summaryrefslogtreecommitdiff
path: root/MIBS/ceraos/MWRM-UNIT-MIB
diff options
context:
space:
mode:
authorDavid Leutgeb <david.leutgeb@mannundmouse.com>2023-12-05 12:25:34 +0100
committerDavid Leutgeb <david.leutgeb@mannundmouse.com>2023-12-05 12:25:34 +0100
commit98a672123c7872f6b9b75a9a2b6bb3aea504de6a (patch)
tree9b13bd7f563c3198047bd359195327cf28b3caf0 /MIBS/ceraos/MWRM-UNIT-MIB
downloadmibs-98a672123c7872f6b9b75a9a2b6bb3aea504de6a.tar.gz
mibs-98a672123c7872f6b9b75a9a2b6bb3aea504de6a.zip
Initial commitHEADmain
Diffstat (limited to 'MIBS/ceraos/MWRM-UNIT-MIB')
-rw-r--r--MIBS/ceraos/MWRM-UNIT-MIB6826
1 files changed, 6826 insertions, 0 deletions
diff --git a/MIBS/ceraos/MWRM-UNIT-MIB b/MIBS/ceraos/MWRM-UNIT-MIB
new file mode 100644
index 0000000..fc58105
--- /dev/null
+++ b/MIBS/ceraos/MWRM-UNIT-MIB
@@ -0,0 +1,6826 @@
+--MWRM-UNIT-MIB VERSION 1.8.3.2
+--MWRM (MicroWave-Radio-MIB)
+MWRM-UNIT-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+-- Ipv6Address FROM IPV6-TC
+ enterprises, IpAddress FROM SNMPv2-SMI
+ DisplayString, ifIndex FROM RFC1213-MIB
+ RowStatus FROM SNMPv2-TC
+ MacAddress FROM SNMPv2-TC
+ OBJECT-TYPE FROM SNMPv2-SMI
+ TRAP-TYPE FROM RFC-1215;
+
+EnableDisable ::= INTEGER { enable(2), disable(3) }
+EnableDisableSMI2 ::= INTEGER { disable(0), enable(1) }
+OffOn ::= INTEGER { off(0), on(1) }
+MetricImperial ::= INTEGER { metric(0), imperial(1) }
+AllowedNotAllowed ::= INTEGER { not-allowed(0), allowed(1)}
+NoYes ::= INTEGER { no(0), yes(1) }
+DownUp ::= INTEGER { down(0), up(1) }
+SupportedNotsupported ::= INTEGER { supported(2), not-supported(3) }
+
+ProgressStatus ::= INTEGER{
+ ready(0),
+ inProgress(1),
+ success(2),
+ failure(3)
+ }
+
+Severity ::= INTEGER {
+ indeterminate(0),
+ critical(1),
+ major(2),
+ minor(3),
+ warning(4),
+ cleared(5)
+ }
+
+
+TrailIfType ::= INTEGER {
+ unknown(-1),
+ line(0),
+ radio(1),
+ stm-1-oc-3(2),
+ sync(4)
+ }
+
+PmTableType ::= INTEGER {
+ pm15mincurr(1),
+ pm15min(2),
+ pm24hrcurr(3),
+ pm24hr(4)
+ }
+
+RateMbps ::= INTEGER {not-applicable(-1), n10(0), n100(1), n1000(2) }
+
+HalfFull ::= INTEGER {not-applicable(-1), half(0), full(1), auto(2) }
+
+BerLevel ::= INTEGER { n1e-3(2), n1e-4(3), n1e-5(4)}
+
+SignalLevel ::= INTEGER { n1e-6(5), n1e-7(6), n1e-8(7), n1e-9(8)}
+
+Exponent ::= INTEGER {
+ n1e-2(1),
+ n1e-3(2),
+ n1e-4(3),
+ n1e-5(4),
+ n1e-6(5),
+ n1e-7(6),
+ n1e-8(7),
+ n1e-9(8),
+ n1e-10(9),
+ n1e-11(10),
+ n1e-12(11),
+ n1e-13(12),
+ n1e-14(13),
+ n1e-15(14),
+ n1e-16(15),
+ n1e-17(16),
+ n1e-18(17),
+ n1e-0(18)
+ }
+
+LoopbackType ::= INTEGER {
+ off(0),
+ towardsLine(1),
+ towardsRadio(2)
+ }
+
+QueueName ::= INTEGER {
+ first-queue(0),
+ second-queue(1),
+ third-queue(2),
+ fourth-queue(3),
+ none(4)
+ }
+
+RadioId ::= INTEGER
+RfuId ::= INTEGER
+
+SwCommand ::= INTEGER{
+ noOperation(0),
+ downloadUpgradeVersion(1),
+ upgrade(2),
+ rollback(3),
+ downgrade(4),
+ downloadDowngradeVersion(5)
+ }
+
+TrailProtectedType ::= INTEGER {
+ none(0),
+ primary(1),
+ secondary(2)
+ }
+
+ClockSrc ::= INTEGER {
+ local-clock(0),
+ system-clock-source(1)
+ }
+
+SlotId ::= INTEGER {
+ standalone(0),
+ slot1(1),
+ slot2(2),
+ slot3(3),
+ slot4(4),
+ slot5(5),
+ slot6(6),
+ slot7(7),
+ slot8(8),
+ slot9(9),
+ slot10(10),
+ slot11(11),
+ slot12(12)
+ }
+
+Integrity ::= INTEGER { integrity(0), nointegrity(1) }
+
+GreenYellow ::= INTEGER {
+ green(0),
+ yellow(1)
+ }
+
+InputSeverity ::= INTEGER {
+ indeterminate(0),
+ critical(1),
+ major(2),
+ minor(3),
+ warning(4)
+ }
+
+SwCommandTimer ::= INTEGER{
+ noOperation(0),
+ downloadUpgradeVersion(1),
+ upgrade(2),
+ rollback(3),
+ downgrade(4),
+ downloadDowngradeVersion(5),
+ upgradeTimer(6),
+ rollbackTimer(7),
+ downgradeTimer(8),
+ abortTimedInstallation(9)
+ }
+
+FileTransferStatus ::= INTEGER{
+ ready(0),
+ inTransfer(1),
+ failure(2),
+ success(3)
+ }
+
+FileRestoreStatus ::= INTEGER{
+ ready(0),
+ restoring-configuration(1),
+ failure(2),
+ success(3)
+ }
+
+
+RbacAccessLevel ::= INTEGER {
+ none(0),
+ normal(1),
+ advance(2)
+ }
+
+InventoryCardType ::= INTEGER {
+ cleared(0),
+ nexusSc(10),
+ nexusScLp(11),
+ nexusDc(12),
+ nexusQc(13),
+ tccR(19),
+ tccA(20),
+ tccB(21),
+ rmcA(22),
+ rmcB(23),
+ rmcNDc(24),
+ nativeTdm16xE1T1(25),
+ pwe3-16xE1T1(26),
+ tdm1xStm1(27),
+ tdm1xOc3(28),
+ eLicEth4x1GEA(29),
+ chassis1U2U(30),
+ capacityBooster(31),
+ pwe3-1xSTM1(32),
+ pdc48v2uSingleFeed(33),
+ pdc48v1uSingleFeed(34),
+ pdc48v1uDualFeed(35),
+ fan2U(36),
+ fan1U(37),
+ test-card(38),
+ pdc24v2uSingleFeed(39),
+ pdc24v1uSingleFeed(40),
+ pdc24v1uDualFeed(41),
+ unknownCard(42),
+ ricE(43),
+ trafficFpga(44),
+ essFpga(45),
+ tressFpga(46),
+ ip20g(47),
+ licXe4opt(48),
+ tccBmc(49),
+ rmcE(50),
+ licStm1oc3rst(51),
+ tccAmc(52),
+ ip20cEband(53),
+ tccA2(54),
+ tccA2mc(55),
+ tccB2(56)
+ }
+
+
+FtpProtocolType ::= INTEGER {
+ ftp(0),
+ sftp(1)
+ }
+
+CfgUnitInfoOper ::= INTEGER {
+ invalid-operation(0),
+ create-pakcge(1),
+ export-pakcge(2)
+ }
+
+CfgOper ::= INTEGER {
+ invalid-operation(0),
+ backup(1),
+ restore(2),
+ delete(3),
+ import(4),
+ export(5)
+ }
+
+CardOccupancy ::= INTEGER {
+ empty(1),
+ equipped(2),
+ not-operational(3)
+ }
+
+OperState ::= INTEGER {
+ down(1),
+ init(2),
+ loading(3),
+ loaded(4),
+ up(5),
+ up-with-alarms(6)
+ }
+
+LicenseGeneric ::= INTEGER {
+ not-allowed(100000),
+ allowed(100001),
+ disable(100010),
+ enable(100011),
+ only-management(100020),
+ smart-pipe(100021),
+ enhanced-pipe(100022),
+ edge-cet(100023),
+ access-cet(100024),
+ aggregation-cet(100025)
+ }
+
+RaduisAcceaaLevel ::= INTEGER {
+ none(0),
+ normal(1),
+ advanced(2),
+ root(3)
+ }
+
+VmResetType ::= INTEGER {
+ no-reset(0),
+ main-board-warm-reset(1),
+ tcc-cold-reset(2),
+ main-board-cold-reset(3),
+ card-warm-reset(4),
+ card-cold-reset(5),
+ not-applicable-reset(6)
+ }
+
+FTStatus ::= INTEGER {
+ ready(0),
+ file-in-transfer(1),
+ failure(2),
+ success(3)
+ }
+
+CsrCertificateFTState ::= INTEGER {
+ no-operation(0),
+ upload(1),
+ download(2)
+ }
+
+CsrFileFormat ::= INTEGER {
+ pem(1),
+ der(2)
+ }
+
+
+microwave-radio OBJECT IDENTIFIER ::= { enterprises 2281 }
+genEquip OBJECT IDENTIFIER ::= { microwave-radio 10}
+genEquipUnit OBJECT IDENTIFIER ::= { genEquip 1}
+
+
+--- Unit information
+genEquipUnitInfo OBJECT IDENTIFIER ::= { genEquipUnit 1}
+
+genEquipLastCfgTimeStamp OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "This parameter represents the configuration change counter.
+ On every conf. change this counter is increased by 1."
+ ::= { genEquipUnitInfo 1 }
+
+genEquipRealTimeandDate OBJECT-TYPE
+ SYNTAX OCTET STRING(SIZE(8))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This parameter specifies the real time and date
+ Format 'YYYY-MM-DD,HH:MM:SS' (Hexadecimal).
+ A date-time specification:
+
+ field octets contents range
+ ----- ------ -------- -----
+ 1 1-2 year 0..65536
+ 2 3 month 1..12
+ 3 4 day 1..31
+ 4 5 hour 0..23
+ 5 6 minutes 0..59
+ 6 7 seconds 0..60
+ (use 60 for leap-second)
+ 7 8 deci-seconds 0..9
+
+ For example, Tuesday May 26, 1992 at 1:30:15 PM EDT
+ would be displayed as: 07 c8 05 1a 0d 1e 0f 00
+ (1992 -5 -26, 13:30:15 )
+ "
+
+ ::= { genEquipUnitInfo 2 }
+
+genEquipPMGenTime OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+"This value indicates the generation time of the Performance Monitor file.
+The value is presented in time_t format."
+::= { genEquipUnitInfo 3 }
+
+genEquipInvGenTime OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+"This value indicates the generation time of the Inventory information file.
+The inventory file holds the configuration information of the unit.
+The value is presented in time_t format."
+::= { genEquipUnitInfo 4 }
+
+genEquipOperation OBJECT-TYPE
+ SYNTAX INTEGER{
+ noAction(0),
+ idcHwReset(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Enables to perform HW reset to the indoor unit."
+::= { genEquipUnitInfo 5 }
+
+genEquipMIBVersion OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+"This value indicates MIB version."
+::= { genEquipUnitInfo 6 }
+
+genEquipUnitCLLI OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..255))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+"This value represents a general purpose CLLI-like text field.
+The CLLI field is attached to traps generated from this NE."
+::= { genEquipUnitInfo 7 }
+
+genEquipUnitMeasurementSystem OBJECT-TYPE
+ SYNTAX MetricImperial
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+"This value represents the measurement system used by the system. (metric or imperal)."
+::= { genEquipUnitInfo 8 }
+
+
+genEquipUnitIduTemperature OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+"This value indicates the IDU temperature, according to the measurement system chosen.
+(genEquipUnitMeasurementSystem)"
+::= { genEquipUnitInfo 9 }
+
+genEquipUnitIduVoltageInput OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltages Input."
+::= { genEquipUnitInfo 10 }
+
+genEquipUnitInfoTime OBJECT IDENTIFIER ::= { genEquipUnitInfo 11}
+
+genEquipUnitGMTHours OBJECT-TYPE
+ SYNTAX INTEGER (-12..13)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This parameter represent the offset in hours from GMT."
+ ::= { genEquipUnitInfoTime 1 }
+
+genEquipUnitGMTMins OBJECT-TYPE
+ SYNTAX INTEGER (0..59)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This parameter represents the offset in minutes from GMT."
+ ::= { genEquipUnitInfoTime 2 }
+
+genEquipUnitDaylightSavingTimeStartMonth OBJECT-TYPE
+ SYNTAX INTEGER (1..12)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This parameter represents the start Month of the daylight saving time."
+ ::= { genEquipUnitInfoTime 7 }
+
+genEquipUnitDaylightSavingTimeStartDay OBJECT-TYPE
+ SYNTAX INTEGER (1..31)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This parameter represents the start Day of the daylight saving time."
+ ::= { genEquipUnitInfoTime 8 }
+
+
+genEquipUnitDaylightSavingTimeEndMonth OBJECT-TYPE
+ SYNTAX INTEGER (1..12)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This parameter represents the end month of the daylight saving time."
+ ::= { genEquipUnitInfoTime 9 }
+
+genEquipUnitDaylightSavingTimeEndDay OBJECT-TYPE
+ SYNTAX INTEGER (1..31)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This parameter represents the end day of the daylight saving time."
+ ::= { genEquipUnitInfoTime 10 }
+
+
+genEquipUnitDaylightSavingTimeOffset OBJECT-TYPE
+ SYNTAX INTEGER (0..23)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Daylight saving offset hours.
+ for a value different then '0', at the starting date of the daylight saving time
+ the time will jump forward in this value.
+ at the end date of the daylight saving time, the time will jump backwards in this value."
+ ::= { genEquipUnitInfoTime 11 }
+
+--
+-- Time services configuration table - time-services-config-table
+--
+genEquipUnitInfoTimeServicesTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipUnitInfoTimeServicesEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table contains the time services properties."
+ ::= { genEquipUnitInfoTime 12 }
+
+genEquipUnitInfoTimeServicesEntry OBJECT-TYPE
+ SYNTAX GenEquipUnitInfoTimeServicesEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table entry contains the time services properties."
+ INDEX { genEquipUnitInfoTimeServicesIndex }
+ ::= { genEquipUnitInfoTimeServicesTable 1 }
+
+GenEquipUnitInfoTimeServicesEntry ::=
+ SEQUENCE {
+ genEquipUnitInfoTimeServicesIndex
+ INTEGER,
+ genEquipUnitInfoTimeServicesUtcHours
+ INTEGER,
+ genEquipUnitInfoTimeServicesUtcMinutes
+ INTEGER,
+ genEquipUnitInfoTimeServicesDstStartMonth
+ INTEGER,
+ genEquipUnitInfoTimeServicesDstStartDay
+ INTEGER,
+ genEquipUnitInfoTimeServicesDstEndMonth
+ INTEGER,
+ genEquipUnitInfoTimeServicesDstEndDay
+ INTEGER,
+ genEquipUnitInfoTimeServicesDstOffset
+ INTEGER,
+ genEquipUnitInfoTimeServicesUtcDateAndTime
+ INTEGER,
+ genEquipUnitInfoTimeServicesUtcCurrentDateAndTime
+ INTEGER
+}
+
+genEquipUnitInfoTimeServicesIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The index of the table."
+::= { genEquipUnitInfoTimeServicesEntry 1 }
+
+genEquipUnitInfoTimeServicesUtcHours OBJECT-TYPE
+ SYNTAX INTEGER (-12..13)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The required hours offset relative to the UTC (Universal Time Coordinated)."
+::= { genEquipUnitInfoTimeServicesEntry 2 }
+
+genEquipUnitInfoTimeServicesUtcMinutes OBJECT-TYPE
+ SYNTAX INTEGER (0..59)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The required minutes offset relative to the UTC (Universal Time Coordinated)."
+::= { genEquipUnitInfoTimeServicesEntry 3 }
+
+genEquipUnitInfoTimeServicesDstStartMonth OBJECT-TYPE
+ SYNTAX INTEGER (1..12)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The month when the DST (Daylight Saving Time) is required to start."
+::= { genEquipUnitInfoTimeServicesEntry 4 }
+
+genEquipUnitInfoTimeServicesDstStartDay OBJECT-TYPE
+ SYNTAX INTEGER (1..31)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The day when the DST (Daylight Saving Time) is required to start."
+::= { genEquipUnitInfoTimeServicesEntry 5 }
+
+genEquipUnitInfoTimeServicesDstEndMonth OBJECT-TYPE
+ SYNTAX INTEGER (1..12)
+ ACCESS read-write STATUS mandatory
+ DESCRIPTION
+ "The month when the DST (Daylight Saving Time) is required to end."
+::= { genEquipUnitInfoTimeServicesEntry 6 }
+
+genEquipUnitInfoTimeServicesDstEndDay OBJECT-TYPE
+ SYNTAX INTEGER (1..31)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The day when the DST (Daylight Saving Time) is required to end."
+::= { genEquipUnitInfoTimeServicesEntry 7 }
+
+genEquipUnitInfoTimeServicesDstOffset OBJECT-TYPE
+ SYNTAX INTEGER (0..23)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The required offset for DST (Daylight Saving Time) in hours."
+::= { genEquipUnitInfoTimeServicesEntry 8 }
+
+genEquipUnitInfoTimeServicesUtcDateAndTime OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "UTC (Universal Time Coordinated) date and time."
+::= { genEquipUnitInfoTimeServicesEntry 9 }
+
+genEquipUnitInfoTimeServicesUtcCurrentDateAndTime OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The calculated current local date &amp; time based on the local clock, UTC and DST (Daylight Saving Time) configurations."
+::= { genEquipUnitInfoTimeServicesEntry 10 }
+
+
+
+genEquipUnitIduPowerSupply1AlarmAdmin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This parameter is relevant only for IDU with more than one power supply units.
+ The user can choose to disable (ignore the alarm) of one of the power supply units."
+::= { genEquipUnitInfo 12 }
+
+genEquipUnitIduPowerSupply2AlarmAdmin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This parameter is relevant only for IDU with more than two power supply units.
+ The user can choose to disable (ignore the alarm) of one of the power supply units."
+::= { genEquipUnitInfo 13 }
+
+genEquipUnitInfoNG OBJECT IDENTIFIER ::= { genEquipUnitInfo 14}
+
+genEquipUnitName OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The name of the system."
+::= { genEquipUnitInfoNG 1 }
+
+genEquipUnitDescription OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "A ahort description of the system."
+::= { genEquipUnitInfoNG 2 }
+
+genEquipUnitContactPerson OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Contact person."
+::= { genEquipUnitInfoNG 3 }
+
+genEquipUnitLocation OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The location of the system."
+::= { genEquipUnitInfoNG 4 }
+
+genEquipUnitLatitude OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The latitude of the system."
+::= { genEquipUnitInfoNG 5 }
+
+genEquipUnitLongitude OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The longitude of system."
+::= { genEquipUnitInfoNG 6 }
+
+genEquipUnitIpAddressType OBJECT-TYPE
+ SYNTAX INTEGER {
+ ipv4 (0),
+ ipv6 (1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "IP address Family."
+::= { genEquipUnitInfoNG 7 }
+
+genEquipUnitInfoNGTdmInterfaceStandard OBJECT-TYPE
+ SYNTAX INTEGER {
+ ets1(0),
+ ansi(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The TDM interface standard: ETSI (Erupean) or ANSI (North American)"
+::= { genEquipUnitInfoNG 8 }
+
+
+--- Unit NTP information
+genEquipUnitInfoNTP OBJECT IDENTIFIER ::= { genEquipUnitInfoTime 6}
+
+genEquipUnitInfoNTPAdmin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This parameter represents the NTP Admin state"
+::= { genEquipUnitInfoNTP 1 }
+
+genEquipUnitInfoNTPServerIP OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This parameter represents the IP address of the NTP Server"
+::= { genEquipUnitInfoNTP 2 }
+
+genEquipUnitInfoNTPStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ down(0),
+ up(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "This parameter represents the NTP Service status"
+::= { genEquipUnitInfoNTP 3 }
+
+genEquipUnitInfoNTPSync OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "This parameter returns the IP address of the NTP server, with which the system is currently synchronized.
+ Returned strings:
+ (i) - the IP address of the reference NTP server, according to IPv4/v6 format.
+ (ii) - 'LOCAL' if synchronized on local clock.
+ (iii) - 'N/A' if not synchronized. Valid only when admin is 'disabled'."
+::= { genEquipUnitInfoNTP 4 }
+
+genEquipUnitInfoNTPPollInterval OBJECT-TYPE
+ SYNTAX INTEGER (64..1024)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "This parameter represents the NTP polling interval in minutes"
+::= { genEquipUnitInfoNTP 5 }
+
+
+
+genEquipUnitInfoNtpStatusTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipUnitInfoNtpStatusEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table shows the status of the NTP (Network Time Protocol)."
+ ::= { genEquipUnitInfoNTP 6 }
+
+
+genEquipUnitInfoNtpStatusEntry OBJECT-TYPE
+ SYNTAX GenEquipUnitInfoNtpStatusEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Entry containing the data of the NTP status."
+ INDEX { genEquipUnitInfoNtpStatusIndex }
+ ::= { genEquipUnitInfoNtpStatusTable 1 }
+
+GenEquipUnitInfoNtpStatusEntry ::=
+ SEQUENCE {
+ genEquipUnitInfoNtpStatusIndex
+ INTEGER,
+ genEquipUnitInfoNtpStatusPollInterval
+ INTEGER,
+ genEquipUnitInfoNtpStatusSyncServerIP
+ IpAddress,
+ genEquipUnitInfoNtpStatusLockState
+ INTEGER
+ }
+
+genEquipUnitInfoNtpStatusIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Index of the table."
+ ::= { genEquipUnitInfoNtpStatusEntry 1 }
+
+genEquipUnitInfoNtpStatusPollInterval OBJECT-TYPE
+ SYNTAX INTEGER (0..1024)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates the time interval in minutes in which the NTP client polls the server it is locked to."
+ ::= { genEquipUnitInfoNtpStatusEntry 2 }
+
+genEquipUnitInfoNtpStatusSyncServerIP OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "he IPv4 address of the NTP server that the client is currently locked on."
