summaryrefslogtreecommitdiff
path: root/MIBS/ceraos/MWRM-NETWORK-MIB
diff options
context:
space:
mode:
authorDavid Leutgeb <david.leutgeb@mannundmouse.com>2023-12-05 12:25:34 +0100
committerDavid Leutgeb <david.leutgeb@mannundmouse.com>2023-12-05 12:25:34 +0100
commit98a672123c7872f6b9b75a9a2b6bb3aea504de6a (patch)
tree9b13bd7f563c3198047bd359195327cf28b3caf0 /MIBS/ceraos/MWRM-NETWORK-MIB
downloadmibs-98a672123c7872f6b9b75a9a2b6bb3aea504de6a.tar.gz
mibs-98a672123c7872f6b9b75a9a2b6bb3aea504de6a.zip
Initial commitHEADmain
Diffstat (limited to 'MIBS/ceraos/MWRM-NETWORK-MIB')
-rw-r--r--MIBS/ceraos/MWRM-NETWORK-MIB15536
1 files changed, 15536 insertions, 0 deletions
diff --git a/MIBS/ceraos/MWRM-NETWORK-MIB b/MIBS/ceraos/MWRM-NETWORK-MIB
new file mode 100644
index 0000000..056fa27
--- /dev/null
+++ b/MIBS/ceraos/MWRM-NETWORK-MIB
@@ -0,0 +1,15536 @@
+--MWRM-NETWORK-MIB VERSION 1.8.3.2
+--MWRM (MicroWave-Radio-MIB)
+MWRM-NETWORK-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+-- Ipv6Address FROM IPV6-TC
+-- Counter, enterprises, Gauge, IpAddress FROM RFC1155-SMI
+ Counter32, enterprises, Gauge32, IpAddress FROM SNMPv2-SMI
+ DisplayString, ifIndex FROM RFC1213-MIB
+ RowStatus FROM SNMPv2-TC
+ MacAddress FROM SNMPv2-TC
+ OBJECT-TYPE FROM SNMPv2-SMI
+ TRAP-TYPE FROM RFC-1215
+
+ EnableDisable FROM MWRM-UNIT-MIB
+ EnableDisableSMI2 FROM MWRM-UNIT-MIB
+ OffOn FROM MWRM-UNIT-MIB
+ MetricImperial FROM MWRM-UNIT-MIB
+ AllowedNotAllowed FROM MWRM-UNIT-MIB
+ ProgressStatus FROM MWRM-UNIT-MIB
+ Severity FROM MWRM-UNIT-MIB
+ NoYes FROM MWRM-UNIT-MIB
+ DownUp FROM MWRM-UNIT-MIB
+ TrailIfType FROM MWRM-UNIT-MIB
+ PmTableType FROM MWRM-UNIT-MIB
+ RateMbps FROM MWRM-UNIT-MIB
+ HalfFull FROM MWRM-UNIT-MIB
+ BerLevel FROM MWRM-UNIT-MIB
+ SignalLevel FROM MWRM-UNIT-MIB
+ LoopbackType FROM MWRM-UNIT-MIB
+ QueueName FROM MWRM-UNIT-MIB
+ RadioId FROM MWRM-UNIT-MIB
+ RfuId FROM MWRM-UNIT-MIB
+ SwCommand FROM MWRM-UNIT-MIB
+ TrailProtectedType FROM MWRM-UNIT-MIB
+ ClockSrc FROM MWRM-UNIT-MIB
+ SlotId FROM MWRM-UNIT-MIB
+ Integrity FROM MWRM-UNIT-MIB
+ GreenYellow FROM MWRM-UNIT-MIB
+ InputSeverity FROM MWRM-UNIT-MIB
+ SwCommandTimer FROM MWRM-UNIT-MIB;
+
+microwave-radio OBJECT IDENTIFIER ::= { enterprises 2281 }
+genEquip OBJECT IDENTIFIER ::= { microwave-radio 10}
+genEquipUnit OBJECT IDENTIFIER ::= { genEquip 1}
+
+-- Local enumeration types
+MediaType ::= INTEGER {
+ auto-type(0),
+ rj45(1),
+ sfp(2),
+ radio(3),
+ pwe3(4)
+ }
+
+AutoNegMode ::= INTEGER {
+ off(0),
+ on(1),
+ restart(2)
+ }
+
+SpeedDefs ::= INTEGER {
+ speed-10(0),
+ speed-100(1),
+ speed-1000(2),
+ speed-2500(3),
+ speed-10000(4)
+ }
+
+MasterSalveSetMode ::= INTEGER {
+ auto(0),
+ slave(1),
+ master(2)
+ }
+
+FlowControl ::= INTEGER {
+ disable(0),
+ rx(1),
+ tx-rx(2)
+ }
+
+PortType ::= INTEGER {
+ management(0),
+ line(1),
+ radio(2),
+ pwe(3),
+ cpu(4)
+ }
+
+EdgePortType ::= INTEGER {
+ none(0),
+ edge(1)
+ }
+
+TrustMode ::= INTEGER {
+ untrust(0),
+ trust(1)
+ }
+
+ServiceType ::= INTEGER {
+ mng(0),
+ mp(1),
+ p2p(2)
+ }
+
+ServiceSubType ::= INTEGER {
+ ethernet(0),
+ tdm(1),
+ pwe(2)
+ }
+
+ServiceAdmin ::= INTEGER {
+ reserved(0),
+ operational(1)
+ }
+
+ServiceCosMode ::= INTEGER {
+ default-cos(0),
+ preserve-sp-cos(1)
+ }
+
+SPType ::= INTEGER {
+ sap(0),
+ snp(1),
+ mng(2),
+ pipe(3)
+ }
+
+SPSubType ::= INTEGER {
+ dot1q(0),
+ s-tag(1),
+ bundle-c(2),
+ bundle-s(3),
+ all-to-one(4),
+ qinq(5)
+ }
+
+DisableAllowed ::= INTEGER {
+ disable(0),
+ allow(1)
+ }
+
+SPCosMode ::= INTEGER {
+ sp-def-cos(0),
+ interface-decision(1),
+ pc1(2),
+ tcam(3)
+ }
+
+SplitHorizonGroup ::= INTEGER {
+ group-a(0),
+ group-b(1),
+ group-c(2),
+ group-d(3)
+ }
+
+TrueFalse ::= INTEGER {
+ false(0),
+ true(1)
+ }
+
+PolicerType ::= INTEGER {
+ mef-trtcm(0)
+ }
+
+PolicerColorMode ::= INTEGER {
+ color-blind(0),
+ color-aware(1)
+ }
+
+PWfpClockSignal ::= INTEGER {
+ sync(0),
+ unframed(1),
+ e1-mf(2),
+ e1-mf-crc(3),
+ ds1-d4(4),
+ ds1-esf(5)
+ }
+
+PWCclockSysRef ::= INTEGER {
+ none(0),
+ front-panel(1),
+ clock-recovery(2)
+ }
+
+PWCDiffClockSrc ::= INTEGER {
+ none(0),
+ front-panel(1),
+ sys-ref(2),
+ clock-1588(3)
+ }
+
+PWRtpTimeStampMode ::= INTEGER {
+ absolute(0),
+ differential(1)
+ }
+
+PWTunnelPsnType ::= INTEGER {
+ upd-ip(0),
+ eth(1),
+ mpls(2)
+ }
+
+PWTunnelVlanType ::= INTEGER {
+ none(0),
+ c-type(1),
+ s-type(2)
+ }
+
+PWPDHClockSource ::= INTEGER {
+ sys-ref(0),
+ rx-sdh(1),
+ internal(2)
+ }
+
+TunnelGroupProtectionCmd ::= INTEGER {
+ no-request(0),
+ force-switch(1),
+ manual-switch(2),
+ lockout(3),
+ clear(4)
+ }
+
+PWSOAMccmInterval ::= INTEGER {
+ n3-3-ms(0),
+ n10-ms(1),
+ n100-ms(2),
+ n1-s(3),
+ n10-s(4),
+ n1-m(5),
+ n10-m(6)
+ }
+
+Dot1CfmInterfaceStatus ::= INTEGER {
+ no-interface(0),
+ up(1),
+ down(2),
+ testing(3),
+ unknown(4),
+ dormant(5),
+ not-present(6),
+ lower-layer-down(7)
+ }
+
+BurstType ::= INTEGER {
+ short(0),
+ long(1)
+ }
+
+IfMgrTrueFalse ::= INTEGER {
+ true(1),
+ false(2)
+ }
+
+MibTrueFalse ::= INTEGER {
+ true(1),
+ false(2)
+ }
+
+G8032LastState ::= INTEGER {
+ nr(0),
+ raps-nr(1),
+ raps-rb-nr(2),
+ running-wtb(3),
+ expired-wtb(4),
+ running-wtr(5),
+ expired-wtr(6),
+ ms(7),
+ raps-ms(8),
+ raps-sd(9),
+ clear-sd(10),
+ local-sd(11),
+ raps-sf(12),
+ clear-sf(13),
+ local-sf(14),
+ raps-fs(15),
+ fs(16),
+ clear(17)
+ }
+
+TDMLoopbackType ::= INTEGER {
+ none(0),
+ towards-line(1),
+ towards-system(2)
+ }
+
+RSTLoopbackType ::= INTEGER {
+ none(0),
+ towards-system(1),
+ towards-line(2)
+ }
+
+LBState ::=INTEGER {
+ soamLbInactive(0),
+ soamLbActive(1),
+ soamLbStopped(2),
+ soamLbCompleted(3),
+ soamLbFailed(4)
+ }
+
+
+-- Network
+genEquipNetwork OBJECT IDENTIFIER ::= {genEquip 2}
+
+genEquipNetworkRemoteIp OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-only
+ STATUS obsolete
+ DESCRIPTION
+"This value indicates the Remote IP address."
+::= { genEquipNetwork 1 }
+
+genEquipNetworkMateIp OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+"This value indicates the Mate IP address. (same as genEquipProtectionMateIPAddr)"
+::= { genEquipNetwork 2 }
+
+genEquipNetworkAgentIp OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-only
+ STATUS obsolete
+ DESCRIPTION
+"This value indicates the Agent IP address. (same as genEquipNetworkManagmentLocalIp)"
+::= { genEquipNetwork 3 }
+
+
+--- Network Managment information
+genEquipNetworkManagment OBJECT IDENTIFIER ::= { genEquipNetwork 4}
+
+genEquipNetworkManagmentLocalIp OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This value indicates the local IP address. (same as genEquipNetworkAgentIp)"
+::= { genEquipNetworkManagment 1 }
+
+genEquipNetworkManagmentLocalSubnetMask OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This value indicates the local subnet mask. (for example 255.255.255.0)"
+::= { genEquipNetworkManagment 2 }
+
+genEquipNetworkManagmentLocalDefaultGateway OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This value indicates the local default gateway."
+::= { genEquipNetworkManagment 3 }
+
+genEquipNetworkManagmentLocalHWAddr OBJECT-TYPE
+ SYNTAX MacAddress
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "This value indicates the MAC Address used for management (related to the management IP address of the system)."
+::= { genEquipNetworkManagment 4 }
+
+genEquipNetworkManagmentRemoteSubnetMask OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-write
+ STATUS obsolete
+ DESCRIPTION
+ "This value indicates the Remote subnet mask.(for example 255.255.255.0)"
+::= { genEquipNetworkManagment 5 }
+
+genEquipNetworkManagmentNumOfPorts OBJECT-TYPE
+ SYNTAX INTEGER (0..3)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This value indicates the number of management ports."
+::= { genEquipNetworkManagment 6 }
+
+genEquipNetworkManagmentInBandVLAN OBJECT-TYPE
+ SYNTAX INTEGER (1..4090)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This value indicates the number of in-band VLANs."
+::= { genEquipNetworkManagment 7 }
+
+genEquipNetworkManagmentPortType OBJECT-TYPE
+ SYNTAX INTEGER { outOfBand(0), inBand(1) }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This is a configurable option to use in-band or out-of-band management."
+::= { genEquipNetworkManagment 8 }
+
+genEquipNetworkManagmentPortCapacity OBJECT-TYPE
+ SYNTAX INTEGER {
+ n64(0),
+ n128(1),
+ n256(2),
+ n512(3),
+ n1024(4),
+ n2048(5)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This value indicates a limit rate for the management port capacity in kbps."
+::= { genEquipNetworkManagment 9 }
+
+genEquipNetworkManagmentPortAutoNegotiation OBJECT-TYPE
+ SYNTAX OffOn
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Enable or disable the Auto Negotiation option, on all management ports."
+::= { genEquipNetworkManagment 10 }
+
+genEquipNetworkManagmentPortRate OBJECT-TYPE
+ SYNTAX INTEGER {
+ not-applicable(-1),
+ n10(0),
+ n100(1),
+ n1000(2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This value indicates the port rate in Mbps (all management ports).
+ Possible values are:
+ - n10(0) 10Mbps
+ - n100(1) 100Mbps
+ - n1000(2) 1000Mbps"
+::= { genEquipNetworkManagment 11 }
+
+genEquipNetworkManagmentPortDuplex OBJECT-TYPE
+ SYNTAX INTEGER { half(0), full(1) }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This value indicates the port duplex value, for all management ports."
+::= { genEquipNetworkManagment 12 }
+
+genEquipNetworkManagmentBlockMngTowardsLine OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Blocking the in-band management frames to egress via the Ethernet line interface in pipe application."
+::= { genEquipNetworkManagment 13 }
+
+genEquipNetworkManagmentIpAddrCfgTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipNetworkManagmentIpAddrCfgEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table keeps the information about the neighbour attributes, such as IP address, MAC address, slot,
+ port number and description. It can be used by the NMS for topology discovery."
+ ::= { genEquipNetworkManagment 20 }
+
+genEquipNetworkManagmentIpAddrCfgEntry OBJECT-TYPE
+ SYNTAX GenEquipNetworkManagmentIpAddrCfgEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table keeps the information about the neighbour attributes, such as IP address, MAC address, slot,
+ port number and description. It can be used by the NMS for topology discovery."
+ INDEX { genEquipNetworkManagmentIpAddrCfgMngId }
+ ::= { genEquipNetworkManagmentIpAddrCfgTable 1 }
+
+GenEquipNetworkManagmentIpAddrCfgEntry ::=
+ SEQUENCE {
+ genEquipNetworkManagmentIpAddrCfgMngId
+ INTEGER,
+ genEquipNetworkManagmentIpAddrCfgIpv4Address
+ IpAddress,
+ genEquipNetworkManagmentIpAddrCfgIpv4SubnetMask
+ IpAddress,
+ genEquipNetworkManagmentIpAddrCfgDefaultGateway
+ IpAddress,
+ genEquipNetworkManagmentIpAddrCfgIpv6Address
+ OCTET STRING,
+ genEquipNetworkManagmentIpAddrCfgIpv6PrefixLength
+ INTEGER,
+ genEquipNetworkManagmentIpAddrCfgDefaultGatewayIPv6
+ OCTET STRING
+}
+
+genEquipNetworkManagmentIpAddrCfgMngId OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Management Ifindex."
+ ::= { genEquipNetworkManagmentIpAddrCfgEntry 1 }
+
+genEquipNetworkManagmentIpAddrCfgIpv4Address OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This value indicates the local IP address"
+ ::= { genEquipNetworkManagmentIpAddrCfgEntry 2 }
+
+genEquipNetworkManagmentIpAddrCfgIpv4SubnetMask OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This value indicates the local subnet mask. (for example 255.255.255.0)"
+ ::= { genEquipNetworkManagmentIpAddrCfgEntry 3 }
+
+genEquipNetworkManagmentIpAddrCfgDefaultGateway OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This value indicates the local default gateway."
+ ::= { genEquipNetworkManagmentIpAddrCfgEntry 4 }
+
+genEquipNetworkManagmentIpAddrCfgIpv6Address OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..16))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This value indicates the Local IPv6.
+ y is a 16-bit hexadecimal field of the form xxxx, where x takes values from 0 to F."
+ ::= { genEquipNetworkManagmentIpAddrCfgEntry 5 }
+
+genEquipNetworkManagmentIpAddrCfgIpv6PrefixLength OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "IPv6 Prefix-Length specifies the IPv6 subnet."
+ ::= { genEquipNetworkManagmentIpAddrCfgEntry 6 }
+
+genEquipNetworkManagmentIpAddrCfgDefaultGatewayIPv6 OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..16))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This value indicates the local IPv6 default gateway."
+ ::= { genEquipNetworkManagmentIpAddrCfgEntry 7 }
+
+
+--- IP Table information
+genEquipNetworkIP OBJECT IDENTIFIER ::= { genEquipNetwork 5}
+
+genEquipNetworkIPTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipNetworkIPEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table keeps the information about the neighbour attributes, such as IP address, MAC address, slot,
+ port number and description. It can be used by the NMS for topology discovery."
+ ::= { genEquipNetworkIP 1 }
+
+genEquipNetworkIPEntry OBJECT-TYPE
+ SYNTAX GenEquipNetworkIPEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table keeps the information about the neighbour attributes, such as IP address, MAC address, slot,
+ port number and description. It can be used by the NMS for topology discovery."
+ INDEX { ifIndex }
+ ::= { genEquipNetworkIPTable 1 }
+
+GenEquipNetworkIPEntry ::=
+ SEQUENCE {
+ genEquipNetworkIPEthernetPort
+ INTEGER,
+ genEquipNetworkIPPeerMacAddr
+ OCTET STRING,
+ genEquipNetworkIPPeerIPAddr
+ IpAddress,
+ genEquipNetworkIPPeerSlotID
+ INTEGER,
+ genEquipNetworkIPPeerPortNumber
+ INTEGER,
+ genEquipNetworkIPPeerDescr
+ DisplayString,
+ genEquipNetworkIPPeerNodeToNodeConnection
+ EnableDisable
+}
+
+genEquipNetworkIPEthernetPort OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Ethernet port (local port) is the index of the table, to be taken from ifIndex."
+ ::= { genEquipNetworkIPEntry 1 }
+
+genEquipNetworkIPPeerMacAddr OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The Peer (far-end) Mac address of the managed NE (CPU) connected on the local Ethernet port"
+ ::= { genEquipNetworkIPEntry 2 }
+
+genEquipNetworkIPPeerIPAddr OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The Peer (far-end) IP address of the managed NE (CPU) connected on the local Ethernet port"
+ ::= { genEquipNetworkIPEntry 3 }
+
+genEquipNetworkIPPeerSlotID OBJECT-TYPE
+ SYNTAX INTEGER (0..31)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The Peer (far-end) slot-id of the managed NE connected on the local Ethernet port."
+ ::= { genEquipNetworkIPEntry 4 }
+
+genEquipNetworkIPPeerPortNumber OBJECT-TYPE
+ SYNTAX INTEGER (0..255)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The Peer (far-end) port number of the managed NE connected on the local Ethernet port. The port number is sequential
+ starting with 1"
+ ::= { genEquipNetworkIPEntry 5 }
+
+genEquipNetworkIPPeerDescr OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..64))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "User defined description for the peer port"
+ ::= { genEquipNetworkIPEntry 6 }
+
+genEquipNetworkIPPeerNodeToNodeConnection OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Node To Node Connection.
+ This column is relevant only for STM-1/OC-3 connections.
+ if this parameter is enabled, it means that the STM-1/OC-3 port is connected with another microwave-radio NE,
+ the STM-1/OC-3 port is not an access port, it is used by the NMS to find TDM trails."
+ ::= { genEquipNetworkIPEntry 7 }
+
+
+genEquipNetworkIPClearAllPeerInfo OBJECT-TYPE
+ SYNTAX OffOn
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This parameter is a command to clear the neighbor IP table info"
+ ::= { genEquipNetworkIP 2 }
+
+genEquipNetworkFloatingIp OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+"This value indicates the floating IP used when system is in protection mode.
+This address must differ from system's own IP address (genEquipNetworkAgentIp)
+as well as mate unit's (genEquipProtectionMateIPAddr)and must be in the same subnet.
+A value of 0.0.0.0 will disable the feature."
+::= { genEquipNetwork 6 }
+
+genEquipNetworkAgentIpV6 OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "This value indicates the agent IP V6. This parameter will be use for Trap only."
+::= { genEquipNetwork 7 }
+
+-- Services Configuration
+genEquipServices OBJECT IDENTIFIER ::= {genEquip 8}
+-- Ethernet Switch
+genEquipEthernetSwitch OBJECT IDENTIFIER ::= {genEquipServices 1}
+
+-- Ethernet Switch configuration
+genEquipEthernetSwitchCfg OBJECT IDENTIFIER ::= {genEquipEthernetSwitch 1}
+
+genEquipEthernetSwitchCfgAppType OBJECT-TYPE
+ SYNTAX INTEGER {
+ single-pipe(1),
+ managed-switch(2),
+ metro-switch(3)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The mode of the switch application. Note, managed-switch or metro-swtich require license.
+ Single-pipe: No switching is done, the NE acts as a Pipe.
+ Managed-switch: The switch application is configured as IEEE 802.1Q switch.
+ Metro-switch: The switch application is configured as IEEE 802.1ad switch."
+ ::= { genEquipEthernetSwitchCfg 1 }
+
+genEquipEthernetSwitchCfgVIDTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipEthernetSwitchCfgVIDEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "The switch VLAN table."
+ ::= { genEquipEthernetSwitchCfg 2 }
+
+genEquipEthernetSwitchCfgVIDEntry OBJECT-TYPE
+ SYNTAX GenEquipEthernetSwitchCfgVIDEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "The switch VLAN table."
+ INDEX { genEquipEthernetSwitchCfgVIDIndex }
+ ::= { genEquipEthernetSwitchCfgVIDTable 1 }
+
+GenEquipEthernetSwitchCfgVIDEntry ::=
+ SEQUENCE {
+ genEquipEthernetSwitchCfgVIDIndex
+ INTEGER,
+ genEquipEthernetSwitchCfgVIDName
+ DisplayString,
+ genEquipEthernetSwitchCfgVIDState
+ INTEGER,
+ genEquipEthernetSwitchCfgVIDMemberPorts
+ DisplayString,
+ genEquipEthernetSwitchCfgVIDEVCID
+ DisplayString,
+ genEquipEthernetSwitchCfgVIDEVCDescription
+ DisplayString,
+ genEquipEthernetSwitchCfgVIDRowStatus
+ RowStatus
+}
+
+genEquipEthernetSwitchCfgVIDIndex OBJECT-TYPE
+ SYNTAX INTEGER (0..4095)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "VLAN number, the index of the table."
+ ::= { genEquipEthernetSwitchCfgVIDEntry 1 }
+
+genEquipEthernetSwitchCfgVIDName OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "VLAN name."
+ ::= { genEquipEthernetSwitchCfgVIDEntry 2 }
+
+genEquipEthernetSwitchCfgVIDState OBJECT-TYPE
+ SYNTAX INTEGER {
+ suspend(1),
+ active(2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "VLAN state."
+ ::= { genEquipEthernetSwitchCfgVIDEntry 3 }
+
+genEquipEthernetSwitchCfgVIDMemberPorts OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "A string that indicates in which ports this VLAN is allowed. Port numbers are separated by spaces"
+ ::= { genEquipEthernetSwitchCfgVIDEntry 4 }
+
+genEquipEthernetSwitchCfgVIDEVCID OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This parameter defines a name for the Ethernet service running over this VLAN.
+ This information is used by the NMS as a service identifier"
+ ::= { genEquipEthernetSwitchCfgVIDEntry 5 }
+
+genEquipEthernetSwitchCfgVIDEVCDescription OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This parameter allows adding a description for the Ethernet service running over this VLAN.
+ This information is informational only for users purposes"
+ ::= { genEquipEthernetSwitchCfgVIDEntry 6 }
+
+genEquipEthernetSwitchCfgVIDRowStatus OBJECT-TYPE
+ SYNTAX RowStatus -- active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The raw status of the vlan table."
+ ::= { genEquipEthernetSwitchCfgVIDEntry 30 }
+
+genEquipEthernetSwitchCfgPbbteEthertype OBJECT-TYPE
+ SYNTAX INTEGER (0..65535)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The PBB-TE-Tag ethertype value"
+ ::= { genEquipEthernetSwitchCfg 3 }
+
+genEquipEthernetSwitchCfgProviderEthertype OBJECT-TYPE
+ SYNTAX INTEGER {
+ i0x8100(0),
+ i0x88A8(1),
+ i0x9100(2),
+ i0x9200(3)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Ethertype of the provider VLANS (S-tag). This parameter configures the Marvell switch
+ and it applys for all the ethernet ports. Possible choises are { 0x8100 , 0x9100 , 0x88A8 , 0x9200 }."
+ ::= { genEquipEthernetSwitchCfg 4 }
+
+genEquipEthernetSwitchCfgJumboModeAdmin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This configuration defines the Ethernet Maximal Transmit Unit (MTU) size.
+ When jumbo mode is enabled, MTU=9612 bytes. When disabled, MTU=1632 bytes.
+ This configuration applies to all Ethernet traffic ports except management ports"
+ ::= { genEquipEthernetSwitchCfg 5 }
+
+
+-- Ethernet Switch xSTP
+genEquipEthernetSwitchXSTP OBJECT IDENTIFIER ::= {genEquipEthernetSwitch 2}
+
+genEquipEthernetSwitchXSTPProtocol OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0),
+ stp(1),
+ rstp(2),
+ ring-rstp(3),
+ mstp(4),
+ ring-mstp(5)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Selection of the xSTP protocol. Note that not all protocols may be available in all software releases"
+ ::= { genEquipEthernetSwitchXSTP 1 }
+
+-- Ethernet Switch RSTP family (Ring RSTP or RSTP)
+genEquipEthernetSwitchXSTPParams OBJECT IDENTIFIER ::= {genEquipEthernetSwitchXSTP 2}
+
+
+genEquipEthernetSwitchXSTPBridgeID OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The RSTP bridge ID"
+ ::= { genEquipEthernetSwitchXSTPParams 1 }
+
+genEquipEthernetSwitchXSTPRootID OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The RSTP root id."
+ ::= { genEquipEthernetSwitchXSTPParams 2 }
+
+genEquipEthernetSwitchXSTPRootPath OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The RSTP root path cost."
+ ::= { genEquipEthernetSwitchXSTPParams 3 }
+
+genEquipEthernetSwitchXSTPBridgeRole OBJECT-TYPE
+ SYNTAX INTEGER {
+ root-bridge(0),
+ designated-bridge(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The bridge role."
+ ::= { genEquipEthernetSwitchXSTPParams 4 }
+
+genEquipEthernetSwitchXSTPCfgPriority OBJECT-TYPE
+ SYNTAX INTEGER (0..61440)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "RSTP Bridge priority."
+ ::= { genEquipEthernetSwitchXSTPParams 5 }
+
+genEquipEthernetSwitchXSTPParamsEthernetPortsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipEthernetSwitchXSTPParamsEthernetPortsEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "RSTP port status table."
+ ::= { genEquipEthernetSwitchXSTPParams 6 }
+
+genEquipEthernetSwitchXSTPParamsEthernetPortsEntry OBJECT-TYPE
+ SYNTAX GenEquipEthernetSwitchXSTPParamsEthernetPortsEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "RSTP port status table."
+ INDEX { ifIndex }
+ ::= { genEquipEthernetSwitchXSTPParamsEthernetPortsTable 1 }
+
+GenEquipEthernetSwitchXSTPParamsEthernetPortsEntry ::=
+ SEQUENCE {
+ genEquipEthernetSwitchXSTPParamsEthernetPortsState
+ INTEGER,
+ genEquipEthernetSwitchXSTPParamsEthernetPortsRole
+ INTEGER,
+ genEquipEthernetSwitchXSTPParamsEthernetPortsPathCost
+ INTEGER,
+ genEquipEthernetSwitchXSTPParamsEthernetPortsPriority
+ INTEGER,
+ genEquipEthernetSwitchXSTPParamsEthernetDesPathCost
+ INTEGER,
+ genEquipEthernetSwitchXSTPParamsEthernetEdgePort
+ NoYes
+}
+
+genEquipEthernetSwitchXSTPParamsEthernetPortsState OBJECT-TYPE
+ SYNTAX INTEGER {
+ discarding(0),
+ listening(1),
+ learning(2),
+ forwarding(3),
+ blocking(4)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "RSTP port state."
+ ::= { genEquipEthernetSwitchXSTPParamsEthernetPortsEntry 1 }
+
+genEquipEthernetSwitchXSTPParamsEthernetPortsRole OBJECT-TYPE
+ SYNTAX INTEGER {
+ masterport(0),
+ alternate(1),
+ rootport(2),
+ designated(3),
+ disabled(4),
+ backup(5)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "RSTP port role."
+ ::= { genEquipEthernetSwitchXSTPParamsEthernetPortsEntry 2 }
+
+genEquipEthernetSwitchXSTPParamsEthernetPortsPathCost OBJECT-TYPE
+ SYNTAX INTEGER (1..200000000)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "RSTP configured path cost."
+ ::= { genEquipEthernetSwitchXSTPParamsEthernetPortsEntry 3 }
+
+genEquipEthernetSwitchXSTPParamsEthernetPortsPriority OBJECT-TYPE
+ SYNTAX INTEGER (0..240)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "RSTP configured port priority."
+ ::= { genEquipEthernetSwitchXSTPParamsEthernetPortsEntry 4 }
+
+genEquipEthernetSwitchXSTPParamsEthernetDesPathCost OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "RSTP designated path cost. This is the path cost to the root port from this local port."
+ ::= { genEquipEthernetSwitchXSTPParamsEthernetPortsEntry 5 }
+
+genEquipEthernetSwitchXSTPParamsEthernetEdgePort OBJECT-TYPE
+ SYNTAX NoYes
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This parameter indicates if the port is an Edge port or not."
+ ::= { genEquipEthernetSwitchXSTPParamsEthernetPortsEntry 6 }
+
+
+
+
+-- Ethernet Switch QoS & Rate Limiting
+genEquipEthernetSwitchQoS OBJECT IDENTIFIER ::= {genEquipEthernetSwitch 3}
+
+genEquipEthernetSwitchQoSTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipEthernetSwitchQoSEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "The switch application, QoS Table."
+ ::= { genEquipEthernetSwitchQoS 1 }
+
+genEquipEthernetSwitchQoSEntry OBJECT-TYPE
+ SYNTAX GenEquipEthernetSwitchQoSEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "The switch application, QoS Table, per Ethernet port based on ifIndex."
+ INDEX { ifIndex }
+ ::= { genEquipEthernetSwitchQoSTable 1 }
+
+GenEquipEthernetSwitchQoSEntry ::=
+ SEQUENCE {
+ genEquipEthernetSwitchQoSFirstCrit
+ INTEGER,
+ genEquipEthernetSwitchQoSSecondCrit
+ INTEGER,
+ genEquipEthernetSwitchQoSThirdCrit
+ INTEGER,
+ genEquipEthernetSwitchQoSDefClassification
+ INTEGER,
+ genEquipEthernetSwitchQoSEgressSched
+ INTEGER,
+ genEquipEthernetSwitchQoSEgressShaper
+ OffOn,
+ genEquipEthernetSwitchQoSEgressShaperRate
+ INTEGER,
+ genEquipEthernetSwitchQoSIngressPolicer
+ DisplayString
+}
+
+genEquipEthernetSwitchQoSFirstCrit OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0),
+ queueDecision(1),
+ pbitOverride(2),
+ queueAndPbitOverride(3)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "First classification criteria. This is the first criteria which will be evaluated for incoming frames.
+ queueDecision causes classification by defined static MAC address.
+ pbitOverride causes classification by pbits.
+ queueAndPbitOverridecauses classification by defined static MAC address, and changes the pbits accordingly."
+ ::= { genEquipEthernetSwitchQoSEntry 1 }
+
+genEquipEthernetSwitchQoSSecondCrit OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0),
+ queueDecision(1),
+ pbitOverride(2),
+ queueAndPbitOverride(3)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Second classification criteria. Applicable if match with first criteria is not found.
+ queueDecision causes classification by defined VLAN to queue mapping.
+ pbitOverride causes classification by pbits.
+ queueAndPbitOverrideclassification by defined VLAN to queue mapping, and changes the pbits accordingly."
+
+ ::= { genEquipEthernetSwitchQoSEntry 2 }
+
+genEquipEthernetSwitchQoSThirdCrit OBJECT-TYPE
+ SYNTAX INTEGER {
+ ipTosPriority(0),
+ vlanPbitspriority(1),
+ ipTosOverVlanPbitsPriority(2),
+ vlanPbitsOverIpTosPriority(3),
+ portPriority(4)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Third classification criteria. Applicable if match with first or second criteria is not found.
+ ipTosPriority causes classification by defined IP TOS to queue mapping only.
+ vlanPbitspriority causes classification by pbits only.
+ ipTosOverVlanPbitsPriority causes classification by IP TOS and then by pbits .
+ ipTosOverVlanPbitsPriority causes classification by pbits and then by IP TOS.
+ portPriority causes port-based classification according to port priority."
+ ::= { genEquipEthernetSwitchQoSEntry 3 }
+
+genEquipEthernetSwitchQoSDefClassification OBJECT-TYPE
+ SYNTAX INTEGER {
+ first(0),
+ second(1),
+ third(2),
+ fourth(3)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Default classification for frame that does suit to the previous classifications.
+ Choosing first will classify this frame as the first criteria for example."
+ ::= { genEquipEthernetSwitchQoSEntry 4 }
+
+genEquipEthernetSwitchQoSEgressSched OBJECT-TYPE
+ SYNTAX INTEGER {
+ allQueuesStrict(0),
+ fourthQueueStrict(1),
+ fourthThirdQueuesStrict(2),
+ allQueuesHrr(3)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Egress scheduler options."
+ ::= { genEquipEthernetSwitchQoSEntry 5 }
+
+genEquipEthernetSwitchQoSEgressShaper OBJECT-TYPE
+ SYNTAX OffOn
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Enable/Disable egress shaping."
+ ::= { genEquipEthernetSwitchQoSEntry 6 }
+
+genEquipEthernetSwitchQoSEgressShaperRate OBJECT-TYPE
+ SYNTAX INTEGER (64..1000000)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Egress shaper rate."
+ ::= { genEquipEthernetSwitchQoSEntry 7 }
+
+genEquipEthernetSwitchQoSIngressPolicer OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Ingress policer (rate limiting) name assiciated with this port.
+ The policer Name is defined in genEquipEthernetSwitchQoSPolicerNameName (in a table)"
+ ::= { genEquipEthernetSwitchQoSEntry 8 }
+
+
+-- VLAN Pbit Remap table
+genEquipEthernetSwitchVlanPbitRemapTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipEthernetSwitchVlanPbitRemapEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "VLAN priority bits remapping table."
+ ::= { genEquipEthernetSwitchQoS 2 }
+
+genEquipEthernetSwitchVlanPbitRemapEntry OBJECT-TYPE
+ SYNTAX GenEquipEthernetSwitchVlanPbitRemapEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "VLAN priority bits remap table."
+ INDEX { ifIndex, genEquipEthernetSwitchVlanPbitRemapPbit }
+ ::= { genEquipEthernetSwitchVlanPbitRemapTable 1 }
+
+GenEquipEthernetSwitchVlanPbitRemapEntry ::=
+ SEQUENCE {
+ genEquipEthernetSwitchVlanPbitRemapPbit
+ INTEGER,
+ genEquipEthernetSwitchVlanPbitRemapRemappedPbit
+ INTEGER
+}
+
+genEquipEthernetSwitchVlanPbitRemapPbit OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The ingress Pbit."
+ ::= { genEquipEthernetSwitchVlanPbitRemapEntry 1 }
+
+genEquipEthernetSwitchVlanPbitRemapRemappedPbit OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The remapped Pbit."
+ ::= { genEquipEthernetSwitchVlanPbitRemapEntry 2 }
+
+-- VLAN Id Queue
+genEquipEthernetSwitchQoSVLANIdToQueueTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipEthernetSwitchQoSVLANIdToQueueEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "VLAN Id to Queue mapping table."
+ ::= { genEquipEthernetSwitchQoS 3 }
+
+genEquipEthernetSwitchQoSVLANIdToQueueEntry OBJECT-TYPE
+ SYNTAX GenEquipEthernetSwitchQoSVLANIdToQueueEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "VLAN Id to Queue mapping table."
+ INDEX { genEquipEthernetSwitchCfgVIDIndex } -- list of all defined vlans (vlan index)
+ ::= { genEquipEthernetSwitchQoSVLANIdToQueueTable 1 }
+
+GenEquipEthernetSwitchQoSVLANIdToQueueEntry ::=
+ SEQUENCE {
+ genEquipEthernetSwitchQoSVLANIdToQueueQueue
+ QueueName
+}
+
+
+genEquipEthernetSwitchQoSVLANIdToQueueQueue OBJECT-TYPE
+ SYNTAX QueueName
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Queue for the vlan."
+ ::= { genEquipEthernetSwitchQoSVLANIdToQueueEntry 1 }
+
+
+-- LAG Defenitions
+genEquipEthernetSwitchLag OBJECT IDENTIFIER ::= {genEquipEthernetSwitch 4}
+
+genEquipEthernetSwitchLagDistFunction OBJECT-TYPE
+ SYNTAX INTEGER {
+ simple-xor(0),
+ hash(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "LAG distribution function. "
+ ::= { genEquipEthernetSwitchLag 1 }
+
+genEquipEthernetSwitchLagMaxNumber OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Max number of LAG port groups."
+ ::= { genEquipEthernetSwitchLag 2 }
+
+
+-- Traffic Managment Defenitions
+genEquipEthernetSwitchETM OBJECT IDENTIFIER ::= {genEquipEthernetSwitch 5}
+
+genEquipEthernetSwitchEtmAdmin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Enabling/Disabling the entire enhanced TM functionality."
+ ::= { genEquipEthernetSwitchETM 1 }
+
+genEquipEthernetSwitchEtmPTPOptimizedTransportModeAdmin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Precision Time Protocol low PDV channel admin Upon enabling all the packets classified to the 8th
+ queue will bypass the scheduler and will be sent directly to the Radio Frame.
+ Enabling this parameter will fail if Wayside is enabled."
+ ::= { genEquipEthernetSwitchETM 2 }
+
+genEquipEthernetSwitchEtmCountersClear OBJECT-TYPE
+ SYNTAX OffOn
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Reset selected module's counters."
+ ::= { genEquipEthernetSwitchETM 3 }
+
+genEquipEthernetSwitchEtmPTPOptimizedTransportMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ high-Cos-Queue-8(0),
+ ieee-1588(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "PTP optimized transport channel operation mode. In High-CoS-Queue-8 mode all the frames that will be classified
+ to the 8th queue in the traffic manager will be send to the PTP optimized transport channel.
+ In IEEE-1588 mode IEEE 1588 frames will be identified automatically based on UDP ports and/or ethertypes."
+ ::= { genEquipEthernetSwitchETM 4 }
+
+
+-- TM Packet classification tables and control parameters.
+genEquipEthernetSwitchEtmClassifier OBJECT IDENTIFIER ::= {genEquipEthernetSwitchETM 6}
+
+-- TM CoS classification by destination MAC address.
+genEquipEthernetSwitchEtmClassifierByMac OBJECT IDENTIFIER ::= {genEquipEthernetSwitchEtmClassifier 1}
+
+genEquipEthernetSwitchEtmClassifierByMacAdmin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Enabling/Disabling CoS and color classification by destination MAC addresses."
+ ::= { genEquipEthernetSwitchEtmClassifierByMac 1 }
+
+genEquipEthernetSwitchEtmClassifierByMacTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipEthernetSwitchEtmClassifierByMacEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table for CoS and color classification by destination MAC address."
+ ::= { genEquipEthernetSwitchEtmClassifierByMac 2 }
+
+genEquipEthernetSwitchEtmClassifierByMacEntry OBJECT-TYPE
+ SYNTAX GenEquipEthernetSwitchEtmClassifierByMacEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table for CoS and color classification by destination MAC address."
+ INDEX { genEquipEthernetSwitchEtmClassifierByMacIndex }
+ ::= { genEquipEthernetSwitchEtmClassifierByMacTable 1 }
+
+GenEquipEthernetSwitchEtmClassifierByMacEntry ::=
+ SEQUENCE {
+ genEquipEthernetSwitchEtmClassifierByMacIndex
+ INTEGER,
+ genEquipEthernetSwitchEtmClassifierByMacValue
+ OCTET STRING,
+ genEquipEthernetSwitchEtmClassifierByMacCos
+ INTEGER,
+ genEquipEthernetSwitchEtmClassifierByMacColor
+ GreenYellow,
+ genEquipEthernetSwitchEtmClassifierByMacRowStatus
+ RowStatus
+ }
+
+genEquipEthernetSwitchEtmClassifierByMacIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..16)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The index is pointing to a table entry. Each entry contains different MAC address."
+ ::= { genEquipEthernetSwitchEtmClassifierByMacEntry 1 }
+
+genEquipEthernetSwitchEtmClassifierByMacValue OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..6))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "MAC Address value for CoS Classification by MAC Table Entry."
+ ::= { genEquipEthernetSwitchEtmClassifierByMacEntry 2 }
+
+genEquipEthernetSwitchEtmClassifierByMacCos OBJECT-TYPE
+ SYNTAX INTEGER (0..7)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "CoS value for CoS Classification by MAC Table Entry."
+ ::= { genEquipEthernetSwitchEtmClassifierByMacEntry 3 }
+
+genEquipEthernetSwitchEtmClassifierByMacColor OBJECT-TYPE
+ SYNTAX GreenYellow
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Color value for CoS Classification by MAC Table Entry."
+ ::= { genEquipEthernetSwitchEtmClassifierByMacEntry 4 }
+
+genEquipEthernetSwitchEtmClassifierByMacRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Row Status for this table."
+ ::= { genEquipEthernetSwitchEtmClassifierByMacEntry 30 }
+
+
+-- TM CoS classification by UDP port.
+genEquipEthernetSwitchEtmClassifierByUdpPort OBJECT IDENTIFIER ::= {genEquipEthernetSwitchEtmClassifier 2}
+
+genEquipEthernetSwitchEtmClassifierByUdpPortAdmin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Enabling/Disabling CoS and color classification by UDP source and/or destination ports."
+ ::= { genEquipEthernetSwitchEtmClassifierByUdpPort 1 }
+
+genEquipEthernetSwitchEtmClassifierByUdpPortTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipEthernetSwitchEtmClassifierByUdpPortEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table for CoS and color classification by UDP ports. Classification may be based on source port,
+ dest port ,or both - use validity parameter."
+ ::= { genEquipEthernetSwitchEtmClassifierByUdpPort 2 }
+
+genEquipEthernetSwitchEtmClassifierByUdpPortEntry OBJECT-TYPE
+ SYNTAX GenEquipEthernetSwitchEtmClassifierByUdpPortEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Entry for CoS and color classification by UDP ports. Classification may be based on source port,
+ dest port ,or both - use validity parameter."
+ INDEX { genEquipEthernetSwitchEtmClassifierByUdpPortIndex }
+ ::= { genEquipEthernetSwitchEtmClassifierByUdpPortTable 1 }
+
+GenEquipEthernetSwitchEtmClassifierByUdpPortEntry ::=
+ SEQUENCE {
+ genEquipEthernetSwitchEtmClassifierByUdpPortIndex
+ INTEGER,
+ genEquipEthernetSwitchEtmClassifierByUdpPortSrcPort
+ INTEGER,
+ genEquipEthernetSwitchEtmClassifierByUdpPortDestPort
+ INTEGER,
+ genEquipEthernetSwitchEtmClassifierByUdpPortCos
+ INTEGER,
+ genEquipEthernetSwitchEtmClassifierByUdpPortColor
+ GreenYellow,
+ genEquipEthernetSwitchEtmClassifierByUdpPortValidity
+ INTEGER,
+ genEquipEthernetSwitchEtmClassifierByUdpPortRowStatus
+ RowStatus
+}
+
+genEquipEthernetSwitchEtmClassifierByUdpPortIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..8)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The index is pointing to a table entry. Each entry contains different UDP source and destination ports."
+ ::= { genEquipEthernetSwitchEtmClassifierByUdpPortEntry 1 }
+
+genEquipEthernetSwitchEtmClassifierByUdpPortSrcPort OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "UDP source port value for CoS Classification by UDP ports Table Entry."
+ ::= { genEquipEthernetSwitchEtmClassifierByUdpPortEntry 2 }
+
+genEquipEthernetSwitchEtmClassifierByUdpPortDestPort OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "UDP dest. port value for CoS Classification by UDP ports Table Entry."
+ ::= { genEquipEthernetSwitchEtmClassifierByUdpPortEntry 3 }
+
+genEquipEthernetSwitchEtmClassifierByUdpPortCos OBJECT-TYPE
+ SYNTAX INTEGER (0..7)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "CoS value for CoS Classification by UDP Ports Table Entry."
+ ::= { genEquipEthernetSwitchEtmClassifierByUdpPortEntry 4 }
+
+genEquipEthernetSwitchEtmClassifierByUdpPortColor OBJECT-TYPE
+ SYNTAX GreenYellow
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Color value for CoS Classification by UDP ports Table Entry."
+ ::= { genEquipEthernetSwitchEtmClassifierByUdpPortEntry 5 }
+
+genEquipEthernetSwitchEtmClassifierByUdpPortValidity OBJECT-TYPE
+ SYNTAX INTEGER {
+ unused(0),
+ src(1),
+ dest(2),
+ both(3)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Validity value for CoS Classification by UDP ports Table Entry."
+ ::= { genEquipEthernetSwitchEtmClassifierByUdpPortEntry 6 }
+
+genEquipEthernetSwitchEtmClassifierByUdpPortRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Row Status for this table."
+ ::= { genEquipEthernetSwitchEtmClassifierByUdpPortEntry 30 }
+
+-- TM CoS classification by Ethertypes.
+-- genEquipEthernetSwitchEtmClassifierByEthertypes OBJECT IDENTIFIER ::= {genEquipEthernetSwitchEtmClassifier 3}
+--
+-- genEquipEthernetSwitchEtmClassifierByEthertypesAdmin OBJECT-TYPE
+-- SYNTAX EnableDisable
+-- ACCESS read-write
+-- STATUS mandatory
+-- DESCRIPTION
+-- "Enabling/Disabling CoS and color classification by Ethertypes."
+-- ::= { genEquipEthernetSwitchEtmClassifierByEthertypes 1 }
+--
+-- genEquipEthernetSwitchEtmClassifierByEthertypesTable OBJECT-TYPE
+-- SYNTAX SEQUENCE OF GenEquipEthernetSwitchEtmClassifierByEthertypesEntry
+-- ACCESS not-accessible
+-- STATUS mandatory
+-- DESCRIPTION
+-- "Table for CoS and color classification by Ethertype."
+-- ::= { genEquipEthernetSwitchEtmClassifierByEthertypes 2 }
+--
+-- genEquipEthernetSwitchEtmClassifierByEthertypesEntry OBJECT-TYPE
+-- SYNTAX GenEquipEthernetSwitchEtmClassifierByEthertypesEntry
+-- ACCESS not-accessible
+-- STATUS mandatory
+-- DESCRIPTION
+-- "Table entry for CoS and color classification by Ethertype."
+-- INDEX { genEquipEthernetSwitchEtmClassifierByEthertypesIndex }
+-- ::= { genEquipEthernetSwitchEtmClassifierByEthertypesTable 1 }
+--
+-- GenEquipEthernetSwitchEtmClassifierByEthertypesEntry ::=
+-- SEQUENCE {
+-- genEquipEthernetSwitchEtmClassifierByEthertypesIndex
+-- INTEGER,
+-- genEquipEthernetSwitchEtmClassifierByEthertypesValue
+-- INTEGER,
+-- genEquipEthernetSwitchEtmClassifierByEthertypesCos
+-- INTEGER,
+-- genEquipEthernetSwitchEtmClassifierByEthertypesColor
+-- GreenYellow,
+-- genEquipEthernetSwitchEtmClassifierByEthertypesRowStatus
+-- RowStatus
+-- }
+--
+-- genEquipEthernetSwitchEtmClassifierByEthertypesIndex OBJECT-TYPE
+-- SYNTAX INTEGER (1..16)
+-- ACCESS read-only
+-- STATUS mandatory
+-- DESCRIPTION
+-- "The index is pointing to a table entry. Each entry contains different Ethertype value."
+-- ::= { genEquipEthernetSwitchEtmClassifierByEthertypesEntry 1 }
+--
+-- genEquipEthernetSwitchEtmClassifierByEthertypesValue OBJECT-TYPE
+-- SYNTAX INTEGER
+-- ACCESS read-write
+-- STATUS mandatory
+-- DESCRIPTION
+-- "Ethertype tag value for CoS Classification by Ethertype Table Entry."
+-- ::= { genEquipEthernetSwitchEtmClassifierByEthertypesEntry 2 }
+--
+-- genEquipEthernetSwitchEtmClassifierByEthertypesCos OBJECT-TYPE
+-- SYNTAX INTEGER (0..7)
+-- ACCESS read-write
+-- STATUS mandatory
+-- DESCRIPTION
+-- "CoS value for CoS Classification by Ethertype Table Entry."
+-- ::= { genEquipEthernetSwitchEtmClassifierByEthertypesEntry 3 }
+--
+-- genEquipEthernetSwitchEtmClassifierByEthertypesColor OBJECT-TYPE
+-- SYNTAX GreenYellow
+-- ACCESS read-write
+-- STATUS mandatory
+-- DESCRIPTION
+-- "Color value for CoS Classification by Ethertype Table Entry."
+-- ::= { genEquipEthernetSwitchEtmClassifierByEthertypesEntry 4 }
+--
+-- genEquipEthernetSwitchEtmClassifierByEthertypesRowStatus OBJECT-TYPE
+-- SYNTAX RowStatus
+-- ACCESS read-write
+-- STATUS mandatory
+-- DESCRIPTION
+-- "Row Status for this table."
+-- ::= { genEquipEthernetSwitchEtmClassifierByEthertypesEntry 30 }
+--
+-- TM CoS classification by Known PDU MAC addresses.
+genEquipEthernetSwitchEtmClassifierByKnownPduMac OBJECT IDENTIFIER ::= {genEquipEthernetSwitchEtmClassifier 4}
+
+genEquipEthernetSwitchEtmClassifierByKnownPduMacAdmin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Enabling/Disabling CoS and color classification by known PDU MAC addresses."
+ ::= { genEquipEthernetSwitchEtmClassifierByKnownPduMac 1 }
+
+genEquipEthernetSwitchEtmClassifierByKnownPduMacTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipEthernetSwitchEtmClassifierByKnownPduMacEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table for CoS and color classification by known PDU MAC addresses."
+ ::= { genEquipEthernetSwitchEtmClassifierByKnownPduMac 2 }
+
+genEquipEthernetSwitchEtmClassifierByKnownPduMacEntry OBJECT-TYPE
+ SYNTAX GenEquipEthernetSwitchEtmClassifierByKnownPduMacEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table entry for CoS and color classification by known PDU MAC addresses."
+ INDEX { genEquipEthernetSwitchEtmClassifierByKnownPduMacIndex }
+ ::= { genEquipEthernetSwitchEtmClassifierByKnownPduMacTable 1 }
+
+GenEquipEthernetSwitchEtmClassifierByKnownPduMacEntry ::=
+ SEQUENCE {
+ genEquipEthernetSwitchEtmClassifierByKnownPduMacIndex
+ INTEGER,
+ genEquipEthernetSwitchEtmClassifierByKnownPduMacAddress
+ OCTET STRING,
+ genEquipEthernetSwitchEtmClassifierByKnownPduMacCos
+ INTEGER,
+ genEquipEthernetSwitchEtmClassifierByKnownPduMacColor
+ GreenYellow,
+ genEquipEthernetSwitchEtmClassifierByKnownPduMacValidity
+ EnableDisable
+ }
+
+genEquipEthernetSwitchEtmClassifierByKnownPduMacIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..66)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The index is pointing to a table entry. Each entry contains different PDU MAC address value."
+ ::= { genEquipEthernetSwitchEtmClassifierByKnownPduMacEntry 1 }
+
+genEquipEthernetSwitchEtmClassifierByKnownPduMacAddress OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(6))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "CoS value for MAC address Classification by known PDU Table Entry."
+ ::= { genEquipEthernetSwitchEtmClassifierByKnownPduMacEntry 2 }
+
+genEquipEthernetSwitchEtmClassifierByKnownPduMacCos OBJECT-TYPE
+ SYNTAX INTEGER (0..7)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "CoS value for CoS Classification by known PDU Table Entry."
+ ::= { genEquipEthernetSwitchEtmClassifierByKnownPduMacEntry 3 }
+
+genEquipEthernetSwitchEtmClassifierByKnownPduMacColor OBJECT-TYPE
+ SYNTAX GreenYellow
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Color value for CoS Classification by known PDU Table Entry."
+ ::= { genEquipEthernetSwitchEtmClassifierByKnownPduMacEntry 4 }
+
+genEquipEthernetSwitchEtmClassifierByKnownPduMacValidity OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Validity value for Cos Classification by known PDU Table Entry."
+ ::= { genEquipEthernetSwitchEtmClassifierByKnownPduMacEntry 5 }
+
+
+-- TM CoS classification by Service.
+genEquipEthernetSwitchEtmClassifierByService OBJECT IDENTIFIER ::= {genEquipEthernetSwitchEtmClassifier 5}
+
+genEquipEthernetSwitchEtmClassifierByServiceAdmin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Enabling/Disabling CoS and color classification by service IDs."
+ ::= { genEquipEthernetSwitchEtmClassifierByService 1 }
+
+genEquipEthernetSwitchEtmClassifierByServiceTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipEthernetSwitchEtmClassifierByServiceEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table for CoS and color classification by service-ids."
+ ::= { genEquipEthernetSwitchEtmClassifierByService 2 }
+
+genEquipEthernetSwitchEtmClassifierByServiceEntry OBJECT-TYPE
+ SYNTAX GenEquipEthernetSwitchEtmClassifierByServiceEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table entry for CoS and color classification by service-ids."
+ INDEX { genEquipEthernetSwitchEtmClassifierByServiceIndex }
+ ::= { genEquipEthernetSwitchEtmClassifierByServiceTable 1 }
+
+GenEquipEthernetSwitchEtmClassifierByServiceEntry ::=
+ SEQUENCE {
+ genEquipEthernetSwitchEtmClassifierByServiceIndex
+ INTEGER,
+ genEquipEthernetSwitchEtmClassifierByServiceCos
+ INTEGER,
+ genEquipEthernetSwitchEtmClassifierByServiceColor
+ GreenYellow,
+ genEquipEthernetSwitchEtmClassifierByServiceUsage
+ EnableDisable
+ }
+
+genEquipEthernetSwitchEtmClassifierByServiceIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..256)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The index is pointing to a table entry. Each entry contains a mapping of service-id to CoS."
+ ::= { genEquipEthernetSwitchEtmClassifierByServiceEntry 1 }
+
+genEquipEthernetSwitchEtmClassifierByServiceCos OBJECT-TYPE
+ SYNTAX INTEGER (0..7)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "CoS value for CoS serviceID Mapping Table Entry."
+ ::= { genEquipEthernetSwitchEtmClassifierByServiceEntry 2 }
+
+genEquipEthernetSwitchEtmClassifierByServiceColor OBJECT-TYPE
+ SYNTAX GreenYellow
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Color value for CoS serviceId Mapping Table Entry."
+ ::= { genEquipEthernetSwitchEtmClassifierByServiceEntry 3 }
+
+genEquipEthernetSwitchEtmClassifierByServiceUsage OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Validity value for CoS serviceID Mapping Table Entry."
+ ::= { genEquipEthernetSwitchEtmClassifierByServiceEntry 4 }
+
+-- TM CoS classification by VLAN P-bits.
+genEquipEthernetSwitchEtmClassifierByVlanPbits OBJECT IDENTIFIER ::= {genEquipEthernetSwitchEtmClassifier 6}
+
+genEquipEthernetSwitchEtmClassifierByVlanPbitsAdmin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Enabling/Disabling CoS and color classification by VLAN P-bits and CFI/DEI bit."
+ ::= { genEquipEthernetSwitchEtmClassifierByVlanPbits 1 }
+
+-- Vlan table
+genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipEthernetSwitchEtmClassifierByVlanPbitsVlanEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table for CoS and color classification by VLAN S-tag P-bits and DEI bit."
+ ::= { genEquipEthernetSwitchEtmClassifierByVlanPbits 2 }
+
+genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanEntry OBJECT-TYPE
+ SYNTAX GenEquipEthernetSwitchEtmClassifierByVlanPbitsVlanEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table entry for CoS and color classification by VLAN S-tag P-bits and DEI bit."
+ INDEX { genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanIndex }
+ ::= { genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanTable 1 }
+
+GenEquipEthernetSwitchEtmClassifierByVlanPbitsVlanEntry ::=
+ SEQUENCE {
+ genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanIndex
+ INTEGER,
+ genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanPriority
+ INTEGER,
+ genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanDei
+ INTEGER,
+ genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanCos
+ INTEGER,
+ genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanColor
+ GreenYellow
+ }
+
+genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Pbit vlan index to table."
+ ::= { genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanEntry 1 }
+
+genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanPriority OBJECT-TYPE
+ SYNTAX INTEGER (0..7)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Pbit value for regular classification prioritization."
+ ::= { genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanEntry 2 }
+
+genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanDei OBJECT-TYPE
+ SYNTAX INTEGER (0..1)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "DEI value for regular classification prioritization by S-tag vlan."
+ ::= { genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanEntry 3 }
+
+genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanCos OBJECT-TYPE
+ SYNTAX INTEGER (0..7)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "CoS value for regular classification prioritization by S-tag VLAN."
+ ::= { genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanEntry 4 }
+
+genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanColor OBJECT-TYPE
+ SYNTAX GreenYellow
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Color value for regular classification prioritization by S-tag VLAN."
+ ::= { genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanEntry 5 }
+
+-- TM CoS classification by IP DSCP bits.
+genEquipEthernetSwitchEtmClassifierByDscp OBJECT IDENTIFIER ::= {genEquipEthernetSwitchEtmClassifier 7}
+
+genEquipEthernetSwitchEtmClassifierByDscpAdmin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Enabling/Disabling Cos and color classification by DSCP/TOS bits."
+ ::= { genEquipEthernetSwitchEtmClassifierByDscp 1 }
+
+genEquipEthernetSwitchEtmClassifierByDscpTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipEthernetSwitchEtmClassifierByDscpEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table for CoS and color classification by DSCP/TOS bits."
+ ::= { genEquipEthernetSwitchEtmClassifierByDscp 2 }
+
+genEquipEthernetSwitchEtmClassifierByDscpEntry OBJECT-TYPE
+ SYNTAX GenEquipEthernetSwitchEtmClassifierByDscpEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table entry for CoS and color classification by DSCP/TOS bits."
+ INDEX { genEquipEthernetSwitchEtmClassifierByDscpValue }
+ ::= { genEquipEthernetSwitchEtmClassifierByDscpTable 1 }
+
+GenEquipEthernetSwitchEtmClassifierByDscpEntry ::=
+ SEQUENCE {
+ genEquipEthernetSwitchEtmClassifierByDscpValue
+ INTEGER,
+ genEquipEthernetSwitchEtmClassifierByDscpCos
+ INTEGER,
+ genEquipEthernetSwitchEtmClassifierByDscpColor
+ GreenYellow
+ }
+
+genEquipEthernetSwitchEtmClassifierByDscpValue OBJECT-TYPE
+ SYNTAX INTEGER (0..63)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The index is pointing to a table entry. Each entry contains different DSCP/TOS bits mapping."
