diff options
| author | David Leutgeb <david.leutgeb@mannundmouse.com> | 2023-12-05 12:25:34 +0100 |
|---|---|---|
| committer | David Leutgeb <david.leutgeb@mannundmouse.com> | 2023-12-05 12:25:34 +0100 |
| commit | 98a672123c7872f6b9b75a9a2b6bb3aea504de6a (patch) | |
| tree | 9b13bd7f563c3198047bd359195327cf28b3caf0 /MIBS/cambium/cnmatrix/ARICENT-ISS-MIB | |
| download | mibs-main.tar.gz mibs-main.zip | |
Diffstat (limited to 'MIBS/cambium/cnmatrix/ARICENT-ISS-MIB')
| -rw-r--r-- | MIBS/cambium/cnmatrix/ARICENT-ISS-MIB | 5052 |
1 files changed, 5052 insertions, 0 deletions
diff --git a/MIBS/cambium/cnmatrix/ARICENT-ISS-MIB b/MIBS/cambium/cnmatrix/ARICENT-ISS-MIB new file mode 100644 index 0000000..cc0cfff --- /dev/null +++ b/MIBS/cambium/cnmatrix/ARICENT-ISS-MIB @@ -0,0 +1,5052 @@ +-- Copyright (C) 2006-2012 Aricent Group . All Rights Reserved + +ARICENT-ISS-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, + Counter32,enterprises, IpAddress, Integer32, Unsigned32, NOTIFICATION-TYPE + FROM SNMPv2-SMI + InterfaceIndex FROM IF-MIB + RowStatus, TruthValue, DisplayString, + TEXTUAL-CONVENTION, MacAddress, StorageType FROM SNMPv2-TC + InetAddress, InetAddressType FROM INET-ADDRESS-MIB; + + iss MODULE-IDENTITY + LAST-UPDATED "202203310000Z" + ORGANIZATION "ARICENT COMMUNICATIONS SOFTWARE" + CONTACT-INFO "support@aricent.com" + DESCRIPTION + "The MIB for ISS." + + REVISION "202203310000Z" + DESCRIPTION + "The object issPortCtrlForceSpeed was added" + + REVISION "202201210000Z" + DESCRIPTION + "Was added object issHttpMaxSessions for setting HTTP max sessions" + + REVISION "202201120000Z" + DESCRIPTION + "The default value of MIB 'issLoginLockTime' was changed from 30 to 600." + + REVISION "201209050000Z" + DESCRIPTION + "The MIB for ISS." + + ::= { enterprises futuresoftware (2076) 81 } + + +PortList ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Each octet within this value specifies a set of eight + ports, with the first octet specifying ports 1 through + 8, the second octet specifying ports 9 through 16, etc. + Within each octet, the most significant bit represents + the lowest numbered port, and the least significant bit + represents the highest numbered port. Thus, each port + of the bridge is represented by a single bit within the + value of this object. If that bit has a value of '1' + then that port is included in the set of ports; the port + is not included if its bit has a value of '0'." + SYNTAX OCTET STRING + + +-- ----------------------------------------------------------------- -- +-- groups in the MIB +-- ----------------------------------------------------------------- -- + + issNotifications OBJECT IDENTIFIER ::= { iss 0 } + issSystem OBJECT IDENTIFIER ::= { iss 1 } + issConfigControl OBJECT IDENTIFIER ::= { iss 2 } + issMirror OBJECT IDENTIFIER ::= { iss 3 } + issRateControl OBJECT IDENTIFIER ::= { iss 4 } + issL2Filter OBJECT IDENTIFIER ::= { iss 5 } + issL3Filter OBJECT IDENTIFIER ::= { iss 6 } + issIpAuthMgr OBJECT IDENTIFIER ::= { iss 7 } + issExt OBJECT IDENTIFIER ::= { iss 8 } + issL4Switching OBJECT IDENTIFIER ::= { iss 9 } + issSystemTrap OBJECT IDENTIFIER ::= { iss 10 } + issAuditTrap OBJECT IDENTIFIER ::= { iss 11 } + issModule OBJECT IDENTIFIER ::= { iss 12 } + issSwitchFan OBJECT IDENTIFIER ::= { iss 13 } + issAclNp OBJECT IDENTIFIER ::= { iss 14 } + issAclTrafficControl OBJECT IDENTIFIER ::= { iss 15 } + issLogTrap OBJECT IDENTIFIER ::= { iss 16 } + issHealthCheckGroup OBJECT IDENTIFIER ::= { iss 17 } + +-- ---------------------------------------------------------------- -- + +-- System Group + +-- System Information + +issSwitchName OBJECT-TYPE + SYNTAX DisplayString (SIZE(1..15)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "System name used for identification of the device." + DEFVAL { "ISS" } + ::= { issSystem 1 } +issHardwareVersion OBJECT-TYPE + SYNTAX DisplayString (SIZE(1..15)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Version number of the Hardware." + DEFVAL { "" } + ::= { issSystem 2 } +issFirmwareVersion OBJECT-TYPE + SYNTAX DisplayString (SIZE(1..15)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Version number of the Firmware." + DEFVAL { "" } + ::= { issSystem 3 } + +issDefaultIpAddrCfgMode OBJECT-TYPE + SYNTAX INTEGER { + manual(1), + dynamic(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies the means by which the default interface in the device + gets the IP address. + + If 'manual' mode is selected, the default interface takes the + 'issDefaultIpAddr' configured in the system. + + If 'dynamic' mode is selected, the