Initial commitHEADmain

1 files changed, 853 insertions, 0 deletions

diff --git a/MIBS/cisco/CISCO-CONTEXT-MAPPING-MIB b/MIBS/cisco/CISCO-CONTEXT-MAPPING-MIB
new file mode 100644
index 0000000..9445156
--- /dev/null
+++ b/MIBS/cisco/CISCO-CONTEXT-MAPPING-MIB
@@ -0,0 +1,853 @@
+-- *****************************************************************
+-- CISCO-CONTEXT-MAPPING-MIB.my:  Cisco Context Mapping MIB
+--   
+-- January 2005, Chinna Pellacuru.
+--   
+-- May 2008, Sheethal Gunjal.
+--   
+-- Copyright (c) 2004-2005, 2008 by cisco Systems Inc.
+-- All rights reserved.
+--   
+-- ****************************************************************
+
+CISCO-CONTEXT-MAPPING-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY,
+    OBJECT-TYPE
+        FROM SNMPv2-SMI
+    MODULE-COMPLIANCE,
+    OBJECT-GROUP
+        FROM SNMPv2-CONF
+    SnmpAdminString
+        FROM SNMP-FRAMEWORK-MIB
+    RowStatus,
+    StorageType
+        FROM SNMPv2-TC
+    CiscoBridgeDomain
+        FROM CISCO-TC
+    ciscoMgmt
+        FROM CISCO-SMI;
+
+
+ciscoContextMappingMIB MODULE-IDENTITY
+    LAST-UPDATED    "200811220000Z"
+    ORGANIZATION    "Cisco Systems, Inc."
+    CONTACT-INFO
+            "Cisco Systems
+            Customer Service
+
+            Postal: 170 W Tasman Drive
+            San Jose, CA  95134
+            USA
+
+            Tel: +1 800 553-NETS
+
+            E-mail: cs-snmp@cisco.com"
+    DESCRIPTION
+        "A single SNMP agent sometimes needs to support multiple
+        instances of the same MIB module, and does so through the
+        use of multiple SNMP contexts.  This typically occurs because
+        the technology has evolved to have extra dimension(s), i.e.,
+        one or more extra data and/or identifier values which are
+        different in the different contexts, but were not defined in
+        INDEX clause(s) of the original MIB module.  In such cases,
+        network management applications need to know the specific
+        data/identifier values in each context, and this MIB module
+        provides mapping tables which contain that information.
+
+        Within a network there can be multiple Virtual Private
+        Networks (VPNs) configured using Virtual Routing and
+        Forwarding Instances (VRFs). Within a VPN there can be
+        multiple topologies when Multi-topology Routing (MTR) is
+        used. Also, Interior Gateway Protocols (IGPs) can have
+        multiple protocol instances running on the device.
+        A network can have multiple broadcast domains configured
+        using Bridge Domain Identifiers.
+
+        With MTR routing, VRFs, and Bridge domains, a router now 
+        needs to support multiple instances of several existing 
+        MIB modules, and this can be achieved if the router's SNMP 
+        agent provides access to each instance of the same MIB module 
+        via a different SNMP context (see Section 3.1.1 of RFC 3411).
+        For MTR routing, VRFs, and Bridge domains, a different SNMP 
+        context is needed depending on one or more of the following: 
+        the VRF, the topology-identifier, the routing protocol instance,
+        and the bridge domain identifier.
+        In other words, the router's management information can be
+        accessed through multiple SNMP contexts where each such
+        context represents a specific VRF, a specific
+        topology-identifier, a specific routing protocol instance 
+        and/or a bridge domain identifier. This MIB module provides 
+        a mapping of each such SNMP context to the corresponding VRF,
+        the corresponding topology, the corresponding routing protocol 
+        instance, and the corresponding bridge domain identifier.
+        Some SNMP contexts are independent of VRFs, independent of
+        a topology, independent of a routing protocol instance, or 
+        independent of a bridge domain and in such a case, the mapping
+        is to the zero length string.
+
+        With the Cisco package licensing strategy, the features 
+        available in the image are grouped into multiple packages 
+        and each packages can be managed to operate at different 
+        feature levels based on the available license. This MIB 
+        module provides option to associate an SNMP context to a 
+        feature package group. This will allow manageability of 
+        license MIB objects specific to a feature package group.