+ ::= { genEquipEthernetSwitchEtmClassifierByDscpEntry 1 }
+
+genEquipEthernetSwitchEtmClassifierByDscpCos OBJECT-TYPE
+ SYNTAX INTEGER (0..7)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "CoS value for regular classification prioritization by DSCP-tag."
+ ::= { genEquipEthernetSwitchEtmClassifierByDscpEntry 2 }
+
+genEquipEthernetSwitchEtmClassifierByDscpColor OBJECT-TYPE
+ SYNTAX GreenYellow
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Color value for regular classification prioritization by MPLS."
+ ::= { genEquipEthernetSwitchEtmClassifierByDscpEntry 3 }
+
+-- TM CoS classification by MPLS experimental bits.
+genEquipEthernetSwitchEtmClassifierByMplsExp OBJECT IDENTIFIER ::= {genEquipEthernetSwitchEtmClassifier 8}
+
+genEquipEthernetSwitchEtmClassifierByMplsExpAdmin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Enabling/Disabling CoS and color classification by MPLS experimantal bits."
+ ::= { genEquipEthernetSwitchEtmClassifierByMplsExp 1 }
+
+genEquipEthernetSwitchEtmClassifierByMplsExpTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipEthernetSwitchEtmClassifierByMplsExpEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table for CoS and color classification by MPLS experimental bits."
+ ::= { genEquipEthernetSwitchEtmClassifierByMplsExp 2 }
+
+genEquipEthernetSwitchEtmClassifierByMplsExpEntry OBJECT-TYPE
+ SYNTAX GenEquipEthernetSwitchEtmClassifierByMplsExpEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table entry for CoS and color classification by MPLS experimental bits."
+ INDEX { genEquipEthernetSwitchEtmClassifierByMplsExpValue }
+ ::= { genEquipEthernetSwitchEtmClassifierByMplsExpTable 1 }
+
+GenEquipEthernetSwitchEtmClassifierByMplsExpEntry ::=
+ SEQUENCE {
+ genEquipEthernetSwitchEtmClassifierByMplsExpValue
+ INTEGER,
+ genEquipEthernetSwitchEtmClassifierByMplsExpCos
+ INTEGER,
+ genEquipEthernetSwitchEtmClassifierByMplsExpColor
+ GreenYellow
+ }
+
+genEquipEthernetSwitchEtmClassifierByMplsExpValue OBJECT-TYPE
+ SYNTAX INTEGER (0..7)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The index is pointing to a table entry. Each entry contains different MPLS experimantal bits mapping."
+ ::= { genEquipEthernetSwitchEtmClassifierByMplsExpEntry 1 }
+
+genEquipEthernetSwitchEtmClassifierByMplsExpCos OBJECT-TYPE
+ SYNTAX INTEGER (0..7)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "value for regular classification prioritization by MPLS."
+ ::= { genEquipEthernetSwitchEtmClassifierByMplsExpEntry 2 }
+
+genEquipEthernetSwitchEtmClassifierByMplsExpColor OBJECT-TYPE
+ SYNTAX GreenYellow
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Color value for regular classification prioritization by MPLS."
+ ::= { genEquipEthernetSwitchEtmClassifierByMplsExpEntry 3 }
+
+-- TM CoS default color defs.
+genEquipEthernetSwitchEtmClassifierByDefaultCosColor OBJECT IDENTIFIER ::= {genEquipEthernetSwitchEtmClassifier 9}
+
+genEquipEthernetSwitchEtmClassifierByDefaultCos OBJECT-TYPE
+ SYNTAX INTEGER (0..7)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "CoS value for regular classification prioritization by default port."
+ ::= { genEquipEthernetSwitchEtmClassifierByDefaultCosColor 1 }
+
+genEquipEthernetSwitchEtmClassifierByDefaultColor OBJECT-TYPE
+ SYNTAX GreenYellow
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Table for regular priority by default port mapping table."
+ ::= { genEquipEthernetSwitchEtmClassifierByDefaultCosColor 2 }
+
+-- TM CoS classification by Cos To Queue
+genEquipEthernetSwitchEtmClassifierByCosToQueue OBJECT IDENTIFIER ::= {genEquipEthernetSwitchEtmClassifier 10}
+
+genEquipEthernetSwitchEtmClassifierByCosToQueueTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipEthernetSwitchEtmClassifierByCosToQueueEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table for VLAN to FlowId mapping ."
+ ::= { genEquipEthernetSwitchEtmClassifierByCosToQueue 1 }
+
+genEquipEthernetSwitchEtmClassifierByCosToQueueEntry OBJECT-TYPE
+ SYNTAX GenEquipEthernetSwitchEtmClassifierByCosToQueueEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table for VLAN to FlowId mapping ."
+ INDEX { genEquipEthernetSwitchEtmClassifierByCosToQueueIndex }
+ ::= { genEquipEthernetSwitchEtmClassifierByCosToQueueTable 1 }
+
+GenEquipEthernetSwitchEtmClassifierByCosToQueueEntry ::=
+ SEQUENCE {
+ genEquipEthernetSwitchEtmClassifierByCosToQueueIndex
+ INTEGER,
+ genEquipEthernetSwitchEtmClassifierByCosToQueueValue
+ INTEGER
+ }
+
+genEquipEthernetSwitchEtmClassifierByCosToQueueIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The index is pointing to a table entry. Each entry contains a mapping of a different CoS to a queue."
+ ::= { genEquipEthernetSwitchEtmClassifierByCosToQueueEntry 1 }
+
+genEquipEthernetSwitchEtmClassifierByCosToQueueValue OBJECT-TYPE
+ SYNTAX INTEGER (1..8)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Queue index for CoS to Queue Mapping Table Entry."
+ ::= { genEquipEthernetSwitchEtmClassifierByCosToQueueEntry 2 }
+
+-- TM CoS classification by Vlan to Service
+genEquipEthernetSwitchEtmClassifierVlanidToService OBJECT IDENTIFIER ::= {genEquipEthernetSwitchEtmClassifier 11}
+
+genEquipEthernetSwitchEtmClassifierVlanidToServiceTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipEthernetSwitchEtmClassifierVlanidToServiceEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table for VLAN to Vlan To Servies mapping ."
+ ::= { genEquipEthernetSwitchEtmClassifierVlanidToService 1 }
+
+genEquipEthernetSwitchEtmClassifierVlanidToServiceEntry OBJECT-TYPE
+ SYNTAX GenEquipEthernetSwitchEtmClassifierVlanidToServiceEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table for VLAN to Vlan To Servies mapping ."
+ INDEX { genEquipEthernetSwitchEtmClassifierByServiceVlanidToServiceIndex }
+ ::= { genEquipEthernetSwitchEtmClassifierVlanidToServiceTable 1 }
+
+GenEquipEthernetSwitchEtmClassifierVlanidToServiceEntry ::=
+ SEQUENCE {
+ genEquipEthernetSwitchEtmClassifierByServiceVlanidToServiceIndex
+ INTEGER,
+ genEquipEthernetSwitchEtmClassifierByFlowsVlanidToServiceValue
+ INTEGER
+ }
+
+genEquipEthernetSwitchEtmClassifierByServiceVlanidToServiceIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The index is pointing to a table entry. Each entry contains a mapping of a different CoS to a queue."
+ ::= { genEquipEthernetSwitchEtmClassifierVlanidToServiceEntry 1 }
+
+genEquipEthernetSwitchEtmClassifierByFlowsVlanidToServiceValue OBJECT-TYPE
+ SYNTAX INTEGER (1..256)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Service ID."
+ ::= { genEquipEthernetSwitchEtmClassifierVlanidToServiceEntry 2 }
+
+
+
+-- TM Classifier Inband Managment Qos
+-- Cos and Color classification by VLAN-ID. Only a single VLAN-ID value can be specified.
+-- This is configuration should be used for inband management VLAN-ID classification to the high priority queue.
+genEquipEthernetSwitchEtmClassifierInbandMgmtQoS OBJECT IDENTIFIER ::= {genEquipEthernetSwitchEtmClassifier 12}
+
+genEquipEthernetSwitchEtmClassifierInbandMgmtAdmin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Enabling/Disabling CoS and Color classification by VLAN ID."
+ ::= { genEquipEthernetSwitchEtmClassifierInbandMgmtQoS 1 }
+
+genEquipEthernetSwitchEtmClassifierInbandMgmtVlanId OBJECT-TYPE
+ SYNTAX INTEGER (0..4090)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Inband Management vlan id. This parameter should be the same as genEquipEthernetSwitchEtmClassifierInbandMgmtVlanId."
+ ::= { genEquipEthernetSwitchEtmClassifierInbandMgmtQoS 2 }
+
+genEquipEthernetSwitchEtmClassifierInbandMgmtCos OBJECT-TYPE
+ SYNTAX INTEGER (0..7)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Class of Service. Allowed values: [0-7]."
+ ::= { genEquipEthernetSwitchEtmClassifierInbandMgmtQoS 3 }
+
+genEquipEthernetSwitchEtmClassifierInbandMgmtColor OBJECT-TYPE
+ SYNTAX GreenYellow
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Color 1=green ; 0=yellow."
+ ::= { genEquipEthernetSwitchEtmClassifierInbandMgmtQoS 4 }
+
+
+-- TM ACM drop per queue paramters.
+--genEquipEthernetSwitchEtmAcmDropPerQueue OBJECT IDENTIFIER ::= {genEquipEthernetSwitchETM 7}
+
+-- TM Policers configuration and mapping tables and parameters
+genEquipEthernetSwitchEtmPolicers OBJECT IDENTIFIER ::= {genEquipEthernetSwitchETM 8}
+
+genEquipEthernetSwitchEtmPolicerModuleAdmin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Enabling/Disabling Policing."
+ ::= { genEquipEthernetSwitchEtmPolicers 1 }
+
+-- Table of Service to Policeer mapping
+genEquipEthernetSwitchEtmServiceToPolicerTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipEthernetSwitchEtmServiceToPolicerEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of Service to Policeer mapping."
+ ::= { genEquipEthernetSwitchEtmPolicers 2 }
+
+genEquipEthernetSwitchEtmServiceToPolicerEntry OBJECT-TYPE
+ SYNTAX GenEquipEthernetSwitchEtmServiceToPolicerEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of Service to Policeer mapping."
+ INDEX { genEquipEthernetSwitchEtmServiceToPolicerIndex }
+ ::= { genEquipEthernetSwitchEtmServiceToPolicerTable 1 }
+
+GenEquipEthernetSwitchEtmServiceToPolicerEntry ::=
+ SEQUENCE {
+ genEquipEthernetSwitchEtmServiceToPolicerIndex
+ INTEGER,
+ genEquipEthernetSwitchEtmServiceToPolicerValue
+ INTEGER,
+ genEquipEthernetSwitchEtmServiceToPolicerPerCosOption
+ EnableDisable
+ }
+
+genEquipEthernetSwitchEtmServiceToPolicerIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..256)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Service Index."
+ ::= { genEquipEthernetSwitchEtmServiceToPolicerEntry 1 }
+
+genEquipEthernetSwitchEtmServiceToPolicerValue OBJECT-TYPE
+ SYNTAX INTEGER (1..256)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Policer to be used for the specific Service."
+ ::= { genEquipEthernetSwitchEtmServiceToPolicerEntry 2 }
+
+genEquipEthernetSwitchEtmServiceToPolicerPerCosOption OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Policer per CoS option. If enabled, each Service will be mapped to 8 policers while each policer will be used
+ for a different CoS value. This option can be used only for the pilicers with indeces of multiple of 8. i.e 8,16,24,32,240,248."
+ ::= { genEquipEthernetSwitchEtmServiceToPolicerEntry 3 }
+
+
+-- Table of Policers configuration
+genEquipEthernetSwitchEtmPolicerConfigTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipEthernetSwitchEtmPolicerConfigEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of Policers configuration."
+ ::= { genEquipEthernetSwitchEtmPolicers 3 }
+
+genEquipEthernetSwitchEtmPolicerConfigEntry OBJECT-TYPE
+ SYNTAX GenEquipEthernetSwitchEtmPolicerConfigEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of Policers configuration."
+ INDEX { genEquipEthernetSwitchEtmPolicerConfigIndex }
+ ::= { genEquipEthernetSwitchEtmPolicerConfigTable 1 }
+
+GenEquipEthernetSwitchEtmPolicerConfigEntry ::=
+ SEQUENCE {
+ genEquipEthernetSwitchEtmPolicerConfigIndex
+ INTEGER,
+ genEquipEthernetSwitchEtmPolicerConfigAdmin
+ EnableDisable,
+ genEquipEthernetSwitchEtmPolicerConfigColorAware
+ EnableDisable,
+ genEquipEthernetSwitchEtmPolicerConfigCir
+ INTEGER,
+ genEquipEthernetSwitchEtmPolicerConfigCbs
+ INTEGER,
+ genEquipEthernetSwitchEtmPolicerConfigEir
+ INTEGER,
+ genEquipEthernetSwitchEtmPolicerConfigEbs
+ INTEGER,
+ genEquipEthernetSwitchEtmPolicerConfigCoupling
+ EnableDisable,
+ genEquipEthernetSwitchEtmPolicerConfigLineComp
+ INTEGER
+ }
+
+genEquipEthernetSwitchEtmPolicerConfigIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..256)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Service Index."
+ ::= { genEquipEthernetSwitchEtmPolicerConfigEntry 1 }
+
+genEquipEthernetSwitchEtmPolicerConfigAdmin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Egress policer admin disables/enables the policing feature per policer.
+ If not enabled, the policer is in bypass mode (no rate limiting)."
+ ::= { genEquipEthernetSwitchEtmPolicerConfigEntry 2 }
+
+genEquipEthernetSwitchEtmPolicerConfigColorAware OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Whether policer is color aware."
+ ::= { genEquipEthernetSwitchEtmPolicerConfigEntry 3 }
+
+genEquipEthernetSwitchEtmPolicerConfigCir OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Egress policer CIR value - the committed rate user requests."
+ ::= { genEquipEthernetSwitchEtmPolicerConfigEntry 4 }
+
+genEquipEthernetSwitchEtmPolicerConfigCbs OBJECT-TYPE
+ SYNTAX INTEGER (1..128)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Egress policer committed burst size value."
+ ::= { genEquipEthernetSwitchEtmPolicerConfigEntry 5 }
+
+genEquipEthernetSwitchEtmPolicerConfigEir OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Egress policer EIR value - the excess rate user requests."
+ ::= { genEquipEthernetSwitchEtmPolicerConfigEntry 6 }
+
+genEquipEthernetSwitchEtmPolicerConfigEbs OBJECT-TYPE
+ SYNTAX INTEGER (1..128)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Egress policer excess burst size value (bytes)."
+ ::= { genEquipEthernetSwitchEtmPolicerConfigEntry 7 }
+
+genEquipEthernetSwitchEtmPolicerConfigCoupling OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Egress policer coupling mode."
+ ::= { genEquipEthernetSwitchEtmPolicerConfigEntry 8 }
+
+genEquipEthernetSwitchEtmPolicerConfigLineComp OBJECT-TYPE
+ SYNTAX INTEGER (0..255)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Egress policer line compensation value (bytes)."
+ ::= { genEquipEthernetSwitchEtmPolicerConfigEntry 9 }
+
+
+
+-- TM Queues configuration
+genEquipEthernetSwitchEtmQueues OBJECT IDENTIFIER ::= {genEquipEthernetSwitchETM 9}
+
+genEquipEthernetSwitchEtmQueuesTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipEthernetSwitchEtmQueuesEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of queue sizes."
+ ::= { genEquipEthernetSwitchEtmQueues 1 }
+
+genEquipEthernetSwitchEtmQueuesEntry OBJECT-TYPE
+ SYNTAX GenEquipEthernetSwitchEtmQueuesEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table entry of queue sizes."
+ INDEX { genEquipEthernetSwitchEtmQueuesIndex }
+ ::= { genEquipEthernetSwitchEtmQueuesTable 1 }
+
+GenEquipEthernetSwitchEtmQueuesEntry ::=
+ SEQUENCE {
+ genEquipEthernetSwitchEtmQueuesIndex
+ INTEGER,
+ genEquipEthernetSwitchEtmQueuesSize
+ INTEGER
+ }
+
+genEquipEthernetSwitchEtmQueuesIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..8)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The Index to a queue."
+ ::= { genEquipEthernetSwitchEtmQueuesEntry 1 }
+
+genEquipEthernetSwitchEtmQueuesSize OBJECT-TYPE
+ SYNTAX INTEGER {
+ kbit-0(0),
+ kbit-500(1),
+ kbit-1000(2),
+ kbit-2000(3),
+ kbit-4000(4),
+ kbit-250(5),
+ kbit-3000(6),
+ kbit-3500(7)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Size of queue[i]"
+ ::= { genEquipEthernetSwitchEtmQueuesEntry 2 }
+
+-- TM WRED configuration
+genEquipEthernetSwitchEtmWred OBJECT IDENTIFIER ::= {genEquipEthernetSwitchETM 10}
+
+genEquipEthernetSwitchEtmWredAdmin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Enabling/Disabling WRED."
+ ::= { genEquipEthernetSwitchEtmWred 1 }
+
+
+genEquipEthernetSwitchEtmWredThresholdsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipEthernetSwitchEtmWredThresholdsEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "WRED thresholds per queue."
+ ::= { genEquipEthernetSwitchEtmWred 2 }
+
+genEquipEthernetSwitchEtmWredThresholdsEntry OBJECT-TYPE
+ SYNTAX GenEquipEthernetSwitchEtmWredThresholdsEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "WRED entry thresholds per queue."
+ INDEX { genEquipEthernetSwitchEtmWredQueuesIndex }
+ ::= { genEquipEthernetSwitchEtmWredThresholdsTable 1 }
+
+GenEquipEthernetSwitchEtmWredThresholdsEntry ::=
+ SEQUENCE {
+ genEquipEthernetSwitchEtmWredQueuesIndex
+ INTEGER,
+ genEquipEthernetSwitchEtmWredThresholdsGreenThLow
+ INTEGER,
+ genEquipEthernetSwitchEtmWredThresholdsGreenThHigh
+ INTEGER,
+ genEquipEthernetSwitchEtmWredThresholdsYellowThLow
+ INTEGER,
+ genEquipEthernetSwitchEtmWredThresholdsYellowThHigh
+ INTEGER,
+ genEquipEthernetSwitchEtmWredThresholdsGreenMaxDrop
+ INTEGER,
+ genEquipEthernetSwitchEtmWredThresholdsYellowMaxDrop
+ INTEGER
+ }
+
+genEquipEthernetSwitchEtmWredQueuesIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..8)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "WRED thresholds per queue."
+ ::= { genEquipEthernetSwitchEtmWredThresholdsEntry 1 }
+
+genEquipEthernetSwitchEtmWredThresholdsGreenThLow OBJECT-TYPE
+ SYNTAX INTEGER (0..4000)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "WRED green low threshold defines the queue level (in Kbits) point
+ that the mechanism should start checking if to drop the green frames."
+ ::= { genEquipEthernetSwitchEtmWredThresholdsEntry 2 }
+
+genEquipEthernetSwitchEtmWredThresholdsGreenThHigh OBJECT-TYPE
+ SYNTAX INTEGER (0..4000)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "WRED green high threshold defines the queue level of occupancy (in Kbits) point that the WRED
+ must drop all arriving green colored frames."
+ ::= { genEquipEthernetSwitchEtmWredThresholdsEntry 3 }
+
+genEquipEthernetSwitchEtmWredThresholdsYellowThLow OBJECT-TYPE
+ SYNTAX INTEGER (0..4000)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "WRED yellow low threshold defines the queue level (in Kbits) point that the mechanism should
+ start checking if to drop the yellow frames."
+ ::= { genEquipEthernetSwitchEtmWredThresholdsEntry 4 }
+
+genEquipEthernetSwitchEtmWredThresholdsYellowThHigh OBJECT-TYPE
+ SYNTAX INTEGER (0..4000)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "WRED yellow high threshold defines the queue level of occupancy (in Kbits) point that the WRED
+ must drop all arriving yellow colored frames."
+ ::= { genEquipEthernetSwitchEtmWredThresholdsEntry 5 }
+
+genEquipEthernetSwitchEtmWredThresholdsGreenMaxDrop OBJECT-TYPE
+ SYNTAX INTEGER (0..100)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "WRED green max drop threshold the probability to drop frame at the green high threshold (in percent based units)."
+ ::= { genEquipEthernetSwitchEtmWredThresholdsEntry 6 }
+
+genEquipEthernetSwitchEtmWredThresholdsYellowMaxDrop OBJECT-TYPE
+ SYNTAX INTEGER (0..100)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "WRED yellow max drop threshold the probability to drop frame at the yellow high threshold (in percent based units)."
+ ::= { genEquipEthernetSwitchEtmWredThresholdsEntry 7 }
+
+
+-- TM Marker configurations
+genEquipEthernetSwitchEtmMarker OBJECT IDENTIFIER ::= {genEquipEthernetSwitchETM 11}
+
+genEquipEthernetSwitchEtmMarkerAdmin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Enabling/Disabling marking of VLAN P-bits and DEI/CFI bit at the egress."
+ ::= { genEquipEthernetSwitchEtmMarker 1 }
+
+
+genEquipEthernetSwitchEtmMarkerTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipEthernetSwitchEtmMarkerEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of CoS and color to Pbits and DEI marking for S-VALNS."
+ ::= { genEquipEthernetSwitchEtmMarker 2 }
+
+genEquipEthernetSwitchEtmMarkerEntry OBJECT-TYPE
+ SYNTAX GenEquipEthernetSwitchEtmMarkerEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of CoS and color to Pbits and DEI marking for S-VALNS."
+ INDEX { genEquipEthernetSwitchEtmMarkerCoS,
+ genEquipEthernetSwitchEtmMarkerColor
+ }
+ ::= { genEquipEthernetSwitchEtmMarkerTable 1 }
+
+GenEquipEthernetSwitchEtmMarkerEntry ::=
+ SEQUENCE {
+ genEquipEthernetSwitchEtmMarkerCoS
+ INTEGER,
+ genEquipEthernetSwitchEtmMarkerColor
+ INTEGER,
+ genEquipEthernetSwitchEtmMarkerPbit
+ INTEGER,
+ genEquipEthernetSwitchEtmMarkerCfi
+ INTEGER
+ }
+
+genEquipEthernetSwitchEtmMarkerCoS OBJECT-TYPE
+ SYNTAX INTEGER (1..8)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "CoS value as was mapped by the TM calssifier."
+ ::= { genEquipEthernetSwitchEtmMarkerEntry 1 }
+
+genEquipEthernetSwitchEtmMarkerColor OBJECT-TYPE
+ SYNTAX INTEGER (1..2)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Color value as was mapped by the TM calssifier."
+ ::= { genEquipEthernetSwitchEtmMarkerEntry 2 }
+
+genEquipEthernetSwitchEtmMarkerPbit OBJECT-TYPE
+ SYNTAX INTEGER (1..8)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "VLAN 802.1p P-bit value to be modified."
+ ::= { genEquipEthernetSwitchEtmMarkerEntry 3 }
+
+genEquipEthernetSwitchEtmMarkerCfi OBJECT-TYPE
+ SYNTAX INTEGER (1..2)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "VLAN CFI/DEI value to be modified."
+ ::= { genEquipEthernetSwitchEtmMarkerEntry 4 }
+
+
+-- TM Scheduler configuration
+genEquipEthernetSwitchEtmScheduler OBJECT IDENTIFIER ::= {genEquipEthernetSwitchETM 12}
+
+genEquipEthernetSwitchEtmSchedulerQuantum OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "WFQ Quantum for credit calculation in bytes (64, 128, 256, 512)."
+ ::= { genEquipEthernetSwitchEtmScheduler 1 }
+
+
+genEquipEthernetSwitchEtmSchedulerConfigTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipEthernetSwitchEtmSchedulerConfigEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table for scheduler configuration: priority and weight for each queue."
+ ::= { genEquipEthernetSwitchEtmScheduler 2 }
+
+genEquipEthernetSwitchEtmSchedulerConfigEntry OBJECT-TYPE
+ SYNTAX GenEquipEthernetSwitchEtmSchedulerConfigEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table entry for scheduler configuration: priority and weight for each queue."
+ INDEX { genEquipEthernetSwitchEtmSchedulerConfigQueueIndex }
+ ::= { genEquipEthernetSwitchEtmSchedulerConfigTable 1 }
+
+GenEquipEthernetSwitchEtmSchedulerConfigEntry ::=
+ SEQUENCE {
+ genEquipEthernetSwitchEtmSchedulerConfigQueueIndex
+ INTEGER,
+ genEquipEthernetSwitchEtmSchedulerConfigPriority
+ INTEGER,
+ genEquipEthernetSwitchEtmSchedulerConfigWeight
+ INTEGER
+ }
+
+genEquipEthernetSwitchEtmSchedulerConfigQueueIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..8)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "queue index."
+ ::= { genEquipEthernetSwitchEtmSchedulerConfigEntry 1 }
+
+genEquipEthernetSwitchEtmSchedulerConfigPriority OBJECT-TYPE
+ SYNTAX INTEGER (1..4)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Strict priority of each queue. 4=highest , 1=lowest."
+ ::= { genEquipEthernetSwitchEtmSchedulerConfigEntry 2 }
+
+genEquipEthernetSwitchEtmSchedulerConfigWeight OBJECT-TYPE
+ SYNTAX INTEGER (0..15)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "WFQ Weights for each queue"
+ ::= { genEquipEthernetSwitchEtmSchedulerConfigEntry 3 }
+
+-- TM Egress shaper configuration
+genEquipEthernetSwitchEtmShaper OBJECT IDENTIFIER ::= {genEquipEthernetSwitchETM 13}
+
+genEquipEthernetSwitchEtmShaperGlobalAdmin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Global Shaper admin disables/enables the global shaping feature."
+ ::= { genEquipEthernetSwitchEtmShaper 1 }
+
+genEquipEthernetSwitchEtmShaperConfigTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipEthernetSwitchEtmShaperConfigEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of shapers' configurations. Each shaper is on the egress of a queue.."
+ ::= { genEquipEthernetSwitchEtmShaper 2 }
+
+genEquipEthernetSwitchEtmShaperConfigEntry OBJECT-TYPE
+ SYNTAX GenEquipEthernetSwitchEtmShaperConfigEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table entry of shapers' configurations. Each shaper is on the egress of a queue.."
+ INDEX { genEquipEthernetSwitchEtmShaperConfigIndex }
+ ::= { genEquipEthernetSwitchEtmShaperConfigTable 1 }
+
+GenEquipEthernetSwitchEtmShaperConfigEntry ::=
+ SEQUENCE {
+ genEquipEthernetSwitchEtmShaperConfigIndex
+ INTEGER,
+ genEquipEthernetSwitchEtmShaperConfigAdmin
+ INTEGER,
+ genEquipEthernetSwitchEtmShaperConfigCir
+ INTEGER,
+ genEquipEthernetSwitchEtmShaperConfigCbs
+ INTEGER,
+ genEquipEthernetSwitchEtmShaperConfigLineComp
+ INTEGER
+ }
+
+genEquipEthernetSwitchEtmShaperConfigIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..8)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "queue index."
+ ::= { genEquipEthernetSwitchEtmShaperConfigEntry 1 }
+
+genEquipEthernetSwitchEtmShaperConfigAdmin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Egress Shaper admin disables/enables the shaping feature per queue."
+ ::= { genEquipEthernetSwitchEtmShaperConfigEntry 2 }
+
+genEquipEthernetSwitchEtmShaperConfigCir OBJECT-TYPE
+ SYNTAX INTEGER (0..1000000)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Egress shaper CIR value - the committed rate as given by the user."
+ ::= { genEquipEthernetSwitchEtmShaperConfigEntry 3 }
+
+genEquipEthernetSwitchEtmShaperConfigCbs OBJECT-TYPE
+ SYNTAX INTEGER (0..128000)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Egress shaper committed burst size value."
+ ::= { genEquipEthernetSwitchEtmShaperConfigEntry 4 }
+
+genEquipEthernetSwitchEtmShaperConfigLineComp OBJECT-TYPE
+ SYNTAX INTEGER (0..255)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Egress shaper line compensation value transmitted IFG + Preamble.
+ The shaper adds this value to each arriving frame size."
+ ::= { genEquipEthernetSwitchEtmShaperConfigEntry 5 }
+
+-- TM Statistics counters
+genEquipEthernetSwitchEtmStatistics OBJECT IDENTIFIER ::= {genEquipEthernetSwitchETM 14}
+
+genEquipEthernetSwitchEtmStatisticsPortTotalBytesTransmitted OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The number of bytes transmitted via the port (goes into PM)."
+ ::= { genEquipEthernetSwitchEtmStatistics 1 }
+
+genEquipEthernetSwitchEtmStatisticsPortTotalUnicastFramesTransmitted OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "TThe number of Unicast frames transmitted to the radio port.."
+ ::= { genEquipEthernetSwitchEtmStatistics 2 }
+
+
+genEquipEthernetSwitchEtmStatisticsPortTotalMulticastFramesTransmitted OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The number of Multicast frames transmitted to the radio port.."
+ ::= { genEquipEthernetSwitchEtmStatistics 3 }
+
+
+genEquipEthernetSwitchEtmStatisticsPortTotalBroadcastFramesTransmitted OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The number of Broadcast frames transmitted to the radio port.."
+ ::= { genEquipEthernetSwitchEtmStatistics 4 }
+
+
+genEquipEthernetSwitchEtmStatisticsPortFrames64octTransmitted OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The total number of frames transmitted with a length of exactly 64 Octets."
+ ::= { genEquipEthernetSwitchEtmStatistics 5 }
+
+
+genEquipEthernetSwitchEtmStatisticsPortFrames65to127Transmitted OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The total number of frames transmitted with a length of 65-127 Octets."
+ ::= { genEquipEthernetSwitchEtmStatistics 6 }
+
+
+genEquipEthernetSwitchEtmStatisticsPortFrames128to255Transmitted OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The total number of frames transmitted with a length of 128-255 Octets."
+ ::= { genEquipEthernetSwitchEtmStatistics 7 }
+
+
+genEquipEthernetSwitchEtmStatisticsPortFrames256to511Transmitted OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The total number of frames transmitted with a length of 256-511 Octets)."
+ ::= { genEquipEthernetSwitchEtmStatistics 8 }
+
+
+genEquipEthernetSwitchEtmStatisticsPortFrames512to1023Transmitted OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "TThe total number of frames transmitted with a length of 512-1023 Octets."
+ ::= { genEquipEthernetSwitchEtmStatistics 9 }
+
+
+genEquipEthernetSwitchEtmStatisticsPortFrames1024toMtuTransmitted OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The total number of frames transmitted with a length between 1024 and MaxTransmitSize Octets."
+ ::= { genEquipEthernetSwitchEtmStatistics 10 }
+
+
+
+-- IP Pbits to Queue
+genEquipEthernetSwitchQoSIPPbits OBJECT IDENTIFIER ::= {genEquipEthernetSwitchQoS 4}
+
+genEquipEthernetSwitchQoSIPPbitsIPPrio OBJECT-TYPE
+ SYNTAX INTEGER {
+ ipPrecedence(0),
+ ipv4TOSIPv6(1) -- diffserv.
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "IP priority options."
+ ::= { genEquipEthernetSwitchQoSIPPbits 1 }
+
+genEquipEthernetSwitchQoSIPPbitsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipEthernetSwitchQoSIPPbitsEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Mapping of IP pbits to Queue."
+ ::= { genEquipEthernetSwitchQoSIPPbits 2 }
+
+genEquipEthernetSwitchQoSIPPbitsEntry OBJECT-TYPE
+ SYNTAX GenEquipEthernetSwitchQoSIPPbitsEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Mapping of IP pbits to Queue."
+ INDEX { genEquipEthernetSwitchQoSIPPbitsId }
+ ::= { genEquipEthernetSwitchQoSIPPbitsTable 1 }
+
+GenEquipEthernetSwitchQoSIPPbitsEntry ::=
+ SEQUENCE {
+ genEquipEthernetSwitchQoSIPPbitsId
+ INTEGER,
+ genEquipEthernetSwitchQoSIPPbitsQueue
+ QueueName
+}
+
+genEquipEthernetSwitchQoSIPPbitsId OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The pbit number."
+ ::= { genEquipEthernetSwitchQoSIPPbitsEntry 1 }
+
+genEquipEthernetSwitchQoSIPPbitsQueue OBJECT-TYPE
+ SYNTAX QueueName
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "the queue for that pbit."
+ ::= { genEquipEthernetSwitchQoSIPPbitsEntry 2 }
+
+
+
+-- VLAN Pbits to queue
+
+genEquipEthernetSwitchQoSVLANPbitsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipEthernetSwitchQoSVLANPbitsEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "VLAN pbit to queue mapping table."
+ ::= { genEquipEthernetSwitchQoS 5 }
+
+genEquipEthernetSwitchQoSVLANPbitsEntry OBJECT-TYPE
+ SYNTAX GenEquipEthernetSwitchQoSVLANPbitsEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "VLAN pbit to queue mapping table."
+ INDEX { genEquipEthernetSwitchQoSVLANPbitsId }
+ ::= { genEquipEthernetSwitchQoSVLANPbitsTable 1 }
+
+GenEquipEthernetSwitchQoSVLANPbitsEntry ::=
+ SEQUENCE {
+ genEquipEthernetSwitchQoSVLANPbitsId
+ INTEGER,
+ genEquipEthernetSwitchQoSVLANPbitsQueue
+ QueueName
+}
+
+genEquipEthernetSwitchQoSVLANPbitsId OBJECT-TYPE
+ SYNTAX INTEGER (1..8)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The VLAN'S pbit (index of the table)"
+ ::= { genEquipEthernetSwitchQoSVLANPbitsEntry 1 }
+
+genEquipEthernetSwitchQoSVLANPbitsQueue OBJECT-TYPE
+ SYNTAX QueueName
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The mapped queue for the corresponding VLAN ."
+ ::= { genEquipEthernetSwitchQoSVLANPbitsEntry 2 }
+
+
+-- Queue Weights
+genEquipEthernetSwitchQoSQueueWeightsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipEthernetSwitchQoSQueueWeightsEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION "Queue weights mapping table."
+ ::= { genEquipEthernetSwitchQoS 6 }
+
+genEquipEthernetSwitchQoSQueueWeightsEntry OBJECT-TYPE
+ SYNTAX GenEquipEthernetSwitchQoSQueueWeightsEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION "Queue weights mapping table."
+ INDEX { genEquipEthernetSwitchQoSQueueWeightsId }
+ ::= { genEquipEthernetSwitchQoSQueueWeightsTable 1 }
+
+GenEquipEthernetSwitchQoSQueueWeightsEntry ::=
+ SEQUENCE {
+ genEquipEthernetSwitchQoSQueueWeightsId
+ INTEGER,
+ genEquipEthernetSwitchQoSQueueWeightsQueue
+ QueueName,
+ genEquipEthernetSwitchQoSQueueWeightsWeight
+ INTEGER
+}
+
+
+genEquipEthernetSwitchQoSQueueWeightsId OBJECT-TYPE
+ SYNTAX INTEGER (1..4)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Index for this table."
+ ::= { genEquipEthernetSwitchQoSQueueWeightsEntry 1 }
+
+genEquipEthernetSwitchQoSQueueWeightsQueue OBJECT-TYPE
+ SYNTAX QueueName
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The queue number."
+ ::= { genEquipEthernetSwitchQoSQueueWeightsEntry 2 }
+
+genEquipEthernetSwitchQoSQueueWeightsWeight OBJECT-TYPE
+ SYNTAX INTEGER (1..32)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The weight for the queue"
+ ::= { genEquipEthernetSwitchQoSQueueWeightsEntry 3 }
+
+
+
+
+-- Policer list
+-- Policer Name table
+genEquipEthernetSwitchQoSPolicerNameTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipEthernetSwitchQoSPolicerNameEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of configured policers."
+ ::= { genEquipEthernetSwitchQoS 7 }
+
+genEquipEthernetSwitchQoSPolicerNameEntry OBJECT-TYPE
+ SYNTAX GenEquipEthernetSwitchQoSPolicerNameEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION "Table of configured policers."
+ INDEX { genEquipEthernetSwitchQoSPolicerNameId }
+ ::= { genEquipEthernetSwitchQoSPolicerNameTable 1 }
+
+GenEquipEthernetSwitchQoSPolicerNameEntry ::=
+ SEQUENCE {
+ genEquipEthernetSwitchQoSPolicerNameId
+ INTEGER,
+ genEquipEthernetSwitchQoSPolicerNameName
+ DisplayString,
+ genEquipEthernetSwitchQoSPolicerNameRowStatus
+ RowStatus
+}
+
+genEquipEthernetSwitchQoSPolicerNameId OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Policer ID"
+ ::= { genEquipEthernetSwitchQoSPolicerNameEntry 1 }
+
+genEquipEthernetSwitchQoSPolicerNameName OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Policer name."
+ ::= { genEquipEthernetSwitchQoSPolicerNameEntry 2 }
+
+genEquipEthernetSwitchQoSPolicerNameRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Policer row status."
+ ::= { genEquipEthernetSwitchQoSPolicerNameEntry 30 }
+
+-- Policer list table
+genEquipEthernetSwitchQoSPolicerListTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipEthernetSwitchQoSPolicerListEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "The policer class table list."
+ ::= { genEquipEthernetSwitchQoS 8 }
+
+genEquipEthernetSwitchQoSPolicerListEntry OBJECT-TYPE
+ SYNTAX GenEquipEthernetSwitchQoSPolicerListEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "The policer class table list."
+ INDEX { genEquipEthernetSwitchQoSPolicerNameId, genEquipEthernetSwitchQoSPolicerListId }
+ ::= { genEquipEthernetSwitchQoSPolicerListTable 1 }
+
+GenEquipEthernetSwitchQoSPolicerListEntry ::=
+ SEQUENCE {
+ genEquipEthernetSwitchQoSPolicerListId
+ INTEGER,
+ genEquipEthernetSwitchQoSPolicerListName
+ DisplayString,
+ genEquipEthernetSwitchQoSPolicerListClassName
+ DisplayString,
+ genEquipEthernetSwitchQoSPolicerListTrafficType
+ INTEGER,
+ genEquipEthernetSwitchQoSPolicerListCIR
+ INTEGER,
+ genEquipEthernetSwitchQoSPolicerListCBS
+ INTEGER,
+ genEquipEthernetSwitchQoSPolicerListRowStatus
+ RowStatus
+}
+
+genEquipEthernetSwitchQoSPolicerListId OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The policer ID."
+ ::= { genEquipEthernetSwitchQoSPolicerListEntry 1 }
+
+genEquipEthernetSwitchQoSPolicerListName OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The policer class name"
+ ::= { genEquipEthernetSwitchQoSPolicerListEntry 2 }
+
+genEquipEthernetSwitchQoSPolicerListClassName OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The policer class name"
+ ::= { genEquipEthernetSwitchQoSPolicerListEntry 3 }
+
+genEquipEthernetSwitchQoSPolicerListTrafficType OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknownUcast(1),
+ unknowMulticast(2),
+ broadcast(3),
+ multicast(5),
+ unicast(6),
+ arp(8),
+ tcpData(9),
+ tcpControl(10),
+ udp(11),
+ noTcpUdp(12),
+ firstPriority(13),
+ secondPriority(14),
+ thirdPriority(15),
+ forthPriority(16),
+ allTraffic(17)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The traffic type that the policer applies to."
+ ::= { genEquipEthernetSwitchQoSPolicerListEntry 4 }
+
+genEquipEthernetSwitchQoSPolicerListCIR OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The CIR (Critical Information Rate) value (in Kbps)"
+ ::= { genEquipEthernetSwitchQoSPolicerListEntry 5 }
+
+genEquipEthernetSwitchQoSPolicerListCBS OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The CBS (Critical Burst Size) value (in Bytes)"
+ ::= { genEquipEthernetSwitchQoSPolicerListEntry 6 }
+
+genEquipEthernetSwitchQoSPolicerListRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Row status of the table."
+ ::= { genEquipEthernetSwitchQoSPolicerListEntry 30 }
+
+
+-- Static MAC
+genEquipEthernetSwitchQoSStaticMacTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipEthernetSwitchQoSStaticMacEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Static MAC forwarding table."
+ ::= { genEquipEthernetSwitchQoS 9 }
+
+genEquipEthernetSwitchQoSStaticMacEntry OBJECT-TYPE
+ SYNTAX GenEquipEthernetSwitchQoSStaticMacEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Static MAC forwarding table."
+ INDEX { genEquipEthernetSwitchQoSStaticMacId }
+ ::= { genEquipEthernetSwitchQoSStaticMacTable 1 }
+
+GenEquipEthernetSwitchQoSStaticMacEntry ::=
+ SEQUENCE {
+ genEquipEthernetSwitchQoSStaticMacId
+ INTEGER,
+ genEquipEthernetSwitchQoSStaticMacAddr
+ OCTET STRING,
+ genEquipEthernetSwitchQoSStaticMacVlanId
+ INTEGER,
+ genEquipEthernetSwitchQoSStaticMacForwardTo
+ INTEGER,
+ genEquipEthernetSwitchQoSStaticMacPriority
+ INTEGER,
+ genEquipEthernetSwitchQoSStaticMacRowStatus
+ RowStatus
+}
+
+genEquipEthernetSwitchQoSStaticMacId OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The index of the table"
+ ::= { genEquipEthernetSwitchQoSStaticMacEntry 1 }
+
+genEquipEthernetSwitchQoSStaticMacAddr OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Static MAC Address."
+ ::= { genEquipEthernetSwitchQoSStaticMacEntry 2 }
+
+genEquipEthernetSwitchQoSStaticMacVlanId OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "VLAN ID for this MAC."
+ ::= { genEquipEthernetSwitchQoSStaticMacEntry 3 }
+
+genEquipEthernetSwitchQoSStaticMacForwardTo OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The port number to be forwarded to, starting from 1."
+ ::= { genEquipEthernetSwitchQoSStaticMacEntry 4 }
+
+genEquipEthernetSwitchQoSStaticMacPriority OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The priority to be given to this MAC address."
+ ::= { genEquipEthernetSwitchQoSStaticMacEntry 5 }
+
+genEquipEthernetSwitchQoSStaticMacRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The row status of the operation."
+ ::= { genEquipEthernetSwitchQoSStaticMacEntry 30 }
+
+
+-- MSTP
+--
+genEquipProtocols OBJECT IDENTIFIER ::= {genEquipEthernetSwitch 6}
+
+genEquipProtocolsMstp OBJECT IDENTIFIER ::= {genEquipProtocols 1}
+
+--
+-- MSTP General attributes - mstp-general-attributes-table
+--
+
+genEquipProtocolsMstpGeneralAttributesTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipProtocolsMstpGeneralAttributesEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "A table containing NE configuration and maintenance attributes which are not part of the standard MIB."
+ ::= { genEquipProtocolsMstp 1 }
+
+genEquipProtocolsMstpGeneralAttributesEntry OBJECT-TYPE
+ SYNTAX GenEquipProtocolsMstpGeneralAttributesEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "A table containing NE configuration and maintenance attributes which are not part of the standard MIB."
+ INDEX { genEquipProtocolsMstpGeneralAttributesComponentId }
+ ::= { genEquipProtocolsMstpGeneralAttributesTable 1 }
+
+GenEquipProtocolsMstpGeneralAttributesEntry ::=
+ SEQUENCE {
+ genEquipProtocolsMstpGeneralAttributesComponentId
+ INTEGER,
+ genEquipProtocolsMstpGeneralAttributesMstpEnabled
+ TrueFalse,
+ genEquipProtocolsMstpGeneralAttributesNumberOfinstances
+ INTEGER,
+ genEquipProtocolsMstpGeneralAttributesMigrateTime
+ INTEGER,
+ genEquipProtocolsMstpGeneralAttributesBpduDestinationMAC
+ INTEGER,
+ genEquipProtocolsMstpGeneralAttributesFrozen
+ TrueFalse,
+ genEquipProtocolsMstpGeneralAttributesSdHandling
+ INTEGER,
+ genEquipProtocolsMstpGeneralAttributesReset
+ TrueFalse,
+ genEquipProtocolsMstpGeneralAttributesResetCounters
+ TrueFalse
+ }
+
+genEquipProtocolsMstpGeneralAttributesComponentId OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Distinguished between multiple virtual bridge instances within a PB or PBB. In simple situations, i.e. single component the default is 1"
+ ::= { genEquipProtocolsMstpGeneralAttributesEntry 1 }
+
+genEquipProtocolsMstpGeneralAttributesMstpEnabled OBJECT-TYPE
+ SYNTAX TrueFalse
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "When set, MSTP protocol is enabled on NE"
+ ::= { genEquipProtocolsMstpGeneralAttributesEntry 2 }
+
+genEquipProtocolsMstpGeneralAttributesNumberOfinstances OBJECT-TYPE
+ SYNTAX INTEGER (2..16)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Specifies number of instances supported. Value ranges from 2 to 16."
+ ::= { genEquipProtocolsMstpGeneralAttributesEntry 3 }
+
+genEquipProtocolsMstpGeneralAttributesMigrateTime OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "When MSTP bridge detects the presence of STP data on one of its ports,
+ it migrates after 'MigrateTime' has elapsed, if migrate is enabled."
+ ::= { genEquipProtocolsMstpGeneralAttributesEntry 4 }
+
+genEquipProtocolsMstpGeneralAttributesBpduDestinationMAC OBJECT-TYPE
+ SYNTAX INTEGER {
+ customer(0),
+ provider(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "When set to 'customer', BPDU Dest MAC address should be set to 0x0180-C200-0000.
+ Otherwise, BPDU Dest MAC address should be set to 0x0180-C200-0008"
+ ::= { genEquipProtocolsMstpGeneralAttributesEntry 5 }
+
+genEquipProtocolsMstpGeneralAttributesFrozen OBJECT-TYPE
+ SYNTAX TrueFalse
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "When set, MSTP protocol stops running in NE., i.e. BPDU are neither processed nor transmitted.
+ All ports states are maintained."
+ ::= { genEquipProtocolsMstpGeneralAttributesEntry 6 }
+
+genEquipProtocolsMstpGeneralAttributesSdHandling OBJECT-TYPE
+ SYNTAX INTEGER {
+ ignored(0),
+ sameAsSF(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "When set to 'ignored', SD (Signal Degrade) failures are ignored in MSTP. Otherwise, SD failures are treated same as SF."
+ ::= { genEquipProtocolsMstpGeneralAttributesEntry 7 }
+
+genEquipProtocolsMstpGeneralAttributesReset OBJECT-TYPE
+ SYNTAX INTEGER {
+ noAction(0),
+ reset(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "When set to reset, MSTP Protocol suit is reset"
+ ::= { genEquipProtocolsMstpGeneralAttributesEntry 8 }
+
+genEquipProtocolsMstpGeneralAttributesResetCounters OBJECT-TYPE
+ SYNTAX INTEGER {
+ noAction(0),
+ reset(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "When set to reset, MSTP counters are reset"
+ ::= { genEquipProtocolsMstpGeneralAttributesEntry 9 }
+
+--
+-- MSTP counters per instance per port - mstp-mstp-port-counters-table
+--
+
+genEquipProtocolsMstpCountersTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipProtocolsMstpCountersEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "A table containing MSTP counters per instance per port."
+ ::= { genEquipProtocolsMstp 2 }
+
+genEquipProtocolsMstpCountersEntry OBJECT-TYPE
+ SYNTAX GenEquipProtocolsMstpCountersEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "A table containing MSTP counters per instance per port."
+ INDEX { genEquipProtocolsMstpCountersPortId }
+ ::= { genEquipProtocolsMstpCountersTable 1 }
+
+GenEquipProtocolsMstpCountersEntry ::=
+ SEQUENCE {
+ genEquipProtocolsMstpCountersPortId
+ INTEGER,
+ genEquipProtocolsMstpCountersNumberOfReceivedTCN
+ INTEGER,
+ genEquipProtocolsMstpCountersNumberOfReceivedConfigurationBpdu
+ INTEGER,
+ genEquipProtocolsMstpCountersNumberOfReceivedRstBpdu
+ INTEGER,
+ genEquipProtocolsMstpCountersNumberOfReceivedMstBpdu
+ INTEGER,
+ genEquipProtocolsMstpCountersNumberOfTransmittedTcnBpdu
+ INTEGER,
+ genEquipProtocolsMstpCountersNumberOfTransmittedConfigurationBpdu
+ INTEGER,
+ genEquipProtocolsMstpCountersNumberOfTransmittedRstBpdu
+ INTEGER,
+ genEquipProtocolsMstpCountersNumberOfTransmittedMstBpdu
+ INTEGER
+ }
+
+genEquipProtocolsMstpCountersPortId OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Port ID (ifIndex)"
+ ::= { genEquipProtocolsMstpCountersEntry 1 }
+
+genEquipProtocolsMstpCountersNumberOfReceivedTCN OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Number of received TCN"
+ ::= { genEquipProtocolsMstpCountersEntry 2 }
+
+genEquipProtocolsMstpCountersNumberOfReceivedConfigurationBpdu OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Number of received Configuration BPDU."
+ ::= { genEquipProtocolsMstpCountersEntry 3 }
+
+genEquipProtocolsMstpCountersNumberOfReceivedRstBpdu OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Number of received RST BPDU."
+ ::= { genEquipProtocolsMstpCountersEntry 4 }
+
+genEquipProtocolsMstpCountersNumberOfReceivedMstBpdu OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Number of received MST BPDU"
+ ::= { genEquipProtocolsMstpCountersEntry 5 }
+
+genEquipProtocolsMstpCountersNumberOfTransmittedTcnBpdu OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Number Of Transmitted TCN BPDU."
+ ::= { genEquipProtocolsMstpCountersEntry 6 }
+
+genEquipProtocolsMstpCountersNumberOfTransmittedConfigurationBpdu OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Number of transmitted Configuration BPDU."
+ ::= { genEquipProtocolsMstpCountersEntry 7 }
+
+genEquipProtocolsMstpCountersNumberOfTransmittedRstBpdu OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Number of transmitted RST BPDU"
+ ::= { genEquipProtocolsMstpCountersEntry 8 }
+
+genEquipProtocolsMstpCountersNumberOfTransmittedMstBpdu OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Number of transmitted MST BPDU"
+ ::= { genEquipProtocolsMstpCountersEntry 9 }
+
+
+genEquipProtocolsEoam OBJECT IDENTIFIER ::= {genEquipProtocols 2}
+
+--
+-- EOAM Configuration and Status - eoam-bw-vsm-table
+--
+
+genEquipProtocolsEoamBwVsmTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipProtocolsEoamBwVsmEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "A Table containing Ethernet OAM Configuration and Status."
+ ::= { genEquipProtocolsEoam 1 }
+
+genEquipProtocolsEoamBwVsmEntry OBJECT-TYPE
+ SYNTAX GenEquipProtocolsEoamBwVsmEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "A Table entry containing Ethernet OAM Configuration and Status."
+ INDEX { genEquipProtocolsEoamBwVsmName }
+ ::= { genEquipProtocolsEoamBwVsmTable 1 }
+
+GenEquipProtocolsEoamBwVsmEntry ::=
+ SEQUENCE {
+ genEquipProtocolsEoamBwVsmName
+ DisplayString,
+ genEquipProtocolsEoamBwVsmAdmin
+ Dot1CfmInterfaceStatus,
+ genEquipProtocolsEoamBwVsmPeriod
+ INTEGER,
+ genEquipProtocolsEoamBwVsmCurrentBw
+ INTEGER,
+ genEquipProtocolsEoamBwVsmControlIfindex
+ INTEGER,
+ genEquipProtocolsEoamBwVsmId
+ INTEGER,
+ genEquipProtocolsEoamBwVsmMonitoredIfindex
+ INTEGER,
+ genEquipProtocolsEoamBwVsmHoldoff
+ INTEGER,
+ genEquipProtocolsEoamBwVsmHoldoffStartTime
+ INTEGER,
+ genEquipProtocolsEoamBwVsmHoldoffState
+ INTEGER,
+ genEquipProtocolsEoamBwVsmLastSentMsg
+ OCTET STRING,
+ genEquipProtocolsEoamBwVsmMel
+ INTEGER,
+ genEquipProtocolsEoamBwVsmMonitoringInterval
+ INTEGER,
+ genEquipProtocolsEoamBwVsmNominalBw
+ INTEGER,
+ genEquipProtocolsEoamBwVsmTxMsgCounter
+ INTEGER,
+ genEquipProtocolsEoamBwVsmVersion
+ INTEGER,
+ genEquipProtocolsEoamBwVsmVlan
+ INTEGER,
+ genEquipProtocolsEoamBwVsmResetMsgCounter
+ OffOn,
+ genEquipProtocolsEoamBwVsmRowStatus
+ RowStatus
+ }
+
+genEquipProtocolsEoamBwVsmName OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Name of EOAM entity"
+ ::= { genEquipProtocolsEoamBwVsmEntry 1 }
+
+genEquipProtocolsEoamBwVsmAdmin OBJECT-TYPE
+ SYNTAX Dot1CfmInterfaceStatus
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Eoam Admin. Possible valuew: Up, Down"
+ ::= { genEquipProtocolsEoamBwVsmEntry 2 }
+
+genEquipProtocolsEoamBwVsmPeriod OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The interval of transmitting messages, when current nominal."
+ ::= { genEquipProtocolsEoamBwVsmEntry 3 }
+
+genEquipProtocolsEoamBwVsmCurrentBw OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The Current BW measure by 4 samples (with 250msec interval)"
+ ::= { genEquipProtocolsEoamBwVsmEntry 4 }
+
+genEquipProtocolsEoamBwVsmControlIfindex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Control Interface of the eoam entity"
+ ::= { genEquipProtocolsEoamBwVsmEntry 5 }
+
+genEquipProtocolsEoamBwVsmId OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "EOAM index."
+ ::= { genEquipProtocolsEoamBwVsmEntry 6 }
+
+genEquipProtocolsEoamBwVsmMonitoredIfindex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Monitored Interface of the eoam entity"
+ ::= { genEquipProtocolsEoamBwVsmEntry 7 }
+
+genEquipProtocolsEoamBwVsmHoldoff OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The holdoff time in which, if BW below nominal, a message is sent"
+ ::= { genEquipProtocolsEoamBwVsmEntry 8 }
+
+genEquipProtocolsEoamBwVsmHoldoffStartTime OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The holdoff start counting time"
+ ::= { genEquipProtocolsEoamBwVsmEntry 9 }
+
+genEquipProtocolsEoamBwVsmHoldoffState OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The holdoff state of the EOAM entity"
+ ::= { genEquipProtocolsEoamBwVsmEntry 10 }
+
+genEquipProtocolsEoamBwVsmLastSentMsg OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The last EOAM message transmitted"
+ ::= { genEquipProtocolsEoamBwVsmEntry 11 }
+
+genEquipProtocolsEoamBwVsmMel OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The MEL to be set in the bw-vsm messages"
+ ::= { genEquipProtocolsEoamBwVsmEntry 12 }
+
+genEquipProtocolsEoamBwVsmMonitoringInterval OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The monitoring interval of the average BE calculation"
+ ::= { genEquipProtocolsEoamBwVsmEntry 13 }
+
+genEquipProtocolsEoamBwVsmNominalBw OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The nominal BW of the monitored interface, to be set in the bw-vsm messages"
+ ::= { genEquipProtocolsEoamBwVsmEntry 14 }
+
+genEquipProtocolsEoamBwVsmTxMsgCounter OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The number of transmitted messages"
+ ::= { genEquipProtocolsEoamBwVsmEntry 15 }
+
+genEquipProtocolsEoamBwVsmVersion OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "EOAM version used"
+ ::= { genEquipProtocolsEoamBwVsmEntry 16 }
+
+genEquipProtocolsEoamBwVsmVlan OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The VLAN to be set in the bw-vsm messages"
+ ::= { genEquipProtocolsEoamBwVsmEntry 17 }
+
+genEquipProtocolsEoamBwVsmResetMsgCounter OBJECT-TYPE
+ SYNTAX OffOn
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Reset Messages Counter"
+ ::= { genEquipProtocolsEoamBwVsmEntry 18 }
+
+genEquipProtocolsEoamBwVsmRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Table Mib Row Status."
+::= { genEquipProtocolsEoamBwVsmEntry 30 }
+
+
+genEquipProtocolsG8032Erpi OBJECT IDENTIFIER ::= {genEquipProtocols 3}
+
+--
+-- G8032 ERPI attributes - g8032-erpi-attributes-table
+--
+
+genEquipProtocols8032DestMacAddress OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(6))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "G8032 (Resiliency protocol) destination MAC address"
+ ::= { genEquipProtocolsG8032Erpi 1 }
+
+genEquipProtocolsG8032NodeId OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(10))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "G.8032 Node ID"
+ ::= { genEquipProtocolsG8032Erpi 2 }
+
+--
+--
+genEquipProtocolsG8032ErpiAttributesTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipProtocolsG8032ErpiAttributesEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "A table containing ERPI attributes."
+ ::= { genEquipProtocolsG8032Erpi 10 }
+
+genEquipProtocolsG8032ErpiAttributesEntry OBJECT-TYPE
+ SYNTAX GenEquipProtocolsG8032ErpiAttributesEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "A table entry containing ERPI attributes."
+ INDEX { genEquipProtocolsG8032ErpiAttributesErpiId }
+ ::= { genEquipProtocolsG8032ErpiAttributesTable 1 }
+
+GenEquipProtocolsG8032ErpiAttributesEntry ::=
+ SEQUENCE {
+ genEquipProtocolsG8032ErpiAttributesErpiId
+ INTEGER,
+ genEquipProtocolsG8032ErpiAttributesErpiName
+ DisplayString,
+ genEquipProtocolsG8032ErpiAttributesGuardTime
+ INTEGER,
+ genEquipProtocolsG8032ErpiAttributesHoldoffTime
+ INTEGER,
+ genEquipProtocolsG8032ErpiAttributesLastChangeTs
+ INTEGER,
+ genEquipProtocolsG8032ErpiAttributesLastHpRequest
+ G8032LastState,
+ genEquipProtocolsG8032ErpiAttributesLastLocalState
+ G8032LastState,
+ genEquipProtocolsG8032ErpiAttributesLastRemoteState
+ G8032LastState,
+ genEquipProtocolsG8032ErpiAttributesMegLevel
+ INTEGER,
+ genEquipProtocolsG8032ErpiAttributesDownMep
+ INTEGER,
+ genEquipProtocolsG8032ErpiAttributesRevertive
+ IfMgrTrueFalse,
+ genEquipProtocolsG8032ErpiAttributesRingState
+ INTEGER,
+ genEquipProtocolsG8032ErpiAttributesRplOwner
+ INTEGER,
+ genEquipProtocolsG8032ErpiAttributesSdHandling
+ IfMgrTrueFalse,
+ genEquipProtocolsG8032ErpiAttributesServiceId
+ INTEGER,
+ genEquipProtocolsG8032ErpiAttributesErpiType
+ INTEGER,
+ genEquipProtocolsG8032ErpiAttributesVersion
+ INTEGER,
+ genEquipProtocolsG8032ErpiAttributesVirtualChannel
+ INTEGER,
+ genEquipProtocolsG8032ErpiAttributesWtr
+ INTEGER,
+ genEquipProtocolsG8032ErpiAttributesRowStatus
+ RowStatus
+ }
+
+genEquipProtocolsG8032ErpiAttributesErpiId OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "ERPI ID"
+ ::= { genEquipProtocolsG8032ErpiAttributesEntry 1 }
+
+genEquipProtocolsG8032ErpiAttributesErpiName OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "ERPI Name"
+ ::= { genEquipProtocolsG8032ErpiAttributesEntry 2 }
+
+genEquipProtocolsG8032ErpiAttributesGuardTime OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates the ERPI Guard Time; units are msec, steps are 10msec."