default interface gets the IP address + through dynamic IP address configuration protocols such as RARP client, + BootP client, DHCP Client, etc. + + If the system fails to get the IP address dynamically through all the + above protocols, the default interface uses the 'issDefaultIpAddr' + configured in the system." + DEFVAL { manual } + ::= { issSystem 4 } + +issDefaultIpAddr OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Default IP Address of the system. + + This IP address, if modified, will take effect only when the + configuration is stored & restored." + ::= { issSystem 5 } + +issDefaultIpSubnetMask OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "IP subnet mask for the default IP address. + + This subnet mask, if modified, will take effect only when the + configuration is stored & restored." + ::= { issSystem 6 } + +issEffectiveIpAddr OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "Effective IP address of the switch to be used for contacting + through SNMP interface or web interface. + + This IP address will be same as the default IP address if the + device fails to get the IP address dynamically or the + 'DefaultIpAddrCfgMode' is 'manual'. + + This IP address will be different from the default IP address + if the device manages to get the IP address dynamically. + + In either condition, this is the effective IP address to be + used for contacting the switch." + ::= { issSystem 7 } + +issDefaultInterface OBJECT-TYPE + SYNTAX DisplayString (SIZE(1..24)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Name of the default interface that can be used for + communicating with the system for configuration through SNMP + or WebInterface. + + The default interface, if modified, will take effect only when + the configuration is stored & restored." + DEFVAL { "eth0" } + ::= { issSystem 8 } + +issRestart OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object allows the user to restart the Switch + (i.e)the entire switch will operationally go down and + start again. Setting a value of 'true' causes the switch + to be restarted. + + When the switch operationally goes down, configuration + save operation is initiated based on the configuration save + option chosen. + + When the switch operationally come up, the saved configurations + are restored based on the restore option chosen. + + Once the switch is restarted, the value of this object reverts + to 'false'." + DEFVAL { false } + ::= { issSystem 9 } + +-- Configurtion Save related configuration / information + +issConfigSaveOption OBJECT-TYPE + SYNTAX INTEGER { + noSave(1), + flashSave(2), + remoteSave(3), + startupConfig(4) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies whether the configurations of the switch has to be + saved or not. + + The value 'noSave' specifies that the configurations need + not be saved. + + The value 'flashSave' specifies that the configurations need + to be saved in flash in the specified file name issConfigSaveFileName. + + The value 'remoteSave' specifies that the configurations need + to be saved in specified remote system. + + The value 'startupConfig' specifies that the configurations need + to be saved in flash in the 'Startup Configuration File'. + + When the issConfigIncrSaveFlag and the issConfigAutoSaveTrigger are set + as true then the default value of issConfigSaveOption is startupConfig. + When issConfigIncrSaveFlag is set as false or when + issConfigAutoSaveTrigger is set as false then the default value of + issConfigSaveOption is noSave." + DEFVAL { noSave } + ::= { issSystem 10 } + +issConfigSaveIpAddr OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "IP Address of the remote system to which the switch + configurations have to be saved. + + This object is valid only if 'issConfigSaveOption' is chosen to be + 'remoteSave'. This object is deprecated, as this object supports only + IPv4, this IP can be set through issConfigSaveIpvxAddr object and object + issConfigSaveIpvxAddrType will be set to 1 i.e. IPv4" + ::= { issSystem 11 } + +issConfigSaveFileName OBJECT-TYPE + SYNTAX DisplayString (SIZE(1..128)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Name of the file in which the switch configurations are + to be saved. + + This object is valid only if 'issConfigSaveOption' is chosen + to be 'flashSave' or 'remoteSave'." + DEFVAL { "iss.conf" } + ::= { issSystem 12 } + +issInitiateConfigSave OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "When set as 'true' switch configurations save operation is + initiated. + As soon as the configuration save