+
+        As technology evolves more we may need additional
+        identifiers to identify the context. Then we would need
+        to add those additional identifiers into the mapping."
+    REVISION        "200811220000Z"
+    DESCRIPTION
+        "Added New Table cContextMappingLicenseGroupTable
+        to provide SNMP Context support for license package groups.
+
+        Added cContextMappingLicenseGroupDataGroup in OBJECT-GROUP
+        Added cContextMappingMIBComplianceRev2 in MODULE-COMPLIANCE
+
+        Updated the MIB description to indicate the use of
+        the above additions"
+    REVISION        "200805300000Z"
+    DESCRIPTION
+        "Add cContextMappingBridgeInstanceTable.
+
+        Added cContextMappingBridgeInstanceDataGroup.
+        Deprecated cContextMappingMIBComplianceRev1 and added
+        cContextMappingMIBComplianceRev2 compliance statement."
+    REVISION        "200802010000Z"
+    DESCRIPTION
+        "Added New Table cContextMappingBridgeDomainTable
+        to provide SNMP context support to the Bridge Domain.
+
+        Added cContextMappingBridgeDomainDataGroup in OBJECT-GROUP
+        Added cContextMappingMIBComplianceRev1 in MODULE-COMPLIANCE"
+    REVISION        "200503170000Z"
+    DESCRIPTION
+        "Initial version of the MIB module."
+    ::= { ciscoMgmt 468 }
+
+
+cContextMappingMIBObjects  OBJECT IDENTIFIER
+    ::= { ciscoContextMappingMIB 1 }
+
+cContextMappingMIBConformance  OBJECT IDENTIFIER
+    ::= { ciscoContextMappingMIB 2 }
+
+
+cContextMappingTable OBJECT-TYPE
+    SYNTAX          SEQUENCE OF CContextMappingEntry 
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "This table contains information on which
+        cContextMappingVacmContextName is mapped to
+        which VRF, topology, and routing protocol instance.
+
+        This table is indexed by SNMP VACM context.
+
+        Configuring a row in this table for an SNMP context
+        does not require that the context be already defined,
+        i.e., a row can be created in this table for a context
+        before the corresponding row is created in RFC 3415's
+        vacmContextTable.
+
+        To create a row in this table, a manager must set
+        cContextMappingRowStatus to either 'createAndGo' or
+        'createAndWait'.
+
+        To delete a row in this table, a manager must set
+        cContextMappingRowStatus to 'destroy'."
+    ::= { cContextMappingMIBObjects 1 }
+
+cContextMappingEntry OBJECT-TYPE
+    SYNTAX          CContextMappingEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "Information relating to a single mapping of
+        cContextMappingVacmContextName to the corresponding VRF,
+        the corresponding topology, and the corresponding routing
+        protocol instance."
+    INDEX           { cContextMappingVacmContextName } 
+    ::= { cContextMappingTable 1 }
+
+CContextMappingEntry ::= SEQUENCE {
+        cContextMappingVacmContextName SnmpAdminString,
+        cContextMappingVrfName         SnmpAdminString,
+        cContextMappingTopologyName    SnmpAdminString,
+        cContextMappingProtoInstName   SnmpAdminString,
+        cContextMappingStorageType     StorageType,
+        cContextMappingRowStatus       RowStatus
+}
+
+cContextMappingVacmContextName OBJECT-TYPE
+    SYNTAX          SnmpAdminString (SIZE  (0..32))
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "The vacmContextName given to the SNMP context.
+
+        This is a human readable name identifying a particular
+        SNMP VACM context at a particular SNMP entity.
+        The empty contextName (zero length) represents the
+        default context." 
+    ::= { cContextMappingEntry 1 }
+
+cContextMappingVrfName OBJECT-TYPE
+    SYNTAX          SnmpAdminString (SIZE  (0..32))
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "The value of an instance of this object identifies
+        the name given to the VRF to which the SNMP context
+        is mapped to.
+
+        This is typically a human-readable string. This is
+        the same ASCII string used in the router's console
+        interface to refer to this VRF.
+
+        When the value of this object is the zero length
+        string it indicates that the SNMP context is independent
+        of any VRF."