+ ::= { genEquipProtocolsG8032ErpiAttributesEntry 3 }
+
+genEquipProtocolsG8032ErpiAttributesHoldoffTime OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The ERPI holdoff Time; units are msec, steps are 100msec.
+ Controls the time from failure detection to responding to failure"
+ ::= { genEquipProtocolsG8032ErpiAttributesEntry 4 }
+
+genEquipProtocolsG8032ErpiAttributesLastChangeTs OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Denotes the Timestamp of the last ring state machine transition"
+ ::= { genEquipProtocolsG8032ErpiAttributesEntry 5 }
+
+genEquipProtocolsG8032ErpiAttributesLastHpRequest OBJECT-TYPE
+ SYNTAX G8032LastState
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Describes the last high-priority request."
+ ::= { genEquipProtocolsG8032ErpiAttributesEntry 6 }
+
+genEquipProtocolsG8032ErpiAttributesLastLocalState OBJECT-TYPE
+ SYNTAX G8032LastState
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Describes the current local state that is input to the ERPI state machine"
+ ::= { genEquipProtocolsG8032ErpiAttributesEntry 7 }
+
+genEquipProtocolsG8032ErpiAttributesLastRemoteState OBJECT-TYPE
+ SYNTAX G8032LastState
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Describes the last event received from the far end"
+ ::= { genEquipProtocolsG8032ErpiAttributesEntry 8 }
+
+genEquipProtocolsG8032ErpiAttributesMegLevel OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates MEG LEVEL, when interoperating with SOAM"
+ ::= { genEquipProtocolsG8032ErpiAttributesEntry 9 }
+
+genEquipProtocolsG8032ErpiAttributesDownMep OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates if the ERPI is related to a down MEP and if to which one"
+ ::= { genEquipProtocolsG8032ErpiAttributesEntry 10 }
+
+genEquipProtocolsG8032ErpiAttributesRevertive OBJECT-TYPE
+ SYNTAX IfMgrTrueFalse
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the ERPI is revertive"
+ ::= { genEquipProtocolsG8032ErpiAttributesEntry 11 }
+
+genEquipProtocolsG8032ErpiAttributesRingState OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Describes the state in which id ERPI is assumed.
+ Possible states are: Initializing, Idle, Pending, Protecting, FS, MS)"
+ ::= { genEquipProtocolsG8032ErpiAttributesEntry 12 }
+
+genEquipProtocolsG8032ErpiAttributesRplOwner OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0),
+ west(1),
+ east(2),
+ sub-ring(3)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the ERPI is RPL owner and if such, which ERPI Port is the owner"
+ ::= { genEquipProtocolsG8032ErpiAttributesEntry 13 }
+
+genEquipProtocolsG8032ErpiAttributesSdHandling OBJECT-TYPE
+ SYNTAX IfMgrTrueFalse
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates the ERPI takes into account SD (Signal Degraded) events (BER, capacity degradation)"
+ ::= { genEquipProtocolsG8032ErpiAttributesEntry 14 }
+
+genEquipProtocolsG8032ErpiAttributesServiceId OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates Service ID of the ERPI"
+ ::= { genEquipProtocolsG8032ErpiAttributesEntry 15 }
+
+genEquipProtocolsG8032ErpiAttributesErpiType OBJECT-TYPE
+ SYNTAX INTEGER {
+ ring(0),
+ sub-ring(1),
+ ring-with-sub-ring(2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "ERPI Type ( ring / sub-ring / ring with sub-ring port)"
+ ::= { genEquipProtocolsG8032ErpiAttributesEntry 16 }
+
+genEquipProtocolsG8032ErpiAttributesVersion OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates the ERPI version number used in the ERPI protocol"
+ ::= { genEquipProtocolsG8032ErpiAttributesEntry 17 }
+
+genEquipProtocolsG8032ErpiAttributesVirtualChannel OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "VLAN of virtual channel; 0 denotes no virtual channel"
+ ::= { genEquipProtocolsG8032ErpiAttributesEntry 18 }
+
+genEquipProtocolsG8032ErpiAttributesWtr OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates the ERPI WTR; units are minutes"
+ ::= { genEquipProtocolsG8032ErpiAttributesEntry 19 }
+
+genEquipProtocolsG8032ErpiAttributesRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Table Mib Row Status."
+::= { genEquipProtocolsG8032ErpiAttributesEntry 30 }
+
+
+--
+-- G8032 ERP port attributes - g8032-erpi-port-attributes-table
+--
+
+genEquipProtocolsG8032ErpiPortAttributesTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipProtocolsG8032ErpiPortAttributesEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "A table containing ERP port attributes."
+ ::= { genEquipProtocolsG8032Erpi 11 }
+
+genEquipProtocolsG8032ErpiPortAttributesEntry OBJECT-TYPE
+ SYNTAX GenEquipProtocolsG8032ErpiPortAttributesEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "A table entry containing ERP port attributes."
+ INDEX { genEquipProtocolsG8032ErpiPortAttributesErpiId,
+ genEquipProtocolsG8032ErpiPortAttributesErpiIfindex}
+ ::= { genEquipProtocolsG8032ErpiPortAttributesTable 1 }
+
+GenEquipProtocolsG8032ErpiPortAttributesEntry ::=
+ SEQUENCE {
+ genEquipProtocolsG8032ErpiPortAttributesErpiId
+ INTEGER,
+ genEquipProtocolsG8032ErpiPortAttributesErpiIfindex
+ INTEGER,
+ genEquipProtocolsG8032ErpiPortAttributesActiveState
+ IfMgrTrueFalse,
+ genEquipProtocolsG8032ErpiPortAttributesDataFwdState
+ IfMgrTrueFalse,
+ genEquipProtocolsG8032ErpiPortAttributesDefectState
+ INTEGER,
+ genEquipProtocolsG8032ErpiPortAttributesRapsChannelFwdState
+ IfMgrTrueFalse,
+ genEquipProtocolsG8032ErpiPortAttributesRplLinkBlockState
+ IfMgrTrueFalse,
+ genEquipProtocolsG8032ErpiPortAttributesRxInvalidRapsFrames
+ INTEGER,
+ genEquipProtocolsG8032ErpiPortAttributesRxRapsEvents
+ INTEGER,
+ genEquipProtocolsG8032ErpiPortAttributesRxRapsFrames
+ INTEGER,
+ genEquipProtocolsG8032ErpiPortAttributesFs
+ INTEGER,
+ genEquipProtocolsG8032ErpiPortAttributesMs
+ INTEGER,
+ genEquipProtocolsG8032ErpiPortAttributesNr
+ INTEGER,
+ genEquipProtocolsG8032ErpiPortAttributesRb
+ INTEGER,
+ genEquipProtocolsG8032ErpiPortAttributesSd
+ INTEGER,
+ genEquipProtocolsG8032ErpiPortAttributesSf
+ INTEGER,
+ genEquipProtocolsG8032ErpiPortAttributesCapacityDegRatioThreshold
+ INTEGER,
+ genEquipProtocolsG8032ErpiPortAttributesSpId
+ INTEGER,
+ genEquipProtocolsG8032ErpiPortAttributesTxRapsCntrol
+ IfMgrTrueFalse,
+ genEquipProtocolsG8032ErpiPortAttributesTxRapsEvents
+ INTEGER,
+ genEquipProtocolsG8032ErpiPortAttributesTxRapsFrames
+ INTEGER,
+ genEquipProtocolsG8032ErpiPortAttributesTxRapsFs
+ INTEGER,
+ genEquipProtocolsG8032ErpiPortAttributesTxRapsMs
+ INTEGER,
+ genEquipProtocolsG8032ErpiPortAttributesTxRapsNr
+ INTEGER,
+ genEquipProtocolsG8032ErpiPortAttributesTxRapsRb
+ INTEGER,
+ genEquipProtocolsG8032ErpiPortAttributesTxRapsSd
+ INTEGER,
+ genEquipProtocolsG8032ErpiPortAttributesTxRapsSf
+ INTEGER,
+ genEquipProtocolsG8032ErpiPortAttributesClearCommand
+ INTEGER,
+ genEquipProtocolsG8032ErpiPortAttributesRowStatus
+ RowStatus,
+ genEquipProtocolsG8032ErpiPortAttributesFsCommand
+ INTEGER,
+ genEquipProtocolsG8032ErpiPortAttributesMsCommand
+ INTEGER,
+ }
+
+genEquipProtocolsG8032ErpiPortAttributesErpiId OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Denotes the ERPI ID"
+ ::= { genEquipProtocolsG8032ErpiPortAttributesEntry 1 }
+
+genEquipProtocolsG8032ErpiPortAttributesErpiIfindex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "g8032_erp_port_sp_index"
+ ::= { genEquipProtocolsG8032ErpiPortAttributesEntry 2 }
+
+genEquipProtocolsG8032ErpiPortAttributesActiveState OBJECT-TYPE
+ SYNTAX IfMgrTrueFalse
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Denotes if G8032 port (SP) is active for traffic forwarding or not"
+ ::= { genEquipProtocolsG8032ErpiPortAttributesEntry 3 }
+
+genEquipProtocolsG8032ErpiPortAttributesDataFwdState OBJECT-TYPE
+ SYNTAX IfMgrTrueFalse
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Specifies whether the port is forwarding or blocking data"
+ ::= { genEquipProtocolsG8032ErpiPortAttributesEntry 4 }
+
+genEquipProtocolsG8032ErpiPortAttributesDefectState OBJECT-TYPE
+ SYNTAX INTEGER {
+ no-defect(0),
+ sd-defect(1),
+ sf-defect(2)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Defines the ERPI Port Oper-state derived from port. It is updates when Oper-state is changed."
+ ::= { genEquipProtocolsG8032ErpiPortAttributesEntry 5 }
+
+genEquipProtocolsG8032ErpiPortAttributesRapsChannelFwdState OBJECT-TYPE
+ SYNTAX IfMgrTrueFalse
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Specifies whether the port is forwarding or blocking raps frames"
+ ::= { genEquipProtocolsG8032ErpiPortAttributesEntry 6 }
+
+genEquipProtocolsG8032ErpiPortAttributesRplLinkBlockState OBJECT-TYPE
+ SYNTAX IfMgrTrueFalse
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Specifies whether the RPL is in blocking state. relevant only for RPL owner"
+ ::= { genEquipProtocolsG8032ErpiPortAttributesEntry 7 }
+
+genEquipProtocolsG8032ErpiPortAttributesRxInvalidRapsFrames OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Number of invalid R-APS PDU received"
+ ::= { genEquipProtocolsG8032ErpiPortAttributesEntry 8 }
+
+genEquipProtocolsG8032ErpiPortAttributesRxRapsEvents OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Number of events R-APS PDU received"
+ ::= { genEquipProtocolsG8032ErpiPortAttributesEntry 9 }
+
+genEquipProtocolsG8032ErpiPortAttributesRxRapsFrames OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Number of R-APS PDU received"
+ ::= { genEquipProtocolsG8032ErpiPortAttributesEntry 10 }
+
+genEquipProtocolsG8032ErpiPortAttributesFs OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Number of FS PDU received"
+ ::= { genEquipProtocolsG8032ErpiPortAttributesEntry 11 }
+
+genEquipProtocolsG8032ErpiPortAttributesMs OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Number of MS PDU received"
+ ::= { genEquipProtocolsG8032ErpiPortAttributesEntry 12 }
+
+genEquipProtocolsG8032ErpiPortAttributesNr OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Number of NR R-APS PDU received"
+ ::= { genEquipProtocolsG8032ErpiPortAttributesEntry 13 }
+
+genEquipProtocolsG8032ErpiPortAttributesRb OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Number of RB R-APS PDU received"
+ ::= { genEquipProtocolsG8032ErpiPortAttributesEntry 14 }
+
+genEquipProtocolsG8032ErpiPortAttributesSd OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Number of SD R-APS PDU received"
+ ::= { genEquipProtocolsG8032ErpiPortAttributesEntry 15 }
+
+genEquipProtocolsG8032ErpiPortAttributesSf OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Number of SF R-APS PDU received"
+ ::= { genEquipProtocolsG8032ErpiPortAttributesEntry 17 }
+
+genEquipProtocolsG8032ErpiPortAttributesCapacityDegRatioThreshold OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The capacity degradation threshold, in percentage,
+ from which SD is indicated from this ERPI Port"
+ ::= { genEquipProtocolsG8032ErpiPortAttributesEntry 18 }
+
+genEquipProtocolsG8032ErpiPortAttributesSpId OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Service Point ID"
+ ::= { genEquipProtocolsG8032ErpiPortAttributesEntry 19 }
+
+genEquipProtocolsG8032ErpiPortAttributesTxRapsCntrol OBJECT-TYPE
+ SYNTAX IfMgrTrueFalse
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "When value is False, R-APS are not transmitted by ERPI Port"
+ ::= { genEquipProtocolsG8032ErpiPortAttributesEntry 20 }
+
+genEquipProtocolsG8032ErpiPortAttributesTxRapsEvents OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Number of events R-APS PDU transmitted"
+ ::= { genEquipProtocolsG8032ErpiPortAttributesEntry 21 }
+
+genEquipProtocolsG8032ErpiPortAttributesTxRapsFrames OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Number of Total R-APS PDU transmitted"
+ ::= { genEquipProtocolsG8032ErpiPortAttributesEntry 22 }
+
+genEquipProtocolsG8032ErpiPortAttributesTxRapsFs OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Number of FS R-APS PDU transmitted"
+ ::= { genEquipProtocolsG8032ErpiPortAttributesEntry 23 }
+
+genEquipProtocolsG8032ErpiPortAttributesTxRapsMs OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Number of MS R-APS PDU transmitted"
+ ::= { genEquipProtocolsG8032ErpiPortAttributesEntry 24 }
+
+genEquipProtocolsG8032ErpiPortAttributesTxRapsNr OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Number of NR R-APS PDU transmitted"
+ ::= { genEquipProtocolsG8032ErpiPortAttributesEntry 25 }
+
+genEquipProtocolsG8032ErpiPortAttributesTxRapsRb OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Number of RB R-APS PDU transmitted"
+ ::= { genEquipProtocolsG8032ErpiPortAttributesEntry 26 }
+
+genEquipProtocolsG8032ErpiPortAttributesTxRapsSd OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Number of SD R-APS PDU transmitted"
+ ::= { genEquipProtocolsG8032ErpiPortAttributesEntry 27 }
+
+genEquipProtocolsG8032ErpiPortAttributesTxRapsSf OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Number of SF R-APS PDU transmitted"
+ ::= { genEquipProtocolsG8032ErpiPortAttributesEntry 28 }
+
+genEquipProtocolsG8032ErpiPortAttributesClearCommand OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Clear Command"
+ ::= { genEquipProtocolsG8032ErpiPortAttributesEntry 29 }
+
+genEquipProtocolsG8032ErpiPortAttributesRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Table Mib Row Status"
+ ::= { genEquipProtocolsG8032ErpiPortAttributesEntry 30 }
+
+genEquipProtocolsG8032ErpiPortAttributesFsCommand OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Force Switch (FS)"
+ ::= { genEquipProtocolsG8032ErpiPortAttributesEntry 31 }
+
+genEquipProtocolsG8032ErpiPortAttributesMsCommand OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Manual Switch (MS)"
+ ::= { genEquipProtocolsG8032ErpiPortAttributesEntry 32 }
+
+genEquipProtocolsSoam OBJECT IDENTIFIER ::= {genEquipProtocols 4}
+
+--
+-- SOAM MEP Table - dot1ag-cfm-mep-table
+--
+
+genEquipProtocolsSoamMepTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipProtocolsSoamMepEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "A table containg MEP attributes."
+ ::= { genEquipProtocolsSoam 10 }
+
+genEquipProtocolsSoamMepEntry OBJECT-TYPE
+ SYNTAX GenEquipProtocolsSoamMepEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "A table entry containg MEP attributes."
+ INDEX { genEquipProtocolsSoamMepMdIndex, genEquipProtocolsSoamMepMaIndex, genEquipProtocolsSoamMepMepIndentifier }
+ ::= { genEquipProtocolsSoamMepTable 1 }
+
+GenEquipProtocolsSoamMepEntry ::=
+ SEQUENCE {
+ genEquipProtocolsSoamMepMdIndex
+ INTEGER,
+ genEquipProtocolsSoamMepMaIndex
+ INTEGER,
+ genEquipProtocolsSoamMepMepIndentifier
+ INTEGER,
+ genEquipProtocolsSoamMepSpId
+ INTEGER,
+ genEquipProtocolsSoamMepLastSessionLbmOut
+ INTEGER,
+ genEquipProtocolsSoamMepLastSessionlbmToSend
+ INTEGER,
+ genEquipProtocolsSoamMepLastSessionLbrIn
+ INTEGER,
+ genEquipProtocolsSoamMepLastSessionlbState
+ LBState,
+ genEquipProtocolsSoamMepLbmOut
+ INTEGER
+ }
+
+genEquipProtocolsSoamMepMdIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "MD Index"
+ ::= { genEquipProtocolsSoamMepEntry 1 }
+
+genEquipProtocolsSoamMepMaIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "MA/MEG Index"
+ ::= { genEquipProtocolsSoamMepEntry 2 }
+
+genEquipProtocolsSoamMepMepIndentifier OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "MEP ID"
+ ::= { genEquipProtocolsSoamMepEntry 3 }
+
+genEquipProtocolsSoamMepSpId OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Service Point ID"
+ ::= { genEquipProtocolsSoamMepEntry 4 }
+
+genEquipProtocolsSoamMepLastSessionLbmOut OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Number of LBM frames transmitted during the current/last session"
+ ::= { genEquipProtocolsSoamMepEntry 5 }
+
+genEquipProtocolsSoamMepLastSessionlbmToSend OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Number of LBM frames left to send in the session"
+ ::= { genEquipProtocolsSoamMepEntry 6 }
+
+genEquipProtocolsSoamMepLastSessionLbrIn OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Number of LBR messages received during the current/last session"
+ ::= { genEquipProtocolsSoamMepEntry 7 }
+
+genEquipProtocolsSoamMepLastSessionlbState OBJECT-TYPE
+ SYNTAX LBState
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Specifies the loopback session State"
+ ::= { genEquipProtocolsSoamMepEntry 8 }
+
+genEquipProtocolsSoamMepLbmOut OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Specifies the mumber of the LBM frames transmitted"
+ ::= { genEquipProtocolsSoamMepEntry 9 }
+
+--
+-- SOAM MA/MEG Network Table - dot1ag-cfm-ma-mef-net-table
+--
+
+genEquipProtocolsSoamMegTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipProtocolsSoamMegEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "A table containing SOAM MA/MEG network identical attributes common to 802.1ag."
+ ::= { genEquipProtocolsSoam 11 }
+
+genEquipProtocolsSoamMegEntry OBJECT-TYPE
+ SYNTAX GenEquipProtocolsSoamMegEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "A table entry containing SOAM MA/MEG network identical attributes common to 802.1ag."
+ INDEX { genEquipProtocolsSoamMegMdIndex, genEquipProtocolsSoamMegMaIndex }
+ ::= { genEquipProtocolsSoamMegTable 1 }
+
+GenEquipProtocolsSoamMegEntry ::=
+ SEQUENCE {
+ genEquipProtocolsSoamMegMdIndex
+ INTEGER,
+ genEquipProtocolsSoamMegMaIndex
+ INTEGER,
+ genEquipProtocolsSoamMegServiceId
+ INTEGER
+ }
+
+genEquipProtocolsSoamMegMdIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "MD Index"
+ ::= { genEquipProtocolsSoamMegEntry 1 }
+
+genEquipProtocolsSoamMegMaIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "MA/MEG Index"
+ ::= { genEquipProtocolsSoamMegEntry 2 }
+
+genEquipProtocolsSoamMegServiceId OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Service ID"
+ ::= { genEquipProtocolsSoamMegEntry 3 }
+
+
+-- TDM Trails
+genEquipTdmTrails OBJECT IDENTIFIER ::= {genEquipServices 2}
+
+genEquipTdmTrailsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipTdmTrailsEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "TDM Trails configuration and status table."
+ ::= { genEquipTdmTrails 1 }
+
+genEquipTdmTrailsEntry OBJECT-TYPE
+ SYNTAX GenEquipTdmTrailsEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "TDM Trails PM table."
+ INDEX { genEquipTdmTrailID }
+ ::= { genEquipTdmTrailsTable 1 }
+
+GenEquipTdmTrailsEntry ::=
+ SEQUENCE {
+ genEquipTdmTrailID
+ DisplayString,
+ genEquipTdmTrailDescr
+ DisplayString,
+ genEquipTdmTrailProtected
+ INTEGER,
+ genEquipTdmTrailAcmPrio
+ INTEGER,
+ genEquipTdmTrailOperStatus
+ INTEGER,
+ genEquipTdmTrailAlarmStatus
+ INTEGER,
+ genEquipTdmTrailSrcSlot
+ INTEGER,
+ genEquipTdmTrailSrcType
+ TrailIfType,
+ genEquipTdmTrailSrcNum
+ INTEGER,
+ genEquipTdmTrailDest1Slot
+ INTEGER,
+ genEquipTdmTrailDest1Type
+ TrailIfType,
+ genEquipTdmTrailDest1Num
+ INTEGER,
+ genEquipTdmTrailDest2Slot
+ INTEGER,
+ genEquipTdmTrailDest2Type
+ TrailIfType,
+ genEquipTdmTrailDest2Num
+ INTEGER,
+ genEquipTdmTrailProtectedForceActive
+ TrailProtectedType,
+ genEquipTdmTrailProtectedActiveTrail
+ TrailProtectedType,
+ genEquipTdmTrailProtectedNumOfSwitches
+ INTEGER,
+ genEquipTdmTrailPrimaryPathAlarmStatus
+ INTEGER,
+ genEquipTdmTrailSecondaryPathAlarmStatus
+ INTEGER,
+ genEquipTdmTrailRowStatus
+ RowStatus
+}
+
+genEquipTdmTrailID OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The Trail ID. This parameter is the index of the table."
+::= { genEquipTdmTrailsEntry 1 }
+
+genEquipTdmTrailDescr OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Trail description."
+::= { genEquipTdmTrailsEntry 2 }
+
+genEquipTdmTrailProtected OBJECT-TYPE
+ SYNTAX INTEGER {
+ unProtected(0),
+ protected(1),
+ protectedAbr(2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This parameter indicates whether the trail is protected or not."
+::= { genEquipTdmTrailsEntry 3 }
+
+genEquipTdmTrailAcmPrio OBJECT-TYPE
+ SYNTAX INTEGER {
+ low(0),
+ high(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The ACM priority of the trail. In case of High priority TDM trail, ACM is enabled on the link and there is a reduction
+ of the link capacity, this trail will be prioritized before the low priority trails to be dropped."
+::= { genEquipTdmTrailsEntry 4 }
+
+genEquipTdmTrailOperStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ reserved(0),
+ operational(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The status of the TDM trail. in operational case, the trail is active/enabled and send alarms."
+::= { genEquipTdmTrailsEntry 5 }
+
+genEquipTdmTrailAlarmStatus OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The alarm status of the trail active path.
+ The value is a Bit Map: Id-Mismatch(0x01),
+ Excessive-Ber(0x02), Signal-Degrade-Ber(0x04),
+ Invalid-Trail-Status(0x08), Signal-Failure(0x10), RDI-Detected(0x20)."
+::= { genEquipTdmTrailsEntry 6 }
+
+genEquipTdmTrailSrcSlot OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Trail source slot number."
+::= { genEquipTdmTrailsEntry 7 }
+
+genEquipTdmTrailSrcType OBJECT-TYPE
+ SYNTAX TrailIfType
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The type of the source interface of the trail line(0), radio(1),stm-1-oc-3(2), sync(4)."
+::= { genEquipTdmTrailsEntry 8 }
+
+genEquipTdmTrailSrcNum OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The interface number, for example E1 number 5. in case of a line."
+::= { genEquipTdmTrailsEntry 9 }
+
+genEquipTdmTrailDest1Slot OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The slot destination of the trail."
+::= { genEquipTdmTrailsEntry 10 }
+
+genEquipTdmTrailDest1Type OBJECT-TYPE
+ SYNTAX TrailIfType
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The interface type destination of the trail."
+::= { genEquipTdmTrailsEntry 11 }
+
+genEquipTdmTrailDest1Num OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The destination interface number."
+::= { genEquipTdmTrailsEntry 12 }
+
+genEquipTdmTrailDest2Slot OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "A secondary slot number that is being used when protection is enabled. "
+::= { genEquipTdmTrailsEntry 13 }
+
+genEquipTdmTrailDest2Type OBJECT-TYPE
+ SYNTAX TrailIfType
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "A secondary interface type that is being used when protection is enabled."
+::= { genEquipTdmTrailsEntry 14 }
+
+genEquipTdmTrailDest2Num OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "A secondary interface number that is being used when protection is enabled."
+::= { genEquipTdmTrailsEntry 15 }
+
+genEquipTdmTrailProtectedForceActive OBJECT-TYPE
+ SYNTAX TrailProtectedType
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Force active of the primary or the secondary trails."
+::= { genEquipTdmTrailsEntry 16 }
+
+genEquipTdmTrailProtectedActiveTrail OBJECT-TYPE
+ SYNTAX TrailProtectedType
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The trail current active path. That tells us Who is the active trail."
+::= { genEquipTdmTrailsEntry 17 }
+
+genEquipTdmTrailProtectedNumOfSwitches OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The value represent the number of switches in SNCP between the primary and secondary trails.
+ Setting this value to 0, clears this counter"
+::= { genEquipTdmTrailsEntry 18 }
+
+genEquipTdmTrailPrimaryPathAlarmStatus OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The alarm status of the trail primary path.
+ The value is a Bit Map: Id-Mismatch(0x01),
+ Excessive-Ber(0x02), Signal-Degrade-Ber(0x04),
+ Invalid-Trail-Status(0x08), Signal-Failure(0x10), RDI-Detected(0x20)."
+::= { genEquipTdmTrailsEntry 19 }
+
+genEquipTdmTrailSecondaryPathAlarmStatus OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The alarm status of the trail secondary path.
+ The value is a Bit Map: Id-Mismatch(0x01),
+ Excessive-Ber(0x02), Signal-Degrade-Ber(0x04),
+ Invalid-Trail-Status(0x08), Signal-Failure(0x10), RDI-Detected(0x20)."
+::= { genEquipTdmTrailsEntry 20 }
+
+genEquipTdmTrailRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The Row status of the entry."
+::= { genEquipTdmTrailsEntry 30 }
+
+-- Protected trail force active all trails command
+genEquipTdmTrailsProtectedForceActiveAllCmd OBJECT-TYPE
+ SYNTAX TrailProtectedType
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Force all active trails to be either primary or secondary."
+::= { genEquipTdmTrails 2 }
+
+-- Protected trail force operational or reserved all trails command
+genEquipTdmTrailsProtectedForceOperationalOrReservedCmd OBJECT-TYPE
+ SYNTAX INTEGER {
+ reserved(0),
+ operational(1),
+ idle(30)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Force all active trails to be either operational or reserved."
+::= { genEquipTdmTrails 3 }
+
+genEquipTdmTrailsProtectedRevertiveSwitchTimeout OBJECT-TYPE
+ SYNTAX INTEGER (0..1800)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The revertive switch timeout in seconds for revertive protected trails."
+::= { genEquipTdmTrails 4 }
+
+genEquipTdmTrailsSwitchCounterClear OBJECT-TYPE
+ SYNTAX OffOn
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This parameter will clear the counter for protected switches."
+::= { genEquipTdmTrails 5 }
+
+genEquipTdmTrailsDeleteAllTrails OBJECT-TYPE
+ SYNTAX OffOn
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This parameter will delete all existing trails."
+::= { genEquipTdmTrails 6 }
+
+-- Synchronization
+genEquipSynchronization OBJECT IDENTIFIER ::= {genEquipServices 3}
+
+genEquipSynchronizationSrcTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipSynchronizationSrcEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Synchronization source table."
+ ::= { genEquipSynchronization 1 }
+
+genEquipSynchronizationSrcEntry OBJECT-TYPE
+ SYNTAX GenEquipSynchronizationSrcEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Synchronization source table."
+ INDEX { genEquipSynchronizationSrcPriority }
+ ::= { genEquipSynchronizationSrcTable 1 }
+
+GenEquipSynchronizationSrcEntry ::=
+ SEQUENCE {
+ genEquipSynchronizationSrcPriority
+ INTEGER,
+ genEquipSynchronizationSrcSlot
+ INTEGER,
+ genEquipSynchronizationSrcType
+ INTEGER,
+ genEquipSynchronizationSrcNum
+ INTEGER,
+ genEquipSynchronizationSrcValid
+ INTEGER,
+ genEquipSynchronizationSrcTrail
+ EnableDisable,
+ genEquipSynchronizationSrcAdmin
+ EnableDisable,
+ genEquipSynchronizationSrcQuality
+ INTEGER,
+ genEquipSynchronizationSrcReceivedSSM
+ INTEGER,
+ genEquipSynchronizationSrcQualityStatus
+ INTEGER
+
+}
+
+genEquipSynchronizationSrcPriority OBJECT-TYPE
+ SYNTAX INTEGER (1..8)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The source for system synchronization (primary, seconday)."
+::= { genEquipSynchronizationSrcEntry 1 }
+
+genEquipSynchronizationSrcSlot OBJECT-TYPE
+ SYNTAX SlotId
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The slot number of the sync source (1..6).
+ Possible values:
+ - standalone(0)
+ - slot1(1)
+ - slot2(2)
+ - slot3(3)
+ - slot4(4)
+ - slot5(5)
+ - slot6(6)"
+::= { genEquipSynchronizationSrcEntry 2 }
+
+genEquipSynchronizationSrcType OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown(-1),
+ line(0),
+ radio-ch(1),
+ stm-vc(2),
+ pw(3),
+ stm-signal(4),
+ ether(5),
+ pw-reference-clock(6)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The interface type (line (PDH), Radio, STM-1/OC-3), or signal coming from the PW card."
+::= { genEquipSynchronizationSrcEntry 3 }
+
+genEquipSynchronizationSrcNum OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The sync source number: VC in STM-1/OC-3, Radio channel in case the interface is Radio, or E1 number in
+ case the interface is PDH (E1s)."
+::= { genEquipSynchronizationSrcEntry 4 }
+
+genEquipSynchronizationSrcValid OBJECT-TYPE
+ SYNTAX INTEGER {
+ not-valid(0),
+ valid(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "This paremter is the source status, if the source if valid or not.
+ In case it is valid, it means that the clock being extracted from the source is ok and can be used.
+ In case it is not-valid the source is not in use, each interface will have it's own clock."
+::= { genEquipSynchronizationSrcEntry 5 }
+
+genEquipSynchronizationSrcTrail OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This parameter indicates whether the synchronization source is the
+ signal of an existing co-located TDM trail used for traffic.
+ Enabling this parameter in an interface which does not belong to a trail will fail,
+ as well as disabling it for an interface which belongs to a trail."
+::= { genEquipSynchronizationSrcEntry 6 }
+
+genEquipSynchronizationSrcAdmin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Admin state of the sync source (the sync source is enabled or disabled)."
+::= { genEquipSynchronizationSrcEntry 7 }
+
+genEquipSynchronizationSrcQuality OBJECT-TYPE
+ SYNTAX INTEGER {
+ automatic(0),
+ prs(1),
+ g811(2),
+ transit-node(3),
+ ssu-a(4),
+ unknown(5),
+ stratum2(7),
+ ssu-b(8),
+ stratum3(10),
+ g813-8262(11),
+ smc(12),
+ stratum3e(13),
+ do-not-use (15)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "parameter configures the quality of the incoming clock signal."
+::= { genEquipSynchronizationSrcEntry 8 }
+
+genEquipSynchronizationSrcReceivedSSM OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "This parameter shows the current value of the received SSM messages."
+::= { genEquipSynchronizationSrcEntry 9 }
+
+genEquipSynchronizationSrcQualityStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ automatic(0),
+ prs(1),
+ g811(2),
+ transit-node(3),
+ ssu-a(4),
+ unknown(5),
+ stratum2(7),
+ ssu-b(8),
+ stratum3(10),
+ g813-8262(11),
+ smc(12),
+ stratum3e(13),
+ do-not-use(15),
+ failure(16)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "This parameter shows the current quality level of the interface."
+::= { genEquipSynchronizationSrcEntry 10 }
+
+-- PW services configuration
+genEquipServicesPW OBJECT IDENTIFIER ::= {genEquipServices 4}
+
+genEquipServicesPWBundlesTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipServicesPWBundlesEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table allows configuration of DS0 bundles.
+ Notice that the bundle description is not located in this table but in table genEquipServicesPWBundlesDescriptionTable."
+ ::= { genEquipServicesPW 1 }
+
+genEquipServicesPWBundlesEntry OBJECT-TYPE
+ SYNTAX GenEquipServicesPWBundlesEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table allows configuration of DS0 bundles.
+ Notice that the bundle description is not located in this table but in table genEquipServicesPWBundlesDescriptionTable."
+ INDEX { genEquipServicesPWBundlesDs0List, genEquipServicesPWBundlesBundleId }
+ ::= { genEquipServicesPWBundlesTable 1 }
+
+GenEquipServicesPWBundlesEntry ::=
+ SEQUENCE {
+ genEquipServicesPWBundlesBundleId
+ INTEGER,
+ genEquipServicesPWBundlesDs0List
+ INTEGER,
+ genEquipServicesPWBundlesRowStatus
+ RowStatus
+}
+
+genEquipServicesPWBundlesBundleId OBJECT-TYPE
+ SYNTAX INTEGER (1..496)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Unique DS0 bundle ID."
+::= { genEquipServicesPWBundlesEntry 1 }
+
+genEquipServicesPWBundlesDs0List OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "DS0 slot number belonging to a bundle."
+
+::= { genEquipServicesPWBundlesEntry 2 }
+
+genEquipServicesPWBundlesRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This value is the status of the entry."
+::= { genEquipServicesPWBundlesEntry 30 }
+
+-- genEquipServicesPWBundlesDescriptionTable
+genEquipServicesPWBundlesDescriptionTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipServicesPWBundlesDescriptionEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table allows configuration of DS0 bundles description.
+ Notice that the bundle configuration itself is not located in this table but in table genEquipServicesPWBundlesTable."
+ ::= { genEquipServicesPW 2 }
+
+genEquipServicesPWBundlesDescriptionEntry OBJECT-TYPE
+ SYNTAX GenEquipServicesPWBundlesDescriptionEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table allows configuration of DS0 bundles description.
+ Notice that the bundle configuration itself is not located in this table but in table genEquipServicesPWBundlesTable."
+ INDEX { genEquipServicesPWBundlesDescriptionBundleId }
+ ::= { genEquipServicesPWBundlesDescriptionTable 1 }
+
+GenEquipServicesPWBundlesDescriptionEntry ::=
+ SEQUENCE {
+ genEquipServicesPWBundlesDescriptionBundleId
+ INTEGER,
+ genEquipServicesPWBundlesDescriptionBundleDesc
+ DisplayString,
+ genEquipServicesPWBundlesDescriptionBundleAdmin
+ EnableDisable,
+ genEquipServicesPWBundlesDescriptionBundleOperStatus
+ INTEGER,
+ genEquipServicesPWBundlesDescriptionBundleTdmPort
+ INTEGER,
+ genEquipServicesPWBundlesDescriptionRowStatus
+ RowStatus
+}
+
+genEquipServicesPWBundlesDescriptionBundleId OBJECT-TYPE
+ SYNTAX INTEGER (1..496)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Unique DS0 bundle ID."
+::= { genEquipServicesPWBundlesDescriptionEntry 1 }
+
+genEquipServicesPWBundlesDescriptionBundleDesc OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "DS0 bundle description."
+::= { genEquipServicesPWBundlesDescriptionEntry 2 }
+
+genEquipServicesPWBundlesDescriptionBundleAdmin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Admin."
+::= { genEquipServicesPWBundlesDescriptionEntry 3 }
+
+genEquipServicesPWBundlesDescriptionBundleOperStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ up(1),
+ down(2)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Operational status."
+::= { genEquipServicesPWBundlesDescriptionEntry 4 }
+
+genEquipServicesPWBundlesDescriptionBundleTdmPort OBJECT-TYPE
+ SYNTAX INTEGER (1..16)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "TDM port from which the channels are assigned to the bundle."
+::= { genEquipServicesPWBundlesDescriptionEntry 5 }
+
+genEquipServicesPWBundlesDescriptionRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This value is the status of the entry."
+::= { genEquipServicesPWBundlesDescriptionEntry 30 }
+
+-- PW PSN tunnels Table
+genEquipServicesPWPSNTunnelsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipServicesPWPSNTunnelsEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table allows configuration of PSN encapsulations meant for pseudowire services."
+ ::= { genEquipServicesPW 3 }
+
+genEquipServicesPWPSNTunnelsEntry OBJECT-TYPE
+ SYNTAX GenEquipServicesPWPSNTunnelsEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table allows configuration of PSN encapsulations meant for pseudowire services."
+ INDEX { genEquipServicesPWPSNTunnelsSlotNumber, genEquipServicesPWPSNTunnelsTunnelId }
+ ::= { genEquipServicesPWPSNTunnelsTable 1 }
+
+GenEquipServicesPWPSNTunnelsEntry ::=
+ SEQUENCE {
+ genEquipServicesPWPSNTunnelsSlotNumber
+ INTEGER,
+ genEquipServicesPWPSNTunnelsTunnelId
+ INTEGER,
+ genEquipServicesPWPSNTunnelsPsnType
+ INTEGER,
+ genEquipServicesPWPSNTunnelsSVid
+ INTEGER,
+ genEquipServicesPWPSNTunnelsCVid
+ EnableDisable,
+ genEquipServicesPWPSNTunnelsPBits
+ INTEGER,
+ genEquipServicesPWPSNTunnelsDestIpAddr
+ IpAddress,
+ genEquipServicesPWPSNTunnelsDestIpSubnet
+ IpAddress,
+ genEquipServicesPWPSNTunnelsNextHopIp
+ IpAddress,
+ genEquipServicesPWPSNTunnelsTosDscp
+ INTEGER,
+ genEquipServicesPWPSNTunnelsRemoteMacAddr
+ OCTET STRING,
+ genEquipServicesPWPSNTunnelsSourceIpAddr
+ IpAddress,
+ genEquipServicesPWPSNTunnelsSourceMacAddr
+ OCTET STRING,
+-- New part
+ genEquipServicesPWPSNTunnelsStatus
+ DownUp,
+ genEquipServicesPWPSNTunnelsSourceMPLSLabel
+ INTEGER,
+ genEquipServicesPWPSNTunnelsDestinationMPLSLabel
+ INTEGER,
+ genEquipServicesPWPSNTunnelsMPLSexp
+ INTEGER,
+ genEquipServicesPWPSNTunnelsVlanType
+ PWTunnelVlanType,
+ genEquipServicesPWPSNTunnelsVid
+ INTEGER,
+ genEquipServicesPWPSNTunnelsMAid
+ INTEGER,
+
+ genEquipServicesPWPSNTunnelsRowStatus
+ RowStatus
+}
+
+genEquipServicesPWPSNTunnelsSlotNumber OBJECT-TYPE
+ SYNTAX INTEGER (2..12)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Slot number where the relevant PW card is inserted."
+::= { genEquipServicesPWPSNTunnelsEntry 1 }
+
+genEquipServicesPWPSNTunnelsTunnelId OBJECT-TYPE
+ SYNTAX INTEGER (1..512)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "PSN tunnel ID."
+::= { genEquipServicesPWPSNTunnelsEntry 2 }
+
+genEquipServicesPWPSNTunnelsPsnType OBJECT-TYPE
+ SYNTAX INTEGER {
+ udpip(0),
+ ethernet(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Psn type supported by this tunnel."
+
+::= { genEquipServicesPWPSNTunnelsEntry 3 }
+
+genEquipServicesPWPSNTunnelsSVid OBJECT-TYPE
+ SYNTAX INTEGER (0..4091)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "PSN Tunnel S-VLAN Id."
+::= { genEquipServicesPWPSNTunnelsEntry 4 }
+
+genEquipServicesPWPSNTunnelsCVid OBJECT-TYPE
+ SYNTAX INTEGER (0..4091)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "PSN Tunnel C-VLAN Id."
+::= { genEquipServicesPWPSNTunnelsEntry 5 }
+
+genEquipServicesPWPSNTunnelsPBits OBJECT-TYPE
+ SYNTAX INTEGER (0..7)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "PSN Tunnel P-bits."
+::= { genEquipServicesPWPSNTunnelsEntry 6 }
+
+genEquipServicesPWPSNTunnelsDestIpAddr OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Destination IP Address for UDP/IP PSN tunnel."
+::= { genEquipServicesPWPSNTunnelsEntry 7 }
+
+genEquipServicesPWPSNTunnelsDestIpSubnet OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Destination IP Subnet for UDP/IP PSN tunnel."
+::= { genEquipServicesPWPSNTunnelsEntry 8 }
+
+genEquipServicesPWPSNTunnelsNextHopIp OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Next hop IP Address for UDP/IP PSN tunnel."
+::= { genEquipServicesPWPSNTunnelsEntry 9 }
+
+genEquipServicesPWPSNTunnelsTosDscp OBJECT-TYPE
+ SYNTAX INTEGER (0..63)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "PSN Tunnel ToS (DSCP)."
+::= { genEquipServicesPWPSNTunnelsEntry 10 }
+
+genEquipServicesPWPSNTunnelsRemoteMacAddr OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Remote MAC Adress."
+::= { genEquipServicesPWPSNTunnelsEntry 11 }
+
+genEquipServicesPWPSNTunnelsSourceIpAddr OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Source IP Address."
+::= { genEquipServicesPWPSNTunnelsEntry 12 }
+
+genEquipServicesPWPSNTunnelsSourceMacAddr OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Source MAC Address."
+::= { genEquipServicesPWPSNTunnelsEntry 13 }
+
+genEquipServicesPWPSNTunnelsStatus OBJECT-TYPE
+ SYNTAX DownUp
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "PSN tunnel admin."
+::= { genEquipServicesPWPSNTunnelsEntry 14 }
+
+genEquipServicesPWPSNTunnelsSourceMPLSLabel OBJECT-TYPE
+ SYNTAX INTEGER (16..1048575)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Source MPLS Label."
+::= { genEquipServicesPWPSNTunnelsEntry 15 }
+
+genEquipServicesPWPSNTunnelsDestinationMPLSLabel OBJECT-TYPE
+ SYNTAX INTEGER (16..1048575)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Destination MPLS label."
+::= { genEquipServicesPWPSNTunnelsEntry 16 }
+
+genEquipServicesPWPSNTunnelsMPLSexp OBJECT-TYPE
+ SYNTAX INTEGER (0..7)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "MPLS Experimental field."
+::= { genEquipServicesPWPSNTunnelsEntry 17 }
+
+genEquipServicesPWPSNTunnelsVlanType OBJECT-TYPE
+ SYNTAX PWTunnelVlanType
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "VLAN type supported by this PSN tunnel (S-VLAN or C-VLAN)."
+::= { genEquipServicesPWPSNTunnelsEntry 18 }
+
+genEquipServicesPWPSNTunnelsVid OBJECT-TYPE
+ SYNTAX INTEGER (0..4094)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "PSN Tunnel VLAN ID."
+::= { genEquipServicesPWPSNTunnelsEntry 19 }
+
+genEquipServicesPWPSNTunnelsMAid OBJECT-TYPE
+ SYNTAX INTEGER (0..128)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Maintenance Association Id."
+::= { genEquipServicesPWPSNTunnelsEntry 20 }
+
+
+genEquipServicesPWPSNTunnelsRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This value is the status of the entry."
+::= { genEquipServicesPWPSNTunnelsEntry 30 }
+
+-- PW Profiles Configuration Table
+genEquipServicesPWProfilesTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipServicesPWProfilesEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table allows configuration of pseudowire profiles.
+ These profiles are used when configuring PW services in table genEquipServicesPWServiceTable."
+ ::= { genEquipServicesPW 4 }
+
+genEquipServicesPWProfilesEntry OBJECT-TYPE
+ SYNTAX GenEquipServicesPWProfilesEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table allows configuration of pseudowire profiles.
+ These profiles are used when configuring PW services in table genEquipServicesPWServiceTable."
+ INDEX { genEquipServicesPWProfilesPWProfileId }
+ ::= { genEquipServicesPWProfilesTable 1 }
+
+GenEquipServicesPWProfilesEntry ::=
+ SEQUENCE {
+ genEquipServicesPWProfilesPWProfileId
+ INTEGER,
+ genEquipServicesPWProfilesPayloadSize
+ INTEGER,
+ genEquipServicesPWProfilesJitterBufferDepth
+ INTEGER,
+ genEquipServicesPWProfilesLopsDetection
+ EnableDisable,
+ genEquipServicesPWProfilesRtpHeaderUsed
+ NoYes,
+ genEquipServicesPWProfilesRtpTimestampMode
+ PWRtpTimeStampMode,
+ genEquipServicesPWProfilesRtpTimestampAbsFactor
+ INTEGER,
+ genEquipServicesPWProfilesPayloadSuppression
+ EnableDisable,
+ genEquipServicesPWProfilesPayloadType
+ INTEGER,
+ genEquipServicesPWProfilesConseqPacketsInSync
+ INTEGER,
+ genEquipServicesPWProfilesConseqMissPktsOutSync
+ INTEGER,
+ genEquipServicesPWProfilesPktLossTimeWindow
+ INTEGER,
+ genEquipServicesPWProfilesExcessivePktLossThresh
+ INTEGER,
+ genEquipServicesPWProfilesAlarmThresh
+ INTEGER,
+ genEquipServicesPWProfilesClearAlarmThresh
+ INTEGER,
+ genEquipServicesPWProfilesMissingPktsToSes
+ INTEGER,
+ genEquipServicesPWProfilesDs0Filler
+ INTEGER,
+ genEquipServicesPWProfilesCasAlarmPattern
+ INTEGER,
+ genEquipServicesPWProfilesRowStatus
+ RowStatus
+}
+
+genEquipServicesPWProfilesPWProfileId OBJECT-TYPE
+ SYNTAX INTEGER (1..64)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Unique PW profile ID."
+::= { genEquipServicesPWProfilesEntry 1 }
+
+genEquipServicesPWProfilesPayloadSize OBJECT-TYPE
+ SYNTAX INTEGER (0..1500)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Payload size in bytes."
+::= { genEquipServicesPWProfilesEntry 2 }
+
+genEquipServicesPWProfilesJitterBufferDepth OBJECT-TYPE
+ SYNTAX INTEGER (1..32)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Jitter buffer depth (in milliseconds) to allow accommodation to the PSN-specific packet delay variation"
+::= { genEquipServicesPWProfilesEntry 3 }
+
+genEquipServicesPWProfilesLopsDetection OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "If enabled, LOPS detection is supported."
+::= { genEquipServicesPWProfilesEntry 4 }
+
+genEquipServicesPWProfilesRtpHeaderUsed OBJECT-TYPE
+ SYNTAX NoYes
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "If set to False: an RTP header is not pre-pended to the TDM packet."
+::= { genEquipServicesPWProfilesEntry 5 }
+
+genEquipServicesPWProfilesRtpTimestampMode OBJECT-TYPE
+ SYNTAX PWRtpTimeStampMode
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "RTP timestamp mode"
+::= { genEquipServicesPWProfilesEntry 6 }
+
+genEquipServicesPWProfilesRtpTimestampAbsFactor OBJECT-TYPE
+ SYNTAX INTEGER (1..65535)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Multiplication factor for 8KHz units in absolute mode of RTP timestamping."
+::= { genEquipServicesPWProfilesEntry 7 }
+
+genEquipServicesPWProfilesPayloadSuppression OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Payload suppression."
+::= { genEquipServicesPWProfilesEntry 8 }
+
+genEquipServicesPWProfilesPayloadType OBJECT-TYPE
+ SYNTAX INTEGER (1..123)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Payload type."
+::= { genEquipServicesPWProfilesEntry 9 }
+
+genEquipServicesPWProfilesConseqPacketsInSync OBJECT-TYPE
+ SYNTAX INTEGER (1..10)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Number of consecutive packets with sequential sequence numbers required to exit LOPS."
+::= { genEquipServicesPWProfilesEntry 10 }
+
+genEquipServicesPWProfilesConseqMissPktsOutSync OBJECT-TYPE
+ SYNTAX INTEGER (1..15)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Number of consecutive missing packets required to enter LOPS."
+::= { genEquipServicesPWProfilesEntry 11 }
+
+genEquipServicesPWProfilesPktLossTimeWindow OBJECT-TYPE
+ SYNTAX INTEGER (1..65535)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Time for computing average packet loss rate to detect excessive packet loss."
+::= { genEquipServicesPWProfilesEntry 12 }
+
+genEquipServicesPWProfilesExcessivePktLossThresh OBJECT-TYPE
+ SYNTAX INTEGER (0..100)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Alarm threshold (in percent) for excessive packet loss."
+::= { genEquipServicesPWProfilesEntry 13 }
+
+genEquipServicesPWProfilesAlarmThresh OBJECT-TYPE
+ SYNTAX INTEGER (1..65535)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Delay (in msecs) for persistent alarm setting."
+::= { genEquipServicesPWProfilesEntry 14 }
+
+genEquipServicesPWProfilesClearAlarmThresh OBJECT-TYPE
+ SYNTAX INTEGER (1..65535)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Delay (in msecs) for persistent alarm clearing."
+::= { genEquipServicesPWProfilesEntry 15 }
+
+genEquipServicesPWProfilesMissingPktsToSes OBJECT-TYPE
+ SYNTAX INTEGER (1..100)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Percent of missing packets detected in 1 second window to cause SES to be counted."
+::= { genEquipServicesPWProfilesEntry 16 }
+
+genEquipServicesPWProfilesDs0Filler OBJECT-TYPE
+ SYNTAX INTEGER (0..255)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Byte pattern transmitted on ds0 channels when packets over/underflow the jitter buffer."
+::= { genEquipServicesPWProfilesEntry 17 }
+
+genEquipServicesPWProfilesCasAlarmPattern OBJECT-TYPE
+ SYNTAX INTEGER (0..15)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "CAS alarm pattern transmitted on E1 interface when packets over/underflow the jitter buffer."
+::= { genEquipServicesPWProfilesEntry 18 }
+
+genEquipServicesPWProfilesRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This value is the status of the entry."
+::= { genEquipServicesPWProfilesEntry 30 }
+
+
+-- PW Service Configuration Table
+genEquipServicesPWServiceTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipServicesPWServiceEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table allows configuration of pseudowire services, by assigning TDM ports or bundles, PSN tunnels,
+ and profiles to a service."
+ ::= { genEquipServicesPW 5 }
+
+genEquipServicesPWServiceEntry OBJECT-TYPE
+ SYNTAX GenEquipServicesPWServiceEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table allows configuration of pseudowire services, by assigning TDM ports or bundles, PSN tunnels,
+ and profiles to a service."
+ INDEX { genEquipServicesPWServicePWId }
+ ::= { genEquipServicesPWServiceTable 1 }
+
+GenEquipServicesPWServiceEntry ::=
+ SEQUENCE {
+ genEquipServicesPWServicePWId
+ INTEGER,
+ genEquipServicesPWServicePWType
+ INTEGER,
+ genEquipServicesPWServicePsnType
+ INTEGER,
+ genEquipServicesPWServiceTdmPort
+ INTEGER,
+ genEquipServicesPWServiceDs0bundle
+ INTEGER,
+ genEquipServicesPWServiceTdmProfileId
+ INTEGER,
+ genEquipServicesPWServicePsnTunnelProtection
+ EnableDisable,
+ genEquipServicesPWServicePsnTunnelOrGroupId
+ INTEGER,
+ genEquipServicesPWServiceSrcUdpPortOrEcid
+ INTEGER,
+ genEquipServicesPWServiceDstUdpPortOrEcid
+ INTEGER,
+ genEquipServicesPWServiceAdmin
+ EnableDisable,
+ genEquipServicesPWServiceCrReference
+ EnableDisable,
+ genEquipServicesPWServiceOperStatus
+ EnableDisable,
+ genEquipServicesPWServiceRowStatus
+ RowStatus
+}
+
+genEquipServicesPWServicePWId OBJECT-TYPE
+ SYNTAX INTEGER (1..256)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Pseudo Wire ID."
+::= { genEquipServicesPWServiceEntry 1 }
+
+genEquipServicesPWServicePWType OBJECT-TYPE
+ SYNTAX INTEGER {
+ e1-satop(0),
+ cespsn(1),
+ cas-cespsn(2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "PW type. E1-satop denotes SAToP. Cespsn Denotes CESoP without CAS signalling,
+ and cas-cespsn denotes CESoP with CAS signalling."
+::= { genEquipServicesPWServiceEntry 2 }
+
+genEquipServicesPWServicePsnType OBJECT-TYPE
+ SYNTAX INTEGER {
+ udpip(0),
+ eth(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "PSN tunnel type. UDPIP denotes UDP/IP, while eth denotes MEF8 encapsulation."
+::= { genEquipServicesPWServiceEntry 3 }
+
+genEquipServicesPWServiceTdmPort OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Number of TDM port (for SATOP). This parameter must be zero for CESoP."
+::= { genEquipServicesPWServiceEntry 4 }
+
+genEquipServicesPWServiceDs0bundle OBJECT-TYPE
+ SYNTAX INTEGER (1..496)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Number DS0 bundle (for CESoPSN). This parameter must be zero for SAToP."
+::= { genEquipServicesPWServiceEntry 5 }
+
+genEquipServicesPWServiceTdmProfileId OBJECT-TYPE
+ SYNTAX INTEGER (1..64)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "TDM configuration profile ID."
+::= { genEquipServicesPWServiceEntry 6 }
+
+genEquipServicesPWServicePsnTunnelProtection OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "PSN tunnel protection mode."
+::= { genEquipServicesPWServiceEntry 7 }
+
+genEquipServicesPWServicePsnTunnelOrGroupId OBJECT-TYPE
+ SYNTAX INTEGER (1..512)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "PSN tunnel ID for unprotected or PSN tunnel group ID for protected PSN channel."
+::= { genEquipServicesPWServiceEntry 8 }
+
+genEquipServicesPWServiceSrcUdpPortOrEcid OBJECT-TYPE
+ SYNTAX INTEGER (1..65535)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Source UDP Port for UDP IP tunnel or ECID for Ethernet tunnel."
+::= { genEquipServicesPWServiceEntry 9 }
+
+genEquipServicesPWServiceDstUdpPortOrEcid OBJECT-TYPE
+ SYNTAX INTEGER (1..65535)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Destination UDP Port for UDP IP tunnel or ECID for Ethernet tunnel."
+::= { genEquipServicesPWServiceEntry 10 }
+
+genEquipServicesPWServiceAdmin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Admin status."
+::= { genEquipServicesPWServiceEntry 11 }
+
+genEquipServicesPWServiceCrReference OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Clock recovery reference."
+::= { genEquipServicesPWServiceEntry 12 }
+
+genEquipServicesPWServiceOperStatus OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Operational status."
+::= { genEquipServicesPWServiceEntry 13 }
+
+genEquipServicesPWServiceRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This value is the status of the entry."
+::= { genEquipServicesPWServiceEntry 30 }
+
+
+--
+-- NG PW Services
+--
+genEquipServicesNGPW OBJECT IDENTIFIER ::= {genEquipServicesPW 6}
+
+--
+-- Bundle channel list configuration table - pw-bundle-channel-list-configuration-table
+--
+genEquipServicesNGPWBundlesTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipServicesNGPWBundlesEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table allows definition of the group of timeslots comprising a bundle."
+ ::= { genEquipServicesNGPW 1 }
+
+genEquipServicesNGPWBundlesEntry OBJECT-TYPE
+ SYNTAX GenEquipServicesNGPWBundlesEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table entry allows definition of the group of timeslots comprising a bundle."
+ INDEX { genEquipServicesNGPWBundlesSlotId, genEquipServicesNGPWBundlesTdmPort, genEquipServicesNGPWBundlesDs0List }
+ ::= { genEquipServicesNGPWBundlesTable 1 }
+
+GenEquipServicesNGPWBundlesEntry ::=
+ SEQUENCE {
+ genEquipServicesNGPWBundlesSlotId
+ INTEGER,
+ genEquipServicesNGPWBundlesTdmPort
+ INTEGER,
+ genEquipServicesNGPWBundlesDs0List
+ INTEGER,
+ genEquipServicesNGPWBundlesIfIndex
+ INTEGER,
+ genEquipServicesNGPWBundlesBundleId
+ INTEGER,
+ genEquipServicesNGPWBundlesRowStatus
+ RowStatus
+}
+
+genEquipServicesNGPWBundlesSlotId OBJECT-TYPE
+ SYNTAX INTEGER (2..12)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Slot where PW-LIC is inserted."
+::= { genEquipServicesNGPWBundlesEntry 1 }
+
+genEquipServicesNGPWBundlesTdmPort OBJECT-TYPE
+ SYNTAX INTEGER (1..16)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "TDM Port number."
+::= { genEquipServicesNGPWBundlesEntry 2 }
+
+genEquipServicesNGPWBundlesDs0List OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Timeslot number to be included in a bundle."
+::= { genEquipServicesNGPWBundlesEntry 3 }
+
+genEquipServicesNGPWBundlesIfIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "iIndex."
+::= { genEquipServicesNGPWBundlesEntry 4 }
+
+genEquipServicesNGPWBundlesBundleId OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Bundle ID."
+::= { genEquipServicesNGPWBundlesEntry 5 }
+
+genEquipServicesNGPWBundlesRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Row status to allow user add entries dynamically."
+::= { genEquipServicesNGPWBundlesEntry 30 }
+
+--
+-- Bundle configuration table - pw-bundle-configuration-table
+--
+genEquipServicesNGPWBundlesDescriptionTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipServicesNGPWBundlesDescriptionEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table allows configuring admin state and description for bundles."
+ ::= { genEquipServicesNGPW 2 }
+
+genEquipServicesNGPWBundlesDescriptionEntry OBJECT-TYPE
+ SYNTAX GenEquipServicesNGPWBundlesDescriptionEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table entry allows configuring admin state and description for bundles."
+ INDEX { genEquipServicesNGPWBundlesDescriptionSlotId, genEquipServicesNGPWBundlesDescriptionBundleId }
+ ::= { genEquipServicesNGPWBundlesDescriptionTable 1 }
+
+GenEquipServicesNGPWBundlesDescriptionEntry ::=
+ SEQUENCE {
+ genEquipServicesNGPWBundlesDescriptionSlotId
+ INTEGER,
+ genEquipServicesNGPWBundlesDescriptionBundleId
+ INTEGER,
+ genEquipServicesNGPWBundlesDescriptionAdmin
+ EnableDisableSMI2,
+ genEquipServicesNGPWBundlesDescriptionBundleDesc
+ DisplayString,
+ genEquipServicesNGPWBundlesDescriptionRowStatus
+ RowStatus
+}
+
+genEquipServicesNGPWBundlesDescriptionSlotId OBJECT-TYPE
+ SYNTAX INTEGER (2..12)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Slot where PW-LIC is inserted."
