Initial commitHEADmain

1 files changed, 720 insertions, 0 deletions

diff --git a/MIBS/cisco/CISCO-DIAL-CONTROL-MIB b/MIBS/cisco/CISCO-DIAL-CONTROL-MIB
new file mode 100644
index 0000000..6fd235e
--- /dev/null
+++ b/MIBS/cisco/CISCO-DIAL-CONTROL-MIB
@@ -0,0 +1,720 @@
+-- *****************************************************************
+-- The CISCO dial control mib. This is an extension to the RFC 2128.
+--
+-- Bibek Das, January, 1998
+--
+-- Copyright (c) 1998, 1999-2001, 2002, 2003, 2005 by
+-- cisco Systems, Inc.
+-- All rights reserved.
+-- *****************************************************************
+--
+-- This mib is an extension to the RFC 2128
+-- 
+-- The RFC 2128 (Dial Control Mib) defines callHistoryTable, which is
+-- the table that stores past call information. Unfortunately, the indices
+-- to this table (callActiveSetupTime, callActiveIndex) are not appropriate
+-- for the NMS to retrieve information on regular intervals.
+-- 
+-- The following changes in the RFC2128 will fix the INDEX of the
+-- callHistoryTable. This will also make the mib useful for various types 
+-- of calls, including ISDN data, voice, modem. VoIP etc. Right now, the 
+-- NMS needs to poll three different mibs (CISCO-CALL-HISTORY-MIB.my, 
+-- CISCO-POP-MGMT-MIB.my and the DIAL-CONTROL-MIB.my) for these calls.
+--
+
+
+CISCO-DIAL-CONTROL-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+        MODULE-IDENTITY,
+        OBJECT-TYPE,
+        Unsigned32 
+                FROM SNMPv2-SMI
+        DisplayString,
+        TimeStamp
+                 FROM SNMPv2-TC
+        MODULE-COMPLIANCE,
+        OBJECT-GROUP
+                FROM SNMPv2-CONF
+        ciscoExperiment                  
+                FROM CISCO-SMI
+        AbsoluteCounter32 
+                FROM DIAL-CONTROL-MIB
+        InterfaceIndexOrZero
+                FROM IF-MIB
+        SnmpAdminString                      
+                FROM SNMP-FRAMEWORK-MIB;
+
+ciscoDialControlMib MODULE-IDENTITY
+        LAST-UPDATED    "200505260000Z"
+        ORGANIZATION    "Cisco systems, Inc."
+        CONTACT-INFO
+            "        Bibek Das
+             Postal: cisco Systems
+                     170 West Tasman Drive
+                     San Jose, CA 95134
+                     U.S.A.
+             Phone:  +1 408 526 5225
+             E-mail: cs-isdn@cisco.com"
+        DESCRIPTION  
+            "The MIB module to describe call history information for
+             demand access and possibly other kinds of interfaces."
+        REVISION      "200505260000Z"
+        DESCRIPTION
+            "Modified DESCRIPTION of cPeerSearchType object.
+            "
+        REVISION      "200307100001Z"
+        DESCRIPTION
+            "1) Changed the SYNTAX of cCallHistoryLogicalIfIndex
+                to be InterfaceIndexOrZero instead of 
+                InterfaceIndex.
+             2) Modified the DESCRIPTION of 
+                cCallHistoryLogicalIfIndex."
+        REVISION      "200208210001Z"
+        DESCRIPTION
+            "1) Deprecated ciscoDialControlMibComplianceRev3 
+             2) Added a new table cCallHistoryIecTable
+             3) Added a new module-compliance
+                ciscoDialControlMibComplianceRev4 
+             4) Added gatekeeper and externalGKTMPServer enum labels
+                to cCallHistoryReleaseSrc
+             5) Added cCallHistoryIecGroup OBJECT-GROUP."
+        REVISION      "200205240001Z"
+        DESCRIPTION
+            "1) Deprecated ciscoDialControlMibComplianceRev2 
+             2) Added a new object subtree (OID)
+                cPeerGlobalConfiguration
+             3) Added a new object cPeerSearchType 
+             4) Added a new object-group cPeerGlobalConfigurationGroup
+             5) Added a new module-compliance
+                ciscoDialControlMibComplianceRev3." 
+        REVISION      "200202201546Z"
+        DESCRIPTION 
+            "1) Deprecated cCallHistoryReleaseSource 
+             2) Deprecated cCallHistoryGroupRev1 
+             3) Deprecated ciscoDialControlMibComplianceRev1 
+             3) Added a new object cCallHistoryReleaseSrc
+             4) Added a new object cCallHistoryGroupRev2
+             6) Added a new object ciscoDialControlMibComplianceRev2."