+    DEFVAL          { ''H } 
+    ::= { cContextMappingEntry 2 }
+
+cContextMappingTopologyName OBJECT-TYPE
+    SYNTAX          SnmpAdminString (SIZE  (0..32))
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "The value of an instance of this object identifies
+        the name given to the topology to which the SNMP
+        context is mapped to.
+
+        This is typically a human-readable string. This is
+        the same ASCII string used in the router's console
+        interface to refer to this topology.
+
+        When the value of this object is the zero length
+        string it indicates that the SNMP context is independent
+        of any topology."
+    DEFVAL          { ''H } 
+    ::= { cContextMappingEntry 3 }
+
+cContextMappingProtoInstName OBJECT-TYPE
+    SYNTAX          SnmpAdminString (SIZE  (0..32))
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "The value of an instance of this object identifies
+        the name given to the protocol instance to which the
+        SNMP context is mapped to.
+
+        This is typically a human-readable string. This is
+        the same ASCII string used in the router's console
+        interface to refer to this protocol instance.
+
+        When the value of this object is the zero length
+        string it indicates that the SNMP context is independent
+        of any protocol instance."
+    DEFVAL          { ''H } 
+    ::= { cContextMappingEntry 4 }
+
+cContextMappingStorageType OBJECT-TYPE
+    SYNTAX          StorageType
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "The storage type for this conceptual row.
+
+        Conceptual rows having the value 'permanent' need not
+        allow write-access to any columnar objects in the row."
+    DEFVAL          { nonVolatile } 
+    ::= { cContextMappingEntry 5 }
+
+cContextMappingRowStatus OBJECT-TYPE
+    SYNTAX          RowStatus
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "This object facilitates the creation, modification, or
+        deletion of a conceptual row in this table." 
+    ::= { cContextMappingEntry 6 }
+ 
+
+
+cContextMappingBridgeDomainTable OBJECT-TYPE
+    SYNTAX          SEQUENCE OF CContextMappingBridgeDomainEntry 
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "This table contains information on which
+        cContextMappingVacmContextName is mapped to
+        which bridge domain.
+
+        A Bridge Domain is one of the means by which it is possible 
+        to define an Ethernet broadcast domain on a bridging device. 
+        A network can have multiple broadcast domains configured.
+        This table helps the network management personnel to find 
+        out the  details of various broadcast domains configured 
+        in the network.
+
+        An entry need to exist in cContextMappingTable, to create 
+        an entry in this table."
+    ::= { cContextMappingMIBObjects 2 }
+
+cContextMappingBridgeDomainEntry OBJECT-TYPE
+    SYNTAX          CContextMappingBridgeDomainEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "Information relating to a single mapping of
+        cContextMappingVacmContextName to the 
+        corresponding bridge domain.
+
+        To create a row in this table, a manager must set
+        cContextMappingBridgeDomainRowStatus to either 
+        'createAndGo' or 'createAndWait'.
+
+        To delete a row in this table, a manager must set
+        cContextMappingBridgeDomainRowStatus to 'destroy'."
+    INDEX           { cContextMappingVacmContextName } 
+    ::= { cContextMappingBridgeDomainTable 1 }
+
+CContextMappingBridgeDomainEntry ::= SEQUENCE {
+        cContextMappingBridgeDomainIdentifier  CiscoBridgeDomain,
+        cContextMappingBridgeDomainStorageType StorageType,
+        cContextMappingBridgeDomainRowStatus   RowStatus
+}
+
+cContextMappingBridgeDomainIdentifier OBJECT-TYPE
+    SYNTAX          CiscoBridgeDomain
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "The value of an instance of this object identifies
+        the bridge domain to which the SNMP context is 
+        mapped to."
+    REFERENCE       "CISCO-BRIDGE-DOMAIN-MIB" 
+    ::= { cContextMappingBridgeDomainEntry 1 }
+
+cContextMappingBridgeDomainStorageType OBJECT-TYPE
+    SYNTAX          StorageType
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "The storage type for this conceptual row.
+
+        Conceptual rows having the value 'permanent' need not
+        allow write-access to any columnar objects in the row."
+    DEFVAL          { nonVolatile } 
+    ::= { cContextMappingBridgeDomainEntry 2 }
+
+cContextMappingBridgeDomainRowStatus OBJECT-TYPE
+    SYNTAX          RowStatus
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "This object facilitates the creation, modification, or
+        deletion of a conceptual row in this table." 