+::= { genEquipServicesNGPWBundlesDescriptionEntry 1 }
+
+genEquipServicesNGPWBundlesDescriptionBundleId OBJECT-TYPE
+ SYNTAX INTEGER (1..256)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Bundle ID."
+::= { genEquipServicesNGPWBundlesDescriptionEntry 2 }
+
+genEquipServicesNGPWBundlesDescriptionAdmin OBJECT-TYPE
+ SYNTAX EnableDisableSMI2
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Bundle administrative state."
+::= { genEquipServicesNGPWBundlesDescriptionEntry 3 }
+
+genEquipServicesNGPWBundlesDescriptionBundleDesc OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Bundle description."
+::= { genEquipServicesNGPWBundlesDescriptionEntry 4 }
+
+genEquipServicesNGPWBundlesDescriptionRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Row status to allow user add entries dynamically."
+::= { genEquipServicesNGPWBundlesDescriptionEntry 30 }
+
+--
+-- PW profile configuraiton table - pw-profile-configuration-table
+--
+genEquipServicesNGPWProfilesTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipServicesNGPWProfilesEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table allows configuration of PW service profiles."
+ ::= { genEquipServicesNGPW 3 }
+
+genEquipServicesNGPWProfilesEntry OBJECT-TYPE
+ SYNTAX GenEquipServicesNGPWProfilesEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table entry allows configuration of PW service profiles."
+ INDEX { genEquipServicesNGPWProfilesPWProfileId }
+ ::= { genEquipServicesNGPWProfilesTable 1 }
+
+GenEquipServicesNGPWProfilesEntry ::=
+ SEQUENCE {
+ genEquipServicesNGPWProfilesPWProfileId
+ INTEGER,
+ genEquipServicesNGPWProfilesPayloadSize
+ INTEGER,
+ genEquipServicesNGPWProfilesJitterBufferDepth
+ INTEGER,
+ genEquipServicesNGPWProfilesPayloadSuppression
+ EnableDisableSMI2,
+ genEquipServicesNGPWProfilesPayloadType
+ INTEGER,
+ genEquipServicesNGPWProfilesDs0Filler
+ INTEGER,
+ genEquipServicesNGPWProfilesCasAlarmPattern
+ INTEGER,
+ genEquipServicesNGPWProfilesRtpHeaderUsed
+ EnableDisableSMI2,
+ genEquipServicesNGPWProfilesRtpTimestampMode
+ PWRtpTimeStampMode,
+ genEquipServicesNGPWProfilesRtpTimestampAbsFactor
+ INTEGER,
+ genEquipServicesNGPWProfilesLopsDetection
+ EnableDisableSMI2,
+ genEquipServicesNGPWProfilesConseqPacketsInSync
+ INTEGER,
+ genEquipServicesNGPWProfilesConseqMissPktsOutSync
+ INTEGER,
+ genEquipServicesNGPWProfilesPktLossTimeWindow
+ INTEGER,
+ genEquipServicesNGPWProfilesExcessivePktLossThresh
+ INTEGER,
+ genEquipServicesNGPWProfilesAlarmThresh
+ INTEGER,
+ genEquipServicesNGPWProfilesClearAlarmThresh
+ INTEGER,
+ genEquipServicesNGPWProfilesMissingPktsToSes
+ INTEGER,
+ genEquipServicesNGPWProfilesRowStatus
+ RowStatus
+}
+
+genEquipServicesNGPWProfilesPWProfileId OBJECT-TYPE
+ SYNTAX INTEGER (1..64)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Unique PW profile ID."
+::= { genEquipServicesNGPWProfilesEntry 1 }
+
+genEquipServicesNGPWProfilesPayloadSize OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Payload size, in terms of TDM frames in each packet."
+::= { genEquipServicesNGPWProfilesEntry 2 }
+
+genEquipServicesNGPWProfilesJitterBufferDepth OBJECT-TYPE
+ SYNTAX INTEGER (1..32)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Jitter buffer depth (in milliseconds) to allow accommodation to the PSN-specific packet delay variation."
+::= { genEquipServicesNGPWProfilesEntry 3 }
+
+genEquipServicesNGPWProfilesPayloadSuppression OBJECT-TYPE
+ SYNTAX EnableDisableSMI2
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "When enabled, payload is suppresed upon incoming TDM failure."
+::= { genEquipServicesNGPWProfilesEntry 4 }
+
+genEquipServicesNGPWProfilesPayloadType OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Payload type byte."
+::= { genEquipServicesNGPWProfilesEntry 5 }
+
+genEquipServicesNGPWProfilesDs0Filler OBJECT-TYPE
+ SYNTAX INTEGER (0..255)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Byte pattern transmitted on ds0 channels when packets over/underflow the jitter buffer."
+::= { genEquipServicesNGPWProfilesEntry 6 }
+
+genEquipServicesNGPWProfilesCasAlarmPattern OBJECT-TYPE
+ SYNTAX INTEGER (0..15)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "CAS alarm pattern transmitted on E1 interface when packets over/underflow the jitter buffer."
+::= { genEquipServicesNGPWProfilesEntry 7 }
+
+genEquipServicesNGPWProfilesRtpHeaderUsed OBJECT-TYPE
+ SYNTAX EnableDisableSMI2
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "If set to False: an RTP header is not pre-pended to the TDM packet."
+::= { genEquipServicesNGPWProfilesEntry 8 }
+
+genEquipServicesNGPWProfilesRtpTimestampMode OBJECT-TYPE
+ SYNTAX PWRtpTimeStampMode
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "RTP timestamp mode."
+::= { genEquipServicesNGPWProfilesEntry 9 }
+
+genEquipServicesNGPWProfilesRtpTimestampAbsFactor OBJECT-TYPE
+ SYNTAX INTEGER (1..65535)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Multiplication factor for 8KHz units in absolute mode of RTP timestamping."
+::= { genEquipServicesNGPWProfilesEntry 10 }
+
+genEquipServicesNGPWProfilesLopsDetection OBJECT-TYPE
+ SYNTAX EnableDisableSMI2
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Timeout for TDM ports loopback."
+::= { genEquipServicesNGPWProfilesEntry 11 }
+
+genEquipServicesNGPWProfilesConseqPacketsInSync OBJECT-TYPE
+ SYNTAX INTEGER (1..10)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Number of consecutive packets with sequential sequence numbers required to exit LOPS."
+::= { genEquipServicesNGPWProfilesEntry 12 }
+
+genEquipServicesNGPWProfilesConseqMissPktsOutSync OBJECT-TYPE
+ SYNTAX INTEGER (1..15)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Number of consecutive missing packets required to enter LOPS."
+::= { genEquipServicesNGPWProfilesEntry 13 }
+
+genEquipServicesNGPWProfilesPktLossTimeWindow OBJECT-TYPE
+ SYNTAX INTEGER (1..65535)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Time for computing average packet loss rate to detect excessive packet loss."
+::= { genEquipServicesNGPWProfilesEntry 14 }
+
+genEquipServicesNGPWProfilesExcessivePktLossThresh OBJECT-TYPE
+ SYNTAX INTEGER (1..500)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Alarm threshold (in percent) for excessive packet loss."
+::= { genEquipServicesNGPWProfilesEntry 15 }
+
+genEquipServicesNGPWProfilesAlarmThresh OBJECT-TYPE
+ SYNTAX INTEGER (1..65535)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Delay (in msecs) for persistent alarm setting."
+::= { genEquipServicesNGPWProfilesEntry 16 }
+
+genEquipServicesNGPWProfilesClearAlarmThresh OBJECT-TYPE
+ SYNTAX INTEGER (1..65535)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Delay (in msecs) for persistent alarm clearing."
+::= { genEquipServicesNGPWProfilesEntry 17 }
+
+genEquipServicesNGPWProfilesMissingPktsToSes OBJECT-TYPE
+ SYNTAX INTEGER (1..100)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "TPercent of missing packets detected in 1 second window to cause SES to be counted."
+::= { genEquipServicesNGPWProfilesEntry 18 }
+
+genEquipServicesNGPWProfilesRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Row status to allow user add entries dynamically."
+::= { genEquipServicesNGPWProfilesEntry 30 }
+
+--
+-- PSN tunnel configuration table - pw-psn-tunnel-configuration-table
+--
+genEquipServicesNGPWPSNTunnelsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipServicesNGPWPSNTunnelsEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table allows configuration of PSN tunnel encapsulations for PW services."
+ ::= { genEquipServicesNGPW 4 }
+
+genEquipServicesNGPWPSNTunnelsEntry OBJECT-TYPE
+ SYNTAX GenEquipServicesNGPWPSNTunnelsEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table entry allows configuration of PSN tunnel encapsulations for PW services."
+ INDEX { genEquipServicesNGPWPSNTunnelsSlotID, genEquipServicesNGPWPSNTunnelsTunnelId }
+ ::= { genEquipServicesNGPWPSNTunnelsTable 1 }
+
+GenEquipServicesNGPWPSNTunnelsEntry ::=
+ SEQUENCE {
+ genEquipServicesNGPWPSNTunnelsSlotID
+ INTEGER,
+ genEquipServicesNGPWPSNTunnelsTunnelId
+ INTEGER,
+ genEquipServicesNGPWPSNTunnelsAdmin
+ EnableDisableSMI2,
+ genEquipServicesNGPWPSNTunnelsPsnType
+ PWTunnelPsnType,
+ genEquipServicesNGPWPSNTunnelsDestIpAddr
+ IpAddress,
+ genEquipServicesNGPWPSNTunnelsNextHopIp
+ IpAddress,
+ genEquipServicesNGPWPSNTunnelsTosDscp
+ INTEGER,
+ genEquipServicesNGPWPSNTunnelsRemoteMacAddr
+ OCTET STRING,
+ genEquipServicesNGPWPSNTunnelsSourceMPLSLabel
+ INTEGER,
+ genEquipServicesNGPWPSNTunnelsDestinationMPLSLabel
+ INTEGER,
+ genEquipServicesNGPWPSNTunnelsMPLSexp
+ INTEGER,
+ genEquipServicesNGPWPSNTunnelsVlanType
+ PWTunnelVlanType,
+ genEquipServicesNGPWPSNTunnelsVid
+ INTEGER,
+ genEquipServicesNGPWPSNTunnelsPBits
+ INTEGER,
+ genEquipServicesNGPWPSNTunnelsMaId
+ INTEGER,
+ genEquipServicesNGPWPSNTunnelsTDMDefectPropagation
+ EnableDisableSMI2,
+ genEquipServicesNGPWPSNTunnelsRowStatus
+ RowStatus
+}
+
+genEquipServicesNGPWPSNTunnelsSlotID OBJECT-TYPE
+ SYNTAX INTEGER (1..64)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Slot where PW-LIC is inserted."
+::= { genEquipServicesNGPWPSNTunnelsEntry 1 }
+
+genEquipServicesNGPWPSNTunnelsTunnelId OBJECT-TYPE
+ SYNTAX INTEGER (1..16)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "PSN Tunnel ID."
+::= { genEquipServicesNGPWPSNTunnelsEntry 2 }
+
+genEquipServicesNGPWPSNTunnelsAdmin OBJECT-TYPE
+ SYNTAX EnableDisableSMI2
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Payload type byte."
+::= { genEquipServicesNGPWPSNTunnelsEntry 3 }
+
+
+genEquipServicesNGPWPSNTunnelsPsnType OBJECT-TYPE
+ SYNTAX PWTunnelPsnType
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "PSN tunnel type. UDPIP denotes UDP/IP, while eth denotes MEF8 encapsulation."
+::= { genEquipServicesNGPWPSNTunnelsEntry 4 }
+
+genEquipServicesNGPWPSNTunnelsDestIpAddr OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Destination IP."
+::= { genEquipServicesNGPWPSNTunnelsEntry 5 }
+
+genEquipServicesNGPWPSNTunnelsNextHopIp OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Next hop IP Address for UDP/IP PSN tunnel."
+::= { genEquipServicesNGPWPSNTunnelsEntry 6 }
+
+genEquipServicesNGPWPSNTunnelsTosDscp OBJECT-TYPE
+ SYNTAX INTEGER (0..63)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "PSN Tunnel ToS (DSCP)."
+::= { genEquipServicesNGPWPSNTunnelsEntry 7 }
+
+genEquipServicesNGPWPSNTunnelsRemoteMacAddr OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(6))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Remote MAC address."
+::= { genEquipServicesNGPWPSNTunnelsEntry 8 }
+
+genEquipServicesNGPWPSNTunnelsSourceMPLSLabel OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Source MPLS Label."
+::= { genEquipServicesNGPWPSNTunnelsEntry 9 }
+
+genEquipServicesNGPWPSNTunnelsDestinationMPLSLabel OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Destination MPLS label."
+::= { genEquipServicesNGPWPSNTunnelsEntry 10 }
+
+genEquipServicesNGPWPSNTunnelsMPLSexp OBJECT-TYPE
+ SYNTAX INTEGER (0..7)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "MPLS Experimental field."
+::= { genEquipServicesNGPWPSNTunnelsEntry 11 }
+
+genEquipServicesNGPWPSNTunnelsVlanType OBJECT-TYPE
+ SYNTAX PWTunnelVlanType
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "VLAN type supported by this PSN tunnel (S-VLAN or C-VLAN)."
+::= { genEquipServicesNGPWPSNTunnelsEntry 12 }
+
+genEquipServicesNGPWPSNTunnelsVid OBJECT-TYPE
+ SYNTAX INTEGER (0..4090)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "PSN Tunnel VLAN ID."
+::= { genEquipServicesNGPWPSNTunnelsEntry 13 }
+
+genEquipServicesNGPWPSNTunnelsPBits OBJECT-TYPE
+ SYNTAX INTEGER (1..7)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "PSN Tunnel P-bits."
+::= { genEquipServicesNGPWPSNTunnelsEntry 14 }
+
+genEquipServicesNGPWPSNTunnelsMaId OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Maintenance Association ID."
+::= { genEquipServicesNGPWPSNTunnelsEntry 15 }
+
+genEquipServicesNGPWPSNTunnelsTDMDefectPropagation OBJECT-TYPE
+ SYNTAX EnableDisableSMI2
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "TDM defect propagation to SOAM. Enable for dual homing configuration."
+::= { genEquipServicesNGPWPSNTunnelsEntry 16 }
+
+genEquipServicesNGPWPSNTunnelsRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Row status to allow user add entries dynamically."
+::= { genEquipServicesNGPWPSNTunnelsEntry 30 }
+
+--
+-- PW service configuration table - pw-service-configuration-table
+--
+genEquipServicesNGPWServiceTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipServicesNGPWServiceEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table allows definition of PW services."
+ ::= { genEquipServicesNGPW 5 }
+
+genEquipServicesNGPWServiceEntry OBJECT-TYPE
+ SYNTAX GenEquipServicesNGPWServiceEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table entry allows definition of PW services."
+ INDEX { genEquipServicesNGPWServiceSlotID, genEquipServicesNGPWServicePWId }
+ ::= { genEquipServicesNGPWServiceTable 1 }
+
+GenEquipServicesNGPWServiceEntry ::=
+ SEQUENCE {
+ genEquipServicesNGPWServiceSlotID
+ INTEGER,
+ genEquipServicesNGPWServicePWId
+ INTEGER,
+ genEquipServicesNGPWServiceAdmin
+ EnableDisableSMI2,
+ genEquipServicesNGPWServicePWType
+ INTEGER,
+ genEquipServicesNGPWServicePsnType
+ PWTunnelPsnType,
+ genEquipServicesNGPWServiceDs0bundle
+ INTEGER,
+ genEquipServicesNGPWServiceTdmProfileId
+ INTEGER,
+ genEquipServicesNGPWServiceTunnel
+ INTEGER,
+ genEquipServicesNGPWServiceCrReference
+ NoYes,
+ genEquipServicesNGPWServiceSrcPsnId
+ INTEGER,
+ genEquipServicesNGPWServiceDstPsnId
+ INTEGER,
+ genEquipServicesNGPWServicePsnTunnelProtection
+ INTEGER,
+ genEquipServicesNGPWServiceRowStatus
+ RowStatus
+}
+
+genEquipServicesNGPWServiceSlotID OBJECT-TYPE
+ SYNTAX INTEGER (1..64)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Slot where PW-LIC is inserted."
+::= { genEquipServicesNGPWServiceEntry 1 }
+
+genEquipServicesNGPWServicePWId OBJECT-TYPE
+ SYNTAX INTEGER (1..16)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Pseudowire ID."
+::= { genEquipServicesNGPWServiceEntry 2 }
+
+genEquipServicesNGPWServiceAdmin OBJECT-TYPE
+ SYNTAX EnableDisableSMI2
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Administrative status of this PW service."
+::= { genEquipServicesNGPWServiceEntry 3 }
+
+
+genEquipServicesNGPWServicePWType OBJECT-TYPE
+ SYNTAX INTEGER {
+ satop(0),
+ cespsn(1),
+ cas-cespsn(2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates the emulated service to be carried over the PW service (SAToP, CESoP, CESoP with PSN)."
+::= { genEquipServicesNGPWServiceEntry 4 }
+
+genEquipServicesNGPWServicePsnType OBJECT-TYPE
+ SYNTAX PWTunnelPsnType
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates the PSN type that the PW service will use over the network."
+::= { genEquipServicesNGPWServiceEntry 5 }
+
+genEquipServicesNGPWServiceDs0bundle OBJECT-TYPE
+ SYNTAX INTEGER (1..256)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Number DS0 bundle (for CESoPSN). This parameter must be zero for SAToP."
+::= { genEquipServicesNGPWServiceEntry 6 }
+
+genEquipServicesNGPWServiceTdmProfileId OBJECT-TYPE
+ SYNTAX INTEGER (1..64)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates the PW profile id for this PW service."
+::= { genEquipServicesNGPWServiceEntry 7 }
+
+genEquipServicesNGPWServiceTunnel OBJECT-TYPE
+ SYNTAX INTEGER (1..16)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "PSN tunnel ID for unprotected or PSN tunnel group ID for protected PSN channel."
+::= { genEquipServicesNGPWServiceEntry 8 }
+
+genEquipServicesNGPWServiceCrReference OBJECT-TYPE
+ SYNTAX NoYes
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Whether this PW may be used as a reference for clock recovery."
+::= { genEquipServicesNGPWServiceEntry 9 }
+
+genEquipServicesNGPWServiceSrcPsnId OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Source UDP Port for UDP IP tunnel, ECID for Ethernet tunnel or label for MPLS tunnel."
+::= { genEquipServicesNGPWServiceEntry 10 }
+
+genEquipServicesNGPWServiceDstPsnId OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Destination UDP Port for UDP IP tunnel, ECID for Ethernet tunnel or label for MPLS tunnel."
+::= { genEquipServicesNGPWServiceEntry 11 }
+
+genEquipServicesNGPWServicePsnTunnelProtection OBJECT-TYPE
+ SYNTAX INTEGER {
+ no(0)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether this PW service is PSN protected."
+::= { genEquipServicesNGPWServiceEntry 12 }
+
+genEquipServicesNGPWServiceRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Row status to allow user add entries dynamically."
+::= { genEquipServicesNGPWServiceEntry 30 }
+
+--
+-- TDM port configuration table - pw-tdm-port-configuration-table
+--
+genEquipServicesNGPWTDMPortsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipServicesNGPWTDMPortsEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table allows configuration of TDM ports."
+ ::= { genEquipServicesNGPW 6 }
+
+genEquipServicesNGPWTDMPortsEntry OBJECT-TYPE
+ SYNTAX GenEquipServicesNGPWTDMPortsEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table entry allows configuration of TDM ports."
+ INDEX { genEquipServicesNGPWTDMPortsSlotID, genEquipServicesNGPWTDMPortsPort }
+ ::= { genEquipServicesNGPWTDMPortsTable 1 }
+
+GenEquipServicesNGPWTDMPortsEntry ::=
+ SEQUENCE {
+ genEquipServicesNGPWTDMPortsSlotID
+ INTEGER,
+ genEquipServicesNGPWTDMPortsPort
+ INTEGER,
+ genEquipServicesNGPWTDMPortsIfIndex
+ INTEGER,
+ genEquipServicesNGPWTDMPortsAdmin
+ EnableDisableSMI2,
+ genEquipServicesNGPWTDMPortsLineType
+ INTEGER,
+ genEquipServicesNGPWTDMPortsLineCoding
+ INTEGER,
+ genEquipServicesNGPWTDMPortsChannelization
+ EnableDisableSMI2,
+ genEquipServicesNGPWTDMPortsTimingMode
+ INTEGER,
+ genEquipServicesNGPWTDMPortsClockSourceRef
+ INTEGER,
+ genEquipServicesNGPWTDMPortsClkSrcRefPort
+ INTEGER,
+ genEquipServicesNGPWTDMPortsIdleCode
+ INTEGER,
+ genEquipServicesNGPWTDMPortsCableLength
+ INTEGER,
+ genEquipServicesNGPWTDMPortsLoopback
+ TDMLoopbackType
+}
+
+genEquipServicesNGPWTDMPortsSlotID OBJECT-TYPE
+ SYNTAX INTEGER (2..12)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Slot where PW-LIC is inserted."
+::= { genEquipServicesNGPWTDMPortsEntry 1 }
+
+genEquipServicesNGPWTDMPortsPort OBJECT-TYPE
+ SYNTAX INTEGER (1..16)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Physical port number in the card."
+::= { genEquipServicesNGPWTDMPortsEntry 2 }
+
+genEquipServicesNGPWTDMPortsIfIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "ifIndex."
+::= { genEquipServicesNGPWTDMPortsEntry 3 }
+
+genEquipServicesNGPWTDMPortsAdmin OBJECT-TYPE
+ SYNTAX EnableDisableSMI2
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "TDM port administrative state."
+::= { genEquipServicesNGPWTDMPortsEntry 4 }
+
+genEquipServicesNGPWTDMPortsLineType OBJECT-TYPE
+ SYNTAX INTEGER {
+ e1Unframed(0),
+ e1(1),
+ e1-crc(2),
+ e1-mf(3),
+ e1-mf-crc(4),
+ ds1-d4(5),
+ ds1-esf(6)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Line type of this TDM port."
+::= { genEquipServicesNGPWTDMPortsEntry 5 }
+
+genEquipServicesNGPWTDMPortsLineCoding OBJECT-TYPE
+ SYNTAX INTEGER {
+ hdb3-b8zs(0),
+ ami(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Line coding for this port. The value hdb3-b8zs means b8zs for T1 and hdb3 for E1. AMI is only for T1."
+::= { genEquipServicesNGPWTDMPortsEntry 6 }
+
+genEquipServicesNGPWTDMPortsChannelization OBJECT-TYPE
+ SYNTAX EnableDisableSMI2
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Indication whether this TDM port is channelized into DS0s."
+::= { genEquipServicesNGPWTDMPortsEntry 7 }
+
+genEquipServicesNGPWTDMPortsTimingMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ loop(0),
+ absolute(1),
+ clock-recovery(2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Clock reference for the outgoing TDM signal."
+::= { genEquipServicesNGPWTDMPortsEntry 8 }
+
+genEquipServicesNGPWTDMPortsClockSourceRef OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0),
+ front-panel(1),
+ sys-ref(2)
+ }
+
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Clock source reference for Absolute clock mode. ???none??? - for loop or clock-recovery timing modes."
+::= { genEquipServicesNGPWTDMPortsEntry 9 }
+
+genEquipServicesNGPWTDMPortsClkSrcRefPort OBJECT-TYPE
+ SYNTAX INTEGER (0..16)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "TDM port serving as a clock reference for loop or clock-recovery timing modes."
+::= { genEquipServicesNGPWTDMPortsEntry 10 }
+
+genEquipServicesNGPWTDMPortsIdleCode OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Value to be transmitted on this TDM port in unused timeslots."
+::= { genEquipServicesNGPWTDMPortsEntry 11 }
+
+genEquipServicesNGPWTDMPortsCableLength OBJECT-TYPE
+ SYNTAX INTEGER {
+ fixed-or-0-133ft(0),
+ len-133-266ft(1),
+ len-266-399ft(2),
+ len-399-533ft(3),
+ len-533-655ft(4)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Cable length for this port. The value fixed-or-0-133ft means fixed for E1 (the only valid value) and 0-133ft for T1."
+::= { genEquipServicesNGPWTDMPortsEntry 12 }
+
+genEquipServicesNGPWTDMPortsLoopback OBJECT-TYPE
+ SYNTAX TDMLoopbackType
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Type of required loopback on this TDM port."
+::= { genEquipServicesNGPWTDMPortsEntry 13 }
+
+--
+-- PSN tunnel status table - pw-psn-tunnel-status-table
+--
+genEquipServicesNGPWPSNTunnelsStatusTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipServicesNGPWPSNTunnelsStatusEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table contains status and information about existing PSN tunnels."
+ ::= { genEquipServicesNGPW 7 }
+
+genEquipServicesNGPWPSNTunnelsStatusEntry OBJECT-TYPE
+ SYNTAX GenEquipServicesNGPWPSNTunnelsStatusEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table entry contains status and information about existing PSN tunnels."
+ INDEX { genEquipServicesNGPWPSNTunnelsStatusSlotID, genEquipServicesNGPWPSNTunnelsStatusTunnelId }
+ ::= { genEquipServicesNGPWPSNTunnelsStatusTable 1 }
+
+GenEquipServicesNGPWPSNTunnelsStatusEntry ::=
+ SEQUENCE {
+ genEquipServicesNGPWPSNTunnelsStatusSlotID
+ INTEGER,
+ genEquipServicesNGPWPSNTunnelsStatusTunnelId
+ INTEGER,
+ genEquipServicesNGPWPSNTunnelsStatusOperStatus
+ DownUp,
+ genEquipServicesNGPWPSNTunnelsStatusSourceIpAddr
+ IpAddress,
+ genEquipServicesNGPWPSNTunnelsStatusSourceMacAddr
+ OCTET STRING,
+ genEquipServicesNGPWPSNTunnelsStatusRemoteMacAddr
+ OCTET STRING
+}
+
+genEquipServicesNGPWPSNTunnelsStatusSlotID OBJECT-TYPE
+ SYNTAX INTEGER (2..12)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Slot where PW-LIC is inserted."
+::= { genEquipServicesNGPWPSNTunnelsStatusEntry 1 }
+
+genEquipServicesNGPWPSNTunnelsStatusTunnelId OBJECT-TYPE
+ SYNTAX INTEGER (1..16)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "PSN Tunnel ID."
+::= { genEquipServicesNGPWPSNTunnelsStatusEntry 2 }
+
+genEquipServicesNGPWPSNTunnelsStatusOperStatus OBJECT-TYPE
+ SYNTAX DownUp
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "PSN tunnel operational state."
+::= { genEquipServicesNGPWPSNTunnelsStatusEntry 3 }
+
+genEquipServicesNGPWPSNTunnelsStatusSourceIpAddr OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "PSN tunnel source IP address."
+::= { genEquipServicesNGPWPSNTunnelsStatusEntry 4 }
+
+genEquipServicesNGPWPSNTunnelsStatusSourceMacAddr OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(6))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "PSN tunnel source MAC address."
+::= { genEquipServicesNGPWPSNTunnelsStatusEntry 5 }
+
+genEquipServicesNGPWPSNTunnelsStatusRemoteMacAddr OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(6))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "PSN tunnel remote MAC address."
+::= { genEquipServicesNGPWPSNTunnelsStatusEntry 6 }
+
+--
+-- PW service status table - pw-service-status-table
+--
+genEquipServicesNGPWServiceStatusTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipServicesNGPWServiceStatusEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table contains status information of existing PW services."
+ ::= { genEquipServicesNGPW 8 }
+
+genEquipServicesNGPWServiceStatusEntry OBJECT-TYPE
+ SYNTAX GenEquipServicesNGPWServiceStatusEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table entry contains status information of existing PW services."
+ INDEX { genEquipServicesNGPWServiceStatusSlotID, genEquipServicesNGPWServiceStatusID }
+ ::= { genEquipServicesNGPWServiceStatusTable 1 }
+
+GenEquipServicesNGPWServiceStatusEntry ::=
+ SEQUENCE {
+ genEquipServicesNGPWServiceStatusSlotID
+ INTEGER,
+ genEquipServicesNGPWServiceStatusID
+ INTEGER,
+ genEquipServicesNGPWServiceStatusOperStatus
+ DownUp,
+ genEquipServicesNGPWServiceStatusClearStats
+ NoYes,
+ genEquipServicesNGPWServiceStatusTxPkts
+ Counter64,
+ genEquipServicesNGPWServiceStatusReceivedPkts
+ Counter64,
+ genEquipServicesNGPWServiceStatusTransitionsLOPS
+ Counter64,
+ genEquipServicesNGPWServiceStatusJitterBufferOverruns
+ Counter64,
+ genEquipServicesNGPWServiceStatusBufferDeviations
+ Counter64,
+ genEquipServicesNGPWServiceStatusMinJitterCount
+ Counter64,
+ genEquipServicesNGPWServiceStatusMaxJitterCount
+ Counter64
+}
+
+genEquipServicesNGPWServiceStatusSlotID OBJECT-TYPE
+ SYNTAX INTEGER (2..12)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Slot where PW-LIC is inserted."
+::= { genEquipServicesNGPWServiceStatusEntry 1 }
+
+genEquipServicesNGPWServiceStatusID OBJECT-TYPE
+ SYNTAX INTEGER (1..16)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Pseudowire ID."
+::= { genEquipServicesNGPWServiceStatusEntry 2 }
+
+genEquipServicesNGPWServiceStatusOperStatus OBJECT-TYPE
+ SYNTAX DownUp
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates the operational status of PW service."
+::= { genEquipServicesNGPWServiceStatusEntry 3 }
+
+genEquipServicesNGPWServiceStatusClearStats OBJECT-TYPE
+ SYNTAX NoYes
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Clear all statistics for this PW service."
+::= { genEquipServicesNGPWServiceStatusEntry 4 }
+
+genEquipServicesNGPWServiceStatusTxPkts OBJECT-TYPE
+ SYNTAX Counter64
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Number of transmitted packets."
+::= { genEquipServicesNGPWServiceStatusEntry 5 }
+
+genEquipServicesNGPWServiceStatusReceivedPkts OBJECT-TYPE
+ SYNTAX Counter64
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Number of received packets."
+::= { genEquipServicesNGPWServiceStatusEntry 6 }
+
+genEquipServicesNGPWServiceStatusTransitionsLOPS OBJECT-TYPE
+ SYNTAX Counter64
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Number of transitions from the normal state to the LOPS."
+::= { genEquipServicesNGPWServiceStatusEntry 7 }
+
+genEquipServicesNGPWServiceStatusJitterBufferOverruns OBJECT-TYPE
+ SYNTAX Counter64
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Number of jitter buffer overruns."
+::= { genEquipServicesNGPWServiceStatusEntry 8 }
+
+genEquipServicesNGPWServiceStatusBufferDeviations OBJECT-TYPE
+ SYNTAX Counter64
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Max Jitter Buffer Deviation."
+::= { genEquipServicesNGPWServiceStatusEntry 9 }
+
+genEquipServicesNGPWServiceStatusMinJitterCount OBJECT-TYPE
+ SYNTAX Counter64
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Minimum jitter buffer usage registered for the last second."
+::= { genEquipServicesNGPWServiceStatusEntry 10 }
+
+genEquipServicesNGPWServiceStatusMaxJitterCount OBJECT-TYPE
+ SYNTAX Counter64
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Maximum jitter buffer usage registered for the last second."
+::= { genEquipServicesNGPWServiceStatusEntry 11 }
+
+--
+-- PW TDM port status table - pw-tdm-port-status-table and pw-tdm-port-loopback-status-table
+--
+genEquipServicesNGPWTDMPortsStatusTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipServicesNGPWTDMPortsStatusEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table contains status information about TDM ports."
+ ::= { genEquipServicesNGPW 9 }
+
+genEquipServicesNGPWTDMPortsStatusEntry OBJECT-TYPE
+ SYNTAX GenEquipServicesNGPWTDMPortsStatusEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table entry contains status information about TDM ports."
+ INDEX { genEquipServicesNGPWTDMPortsStatusIfIndex }
+ ::= { genEquipServicesNGPWTDMPortsStatusTable 1 }
+
+GenEquipServicesNGPWTDMPortsStatusEntry ::=
+ SEQUENCE {
+ genEquipServicesNGPWTDMPortsStatusSlotID
+ INTEGER,
+ genEquipServicesNGPWTDMPortsStatusPort
+ INTEGER,
+ genEquipServicesNGPWTDMPortsStatusIfIndex
+ INTEGER,
+ genEquipServicesNGPWTDMPortsStatusOperStatus
+ DownUp,
+ genEquipServicesNGPWTDMPortsStatusLoopbackCounter
+ INTEGER,
+ genEquipServicesNGPWTDMPortsStatusActualLoopback
+ INTEGER,
+ genEquipServicesNGPWTDMPortsStatusLineStatus
+ INTEGER,
+ genEquipServicesNGPWTDMPortsStatusLoopback
+ TDMLoopbackType
+}
+
+genEquipServicesNGPWTDMPortsStatusSlotID OBJECT-TYPE
+ SYNTAX INTEGER (2..12)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Slot where PW-LIC is inserted."
+::= { genEquipServicesNGPWTDMPortsStatusEntry 1 }
+
+genEquipServicesNGPWTDMPortsStatusPort OBJECT-TYPE
+ SYNTAX INTEGER (1..16)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Physical port number in the card."
+::= { genEquipServicesNGPWTDMPortsStatusEntry 2 }
+
+genEquipServicesNGPWTDMPortsStatusIfIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "ifIndex."
+::= { genEquipServicesNGPWTDMPortsStatusEntry 3 }
+
+genEquipServicesNGPWTDMPortsStatusOperStatus OBJECT-TYPE
+ SYNTAX DownUp
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Operational state of the port."
+::= { genEquipServicesNGPWTDMPortsStatusEntry 4 }
+
+genEquipServicesNGPWTDMPortsStatusLoopbackCounter OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Loopback time left (in seconds)"
+::= { genEquipServicesNGPWTDMPortsStatusEntry 5 }
+
+genEquipServicesNGPWTDMPortsStatusActualLoopback OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Actual status of loopback on this TDM port reported by the card."
+::= { genEquipServicesNGPWTDMPortsStatusEntry 6 }
+
+genEquipServicesNGPWTDMPortsStatusLineStatus OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Currently present line-level PDH alarms."
+::= { genEquipServicesNGPWTDMPortsStatusEntry 7 }
+
+genEquipServicesNGPWTDMPortsStatusLoopback OBJECT-TYPE
+ SYNTAX TDMLoopbackType
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Type of required loopback on this TDM port."
+::= { genEquipServicesNGPWTDMPortsStatusEntry 8 }
+
+--
+-- Bundle status table - pw-bundle-status-table
+--
+genEquipServicesNGPWBundlesStatusTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipServicesNGPWBundlesStatusEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table contains the current staus for bundles."
+ ::= { genEquipServicesNGPW 10 }
+
+genEquipServicesNGPWBundlesStatusEntry OBJECT-TYPE
+ SYNTAX GenEquipServicesNGPWBundlesStatusEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table contains the current staus for bundles."
+ INDEX { genEquipServicesNGPWBundlesStatusSlotID, genEquipServicesNGPWBundlesStatusBundleId }
+ ::= { genEquipServicesNGPWBundlesStatusTable 1 }
+
+GenEquipServicesNGPWBundlesStatusEntry ::=
+ SEQUENCE {
+ genEquipServicesNGPWBundlesStatusSlotID
+ INTEGER,
+ genEquipServicesNGPWBundlesStatusBundleId
+ INTEGER,
+ genEquipServicesNGPWBundlesStatusOperStatus
+ DownUp
+}
+
+genEquipServicesNGPWBundlesStatusSlotID OBJECT-TYPE
+ SYNTAX INTEGER (2..12)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Slot where PW-LIC is inserted."
+::= { genEquipServicesNGPWBundlesStatusEntry 1 }
+
+genEquipServicesNGPWBundlesStatusBundleId OBJECT-TYPE
+ SYNTAX INTEGER (1..256)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Bundle ID."
+::= { genEquipServicesNGPWBundlesStatusEntry 2 }
+
+genEquipServicesNGPWBundlesStatusOperStatus OBJECT-TYPE
+ SYNTAX DownUp
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Bundle operational state."
+::= { genEquipServicesNGPWBundlesStatusEntry 3 }
+
+--
+-- PW Tunnel group configuration table - pw-psn-tunnel-group-configuration-table
+--
+
+genEquipServicesNGPWPSNTunnelGroupTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipServicesNGPWPSNTunnelGroupEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table allows configuration of groups of tunnels for PW path protection."
+ ::= { genEquipServicesNGPW 11 }
+
+genEquipServicesNGPWPSNTunnelGroupEntry OBJECT-TYPE
+ SYNTAX GenEquipServicesNGPWPSNTunnelGroupEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table entry allows configuration of groups of tunnels for PW path protection."
+ INDEX { genEquipServicesNGPWPSNTunnelGroupSlot,
+ genEquipServicesNGPWPSNTunnelGroupId }
+ ::= { genEquipServicesNGPWPSNTunnelGroupTable 1 }
+
+GenEquipServicesNGPWPSNTunnelGroupEntry ::=
+ SEQUENCE {
+ genEquipServicesNGPWPSNTunnelGroupSlot
+ INTEGER,
+ genEquipServicesNGPWPSNTunnelGroupId
+ INTEGER,
+ genEquipServicesNGPWPSNTunnelGroupPrimaryId
+ INTEGER,
+ genEquipServicesNGPWPSNTunnelGroupSecondaryId
+ INTEGER,
+ genEquipServicesNGPWPSNTunnelGroupAdmin
+ EnableDisableSMI2,
+ genEquipServicesNGPWPSNTunnelGroupRevertive
+ EnableDisableSMI2,
+ genEquipServicesNGPWPSNTunnelGroupProtectionMode
+ EnableDisableSMI2,
+ genEquipServicesNGPWPSNTunnelGroupRowStatus
+ RowStatus
+}
+
+genEquipServicesNGPWPSNTunnelGroupSlot OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Slot where PW-LIC is inserted."
+::= { genEquipServicesNGPWPSNTunnelGroupEntry 1 }
+
+genEquipServicesNGPWPSNTunnelGroupId OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates the corresponding PSN Tunnel Protection Group."
+::= { genEquipServicesNGPWPSNTunnelGroupEntry 2 }
+
+genEquipServicesNGPWPSNTunnelGroupPrimaryId OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Tunnel ID for the primary path."
+
+::= { genEquipServicesNGPWPSNTunnelGroupEntry 3 }
+
+genEquipServicesNGPWPSNTunnelGroupSecondaryId OBJECT-TYPE
+ SYNTAX INTEGER (1..128)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Tunnel ID for the secondary path."
+
+::= { genEquipServicesNGPWPSNTunnelGroupEntry 4 }
+
+genEquipServicesNGPWPSNTunnelGroupAdmin OBJECT-TYPE
+ SYNTAX EnableDisableSMI2
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Admin."
+
+::= { genEquipServicesNGPWPSNTunnelGroupEntry 5 }
+
+genEquipServicesNGPWPSNTunnelGroupRevertive OBJECT-TYPE
+ SYNTAX EnableDisableSMI2
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Enable for revertive protection. Default is disabled."
+
+::= { genEquipServicesNGPWPSNTunnelGroupEntry 6 }
+
+genEquipServicesNGPWPSNTunnelGroupProtectionMode OBJECT-TYPE
+ SYNTAX EnableDisableSMI2
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Protection mode 1+1."
+
+::= { genEquipServicesNGPWPSNTunnelGroupEntry 7 }
+
+genEquipServicesNGPWPSNTunnelGroupRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This value is the status of the entry."
+::= { genEquipServicesNGPWPSNTunnelGroupEntry 30 }
+
+--
+-- PW Tunnel group status table - pw-psn-tunnel-group-status-table
+--
+
+genEquipServicesNGPWPSNTunnelGroupStatusTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipServicesNGPWPSNTunnelGroupStatusEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table contains status of path protection tunnels."
+ ::= { genEquipServicesNGPW 12 }
+
+genEquipServicesNGPWPSNTunnelGroupStatusEntry OBJECT-TYPE
+ SYNTAX GenEquipServicesNGPWPSNTunnelGroupStatusEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table entry contains status of path protection tunnels."
+ INDEX { genEquipServicesNGPWPSNTunnelGroupStatusSlot,
+ genEquipServicesNGPWPSNTunnelGroupStatusId }
+ ::= { genEquipServicesNGPWPSNTunnelGroupStatusTable 1 }
+
+GenEquipServicesNGPWPSNTunnelGroupStatusEntry ::=
+ SEQUENCE {
+ genEquipServicesNGPWPSNTunnelGroupStatusSlot
+ INTEGER,
+ genEquipServicesNGPWPSNTunnelGroupStatusId
+ INTEGER,
+ genEquipServicesNGPWPSNTunnelGroupStatusOperStatus
+ DownUp,
+ genEquipServicesNGPWPSNTunnelGroupStatusProtectionCommand
+ TunnelGroupProtectionCmd,
+ genEquipServicesNGPWPSNTunnelGroupStatusProtectionSwitches
+ INTEGER,
+ genEquipServicesNGPWPSNTunnelGroupStatusActiveTunnel
+ INTEGER,
+ genEquipServicesNGPWPSNTunnelGroupStatusClearStats
+ OffOn,
+ genEquipServicesNGPWPSNTunnelGroupStatusRevertiveCountdown
+ INTEGER
+}
+
+genEquipServicesNGPWPSNTunnelGroupStatusSlot OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Slot where PW-LIC is inserted."
+::= { genEquipServicesNGPWPSNTunnelGroupStatusEntry 1 }
+
+genEquipServicesNGPWPSNTunnelGroupStatusId OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Tunnel group ID."
+::= { genEquipServicesNGPWPSNTunnelGroupStatusEntry 2 }
+
+genEquipServicesNGPWPSNTunnelGroupStatusOperStatus OBJECT-TYPE
+ SYNTAX DownUp
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Tunnel group operational state."
+
+::= { genEquipServicesNGPWPSNTunnelGroupStatusEntry 3 }
+
+genEquipServicesNGPWPSNTunnelGroupStatusProtectionCommand OBJECT-TYPE
+ SYNTAX TunnelGroupProtectionCmd
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "User command to perform a path protection switch."
+
+::= { genEquipServicesNGPWPSNTunnelGroupStatusEntry 4 }
+
+genEquipServicesNGPWPSNTunnelGroupStatusProtectionSwitches OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "A counter of PSN tunnel protection switches."
+
+::= { genEquipServicesNGPWPSNTunnelGroupStatusEntry 5 }
+
+genEquipServicesNGPWPSNTunnelGroupStatusActiveTunnel OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Current active PSN tunnel."
+::= { genEquipServicesNGPWPSNTunnelGroupStatusEntry 6 }
+
+genEquipServicesNGPWPSNTunnelGroupStatusClearStats OBJECT-TYPE
+ SYNTAX OffOn
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "User command to clear number of switches counter."
+::= { genEquipServicesNGPWPSNTunnelGroupStatusEntry 7 }
+
+genEquipServicesNGPWPSNTunnelGroupStatusRevertiveCountdown OBJECT-TYPE
+ SYNTAX OffOn
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Time left until revertive switch is performed."
+::= { genEquipServicesNGPWPSNTunnelGroupStatusEntry 8 }
+
+
+--
+-- PW Maintenance Domain configuration table - pw-soam-md-configuration-table
+--
+
+genEquipServicesNGPWSOAMMDTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipServicesNGPWSOAMMDEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table allows configuration of MD parameters at the PW card."
+ ::= { genEquipServicesNGPW 13 }
+
+genEquipServicesNGPWSOAMMDEntry OBJECT-TYPE
+ SYNTAX GenEquipServicesNGPWSOAMMDEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table entry allows configuration of MD parameters at the PW card."
+ INDEX { genEquipServicesNGPWSOAMMDSlot,
+ genEquipServicesNGPWSOAMMDId }
+ ::= { genEquipServicesNGPWSOAMMDTable 1 }
+
+GenEquipServicesNGPWSOAMMDEntry ::=
+ SEQUENCE {
+ genEquipServicesNGPWSOAMMDSlot
+ INTEGER,
+ genEquipServicesNGPWSOAMMDId
+ INTEGER,
+ genEquipServicesNGPWSOAMMDName
+ DisplayString,
+ genEquipServicesNGPWSOAMMDLevel
+ INTEGER,
+ genEquipServicesNGPWSOAMMDRowStatus
+ RowStatus
+}
+
+genEquipServicesNGPWSOAMMDSlot OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Slot where PW-LIC is inserted."
+::= { genEquipServicesNGPWSOAMMDEntry 1 }
+
+genEquipServicesNGPWSOAMMDId OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Maintenance Domain ID."
+::= { genEquipServicesNGPWSOAMMDEntry 2 }
+
+genEquipServicesNGPWSOAMMDName OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Maintenance Domain Name."
+
+::= { genEquipServicesNGPWSOAMMDEntry 3 }
+
+genEquipServicesNGPWSOAMMDLevel OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Maintenance Domain level."
+
+::= { genEquipServicesNGPWSOAMMDEntry 4 }
+
+genEquipServicesNGPWSOAMMDRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Row status to allow user add entries dynamically."
+
+::= { genEquipServicesNGPWSOAMMDEntry 30 }
+
+--
+-- PW Maintenance Association configuration table - pw-soam-ma-configuration-table
+--
+
+genEquipServicesNGPWSOAMMATable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipServicesNGPWSOAMMAEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table allows configuration of MA parameters at the PW card."
+ ::= { genEquipServicesNGPW 14 }
+
+genEquipServicesNGPWSOAMMAEntry OBJECT-TYPE
+ SYNTAX GenEquipServicesNGPWSOAMMAEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table entry allows configuration of MA parameters at the PW card."
+ INDEX { genEquipServicesNGPWSOAMMASlot,
+ genEquipServicesNGPWSOAMMAId }
+ ::= { genEquipServicesNGPWSOAMMATable 1 }
+
+GenEquipServicesNGPWSOAMMAEntry ::=
+ SEQUENCE {
+ genEquipServicesNGPWSOAMMASlot
+ INTEGER,
+ genEquipServicesNGPWSOAMMAId
+ INTEGER,
+ genEquipServicesNGPWSOAMMAName
+ DisplayString,
+ genEquipServicesNGPWSOAMMAMdId
+ INTEGER,
+ genEquipServicesNGPWSOAMMALocalMepId
+ INTEGER,
+ genEquipServicesNGPWSOAMMARemoteMepId
+ INTEGER,
+ genEquipServicesNGPWSOAMMAVid
+ INTEGER,
+ genEquipServicesNGPWSOAMMAVlanType
+ PWTunnelVlanType,
+ genEquipServicesNGPWSOAMMACCMAdmin
+ EnableDisableSMI2,
+ genEquipServicesNGPWSOAMMACCMInterval
+ PWSOAMccmInterval,
+ genEquipServicesNGPWSOAMMACCMLTMPriority
+ INTEGER,
+ genEquipServicesNGPWSOAMMARowStatus
+ RowStatus
+}
+
+genEquipServicesNGPWSOAMMASlot OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Slot ID."
+::= { genEquipServicesNGPWSOAMMAEntry 1 }
+
+genEquipServicesNGPWSOAMMAId OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Maintenance association ID."
+::= { genEquipServicesNGPWSOAMMAEntry 2 }
+
+genEquipServicesNGPWSOAMMAName OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Maintenance Association name."
+
+::= { genEquipServicesNGPWSOAMMAEntry 3 }
+
+genEquipServicesNGPWSOAMMAMdId OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Maintenance Domain ID."
+
+::= { genEquipServicesNGPWSOAMMAEntry 4 }
+
+genEquipServicesNGPWSOAMMALocalMepId OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Local MEP ID."
+
+::= { genEquipServicesNGPWSOAMMAEntry 5 }
+
+genEquipServicesNGPWSOAMMARemoteMepId OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Remote MEP ID."
+
+::= { genEquipServicesNGPWSOAMMAEntry 6 }
+
+genEquipServicesNGPWSOAMMAVid OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "VLAN ID of the Maintenance Association."
+
+::= { genEquipServicesNGPWSOAMMAEntry 7 }
+
+genEquipServicesNGPWSOAMMAVlanType OBJECT-TYPE
+ SYNTAX PWTunnelVlanType
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "VLAN type of the Maintenance Association."
+
+::= { genEquipServicesNGPWSOAMMAEntry 8 }
+
+genEquipServicesNGPWSOAMMACCMAdmin OBJECT-TYPE
+ SYNTAX EnableDisableSMI2
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Maintenance Association CCM administrative status."
+
+::= { genEquipServicesNGPWSOAMMAEntry 9 }
+
+genEquipServicesNGPWSOAMMACCMInterval OBJECT-TYPE
+ SYNTAX PWSOAMccmInterval
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Maintenance Association CCM Interval."
+
+::= { genEquipServicesNGPWSOAMMAEntry 10 }
+
+genEquipServicesNGPWSOAMMACCMLTMPriority OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Maintenance Association link trace message priority."
+
+::= { genEquipServicesNGPWSOAMMAEntry 11 }
+
+genEquipServicesNGPWSOAMMARowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Row status to allow user add entries dynamically."
+
+::= { genEquipServicesNGPWSOAMMAEntry 30 }
+
+--
+-- PW Maintenance Association status table - pw-soam-ma-status-table
+--
+
+genEquipServicesNGPWSOAMMAStatusTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipServicesNGPWSOAMMAStatusEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table shows the SOAM status of each MA at the PW card level."
+ ::= { genEquipServicesNGPW 15 }
+
+genEquipServicesNGPWSOAMMAStatusEntry OBJECT-TYPE
+ SYNTAX GenEquipServicesNGPWSOAMMAStatusEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table entry shows the SOAM status of each MA at the PW card level."
+ INDEX { genEquipServicesNGPWSOAMMAStatusSlot,
+ genEquipServicesNGPWSOAMMAStatusId }
+ ::= { genEquipServicesNGPWSOAMMAStatusTable 1 }
+
+GenEquipServicesNGPWSOAMMAStatusEntry ::=
+ SEQUENCE {
+ genEquipServicesNGPWSOAMMAStatusSlot
+ INTEGER,
+ genEquipServicesNGPWSOAMMAStatusId
+ INTEGER,
+ genEquipServicesNGPWSOAMMAStatusRemoteMepMACAddr
+ MacAddress,
+ genEquipServicesNGPWSOAMMAStatusDefects
+ INTEGER
+}
+
+genEquipServicesNGPWSOAMMAStatusSlot OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Slot ID."
+::= { genEquipServicesNGPWSOAMMAStatusEntry 1 }
+
+genEquipServicesNGPWSOAMMAStatusId OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Maintenance association ID."
+::= { genEquipServicesNGPWSOAMMAStatusEntry 2 }
+
+genEquipServicesNGPWSOAMMAStatusRemoteMepMACAddr OBJECT-TYPE
+ SYNTAX MacAddress
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Remote MEP MAC Address."
+
+::= { genEquipServicesNGPWSOAMMAStatusEntry 3 }
+
+genEquipServicesNGPWSOAMMAStatusDefects OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Bitmap field: no-alarm (0), RDI (1), MAC-status (2), remote CCM (4), error CCM (8), Cross-connection CCM (16), AIS (32)."
+
+::= { genEquipServicesNGPWSOAMMAStatusEntry 4 }
+
+--
+-- Service TDM Scalars.
+--
+genEquipServicesNGPWTDM OBJECT IDENTIFIER ::= {genEquipServicesNGPW 20}
+
+genEquipServicesNGPWTDMRevertiveTimer OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The WTR (Wait To Restore) timer for revertive switches."
+::= { genEquipServicesNGPWTDM 1 }
+
+genEquipServicesNGPWRangeVC OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "TDM services VC range."
+::= { genEquipServicesNGPWTDM 2 }
+
+genEquipServicesNGPWOffsetVC OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "TDM services VC offset."
+::= { genEquipServicesNGPWTDM 3 }
+
+genEquipServicesNGPWLatencyOptimizationAdmin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Enables/Disables the option of choosing a latency-optimized mode for TDM services."
+::= { genEquipServicesNGPWTDM 4 }
+
+
+--
+-- PSN tunnel groups table, (addition for PWC Phase-2)
+--
+genEquipServicesPWPSNTunnelGroupsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipServicesPWPSNTunnelGroupsEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table allows configuration of PSN protection groups for pseudowire service path protection."
+ ::= { genEquipServicesPW 10 }
+
+genEquipServicesPWPSNTunnelGroupsEntry OBJECT-TYPE
+ SYNTAX GenEquipServicesPWPSNTunnelGroupsEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This entry table allows configuration of PSN protection groups for pseudowire service path protection."
+ INDEX { genEquipServicesPWPSNTunnelGroupsTunnelGroupID }
+ ::= { genEquipServicesPWPSNTunnelGroupsTable 1 }
+
+GenEquipServicesPWPSNTunnelGroupsEntry ::=
+ SEQUENCE {
+ genEquipServicesPWPSNTunnelGroupsTunnelGroupID
+ INTEGER,
+ genEquipServicesPWPSNTunnelGroupsTunnelIDPrimary
+ INTEGER,
+ genEquipServicesPWPSNTunnelGroupsTunnelIDSecondary
+ INTEGER,
+ genEquipServicesPWPSNTunnelGroupsSwitchToStandby
+ OffOn,
+ genEquipServicesPWPSNTunnelGroupsRowStatus
+ RowStatus
+}
+
+genEquipServicesPWPSNTunnelGroupsTunnelGroupID OBJECT-TYPE
+ SYNTAX INTEGER (1..64)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "PSN Tunnel Group ID."
+::= { genEquipServicesPWPSNTunnelGroupsEntry 1 }
+
+genEquipServicesPWPSNTunnelGroupsTunnelIDPrimary OBJECT-TYPE
+ SYNTAX INTEGER (1..128)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Primary PSN tunnel ID."
+
+::= { genEquipServicesPWPSNTunnelGroupsEntry 2 }
+
+genEquipServicesPWPSNTunnelGroupsTunnelIDSecondary OBJECT-TYPE
+ SYNTAX INTEGER (1..128)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Secondary PSN tunnel ID."
+
+::= { genEquipServicesPWPSNTunnelGroupsEntry 3 }
+
+genEquipServicesPWPSNTunnelGroupsSwitchToStandby OBJECT-TYPE
+ SYNTAX OffOn
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Force a switch from primary to secondary tunnel."
+
+::= { genEquipServicesPWPSNTunnelGroupsEntry 4 }
+
+genEquipServicesPWPSNTunnelGroupsRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This value is the status of the entry."
+::= { genEquipServicesPWPSNTunnelGroupsEntry 30 }
+
+-- PSN tunnel groups status table, (addition for PWC Phase-2)
+
+genEquipServicesPWPSNTunnelGroupStatusTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipServicesPWPSNTunnelGroupStatusEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table allows monitoring of PSN protection groups status."
+ ::= { genEquipServicesPW 11 }
+
+genEquipServicesPWPSNTunnelGroupStatusEntry OBJECT-TYPE
+ SYNTAX GenEquipServicesPWPSNTunnelGroupStatusEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table entry allows monitoring of PSN protection groups status."
+ INDEX { genEquipServicesPWPSNTunnelGroupStatusTunnelGroupID }
+ ::= { genEquipServicesPWPSNTunnelGroupStatusTable 1 }
+
+GenEquipServicesPWPSNTunnelGroupStatusEntry ::=
+ SEQUENCE {
+ genEquipServicesPWPSNTunnelGroupStatusTunnelGroupID
+ INTEGER,
+ genEquipServicesPWPSNTunnelGroupStatusCurrActiveTunnel
+ INTEGER,
+ genEquipServicesPWPSNTunnelGroupStatusNumProtSwitches
+ INTEGER
+}
+
+genEquipServicesPWPSNTunnelGroupStatusTunnelGroupID OBJECT-TYPE
+ SYNTAX INTEGER (1..64)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "PSN Tunnel Group ID."
+::= { genEquipServicesPWPSNTunnelGroupStatusEntry 1 }
+
+genEquipServicesPWPSNTunnelGroupStatusCurrActiveTunnel OBJECT-TYPE
+ SYNTAX INTEGER {
+ primary(0),
+ secondary(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Currently active PSN tunnel."
+
+::= { genEquipServicesPWPSNTunnelGroupStatusEntry 2 }
+
+genEquipServicesPWPSNTunnelGroupStatusNumProtSwitches OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Counter of PSN tunnel protection switches."
+
+::= { genEquipServicesPWPSNTunnelGroupStatusEntry 3 }
+
+-- SOAM MD definitions table, (addition for PWC Phase-2)
+
+genEquipServicesPWSOAMMDTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipServicesPWSOAMMDEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table allows configuration of Ethernet OAM Maintenance Domains for service monitoring and path protection."
+ ::= { genEquipServicesPW 12 }
+
+genEquipServicesPWSOAMMDEntry OBJECT-TYPE
+ SYNTAX GenEquipServicesPWSOAMMDEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table entry allows configuration of Ethernet OAM Maintenance Domains for service monitoring and path protection."
+ INDEX { genEquipServicesPWSOAMMDDomainID }
+ ::= { genEquipServicesPWSOAMMDTable 1 }
+
+GenEquipServicesPWSOAMMDEntry ::=
+ SEQUENCE {
+ genEquipServicesPWSOAMMDDomainID
+ INTEGER,
+ genEquipServicesPWSOAMMDDomainName
+ DisplayString,
+ genEquipServicesPWSOAMMDDomainLevel
+ INTEGER,
+ genEquipServicesPWSOAMMDRowStatus
+ RowStatus
+}
+
+genEquipServicesPWSOAMMDDomainID OBJECT-TYPE
+ SYNTAX INTEGER (1..8)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Domain ID."
+::= { genEquipServicesPWSOAMMDEntry 1 }
+
+genEquipServicesPWSOAMMDDomainName OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Domain Name."
+
+::= { genEquipServicesPWSOAMMDEntry 2 }
+
+genEquipServicesPWSOAMMDDomainLevel OBJECT-TYPE
+ SYNTAX INTEGER (0..7)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Domain Level."
+
+::= { genEquipServicesPWSOAMMDEntry 3 }
+
+genEquipServicesPWSOAMMDRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This value is the status of the entry."
+::= { genEquipServicesPWSOAMMDEntry 30 }
+
+-- SOAM MA definitions table, (addition for PWC Phase-2)
+
+genEquipServicesPWSOAMMATable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipServicesPWSOAMMAEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table allows configuration of Ethernet OAM Maintenance Association for service monitoring and path protection."
+ ::= { genEquipServicesPW 13 }
+
+genEquipServicesPWSOAMMAEntry OBJECT-TYPE
+ SYNTAX GenEquipServicesPWSOAMMAEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table entry allows configuration of Ethernet OAM Maintenance Association for service monitoring and path protection."