operation is completed, the value + of this object reverts back to 'false'. + + All the configurations made via the three interfaces + viz. + -> commandline interface + -> Web Interface + -> SNMP interface + are saved either in 'Startup Configuration File' in the flash or + in the specified 'issConfigSaveFileName' in the flash or + in the chosen remote system, depending upon 'ConfigSaveOption'." + DEFVAL { false } + ::= { issSystem 13 } + +issConfigSaveStatus OBJECT-TYPE + SYNTAX INTEGER { + saveInProgress(1), + saveSuccessful(2), + saveFailed(3), + notInitiated(4) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Status of configuration save operation." + DEFVAL { notInitiated } + ::= { issSystem 14 } + + +-- Configuration Restoration related configuration / information + +issConfigRestoreOption OBJECT-TYPE + SYNTAX INTEGER { + noRestore(1), + restore(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies whether the switch configurations have to be restored + or not. + + The value 'noRestore' specifies that the switch configurations + need not be restored when the system is restarted. + + The value 'restore' specifies that the configurations + need to be restored from the 'Startup Configuration File' in the flash + when the system is restarted." + DEFVAL { noRestore } + ::= { issSystem 15 } + +issConfigRestoreIpAddr OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "IP Address of the remote system from where the switch configurations + have to be downloaded to the 'Startup Configuration File' in the flash. + This object is deprecated, as this object supports only IPv4, + this IP can be set through issConfigRestoreIpvxAddr object and object + issConfigRestoreAddrType will be set to 1 i.e. IPv4" + ::= { issSystem 16 } + +issConfigRestoreFileName OBJECT-TYPE + SYNTAX DisplayString (SIZE(1..128)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The configuration file name in the remote system which has to be + downloaded to the 'Startup Configuration File' in the flash." + DEFVAL { "iss.conf" } + ::= { issSystem 17 } + +issInitiateConfigRestore OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "When set as 'true', the switch configurations will be downloaded + from the specified remote system to the 'Startup Configuration File' + in the flash. + + As soon as the configuration download operation is completed, the value + of this object reverts back to 'false'." + + DEFVAL { false } + ::= { issSystem 18 } + + +issConfigRestoreStatus OBJECT-TYPE + SYNTAX INTEGER { + restoreInprogress(1), + restoreSuccessful(2), + restoreFailed(3), + notInitiated(4) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The status of the switch configuration restore operation." + DEFVAL { notInitiated } + ::= { issSystem 19 } + + +-- Image Downloading related configuration / information + +issDlImageFromIp OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "The Ip Address of machine from where the image has to be downloaded. + This object is deprecated, as this object supports only + IPv4, this IP can be set through issDlImageFromIpvxAddr object and object + issDlImageFromIpAddrType will be set to 1 i.e. IPv4" + ::= { issSystem 20 } + +issDlImageName OBJECT-TYPE + SYNTAX DisplayString (SIZE(1..128)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The image name which is to be downloaded to the switch." + DEFVAL { "iss.exe" } + ::= { issSystem 21 } + +issInitiateDlImage OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Initiates the Image Download operation." + ::= { issSystem 22 } + + + +-- Event logging related configuration / information + +issLoggingOption OBJECT-TYPE + SYNTAX INTEGER { + console(1), + file(2), + flash(3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The Logging option specifying whether the logging is to be + done at console or to a file(system buffer) in the system. + Flash specifies the logging of traces into a file." + DEFVAL { console } + ::= { issSystem 23 } + +issUploadLogFileToIp OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "The Ip Address of machine to which the log file is to be uploaded. + This object is deprecated, as this object supports only + IPv4, this IP can be set through issUploadLogFileToIpvxAddr object and + object issUploadLogFileToAddrType will be set to 1 i.e. IPv4" + ::= { issSystem 24 } + +issLogFileName OBJECT-TYPE + SYNTAX DisplayString (SIZE(1..128)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The file name to be used for uploading the logs from 'file' to the + remote system. + + This object is useful only when the 