+    ::= { cContextMappingBridgeDomainEntry 3 }
+ 
+
+
+cContextMappingBridgeInstanceTable OBJECT-TYPE
+    SYNTAX          SEQUENCE OF CContextMappingBridgeInstanceEntry 
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "This table contains information on mapping between
+        cContextMappingVacmContextName and bridge instance.
+
+        Bridge instance is an instance of a physical or logical 
+        bridge which has unique bridge-id.
+
+        If an entry is deleted from cContextMappingTable, the
+        corresponding entry in this table will also get deleted.
+
+        If an entry needs to be created in this table, the
+        corresponding entry must exist in cContextMappingTable."
+    REFERENCE       "BRIDGE-MIB"
+    ::= { cContextMappingMIBObjects 3 }
+
+cContextMappingBridgeInstanceEntry OBJECT-TYPE
+    SYNTAX          CContextMappingBridgeInstanceEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "Information relating to a single mapping of
+        cContextMappingVacmContextName to the 
+        corresponding bridge instance.
+
+        To create a row in this table, a manager must set
+        cContextMappingBridgeInstRowStatus to either 
+        'createAndGo' or 'createAndWait'.
+
+        To delete a row in this table, a manager must set
+        cContextMappingBridgeInstRowStatus to 'destroy'."
+    INDEX           { cContextMappingVacmContextName } 
+    ::= { cContextMappingBridgeInstanceTable 1 }
+
+CContextMappingBridgeInstanceEntry ::= SEQUENCE {
+        cContextMappingBridgeInstName        SnmpAdminString,
+        cContextMappingBridgeInstStorageType StorageType,
+        cContextMappingBridgeInstRowStatus   RowStatus
+}
+
+cContextMappingBridgeInstName OBJECT-TYPE
+    SYNTAX          SnmpAdminString
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "The object identifies the name given to bridge
+        instance to which the SNMP context is mapped to.
+
+        Value of this object cannot be changed when the 
+        RowStatus object in the same row is 'active'.
+
+        This is typically a human-readable string. This is
+        the same ASCII string used in the router's console
+        interface to refer to this bridge instance.
+
+        When the value of this object is a zero length
+        string, it indicates that the SNMP context is
+        independent of any bridge instances." 
+    ::= { cContextMappingBridgeInstanceEntry 1 }
+
+cContextMappingBridgeInstStorageType OBJECT-TYPE
+    SYNTAX          StorageType
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "The storage type for this conceptual row.
+
+        Value of this object cannot be changed when the 
+        RowStatus object in the same row is 'active'.
+
+        Conceptual rows having the value 'permanent' need not
+        allow write-access to any columnar objects in the row."
+    DEFVAL          { nonVolatile } 
+    ::= { cContextMappingBridgeInstanceEntry 2 }
+
+cContextMappingBridgeInstRowStatus OBJECT-TYPE
+    SYNTAX          RowStatus
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "This object facilitates the creation, modification, or
+        deletion of a conceptual row in this table." 
+    ::= { cContextMappingBridgeInstanceEntry 3 }
+ 
+
+
+cContextMappingLicenseGroupTable OBJECT-TYPE
+    SYNTAX          SEQUENCE OF CContextMappingLicenseGroupEntry 
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "This table contains information on which
+        cContextMappingVacmContextName is mapped to
+        which License Group.
+        Group level licensing is used where each
+        Technology Package is enabled via a License."
+    ::= { cContextMappingMIBObjects 4 }
+
+cContextMappingLicenseGroupEntry OBJECT-TYPE
+    SYNTAX          CContextMappingLicenseGroupEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "Information relating to a single mapping of
+        CContextMappingVacmContextName to the
+        corresponding License Group."
+    INDEX           { cContextMappingVacmContextName } 
+    ::= { cContextMappingLicenseGroupTable 1 }
+
+CContextMappingLicenseGroupEntry ::= SEQUENCE {
+        cContextMappingLicenseGroupName        SnmpAdminString,
+        cContextMappingLicenseGroupStorageType StorageType,
+        cContextMappingLicenseGroupRowStatus   RowStatus
+}
+
+cContextMappingLicenseGroupName OBJECT-TYPE
+    SYNTAX          SnmpAdminString (SIZE  (0..32))
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "The value of an instance of this object identifies
+        the name given to the Group to which the SNMP context
+        is mapped.