+ INDEX { genEquipServicesPWSOAMMALocalID }
+ ::= { genEquipServicesPWSOAMMATable 1 }
+
+GenEquipServicesPWSOAMMAEntry ::=
+ SEQUENCE {
+ genEquipServicesPWSOAMMALocalID
+ INTEGER,
+ genEquipServicesPWSOAMMALocalName
+ DisplayString,
+ genEquipServicesPWSOAMMADomainID
+ INTEGER,
+ genEquipServicesPWSOAMMAAdmin
+ EnableDisable,
+ genEquipServicesPWSOAMMALocalMEP
+ INTEGER,
+ genEquipServicesPWSOAMMARemoteMEP
+ INTEGER,
+ genEquipServicesPWSOAMMAVlanType
+ INTEGER,
+ genEquipServicesPWSOAMMAVlanID
+ INTEGER,
+ genEquipServicesPWSOAMMACCMInterval
+ INTEGER,
+ genEquipServicesPWSOAMMACCMAdmin
+ EnableDisable,
+ genEquipServicesPWSOAMMACCMPriority
+ INTEGER,
+ genEquipServicesPWSOAMMARemoteMEPAddr
+ OCTET STRING,
+ genEquipServicesPWSOAMMADefects
+ INTEGER,
+ genEquipServicesPWSOAMMARowStatus
+ RowStatus
+}
+
+genEquipServicesPWSOAMMALocalID OBJECT-TYPE
+ SYNTAX INTEGER (1..32)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Maintenance Association local ID."
+::= { genEquipServicesPWSOAMMAEntry 1 }
+
+genEquipServicesPWSOAMMALocalName OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Maintenance Association local Name."
+
+::= { genEquipServicesPWSOAMMAEntry 2 }
+
+genEquipServicesPWSOAMMADomainID OBJECT-TYPE
+ SYNTAX INTEGER (0..7)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Maintenance Association domain ID."
+
+::= { genEquipServicesPWSOAMMAEntry 3 }
+
+genEquipServicesPWSOAMMAAdmin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Maintenance Association Admin."
+
+::= { genEquipServicesPWSOAMMAEntry 4 }
+
+genEquipServicesPWSOAMMALocalMEP OBJECT-TYPE
+ SYNTAX INTEGER (1..8191)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Maintenance Association local MEP ID."
+
+::= { genEquipServicesPWSOAMMAEntry 5 }
+
+genEquipServicesPWSOAMMARemoteMEP OBJECT-TYPE
+ SYNTAX INTEGER (1..8191)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Maintenance Association remote MEP ID."
+
+::= { genEquipServicesPWSOAMMAEntry 6 }
+
+genEquipServicesPWSOAMMAVlanType OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0),
+ c-type(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "VLAN type of the Maintenance Association."
+
+::= { genEquipServicesPWSOAMMAEntry 7 }
+
+genEquipServicesPWSOAMMAVlanID OBJECT-TYPE
+ SYNTAX INTEGER (0..4090)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "VLAN Id of the Maintenance Association."
+
+::= { genEquipServicesPWSOAMMAEntry 8 }
+
+genEquipServicesPWSOAMMACCMInterval OBJECT-TYPE
+ SYNTAX INTEGER {
+ nInvalid(0),
+ n3-3-msec(1),
+ n10-msec(2),
+ n100-msec(3),
+ n1s(4),
+ n10s(5),
+ n1min(6),
+ n10min(7)
+ }
+
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "CCM Interval."
+
+::= { genEquipServicesPWSOAMMAEntry 9 }
+
+genEquipServicesPWSOAMMACCMAdmin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Maintenance Association CCM admin."
+
+::= { genEquipServicesPWSOAMMAEntry 10 }
+
+genEquipServicesPWSOAMMACCMPriority OBJECT-TYPE
+ SYNTAX INTEGER (0..7)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "CCM Priority."
+
+::= { genEquipServicesPWSOAMMAEntry 11 }
+
+genEquipServicesPWSOAMMARemoteMEPAddr OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..6))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "MAC Address of the Maintenance Association Remote MEP."
+
+::= { genEquipServicesPWSOAMMAEntry 12 }
+
+genEquipServicesPWSOAMMADefects OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Bitmap field: no-alarm (0), RDI (1), MAC-status (2), remote CCM (4), error CCM (8),
+ Cross-connection CCM (16), AIS (32)."
+
+::= { genEquipServicesPWSOAMMAEntry 13 }
+
+genEquipServicesPWSOAMMARowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This value is the status of the entry."
+::= { genEquipServicesPWSOAMMAEntry 30 }
+
+
+--
+-- The following are the Services part of Switch application tables
+--
+genEquipServicesCet OBJECT IDENTIFIER ::= {genEquipServices 5}
+
+genEquipServicesCetGeneral OBJECT IDENTIFIER ::= {genEquipServicesCet 1}
+
+genEquipServicesCetSvlanEtherType OBJECT-TYPE
+ SYNTAX INTEGER {
+ ether-type-0x88a8(0),
+ ether-type-0x9100(1),
+ ether-type-0x9200(2),
+ ether-type-0x8100(3)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "S VLAN Ether type."
+::= { genEquipServicesCetGeneral 1 }
+
+genEquipServicesCetAgingTimeout OBJECT-TYPE
+ SYNTAX INTEGER (15..3825)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "MAC forwarding entry aging timeout in seconds."
+::= { genEquipServicesCetGeneral 2 }
+
+
+--
+-- Switch Application sw-ap-l3-srv-config-table
+--
+
+genEquipServicesCetConfigTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipServicesCetConfigEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Ethernet Services configuration table -
+ the table describes the connectivity between the interface of the switch."
+ ::= { genEquipServicesCet 2 }
+
+genEquipServicesCetConfigEntry OBJECT-TYPE
+ SYNTAX GenEquipServicesCetConfigEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Ethernet Services configuration table entry -
+ the table describes the connectivity between the interface of the switch."
+ INDEX { genEquipServicesCetConfigIndex }
+ ::= { genEquipServicesCetConfigTable 1 }
+
+GenEquipServicesCetConfigEntry ::=
+ SEQUENCE {
+ genEquipServicesCetConfigIndex
+ INTEGER,
+ genEquipServicesCetConfigType
+ ServiceType,
+ genEquipServicesCetConfigAdmin
+ ServiceAdmin,
+ genEquipServicesCetConfigMacTableSize
+ INTEGER,
+ genEquipServicesCetConfigDefaultCos
+ INTEGER,
+ genEquipServicesCetConfigCosMode
+ ServiceCosMode,
+ genEquipServicesCetConfigEvcId
+ DisplayString,
+ genEquipServicesCetConfigEvcDescription
+ DisplayString,
+ genEquipServicesCetConfigSplitHorizon
+ EnableDisable,
+ genEquipServicesCetConfigResiliencyProtocolInstance
+ INTEGER,
+ genEquipServicesCetConfigProtectingTrail
+ INTEGER,
+ genEquipServicesCetConfigProtectingTrailIndex
+ INTEGER,
+ genEquipServicesCetConfigServiceSubType
+ ServiceSubType,
+ genEquipServicesCetConfigTrailIndex
+ INTEGER,
+ genEquipServicesCetConfigRowStatus
+ RowStatus
+}
+
+
+genEquipServicesCetConfigIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..1025)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Service ID."
+::= { genEquipServicesCetConfigEntry 1 }
+
+genEquipServicesCetConfigType OBJECT-TYPE
+ SYNTAX ServiceType
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Ethernet Service Type (Management, MP, P2P)."
+::= { genEquipServicesCetConfigEntry 2 }
+
+genEquipServicesCetConfigAdmin OBJECT-TYPE
+ SYNTAX ServiceAdmin
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Service Admin state."
+::= { genEquipServicesCetConfigEntry 3 }
+
+genEquipServicesCetConfigMacTableSize OBJECT-TYPE
+ SYNTAX INTEGER (16..131072)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "MAC Table size of the service,granularity of 16."
+::= { genEquipServicesCetConfigEntry 4 }
+
+genEquipServicesCetConfigDefaultCos OBJECT-TYPE
+ SYNTAX INTEGER (0..7)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Service default CoS."
+::= { genEquipServicesCetConfigEntry 5 }
+
+genEquipServicesCetConfigCosMode OBJECT-TYPE
+ SYNTAX ServiceCosMode
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Service CoS Color mode."
+::= { genEquipServicesCetConfigEntry 6 }
+
+genEquipServicesCetConfigEvcId OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Ethernet Virtual Connection (EVC) ID."
+::= { genEquipServicesCetConfigEntry 7 }
+
+genEquipServicesCetConfigEvcDescription OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Ethernet Virtual Connection (EVC) Description."
+::= { genEquipServicesCetConfigEntry 8 }
+
+genEquipServicesCetConfigSplitHorizon OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Split Horizon group Admin."
+::= { genEquipServicesCetConfigEntry 9 }
+
+genEquipServicesCetConfigResiliencyProtocolInstance OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Resiliency Protocol Instance."
+::= { genEquipServicesCetConfigEntry 10 }
+
+genEquipServicesCetConfigProtectingTrail OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Protecting trail."
+::= { genEquipServicesCetConfigEntry 11 }
+
+genEquipServicesCetConfigProtectingTrailIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Protecting trail id."
+::= { genEquipServicesCetConfigEntry 12 }
+
+genEquipServicesCetConfigServiceSubType OBJECT-TYPE
+ SYNTAX ServiceSubType
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Service sub type (Ethernet / TDM / PWE)"
+::= { genEquipServicesCetConfigEntry 13 }
+
+genEquipServicesCetConfigTrailIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "TDM Trail ID"
+::= { genEquipServicesCetConfigEntry 14 }
+
+genEquipServicesCetConfigRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Table Mib Row Status."
+::= { genEquipServicesCetConfigEntry 30 }
+
+--
+-- Switch Application sw-ap-srv-status-multicast
+--
+
+genEquipServicesCetStatusTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipServicesCetStatusEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Ethernet Services status table - the table describes the status of the configured services."
+ ::= { genEquipServicesCet 3 }
+
+genEquipServicesCetStatusEntry OBJECT-TYPE
+ SYNTAX GenEquipServicesCetStatusEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Ethernet Services status table - the table describes the status of the configured services entry."
+ INDEX { genEquipServicesCetStatusIndex }
+ ::= { genEquipServicesCetStatusTable 1 }
+
+GenEquipServicesCetStatusEntry ::=
+ SEQUENCE {
+ genEquipServicesCetStatusIndex
+ INTEGER,
+ genEquipServicesCetStatusMulticast
+ EnableDisable
+}
+
+
+genEquipServicesCetStatusIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..1025)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Service ID."
+::= { genEquipServicesCetStatusEntry 1 }
+
+genEquipServicesCetStatusMulticast OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Configured Multicast Group."
+::= { genEquipServicesCetStatusEntry 2 }
+
+--
+-- Switch Application sw-ap-l4-srv-sp-config-table
+--
+genEquipServicesCetSpConfigTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipServicesCetSpConfigEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Ethernet Service Points (SP) configuration table -
+ this table describes the ingress and egress attributes (operation) per SPs of each service."
+ ::= { genEquipServicesCet 4 }
+
+genEquipServicesCetSpConfigEntry OBJECT-TYPE
+ SYNTAX GenEquipServicesCetSpConfigEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Ethernet Service Points (SP) configuration table entry -
+ this table describes the ingress and egress attributes (operation) per SPs of each service."
+ INDEX { genEquipServicesCetSpConfigServiceIndex,
+ genEquipServicesCetSpConfigServicePointIndex }
+ ::= { genEquipServicesCetSpConfigTable 1 }
+
+GenEquipServicesCetSpConfigEntry ::=
+ SEQUENCE {
+ genEquipServicesCetSpConfigServiceIndex
+ INTEGER,
+ genEquipServicesCetSpConfigServicePointIndex
+ INTEGER,
+ genEquipServicesCetSpConfigSpType
+ SPType,
+ genEquipServicesCetSpConfigSpSubtype
+ SPSubType,
+ genEquipServicesCetSpConfigSpName
+ DisplayString,
+ genEquipServicesCetSpConfigIfIndex
+ INTEGER,
+ genEquipServicesCetSpConfigSvlanEncap
+ INTEGER,
+ genEquipServicesCetSpConfigCvlanEncap
+ INTEGER,
+ genEquipServicesCetSpConfigLearning
+ EnableDisable,
+ genEquipServicesCetSpConfigFlooding
+ DisableAllowed,
+ genEquipServicesCetSpConfigBroadcast
+ DisableAllowed,
+ genEquipServicesCetSpConfigCosMode
+ SPCosMode,
+ genEquipServicesCetSpConfigDefCos
+ INTEGER,
+ genEquipServicesCetSpConfigPclProfileId
+ INTEGER,
+ genEquipServicesCetSpConfigPclAdmin
+ EnableDisable,
+ genEquipServicesCetSpConfigMonitorCounterGroup
+ INTEGER,
+ genEquipServicesCetSpConfigSplitHorizon
+ SplitHorizonGroup,
+ genEquipServicesCetSpConfigSvlanEgressPreserve
+ EnableDisable,
+ genEquipServicesCetSpConfigSvlanCosPreserve
+ EnableDisable,
+ genEquipServicesCetSpConfigCvlanEgressPreserve
+ EnableDisable,
+ genEquipServicesCetSpConfigCvlanCosPreserve
+ EnableDisable,
+ genEquipServicesCetSpConfigMarkingMode
+ EnableDisable,
+ genEquipServicesCetSpConfigServiceClassId
+ INTEGER,
+ genEquipServicesCetSpConfigTcamClassification
+ INTEGER,
+ genEquipServicesCetSpConfigRowStatus
+ RowStatus
+}
+
+
+genEquipServicesCetSpConfigServiceIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..1025)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Service ID."
+::= { genEquipServicesCetSpConfigEntry 1 }
+
+genEquipServicesCetSpConfigServicePointIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..32)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Service Point ID."
+::= { genEquipServicesCetSpConfigEntry 2 }
+
+genEquipServicesCetSpConfigSpType OBJECT-TYPE
+ SYNTAX SPType
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Service Point Type (SAP, SNP, PIPE, MNG)."
+::= { genEquipServicesCetSpConfigEntry 3 }
+
+genEquipServicesCetSpConfigSpSubtype OBJECT-TYPE
+ SYNTAX SPSubType
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The Service Point Attached Interface Type."
+::= { genEquipServicesCetSpConfigEntry 4 }
+
+genEquipServicesCetSpConfigSpName OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Service Point Name."
+::= { genEquipServicesCetSpConfigEntry 5 }
+
+genEquipServicesCetSpConfigIfIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Ethernet Logical port if-index ID."
+::= { genEquipServicesCetSpConfigEntry 6 }
+
+genEquipServicesCetSpConfigSvlanEncap OBJECT-TYPE
+ SYNTAX INTEGER (4096..4097)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "S-Vlan Encapsulation."
+::= { genEquipServicesCetSpConfigEntry 7 }
+
+genEquipServicesCetSpConfigCvlanEncap OBJECT-TYPE
+ SYNTAX INTEGER (0..4097)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "C-Vlan Encapsulation."
+::= { genEquipServicesCetSpConfigEntry 8 }
+
+genEquipServicesCetSpConfigLearning OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Service Point Learning Admin (disable / enable)."
+::= { genEquipServicesCetSpConfigEntry 9 }
+
+genEquipServicesCetSpConfigFlooding OBJECT-TYPE
+ SYNTAX DisableAllowed
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "SP Ingress aatribute - Allow Flooding of the incoming packet."
+::= { genEquipServicesCetSpConfigEntry 10 }
+
+genEquipServicesCetSpConfigBroadcast OBJECT-TYPE
+ SYNTAX DisableAllowed
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "SP Ingress aatribute - Allow Broadcast of the incoming packet."
+::= { genEquipServicesCetSpConfigEntry 11 }
+
+genEquipServicesCetSpConfigCosMode OBJECT-TYPE
+ SYNTAX SPCosMode
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Service Point CoS Color mode."
+::= { genEquipServicesCetSpConfigEntry 12 }
+
+genEquipServicesCetSpConfigDefCos OBJECT-TYPE
+ SYNTAX INTEGER (0..7)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Service Point Default CoS."
+::= { genEquipServicesCetSpConfigEntry 13 }
+
+genEquipServicesCetSpConfigPclProfileId OBJECT-TYPE
+ SYNTAX INTEGER (0..63)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "pcl-profile-id."
+::= { genEquipServicesCetSpConfigEntry 14 }
+
+genEquipServicesCetSpConfigPclAdmin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "PCL Admin."
+::= { genEquipServicesCetSpConfigEntry 15 }
+
+genEquipServicesCetSpConfigMonitorCounterGroup OBJECT-TYPE
+ SYNTAX INTEGER (1..16)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "SP Ingress attribute - Assign the SP to a specific Monitor Counters Group."
+::= { genEquipServicesCetSpConfigEntry 16 }
+
+genEquipServicesCetSpConfigSplitHorizon OBJECT-TYPE
+ SYNTAX SplitHorizonGroup
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Split Horizon Group."
+::= { genEquipServicesCetSpConfigEntry 17 }
+
+genEquipServicesCetSpConfigSvlanEgressPreserve OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "SP Egress attribute - Preserve the S VLAN as it was on the Ingress Service Point."
+::= { genEquipServicesCetSpConfigEntry 18 }
+
+genEquipServicesCetSpConfigSvlanCosPreserve OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "SP Egress attribute - Preserve the S VLAN CoS as it was on the Ingress Service Point."
+::= { genEquipServicesCetSpConfigEntry 19 }
+
+genEquipServicesCetSpConfigCvlanEgressPreserve OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "SP Egress attribute - Preserve the C VLAN as it was on the Ingress Service Point."
+::= { genEquipServicesCetSpConfigEntry 20 }
+
+genEquipServicesCetSpConfigCvlanCosPreserve OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "SP Egress attribute - Preserve the C VLAN CoS as it was on the Ingress Service Point."
+::= { genEquipServicesCetSpConfigEntry 21 }
+
+genEquipServicesCetSpConfigMarkingMode OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "SP Ingress attribute - Enable / Disable Marking of the incoming packet."
+::= { genEquipServicesCetSpConfigEntry 22 }
+
+genEquipServicesCetSpConfigServiceClassId OBJECT-TYPE
+ SYNTAX INTEGER (0..63)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "SP Egress attribute - Service Bundle ID."
+::= { genEquipServicesCetSpConfigEntry 23 }
+
+genEquipServicesCetSpConfigTcamClassification OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "TCAM-Classification."
+::= { genEquipServicesCetSpConfigEntry 24 }
+
+genEquipServicesCetSpConfigRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Table Mib Row Status."
+::= { genEquipServicesCetSpConfigEntry 30 }
+
+--
+-- Switch Application sw-ap-l4-srv-sp-ingress-policer-profile-association-to-cos-table
+--
+
+genEquipServicesCetSpPolicerAssociationTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipServicesCetSpPolicerAssociationEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Service Point and Service Point CoS Policing configuration table."
+ ::= { genEquipServicesCet 5 }
+
+genEquipServicesCetSpPolicerAssociationEntry OBJECT-TYPE
+ SYNTAX GenEquipServicesCetSpPolicerAssociationEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Service Point and Service Point CoS Policing configuration table."
+ INDEX { genEquipServicesCetSpPolicerAssociationServiceIndex,
+ genEquipServicesCetSpPolicerAssociationSpIndex }
+ ::= { genEquipServicesCetSpPolicerAssociationTable 1 }
+
+GenEquipServicesCetSpPolicerAssociationEntry ::=
+ SEQUENCE {
+ genEquipServicesCetSpPolicerAssociationServiceIndex
+ INTEGER,
+ genEquipServicesCetSpPolicerAssociationSpIndex
+ INTEGER,
+ genEquipServicesCetSpPolicerAssociationSpPolicerAdmin
+ EnableDisable,
+ genEquipServicesCetSpPolicerAssociationCos0Profile
+ INTEGER,
+ genEquipServicesCetSpPolicerAssociationCos0Admin
+ EnableDisable,
+ genEquipServicesCetSpPolicerAssociationCos1Profile
+ INTEGER,
+ genEquipServicesCetSpPolicerAssociationCos1Admin
+ EnableDisable,
+ genEquipServicesCetSpPolicerAssociationCos2Profile
+ INTEGER,
+ genEquipServicesCetSpPolicerAssociationCos2Admin
+ INTEGER,
+ genEquipServicesCetSpPolicerAssociationCos3Profile
+ INTEGER,
+ genEquipServicesCetSpPolicerAssociationCos3Admin
+ DisableAllowed,
+ genEquipServicesCetSpPolicerAssociationCos4Profile
+ INTEGER,
+ genEquipServicesCetSpPolicerAssociationCos4Admin
+ EnableDisable,
+ genEquipServicesCetSpPolicerAssociationCos5Profile
+ INTEGER,
+ genEquipServicesCetSpPolicerAssociationCos5Admin
+ EnableDisable,
+ genEquipServicesCetSpPolicerAssociationCos6Profile
+ INTEGER,
+ genEquipServicesCetSpPolicerAssociationCos6Admin
+ EnableDisable,
+ genEquipServicesCetSpPolicerAssociationCos7Profile
+ INTEGER,
+ genEquipServicesCetSpPolicerAssociationCos7Admin
+ EnableDisable,
+ genEquipServicesCetSpPolicerAssociationRowStatus
+ RowStatus
+}
+
+
+genEquipServicesCetSpPolicerAssociationServiceIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..1025)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Service ID."
+::= { genEquipServicesCetSpPolicerAssociationEntry 1 }
+
+genEquipServicesCetSpPolicerAssociationSpIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..32)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Service Point ID."
+::= { genEquipServicesCetSpPolicerAssociationEntry 2 }
+
+genEquipServicesCetSpPolicerAssociationSpPolicerAdmin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Service Point Policer Admin (enable / disable)."
+::= { genEquipServicesCetSpPolicerAssociationEntry 3 }
+
+genEquipServicesCetSpPolicerAssociationCos0Profile OBJECT-TYPE
+ SYNTAX INTEGER (1..256)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "CoS 0 Policer attached Profile ID."
+::= { genEquipServicesCetSpPolicerAssociationEntry 4 }
+
+genEquipServicesCetSpPolicerAssociationCos0Admin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "CoS 0 Policer Admin (enable / disable)."
+::= { genEquipServicesCetSpPolicerAssociationEntry 5 }
+
+genEquipServicesCetSpPolicerAssociationCos1Profile OBJECT-TYPE
+ SYNTAX INTEGER (1..256)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "CoS 1 Policer attached Profile ID."
+::= { genEquipServicesCetSpPolicerAssociationEntry 6 }
+
+genEquipServicesCetSpPolicerAssociationCos1Admin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "CoS 1 Policer Admin (enable / disable)."
+::= { genEquipServicesCetSpPolicerAssociationEntry 7 }
+
+genEquipServicesCetSpPolicerAssociationCos2Profile OBJECT-TYPE
+ SYNTAX INTEGER (1..256)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "CoS 2 Policer attached Profile ID."
+::= { genEquipServicesCetSpPolicerAssociationEntry 8 }
+
+genEquipServicesCetSpPolicerAssociationCos2Admin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "CoS 2 Policer Admin (enable / disable)."
+::= { genEquipServicesCetSpPolicerAssociationEntry 9 }
+
+genEquipServicesCetSpPolicerAssociationCos3Profile OBJECT-TYPE
+ SYNTAX INTEGER (1..256)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "CoS 3 Policer attached Profile ID."
+::= { genEquipServicesCetSpPolicerAssociationEntry 10 }
+
+genEquipServicesCetSpPolicerAssociationCos3Admin OBJECT-TYPE
+ SYNTAX DisableAllowed
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "CoS 3 Policer Admin (enable / disable)."
+::= { genEquipServicesCetSpPolicerAssociationEntry 11 }
+
+genEquipServicesCetSpPolicerAssociationCos4Profile OBJECT-TYPE
+ SYNTAX SPCosMode (1..256)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "CoS 4 Policer attached Profile ID."
+::= { genEquipServicesCetSpPolicerAssociationEntry 12 }
+
+genEquipServicesCetSpPolicerAssociationCos4Admin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "CoS 4 Policer Admin (enable / disable)."
+::= { genEquipServicesCetSpPolicerAssociationEntry 13 }
+
+genEquipServicesCetSpPolicerAssociationCos5Profile OBJECT-TYPE
+ SYNTAX INTEGER (1..256)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "CoS 5 Policer attached Profile ID."
+::= { genEquipServicesCetSpPolicerAssociationEntry 14 }
+
+genEquipServicesCetSpPolicerAssociationCos5Admin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "CoS 5 Policer Admin (enable / disable)."
+::= { genEquipServicesCetSpPolicerAssociationEntry 15 }
+
+genEquipServicesCetSpPolicerAssociationCos6Profile OBJECT-TYPE
+ SYNTAX INTEGER (1..256)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "CoS 6 Policer attached Profile ID."
+::= { genEquipServicesCetSpPolicerAssociationEntry 16 }
+
+genEquipServicesCetSpPolicerAssociationCos6Admin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "CoS 6 Policer Admin (enable / disable)."
+::= { genEquipServicesCetSpPolicerAssociationEntry 17 }
+
+genEquipServicesCetSpPolicerAssociationCos7Profile OBJECT-TYPE
+ SYNTAX INTEGER (1..256)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "CoS 7 Policer attached Profile ID."
+::= { genEquipServicesCetSpPolicerAssociationEntry 18 }
+
+genEquipServicesCetSpPolicerAssociationCos7Admin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "CoS 7 Policer Admin (enable / disable)."
+::= { genEquipServicesCetSpPolicerAssociationEntry 19 }
+
+genEquipServicesCetSpPolicerAssociationRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Table Mib Row Status."
+::= { genEquipServicesCetSpPolicerAssociationEntry 30 }
+
+--
+-- Switch Application sw-ap-l4-srv-sp-vlan-config-table
+--
+
+genEquipServicesCetSpVlanMappingTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipServicesCetSpVlanMappingEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "The table holds the VLAN TAG ID that build a single ingress classification of Port+OutterVLAN+InnerVLAN to Service Point."
+ ::= { genEquipServicesCet 6 }
+
+genEquipServicesCetSpVlanMappingEntry OBJECT-TYPE
+ SYNTAX GenEquipServicesCetSpVlanMappingEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "The table holds the VLAN TAG ID that build a single ingress classification of Port+OutterVLAN+InnerVLAN to Service Point."
+ INDEX { genEquipServicesCetSpVlanMappingServiceId,
+ genEquipServicesCetSpVlanMappingSpId,
+ genEquipServicesCetSpVlanMappingSvlanIndex,
+ genEquipServicesCetSpVlanMappingCvlanIndex }
+ ::= { genEquipServicesCetSpVlanMappingTable 1 }
+
+GenEquipServicesCetSpVlanMappingEntry ::=
+ SEQUENCE {
+ genEquipServicesCetSpVlanMappingServiceId
+ INTEGER,
+ genEquipServicesCetSpVlanMappingSpId
+ INTEGER,
+ genEquipServicesCetSpVlanMappingSvlanIndex
+ INTEGER,
+ genEquipServicesCetSpVlanMappingCvlanIndex
+ INTEGER,
+ genEquipServicesCetSpVlanMappingVlanCosOverride
+ TrueFalse,
+ genEquipServicesCetSpVlanMappingVlanDefCos
+ INTEGER,
+ genEquipServicesCetSpVlanMappingColor
+ GreenYellow,
+ genEquipServicesCetSpVlanMappingIfIndex
+ INTEGER,
+ genEquipServicesCetSpVlanMappingIfSlotIndex
+ INTEGER,
+ genEquipServicesCetSpVlanMappingIfPortIndex
+ INTEGER,
+ genEquipServicesCetSpVlanMappingRowStatus
+ RowStatus
+}
+
+
+genEquipServicesCetSpVlanMappingServiceId OBJECT-TYPE
+ SYNTAX INTEGER (1..1025)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Service ID."
+::= { genEquipServicesCetSpVlanMappingEntry 1 }
+
+genEquipServicesCetSpVlanMappingSpId OBJECT-TYPE
+ SYNTAX INTEGER (1..32)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Service Point ID."
+::= { genEquipServicesCetSpVlanMappingEntry 2 }
+
+genEquipServicesCetSpVlanMappingSvlanIndex OBJECT-TYPE
+ SYNTAX INTEGER (0..4097)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "S-Vlan Encapsulation."
+::= { genEquipServicesCetSpVlanMappingEntry 3 }
+
+genEquipServicesCetSpVlanMappingCvlanIndex OBJECT-TYPE
+ SYNTAX INTEGER (0..4097)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "C-Vlan Encapsulation."
+::= { genEquipServicesCetSpVlanMappingEntry 4 }
+
+genEquipServicesCetSpVlanMappingVlanCosOverride OBJECT-TYPE
+ SYNTAX TrueFalse
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The CoS Value field is valid."
+::= { genEquipServicesCetSpVlanMappingEntry 5 }
+
+genEquipServicesCetSpVlanMappingVlanDefCos OBJECT-TYPE
+ SYNTAX INTEGER (0..7)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "CoS overwrite value."
+::= { genEquipServicesCetSpVlanMappingEntry 6 }
+
+genEquipServicesCetSpVlanMappingColor OBJECT-TYPE
+ SYNTAX GreenYellow
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Service Point COLOR."
+::= { genEquipServicesCetSpVlanMappingEntry 7 }
+
+genEquipServicesCetSpVlanMappingIfIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Ethernet Logical port if-index table key."
+::= { genEquipServicesCetSpVlanMappingEntry 8 }
+
+genEquipServicesCetSpVlanMappingIfSlotIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Slot index."
+::= { genEquipServicesCetSpVlanMappingEntry 9 }
+
+genEquipServicesCetSpVlanMappingIfPortIndex OBJECT-TYPE
+ SYNTAX INTEGER (0..10)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Port index."
+::= { genEquipServicesCetSpVlanMappingEntry 10 }
+
+genEquipServicesCetSpVlanMappingRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Table Mib Row Status."
+::= { genEquipServicesCetSpVlanMappingEntry 30 }
+
+--
+-- Clear all interface egress queues statistics - sw-ap-l2-if-logical-egress-clear-all-queues-statistics-table
+--
+
+genEquipServicesCETTmPmSpEgressClearAllL2InterfaceQueuesStatisticsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipServicesCETTmPmSpEgressClearAllL2InterfaceQueuesStatisticsEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Clear all interface egress queues statistics."
+ ::= { genEquipServicesCet 7 }
+
+genEquipServicesCETTmPmSpEgressClearAllL2InterfaceQueuesStatisticsEntry OBJECT-TYPE
+ SYNTAX GenEquipServicesCETTmPmSpEgressClearAllL2InterfaceQueuesStatisticsEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Clear all interface egress queues statistics."
+ INDEX { genEquipServicesCETTmPmSpEgressClearAllL2InterfaceQueuesStatisticsIfIndex }
+ ::= { genEquipServicesCETTmPmSpEgressClearAllL2InterfaceQueuesStatisticsTable 1 }
+
+GenEquipServicesCETTmPmSpEgressClearAllL2InterfaceQueuesStatisticsEntry ::=
+ SEQUENCE {
+ genEquipServicesCETTmPmSpEgressClearAllL2InterfaceQueuesStatisticsIfIndex
+ INTEGER,
+ genEquipServicesCETTmPmSpEgressClearAllL2InterfaceQueuesStatisticsClearOnRead
+ NoYes
+}
+
+
+genEquipServicesCETTmPmSpEgressClearAllL2InterfaceQueuesStatisticsIfIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "ifIndex."
+::= { genEquipServicesCETTmPmSpEgressClearAllL2InterfaceQueuesStatisticsEntry 1 }
+
+genEquipServicesCETTmPmSpEgressClearAllL2InterfaceQueuesStatisticsClearOnRead OBJECT-TYPE
+ SYNTAX NoYes
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Clear all statistics for the specific port."
+::= { genEquipServicesCETTmPmSpEgressClearAllL2InterfaceQueuesStatisticsEntry 2 }
+
+--
+-- Clear all Service egress queues statistics - sw-ap-l3-srv-egress-clear-all-queues-statistics-table
+--
+
+genEquipServicesCETTmPmSpEgressClearAllL3ServiceQueuesStatisticsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipServicesCETTmPmSpEgressClearAllL3ServiceQueuesStatisticsEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Clear all Service egress queues statistics."
+ ::= { genEquipServicesCet 8 }
+
+genEquipServicesCETTmPmSpEgressClearAllL3ServiceQueuesStatisticsEntry OBJECT-TYPE
+ SYNTAX GenEquipServicesCETTmPmSpEgressClearAllL3ServiceQueuesStatisticsEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Clear all Service egress queues statistics."
+ INDEX { genEquipServicesCETTmPmSpEgressClearAllL3ServiceQueuesStatisticsIfIndex,
+ genEquipServicesCETTmPmSpEgressClearAllL3ServiceQueuesStatisticsServiceIndex }
+ ::= { genEquipServicesCETTmPmSpEgressClearAllL3ServiceQueuesStatisticsTable 1 }
+
+GenEquipServicesCETTmPmSpEgressClearAllL3ServiceQueuesStatisticsEntry ::=
+ SEQUENCE {
+ genEquipServicesCETTmPmSpEgressClearAllL3ServiceQueuesStatisticsIfIndex
+ INTEGER,
+ genEquipServicesCETTmPmSpEgressClearAllL3ServiceQueuesStatisticsServiceIndex
+ INTEGER,
+ genEquipServicesCETTmPmSpEgressClearAllL3ServiceQueuesStatisticsClearOnRead
+ NoYes
+}
+
+
+genEquipServicesCETTmPmSpEgressClearAllL3ServiceQueuesStatisticsIfIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "ifIndex."
+::= { genEquipServicesCETTmPmSpEgressClearAllL3ServiceQueuesStatisticsEntry 1 }
+
+genEquipServicesCETTmPmSpEgressClearAllL3ServiceQueuesStatisticsServiceIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..63)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Egress service bundle ID."
+::= { genEquipServicesCETTmPmSpEgressClearAllL3ServiceQueuesStatisticsEntry 2 }
+
+genEquipServicesCETTmPmSpEgressClearAllL3ServiceQueuesStatisticsClearOnRead OBJECT-TYPE
+ SYNTAX NoYes
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "clear on read."
+::= { genEquipServicesCETTmPmSpEgressClearAllL3ServiceQueuesStatisticsEntry 3 }
+
+
+--
+-- The following are the Services part of Switch application tables
+--
+genEquipServicesTM OBJECT IDENTIFIER ::= {genEquipServices 6}
+
+-- TM Mapping
+genEquipTmMapping OBJECT IDENTIFIER ::= {genEquipServicesTM 1}
+
+--
+-- Switch Application sw-ap-global-ingress-mapping-802_1ad-up-to-cos-table
+--
+
+genEquipTmMappingSVlanPriToCosTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipTmMappingSVlanPriToCosEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Global 802.1AD classification table to CoS and Color."
+ ::= { genEquipTmMapping 1 }
+
+genEquipTmMappingSVlanPriToCosEntry OBJECT-TYPE
+ SYNTAX GenEquipTmMappingSVlanPriToCosEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Global 802.1AD classification table to CoS and Color entry."
+ INDEX { genEquipTmMappingSVlanPriToCosUpIndex,
+ genEquipTmMappingSVlanPriToCosDeiIndex }
+ ::= { genEquipTmMappingSVlanPriToCosTable 1 }
+
+GenEquipTmMappingSVlanPriToCosEntry ::=
+ SEQUENCE {
+ genEquipTmMappingSVlanPriToCosUpIndex
+ INTEGER,
+ genEquipTmMappingSVlanPriToCosDeiIndex
+ INTEGER,
+ genEquipTmMappingSVlanPriToCosCos
+ INTEGER,
+ genEquipTmMappingSVlanPriToCosColor
+ GreenYellow
+}
+
+
+genEquipTmMappingSVlanPriToCosUpIndex OBJECT-TYPE
+ SYNTAX INTEGER (0..7)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "User Priority bits - Global 802.1AD User Priority and DEI bits classification table to CoS and Color."
+::= { genEquipTmMappingSVlanPriToCosEntry 1 }
+
+genEquipTmMappingSVlanPriToCosDeiIndex OBJECT-TYPE
+ SYNTAX INTEGER (0..1)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "DEI bit - Global 802.1AD User Priority and DEI bits classification table to CoS and Color."
+::= { genEquipTmMappingSVlanPriToCosEntry 2 }
+
+genEquipTmMappingSVlanPriToCosCos OBJECT-TYPE
+ SYNTAX INTEGER (0..7)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "CoS bits - Global 802.1AD User Priority and DEI bits classification table to CoS and Color."
+::= { genEquipTmMappingSVlanPriToCosEntry 3 }
+
+genEquipTmMappingSVlanPriToCosColor OBJECT-TYPE
+ SYNTAX GreenYellow
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Color bit - Global 802.1AD User Priority and DEI bits classification table to CoS and Color."
+::= { genEquipTmMappingSVlanPriToCosEntry 4 }
+
+--
+-- Switch Application sw-ap-global-ingress-mapping-802_1q-up-to-cos-table
+--
+
+genEquipTmMappingCVlanPriToCosTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipTmMappingCVlanPriToCosEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Global 802.1Q classification table to CoS and Color."
+ ::= { genEquipTmMapping 2 }
+
+genEquipTmMappingCVlanPriToCosEntry OBJECT-TYPE
+ SYNTAX GenEquipTmMappingCVlanPriToCosEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Global 802.1Q classification table to CoS and Color entry."
+ INDEX { genEquipTmMappingCVlanPriToCosUpIndex,
+ genEquipTmMappingCVlanPriToCosCfiIndex }
+ ::= { genEquipTmMappingCVlanPriToCosTable 1 }
+
+GenEquipTmMappingCVlanPriToCosEntry ::=
+ SEQUENCE {
+ genEquipTmMappingCVlanPriToCosUpIndex
+ INTEGER,
+ genEquipTmMappingCVlanPriToCosCfiIndex
+ INTEGER,
+ genEquipTmMappingCVlanPriToCosCos
+ INTEGER,
+ genEquipTmMappingCVlanPriToCosColor
+ GreenYellow
+}
+
+
+genEquipTmMappingCVlanPriToCosUpIndex OBJECT-TYPE
+ SYNTAX INTEGER (0..7)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "User Priority bits - Global 802.1Q User Priority and CFI bits classification table to CoS and Color."
+::= { genEquipTmMappingCVlanPriToCosEntry 1 }
+
+genEquipTmMappingCVlanPriToCosCfiIndex OBJECT-TYPE
+ SYNTAX INTEGER (0..1)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "CFI bit - Global 802.1Q User Priority and CFI bits classification table to CoS and Color."
+::= { genEquipTmMappingCVlanPriToCosEntry 2 }
+
+genEquipTmMappingCVlanPriToCosCos OBJECT-TYPE
+ SYNTAX INTEGER (0..7)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "CoS bits - Global 802.1AD User Priority and DEI bits classification table to CoS and Color."
+::= { genEquipTmMappingCVlanPriToCosEntry 3 }
+
+genEquipTmMappingCVlanPriToCosColor OBJECT-TYPE
+ SYNTAX GreenYellow
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Color bit - Global 802.1Q User Priority and CFI bits classification table to CoS and Color."
+::= { genEquipTmMappingCVlanPriToCosEntry 4 }
+
+--
+-- Switch Application sw-ap-global-ingress-mapping-dscp-to-cos-table
+--
+
+genEquipTmMappingDscpToCosTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipTmMappingDscpToCosEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Global DSCP bits classification table to CoS and Color."
+ ::= { genEquipTmMapping 3 }
+
+genEquipTmMappingDscpToCosEntry OBJECT-TYPE
+ SYNTAX GenEquipTmMappingDscpToCosEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Global DSCP bits classification table to CoS and Color entry."
+ INDEX { genEquipTmMappingDscpToCosDscpIndex }
+ ::= { genEquipTmMappingDscpToCosTable 1 }
+
+GenEquipTmMappingDscpToCosEntry ::=
+ SEQUENCE {
+ genEquipTmMappingDscpToCosDscpIndex
+ INTEGER,
+ genEquipTmMappingDscpToCosBinary
+ OCTET STRING,
+ genEquipTmMappingDscpToCosDescription
+ DisplayString,
+ genEquipTmMappingDscpToCosCos
+ INTEGER,
+ genEquipTmMappingDscpToCosColor
+ GreenYellow
+}
+
+
+genEquipTmMappingDscpToCosDscpIndex OBJECT-TYPE
+ SYNTAX INTEGER (0..56)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "DSCP bits - Global DSCP bits classification table to CoS and Color."
+::= { genEquipTmMappingDscpToCosEntry 1 }
+
+genEquipTmMappingDscpToCosBinary OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..6))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Global DSCP bits classification table to CoS and Color."
+::= { genEquipTmMappingDscpToCosEntry 2 }
+
+genEquipTmMappingDscpToCosDescription OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "user description field - Global DSCP bits classification table to CoS and Color."
+::= { genEquipTmMappingDscpToCosEntry 3 }
+
+genEquipTmMappingDscpToCosCos OBJECT-TYPE
+ SYNTAX INTEGER (0..7)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "CoS bits - Global DSCP bits classification table to CoS and Color."
+::= { genEquipTmMappingDscpToCosEntry 4 }
+
+genEquipTmMappingDscpToCosColor OBJECT-TYPE
+ SYNTAX GreenYellow
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Color bit - Global DSCP bits classification table to CoS and Color."
+::= { genEquipTmMappingDscpToCosEntry 5 }
+
+--
+-- Switch Application sw-ap-mapping-mpls-exp-to-cos-color
+--
+
+genEquipTmMappingMPLSExpPriToCosTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipTmMappingMPLSExpPriToCosEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Color bit - Global MPLS EXP bits classification table to CoS and Color."
+ ::= { genEquipTmMapping 4 }
+
+genEquipTmMappingMPLSExpPriToCosEntry OBJECT-TYPE
+ SYNTAX GenEquipTmMappingMPLSExpPriToCosEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Color bit - Global MPLS EXP bits classification table to CoS and Color entry."
+ INDEX { genEquipTmMappingMPLSExpPriToCosMplsExpIndex }
+ ::= { genEquipTmMappingMPLSExpPriToCosTable 1 }
+
+GenEquipTmMappingMPLSExpPriToCosEntry ::=
+ SEQUENCE {
+ genEquipTmMappingMPLSExpPriToCosMplsExpIndex
+ INTEGER,
+ genEquipTmMappingMPLSExpPriToCosCos
+ INTEGER,
+ genEquipTmMappingMPLSExpPriToCosColor
+ GreenYellow
+}
+
+
+genEquipTmMappingMPLSExpPriToCosMplsExpIndex OBJECT-TYPE
+ SYNTAX INTEGER (0..7)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Experimental bits - Global MPLS EXP bits classification table to CoS and Color."
+::= { genEquipTmMappingMPLSExpPriToCosEntry 1 }
+
+
+genEquipTmMappingMPLSExpPriToCosCos OBJECT-TYPE
+ SYNTAX INTEGER (0..7)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "CoS bit - Global MPLS EXP bits classification table to CoS and Color."
+::= { genEquipTmMappingMPLSExpPriToCosEntry 2 }
+
+genEquipTmMappingMPLSExpPriToCosColor OBJECT-TYPE
+ SYNTAX GreenYellow
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Color bit - Global MPLS EXP bits classification table to CoS and Color."
+::= { genEquipTmMappingMPLSExpPriToCosEntry 3 }
+
+--
+-- Switch Application sw-ap-global-egress-marking-802_1ad-table
+--
+
+genEquipTmMarkingSVlanPriTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipTmMarkingSVlanPriEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Global 802.1AD Marking Table User CoS and Color to User Priority bits and DEI."
+ ::= { genEquipTmMapping 5 }
+
+genEquipTmMarkingSVlanPriEntry OBJECT-TYPE
+ SYNTAX GenEquipTmMarkingSVlanPriEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Global 802.1AD Marking Table User CoS and Color to User Priority bits and DEI entry."
+ INDEX { genEquipTmMarkingSVlanPriCosIndex,
+ genEquipTmMarkingSVlanPriColorIndex }
+ ::= { genEquipTmMarkingSVlanPriTable 1 }
+
+GenEquipTmMarkingSVlanPriEntry ::=
+ SEQUENCE {
+ genEquipTmMarkingSVlanPriCosIndex
+ INTEGER,
+ genEquipTmMarkingSVlanPriColorIndex
+ GreenYellow,
+ genEquipTmMarkingSVlanPriUserPriority
+ INTEGER,
+ genEquipTmMarkingSVlanPriDEI
+ INTEGER
+}
+
+
+genEquipTmMarkingSVlanPriCosIndex OBJECT-TYPE
+ SYNTAX INTEGER (0..7)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "CoS bits - Global 802.1AD Marking Table User CoS and Color to User Priority bits and DEI."
+::= { genEquipTmMarkingSVlanPriEntry 1 }
+
+genEquipTmMarkingSVlanPriColorIndex OBJECT-TYPE
+ SYNTAX GreenYellow
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Color bit - Global 802.1AD Marking Table User CoS and Color to User Priority bits and DEI."
+::= { genEquipTmMarkingSVlanPriEntry 2 }
+
+
+genEquipTmMarkingSVlanPriUserPriority OBJECT-TYPE
+ SYNTAX INTEGER (0..7)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "User Priority bits - Global 802.1AD Marking Table User CoS and Color to User Priority bits and DEI."
+::= { genEquipTmMarkingSVlanPriEntry 3 }
+
+genEquipTmMarkingSVlanPriDEI OBJECT-TYPE
+ SYNTAX INTEGER (0..1)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "DEI bit - Global 802.1AD Marking Table User CoS and Color to User Priority bits and DEI."
+::= { genEquipTmMarkingSVlanPriEntry 4 }
+
+--
+-- Switch Application sw-ap-global-egress-marking-802_1q-table
+--
+
+genEquipTmMarkingCVlanPriTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipTmMarkingCVlanPriEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Global 802.1Q Marking Table User CoS and Color to User Priority bits and CFI."
+ ::= { genEquipTmMapping 6 }
+
+genEquipTmMarkingCVlanPriEntry OBJECT-TYPE
+ SYNTAX GenEquipTmMarkingCVlanPriEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Global 802.1Q Marking Table User CoS and Color to User Priority bits and CFI entry."
+ INDEX { genEquipTmMarkingCVlanPriCosIndex,
+ genEquipTmMarkingCVlanPriColorIndex }
+ ::= { genEquipTmMarkingCVlanPriTable 1 }
+
+GenEquipTmMarkingCVlanPriEntry ::=
+ SEQUENCE {
+ genEquipTmMarkingCVlanPriCosIndex
+ INTEGER,
+ genEquipTmMarkingCVlanPriColorIndex
+ GreenYellow,
+ genEquipTmMarkingCVlanPriUserPriority
+ INTEGER,
+ genEquipTmMarkingCVlanPriCFI
+ INTEGER
+}
+
+
+genEquipTmMarkingCVlanPriCosIndex OBJECT-TYPE
+ SYNTAX INTEGER (0..7)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "CoS bits - Global 802.1Q Marking Table User CoS and Color to User Priority bits and CFI."
+::= { genEquipTmMarkingCVlanPriEntry 1 }
+
+genEquipTmMarkingCVlanPriColorIndex OBJECT-TYPE
+ SYNTAX GreenYellow
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Color bit - Global 802.1Q Marking Table User CoS and Color to User Priority bits and CFI."
+::= { genEquipTmMarkingCVlanPriEntry 2 }
+
+
+genEquipTmMarkingCVlanPriUserPriority OBJECT-TYPE
+ SYNTAX INTEGER (0..7)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "User Priority bits - Global 802.1Q Marking Table User CoS and Color to User Priority bits and CFI."
+::= { genEquipTmMarkingCVlanPriEntry 3 }
+
+genEquipTmMarkingCVlanPriCFI OBJECT-TYPE
+ SYNTAX INTEGER (0..1)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "CFI bit - Global 802.1Q Marking Table User CoS and Color to User Priority bits and CFI."
+::= { genEquipTmMarkingCVlanPriEntry 4 }
+
+-- TM Profiles
+genEquipTmProfiles OBJECT IDENTIFIER ::= {genEquipServicesTM 2}
+
+--
+-- Switch Application sw-ap-global-ingress-policer-profiles-list-table
+--
+
+genEquipProfilesPolicerTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipProfilesPolicerEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "General Policer Profile configuration table."
+ ::= { genEquipTmProfiles 1 }
+
+genEquipProfilesPolicerEntry OBJECT-TYPE
+ SYNTAX GenEquipProfilesPolicerEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "General Policer Profile configuration table entry."
+ INDEX { genEquipProfilesPolicerIndex }
+ ::= { genEquipProfilesPolicerTable 1 }
+
+GenEquipProfilesPolicerEntry ::=
+ SEQUENCE {
+ genEquipProfilesPolicerIndex
+ INTEGER,
+ genEquipProfilesPolicerDescription
+ DisplayString,
+ genEquipProfilesPolicerPolicerType
+ PolicerType,
+ genEquipProfilesPolicerCir
+ INTEGER,
+ genEquipProfilesPolicerCbs
+ INTEGER,
+ genEquipProfilesPolicerEir
+ INTEGER,
+ genEquipProfilesPolicerEbs
+ INTEGER,
+ genEquipProfilesPolicerColorMode
+ PolicerColorMode,
+ genEquipProfilesPolicerCouplingFlagMode
+ EnableDisable,
+ genEquipProfilesPolicerDataPlaneId
+ INTEGER,
+ genEquipProfilesPolicerRowStatus
+ RowStatus
+}
+
+
+genEquipProfilesPolicerIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..256)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "User Profile ID number."
+::= { genEquipProfilesPolicerEntry 1 }
+
+genEquipProfilesPolicerDescription OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..21))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Ingress Policer user Description field."
+::= { genEquipProfilesPolicerEntry 2 }
+
+
+genEquipProfilesPolicerPolicerType OBJECT-TYPE
+ SYNTAX PolicerType
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Ingress Policer Type (MEF TrTCM,RFC2697,RFC2698)."
+::= { genEquipProfilesPolicerEntry 3 }
+
+genEquipProfilesPolicerCir OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Ingress Policer Commited Information Rate (CIR)."
+::= { genEquipProfilesPolicerEntry 4 }
+
+genEquipProfilesPolicerCbs OBJECT-TYPE
+ SYNTAX INTEGER (0..128)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Ingress Policer Commited Burst Size (CBS)."
+::= { genEquipProfilesPolicerEntry 5 }
+
+genEquipProfilesPolicerEir OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Ingress Policer Excess Information Rate (EIR)."
+::= { genEquipProfilesPolicerEntry 6 }
+
+genEquipProfilesPolicerEbs OBJECT-TYPE
+ SYNTAX INTEGER (0..128)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Ingress Policer Excess Burst Size (EBS)."
+::= { genEquipProfilesPolicerEntry 7 }
+
+genEquipProfilesPolicerColorMode OBJECT-TYPE
+ SYNTAX PolicerColorMode
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Ingress Policer Color Mode (Color Aware or Color Blind)."
+::= { genEquipProfilesPolicerEntry 8 }
+
+genEquipProfilesPolicerCouplingFlagMode OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Ingress Policer Coupling Flag between Green and Yellow leaky buckets."
+::= { genEquipProfilesPolicerEntry 9 }
+
+genEquipProfilesPolicerDataPlaneId OBJECT-TYPE
+ SYNTAX INTEGER (0..4096)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The real policer ID in the dataplan 0 to 10000."
+::= { genEquipProfilesPolicerEntry 10 }
+
+genEquipProfilesPolicerRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Table Mib Row Status."
+::= { genEquipProfilesPolicerEntry 30 }
+
+--
+-- Switch Application sw-ap-profile-egress-l4-wred-green-max-drop
+--
+
+genEquipProfilesL4WredTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipProfilesL4WredEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Green Curve Maximal Drop Ratio (in percentage)."
+ ::= { genEquipTmProfiles 2 }
+
+genEquipProfilesL4WredEntry OBJECT-TYPE
+ SYNTAX GenEquipProfilesL4WredEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Green Curve Maximal Drop Ratio (in percentage) entry."
+ INDEX { genEquipProfilesL4WredIndex }
+ ::= { genEquipProfilesL4WredTable 1 }
+
+GenEquipProfilesL4WredEntry ::=
+ SEQUENCE {
+ genEquipProfilesL4WredIndex
+ INTEGER,
+ genEquipProfilesL4WredGreenMinThreshold
+ INTEGER,
+ genEquipProfilesL4WredGreenMaxThreshold
+ INTEGER,
+ genEquipProfilesL4WredGreenMaxDrop
+ INTEGER,
+ genEquipProfilesL4WredYellowMinThreshold
+ INTEGER,
+ genEquipProfilesL4WredYellowMaxThreshold
+ INTEGER,
+ genEquipProfilesL4WredYellowMaxDrop
+ INTEGER,
+ genEquipProfilesL4WredYellowRowStatus
+ RowStatus
+}
+
+
+genEquipProfilesL4WredIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..32)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "WRED Curves Profile ID."
+::= { genEquipProfilesL4WredEntry 1 }
+
+genEquipProfilesL4WredGreenMinThreshold OBJECT-TYPE
+ SYNTAX INTEGER (0..8192)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Green Curve Minimal occupancy (No drop until this level)."
+::= { genEquipProfilesL4WredEntry 2 }
+
+genEquipProfilesL4WredGreenMaxThreshold OBJECT-TYPE
+ SYNTAX INTEGER (0..8192)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Green Curve Maximal occupancy (from this point 100% will be dropped)."
+::= { genEquipProfilesL4WredEntry 3 }
+
+genEquipProfilesL4WredGreenMaxDrop OBJECT-TYPE
+ SYNTAX INTEGER (1..100)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Green Curve Maximal Drop Ratio (in percentage)."
+::= { genEquipProfilesL4WredEntry 4 }
+
+genEquipProfilesL4WredYellowMinThreshold OBJECT-TYPE
+ SYNTAX INTEGER (0..8192)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Yellow Curve Minimal occupancy (No drop until this level)."
+::= { genEquipProfilesL4WredEntry 5 }
+
+genEquipProfilesL4WredYellowMaxThreshold OBJECT-TYPE
+ SYNTAX INTEGER (0..8192)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Yellow Curve Maximal occupancy (from this point 100% will be dropped)."
+::= { genEquipProfilesL4WredEntry 6 }
+
+genEquipProfilesL4WredYellowMaxDrop OBJECT-TYPE
+ SYNTAX INTEGER (0..8192)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Yellow Curve Maximal Drop Ratio (in percentage)."
+::= { genEquipProfilesL4WredEntry 7 }
+
+genEquipProfilesL4WredYellowRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Table Mib Row Status."
+::= { genEquipProfilesL4WredEntry 30 }
+
+--
+-- Switch Application sw-ap-global-egress-scheduler-cos-priority-profiles-list-table
+--
+
+genEquipProfilesSchedulerCoSPriTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipProfilesSchedulerCoSPriEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "The table holds the Egress Scheduler Port priority profile (each profile contain 8 priorities per 8 queues of single port)."
+ ::= { genEquipTmProfiles 3 }
+
+genEquipProfilesSchedulerCoSPriEntry OBJECT-TYPE
+ SYNTAX GenEquipProfilesSchedulerCoSPriEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "The table entry holds the Egress Scheduler Port priority profile (each profile contain 8 priorities per 8 queues of single port)."
+ INDEX { genEquipProfilesSchedulerCoSPriIndex }
+ ::= { genEquipProfilesSchedulerCoSPriTable 1 }
+
+GenEquipProfilesSchedulerCoSPriEntry ::=
+ SEQUENCE {
+ genEquipProfilesSchedulerCoSPriIndex
+ INTEGER,
+ genEquipProfilesSchedulerCoSPriCos0Description
+ DisplayString,
+ genEquipProfilesSchedulerCoSPriGreenCos0Priority
+ INTEGER,
+ genEquipProfilesSchedulerCoSPriCos1description
+ DisplayString,
+ genEquipProfilesSchedulerCoSPriGreenCos1Priority
+ INTEGER,
+ genEquipProfilesSchedulerCoSPriCos2Description
+ DisplayString,
+ genEquipProfilesSchedulerCoSPriGreenCos2Priority
+ INTEGER,
+ genEquipProfilesSchedulerCoSPriCos3description
+ DisplayString,
+ genEquipProfilesSchedulerCoSPriGreenCos3Priority
+ INTEGER,
+ genEquipProfilesSchedulerCoSPriCos4description
+ DisplayString,
+ genEquipProfilesSchedulerCoSPriGreenCos4Priority
+ INTEGER,
+ genEquipProfilesSchedulerCoSPriCos5description
+ DisplayString,
+ genEquipProfilesSchedulerCoSPriGreenCos5Priority
+ INTEGER,
+ genEquipProfilesSchedulerCoSPriCos6description
+ DisplayString,
+ genEquipProfilesSchedulerCoSPriGreenCos6Priority
+ INTEGER,
+ genEquipProfilesSchedulerCoSPriCos7description
+ DisplayString,
+ genEquipProfilesSchedulerCoSPriGreenCos7Priority
+ INTEGER,
+ genEquipProfilesSchedulerCoSPriRowStatus
+ RowStatus
+}
+
+
+genEquipProfilesSchedulerCoSPriIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..32)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Profile ID."
+::= { genEquipProfilesSchedulerCoSPriEntry 1 }
+
+genEquipProfilesSchedulerCoSPriCos0Description OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..21))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "CoS 0 Description."
+::= { genEquipProfilesSchedulerCoSPriEntry 2 }
+
+genEquipProfilesSchedulerCoSPriGreenCos0Priority OBJECT-TYPE
+ SYNTAX INTEGER (1..4)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Green CoS 0 priority."
+::= { genEquipProfilesSchedulerCoSPriEntry 3 }
+
+genEquipProfilesSchedulerCoSPriCos1description OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..21))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "CoS 1 Description."
+::= { genEquipProfilesSchedulerCoSPriEntry 4 }
+
+genEquipProfilesSchedulerCoSPriGreenCos1Priority OBJECT-TYPE
+ SYNTAX INTEGER (1..4)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Green CoS 1 priority."
+::= { genEquipProfilesSchedulerCoSPriEntry 5 }
+
+genEquipProfilesSchedulerCoSPriCos2Description OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..21))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "CoS 2 Description."
+::= { genEquipProfilesSchedulerCoSPriEntry 6 }
+
+genEquipProfilesSchedulerCoSPriGreenCos2Priority OBJECT-TYPE
+ SYNTAX INTEGER (1..4)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Green CoS 2 priority."
+::= { genEquipProfilesSchedulerCoSPriEntry 7 }
+
+genEquipProfilesSchedulerCoSPriCos3description OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..21))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "CoS 3 Description."
+::= { genEquipProfilesSchedulerCoSPriEntry 8 }
+
+genEquipProfilesSchedulerCoSPriGreenCos3Priority OBJECT-TYPE
+ SYNTAX INTEGER (1..4)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Green CoS 3 priority."
+::= { genEquipProfilesSchedulerCoSPriEntry 9 }
+
+genEquipProfilesSchedulerCoSPriCos4description OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..21))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "CoS 4 Description."
+::= { genEquipProfilesSchedulerCoSPriEntry 10 }
+
+genEquipProfilesSchedulerCoSPriGreenCos4Priority OBJECT-TYPE
+ SYNTAX INTEGER (1..4)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Green CoS 4 priority."
+::= { genEquipProfilesSchedulerCoSPriEntry 11 }
+
+genEquipProfilesSchedulerCoSPriCos5description OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..21))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "CoS 5 Description."
+::= { genEquipProfilesSchedulerCoSPriEntry 12 }
+
+genEquipProfilesSchedulerCoSPriGreenCos5Priority OBJECT-TYPE
+ SYNTAX INTEGER (1..4)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Green CoS 5 priority."
+::= { genEquipProfilesSchedulerCoSPriEntry 13 }
+
+genEquipProfilesSchedulerCoSPriCos6description OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..21))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "CoS 6 Description."