+ ::= { genEquipUnitInfoNtpStatusEntry 3 }
+
+genEquipUnitInfoNtpStatusLockState OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0),
+ local(1),
+ locked(2)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates the NTP client lock status."
+ ::= { genEquipUnitInfoNtpStatusEntry 4 }
+
+
+
+
+genEquipUnitInfoNtpConfigTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipUnitInfoNtpConfigEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table allows the configuration of the NTP (Network Time Protocol)."
+ ::= { genEquipUnitInfoNTP 7 }
+
+genEquipUnitInfoNtpConfigEntry OBJECT-TYPE
+ SYNTAX GenEquipUnitInfoNtpConfigEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Entry containing the data of the NTP configuration."
+ INDEX { genEquipUnitInfoNtpConfigIndex }
+ ::= { genEquipUnitInfoNtpConfigTable 1 }
+
+GenEquipUnitInfoNtpConfigEntry ::=
+ SEQUENCE {
+ genEquipUnitInfoNtpConfigIndex
+ INTEGER,
+ genEquipUnitInfoNtpConfigAdmin
+ EnableDisable,
+ genEquipUnitInfoNtpConfigVersion
+ INTEGER,
+ genEquipUnitInfoNtpConfigServerIPaddress1
+ IpAddress,
+ genEquipUnitInfoNtpConfigServerIPaddress2
+ IpAddress
+ }
+
+genEquipUnitInfoNtpConfigIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Index of the table."
+ ::= { genEquipUnitInfoNtpConfigEntry 1 }
+
+genEquipUnitInfoNtpConfigAdmin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The administrative state of the NTP (Network Time Protocol) feature."
+ ::= { genEquipUnitInfoNtpConfigEntry 2 }
+
+genEquipUnitInfoNtpConfigVersion OBJECT-TYPE
+ SYNTAX INTEGER {
+ ntpv3(1),
+ ntpv4(2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The NTP (Network Time Protocol) version that is being used."
+ ::= { genEquipUnitInfoNtpConfigEntry 3 }
+
+genEquipUnitInfoNtpConfigServerIPaddress1 OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "NTP server IPv4 address that is required in first priority."
+ ::= { genEquipUnitInfoNtpConfigEntry 4 }
+
+genEquipUnitInfoNtpConfigServerIPaddress2 OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "NTP server IPv4 address that is required in second priority."
+ ::= { genEquipUnitInfoNtpConfigEntry 5 }
+
+
+
+--- Unit Serial information
+genEquipUnitInventory OBJECT IDENTIFIER ::= { genEquipUnit 2}
+
+genEquipUnitIDUSerialNumber OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "IDU Serial number."
+::= { genEquipUnitInventory 1 }
+
+genEquipUnitIDUPartNumber OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "IDU Part number."
+::= { genEquipUnitInventory 2 }
+
+-- Inventory common table inventory-common-table
+--
+genEquipUnitInventoryNG OBJECT IDENTIFIER ::= { genEquipUnitInventory 10}
+
+genEquipInventoryTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipInventoryEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "inventory common table."
+ ::= { genEquipUnitInventoryNG 1 }
+
+genEquipInventoryEntry OBJECT-TYPE
+ SYNTAX GenEquipInventoryEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "inventory common table Entry."
+ INDEX { genEquipInventorySlotIndex }
+ ::= { genEquipInventoryTable 1 }
+
+GenEquipInventoryEntry ::=
+ SEQUENCE {
+ genEquipInventorySlotIndex
+ INTEGER,
+ genEquipInventoryCardName
+ DisplayString,
+ genEquipInventoryCardType
+ InventoryCardType,
+ genEquipInventoryCardSubType
+ INTEGER,
+ genEquipInventoryPartNumber
+ DisplayString,
+ genEquipInventorySerialNumber
+ DisplayString,
+ genEquipInventoryNumberWorkingDays
+ INTEGER
+ }
+
+genEquipInventorySlotIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "slot index."
+ ::= { genEquipInventoryEntry 1 }
+
+genEquipInventoryCardName OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Card name."
+ ::= { genEquipInventoryEntry 2 }
+
+genEquipInventoryCardType OBJECT-TYPE
+ SYNTAX InventoryCardType
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Card type."
+ ::= { genEquipInventoryEntry 3 }
+
+genEquipInventoryCardSubType OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Card sub type."
+ ::= { genEquipInventoryEntry 4 }
+
+genEquipInventoryPartNumber OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Part number."
+ ::= { genEquipInventoryEntry 5 }
+
+genEquipInventorySerialNumber OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Serial number."
+ ::= { genEquipInventoryEntry 6 }
+
+genEquipInventoryNumberWorkingDays OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Number of working days."
+ ::= { genEquipInventoryEntry 7 }
+
+--
+--
+
+genEquipUnitLicenseInfo OBJECT IDENTIFIER ::= { genEquipUnit 3}
+
+genEquipUnitLicenseType OBJECT-TYPE
+ SYNTAX INTEGER {
+ default(0),
+ normal(1),
+ demo(2)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The unit license type."
+::= { genEquipUnitLicenseInfo 1 }
+
+genEquipUnitLicenseCode OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The user license code that determines the NE license rights."
+::= { genEquipUnitLicenseInfo 2 }
+
+genEquipUnitACMLicense OBJECT-TYPE
+ SYNTAX AllowedNotAllowed
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The ACM rights for the NE on the current license"
+::= { genEquipUnitLicenseInfo 3 }
+
+genEquipUnitSwitchAppLicense OBJECT-TYPE
+ SYNTAX INTEGER {
+ single-pipe(0),
+ switch(8)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The switch application rights for the NE on the current license.
+ Switch is either managed-switch or metro switch."
+::= { genEquipUnitLicenseInfo 4 }
+
+genEquipUnitCapacityLicense OBJECT-TYPE
+ SYNTAX INTEGER (10..510)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The radio capacity allowed for the NE on the current license"
+::= { genEquipUnitLicenseInfo 5 }
+
+genEquipUnitLicenseDemoAdmin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The Admin state of the demo mode."
+::= { genEquipUnitLicenseInfo 6 }
+
+genEquipUnitLicenseDemoTimer OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The Demo timer in hours"
+::= { genEquipUnitLicenseInfo 7}
+
+genEquipUnitLicenseSyncU OBJECT-TYPE
+ SYNTAX AllowedNotAllowed
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "This parameter indicates whether the synchronization unit license is allowed.
+ This license allows configuring synchronization sources for clock distribution."
+::= { genEquipUnitLicenseInfo 8}
+
+genEquipUnitLicenseNetworkResiliency OBJECT-TYPE
+ SYNTAX AllowedNotAllowed
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "This parameter indicates whether the network resiliency license is allowed.
+ This license allows configuring xSTP protocols and TDM path protection."
+::= { genEquipUnitLicenseInfo 9}
+
+genEquipUnitLicenseTDMCapacity OBJECT-TYPE
+ SYNTAX AllowedNotAllowed
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "This parameter indicates the number of TDM trails per radio
+ allowed by the current license, if allowed.
+ When TDM capacity license is allowed all scripts are allowed in the radio."
+::= { genEquipUnitLicenseInfo 10}
+
+genEquipUnitLicenseTDMCapacityValue OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "This parameter indicates the number of TDM trails per radio
+ allowed by the current license, if relevant.
+ The TDM capacity value is not relevant if the genEquipUnitLicenseTDMCapacity is not allowed."
+::= { genEquipUnitLicenseInfo 11}
+
+genEquipUnitLicensePerUsage OBJECT-TYPE
+ SYNTAX AllowedNotAllowed
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "This parameter indicates whether the per-usage license is allowed.
+ This license allows configuring all features and causes their use to be reported to NMS.
+ If the usage license is allowed, all other licenses are not relevant, as all the licenses are open
+ for configuration."
+::= { genEquipUnitLicenseInfo 12}
+
+genEquipUnitLicenseAsymScripts OBJECT-TYPE
+ SYNTAX AllowedNotAllowed
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "This parameter indicates whether the asymmetrical scripts license is allowed.
+ This license allows loading asymmetrical scripts."
+::= { genEquipUnitLicenseInfo 13}
+
+genEquipUnitLicenseDateCode OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "This parameter indicates the generation date and time of the current installed license. Format is 'YYYY-MM-DD,HH:MM:SS' (Hexadecimal)."
+::= { genEquipUnitLicenseInfo 14}
+
+genEquipUnitLicenseValidationNumber OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "This parameter indicates the validation number of the current installed license. It can be used as a proof (for LMS) that the license key was installed in order to get a downgrade refund."
+::= { genEquipUnitLicenseInfo 15}
+
+--
+-- License features table - license-features-table
+--
+
+genEquipUnitLicenseFeatureTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipUnitLicenseFeatureEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table shows for each feature what is its valid license and whether the license has been violated or not."
+ ::= { genEquipUnitLicenseInfo 16 }
+
+genEquipUnitLicenseFeatureEntry OBJECT-TYPE
+ SYNTAX GenEquipUnitLicenseFeatureEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table entry shows for each feature what is its valid license and whether the license has been violated or not."
+ INDEX { genEquipUnitLicenseFeatureId }
+ ::= { genEquipUnitLicenseFeatureTable 1 }
+
+GenEquipUnitLicenseFeatureEntry ::=
+ SEQUENCE {
+ genEquipUnitLicenseFeatureId
+ INTEGER,
+ genEquipUnitLicenseFeatureName
+ DisplayString,
+ genEquipUnitLicenseFeatureDescription
+ DisplayString,
+ genEquipUnitLicenseFeatureIsUsed
+ LicenseGeneric,
+ genEquipUnitLicenseFeatureIsAllowed
+ LicenseGeneric,
+ genEquipUnitLicenseViolationStatus
+ INTEGER
+}
+
+
+genEquipUnitLicenseFeatureId OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "A unique number which indicates the Id of the feature"
+::= { genEquipUnitLicenseFeatureEntry 1 }
+
+genEquipUnitLicenseFeatureName OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The name of the feature."
+::= { genEquipUnitLicenseFeatureEntry 2 }
+
+genEquipUnitLicenseFeatureDescription OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "A short description of the feature."
+::= { genEquipUnitLicenseFeatureEntry 3 }
+
+genEquipUnitLicenseFeatureIsUsed OBJECT-TYPE
+ SYNTAX LicenseGeneric
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the licensed feature is actually in used or its quantity that currently is in use."
+::= { genEquipUnitLicenseFeatureEntry 4 }
+
+genEquipUnitLicenseFeatureIsAllowed OBJECT-TYPE
+ SYNTAX LicenseGeneric
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether a licensed feature is allowed."
+::= { genEquipUnitLicenseFeatureEntry 5 }
+
+genEquipUnitLicenseViolationStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ ok(0),
+ violated(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the actual configuration violates the feature license."
+::= { genEquipUnitLicenseFeatureEntry 6 }
+
+
+-- License group continue
+genEquipUnitLicenseCutThrough OBJECT-TYPE
+ SYNTAX AllowedNotAllowed
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "This parameter indicates whether the cut-through license is allowed.
+ This license allows using the cut-through frames in the TM."
+::= { genEquipUnitLicenseInfo 20}
+
+genEquipUnitLicenseTdmInterfaceStandard OBJECT-TYPE
+ SYNTAX INTEGER {
+ ets1(0),
+ ansi(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "The TDM interface standard: ETSI (European) or ANSI (North American)."
+::= { genEquipUnitLicenseInfo 21}
+
+
+--- External Alarms
+genEquipUnitExternalAlarms OBJECT IDENTIFIER ::= { genEquipUnit 4}
+
+--- External Alarms - Alarm Input
+genEquipUnitAlarmInput OBJECT IDENTIFIER ::= { genEquipUnitExternalAlarms 1}
+
+genEquipUnitAlarmInputTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipUnitAlarmInputEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "External input alarm table.
+ Using the table to manage the admin state of the external input alarm (Enable or Disable it).
+ Set a description and severity."
+ ::= { genEquipUnitAlarmInput 1 }
+
+genEquipUnitAlarmInputEntry OBJECT-TYPE
+ SYNTAX GenEquipUnitAlarmInputEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "External input alarm table.
+ Using the table to manage the admin state of the external input alarm (Enable or Disable it).
+ Set a description and severity."
+ INDEX { genEquipUnitAlarmInputCounter }
+ ::= { genEquipUnitAlarmInputTable 1 }
+
+GenEquipUnitAlarmInputEntry ::=
+ SEQUENCE {
+ genEquipUnitAlarmInputCounter
+ INTEGER,
+ genEquipUnitAlarmInputAdmin
+ EnableDisableSMI2,
+ genEquipUnitAlarmInputText
+ DisplayString,
+ genEquipUnitAlarmInputSeverity
+ InputSeverity,
+ genEquipUnitAlarmInputState
+ OffOn
+}
+
+genEquipUnitAlarmInputCounter OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "External input alarm table index."
+::= { genEquipUnitAlarmInputEntry 1 }
+
+genEquipUnitAlarmInputAdmin OBJECT-TYPE
+ SYNTAX EnableDisableSMI2
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The Admin state of the External input alarm table."
+::= { genEquipUnitAlarmInputEntry 2 }
+
+genEquipUnitAlarmInputText OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..99))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "External input alarm description."
+::= { genEquipUnitAlarmInputEntry 3 }
+
+genEquipUnitAlarmInputSeverity OBJECT-TYPE
+ SYNTAX InputSeverity
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "External input alarm severity."
+::= { genEquipUnitAlarmInputEntry 4 }
+
+genEquipUnitAlarmInputState OBJECT-TYPE
+ SYNTAX OffOn
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The state, raised or cleared, of the external alarm input."
+::= { genEquipUnitAlarmInputEntry 5 }
+
+
+--- External Alarms - Alarm Output
+genEquipUnitAlarmOutput OBJECT IDENTIFIER ::= { genEquipUnitExternalAlarms 2}
+
+genEquipUnitAlarmOutputTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipUnitAlarmOutputEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "External output alarm table. using the table to manage the admin state of the external input alarm
+ , read the status and set an output group."
+ ::= { genEquipUnitAlarmOutput 1 }
+
+genEquipUnitAlarmOutputEntry OBJECT-TYPE
+ SYNTAX GenEquipUnitAlarmOutputEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "External output alarm table. using the table to manage the admin state of the external input alarm
+ , read the status and set an output group."
+ INDEX { genEquipUnitAlarmOutputCounter }
+ ::= { genEquipUnitAlarmOutputTable 1 }
+
+GenEquipUnitAlarmOutputEntry ::=
+ SEQUENCE {
+ genEquipUnitAlarmOutputCounter
+ INTEGER,
+ genEquipUnitAlarmOutputAdmin
+ INTEGER,
+ genEquipUnitAlarmOutputStatus
+ INTEGER,
+ genEquipUnitAlarmOutputGroup
+ INTEGER
+}
+
+genEquipUnitAlarmOutputCounter OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "External output alarm table index."
+::= { genEquipUnitAlarmOutputEntry 1 }
+
+genEquipUnitAlarmOutputAdmin OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0),
+ enable(1),
+ test(2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The Admin state of the External output alarm. When 'Enabled', the functionality will be:
+ (i) If no alarms are raised, the N.O. (normally open) contact will be opened,
+ while the N.C. (normally closed) contact will be connected to the COM contact.
+ (ii) When an alarm is raised, or the system power is OFF,
+ the N.O will be connected to the COM contact, while the N.C. contact will remain opened.
+ When 'Test' option is selected, the dry contacts behave as an alarm is raised in the system,
+ as described in case (ii) above."
+::= { genEquipUnitAlarmOutputEntry 2 }
+
+genEquipUnitAlarmOutputStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ on(1),
+ on-test(2)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The current stauts of the External output alarm table."
+
+::= { genEquipUnitAlarmOutputEntry 3 }
+
+genEquipUnitAlarmOutputGroup OBJECT-TYPE
+ SYNTAX INTEGER {
+ communication(1),
+ quality-of-service(2),
+ processing(3),
+ equipment(4),
+ environmental(5),
+ all-groups(6)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The description of the group to which the external output alarm belongs."
+::= { genEquipUnitAlarmOutputEntry 4 }
+
+-- Shelf Managment
+genEquipUnitShelf OBJECT IDENTIFIER ::= { genEquipUnit 5}
+
+genEquipUnitShelfInstallation OBJECT-TYPE
+ SYNTAX INTEGER {
+ standalone (0),
+ chassisModule(1) -- xc
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "This value indicates the NE installation type (standalone or module/card within a chassis). "
+::= { genEquipUnitShelf 1 }
+
+genEquipUnitShelfModuleRole OBJECT-TYPE
+ SYNTAX INTEGER {
+ main(0),
+ extention(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "This value indicates the NE module role (main unit or extention)."
+::= { genEquipUnitShelf 2 }
+
+genEquipUnitShelfSlotLabel OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..255))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Slot label is a user defined description for the module in the slot."
+::= { genEquipUnitShelf 3 }
+
+genEquipUnitShelfArchivesOperationStatus OBJECT-TYPE
+ SYNTAX ProgressStatus
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Shelf-wide configuration archives [backup/restore] operation status.
+ Used also when creating archive for unit info.
+ Relevant only for main units.
+ - ready(0)
+ - inProgress(1),
+ - success(2),
+ - failure(3)"
+::= { genEquipUnitShelf 4 }
+
+genEquipUnitShelfManagmentTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipUnitShelfManagmentEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table contains information about the IDUs that may be in the shelf (population, communication status, most severe alarm) and
+ provides the ability to backup/restore SW for each IDU.
+ Relevant only for main units."
+ ::= { genEquipUnitShelf 5 }
+
+genEquipUnitShelfManagmentEntry OBJECT-TYPE
+ SYNTAX GenEquipUnitShelfManagmentEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table keeps the shelf information on all the modules in the shelf (population, status, most severe alarm) and
+ provides the ability for backup/restore command or SW download.
+ Relevant only for main units."
+ INDEX { genEquipUnitShelfManagmentSlot }
+ ::= { genEquipUnitShelfManagmentTable 1 }
+
+GenEquipUnitShelfManagmentEntry ::=
+ SEQUENCE {
+ genEquipUnitShelfManagmentSlot
+ SlotId,
+ genEquipUnitShelfManagmentSlotPopulation
+ INTEGER,
+ genEquipUnitShelfManagmentCommunicationStatus
+ INTEGER,
+ genEquipUnitShelfManagmentSlotMostSevereAlarm
+ Severity,
+ genEquipUnitShelfManagmentMngSwCommand
+ SwCommand,
+ genEquipUnitShelfManagmentSlotReset
+ OffOn,
+ genEquipUnitShelfManagmentSlotIp
+ IpAddress
+}
+
+genEquipUnitShelfManagmentSlot OBJECT-TYPE
+ SYNTAX SlotId
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "This value is the slot number used as an index for this table."
+::= { genEquipUnitShelfManagmentEntry 1 }
+
+genEquipUnitShelfManagmentSlotPopulation OBJECT-TYPE
+ SYNTAX INTEGER {
+ not-present(0),
+ present(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Slot population state, which indicates if the slot is occupied or not.
+ Relevant only for main units."
+::= { genEquipUnitShelfManagmentEntry 2 }
+
+genEquipUnitShelfManagmentCommunicationStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ communicationDown(0), -- not alive
+ communicationUp(1) -- alive
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "This value indicates if the slot can be reached or not.
+ Relevant only for main units."
+::= { genEquipUnitShelfManagmentEntry 3 }
+
+genEquipUnitShelfManagmentSlotMostSevereAlarm OBJECT-TYPE
+ SYNTAX Severity
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "This value is the most severe alarm for the module on this slot.
+ Relevant only for main unit."
+::= { genEquipUnitShelfManagmentEntry 4 }
+
+genEquipUnitShelfManagmentMngSwCommand OBJECT-TYPE
+ SYNTAX SwCommand
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The command to be executed to manage SW versions.
+ Relevant only for main units.
+ Possible values are:
+ - noOperation(0)
+ - downloadUpgradeVersion(1)
+ - upgrade(2)
+ - rollback(3)
+ - downgrade(4)
+ - downloadDowngradeVersion(5)"
+::= { genEquipUnitShelfManagmentEntry 5 }
+
+genEquipUnitShelfManagmentSlotReset OBJECT-TYPE
+ SYNTAX OffOn
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This parameter Allows resetting specific unit according to genEquipUnitShelfManagmentSlot table index."
+::= { genEquipUnitShelfManagmentEntry 6 }
+
+genEquipUnitShelfManagmentSlotIp OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Slot SNMP Management IP address."
+::= { genEquipUnitShelfManagmentEntry 7 }
+
+genEquipUnitShelfReset OBJECT-TYPE
+ SYNTAX OffOn
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This parameter allows resetting of entire shelf."
+::= { genEquipUnitShelf 6 }
+
+genEquipUnitshelfAllODUAdmin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The unit is configured as all outdoor unit, enable or disable it."
+::= { genEquipUnitShelf 7 }
+
+
+genEquipUnitShelfSlotConfigTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipUnitShelfSlotConfigEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Slot configuration table."
+ ::= { genEquipUnitShelf 8 }
+
+genEquipUnitShelfSlotConfigEntry OBJECT-TYPE
+ SYNTAX GenEquipUnitShelfSlotConfigEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table allows configuration of card population parameters."
+ INDEX { genEquipUnitShelfSlotConfigSlotID }
+ ::= { genEquipUnitShelfSlotConfigTable 1 }
+
+GenEquipUnitShelfSlotConfigEntry ::=
+ SEQUENCE {
+ genEquipUnitShelfSlotConfigSlotID
+ SlotId,
+ genEquipUnitShelfSlotConfigExpectedCardType
+ InventoryCardType,
+ genEquipUnitShelfSlotConfigLabel
+ DisplayString,
+ genEquipUnitShelfSlotConfigAdmin
+ EnableDisable,
+ genEquipUnitShelfSlotConfigSlotReset
+ OffOn
+}
+
+genEquipUnitShelfSlotConfigSlotID OBJECT-TYPE
+ SYNTAX SlotId
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "This value is the slot number used as an index for this table."
+::= { genEquipUnitShelfSlotConfigEntry 1 }
+
+genEquipUnitShelfSlotConfigExpectedCardType OBJECT-TYPE
+ SYNTAX InventoryCardType
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Expected card type in current slot."
+::= { genEquipUnitShelfSlotConfigEntry 2 }
+
+genEquipUnitShelfSlotConfigLabel OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Slot label."
+::= { genEquipUnitShelfSlotConfigEntry 3 }
+
+genEquipUnitShelfSlotConfigAdmin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Slot admin state."
+::= { genEquipUnitShelfSlotConfigEntry 4 }
+
+genEquipUnitShelfSlotConfigSlotReset OBJECT-TYPE
+ SYNTAX OffOn
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This parameter Allows resetting specific unit according to genEquipUnitShelfManagmentSlot table index."
+::= { genEquipUnitShelfSlotConfigEntry 5 }
+
+
+
+genEquipUnitShelfTccConfigTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipUnitShelfTccConfigEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "TCC configuration table."
