Initial commitHEADmain

1 files changed, 1678 insertions, 0 deletions

diff --git a/MIBS/cambium/cnmatrix/LLDP-EXT-MED-CAMBIUM-MIB b/MIBS/cambium/cnmatrix/LLDP-EXT-MED-CAMBIUM-MIB
new file mode 100644
index 0000000..18ce714
--- /dev/null
+++ b/MIBS/cambium/cnmatrix/LLDP-EXT-MED-CAMBIUM-MIB
@@ -0,0 +1,1678 @@
+LLDP-EXT-MED-CAMBIUM-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, Integer32, Gauge32, Unsigned32, 
+    NOTIFICATION-TYPE
+        FROM SNMPv2-SMI
+    TEXTUAL-CONVENTION, TruthValue
+        FROM SNMPv2-TC
+    MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
+        FROM SNMPv2-CONF
+    lldpExtensions, lldpLocPortNum, 
+    lldpRemTimeMark, lldpRemLocalPortNum, lldpRemIndex,
+    lldpPortConfigEntry, lldpRemChassisIdSubtype, lldpRemChassisId
+        FROM LLDP-MIB
+    Dscp
+        FROM DIFFSERV-DSCP-TC
+    SnmpAdminString
+        FROM SNMP-FRAMEWORK-MIB;
+
+lldpXMedMIB MODULE-IDENTITY
+    LAST-UPDATED "200507280000Z" -- July 28th, 2005
+    ORGANIZATION "TIA TR41.4 Working Group"
+    CONTACT-INFO 
+"  WG-URL: http://www.tiaonline.org/standards/sfg/scope.cfm#TR-41.4
+             WG-EMail: tr41@tiacomm.org
+              Contact: Chair, TIA TR-41
+               Postal: Telecommunications Industry Association
+                       2500 Wilson Blvd., Suite 300
+                       Arlington, VA 22201 USA
+                  Tel: (703) 907-7700
+               E-mail: tr41@tiacomm.org"
+    DESCRIPTION
+            "The LLDP Management Information Base extension module for
+            TIA-TR41.4 media endpoint discovery information.
+
+            In order to assure the uniqueness of the LLDP-MIB,
+            lldpXMedMIB is branched from lldpExtensions using the TIA OUI 
+            value as the node.  An OUI/'company_id' is a 24 bit globally 
+            unique assigned number referenced by various standards.
+
+            Copyright (C) TIA (2005).  This version of this MIB module
+            is published as Section 13.3 of ANSI/TIA-1057.
+
+            See the standard itself for full legal notices."
+    REVISION        "200507280000Z" -- July 28th, 2005
+    DESCRIPTION
+            "Published as part of ANSI/TIA-1057."
+   ::= { lldpExtensions 4795 } 
+-- editor note: replace xxxxx with real number at standard publication
+
+------------------------------------------------------------------------------
+------------------------------------------------------------------------------
+--
+-- LLDP-MED Information
+--
+------------------------------------------------------------------------------
+------------------------------------------------------------------------------
+
+lldpXMedNotifications    OBJECT IDENTIFIER ::= { lldpXMedMIB 0 }
+lldpXMedObjects          OBJECT IDENTIFIER ::= { lldpXMedMIB 1 }
+
+
+-- LLDP MED extension MIB groups
+
+lldpXMedConfig     OBJECT IDENTIFIER ::= { lldpXMedObjects 1 }
+lldpXMedLocalData  OBJECT IDENTIFIER ::= { lldpXMedObjects 2 }
+lldpXMedRemoteData OBJECT IDENTIFIER ::= { lldpXMedObjects 3 }
+
+-- textual conventions
+
+LldpXMedDeviceClass  ::= TEXTUAL-CONVENTION
+    STATUS     current
+    DESCRIPTION
+            "Device Class to which the device is a member.  
+
+            A value of notDefined(0) indicates that the device 
+            has capabilities not covered by any of the LLDP-MED classes. 
+            
+            A value of endpointClass1(1) indicates that the device 
+            has endpoint class 1 capabilities. 
+            
+            A value of endpointClass2(2) indicates that the device 
+            has endpoint class 2 capabilities. 
+            
+            A value of endpointClass3(3) indicates that the device 
+            has endpoint class 3 capabilities. 
+            
+            A value of networkConnectivity(4) indicates that the device 
+            has network connectivity device capabilities. 
+            "
+    
+    SYNTAX      INTEGER {
+            notDefined(0),
+            endpointClass1(1),
+            endpointClass2(2),
+            endpointClass3(3),
+            networkConnectivity(4)
+    }
+
+-- LLDP-MED Capabilities TC
+
+LldpXMedCapabilities  ::= TEXTUAL-CONVENTION
+    STATUS     current
+    DESCRIPTION
+            "Bitmap that includes the MED organizationally defined set of LLDP
+            TLVs the device is capable of and whose transmission is allowed on 
+            the local LLDP agent by network management.  
+
+            Each bit in the bitmap corresponds to an LLDP-MED subtype associated  
+            with a specific TIA TR41.4 MED TLV.  
+
+            Having the bit 'capabilities(0)' set indicates that the LLDP 
+            agent refers to the Capabilities TLVs.
+
+            Having the bit 'networkPolicy(1)' set indicates that the LLDP 
+            agent refers to the Network Policy TLVs.
+
+            Having the bit 'location(2)' set indicates that 
+            the LLDP agent refers to the Emergency Communications
+            System Location TLVs.
+
+            Having the bit 'extendedPSE(3)' set indicates that 
+            the LLDP agent refers to the Extended PoE TLVs with PSE 
+            capabilities.
+
+            Having the bit 'extendedPD(4)' set indicates that 
+            the LLDP agent refers to the Extended PoE TLVs with PD 
+            capabilities.
+
+            Having the bit 'inventory(5)' set indicates that 
+            the LLDP agent refers to the Hardware Revision, Firmware 
+            Revision, Software Revision, Serial Number, Manufacturer Name, 
+            Model Name, and Asset ID TLVs."
+    
+    SYNTAX      BITS {
+            capabilities(0),
+            networkPolicy(1),
+            location(2),
+            extendedPSE(3),
+            extendedPD(4),
+            inventory(5)
+    }
+
+
+--  Location Subtype Textual Convention
+
+LocationSubtype ::= TEXTUAL-CONVENTION 
+    STATUS      current
+    DESCRIPTION
+            "The location subtype advertised by the remote endpoint.
+
+             A value coordinateBased(2) indicates that the location subtype
+             advertised by the endpoint is defined to use the relevant sub-
+             fields of the DHCP option for Coordinate LCI as specified in 
+             ANSI/TIA-1057, Section 10.2.4.3.1.
+
+             A value civicAddress(3) indicates that the location subtype
+             advertised by the endpoint is defined to use the relevant sub-
+             fields of the DHCP option for Civic Address as specified in 
+             ANSI/TIA-1057, Section 10.2.4.3.2.
+
+             A value elin(4) indicates that the location subtype 
+             advertised by the endpoint is defined to use the Emergency 
+             Location Information Number (ELIN) as specified in
+             ANSI/TIA-1057, Section 10.2.4.3.3."