'LogOption' is chosen as 'file'." + DEFVAL { "iss.log" } + ::= { issSystem 25 } + +issInitiateUlLogFile OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Initiates uploading of Log File to the specified IP address in + 'issUploadLogFileToIp'. + + The logs will be uploaded in the specified 'issLogFileName'." + ::= { issSystem 26 } + +-- Remote save status + +issRemoteSaveStatus OBJECT-TYPE + SYNTAX INTEGER { + inprogress(1), + successful(2), + failed(3), + notInitiated(4) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Status of remote save operation. + + The remote save operation could be a + a) configuration file save to remote system + b) log file upload to remote system." + DEFVAL { notInitiated } + ::= { issSystem 27 } + +-- Download status + +issDownloadStatus OBJECT-TYPE + SYNTAX INTEGER { + inprogress(1), + successful(2), + failed(3), + configDefaultNeeded(4), + configDefaultInProgress(5), + configDeafultAborted(6), + notInitiated(7) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The status of the Image download operation to the switch." + DEFVAL { notInitiated } + ::= { issSystem 28 } + +issSysContact OBJECT-TYPE + SYNTAX DisplayString (SIZE(1..50)) + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "The textual identification of the contact person for this + managed node, together with information on how to contact + this person. If no contact information is known, the value + is the zero-length string." + ::= { issSystem 29 } + +issSysLocation OBJECT-TYPE + SYNTAX DisplayString (SIZE(1..50)) + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "The physical location of this node (e.g., `telephone + closet, 3rd floor'). If the location is unknown, the value + is the zero-length string." + ::= { issSystem 30 } + +-- Login Authentication mechanism + +issLoginAuthentication OBJECT-TYPE + SYNTAX INTEGER { + local(1), + remoteRadius(2), + remoteTacacs(3), + radiusFallbackToLocal(4), + tacacsFallbackToLocal(5), + ldap(6) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Configures the mechanism by which the user login has to be authenticated + for accessing the GUI to manage the switch. Authentication is done + either locally or in the remote side through a RADIUS Server or TACACS. + If Authentication is configured as radiusLocal or tacacsLocal then + Local authentication provides a back door or a secondary option + for authentication if the server fails." + + DEFVAL { local } + ::= { issSystem 31 } + +issSwitchBaseMacAddress OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Ethernet address (base address) of the Switch. + This base Mac Address, if modified, will take effect only when the + Switch is restarted." + + DEFVAL { '000102030405'h } + ::= { issSystem 32 } + + + +-- OOB Interface Existence + +issOOBInterface OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates wheteher OOB Interface Exists in the System" + ::= { issSystem 33 } + + + + issSwitchDate OBJECT-TYPE + SYNTAX DisplayString (SIZE(1..40)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + + " The date is configured in the switch in the format, + Hours:Minutes:Seconds Day Month Year + e.g 19:10:31 11 08 2005 + + 01-12 Month - beginning from January to December + The railway time 00 to 24 hours can be configured and + displayed. + The Display of the date is in the format , + WeekDay Month Day Hours:Minutes:Seconds Year + e.g 04 09 21 18:11:30 2005 + + 01-07 WeekDay - beginning from Sunday to Saturday + 01-12 Month - beginning from January to December " + + ::= { issSystem 34 } + +issNoCliConsole OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Indicates whether the CLI console prompt will be made available + to the user for the session through serial console. When set to + TRUE CLI prompt will be available in serial console, when set to + FALSE CLI prompt will NOT be available in serial console session, + for the value to take effect, the switch must be restarted, + the value does not affect the availability of ISS CLI prompt in + sessions established through Telnet." + ::= { issSystem 35 } + +issDefaultIpAddrAllocProtocol OBJECT-TYPE + SYNTAX INTEGER { + rarp(1), + dhcp(2), + bootp(3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies the protocol to be used to obtain IP address for this + interface. This object is valid only when issDefaultIpAddrCfgMode + is set to dynamic (2). Currently rarp (1) option is not supported." + DEFVAL { dhcp } + ::= { issSystem 36 } + +issHttpPort OBJECT-TYPE + SYNTAX Integer32 (0..65535) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The port to be