+ ::= { genEquipUnitShelf 9 }
+
+genEquipUnitShelfTccConfigEntry OBJECT-TYPE
+ SYNTAX GenEquipUnitShelfTccConfigEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table allows configuration of TCC population parameters."
+ INDEX { genEquipUnitShelfTccConfigSlotID }
+ ::= { genEquipUnitShelfTccConfigTable 1 }
+
+GenEquipUnitShelfTccConfigEntry ::=
+ SEQUENCE {
+ genEquipUnitShelfTccConfigSlotID
+ SlotId,
+ genEquipUnitShelfTccConfigExpectedCardType
+ InventoryCardType,
+ genEquipUnitShelfTccConfigLabel
+ DisplayString,
+ genEquipUnitShelfTccConfigAdmin
+ EnableDisable,
+ genEquipUnitShelfTccConfigReset
+ OffOn
+}
+
+genEquipUnitShelfTccConfigSlotID OBJECT-TYPE
+ SYNTAX SlotId
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "This value is the TCC slot number used as an index for this table."
+::= { genEquipUnitShelfTccConfigEntry 1 }
+
+genEquipUnitShelfTccConfigExpectedCardType OBJECT-TYPE
+ SYNTAX InventoryCardType
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Expected card type in current TCC slot."
+::= { genEquipUnitShelfTccConfigEntry 2 }
+
+genEquipUnitShelfTccConfigLabel OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "TCC label."
+::= { genEquipUnitShelfTccConfigEntry 3 }
+
+genEquipUnitShelfTccConfigAdmin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "TCC admin state."
+::= { genEquipUnitShelfTccConfigEntry 4 }
+
+genEquipUnitShelfTccConfigReset OBJECT-TYPE
+ SYNTAX OffOn
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This parameter Allows resetting specific unit according to genEquipUnitShelfManagmentSlot table index."
+::= { genEquipUnitShelfTccConfigEntry 5 }
+
+--
+-- Slot status table - generic-cards-status-table
+--
+
+genEquipUnitShelfSlotStatusTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipUnitShelfSlotStatusEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table contains information about the status of the cards currently inserted in the system."
+ ::= { genEquipUnitShelf 10 }
+
+genEquipUnitShelfSlotStatusEntry OBJECT-TYPE
+ SYNTAX GenEquipUnitShelfSlotStatusEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table entry contains information about the status of the cards currently inserted in the system."
+ INDEX { genEquipUnitShelfSlotStatusSlotID }
+ ::= { genEquipUnitShelfSlotStatusTable 1 }
+
+GenEquipUnitShelfSlotStatusEntry ::=
+ SEQUENCE {
+ genEquipUnitShelfSlotStatusSlotID
+ SlotId,
+ genEquipUnitShelfSlotStatusOccupancy
+ CardOccupancy,
+ genEquipUnitShelfSlotStatusAllowedCardTypes
+ Counter64,
+ genEquipUnitShelfSlotStatusCardType
+ InventoryCardType,
+ genEquipUnitShelfSlotStatusOperationalState
+ OperState,
+ genEquipUnitShelfSlotStatusCommunication
+ DownUp
+}
+
+genEquipUnitShelfSlotStatusSlotID OBJECT-TYPE
+ SYNTAX SlotId
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Slot where PW-LIC is inserted."
+::= { genEquipUnitShelfSlotStatusEntry 1 }
+
+genEquipUnitShelfSlotStatusOccupancy OBJECT-TYPE
+ SYNTAX CardOccupancy
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Slot Occupancy."
+::= { genEquipUnitShelfSlotStatusEntry 2 }
+
+genEquipUnitShelfSlotStatusAllowedCardTypes OBJECT-TYPE
+ SYNTAX Counter64
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "shelf slot allowed card types."
+::= { genEquipUnitShelfSlotStatusEntry 3 }
+
+genEquipUnitShelfSlotStatusCardType OBJECT-TYPE
+ SYNTAX InventoryCardType
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Shelf Slot card type."
+::= { genEquipUnitShelfSlotStatusEntry 4 }
+
+genEquipUnitShelfSlotStatusOperationalState OBJECT-TYPE
+ SYNTAX OperState
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Operational State."
+::= { genEquipUnitShelfSlotStatusEntry 5 }
+
+genEquipUnitShelfSlotStatusCommunication OBJECT-TYPE
+ SYNTAX DownUp
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Slot Operational State."
+::= { genEquipUnitShelfSlotStatusEntry 6 }
+
+--
+-- traffic-and-control-status-cards-table - shelf-TCC-status-cards-table
+--
+
+genEquipUnitShelfTccStatusTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipUnitShelfTccStatusEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table contains information about the status of the TCC currently inserted in the system."
+ ::= { genEquipUnitShelf 11 }
+
+genEquipUnitShelfTccStatusEntry OBJECT-TYPE
+ SYNTAX GenEquipUnitShelfTccStatusEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table entry contains information about the status of the TCC currently inserted in the system."
+ INDEX { genEquipUnitShelfTccStatusSlotID }
+ ::= { genEquipUnitShelfTccStatusTable 1 }
+
+GenEquipUnitShelfTccStatusEntry ::=
+ SEQUENCE {
+ genEquipUnitShelfTccStatusSlotID
+ SlotId,
+ genEquipUnitShelfTccStatusOccupancy
+ CardOccupancy,
+ genEquipUnitShelfTccStatusAllowedCardTypes
+ Counter64,
+ genEquipUnitShelfTccStatusCardType
+ InventoryCardType,
+ genEquipUnitShelfTccStatusOperationalState
+ OperState,
+ genEquipUnitShelfTccStatusCommunication
+ DownUp
+}
+
+genEquipUnitShelfTccStatusSlotID OBJECT-TYPE
+ SYNTAX SlotId
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Slot where PW-LIC is inserted."
+::= { genEquipUnitShelfTccStatusEntry 1 }
+
+genEquipUnitShelfTccStatusOccupancy OBJECT-TYPE
+ SYNTAX CardOccupancy
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Slot Occupancy."
+::= { genEquipUnitShelfTccStatusEntry 2 }
+
+genEquipUnitShelfTccStatusAllowedCardTypes OBJECT-TYPE
+ SYNTAX Counter64
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "shelf slot allowed card types."
+::= { genEquipUnitShelfTccStatusEntry 3 }
+
+genEquipUnitShelfTccStatusCardType OBJECT-TYPE
+ SYNTAX InventoryCardType
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Shelf Slot card type."
+::= { genEquipUnitShelfTccStatusEntry 4 }
+
+genEquipUnitShelfTccStatusOperationalState OBJECT-TYPE
+ SYNTAX OperState
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Operational State."
+::= { genEquipUnitShelfTccStatusEntry 5 }
+
+genEquipUnitShelfTccStatusCommunication OBJECT-TYPE
+ SYNTAX DownUp
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Slot Operational State."
+::= { genEquipUnitShelfTccStatusEntry 6 }
+
+--
+-- Alarms Counter Table - alarm-services-per-slot-counter-table
+--
+genEquipUnitShelfManagmentSeverityTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipUnitShelfManagmentSeverityEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table indicates the number of current raised alarms per slot."
+ ::= { genEquipUnitShelf 12 }
+
+genEquipUnitShelfManagmentSeverityEntry OBJECT-TYPE
+ SYNTAX GenEquipUnitShelfManagmentSeverityEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table entry indicates the number of current raised alarms per slot."
+ INDEX { genEquipUnitShelfManagmentSeveritySlot }
+ ::= { genEquipUnitShelfManagmentSeverityTable 1 }
+
+GenEquipUnitShelfManagmentSeverityEntry ::=
+ SEQUENCE {
+ genEquipUnitShelfManagmentSeveritySlot
+ INTEGER,
+ genEquipUnitShelfManagmentSeverityCritical
+ INTEGER,
+ genEquipUnitShelfManagmentSeverityMajor
+ INTEGER,
+ genEquipUnitShelfManagmentSeverityMinor
+ INTEGER,
+ genEquipUnitShelfManagmentSeverityWarning
+ INTEGER,
+ genEquipUnitShelfManagmentSeverityIndeterminate
+ INTEGER
+}
+
+genEquipUnitShelfManagmentSeveritySlot OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The slot ID number that identifies it."
+::= { genEquipUnitShelfManagmentSeverityEntry 1 }
+
+genEquipUnitShelfManagmentSeverityCritical OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The number of alarms with 'Critical' severity."
+::= { genEquipUnitShelfManagmentSeverityEntry 2 }
+
+genEquipUnitShelfManagmentSeverityMajor OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The number of alarms with 'Major' severity."
+::= { genEquipUnitShelfManagmentSeverityEntry 3 }
+
+genEquipUnitShelfManagmentSeverityMinor OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The number of alarms with 'Minor' severity."
+::= { genEquipUnitShelfManagmentSeverityEntry 4 }
+
+genEquipUnitShelfManagmentSeverityWarning OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The number of alarms with 'Warning' severity."
+::= { genEquipUnitShelfManagmentSeverityEntry 5 }
+
+genEquipUnitShelfManagmentSeverityIndeterminate OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The number of alarms with 'Indeterminate' severity."
+::= { genEquipUnitShelfManagmentSeverityEntry 6 }
+
+--
+-- pdc-and-fan-cards-table - pdc-and-fan-cards-table
+--
+
+genEquipUnitShelfPdcFanStatusTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipUnitShelfPdcFanStatusEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table shows for fun card."
+ ::= { genEquipUnitShelf 13 }
+
+genEquipUnitShelfPdcFanStatusEntry OBJECT-TYPE
+ SYNTAX GenEquipUnitShelfPdcFanStatusEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table shows for fun card."
+ INDEX { genEquipUnitShelfPdcFanStatusPdcFanId }
+ ::= { genEquipUnitShelfPdcFanStatusTable 1 }
+
+GenEquipUnitShelfPdcFanStatusEntry ::=
+ SEQUENCE {
+ genEquipUnitShelfPdcFanStatusPdcFanId
+ INTEGER,
+ genEquipUnitShelfPdcFanStatusPdcFanExMonitor
+ EnableDisable,
+ genEquipUnitShelfPdcFanStatusPdcFanOccupancy
+ CardOccupancy,
+ genEquipUnitShelfPdcFanStatusPdcFanCardType
+ InventoryCardType
+}
+
+
+genEquipUnitShelfPdcFanStatusPdcFanId OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "pdc-fan-id"
+::= { genEquipUnitShelfPdcFanStatusEntry 1 }
+
+genEquipUnitShelfPdcFanStatusPdcFanExMonitor OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "pdc-fan-existent monitor."
+::= { genEquipUnitShelfPdcFanStatusEntry 2 }
+
+genEquipUnitShelfPdcFanStatusPdcFanOccupancy OBJECT-TYPE
+ SYNTAX CardOccupancy
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "card_occupancy."
+::= { genEquipUnitShelfPdcFanStatusEntry 3 }
+
+genEquipUnitShelfPdcFanStatusPdcFanCardType OBJECT-TYPE
+ SYNTAX InventoryCardType
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the licensed feature is actually in used or its quantity that currently is in use."
+::= { genEquipUnitShelfPdcFanStatusEntry 4 }
+
+--
+-- ABC MUX configuration table - shelf-abc-mux-configuration-table
+--
+
+genEquipUnitShelfAbcMuxTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipUnitShelfAbcMuxEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table allows enabling/disabling each ABC MUX group.
+ ABC groups can be defined on top of these MUX."
+ ::= { genEquipUnitShelf 14 }
+
+genEquipUnitShelfAbcMuxEntry OBJECT-TYPE
+ SYNTAX GenEquipUnitShelfAbcMuxEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table entry allows enabling/disabling each ABC MUX group.
+ ABC groups can be defined on top of these MUX."
+ INDEX { genEquipUnitShelfAbcMuxNumber }
+ ::= { genEquipUnitShelfAbcMuxTable 1 }
+
+GenEquipUnitShelfAbcMuxEntry ::=
+ SEQUENCE {
+ genEquipUnitShelfAbcMuxNumber
+ INTEGER,
+ genEquipUnitShelfAbcMuxAdmin
+ EnableDisable
+}
+
+
+genEquipUnitShelfAbcMuxNumber OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Identifier for each of the possible MUXs which choose between using the ABC trunks
+ or the port for multi-directional radios"
+::= { genEquipUnitShelfAbcMuxEntry 1 }
+
+genEquipUnitShelfAbcMuxAdmin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Enables the MUX (for ABC) or disables it (for multi-directional radios)."
+::= { genEquipUnitShelfAbcMuxEntry 2 }
+
+--
+-- Scalars
+--
+genEquipUnitShelfMultiplexTrafficSource OBJECT-TYPE
+ SYNTAX INTEGER (1..12)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The parameter multiplex traffic between slot 1 and slot 12."
+::= { genEquipUnitShelf 23 }
+
+genEquipUnitShelfMaskUnderVoltageAlarmFirstPowerFeed OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Mask undervoltage alarm on 1st DC power feed."
+::= { genEquipUnitShelf 24 }
+
+genEquipUnitShelfMaskUnderVoltageAlarmSecondPowerFeed OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Mask undervoltage alarm on 2nd DC power feed"
+::= { genEquipUnitShelf 25 }
+
+
+-- Protection
+genEquipProtection OBJECT IDENTIFIER ::= {genEquipUnit 6}
+
+genEquipProtectionAdmin OBJECT-TYPE
+ SYNTAX INTEGER {
+ protection1Plus1Hsb(2),
+ protectionDisable(3),
+ protection2Plus2Hsb(4),
+ protection2Plus0Hsb(5)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The Admin mode of the protection.
+ In case of protection2Plus2Hsb this parameter should be configured in
+ the main and extension slots."
+ ::= { genEquipProtection 1 }
+
+genEquipProtectionMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ active(0),
+ standby(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "In protection mode, the card can be either active or standby"
+ ::= { genEquipProtection 2 }
+
+genEquipProtectionMateIPAddr OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Same parameter as genEquipNetworkMateIp.
+ In case of 1+1 protection it is the protected card (Mate) IP address.
+ In case of 2+2 protection it is the IP address of the protected unit."
+ ::= { genEquipProtection 3 }
+
+genEquipProtectionMateMACAddr OBJECT-TYPE
+ SYNTAX MacAddress
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "In case of 1+1 protection it is protected card (Mate) MAC address
+ In case of 2+2 protection it is the IP address of the protected unit."
+ ::= { genEquipProtection 4 }
+
+genEquipProtectionRadioExcessiveBERSwitch OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The Admin state of an Excessive BER threshold. When enabled, crossing the Excessive BER threshold will cause
+ a protection switch."
+ ::= { genEquipProtection 5 }
+
+genEquipProtectionLockout OBJECT-TYPE
+ SYNTAX OffOn
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This parameter provides the ability to lock the mode of each card in the protection,
+ meaning to force the fact that protection switch will not occur."
+ ::= { genEquipProtection 6 }
+
+genEquipProtectionForceSwitch OBJECT-TYPE
+ SYNTAX OffOn
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This parameter is a command that forces a protection switch regardless of the state of the standby card."
+ ::= { genEquipProtection 7 }
+
+genEquipProtectionManualSwitch OBJECT-TYPE
+ SYNTAX OffOn
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This parameter is a command that performs manaual protection switch."
+ ::= { genEquipProtection 8 }
+
+genEquipProtectionCopyToMateComand OBJECT-TYPE
+ SYNTAX OffOn
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Setting this parameter to On will copy configured parameters from the active to the standby unit."
+ ::= { genEquipProtection 9 }
+
+genEquipProtectionCopyToMateStatus OBJECT-TYPE
+ SYNTAX ProgressStatus
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "This parameter represents the status of the copy-to-mate command when protection is enabled.
+ - ready(0)
+ - inProgress(1),
+ - success(2),
+ - failure(3)"
+ ::= { genEquipProtection 10 }
+
+genEquipProtectionMultiUnitLAGAdmin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This parameter enables the Multi Unit LAG feature.
+ It can be activated only in Single Pipe configuration and only when protection is active (either 1+1 or 2+2)."
+ ::= { genEquipProtection 11 }
+
+genEquipProtectionRevertiveAdmin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Enable/Disable revertive protection mode. In revertive protection mode one IDU will be defined as a Primary and the other will be Secondary.
+ Revertive protection will always tend to make the Primary IDU active unless it has a hardware failure."
+ ::= { genEquipProtection 12 }
+
+genEquipProtectionRevertivePrimaryIDU OBJECT-TYPE
+ SYNTAX INTEGER {
+ lower(0),
+ upper(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Decides whether upper or lower IDU will be primary. When placed in a shelf, the upper will be the upper slot in the shelf.
+ When working in stand-alone mode, the IDU with the highest IP address will be considered as upper."
+ ::= { genEquipProtection 13 }
+
+genEquipProtectionRevertiveMinTimer OBJECT-TYPE
+ SYNTAX INTEGER (1..30)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Minimal revertive protection timer period."
+ ::= { genEquipProtection 14 }
+
+genEquipProtectionRevertiveMaxNumOfTries OBJECT-TYPE
+ SYNTAX INTEGER (0..10)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Maximal number of revertive protection tries. Used to prevent instability. Revertive protection will give up trying to switch
+ to the primary standby IDU path after the maximal number of tries. Setting Zero value will enable revertive protection switch only
+ if the last protection switch was due to a local equipment failure."
+ ::= { genEquipProtection 15 }
+
+genEquipProtectionRevertiveTimerMultiplier OBJECT-TYPE
+ SYNTAX INTEGER (1..10)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "A factor that increases the revertive timer period after each try. Setting 1 value will leave the timer period constantly at its minimal value."
+ ::= { genEquipProtection 16 }
+
+genEquipProtectionAspRevertive OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "n Smart Pipe HSB mode , this parameter causes the Ethernet line port to be muted upon a complete failure of
+ the radio signal (in both active and standby units)"
+ ::= { genEquipProtection 17 }
+
+
+--
+genEquipDiversity OBJECT IDENTIFIER ::= {genEquipUnit 7}
+
+genEquipDiversityType OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(1),
+ space-diversity (2),
+ frequency-diversity (3)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "this parameter sets the type of hitless diversity to be used.
+ Notice that only if protection is enabled this has any effect."
+ ::= { genEquipDiversity 1 }
+
+genEquipDiversityRevertiveMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ non-revertive(1),
+ revertive(2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "this parameter sets whether hitless switches are revertive in the event that
+ the primary radio channel doesn't have any errors."
+ ::= { genEquipDiversity 2 }
+
+genEquipDiversityPrimaryRadio OBJECT-TYPE
+ SYNTAX INTEGER {
+ upper-radio(1),
+ lower-radio(2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "this parameter sets which IDU contains the primary radio channel to revert to."
+ ::= { genEquipDiversity 3 }
+
+genEquipDiversityRevertiveTimer OBJECT-TYPE
+ SYNTAX INTEGER (1..15)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This parameter sets the amount of seconds that must pass without a failure in
+ the primary radio before doing a revertive switch."
+ ::= { genEquipDiversity 4 }
+
+genEquipDiversityForceActive OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0),
+ local-radio(1),
+ mate-radio(2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This parameter allows forcing incoming traffic to be taken from either of
+ the radios (or none) for testing purposes."
+ ::= { genEquipDiversity 5 }
+
+genEquipDiversitySwitchCounter OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "This parameter shows the number of hitless switches performed since last time counter was cleared."
+ ::= { genEquipDiversity 6 }
+
+genEquipDiversitySwitchCounterClear OBJECT-TYPE
+ SYNTAX OffOn
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This parameter allows clearing of switch counter."
+ ::= { genEquipDiversity 7 }
+
+genEquipDiversityReceiveRadio OBJECT-TYPE
+ SYNTAX INTEGER {
+ lower-idu(0),
+ upper-idu(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "This parameter shows from which radio the traffic is currently being taken."
+ ::= { genEquipDiversity 8 }
+
+
+-- Faults
+genEquipFault OBJECT IDENTIFIER ::= { genEquip 3}
+
+-- Current Alarms
+genEquipCurrentAlarm OBJECT IDENTIFIER ::= {genEquipFault 1}
+
+genEquipCurrentAlarmLastChangeCounter OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "This counter is initialized with a random number after resest,
+ and incremented on each change in the CurrentAlarmTable"
+ ::= { genEquipCurrentAlarm 1 }
+
+genEquipCurrentAlarmTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipCurrentAlarmEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table includes the current alarm (when a RAISED trap is
+ sent, an alarm is added to the table, when a CLEAR trap is sent,
+ the alarm is removed)."
+ ::= { genEquipCurrentAlarm 2 }
+
+genEquipCurrentAlarmEntry OBJECT-TYPE
+ SYNTAX GenEquipCurrentAlarmEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Entry containing the info of current RAISED traps."
+ INDEX { genEquipCurrentAlarmCounter }
+ ::= { genEquipCurrentAlarmTable 1 }
+
+GenEquipCurrentAlarmEntry ::=
+ SEQUENCE {
+ genEquipCurrentAlarmCounter
+ INTEGER,
+ genEquipCurrentAlarmRaisedTimeT
+ INTEGER,
+ genEquipCurrentAlarmId
+ INTEGER,
+ genEquipCurrentAlarmName
+ DisplayString,
+ genEquipCurrentAlarmInstance
+ INTEGER,
+ genEquipCurrentAlarmSeverity
+ Severity,
+ genEquipCurrentAlarmIfIndex
+ INTEGER,
+ genEquipCurrentAlarmModule
+ DisplayString,
+ genEquipCurrentAlarmDesc
+ DisplayString,
+ genEquipCurrentAlarmProbableCause
+ DisplayString,
+ genEquipCurrentAlarmCorrectiveActions
+ DisplayString,
+ genEquipCurrentAlarmState
+ INTEGER,
+ genEquipCurrentAlarmSlotId
+ INTEGER,
+ genEquipCurrentAlarmAdditionalInfo
+ DisplayString,
+ genEquipCurrentAlarmUserText
+ DisplayString
+}
+
+genEquipCurrentAlarmCounter OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "A running counter of open alarms, incremented upon each new alarm."
+ ::= { genEquipCurrentAlarmEntry 1 }
+
+
+genEquipCurrentAlarmRaisedTimeT OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The rasied time of this alarm.
+ Time in seconds since January 1, 1970 00:00 UTC."
+ ::= { genEquipCurrentAlarmEntry 2 }
+
+genEquipCurrentAlarmId OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Alarm ID. List of alarm IDs is available in the MIB Ref. Guide."
+ ::= { genEquipCurrentAlarmEntry 3 }
+
+genEquipCurrentAlarmName OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Alarm name (the parameter and entity in the CLI) for example
+ 'radio/framer/radio-lof'"
+ ::= { genEquipCurrentAlarmEntry 4 }
+
+genEquipCurrentAlarmInstance OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "In the case of alarms that may have several appereances (at interfaces, channels, VCs, etc.), this parameter indicates the instance of the alarm."