+::= { genEquipProfilesSchedulerCoSPriEntry 14 }
+
+genEquipProfilesSchedulerCoSPriGreenCos6Priority OBJECT-TYPE
+ SYNTAX INTEGER (1..4)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Green CoS 6 priority."
+::= { genEquipProfilesSchedulerCoSPriEntry 15 }
+
+genEquipProfilesSchedulerCoSPriCos7description OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..21))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "CoS 7 Description."
+::= { genEquipProfilesSchedulerCoSPriEntry 16 }
+
+genEquipProfilesSchedulerCoSPriGreenCos7Priority OBJECT-TYPE
+ SYNTAX INTEGER (1..42)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Green CoS 7 priority."
+::= { genEquipProfilesSchedulerCoSPriEntry 17 }
+
+genEquipProfilesSchedulerCoSPriRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Table Mib Row Status."
+::= { genEquipProfilesSchedulerCoSPriEntry 30 }
+
+--
+-- Switch Application sw-ap-global-egress-scheduler-wfq-profiles-list-table
+--
+
+genEquipProfilesSchedulerWfqTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipProfilesSchedulerWfqEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "The table holds the Egress Scheduler Port WFQ profiles (each profile contain 8 weights per 8 queues of single port)."
+ ::= { genEquipTmProfiles 4 }
+
+genEquipProfilesSchedulerWfqEntry OBJECT-TYPE
+ SYNTAX GenEquipProfilesSchedulerWfqEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "The table entry holds the Egress Scheduler Port WFQ profiles (each profile contain 8 weights per 8 queues of single port)."
+ INDEX { genEquipProfilesSchedulerWfqIndex }
+ ::= { genEquipProfilesSchedulerWfqTable 1 }
+
+GenEquipProfilesSchedulerWfqEntry ::=
+ SEQUENCE {
+ genEquipProfilesSchedulerWfqIndex
+ INTEGER,
+ genEquipProfilesSchedulerWfqCos0Weight
+ INTEGER,
+ genEquipProfilesSchedulerWfqCos1Weight
+ INTEGER,
+ genEquipProfilesSchedulerWfqCos2Weight
+ INTEGER,
+ genEquipProfilesSchedulerWfqCos3Weight
+ INTEGER,
+ genEquipProfilesSchedulerWfqCos4Weight
+ INTEGER,
+ genEquipProfilesSchedulerWfqCos5Weight
+ INTEGER,
+ genEquipProfilesSchedulerWfqCos6Weight
+ INTEGER,
+ genEquipProfilesSchedulerWfqCos7Weight
+ INTEGER,
+ genEquipProfilesSchedulerWfqRowStatus
+ RowStatus
+}
+
+
+genEquipProfilesSchedulerWfqIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..7)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "WFQ Profile ID."
+::= { genEquipProfilesSchedulerWfqEntry 1 }
+
+genEquipProfilesSchedulerWfqCos0Weight OBJECT-TYPE
+ SYNTAX INTEGER (1..256)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "CoS 0 Weight."
+::= { genEquipProfilesSchedulerWfqEntry 2 }
+
+genEquipProfilesSchedulerWfqCos1Weight OBJECT-TYPE
+ SYNTAX INTEGER (1..256)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "CoS 1 Weight."
+::= { genEquipProfilesSchedulerWfqEntry 3 }
+
+genEquipProfilesSchedulerWfqCos2Weight OBJECT-TYPE
+ SYNTAX INTEGER (1..256)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "CoS 2 Weight."
+::= { genEquipProfilesSchedulerWfqEntry 4 }
+
+genEquipProfilesSchedulerWfqCos3Weight OBJECT-TYPE
+ SYNTAX INTEGER (1..256)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "CoS 3 Weight."
+::= { genEquipProfilesSchedulerWfqEntry 5 }
+
+genEquipProfilesSchedulerWfqCos4Weight OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "CoS 4 Weight."
+::= { genEquipProfilesSchedulerWfqEntry 6 }
+
+genEquipProfilesSchedulerWfqCos5Weight OBJECT-TYPE
+ SYNTAX INTEGER (1..256)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Green CoS 2 priority."
+::= { genEquipProfilesSchedulerWfqEntry 7 }
+
+genEquipProfilesSchedulerWfqCos6Weight OBJECT-TYPE
+ SYNTAX INTEGER (1..256)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "CoS 3 Description."
+::= { genEquipProfilesSchedulerWfqEntry 8 }
+
+genEquipProfilesSchedulerWfqCos7Weight OBJECT-TYPE
+ SYNTAX INTEGER (1..256)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "CoS 7 Weight."
+::= { genEquipProfilesSchedulerWfqEntry 9 }
+
+genEquipProfilesSchedulerWfqRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Table Mib Row Status."
+::= { genEquipProfilesSchedulerWfqEntry 30 }
+
+--
+-- Switch Application sw-ap-l2-if-logical-profile-egress-shaper-table
+--
+
+genEquipProfilesL2ShaperTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipProfilesL2ShaperEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "The table holds the Egress Shaper profiles at port level."
+ ::= { genEquipTmProfiles 5 }
+
+genEquipProfilesL2ShaperEntry OBJECT-TYPE
+ SYNTAX GenEquipProfilesL2ShaperEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "The table entry holds the Egress Shaper profiles at port level."
+ INDEX { genEquipProfilesL2ShaperIndex }
+ ::= { genEquipProfilesL2ShaperTable 1 }
+
+GenEquipProfilesL2ShaperEntry ::=
+ SEQUENCE {
+ genEquipProfilesL2ShaperIndex
+ INTEGER,
+ genEquipProfilesL2ShaperDescription
+ DisplayString,
+ genEquipProfilesL2ShaperCir
+ INTEGER,
+ genEquipProfilesL2ShaperCbs
+ INTEGER,
+ genEquipProfilesL2ShaperBurstType
+ BurstType,
+ genEquipProfilesL2ShaperRowStatus
+ RowStatus
+}
+
+
+genEquipProfilesL2ShaperIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..32)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Shaper Profile ID."
+::= { genEquipProfilesL2ShaperEntry 1 }
+
+genEquipProfilesL2ShaperDescription OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..21))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Shaper Description."
+::= { genEquipProfilesL2ShaperEntry 2 }
+
+genEquipProfilesL2ShaperCir OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Committed Information Rate (in Bits)."
+::= { genEquipProfilesL2ShaperEntry 3 }
+
+genEquipProfilesL2ShaperCbs OBJECT-TYPE
+ SYNTAX INTEGER (1..2048)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Committed Burst Size (in Bytes)."
+::= { genEquipProfilesL2ShaperEntry 4 }
+
+genEquipProfilesL2ShaperBurstType OBJECT-TYPE
+ SYNTAX BurstType
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "CBS burst type - short (minimal) size or long burst (recomanded for long RTT)."
+::= { genEquipProfilesL2ShaperEntry 5 }
+
+
+genEquipProfilesL2ShaperRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Table Mib Row Status."
+::= { genEquipProfilesL2ShaperEntry 30 }
+
+--
+-- Switch Application sw-ap-l3-srv-profile-egress-shaper-table
+--
+
+genEquipProfilesL3ServiceShaperTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipProfilesL3ServiceShaperEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "The table holds the Egress Shaper profiles at service level."
+ ::= { genEquipTmProfiles 6 }
+
+genEquipProfilesL3ServiceShaperEntry OBJECT-TYPE
+ SYNTAX GenEquipProfilesL3ServiceShaperEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "The table entry holds the Egress Shaper profiles at service level."
+ INDEX { genEquipProfilesL3ServiceShaperIndex }
+ ::= { genEquipProfilesL3ServiceShaperTable 1 }
+
+GenEquipProfilesL3ServiceShaperEntry ::=
+ SEQUENCE {
+ genEquipProfilesL3ServiceShaperIndex
+ INTEGER,
+ genEquipProfilesL3ServiceShaperDescription
+ DisplayString,
+ genEquipProfilesL3ServiceShaperCir
+ INTEGER,
+ genEquipProfilesL3ServiceShaperCbs
+ INTEGER,
+ genEquipProfilesL3ServiceShaperPir
+ INTEGER,
+ genEquipProfilesL3ServiceShaperPbs
+ INTEGER,
+ genEquipProfilesL3ServiceShaperBurstType
+ BurstType,
+ genEquipProfilesL3ServiceShaperRowStatus
+ RowStatus
+}
+
+
+genEquipProfilesL3ServiceShaperIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..256)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Shaper Profile ID."
+::= { genEquipProfilesL3ServiceShaperEntry 1 }
+
+genEquipProfilesL3ServiceShaperDescription OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..21))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Shaper Description."
+::= { genEquipProfilesL3ServiceShaperEntry 2 }
+
+genEquipProfilesL3ServiceShaperCir OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Committed Information Rate (in Bits)."
+::= { genEquipProfilesL3ServiceShaperEntry 3 }
+
+genEquipProfilesL3ServiceShaperCbs OBJECT-TYPE
+ SYNTAX INTEGER (1..1016)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Committed Burst Size (in Bytes)."
+::= { genEquipProfilesL3ServiceShaperEntry 4 }
+
+genEquipProfilesL3ServiceShaperPir OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Peak Information Rate (in Bits)."
+::= { genEquipProfilesL3ServiceShaperEntry 5 }
+
+genEquipProfilesL3ServiceShaperPbs OBJECT-TYPE
+ SYNTAX INTEGER (1..1016)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Peak Burst size (in Bytes)."
+::= { genEquipProfilesL3ServiceShaperEntry 6 }
+
+genEquipProfilesL3ServiceShaperBurstType OBJECT-TYPE
+ SYNTAX BurstType
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "CBS and PBS burst type - short (minimal) size or long burst (recomanded for long RTT)."
+::= { genEquipProfilesL3ServiceShaperEntry 7 }
+
+genEquipProfilesL3ServiceShaperRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Table Mib Row Status."
+::= { genEquipProfilesL3ServiceShaperEntry 30 }
+
+--
+-- Switch Application sw-ap-l4-srv-sp-profile-egress-queue-shaper-table
+--
+
+genEquipProfilesEgressL4QueueShaperTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipProfilesEgressL4QueueShaperEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "The table holds the Egress Shaper profiles at Queue level."
+ ::= { genEquipTmProfiles 7 }
+
+genEquipProfilesEgressL4QueueShaperEntry OBJECT-TYPE
+ SYNTAX GenEquipProfilesEgressL4QueueShaperEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "The table entry holds the Egress Shaper profiles at Queue level."
+ INDEX { genEquipProfilesEgressL4QueueShaperIndex }
+ ::= { genEquipProfilesEgressL4QueueShaperTable 1 }
+
+GenEquipProfilesEgressL4QueueShaperEntry ::=
+ SEQUENCE {
+ genEquipProfilesEgressL4QueueShaperIndex
+ INTEGER,
+ genEquipProfilesEgressL4QueueShaperDescription
+ DisplayString,
+ genEquipProfilesEgressL4QueueShaperCir
+ INTEGER,
+ genEquipProfilesEgressL4QueueShaperCbs
+ INTEGER,
+ genEquipProfilesEgressL4QueueShaperBurstType
+ BurstType,
+ genEquipProfilesEgressL4QueueShaperRowStatus
+ RowStatus
+}
+
+
+genEquipProfilesEgressL4QueueShaperIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..32)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Shaper Profile ID."
+::= { genEquipProfilesEgressL4QueueShaperEntry 1 }
+
+genEquipProfilesEgressL4QueueShaperDescription OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..21))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Shaper Description."
+::= { genEquipProfilesEgressL4QueueShaperEntry 2 }
+
+genEquipProfilesEgressL4QueueShaperCir OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Committed Information Rate (in Bits)."
+::= { genEquipProfilesEgressL4QueueShaperEntry 3 }
+
+genEquipProfilesEgressL4QueueShaperCbs OBJECT-TYPE
+ SYNTAX INTEGER (1..1016)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Committed Burst Size (in Bytes)."
+::= { genEquipProfilesEgressL4QueueShaperEntry 4 }
+
+genEquipProfilesEgressL4QueueShaperBurstType OBJECT-TYPE
+ SYNTAX BurstType
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "CBS burst type - short (minimal) size or long burst (recomanded for long RTT)."
+::= { genEquipProfilesEgressL4QueueShaperEntry 5 }
+
+genEquipProfilesEgressL4QueueShaperRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Table Mib Row Status."
+::= { genEquipProfilesEgressL4QueueShaperEntry 30 }
+
+
+-- TM Config
+genEquipTmConfig OBJECT IDENTIFIER ::= {genEquipServicesTM 3}
+
+--
+-- Switch Application sw-ap-l4-srv-sp-egress-wred-profile-association-queue-table
+--
+
+genEquipTmL4WredAssociationTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipTmL4WredAssociationEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "The table holds the user selelcted WRED profile for eac Egress Queue."
+ ::= { genEquipTmConfig 1 }
+
+genEquipTmL4WredAssociationEntry OBJECT-TYPE
+ SYNTAX GenEquipTmL4WredAssociationEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "The table entry holds the user selelcted WRED profile for eac Egress Queue."
+ INDEX { genEquipTmL4WredAssociationIfIndex,
+ genEquipTmL4WredAssociationServiceIndex,
+ genEquipTmL4WredAssociationCosQueueIndex }
+ ::= { genEquipTmL4WredAssociationTable 1 }
+
+GenEquipTmL4WredAssociationEntry ::=
+ SEQUENCE {
+ genEquipTmL4WredAssociationIfIndex
+ INTEGER,
+ genEquipTmL4WredAssociationServiceIndex
+ INTEGER,
+ genEquipTmL4WredAssociationCosQueueIndex
+ INTEGER,
+ genEquipTmL4WredAssociationWredProfileId
+ INTEGER
+}
+
+
+genEquipTmL4WredAssociationIfIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Ethernet Logical port if-index table key."
+::= { genEquipTmL4WredAssociationEntry 1 }
+
+genEquipTmL4WredAssociationServiceIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..63)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Service Bundle ID."
+::= { genEquipTmL4WredAssociationEntry 2 }
+
+genEquipTmL4WredAssociationCosQueueIndex OBJECT-TYPE
+ SYNTAX INTEGER (0..7)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "CoS Queue ID."
+::= { genEquipTmL4WredAssociationEntry 3 }
+
+genEquipTmL4WredAssociationWredProfileId OBJECT-TYPE
+ SYNTAX INTEGER (1..32)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "WRED Profile ID."
+::= { genEquipTmL4WredAssociationEntry 4 }
+
+--
+-- Switch Application sw-ap-l2-if-logical-egress-scheduler-cos-priority-profile-association-to-if-table
+--
+
+genEquipTmSchedulerCoSPriAssociationTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipTmSchedulerCoSPriAssociationEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "The table holds the user selected Scheduler Priority Profile for each Egress port."
+ ::= { genEquipTmConfig 2 }
+
+genEquipTmSchedulerCoSPriAssociationEntry OBJECT-TYPE
+ SYNTAX GenEquipTmSchedulerCoSPriAssociationEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "The table entry holds the user selected Scheduler Priority Profile for each Egress port."
+ INDEX { genEquipTmSchedulerCoSPriAssociationIfIndex }
+ ::= { genEquipTmSchedulerCoSPriAssociationTable 1 }
+
+GenEquipTmSchedulerCoSPriAssociationEntry ::=
+ SEQUENCE {
+ genEquipTmSchedulerCoSPriAssociationIfIndex
+ INTEGER,
+ genEquipTmSchedulerCoSPriAssociationAssociatedProfileId
+ INTEGER
+}
+
+
+genEquipTmSchedulerCoSPriAssociationIfIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Ethernet Logical port if-index table key."
+::= { genEquipTmSchedulerCoSPriAssociationEntry 1 }
+
+genEquipTmSchedulerCoSPriAssociationAssociatedProfileId OBJECT-TYPE
+ SYNTAX INTEGER (1..9)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Queue Scheduler Profile ID."
+::= { genEquipTmSchedulerCoSPriAssociationEntry 2 }
+
+--
+-- Switch Application sw-ap-l3-srv-egress-shaper-profile-association-to-service-bundle-table
+--
+
+genEquipTmL3ServiceShaperAssociationTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipTmL3ServiceShaperAssociationEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "The table holds the user selected Shapping profiles for each Service Bundle."
+ ::= { genEquipTmConfig 3 }
+
+genEquipTmL3ServiceShaperAssociationEntry OBJECT-TYPE
+ SYNTAX GenEquipTmL3ServiceShaperAssociationEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "The table entry holds the user selected Shapping profiles for each Service Bundle."
+ INDEX { genEquipTmL3ServiceShaperAssociationIfIndex,
+ genEquipTmL3ServiceShaperAssociationServiceClassIndex }
+ ::= { genEquipTmL3ServiceShaperAssociationTable 1 }
+
+GenEquipTmL3ServiceShaperAssociationEntry ::=
+ SEQUENCE {
+ genEquipTmL3ServiceShaperAssociationIfIndex
+ INTEGER,
+ genEquipTmL3ServiceShaperAssociationServiceClassIndex
+ INTEGER,
+ genEquipTmL3ServiceShaperAssociationShaperProfileId
+ INTEGER,
+ genEquipTmL3ServiceShaperAssociationShaperAdmin
+ EnableDisable,
+ genEquipTmL3ServiceShaperAssociationRowStatus
+ RowStatus
+}
+
+
+genEquipTmL3ServiceShaperAssociationIfIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Ethernet Logical port if-index table key."
+::= { genEquipTmL3ServiceShaperAssociationEntry 1 }
+
+genEquipTmL3ServiceShaperAssociationServiceClassIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..63)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Service Bundle ID."
+::= { genEquipTmL3ServiceShaperAssociationEntry 2 }
+
+genEquipTmL3ServiceShaperAssociationShaperProfileId OBJECT-TYPE
+ SYNTAX INTEGER (1..256)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Shaper Profile ID."
+::= { genEquipTmL3ServiceShaperAssociationEntry 3 }
+
+genEquipTmL3ServiceShaperAssociationShaperAdmin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Shaper Admin."
+::= { genEquipTmL3ServiceShaperAssociationEntry 4 }
+
+genEquipTmL3ServiceShaperAssociationRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Table Mib Row Status."
+::= { genEquipTmL3ServiceShaperAssociationEntry 30 }
+
+--
+-- Switch Application sw-ap-l2-if-logical-egress-shaper-profile-association-to-if-table
+--
+
+genEquipTmL2ShaperAssociationTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipTmL2ShaperAssociationEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "The table holds the user selected Shapping profiles for each Ethernet Port."
+ ::= { genEquipTmConfig 4 }
+
+genEquipTmL2ShaperAssociationEntry OBJECT-TYPE
+ SYNTAX GenEquipTmL2ShaperAssociationEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "The table entry holds the user selected Shapping profiles for each Ethernet Port."
+ INDEX { genEquipTmL2ShaperAssociationIfIndex }
+ ::= { genEquipTmL2ShaperAssociationTable 1 }
+
+GenEquipTmL2ShaperAssociationEntry ::=
+ SEQUENCE {
+ genEquipTmL2ShaperAssociationIfIndex
+ INTEGER,
+ genEquipTmL2ShaperAssociationProfileId
+ INTEGER,
+ genEquipTmL2ShaperAssociationAdmin
+ EnableDisable,
+ genEquipTmL2ShaperAssociationRowStatus
+ RowStatus
+}
+
+
+genEquipTmL2ShaperAssociationIfIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Ethernet Logical port if-index table key."
+::= { genEquipTmL2ShaperAssociationEntry 1 }
+
+genEquipTmL2ShaperAssociationProfileId OBJECT-TYPE
+ SYNTAX INTEGER (1..32)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Port Shaper Profile ID."
+::= { genEquipTmL2ShaperAssociationEntry 2 }
+
+genEquipTmL2ShaperAssociationAdmin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Port Shaper Admin."
+::= { genEquipTmL2ShaperAssociationEntry 3 }
+
+genEquipTmL2ShaperAssociationRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Table Mib Row Status."
+::= { genEquipTmL2ShaperAssociationEntry 30 }
+
+--
+-- Switch Application sw-ap-l4-srv-sp-egress-queue-shaper-profile-association-to-queue-table
+--
+
+genEquipTmL4QueueShaperAssociationTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipTmL4QueueShaperAssociationEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "The table holds the user selected Shapping profiles for each Ethernet PortThe table holds the user selected Shapping profiles for each transmitting Queue."
+ ::= { genEquipTmConfig 5 }
+
+genEquipTmL4QueueShaperAssociationEntry OBJECT-TYPE
+ SYNTAX GenEquipTmL4QueueShaperAssociationEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "The table entry holds the user selected Shapping profiles for each transmitting Queue."
+ INDEX { genEquipTmL4QueueShaperAssociationIfIndex,
+ genEquipTmL4QueueShaperAssociationServiceIndex,
+ genEquipTmL4QueueShaperAssociationCosQueueIndex }
+ ::= { genEquipTmL4QueueShaperAssociationTable 1 }
+
+GenEquipTmL4QueueShaperAssociationEntry ::=
+ SEQUENCE {
+ genEquipTmL4QueueShaperAssociationIfIndex
+ INTEGER,
+ genEquipTmL4QueueShaperAssociationServiceIndex
+ INTEGER,
+ genEquipTmL4QueueShaperAssociationCosQueueIndex
+ INTEGER,
+ genEquipTmL4QueueShaperAssociationShaperProfileId
+ INTEGER,
+ genEquipTmL4QueueShaperAssociationShaperProfileAdmin
+ EnableDisable,
+ genEquipTmL4QueueShaperAssociationRowStatus
+ RowStatus
+}
+
+
+genEquipTmL4QueueShaperAssociationIfIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Ethernet Logical port if-index table key."
+::= { genEquipTmL4QueueShaperAssociationEntry 1 }
+
+genEquipTmL4QueueShaperAssociationServiceIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..63)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Service Bundle ID."
+::= { genEquipTmL4QueueShaperAssociationEntry 2 }
+
+genEquipTmL4QueueShaperAssociationCosQueueIndex OBJECT-TYPE
+ SYNTAX INTEGER (0..7)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "CoS Queue ID."
+::= { genEquipTmL4QueueShaperAssociationEntry 3 }
+
+genEquipTmL4QueueShaperAssociationShaperProfileId OBJECT-TYPE
+ SYNTAX INTEGER (1..32)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Queue Shaper Profile ID."
+::= { genEquipTmL4QueueShaperAssociationEntry 4 }
+
+genEquipTmL4QueueShaperAssociationShaperProfileAdmin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Queue Shaper Admin."
+::= { genEquipTmL4QueueShaperAssociationEntry 5 }
+
+genEquipTmL4QueueShaperAssociationRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Table Mib Row Status."
+::= { genEquipTmL4QueueShaperAssociationEntry 30 }
+
+--
+-- Switch Application sw-ap-l2-if-logical-egress-scheduler-cos-wfq-profile-association-to-if-table
+--
+
+genEquipTmSchedulerWfqAssociationTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipTmSchedulerWfqAssociationEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "The table holds the user selected Scheduler WFQ weights Profile for each Egress port."
+ ::= { genEquipTmConfig 6 }
+
+genEquipTmSchedulerWfqAssociationEntry OBJECT-TYPE
+ SYNTAX GenEquipTmSchedulerWfqAssociationEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "The table entry holds the user selected Scheduler WFQ weights Profile for each Egress port."
+ INDEX { genEquipTmSchedulerWfqAssociationIfIndex }
+ ::= { genEquipTmSchedulerWfqAssociationTable 1 }
+
+GenEquipTmSchedulerWfqAssociationEntry ::=
+ SEQUENCE {
+ genEquipTmSchedulerWfqAssociationIfIndex
+ INTEGER,
+ genEquipTmSchedulerWfqAssociationProfileId
+ INTEGER
+}
+
+
+genEquipTmSchedulerWfqAssociationIfIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Ethernet Logical port if-index table key."
+::= { genEquipTmSchedulerWfqAssociationEntry 1 }
+
+genEquipTmSchedulerWfqAssociationProfileId OBJECT-TYPE
+ SYNTAX INTEGER (1..7)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "WFQ Scheduler Profile ID"
+::= { genEquipTmSchedulerWfqAssociationEntry 2 }
+
+
+-- The following tables are accessed by its slot, there is no indirect access to this tables through main slot
+-- Radio Clock Source
+genEquipSynchronizationRadioClkSrcSource OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This parameters determines whether the system reference frequency is transported through the radio.
+ 0 indicates that the outgoing signal takes its clock from an independant local clock.
+ channel number indicates that the clock is from that radio-channel reference clock,
+ as taken from the synchronization source interface."
+::= { genEquipSynchronization 3 }
+
+genEquipSynchronizationSDHClkSrcSource OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This parameters determines whether the system reference frequency is transported
+ through the interface. if value is 0 it indicates that the outgoing signal takes its
+ clock from an independant local clock.
+ system-clock-source indicates that the clock is from the system reference clock,
+ as taken from the synchronization source interface."
+::= { genEquipSynchronization 4 }
+
+genEquipSynchronizationPDHClkSrcTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipSynchronizationPDHClkSrcEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Synchronization source table."
+ ::= { genEquipSynchronization 5 }
+
+genEquipSynchronizationPDHClkSrcEntry OBJECT-TYPE
+ SYNTAX GenEquipSynchronizationPDHClkSrcEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Synchronization source table."
+ INDEX { genEquipSynchronizationPDHClkSrcIFNum }
+ ::= { genEquipSynchronizationPDHClkSrcTable 1 }
+
+GenEquipSynchronizationPDHClkSrcEntry ::=
+ SEQUENCE {
+ genEquipSynchronizationPDHClkSrcIFNum
+ INTEGER,
+ genEquipSynchronizationPDHClkSrcSource
+ INTEGER
+}
+
+genEquipSynchronizationPDHClkSrcIFNum OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This parameters the interface which is configured to take the system reference clock
+ or a local clock in genEquipSynchronizationSDHClkSrcSource.
+ The number indicates the E1/DS1 interface being configured (1-32)."
+::= { genEquipSynchronizationPDHClkSrcEntry 2 }
+
+genEquipSynchronizationPDHClkSrcSource OBJECT-TYPE
+ SYNTAX INTEGER {
+ local-clock(0),
+ system-clock-source(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This parameters determines whether the system reference frequency is transported
+ through the interface defined in genEquipSynchronizationPDHClkSrcIFNum.
+ local-clock indicates that the outgoing signal takes its clock from an independant local clock.
+ system-clock-source indicates that the clock is from the system reference clock,
+ as taken from the synchronization source interface."
+::= { genEquipSynchronizationPDHClkSrcEntry 3 }
+
+genEquipSynchronizationPRCRegeneratorMode OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This parameter sets the IDU to point-to-point PRC quality frequency distribution mode.
+ Notice that this is relevant only for smart pipe applications"
+::= { genEquipSynchronization 6 }
+
+genEquipSynchronizationPRCRegeneratorDirection OBJECT-TYPE
+ SYNTAX INTEGER {
+ line-to-radio (0),
+ radio-to-line (1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This parameter sets the direction in which the frequency signal is transported,
+ in the case of electrical GBE interfaces.
+ Notice that for optical interfaces, this parameter has no effect."
+::= { genEquipSynchronization 7 }
+
+
+genEquipSynchronizationSrcRevertiveTimer OBJECT-TYPE
+ SYNTAX INTEGER (0..30)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "this parameter sets the timeout (in seconds) for a counter which is set once
+ an interface recovers from a failure; after this timeout the interface will be considered
+ stable and can be used as a synchronization source. A value of zero means no timer."
+::= { genEquipSynchronization 8 }
+
+genEquipSynchronizationSrcActiveSyncSourceIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The active synchronization source."
+::= { genEquipSynchronization 9 }
+
+genEquipSynchronizationNodeMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ automatic (0),
+ force (1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This parameter allows forcing a certain source as the active source for the system reference clock.
+ When forced, the active source is specified by genEquipSynchronizationForceSource.
+ In automatic mode, the active source is determined by quality and priority of the relevant interfaces
+ (as configured in table genEquipSynchronizationSrcTable)."
+::= { genEquipSynchronization 10 }
+
+genEquipSynchronizationForceSource OBJECT-TYPE
+ SYNTAX INTEGER (0..8)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This parameter determines which source number will be forced as active when genEquipSynchronizationNodeMode is set to force."
+::= { genEquipSynchronization 11 }
+
+genEquipSynchronizationSystemReferenceQuality OBJECT-TYPE
+ SYNTAX INTEGER {
+ automatic(0),
+ prs(1),
+ g811(2),
+ transit-node(3),
+ ssu-a(4),
+ unknown(5),
+ stratum2(7),
+ ssu-b(8),
+ stratum3(10),
+ g813-8262(11),
+ smc(12),
+ stratum3e(13),
+ do-not-use (15)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "This parameter shows the current quality of the system reference clock"
+::= { genEquipSynchronization 12 }
+
+genEquipSynchronizationRegeneratorSSMAdmin OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This parameter determines whether or not in pipe mode the system generates SSM messages"
+::= { genEquipSynchronization 13 }
+
+genEquipSynchronizationPWClkExport OBJECT-TYPE
+ SYNTAX INTEGER {
+ local-clock(0),
+ system-clock-source(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This parameter determines whether the system reference clock is exported toward the PWE3 T-Card;
+ This reference can be exported towards front panel using ExportClkFrontPannel or used as a common clock for
+ PWs using ClockSourceRef. Notice that either this or any single one of the PW T-card TDM interfaces can export the reference clock,
+ but not both at the same time."
+::= { genEquipSynchronization 14 }
+
+
+-- Synch Pipe Configurations - sync-pipe-config-table
+--
+genEquipSynchronizationPipeTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipSynchronizationPipeEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "The table shows pipe interfaces."
+ ::= { genEquipSynchronization 20 }
+
+genEquipSynchronizationPipeEntry OBJECT-TYPE
+ SYNTAX GenEquipSynchronizationPipeEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "The table entry shows pipe interfaces."
+ INDEX { genEquipSynchronizationPipeId }
+ ::= { genEquipSynchronizationPipeTable 1 }
+
+GenEquipSynchronizationPipeEntry ::=
+ SEQUENCE {
+ genEquipSynchronizationPipeId
+ INTEGER,
+ genEquipSynchronizationPipeInd1
+ INTEGER,
+ genEquipSynchronizationPipeInd2
+ INTEGER,
+ genEquipSynchronizationPipeStatus
+ INTEGER
+}
+
+genEquipSynchronizationPipeId OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Pipe ID."
+ ::= { genEquipSynchronizationPipeEntry 1 }
+
+
+genEquipSynchronizationPipeInd1 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Sync Interface 1."
+ ::= { genEquipSynchronizationPipeEntry 2 }
+
+genEquipSynchronizationPipeInd2 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Sync Interface 2."
+ ::= { genEquipSynchronizationPipeEntry 3 }
+
+genEquipSynchronizationPipeStatus OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Sync Pipe Status."
+ ::= { genEquipSynchronizationPipeEntry 4 }
+
+-- PTP (Precision Time Protocol)
+genEquipSynchronizationPTP OBJECT IDENTIFIER ::= {genEquipSynchronization 21}
+
+genEquipSynchronizationPTPTcAdmin OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Transparent Clock (TC) administrative state."
+ ::= { genEquipSynchronizationPTP 1 }
+
+
+-- TC configuartion - ptp-tc-config-table
+--
+genEquipSynchronizationPTPTcConfigTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipSynchronizationPTPTcConfigEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "PTP (Precision Time Protocol) TC (Transparent Clock) configuration table."
+ ::= { genEquipSynchronizationPTP 10 }
+
+genEquipSynchronizationPTPTcConfigEntry OBJECT-TYPE
+ SYNTAX GenEquipSynchronizationPTPTcConfigEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "PTP (Precision Time Protocol) TC (Transparent Clock) configuration table entry."
+ INDEX { genEquipSynchronizationPTPTcConfigId }
+ ::= { genEquipSynchronizationPTPTcConfigTable 1 }
+
+GenEquipSynchronizationPTPTcConfigEntry ::=
+ SEQUENCE {
+ genEquipSynchronizationPTPTcConfigId
+ INTEGER,
+ genEquipSynchronizationPTPTcConfigMaster
+ INTEGER
+}
+
+genEquipSynchronizationPTPTcConfigId OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The interface on which TC function is required."
+ ::= { genEquipSynchronizationPTPTcConfigEntry 1 }
+
+genEquipSynchronizationPTPTcConfigMaster OBJECT-TYPE
+ SYNTAX INTEGER {
+ upstream(0),
+ downstream(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Points whether the interface's direction is upstream or downstream."
+ ::= { genEquipSynchronizationPTPTcConfigEntry 2 }
+
+
+-- TC Status - ptp-tc-status-table
+--
+genEquipSynchronizationPTPTcStatusTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipSynchronizationPTPTcStatusEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "PTP (Precision Time Protocol) TC (Transparent Clock) status table."
+ ::= { genEquipSynchronizationPTP 11 }
+
+genEquipSynchronizationPTPTcStatusEntry OBJECT-TYPE
+ SYNTAX GenEquipSynchronizationPTPTcStatusEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "PTP (Precision Time Protocol) TC (Transparent Clock) status table entry."
+ INDEX { genEquipSynchronizationPTPTcStatusId }
+ ::= { genEquipSynchronizationPTPTcStatusTable 1 }
+
+GenEquipSynchronizationPTPTcStatusEntry ::=
+ SEQUENCE {
+ genEquipSynchronizationPTPTcStatusId
+ INTEGER,
+ genEquipSynchronizationPTPTcStatusState
+ INTEGER,
+ genEquipSynchronizationPTPTcStatusFreqLock
+ DownUp
+}
+
+genEquipSynchronizationPTPTcStatusId OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The interface on which TC status is required."
+ ::= { genEquipSynchronizationPTPTcStatusEntry 1 }
+
+
+genEquipSynchronizationPTPTcStatusState OBJECT-TYPE
+ SYNTAX INTEGER {
+ down(0),
+ init(1),
+ calibrating(2),
+ up(3)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The status of the TC function that may be: Down, Init, Calibrating or Up."
+ ::= { genEquipSynchronizationPTPTcStatusEntry 2 }
+
+genEquipSynchronizationPTPTcStatusFreqLock OBJECT-TYPE
+ SYNTAX DownUp
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The lock status, Up or Down, of the network synchronization frequency that passes through the interface."
+ ::= { genEquipSynchronizationPTPTcStatusEntry 3 }
+
+
+-- Interfaces
+genEquipInterfaces OBJECT IDENTIFIER ::= {genEquip 9}
+
+-- Interfaces - Ethernet
+genEquipInterfacesEther OBJECT IDENTIFIER ::= {genEquipInterfaces 1}
+
+genEquipInterfacesEtherTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipInterfacesEtherEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Ethernet interface configuration and status table.
+ The index of the table is via ifIndex, as well as the operational status and the admin state,
+ speed and port connector."
+ ::= { genEquipInterfacesEther 1 }
+
+genEquipInterfacesEtherEntry OBJECT-TYPE
+ SYNTAX GenEquipInterfacesEtherEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Ethernet interface configuration and status table.
+ The index of the table is via ifIndex, as well as the operational status and the admin state,
+ speed and port connector."
+ INDEX { ifIndex }
+ ::= { genEquipInterfacesEtherTable 1 }
+
+GenEquipInterfacesEtherEntry ::=
+ SEQUENCE {
+ genEquipInterfacesEtherConnType
+ INTEGER,
+ genEquipInterfacesEtherPortType
+ INTEGER,
+ genEquipInterfacesEtherAutoNegotiation
+ INTEGER,
+ genEquipInterfacesEtherDuplex
+ HalfFull,
+ genEquipInterfacesEtherRate
+ RateMbps,
+ genEquipInterfacesEtherPortLerningAdmin
+ EnableDisable,
+ genEquipInterfacesEtherFlowCtrl
+ INTEGER,
+ genEquipInterfacesEtherLagPortMember
+ INTEGER,
+ genEquipInterfacesEtherActualDuplex
+ HalfFull,
+ genEquipInterfacesEtherActualRate
+ RateMbps,
+ genEquipInterfacesEtherClkSrc
+ INTEGER,
+ genEquipInterfacesEtherPortServiceType
+ INTEGER,
+ genEquipInterfacesEtheMACAddress
+ MacAddress,
+ genEquipInterfacesEtherDefaultVLANId
+ INTEGER,
+ genEquipInterfacesEtherPortBlockSharedVlans
+ EnableDisable
+}
+
+genEquipInterfacesEtherConnType OBJECT-TYPE
+ SYNTAX INTEGER {
+ not-applicable(-1),
+ rj45(0),
+ electricalSFP(1),
+ opticalSFP(2),
+ radio(3),
+ sfp100base-fx(4)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The physical interface type. For port 8 the only valid value is radio. For ports 3 to 7 the only valid
+ value is rj45."
+ ::= { genEquipInterfacesEtherEntry 1 }
+
+
+genEquipInterfacesEtherPortType OBJECT-TYPE
+ SYNTAX INTEGER {
+ not-applicable(-1),
+ access(0),
+ trunk(1),
+ hybrid(2),
+ cN(3),
+ pN(4),
+ management(30),
+ wayside(31)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The type of the port.
+ Access - untagged port (in case of managed switch).
+ Trunk - C-VID tagged port (in case of managed switch).
+ CN - Don't care on the vlan tag (in case of metro switch configuration).
+ SN - S-VID is used as the first vlan (in case of metro switch configuration)."
+ ::= { genEquipInterfacesEtherEntry 2 }
+
+genEquipInterfacesEtherAutoNegotiation OBJECT-TYPE
+ SYNTAX INTEGER {
+ not-applicable(-1),
+ off(0),
+ on(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Enable or disable auto-negotiation on the port."
+ ::= { genEquipInterfacesEtherEntry 3 }
+
+genEquipInterfacesEtherDuplex OBJECT-TYPE
+ SYNTAX HalfFull
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Half or full duplex."
+ ::= { genEquipInterfacesEtherEntry 4 }
+
+genEquipInterfacesEtherRate OBJECT-TYPE
+ SYNTAX RateMbps
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "10, 100 OR 1000 Mbps."
+ ::= { genEquipInterfacesEtherEntry 5 }
+
+genEquipInterfacesEtherPortLerningAdmin OBJECT-TYPE
+ SYNTAX INTEGER {
+ not-applicable(-1),
+ enable(2),
+ disable(3)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Enable or disable MAC address learning in the port."
+ ::= { genEquipInterfacesEtherEntry 6 }
+
+genEquipInterfacesEtherFlowCtrl OBJECT-TYPE
+ SYNTAX INTEGER {
+ not-applicable(-1),
+ off(0),
+ on(1),
+ na(2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Enable or disable flow control on the port. Supported only in pipe mode. "
+ ::= { genEquipInterfacesEtherEntry 7 }
+
+genEquipInterfacesEtherLagPortMember OBJECT-TYPE
+ SYNTAX INTEGER {
+ not-applicable(-1),
+ not-aggrigated(0),
+ group-1(1),
+ group-2(2),
+ group-3(3)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The syntax is ifIndex, or FFFF for port that is not member in a lag."
+ ::= { genEquipInterfacesEtherEntry 8 }
+
+genEquipInterfacesEtherActualDuplex OBJECT-TYPE
+ SYNTAX HalfFull
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Actual duplex (in auto-negotiation, the mode the two ports agreed upon) - Half or full duplex."
+ ::= { genEquipInterfacesEtherEntry 9 }
+
+genEquipInterfacesEtherActualRate OBJECT-TYPE
+ SYNTAX RateMbps
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Actual rate (in auto-negotiation, the rate the two ports agreed upon) - 10, 100 OR 1000 Mbps."
+ ::= { genEquipInterfacesEtherEntry 10 }
+
+genEquipInterfacesEtherClkSrc OBJECT-TYPE
+ SYNTAX INTEGER {
+ not-applicable(-1),
+ local-clock(0),
+ system-clock-source(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The source for the outgoing carrier signal clock. Local-clock is an internal independent oscilator.
+ system-clock-source causes the ethernet clock to be derived from the defined system clock source
+ (which can be taken from another interface)
+ Note: changing this parameter per port affect all the Ethernet ports."
+ ::= { genEquipInterfacesEtherEntry 11 }
+
+genEquipInterfacesEtherPortServiceType OBJECT-TYPE
+ SYNTAX INTEGER {
+ not-applicable(-1),
+ sap(0),
+ snp(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This parameter indicates whether the port is being used as a Service Access Point (SAP)
+ or as a Service Network Point (SNP) in a network-wide Ethernet service;
+ the parameter has no functionality, but is meant to hold data for the NMS."
+ ::= { genEquipInterfacesEtherEntry 12 }
+
+genEquipInterfacesEtheMACAddress
+OBJECT-TYPE
+ SYNTAX MacAddress
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The MAC address of the port for CFM or PWE3 addressing purposes."
+ ::= { genEquipInterfacesEtherEntry 13 }
+
+genEquipInterfacesEtherDefaultVLANId
+OBJECT-TYPE
+ SYNTAX INTEGER (1..4090)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Default VLAN ID of the Ethernet interface."
+ ::= { genEquipInterfacesEtherEntry 14 }
+
+genEquipInterfacesEtherPortBlockSharedVlans
+OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "When enabled, this parameter blocks transfer of Ethernet frames to/from other ports
+ for which it is enabled, effectively eliminating all shared VLANs."
+ ::= { genEquipInterfacesEtherEntry 15 }
+
+
+---------------
+genEquipInterfacesEtherStatePropagation OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0) ,
+ lof-loc(1) ,
+ lof-loc-excber(3) ,
+ lof-loc-remote(5) ,
+ lof-loc-excber-remote(7) ,
+ lof(9) ,
+ lof-excber(11) ,
+ lof-remote(13) ,
+ lof-excber-remote(15)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This parameter configures the behavior of Ethernet ports in single
+ pipe mode. When a failure is detected, ports will be automatically shut
+ down when the configured conditions take place. The possible choices
+ are a combination of the following failures in the local and the remote IDUs:
+ radio LOF, Ethernet line LOC, radio excessive ber"
+ ::= { genEquipInterfacesEther 2 }
+
+genEquipInterfacesEtherPWPort OBJECT-TYPE
+ SYNTAX INTEGER (0..7)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The port in the traffic bridge connected to the PWE3 T-card."
+ ::= { genEquipInterfacesEther 3 }
+
+
+-- Interfaces E1/T1
+genEquipInterfacesE1T1 OBJECT IDENTIFIER ::= {genEquipInterfaces 2}
+
+genEquipInterfacesE1T1PortGroupTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipInterfacesE1T1PortGroupEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "General parameters for group of E1 or T1 interfaces."
+ ::= { genEquipInterfacesE1T1 1 }
+
+genEquipInterfacesE1T1PortGroupEntry OBJECT-TYPE
+ SYNTAX GenEquipInterfacesE1T1PortGroupEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "General parameters for group of E1 or T1 interfaces."
+ INDEX { genEquipInterfacesE1T1PortGroupId }
+ ::= { genEquipInterfacesE1T1PortGroupTable 1 }
+
+GenEquipInterfacesE1T1PortGroupEntry ::=
+ SEQUENCE {
+ genEquipInterfacesE1T1PortGroupId
+ INTEGER,
+ genEquipInterfacesE1T1PortGroupLineCode
+ INTEGER,
+ genEquipInterfacesE1T1PortGroupExcessiveBERthreshold
+ BerLevel,
+ genEquipInterfacesE1T1PortGroupSignalDegradeThreshold
+ INTEGER,
+ genEquipInterfacesE1T1PortGroupLineCode1to8
+ INTEGER,
+ genEquipInterfacesE1T1PortGroupLineCode9to16
+ INTEGER,
+ genEquipInterfacesE1T1PortGroupLineCode17to24
+ INTEGER,
+ genEquipInterfacesE1T1PortGroupLineCode25to32
+ INTEGER
+}
+
+genEquipInterfacesE1T1PortGroupId OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Group id. the index of this table."
+ ::= { genEquipInterfacesE1T1PortGroupEntry 1 }
+
+genEquipInterfacesE1T1PortGroupLineCode OBJECT-TYPE
+ SYNTAX INTEGER {
+ b8zs(1),
+ ami(2),
+ hdb3(3)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The PDH line coding. b8zs is for T1 and hdb3 for E1.
+ ami is only for T1. This parameter is
+ relevant only for versions up to 6.6.0.0.1.53 (including)."
+ ::= { genEquipInterfacesE1T1PortGroupEntry 2 }
+
+genEquipInterfacesE1T1PortGroupExcessiveBERthreshold OBJECT-TYPE
+ SYNTAX BerLevel
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Excessive BER threshold for the group of E1s/T1s."
+ ::= { genEquipInterfacesE1T1PortGroupEntry 3 }
+
+genEquipInterfacesE1T1PortGroupSignalDegradeThreshold OBJECT-TYPE
+ SYNTAX INTEGER { n1e-6(3), n1e-7(4), n1e-8(5), n1e-9(6) }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Signal degrade threshold for the group of E1s/T1s."
+ ::= { genEquipInterfacesE1T1PortGroupEntry 4 }
+
+genEquipInterfacesE1T1PortGroupLineCode1to8 OBJECT-TYPE
+ SYNTAX INTEGER {
+ b8zs(1),
+ ami(2),
+ hdb3(3)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The PDH line coding for line interfaces 1 to 8.
+ b8zs is for T1 and hdb3 for E1. ami is only for T1."
+ ::= { genEquipInterfacesE1T1PortGroupEntry 5 }
+
+genEquipInterfacesE1T1PortGroupLineCode9to16 OBJECT-TYPE
+ SYNTAX INTEGER {
+ b8zs(1),
+ ami(2),
+ hdb3(3)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The PDH line coding for line interfaces 9 to 16.
+ b8zs is for T1 and hdb3 for E1. ami is only for T1."
+ ::= { genEquipInterfacesE1T1PortGroupEntry 6 }
+
+genEquipInterfacesE1T1PortGroupLineCode17to24 OBJECT-TYPE
+ SYNTAX INTEGER {
+ b8zs(1),
+ ami(2),
+ hdb3(3)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The PDH line coding for line interfaces 17 to 24.
+ b8zs is for T1 and hdb3 for E1. ami is only for T1."
+ ::= { genEquipInterfacesE1T1PortGroupEntry 7 }
+
+genEquipInterfacesE1T1PortGroupLineCode25to32 OBJECT-TYPE
+ SYNTAX INTEGER {
+ b8zs(1),
+ ami(2),
+ hdb3(3)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The PDH line coding for interfaces 25 to 32.
+ b8zs is for T1 and hdb3 for E1. ami is only for T1."
+ ::= { genEquipInterfacesE1T1PortGroupEntry 8 }
+
+
+
+genEquipInterfacesE1T1Table OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipInterfacesE1T1Entry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "E1/T1 interface configuration table."
+ ::= { genEquipInterfacesE1T1 2 }
+
+genEquipInterfacesE1T1Entry OBJECT-TYPE
+ SYNTAX GenEquipInterfacesE1T1Entry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "E1/T1 interface configuration table."
+ INDEX { ifIndex }
+ ::= { genEquipInterfacesE1T1Table 1 }
+
+GenEquipInterfacesE1T1Entry ::=
+ SEQUENCE {
+ genEquipInterfacesE1T1Priority
+ INTEGER,
+ genEquipInterfacesE1T1CurrBER
+ BerLevel,
+ genEquipInterfacesE1T1Loopback
+ INTEGER,
+ genEquipInterfacesE1T1AISSStatus
+ INTEGER,
+ genEquipInterfacesE1T1CableLength
+ INTEGER
+}
+
+genEquipInterfacesE1T1Priority OBJECT-TYPE
+ SYNTAX INTEGER { low(1), high(2) }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The ACM priority of the E1/T1.
+ This parameter is relevant only for stand-alone mode.
+ In shelf this parameter is defined in the trail configuration."
+ ::= { genEquipInterfacesE1T1Entry 1 }
+
+genEquipInterfacesE1T1CurrBER OBJECT-TYPE
+ SYNTAX BerLevel
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "E1/T1 current BER."
+ ::= { genEquipInterfacesE1T1Entry 2 }
+
+genEquipInterfacesE1T1Loopback OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(1),
+ towardsLine(2),
+ towardsRadio(3)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Enable or Disable line loopback on the E1/T1 interface."
+ ::= { genEquipInterfacesE1T1Entry 3 }
+
+genEquipInterfacesE1T1AISSStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ detected(0),
+ notDetected(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Status of the AIS detection, if the AIS detection is activated."
+ ::= { genEquipInterfacesE1T1Entry 4 }
+
+genEquipInterfacesE1T1CableLength OBJECT-TYPE
+ SYNTAX INTEGER {
+ len-0-133ft-0-41m(1),
+ len-133ft-266ft-41m-81m(2),
+ len-266ft-399ft-81m-122m(3),
+ len-399ft-533ft-122m-162m(4),
+ len-533ft-655ft-162m-200m(5)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This parameter is valid only for T1 interfaces, and determines cable length range."
+ ::= { genEquipInterfacesE1T1Entry 5 }
+
+
+
+genEquipInterfacesAux OBJECT IDENTIFIER ::= {genEquipInterfaces 3}
+
+-- Interfaces Way Side
+genEquipInterfacesAuxWaySide OBJECT IDENTIFIER ::= {genEquipInterfacesAux 1}
+
+genEquipInterfacesAuxWaySideTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipInterfacesAuxWaySideEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Way-side interface configuration."
+ ::= { genEquipInterfacesAuxWaySide 1 }
+
+genEquipInterfacesAuxWaySideEntry OBJECT-TYPE
+ SYNTAX GenEquipInterfacesAuxWaySideEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Way-side interface configuration."
+ INDEX { ifIndex }
+ ::= { genEquipInterfacesAuxWaySideTable 1 }
+
+GenEquipInterfacesAuxWaySideEntry ::=
+ SEQUENCE {
+ genEquipInterfacesAuxWaySideAdmin
+ EnableDisable,
+ genEquipInterfacesAuxWaySideCapacity
+ INTEGER,
+ genEquipInterfacesAuxWaySideAutoNegotiation
+ OffOn,
+ genEquipInterfacesAuxWaySideDuplex
+ INTEGER,
+ genEquipInterfacesAuxWaySideRate
+ RateMbps
+}
+
+genEquipInterfacesAuxWaySideAdmin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Enable - Set Ethernet port #4 to be a wayside port. Disabling this option will cause the port to behave
+ as a normal traffic Ethernet port."
+ ::= { genEquipInterfacesAuxWaySideEntry 1 }
+
+
+genEquipInterfacesAuxWaySideCapacity OBJECT-TYPE
+ SYNTAX INTEGER { narrow(0), wide(1) }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Narrow band (64Kbps) or Wide band (2Mbps)"
+ ::= { genEquipInterfacesAuxWaySideEntry 2 }
+
+
+genEquipInterfacesAuxWaySideAutoNegotiation OBJECT-TYPE
+ SYNTAX OffOn
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Wayside port auto negotiation (Off, on)"
+ ::= { genEquipInterfacesAuxWaySideEntry 3 }
+
+genEquipInterfacesAuxWaySideDuplex OBJECT-TYPE
+ SYNTAX INTEGER {
+ not-applicable(-1),
+ half(0),
+ full(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Wayside port duplex (Half, Full)"
+ ::= { genEquipInterfacesAuxWaySideEntry 4 }
+
+genEquipInterfacesAuxWaySideRate OBJECT-TYPE
+ SYNTAX INTEGER {
+ not-applicable(-1),
+ n10(0),
+ n100(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Wayside interface port rate (10Mbps,100Mbps)"
+ ::= { genEquipInterfacesAuxWaySideEntry 5 }
+
+
+
+
+-- Interfaces User channel
+genEquipInterfacesAuxUserChanTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipInterfacesAuxUserChanEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of configured user channels."
+ ::= { genEquipInterfacesAux 2 }
+
+genEquipInterfacesAuxUserChanEntry OBJECT-TYPE
+ SYNTAX GenEquipInterfacesAuxUserChanEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of configured user channels."
+ INDEX { ifIndex }
+ ::= { genEquipInterfacesAuxUserChanTable 1 }
+
+GenEquipInterfacesAuxUserChanEntry ::=
+ SEQUENCE {
+ genEquipInterfacesAuxUserChanType
+ INTEGER
+}
+
+genEquipInterfacesAuxUserChanType OBJECT-TYPE
+ SYNTAX INTEGER {
+ asynchronous-rs232(1),
+ asynchronous-v-11(2),
+ twin-asynchronous-rs232-and-v-11(3),
+ synchronous-v-11-codirectional(4),
+ synchronous-v-11-contradirectional(5)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "User channel type. The asynchronous modes allow two channels, one in each port.
+ The twin asynchronous mode uses port 1 for v.11 and port 2 for RS-232.
+ The Synchronous modes use two ports each"
+ ::= { genEquipInterfacesAuxUserChanEntry 1 }
+
+
+-- Interfaces Sonet/SDH
+genEquipInterfacesSdh OBJECT IDENTIFIER ::= {genEquipInterfaces 4}
+
+genEquipInterfacesSdhTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipInterfacesSdhEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "STM-1,OC-3 interface configuration and status table. "
+ ::= { genEquipInterfacesSdh 1 }
+
+genEquipInterfacesSdhEntry OBJECT-TYPE
+ SYNTAX GenEquipInterfacesSdhEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "STM-1,OC-3 interface configuration and status table."
+ INDEX { ifIndex }
+ ::= { genEquipInterfacesSdhTable 1 }
+
+GenEquipInterfacesSdhEntry ::=
+ SEQUENCE {
+ genEquipInterfacesSdhMuteTx
+ EnableDisableSMI2,
+ genEquipInterfacesSdhClockSource
+ INTEGER,
+ genEquipInterfacesSdhAISAdmin
+ EnableDisable,
+ genEquipInterfacesSdhTraceIdReceived
+ DisplayString,
+ genEquipInterfacesSdhTraceIdTransmitted
+ DisplayString,
+ genEquipInterfacesSdhTraceIdExpected
+ DisplayString,
+ genEquipInterfacesSdhTraceIdStringLength
+ INTEGER,
+ genEquipInterfacesSdhExcessiveBer
+ INTEGER,
+ genEquipInterfacesSdhSignalDegrade
+ INTEGER,
+ genEquipInterfacesSdhLoopback
+ INTEGER,
+ genEquipInterfacesSdhClockSourceStatus
+ INTEGER,
+ genEquipInterfacesSdhLineTxProtectionMode
+ INTEGER,
+ genEquipInterfacesSdhSyncVC
+ INTEGER,
+ genEquipInterfacesSdhAdmin
+ EnableDisableSMI2,
+ genEquipInterfacesSdhPdhTimingMode
+ PWPDHClockSource,
+ genEquipInterfacesSdhSlot
+ INTEGER,
+ genEquipInterfacesSdhIdleCode
+ INTEGER,
+ genEquipInterfacesSdhSSMAdmin
+ EnableDisableSMI2,
+ genEquipInterfacesSdhSSMPattern
+ INTEGER,
+ genEquipInterfacesSdhTraceIdAdmin
+ EnableDisableSMI2,
+ genEquipInterfacesSdhVCSignalLabel
+ INTEGER,
+ genEquipInterfacesSdhVcRdiAdmin
+ EnableDisableSMI2
+}
+
+genEquipInterfacesSdhMuteTx OBJECT-TYPE
+ SYNTAX EnableDisableSMI2
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Mute Tx option on the interface."
+ ::= { genEquipInterfacesSdhEntry 1 }
+
+genEquipInterfacesSdhClockSource OBJECT-TYPE
+ SYNTAX INTEGER {
+ internal-clock(0),
+ loop(1),
+ synchronization-vc(2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The source of the clock being used.
+ sync-vc option is for future support, to use one of the outgoing TDM VCs as a source."
+ ::= { genEquipInterfacesSdhEntry 2 }
+
+genEquipInterfacesSdhAISAdmin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Enable, Disable AIS signaling at the V5 byte on the STM-1, OC-3 interface."
+ ::= { genEquipInterfacesSdhEntry 3 }
+
+genEquipInterfacesSdhTraceIdReceived OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "J0 Trace Identifier signal that was received on the interface."
+ ::= { genEquipInterfacesSdhEntry 4 }
+
+genEquipInterfacesSdhTraceIdTransmitted OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "J0 Trace Identifier signal that is transmitted on the interface."
+ ::= { genEquipInterfacesSdhEntry 5 }
+
+genEquipInterfacesSdhTraceIdExpected OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "J0 Trace Identifier signal that is expected to be received on the interface."
+ ::= { genEquipInterfacesSdhEntry 6 }
+
+genEquipInterfacesSdhTraceIdStringLength OBJECT-TYPE
+ SYNTAX INTEGER {
+ len1(0),
+ len15(1),
+ len62(2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Trace identifier string length. Lengths 0 and 15 are valid for SDH systems. Length 62 is additionally available in SONET systems."
+ ::= { genEquipInterfacesSdhEntry 7 }
+
+genEquipInterfacesSdhExcessiveBer OBJECT-TYPE
+ SYNTAX INTEGER { n1e-3(0), n1e-4(1), n1e-5(2) }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Excessive BER threshold on the interface."
+ ::= { genEquipInterfacesSdhEntry 8 }
+
+genEquipInterfacesSdhSignalDegrade OBJECT-TYPE
+ SYNTAX INTEGER { n1e-6(3), n1e-7(4), n1e-8(5), n1e-9(6) }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Signal degrade threshold on the interface."
+ ::= { genEquipInterfacesSdhEntry 9 }
+
+genEquipInterfacesSdhLoopback OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ loopback-towards-system(1),
+ loopback-towards-line(2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "SDH Loopback."
+ ::= { genEquipInterfacesSdhEntry 10 }
+
+genEquipInterfacesSdhClockSourceStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ internal-clock(0),
+ loop(1),
+ synchronization-vc(2)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The actual source of the clock for the outgoing STM-1/OC-3 signal.
+ It may differ from the desired source if the source signal is missing or corrupt"
+ ::= { genEquipInterfacesSdhEntry 11 }
+
+genEquipInterfacesSdhLineTxProtectionMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ normal(1),
+ uni-directional-MSP(2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "this parameter configures the behavior of the transmitting line in a 1+1 HSB configuration.
