticastGroupConfigTable OBJECT-TYPE + SYNTAX SEQUENCE OF CisMulticastGroupConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of configured multicast group and associated ports + in the system." + ::= { cisMulticastGroupInfo 4 } + +cisMulticastGroupConfigEntry OBJECT-TYPE + SYNTAX CisMulticastGroupConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry of multicast group and its associated ports, which + is configured manually." + INDEX { + cisMulticastGroupConfVlanIndex, + cisMulticastGroupConfCeVlanIndex, + cisMulticastGroupConfAddressType, + cisMulticastGroupConfAddress, + cisMulticastGroupConfSourceAddress, + cisMulticastGroupConfPortRange + } + ::= { cisMulticastGroupConfigTable 1 } + +CisMulticastGroupConfigEntry ::= SEQUENCE { + cisMulticastGroupConfVlanIndex VlanIndex, + cisMulticastGroupConfCeVlanIndex VlanIndex, + cisMulticastGroupConfAddressType InetAddressType, + cisMulticastGroupConfAddress InetAddress, + cisMulticastGroupConfSourceAddress InetAddress, + cisMulticastGroupConfPortRange CiscoPortListRange, + cisMulticastGroupConfPortList CiscoPortList, + cisMulticastGroupConfStorageType StorageType, + cisMulticastGroupConfRowStatus RowStatus +} + +cisMulticastGroupConfVlanIndex OBJECT-TYPE + SYNTAX VlanIndex + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This object specifies the VLAN in which the group is + configured." + ::= { cisMulticastGroupConfigEntry 1 } + +cisMulticastGroupConfCeVlanIndex OBJECT-TYPE + SYNTAX VlanIndex + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This object specifies the Customer Equipment (CE) VLAN in + which the group is configured." + ::= { cisMulticastGroupConfigEntry 2 } + +cisMulticastGroupConfAddressType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This object specifies the type of Internet address of + multicast group and source in this entry." + ::= { cisMulticastGroupConfigEntry 3 } + +cisMulticastGroupConfAddress OBJECT-TYPE + SYNTAX InetAddress (SIZE (1..48)) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This object specifies IP address of the multicast group. + Type of this address is indicated by + cisMulticastGroupConfAddressType." + ::= { cisMulticastGroupConfigEntry 4 } + +cisMulticastGroupConfSourceAddress OBJECT-TYPE + SYNTAX InetAddress (SIZE (1..48)) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This object specifies the IP address of the source of the + multicast traffic for this group. Value of zero for this + object indicates that the multicast traffic of this group can + come from any source. Type of this address is indicated by + cisMulticastGroupConfAddressType." + ::= { cisMulticastGroupConfigEntry 5 } + +cisMulticastGroupConfPortRange OBJECT-TYPE + SYNTAX CiscoPortListRange + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This object specifies the bridge-port range of this row.." + ::= { cisMulticastGroupConfigEntry 6 } + +cisMulticastGroupConfPortList OBJECT-TYPE + SYNTAX CiscoPortList + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The set of ports that are configured to join a multicast + group. It has the information of up to 2k ports with the + port number starting from the information indicated in + cisMcastPortRangeIndex object of the same row. For + example, if the value of cisMulticastGroupConfPortRange is + 'twoKto4K', the port number indicated in this object starting + from 2049 and ending to 4096. + + A port number is the value of dot1dBasePort for the port + in the BRIDGE-MIB (RFC 4188)." + ::= { cisMulticastGroupConfigEntry 7 } + +cisMulticastGroupConfStorageType OBJECT-TYPE + SYNTAX StorageType + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object specifies the storage type of this conceptual + row." + DEFVAL { volatile } + ::= { cisMulticastGroupConfigEntry 8 } + +cisMulticastGroupConfRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object is used to manage creation, deletion and + modification of rows in this table. + + Once a row becomes active, value in any column within + such row can not be modified." + ::= { cisMulticastGroupConfigEntry 9 } + + + +-- ----------------------------------------- +-- cisResourceLimitInfo groups +-- ----------------------------------------- + +cisL2EntryLimit OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies the maximum number of Layer 2 multicast entries + that IGMP Snooping can install in the Layer 2 forwarding + table. For multicast groups not being installed in the + Layer 2 forwarding table due to exceeding the limitation, + their traffic will be flooded within the VLAN. + + Value of zero for this object indicates that there is no + limitation on the number of Layer 2 multicast entries + which can be installed in the Layer 2 forwarding table." + ::= { cisResourceLimitInfo 1 } + +cisEntryTrackingLimit OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies the maximum number of entries that can be installed + in the tracking database. + + Value of zero for this object indicates that no entry can + be installed to the tracking database." + ::= { cisResourceLimitInfo 2 } + +cisSourceOnlyPercentageScanLimit OBJECT-TYPE + SYNTAX Percent + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies the percentage of IGMP Snooping Source Only + entries to be processed in each Source Only timeout + period, in which they will be timed out in batches. + Entries not processed due to this limitation will + remain in the Layer 2 forwarding table. + + Value of zero for this object indicates that Source Only + entries scan will not be performed." + ::= { cisResourceLimitInfo 3 } + +cisSourceOnlyLearningLimit OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies the maximum number of Layer 2 multicast Source + Only entries that IGMP Snooping can install in the Layer 2 + forwarding table. If the number of multicast Source Only + groups in the system exceeds this limit, snooping entries + will not be installed for the over-limit groups and Source + Only traffic for these groups will be flooded within the + VLAN. + + Value of zero for this object indicates that there is no + limitation on the number of Source Only entries which can be + installed in the Layer 2 forwarding table." + ::= { cisResourceLimitInfo 4 } + +-- ---------------------------------------- +-- cisQuerierConfigInfo +-- ---------------------------------------- + +cisQuerierEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies if IGMP Snooping Querier function is globally + enabled at the device level. + + Setting this object to 'false' disabled IGMP Snooping + Querier function globally, thus disabling the feature at + each VLAN. + + Setting this object to 'true' enables IGMP Snooping Querier + in the system, whether the feature is running at each VLAN + or not is controlled by the corresponding entry in + cisIgmpQuerierTable." + ::= { cisQuerierConfigInfo 1 } + +cisQuerierTcnQueryInterval OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "seconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies the TCN query interval time when the device is + acting as the active querier. This value will be used at each + VLAN if value of the corresponding instance of + cisIgmpQuerierTcnQueryInterval is not configured." + ::= { cisQuerierConfigInfo 2 } + +cisQuerierTimerExpiry OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "seconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies the querier expiration timer. This value will + be used at each VLAN if value of the corresponding + instance of cisIgmpQuerierTimerExpiry is not configured." + ::= { cisQuerierConfigInfo 3 } + +cisQuerierMaxResponseTime OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "one-tenth of second" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies the Max Response Time value of queries generated + by IGMP Snooping Querier. This value will be used at each + VLAN if value of the corresponding instance of + cisIgmpQuerierMaxResponseTime is not configured." + REFERENCE "RFC 3376" + ::= { cisQuerierConfigInfo 4 } + +cisQuerierQueryInterval OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "seconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies the interval between IGMP queries. This value + will be used at each VLAN if value of the corresponding + instance of cisIgmpQuerierQueryInterval is not configured." + ::= { cisQuerierConfigInfo 5 } + +cisQuerierAddressType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object indicates the type of Internet address of + the IGMP Querier associating with this device when it is + acting as an IGMP Snooping Querier." + ::= { cisQuerierConfigInfo 6 } + +cisQuerierAddress OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies the Internet address of the IGMP Querier associating + with this device when it is acting as an IGMP Snooping Querier. + This address will be used by IGMP Snooping Querier feature at + each VLAN if no corresponding IGMP Snooping Querier is + configured for that VLAN. The type of this address is determined + by value of cisQuerierAddressType object." + ::= { cisQuerierConfigInfo 7 } + +cisQuerierVersion OBJECT-TYPE + SYNTAX CisIgmpVersion + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies the IGMP version that the Querier feature uses. + This value will be used at each VLAN if value of the + corresponding instance of cisIgmpQuerierAdminVersion is + 'unknown'." + ::= { cisQuerierConfigInfo 8 } + +cisQuerierTcnQueryCount OBJECT-TYPE + SYNTAX Unsigned32 (1..4294967295) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies the number of TCN queries to be executed upon + receiving TCN, when the device is acting as the active + querier. This value will be used at each VLAN if value of + the corresponding instance of cisVlanQuerierTcnQueryCount + is not configured." + ::= { cisQuerierConfigInfo 9 } +-- ----------------------------------------------------------------- +-- cisFilteringInfo +-- +-- IGMP Snooping filters provides mechanisms to control the +-- propagation of IGMP traffic through the network. By managing IGMP +-- traffic, IGMP filtering provides the capability to manage IGMP +-- snooping, which in turn controls the forwarding of multicast +-- traffic. +-- +-- When an IGMP packet is received, IGMP Snooping uses the configured +-- filters to determine whether the IGMP packet should be discarded or +-- allowed to be processed. With an IGMP version 1 or version 2 packet, +-- the entire packet is discarded. With a IGMPv3 packet, the packet is +-- rewritten to remove message elements that were denied by the +-- filters. +-- ----------------------------------------------------------------- + +cisIfLimitTable OBJECT-TYPE + SYNTAX SEQUENCE OF CisIfLimitEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table containing a list of IGMP Snooping limit filters." + ::= { cisFilteringInfo 1 } + +cisIfLimitEntry OBJECT-TYPE + SYNTAX CisIfLimitEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Entry containing IGMP Snooping limit filters. A limit + filter can be applied on a Layer2 interface, and VLAN(s) carried + by the interface when it is in trunk mode." + INDEX { + ifIndex, + cisIfLimitVlanNumber + } + ::= { cisIfLimitTable 1 } + +CisIfLimitEntry ::= SEQUENCE { + cisIfLimitVlanNumber VlanIndexOrZero, + cisIfLimitMax Unsigned32, + cisIfLimitExcludeAccessGrp SnmpAdminString, + cisIfLimitStorageType StorageType, + cisIfLimitRowStatus RowStatus +} + +cisIfLimitVlanNumber OBJECT-TYPE + SYNTAX VlanIndexOrZero + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Specifies the VLAN which IGMP Snooping filters configured in + this entry will be applied on when the interface is in trunk + mode. Value of zero indicates that the corresponding filters + are applicable to every VLAN carried by the trunk when the + interface is in trunk mode, or the interface itself if it is + in not in trunk mode." + ::= { cisIfLimitEntry 1 } + +cisIfLimitMax OBJECT-TYPE + SYNTAX Unsigned32 (1..2147483647) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Specifies the maximum number of IGMP group and channels that + allowed on the interaface, or VLAN(s) carried by the interface + if it is in trunk mode." + ::= { cisIfLimitEntry 2 } + +cisIfLimitExcludeAccessGrp OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Specifies the access group that is excluded from the filter + configured via cisIfLimitMax." + DEFVAL { "" } + ::= { cisIfLimitEntry 3 } + +cisIfLimitStorageType OBJECT-TYPE + SYNTAX StorageType + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Specifies the storage type of this conceptual row." + DEFVAL { volatile } + ::= { cisIfLimitEntry 4 } + +cisIfLimitRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object is used to manage creation, deletion and + modification of rows in this table. + + All writable objects in this row may be modified at any time." + ::= { cisIfLimitEntry 5 } + + + +cisIfLimitTotalTable OBJECT-TYPE + SYNTAX SEQUENCE OF CisIfLimitTotalEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table containing a list of IGMP Snooping total limit + filters." + ::= { cisFilteringInfo 2 } + +cisIfLimitTotalEntry OBJECT-TYPE + SYNTAX CisIfLimitTotalEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Entry containing IGMP Snooping total limit filters for a + Layer 2 interface." + INDEX { ifIndex } + ::= { cisIfLimitTotalTable 1 } + +CisIfLimitTotalEntry ::= SEQUENCE { + cisIfLimitTotalLimitMax Unsigned32, + cisIfLimitTotalExcludeAccessGrp SnmpAdminString, + cisIfLimitTotalStorageType StorageType, + cisIfLimitTotalRowStatus RowStatus +} + +cisIfLimitTotalLimitMax OBJECT-TYPE + SYNTAX Unsigned32 (1..2147483647) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Specifies the maximum total number of IGMP group or channels + that allows on all VLANs carried by the interaface when it is + in trunk mode." + ::= { cisIfLimitTotalEntry 1 } + +cisIfLimitTotalExcludeAccessGrp OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Specifies the access group that is excluded from the + limitation specified by cisIfToltalLimitChannelsAllowed." + ::= { cisIfLimitTotalEntry 2 } + +cisIfLimitTotalStorageType OBJECT-TYPE + SYNTAX StorageType + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Specifies the storage type of this conceptual row." + DEFVAL { volatile } + ::= { cisIfLimitTotalEntry 3 } + +cisIfLimitTotalRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object is used to manage creation, deletion and + modification of rows in this table. + + All writable objects in this row may be modified at any time." + ::= { cisIfLimitTotalEntry 4 } + + + +cisIfAccessGroupTable OBJECT-TYPE + SYNTAX SEQUENCE OF CisIfAccessGroupEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table containing a list of IGMP Snooping filters based on + access-group." + ::= { cisFilteringInfo 3 } + +cisIfAccessGroupEntry OBJECT-TYPE + SYNTAX CisIfAccessGroupEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An IGMP Snooping access-group filter, containing an access + control list describing which IGMP groups or channels can be + joined on the interface, and/or on which specific VLAN(s) the + filter should be applied when the interface is in trunk mode." + INDEX { + ifIndex, + cisIfAccessGroupVlan + } + ::= { cisIfAccessGroupTable 1 } + +CisIfAccessGroupEntry ::= SEQUENCE { + cisIfAccessGroupVlan VlanIndexOrZero, + cisIfAccessGroupsChannelsAllowed SnmpAdminString, + cisIfAccessGroupStorageType StorageType, + cisIfAccessGroupRowStatus RowStatus +} + +cisIfAccessGroupVlan OBJECT-TYPE + SYNTAX VlanIndexOrZero + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Specifies the VLAN which IGMP Snooping filters configured in + this entry will be applied on when the interface is in trunk + mode. Value of zero indicates that the corresponding filters + are applicable to every VLAN carried by the trunk when the + interface is in trunk mode, or the interface itself if it is + in not in trunk mode." + ::= { cisIfAccessGroupEntry 1 } + +cisIfAccessGroupsChannelsAllowed OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (1..255)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Specifies the access group to indicate which IGMP groups or + channels can be joined." + ::= { cisIfAccessGroupEntry 2 } + +cisIfAccessGroupStorageType OBJECT-TYPE + SYNTAX StorageType + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Specifies the storage type of this conceptual row." + DEFVAL { volatile } + ::= { cisIfAccessGroupEntry 3 } + +cisIfAccessGroupRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object is used to manage creation, deletion and + modification of rows in this table. + + Once a row becomes active, value in any column within + such row can not be modified." + ::= { cisIfAccessGroupEntry 4 } + + + +cisVlanFilterConfigTable OBJECT-TYPE + SYNTAX SEQUENCE OF CisVlanFilterConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table containing a list of VLAN. An entry will exist for + each VLAN which supports IGMP Snooping feature." + ::= { cisFilteringInfo 4 } + +cisVlanFilterConfigEntry OBJECT-TYPE + SYNTAX CisVlanFilterConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Entry containing IGMP Snooping filters configuration for + a particular VLAN." + INDEX { cisVlanIndex } + ::= { cisVlanFilterConfigTable 1 } + +CisVlanFilterConfigEntry ::= SEQUENCE { + cisVlanFilterAccessGroup SnmpAdminString, + cisVlanFilterLimitMax Unsigned32, + cisVlanFilterLimitExclAccessGrp SnmpAdminString, + cisVlanFilterMinVersionAllowed CisIgmpVersion +} + +cisVlanFilterAccessGroup OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies the access group to control which IGMP group or + channels can be joined on this VLAN. + + A zero length string of this instance indicates that there is + no access-group based filter applied to this VLAN." + ::= { cisVlanFilterConfigEntry 1 } + +cisVlanFilterLimitMax OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies the maximum number of IGMP groups or channels that + allows on each switch port in this VLAN, or trunk ports + carrying this VLAN. + + Value of zero indicates that there is no limit of number of IGMP + groups or channels that can be joined on switch ports in this + VLAN, + or trunk ports carrying this VLAN." + ::= { cisVlanFilterConfigEntry 2 } + +cisVlanFilterLimitExclAccessGrp OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies the access group that is excluded from the filter + configured via cisVlanFilterLimitMax." + ::= { cisVlanFilterConfigEntry 3 } + +cisVlanFilterMinVersionAllowed OBJECT-TYPE + SYNTAX CisIgmpVersion + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies the minimum version of IGMP hosts allowed on this + VLAN. + + Value 'unknown' is not configurable for this object." + ::= { cisVlanFilterConfigEntry 4 } + + + +cisFilterStatsTable OBJECT-TYPE + SYNTAX SEQUENCE OF CisFilterStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table containing statistics information about IGMP Snooping + filters in the system. An entry is created for each IGMP + Snooping capable interface in the system, or each VLAN carried + by an interface when it is in trunk mode." + ::= { cisFilteringInfo 5 } + +cisFilterStatsEntry OBJECT-TYPE + SYNTAX CisFilterStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry providing statistic information about IGMP Snooping + filter on an IGMP Snooping capable interface, or on a VLAN that + the interface carries when it is in trunk mode." + INDEX { + ifIndex, + cisFilterStatsVlanNumber + } + ::= { cisFilterStatsTable 1 } + +CisFilterStatsEntry ::= SEQUENCE { + cisFilterStatsVlanNumber VlanIndexOrZero, + cisFilterAccessGroupDenied Counter32, + cisFilterLimitDenied Counter32, + cisFilterTotalLimitDenied Counter32, + cisFilterMinVersionDenied Counter32 +} + +cisFilterStatsVlanNumber OBJECT-TYPE + SYNTAX VlanIndexOrZero + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Indicates the VLAN which the entry provides statistics + information for, when the interface is in trunk mode. + Value of zero indicates that statistics information provided + in this entry is for the interface that is in access-mode." + ::= { cisFilterStatsEntry 1 } + +cisFilterAccessGroupDenied OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the number of join-request denied due to + Access-Group filter on the interface, or on the VLAN + indicated by the value of cisFilterStatsVlanNumber when + the interface is in trunk mode." + ::= { cisFilterStatsEntry 2 } + +cisFilterLimitDenied OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the number of join-request denied due to exceeding + the maximum number of IGMP groups or channels allowed on the + interface, or on the VLAN indicated by the value of + cisFilterStatsVlanNumber when the interface is in trunk mode." + ::= { cisFilterStatsEntry 3 } + +cisFilterTotalLimitDenied OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the number of join-request denied due to exceeding + the maximum number of IGMP groups or channels across + all VLANs on the interface, when it is in trunk mode." + ::= { cisFilterStatsEntry 4 } + +cisFilterMinVersionDenied OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the number of join-request denied due to originating + from hosts with lower than minimum required IGMP version on the + interface." + ::= { cisFilterStatsEntry 5 } + + +-- ---------------------------------------- +-- cisExplicitTrackingInfo +-- ---------------------------------------- + +cisVlanExplicitTrackingTable OBJECT-TYPE + SYNTAX SEQUENCE OF CisVlanExplicitTrackingEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table containing configuration information of Explicit Tracking + for IGMP in the system. Explicit Tracking allows the device to + track the IGMP membership status of all hosts in the system that + respond to IGMP Membership Queries. Tracking information is + used to build the explicit-tracking database to serve for + fast-leave processing for IGMPv3 hosts, proxy reporting and + statistic collection. + + An entry is created for each IGMP Snooping capable VLAN found in + the device." + ::= { cisExplicitTrackingInfo 1 } + +cisVlanExplicitTrackingEntry OBJECT-TYPE + SYNTAX CisVlanExplicitTrackingEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry of Explicit Tracking configuration for a corresponding + VLAN." + INDEX { cisVlanIndex } + ::= { cisVlanExplicitTrackingTable 1 } + +CisVlanExplicitTrackingEntry ::= SEQUENCE { + cisVlanExplicitTrackingEnabled TruthValue, + cisVlanExplicitTrackingLimit Integer32 +} + +cisVlanExplicitTrackingEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object specifies whether Explicit Tracking is enabled + on this VLAN." + ::= { cisVlanExplicitTrackingEntry 1 } + +cisVlanExplicitTrackingLimit OBJECT-TYPE + SYNTAX Integer32 (-1 | 0 | 2147483647) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object specifies the maximum number of entries that can + be installed in the explicit-tracking database for this VLAN. + + Value of zero for this object indicates that tracking + information for this VLAN will not be installed to the + explicit-tracking database for this VLAN. + + Value of -1 for this object indicates that there is no limitation + on the number of entries that can be installed to the + explicit-tracking database for this VLAN." + ::= { cisVlanExplicitTrackingEntry 2 } + + +-- ----------------------------------------- +-- Conformance Information +-- ----------------------------------------- + +cisMIBConformance OBJECT IDENTIFIER + ::= { ciscoIgmpSnoopingMIB 2 } + +cisMIBCompliances OBJECT IDENTIFIER + ::= { cisMIBConformance 1 } + +cisMIBGroups OBJECT IDENTIFIER + ::= { cisMIBConformance 2 } + + +-- Compliance statements + +cisV2Compliance MODULE-COMPLIANCE + STATUS deprecated + DESCRIPTION + "The compliance statement for device support IGMPv1/v2 + Snooping protocol." + MODULE -- this module + MANDATORY-GROUPS { cisSystemGroup } + + GROUP cisSystemV2Group + DESCRIPTION + "This group is mandatory in systems that support + global configuration for IGMPv2 Snooping feature." + + GROUP cisStatsGroup + DESCRIPTION + "This group is optional, and should be implemented if the + system provides statistics information for IGMP Snooping + protocol version 1 and 2." + ::= { cisMIBCompliances 1 } + +cisV3Compliance MODULE-COMPLIANCE + STATUS deprecated + DESCRIPTION + "The compliance statement for device support IGMPv3 Snooping + protocol." + MODULE -- this module + MANDATORY-GROUPS { cisSystemGroup } + + GROUP cisSystemV2Group + DESCRIPTION + "This group is mandatory in systems that support global + configuration for IGMPv2 Snooping feature." + + GROUP cisSystemV3Group + DESCRIPTION + "This group is mandatory in systems that support global + configuration for IGMPv3 Snooping feature." + + GROUP cisStatsGroup + DESCRIPTION + "This group is optional, and should be implemented if the + system provides statistics information of IGMP Snooping + protocol version 1 and 2." + + GROUP cisV3StatsGroup + DESCRIPTION + "This group is optional, and should be implemented if the + system provides statistics information of IGMP Snooping + protocol version 3." + ::= { cisMIBCompliances 2 } + +cisIgmpSnoopingMIBCompliance MODULE-COMPLIANCE + STATUS deprecated + DESCRIPTION + "The compliance statement for device supporting + IGMP Snooping.This compliance is deprecated and + superceded by cisIgmpSnoopingMIBCompliance2." + MODULE -- this module + MANDATORY-GROUPS { cisBaseConfigGroup } + + GROUP cisGlobalTcnGroup + DESCRIPTION + "This group is mandatory only for the device that + provides global configuration of Topology Change + Notification (TCN) related parameters." + + GROUP cisGlobalSourceOnlyLearnGroup + DESCRIPTION + "This group is mandatory only for the device that + provides global configuration for Source Only + learning via IGMP Snooping." + + GROUP cisGlobalIgmpV3ConfigGroup + DESCRIPTION + "This group is mandatory only for the device that + provides global configuration for IGMPv3 Snooping." + + GROUP cisGlobalIgmpV3InfoGroup + DESCRIPTION + "This group is optional." + + GROUP cisExtConfig1Group + DESCRIPTION + "This group is optional." + + GROUP cisExtConfig2Group + DESCRIPTION + "This group is optional." + + GROUP cisStatsGroup + DESCRIPTION + "This group is optional, and should be implemented if + the device provides statistics information for IGMP + Snooping for IGMP version 1 and 2." + + GROUP cisV3StatsGroup + DESCRIPTION + "The group is optional, and should be implemented if + the device provides statistics information of IGMP + Snooping for IGMP version 3." + + GROUP cisRateLimitGroup + DESCRIPTION + "This group is optional, and should be implemented if + the device provides configuration information of + rate-limit controls." + + GROUP cisVlanConfigGroup + DESCRIPTION + "This group is mandatory for devices that support IGMP + Snooping configuration per VLAN." + + GROUP cisIgmpQuerierConfigGroup + DESCRIPTION + "This group is optional, and should be implemented if + the device is capable to perform the IGMP Querier + functionality." + + GROUP cisIgmpQuerierInfoGroup + DESCRIPTION + "This group is optional." + + GROUP cisMcastRouterConfigGroup + DESCRIPTION + "This group is optional, and should be implemented if + the device supports Multicast router port management." + + GROUP cisMcastGroupInfoGroup + DESCRIPTION + "This group is optional, and should be implemented if + the device maintains multicast group information." + + GROUP cisIfConfigGroup + DESCRIPTION + "This group is mandatory only for devices that supports + IGMP Snooping configuration on an interface basis." + + OBJECT cisIgmpQuerierAddressType + SYNTAX INTEGER { + ipv4(1) + } + DESCRIPTION + "Only IPv4 addresses need to be supported." + ::= { cisMIBCompliances 3 } + +cisIgmpSnoopingMIBCompliance2 MODULE-COMPLIANCE + STATUS deprecated + DESCRIPTION + "The compliance statement for device supporting + IGMP Snooping." + MODULE -- this module + MANDATORY-GROUPS { cisBaseConfigGroup } + + GROUP cisGlobalTcnGroup + DESCRIPTION + "This group is mandatory only for the device that + provides global configuration of Topology Change + Notification (TCN) related parameters." + + GROUP cisGlobalIgmpV3ConfigGroup + DESCRIPTION + "This group is mandatory only for the device that + provides global configuration for IGMPv3 Snooping." + + GROUP cisGlobalIgmpV3InfoGroup + DESCRIPTION + "This group is optional." + + GROUP cisExtConfig1Group + DESCRIPTION + "This group is optional." + + GROUP cisExtConfig2Group + DESCRIPTION + "This group is optional." + + GROUP cisStatsGroup + DESCRIPTION + "This group is optional, and should be implemented if + the device provides statistics information for IGMP + Snooping for IGMP version 1 and 2." + + GROUP cisV3StatsGroup + DESCRIPTION + "The group is optional, and should be implemented if + the device provides statistics information of IGMP + Snooping for IGMP version 3." + + GROUP cisVlanConfigGroup + DESCRIPTION + "This group is mandatory for devices that support IGMP + Snooping configuration per VLAN." + + GROUP cisIgmpQuerierConfigGroup + DESCRIPTION + "This group is optional, and should be implemented if + the device is capable to perform the IGMP Querier + functionality." + + GROUP cisIgmpQuerierInfoGroup + DESCRIPTION + "This group is optional." + + GROUP cisMcastRouterConfigGroup + DESCRIPTION + "This group is optional, and should be implemented if + the device supports Multicast router port management." + + GROUP cisMcastGroupInfoGroup + DESCRIPTION + "This group is optional, and should be implemented if + the device maintains multicast group information." + + GROUP cisIfConfigGroup + DESCRIPTION + "This group is mandatory only for devices that supports + IGMP Snooping configuration on an interface basis." + + GROUP cisL2EntryLimitGroup + DESCRIPTION + "This group is mandatory only for devices that supports + IGMP Snooping configuration for Layer 2 entry limit." + + GROUP cisTrackingLimitGroup + DESCRIPTION + "This group is mandatory only for devices that supports + configuration for tracking database limitation in IGMP + Snooping." + + GROUP cisSourceOnlyLimitGroup + DESCRIPTION + "This group is mandatory only for devices that support + configuration for Source Only entries in IGMP Snooping." + + GROUP cisRateLimitGroup2 + DESCRIPTION + "This group is mandatory only for devices that support + configuration of packet limit rate in IGMP Snooping." + + GROUP cisVlanConfigGroup2 + DESCRIPTION + "This group is mandatory only for devices that support + per VLAN configuration for Leave Query Interval and + Report Suppression in IGMP Snooping." + + GROUP cisSourceOnlyAgeTimerInSecGroup + DESCRIPTION + "This group ins mandatory only for devices that support + Source Only control and age timer in seconds." + + OBJECT cisIgmpQuerierAddressType + SYNTAX INTEGER { + ipv4(1) + } + DESCRIPTION + "Only IPv4 addresses need to be supported." + ::= { cisMIBCompliances 4 } + +cisIgmpSnoopingMIBCompliance3 MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement for device supporting + IGMP Snooping." + MODULE -- this module + MANDATORY-GROUPS { cisBaseConfigGroup } + + GROUP cisGlobalTcnGroup + DESCRIPTION + "This group is mandatory only for the device that + provides global configuration of Topology Change + Notification (TCN) related parameters." + + GROUP cisGlobalIgmpV3ConfigGroup + DESCRIPTION + "This group is mandatory only for the device that + provides global configuration for IGMPv3 Snooping." + + GROUP cisGlobalIgmpV3InfoGroup + DESCRIPTION + "This group is optional." + + GROUP cisExtConfig1Group + DESCRIPTION + "This group is optional." + + GROUP cisExtConfig2Group + DESCRIPTION + "This group is optional." + + GROUP cisStatsGroup + DESCRIPTION + "This group is optional, and should be implemented if + the device provides statistics information for IGMP + Snooping for IGMP version 1 and 2." + + GROUP cisV3StatsGroup + DESCRIPTION + "The group is optional, and should be implemented if + the device provides statistics information of IGMP + Snooping for IGMP version 3." + + GROUP cisVlanConfigGroup + DESCRIPTION + "This group is mandatory for devices that support IGMP + Snooping configuration per VLAN." + + GROUP cisIgmpQuerierConfigGroup + DESCRIPTION + "This group is optional, and should be implemented if + the device is capable to perform the IGMP Querier + functionality." + + GROUP cisIgmpQuerierInfoGroup + DESCRIPTION + "This group is optional." + + GROUP cisIfConfigGroup + DESCRIPTION + "This group is mandatory only for devices that supports + IGMP Snooping configuration on an interface basis." + + GROUP cisL2EntryLimitGroup + DESCRIPTION + "This group is mandatory only for devices that supports + IGMP Snooping configuration for Layer 2 entry limit." + + GROUP cisTrackingLimitGroup + DESCRIPTION + "This group is mandatory only for devices that supports + configuration for tracking database limitation in IGMP + Snooping." + + GROUP cisSourceOnlyLimitGroup + DESCRIPTION + "This group is mandatory only for devices that support + configuration for Source Only entries in IGMP Snooping." + + GROUP cisRateLimitGroup2 + DESCRIPTION + "This group is mandatory only for devices that support + configuration of packet limit rate in IGMP Snooping." + + GROUP cisVlanConfigGroup2 + DESCRIPTION + "This group is mandatory only for devices that support + per VLAN configuration for Leave Query Interval and + Report Suppression in IGMP Snooping." + + GROUP cisSourceOnlyAgeTimerInSecGroup + DESCRIPTION + "This group is mandatory only for devices that support + Source Only control and age timer in seconds." + + GROUP cisMulticastGroupInfoGroup + DESCRIPTION + "This group is mandatory only for devices that support + Multicast group information in IGMP Snooping." + + GROUP cisMulticastGroupPortInfoGroup + DESCRIPTION + "This group is mandatory only for devices that support + Multicast group information in IGMP Snooping, having more + than 2048 ports in the system." + + GROUP cisMulticastGroupConfigGroup + DESCRIPTION + "This group is mandatory only for devices that support + configuration of Multicast group and joining ports in + IGMP Snooping." + + GROUP cisMulticastRouterConfigGroup + DESCRIPTION + "This group is mandatory only for devices that support + Multicast Router configuration via IGMP Snooping." + + GROUP cisLeaveQueryConfigGroup + DESCRIPTION + "This group is mandatory only for devices that support + Leave-Query configuration for IGMP Snooping." + + GROUP cisQuerierGlobalConfigGroup + DESCRIPTION + "This group is mandatory only for devices that support + global configuration for Querier function." + + GROUP cisIgmpQuerierConfigExtGroup + DESCRIPTION + "This