+    SYNTAX      INTEGER  {
+                    unknown(1),
+                    coordinateBased(2),
+                    civicAddress(3),
+                    elin(4)
+                }
+
+-- Policy Application Type Textual Convention
+
+PolicyAppType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+            "The media type that defines the primary function of the
+             application for the policy advertised by an endpoint.
+
+             Having the bit voice(1) set indicates that the media type defining
+             a primary function of the application for the policy advertised on 
+             the local port is voice. 
+
+             Having the bit voiceSignaling(3) set indicates that the media type 
+             defining a primary function of the application for the policy 
+             advertised on the local port is voice signaling. 
+
+             Having the bit guestVoice(4) set indicates that the media type 
+             Defining a primary function of the application for the policy            
+             advertised on the local port is guest voice. 
+
+             Having the bit guestVoiceSignaling(5) set indicates that the media
+             type defining a primary function of the application for the policy 
+             advertised on the local port is guest voice signaling. 
+
+             Having the bit softPhoneVoice(6) set indicates that the media type 
+             Defining a primary function of the application for the policy 
+             advertised on the local port is softphone voice. 
+
+             Having the bit videoConferencing(7) set indicates that the media 
+             type defining a primary function of the application for the policy 
+             advertised on the local port is voice. 
+
+             Having the bit streamingVideo(8) set indicates that the media type 
+             defining a primary function of the application for the policy 
+             advertised on  the local port is streaming video. 
+
+             Having the bit videoSignaling(2) set indicates that the media type 
+             defining a primary function of the application for the policy 
+             advertised on the local port is video signaling."
+    SYNTAX      BITS  {
+                    unknown(0),
+                    voice(1),
+                    voiceSignaling(2),
+                    guestVoice(3),
+                    guestVoiceSignaling(4),
+                    softPhoneVoice(5),
+                    videoconferencing(6),
+                    streamingVideo(7),
+                    videoSignaling(8)
+                }
+
+    
+------------------------------------------------------------------------------
+-- MED - Configuration
+------------------------------------------------------------------------------
+
+lldpXMedLocDeviceClass    OBJECT-TYPE
+    SYNTAX      LldpXMedDeviceClass
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Local Device Class."
+    REFERENCE 
+            " ANSI/TIA-1057, Section 10.2.2.2"
+    ::= { lldpXMedConfig 1 }
+
+
+lldpXMedPortConfigTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF LldpXMedPortConfigEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "A table that controls selection of LLDP TLVs to be transmitted 
+            on individual ports."
+    ::= { lldpXMedConfig 2 }
+
+lldpXMedPortConfigEntry  OBJECT-TYPE
+    SYNTAX      LldpXMedPortConfigEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "LLDP configuration information that controls the
+            transmission of the MED organizationally defined TLVs on
+            LLDP transmission capable ports.
+
+            This configuration object augments the lldpPortConfigEntry of
+            the LLDP-MIB, therefore it is only present along with the port
+            configuration defined by the associated lldpPortConfigEntry
+            entry.
+
+            Each active lldpXMedPortConfigEntry must be stored and 
+            retrieved from non-volatile storage (along with the 
+            corresponding lldpPortConfigEntry) after a re-initialization 
+            of the management system."
+    AUGMENTS { lldpPortConfigEntry }
+    ::= { lldpXMedPortConfigTable 1 }
+
+LldpXMedPortConfigEntry ::= SEQUENCE {
+    lldpXMedPortCapSupported        LldpXMedCapabilities,  
+    lldpXMedPortConfigTLVsTxEnable  LldpXMedCapabilities,
+    lldpXMedPortConfigNotifEnable   TruthValue 
+}
+
+lldpXMedPortCapSupported  OBJECT-TYPE
+    SYNTAX      LldpXMedCapabilities
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The bitmap includes the MED organizationally defined set of LLDP
+            TLVs whose transmission is possible for the respective port
+            on the LLDP agent of the device. Each bit in the bitmap corresponds
+            to an LLDP-MED subtype associated with a specific TIA TR41.4 MED 
+            optional TLV. If the bit is set, the agent supports the 
+            corresponding TLV."
+    REFERENCE 
+            "ANSI/TIA-1057, Section 10.2.2.3"
+    ::= { lldpXMedPortConfigEntry  1 }
+
+lldpXMedPortConfigTLVsTxEnable  OBJECT-TYPE
+    SYNTAX      LldpXMedCapabilities
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "The lldpXMedPortConfigTLVsTxEnable, defined as a bitmap,
+            includes the MED organizationally defined set of LLDP
+            TLVs whose transmission is allowed on the local LLDP agent by
+            the network management.  Each bit in the bitmap corresponds
+            to an LLDP-MED subtype associated with a specific TIA TR41.4 MED 
+            optional TLV. If the bit is set, the agent will send the 
+            corresponding TLV if the respective capability is supported per 
+            port.
+
+            Setting a bit with in this object for a non-supported capability
+            shall have no functional effect and will result in an inconsistent
+            value error returned to the management application. 
+ 
+            There are other rules and restrictions that prevent arbitrary
+            combinations of TLVs to be enabled on LLDP-MED devices according to
+            the device classes. These rules are defined in Section 10.2.1, 
+            Tables 5 - 9 of ANSI/TIA-1057. In case a management application 
+            attempts to set this object to a value that does not follow the rules, 
+            the set operation shall have and will result in an inconsistent 
+            value error returned to the management application. 
+
+            Setting this object to an empty set is valid and effectively 
+            disables LLDP-MED on a per-port basis by disabling transmission of 
+            all MED organizational TLVs. In this case the remote tables objects 
+            in the LLDP-MED MIB corresponding to the respective port will not 
+            be populated. 
+             
+            The default value for lldpXMedPortConfigTLVsTxEnable object
+            is an empty set, which means no enumerated values are set.
+
+            The value of this object must be restored from non-volatile
+            storage after a re-initialization of the management system."
+    REFERENCE 
+            "ANSI/TIA-1057, Section 10.2.2.3"
+    ::= { lldpXMedPortConfigEntry  2 }
+
+lldpXMedPortConfigNotifEnable    OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "A value of 'true(1)' enables sending the topology change 
+             traps on this port.
+             A value of 'false(2)' disables sending the topology change 
+             traps on this port."
+    REFERENCE 
+            " ANSI/TIA-1057, Section 12.3"
+    DEFVAL   { false }
+    ::= { lldpXMedPortConfigEntry 3 }
+
+
+
+lldpXMedFastStartRepeatCount    OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..10)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "The number of times the fast start LLDPDU are being sent during the 
+             activation of the fast start mechanism defined by LLDP-MED."
+    REFERENCE 
+            " ANSI/TIA-1057, Section 11.2.1"
+    DEFVAL   { 3 }
+    ::= { lldpXMedConfig 3 }
+
+
+
+
+------------------------------------------------------------------------------
+-- LLDP-MED - Local Device Information 
+------------------------------------------------------------------------------
+---
+--- lldpXMedLocMediaPolicyTable: Local Media Policy
+---                        Information Table
+---
+---
+lldpXMedLocMediaPolicyTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF LldpXMedLocMediaPolicyEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "This table contains one row per policy type per port 
+             of media policy information (as a part of the MED 
+             organizational extension) on the local system known 
+             to this agent."