+
+        Feature sets from all groups will be combined to form 
+        universal image. User can configure multiple groups as needed.
+
+        For example: In Next generation ISRs will use
+        the universal image package level licensing model
+        for its licensing need. Each group has
+        the feature set needed for that specific technology.
+        Feature sets from different groups are combined to 
+        form universal image and each feature set for a group 
+        can be enabled using a valid license key. There will 
+        be a base level ipbase package in which the router 
+        boots with out any license key.
+
+        The following are the different Technology Groups.
+        1.crypto
+        2.data
+        3.ip
+        4.legacy
+        5.novpn-security
+        6.security
+        7.uc" 
+    ::= { cContextMappingLicenseGroupEntry 1 }
+
+cContextMappingLicenseGroupStorageType OBJECT-TYPE
+    SYNTAX          StorageType
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "The storage type for this conceptual row.
+
+        Conceptual rows having the value 'permanent' need not
+        allow write-access to any columnar objects in the row."
+    DEFVAL          { nonVolatile } 
+    ::= { cContextMappingLicenseGroupEntry 2 }
+
+cContextMappingLicenseGroupRowStatus OBJECT-TYPE
+    SYNTAX          RowStatus
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "This object facilitates the creation, modification, or
+        deletion of a conceptual row in this table." 
+    ::= { cContextMappingLicenseGroupEntry 3 }
+ 
+
+-- Conformance
+
+cContextMappingMIBCompliances  OBJECT IDENTIFIER
+    ::= { cContextMappingMIBConformance 1 }
+
+cContextMappingMIBGroups  OBJECT IDENTIFIER
+    ::= { cContextMappingMIBConformance 2 }
+
+
+-- Compliance
+
+cContextMappingMIBCompliance MODULE-COMPLIANCE
+    STATUS          deprecated
+    DESCRIPTION
+        "The compliance statement for entities which implement
+        the CISCO-CONTEXT-MAPPING-MIB."
+    MODULE          -- this module
+    MANDATORY-GROUPS { cContextMappingDataGroup }
+
+    OBJECT          cContextMappingVrfName
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          cContextMappingTopologyName
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          cContextMappingProtoInstName
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          cContextMappingStorageType
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          cContextMappingRowStatus
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Create/delete/modify access to the
+        cContextMappingTable is not required."
+    ::= { cContextMappingMIBCompliances 1 }
+
+cContextMappingMIBComplianceRev1 MODULE-COMPLIANCE
+    STATUS          deprecated
+    DESCRIPTION
+        "The compliance statement for entities which implement
+        the CISCO-CONTEXT-MAPPING-MIB. This compliance statement 
+        is superceded by cContextMappingMIBComplianceRev2."
+    MODULE          -- this module
+    MANDATORY-GROUPS {
+                        cContextMappingDataGroup,
+                        cContextMappingBridgeDomainDataGroup
+                    }
+
+    OBJECT          cContextMappingVrfName
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          cContextMappingTopologyName
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          cContextMappingProtoInstName
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          cContextMappingStorageType
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          cContextMappingRowStatus
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Create/delete/modify access to the
+        cContextMappingTable is not required."
+
+    OBJECT          cContextMappingBridgeDomainIdentifier
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          cContextMappingBridgeDomainStorageType
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          cContextMappingBridgeDomainRowStatus
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Create/delete/modify access to the
+        cContextMappingTable is not required."
+    ::= { cContextMappingMIBCompliances 2 }
+
+cContextMappingMIBComplianceRev2 MODULE-COMPLIANCE
+    STATUS          deprecated
+    DESCRIPTION
+        "The compliance statement for entities which implement
+        the CISCO-CONTEXT-MAPPING-MIB."
+    MODULE          -- this module
+    MANDATORY-GROUPS {
+                        cContextMappingDataGroup,
+                        cContextMappingBridgeDomainDataGroup,
+                        cContextMappingBridgeInstanceDataGroup
+                    }
+
+    OBJECT          cContextMappingVrfName
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          cContextMappingTopologyName
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          cContextMappingProtoInstName
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          cContextMappingStorageType
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          cContextMappingRowStatus
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Create/delete/modify access to the
+        cContextMappingTable is not required."