group is mandatory only for devices that support + per-VLAN configuration for Querier function." + + GROUP cisVlanExplicitTrackingCfgGroup + DESCRIPTION + "This group is mandatory only for devices that support + per-VLAN configuration for Explicit Tracking." + + GROUP cisRobustnessConfigGroup + DESCRIPTION + "This group is mandatory only for devices that support + Robustness configuration for IGMP Snooping." + + GROUP cisTimeToLiveConfigGroup + DESCRIPTION + "This group is mandatory only for devices that support + Time-To-Live configuration for IGMP Snooping." + + GROUP cisRouterAlertConfigGroup + DESCRIPTION + "This group is mandatory only for devices that support + Router-Alert configuration for IGMP Snooping." + + GROUP cisIfLimitGroup + DESCRIPTION + "This group is mandatory only for devices that support + limit filter configuration for IGMP Snooping." + + GROUP cisIfLimitTotalGroup + DESCRIPTION + "This group is mandatory only for devices that support + total limit filter configuration for IGMP Snooping." + + GROUP cisIfAccessGroupGroup + DESCRIPTION + "This group is mandatory only for devices that support + access-group filter configuration for IGMP Snooping." + + GROUP cisVlanFilterConfigGroup + DESCRIPTION + "This group is mandatory only for devices that support + VLAN-based filter configuration for IGMP Snooping." + + GROUP cisFilterStatisticsGroup + DESCRIPTION + "This group is mandatory only for devices that provide + filter statistics information for IGMP Snooping." + + GROUP cisQuerierGlobalTcnQueryCountGroup + DESCRIPTION + "This group is mandatory only for devices that support + configuration and information for global querier TCN + query count for IGMP Snooping." + + GROUP cisQuerierTcnQueryPendingGroup + DESCRIPTION + "This group is mandatory only for devices that provide + information about pending TCN queries for IGMP Snooping." + + OBJECT cisIgmpSnoopingEnabled + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT cisV3ProcessEnabledAdminStatus + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT cisFastLeaveEnabled + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT cisAdminMode + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT cisReportSuppressionEnabled + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT cisTopoChangeFloodQueryCount + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT cisIfTopoChangeFloodEnabled + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT cisTopoChangeQuerySolicitEnabled + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT cisSourceOnlyLearningEnabled + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT cisSourceOnlyEntryAgingTime + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT cisRobustnessVariable + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT cisLastMemberQueryInterval + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT cisLastMemberQueryCount + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT cisTimeToLiveCheckEnabled + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT cisRouterAlertCheckEnabled + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT cisRateLimit + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT cisVlanIgmpSnoopingEnabled + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT cisVlanFastLeaveEnabled + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT cisVlanReportSuppressionEnabled + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT cisVlanLeaveQueryInterval + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT cisVlanLastMemberQueryCount + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT cisVlanRobustnessVariable + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT cisVlanTimeToLiveCheckEnabled + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT cisVlanRouterAlertCheckEnabled + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT cisIgmpQuerierEnabled + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT cisIgmpQuerierTcnQueryCount + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT cisIgmpQuerierTcnQueryInterval + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT cisIgmpQuerierTimerExpiry + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT cisIgmpQuerierMaxResponseTime + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT cisIgmpQuerierQueryInterval + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT cisIgmpQuerierAdminAddressType + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT cisIgmpQuerierAdminAddress + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT cisIgmpQuerierAdminVersion + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT cisMcastRouterConfigStorageType + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT cisMcastRouterConfigRowStatus + SYNTAX INTEGER { + active(1) + } + WRITE-SYNTAX INTEGER { + createAndGo(4), + destroy(6) + } + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required. + + Support for createAndWait and notInService is not required." + + OBJECT cisMulticastGroupConfPortList + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT cisMulticastGroupConfStorageType + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT cisMulticastGroupConfRowStatus + SYNTAX INTEGER { + active(1) + } + WRITE-SYNTAX INTEGER { + createAndGo(4), + destroy(6) + } + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT cisL2EntryLimit + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT cisEntryTrackingLimit + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT cisSourceOnlyPercentageScanLimit + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT cisSourceOnlyLearningLimit + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT cisQuerierEnabled + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT cisQuerierTcnQueryInterval + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT cisQuerierTimerExpiry + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT cisQuerierMaxResponseTime + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT cisQuerierQueryInterval + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT cisQuerierAddressType + SYNTAX INTEGER { + ipv4(1) + } + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required. + + Only ipv4(1) needs to be supported." + + OBJECT cisQuerierAddress + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT cisQuerierVersion + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT cisIfLimitMax + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT cisIfLimitExcludeAccessGrp + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT cisIfLimitStorageType + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT cisIfLimitRowStatus + SYNTAX INTEGER { + active(1) + } + WRITE-SYNTAX INTEGER { + createAndGo(4), + destroy(6) + } + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required. + + Support for createAndWait and notInService is not required." + + OBJECT cisIfAccessGroupsChannelsAllowed + DESCRIPTION + "Write access is not