+ ::= { genEquipCurrentAlarmEntry 5 }
+
+genEquipCurrentAlarmSeverity OBJECT-TYPE
+ SYNTAX Severity
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The current Alarm severity
+ the values can be:
+ - indeterminate(0)
+ - critical(1)
+ - major(2)
+ - minor(3)
+ - warning(4)
+ - cleared(5)"
+ DEFVAL { indeterminate }
+ ::= { genEquipCurrentAlarmEntry 6 }
+
+
+genEquipCurrentAlarmIfIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Interface Index where the alarm occurred, alarms that are
+ not associated with specific interfaces will have the following value:
+ For a non-interface alarm, the value is: 65001"
+ ::= { genEquipCurrentAlarmEntry 7 }
+
+genEquipCurrentAlarmModule OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The module of the alarm.
+ Possible values are 'IDU' or 'RFU'."
+ ::= {genEquipCurrentAlarmEntry 8}
+
+genEquipCurrentAlarmDesc OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The alarm description (same as the description in the sent trap)."
+ ::= { genEquipCurrentAlarmEntry 9}
+
+genEquipCurrentAlarmProbableCause OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The alarm probable cause."
+ ::= { genEquipCurrentAlarmEntry 10}
+
+genEquipCurrentAlarmCorrectiveActions OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The alarm corrective actions."
+ ::= { genEquipCurrentAlarmEntry 11 }
+
+genEquipCurrentAlarmState OBJECT-TYPE
+ SYNTAX INTEGER{
+ cleared(0),
+ raised(1),
+ event(2)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The state of the alarm (cleared or rasied)."
+ ::= { genEquipCurrentAlarmEntry 12 }
+
+genEquipCurrentAlarmSlotId OBJECT-TYPE
+ SYNTAX SlotId
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The ID of the slot originating the alarm."
+ ::= { genEquipCurrentAlarmEntry 13 }
+
+genEquipCurrentAlarmAdditionalInfo OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Additional information that may further qualify the source of the alarm."
+ ::= { genEquipCurrentAlarmEntry 14 }
+
+genEquipCurrentAlarmUserText OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "An additional description of the event or fault, or any other information that user wants to attach to it."
+ ::= { genEquipCurrentAlarmEntry 15 }
+
+-- Just like current alarm
+genEquipMostSevereAlarm OBJECT-TYPE
+ SYNTAX Severity
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The severity of the most severe alarm in the system"
+ ::= { genEquipCurrentAlarm 3 }
+
+genEquipAlarmConfigDefault OBJECT-TYPE
+ SYNTAX OffOn
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Allows to revert back to the default values of all alarm configurations"
+ ::= { genEquipCurrentAlarm 4 }
+
+--
+-- Alarm Configuration - alarm-services-configuration-table
+--
+genEquipAlarmConfigTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipAlarmConfigEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table allows system alarms configuration."
+ ::= { genEquipCurrentAlarm 5 }
+
+genEquipAlarmConfigEntry OBJECT-TYPE
+ SYNTAX GenEquipAlarmConfigEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table entry allows system alarms configuration."
+ INDEX { genEquipAlarmConfigId }
+ ::= { genEquipAlarmConfigTable 1 }
+
+GenEquipAlarmConfigEntry ::=
+ SEQUENCE {
+ genEquipAlarmConfigId
+ INTEGER,
+ genEquipAlarmConfigSeverity
+ Severity,
+ genEquipAlarmConfigDescr
+ DisplayString,
+ genEquipAlarmConfigAdditionalText
+ DisplayString,
+ genEquipAlarmServiceAffect
+ OffOn
+}
+
+genEquipAlarmConfigId OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "he alarm unique Id number that identifies it."
+ ::= { genEquipAlarmConfigEntry 1 }
+
+
+genEquipAlarmConfigSeverity OBJECT-TYPE
+ SYNTAX Severity
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The perceived severity of the raised alarm."
+ ::= { genEquipAlarmConfigEntry 2 }
+
+genEquipAlarmConfigDescr OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The description of the raised alarm."
+ ::= { genEquipAlarmConfigEntry 3 }
+
+genEquipAlarmConfigAdditionalText OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "An additional description of the fault, or any other information that user wants to attach to it."
+ ::= { genEquipAlarmConfigEntry 4 }
+
+genEquipAlarmServiceAffect OBJECT-TYPE
+ SYNTAX OffOn
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the raised alarm affects a service."
+ ::= { genEquipAlarmConfigEntry 5 }
+
+
+
+-- Traps configuration.
+genEquipTrapCfg OBJECT IDENTIFIER ::= {genEquipFault 2}
+
+genEquipTrapCfgMgrTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipTrapCfgMgrEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table indicates the Trap manager list."
+ ::= { genEquipTrapCfg 1 }
+
+genEquipTrapCfgMgrEntry OBJECT-TYPE
+ SYNTAX GenEquipTrapCfgMgrEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Entry containing the manager IP addresses and the trap filter options."
+ INDEX { genEquipTrapCfgMgrId}
+ ::= { genEquipTrapCfgMgrTable 1 }
+
+GenEquipTrapCfgMgrEntry ::=
+ SEQUENCE {
+ genEquipTrapCfgMgrId INTEGER,
+ genEquipTrapCfgMgrAdmin EnableDisable,
+ genEquipTrapCfgMgrIP IpAddress,
+ genEquipTrapCfgMgrPort INTEGER,
+ genEquipTrapCfgMgrName DisplayString,
+ genEquipTrapCfgMgrCommunity DisplayString,
+ genEquipTrapCfgMgrSeverityFilter INTEGER,
+ genEquipTrapCfgMgrStatusChangeFilter OffOn,
+ genEquipTrapCfgMgrCLLI DisplayString,
+ genEquipTrapCfgMgrHeartbeatPeriod INTEGER,
+ genEquipTrapCfgMgrIPv6 OCTET STRING,
+ genEquipTrapCfgMgrV3User DisplayString
+ }
+
+genEquipTrapCfgMgrId OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "This value indicates an index of a specific manager"
+ ::= { genEquipTrapCfgMgrEntry 1 }
+
+genEquipTrapCfgMgrAdmin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This value indicates an administrative state of a specific manager.
+ disable - will not send traps to this trap manager."
+ ::= { genEquipTrapCfgMgrEntry 2 }
+
+genEquipTrapCfgMgrIP OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This value indicates the manager's IP address."
+ ::= { genEquipTrapCfgMgrEntry 3 }
+
+genEquipTrapCfgMgrPort OBJECT-TYPE
+ SYNTAX INTEGER (70..65535)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The Port for sending the trap for each manager (possible values: 70-65535)"
+ DEFVAL { 162 }
+ ::= { genEquipTrapCfgMgrEntry 4 }
+
+genEquipTrapCfgMgrName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..30))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The name of the manager configured to receive the traps"
+ ::= { genEquipTrapCfgMgrEntry 5 }
+
+genEquipTrapCfgMgrCommunity OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..30))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The manager trap community configured."
+ ::= { genEquipTrapCfgMgrEntry 6 }
+
+ genEquipTrapCfgMgrSeverityFilter OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This is a bit mask value for masking traps according to its severity.
+ There is a bit for each severity. If the relevant bit is on (1),
+ the Agent will send traps with this severity. It won't send traps if the
+ bit is off (0).
+ The list of bits from LSB to MSB:
+ Bit 1 (LSB) - indeterminate
+ Bit 2 - critical
+ Bit 3 - major
+ Bit 4 - minor
+ Bit 5 - warning
+ Bit 6 - cleared "
+ ::= { genEquipTrapCfgMgrEntry 7 }
+
+genEquipTrapCfgMgrStatusChangeFilter OBJECT-TYPE
+ SYNTAX OffOn
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This value represents the mode in which the traps are sent:
+ If the filter is set to ON - only traps that change the severity of the system are sent.
+ If the filter is set to OFF - all traps (that are not screened by other filters) are sent."
+ ::= { genEquipTrapCfgMgrEntry 8 }
+
+
+genEquipTrapCfgMgrCLLI OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..100))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Common Language Location Identifier (maximum length: 100 chars)"
+ ::= { genEquipTrapCfgMgrEntry 9 }
+
+genEquipTrapCfgMgrHeartbeatPeriod OBJECT-TYPE
+ SYNTAX INTEGER (0..1440)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This item defines the interval (in minutes) between each heartbeat trap.
+ A value of '0' disables this feature."
+ DEFVAL { 0 }
+ ::= { genEquipTrapCfgMgrEntry 10 }
+
+genEquipTrapCfgMgrIPv6 OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..16))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The IP-v6 address of the trap manage)"
+ ::= { genEquipTrapCfgMgrEntry 11 }
+
+genEquipTrapCfgMgrV3User OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The manager trap V3 user name configured"
+ ::= { genEquipTrapCfgMgrEntry 12 }
+
+
+-- Event Log
+genEquipEventLog OBJECT IDENTIFIER ::= {genEquipFault 3}
+
+genEquipEventLogTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipEventLogEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table includes the event log."
+ ::= { genEquipEventLog 1 }
+
+genEquipEventLogEntry OBJECT-TYPE
+ SYNTAX GenEquipEventLogEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Entry containing the info of the event log table."
+ INDEX { genEquipEventLogCounter }
+ ::= { genEquipEventLogTable 1 }
+
+GenEquipEventLogEntry ::=
+ SEQUENCE {
+ genEquipEventLogCounter
+ INTEGER,
+ genEquipEventLogRaisedTimeT
+ INTEGER,
+ genEquipEventLogSeverity
+ Severity,
+ genEquipEventLogModule
+ DisplayString,
+ genEquipEventLogDesc
+ DisplayString,
+ genEquipEventLogState
+ INTEGER,
+ genEquipEventLogProbableCause
+ DisplayString,
+ genEquipEventLogCorrectiveActions
+ DisplayString,
+ genEquipEventLogAdditionalInfo
+ DisplayString,
+ genEquipEventLogUserText
+ DisplayString,
+ genEquipEventLogIfIndex
+ INTEGER,
+ genEquipEventLogId
+ INTEGER
+}
+
+genEquipEventLogCounter OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The event counter."
+ ::= { genEquipEventLogEntry 1 }
+
+
+genEquipEventLogRaisedTimeT OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The rasied time of this event.
+ Time in seconds since January 1, 1970 00:00 UTC. (time_t format)"
+ ::= { genEquipEventLogEntry 2 }
+
+genEquipEventLogSeverity OBJECT-TYPE
+ SYNTAX Severity
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The event severity, possible values are:
+ - indeterminate(0),
+ - critical(1)
+ - major(2)
+ - minor(3)
+ - warning(4)
+ - cleared(5)"
+ ::= { genEquipEventLogEntry 3 }
+
+genEquipEventLogModule OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The module of the event. ('IDU' or 'RFU')"
+ ::= { genEquipEventLogEntry 4 }
+
+genEquipEventLogDesc OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The event description (same as the description in the sent trap)."
+ ::= { genEquipEventLogEntry 5 }
+
+genEquipEventLogState OBJECT-TYPE
+ SYNTAX INTEGER{
+ cleared(0),
+ raised(1),
+ event(2)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The state of the event or alarm.
+ In case of alarm, 'cleard' or 'raised'.
+ In case of event, 'event'."
+ ::= { genEquipEventLogEntry 6 }
+
+genEquipEventLogProbableCause OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The probable cause that may be the reason for the event."
+ ::= { genEquipEventLogEntry 7 }
+
+genEquipEventLogCorrectiveActions OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Some possible suggested corrective actions in order to eliminate the raised alarm."
+ ::= { genEquipEventLogEntry 8 }
+
+genEquipEventLogAdditionalInfo OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Additional information that may further qualify the source of the event."
+ ::= { genEquipEventLogEntry 9 }
+
+genEquipEventLogUserText OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "An additional description of the event or fault, or any other information that user wants to attach to it."
+ ::= { genEquipEventLogEntry 10 }
+
+genEquipEventLogIfIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "If Index of the originated source."
+ ::= { genEquipEventLogEntry 11 }
+
+genEquipEventLogId OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The Id of the event."
+ ::= { genEquipEventLogEntry 12 }
+
+-- Clear event log command
+genEquipEventLogClear OBJECT-TYPE
+ SYNTAX OffOn
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The clear event log command. If enabled, will clear the event log."
+ ::= { genEquipEventLog 2 }
+
+genEquipEventLogLastChangeCounter OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "This counter is initialized with a random number after reset,
+ and incremented on each change in the EventLogTable"
+ ::= { genEquipEventLog 3 }
+
+
+-- Application last error (number and description)
+genEquipFaultErrno OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The application last error number. List of Errnos are located in the MIB Ref Guide."
+ ::= { genEquipFault 4 }
+
+genEquipFaultErrDescr OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The application last error description. List of Errnos are located in the MIB Ref Guide."
+ ::= { genEquipFault 5 }
+
+
+-- Management
+genEquipMng OBJECT IDENTIFIER ::= { genEquip 4}
+
+genEquipMngSw OBJECT IDENTIFIER ::= { genEquipMng 1}
+
+genEquipMngSwServerUrl OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+"Remote SW Update Server URL where SW updates reside"
+::= { genEquipMngSw 1 }
+
+genEquipMngSwServerLogin OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+"Remote server login"
+::= { genEquipMngSw 2 }
+
+genEquipMngSwServerPassword OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+"Remote server password"
+::= { genEquipMngSw 3 }
+
+genEquipMngSwProxyUrl OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS obsolete
+ DESCRIPTION
+"Proxy Server Url.
+ This parameter is obsolete and should not be in used."
+::= { genEquipMngSw 4 }
+
+genEquipMngSwProxyLogin OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS obsolete
+ DESCRIPTION
+"Proxy server login
+This parameter is obsolete and should not be in used."
+::= { genEquipMngSw 5 }
+
+genEquipMngSwProxyPassword OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS obsolete
+ DESCRIPTION
+"Proxy server password
+This parameter is obsolete and should not be in used."
+::= { genEquipMngSw 6 }
+
+genEquipMngSwDownloadStatus OBJECT-TYPE
+ SYNTAX ProgressStatus
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Download software status.
+ Possible values are:
+ - ready(0)
+ - inProgress(1)
+ - success(2)
+ - failure(3)"
+::= { genEquipMngSw 7 }
+
+genEquipMngSwInstallStatus OBJECT-TYPE
+ SYNTAX ProgressStatus
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Install software status.
+ Possible values are:
+ - ready(0)
+ - inProgress(1)
+ - success(2)
+ - failure(3)"
+::= { genEquipMngSw 8 }
+
+genEquipMngSwCommand OBJECT-TYPE
+ SYNTAX SwCommandTimer
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The command that is executed to manage SW versions.
+ Depending on the value given, a different operation will be carried out involving FTP and/or version installing.
+ Notice that software will be installed in all slots in a shelf and reset will be automatically carried out
+ at the end of the installation process.
+ Possible values are:
+ - noOperation(0)
+ - downloadUpgradeVersion(1) - load a newer version from FTP site
+ - upgrade(2) - upgrade to newer version which has already been loaded
+ - rollback(3) - install a previously working version without downloading
+ - downgrade(4) - downgrade to an older version which has alredy been loaded
+ - downloadDowngradeVersion(5) - load an older version from FTP site
+ - upgradeTimer(6) - Starts the timer defined in genEquipMngSwInstallationTimer
+ and upon expiration upgrades to a newer version which has already been loaded.
+ - rollbackTimer(7) - Starts the timer defined in genEquipMngSwInstallationTimer
+ and upon expiration install a previously working version without downloading
+ - downgradeTimer(7) - Starts the timer defined in genEquipMngSwInstallationTimer
+ and upon expiration downgrades to an older which has already been loaded
+ - abortTimedTnstallation(9) stops a counting timer; the installation process will not take place.
+ Notice that it does not stop an installation process once started."
+
+::= { genEquipMngSw 9 }
+
+genEquipMngSwInstalledIduVersion OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "This value indicates the Package Version of the installed IDU SW"
+::= { genEquipMngSw 10 }
+
+genEquipMngSwInstalledRfuVersion OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "This value indicates the Package version of the installed RFU SW."
+::= { genEquipMngSw 11 }
+
+-- Versions
+genEquipMngSwVersions OBJECT IDENTIFIER ::= { genEquipMngSw 13}
+
+genEquipMngSwIDUVersionsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipMngSwIDUVersionsEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table contains all IDU running versions."
+ ::= { genEquipMngSwVersions 1 }
+
+genEquipMngSwIDUVersionsEntry OBJECT-TYPE
+ SYNTAX GenEquipMngSwIDUVersionsEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Entry containing the info of the IDU Versions table."
+ INDEX { genEquipMngSwIDUVersionsCounter }
+ ::= { genEquipMngSwIDUVersionsTable 1 }
+
+GenEquipMngSwIDUVersionsEntry ::=
+ SEQUENCE {
+ genEquipMngSwIDUVersionsCounter
+ INTEGER,
+ genEquipMngSwIDUVersionsPackageName
+ DisplayString,
+ genEquipMngSwIDUVersionsTargetDevice
+ DisplayString,
+ genEquipMngSwIDUVersionsRunningVersion
+ DisplayString,
+ genEquipMngSwIDUVersionsInstalledVersion
+ DisplayString,
+ genEquipMngSwIDUVersionsUpgradePackage
+ DisplayString,
+ genEquipMngSwIDUVersionsDowngradePackage
+ DisplayString,
+ genEquipMngSwIDUVersionsResetType
+ INTEGER
+}
+
+genEquipMngSwIDUVersionsCounter OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "This is the index of this table."
+ ::= { genEquipMngSwIDUVersionsEntry 1 }
+
+genEquipMngSwIDUVersionsPackageName OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The package name"
+ ::= { genEquipMngSwIDUVersionsEntry 2 }
+
+genEquipMngSwIDUVersionsTargetDevice OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The Target device within the NE (i.e. Modem, FPGA, IDU)"
+ ::= { genEquipMngSwIDUVersionsEntry 3 }
+
+genEquipMngSwIDUVersionsRunningVersion OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The running version."
+ ::= { genEquipMngSwIDUVersionsEntry 4 }
+
+genEquipMngSwIDUVersionsInstalledVersion OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The installed version is similar to the running version, besides packages that are not currently running.
+ Those packages will have in the running version 'N/A' while in the installed version there is a version number.
+ For example, in equipment without daughter-board, some of the packages will be installed but not running."
+ ::= { genEquipMngSwIDUVersionsEntry 5 }
+
+genEquipMngSwIDUVersionsUpgradePackage OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "In case the user performs an upgrade, this version will be the running/installed version"
+ ::= { genEquipMngSwIDUVersionsEntry 6 }
+
+genEquipMngSwIDUVersionsDowngradePackage OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "In case the user performs downgrade, this version will be the running/installed version."
+ ::= { genEquipMngSwIDUVersionsEntry 7 }
+
+genEquipMngSwIDUVersionsResetType OBJECT-TYPE
+ SYNTAX INTEGER{
+ noReset(0),
+ appWarmReset(1),
+ tccColdReset(2),
+ mainBoardColdReset(3),
+ mainBoardWarmReset(4),
+ applicationRestart(5),
+ cardReset(6),
+ notApplicable(7)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Minimum level of reset required to update the software in the relevant module."
+ ::= { genEquipMngSwIDUVersionsEntry 8 }
+
+genEquipMngSwTimerTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipMngSwTimerEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table contains all IDU running versions."
+ ::= { genEquipMngSwVersions 2 }
+
+genEquipMngSwTimerEntry OBJECT-TYPE
+ SYNTAX GenEquipMngSwTimerEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Entry containing the info of the IDU Versions table."
+ INDEX { genEquipMngSwTimerSlotNumber }
+ ::= { genEquipMngSwTimerTable 1 }
+
+GenEquipMngSwTimerEntry ::=
+ SEQUENCE {
+ genEquipMngSwTimerSlotNumber
+ INTEGER,
+ genEquipMngSwTimerInstallationTimer
+ INTEGER,
+ genEquipMngSwTimerTimeToInstall
+ INTEGER,
+ genEquipMngSwTimerTimerAbort
+ INTEGER
+}
+
+genEquipMngSwTimerSlotNumber OBJECT-TYPE
+ SYNTAX INTEGER (1..6)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The slot ID of the unit for this timer; 0 is for stand-alone units."
+ ::= { genEquipMngSwTimerEntry 1 }
+
+genEquipMngSwTimerInstallationTimer OBJECT-TYPE
+ SYNTAX INTEGER (1..1440)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The timer (in minutes) for software installation operations to this unit."
+ ::= { genEquipMngSwTimerEntry 2 }
+
+genEquipMngSwTimerTimeToInstall OBJECT-TYPE
+ SYNTAX INTEGER (1..86400)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The amount of time (in seconds) from now for the unit to perform software installation.
+ Zero denotes that no operation has been requested."
+ ::= { genEquipMngSwTimerEntry 3 }
+
+genEquipMngSwTimerTimerAbort OBJECT-TYPE
+ SYNTAX INTEGER {
+ proceed(0),
+ abort (1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This parameter is used to stop the count-down to the software update action."
+ ::= { genEquipMngSwTimerEntry 4 }
+
+-- Timer scalars
+
+genEquipMngSwFTPTimer OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Time (in seconds) until file transfer is failed."
+ ::= { genEquipMngSwVersions 10 }
+
+--
+
+genEquipMngSwInstallationTimer OBJECT-TYPE
+ SYNTAX INTEGER (1..1440)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The timer (in minutes) for timed software installation operations to this unit"
+::= { genEquipMngSw 14 }
+
+genEquipMngSwTimeToInstall OBJECT-TYPE
+ SYNTAX INTEGER (1..1440)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The amount of time (in minutes) from now for the unit to perform software installation.
+ Zero denotes that no operation has been requested"
+::= { genEquipMngSw 15 }
+
+genEquipMngSwUpgradeCommonRfuVersion OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "This value indicates the Package version of the installed RFU SW."
+::= { genEquipMngSw 16 }
+
+genEquipMngSwDowngradeCommonRfuVersion OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "This value indicates the Package version of the installed RFU SW."
+::= { genEquipMngSw 17 }
+
+
+
+
+genEquipMngSwFileTransferTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipMngSwFileTransferEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table allows configuring the details of the external server where software versions should be located."
+ ::= { genEquipMngSw 18 }
+
+genEquipMngSwFileTransferEntry OBJECT-TYPE
+ SYNTAX GenEquipMngSwFileTransferEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Entry containing the info of software management file transfer."
+ INDEX { genEquipMngSwFileTransferIndex }
+ ::= { genEquipMngSwFileTransferTable 1 }
+
+GenEquipMngSwFileTransferEntry ::=
+ SEQUENCE {
+ genEquipMngSwFileTransferIndex
+ INTEGER,
+ genEquipMngSwFileTransferProtocol
+ FtpProtocolType,
+ genEquipMngSwFileTransferUserName
+ DisplayString,
+ genEquipMngSwFileTransferPassword
+ DisplayString,
+ genEquipMngSwFileTransferAddress
+ IpAddress,
+ genEquipMngSwFileTransferPath
+ DisplayString,
+ genEquipMngSwFileTransferIpv6Address
+ OCTET STRING
+}
+
+genEquipMngSwFileTransferIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The index of the table."