used by the hosts/PC to configure ISS using the Web Interface. + The HTTP server must be disabled before this configuration is done" + DEFVAL { 80 } + + ::= { issSystem 37 } + +issHttpStatus OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object is for enabling or disabling HTTP in the system." + + DEFVAL { enable } + ::= { issSystem 38 } + +issConfigRestoreFileVersion OBJECT-TYPE + SYNTAX DisplayString (SIZE(1..12)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Config Restoration file version. This version will be compared in each + reboot against version stored in restoration file. Restoration + will occur only if the first field in restoration file is this OID and the + RestoreFileVersion value also matches." + ::= { issSystem 39 } + +issDefaultRmIfName OBJECT-TYPE + SYNTAX DisplayString (SIZE(1..23)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Name of the default RM interface that can be used for + communication between the Active and Standby nodes for + providing redundancy support.The default RM interface, + if modified, will take effect only when the switch is + restarted" + DEFVAL { "NONE" } + ::= { issSystem 40 } + +issDefaultVlanId OBJECT-TYPE + SYNTAX Integer32 (1..4094) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The Default VLAN Identifier to be used at system startup. + The VLAN Module creates this vlan as the default vlan. + The Default VLAN Identifier, if modified, will take effect + only when the switch is restarted. + + It is not advisable to change the default VLAN ID when some + configurations are already saved. + + Once the Default VLAN Id is configured, the switch has to + be restarted before saving any configuration. + " + DEFVAL { 1 } + ::= { issSystem 41 } + +issNpapiMode OBJECT-TYPE + SYNTAX DisplayString (SIZE(1..15)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The Mode of NPAPI Processing. It can be + 1. Synchronous, 2. Asynchronous." + DEFVAL { "Synchronous" } + ::= { issSystem 42 } + + +issConfigAutoSaveTrigger OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "When set as 'true', automatic save operation is enabled. i.e., every + configuration is saved automatically. + When set as 'false', automatic save operation is disabled. i.e., + configuration done will not be save automatically. + IncrSave is ON : auto save can be enabled /disabled in the system. + IncrSave is OFF : auto save can be enabled /disabled in the system, + No effect in the system behaviour(in this case no + update trigger is generated towards MSR). + ============================================================================ + issConfig issConfig + incrSaveFlag AutoSaveOption Behaviour + ============================================================================ + TRUE TRUE Data is added to RB Tree and based on save option + data is added to remote/local incremental file. + + TRUE FALSE Data is added to RB tree only. + + FALSE xx in this case no update trigger is generated towards + MSR. + ============================================================================ + + To enable issConfigAutoSaveTrigger, the issConfigIncrSaveFlag has to be + enabled. + The configuration update to issConfigIncrSaveFlag will become applicable + only after switch restart. + When issConfigIncrSaveFlag is enabled, the configuration of + issConfigAutoSaveTrigger will be immediately reflected in the system. + + " + + DEFVAL { false } + ::= { issSystem 43 } + +issConfigIncrSaveFlag OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Indicates whether SNMP Update Trigger for Incremental Save shall be generated or not. + 'True' value implies that the update trigger shall be generated each time a nmhSet + operation is successful. + 'False' value implies that the update trigger shall not be generated at all. + + Following table explains the combinations of various configurations + ============================================================================ + issConfig issConfig issConfig + IncrSaveFlag AutoSaveTrigger SaveOption Behaviour + ============================================================================ + TRUE TRUE Remote Save tftp to remote (on every update trigger) + TRUE FALSE Remote Save tftp to remote (operator triggered) + FALSE xx Remote Save tftp to remote (operator triggered) + TRUE TRUE Flash Save save to local (on every update trigger) + TRUE FALSE Flash Save save to local (operator triggered) + FALSE xx Flash Save save to local (operator triggered) + TRUE TRUE No Save Data added to RB Tree + TRUE FALSE No Save Data added to RB Tree + FALSE xx No Save No