required." + + OBJECT cisIfAccessGroupStorageType + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT cisIfAccessGroupRowStatus + SYNTAX INTEGER { + active(1) + } + WRITE-SYNTAX INTEGER { + createAndGo(4), + destroy(6) + } + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required. + + Support for createAndWait and notInService is not required." + + OBJECT cisVlanFilterAccessGroup + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT cisVlanFilterLimitMax + MIN-ACCESS read-only + DESCRIPTION + "Only IPv4 addresses need to be supported." + + OBJECT cisVlanFilterLimitExclAccessGrp + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT cisVlanFilterMinVersionAllowed + MIN-ACCESS read-only + DESCRIPTION + "Only IPv4 addresses need to be supported." + + OBJECT cisVlanExplicitTrackingEnabled + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT cisVlanExplicitTrackingLimit + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT cisQuerierTcnQueryCount + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + ::= { cisMIBCompliances 5 } + +-- Units of Conformance + +cisSystemGroup OBJECT-GROUP + OBJECTS { cisIgmpSnoopingEnabled } + STATUS deprecated + DESCRIPTION + "A collection of object(s) providing global system information + about, and control over, IGMP Snooping protocol operation on + device." + ::= { cisMIBGroups 1 } + +cisSystemV2Group OBJECT-GROUP + OBJECTS { cisFastLeaveEnabled } + STATUS deprecated + DESCRIPTION + "A collection of additional objects providing global system + information about, and control over, IGMPv2 Snooping protocol + operation on the device." + ::= { cisMIBGroups 2 } + +cisSystemV3Group OBJECT-GROUP + OBJECTS { + cisV3ProcessEnabledAdminStatus, + cisV3ProcessEnabledOperStatus, + cisFastBlockEnabled + } + STATUS deprecated + DESCRIPTION + "A collection of additional objects providing global system + information about, and control over, IGMPv3 Snooping protocol + operation on the device." + ::= { cisMIBGroups 3 } + +cisStatsGroup OBJECT-GROUP + OBJECTS { + cisTxGeneralQueries, + cisTxGroupSpecificQueries, + cisTxReports, + cisTxLeaves, + cisRxGeneralQueries, + cisRxGroupSpecificQueries, + cisRxReports, + cisRxLeaves, + cisRxValidPackets, + cisRxInvalidPackets, + cisRxOtherPackets, + cisRxMACGeneralQueries, + cisRxTopoNotifications + } + STATUS current + DESCRIPTION + "A collection of object(s) providing statistics + information of IGMP Snooping version 1 and 2." + ::= { cisMIBGroups 4 } + +cisV3StatsGroup OBJECT-GROUP + OBJECTS { + cisV3Allows, + cisV3Blocks, + cisV3IsIncluded, + cisV3IsExcluded, + cisV3ToIncluded, + cisV3ToExcluded + } + STATUS current + DESCRIPTION + "A collection of object(s) providing additional + statistics information of IGMPv3 Snooping." + ::= { cisMIBGroups 5 } + +cisBaseConfigGroup OBJECT-GROUP + OBJECTS { cisIgmpSnoopingEnabled } + STATUS current + DESCRIPTION + "A basic collection of object(s) providing IGMP Snooping + global configuration." + ::= { cisMIBGroups 6 } + +cisGlobalIgmpV3ConfigGroup OBJECT-GROUP + OBJECTS { + cisV3ProcessEnabledAdminStatus, + cisV3ProcessEnabledOperStatus, + cisFastBlockEnabled + } + STATUS current + DESCRIPTION + "A collection of global IGMPv3 Snooping related objects." + ::= { cisMIBGroups 7 } + +cisGlobalIgmpV3InfoGroup OBJECT-GROUP + OBJECTS { cisV3SnoopingSupport } + STATUS current + DESCRIPTION + "A collection of global IGMPv3 Snooping related objects." + ::= { cisMIBGroups 8 } + +cisExtConfig1Group OBJECT-GROUP + OBJECTS { + cisFastLeaveEnabled, + cisAdminMode, + cisOperMode, + cisLeaveQueryType, + cisAddressAliasingMode, + cisFallbackTime + } + STATUS current + DESCRIPTION + "A miscellaneous collection of object(s) for the device + that supports global IGMP Snooping configuration." + ::= { cisMIBGroups 9 } + +cisExtConfig2Group OBJECT-GROUP + OBJECTS { cisReportSuppressionEnabled } + STATUS current + DESCRIPTION + "An extended collection of miscellaneous global + configuration IGMP Snooping objects." + ::= { cisMIBGroups 10 } + +cisGlobalTcnGroup OBJECT-GROUP + OBJECTS { + cisTopoChangeFloodQueryCount, + cisTopoChangeQuerySolicitEnabled + } + STATUS current + DESCRIPTION + "A collection of global Topology Change + Notification (TCN) related configuration objects." + ::= { cisMIBGroups 11 } + +cisGlobalSourceOnlyLearnGroup OBJECT-GROUP + OBJECTS { + cisSourceOnlyLearningEnabled, + cisSourceOnlyEntryAgeTime + } + STATUS deprecated + DESCRIPTION + "A collection of global Source Only entry learning + objects." + ::= { cisMIBGroups 12 } + +cisRateLimitGroup OBJECT-GROUP + OBJECTS { + cisGeneralQueryRateLimit, + cisDvmrpRateLimit, + cisMospf1RateLimit, + cisMospf2RateLimit, + cisPimV2RateLimit + } + STATUS deprecated + DESCRIPTION + "A collection of object(s) providing rate-limit information + of protocol packets handling in IGMP Snooping." + ::= { cisMIBGroups 13 } + +cisVlanConfigGroup OBJECT-GROUP + OBJECTS { + cisVlanIgmpSnoopingEnabled, + cisVlanFastLeaveEnabled, + cisVlanIgmpSnoopingOperMode, + cisVlanIgmpSnoopingLearningMode + } + STATUS current + DESCRIPTION + "A collectoin of objects for VLAN configuration of + IGMP Snooping." + ::= { cisMIBGroups 14 } + +cisIgmpQuerierConfigGroup OBJECT-GROUP + OBJECTS { + cisIgmpQuerierEnabled, + cisIgmpQuerierState + } + STATUS current + DESCRIPTION + "A collection of object(s) for IGMP Querier configuration + of IGMP Snooping." + ::= { cisMIBGroups 15 } + +cisIgmpQuerierInfoGroup OBJECT-GROUP + OBJECTS { + cisIgmpQuerierVersion, + cisIgmpQuerierAddressType, + cisIgmpQuerierAddress, + cisIgmpQuerierInterface + } + STATUS current + DESCRIPTION + "A collection of object(s) for IGMP Querier information." + ::= { cisMIBGroups 16 } + +cisMcastRouterConfigGroup OBJECT-GROUP + OBJECTS { + cisMcastRouterType, + cisMcastRouterRowStatus + } + STATUS deprecated + DESCRIPTION + "A collection of object(s) providing multicast + router port information." + ::= { cisMIBGroups 17 } + +cisMcastGroupInfoGroup OBJECT-GROUP + OBJECTS { + cisMcastGroupFilterMode, + cisMcastGroupIgmpVersion, + cisMcastGroupIncludeHostCount, + cisMcastGroupExcludeHostCount, + cisMcastGroupPortList + } + STATUS deprecated + DESCRIPTION + "A collection of object(s) providing multicast + group information." + ::= { cisMIBGroups 18 } + +cisIfConfigGroup OBJECT-GROUP + OBJECTS { cisIfTopoChangeFloodEnabled } + STATUS current + DESCRIPTION + "A collection of object(s) providing IGMP Snoop + configuration on an interface." + ::= { cisMIBGroups 19 } + +cisL2EntryLimitGroup OBJECT-GROUP + OBJECTS { cisL2EntryLimit } + STATUS current + DESCRIPTION + "A collection of object(s) providing Layer 2 multicast + entries limit configuration and information in + IGMP Snooping." + ::= { cisMIBGroups 20 } + +cisTrackingLimitGroup OBJECT-GROUP + OBJECTS { cisEntryTrackingLimit } + STATUS current + DESCRIPTION + "A collection of object(s) providing configuration and + information of tracking database limitation in IGMP + Snooping." + ::= { cisMIBGroups 21 } + +cisSourceOnlyLimitGroup OBJECT-GROUP + OBJECTS { + cisSourceOnlyPercentageScanLimit, + cisSourceOnlyLearningLimit + } + STATUS current + DESCRIPTION + "A collection of object(s) providing Source Only learning + limit configuration and information in IGMP Snooping." + ::= { cisMIBGroups 22 } + +cisRateLimitGroup2 OBJECT-GROUP + OBJECTS { cisRateLimit } + STATUS current + DESCRIPTION + "A collection of object(s) providing additional rate-limit + information of protocol packets handling in IGMP Snooping." + ::= { cisMIBGroups 23 } + +cisVlanConfigGroup2 OBJECT-GROUP + OBJECTS { + cisVlanReportSuppressionEnabled, + cisVlanLeaveQueryInterval + } + STATUS current + DESCRIPTION + "A collection of object(s) providing per VLAN configuration + of Report Suppression and Leave Query Interval for IGMP + Snooping." + ::= { cisMIBGroups 24 } + +cisSourceOnlyAgeTimerInSecGroup OBJECT-GROUP + OBJECTS { + cisSourceOnlyLearningEnabled, + cisSourceOnlyEntryAgingTime + } + STATUS current + DESCRIPTION + "A collection of object(s) providing configuration and + information of Source Only learning control and + age timer in seconds." + ::= { cisMIBGroups 25 } + +cisMulticastGroupInfoGroup OBJECT-GROUP + OBJECTS { + cisMulticastGroupGroupType, + cisMulticastGroupIgmpVersion, + cisMulticastGroupSourceUpTime, + cisMulticastGroupSourceExpires, + cisMulticastGroupInclHostCount, + cisMulticastGroupExclHostCount + } + STATUS current + DESCRIPTION + "A collection of object(s) providing information of multicast + group." + ::= { cisMIBGroups 26 } + +cisMulticastGroupPortInfoGroup OBJECT-GROUP + OBJECTS { cisMulticastGroupPortList } + STATUS current + DESCRIPTION + "A collection of object(s) providing information of + ports joining multicast groups." + ::= { cisMIBGroups 27 } + +cisMulticastGroupConfigGroup OBJECT-GROUP + OBJECTS { + cisMulticastGroupConfPortList, + cisMulticastGroupConfStorageType, + cisMulticastGroupConfRowStatus + } + STATUS current + DESCRIPTION + "A collection of object(s) providing configuration of multicast + groups in the system." + ::= { cisMIBGroups 28 } + +cisMulticastRouterConfigGroup OBJECT-GROUP + OBJECTS { + cisMcastRouterConfigRouterType, + cisMcastRouterConfigStorageType, + cisMcastRouterConfigRowStatus + } + STATUS current + DESCRIPTION + "A collection of object(s) providing configuration and + information of multicast router ports in the system." + ::= { cisMIBGroups 29 } + +cisLeaveQueryConfigGroup OBJECT-GROUP + OBJECTS { + cisLastMemberQueryCount, + cisLastMemberQueryInterval, + cisVlanLastMemberQueryCount + } + STATUS current + DESCRIPTION + "A collection of object(s) providing configuration and + information of Leave Query for IGMP Snooping." + ::= { cisMIBGroups 30 } + +cisQuerierGlobalConfigGroup OBJECT-GROUP + OBJECTS { + cisQuerierEnabled, + cisQuerierTcnQueryInterval, + cisQuerierTimerExpiry, + cisQuerierMaxResponseTime, + cisQuerierQueryInterval, + cisQuerierAddressType, + cisQuerierAddress, + cisQuerierVersion + } + STATUS current + DESCRIPTION + "A collection of object(s) providing global configuration of + Querier function in the system." + ::= { cisMIBGroups 31 } + +cisIgmpQuerierConfigExtGroup OBJECT-GROUP + OBJECTS { + cisIgmpQuerierTcnQueryCount, + cisIgmpQuerierTcnQueryInterval, + cisIgmpQuerierTimerExpiry, + cisIgmpQuerierMaxResponseTime, + cisIgmpQuerierQueryInterval, + cisIgmpQuerierAdminAddressType, + cisIgmpQuerierAdminAddress, + cisIgmpQuerierAdminVersion + } + STATUS current + DESCRIPTION + "A collection of object(s) providing configuration of Querier + parameters for VLANs in the system." + ::= { cisMIBGroups 32 } + +cisRobustnessConfigGroup OBJECT-GROUP + OBJECTS { + cisRobustnessVariable, + cisVlanRobustnessVariable + } + STATUS current + DESCRIPTION + "A collection of object(s) providing configuration of Robustness + parameter for IGMP Snooping." + ::= { cisMIBGroups 33 } + +cisTimeToLiveConfigGroup OBJECT-GROUP + OBJECTS { + cisTimeToLiveCheckEnabled, + cisVlanTimeToLiveCheckEnabled + } + STATUS current + DESCRIPTION + "A collection of object(s) providing configuration of + Time-To-Leave for IGMP Snooping." + ::= { cisMIBGroups 34 } + +cisRouterAlertConfigGroup OBJECT-GROUP + OBJECTS { + cisRouterAlertCheckEnabled, + cisVlanRouterAlertCheckEnabled + } + STATUS current + DESCRIPTION + "A collection of object(s) providing configuration of + Router-Alert for IGMP Snooping." + ::= { cisMIBGroups 35 } + +cisVlanExplicitTrackingCfgGroup OBJECT-GROUP + OBJECTS { + cisVlanExplicitTrackingEnabled, + cisVlanExplicitTrackingLimit + } + STATUS current + DESCRIPTION + "A collection of object(s) providing configuration of Explicit + Tracking feature on VLANs for IGMP Snooping." + ::= { cisMIBGroups 36 } + +cisIfLimitGroup OBJECT-GROUP + OBJECTS { + cisIfLimitMax, + cisIfLimitExcludeAccessGrp, + cisIfLimitStorageType, + cisIfLimitRowStatus + } + STATUS current + DESCRIPTION + "A collection of object(s) providing IGMP Snooping Limit filter + configuration and information." + ::= { cisMIBGroups 37 } + +cisIfLimitTotalGroup OBJECT-GROUP + OBJECTS { + cisIfLimitTotalLimitMax, + cisIfLimitTotalExcludeAccessGrp, + cisIfLimitTotalStorageType, + cisIfLimitTotalRowStatus + } + STATUS current + DESCRIPTION + "A collection of object(s) providing IGMP Snooping Total + Limit filter configuration and information." + ::= { cisMIBGroups 38 } + +cisIfAccessGroupGroup OBJECT-GROUP + OBJECTS { + cisIfAccessGroupsChannelsAllowed, + cisIfAccessGroupStorageType, + cisIfAccessGroupRowStatus + } + STATUS current + DESCRIPTION + "A collection of object(s) providing IGMP Snooping access-group + filter configuration and information." + ::= { cisMIBGroups 39 } + +cisVlanFilterConfigGroup OBJECT-GROUP + OBJECTS { + cisVlanFilterAccessGroup, + cisVlanFilterLimitMax, + cisVlanFilterLimitExclAccessGrp, + cisVlanFilterMinVersionAllowed + } + STATUS current + DESCRIPTION + "A collection of object(s) providing VLAN-based filter + configuration for IGMP Snooping." + ::= { cisMIBGroups 40 } + +cisFilterStatisticsGroup OBJECT-GROUP + OBJECTS { + cisFilterAccessGroupDenied, + cisFilterLimitDenied, + cisFilterTotalLimitDenied, + cisFilterMinVersionDenied + } + STATUS current + DESCRIPTION + "A collection of object(s) providing statistics + information about filters applied to IGMP packets." + ::= { cisMIBGroups 41 } + +cisQuerierGlobalTcnQueryCountGroup OBJECT-GROUP + OBJECTS { cisQuerierTcnQueryCount } + STATUS current + DESCRIPTION + "A collection of object(s) providing global querier + TCN query count configuration and information for + IGMP Snooping." + ::= { cisMIBGroups 42 } + +cisQuerierTcnQueryPendingGroup OBJECT-GROUP + OBJECTS { cisIgmpQuerierTcnQueryPending } + STATUS current + DESCRIPTION + "A collection of object(s) providing information about + pending TCN queries for IGMP Snooping." + ::= { cisMIBGroups 43 } + +END + + + + + + + + + + + + + + + + + + + + + + + + + + |