+ ::= { genEquipMngSwFileTransferEntry 1 }
+
+genEquipMngSwFileTransferProtocol OBJECT-TYPE
+ SYNTAX FtpProtocolType
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The protocol to use to transfer the files between the system and an external computer."
+ ::= { genEquipMngSwFileTransferEntry 2 }
+
+genEquipMngSwFileTransferUserName OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "User name for access to the configuration files location."
+ ::= { genEquipMngSwFileTransferEntry 3 }
+
+genEquipMngSwFileTransferPassword OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Password for access to the software version files location."
+ ::= { genEquipMngSwFileTransferEntry 4 }
+
+genEquipMngSwFileTransferAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "IP address of the computer where software version files are to be taken from."
+ ::= { genEquipMngSwFileTransferEntry 5 }
+
+genEquipMngSwFileTransferPath OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Location of the files in the external server."
+ ::= { genEquipMngSwFileTransferEntry 6 }
+
+genEquipMngSwFileTransferIpv6Address OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..16))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "IPv6 Server Address."
+ ::= { genEquipMngSwFileTransferEntry 7 }
+
+
+---
+---
+-- NG Sequrity Certificate
+genEquipSecurityTrafficCrypto OBJECT IDENTIFIER ::= {genEquipSecurity 10}
+
+genEquipSecurityFipsAdmin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "FIPS admin configuration parameter"
+ ::= { genEquipSecurityTrafficCrypto 1 }
+
+genEquipSecurityFipsStatus OBJECT-TYPE
+ SYNTAX DownUp
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "FIPS operational status."
+::= { genEquipSecurityTrafficCrypto 2 }
+
+-- NG Sequrity Traffic Crypto configuration table traffic-crypto-config-table
+genEquipTrafficCryptoConfigTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipTrafficCryptoConfigEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Traffic Crypto configuration table."
+ ::= { genEquipSecurityTrafficCrypto 10 }
+
+genEquipTrafficCryptoConfigEntry OBJECT-TYPE
+ SYNTAX GenEquipTrafficCryptoConfigEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Traffic Crypto configuration table entry"
+ INDEX { genEquipTrafficCryptoConfigId }
+ ::= { genEquipTrafficCryptoConfigTable 1 }
+
+GenEquipTrafficCryptoConfigEntry ::=
+ SEQUENCE {
+ genEquipTrafficCryptoConfigId
+ INTEGER,
+ genEquipTrafficCryptoConfigConfigAdmin
+ INTEGER,
+ genEquipTrafficCryptoConfigMkey
+ OCTET STRING,
+ genEquipTrafficCryptoConfigBackupMkey
+ OCTET STRING,
+ genEquipTrafficCryptoConfigMkeyPeriod
+ INTEGER,
+ genEquipTrafficCryptoConfigRandKeyGen
+ INTEGER,
+ genEquipTrafficCryptoConfigSkeyPeriod
+ INTEGER
+}
+
+genEquipTrafficCryptoConfigId OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Traffic crypto Configuration Intreface ID"
+::= { genEquipTrafficCryptoConfigEntry 1 }
+
+genEquipTrafficCryptoConfigConfigAdmin OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0),
+ aes-256(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Traffic Crypto Admin Mode."
+::= { genEquipTrafficCryptoConfigEntry 2 }
+
+genEquipTrafficCryptoConfigMkey OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Traffic Crypto Master Key."
+::= { genEquipTrafficCryptoConfigEntry 3 }
+
+genEquipTrafficCryptoConfigBackupMkey OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Traffic Crypto Backup Master Key"
+::= { genEquipTrafficCryptoConfigEntry 4 }
+
+genEquipTrafficCryptoConfigMkeyPeriod OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Master Key Expire Configuration."
+::= { genEquipTrafficCryptoConfigEntry 5 }
+
+genEquipTrafficCryptoConfigRandKeyGen OBJECT-TYPE
+ SYNTAX INTEGER {
+ random-key-generate(0),
+ random-key-clear(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Random Key generation/clear indication."
+::= { genEquipTrafficCryptoConfigEntry 6 }
+
+genEquipTrafficCryptoConfigSkeyPeriod OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Session Key Update Time Configuration."
+::= { genEquipTrafficCryptoConfigEntry 7 }
+
+
+-- NG Sequrity Traffic Crypto status table traffic-crypto-status-table
+genEquipTrafficCryptoStatusTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipTrafficCryptoStatusEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Traffic Crypto status table."
+ ::= { genEquipSecurityTrafficCrypto 11 }
+
+genEquipTrafficCryptoStatusEntry OBJECT-TYPE
+ SYNTAX GenEquipTrafficCryptoStatusEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Traffic Crypto status table Entry"
+ INDEX { genEquipTrafficCryptoStatusId }
+ ::= { genEquipTrafficCryptoStatusTable 1 }
+
+GenEquipTrafficCryptoStatusEntry ::=
+ SEQUENCE {
+ genEquipTrafficCryptoStatusId
+ INTEGER,
+ genEquipTrafficCryptoStatusValid
+ INTEGER,
+ genEquipTrafficCryptoStatusMkeyTimeExpire
+ INTEGER
+}
+
+
+genEquipTrafficCryptoStatusId OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Traffic Crypto Status Intreface ID"
+::= { genEquipTrafficCryptoStatusEntry 1 }
+
+genEquipTrafficCryptoStatusValid OBJECT-TYPE
+ SYNTAX INTEGER {
+ not-valid(0),
+ valid(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Crypto Interface Validation State."
+::= { genEquipTrafficCryptoStatusEntry 2 }
+
+genEquipTrafficCryptoStatusMkeyTimeExpire OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Number of days Mkey to expire."
+::= { genEquipTrafficCryptoStatusEntry 3 }
+
+--
+--
+
+genEquipMngSwFileTransferStatusTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipMngSwFileTransferStatusEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table shows the status of the current software version file transfer operation."
+ ::= { genEquipMngSw 19 }
+
+genEquipMngSwFileTransferStatusEntry OBJECT-TYPE
+ SYNTAX GenEquipMngSwFileTransferStatusEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Entry containing the info of software management file transfer status."
+ INDEX { genEquipMngSwFileTransferStatusIndex }
+ ::= { genEquipMngSwFileTransferStatusTable 1 }
+
+GenEquipMngSwFileTransferStatusEntry ::=
+ SEQUENCE {
+ genEquipMngSwFileTransferStatusIndex
+ INTEGER,
+ genEquipMngSwFileTransferStatusResult
+ INTEGER,
+ genEquipMngSwFileTransferPercentageDone
+ INTEGER,
+ genEquipMngSwFileTransferPercentageDoneStandBy
+ INTEGER,
+ genEquipMngSwFileTransferStatusResultStandBy
+ INTEGER
+}
+
+genEquipMngSwFileTransferStatusIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The index of the table.."
+ ::= { genEquipMngSwFileTransferStatusEntry 1 }
+
+
+genEquipMngSwFileTransferStatusResult OBJECT-TYPE
+ SYNTAX INTEGER {
+ ready(0),
+ downloadStarted(1),
+ verifyingDownloadFiles(2),
+ downloadInProgress(3),
+ downloadSuccess(4),
+ downloadFailure(5),
+ allComponentsExist(6),
+ versionIncompatibleWithSystem(7),
+ incompleteFileSet(8),
+ componentUnsupportedByHw(9),
+ corruptSwFiles(10),
+ missingDependencies(11),
+ downloadCancelled(12)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Status of the current file transfer operation."
+ ::= { genEquipMngSwFileTransferStatusEntry 2 }
+
+genEquipMngSwFileTransferPercentageDone OBJECT-TYPE
+ SYNTAX INTEGER (0..100)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "An indication of the progress of the process of the current file transfer operation."
+ ::= { genEquipMngSwFileTransferStatusEntry 3 }
+
+genEquipMngSwFileTransferPercentageDoneStandBy OBJECT-TYPE
+ SYNTAX INTEGER (0..100)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "An indication of the progress of the process of the current internal file transfer operation."
+ ::= { genEquipMngSwFileTransferStatusEntry 4 }
+
+genEquipMngSwFileTransferStatusResultStandBy OBJECT-TYPE
+ SYNTAX INTEGER {
+ ready(0),
+ download-started(1),
+ verifying-download-files(2)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Status of the current internal file transfer operation."
+ ::= { genEquipMngSwFileTransferStatusEntry 5 }
+
+
+
+genEquipMngSwInstallStatusTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipMngSwInstallStatusEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table shows the status of the current software version installation operation."
+ ::= { genEquipMngSw 20 }
+
+genEquipMngSwInstallStatusEntry OBJECT-TYPE
+ SYNTAX GenEquipMngSwInstallStatusEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Entry containing the info of software installation status."
+ INDEX { genEquipMngSwInstallStatusIndex }
+ ::= { genEquipMngSwInstallStatusTable 1 }
+
+GenEquipMngSwInstallStatusEntry ::=
+ SEQUENCE {
+ genEquipMngSwInstallStatusIndex
+ INTEGER,
+ genEquipMngSwInstallStatusResult
+ INTEGER,
+ genEquipMngSwInstallPercentageDone
+ INTEGER,
+ genEquipMngSwInstallStatusResultStandBy
+ INTEGER,
+ genEquipMngSwInstallPercentageDoneStandBy
+ INTEGER
+}
+
+genEquipMngSwInstallStatusIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The index of the table.."
+ ::= { genEquipMngSwInstallStatusEntry 1 }
+
+
+genEquipMngSwInstallStatusResult OBJECT-TYPE
+ SYNTAX INTEGER {
+ ready(0),
+ installationStarted(1),
+ verifyingInstallationFiles(2),
+ installationInProgress(3),
+ installationSuccess(4),
+ installationPartialSuccess(5),
+ installationFailure(6),
+ incompleteSwVersion(7),
+ installationCancelled(8)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Status of the current installation operation."
+ ::= { genEquipMngSwInstallStatusEntry 2 }
+
+genEquipMngSwInstallPercentageDone OBJECT-TYPE
+ SYNTAX INTEGER (0..100)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "An indication of the progress of the process of the current installation operation."
+ ::= { genEquipMngSwInstallStatusEntry 3 }
+
+genEquipMngSwInstallStatusResultStandBy OBJECT-TYPE
+ SYNTAX INTEGER {
+ ready(0),
+ installationStarted(1),
+ verifyingInstallationFiles(2),
+ installationInProgress(3),
+ installationSuccess(4),
+ installationPartialSuccess(5),
+ installationFailure(6),
+ incompleteSwVersion(7),
+ installationCancelled(8)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Status of the current file transfer operation."
+ ::= { genEquipMngSwInstallStatusEntry 4 }
+
+genEquipMngSwInstallPercentageDoneStandBy OBJECT-TYPE
+ SYNTAX INTEGER (0..100)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "An indication of the progress of the process of the current installation operation."
+ ::= { genEquipMngSwInstallStatusEntry 5 }
+
+
+--
+--
+genEquipMngSwOperationTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipMngSwOperationEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table allows downloading and installing SW versions."
+ ::= { genEquipMngSw 21 }
+
+genEquipMngSwOperationEntry OBJECT-TYPE
+ SYNTAX GenEquipMngSwOperationEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Entry containing the info of software management operation table."
+ INDEX { genEquipMngSwOperationIndex }
+ ::= { genEquipMngSwOperationTable 1 }
+
+GenEquipMngSwOperationEntry ::=
+ SEQUENCE {
+ genEquipMngSwOperationIndex
+ INTEGER,
+ genEquipMngSwOperationOperation
+ INTEGER,
+ genEquipMngSwOperationTimedInstallation
+ NoYes
+}
+
+genEquipMngSwOperationIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The index of the table.."
+ ::= { genEquipMngSwOperationEntry 1 }
+
+
+genEquipMngSwOperationOperation OBJECT-TYPE
+ SYNTAX INTEGER {
+ noAction(0),
+ download(1),
+ install(2),
+ updateBackup(3),
+ swapBootSection(4),
+ abortTimer(5)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The operation to be performed: download, install, update backup, swap boot section, abort installation timer."
+ ::= { genEquipMngSwOperationEntry 2 }
+
+genEquipMngSwOperationTimedInstallation OBJECT-TYPE
+ SYNTAX NoYes
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Whether to perform the installation after a configurable timer expires."
+ ::= { genEquipMngSwOperationEntry 3 }
+
+--
+-- Slots running versions status table - software-mgt-slot-running-versions-status
+--
+genEquipMngSwSlotRunningVersionTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipMngSwSlotRunningVersionEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table shows the versions currently running in cards installed in the system."
+ ::= { genEquipMngSw 22 }
+
+genEquipMngSwSlotRunningVersionEntry OBJECT-TYPE
+ SYNTAX GenEquipMngSwSlotRunningVersionEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table entry shows the versions currently running in cards installed in the system."
+ INDEX { genEquipMngSwSlotRunningVersionSlotId }
+ ::= { genEquipMngSwSlotRunningVersionTable 1 }
+
+GenEquipMngSwSlotRunningVersionEntry ::=
+ SEQUENCE {
+ genEquipMngSwSlotRunningVersionSlotId
+ INTEGER,
+ genEquipMngSwSlotRunningVersionCardType
+ InventoryCardType,
+ genEquipMngSwSlotRunningVersionComponent
+ DisplayString,
+ genEquipMngSwSlotRunningVersionActualVersion
+ DisplayString
+}
+
+genEquipMngSwSlotRunningVersionSlotId OBJECT-TYPE
+ SYNTAX INTEGER (1..12)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The index of the table.."
+ ::= { genEquipMngSwSlotRunningVersionEntry 1 }
+
+
+genEquipMngSwSlotRunningVersionCardType OBJECT-TYPE
+ SYNTAX InventoryCardType
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Type of card inserted in slot."
+ ::= { genEquipMngSwSlotRunningVersionEntry 2 }
+
+genEquipMngSwSlotRunningVersionComponent OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Name of SW functional component."
+ ::= { genEquipMngSwSlotRunningVersionEntry 3 }
+
+genEquipMngSwSlotRunningVersionActualVersion OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Version of running SW."
+ ::= { genEquipMngSwSlotRunningVersionEntry 4 }
+
+
+--
+-- Standby Unit software versions table - software-mgt-table-current-versions-status-standby
+--
+genEquipMngSwIDUVersionsStandByTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipMngSwIDUVersionsStandByEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table shows the software versions residing in the standby unit."
+ ::= { genEquipMngSw 23 }
+
+genEquipMngSwIDUVersionsStandByEntry OBJECT-TYPE
+ SYNTAX GenEquipMngSwIDUVersionsStandByEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table entry shows the software versions residing in the standby unit."
+ INDEX { genEquipMngSwIDUVersionsStandByIndex }
+ ::= { genEquipMngSwIDUVersionsStandByTable 1 }
+
+GenEquipMngSwIDUVersionsStandByEntry ::=
+ SEQUENCE {
+ genEquipMngSwIDUVersionsStandByIndex
+ INTEGER,
+ genEquipMngSwIDUVersionsStandByPackageName
+ DisplayString,
+ genEquipMngSwIDUVersionsStandByRunningVersion
+ DisplayString,
+ genEquipMngSwIDUVersionsStandByInstalledVersion
+ DisplayString,
+ genEquipMngSwIDUVersionsStandByTargetDevice
+ InventoryCardType,
+ genEquipMngSwIDUVersionsStandByDownloadedPackage
+ DisplayString,
+ genEquipMngSwIDUVersionsStandByResetType
+ VmResetType
+}
+
+genEquipMngSwIDUVersionsStandByIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "mate rpm index."
+ ::= { genEquipMngSwIDUVersionsStandByEntry 1 }
+
+
+genEquipMngSwIDUVersionsStandByPackageName OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Name of the module which the software package belongs to."
+ ::= { genEquipMngSwIDUVersionsStandByEntry 2 }
+
+genEquipMngSwIDUVersionsStandByRunningVersion OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Version currently running."
+ ::= { genEquipMngSwIDUVersionsStandByEntry 3 }
+
+genEquipMngSwIDUVersionsStandByInstalledVersion OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Currently installed version; upon the appropriate reset this will become the running version."
+ ::= { genEquipMngSwIDUVersionsStandByEntry 4 }
+
+genEquipMngSwIDUVersionsStandByTargetDevice OBJECT-TYPE
+ SYNTAX InventoryCardType
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The HW board in which the SW module from the mate is running."
+ ::= { genEquipMngSwIDUVersionsStandByEntry 5 }
+
+genEquipMngSwIDUVersionsStandByDownloadedPackage OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Version that was downloaded from server upon installation, it will become the installed version."
+ ::= { genEquipMngSwIDUVersionsStandByEntry 6 }
+
+genEquipMngSwIDUVersionsStandByResetType OBJECT-TYPE
+ SYNTAX VmResetType
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Minimum level of reset required to update the software in the relevant module."
+ ::= { genEquipMngSwIDUVersionsStandByEntry 7 }
+
+--
+-- WatchDog Scalar
+genEquipMngSwWatchdogAdmin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Enables/Disables the watchdog timer for the application."
+ ::= { genEquipMngSw 35 }
+
+
+-- Management configuration
+genEquipMngCfg OBJECT IDENTIFIER ::= { genEquipMng 2}
+
+genEquipMngCfgBackupStatus OBJECT-TYPE
+ SYNTAX ProgressStatus
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "This parameter shows the current state of the configuration backup files creation in the IDU.
+ Possible values are:
+ - ready(0)
+ - inProgress(1)
+ - success(2)
+ - failure(3)"
+::= { genEquipMngCfg 1 }
+
+genEquipMngCfgRestoreStatus OBJECT-TYPE
+ SYNTAX ProgressStatus
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "This parameter shows the current state of configuration restoring from downloaded backup files.
+ Possible values are:
+ - ready(0)
+ - inProgress(1)
+ - success(2)
+ - failure(3)"
+::= { genEquipMngCfg 2 }
+
+genEquipMngCfgUploadStatus OBJECT-TYPE
+ SYNTAX ProgressStatus
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "This parameter shows the current state of configuration backup files transfer from IDU to external FTP site.
+ Possible values are:
+ - ready(0)
+ - inProgress(1)
+ - success(2)
+ - failure(3)"
+::= { genEquipMngCfg 3 }
+
+
+genEquipMngCfgDownloadStatus OBJECT-TYPE
+ SYNTAX ProgressStatus
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "This parameter shows the current state of configuration backup files transfer from external FTP site to IDU.
+ Possible values are:
+ - ready(0)
+ - inProgress(1)
+ - success(2)
+ - failure(3)"
+::= { genEquipMngCfg 4 }
+
+genEquipMngCfgCommand OBJECT-TYPE
+ SYNTAX INTEGER{
+ no-operation(0),
+ backup(1),
+ restore(2),
+ upload(3),
+ download(4)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The command to be executed to backup/restore or upload/download configuration.
+ If there is more then 1 slot in the NE, it is done for all the shelf."
+::= { genEquipMngCfg 5 }
+
+genEquipMngCfgEthernetSwitchStoreConfiguration OBJECT-TYPE
+ SYNTAX OffOn
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This parameter writes the current configuration in the database.
+ This command should be called after any change to the following sections:
+ - Bridge configuration
+ - WaySide configuration
+ - Protection configuration."
+::= { genEquipMngCfg 6 }
+
+genEquipMngCfgSetToDefaultKeepIp OBJECT-TYPE
+ SYNTAX OffOn
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Set to Default configuration without changing the network parameters such as IP address, and subnet mask."
+::= { genEquipMngCfg 7 }
+
+genEquipMngCfgCliScriptFileName OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The CLI script file name to be downloaded to the NE."
+::= { genEquipMngCfg 8 }
+
+--
+-- Managment Configuration
+--
+genEquipMngCfgGeneric OBJECT IDENTIFIER ::= { genEquipMngCfg 10}
+
+genEquipMngCfgBackupProgress OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "An indication of the progress of the backup operation process."
+::= { genEquipMngCfgGeneric 1 }
+
+genEquipMngCfgTimeToInstallation OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "A counter indicating the time left until installation begins."
+::= { genEquipMngCfgGeneric 2 }
+
+
+--
+-- Configuration management file transfer - configuration-table-file-transfer-config
+--
+genEquipMngCfgFileTransferTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipMngCfgFileTransferEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table allows configuring the details of the external server where configuration should be located."
+ ::= { genEquipMngCfg 11 }
+
+genEquipMngCfgFileTransferEntry OBJECT-TYPE
+ SYNTAX GenEquipMngCfgFileTransferEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table entry allows configuring the details of the external server where configuration should be located."
+ INDEX { genEquipMngCfgFileTransferIndex }
+ ::= { genEquipMngCfgFileTransferTable 1 }
+
+GenEquipMngCfgFileTransferEntry ::=
+ SEQUENCE {
+ genEquipMngCfgFileTransferIndex
+ INTEGER,
+ genEquipMngCfgFileTransferProtocol
+ FtpProtocolType,
+ genEquipMngCfgFileTransferUserName
+ DisplayString,
+ genEquipMngCfgFileTransferPassword
+ DisplayString,
+ genEquipMngCfgFileTransferAddress
+ IpAddress,
+ genEquipMngCfgFileTransferPath
+ DisplayString,
+ genEquipMngCfgFileTransferFileName
+ DisplayString,
+ genEquipMngCfgFileTransferIpv6Address
+ OCTET STRING
+}
+
+genEquipMngCfgFileTransferIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Index of the table."
+::= { genEquipMngCfgFileTransferEntry 1 }
+
+genEquipMngCfgFileTransferProtocol OBJECT-TYPE
+ SYNTAX FtpProtocolType
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The protocol to use to transfer the files between the system and an external computer."
+::= { genEquipMngCfgFileTransferEntry 2 }
+
+genEquipMngCfgFileTransferUserName OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "User name for access to the configuration files location."
+::= { genEquipMngCfgFileTransferEntry 3 }
+
+genEquipMngCfgFileTransferPassword OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Password for access to the configuration files location."
+::= { genEquipMngCfgFileTransferEntry 4 }
+
+genEquipMngCfgFileTransferAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "IP address of the computer where configuration files are to be transferred to/from."
+::= { genEquipMngCfgFileTransferEntry 5 }
+
+genEquipMngCfgFileTransferPath OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Location of the files in the external server."
+::= { genEquipMngCfgFileTransferEntry 6 }
+
+genEquipMngCfgFileTransferFileName OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Name of the file in server."
+::= { genEquipMngCfgFileTransferEntry 7 }
+
+genEquipMngCfgFileTransferIpv6Address OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..16))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "IPv6 Server's address where files will be transferred to/from."
+::= { genEquipMngCfgFileTransferEntry 8 }
+
+
+--
+-- Configuration management file transfer status - configuration-table-file-transfer-status
+--
+genEquipMngCfgFileTransferStatusTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipMngCfgFileTransferStatusEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table shows the status of the current configuration file transfer operation."
+ ::= { genEquipMngCfg 12 }
+
+genEquipMngCfgFileTransferStatusEntry OBJECT-TYPE
+ SYNTAX GenEquipMngCfgFileTransferStatusEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table entry shows the status of the current configuration file transfer operation."