Update trigger is sent to MSR + ============================================================================ + + The configuration of the issConfigIncrSaveFlag object from true to false + or vice versa will be used only after switch restart. + + As the auto save of configurations cannot be used when the + issConfigIncrSaveFlag is set to false, the issConfigAutoSaveTrigger + has to be set to false before setting the issConfigIncrSaveFlag + to false." + DEFVAL { false } + ::= { issSystem 44 } + + +issConfigRollbackFlag OBJECT-TYPE + SYNTAX INTEGER { + disabled(1), + enabled(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Indicates whether SNMP Rollback feature is enabled or disabled. + + 'enabled' value implies that failure in set operation for any varbind will result in rollback of all varbinds whose value has been set in this SET PDU + + 'disabled' value implies that failure in set operation will simply return error." + DEFVAL { enabled } + ::= { issSystem 45 } + +issConfigSyncUpOperation OBJECT-TYPE + SYNTAX INTEGER { + syncup(1) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Indicates that sync operation is to be performed. + Incremental save OFF: RB tree, incremental file/buffer are not present in + the system, sync operation is not allowed in the system. + Incremental save ON : On receiving this event, MSR deletes the data present + in the RB tree and configuration data at MSR shall be + made In sync with data store at protocols. + + Following table explains the combinations of various configurations + ============================================================================ + issConfig issConfig + IncrSaveFlag SaveOption Behaviour + ============================================================================ + TRUE Remote Save RB Tree data made in sync with the data stored + at protocols, same data Is updated at remote + system, incremental file (at remote) is emptied. + + TRUE Local Save RB Tree data made in sync with the data stored at + protocols, same data Is updated in local + configuration file and incremental file + (issinc.conf) is emptied. + + FALSE xx Event is not allowed in the system, + MSR returns failure. + ============================================================================" + + DEFVAL { syncup } + ::= { issSystem 46 } + +issFrontPanelPortCount OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The object defines the number of physical ports configured + in a device for the purpose of switching/routing. The value + of the object should not exceed system defined MAX physical + interfaces, when the configured value is less than the MAX + physical interfaces, the difference in port count shall be + used for stacking purpose only when the stacking object + issColdStandbyStacking is enabled else the ports are considered + as physically not present and would not be initialized. + + It is not advisable to change the Front panel port count when some + configurations are already saved. + + Once the Front panel port count is configured, the switch has to + be restarted before saving any configuration." + + ::= { issSystem 47 } + +issAuditLogStatus OBJECT-TYPE + SYNTAX INTEGER { enable (1) , disable(2) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "To Enable or disable Audit Logging" + DEFVAL { disable } + + ::= { issSystem 48 } + +issAuditLogFileName OBJECT-TYPE + SYNTAX DisplayString (SIZE(1..128)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The name of the file to which Audit log is saved" + DEFVAL { "config.txt" } + + ::= { issSystem 49 } + +issAuditLogFileSize OBJECT-TYPE + SYNTAX Unsigned32 (1024 .. 1048576) + MAX-ACCESS read-write + STATUS current + DESCRIPTION "This is the maximum file size in bytes of the config.txt file" + DEFVAL { 1048576 } + + ::= { issSystem 50 } +issAuditLogReset OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Setting this to true ,erases the contents in configs.txt + fileand start logging" + DEFVAL { false } + ::= { issSystem 51 } + +issAuditLogRemoteIpAddr OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION "IP Address of the remote system to which the + Audit file has to be transfered from flash. + This object is deprecated, as this object supports only + IPv4, this IP can be set through issAuditLogRemoteIpvxAddr object + and object issAuditLogRemoteAddrType will be set to 1 i.e. IPv4" + ::= { issSystem 52 } + +issAuditLogInitiateTransfer OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Setting this will start transfer of the file indicated by + issAuditLogFileName from flash + to remote Address