+ In normal mode the stand-by signal is silenced. In uni-directional MSP both units will transmit"
+ ::= { genEquipInterfacesSdhEntry 12 }
+
+genEquipInterfacesSdhSyncVC OBJECT-TYPE
+ SYNTAX INTEGER (1..63)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The outgoing VC signal to be taken as the STM-1/OC-3 synchronization source if
+ genEquipInterfacesSdhClockSource is set to synchronization-vc"
+ ::= { genEquipInterfacesSdhEntry 13 }
+
+genEquipInterfacesSdhAdmin OBJECT-TYPE
+ SYNTAX EnableDisableSMI2
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Administrative status of the STM-1/OC3 port"
+ ::= { genEquipInterfacesSdhEntry 14 }
+
+genEquipInterfacesSdhPdhTimingMode OBJECT-TYPE
+ SYNTAX EnableDisableSMI2
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Clock reference for outgoing PDH signals configured in 'absolute clock' mode"
+ ::= { genEquipInterfacesSdhEntry 15 }
+
+genEquipInterfacesSdhSlot OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Slot ID"
+ ::= { genEquipInterfacesSdhEntry 16 }
+
+genEquipInterfacesSdhIdleCode OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Value to be transmitted at PDH signals inside the STM-1/OC3 when there is no data to transmit"
+ ::= { genEquipInterfacesSdhEntry 17 }
+
+genEquipInterfacesSdhSSMAdmin OBJECT-TYPE
+ SYNTAX EnableDisableSMI2
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "SSM support admin for this interface"
+ ::= { genEquipInterfacesSdhEntry 18 }
+
+genEquipInterfacesSdhSSMPattern OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates the default SSM pattern to be transmitted in case if TCC clock synchronization subsystem doesn't provide SSM pattern value"
+ ::= { genEquipInterfacesSdhEntry 19 }
+
+genEquipInterfacesSdhTraceIdAdmin OBJECT-TYPE
+ SYNTAX EnableDisableSMI2
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Enable/disable of J0 mismatch checking on RX direction"
+ ::= { genEquipInterfacesSdhEntry 20 }
+
+genEquipInterfacesSdhVCSignalLabel OBJECT-TYPE
+ SYNTAX INTEGER {
+ asynchronous(0),
+ non-specific-payload(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Sets the signal label bits to be sent and expected in every VC-11/12;
+ use non-specific payload only for backwards compatibility with old equipment"
+ ::= { genEquipInterfacesSdhEntry 21 }
+
+genEquipInterfacesSdhVcRdiAdmin OBJECT-TYPE
+ SYNTAX EnableDisableSMI2
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "VC-RDI signaling admin status"
+ ::= { genEquipInterfacesSdhEntry 22 }
+
+
+-- LPVC (Low Oreder Path VC)
+genEquipInterfacesSdhLpVcTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipInterfacesSdhLpVcEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table includes properties for each Low-order path VC (VC-11/12) in the SDH interface. "
+ ::= { genEquipInterfacesSdh 2 }
+
+genEquipInterfacesSdhLpVcEntry OBJECT-TYPE
+ SYNTAX GenEquipInterfacesSdhLpVcEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table includes properties for each Low-order path VC (VC-11/12) in the SDH interface. "
+ INDEX { ifIndex, genEquipInterfacesSdhLpVcId }
+ ::= { genEquipInterfacesSdhLpVcTable 1 }
+
+GenEquipInterfacesSdhLpVcEntry ::=
+ SEQUENCE {
+ genEquipInterfacesSdhLpVcId
+ INTEGER,
+ genEquipInterfacesSdhLpVcAIS
+ INTEGER
+}
+
+genEquipInterfacesSdhLpVcId OBJECT-TYPE
+ SYNTAX INTEGER (1..84)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "VC-11 or VC-12 number; VCs are numbered according to standard KLM order. "
+ ::= { genEquipInterfacesSdhLpVcEntry 1 }
+
+genEquipInterfacesSdhLpVcAIS OBJECT-TYPE
+ SYNTAX INTEGER {
+ aisDetected(0),
+ aisNotDetected(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether incoming AIS is currently detected in the VC's payload. 0 indicates that AIS is detected, 1 that is not detected."
+ ::= { genEquipInterfacesSdhLpVcEntry 2 }
+
+
+-- TDM pw-stm1oc3-status-table
+genEquipInterfacesSdhStatusTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipInterfacesSdhStatusEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "SDH Status. "
+ ::= { genEquipInterfacesSdh 3 }
+
+genEquipInterfacesSdhStatusEntry OBJECT-TYPE
+ SYNTAX GenEquipInterfacesSdhStatusEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "SDH Status"
+ INDEX { genEquipInterfacesSdhStatusIfIndex }
+ ::= { genEquipInterfacesSdhStatusTable 1 }
+
+GenEquipInterfacesSdhStatusEntry ::=
+ SEQUENCE {
+ genEquipInterfacesSdhStatusIfIndex
+ INTEGER,
+ genEquipInterfacesSdhStatusLine
+ INTEGER,
+ genEquipInterfacesSdhStatusOperState
+ DownUp,
+ genEquipInterfacesSdhStatusRegenerator
+ INTEGER,
+ genEquipInterfacesSdhStatusClockSourceStatus
+ PWPDHClockSource,
+ genEquipInterfacesSdhStatusPdhClockStatus
+ PWPDHClockSource,
+ genEquipInterfacesSdhStatusSlotId
+ INTEGER,
+ genEquipInterfacesSdhStatusLoopback
+ INTEGER,
+ genEquipInterfacesSdhStatusMultiplexer
+ INTEGER,
+ genEquipInterfacesSdhStatusSsmRx
+ INTEGER,
+ genEquipInterfacesSdhStatusSsmTx
+ INTEGER
+}
+
+genEquipInterfacesSdhStatusIfIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Portnumber"
+ ::= { genEquipInterfacesSdhStatusEntry 1 }
+
+
+genEquipInterfacesSdhStatusLine OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Bitmap field according to the following values: no-defect (1), AIS (2), RDI (4)"
+ ::= { genEquipInterfacesSdhStatusEntry 2 }
+
+genEquipInterfacesSdhStatusOperState OBJECT-TYPE
+ SYNTAX DownUp
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Interface operational status"
+ ::= { genEquipInterfacesSdhStatusEntry 3 }
+
+genEquipInterfacesSdhStatusRegenerator OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Bitmap field according to the following values: no-defect (1), AIS (2), RDI (4)"
+ ::= { genEquipInterfacesSdhStatusEntry 4 }
+
+genEquipInterfacesSdhStatusClockSourceStatus OBJECT-TYPE
+ SYNTAX PWPDHClockSource
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The actual source of the clock for the outgoing STM-1/OC-3 signal.
+ It may differ from the desired source if the source signal is missing or corrupt"
+ ::= { genEquipInterfacesSdhStatusEntry 5 }
+
+genEquipInterfacesSdhStatusPdhClockStatus OBJECT-TYPE
+ SYNTAX PWPDHClockSource
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "PDH clock source status"
+ ::= { genEquipInterfacesSdhStatusEntry 6 }
+
+genEquipInterfacesSdhStatusSlotId OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Slot ID"
+ ::= { genEquipInterfacesSdhStatusEntry 7 }
+
+genEquipInterfacesSdhStatusLoopback OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ towards-system(1),
+ towards-line(2)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The current state of the loopback for the SONET/SDH interface"
+ ::= { genEquipInterfacesSdhStatusEntry 8 }
+
+genEquipInterfacesSdhStatusMultiplexer OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Bitmask: no-defect (1), STS-LOP(2), STS-AIS(4), STS-RDI(8), unequipped (16), label-mismatch (32)"
+ ::= { genEquipInterfacesSdhStatusEntry 9 }
+
+genEquipInterfacesSdhStatusSsmRx OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates the currently received SSM bits "
+ ::= { genEquipInterfacesSdhStatusEntry 10 }
+
+genEquipInterfacesSdhStatusSsmTx OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates the currently transmitted SSM bits "
+ ::= { genEquipInterfacesSdhStatusEntry 11 }
+
+
+--
+-- TDM pw-stm1oc3-loopback-status-table
+
+genEquipInterfacesSdhLoopbackStatusTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipInterfacesSdhLoopbackStatusEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "SONET/SDH interface loopback status"
+ ::= { genEquipInterfacesSdh 4 }
+
+genEquipInterfacesSdhLoopbackStatusEntry OBJECT-TYPE
+ SYNTAX GenEquipInterfacesSdhLoopbackStatusEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "SONET/SDH interface loopback status entry"
+ INDEX { genEquipInterfacesSdhLoopbackStatusIfIndex }
+ ::= { genEquipInterfacesSdhLoopbackStatusTable 1 }
+
+GenEquipInterfacesSdhLoopbackStatusEntry ::=
+ SEQUENCE {
+ genEquipInterfacesSdhLoopbackStatusIfIndex
+ INTEGER,
+ genEquipInterfacesSdhLoopbackStatusSlotId
+ INTEGER,
+ genEquipInterfacesSdhLoopbackStatusType
+ INTEGER,
+ genEquipInterfacesSdhLoopbackStatusCounter
+ INTEGER
+}
+
+genEquipInterfacesSdhLoopbackStatusIfIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Portnumber"
+ ::= { genEquipInterfacesSdhLoopbackStatusEntry 1 }
+
+
+genEquipInterfacesSdhLoopbackStatusSlotId OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Slot ID"
+ ::= { genEquipInterfacesSdhLoopbackStatusEntry 2 }
+
+genEquipInterfacesSdhLoopbackStatusType OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ towards-system(1),
+ towards-line(2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Interface operational status"
+ ::= { genEquipInterfacesSdhLoopbackStatusEntry 3 }
+
+genEquipInterfacesSdhLoopbackStatusCounter OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Current value of STM1/OC3 interface Looback Timeout Counter"
+ ::= { genEquipInterfacesSdhLoopbackStatusEntry 4 }
+
+
+-- Interfaces AIS
+genEquipInterfacesAIS OBJECT IDENTIFIER ::= {genEquipInterfaces 5}
+
+genEquipInterfacesAISAdmin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Control AIS Detection over all E1/T1/SDH ports."
+ ::= { genEquipInterfacesAIS 1 }
+
+-- Automatic State Propagation
+genEquipInterfacesASP OBJECT IDENTIFIER ::= {genEquipInterfaces 6}
+
+genEquipInterfacesASPAdmin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Controls the Automatic State Propagation"
+ ::= { genEquipInterfacesASP 1 }
+
+genEquipInterfacesASPLocalLOC OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Enables fault propagation upon detection of local LOC.
+ This configuration is relevant only for non-protected single-pipe switch mode only."
+ ::= { genEquipInterfacesASP 2 }
+
+genEquipInterfacesASPLocalExcessiveBER OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Enables fault propagation to the Ethernet interface upon detection of radio excessive BER.
+ This configuration is relevant only for non-protected single-pipe switch mode only."
+
+ ::= { genEquipInterfacesASP 3 }
+
+genEquipInterfacesASPACMthreshold OBJECT-TYPE
+ SYNTAX INTEGER {
+ profile-0(0),
+ profile-1(1),
+ profile-2(2),
+ profile-3(3),
+ profile-4(4),
+ profile-5(5),
+ profile-6(6),
+ profile-7(7)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Enable or disable the propagation when Radio ACM profile degrades below a defined profile.
+ This configuration is relevant only for non-protected single-pipe switch mode only when ACM
+ radio script is running."
+ ::= { genEquipInterfacesASP 4 }
+
+genEquipInterfacesASPRemoteFault OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This parameter enables/disables automatic state propagation.
+ The following remote faults are propagated to the NE by default:
+ - Radio LOF
+ - Radio link ID mismatch
+ - Ethernet line LOC
+ any other remote faults are propagated to the NE only if they are
+ enabled at the local NE"
+ ::= { genEquipInterfacesASP 5 }
+
+-- NG ASP
+genEquipInterfacesNGASP OBJECT IDENTIFIER ::= {genEquipInterfacesASP 7}
+
+--
+-- Automatic state propagation configuration table - asp-config-table
+--
+
+genEquipInterfacesNGASPConfigTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipInterfacesNGASPConfigEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table configures automatic state propagation functionality."
+ ::= { genEquipInterfacesNGASP 1 }
+
+genEquipInterfacesNGASPConfigEntry OBJECT-TYPE
+ SYNTAX GenEquipInterfacesNGASPConfigEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table configures automatic state propagation functionality entry."
+ INDEX { genEquipInterfacesNGASPConfigControlledInterfaceIfindex }
+ ::= { genEquipInterfacesNGASPConfigTable 1 }
+
+GenEquipInterfacesNGASPConfigEntry ::=
+ SEQUENCE {
+ genEquipInterfacesNGASPConfigControlledInterfaceIfindex
+ INTEGER,
+ genEquipInterfacesNGASPConfigAdmin
+ EnableDisable,
+ genEquipInterfacesNGASPConfigMonitoredInterfaceIfindex
+ INTEGER,
+ genEquipInterfacesNGASPConfigAcmThreshold
+ INTEGER,
+ genEquipInterfacesNGASPConfigRadioExcessiveBerCriterionAdmin
+ EnableDisable,
+ genEquipInterfacesNGASPConfigLinkIdMismatchCriterionAdmin
+ EnableDisable,
+ genEquipInterfacesNGASPConfigRadioLofCriterionAdmin
+ EnableDisable,
+ genEquipInterfacesNGASPConfigRemoteRadioLofCriterionAdmin
+ EnableDisable,
+ genEquipInterfacesNGASPConfigRxAcmThresholdCriterionAdmin
+ EnableDisable,
+ genEquipInterfacesNGASPConfigTxAcmThresholdCriterionAdmin
+ EnableDisable,
+ genEquipInterfacesNGASPConfigRemoteEthLocCriterionAdmin
+ EnableDisable,
+ genEquipInterfacesNGASPConfigRemoteFaultTriggerAdmin
+ EnableDisable,
+ genEquipInterfacesNGASPConfigRemoteRadioExcessiveBerCriterionAdmin
+ EnableDisable,
+ genEquipInterfacesNGASPConfigMonitoredInterface56
+ INTEGER,
+ genEquipInterfacesNGASPConfigCsfModeAdmin
+ EnableDisable,
+ genEquipInterfacesNGASPConfigMonitoredInterface
+ INTEGER,
+ genEquipInterfacesNGASPConfigDelayTime
+ INTEGER,
+ genEquipInterfacesNGASPConfigRowStatus
+ RowStatus
+ }
+
+genEquipInterfacesNGASPConfigControlledInterfaceIfindex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Index of the controlled interface.
+ This interface will be disabled upon initiation of auto state propagation"
+ ::= { genEquipInterfacesNGASPConfigEntry 1 }
+
+genEquipInterfacesNGASPConfigAdmin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Enables/disables automatic state propagation."
+ ::= { genEquipInterfacesNGASPConfigEntry 2 }
+
+genEquipInterfacesNGASPConfigMonitoredInterfaceIfindex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Index to the monitored interface.
+ Auto state propagation will act upon detecting a failure indication on this interface."
+ ::= { genEquipInterfacesNGASPConfigEntry 3 }
+
+genEquipInterfacesNGASPConfigAcmThreshold OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "ACM profile threshold for initiating auto state propagation."
+ ::= { genEquipInterfacesNGASPConfigEntry 4 }
+
+genEquipInterfacesNGASPConfigRadioExcessiveBerCriterionAdmin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Initiate auto state propagation upon local radio excessive BER."
+ ::= { genEquipInterfacesNGASPConfigEntry 5 }
+
+
+genEquipInterfacesNGASPConfigLinkIdMismatchCriterionAdmin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Initiate auto state propagation upon local radio link Id mismatch."
+ ::= { genEquipInterfacesNGASPConfigEntry 6 }
+
+genEquipInterfacesNGASPConfigRadioLofCriterionAdmin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Initiate auto state propagation upon local radio LOF."
+ ::= { genEquipInterfacesNGASPConfigEntry 7 }
+
+genEquipInterfacesNGASPConfigRemoteRadioLofCriterionAdmin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Initiate auto state propagation upon remote radio LOF."
+ ::= { genEquipInterfacesNGASPConfigEntry 8 }
+
+genEquipInterfacesNGASPConfigRxAcmThresholdCriterionAdmin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Initiate auto state propagation upon radio ACM RX profile below threshold."
+ ::= { genEquipInterfacesNGASPConfigEntry 9 }
+
+genEquipInterfacesNGASPConfigTxAcmThresholdCriterionAdmin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Initiate auto state propagation upon radio ACM TX profile below threshold."
+ ::= { genEquipInterfacesNGASPConfigEntry 10 }
+
+genEquipInterfacesNGASPConfigRemoteEthLocCriterionAdmin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Initiate auto state propagation due to remote ethernet LOC."
+ ::= { genEquipInterfacesNGASPConfigEntry 11 }
+
+genEquipInterfacesNGASPConfigRemoteFaultTriggerAdmin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Auto state propagation trigger by remote fault."
+ ::= { genEquipInterfacesNGASPConfigEntry 12 }
+
+genEquipInterfacesNGASPConfigRemoteRadioExcessiveBerCriterionAdmin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Initiate auto state propagation upon remote radio excessive BER."
+ ::= { genEquipInterfacesNGASPConfigEntry 13 }
+
+genEquipInterfacesNGASPConfigMonitoredInterface56 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Index to the monitored interface. Auto state propagation will act upon detecting a failure indication on this interface."
+ ::= { genEquipInterfacesNGASPConfigEntry 14 }
+
+genEquipInterfacesNGASPConfigCsfModeAdmin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This mode upon failure sends CSF OAM packet instead of shuting down port."
+ ::= { genEquipInterfacesNGASPConfigEntry 15 }
+
+genEquipInterfacesNGASPConfigMonitoredInterface OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Index to the monitored interface. Auto state propagation will act upon detecting a failure indication on this interface."
+ ::= { genEquipInterfacesNGASPConfigEntry 16 }
+
+genEquipInterfacesNGASPConfigDelayTime OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Debounce time for ASP (in milliseconds)"
+ ::= { genEquipInterfacesNGASPConfigEntry 17 }
+
+genEquipInterfacesNGASPConfigRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Row status to allow user add entries dynamically."
+ ::= { genEquipInterfacesNGASPConfigEntry 30 }
+
+
+
+-- PW T-card
+genEquipInterfacesPW OBJECT IDENTIFIER ::= {genEquipInterfaces 7}
+
+genEquipInterfacesPWCardTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipInterfacesPWCardEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "PW-Card configuration table. using the table to configure the system PW-T features."
+ ::= { genEquipInterfacesPW 1 }
+
+genEquipInterfacesPWCardEntry OBJECT-TYPE
+ SYNTAX GenEquipInterfacesPWCardEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "PW-Card configuration table. using the table to configure the system PW-T features."
+ INDEX { genEquipInterfacesPWCardSlotNumber }
+ ::= { genEquipInterfacesPWCardTable 1 }
+
+GenEquipInterfacesPWCardEntry ::=
+ SEQUENCE {
+ genEquipInterfacesPWCardSlotNumber
+ INTEGER,
+ genEquipInterfacesPWCardExportClkSysRef
+ INTEGER,
+ genEquipInterfacesPWCardExportClkFrontPannel
+ INTEGER,
+ genEquipInterfacesPWCardExportClkSysRefCrPort
+ INTEGER,
+ genEquipInterfacesPWCardExportClkFrontPanelCrPort
+ INTEGER,
+ genEquipInterfacesPWCardFrontPanelClockSignalInput
+ INTEGER,
+ genEquipInterfacesPWCardFrontPanelClockSignalOutp
+ INTEGER,
+ genEquipInterfacesPWCardIpAddrUdpIpTraffic
+ IpAddress,
+ genEquipInterfacesPWCardIpSubnetUdpIpTraffic
+ IpAddress,
+ genEquipInterfacesPWCardClkRecoveryMode
+ INTEGER,
+ genEquipInterfacesPWCardDifferentialClkFrequency
+ INTEGER,
+ genEquipInterfacesPWCardDifferentialClkSource
+ INTEGER
+}
+
+genEquipInterfacesPWCardSlotNumber OBJECT-TYPE
+ SYNTAX INTEGER (2..12)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Slot number where the relevant PW card is inserted."
+::= { genEquipInterfacesPWCardEntry 1 }
+
+genEquipInterfacesPWCardExportClkSysRef OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0),
+ frontPanel(1),
+ clockRecovery(2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Which card clock to provide as source towards system reference clock;
+ FrontPanel takes the clock inserted into the front panel interface;
+ ClockRecovery takes the clock recovered from the PW service mapped to the TDM port defined in ExportClkSysRefCrPort."
+::= { genEquipInterfacesPWCardEntry 2 }
+
+genEquipInterfacesPWCardExportClkFrontPannel OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0),
+ sysRefClk(1),
+ clockRecovery(2)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Which clock to export to the front panel clock; SysRefClk exports the system reference clock;
+ ClockRecovery exports the clock recovered from the PW service mapped to the TDM port defined in ExportClkFrontPanelCrPort."
+
+::= { genEquipInterfacesPWCardEntry 3 }
+
+genEquipInterfacesPWCardExportClkSysRefCrPort OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "TDM port serving as clock recovery reference if ExportClkSysRef is set to ClockRecovery."
+::= { genEquipInterfacesPWCardEntry 4 }
+
+genEquipInterfacesPWCardExportClkFrontPanelCrPort OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "TDM port serving as clock recovery reference if ExportClkFrontPannel is set to ClockRecovery."
+::= { genEquipInterfacesPWCardEntry 5 }
+
+genEquipInterfacesPWCardFrontPanelClockSignalInput OBJECT-TYPE
+ SYNTAX INTEGER {
+ sync(0),
+ e1t1(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Configure the type of input clock signal of the front panel port.
+ Sync is 2.048MHz/1.544MHz (differential sine/square 3.3V); e1t1 is a G.823/G.824 signal."
+::= { genEquipInterfacesPWCardEntry 6 }
+
+genEquipInterfacesPWCardFrontPanelClockSignalOutp OBJECT-TYPE
+ SYNTAX INTEGER {
+ sync(0),
+ e1t1(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Configure the type of output clock signal of the front panel port.
+ Sync is 2.048MHz/1.544MHz (differential sine/square 3.3V); e1t1 is a G.823/G.824 signal."
+::= { genEquipInterfacesPWCardEntry 7 }
+
+genEquipInterfacesPWCardIpAddrUdpIpTraffic OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "IP Address for UDP/IP encapsulated PWs."
+::= { genEquipInterfacesPWCardEntry 8 }
+
+genEquipInterfacesPWCardIpSubnetUdpIpTraffic OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "IP Subnet for UDP/IP encapsulated PWs."
+::= { genEquipInterfacesPWCardEntry 9 }
+
+genEquipInterfacesPWCardClkRecoveryMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ adaptive(0),
+ differential(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Clock recovery mode for the card."
+::= { genEquipInterfacesPWCardEntry 10 }
+
+genEquipInterfacesPWCardDifferentialClkFrequency OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0),
+ n25MHz(1),
+ n125MHz(2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Frequency for differential clock (none for adaptive)."
+::= { genEquipInterfacesPWCardEntry 11 }
+
+genEquipInterfacesPWCardDifferentialClkSource OBJECT-TYPE
+ SYNTAX INTEGER {
+ none (0),
+ sysReference(2),
+ frontPanel(3),
+ n1588(4)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Reference clock source for differential clock recovery (none for adaptive)."
+::= { genEquipInterfacesPWCardEntry 12 }
+
+
+-- PW t-card TDM ports table
+genEquipInterfacesServicesPWTDMPortsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipInterfacesServicesPWTDMPortsEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table allows configuration of the 16 internal E1/DS1 ports."
+ ::= { genEquipInterfacesPW 2 }
+
+genEquipInterfacesServicesPWTDMPortsEntry OBJECT-TYPE
+ SYNTAX GenEquipInterfacesServicesPWTDMPortsEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table allows configuration of the 16 internal E1/DS1 ports."
+ INDEX { ifIndex }
+ ::= { genEquipInterfacesServicesPWTDMPortsTable 1 }
+
+GenEquipInterfacesServicesPWTDMPortsEntry ::=
+ SEQUENCE {
+ genEquipInterfacesServicesPWTDMPortsLineType
+ INTEGER,
+ genEquipInterfacesServicesPWTDMPortsLineCoding
+ INTEGER,
+ genEquipInterfacesServicesPWTDMPortsAssigned
+ NoYes,
+ genEquipInterfacesServicesPWTDMPortsChannelization
+ EnableDisable,
+ genEquipInterfacesServicesPWTDMPortsTimingMode
+ INTEGER,
+ genEquipInterfacesServicesPWTDMPortsClockSourceRef
+ INTEGER,
+ genEquipInterfacesServicesPWTDMPortsClkSrcRefPort
+ INTEGER,
+ genEquipInterfacesServicesPWTDMPortsClkSrcPWId
+ INTEGER,
+ genEquipInterfacesServicesPWTDMPortsLoopback
+ INTEGER,
+ genEquipInterfacesServicesPWTDMPortsTimeout
+ INTEGER,
+ genEquipInterfacesServicesPWTDMPortsIdleCode
+ INTEGER,
+ genEquipInterfacesServicesPWTDMPortsCounter
+ INTEGER,
+ genEquipInterfacesServicesPWTDMPortsLineStatus
+ INTEGER
+}
+
+
+genEquipInterfacesServicesPWTDMPortsLineType OBJECT-TYPE
+ SYNTAX INTEGER {
+ e1Unframed(0),
+ e1(1),
+ e1Crc(2),
+ e1Mf(3),
+ e1MfCrc(4),
+ ds1Uxnframed(5),
+ ds1Sf(6),
+ ds1Esf(7)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Line type of this TDM port. E1 types are for E1 systems and DS1 types for DS1 systems."
+::= { genEquipInterfacesServicesPWTDMPortsEntry 1 }
+
+genEquipInterfacesServicesPWTDMPortsLineCoding OBJECT-TYPE
+ SYNTAX NoYes
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Line coding for this port. The value hdb3-b8zs means b8zs for T1 and hdb3 for E1.
+ Ami is only for T1."
+::= { genEquipInterfacesServicesPWTDMPortsEntry 2 }
+
+genEquipInterfacesServicesPWTDMPortsAssigned OBJECT-TYPE
+ SYNTAX NoYes
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indication whether this port is currently assigned to a TDM trail."
+
+::= { genEquipInterfacesServicesPWTDMPortsEntry 3 }
+
+genEquipInterfacesServicesPWTDMPortsChannelization OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "TIndication whether this TDM port is channelized into DS0s."
+::= { genEquipInterfacesServicesPWTDMPortsEntry 4 }
+
+genEquipInterfacesServicesPWTDMPortsTimingMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ loop(0),
+ absolute(1),
+ clockRecovery(2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Transmission towards TDM timing mode.
+ Loop means transmitting with the received clock from TDM signal.
+ Absolute means transmitting with the clock selected by ClockSourceRef.
+ ClockRecovery means adaptive clock recovery mode."
+::= { genEquipInterfacesServicesPWTDMPortsEntry 5 }
+
+genEquipInterfacesServicesPWTDMPortsClockSourceRef OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0),
+ sysRefClk(1),
+ frontPanel(2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Clock source reference for Absolute clock mode.
+ 'none' for loop or clock-recovery timing modes."
+::= { genEquipInterfacesServicesPWTDMPortsEntry 6 }
+
+genEquipInterfacesServicesPWTDMPortsClkSrcRefPort OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "TDM port serving as a clock reference for loop or clock-recovery timing modes"
+::= { genEquipInterfacesServicesPWTDMPortsEntry 7 }
+
+genEquipInterfacesServicesPWTDMPortsClkSrcPWId OBJECT-TYPE
+ SYNTAX INTEGER (0..256)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "PW ID (as defined in genEquipServicesPWServicePWId) from which clock will be derived
+ for this port when TimingMode is ClockRecovery."
+::= { genEquipInterfacesServicesPWTDMPortsEntry 8 }
+
+genEquipInterfacesServicesPWTDMPortsLoopback OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(1),
+ towardsLine(2),
+ towardsSystem(3)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Enable or Disable line loopback on the E1/T1 interface."
+::= { genEquipInterfacesServicesPWTDMPortsEntry 9 }
+
+genEquipInterfacesServicesPWTDMPortsTimeout OBJECT-TYPE
+ SYNTAX INTEGER (0..1440)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Line loopback timeout, in minutes. 0 means no timer."
+::= { genEquipInterfacesServicesPWTDMPortsEntry 10 }
+
+genEquipInterfacesServicesPWTDMPortsIdleCode OBJECT-TYPE
+ SYNTAX INTEGER (0..255)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Value to be transmitted on this TDM port in unused timeslots."
+::= { genEquipInterfacesServicesPWTDMPortsEntry 11 }
+
+genEquipInterfacesServicesPWTDMPortsCounter OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Loopback time left (in seconds)."
+::= { genEquipInterfacesServicesPWTDMPortsEntry 12 }
+
+genEquipInterfacesServicesPWTDMPortsLineStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ noAlarm(0),
+ rxLof(1),
+ txLof(2),
+ rxAis(3),
+ txAis(4),
+ ts16RxLomf(5),
+ ts16TxLomf(6),
+ loopbackAlarm(7),
+ otherFailure(8)
+
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Line status of this TDM port."
+::= { genEquipInterfacesServicesPWTDMPortsEntry 13 }
+
+--
+-- NG PW Interfaces
+--
+genEquipInterfacesNGPW OBJECT IDENTIFIER ::= {genEquipInterfacesPW 3}
+
+--
+-- PW-LIC card configuration table - pw-card-configuration-table
+--
+genEquipInterfacesNGPWCardTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipInterfacesNGPWCardEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table allows configuration of PW-LIC card level parameters."
+ ::= { genEquipInterfacesNGPW 1 }
+
+genEquipInterfacesNGPWCardEntry OBJECT-TYPE
+ SYNTAX GenEquipInterfacesNGPWCardEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table entry allows configuration of PW-LIC card level parameters."
+ INDEX { genEquipInterfacesNGPWCardSlotID }
+ ::= { genEquipInterfacesNGPWCardTable 1 }
+
+GenEquipInterfacesNGPWCardEntry ::=
+ SEQUENCE {
+ genEquipInterfacesNGPWCardSlotID
+ INTEGER,
+ genEquipInterfacesNGPWCardExportClkSysRef
+ PWCclockSysRef,
+ genEquipInterfacesNGPWCardExportClkSysRefCrPort
+ INTEGER,
+ genEquipInterfacesNGPWCardIPAddress
+ IpAddress,
+ genEquipInterfacesNGPWCardIPSubnetMask
+ IpAddress,
+ genEquipInterfacesNGPWCardClkRecoveryMode
+ INTEGER,
+ genEquipInterfacesNGPWCardDifferentialClkSource
+ PWCDiffClockSrc,
+ genEquipInterfacesNGPWCardClockFreq
+ INTEGER,
+ genEquipInterfacesNGPWCardTDMType
+ INTEGER,
+ genEquipInterfacesNGPWCardLoopbackTimeout
+ INTEGER
+}
+
+genEquipInterfacesNGPWCardSlotID OBJECT-TYPE
+ SYNTAX INTEGER (2..12)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Slot where PW-LIC is inserted."
+::= { genEquipInterfacesNGPWCardEntry 1 }
+
+genEquipInterfacesNGPWCardExportClkSysRef OBJECT-TYPE
+ SYNTAX PWCclockSysRef
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Configures which clock the PW-LIC exports towards the system."
+::= { genEquipInterfacesNGPWCardEntry 2 }
+
+genEquipInterfacesNGPWCardExportClkSysRefCrPort OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "TDM port serving as clock recovery reference towards the system."
+::= { genEquipInterfacesNGPWCardEntry 3 }
+
+genEquipInterfacesNGPWCardIPAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "IP Address for UDP/IP and MPLS encapsulations."
+::= { genEquipInterfacesNGPWCardEntry 4 }
+
+genEquipInterfacesNGPWCardIPSubnetMask OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "IP subnet mask for UDP/IP and MPLS encapsulations."
+::= { genEquipInterfacesNGPWCardEntry 5 }
+
+genEquipInterfacesNGPWCardClkRecoveryMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ adaptive(0),
+ differential(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Sets the card either in ACR or differential clock recovery mode."
+::= { genEquipInterfacesNGPWCardEntry 6 }
+
+genEquipInterfacesNGPWCardDifferentialClkSource OBJECT-TYPE
+ SYNTAX PWCDiffClockSrc
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Reference clock source for differential clock recovery (none for adaptive)."
+::= { genEquipInterfacesNGPWCardEntry 7 }
+
+genEquipInterfacesNGPWCardClockFreq OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0),
+ fr-25(1),
+ fr-125(2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Frequency for differential clock (none for adaptive)."
+::= { genEquipInterfacesNGPWCardEntry 8 }
+
+genEquipInterfacesNGPWCardTDMType OBJECT-TYPE
+ SYNTAX INTEGER {
+ e1(0),
+ ds1(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Type of TDM interfaces (E1, DS1)."
+::= { genEquipInterfacesNGPWCardEntry 9 }
+
+genEquipInterfacesNGPWCardLoopbackTimeout OBJECT-TYPE
+ SYNTAX INTEGER (0..1440)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Timeout for TDM ports loopback."
+::= { genEquipInterfacesNGPWCardEntry 10 }
+
+
+-- pwe3-pwc-fp-clock-configuration-table
+genEquipInterfacesNGPWClockInterfaceTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipInterfacesNGPWClockInterfaceEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table allows configuration of the front panel clock interface in the PW-LIC."
+ ::= { genEquipInterfacesNGPW 3 }
+
+genEquipInterfacesNGPWClockInterfaceEntry OBJECT-TYPE
+ SYNTAX GenEquipInterfacesNGPWClockInterfaceEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table entry allows configuration of the front panel clock interface in the PW-LIC."
+ INDEX { genEquipInterfacesNGPWClockInterfaceSlotID }
+ ::= { genEquipInterfacesNGPWClockInterfaceTable 1 }
+
+GenEquipInterfacesNGPWClockInterfaceEntry ::=
+ SEQUENCE {
+ genEquipInterfacesNGPWClockInterfaceSlotID
+ INTEGER,
+ genEquipInterfacesNGPWClockInterfaceIfIndex
+ INTEGER,
+ genEquipInterfacesNGPWClockInterfaceAdminRx
+ EnableDisableSMI2,
+ genEquipInterfacesNGPWClockInterfaceAdminTx
+ EnableDisableSMI2,
+ genEquipInterfacesNGPWClockInterfaceExportClkFrontPannel
+ INTEGER,
+ genEquipInterfacesNGPWClockInterfaceExportClkFrontPanelCrPort
+ INTEGER,
+ genEquipInterfacesNGPWClockInterfaceFrontPanelClockSignalInput
+ PWfpClockSignal,
+ genEquipInterfacesNGPWClockInterfaceFrontPanelClockSignalOutput
+ PWfpClockSignal,
+ genEquipInterfacesNGPWClockInterfaceSSMAdmin
+ EnableDisableSMI2,
+ genEquipInterfacesNGPWClockInterfaceSSMBit
+ INTEGER,
+ genEquipInterfacesNGPWClockInterfaceSSMTxDefault
+ INTEGER
+}
+
+
+genEquipInterfacesNGPWClockInterfaceSlotID OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Slot where PW-LIC is inserted."
+::= { genEquipInterfacesNGPWClockInterfaceEntry 1 }
+
+genEquipInterfacesNGPWClockInterfaceIfIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Interface IfIndex."
+::= { genEquipInterfacesNGPWClockInterfaceEntry 2 }
+
+genEquipInterfacesNGPWClockInterfaceAdminRx OBJECT-TYPE
+ SYNTAX EnableDisableSMI2
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Clock interface administrative state."
+::= { genEquipInterfacesNGPWClockInterfaceEntry 3 }
+
+genEquipInterfacesNGPWClockInterfaceAdminTx OBJECT-TYPE
+ SYNTAX EnableDisableSMI2
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Clock interface administrative state."
+::= { genEquipInterfacesNGPWClockInterfaceEntry 4 }
+
+genEquipInterfacesNGPWClockInterfaceExportClkFrontPannel OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0),
+ sysRef(1),
+ clockRecovery(2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Configures which signal the PW-LIC exports to the front panel clock interface."
+::= { genEquipInterfacesNGPWClockInterfaceEntry 5 }
+
+genEquipInterfacesNGPWClockInterfaceExportClkFrontPanelCrPort OBJECT-TYPE
+ SYNTAX INTEGER (0..16)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "TDM port serving as clock recovery reference for front panel interface."
+::= { genEquipInterfacesNGPWClockInterfaceEntry 6 }
+
+genEquipInterfacesNGPWClockInterfaceFrontPanelClockSignalInput OBJECT-TYPE
+ SYNTAX PWfpClockSignal
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Expected input signal type: E1 or differential sine/square 3.3V 2MHz"
+::= { genEquipInterfacesNGPWClockInterfaceEntry 7 }
+
+genEquipInterfacesNGPWClockInterfaceFrontPanelClockSignalOutput OBJECT-TYPE
+ SYNTAX PWfpClockSignal
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Output signal type: E1 or differential sine/square 3.3V 2MH."
+::= { genEquipInterfacesNGPWClockInterfaceEntry 8 }
+
+genEquipInterfacesNGPWClockInterfaceSSMAdmin OBJECT-TYPE
+ SYNTAX EnableDisableSMI2
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Enable/disable SSM sending in this interface."
+::= { genEquipInterfacesNGPWClockInterfaceEntry 9 }
+
+genEquipInterfacesNGPWClockInterfaceSSMBit OBJECT-TYPE
+ SYNTAX INTEGER (4..8)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Determines which bit in the frame."
+::= { genEquipInterfacesNGPWClockInterfaceEntry 10 }
+
+genEquipInterfacesNGPWClockInterfaceSSMTxDefault OBJECT-TYPE
+ SYNTAX INTEGER (0..63)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "..."
+::= { genEquipInterfacesNGPWClockInterfaceEntry 11 }
+
+
+-- pw-clock-interface-status-table
+genEquipInterfacesNGPWClockInterfaceStatusTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipInterfacesNGPWClockInterfaceStatusEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table contains information about current state of the clock interface in the PW-LIC."
+ ::= { genEquipInterfacesNGPW 4 }
+
+genEquipInterfacesNGPWClockInterfaceStatusEntry OBJECT-TYPE
+ SYNTAX GenEquipInterfacesNGPWClockInterfaceStatusEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table entry contains information about current state of the clock interface in the PW-LIC."
+ INDEX { genEquipInterfacesNGPWClockInterfaceStatusSlotID }
+ ::= { genEquipInterfacesNGPWClockInterfaceStatusTable 1 }
+
+GenEquipInterfacesNGPWClockInterfaceStatusEntry ::=
+ SEQUENCE {
+ genEquipInterfacesNGPWClockInterfaceStatusSlotID
+ INTEGER,
+ genEquipInterfacesNGPWClockInterfaceStatusIfIndex
+ INTEGER,
+ genEquipInterfacesNGPWClockInterfaceStatusOperationalState
+ DownUp,
+ genEquipInterfacesNGPWClockInterfaceStatusSSMTx
+ INTEGER,
+ genEquipInterfacesNGPWClockInterfaceStatusSSMRx
+ INTEGER
+}
+
+
+genEquipInterfacesNGPWClockInterfaceStatusSlotID OBJECT-TYPE
+ SYNTAX INTEGER (2..12)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Slot where PW-LIC is inserted."
+::= { genEquipInterfacesNGPWClockInterfaceStatusEntry 1 }
+
+genEquipInterfacesNGPWClockInterfaceStatusIfIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Interface IfIndex."
+::= { genEquipInterfacesNGPWClockInterfaceStatusEntry 2 }
+
+genEquipInterfacesNGPWClockInterfaceStatusOperationalState OBJECT-TYPE
+ SYNTAX DownUp
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Clock interface operational state."
+::= { genEquipInterfacesNGPWClockInterfaceStatusEntry 3 }
+
+genEquipInterfacesNGPWClockInterfaceStatusSSMTx OBJECT-TYPE
+ SYNTAX INTEGER (0..63)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Currently transmitted SSM bits."
+::= { genEquipInterfacesNGPWClockInterfaceStatusEntry 4 }
+
+genEquipInterfacesNGPWClockInterfaceStatusSSMRx OBJECT-TYPE
+ SYNTAX INTEGER (0..63)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Currently received SSM bits."
+::= { genEquipInterfacesNGPWClockInterfaceStatusEntry 5 }
+
+
+-- pw-eth-port-configuration-table
+genEquipInterfacesNGPWEthInterfaceTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipInterfacesNGPWEthInterfaceEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table allows enabling/disabling the PW-LIC internal Ethernet port."
+ ::= { genEquipInterfacesNGPW 5 }
+
+genEquipInterfacesNGPWEthInterfaceEntry OBJECT-TYPE
+ SYNTAX GenEquipInterfacesNGPWEthInterfaceEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table allows enabling/disabling the PW-LIC internal Ethernet port."
+ INDEX { genEquipInterfacesNGPWEthInterfaceSlotID }
+ ::= { genEquipInterfacesNGPWEthInterfaceTable 1 }
+
+GenEquipInterfacesNGPWEthInterfaceEntry ::=
+ SEQUENCE {
+ genEquipInterfacesNGPWEthInterfaceSlotID
+ INTEGER,
+ genEquipInterfacesNGPWEthInterfaceIfIndex
+ INTEGER
+}
+
+
+genEquipInterfacesNGPWEthInterfaceSlotID OBJECT-TYPE
+ SYNTAX INTEGER (2..12)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Slot where PW-LIC is inserted."
+::= { genEquipInterfacesNGPWEthInterfaceEntry 1 }
+
+genEquipInterfacesNGPWEthInterfaceIfIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Interface IfIndex."
+::= { genEquipInterfacesNGPWEthInterfaceEntry 2 }
+
+
+-- pw-eth-port-status-table
+genEquipInterfacesNGPWEthInterfaceStatusTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipInterfacesNGPWEthInterfaceStatusEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table contains status and RMON statistics of the internal PW-LIC Ethernet port."
+ ::= { genEquipInterfacesNGPW 6 }
+
+genEquipInterfacesNGPWEthInterfaceStatusEntry OBJECT-TYPE
+ SYNTAX GenEquipInterfacesNGPWEthInterfaceStatusEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table enatry contains status and RMON statistics of the internal PW-LIC Ethernet port."
+ INDEX { genEquipInterfacesNGPWEthInterfaceStatusIfIndex }
+ ::= { genEquipInterfacesNGPWEthInterfaceStatusTable 1 }
+
+GenEquipInterfacesNGPWEthInterfaceStatusEntry ::=
+ SEQUENCE {
+ genEquipInterfacesNGPWEthInterfaceStatusIfIndex
+ INTEGER,
+ genEquipInterfacesNGPWEthInterfaceStatusMACAddress
+ OCTET STRING,
+ genEquipInterfacesNGPWEthInterfaceStatusClearStats
+ NoYes,
+ genEquipInterfacesNGPWEthInterfaceStatusTxRxFrames64
+ Counter64,
+ genEquipInterfacesNGPWEthInterfaceStatusTxRxFrames127
+ Counter64,
+ genEquipInterfacesNGPWEthInterfaceStatusTxRxFrames255
+ Counter64,
+ genEquipInterfacesNGPWEthInterfaceStatusTxRxFrames511
+ Counter64,
+ genEquipInterfacesNGPWEthInterfaceStatusTxRxFrames1023
+ Counter64,
+ genEquipInterfacesNGPWEthInterfaceStatusTxRxFrames1518
+ Counter64,
+ genEquipInterfacesNGPWEthInterfaceStatusTxRxFrames1522
+ Counter64,
+ genEquipInterfacesNGPWEthInterfaceStatusRxBytes
+ Counter64,
+ genEquipInterfacesNGPWEthInterfaceStatusRxPackets
+ Counter64,
+ genEquipInterfacesNGPWEthInterfaceStatusRxErrFcs
+ Counter64,
+ genEquipInterfacesNGPWEthInterfaceStatusRxMulticast
+ Counter64,
+ genEquipInterfacesNGPWEthInterfaceStatusRxBroadcast
+ Counter64,
+ genEquipInterfacesNGPWEthInterfaceStatusRxMacControl
+ Counter64,
+ genEquipInterfacesNGPWEthInterfaceStatusRxMacPause
+ Counter64,
+ genEquipInterfacesNGPWEthInterfaceStatusRxMacUnknown
+ Counter64,
+ genEquipInterfacesNGPWEthInterfaceStatusRxErrCode
+ Counter64,
+ genEquipInterfacesNGPWEthInterfaceStatusRxErrFalseCarrier
+ Counter64,
+ genEquipInterfacesNGPWEthInterfaceStatusRxUndersize
+ Counter64,
+ genEquipInterfacesNGPWEthInterfaceStatusRxOversize
+ Counter64,
+ genEquipInterfacesNGPWEthInterfaceStatusRxFragments
+ Counter64,
+ genEquipInterfacesNGPWEthInterfaceStatusRxJabber
+ Counter64,
+ genEquipInterfacesNGPWEthInterfaceStatusRxDropped
+ Counter64,
+ genEquipInterfacesNGPWEthInterfaceStatusTxBytes
+ Counter64,
+ genEquipInterfacesNGPWEthInterfaceStatusTxPackets
+ Counter64,
+ genEquipInterfacesNGPWEthInterfaceStatusTxMulticast
+ Counter64,
+ genEquipInterfacesNGPWEthInterfaceStatusTxBroadcast
+ Counter64,
+ genEquipInterfacesNGPWEthInterfaceStatusTxMacPause
+ Counter64,
+ genEquipInterfacesNGPWEthInterfaceStatusTxDefer
+ Counter64,
+ genEquipInterfacesNGPWEthInterfaceStatusTxExcessDefer
+ Counter64,
+ genEquipInterfacesNGPWEthInterfaceStatusTxSingleCollision
+ Counter64,
+ genEquipInterfacesNGPWEthInterfaceStatusTxMultiCollision
+ Counter64,
+ genEquipInterfacesNGPWEthInterfaceStatusTxLateCollision
+ Counter64,
+ genEquipInterfacesNGPWEthInterfaceStatusTxExcessCollision
+ Counter64,
+ genEquipInterfacesNGPWEthInterfaceStatusTxNoCollision
+ Counter64,
+ genEquipInterfacesNGPWEthInterfaceStatusTxMacPauseHonored
+ Counter64,
+ genEquipInterfacesNGPWEthInterfaceStatusTxDropped
+ Counter64,
+ genEquipInterfacesNGPWEthInterfaceStatusTxJabber
+ Counter64,
+ genEquipInterfacesNGPWEthInterfaceStatusTxErrFcs
+ Counter64,
+ genEquipInterfacesNGPWEthInterfaceStatusTxControl
+ Counter64,
+ genEquipInterfacesNGPWEthInterfaceStatusTxOversize
+ Counter64,
+ genEquipInterfacesNGPWEthInterfaceStatusTxUndersize
+ Counter64,
+ genEquipInterfacesNGPWEthInterfaceStatusTxFragments
+ Counter64,
+ genEquipInterfacesNGPWEthInterfaceStatusRxIwFrames
+ Counter64,
+ genEquipInterfacesNGPWEthInterfaceStatusRxErrFbpUnderrun
+ Counter64,
+ genEquipInterfacesNGPWEthInterfaceStatusRxErrNonvalidMac
+ Counter64,
+ genEquipInterfacesNGPWEthInterfaceStatusRxErrMru
+ Counter64,
+ genEquipInterfacesNGPWEthInterfaceStatusRxErrSdu
+ Counter64,
+ genEquipInterfacesNGPWEthInterfaceStatusTxErrUnderrun
+ Counter64,
+ genEquipInterfacesNGPWEthInterfaceStatusRxErrOverrun
+ Counter64,
+ genEquipInterfacesNGPWEthInterfaceStatusSlotID
+ INTEGER
+}
+
+
+genEquipInterfacesNGPWEthInterfaceStatusIfIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Interface IfIndex."
+::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 2 }
+
+genEquipInterfacesNGPWEthInterfaceStatusMACAddress OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(6))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "MAC Address to be used in Ethernet and UDP/IP PSN packets"
+::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 3 }
+
+genEquipInterfacesNGPWEthInterfaceStatusClearStats OBJECT-TYPE
+ SYNTAX NoYes
+ ACCESS write-only
+ STATUS mandatory
+ DESCRIPTION
+ "Clears internal Ethernet port RMON counters"
+::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 4 }
+
+genEquipInterfacesNGPWEthInterfaceStatusTxRxFrames64 OBJECT-TYPE
+ SYNTAX Counter64
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Unsigned 64-bit modulo counter of good or bad frames transmitted and received that are 64 bytes in length inclusive"
+::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 5 }
+
+genEquipInterfacesNGPWEthInterfaceStatusTxRxFrames127 OBJECT-TYPE
+ SYNTAX Counter64
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Unsigned 64-bit modulo counter of good or bad frames transmitted and received that are 65 to 127 bytes in length inclusive."
+::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 6 }
+
+genEquipInterfacesNGPWEthInterfaceStatusTxRxFrames255 OBJECT-TYPE
+ SYNTAX Counter64
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Unsigned 64-bit modulo counter of good or bad frames transmitted and received that are 128 to 255 bytes in length inclusive."
+::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 7 }
+
+genEquipInterfacesNGPWEthInterfaceStatusTxRxFrames511 OBJECT-TYPE
+ SYNTAX Counter64
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Unsigned 64-bit modulo counter of good or bad frames transmitted and received that are 256 to 511 bytes in length inclusive."
+::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 8 }
+
+genEquipInterfacesNGPWEthInterfaceStatusTxRxFrames1023 OBJECT-TYPE
+ SYNTAX Counter64
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Unsigned 64-bit modulo counter of good or bad frames transmitted and received that are 512 to 1023 bytes in length inclusive."
+::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 9 }
+
+genEquipInterfacesNGPWEthInterfaceStatusTxRxFrames1518 OBJECT-TYPE
+ SYNTAX Counter64
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Unsigned 64-bit modulo counter of good or bad frames transmitted and received that are 1024 to 1518 bytes in length inclusive."
+::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 10 }
+
+genEquipInterfacesNGPWEthInterfaceStatusTxRxFrames1522 OBJECT-TYPE
+ SYNTAX Counter64
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Unsigned 64-bit modulo counter of good or bad frames transmitted and received that are 1519 to 1522 bytes in length inclusive."
+::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 11 }
+
+genEquipInterfacesNGPWEthInterfaceStatusRxBytes OBJECT-TYPE
+ SYNTAX Counter64
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Unsigned 64-bit modulo counter of byte count of frames received with 0 to 1518 bytes, including those in bad packets."
+::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 12 }
+
+genEquipInterfacesNGPWEthInterfaceStatusRxPackets OBJECT-TYPE
+ SYNTAX Counter64
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Unsigned 64-bit modulo counter of number of received packets (including bad packets, all Unicast, Broadcast, and Multicast packets)."
+::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 13 }
+
+genEquipInterfacesNGPWEthInterfaceStatusRxErrFcs OBJECT-TYPE
+ SYNTAX Counter64
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Unsigned 64-bit modulo counter of frames received that have a integral 64 to 1518 byte length and contain a Frame Check Sequence error.."
+::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 14 }
+
+genEquipInterfacesNGPWEthInterfaceStatusRxMulticast OBJECT-TYPE
+ SYNTAX Counter64
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Unsigned 64-bit modulo counter of number of multicast good frames of length 64 to1518 (non VLAN) or 1522 (VLAN) bytes excluding Broadcast frames."
+::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 15 }
+
+genEquipInterfacesNGPWEthInterfaceStatusRxBroadcast OBJECT-TYPE
+ SYNTAX Counter64
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Unsigned 64-bit modulo counter of number of broadcast good frames of length 64 to1518 (non VLAN) or 1522 (VLAN) bytes excluding Broadcast frames."
+::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 16 }
+
+genEquipInterfacesNGPWEthInterfaceStatusRxMacControl OBJECT-TYPE
+ SYNTAX Counter64
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Unsigned 64-bit modulo counter of MAC Control frames received (PAUSE &amp;Unsupported)."
+::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 17 }
+
+genEquipInterfacesNGPWEthInterfaceStatusRxMacPause OBJECT-TYPE
+ SYNTAX Counter64
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Unsigned 64-bit modulo counter of valid PAUSE MAC Control frames received."
+::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 18 }
+
+genEquipInterfacesNGPWEthInterfaceStatusRxMacUnknown OBJECT-TYPE
+ SYNTAX Counter64
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Unsigned 64-bit modulo counter of MAC Control Frames received that contain an opcode other than a PAUSE."
+::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 19 }
+
+genEquipInterfacesNGPWEthInterfaceStatusRxErrCode OBJECT-TYPE
+ SYNTAX Counter64
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Unsigned 64-bit modulo counter of number of instances where a valid carrier was present and at least one invalid data symbol was detected."
+::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 20 }
+
+genEquipInterfacesNGPWEthInterfaceStatusRxErrFalseCarrier OBJECT-TYPE
+ SYNTAX Counter64
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Unsigned 64-bit modulo counter of number of false carriers detected during idle, as defined by a 1 on RX_ER and an '0xE' on RXD."
+::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 21 }
+
+genEquipInterfacesNGPWEthInterfaceStatusRxUndersize OBJECT-TYPE
+ SYNTAX Counter64
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Unsigned 64-bit modulo counter of frames received that are less than 64 bytes in length, contain a valid FCS, and were otherwise well formed."
+::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 22 }
+
+genEquipInterfacesNGPWEthInterfaceStatusRxOversize OBJECT-TYPE
+ SYNTAX Counter64
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Unsigned 64-bit modulo counter of frames received that exceeded maximum bytes in length, contain a valid FCS, and were otherwise well formed."
+::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 23 }
+
+genEquipInterfacesNGPWEthInterfaceStatusRxFragments OBJECT-TYPE
+ SYNTAX Counter64
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Unsigned 64-bit modulo counter of frames received which are less than 64 bytes in length and contain an invalid FCS."
+::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 24 }
+
+genEquipInterfacesNGPWEthInterfaceStatusRxJabber OBJECT-TYPE
+ SYNTAX Counter64
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Unsigned 64-bit modulo counter of frames received which exceed maximum length and contain an invalid FCS, including alignment errors."
+::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 25 }
+
+genEquipInterfacesNGPWEthInterfaceStatusRxDropped OBJECT-TYPE
+ SYNTAX Counter64
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Unsigned 64-bit modulo counter of frames received that are streamed to the system but are later dropped due to lack of system resources."
+::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 26 }
+
+genEquipInterfacesNGPWEthInterfaceStatusTxBytes OBJECT-TYPE
+ SYNTAX Counter64
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Unsigned 64-bit modulo counter of number of bytes that were put on the wire including fragments of frames that were involved with collisions."
+::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 27 }
+
+genEquipInterfacesNGPWEthInterfaceStatusTxPackets OBJECT-TYPE
+ SYNTAX Counter64
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Unsigned 64-bit modulo counter of transmitted packets."
+::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 28 }
+
+genEquipInterfacesNGPWEthInterfaceStatusTxMulticast OBJECT-TYPE
+ SYNTAX Counter64
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Unsigned 64-bit modulo counter of Multicast valid frames transmitted (excluding Broadcast frames)."
+::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 29 }
+
+genEquipInterfacesNGPWEthInterfaceStatusTxBroadcast OBJECT-TYPE
+ SYNTAX Counter64
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Unsigned 64-bit modulo counter of Broadcast frames transmitted (excluding Multicast frames)."
+::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 30 }
+
+genEquipInterfacesNGPWEthInterfaceStatusTxMacPause OBJECT-TYPE
+ SYNTAX Counter64
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Unsigned 64-bit modulo counter of valid PAUSE MAC Control frames transmitted."
+::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 31 }
+
+genEquipInterfacesNGPWEthInterfaceStatusTxDefer OBJECT-TYPE
+ SYNTAX Counter64
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Unsigned 64-bit modulo counter of frames that were deferred upon first transmission attempt. Does not include frames involved in collisions.."
+::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 32 }
+
+genEquipInterfacesNGPWEthInterfaceStatusTxExcessDefer OBJECT-TYPE
+ SYNTAX Counter64
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Unsigned 64-bit modulo counter of number of frames aborted that were deferred for an excessive period of time (3036 byte times)."
+::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 33 }
+
+genEquipInterfacesNGPWEthInterfaceStatusTxSingleCollision OBJECT-TYPE
+ SYNTAX Counter64
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Unsigned 64-bit modulo counter of frames transmitted which experienced exactly one collision during transmission."
+::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 34 }
+
+genEquipInterfacesNGPWEthInterfaceStatusTxMultiCollision OBJECT-TYPE
+ SYNTAX Counter64
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Unsigned 64-bit modulo counter of frames transmitted which experienced 2-15 collisions."
+::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 35 }
+
+genEquipInterfacesNGPWEthInterfaceStatusTxLateCollision OBJECT-TYPE
+ SYNTAX Counter64
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Unsigned 64-bit modulo counter of frames transmitted that experienced a late collision during a transmission attempt."
+::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 36 }
+
+genEquipInterfacesNGPWEthInterfaceStatusTxExcessCollision OBJECT-TYPE
+ SYNTAX Counter64
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Unsigned 64-bit modulo counter of frames that experienced 16 collisions during transmission and were aborted."
+::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 37 }
+
+genEquipInterfacesNGPWEthInterfaceStatusTxNoCollision OBJECT-TYPE
+ SYNTAX Counter64
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Unsigned 64-bit modulo counter of number of frames transmitted that had no collision."
+::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 38 }
+
+genEquipInterfacesNGPWEthInterfaceStatusTxMacPauseHonored OBJECT-TYPE
+ SYNTAX Counter64
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Unsigned 64-bit modulo counter of number of times a valid PAUSE MAC Control frame was transmitted and honored."
+::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 39 }
+
+genEquipInterfacesNGPWEthInterfaceStatusTxDropped OBJECT-TYPE
+ SYNTAX Counter64
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Unsigned 64-bit modulo counter of number of times the input PFH is asserted."
+::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 40 }
+
+genEquipInterfacesNGPWEthInterfaceStatusTxJabber OBJECT-TYPE
+ SYNTAX Counter64
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Unsigned 64-bit modulo counter of oversized transmitted frames with an incorrect FCS value."
+::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 41 }
+
+genEquipInterfacesNGPWEthInterfaceStatusTxErrFcs OBJECT-TYPE
+ SYNTAX Counter64
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Unsigned 64-bit modulo counter of valid sized packets transmitted with an incorrec tFCS value."
+::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 42 }
+
+genEquipInterfacesNGPWEthInterfaceStatusTxControl OBJECT-TYPE
+ SYNTAX Counter64
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Unsigned 64-bit modulo counter of valid size frames transmitted with a Type Field signifying a Control frame.."
+::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 43 }
+
+genEquipInterfacesNGPWEthInterfaceStatusTxOversize OBJECT-TYPE
+ SYNTAX Counter64
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Unsigned 64-bit modulo counter of oversized transmitted frames with a correct."
+::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 44 }
+
+genEquipInterfacesNGPWEthInterfaceStatusTxUndersize OBJECT-TYPE
+ SYNTAX Counter64
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Unsigned 64-bit modulo counter of transmitted frames less then 64 bytes, with a correctFCS value."
+::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 45 }
+
+genEquipInterfacesNGPWEthInterfaceStatusTxFragments OBJECT-TYPE
+ SYNTAX Counter64
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Unsigned 64-bit modulo counter of transmitted frames less then 64 bytes, with an incorrect FCS value."
+::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 46 }
+
+genEquipInterfacesNGPWEthInterfaceStatusRxIwFrames OBJECT-TYPE
+ SYNTAX Counter64
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Unsigned 64-bit modulo counter of the number of received Ethernet Interworking frames that were received and sent to the L3 Interworking module."
+::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 47 }
+
+genEquipInterfacesNGPWEthInterfaceStatusRxErrFbpUnderrun OBJECT-TYPE
+ SYNTAX Counter64
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Unsigned 64-bit modulo counter of the number of received Ethernet Interworking frames which were dropped due free buffer pool (FBP) Overrun."
+::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 48 }
+
+genEquipInterfacesNGPWEthInterfaceStatusRxErrNonvalidMac OBJECT-TYPE
+ SYNTAX Counter64
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Unsigned 64-bit modulo counter of the number of received Ethernet frames whose MAC-DA is not valid."
+::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 49 }
+
+genEquipInterfacesNGPWEthInterfaceStatusRxErrMru OBJECT-TYPE
+ SYNTAX Counter64
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Unsigned 64-bit modulo counter of the number of received Ethernet Interworking frames which were dropped due the Maximum Receive Unit."
+::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 50 }
+
+genEquipInterfacesNGPWEthInterfaceStatusRxErrSdu OBJECT-TYPE
+ SYNTAX Counter64
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Unsigned 64-bit modulo counter of the number of Ethernet frames which were closed due the maximum frame size has been exceeded."