+    ::= { lldpXMedLocalData 1 }
+ 
+lldpXMedLocMediaPolicyEntry OBJECT-TYPE
+    SYNTAX      LldpXMedLocMediaPolicyEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "Information about a particular policy on a specific 
+             port component."
+    INDEX   { lldpLocPortNum, lldpXMedLocMediaPolicyAppType }
+    ::= { lldpXMedLocMediaPolicyTable 1 }
+ 
+LldpXMedLocMediaPolicyEntry ::= SEQUENCE {
+              lldpXMedLocMediaPolicyAppType        PolicyAppType,
+              lldpXMedLocMediaPolicyVlanID         Integer32,
+              lldpXMedLocMediaPolicyPriority       Integer32, 
+              lldpXMedLocMediaPolicyDscp           Dscp,
+              lldpXMedLocMediaPolicyUnknown        TruthValue,
+              lldpXMedLocMediaPolicyTagged         TruthValue
+} 
+
+lldpXMedLocMediaPolicyAppType OBJECT-TYPE
+    SYNTAX      PolicyAppType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "The media type that defines the primary function of the
+             application for the policy advertised by an endpoint."
+    REFERENCE 
+            "ANSI/TIA-1057, Section 10.2.3.1"
+    ::= { lldpXMedLocMediaPolicyEntry 1 }
+
+lldpXMedLocMediaPolicyVlanID  OBJECT-TYPE
+    SYNTAX      Integer32 (0|1..4094|4095)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "An extension of the VLAN Identifier for the port, 
+             as defined in IEEE 802.1P-1998.
+  
+             A value of 1 through 4094 is used to define a valid PVID.
+  
+             A value of 0 shall be used if the device is using priority tagged
+             frames, meaning that only the 802.1p priority level is significant
+             and the default VID of the ingress port is being used instead.
+  
+             A value of 4095 is reserved for implementation use."
+    REFERENCE 
+            " ANSI/TIA-1057, Section 10.2.3.5"
+    ::= { lldpXMedLocMediaPolicyEntry 2 }
+
+lldpXMedLocMediaPolicyPriority  OBJECT-TYPE
+    SYNTAX      Integer32 (0..7)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This object contains the value of the 802.1p priority
+            which is associated with the given port on the
+            local system."
+    REFERENCE 
+            " ANSI/TIA-1057, Section 10.2.3.6 "
+    ::= { lldpXMedLocMediaPolicyEntry 3 }
+
+lldpXMedLocMediaPolicyDscp  OBJECT-TYPE
+    SYNTAX      Dscp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This object contains the value of the Differentiated Service
+            Code Point (DSCP) as defined in IETF RFC 2474 and RFC 2475
+            which is associated with the given port on the local system."
+    REFERENCE 
+            " ANSI/TIA-1057, Section 10.2.3.7"
+    ::= { lldpXMedLocMediaPolicyEntry 4 }
+
+lldpXMedLocMediaPolicyUnknown  OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "A value of 'true' indicates that the 
+             network policy for the specified application type is 
+             currently unknown.  In this case, the VLAN ID, the 
+             layer 2 priority and the DSCP value fields are ignored.
+             A value of 'false' indicates that this network policy 
+             is defined  "
+    REFERENCE 
+            " ANSI/TIA-1057, Section 10.2.3.2"
+    ::= { lldpXMedLocMediaPolicyEntry 5 }
+
+lldpXMedLocMediaPolicyTagged  OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "A value of 'true' indicates that the application is using a 
+             tagged VLAN.
+             A value of 'false' indicates that for the specific application
+             the device either is using an untagged VLAN or does not 
+             support port based VLAN operation.  In this case, both the 
+             VLAN ID and the Layer 2 priority fields are ignored and 
+             only the DSCP value has relevance "
+    REFERENCE 
+            " ANSI/TIA-1057, Section 10.2.3.3"
+    ::= { lldpXMedLocMediaPolicyEntry 6 }
+
+
+
+--- Inventory Information
+--- Local Inventory Information transmitted by an endpoint
+
+lldpXMedLocHardwareRev    OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE (0..32))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The vendor-specific hardware revision string
+            as advertised by the endpoint."
+    REFERENCE 
+            " ANSI/TIA-1057, Section 10.2.6.1"
+    ::= { lldpXMedLocalData 2 }
+
+lldpXMedLocFirmwareRev    OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE (0..32))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The vendor-specific firmware revision string
+            as advertised by the endpoint."
+    REFERENCE 
+            " ANSI/TIA-1057, Section 10.2.6.2"
+    ::= { lldpXMedLocalData 3 }
+
+lldpXMedLocSoftwareRev    OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE (0..32))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The vendor-specific software revision string
+            as advertised by the endpoint."
+    REFERENCE 
+            " ANSI/TIA-1057, Section 10.2.6.3"
+    ::= { lldpXMedLocalData 4 }
+
+lldpXMedLocSerialNum    OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE (0..32))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The vendor-specific serial number
+            as advertised by the endpoint."
+    REFERENCE 
+            " ANSI/TIA-1057, Section 10.2.6.4"
+    ::= { lldpXMedLocalData 5 }
+
+lldpXMedLocMfgName    OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE (0..32))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The vendor-specific manufacturer name
+            as advertised by the endpoint."
+    REFERENCE 
+            " ANSI/TIA-1057, Section 10.2.6.5"
+    ::= { lldpXMedLocalData 6 }
+
+lldpXMedLocModelName    OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE (0..32))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The vendor-specific model name
+            as advertised by the endpoint."
+    REFERENCE 
+            " ANSI/TIA-1057, Section 10.2.6.6"
+    ::= { lldpXMedLocalData 7 }
+
+lldpXMedLocAssetID    OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE (0..32))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The vendor-specific asset tracking identifier
+            as advertised by the endpoint."
+    REFERENCE 
+            " ANSI/TIA-1057, Section 10.2.6.7"
+    ::= { lldpXMedLocalData 8 }
+
+
+
+--- Location Information
+--- Local Location Information transmitted by an endpoint
+--- lldpXMedLocLocationTable - Location Information
+---
+
+lldpXMedLocLocationTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF LldpXMedLocLocationEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "This table contains Location information as advertised
+            by the local system.
+
+            The information may be configured per port by a Location 
+            Information Server (LIS) or other management application. 
+            
+            Multiple Location TLVs of different subtypes may be transmitted
+            in the same PDU.
+
+            The information in this table MUST be stored in non-volatile-memory 
+            and persist over restart/reboot sequences."
+    ::= { lldpXMedLocalData 9 }
+
+lldpXMedLocLocationEntry OBJECT-TYPE
+    SYNTAX      LldpXMedLocLocationEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "Information about Location information for the local device." 