+ INDEX { genEquipMngCfgFileTransferStatusIndex }
+ ::= { genEquipMngCfgFileTransferStatusTable 1 }
+
+GenEquipMngCfgFileTransferStatusEntry ::=
+ SEQUENCE {
+ genEquipMngCfgFileTransferStatusIndex
+ INTEGER,
+ genEquipMngCfgFileTransferStatusPercentageDone
+ INTEGER,
+ genEquipMngCfgFileTransferStatusResult
+ FileTransferStatus
+}
+
+genEquipMngCfgFileTransferStatusIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Index of the table."
+::= { genEquipMngCfgFileTransferStatusEntry 1 }
+
+genEquipMngCfgFileTransferStatusPercentageDone OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "An indication of the progress of the process of the current file transfer operation."
+::= { genEquipMngCfgFileTransferStatusEntry 2 }
+
+genEquipMngCfgFileTransferStatusResult OBJECT-TYPE
+ SYNTAX FileTransferStatus
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Status of the current file transfer operation."
+::= { genEquipMngCfgFileTransferStatusEntry 3 }
+
+--
+-- Configuration management operation table - configuration-table-operation-config
+--
+genEquipMngCfgOperationTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipMngCfgOperationEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table allows creating, restoring, transferring and deleting configuration files."
+ ::= { genEquipMngCfg 13 }
+
+genEquipMngCfgOperationEntry OBJECT-TYPE
+ SYNTAX GenEquipMngCfgOperationEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table entry allows creating, restoring, transferring and deleting configuration files."
+ INDEX { genEquipMngCfgOperationIndex }
+ ::= { genEquipMngCfgOperationTable 1 }
+
+GenEquipMngCfgOperationEntry ::=
+ SEQUENCE {
+ genEquipMngCfgOperationIndex
+ INTEGER,
+ genEquipMngCfgOperationOperation
+ CfgOper,
+ genEquipMngCfgOperationFileNumber
+ INTEGER,
+ genEquipMngCfgOperationTimedInstallation
+ NoYes,
+ genEquipMngCfgOperationTimer
+ DisplayString,
+ genEquipMngCfgOperationSlotNumber
+ INTEGER
+}
+
+genEquipMngCfgOperationIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Index of the table."
+::= { genEquipMngCfgOperationEntry 1 }
+
+genEquipMngCfgOperationOperation OBJECT-TYPE
+ SYNTAX CfgOper
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The operation to be performed: backup, restore, delete, import, export."
+::= { genEquipMngCfgOperationEntry 2 }
+
+genEquipMngCfgOperationFileNumber OBJECT-TYPE
+ SYNTAX INTEGER (1..3)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "A number from 1 to 3 to identify different restoration files."
+::= { genEquipMngCfgOperationEntry 3 }
+
+genEquipMngCfgOperationTimedInstallation OBJECT-TYPE
+ SYNTAX NoYes
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Whether to install immediately or following a countdown from a defined counter."
+::= { genEquipMngCfgOperationEntry 4 }
+
+genEquipMngCfgOperationTimer OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "A timer which determines the time to installation."
+::= { genEquipMngCfgOperationEntry 5 }
+
+genEquipMngCfgOperationSlotNumber OBJECT-TYPE
+ SYNTAX INTEGER (0..12)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Slot number."
+::= { genEquipMngCfgOperationEntry 6 }
+
+
+--
+-- Configuration management status table - configuration-table-backup-files-status
+--
+genEquipMngCfgConfigurationFilesTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipMngCfgConfigurationFilesEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table shows the status of the current configuration management operation."
+ ::= { genEquipMngCfg 14 }
+
+genEquipMngCfgConfigurationFilesEntry OBJECT-TYPE
+ SYNTAX GenEquipMngCfgConfigurationFilesEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table entry shows the status of the current configuration file transfer operation."
+ INDEX { genEquipMngCfgConfigurationFilesIndex }
+ ::= { genEquipMngCfgConfigurationFilesTable 1 }
+
+GenEquipMngCfgConfigurationFilesEntry ::=
+ SEQUENCE {
+ genEquipMngCfgConfigurationFilesIndex
+ INTEGER,
+ genEquipMngCfgConfigurationFilesFileNumber
+ INTEGER,
+ genEquipMngCfgConfigurationFilesSystemType
+ DisplayString,
+ genEquipMngCfgConfigurationFilesSWVersion
+ DisplayString,
+ genEquipMngCfgConfigurationFilesTimeDate
+ INTEGER,
+ genEquipMngCfgConfigurationFilesSystemIP
+ IpAddress,
+ genEquipMngCfgConfigurationFilesCardsConfigured
+ DisplayString,
+ genEquipMngCfgConfigurationFilesSystemID
+ DisplayString
+}
+
+genEquipMngCfgConfigurationFilesIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Index of the table."
+::= { genEquipMngCfgConfigurationFilesEntry 1 }
+
+genEquipMngCfgConfigurationFilesFileNumber OBJECT-TYPE
+ SYNTAX INTEGER (1..3)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "A number from 1 to 3 to identify different restoration files."
+::= { genEquipMngCfgConfigurationFilesEntry 2 }
+
+genEquipMngCfgConfigurationFilesSystemType OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Type of product from which the backup file was created."
+::= { genEquipMngCfgConfigurationFilesEntry 3 }
+
+genEquipMngCfgConfigurationFilesSWVersion OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Software version of the system from which the backup file was created."
+::= { genEquipMngCfgConfigurationFilesEntry 4 }
+
+genEquipMngCfgConfigurationFilesTimeDate OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Time and date of creation of the file."
+::= { genEquipMngCfgConfigurationFilesEntry 5 }
+
+genEquipMngCfgConfigurationFilesSystemIP OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "IP address of the unit from which the backup file was created."
+::= { genEquipMngCfgConfigurationFilesEntry 6 }
+
+genEquipMngCfgConfigurationFilesCardsConfigured OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Types of cards for which configuration values exist in the file; when restoring other card types will get default values."
+::= { genEquipMngCfgConfigurationFilesEntry 7 }
+
+genEquipMngCfgConfigurationFilesSystemID OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "System ID of the unit from which the backup file was created."
+::= { genEquipMngCfgConfigurationFilesEntry 8 }
+
+--
+--
+genEquipMngCfgFileRestoreStatus OBJECT-TYPE
+ SYNTAX FileRestoreStatus
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Status of the operation of configuration restore from restore point."
+::= { genEquipMngCfg 20 }
+
+genEquipMngCfgFileTransferStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ ready(0),
+ download-started(1),
+ verifying-download-files(2),
+ download-in-progress(3),
+ download-success(4),
+ download-failure(5),
+ all-components-exist(6),
+ version-incompatible-with-system(7),
+ incomplete-file-set(8),
+ component-unsupported-by-hw(9),
+ corrupt-sw-files(10),
+ missing-dependencies(11),
+ download-cancelled(12)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Status of the operation of configuration restore from restore point."
+::= { genEquipMngCfg 21 }
+
+
+
+
+-- Management File Transfer
+genEquipMngFileTransfer OBJECT IDENTIFIER ::= { genEquipMng 3}
+
+genEquipMngFileTransferFileTypeOper OBJECT-TYPE
+ SYNTAX INTEGER {
+ no-operation(0),
+ download-configuration(1),
+ download-certificate(2),
+ download-warning-banner(3),
+ download-cli-script(4),
+ upload-configuration(5),
+ upload-csr-file(6),
+ upload-unit-info(7)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Operation for the file type to be transferred between the IDU and the external server.
+ The options with prefix 'download' are files to be transferred from the server to the IDU.
+ The options with prefix 'upload' are files to be transferred from the IDU to the server.
+ To download IDU certificate, the OIDs genEquipSecurityCfgSecurityFileName, genEquipSecurityCfgSecurityFileFormat
+ and genEquipSecurityCfgSecurityFileType should be set prior the operation of download security file.
+ To upload CSR file, the OID genEquipSecurityCfgSecurityFileName should be set prior the operation of upload CSR file.
+ To download CLI string, the OID genEquipMngCfgCliScriptFileName should be set prior the operation of download cli-script.
+ To download warning banner file, the OID genEquipSecurityCfgWarningBannerFName should be set prior the operation of download warning-banner."
+::= { genEquipMngFileTransfer 1 }
+
+genEquipMngFileTransferDownloadConfigStatus OBJECT-TYPE
+ SYNTAX ProgressStatus
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The operation status of download configuration, which is performed using genEquipMngFileTransferFileTypeOper"
+::= { genEquipMngFileTransfer 2 }
+
+genEquipMngFileTransferDownloadCertificateStatus OBJECT-TYPE
+ SYNTAX ProgressStatus
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The operation status of download configuration, which is performed using genEquipMngFileTransferFileTypeOper"
+::= { genEquipMngFileTransfer 3 }
+
+genEquipMngFileTransferDownloadWarningBannerStatus OBJECT-TYPE
+ SYNTAX ProgressStatus
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The operation status of download warning banner, which is performed using genEquipMngFileTransferFileTypeOper"
+::= { genEquipMngFileTransfer 4 }
+
+genEquipMngFileTransferDownloadCliScriptStatus OBJECT-TYPE
+ SYNTAX ProgressStatus
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "TThe operation status of download cli script, which is performed using genEquipMngFileTransferFileTypeOper"
+::= { genEquipMngFileTransfer 5 }
+
+genEquipMngFileTransferUploadConfigStatus OBJECT-TYPE
+ SYNTAX ProgressStatus
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The operation status of upload configuration, which is performed using genEquipMngFileTransferFileTypeOper"
+::= { genEquipMngFileTransfer 6 }
+
+genEquipMngFileTransferUploadCSRStatus OBJECT-TYPE
+ SYNTAX ProgressStatus
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The operation status of upload CSR, which is performed using genEquipMngFileTransferFileTypeOper"
+::= { genEquipMngFileTransfer 7 }
+
+genEquipMngFileTransferUploadUnitInfoStatus OBJECT-TYPE
+ SYNTAX ProgressStatus
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The operation status of upload unit info, which is performed using genEquipMngFileTransferFileTypeOper"
+::= { genEquipMngFileTransfer 8 }
+
+
+-- Management Unit Information Group
+genEquipMngUnitInfo OBJECT IDENTIFIER ::= { genEquipMng 4}
+genEquipMngUnitInfoGeneric OBJECT IDENTIFIER ::= { genEquipMngUnitInfo 1}
+
+genEquipMngUnitInfoOperation OBJECT-TYPE
+ SYNTAX CfgUnitInfoOper
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Allows creating and exporting the unit information file."
+::= { genEquipMngUnitInfoGeneric 1 }
+
+genEquipMngUnitInfoProgress OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Progress in percentage of the operation of the unit info file creation."
+::= { genEquipMngUnitInfoGeneric 2 }
+
+genEquipMngUnitInfoStatus OBJECT-TYPE
+ SYNTAX ProgressStatus
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Status of the operation of the unit info file creation."
+::= { genEquipMngUnitInfoGeneric 3 }
+
+
+-- CLI Group
+genEquipMngCli OBJECT IDENTIFIER ::= { genEquipMng 5}
+
+genEquipMngCliScriptOperation OBJECT-TYPE
+ SYNTAX INTEGER {
+ no-operation(0),
+ import(1),
+ delete(2),
+ show(3),
+ execute(4)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Allows importing, showing, deleting and executing CLI scripts."
+::= { genEquipMngCli 1 }
+
+genEquipMngCliScriptOperationStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ ready(0),
+ executing(1),
+ failed(2),
+ success(3)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Allows importing, showing, deleting and executing CLI scripts."
+::= { genEquipMngCli 2 }
+
+
+--
+-- unit-info file transfer configuration table - unit-info-files-transfer-table-config
+--
+genEquipMngUnitInfoFileTransferTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipMngUnitInfoFileTransferEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table allows configuring the details of the external server which the unit info file will be expoted to."
+ ::= { genEquipMngUnitInfo 2 }
+
+genEquipMngUnitInfoFileTransferEntry OBJECT-TYPE
+ SYNTAX GenEquipMngUnitInfoFileTransferEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table entry allows configuring the details of the external server which the unit info file will be expoted to."
+ INDEX { genEquipMngUnitInfoFileTransferIndex }
+ ::= { genEquipMngUnitInfoFileTransferTable 1 }
+
+GenEquipMngUnitInfoFileTransferEntry ::=
+ SEQUENCE {
+ genEquipMngUnitInfoFileTransferIndex
+ INTEGER,
+ genEquipMngUnitInfoFileTransferProtocol
+ FtpProtocolType,
+ genEquipMngUnitInfoFileTransferUserName
+ DisplayString,
+ genEquipMngUnitInfoFileTransferPassword
+ DisplayString,
+ genEquipMngUnitInfoFileTransferAddress
+ IpAddress,
+ genEquipMngUnitInfoFileTransferPath
+ DisplayString,
+ genEquipMngUnitInfoFileTransferFileName
+ DisplayString,
+ genEquipMngUnitInfoFileTransferIpv6Address
+ OCTET STRING
+}
+
+genEquipMngUnitInfoFileTransferIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Index of the table."
+::= { genEquipMngUnitInfoFileTransferEntry 1 }
+
+genEquipMngUnitInfoFileTransferProtocol OBJECT-TYPE
+ SYNTAX FtpProtocolType
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The protocol to use to transfer the files between the system and an external computer."
+::= { genEquipMngUnitInfoFileTransferEntry 2 }
+
+genEquipMngUnitInfoFileTransferUserName OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "User name for access to the files location."
+::= { genEquipMngUnitInfoFileTransferEntry 3 }
+
+genEquipMngUnitInfoFileTransferPassword OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Password for access to the files location."
+::= { genEquipMngUnitInfoFileTransferEntry 4 }
+
+genEquipMngUnitInfoFileTransferAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "IP address of the computer where the files are to be transferred to/from."
+::= { genEquipMngUnitInfoFileTransferEntry 5 }
+
+genEquipMngUnitInfoFileTransferPath OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Desired location of the unit info file in external server."
+::= { genEquipMngUnitInfoFileTransferEntry 6 }
+
+genEquipMngUnitInfoFileTransferFileName OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Name of the file in server."
+::= { genEquipMngUnitInfoFileTransferEntry 7 }
+
+genEquipMngUnitInfoFileTransferIpv6Address OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..16))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "IPv6 Server's Address to which he file will be transferred."
+::= { genEquipMngUnitInfoFileTransferEntry 8 }
+
+--
+-- unit-info file transfer status table - unit-info-file-transfer-table-status
+--
+genEquipMngUnitInfoFileTransferStatusTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipMngUnitInfoFileTransferStatusEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table shows the status of the current configuration file transfer operation."
+ ::= { genEquipMngUnitInfo 3 }
+
+genEquipMngUnitInfoFileTransferStatusEntry OBJECT-TYPE
+ SYNTAX GenEquipMngUnitInfoFileTransferStatusEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table entry shows the status of the current configuration file transfer operation."
+ INDEX { genEquipMngUnitInfoFileTransferStatusIndex }
+ ::= { genEquipMngUnitInfoFileTransferStatusTable 1 }
+
+GenEquipMngUnitInfoFileTransferStatusEntry ::=
+ SEQUENCE {
+ genEquipMngUnitInfoFileTransferStatusIndex
+ INTEGER,
+ genEquipMngUnitInfoFileTransferStatusPercentageDone
+ INTEGER,
+ genEquipMngUnitInfoFileTransferStatusResult
+ ProgressStatus
+}
+
+genEquipMngUnitInfoFileTransferStatusIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Index of the table."
+::= { genEquipMngUnitInfoFileTransferStatusEntry 1 }
+
+genEquipMngUnitInfoFileTransferStatusPercentageDone OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "An indication of the progress of the process of the current file transfer operation."
+::= { genEquipMngUnitInfoFileTransferStatusEntry 2 }
+
+genEquipMngUnitInfoFileTransferStatusResult OBJECT-TYPE
+ SYNTAX ProgressStatus
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Status of the current file transfer operation."
+::= { genEquipMngUnitInfoFileTransferStatusEntry 3 }
+
+
+
+-- Diagnostics and Maintenance
+genEquipDiagAndMaintenance OBJECT IDENTIFIER ::= {genEquip 10}
+
+-- Radio Loopback
+
+genEquipDiagAndMaintenanceRadioLoopbackTimeout OBJECT-TYPE
+ SYNTAX INTEGER (0..1440)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Radio loopback timeout, in minutes. 0 means no timer."
+::= { genEquipDiagAndMaintenance 1 }
+
+
+-- Line Loopback
+
+genEquipDiagAndMaintenanceLineLoopbackTimeout OBJECT-TYPE
+ SYNTAX INTEGER (0..1440)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Line loopback timeout, in minutes. 0 means no timer."
+::= { genEquipDiagAndMaintenance 2 }
+
+-- STM-1/OC-3
+
+genEquipDiagAndMaintenanceSDHLoopbackTimeout OBJECT-TYPE
+ SYNTAX INTEGER (0..1440)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "STM-1/OC-3 line loopback timeout, in minutes. 0 means no timer."
+::= { genEquipDiagAndMaintenance 3 }
+
+
+
+
+-- Security Configuration
+genEquipSecurity OBJECT IDENTIFIER ::= {genEquip 11}
+
+-- Security Configuration
+genEquipSecurityConfiguration OBJECT IDENTIFIER ::= {genEquipSecurity 1}
+
+genEquipSecurityCfgUploadPublicKeyStatus OBJECT-TYPE
+ SYNTAX ProgressStatus
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The upload status of the Public key."
+::= { genEquipSecurityConfiguration 1 }
+
+genEquipSecurityCfgDownloadSecurityStatus OBJECT-TYPE
+ SYNTAX ProgressStatus
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The download status of the digital certificate."
+::= { genEquipSecurityConfiguration 2 }
+
+genEquipSecurityCfgSecurityFileName OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The certificate file name to be downloaded."
+::= { genEquipSecurityConfiguration 3 }
+
+genEquipSecurityCfgSecurityFileType OBJECT-TYPE
+ SYNTAX INTEGER {
+ target-certificate(0),
+ target-ca-certificate(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The digital certificate file type."
+::= { genEquipSecurityConfiguration 4 }
+
+genEquipSecurityCfgSecurityFileFormat OBJECT-TYPE
+ SYNTAX INTEGER {
+ pem(0),
+ der(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The certificate file format.
+ .pem - (Privacy Enhanced Mail) Base64 encoded DER certificate,
+ enclosed between -----BEGIN CERTIFICATE----- and -----END CERTIFICATE-----
+
+ .der is a subset of Basic Encoding Rules (BER) providing for exactly one way to encode an ASN.1 value."
+::= { genEquipSecurityConfiguration 5 }
+
+genEquipSecurityCfgSecurityWebCertificateAdmin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The admin state of the certificate."
+::= { genEquipSecurityConfiguration 6 }
+
+genEquipSecurityCfgWebProtocol OBJECT-TYPE
+ SYNTAX INTEGER {
+ http(1),
+ https(2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Use unsecure http or secure https."
+::= { genEquipSecurityConfiguration 7 }
+
+genEquipSecurityCfgTelnetAdmin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Enable or disable the Telnet server on the NE."
+::= { genEquipSecurityConfiguration 8 }
+
+genEquipSecurityCfgAutoLogOutPeriod OBJECT-TYPE
+ SYNTAX INTEGER (1..60)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Auto logout period for CLI or web users, (1-60 seconds)"
+::= { genEquipSecurityConfiguration 9 }
+
+genEquipSecurityXFTP OBJECT IDENTIFIER ::= {genEquipSecurityConfiguration 10}
+
+genEquipSecurityXFTPHostIP OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The FTP/SFTP host IP address."
+::= { genEquipSecurityXFTP 1 }
+
+genEquipSecurityXFTPHostPath OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The FTP/SFTP host directory path."
+::= { genEquipSecurityXFTP 2 }
+
+genEquipSecurityXFTPProtocol OBJECT-TYPE
+ SYNTAX INTEGER {
+ ftp(0),
+ sftp(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Either FTP or SFTP to be used."
+::= { genEquipSecurityXFTP 3 }
+
+genEquipSecurityXFTPUserName OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "FTP User name."
+::= { genEquipSecurityXFTP 4 }
+
+genEquipSecurityXFTPPassword OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "FTP User password."
+::= { genEquipSecurityXFTP 5 }
+
+genEquipSecurityCfgPassFirstLoginChange OBJECT-TYPE
+ SYNTAX NoYes
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Define whether user's first login will be required to change it password or not"
+::= { genEquipSecurityConfiguration 11 }
+
+genEquipSecurityCfgCSRCreation OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..512))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This command create CSR file of the element.
+ The file could be uploaded to external server by using the genEquipMngFileTransferFileTypeOper OID.
+ The command syntax should be:
+ <country_name> <state> <locality_name> <organization_name> <organization_unit_name> <common_name> <email_addr>.
+ All the fields must be referred, for skipping on any field, use 'symbol instead'."
+::= { genEquipSecurityConfiguration 12 }
+
+genEquipSecurityCfgWarningBannerFName OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The Warning Banner file name to be downloaded to the NE."
+::= { genEquipSecurityConfiguration 13 }
+
+genEquipSecurityConfigurationRadius OBJECT IDENTIFIER ::= {genEquipSecurityConfiguration 14}
+
+genEquipSecurityConfigurationRadiusAdmin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "this parameter configures the admin state of the RADIUS protocol; when enabled, all users will be logged in via RADIUS server"
+::= { genEquipSecurityConfigurationRadius 1 }
+
+genEquipSecurityConfigurationRadiusServerIP OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "this parameter configures the IP address of the RADIUS server"
+::= { genEquipSecurityConfigurationRadius 2 }
+
+genEquipSecurityConfigurationRadiusSecret OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "this parameter configures the common secret between the agent and the RADIUS server"
+::= { genEquipSecurityConfigurationRadius 3 }
+
+genEquipSecurityConfigurationRadiusPort OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "this parameter configures the IP address of UDP port used for the RADIUS protocol"
+::= { genEquipSecurityConfigurationRadius 4 }
+
+genEquipSecurityConfigurationRadiusRetries OBJECT-TYPE
+ SYNTAX INTEGER (1..10)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "this parameter configures the number of times the agent will retry to communicate with the RADIUS server before declaring the server to be unreacheable"
+::= { genEquipSecurityConfigurationRadius 5 }
+
+genEquipSecurityConfigurationRadiusTimeout OBJECT-TYPE
+ SYNTAX INTEGER (3..30)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "this parameter configures the number of times the agent will retry to communicate with the RADIUS server before declaring the server to be unreacheable"
+::= { genEquipSecurityConfigurationRadius 6 }
+
+
+-- Users and Groups
+genEquipSecurityUsersAndGroups OBJECT IDENTIFIER ::= {genEquipSecurity 2}
+
+genEquipSecurityUsersTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipSecurityUsersEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "User table."
+ ::= { genEquipSecurityUsersAndGroups 1 }
+
+genEquipSecurityUsersEntry OBJECT-TYPE
+ SYNTAX GenEquipSecurityUsersEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "User table."