+        REVISION      "200112131546Z"
+        DESCRIPTION
+            "Added a new object cCallHistoryReleaseSource in 
+             CallHistory table."
+        REVISION      "9801161546Z"
+        DESCRIPTION
+            "The initial version of the mib."
+        ::= { ciscoExperiment 25 }
+
+
+-- Cisco Dial Control Mib objects definitions
+
+ciscoDialControlMibObjects OBJECT IDENTIFIER ::= { ciscoDialControlMib 1 }
+
+--
+-- the call history group
+--
+
+cCallHistory OBJECT IDENTIFIER ::= { ciscoDialControlMibObjects 4 }
+
+-- cCallHistoryTable
+-- Table to store the past call information. The Destination number
+-- and the call connect and disconnect time, the disconnection cause
+-- are stored. These calls could be circuit switched or they could
+-- be virtual circuits. History of each and every call is stored,
+-- of successful calls as well as of unsuccessful and rejected calls.
+-- An entry will be created when a call is cleared.
+-- The upper limit to the number of entries in this table is given
+-- by callHistoryTableMaxLength, defined in RFC 2128.
+-- The minimum time that an entry can be retained in this table is
+-- given by callHistoryRetainTimer, defined in RFC 2128.
+
+cCallHistoryTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF CCallHistoryEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "A table containing information about specific
+             calls to a specific destination."
+        ::= { cCallHistory 3 }
+
+cCallHistoryEntry OBJECT-TYPE
+        SYNTAX      CCallHistoryEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "The information regarding a single Connection."
+        INDEX       { cCallHistoryIndex }
+        ::= { cCallHistoryTable 1 }
+
+
+CCallHistoryEntry ::=
+        SEQUENCE {
+            cCallHistoryIndex                     Unsigned32,
+            cCallHistorySetupTime                 TimeStamp,
+            cCallHistoryPeerAddress               DisplayString,
+            cCallHistoryPeerSubAddress            DisplayString,
+            cCallHistoryPeerId                    INTEGER,
+            cCallHistoryPeerIfIndex               INTEGER,
+            cCallHistoryLogicalIfIndex            InterfaceIndexOrZero,
+            cCallHistoryDisconnectCause           OCTET STRING,
+            cCallHistoryDisconnectText            DisplayString,
+            cCallHistoryConnectTime               TimeStamp,
+            cCallHistoryDisconnectTime            TimeStamp,
+            cCallHistoryCallOrigin                INTEGER,
+            cCallHistoryChargedUnits              AbsoluteCounter32,
+            cCallHistoryInfoType                  INTEGER,
+            cCallHistoryTransmitPackets           AbsoluteCounter32,
+            cCallHistoryTransmitBytes             AbsoluteCounter32,
+            cCallHistoryReceivePackets            AbsoluteCounter32,
+            cCallHistoryReceiveBytes              AbsoluteCounter32,
+            cCallHistoryReleaseSource             INTEGER,
+            cCallHistoryReleaseSrc                INTEGER
+        }
+
+cCallHistoryIndex OBJECT-TYPE
+        SYNTAX      Unsigned32 (1..4294967295)
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "A monotonically increasing integer for the sole purpose of
+             indexing call disconnection events.  When it reaches the 
+             maximum value, an extremely unlikely event, the agent wraps 
+             the value back to 1 and may flush existing entries."
+        ::= { cCallHistoryEntry 1 }
+ 
+cCallHistorySetupTime OBJECT-TYPE
+        SYNTAX      TimeStamp
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The value of sysUpTime when the call setup was started.
+             This will be useful for an NMS to sort the call history
+             entry with call setup time. Also, this object
+             can be useful in finding large delays between the time the
+             call was started and the time the call was connected.
+             For ISDN media, this will be the time when the setup
+             message was received from or sent to the network.
+             The value of this object is the same as callActiveSetupTime
+             in the callActiveTable"
+        ::= { cCallHistoryEntry 2 }
+
+cCallHistoryPeerAddress OBJECT-TYPE
+        SYNTAX      DisplayString
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number this call was connected to. If the number is
+             not available, then it will have a length of zero."
+        ::= { cCallHistoryEntry 3 }
+
+cCallHistoryPeerSubAddress OBJECT-TYPE
+        SYNTAX      DisplayString
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The subaddress this call was connected to. If the subaddress
+             is undefined or not available, this will be a zero length
+             string."