+    INDEX   { lldpLocPortNum, lldpXMedLocLocationSubtype}
+    ::= { lldpXMedLocLocationTable 1 }
+
+LldpXMedLocLocationEntry ::= SEQUENCE {
+              lldpXMedLocLocationSubtype    LocationSubtype,
+              lldpXMedLocLocationInfo       OCTET STRING
+              } 
+
+
+
+lldpXMedLocLocationSubtype OBJECT-TYPE
+    SYNTAX      LocationSubtype
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "The location subtype advertised by the local device."
+    REFERENCE 
+            "ANSI/TIA-1057, Section 10.2.4.2"
+    ::= { lldpXMedLocLocationEntry 1 }
+
+
+lldpXMedLocLocationInfo OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE (0..256))
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "The location information. Parsing of this information is 
+             dependent upon the location subtype, as defined by the value of the 
+             lldpXMedLocLocationSubtype object. "
+    REFERENCE 
+            "ANSI/TIA-1057, Section 10.2.4.3"
+    DEFVAL { "" } 
+    ::= { lldpXMedLocLocationEntry 2 }
+
+--- Extended Power over Ethernet objects
+--- 
+
+lldpXMedLocXPoEDeviceType OBJECT-TYPE
+    SYNTAX      INTEGER  {
+                    unknown(1),
+                    pseDevice(2),
+                    pdDevice(3),
+                    none(4)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Defines the type of Power-via-MDI (Power over Ethernet) advertised
+             by the local device.
+
+             A value pseDevice(2) indicates that the device is advertised as a 
+             Power Sourcing Entity (PSE).
+
+             A value pdDevice(3) indicates that the device is advertised as a 
+             Powered Device (PD).
+
+             A value of none(4) indicates that the device does not support PoE."
+    REFERENCE 
+            "ANSI/TIA-1057, Section 10.2.5.1"
+    ::= { lldpXMedLocalData 10 }
+
+--- Extended PoE - PSE objects
+
+
+
+--- PSE Port Table
+ 
+lldpXMedLocXPoEPSEPortTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF LldpXMedLocXPoEPSEPortEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "This table contains one row per port of PSE PoE
+            information on the local system known to this agent."
+    ::= { lldpXMedLocalData 11 }
+ 
+lldpXMedLocXPoEPSEPortEntry OBJECT-TYPE
+    SYNTAX      LldpXMedLocXPoEPSEPortEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "Information about a particular port PoE information."
+    INDEX   { lldpLocPortNum }
+    ::= { lldpXMedLocXPoEPSEPortTable 1 }
+ 
+LldpXMedLocXPoEPSEPortEntry ::= SEQUENCE {
+              lldpXMedLocXPoEPSEPortPowerAv           Gauge32,
+              lldpXMedLocXPoEPSEPortPDPriority        INTEGER
+} 
+ 
+lldpXMedLocXPoEPSEPortPowerAv  OBJECT-TYPE
+    SYNTAX      Gauge32 (0..1023)
+    UNITS      "tenth of watt"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This object contains the value of the power available from the
+            PSE via this port expressed in units of 0.1 watts."
+    REFERENCE 
+            " ANSI/TIA-1057, Section 10.2.5.4 "
+    ::= { lldpXMedLocXPoEPSEPortEntry 1 }
+ 
+lldpXMedLocXPoEPSEPortPDPriority OBJECT-TYPE
+    SYNTAX      INTEGER  {
+                    unknown(1),
+                    critical(2),
+                    high(3),
+                    low(4)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Reflects the PD power priority that is being advertised on this
+             PSE port.
+
+             If both locally configure priority and 
+             ldpXMedRemXPoEPDPowerPriority are available on this port, it is
+             a matter of local policy which one takes precedence. This object 
+             reflects the active value on this port. 
+ 
+             If the priority is not configured or known by the PD, the value 
+             unknown(1) will be returned. 
+       
+             A value critical(2) indicates that the device advertises its power 
+             Priority as critical, as per RFC 3621.
+ 
+             A value high(3) indicates that the device advertises its power 
+             Priority as high, as per RFC 3621.
+ 
+             A value low(4) indicates that the device advertises its power 
+             Priority as low, as per RFC 3621."
+    REFERENCE 
+            "ANSI/TIA-1057, Section 10.2.5.3"
+    ::= { lldpXMedLocXPoEPSEPortEntry 2 }
+ 
+ 
+
+lldpXMedLocXPoEPSEPowerSource OBJECT-TYPE
+    SYNTAX      INTEGER  {
+                    unknown(1),
+                    primary(2),
+                    backup(3)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Defines the type of PSE Power Source advertised
+             by the local device.
+
+             A value primary(2) indicates that the device advertises its power 
+             source as primary.
+
+             A value backup(3) indicates that the device advertises its power 
+             Source as backup."
+    REFERENCE 
+            "ANSI/TIA-1057, Section 10.2.5.2"
+    ::= { lldpXMedLocalData 12 }
+
+
+--- Extended PoE - PD objects
+
+lldpXMedLocXPoEPDPowerReq  OBJECT-TYPE
+    SYNTAX      Gauge32 (0..1023)
+    UNITS      "tenth of watt" 
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This object contains the value of the power required by a 
+            PD expressed in units of 0.1 watts."
+    REFERENCE 
+            " ANSI/TIA-1057, Section 10.2.4.3 "
+    ::= { lldpXMedLocalData 13 }
+
+lldpXMedLocXPoEPDPowerSource OBJECT-TYPE
+    SYNTAX      INTEGER  {
+                    unknown(1),
+                    fromPSE(2),
+                    local(3),
+                    localAndPSE(4)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Defines the type of Power Source advertised as being used 
+             by the local device.
+
+             A value fromPSE(2) indicates that the device advertises its power 
+             source as received from a PSE.
+
+             A value local(3) indicates that the device advertises its power 
+             source as local.
+
+             A value localAndPSE(4) indicates that the device advertises its 
+             power source as using both local and PSE power."
+    REFERENCE 
+            "ANSI/TIA-1057, Section 10.2.5.2"
+    ::= { lldpXMedLocalData 14 }
+
+lldpXMedLocXPoEPDPowerPriority OBJECT-TYPE
+    SYNTAX      INTEGER  {
+                    unknown(1),
+                    critical(2),
+                    high(3),
+                    low(4)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Defines the priority advertised as being required by this PD.
+
+             A value critical(2) indicates that the device advertises its power 
+             Priority as critical, as per RFC 3621.
+
+             A value high(3) indicates that the device advertises its power 
+             Priority as high, as per RFC 3621.
+
+             A value low(4) indicates that the device advertises its power 
+             Priority as low, as per RFC 3621."
+    REFERENCE 
+            "ANSI/TIA-1057, Section 10.2.5.3"
+    ::= { lldpXMedLocalData 15 }
+
+
+
+------------------------------------------------------------------------------
+-- LLDP-MED  - Remote Devices Information
+------------------------------------------------------------------------------
+
+
+
+-- LLdpXMedRemCapabilitiesTable
+-- this table is read by a manager to determine what capabilities
+-- exists and are enabled on the remote system connected to the port
+ 
+-- The information in this table is based upon the information advertised 
+-- by the remote device and received on each port in the capabilities TLV
+ 
+lldpXMedRemCapabilitiesTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF LldpXMedRemCapabilitiesEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "A table that displays LLDP-MED capabilities of remote devices 
+            connected to individual ports."