+ INDEX { genEquipSecurityUsersName }
+ ::= { genEquipSecurityUsersTable 1 }
+
+GenEquipSecurityUsersEntry ::=
+ SEQUENCE {
+ genEquipSecurityUsersName
+ DisplayString,
+ genEquipSecurityUsersPasswd
+ DisplayString,
+ genEquipSecurityUsersPriviledge
+ INTEGER,
+ genEquipSecurityUsersPasswdAging
+ INTEGER,
+ genEquipSecurityUsersExprDate
+ INTEGER,
+ genEquipSecurityUsersLastLogin
+ INTEGER,
+ genEquipSecurityUsersRowStatus
+ RowStatus
+}
+
+genEquipSecurityUsersName OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This value is the user name."
+::= { genEquipSecurityUsersEntry 1 }
+
+genEquipSecurityUsersPasswd OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This value is the user's password. It is used only in the creation phase. To change the password,
+ you need to use the genEquipSecurityUsersAndGroupsChangePasswd command"
+::= { genEquipSecurityUsersEntry 2 }
+
+genEquipSecurityUsersPriviledge OBJECT-TYPE
+ SYNTAX INTEGER {
+ no-privilege-lvl(-1),
+ viewer-user-lvl(0),
+ operator-user-lvl(1),
+ admin-user-lvl(2),
+ tech-user-lvl(3)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This value is the users privilege."
+::= { genEquipSecurityUsersEntry 3 }
+
+genEquipSecurityUsersPasswdAging OBJECT-TYPE
+ SYNTAX INTEGER (0..90)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This value is the user's password aging time (in days). When response is 99999 the meaning is No Aging."
+::= { genEquipSecurityUsersEntry 4 }
+
+genEquipSecurityUsersExprDate OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This value is the user's password expiration date.
+ The value is presented in time_t format. When response is -1 the meaning is Never Expired."
+::= { genEquipSecurityUsersEntry 5 }
+
+genEquipSecurityUsersLastLogin OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "This value is the user last login date. Time in seconds since January 1, 1970 00:00 UTC."
+::= { genEquipSecurityUsersEntry 6 }
+
+genEquipSecurityUsersRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This value is the status of the entry."
+::= { genEquipSecurityUsersEntry 30 }
+
+-- User password chnage as a single command
+genEquipSecurityUsersAndGroupsChangePasswd OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This command changes the user password at the command line. It takes all arguments as the command.
+ It cannot be done through the table since it needs to provide the old password as well.
+ The format is: '<username> <old-password> <new-password>' seperated with spaces."
+::= { genEquipSecurityUsersAndGroups 2 }
+
+-- SNMP Security params
+genEquipSecuritySNMP OBJECT IDENTIFIER ::= {genEquipSecurity 3}
+
+genEquipSecuritySNMPReadCommunity OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This is the SNMP Read community string"
+::= { genEquipSecuritySNMP 1 }
+
+genEquipSecuritySNMPWriteCommunity OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This is the SNMP Write community string"
+::= { genEquipSecuritySNMP 2 }
+
+-- SNMP Security V3 Authentication table
+genEquipSecuritySNMPV3 OBJECT IDENTIFIER ::= {genEquipSecuritySNMP 10}
+-- SNMP V3 Authentication table
+genEquipSecuritySNMPV3AuthTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipSecuritySNMPV3AuthEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Security General File Transfer Configuration Table."
+ ::= { genEquipSecuritySNMPV3 1 }
+
+genEquipSecuritySNMPV3AuthEntry OBJECT-TYPE
+ SYNTAX GenEquipSecuritySNMPV3AuthEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Security General File Transfer Configuration Table"
+ INDEX { genEquipSecuritySNMPV3AuthUserName }
+ ::= { genEquipSecuritySNMPV3AuthTable 1 }
+
+GenEquipSecuritySNMPV3AuthEntry ::=
+ SEQUENCE {
+ genEquipSecuritySNMPV3AuthUserName
+ DisplayString,
+ genEquipSecuritySNMPV3AuthPassword
+ DisplayString,
+ genEquipSecuritySNMPV3AuthSecurityMode
+ INTEGER,
+ genEquipSecuritySNMPV3AuthEncryptionMode
+ INTEGER,
+ genEquipSecuritySNMPV3AuthAuthenticationAlgorithm
+ INTEGER,
+ genEquipSecuritySNMPV3AuthAccessMode
+ INTEGER,
+ genEquipSecuritySNMPV3AuthRowStatus
+ RowStatus
+}
+
+genEquipSecuritySNMPV3AuthUserName OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This value is the V3 user name and the index of file v3 Authentication table."
+::= { genEquipSecuritySNMPV3AuthEntry 1 }
+
+genEquipSecuritySNMPV3AuthPassword OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This value is file V3 user authentication password."
+::= { genEquipSecuritySNMPV3AuthEntry 2 }
+
+genEquipSecuritySNMPV3AuthSecurityMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ noAuthNoPriv(1),
+ authNoPriv(2),
+ authPriv(3)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This is the user's security mode"
+::= { genEquipSecuritySNMPV3AuthEntry 3 }
+
+genEquipSecuritySNMPV3AuthEncryptionMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(1),
+ des(2),
+ aes(3)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This is the V3 encryption mode."
+::= { genEquipSecuritySNMPV3AuthEntry 4 }
+
+genEquipSecuritySNMPV3AuthAuthenticationAlgorithm OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(1),
+ sha(2),
+ md5(3)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This is the V3 authentication algorithm."
+::= { genEquipSecuritySNMPV3AuthEntry 5 }
+
+genEquipSecuritySNMPV3AuthAccessMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ readWrite(1),
+ readOnly(2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This is the V3 user access mode."
+::= { genEquipSecuritySNMPV3AuthEntry 6 }
+
+genEquipSecuritySNMPV3AuthRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This is the row status."
+::= { genEquipSecuritySNMPV3AuthEntry 30 }
+
+-- NG General Security params
+genEquipSecurityGen OBJECT IDENTIFIER ::= {genEquipSecurity 4}
+
+-- NG Security General File Transfer Configuration Table
+genEquipSecurityGenFTConfigTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipSecurityGenFTConfigEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Security General File Transfer Configuration Table."
+ ::= { genEquipSecurityGen 1 }
+
+genEquipSecurityGenFTConfigEntry OBJECT-TYPE
+ SYNTAX GenEquipSecurityGenFTConfigEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Security General File Transfer Configuration Table"
+ INDEX { genEquipSecurityGenFTConfigIndex }
+ ::= { genEquipSecurityGenFTConfigTable 1 }
+
+GenEquipSecurityGenFTConfigEntry ::=
+ SEQUENCE {
+ genEquipSecurityGenFTConfigIndex
+ INTEGER,
+ genEquipSecurityGenFTConfigProtocol
+ INTEGER,
+ genEquipSecurityGenFTConfigUsername
+ DisplayString,
+ genEquipSecurityGenFTConfigPassword
+ DisplayString,
+ genEquipSecurityGenFTConfigAddress
+ IpAddress,
+ genEquipSecurityGenFTConfigFilePath
+ DisplayString,
+ genEquipSecurityGenFTConfigFileName
+ DisplayString,
+ genEquipSecurityGenFTConfigIpV6Address
+ OCTET STRING
+
+}
+
+genEquipSecurityGenFTConfigIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This value is the index of file transfer table."
+::= { genEquipSecurityGenFTConfigEntry 1 }
+
+genEquipSecurityGenFTConfigProtocol OBJECT-TYPE
+ SYNTAX INTEGER {
+ ftp(0),
+ sftp(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This value is file transfer protocol."
+::= { genEquipSecurityGenFTConfigEntry 2 }
+
+genEquipSecurityGenFTConfigUsername OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This value is the user's name"
+::= { genEquipSecurityGenFTConfigEntry 3 }
+
+genEquipSecurityGenFTConfigPassword OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This value is the users password."
+::= { genEquipSecurityGenFTConfigEntry 4 }
+
+genEquipSecurityGenFTConfigAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This value is the server IP."
+::= { genEquipSecurityGenFTConfigEntry 5 }
+
+genEquipSecurityGenFTConfigFilePath OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This value is file path."
+::= { genEquipSecurityGenFTConfigEntry 6 }
+
+genEquipSecurityGenFTConfigFileName OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "This value is the file name."
+::= { genEquipSecurityGenFTConfigEntry 7 }
+
+genEquipSecurityGenFTConfigIpV6Address OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..16))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "IP address v6 of the server, where the file are to be transferred to/from."
+::= { genEquipSecurityGenFTConfigEntry 8 }
+
+-- NG Security General File Transfer Status Table
+genEquipSecurityGenFTStatusTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipSecurityGenFTStatusEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Security General File Transfer Status Table."
+ ::= { genEquipSecurityGen 2 }
+
+genEquipSecurityGenFTStatusEntry OBJECT-TYPE
+ SYNTAX GenEquipSecurityGenFTStatusEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Security General File Transfer Status Table."
+ INDEX { genEquipSecurityGenFTStatusIndex }
+ ::= { genEquipSecurityGenFTStatusTable 1 }
+
+GenEquipSecurityGenFTStatusEntry ::=
+ SEQUENCE {
+ genEquipSecurityGenFTStatusIndex
+ INTEGER,
+ genEquipSecurityGenFTStatusStatus
+ INTEGER,
+ genEquipSecurityGenFTStatusProgress
+ INTEGER
+}
+
+genEquipSecurityGenFTStatusIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This value is the index of file transfer status table."
+::= { genEquipSecurityGenFTStatusEntry 1 }
+
+genEquipSecurityGenFTStatusStatus OBJECT-TYPE
+ SYNTAX FTStatus
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "File transfer operation status."
+::= { genEquipSecurityGenFTStatusEntry 2 }
+
+genEquipSecurityGenFTStatusProgress OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Process prcentage"
+::= { genEquipSecurityGenFTStatusEntry 3 }
+
+-- General Security Scalars
+genEquipSecurityGenFTOperations OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0),
+ upload-security-log(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "File transfer operations"
+::= { genEquipSecurityGen 11 }
+
+genEquipSecurityGenImportExportAdmin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Admin for import or export security settings"
+::= { genEquipSecurityGen 12 }
+
+-- genEquipSecurityGenWarningBannerDel
+-- genEquipSecurityGenKeysGenerate
+-- genEquipSecurityGenCreateSelfCertificate
+-- genEquipSecurityGenCreateCSR
+
+-- NG Access Control Security params
+genEquipSecurityAccessControl OBJECT IDENTIFIER ::= {genEquipSecurity 5}
+
+-- NG Security Access Control Profile Table
+genEquipSecurityAccessControlProfileTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipSecurityAccessControlProfileEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Security Access Control Profile Table."
+ ::= { genEquipSecurityAccessControl 1 }
+
+genEquipSecurityAccessControlProfileEntry OBJECT-TYPE
+ SYNTAX GenEquipSecurityAccessControlProfileEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Security Access Control Profile Table Entry"
+ INDEX { genEquipSecurityAccessControlProfileName }
+ ::= { genEquipSecurityAccessControlProfileTable 1 }
+
+GenEquipSecurityAccessControlProfileEntry ::=
+ SEQUENCE {
+ genEquipSecurityAccessControlProfileName
+ DisplayString,
+ genEquipSecurityAccessControlProfileChannel
+ INTEGER,
+ genEquipSecurityAccessControlProfileUsed
+ INTEGER,
+ genEquipSecurityAccessControlProfileSecurityWrite
+ RbacAccessLevel,
+ genEquipSecurityAccessControlProfileSecurityRead
+ RbacAccessLevel,
+ genEquipSecurityAccessControlProfileMngWrite
+ RbacAccessLevel,
+ genEquipSecurityAccessControlProfileMngRead
+ RbacAccessLevel,
+ genEquipSecurityAccessControlProfileRadioWrite
+ RbacAccessLevel,
+ genEquipSecurityAccessControlProfileRadioRead
+ RbacAccessLevel,
+ genEquipSecurityAccessControlProfileTDMWrite
+ RbacAccessLevel,
+ genEquipSecurityAccessControlProfileTDMRead
+ RbacAccessLevel,
+ genEquipSecurityAccessControlProfileEthWrite
+ RbacAccessLevel,
+ genEquipSecurityAccessControlProfileEthRead
+ RbacAccessLevel,
+ genEquipSecurityAccessControlProfileSyncWrite
+ RbacAccessLevel,
+ genEquipSecurityAccessControlProfileSyncRead
+ RbacAccessLevel,
+ genEquipSecurityAccessControlProfileRowStatus
+ RowStatus
+}
+
+genEquipSecurityAccessControlProfileName OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "User profile name."
+::= { genEquipSecurityAccessControlProfileEntry 1 }
+
+genEquipSecurityAccessControlProfileChannel OBJECT-TYPE
+ SYNTAX INTEGER (0..127)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Permitted access channels."
+::= { genEquipSecurityAccessControlProfileEntry 2 }
+
+genEquipSecurityAccessControlProfileUsed OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicate whether the profile in used"
+::= { genEquipSecurityAccessControlProfileEntry 3 }
+
+genEquipSecurityAccessControlProfileSecurityWrite OBJECT-TYPE
+ SYNTAX RbacAccessLevel
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Security functional write access level."
+::= { genEquipSecurityAccessControlProfileEntry 4 }
+
+genEquipSecurityAccessControlProfileSecurityRead OBJECT-TYPE
+ SYNTAX RbacAccessLevel
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Security functional read access level."
+::= { genEquipSecurityAccessControlProfileEntry 5 }
+
+genEquipSecurityAccessControlProfileMngWrite OBJECT-TYPE
+ SYNTAX RbacAccessLevel
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Management functional write access level."
+::= { genEquipSecurityAccessControlProfileEntry 6 }
+
+genEquipSecurityAccessControlProfileMngRead OBJECT-TYPE
+ SYNTAX RbacAccessLevel
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Management functional read access level."
+::= { genEquipSecurityAccessControlProfileEntry 7 }
+
+genEquipSecurityAccessControlProfileRadioWrite OBJECT-TYPE
+ SYNTAX RbacAccessLevel
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Radio functional write access level."
+::= { genEquipSecurityAccessControlProfileEntry 8 }
+
+genEquipSecurityAccessControlProfileRadioRead OBJECT-TYPE
+ SYNTAX RbacAccessLevel
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Radio functional read access level."
+::= { genEquipSecurityAccessControlProfileEntry 9 }
+
+genEquipSecurityAccessControlProfileTDMWrite OBJECT-TYPE
+ SYNTAX RbacAccessLevel
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "TDM functional write access level."
+::= { genEquipSecurityAccessControlProfileEntry 10 }
+
+genEquipSecurityAccessControlProfileTDMRead OBJECT-TYPE
+ SYNTAX RbacAccessLevel
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "TDM functional read access level."
+::= { genEquipSecurityAccessControlProfileEntry 11 }
+
+genEquipSecurityAccessControlProfileEthWrite OBJECT-TYPE
+ SYNTAX RbacAccessLevel
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Ether functional write access level."
+::= { genEquipSecurityAccessControlProfileEntry 12 }
+
+genEquipSecurityAccessControlProfileEthRead OBJECT-TYPE
+ SYNTAX RbacAccessLevel
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Ether functional read access level."
+::= { genEquipSecurityAccessControlProfileEntry 13 }
+
+genEquipSecurityAccessControlProfileSyncWrite OBJECT-TYPE
+ SYNTAX RbacAccessLevel
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Sync functional write access level."
+::= { genEquipSecurityAccessControlProfileEntry 14 }
+
+genEquipSecurityAccessControlProfileSyncRead OBJECT-TYPE
+ SYNTAX RbacAccessLevel
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Sync functional read access level."
+::= { genEquipSecurityAccessControlProfileEntry 15 }
+
+genEquipSecurityAccessControlProfileRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Row Status for Profile table."
+::= { genEquipSecurityAccessControlProfileEntry 30 }
+
+-- NG Security Access Control User Table
+genEquipSecurityAccessControlUserTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipSecurityAccessControlUserEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Security Access Control User Table."
+ ::= { genEquipSecurityAccessControl 2 }
+
+genEquipSecurityAccessControlUserEntry OBJECT-TYPE
+ SYNTAX GenEquipSecurityAccessControlUserEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Security Access Control User Table Entry"
+ INDEX { genEquipSecurityAccessControlUserName }
+ ::= { genEquipSecurityAccessControlUserTable 1 }
+
+GenEquipSecurityAccessControlUserEntry ::=
+ SEQUENCE {
+ genEquipSecurityAccessControlUserName
+ DisplayString,
+ genEquipSecurityAccessControlUserProfile
+ DisplayString,
+ genEquipSecurityAccessControlUserPassword
+ DisplayString,
+ genEquipSecurityAccessControlUserExpired
+ INTEGER,
+ genEquipSecurityAccessControlUserBlock
+ NoYes,
+ genEquipSecurityAccessControlUserLastLogout
+ INTEGER,
+ genEquipSecurityAccessControlUserLoggedIn
+ NoYes,
+ genEquipSecurityAccessControlUserRowStatus
+ RowStatus
+}
+
+genEquipSecurityAccessControlUserName OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "User name."
+::= { genEquipSecurityAccessControlUserEntry 1 }
+
+genEquipSecurityAccessControlUserProfile OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "User's profile name."
+::= { genEquipSecurityAccessControlUserEntry 2 }
+
+genEquipSecurityAccessControlUserPassword OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "User's password"
+::= { genEquipSecurityAccessControlUserEntry 3 }
+
+genEquipSecurityAccessControlUserExpired OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "expired date of user account."
+::= { genEquipSecurityAccessControlUserEntry 4 }
+
+genEquipSecurityAccessControlUserBlock OBJECT-TYPE
+ SYNTAX NoYes
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Block user account."
+::= { genEquipSecurityAccessControlUserEntry 5 }
+
+genEquipSecurityAccessControlUserLastLogout OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Current login indication."
+::= { genEquipSecurityAccessControlUserEntry 6 }
+
+genEquipSecurityAccessControlUserLoggedIn OBJECT-TYPE
+ SYNTAX NoYes
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Current login indication."
+::= { genEquipSecurityAccessControlUserEntry 7 }
+
+genEquipSecurityAccessControlUserRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Row Status for users table."
+::= { genEquipSecurityAccessControlUserEntry 30 }
+
+-- NG Access Control Scalars
+genEquipSecurityAccessControlPassEnforceStrength OBJECT-TYPE
+ SYNTAX NoYes
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Enforce strength password."
+::= { genEquipSecurityAccessControl 11 }
+
+genEquipSecurityAccessControlPassFirstLoginChange OBJECT-TYPE
+ SYNTAX NoYes
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Password change for first login."
+::= { genEquipSecurityAccessControl 12 }
+
+genEquipSecurityAccessControlPassAging OBJECT-TYPE
+ SYNTAX NoYes
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Password aging."
+::= { genEquipSecurityAccessControl 13 }
+
+genEquipSecurityAccessControlFailureLoginAttempt OBJECT-TYPE
+ SYNTAX INTEGER (1..10)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Failure login threshold blocking user account."
+::= { genEquipSecurityAccessControl 14 }
+
+genEquipSecurityAccessControlBlockFailureLoginPeriod OBJECT-TYPE
+ SYNTAX INTEGER (0..60)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Blocking period due to failure login."
+::= { genEquipSecurityAccessControl 15 }
+
+genEquipSecurityAccessControlBlockunusedAccount OBJECT-TYPE
+ SYNTAX INTEGER (0..90)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Period time for block unused account."
+::= { genEquipSecurityAccessControl 16 }
+
+genEquipSecurityAccessControlBlockRootRemote OBJECT-TYPE
+ SYNTAX NoYes
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Root remote access."
+::= { genEquipSecurityAccessControl 17 }
+
+-- NG Protocols Control Security params
+genEquipSecurityProtocolsControl OBJECT IDENTIFIER ::= {genEquipSecurity 6}
+-- genEquipSecurityProtocolsControlSNMPTable
+
+-- genEquipSecurityProtocolsControlHTTPMode
+-- genEquipSecurityProtocolsControlHTTPSClientAuth
+-- genEquipSecurityProtocolsControlTelnetAdmin
+
+genEquipSecurityProtocolsControlAutoSessionTimeOut OBJECT-TYPE
+ SYNTAX INTEGER (1..60)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Logout session after incativity timeout."
+::= { genEquipSecurityProtocolsControl 1 }
+
+genEquipSecurityProtocolsControlSNMPAdmin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "SNMP Admin."
+::= { genEquipSecurityProtocolsControl 2}
+
+genEquipSecurityProtocolsControlSNMPOperStatus OBJECT-TYPE
+ SYNTAX DownUp
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "SNMP Operational Status."
+::= { genEquipSecurityProtocolsControl 3 }
+
+genEquipSecurityProtocolsControlSNMPTrapVersion OBJECT-TYPE
+ SYNTAX INTEGER {
+ v1(1),
+ v2(2),
+ v3(3)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "SNMP Trap version."
+::= { genEquipSecurityProtocolsControl 4 }
+
+genEquipSecurityProtocolsControlSNMPMIBVersion OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "SNMP MIB version."
+::= { genEquipSecurityProtocolsControl 5 }
+
+genEquipSecurityProtocolsControlSNMPV1V2Blocked OBJECT-TYPE
+ SYNTAX NoYes
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "SNMP V1V2 is blocked."
+::= { genEquipSecurityProtocolsControl 6 }
+
+genEquipSecurityProtocolsControlHTTPAdmin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "HTTP Admin."
+::= { genEquipSecurityProtocolsControl 7}
+
+
+-- NG Monitor and Logs Security params
+genEquipSecurityMonitorAndLogs OBJECT IDENTIFIER ::= {genEquipSecurity 7}
+
+-- Security Config Log Upload Configuration table file-transfer-config-table
+genEquipSecurityConfigLogUploadConfigTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipSecurityConfigLogUploadConfigEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Config Log Upload Configuration."
+ ::= { genEquipSecurityMonitorAndLogs 1 }
+
+genEquipSecurityConfigLogUploadConfigEntry OBJECT-TYPE
+ SYNTAX GenEquipSecurityConfigLogUploadConfigEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Config Log Upload Configuration Table Entry"
+ INDEX { genEquipSecurityConfigLogUploadConfigIndex }
+ ::= { genEquipSecurityConfigLogUploadConfigTable 1 }
+
+GenEquipSecurityConfigLogUploadConfigEntry ::=
+ SEQUENCE {
+ genEquipSecurityConfigLogUploadConfigIndex
+ INTEGER,
+ genEquipSecurityConfigLogUploadConfigProtocol
+ FtpProtocolType,
+ genEquipSecurityConfigLogUploadConfigUsername
+ DisplayString,
+ genEquipSecurityConfigLogUploadConfigPassword
+ DisplayString,
+ genEquipSecurityConfigLogUploadConfigIpaddress
+ IpAddress,
+ genEquipSecurityConfigLogUploadConfigPath
+ DisplayString,
+ genEquipSecurityConfigLogUploadConfigFilename
+ DisplayString,
+ genEquipSecurityConfigLogUploadConfigIpV6Address
+ OCTET STRING
+}
+
+genEquipSecurityConfigLogUploadConfigIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Config Log Upload Configuration index. has Fixed value of 1"
+::= { genEquipSecurityConfigLogUploadConfigEntry 1 }
+
+genEquipSecurityConfigLogUploadConfigProtocol OBJECT-TYPE
+ SYNTAX FtpProtocolType
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Config Log Upload Configuration Protocol."