+        ::= { cCallHistoryEntry 4 }
+cCallHistoryPeerId OBJECT-TYPE
+        SYNTAX      INTEGER (0..2147483647)
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "This is the Id value of the peer table entry
+             to which this call was made. If a peer table entry
+             for this call does not exist, the value of this object
+             will be zero."
+        ::= { cCallHistoryEntry 5 }
+
+cCallHistoryPeerIfIndex OBJECT-TYPE
+        SYNTAX      INTEGER (0..2147483647)
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "This is the ifIndex value of the peer table entry
+             to which this call was made. If a peer table entry
+             for this call does not exist, the value of this object
+             will be zero."
+        ::= { cCallHistoryEntry 6 }
+
+cCallHistoryLogicalIfIndex OBJECT-TYPE
+        SYNTAX      InterfaceIndexOrZero
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "This is the ifIndex value of the logical interface through
+             which this call was made. For ISDN media, this would be
+             the ifIndex of the B channel which was used for this call.
+             If the ifIndex value is unknown, the value of this object 
+             will be zero. For an IP call, the value will be zero." 
+        ::= { cCallHistoryEntry 7 }
+
+cCallHistoryDisconnectCause OBJECT-TYPE
+        SYNTAX      OCTET STRING (SIZE (0..4))
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The encoded network cause value associated with this call.
+
+             The value of this object will depend on the interface type
+             as well as on the protocol and protocol version being
+             used on this interface. Some references for possible cause
+             values are given below."
+        REFERENCE
+            "- Bellcore SR-NWT-001953, Generic Guidelines for
+               ISDN Terminal Equipment On Basic Access Interfaces,
+               chapter 5.2.5.8.
+             - Bellcore SR-NWT-002343, ISDN Primary Rate Interface
+               Generic Guidelines for Customer Premises Equipment,
+               chapter 8.2.5.8.
+             - ITU-T Q.931, Appendix I.
+             - ITU-T X.25, CAUSE and DIAGNOSTIC field values.
+             - German Telekom FTZ 1TR6, chapter 3.2.3.4.4.4."
+        ::= { cCallHistoryEntry 8 }
+
+cCallHistoryDisconnectText OBJECT-TYPE
+        SYNTAX      DisplayString
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "ASCII text describing the reason for call termination.
+
+             This object exists because it would be impossible for
+             a management station to store all possible cause values
+             for all types of interfaces. It should be used only if
+             a management station is unable to decode the value of
+             dialCtlPeerStatsLastDisconnectCause."
+        ::= { cCallHistoryEntry 9 }
+
+cCallHistoryConnectTime OBJECT-TYPE
+        SYNTAX      TimeStamp
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The value of sysUpTime when the call was connected."
+        ::= { cCallHistoryEntry 10 }
+
+cCallHistoryDisconnectTime OBJECT-TYPE
+        SYNTAX      TimeStamp
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The value of sysUpTime when the call was disconnected."
+        ::= { cCallHistoryEntry 11 }
+
+cCallHistoryCallOrigin OBJECT-TYPE
+        SYNTAX      INTEGER {
+            originate(1),
+            answer(2),
+            callback(3)
+        }
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The call origin."
+        ::= { cCallHistoryEntry 12 }
+
+cCallHistoryChargedUnits OBJECT-TYPE
+        SYNTAX      AbsoluteCounter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of charged units for this connection.
+             For incoming calls or if charging information is
+             not supplied by the switch, the value of this object
+             will be zero."
+        ::= { cCallHistoryEntry 13 }
+
+cCallHistoryInfoType OBJECT-TYPE
+        SYNTAX      INTEGER {
+            other(1),                   -- e.g. for non-isdn media
+            speech(2),
+            unrestrictedDigital(3),     -- 64k/s data
+            unrestrictedDigital56(4),   -- with 56k rate adaption
+            restrictedDigital(5),
+            audio31(6),                 -- 3.1 kHz audio
+            audio7(7),                  -- 7 kHz audio
+            video(8),
+            packetSwitched(9),
+            fax(10)
+        }
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The information type for this call."
+        ::= { cCallHistoryEntry 14 }
+
+cCallHistoryTransmitPackets OBJECT-TYPE
+        SYNTAX      AbsoluteCounter32
+        MAX-ACCESS  read-only
+        STATUS     current
+        DESCRIPTION
+            "The number of packets which were transmitted while this
+             call was active."