+    ::= { lldpXMedRemoteData 1 }
+
+lldpXMedRemCapabilitiesEntry  OBJECT-TYPE
+    SYNTAX      LldpXMedRemCapabilitiesEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "LLDP-MED capabilities of remote devices connected to the device 
+            ports and communicating via LLDP-MED.
+
+            The remote tables in the LLDP-MED MIB excepting this table may be 
+            sparsely populate. An entry in one of these table is meaningful 
+            and shall be populated by the agent only if the corresponding bits
+            for the respective function are set in the objects in this table. "
+    INDEX   { lldpRemTimeMark,
+              lldpRemLocalPortNum,
+              lldpRemIndex }
+    ::= { lldpXMedRemCapabilitiesTable 1 }
+
+LldpXMedRemCapabilitiesEntry ::= SEQUENCE {
+      lldpXMedRemCapSupported  LldpXMedCapabilities,
+      lldpXMedRemCapCurrent    LldpXMedCapabilities,
+      lldpXMedRemDeviceClass   LldpXMedDeviceClass 
+}
+
+lldpXMedRemCapSupported  OBJECT-TYPE
+    SYNTAX      LldpXMedCapabilities
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The bitmap includes the MED organizationally defined set of LLDP
+            TLVs whose transmission is possible on the LLDP agent of the remote
+            device connected to this port. Each bit in the bitmap corresponds
+            to an LLDP-MED subtype associated with a specific TIA TR41.4 MED                
+            optional TLV. If the bit is set, the agent has the capability 
+            to support the corresponding TLV."
+    REFERENCE 
+            "ANSI/TIA-1057, Sections 10.2.2.1"
+    ::= { lldpXMedRemCapabilitiesEntry  1 }
+
+lldpXMedRemCapCurrent  OBJECT-TYPE
+    SYNTAX      LldpXMedCapabilities
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The bitmap includes the MED organizationally defined set of LLDP
+            TLVs whose transmission is possible on the LLDP agent of the remote
+            device connected to this port. Each bit in the bitmap corresponds
+            to an LLDP-MED subtype associated with a specific TIA TR41.4 MED                
+            optional TLV. If the bit is set, the agent currently supports the 
+            corresponding TLV."
+    REFERENCE 
+            "ANSI/TIA-1057, Sections 10.2.2.1"
+    ::= { lldpXMedRemCapabilitiesEntry  2 }
+
+lldpXMedRemDeviceClass    OBJECT-TYPE
+    SYNTAX      LldpXMedDeviceClass
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Device Class as advertised by the device remotely connected to the 
+             port."
+    REFERENCE 
+            " ANSI/TIA-1057, Section 10.2.2.2"
+    ::= { lldpXMedRemCapabilitiesEntry 3 }
+
+
+
+
+---
+---
+--- lldpXMedRemMediaPolicyTable: Media Policy Table
+---
+---
+lldpXMedRemMediaPolicyTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF LldpXMedRemMediaPolicyEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "This table contains media policy information as advertised
+            by the remote system.
+
+            This table may be sparsely populated. Entries in this table are
+            relevant only if the networkPolicy(0) bits in the 
+            lldpXMedRemCapSupported and lldpXMedRemCapCurrent objects of the 
+            corresponding ports are set."
+    ::= { lldpXMedRemoteData 2 }
+
+lldpXMedRemMediaPolicyEntry OBJECT-TYPE
+    SYNTAX      LldpXMedRemMediaPolicyEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "Information about the per port per policy type policy 
+             information for a particular physical network connection."
+    INDEX   { lldpRemTimeMark,
+              lldpRemLocalPortNum,
+              lldpRemIndex, 
+              lldpXMedRemMediaPolicyAppType }
+    ::= { lldpXMedRemMediaPolicyTable 1 }
+ 
+
+LldpXMedRemMediaPolicyEntry ::= SEQUENCE {
+              lldpXMedRemMediaPolicyAppType        PolicyAppType,
+              lldpXMedRemMediaPolicyVlanID         Integer32,
+              lldpXMedRemMediaPolicyPriority       Integer32, 
+              lldpXMedRemMediaPolicyDscp           Dscp,
+              lldpXMedRemMediaPolicyUnknown        TruthValue,
+              lldpXMedRemMediaPolicyTagged         TruthValue
+}
+
+lldpXMedRemMediaPolicyAppType OBJECT-TYPE
+    SYNTAX      PolicyAppType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "The media type that defines the primary function of the
+             application for the policy advertised by the endpoint connected 
+             remotely to this port." 
+    REFERENCE 
+            "ANSI/TIA-1057, Section 10.2.3.1"
+    ::= { lldpXMedRemMediaPolicyEntry 1 }
+
+lldpXMedRemMediaPolicyVlanID  OBJECT-TYPE
+    SYNTAX      Integer32 (0|1..4094|4095)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "An extension of the VLAN Identifier for the remote system
+             connected to this port, as defined in IEEE 802.1P-1998.
+             
+             A value of 1 through 4094 is used to define a valid PVID.
+             
+             A value of 0 shall be used if the device is using priority tagged
+             frames, meaning that only the 802.1p priority level is significant
+             and the default VID of the ingress port is being used instead.
+             
+             A value of 4095 is reserved for implementation use."
+    REFERENCE 
+            " ANSI/TIA-1057, Section 10.2.3.5"
+    ::= { lldpXMedRemMediaPolicyEntry 2 }
+
+lldpXMedRemMediaPolicyPriority  OBJECT-TYPE
+    SYNTAX      Integer32 (0..7)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This object contains the value of the 802.1p priority
+            which is associated with the remote system connected at
+            given port."
+    REFERENCE 
+            " ANSI/TIA-1057, Section 10.2.3.6"
+    ::= { lldpXMedRemMediaPolicyEntry 3 }
+
+lldpXMedRemMediaPolicyDscp  OBJECT-TYPE
+    SYNTAX      Dscp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This object contains the value of the Differentiated Service
+            Code Point (DSCP) as defined in IETF RFC 2474 and RFC 2475
+            which is associated with remote system connected at the port."
+    REFERENCE 
+            " ANSI/TIA-1057, Section 10.2.3.7"
+    ::= { lldpXMedRemMediaPolicyEntry 4 }
+
+lldpXMedRemMediaPolicyUnknown  OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "A value of 'true' indicates that the 
+             network policy for the specified application type is 
+             currently unknown.  In this case, the VLAN ID, the 
+             layer 2 priority and the DSCP value fields are ignored.
+             A value of 'false' indicates that this network policy 
+             is defined."
+    REFERENCE 
+            " ANSI/TIA-1057, Section 10.2.3.2"
+    ::= { lldpXMedRemMediaPolicyEntry 5 }
+
+lldpXMedRemMediaPolicyTagged  OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "A value of 'true' indicates that the application is using a 
+             tagged VLAN.