+::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 51 }
+
+genEquipInterfacesNGPWEthInterfaceStatusTxErrUnderrun OBJECT-TYPE
+ SYNTAX Counter64
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Unsigned 64-bit modulo counter of number of times Ethernet transmitter underun occurred."
+::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 52 }
+
+genEquipInterfacesNGPWEthInterfaceStatusRxErrOverrun OBJECT-TYPE
+ SYNTAX Counter64
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Unsigned 64-bit modulo counter of number of received Ethernet frames which were closed or discarded due to a receive buffer overrun event."
+::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 53 }
+
+genEquipInterfacesNGPWEthInterfaceStatusSlotID OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Slot where PW-LIC is inserted"
+::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 54 }
+
+
+--
+-- PW-LIC card staus table - pw-card-status-table
+--
+genEquipInterfacesNGPWCardStatusTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipInterfacesNGPWCardStatusEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table contains information about PW-LIC card level status."
+ ::= { genEquipInterfacesNGPW 7 }
+
+genEquipInterfacesNGPWCardStatusEntry OBJECT-TYPE
+ SYNTAX GenEquipInterfacesNGPWCardStatusEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table contains information about PW-LIC card level status."
+ INDEX { genEquipInterfacesNGPWCardStatusSlotID }
+ ::= { genEquipInterfacesNGPWCardStatusTable 1 }
+
+GenEquipInterfacesNGPWCardStatusEntry ::=
+ SEQUENCE {
+ genEquipInterfacesNGPWCardStatusSlotID
+ INTEGER,
+ genEquipInterfacesNGPWCardStatusSWVersion
+ DisplayString
+}
+
+genEquipInterfacesNGPWCardStatusSlotID OBJECT-TYPE
+ SYNTAX INTEGER (2..12)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Slot where PW-LIC is inserted."
+::= { genEquipInterfacesNGPWCardStatusEntry 1 }
+
+genEquipInterfacesNGPWCardStatusSWVersion OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Bundle ID."
+::= { genEquipInterfacesNGPWCardStatusEntry 2 }
+
+
+
+-- Switch Application Branch
+genEquipInterfacesCet OBJECT IDENTIFIER ::= {genEquipInterfaces 8}
+
+genEquipInterfacesCetGeneral OBJECT IDENTIFIER ::= {genEquipInterfacesCet 1}
+
+genEquipInterfacesCetMru OBJECT-TYPE
+ SYNTAX INTEGER (64..9612)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Maximum Frame Size."
+::= { genEquipInterfacesCetGeneral 1 }
+
+--
+-- Switch Application if-physical-configuration-table
+--
+
+genEquipInterfacesCetPhyConfigTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipInterfacesCetPhyConfigEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Ethernet physical port configuration table."
+ ::= { genEquipInterfacesCet 2 }
+
+genEquipInterfacesCetPhyConfigEntry OBJECT-TYPE
+ SYNTAX GenEquipInterfacesCetPhyConfigEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Ethernet physical port configuration table entry."
+ INDEX { genEquipInterfacesCetPhyConfigIfIndex }
+ ::= { genEquipInterfacesCetPhyConfigTable 1 }
+
+GenEquipInterfacesCetPhyConfigEntry ::=
+ SEQUENCE {
+ genEquipInterfacesCetPhyConfigIfIndex
+ INTEGER,
+ genEquipInterfacesCetPhyConfigDescription
+ DisplayString,
+ genEquipInterfacesCetPhyConfigMediaType
+ MediaType,
+ genEquipInterfacesCetPhyConfigAdmin
+ EnableDisable,
+ genEquipInterfacesCetPhyConfigAutoNegotiation
+ AutoNegMode,
+ genEquipInterfacesCetPhyConfigSpeed
+ SpeedDefs,
+ genEquipInterfacesCetPhyConfigDuplex
+ HalfFull,
+ genEquipInterfacesCetPhyConfigMasterSlave
+ MasterSalveSetMode,
+-- genEquipInterfacesCetPhyConfigFlowControl
+-- FlowControl,
+ genEquipInterfacesCetPhyConfigIfg
+ INTEGER,
+ genEquipInterfacesCetPhyConfigPreamble
+ INTEGER,
+ genEquipInterfacesCetPhyConfigMacAddress
+ OCTET STRING,
+ genEquipInterfacesCetPhyConfigType
+ PortType,
+ genEquipInterfacesCetPhyConfigPortPmAdmin
+ EnableDisable,
+ genEquipInterfacesCetPhyConfigPortPmRxBytesThreshold
+ INTEGER,
+ genEquipInterfacesCetPhyConfigPortPmTxBytesThreshold
+ INTEGER
+}
+
+
+genEquipInterfacesCetPhyConfigIfIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Ethernet physical port if-index table key."
+::= { genEquipInterfacesCetPhyConfigEntry 1 }
+
+genEquipInterfacesCetPhyConfigDescription OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Setting Ethernet physical port user description."
+::= { genEquipInterfacesCetPhyConfigEntry 2 }
+
+genEquipInterfacesCetPhyConfigMediaType OBJECT-TYPE
+ SYNTAX MediaType
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Setting Ethernet physical port media type."
+::= { genEquipInterfacesCetPhyConfigEntry 3 }
+
+genEquipInterfacesCetPhyConfigAdmin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Setting Ethernet physical port administration."
+::= { genEquipInterfacesCetPhyConfigEntry 4 }
+
+genEquipInterfacesCetPhyConfigAutoNegotiation OBJECT-TYPE
+ SYNTAX AutoNegMode
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Setting Ethernet physical port auto negotiation state."
+::= { genEquipInterfacesCetPhyConfigEntry 5 }
+
+genEquipInterfacesCetPhyConfigSpeed OBJECT-TYPE
+ SYNTAX SpeedDefs
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Setting Ethernet physical maximum port speed Affects Auto Neg Capability Advertised Bits."
+::= { genEquipInterfacesCetPhyConfigEntry 6 }
+
+genEquipInterfacesCetPhyConfigDuplex OBJECT-TYPE
+ SYNTAX HalfFull
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Setting Ethernet physical port duplex Affects Auto Neg Capability Advertised Bits."
+::= { genEquipInterfacesCetPhyConfigEntry 7 }
+
+genEquipInterfacesCetPhyConfigMasterSlave OBJECT-TYPE
+ SYNTAX MasterSalveSetMode
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Setting Ethernet physical port master slave for 1000BaseT Affects Auto Neg
+ Capability Advertised Bits."
+::= { genEquipInterfacesCetPhyConfigEntry 8 }
+
+--genEquipInterfacesCetPhyConfigFlowControl OBJECT-TYPE
+-- SYNTAX FlowControl
+-- ACCESS read-write
+-- STATUS mandatory
+-- DESCRIPTION
+-- "Setting Ethernet physical port flow-control Affects Auto Neg Capability Advertised Bits"
+--::= { genEquipInterfacesCetPhyConfigEntry 9 }
+
+genEquipInterfacesCetPhyConfigIfg OBJECT-TYPE
+ SYNTAX INTEGER (6..15)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Inter Frame GAP value in bytes."
+::= { genEquipInterfacesCetPhyConfigEntry 10 }
+
+genEquipInterfacesCetPhyConfigPreamble OBJECT-TYPE
+ SYNTAX INTEGER (6..15)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "port preamble value in bytes."
+::= { genEquipInterfacesCetPhyConfigEntry 11 }
+
+genEquipInterfacesCetPhyConfigMacAddress OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Ethernet physical port mac-address."
+::= { genEquipInterfacesCetPhyConfigEntry 12 }
+
+genEquipInterfacesCetPhyConfigType OBJECT-TYPE
+ SYNTAX PortType
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Setting Ethernet physical port type."
+::= { genEquipInterfacesCetPhyConfigEntry 13 }
+
+genEquipInterfacesCetPhyConfigPortPmAdmin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Enable/Disable PMs on port level."
+::= { genEquipInterfacesCetPhyConfigEntry 14 }
+
+genEquipInterfacesCetPhyConfigPortPmRxBytesThreshold OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Threshold of received bytes PM."
+::= { genEquipInterfacesCetPhyConfigEntry 15 }
+
+genEquipInterfacesCetPhyConfigPortPmTxBytesThreshold OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Threshold of transmitted bytes PM."
+::= { genEquipInterfacesCetPhyConfigEntry 16 }
+
+
+--
+-- Interfaces Switch Application Physical Port Status Table
+-- if-physical-status-table
+--
+
+genEquipInterfacesCetPhyStatusTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipInterfacesCetPhyStatusEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Ethernet physical port configuration table."
+ ::= { genEquipInterfacesCet 3 }
+
+genEquipInterfacesCetPhyStatusEntry OBJECT-TYPE
+ SYNTAX GenEquipInterfacesCetPhyStatusEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table allows configuration of the 16 internal E1/DS1 ports."
+ INDEX { genEquipInterfacesCetPhyStatusIfIndex }
+ ::= { genEquipInterfacesCetPhyStatusTable 1 }
+
+GenEquipInterfacesCetPhyStatusEntry ::=
+ SEQUENCE {
+ genEquipInterfacesCetPhyStatusIfIndex
+ INTEGER,
+ genEquipInterfacesCetPhyStatusMediaType
+ MediaType,
+ genEquipInterfacesCetPhyStatusOperationalStatus
+ DownUp,
+ genEquipInterfacesCetPhystatusAutoNegotiation
+ AutoNegMode,
+ genEquipInterfacesCetPhyStatusSpeed
+ SpeedDefs,
+ genEquipInterfacesCetPhyStatusDuplex
+ HalfFull,
+ genEquipInterfacesCetPhyStatusMasterSlave
+ MasterSalveSetMode
+}
+
+
+genEquipInterfacesCetPhyStatusIfIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Ethernet physical port if-index table key."
+::= { genEquipInterfacesCetPhyStatusEntry 1 }
+
+genEquipInterfacesCetPhyStatusMediaType OBJECT-TYPE
+ SYNTAX MediaType
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Setting Ethernet physical port media type."
+::= { genEquipInterfacesCetPhyStatusEntry 2 }
+
+genEquipInterfacesCetPhyStatusOperationalStatus OBJECT-TYPE
+ SYNTAX DownUp
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Ethernet physical port operational-status."
+::= { genEquipInterfacesCetPhyStatusEntry 3 }
+
+genEquipInterfacesCetPhystatusAutoNegotiation OBJECT-TYPE
+ SYNTAX AutoNegMode
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Ethernet physical port auto negotiation status."
+::= { genEquipInterfacesCetPhyStatusEntry 4 }
+
+genEquipInterfacesCetPhyStatusSpeed OBJECT-TYPE
+ SYNTAX SpeedDefs
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Actual Ethernet physical port speed."
+::= { genEquipInterfacesCetPhyStatusEntry 5 }
+
+genEquipInterfacesCetPhyStatusDuplex OBJECT-TYPE
+ SYNTAX HalfFull
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Actual Ethernet physical port duplex."
+::= { genEquipInterfacesCetPhyStatusEntry 6 }
+
+genEquipInterfacesCetPhyStatusMasterSlave OBJECT-TYPE
+ SYNTAX MasterSalveSetMode
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Actual Ethernet physical port master slave for 1000BaseT."
+::= { genEquipInterfacesCetPhyStatusEntry 7 }
+
+--
+-- Switch Application if-logical-configuration-table
+--
+
+genEquipInterfacesCetLogicConfigTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipInterfacesCetLogicConfigEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "The table holds the ingress logical port configuration (it is the same point of view for
+ single interface or group of ports) ."
+ ::= { genEquipInterfacesCet 4 }
+
+genEquipInterfacesCetLogicConfigEntry OBJECT-TYPE
+ SYNTAX GenEquipInterfacesCetLogicConfigEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "The table entry holds the ingress logical port configuration (it is the same point of
+ view for single interface or group of ports)."
+ INDEX { genEquipInterfacesCetLogicConfigIfIndex }
+ ::= { genEquipInterfacesCetLogicConfigTable 1 }
+
+GenEquipInterfacesCetLogicConfigEntry ::=
+ SEQUENCE {
+ genEquipInterfacesCetLogicConfigIfIndex
+ INTEGER,
+ genEquipInterfacesCetLogicConfigTrafficFlow
+ EnableDisable,
+ genEquipInterfacesCetLogicConfigEdgePort
+ EdgePortType,
+ genEquipInterfacesCetLogicConfigIngressTcamClassification
+ INTEGER,
+ genEquipInterfacesCetLogicConfigDefaultVlanTag
+ INTEGER,
+ genEquipInterfacesCetLogicConfigInLineCompensation
+ INTEGER,
+ genEquipInterfacesCetLogicConfigOutLineCompensation
+ INTEGER,
+ genEquipInterfacesCetLogicConfigPclId
+ INTEGER,
+ genEquipInterfacesCetLogicConfigDefCos
+ INTEGER,
+ genEquipInterfacesCetLogicConfigVlanUpToCosTrustMode
+ TrustMode,
+ genEquipInterfacesCetLogicConfigDscpToCosTrustMode
+ TrustMode,
+ genEquipInterfacesCetLogicConfigMplsExpToCosTrustMode
+ TrustMode,
+ genEquipInterfacesCetLogicConfigMacAddress
+ OCTET STRING,
+ genEquipInterfacesCetLogicConfigLoopbackSwapMacAddressAdmin
+ EnableDisable,
+ genEquipInterfacesCetLogicConfigLoopbackAdmin
+ EnableDisable,
+ genEquipInterfacesCetLogicConfigLoopbackDuration
+ INTEGER
+}
+
+
+genEquipInterfacesCetLogicConfigIfIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Ethernet Logical port if-index table key."
+::= { genEquipInterfacesCetLogicConfigEntry 1 }
+
+genEquipInterfacesCetLogicConfigTrafficFlow OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Control the the traffic via logical port which is connected to physical interface
+ (in case of group it control the all interfaces of the group)."
+::= { genEquipInterfacesCetLogicConfigEntry 2 }
+
+genEquipInterfacesCetLogicConfigEdgePort OBJECT-TYPE
+ SYNTAX EdgePortType
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Port Edge Mode (edge / non-edge)."
+::= { genEquipInterfacesCetLogicConfigEntry 3 }
+
+genEquipInterfacesCetLogicConfigIngressTcamClassification OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "ingress-tcam-classification."
+::= { genEquipInterfacesCetLogicConfigEntry 4 }
+
+genEquipInterfacesCetLogicConfigDefaultVlanTag OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Default Network Vlan ID."
+::= { genEquipInterfacesCetLogicConfigEntry 5 }
+
+genEquipInterfacesCetLogicConfigInLineCompensation OBJECT-TYPE
+ SYNTAX INTEGER (0..32)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Ethernet Layer 1 Ingress Byte Compensation."
+::= { genEquipInterfacesCetLogicConfigEntry 6 }
+
+genEquipInterfacesCetLogicConfigOutLineCompensation OBJECT-TYPE
+ SYNTAX INTEGER (0..26)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Ethernet Layer 1 Egress Byte Compensation from the specific logical port."
+::= { genEquipInterfacesCetLogicConfigEntry 7 }
+
+genEquipInterfacesCetLogicConfigPclId OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "...."
+::= { genEquipInterfacesCetLogicConfigEntry 8 }
+
+genEquipInterfacesCetLogicConfigDefCos OBJECT-TYPE
+ SYNTAX INTEGER (0..7)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Port Default CoS."
+::= { genEquipInterfacesCetLogicConfigEntry 9 }
+
+genEquipInterfacesCetLogicConfigVlanUpToCosTrustMode OBJECT-TYPE
+ SYNTAX TrustMode
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Trust VLAN UP bits for classification from the specific logical port."
+::= { genEquipInterfacesCetLogicConfigEntry 10 }
+
+genEquipInterfacesCetLogicConfigDscpToCosTrustMode OBJECT-TYPE
+ SYNTAX TrustMode
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Trust DSCP for classification from the specific logical port."
+::= { genEquipInterfacesCetLogicConfigEntry 11 }
+
+genEquipInterfacesCetLogicConfigMplsExpToCosTrustMode OBJECT-TYPE
+ SYNTAX TrustMode
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Trust MPLS EXP bits for classification from the specific logical port."
+::= { genEquipInterfacesCetLogicConfigEntry 12 }
+
+genEquipInterfacesCetLogicConfigMacAddress OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Ethernet logical port mac-address."
+::= { genEquipInterfacesCetLogicConfigEntry 13 }
+
+genEquipInterfacesCetLogicConfigLoopbackSwapMacAddressAdmin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Swap MAC address for Ethernet port loopback."
+::= { genEquipInterfacesCetLogicConfigEntry 14 }
+
+genEquipInterfacesCetLogicConfigLoopbackAdmin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Ethernet loopback admin."
+::= { genEquipInterfacesCetLogicConfigEntry 15 }
+
+genEquipInterfacesCetLogicConfigLoopbackDuration OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Ethernet loopback duration. Allowed values 1 to 9000 seconds."
+::= { genEquipInterfacesCetLogicConfigEntry 16 }
+
+--
+-- Switch Application if-logical-mgr
+--
+
+genEquipInterfacesCetLogicStatusTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipInterfacesCetLogicStatusEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "The table holds the ingress logical port status
+ (it is the same point of view for single interface or group of ports)."
+ ::= { genEquipInterfacesCet 5 }
+
+genEquipInterfacesCetLogicStatusEntry OBJECT-TYPE
+ SYNTAX GenEquipInterfacesCetLogicStatusEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "The table entry holds the ingress logical port status
+ (it is the same point of view for single interface or group of ports)."
+ INDEX { genEquipInterfacesCetLogicStatusIfIndex }
+ ::= { genEquipInterfacesCetLogicStatusTable 1 }
+
+GenEquipInterfacesCetLogicStatusEntry ::=
+ SEQUENCE {
+ genEquipInterfacesCetLogicStatusIfIndex
+ INTEGER,
+ genEquipInterfacesCetLogicStatusOperationalStatus
+ DownUp
+}
+
+
+genEquipInterfacesCetLogicStatusIfIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Ethernet Logical port if-index table key."
+::= { genEquipInterfacesCetLogicStatusEntry 1 }
+
+genEquipInterfacesCetLogicStatusOperationalStatus OBJECT-TYPE
+ SYNTAX DownUp
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Ethernet logical port operational-status (Up or Down)."
+::= { genEquipInterfacesCetLogicStatusEntry 2 }
+
+
+--
+-- Switch Application if-logical-broadcast_policing-table
+--
+
+genEquipInterfacesCetBcastPolicerAssociationTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipInterfacesCetBcastPolicerAssociationEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Ethernet Port Broadcast configuration table."
+ ::= { genEquipInterfacesCet 6 }
+
+genEquipInterfacesCetBcastPolicerAssociationEntry OBJECT-TYPE
+ SYNTAX GenEquipInterfacesCetBcastPolicerAssociationEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Ethernet Port Broadcast configuration table entry."
+ INDEX { genEquipInterfacesCetBcastPolicerAssociationIfIndex }
+ ::= { genEquipInterfacesCetBcastPolicerAssociationTable 1 }
+
+GenEquipInterfacesCetBcastPolicerAssociationEntry ::=
+ SEQUENCE {
+ genEquipInterfacesCetBcastPolicerAssociationIfIndex
+ INTEGER,
+ genEquipInterfacesCetBcastPolicerAssociationAssociatedProfileId
+ INTEGER,
+ genEquipInterfacesCetBcastPolicerAssociationAssociationAdmin
+ EnableDisable,
+ genEquipInterfacesCetBcastPolicerAssociationAssociationRowStatus
+ RowStatus
+}
+
+
+genEquipInterfacesCetBcastPolicerAssociationIfIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Ethernet Logical port if-index table key."
+::= { genEquipInterfacesCetBcastPolicerAssociationEntry 1 }
+
+genEquipInterfacesCetBcastPolicerAssociationAssociatedProfileId OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Policer Profile."
+::= { genEquipInterfacesCetBcastPolicerAssociationEntry 2 }
+
+genEquipInterfacesCetBcastPolicerAssociationAssociationAdmin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Broadcast Policer Admin (enable / disable)."
+::= { genEquipInterfacesCetBcastPolicerAssociationEntry 3 }
+
+genEquipInterfacesCetBcastPolicerAssociationAssociationRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Table Mib Row Status."
+::= { genEquipInterfacesCetBcastPolicerAssociationEntry 30 }
+
+
+
+--
+-- Switch Application if-logical-ethertype1_policing-table
+--
+
+genEquipInterfacesCetEtype1PolicerAssociationTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipInterfacesCetEtype1PolicerAssociationEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Ethernet Policing of user configuration ethertype type 1 (at port level) table."
+ ::= { genEquipInterfacesCet 7 }
+
+genEquipInterfacesCetEtype1PolicerAssociationEntry OBJECT-TYPE
+ SYNTAX GenEquipInterfacesCetEtype1PolicerAssociationEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Ethernet Policing of user configuration ethertype type 1 (at port level) table entry."
+ INDEX { genEquipInterfacesCetEtype1PolicerAssociationIfIndex }
+ ::= { genEquipInterfacesCetEtype1PolicerAssociationTable 1 }
+
+GenEquipInterfacesCetEtype1PolicerAssociationEntry ::=
+ SEQUENCE {
+ genEquipInterfacesCetEtype1PolicerAssociationIfIndex
+ INTEGER,
+ genEquipInterfacesCetEtype1PolicerAssociationProfileId
+ INTEGER,
+ genEquipInterfacesCetEtype1PolicerAssociationEthertype
+ INTEGER,
+ genEquipInterfacesCetEtype1PolicerAssociationAdmin
+ EnableDisable,
+ genEquipInterfacesCetEtype1PolicerAssociationRowStatus
+ RowStatus
+}
+
+
+genEquipInterfacesCetEtype1PolicerAssociationIfIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Ethernet Logical port if-index table key."
+::= { genEquipInterfacesCetEtype1PolicerAssociationEntry 1 }
+
+genEquipInterfacesCetEtype1PolicerAssociationProfileId OBJECT-TYPE
+ SYNTAX INTEGER (1..256)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Ingress Policer Profile ID."
+::= { genEquipInterfacesCetEtype1PolicerAssociationEntry 2 }
+
+genEquipInterfacesCetEtype1PolicerAssociationEthertype OBJECT-TYPE
+ SYNTAX INTEGER (0..65535)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Ethernet Ethertype 1 user configuration value."
+::= { genEquipInterfacesCetEtype1PolicerAssociationEntry 3 }
+
+genEquipInterfacesCetEtype1PolicerAssociationAdmin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Ingress Ethertype 1 Policer Admin (enable / disable)."
+::= { genEquipInterfacesCetEtype1PolicerAssociationEntry 4 }
+
+genEquipInterfacesCetEtype1PolicerAssociationRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Table Mib Row Status."
+::= { genEquipInterfacesCetEtype1PolicerAssociationEntry 30 }
+
+
+--
+-- Switch Application if-logical-ethertype2_policing-table
+--
+
+genEquipInterfacesCetEtype2PolicerAssociationTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipInterfacesCetEtype2PolicerAssociationEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Ethernet Policing of user configuration ethertype type 2 (at port level) table."
+ ::= { genEquipInterfacesCet 8 }
+
+genEquipInterfacesCetEtype2PolicerAssociationEntry OBJECT-TYPE
+ SYNTAX GenEquipInterfacesCetEtype2PolicerAssociationEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Ethernet Policing of user configuration ethertype type 2 (at port level) table."
+ INDEX { genEquipInterfacesCetEtype2PolicerAssociationIfIndex }
+ ::= { genEquipInterfacesCetEtype2PolicerAssociationTable 1 }
+
+GenEquipInterfacesCetEtype2PolicerAssociationEntry ::=
+ SEQUENCE {
+ genEquipInterfacesCetEtype2PolicerAssociationIfIndex
+ INTEGER,
+ genEquipInterfacesCetEtype2PolicerAssociationAssociatedProfileId
+ INTEGER,
+ genEquipInterfacesCetEtype2PolicerAssociationEthertype
+ INTEGER,
+ genEquipInterfacesCetEtype2PolicerAssociationAdmin
+ EnableDisable,
+ genEquipInterfacesCetEtype2PolicerAssociationRowStatus
+ RowStatus
+}
+
+
+genEquipInterfacesCetEtype2PolicerAssociationIfIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Ethernet Logical port if-index table key."
+::= { genEquipInterfacesCetEtype2PolicerAssociationEntry 1 }
+
+genEquipInterfacesCetEtype2PolicerAssociationAssociatedProfileId OBJECT-TYPE
+ SYNTAX INTEGER (1..256)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Ingress Policer Profile ID."
+::= { genEquipInterfacesCetEtype2PolicerAssociationEntry 2 }
+
+genEquipInterfacesCetEtype2PolicerAssociationEthertype OBJECT-TYPE
+ SYNTAX INTEGER (0..65535)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Ethernet Ethertype 2 user configuration value."
+::= { genEquipInterfacesCetEtype2PolicerAssociationEntry 3 }
+
+genEquipInterfacesCetEtype2PolicerAssociationAdmin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Ingress Ethertype 2 Policer Admin (enable / disable)."
+::= { genEquipInterfacesCetEtype2PolicerAssociationEntry 4 }
+
+genEquipInterfacesCetEtype2PolicerAssociationRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Table Mib Row Status."
+::= { genEquipInterfacesCetEtype2PolicerAssociationEntry 30 }
+
+
+
+--
+-- Switch Application if-logical-ethertype3_policing-table
+--
+
+genEquipInterfacesCetEtype3PolicerAssociationTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipInterfacesCetEtype3PolicerAssociationEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Ethernet Policing of user configuration ethertype type 3 (at port level) table."
+ ::= { genEquipInterfacesCet 9 }
+
+genEquipInterfacesCetEtype3PolicerAssociationEntry OBJECT-TYPE
+ SYNTAX GenEquipInterfacesCetEtype3PolicerAssociationEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Ethernet Policing of user configuration ethertype type 3 (at port level) table entry."
+ INDEX { genEquipInterfacesCetEtype3PolicerAssociationIfIndex }
+ ::= { genEquipInterfacesCetEtype3PolicerAssociationTable 1 }
+
+GenEquipInterfacesCetEtype3PolicerAssociationEntry ::=
+ SEQUENCE {
+ genEquipInterfacesCetEtype3PolicerAssociationIfIndex
+ INTEGER,
+ genEquipInterfacesCetEtype3PolicerAssociationAssociatedProfileId
+ INTEGER,
+ genEquipInterfacesCetEtype3PolicerAssociationEthertype
+ INTEGER,
+ genEquipInterfacesCetEtype3PolicerAssociationAdmin
+ EnableDisable,
+ genEquipInterfacesCetEtype3PolicerAssociationRowStatus
+ RowStatus
+}
+
+
+genEquipInterfacesCetEtype3PolicerAssociationIfIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Ethernet Logical port if-index table key."
+::= { genEquipInterfacesCetEtype3PolicerAssociationEntry 1 }
+
+genEquipInterfacesCetEtype3PolicerAssociationAssociatedProfileId OBJECT-TYPE
+ SYNTAX INTEGER (1..256)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Ingress Policer Profile ID."
+::= { genEquipInterfacesCetEtype3PolicerAssociationEntry 2 }
+
+genEquipInterfacesCetEtype3PolicerAssociationEthertype OBJECT-TYPE
+ SYNTAX INTEGER (0..65535)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Ethernet Ethertype 3 user configuration value."
+::= { genEquipInterfacesCetEtype3PolicerAssociationEntry 3 }
+
+genEquipInterfacesCetEtype3PolicerAssociationAdmin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Ingress Ethertype 3 Policer Admin (enable / disable)."
+::= { genEquipInterfacesCetEtype3PolicerAssociationEntry 4 }
+
+genEquipInterfacesCetEtype3PolicerAssociationRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Table Mib Row Status."
+::= { genEquipInterfacesCetEtype3PolicerAssociationEntry 30 }
+
+
+--
+-- Switch Application if-logical-multicast_policing-table
+--
+
+genEquipInterfacesCetMcastPolicerAssociationTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipInterfacesCetMcastPolicerAssociationEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Ethernet Port Multicast configuration table."
+ ::= { genEquipInterfacesCet 10 }
+
+genEquipInterfacesCetMcastPolicerAssociationEntry OBJECT-TYPE
+ SYNTAX GenEquipInterfacesCetMcastPolicerAssociationEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Ethernet Port Multicast configuration table."
+ INDEX { genEquipInterfacesCetMcastPolicerAssociationIfIndex }
+ ::= { genEquipInterfacesCetMcastPolicerAssociationTable 1 }
+
+GenEquipInterfacesCetMcastPolicerAssociationEntry ::=
+ SEQUENCE {
+ genEquipInterfacesCetMcastPolicerAssociationIfIndex
+ INTEGER,
+ genEquipInterfacesCetMcastPolicerAssociationAssociatedProfileId
+ INTEGER,
+ genEquipInterfacesCetMcastPolicerAssociationAdmin
+ EnableDisable,
+ genEquipInterfacesCetMcastPolicerAssociationAssociationRowStatus
+ RowStatus
+}
+
+
+genEquipInterfacesCetMcastPolicerAssociationIfIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Ethernet Logical port if-index table key."
+::= { genEquipInterfacesCetMcastPolicerAssociationEntry 1 }
+
+genEquipInterfacesCetMcastPolicerAssociationAssociatedProfileId OBJECT-TYPE
+ SYNTAX INTEGER (1..256)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Ingress Policer Profile ID."
+::= { genEquipInterfacesCetMcastPolicerAssociationEntry 2 }
+
+genEquipInterfacesCetMcastPolicerAssociationAdmin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Ingress Multicast Policer Admin (enable / disable)."
+::= { genEquipInterfacesCetMcastPolicerAssociationEntry 3 }
+
+genEquipInterfacesCetMcastPolicerAssociationAssociationRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Table Mib Row Status."
+::= { genEquipInterfacesCetMcastPolicerAssociationEntry 30 }
+
+
+--
+-- Switch Application if-logical-unicast_policing-table
+--
+
+genEquipInterfacesCetUcastPolicerAssociationTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipInterfacesCetUcastPolicerAssociationEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Ethernet Port Multicast configuration table."
+ ::= { genEquipInterfacesCet 11 }
+
+genEquipInterfacesCetUcastPolicerAssociationEntry OBJECT-TYPE
+ SYNTAX GenEquipInterfacesCetUcastPolicerAssociationEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Ethernet Port Multicast configuration table."
+ INDEX { genEquipInterfacesCetUcastPolicerAssociationIfIndex }
+ ::= { genEquipInterfacesCetUcastPolicerAssociationTable 1 }
+
+GenEquipInterfacesCetUcastPolicerAssociationEntry ::=
+ SEQUENCE {
+ genEquipInterfacesCetUcastPolicerAssociationIfIndex
+ INTEGER,
+ genEquipInterfacesCetUcastPolicerAssociationAssociatedProfileId
+ INTEGER,
+ genEquipInterfacesCetUcastPolicerAssociationAdmin
+ EnableDisable,
+ genEquipInterfacesCetUcastPolicerAssociationRowStatus
+ RowStatus
+}
+
+
+genEquipInterfacesCetUcastPolicerAssociationIfIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Ethernet Logical port if-index table key."
+::= { genEquipInterfacesCetUcastPolicerAssociationEntry 1 }
+
+genEquipInterfacesCetUcastPolicerAssociationAssociatedProfileId OBJECT-TYPE
+ SYNTAX INTEGER (1..256)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Ingress Policer Profile ID."
+::= { genEquipInterfacesCetUcastPolicerAssociationEntry 2 }
+
+genEquipInterfacesCetUcastPolicerAssociationAdmin OBJECT-TYPE
+ SYNTAX EnableDisable
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Ingress Unicast Policer Admin (enable / disable)."
+::= { genEquipInterfacesCetUcastPolicerAssociationEntry 3 }
+
+genEquipInterfacesCetUcastPolicerAssociationRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Table Mib Row Status."
+::= { genEquipInterfacesCetUcastPolicerAssociationEntry 30 }
+
+--
+-- Switch Application sys-if-logical-mgr-if-logical-lag-table
+--
+
+genEquipInterfacesCetLagTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipInterfacesCetLagEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table holds the members of a Link Aggregation Group."
+ ::= { genEquipInterfacesCet 12 }
+
+genEquipInterfacesCetLagEntry OBJECT-TYPE
+ SYNTAX GenEquipInterfacesCetLagEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table holds the members of a Link Aggregation Group entry."
+ INDEX { genEquipInterfacesCetLagIfIndex }
+ ::= { genEquipInterfacesCetLagTable 1 }
+
+GenEquipInterfacesCetLagEntry ::=
+ SEQUENCE {
+ genEquipInterfacesCetLagIfIndex
+ INTEGER,
+ genEquipInterfacesCetLagMember1IfIndex
+ INTEGER,
+ genEquipInterfacesCetLagMember2IfIndex
+ INTEGER,
+ genEquipInterfacesCetLagMember3IfIndex
+ INTEGER,
+ genEquipInterfacesCetLagMember4IfIndex
+ INTEGER,
+ genEquipInterfacesCetLagMember5IfIndex
+ INTEGER,
+ genEquipInterfacesCetLagMember6IfIndex
+ INTEGER,
+ genEquipInterfacesCetLagMember7IfIndex
+ INTEGER,
+ genEquipInterfacesCetLagMember8IfIndex
+ INTEGER,
+ genEquipInterfacesCetLagMember9IfIndex
+ INTEGER,
+ genEquipInterfacesCetLagMember10IfIndex
+ INTEGER,
+ genEquipInterfacesCetLagMember11IfIndex
+ INTEGER,
+ genEquipInterfacesCetLagMember12IfIndex
+ INTEGER,
+ genEquipInterfacesCetLagMember13IfIndex
+ INTEGER,
+ genEquipInterfacesCetLagMember14IfIndex
+ INTEGER,
+ genEquipInterfacesCetLagMember15IfIndex
+ INTEGER,
+ genEquipInterfacesCetLagMember16IfIndex
+ INTEGER,
+ genEquipInterfacesCetLagRowStatus
+ RowStatus
+}
+
+
+genEquipInterfacesCetLagIfIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Link aggregation group IF index."
+::= { genEquipInterfacesCetLagEntry 1 }
+
+genEquipInterfacesCetLagMember1IfIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Link aggregation member 1 IF index."
+::= { genEquipInterfacesCetLagEntry 2 }
+
+genEquipInterfacesCetLagMember2IfIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Link aggregation member 2 IF index."
+::= { genEquipInterfacesCetLagEntry 3 }
+
+genEquipInterfacesCetLagMember3IfIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Link aggregation member 3 IF index."
+::= { genEquipInterfacesCetLagEntry 4 }
+
+genEquipInterfacesCetLagMember4IfIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Link aggregation member 4 IF index."
+::= { genEquipInterfacesCetLagEntry 5 }
+
+genEquipInterfacesCetLagMember5IfIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Link aggregation member 5 IF index."
+::= { genEquipInterfacesCetLagEntry 6 }
+
+genEquipInterfacesCetLagMember6IfIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Link aggregation member 6 IF index."
+::= { genEquipInterfacesCetLagEntry 7 }
+
+genEquipInterfacesCetLagMember7IfIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Link aggregation member 7 IF index."
+::= { genEquipInterfacesCetLagEntry 8 }
+
+genEquipInterfacesCetLagMember8IfIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Link aggregation member 8 IF index."
+::= { genEquipInterfacesCetLagEntry 9 }
+
+genEquipInterfacesCetLagMember9IfIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Link aggregation member 9 IF index."
+::= { genEquipInterfacesCetLagEntry 10 }
+
+genEquipInterfacesCetLagMember10IfIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Link aggregation member 9 IF index."
+::= { genEquipInterfacesCetLagEntry 11 }
+
+genEquipInterfacesCetLagMember11IfIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Link aggregation member 11 IF index."
+::= { genEquipInterfacesCetLagEntry 12 }
+
+genEquipInterfacesCetLagMember12IfIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Link aggregation member 12 IF index."
+::= { genEquipInterfacesCetLagEntry 13 }
+
+genEquipInterfacesCetLagMember13IfIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Link aggregation member 13 IF index."
+::= { genEquipInterfacesCetLagEntry 14 }
+
+genEquipInterfacesCetLagMember14IfIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Link aggregation member 14 IF index."
+::= { genEquipInterfacesCetLagEntry 15 }
+
+genEquipInterfacesCetLagMember15IfIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Link aggregation member 15 IF index."
+::= { genEquipInterfacesCetLagEntry 16 }
+
+genEquipInterfacesCetLagMember16IfIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Link aggregation member 16 IF index."
+::= { genEquipInterfacesCetLagEntry 17 }
+
+genEquipInterfacesCetLagRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Table Mib Row Status."
+::= { genEquipInterfacesCetLagEntry 30 }
+
+--
+-- Switch Application sw-ap-service-to-instance-table
+--
+
+genEquipServicesCetConfigServiceToInstanceTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipServicesCetConfigServiceToInstanceEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table is used for mapping xSTP instance number per service."
+ ::= { genEquipInterfacesCet 13 }
+
+genEquipServicesCetConfigServiceToInstanceEntry OBJECT-TYPE
+ SYNTAX GenEquipServicesCetConfigServiceToInstanceEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table entry is used for mapping xSTP instance number per service."
+ INDEX { genEquipServicesCetConfigServiceToInstanceServiceIndex }
+ ::= { genEquipServicesCetConfigServiceToInstanceTable 1 }
+
+GenEquipServicesCetConfigServiceToInstanceEntry ::=
+ SEQUENCE {
+ genEquipServicesCetConfigServiceToInstanceServiceIndex
+ INTEGER,
+ genEquipServicesCetConfigServiceToInstanceInstanceIndex
+ INTEGER
+}
+
+
+genEquipServicesCetConfigServiceToInstanceServiceIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Service ID."
+::= { genEquipServicesCetConfigServiceToInstanceEntry 1 }
+
+genEquipServicesCetConfigServiceToInstanceInstanceIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "xSTP Instance ID for the specific Service."
+::= { genEquipServicesCetConfigServiceToInstanceEntry 2 }
+
+-- IF Manager if-manager-configuration-table
+genEquipInterfacesIfManager OBJECT IDENTIFIER ::= {genEquipInterfaces 9}
+
+genEquipInterfacesIfManagerTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipInterfacesIfManagerEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table contains a list of configuration information about the user managed interfaces."
+ ::= { genEquipInterfacesIfManager 1 }
+
+genEquipInterfacesIfManagerEntry OBJECT-TYPE
+ SYNTAX GenEquipInterfacesIfManagerEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table entry contains a list of configuration information about the user managed interfaces."
+ INDEX { ifIndex }
+ ::= { genEquipInterfacesIfManagerTable 1 }
+
+GenEquipInterfacesIfManagerEntry ::=
+ SEQUENCE {
+ genEquipInterfacesIfManagerifCascading
+ IfMgrTrueFalse,
+ genEquipInterfacesIfManagerifSecondaryOperStatus
+ INTEGER
+}
+
+
+genEquipInterfacesIfManagerifCascading OBJECT-TYPE
+ SYNTAX IfMgrTrueFalse
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The cascading state of the interface."
+::= { genEquipInterfacesIfManagerEntry 1 }
+
+genEquipInterfacesIfManagerifSecondaryOperStatus OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "An additional information about the current operational state of the interface."
+::= { genEquipInterfacesIfManagerEntry 2 }
+
+--
+-- IF Cascading if-physical-cascading-port-config-table
+genEquipInterfacesCascading OBJECT IDENTIFIER ::= {genEquipInterfaces 10}
+
+genEquipInterfacesCascadingConfigurationTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipInterfacesCascadingConfigurationEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Cascading Port Configuration Table."
+ ::= { genEquipInterfacesCascading 1 }
+
+genEquipInterfacesCascadingConfigurationEntry OBJECT-TYPE
+ SYNTAX GenEquipInterfacesCascadingConfigurationEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Cascading Port Configuration Table entry."
+ INDEX { genEquipInterfacesCascadingConfigurationIfindex }
+ ::= { genEquipInterfacesCascadingConfigurationTable 1 }
+
+GenEquipInterfacesCascadingConfigurationEntry ::=
+ SEQUENCE {
+ genEquipInterfacesCascadingConfigurationIfindex
+ INTEGER,
+ genEquipInterfacesCascadingConfigurationCascading
+ MibTrueFalse
+}
+
+
+genEquipInterfacesCascadingConfigurationIfindex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Cascading port if-index table key."
+::= { genEquipInterfacesCascadingConfigurationEntry 1 }
+
+genEquipInterfacesCascadingConfigurationCascading OBJECT-TYPE
+ SYNTAX MibTrueFalse
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates if the port is cascading or not."
+::= { genEquipInterfacesCascadingConfigurationEntry 2 }
+
+
+-- STM-1/OC-3
+genEquipInterfacesStm1Rst OBJECT IDENTIFIER ::= {genEquipInterfaces 11}
+
+-- stm1-config-table
+genEquipInterfacesStm1RstConfigTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipInterfacesStm1RstConfigEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "STM-1/OC-3 configuration table."
+ ::= { genEquipInterfacesStm1Rst 1 }
+
+genEquipInterfacesStm1RstConfigEntry OBJECT-TYPE
+ SYNTAX GenEquipInterfacesStm1RstConfigEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "STM-1/OC-3 configuration table entry."
+ INDEX { genEquipInterfacesStm1RstConfigIfindex }
+ ::= { genEquipInterfacesStm1RstConfigTable 1 }
+
+GenEquipInterfacesStm1RstConfigEntry ::=
+ SEQUENCE {
+ genEquipInterfacesStm1RstConfigIfindex
+ INTEGER,
+ genEquipInterfacesStm1RstConfigPort
+ INTEGER,
+ genEquipInterfacesStm1RstConfigAdmin
+ EnableDisableSMI2,
+ genEquipInterfacesStm1RstConfigMute
+ INTEGER
+}
+
+
+genEquipInterfacesStm1RstConfigIfindex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The interface index of the STM-1/OC-3 interface."
+::= { genEquipInterfacesStm1RstConfigEntry 1 }
+
+genEquipInterfacesStm1RstConfigPort OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The port of the STM-1/OC-3 interface."
+::= { genEquipInterfacesStm1RstConfigEntry 2 }
+
+genEquipInterfacesStm1RstConfigAdmin OBJECT-TYPE
+ SYNTAX EnableDisableSMI2
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The Admin Sate of the STM-1/OC-3 interface."
+::= { genEquipInterfacesStm1RstConfigEntry 3 }
+
+genEquipInterfacesStm1RstConfigMute OBJECT-TYPE
+ SYNTAX INTEGER {
+ unmute(0),
+ mute(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The SFP Mute config of the STM-1/OC-3 interface."
+::= { genEquipInterfacesStm1RstConfigEntry 4 }
+
+
+--
+-- stm1-status-table
+genEquipInterfacesStm1RstStatusTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipInterfacesStm1RstStatusEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "STM-1/OC-3 status table."
+ ::= { genEquipInterfacesStm1Rst 2 }
+
+genEquipInterfacesStm1RstStatusEntry OBJECT-TYPE
+ SYNTAX GenEquipInterfacesStm1RstStatusEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "STM-1/OC-3 status table entry."
+ INDEX { genEquipInterfacesStm1RstStatusIfindex }
+ ::= { genEquipInterfacesStm1RstStatusTable 1 }
+
+GenEquipInterfacesStm1RstStatusEntry ::=
+ SEQUENCE {
+ genEquipInterfacesStm1RstStatusIfindex
+ INTEGER,
+ genEquipInterfacesStm1RstStatusLoopbackTimer
+ INTEGER,
+ genEquipInterfacesStm1RstStatusLoopbackType
+ RSTLoopbackType,
+ genEquipInterfacesStm1RstStatusOperstatus
+ DownUp
+}
+
+
+genEquipInterfacesStm1RstStatusIfindex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The interface index of the STM-1/OC-3 interface."
+::= { genEquipInterfacesStm1RstStatusEntry 1 }
+
+genEquipInterfacesStm1RstStatusLoopbackTimer OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The port of the STM-1/OC-3 interface."
+::= { genEquipInterfacesStm1RstStatusEntry 2 }
+
+genEquipInterfacesStm1RstStatusLoopbackType OBJECT-TYPE
+ SYNTAX RSTLoopbackType
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The loopback type of the STM-1/OC-3 interface."
+::= { genEquipInterfacesStm1RstStatusEntry 3 }
+
+genEquipInterfacesStm1RstStatusOperstatus OBJECT-TYPE
+ SYNTAX DownUp
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The operational status of the STM-1/OC-3 interface."
+::= { genEquipInterfacesStm1RstStatusEntry 4 }
+
+-- stm1-status-table only prbs
+genEquipInterfacesStm1RstPrbsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GenEquipInterfacesStm1RstPrbsEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "STM-1/OC-3 status table."
+ ::= { genEquipInterfacesStm1Rst 3 }
+
+genEquipInterfacesStm1RstPrbsEntry OBJECT-TYPE
+ SYNTAX GenEquipInterfacesStm1RstPrbsEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "STM-1/OC-3 status table entry."
+ INDEX { genEquipInterfacesStm1RstStatusIfindex }
+ ::= { genEquipInterfacesStm1RstPrbsTable 1 }
+
+GenEquipInterfacesStm1RstPrbsEntry ::=
+ SEQUENCE {
+ genEquipInterfacesStm1RstPrbsCheckLineClear
+ INTEGER,
+ genEquipInterfacesStm1RstPrbsCheckLine
+ INTEGER,
+ genEquipInterfacesStm1RstPrbsCheckLineInv
+ INTEGER,
+ genEquipInterfacesStm1RstPrbsCheckLineStatus
+ DisplayString,
+ genEquipInterfacesStm1RstPrbsCheckLineTotErr
+ INTEGER,
+ genEquipInterfacesStm1RstPrbsCheckRadioClear
+ INTEGER,
+ genEquipInterfacesStm1RstPrbsCheckRadio
+ INTEGER,
+ genEquipInterfacesStm1RstPrbsCheckRadioInv
+ INTEGER,
+ genEquipInterfacesStm1RstPrbsCheckRadioStatus
+ DisplayString,
+ genEquipInterfacesStm1RstPrbsCheckRadioTotErr
+ INTEGER,
+ genEquipInterfacesStm1RstPrbsGenLine
+ INTEGER,
+ genEquipInterfacesStm1RstPrbsGenLineErrIns
+ INTEGER,
+ genEquipInterfacesStm1RstPrbsGenLineInv
+ INTEGER,
+ genEquipInterfacesStm1RstPrbsGenRadio
+ INTEGER,
+ genEquipInterfacesStm1RstPrbsGenRadioErrIns
+ INTEGER,
+ genEquipInterfacesStm1RstPrbsGenRadioInv
+ INTEGER
+}
+
+
+genEquipInterfacesStm1RstPrbsCheckLineClear OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The PRBS Checker Line Direction Reset counter of the STM-1/OC-3 interface."
+::= { genEquipInterfacesStm1RstPrbsEntry 1 }
+
+
+genEquipInterfacesStm1RstPrbsCheckLine OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The PRBS Checker Line Direction of the STM-1/OC-3 interface."
+::= { genEquipInterfacesStm1RstPrbsEntry 2 }
+
+genEquipInterfacesStm1RstPrbsCheckLineInv OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The PRBS Checker Line Direction of the STM-1/OC-3 interface."
+::= { genEquipInterfacesStm1RstPrbsEntry 3 }
+
+genEquipInterfacesStm1RstPrbsCheckLineStatus OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The PRBS Checker Line Direction Status of the STM-1/OC-3 interface."
+::= { genEquipInterfacesStm1RstPrbsEntry 4 }
+
+genEquipInterfacesStm1RstPrbsCheckLineTotErr OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The PRBS Checker Line Direction Total Error counter of the STM-1/OC-3 interface."
+::= { genEquipInterfacesStm1RstPrbsEntry 5 }
+
+genEquipInterfacesStm1RstPrbsCheckRadioClear OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The PRBS Checker Radio Direction Reset counter of the STM-1/OC-3 interface."
+::= { genEquipInterfacesStm1RstPrbsEntry 6 }
+
+genEquipInterfacesStm1RstPrbsCheckRadio OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The PRBS Checker Radio Direction of the STM-1/OC-3 interface."
+::= { genEquipInterfacesStm1RstPrbsEntry 7 }
+
+genEquipInterfacesStm1RstPrbsCheckRadioInv OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The PRBS Checker Radio Direction of the STM-1/OC-3 interface."
+::= { genEquipInterfacesStm1RstPrbsEntry 8 }
+
+genEquipInterfacesStm1RstPrbsCheckRadioStatus OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The PRBS Checker Radio Direction Status of the STM-1/OC-3 interface."
+::= { genEquipInterfacesStm1RstPrbsEntry 9 }
+
+genEquipInterfacesStm1RstPrbsCheckRadioTotErr OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The PRBS Checker Radio Direction Total Error counter of the STM-1/OC-3 interface."
+::= { genEquipInterfacesStm1RstPrbsEntry 10 }
+
+genEquipInterfacesStm1RstPrbsGenLine OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The PRBS Generator Line Direction of the STM-1/OC-3 interface."
+::= { genEquipInterfacesStm1RstPrbsEntry 11 }
+
+genEquipInterfacesStm1RstPrbsGenLineErrIns OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The PRBS Generator Line Direction Error Insert of the STM-1/OC-3 interface."
+::= { genEquipInterfacesStm1RstPrbsEntry 12 }
+
+genEquipInterfacesStm1RstPrbsGenLineInv OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The PRBS Generator Line Direction of the STM-1/OC-3 interface."
+::= { genEquipInterfacesStm1RstPrbsEntry 13 }
+
+genEquipInterfacesStm1RstPrbsGenRadio OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The PRBS Generator Radio Direction of the STM-1/OC-3 interface."
+::= { genEquipInterfacesStm1RstPrbsEntry 14 }
+
+genEquipInterfacesStm1RstPrbsGenRadioErrIns OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The PRBS Generator Radio Direction Error Insert of the STM-1/OC-3 interface."
+::= { genEquipInterfacesStm1RstPrbsEntry 15 }
+
+genEquipInterfacesStm1RstPrbsGenRadioInv OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The PRBS Generator Radio Direction of the STM-1/OC-3 interface."
+::= { genEquipInterfacesStm1RstPrbsEntry 16 }
+
+
+-- ###########################################################
+-- Traps Section
+-- ###########################################################
+
+alarmTrap TRAP-TYPE
+ ENTERPRISE microwave-radio
+ VARIABLES { genEquipCurrentAlarmCounter,
+ genEquipCurrentAlarmRaisedTimeT,
+ genEquipCurrentAlarmId,
+ genEquipCurrentAlarmSlotId,
+ genEquipCurrentAlarmInstance,
+ genEquipCurrentAlarmSeverity,
+ genEquipCurrentAlarmIfIndex,
+ genEquipCurrentAlarmModule,
+ genEquipCurrentAlarmDesc,
+ genEquipMostSevereAlarm,
+ genEquipNetworkAgentIp,
+ genEquipCurrentAlarmState,
+ genEquipTrapCfgMgrCLLI
+ }
+ DESCRIPTION "Alarm network trap"
+ ::= 1001
+
+eventTrap TRAP-TYPE
+ ENTERPRISE microwave-radio
+ VARIABLES { genEquipCurrentAlarmCounter,
+ genEquipCurrentAlarmRaisedTimeT,
+ genEquipCurrentAlarmId,
+ genEquipCurrentAlarmSlotId,
+ genEquipCurrentAlarmInstance,
+ genEquipCurrentAlarmSeverity,
+ genEquipCurrentAlarmIfIndex,
+ genEquipCurrentAlarmModule,
+ genEquipCurrentAlarmDesc,
+ genEquipMostSevereAlarm,
+ genEquipNetworkAgentIp,
+ genEquipTrapCfgMgrCLLI
+ }
+ DESCRIPTION "Event network trap"
+ ::= 1002
+
+
+heartbeatTrap TRAP-TYPE
+ ENTERPRISE microwave-radio
+ VARIABLES { genEquipTrapCfgMgrCLLI
+ }
+ DESCRIPTION "The heartbeat trap, sent once per heartbeat period"
+ ::= 1003
+
+eventTrapSTP TRAP-TYPE -- STP, RSTP, Ring RSTP trap
+ ENTERPRISE microwave-radio
+ VARIABLES { genEquipCurrentAlarmCounter, -- general event parameters
+ genEquipCurrentAlarmRaisedTimeT,
+ genEquipCurrentAlarmId,
+ genEquipCurrentAlarmSlotId,
+ genEquipCurrentAlarmInstance,
+ genEquipCurrentAlarmSeverity,
+ genEquipCurrentAlarmIfIndex,
+ genEquipCurrentAlarmModule,
+ genEquipCurrentAlarmDesc, -- This field shows show the descriptions of the event
+ -- "STP event - on port: <port>, root id: <root id>, Bridge role: <bridge role>,
+ -- Role: <Role>, State: <state>"
+ genEquipMostSevereAlarm,
+ genEquipNetworkAgentIp,
+ genEquipTrapCfgMgrCLLI,
+ genEquipEthernetSwitchXSTPParamsEthernetPortsRole, -- event trigger
+ genEquipEthernetSwitchXSTPParamsEthernetPortsState, -- event trigger
+ genEquipEthernetSwitchXSTPBridgeRole,
+ genEquipEthernetSwitchXSTPRootID -- RSTP parameters
+ }
+ DESCRIPTION "STP trap.
+ (1) The description field shows show the descriptions of the event
+ STP event - on port: <port>, root id: <root id>, Bridge role: <bridge role>,
+ Role: <Role>, State: <state>
+ In addition to the general trap event var-binds, this trap also adds the STP parameters."
+
+ ::= 1004
+
+genTraps OBJECT IDENTIFIER ::= { microwave-radio 11 }
+ generalV3Trap NOTIFICATION-TYPE
+ OBJECTS { genEquipCurrentAlarmCounter,
+ genEquipCurrentAlarmRaisedTimeT,
+ genEquipCurrentAlarmId,
+ genEquipCurrentAlarmSlotId,
+ genEquipCurrentAlarmInstance,
+ genEquipCurrentAlarmSeverity,
+ genEquipCurrentAlarmIfIndex,
+ genEquipCurrentAlarmModule,
+ genEquipCurrentAlarmDesc,
+ genEquipMostSevereAlarm,
+ genEquipNetworkAgentIp,
+ genEquipCurrentAlarmState,
+ genEquipTrapCfgMgrCLLI
+ }
+ STATUS current
+ DESCRIPTION "General network V3 trap"
+ ::= { genTraps 1 }
+
+ eventV3Trap NOTIFICATION-TYPE
+ OBJECTS { genEquipCurrentAlarmCounter,
+ genEquipCurrentAlarmRaisedTimeT,
+ genEquipCurrentAlarmId,
+ genEquipCurrentAlarmSlotId,
+ genEquipCurrentAlarmInstance,
+ genEquipCurrentAlarmSeverity,
+ genEquipCurrentAlarmIfIndex,
+ genEquipCurrentAlarmModule,
+ genEquipCurrentAlarmDesc,
+ genEquipMostSevereAlarm,
+ genEquipNetworkAgentIp,
+ genEquipTrapCfgMgrCLLI
+ }
+ STATUS current
+ DESCRIPTION "Event network V3 trap"
+ ::= { genTraps 2 }
+
+ heartbeatV3Trap NOTIFICATION-TYPE
+ OBJECTS {
+ genEquipTrapCfgMgrCLLI
+ }
+
+ STATUS current
+ DESCRIPTION
+ "Heartbeat v3 trap - The heartbeat trap, sent once per heartbeat period"
+ ::= { genTraps 3 }
+
+ eventv3TrapSTP NOTIFICATION-TYPE -- STP, RSTP, Ring RSTP trap
+ OBJECTS { genEquipCurrentAlarmCounter, -- general event parameters
+ genEquipCurrentAlarmRaisedTimeT,
+ genEquipCurrentAlarmId,
+ genEquipCurrentAlarmSlotId,
+ genEquipCurrentAlarmInstance,
+ genEquipCurrentAlarmSeverity,
+ genEquipCurrentAlarmIfIndex,
+ genEquipCurrentAlarmModule,
+ genEquipCurrentAlarmDesc, -- This field shows show the descriptions of the event
+ -- "STP event - on port: <port>, root id: <root id>, Bridge role: <bridge role>,
+ -- Role: <Role>, State: <state>,
+ genEquipMostSevereAlarm,
+ genEquipNetworkAgentIp,
+ genEquipTrapCfgMgrCLLI,
+ genEquipEthernetSwitchXSTPParamsEthernetPortsRole, -- event trigger
+ genEquipEthernetSwitchXSTPParamsEthernetPortsState, -- event trigger
+ genEquipEthernetSwitchXSTPBridgeRole,
+ genEquipEthernetSwitchXSTPRootID -- RSTP parameters
+ }
+ STATUS current
+ DESCRIPTION "STP trap.
+ (1) The description field shows show the descriptions of the event
+ STP event - on port: <port>, root id: <root id>, Bridge role: <bridge role>,
+ Role: <Role>, State: <state>,
+ In addition to the general trap event var-binds, this trap also adds the STP parameters."
+ ::= { genTraps 4 }
+
+
+
+-- ###########################################################
+-- NG Traps Section
+-- ###########################################################
+
+alarmTrap TRAP-TYPE
+ ENTERPRISE microwave-radio
+ VARIABLES { genEquipCurrentAlarmCounter,
+ genEquipCurrentAlarmRaisedTimeT,
+ genEquipNetworkAgentIp,
+ genEquipCurrentAlarmId,
+ genEquipCurrentAlarmDesc,
+ genEquipCurrentAlarmIfIndex,
+ genEquipCurrentAlarmInstance,
+ genEquipCurrentAlarmSeverity,
+ genEquipCurrentAlarmState,
+ genEquipCurrentAlarmUserText,
+ genEquipTrapCfgMgrCLLI,
+ genEquipNetworkAgentIpV6
+ }
+ DESCRIPTION "NG Alarm network trap"
+ ::= 2000
+
+heartbeatTrap TRAP-TYPE
+ ENTERPRISE microwave-radio
+ VARIABLES { genEquipCurrentAlarmCounter,
+ genEquipTrapCfgMgrCLLI
+ }
+ DESCRIPTION "NG heartbeat trap, sent once per heartbeat period"
+ ::= 2001
+
+
+-- ###########################################################
+-- NG Notificatin Section (V2 V3)
+-- ###########################################################
+
+ generalNGV3Trap NOTIFICATION-TYPE
+ OBJECTS { genEquipCurrentAlarmCounter,
+ genEquipCurrentAlarmRaisedTimeT,
+ genEquipNetworkAgentIp,
+ genEquipCurrentAlarmId,
+ genEquipCurrentAlarmDesc,
+ genEquipCurrentAlarmIfIndex,
+ genEquipCurrentAlarmInstance,
+ genEquipCurrentAlarmSeverity,
+ genEquipCurrentAlarmState,
+ genEquipCurrentAlarmUserText,
+ genEquipTrapCfgMgrCLLI,
+ genEquipNetworkAgentIpV6
+ }
+ STATUS current
+ DESCRIPTION "NG General network V3 trap"
+ ::= { genTraps 2000 }
+
+ heartbeatNGV3Trap NOTIFICATION-TYPE
+ OBJECTS { genEquipCurrentAlarmCounter,
+ genEquipTrapCfgMgrCLLI
+ }
+ STATUS current
+ DESCRIPTION "NG Heartbeat v3 trap - The heartbeat trap, sent once per heartbeat period"
+ ::= { genTraps 2001 }
+
+END
generated by cgit v1.2.3 (git 2.46.0) at 2026-02-26 11:50:52 +0000