+        ::= { cCallHistoryEntry 15 }
+
+cCallHistoryTransmitBytes OBJECT-TYPE
+        SYNTAX      AbsoluteCounter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of bytes which were transmitted while this
+             call was active."
+        ::= { cCallHistoryEntry 16 }
+
+cCallHistoryReceivePackets OBJECT-TYPE
+        SYNTAX      AbsoluteCounter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of packets which were received while this
+             call was active."
+        ::= { cCallHistoryEntry 17 }
+
+cCallHistoryReceiveBytes OBJECT-TYPE
+        SYNTAX      AbsoluteCounter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of bytes which were received while this
+             call was active."
+        ::= { cCallHistoryEntry 18 }
+
+cCallHistoryReleaseSource OBJECT-TYPE
+        SYNTAX      INTEGER {
+            callingPartyInPstn(1),
+            callingPartyInVoip(2),
+            calledPartyInPstn(3),
+            calledPartyInVoip(4),
+            internalRelease(5),
+            internalCallControlApp(6), -- for e.g. TCL or VXML script
+            consoleCommand(7), -- for e.g. CLI or MML
+            externalRadiusServer(8),
+            externalNmsApp(9),
+            externalCallControlAgent(10)  -- for e.g. GATEKEEPER
+        }
+        MAX-ACCESS  read-only
+        STATUS      deprecated  -- superseded by cCallHistoryReleaseSrc
+        DESCRIPTION "Originator of the call release."
+        ::= { cCallHistoryEntry 19 }
+
+cCallHistoryReleaseSrc OBJECT-TYPE
+        SYNTAX      INTEGER {
+            callingPartyInPstn(1),
+            callingPartyInVoip(2),
+            calledPartyInPstn(3),
+            calledPartyInVoip(4),
+            internalReleaseInPotsLeg(5),
+            internalReleaseInVoipLeg(6),
+            internalCallControlApp(7), 
+            internalReleaseInVoipAAA(8),
+            consoleCommand(9), 
+            externalRadiusServer(10),
+            externalNmsApp(11),
+            externalCallControlAgent(12),
+            gatekeeper(13), 
+            externalGKTMPServer(14)
+        }
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION 
+            "Originator of the call release. Indicates the source of 
+             the call release as follows : 
+             1) callingPartyInPstn : Calling party in PSTN.
+             2) callingPartyInVoip : Calling party in VoIP.
+             3) calledPartyInPstn : Called party in PSTN.
+             4) calledPartyInVoip : Called party in VoIP.
+             5) internalReleaseInPotsLeg : Due to an internal error 
+                in Telephony call leg.
+             6) internalReleaseInVoipLeg : Due to an internal error
+                in VoIP call leg.
+             7) internalCallControlApp : Due to an internal error
+                in Session Application or Tcl or VXML script originated
+                release. 
+             8) internalReleaseInVoipAAA : Due to an internal error
+                in VoIP AAA module.
+             9) consoleCommand : Due to CLI or MML.
+             10) externalRadiusServer : Call failed during authorization
+                 , authentication or due to receipt of POD from the 
+                 RADIUS server.
+             11) externalNmsApp : Due to SNMP request to clear 
+                 the call.
+             12) externalCallControlAgent : External Call Control Agent
+                 initiated clear.
+             13) gatekeeper : Gatekeeper initiated clear due to receipt
+                 of Admission Reject, Disengage Request message.
+             14) externalGKTMPServer : External GKTMP server initiated
+                 clear due to receipt of Admission Reject message from
+                 the gatekeeper, triggered by RESPONSE.ARJ message from
+                 the GKTMP server."
+        ::= { cCallHistoryEntry 20 }
+
+-- cCallHistoryIecTable
+-- Table to store one or more Internal Error Codes.
+-- These IECs are generated if a call fails.
+
+cCallHistoryIecTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF CCallHistoryIecEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "This table contains information about Internal Error
+             Code(s) (IEC) which caused the call to fail."
+        ::= { cCallHistory 4 }
+
+cCallHistoryIecEntry OBJECT-TYPE
+        SYNTAX      CCallHistoryIecEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "The IEC information regarding a single call."
+        INDEX       { cCallHistoryIndex, cCallHistoryIecIndex }
+        ::= { cCallHistoryIecTable 1 }
+
+CCallHistoryIecEntry ::=
+        SEQUENCE {
+            cCallHistoryIecIndex         Unsigned32,
+            cCallHistoryIec              SnmpAdminString
+        }
+
+cCallHistoryIecIndex OBJECT-TYPE
+        SYNTAX      Unsigned32 (1..1024)
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "This object is used to index one or more IECs in the
+             context of a single call.  In most cases there will
+             only be one IEC when a call fails.  However, it is
+             possible for the software processing the call to 
+             generate multiple IECs before the call ultimately fails.