+             A value of 'false' indicates that for the specific application
+             the device either is using an untagged VLAN or does not 
+             support port based VLAN operation.  In this case, both the 
+             VLAN ID and the Layer 2 priority fields are ignored and 
+             only the DSCP value has relevance "
+    REFERENCE 
+            " ANSI/TIA-1057, Section 10.2.3.3"
+    ::= { lldpXMedRemMediaPolicyEntry 6 }
+
+
+
+
+--- lldpXMedRemInventoryTable - Remote Inventory Information
+--- 
+
+lldpXMedRemInventoryTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF LldpXMedRemInventoryEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "This table contains inventory information as advertised
+            by the remote system.
+            
+            This table may be sparsely populated. Entries in this table are
+            relevant only if the inventory(2) bits in the 
+            lldpXMedRemCapSupported and lldpXMedRemCapCurrent objects of the 
+            corresponding ports are set "
+    ::= { lldpXMedRemoteData 3 }
+
+lldpXMedRemInventoryEntry OBJECT-TYPE
+    SYNTAX      LldpXMedRemInventoryEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "Information about inventory information for the remote devices
+             connected to the ports." 
+    INDEX   { lldpRemTimeMark,
+              lldpRemLocalPortNum,
+              lldpRemIndex }
+    ::= { lldpXMedRemInventoryTable 1 }
+
+LldpXMedRemInventoryEntry ::= SEQUENCE {
+              lldpXMedRemHardwareRev           SnmpAdminString,
+              lldpXMedRemFirmwareRev           SnmpAdminString,
+              lldpXMedRemSoftwareRev           SnmpAdminString,
+              lldpXMedRemSerialNum             SnmpAdminString,
+              lldpXMedRemMfgName               SnmpAdminString,
+              lldpXMedRemModelName             SnmpAdminString,
+              lldpXMedRemAssetID               SnmpAdminString
+              } 
+
+lldpXMedRemHardwareRev    OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE (0..32))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The vendor-specific hardware revision string
+            as advertised by the remote endpoint."
+    REFERENCE 
+            " ANSI/TIA-1057, Section 10.2.6.1"
+    ::= { lldpXMedRemInventoryEntry 1 }
+
+lldpXMedRemFirmwareRev    OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE (0..32))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The vendor-specific firmware revision string
+            as advertised by the remote endpoint."
+    REFERENCE 
+            " ANSI/TIA-1057, Section 10.2.6.2"
+    ::= { lldpXMedRemInventoryEntry 2 }
+
+lldpXMedRemSoftwareRev    OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE (0..32))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The vendor-specific software revision string
+            as advertised by the remote endpoint."
+    REFERENCE 
+            " ANSI/TIA-1057, Section 10.2.6.3"
+    ::= { lldpXMedRemInventoryEntry 3 }
+
+lldpXMedRemSerialNum    OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE (0..32))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The vendor-specific serial number
+            as advertised by the remote endpoint."
+    REFERENCE 
+            " ANSI/TIA-1057, Section 10.2.6.4"
+    ::= { lldpXMedRemInventoryEntry 4 }
+
+lldpXMedRemMfgName    OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE (0..32))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The vendor-specific manufacturer name
+            as advertised by the remote endpoint."
+    REFERENCE 
+            " ANSI/TIA-1057, Section 10.2.6.5"
+    ::= { lldpXMedRemInventoryEntry 5 }
+
+lldpXMedRemModelName    OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE (0..32))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The vendor-specific model name
+            as advertised by the remote endpoint."
+    REFERENCE 
+            " ANSI/TIA-1057, Section 10.2.6.6"
+    ::= { lldpXMedRemInventoryEntry 6 }
+
+lldpXMedRemAssetID    OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE (0..32))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The vendor-specific asset tracking identifier
+            as advertised by the remote endpoint."
+    REFERENCE 
+            " ANSI/TIA-1057, Section 10.2.6.7"
+    ::= { lldpXMedRemInventoryEntry 7 }
+
+
+--- lldpXMedRemLocationTable - Remote Location Information
+---
+
+lldpXMedRemLocationTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF LldpXMedRemLocationEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "This table contains Location information as advertised
+            by the remote system.
+            
+            This table may be sparsely populated. Entries in this table are
+            relevant only if the Location(3) bits in the 
+            lldpXMedRemCapSupported and lldpXMedRemCapCurrent objects of the 
+            corresponding ports are set "
+    ::= { lldpXMedRemoteData 4 }
+
+lldpXMedRemLocationEntry OBJECT-TYPE
+    SYNTAX      LldpXMedRemLocationEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "Information about Location information for the remote devices
+             connected to the ports." 
+    INDEX   { lldpRemTimeMark,
+              lldpRemLocalPortNum,
+              lldpRemIndex,
+              lldpXMedRemLocationSubtype}
+    ::= { lldpXMedRemLocationTable 1 }
+
+LldpXMedRemLocationEntry ::= SEQUENCE {
+              lldpXMedRemLocationSubtype    LocationSubtype,
+              lldpXMedRemLocationInfo       OCTET STRING
+              } 
+
+
+lldpXMedRemLocationSubtype OBJECT-TYPE
+    SYNTAX      LocationSubtype
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "The location subtype advertised by the remote endpoint."
+    REFERENCE 
+            "ANSI/TIA-1057, Section 10.2.4.2 "
+    ::= { lldpXMedRemLocationEntry 1 }
+
+
+lldpXMedRemLocationInfo OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE (0..256))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The location information advertised by the remote endpoint.
+             Parsing of this information is dependent upon the location  
+             subtype, as defined by the value of the corresponding
+             lldpXMedRemLocationSubType object. "
+    REFERENCE 
+            "ANSI/TIA-1057, Section 10.2.4.3 "
+    ::= { lldpXMedRemLocationEntry 2 }
+
+
+--- lldpXMedRemXPoETable - Information about Remote PoE Device Type
+---
+
+lldpXMedRemXPoETable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF LldpXMedRemXPoEEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "This table contains information about the PoE device type
+            as advertised by the remote system.
+            
+            This table is densely populated."
+    ::= { lldpXMedRemoteData 5 }
+
+lldpXMedRemXPoEEntry OBJECT-TYPE
+    SYNTAX      LldpXMedRemXPoEEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "Information about PoE type of the remote devices
+             connected to the ports." 
+    INDEX   { lldpRemTimeMark,
+              lldpRemLocalPortNum,
+              lldpRemIndex }
+    ::= { lldpXMedRemXPoETable 1 }
+
+LldpXMedRemXPoEEntry ::= SEQUENCE {
+              lldpXMedRemXPoEDeviceType    INTEGER 
+              } 
+
+
+lldpXMedRemXPoEDeviceType OBJECT-TYPE
+    SYNTAX      INTEGER  {
+                    unknown(1),
+                    pseDevice(2),
+                    pdDevice(3),
+                    none(4)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Defines the type of Power-via-MDI (Power over Ethernet) advertised
+             by the remote device.
+
+             A value pseDevice(2) indicates that the device is advertised as a 
+             Power Sourcing Entity (PSE).
+
+             A value pdDevice(3) indicates that the device is advertised as a 
+             Powered Device (PD).
+
+             A value none(4) indicates that the device does not support PoE."