+::= { genEquipSecurityConfigLogUploadConfigEntry 2 }
+
+genEquipSecurityConfigLogUploadConfigUsername OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Config Log Upload Username"
+::= { genEquipSecurityConfigLogUploadConfigEntry 3 }
+
+genEquipSecurityConfigLogUploadConfigPassword OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Config Log Upload Configuration Password."
+::= { genEquipSecurityConfigLogUploadConfigEntry 4 }
+
+genEquipSecurityConfigLogUploadConfigIpaddress OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Config Log Upload Configuration ip address (Ipv4)."
+::= { genEquipSecurityConfigLogUploadConfigEntry 5 }
+
+genEquipSecurityConfigLogUploadConfigPath OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Config Log Upload Configuration Path."
+::= { genEquipSecurityConfigLogUploadConfigEntry 6 }
+
+genEquipSecurityConfigLogUploadConfigFilename OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Config Log Upload Configuration Filename."
+::= { genEquipSecurityConfigLogUploadConfigEntry 7 }
+
+genEquipSecurityConfigLogUploadConfigIpV6Address OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..16))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Config Log Upload Configuration ip address (Ipv6)."
+::= { genEquipSecurityConfigLogUploadConfigEntry 8 }
+
+-- Security Config Log Upload Status table security-config-log-upload-status-table
+genEquipSecurityConfigLogUploadStatusTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipSecurityConfigLogUploadStatusEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Config Log Upload Status."
+ ::= { genEquipSecurityMonitorAndLogs 2 }
+
+genEquipSecurityConfigLogUploadStatusEntry OBJECT-TYPE
+ SYNTAX GenEquipSecurityConfigLogUploadStatusEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Config Log Upload Status Table Entry"
+ INDEX { genEquipSecurityConfigLogUploadStatusIndex }
+ ::= { genEquipSecurityConfigLogUploadStatusTable 1 }
+
+GenEquipSecurityConfigLogUploadStatusEntry ::=
+ SEQUENCE {
+ genEquipSecurityConfigLogUploadStatusIndex
+ INTEGER,
+ genEquipSecurityConfigLogUploadStatusStatus
+ FileTransferStatus,
+ genEquipSecurityConfigLogUploadStatusPrcntg
+ INTEGER
+}
+
+genEquipSecurityConfigLogUploadStatusIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Config Log Upload Status index. has Fixed value of 1"
+::= { genEquipSecurityConfigLogUploadStatusEntry 1 }
+
+genEquipSecurityConfigLogUploadStatusStatus OBJECT-TYPE
+ SYNTAX FileTransferStatus
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Config Log Upload Configuration Protocol."
+::= { genEquipSecurityConfigLogUploadStatusEntry 2 }
+
+genEquipSecurityConfigLogUploadStatusPrcntg OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Progress status in percentage."
+::= { genEquipSecurityConfigLogUploadStatusEntry 3 }
+
+
+-- Svcalars
+genEquipSecurityConfigLogUpload OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0),
+ upload-security-log(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Configuration Log Upload."
+::= { genEquipSecurityMonitorAndLogs 10 }
+
+
+-- NG Sequrity RADIUS
+genEquipSecurityRadiusServer OBJECT IDENTIFIER ::= {genEquipSecurity 8}
+
+-- NG Sequrity RADIUS table radius-configuration-table
+genEquipSecurityRadiusServerConfigurationTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipSecurityRadiusServerConfigurationEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Radius configuration table."
+ ::= { genEquipSecurityRadiusServer 1 }
+
+genEquipSecurityRadiusServerConfigurationEntry OBJECT-TYPE
+ SYNTAX GenEquipSecurityRadiusServerConfigurationEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Radius configuration table Entry"
+ INDEX { genEquipSecurityAccessControlRadiusServerId }
+ ::= { genEquipSecurityRadiusServerConfigurationTable 1 }
+
+GenEquipSecurityRadiusServerConfigurationEntry ::=
+ SEQUENCE {
+ genEquipSecurityAccessControlRadiusServerId
+ INTEGER,
+ genEquipSecurityAccessControlRadiusServerIpV4Address
+ IpAddress,
+ genEquipSecurityAccessControlRadiusServerIpv6Address
+ OCTET STRING,
+ genEquipSecurityAccessControlRadiusServerPort
+ INTEGER,
+ genEquipSecurityAccessControlRadiusServerRetries
+ INTEGER,
+ genEquipSecurityAccessControlRadiusServerTimeout
+ INTEGER,
+ genEquipSecurityAccessControlRadiusServerSharedSecret
+ OCTET STRING,
+ genEquipSecurityAccessControlRadiusServerConnectivityStatus
+ EnableDisable
+}
+
+genEquipSecurityAccessControlRadiusServerId OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Server id: 1 - primary, 2-secondary"
+::= { genEquipSecurityRadiusServerConfigurationEntry 1 }
+
+genEquipSecurityAccessControlRadiusServerIpV4Address OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The IP address of the RADIUS Server."
+::= { genEquipSecurityRadiusServerConfigurationEntry 2 }
+
+genEquipSecurityAccessControlRadiusServerIpv6Address OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..16))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The IP address of the RADIUS Server"
+::= { genEquipSecurityRadiusServerConfigurationEntry 3 }
+
+genEquipSecurityAccessControlRadiusServerPort OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The port ID of the RADIUS protocol in the RADIUS Server."
+::= { genEquipSecurityRadiusServerConfigurationEntry 4 }
+
+genEquipSecurityAccessControlRadiusServerRetries OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The number of times the agent will retry to communicate with the selected RADIUS server before declaring
+ the server to be not reachable."
+::= { genEquipSecurityRadiusServerConfigurationEntry 5 }
+
+genEquipSecurityAccessControlRadiusServerTimeout OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The timeout that the agent will wait in each communication with the selected RADIUS server
+ before retrying if no response is received."
+::= { genEquipSecurityRadiusServerConfigurationEntry 6 }
+
+genEquipSecurityAccessControlRadiusServerSharedSecret OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The shared secret of the Radius Server."
+::= { genEquipSecurityRadiusServerConfigurationEntry 7 }
+
+genEquipSecurityAccessControlRadiusServerConnectivityStatus OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The connectivity status of the RADIUS server in the last login tried."
+::= { genEquipSecurityRadiusServerConfigurationEntry 8 }
+
+
+
+-- NG Sequrity RADIUS table security-radius-user-access-control-table
+genEquipSecurityAccessControlRadiusUsersTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipSecurityAccessControlRadiusUsersEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Radius privilege table."
+ ::= { genEquipSecurityRadiusServer 2 }
+
+genEquipSecurityAccessControlRadiusUsersEntry OBJECT-TYPE
+ SYNTAX GenEquipSecurityAccessControlRadiusUsersEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Radius privilege table Entry"
+ INDEX { genEquipSecurityAccessControlRadiusUsersId }
+ ::= { genEquipSecurityAccessControlRadiusUsersTable 1 }
+
+GenEquipSecurityAccessControlRadiusUsersEntry ::=
+ SEQUENCE {
+ genEquipSecurityAccessControlRadiusUsersId
+ DisplayString,
+ genEquipSecurityAccessControlRadiusUserInstances
+ INTEGER,
+ genEquipSecurityAccessControlRadiusUsersAccessChannels
+ INTEGER,
+ genEquipSecurityAccessControlRadiusUsersEthReadLevel
+ RaduisAcceaaLevel,
+ genEquipSecurityAccessControlRadiusUsersEthWriteLevel
+ RaduisAcceaaLevel,
+ genEquipSecurityAccessControlRadiusUsersMngReadLevel
+ RaduisAcceaaLevel,
+ genEquipSecurityAccessControlRadiusUsersMngWriteLevel
+ RaduisAcceaaLevel,
+ genEquipSecurityAccessControlRadiusUsersRadioReadLevel
+ RaduisAcceaaLevel,
+ genEquipSecurityAccessControlRadiusUsersRadioWriteLevel
+ RaduisAcceaaLevel,
+ genEquipSecurityAccessControlRadiusUsersSecurityReadLevel
+ RaduisAcceaaLevel,
+ genEquipSecurityAccessControlRadiusUsersSecurityWriteLevel
+ RaduisAcceaaLevel,
+ genEquipSecurityAccessControlRadiusUsersSyncReadLevel
+ RaduisAcceaaLevel,
+ genEquipSecurityAccessControlRadiusUsersSyncWriteLevel
+ RaduisAcceaaLevel,
+ genEquipSecurityAccessControlRadiusUsersTdmReadLevel
+ RaduisAcceaaLevel,
+ genEquipSecurityAccessControlRadiusUsersTdmWriteLevel
+ RaduisAcceaaLevel
+}
+
+genEquipSecurityAccessControlRadiusUsersId OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "User ID"
+::= { genEquipSecurityAccessControlRadiusUsersEntry 1 }
+
+genEquipSecurityAccessControlRadiusUserInstances OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "A number of the same connected users."
+::= { genEquipSecurityAccessControlRadiusUsersEntry 2 }
+
+genEquipSecurityAccessControlRadiusUsersAccessChannels OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "A bits stands for each access channel: serial-0, telnet-1, ssh-2, web-3"
+::= { genEquipSecurityAccessControlRadiusUsersEntry 3 }
+
+genEquipSecurityAccessControlRadiusUsersEthReadLevel OBJECT-TYPE
+ SYNTAX RaduisAcceaaLevel
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The RADIUS permitted access for Ethernet Read Level functional group."
+::= { genEquipSecurityAccessControlRadiusUsersEntry 4 }
+
+genEquipSecurityAccessControlRadiusUsersEthWriteLevel OBJECT-TYPE
+ SYNTAX RaduisAcceaaLevel
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The RADIUS permitted access for Ethernet Write Level functional group."
+::= { genEquipSecurityAccessControlRadiusUsersEntry 5 }
+
+genEquipSecurityAccessControlRadiusUsersMngReadLevel OBJECT-TYPE
+ SYNTAX RaduisAcceaaLevel
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The RADIUS permitted access for MNG Read Level functional group."
+::= { genEquipSecurityAccessControlRadiusUsersEntry 6 }
+
+genEquipSecurityAccessControlRadiusUsersMngWriteLevel OBJECT-TYPE
+ SYNTAX RaduisAcceaaLevel
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The RADIUS permitted access for MNG Write Level functional group."
+::= { genEquipSecurityAccessControlRadiusUsersEntry 7 }
+
+genEquipSecurityAccessControlRadiusUsersRadioReadLevel OBJECT-TYPE
+ SYNTAX RaduisAcceaaLevel
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The RADIUS permitted access for Radio Read Level functional group."
+::= { genEquipSecurityAccessControlRadiusUsersEntry 8 }
+
+genEquipSecurityAccessControlRadiusUsersRadioWriteLevel OBJECT-TYPE
+ SYNTAX RaduisAcceaaLevel
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The RADIUS permitted access for Radio Write Level functional group."
+::= { genEquipSecurityAccessControlRadiusUsersEntry 9 }
+
+genEquipSecurityAccessControlRadiusUsersSecurityReadLevel OBJECT-TYPE
+ SYNTAX RaduisAcceaaLevel
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The RADIUS permitted access for Security Read Level functional group."
+::= { genEquipSecurityAccessControlRadiusUsersEntry 10 }
+
+genEquipSecurityAccessControlRadiusUsersSecurityWriteLevel OBJECT-TYPE
+ SYNTAX RaduisAcceaaLevel
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The RADIUS permitted access for Security Write Level functional group."
+::= { genEquipSecurityAccessControlRadiusUsersEntry 11 }
+
+genEquipSecurityAccessControlRadiusUsersSyncReadLevel OBJECT-TYPE
+ SYNTAX RaduisAcceaaLevel
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The RADIUS permitted access for Sync Read Level functional group."
+::= { genEquipSecurityAccessControlRadiusUsersEntry 12 }
+
+genEquipSecurityAccessControlRadiusUsersSyncWriteLevel OBJECT-TYPE
+ SYNTAX RaduisAcceaaLevel
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The RADIUS permitted access for Sync Write Level functional group."
+::= { genEquipSecurityAccessControlRadiusUsersEntry 13 }
+
+genEquipSecurityAccessControlRadiusUsersTdmReadLevel OBJECT-TYPE
+ SYNTAX RaduisAcceaaLevel
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The RADIUS permitted access for TDM Read Level functional group."
+::= { genEquipSecurityAccessControlRadiusUsersEntry 14 }
+
+genEquipSecurityAccessControlRadiusUsersTdmWriteLevel OBJECT-TYPE
+ SYNTAX RaduisAcceaaLevel
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The RADIUS permitted access for TDM Write Level functional group."
+::= { genEquipSecurityAccessControlRadiusUsersEntry 15 }
+
+--
+-- RADIUS Scalars
+genEquipSecurityRadiusAdmin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Control working withRadius Server."
+::= { genEquipSecurityRadiusServer 10 }
+
+
+-- NG Sequrity Certificate
+genEquipSecurityCertificate OBJECT IDENTIFIER ::= {genEquipSecurity 9}
+
+genEquipSecurityCsrCertificateFileTransferSet OBJECT-TYPE
+ SYNTAX CsrCertificateFTState
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "CSR generate and Upload."
+::= { genEquipSecurityCertificate 1 }
+
+genEquipSecurityCsrStatus OBJECT-TYPE
+ SYNTAX FTStatus
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Status of last geneate and upload."
+::= { genEquipSecurityCertificate 2 }
+
+genEquipSecurityCsrCertificateGenerateAndUploadPercentage OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Percentage of last generate CSR and upload."
+::= { genEquipSecurityCertificate 3 }
+
+genEquipSecurityCertificateInstallSet OBJECT-TYPE
+ SYNTAX OffOn
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Certificate Install."
+::= { genEquipSecurityCertificate 4 }
+
+genEquipSecurityCertificateDownloadStatus OBJECT-TYPE
+ SYNTAX FTStatus
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "tatus of last certificate download."
+::= { genEquipSecurityCertificate 5 }
+
+genEquipSecurityCertificateDownloadPercentage OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Percentage of certificate download operation."
+::= { genEquipSecurityCertificate 6 }
+
+
+-- NG Sequrity CSR Attributes Table security-csr-attributes-table
+genEquipSecurityCsrAttributesTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipSecurityCsrAttributesEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "CSR Attributes Table."
+ ::= { genEquipSecurityCertificate 10 }
+
+genEquipSecurityCsrAttributesEntry OBJECT-TYPE
+ SYNTAX GenEquipSecurityCsrAttributesEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "CSR Attributes Table Entry"
+ INDEX { genEquipSecurityCsrAttributesIndex }
+ ::= { genEquipSecurityCsrAttributesTable 1 }
+
+GenEquipSecurityCsrAttributesEntry ::=
+ SEQUENCE {
+ genEquipSecurityCsrAttributesIndex
+ INTEGER,
+ genEquipSecurityCsrAttributesCountry
+ DisplayString,
+ genEquipSecurityCsrAttributesLocality
+ DisplayString,
+ genEquipSecurityCsrAttributesState
+ DisplayString,
+ genEquipSecurityCsrAttributesOrganization
+ DisplayString,
+ genEquipSecurityCsrAttributesOu
+ DisplayString,
+ genEquipSecurityCsrAttributesCommonName
+ DisplayString,
+ genEquipSecurityCsrAttributesEmail
+ DisplayString,
+ genEquipSecurityCsrAttributesFileFormat
+ CsrFileFormat
+}
+
+genEquipSecurityCsrAttributesIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Index to table, constant 1"
+::= { genEquipSecurityCsrAttributesEntry 1 }
+
+genEquipSecurityCsrAttributesCountry OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The two-letter ISO abbreviation for your country (ISO3166-1) (example US)."
+::= { genEquipSecurityCsrAttributesEntry 2 }
+
+genEquipSecurityCsrAttributesLocality OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The city where your organization is legally located"
+::= { genEquipSecurityCsrAttributesEntry 3 }
+
+genEquipSecurityCsrAttributesState OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The state or province where your organization is legally located.
+ Can not be abbreviated."
+::= { genEquipSecurityCsrAttributesEntry 4 }
+
+genEquipSecurityCsrAttributesOrganization OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The exact legal name of your organization.
+ Do not abbreviate your organization name."
+::= { genEquipSecurityCsrAttributesEntry 5 }
+
+genEquipSecurityCsrAttributesOu OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Section of the organization. Example: Marketing."
+::= { genEquipSecurityCsrAttributesEntry 6 }
+
+genEquipSecurityCsrAttributesCommonName OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The fully qualified domain name for your web server.
+ This must be an exact match."
+::= { genEquipSecurityCsrAttributesEntry 7 }
+
+genEquipSecurityCsrAttributesEmail OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "An email address used to contact your organization."
+::= { genEquipSecurityCsrAttributesEntry 8 }
+
+genEquipSecurityCsrAttributesFileFormat OBJECT-TYPE
+ SYNTAX CsrFileFormat
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "CSR file format. PEM or DER."
+::= { genEquipSecurityCsrAttributesEntry 9 }
+
+-- NG Sequrity CSR Upload Configuration Table security-csr-upload-configuration-table
+genEquipSecurityCsrUploadConfigTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipSecurityCsrUploadConfigEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "CSR (Certificate Request) Upload Configuration Table."
+ ::= { genEquipSecurityCertificate 11 }
+
+genEquipSecurityCsrUploadConfigEntry OBJECT-TYPE
+ SYNTAX GenEquipSecurityCsrUploadConfigEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "CSR (Certificate Request) Upload Configuration Table Entry"
+ INDEX { genEquipSecurityCsrUploadConfigIndex }
+ ::= { genEquipSecurityCsrUploadConfigTable 1 }
+
+GenEquipSecurityCsrUploadConfigEntry ::=
+ SEQUENCE {
+ genEquipSecurityCsrUploadConfigIndex
+ INTEGER,
+ genEquipSecurityCsrUploadConfigIpv4Address
+ IpAddress,
+ genEquipSecurityCsrUploadConfigIpV6Address
+ OCTET STRING,
+ genEquipSecurityCsrUploadConfigTableUsername
+ DisplayString,
+ genEquipSecurityCsrUploadConfigPassword
+ DisplayString,
+ genEquipSecurityCsrUploadConfigPath
+ DisplayString,
+ genEquipSecurityCsrUploadConfigFilename
+ DisplayString
+}
+
+genEquipSecurityCsrUploadConfigIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "CSR upload Configuration index. has Fixed value of 1"
+::= { genEquipSecurityCsrUploadConfigEntry 1 }
+
+genEquipSecurityCsrUploadConfigIpv4Address OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "IPv4 address of the server, where the file are to be transferred to/from."
+::= { genEquipSecurityCsrUploadConfigEntry 2 }
+
+genEquipSecurityCsrUploadConfigIpV6Address OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..16))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "IPv6 address of the server, where the file are to be transferred to/from"
+::= { genEquipSecurityCsrUploadConfigEntry 3 }
+
+genEquipSecurityCsrUploadConfigTableUsername OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "User name for accesssing files in the server (User credentials to access server)."
+::= { genEquipSecurityCsrUploadConfigEntry 4 }
+
+genEquipSecurityCsrUploadConfigPassword OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Password (User credentials to access server)."
+::= { genEquipSecurityCsrUploadConfigEntry 5 }
+
+genEquipSecurityCsrUploadConfigPath OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Location of file in the server (folder)."
+::= { genEquipSecurityCsrUploadConfigEntry 6 }
+
+genEquipSecurityCsrUploadConfigFilename OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Filename in the server, where the file are to be transferred to/from."
+::= { genEquipSecurityCsrUploadConfigEntry 7 }
+
+-- NG Sequrity CSR (Certificate Request) Download Configuration Table security-certificate-download-configuration-table
+genEquipSecurityCertificateDownloadConfigTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipSecurityCertificateDownloadConfigEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "CSR (Certificate Request) Download Configuration Table."
+ ::= { genEquipSecurityCertificate 12 }
+
+genEquipSecurityCertificateDownloadConfigEntry OBJECT-TYPE
+ SYNTAX GenEquipSecurityCertificateDownloadConfigEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "CSR (Certificate Request) Download Configuration Table Entry"
+ INDEX { genEquipSecurityCertificateDownloadConfigIndex }
+ ::= { genEquipSecurityCertificateDownloadConfigTable 1 }
+
+GenEquipSecurityCertificateDownloadConfigEntry ::=
+ SEQUENCE {
+ genEquipSecurityCertificateDownloadConfigIndex
+ INTEGER,
+ genEquipSecurityCertificateDownloadConfigIpv4Address
+ IpAddress,
+ genEquipSecurityCertificateDownloadConfigIpV6Address
+ OCTET STRING,
+ genEquipSecurityCertificateDownloadConfigUsername
+ DisplayString,
+ genEquipSecurityCertificateDownloadConfigPassword
+ DisplayString,
+ genEquipSecurityCertificateDownloadConfigPath
+ DisplayString,
+ genEquipSecurityCertificateDownloadConfigFilename
+ DisplayString
+}
+
+genEquipSecurityCertificateDownloadConfigIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Certificate download configuration index. has Fixed value of 1"
+::= { genEquipSecurityCertificateDownloadConfigEntry 1 }
+
+genEquipSecurityCertificateDownloadConfigIpv4Address OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "IPv4 address of the server, where the file are to be transferred to/from."
+::= { genEquipSecurityCertificateDownloadConfigEntry 2 }
+
+genEquipSecurityCertificateDownloadConfigIpV6Address OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..16))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "IPv6 address of the server, where the file are to be transferred to/from"
+::= { genEquipSecurityCertificateDownloadConfigEntry 3 }
+
+genEquipSecurityCertificateDownloadConfigUsername OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "User name for accesssing files in the server (User credentials to access server)."
+::= { genEquipSecurityCertificateDownloadConfigEntry 4 }
+
+genEquipSecurityCertificateDownloadConfigPassword OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Password (User credentials to access server)."
+::= { genEquipSecurityCertificateDownloadConfigEntry 5 }
+
+genEquipSecurityCertificateDownloadConfigPath OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Location of file in the server (folder)."
+::= { genEquipSecurityCertificateDownloadConfigEntry 6 }
+
+genEquipSecurityCertificateDownloadConfigFilename OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Filename in the server, where the file are to be transferred to/from."
+::= { genEquipSecurityCertificateDownloadConfigEntry 7 }
+
+
+
+
+-- TRAP Section moved to MWRM-NETWORK-MIB
+
+END \ No newline at end of file
generated by cgit v1.2.3 (git 2.46.0) at 2026-02-26 15:25:52 +0000