+             In that scenario, there will be multiple entries in
+             this table related to a single call (cCallHistoryIndex)
+             and this object will serve to uniquely identify each IEC."
+        ::= { cCallHistoryIecEntry 1 }
+
+cCallHistoryIec OBJECT-TYPE
+        SYNTAX      SnmpAdminString
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "This object reflects the Internal Error Code.
+             The format is a string of dotted decimal numbers
+             composed of the following components:
+
+             Version.Entity.Category.Subsystem.Errorcode.Diagnostic
+
+             Each component is defined as follows:
+             Version     : The version of IEC software.
+             Entity      : The network entity that originated
+                           the error.
+             Category    : The category of the error (eg, software
+                           error, hardware resource unavailable, ...)
+             Subsystem   : The subsystem in which the error occurred.
+             Errorcode   : A subsytem-specific error code.
+             Diagnostic  : An implementation-specific diagnostic code."
+        ::= { cCallHistoryIecEntry 2 }
+
+--
+-- Peer Global Configuration Group
+--
+
+cPeerGlobalConfiguration
+             OBJECT IDENTIFIER ::= { ciscoDialControlMibObjects 5 }
+
+cPeerSearchType OBJECT-TYPE
+        SYNTAX   INTEGER {
+            none      (1),
+            datavoice (2),
+            voicedata (3)
+        }
+        MAX-ACCESS read-write
+        STATUS     current
+        DESCRIPTION
+            "Specifies the peer search preference based on the
+             type of peers in an universal/integrated port
+             platform.
+
+            none      - both voice and data peers are searched
+                        in same preference.
+            datavoice - search data peers first. If no data peers
+                        are found, the voice peers are searched.
+            voicedata - search voice peers first. If no voice peers
+                        are found, the data peers are searched."
+        DEFVAL     { datavoice }
+        ::= { cPeerGlobalConfiguration 1 }
+
+-- conformance information
+
+ciscoDialControlMibConformance OBJECT IDENTIFIER ::=
+                                { ciscoDialControlMib 3 }
+
+ciscoDialControlMibCompliances OBJECT IDENTIFIER ::=
+                                { ciscoDialControlMibConformance 1 }
+
+ciscoDialControlMibGroups      OBJECT IDENTIFIER ::=
+                                { ciscoDialControlMibConformance 2 }
+
+-- compliance statements
+
+ciscoDialControlMibCompliance MODULE-COMPLIANCE
+        STATUS    deprecated  -- superceded by 
+                              -- ciscoDialControlMibComplianceRev1
+        DESCRIPTION
+            "The compliance statement for entities which
+             implement the DIAL CONTROL MIB"
+        MODULE      -- this module
+        MANDATORY-GROUPS
+            { cCallHistoryGroup }
+        ::= { ciscoDialControlMibCompliances 1 }
+
+ciscoDialControlMibComplianceRev1 MODULE-COMPLIANCE
+        STATUS    deprecated  -- superceded by 
+                              -- ciscoDialControlMibComplianceRev2
+        DESCRIPTION
+            "The compliance statement for entities which
+             implement the DIAL CONTROL MIB"
+        MODULE      -- this module
+        MANDATORY-GROUPS
+            { cCallHistoryGroupRev1 }
+        ::= { ciscoDialControlMibCompliances 2 }
+
+ciscoDialControlMibComplianceRev2 MODULE-COMPLIANCE
+        STATUS    deprecated  -- superceded by 
+                              -- ciscoDialControlMibComplianceRev3
+        DESCRIPTION
+            "The compliance statement for entities which
+             implement the DIAL CONTROL MIB"
+        MODULE      -- this module
+        MANDATORY-GROUPS
+            { cCallHistoryGroupRev2 }
+        ::= { ciscoDialControlMibCompliances 3 }
+
+ciscoDialControlMibComplianceRev3 MODULE-COMPLIANCE
+        STATUS    deprecated  -- superceded by 
+                              -- ciscoDialControlMibComplianceRev4
+        DESCRIPTION
+            "The compliance statement for entities which