+    REFERENCE 
+            "ANSI/TIA-1057, Section 10.2.5.1"
+    ::= { lldpXMedRemXPoEEntry 1 }
+
+
+--- lldpXMedRemXPoEPDTable - Extended PoE PSE Information from the remote device
+---
+
+lldpXMedRemXPoEPSETable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF LldpXMedRemXPoEPSEEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "This table contains extended PoE information as advertised
+            by the remote devices of PSE type.
+            
+            This table may be sparsely populated. Entries in this table are
+            relevant only if the extendedPSE(4) bits in the 
+            lldpXMedRemCapSupported and lldpXMedRemCapCurrent objects of the 
+            corresponding ports are set "
+    ::= { lldpXMedRemoteData 6 }
+
+lldpXMedRemXPoEPSEEntry OBJECT-TYPE
+    SYNTAX      LldpXMedRemXPoEPSEEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "Information about Extended PoE PSE information for 
+            the remote devices connected to the ports." 
+    INDEX   { lldpRemTimeMark,
+              lldpRemLocalPortNum,
+              lldpRemIndex }
+    ::= { lldpXMedRemXPoEPSETable 1 }
+
+LldpXMedRemXPoEPSEEntry ::= SEQUENCE {
+              lldpXMedRemXPoEPSEPowerAv    Gauge32,
+              lldpXMedRemXPoEPSEPowerSource INTEGER,
+              lldpXMedRemXPoEPSEPowerPriority INTEGER
+              } 
+ 
+
+lldpXMedRemXPoEPSEPowerAv  OBJECT-TYPE
+    SYNTAX      Gauge32 (0..1023)
+    UNITS      "tenth of watt"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This object contains the value of the power available from the
+            PSE via this port expressed in units of 0.1 watts on the remote 
+            device."
+    REFERENCE 
+            " ANSI/TIA-1057, Section 10.2.5.4"
+    ::= { lldpXMedRemXPoEPSEEntry 1 }
+
+lldpXMedRemXPoEPSEPowerSource OBJECT-TYPE
+    SYNTAX      INTEGER  {
+                    unknown(1),
+                    primary(2),
+                    backup(3)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Defines the type of PSE Power Source advertised
+             by the remote device.
+
+             A value primary(2) indicates that the device advertises its power 
+             source as primary.
+
+             A value backup(3) indicates that the device advertises its power 
+             Source as backup."
+    REFERENCE 
+            "ANSI/TIA-1057, Section 10.2.5.2"
+    ::= { lldpXMedRemXPoEPSEEntry 2 }
+
+lldpXMedRemXPoEPSEPowerPriority OBJECT-TYPE
+    SYNTAX      INTEGER  {
+                    unknown(1),
+                    critical(2),
+                    high(3),
+                    low(4)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This object contains the value of the PSE power priority 
+            advertised by the remote device.
+            
+            A value critical(2) indicates that the device advertises its power 
+            priority as critical, as per RFC 3621.
+            
+            A value high(3) indicates that the device advertises its power 
+            priority as high, as per RFC 3621.
+            
+            A value low(4) indicates that the device advertises its power 
+            priority as low, as per RFC 3621."
+    REFERENCE 
+            "ANSI/TIA-1057, Section 10.2.5.3"
+    ::= { lldpXMedRemXPoEPSEEntry 3 }
+ 
+ 
+
+
+--- lldpXMedRemXPoEPDTable - Extended PoE PD Information from the remote device
+---
+
+lldpXMedRemXPoEPDTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF LldpXMedRemXPoEPDEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "This table contains extended PoE information as advertised
+            by the remote devices of PD type.
+            
+            This table may be sparsely populated. Entries in this table are
+            relevant only if the extendedPD(5) bits in the 
+            lldpXMedRemCapSupported and lldpXMedRemCapCurrent objects of the 
+            corresponding ports are set "
+    ::= { lldpXMedRemoteData 7 }
+
+lldpXMedRemXPoEPDEntry OBJECT-TYPE
+    SYNTAX      LldpXMedRemXPoEPDEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "Information about XPoEPD information for the remote devices
+             connected to the ports." 
+    INDEX   { lldpRemTimeMark,
+              lldpRemLocalPortNum,
+              lldpRemIndex }
+    ::= { lldpXMedRemXPoEPDTable 1 }
+
+LldpXMedRemXPoEPDEntry ::= SEQUENCE {
+              lldpXMedRemXPoEPDPowerReq       Gauge32,
+              lldpXMedRemXPoEPDPowerSource    INTEGER,
+              lldpXMedRemXPoEPDPowerPriority  INTEGER 
+              } 
+
+
+lldpXMedRemXPoEPDPowerReq  OBJECT-TYPE
+    SYNTAX      Gauge32 (0..1023)
+    UNITS      "tenth of watt" 
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This object contains the value of the power required by a 
+            PD connected remotely to the port
+            expressed in units of 0.1 watts."
+    REFERENCE 
+            " ANSI/TIA-1057, Section 10.2.5.4 "
+    ::= { lldpXMedRemXPoEPDEntry 1 }
+
+lldpXMedRemXPoEPDPowerSource OBJECT-TYPE
+    SYNTAX      INTEGER  {
+                    unknown(1),
+                    fromPSE(2),
+                    local(3),
+                    localAndPSE(4)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Defines the type of Power Source advertised as being used 
+             by the device connected remotely to the port.
+
+             A value fromPSE(2) indicates that the device advertises its power 
+             source as received from a PSE.
+
+             A value local(3) indicates that the device advertises its power 
+             source as local.
+
+             A value localAndPSE(4) indicates that the device advertises its 
+             power source as using both local and PSE power."
+    REFERENCE 
+            "ANSI/TIA-1057, Section 10.2.5.2"
+    ::= { lldpXMedRemXPoEPDEntry 2 }
+
+lldpXMedRemXPoEPDPowerPriority OBJECT-TYPE
+    SYNTAX      INTEGER  {
+                    unknown(1),
+                    critical(2),
+                    high(3),
+                    low(4)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Defines the priority advertised as being required by the PD
+             connected remotely to the port.
+
+             A value critical(2) indicates that the device advertises its power 
+             Priority as critical, as per RFC 3621.
+
+             A value high(3) indicates that the device advertises its power 
+             Priority as high, as per RFC 3621.
+
+             A value low(4) indicates that the device advertises its power 
+             Priority as low, as per RFC 3621."
+    REFERENCE 
+            "ANSI/TIA-1057, Section 10.2.5.3"
+    ::= { lldpXMedRemXPoEPDEntry 3 }
+
+
+
+
+
+
+
+---
+
+
+-- conformance information
+
+lldpXMedConformance OBJECT IDENTIFIER ::= { lldpXMedMIB 2 }
+lldpXMedCompliances OBJECT IDENTIFIER ::= { lldpXMedConformance 1 }
+lldpXMedGroups      OBJECT IDENTIFIER ::= { lldpXMedConformance 2 }
+
+-- compliance statements
+
+lldpXMedCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "The compliance statement for SNMP entities which implement
+            the LLDP MED extension MIB."