+
+    OBJECT          cContextMappingBridgeDomainIdentifier
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          cContextMappingBridgeDomainStorageType
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          cContextMappingBridgeDomainRowStatus
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Create/delete/modify access to the
+        cContextMappingBridgeDomainTable is not required."
+
+    OBJECT          cContextMappingBridgeInstName
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          cContextMappingBridgeInstStorageType
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          cContextMappingBridgeInstRowStatus
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Create/delete/modify access to the
+        cContextMappingBridgeInstanceTable is not required."
+    ::= { cContextMappingMIBCompliances 3 }
+
+cContextMappingMIBComplianceRev3 MODULE-COMPLIANCE
+    STATUS          current
+    DESCRIPTION
+        "The compliance statement for entities which implement
+        the CISCO-CONTEXT-MAPPING-MIB."
+    MODULE          -- this module
+    MANDATORY-GROUPS {
+                        cContextMappingDataGroup,
+                        cContextMappingBridgeDomainDataGroup,
+                        cContextMappingBridgeInstanceDataGroup,
+                        cContextMappingLicenseGroupDataGroup
+                    }
+
+    OBJECT          cContextMappingVrfName
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          cContextMappingTopologyName
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          cContextMappingProtoInstName
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          cContextMappingStorageType
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          cContextMappingRowStatus
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Create/delete/modify access to the
+        cContextMappingTable is not required."
+
+    OBJECT          cContextMappingBridgeDomainIdentifier
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          cContextMappingBridgeDomainStorageType
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          cContextMappingBridgeDomainRowStatus
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Create/delete/modify access to the
+        cContextMappingBridgeDomainTable is not required."
+
+    OBJECT          cContextMappingBridgeInstName
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          cContextMappingBridgeInstStorageType
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          cContextMappingBridgeInstRowStatus
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Create/delete/modify access to the
+        cContextMappingBridgeInstanceTable is not required."
+
+    OBJECT          cContextMappingLicenseGroupName
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          cContextMappingLicenseGroupStorageType
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          cContextMappingLicenseGroupRowStatus
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Create/delete/modify access to the
+        cContextMappingTable is not required."
+    ::= { cContextMappingMIBCompliances 4 }
+
+-- Units of Conformance
+
+cContextMappingDataGroup OBJECT-GROUP
+    OBJECTS         {
+                        cContextMappingVrfName,
+                        cContextMappingTopologyName,
+                        cContextMappingProtoInstName,
+                        cContextMappingStorageType,
+                        cContextMappingRowStatus
+                    }
+    STATUS          current
+    DESCRIPTION
+        "The collection of objects providing the context
+        mapping data between the SNMP context to the
+        corresponding VRF, the corresponding topology,
+        and the corresponding routing protocol instance."
+    ::= { cContextMappingMIBGroups 1 }
+
+cContextMappingBridgeDomainDataGroup OBJECT-GROUP
+    OBJECTS         {
+                        cContextMappingBridgeDomainIdentifier,
+                        cContextMappingBridgeDomainStorageType,
+                        cContextMappingBridgeDomainRowStatus
+                    }
+    STATUS          current
+    DESCRIPTION
+        "The collection of objects providing the context
+        mapping data between the SNMP context to the
+        corresponding bridge domain."
+    ::= { cContextMappingMIBGroups 2 }
+
+cContextMappingBridgeInstanceDataGroup OBJECT-GROUP
+    OBJECTS         {
+                        cContextMappingBridgeInstName,
+                        cContextMappingBridgeInstStorageType,
+                        cContextMappingBridgeInstRowStatus
+                    }
+    STATUS          current
+    DESCRIPTION
+        "The collection of objects providing the context
+        mapping data between the SNMP context to the
+        corresponding bridge instance."
+    ::= { cContextMappingMIBGroups 3 }
+
+cContextMappingLicenseGroupDataGroup OBJECT-GROUP
+    OBJECTS         {
+                        cContextMappingLicenseGroupName,
+                        cContextMappingLicenseGroupStorageType,
+                        cContextMappingLicenseGroupStorageType,
+                        cContextMappingLicenseGroupRowStatus
+                    }
+    STATUS          current
+    DESCRIPTION
+        "The collection of objects providing the context
+        mapping data between the SNMP context to the
+        corresponding LicenseGroupName."
+    ::= { cContextMappingMIBGroups 4 }
+
+END
+
+
+
+
+
+
+
+