+             implement the DIAL CONTROL MIB"
+        MODULE      -- this module
+        MANDATORY-GROUPS
+            { cCallHistoryGroupRev2, cPeerGlobalConfigurationGroup }
+        ::= { ciscoDialControlMibCompliances 4 }
+
+ciscoDialControlMibComplianceRev4 MODULE-COMPLIANCE
+        STATUS      current
+        DESCRIPTION
+            "The compliance statement for entities which
+             implement the DIAL CONTROL MIB"
+        MODULE      -- this module
+        MANDATORY-GROUPS
+            { cCallHistoryGroupRev2,
+              cPeerGlobalConfigurationGroup,
+              cCallHistoryIecGroup
+        }
+        ::= { ciscoDialControlMibCompliances 5 }
+
+-- units of conformance
+
+
+cCallHistoryGroup OBJECT-GROUP
+        OBJECTS {
+            cCallHistorySetupTime,
+            cCallHistoryPeerAddress,
+            cCallHistoryPeerSubAddress,
+            cCallHistoryPeerId,
+            cCallHistoryPeerIfIndex,
+            cCallHistoryLogicalIfIndex,
+            cCallHistoryDisconnectCause,
+            cCallHistoryDisconnectText,
+            cCallHistoryConnectTime,
+            cCallHistoryDisconnectTime,
+            cCallHistoryCallOrigin,
+            cCallHistoryChargedUnits,
+            cCallHistoryInfoType,
+            cCallHistoryTransmitPackets,
+            cCallHistoryTransmitBytes,
+            cCallHistoryReceivePackets,
+            cCallHistoryReceiveBytes
+        }
+        STATUS     deprecated  -- superceded by cCallHistoryGroupRev1
+        DESCRIPTION
+            "A collection of objects providing the Call History
+             capability."
+        ::= { ciscoDialControlMibGroups 1 }
+
+cCallHistoryGroupRev1 OBJECT-GROUP
+        OBJECTS {
+            cCallHistorySetupTime,
+            cCallHistoryPeerAddress,
+            cCallHistoryPeerSubAddress,
+            cCallHistoryPeerId,
+            cCallHistoryPeerIfIndex,
+            cCallHistoryLogicalIfIndex,
+            cCallHistoryDisconnectCause,
+            cCallHistoryDisconnectText,
+            cCallHistoryConnectTime,
+            cCallHistoryDisconnectTime,
+            cCallHistoryCallOrigin,
+            cCallHistoryChargedUnits,
+            cCallHistoryInfoType,
+            cCallHistoryTransmitPackets,
+            cCallHistoryTransmitBytes,
+            cCallHistoryReceivePackets,
+            cCallHistoryReceiveBytes,
+            cCallHistoryReleaseSource 
+        }
+        STATUS      deprecated  -- superceded by cCallHistoryGroupRev2
+        DESCRIPTION
+            "A collection of objects providing the Call History
+             capability."
+        ::= { ciscoDialControlMibGroups 2 }
+
+cCallHistoryGroupRev2 OBJECT-GROUP
+        OBJECTS {
+            cCallHistorySetupTime,
+            cCallHistoryPeerAddress,
+            cCallHistoryPeerSubAddress,
+            cCallHistoryPeerId,
+            cCallHistoryPeerIfIndex,
+            cCallHistoryLogicalIfIndex,
+            cCallHistoryDisconnectCause,
+            cCallHistoryDisconnectText,
+            cCallHistoryConnectTime,
+            cCallHistoryDisconnectTime,
+            cCallHistoryCallOrigin,
+            cCallHistoryChargedUnits,
+            cCallHistoryInfoType,
+            cCallHistoryTransmitPackets,
+            cCallHistoryTransmitBytes,
+            cCallHistoryReceivePackets,
+            cCallHistoryReceiveBytes,
+            cCallHistoryReleaseSrc 
+        }
+        STATUS      current
+        DESCRIPTION
+            "A collection of objects providing the Call History
+             capability."
+        ::= { ciscoDialControlMibGroups 3 }
+
+cPeerGlobalConfigurationGroup OBJECT-GROUP
+        OBJECTS {
+            cPeerSearchType
+        }
+        STATUS      current
+        DESCRIPTION
+            "A collection of objects providing the Peer global
+             configuration."
+        ::= { ciscoDialControlMibGroups 4 }
+
+cCallHistoryIecGroup OBJECT-GROUP
+        OBJECTS {
+            cCallHistoryIec
+        }
+        STATUS      current
+        DESCRIPTION
+            "A collection of objects providing information about
+             Internal Error Code."
+        ::= { ciscoDialControlMibGroups 5 }
+
+END