+ 
+    MODULE  -- this module
+        MANDATORY-GROUPS { lldpXMedConfigGroup, 
+                           lldpXMedRemSysGroup,
+                           lldpXMedNotificationsGroup
+        }
+        GROUP lldpXMedOptMediaPolicyGroup
+            DESCRIPTION
+                "This group represents the information associated with
+                the LLDP-MED optional Media Policy TLVs, 
+                therefore the agent may not implement them."
+        GROUP lldpXMedOptInventoryGroup
+            DESCRIPTION
+                "This group represents the information associated with
+                the LLDP-MED optional inventory TLVs, 
+                therefore the agent may not implement them."
+        GROUP lldpXMedOptLocationGroup
+            DESCRIPTION
+                "This group represents the information associated with
+                the LLDP-MED optional Location TLVs, 
+                therefore the agent may not implement them."
+        GROUP lldpXMedOptPoEPSEGroup
+            DESCRIPTION
+                "This group represents the information associated with
+                the LLDP-MED optional extended PoE PolicyTLVs, carrying
+                PSE information, therefore the agent may
+                not implement them."
+       GROUP lldpXMedOptPoEPDGroup
+            DESCRIPTION
+                " This group represents the information associated with
+                the LLDP-MED optional extended PoE Policy TLVs, carrying
+                PD information, therefore the agent may
+                not implement them."
+    ::= { lldpXMedCompliances 1 }
+
+-- MIB groupings
+
+lldpXMedConfigGroup    OBJECT-GROUP
+    OBJECTS {
+        lldpXMedPortCapSupported, 
+        lldpXMedPortConfigTLVsTxEnable,
+        lldpXMedPortConfigNotifEnable, 
+        lldpXMedFastStartRepeatCount,
+        lldpXMedLocXPoEDeviceType,
+        lldpXMedLocDeviceClass
+    }
+    STATUS  current
+    DESCRIPTION
+            "The collection of objects which are used to configure or
+            describe the configuration or behavior of the LLDP-MED
+            organizational extension implementation."
+    ::= { lldpXMedGroups 1 }
+
+lldpXMedOptMediaPolicyGroup  OBJECT-GROUP
+    OBJECTS {
+        lldpXMedLocMediaPolicyVlanID, 
+        lldpXMedLocMediaPolicyPriority, 
+        lldpXMedLocMediaPolicyDscp,
+        lldpXMedLocMediaPolicyUnknown,
+        lldpXMedLocMediaPolicyTagged  
+        }
+    STATUS  current
+    DESCRIPTION
+            "The collection of objects which are used to represent LLDP
+            MED organizational extensions for Media Policy Information."
+    ::= { lldpXMedGroups 2 }
+
+
+
+lldpXMedOptInventoryGroup  OBJECT-GROUP
+    OBJECTS {
+        lldpXMedLocHardwareRev, 
+        lldpXMedLocFirmwareRev, 
+        lldpXMedLocSoftwareRev, 
+        lldpXMedLocSerialNum,
+        lldpXMedLocMfgName,
+        lldpXMedLocModelName,
+        lldpXMedLocAssetID
+        }
+    STATUS  current
+    DESCRIPTION
+            "The collection of objects which are used to represent LLDP
+            MED organizational extension for inventory Information."
+    ::= { lldpXMedGroups 3 }
+lldpXMedOptLocationGroup  OBJECT-GROUP
+    OBJECTS {
+        lldpXMedLocLocationInfo 
+        }
+    STATUS  current
+    DESCRIPTION
+            "The collection of objects which are used to represent LLDP
+            MED organizational extension for Location Information."
+    ::= { lldpXMedGroups 4 }
+
+
+lldpXMedOptPoEPSEGroup  OBJECT-GROUP
+    OBJECTS {
+        lldpXMedLocXPoEPSEPortPowerAv,
+        lldpXMedLocXPoEPSEPortPDPriority, 
+        lldpXMedLocXPoEPSEPowerSource 
+        } 
+    STATUS  current
+    DESCRIPTION
+            "The collection of objects which are used to represent LLDP
+            MED organizational extensions for PoE PSE Information."
+    ::= { lldpXMedGroups 5 }
+
+lldpXMedOptPoEPDGroup  OBJECT-GROUP
+    OBJECTS {
+        lldpXMedLocXPoEPDPowerReq, 
+        lldpXMedLocXPoEPDPowerSource, 
+        lldpXMedLocXPoEPDPowerPriority
+        }
+    STATUS  current
+    DESCRIPTION
+            "The collection of objects which are used to represent LLDP
+            MED organizational extensions for PoE PD Information."
+    ::= { lldpXMedGroups 6 }
+
+lldpXMedRemSysGroup  OBJECT-GROUP
+    OBJECTS {
+        lldpXMedRemCapSupported,
+        lldpXMedRemCapCurrent,
+        lldpXMedRemDeviceClass,
+        lldpXMedRemMediaPolicyVlanID,
+        lldpXMedRemMediaPolicyPriority,
+        lldpXMedRemMediaPolicyDscp,
+        lldpXMedRemMediaPolicyUnknown,
+        lldpXMedRemMediaPolicyTagged,  
+        lldpXMedRemHardwareRev,
+        lldpXMedRemFirmwareRev,
+        lldpXMedRemSoftwareRev,
+        lldpXMedRemSerialNum,
+        lldpXMedRemMfgName,
+        lldpXMedRemModelName,
+        lldpXMedRemAssetID,
+        lldpXMedRemLocationInfo,
+        lldpXMedRemXPoEDeviceType,
+        lldpXMedRemXPoEPSEPowerAv,
+        lldpXMedRemXPoEPSEPowerSource,
+        lldpXMedRemXPoEPSEPowerPriority,
+        lldpXMedRemXPoEPDPowerReq,
+        lldpXMedRemXPoEPDPowerSource,
+        lldpXMedRemXPoEPDPowerPriority 
+    }
+     STATUS  current
+    DESCRIPTION
+            "The collection of objects which are used to represent LLDP-
+            MED organizational extension Remote Device Information."
+    ::= { lldpXMedGroups 7 }
+
+
+-- LLDP MED Extension Notifications
+-- Transmission of LLDP MED Extension Notification is controlled by the
+-- lldpNotificationInterval object in the LLDP MIB defined in
+-- IEEE 802.1AB-2005
+
+lldpXMedTopologyChangeDetected NOTIFICATION-TYPE
+     OBJECTS { lldpRemChassisIdSubtype,
+               lldpRemChassisId,
+               lldpXMedRemDeviceClass
+               }
+           STATUS current
+DESCRIPTION
+               "A notification generated by the local device sensing
+                a change in the topology that indicates that a new remote
+                device attached to a local port, or a remote device disconnected
+                or moved from one port to another."
+           ::= { lldpXMedNotifications 1 }
+
+
+
+lldpXMedNotificationsGroup NOTIFICATION-GROUP
+     NOTIFICATIONS { lldpXMedTopologyChangeDetected }
+     STATUS current
+     DESCRIPTION
+           "Notifications sent by an LLDP-MED agent."
+           ::= { lldpXMedGroups 8 }
+
+
+
+
+END