mentioned by issAuditLogRemoteIpAddr" + DEFVAL { false } + ::= { issSystem 53 } +issAuditTransferFileName OBJECT-TYPE + SYNTAX DisplayString (SIZE(0..128)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The name of the file to be retrieved from flash" + DEFVAL { "config.txt" } + + ::= { issSystem 54 } + +issDownLoadTransferMode OBJECT-TYPE + SYNTAX INTEGER { + tftp (1), + sftp (2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "To select the Transfer mode for downloading image." + DEFVAL { tftp } + ::= { issSystem 55 } + +issDownLoadUserName OBJECT-TYPE + SYNTAX DisplayString (SIZE(0..20)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This mib-object is used for setting User name required for downloading + image. When Transfer Mode is selected as tftp, contents of this + mib-object becomes irrelevant." + ::= { issSystem 56 } + +issDownLoadPassword OBJECT-TYPE +SYNTAX DisplayString (SIZE(0..20)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This mib-object is used for setting password required for downloading + image. When Transfer Mode is selected as tftp, contents of this + mib-object becomes irrelevant." + ::= { issSystem 57 } + +issUploadLogTransferMode OBJECT-TYPE + SYNTAX INTEGER { + tftp (1), + sftp (2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "To select the Transfer mode for uploading log file." + DEFVAL { tftp } + ::= { issSystem 58 } + + +issUploadLogUserName OBJECT-TYPE + SYNTAX DisplayString (SIZE(0..20)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This mib-object is used for setting User name required for uploading + log file. When Transfer Mode is selected as tftp, contents of this + mib-object becomes irrelevant." + ::= { issSystem 59 } + +issUploadLogPasswd OBJECT-TYPE + SYNTAX DisplayString (SIZE(0..20)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This mib-object is used for setting password required for uploading log file. + When Transfer Mode is selected as tftp, contents of this mib-object becomes + irrelevant." + ::= { issSystem 60 } + +issConfigSaveTransferMode OBJECT-TYPE + SYNTAX INTEGER { + tftp (1), + sftp (2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "To select the Transfer mode for saving the configurations on to a + remote system. Contents of this mib is relevant only when + issConfigSaveOption is remote save." + DEFVAL { tftp } + ::= { issSystem 61 } + +issConfigSaveUserName OBJECT-TYPE + SYNTAX DisplayString (SIZE(0..20)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This mib-object is used for setting User name required for saving + configurations onto a remote site. Contents of this mib is relevant only + when issConfigSaveOption is remote save and issConfigSaveTransferMode is + SFTP." + ::= { issSystem 62 } + +issConfigSavePassword OBJECT-TYPE + SYNTAX DisplayString (SIZE(0..20)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This mib-object is used for setting Password required for saving + configurations onto a remote site. Contents of this mib is relevant + only when the value of issConfigSaveOption is remote save and + issConfigSaveTransferMode is SFTP." + ::= { issSystem 63 } + +issSwitchMinThresholdTemperature OBJECT-TYPE + SYNTAX Integer32 (-15..30) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Indicates the minimum threshold temperature of the switch in celsius. + When the current temperature drops below the threshold, + an SNMP trap with maximum severity will be sent to the manager." + + DEFVAL { 10 } + ::= { issSystem 64 } + +issSwitchMaxThresholdTemperature OBJECT-TYPE + SYNTAX Integer32 (35..40) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Indicates the maximum threshold temperature of the switch in celsius. + When the current temperature rises above the threshold, + an SNMP trap with maximum severity will be sent to the manager." + + DEFVAL { 40 } + ::= { issSystem 65 } + +issSwitchCurrentTemperature OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the current temperature of the switch in celsius." + + ::= { issSystem 66 } + +issSwitchMaxCPUThreshold OBJECT-TYPE + SYNTAX Integer32 (1..100) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Indicates the maximum CPU usage of the switch in percentage. + When CPU load exceeds the threshold value, + an SNMP trap with maximum severity will be sent to the manager." + + DEFVAL { 95 } + ::= { issSystem 67 } + +issSwitchCurrentCPUThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the current CPU threshold of the switch in percentage" + + ::= { issSystem 68 } + +issSwitchPowerSurge OBJECT-TYPE + SYNTAX Integer32 (1..255) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Indicates the maximum power supply of the switch in volts. + When the current voltage exceeds the threshold value, + an SNMP trap with maximum severity will be sent to the manager." + + DEFVAL { 230 } + ::= { issSystem 69 } + +issSwitchPowerFailure OBJECT-TYPE + SYNTAX Integer32 (1..255) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Indicates the minimum power supply of the switch in volts. + When the current voltage drops below the threshold value, + an SNMP trap with maximum severity will be sent to the manager." + + DEFVAL { 100 } + ::= { issSystem 70 } + +issSwitchCurrentPowerSupply OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the current power supply in volts." + + ::= { issSystem 71 } + +issSwitchMaxRAMUsage OBJECT-TYPE + SYNTAX Integer32 (1..100) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Indicates the maximum RAM usage of the switch in percentage. + When the RAM usage crosses the threshold percentage + an SNMP trap with maximum severity will be sent to the manager." + + DEFVAL { 90 } + ::= { issSystem 72 } + +issSwitchCurrentRAMUsage OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the current RAM usage of the switch in percentage" + + ::= { issSystem 73 } + +issSwitchMaxFlashUsage OBJECT-TYPE + SYNTAX Integer32 (1..100) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Indicates the maximum flash usage of the switch in percentage. + When the flash usage crosses the threshold percentage + an SNMP trap with maximum severity will be sent to the manager." + + DEFVAL { 95 } + ::= { issSystem 74 } + +issSwitchCurrentFlashUsage OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the current flash usage of the switch in percentage" + + ::= { issSystem 75 } + + +issConfigRestoreFileFormatVersion OBJECT-TYPE + SYNTAX DisplayString (SIZE(1..12)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Config Save Restoration file format Version.This issConfigRestoreFile + FormatVersion value will be compared in each reboot against file format + version value stored in restoration file.Restoration will occur only if + the Restore file format version OID in restoration file matches this + OID and the value of Restore file format version field in restoration + file matches this OID's value. + + The current value of this issConfigRestoreFileFormatVersion is 1.1. + If any change happens in Restore File Format,then the value of this object + will be updated like this 1.2,1.3,1.4,1.5,...." + + ::= { issSystem 76 } + +issDebugOption OBJECT-TYPE + SYNTAX DisplayString (SIZE(0..288)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object stores the trace option string input given by the user. + To enable particular trace the user has to enter + the corresponding string(given below) assigned for that. + And for enabling more than once traces the user has to enter the + corresponding strings with SPACE delimiter between each string. + enable - Enables the corresponding option. + disable - Disables the corresponding option. + init-shut - Init and Shutdown traces + failure - All Failure Traces + func-entry-exit - Funtion entry and exit + for example to enable init-shut and failure trace the input string + should be enable init-shut failure" + ::= { issSystem 77 } + +issConfigDefaultValueSaveOption OBJECT-TYPE + SYNTAX INTEGER { + enabled(1), + disabled(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Indicates whether default values needs to be saved or not when + incremental save option is true.'enabled' value implies, MSR stores + default values also when Incremental save is true.'disabled' value + implies, MSR does not store default values when Incremental save is + true. + + Configuring this object value will update in issnvram.txt file. + The configured value will get into effect only after rebooting the ISS." + + DEFVAL { disabled } + + ::= { issSystem 78 } + +issConfigSaveIpAddrType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object specifies the address type of the remote system to which + the switch configurations have to be saved.The address type can be + IPv4 or IPv6 unicast address or DNS. + + This object is valid only if 'issConfigSaveOption' is chosen to be + 'remoteSave'." + ::= { issSystem 79 } + +issConfigSaveIpvxAddr OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object specifies the IP Address of the remote system to which the switch + configurations have to be saved. It supports DNS host name + when 'issConfigSaveIpAddrType' is of DNS Type. + + This object is valid only if 'issConfigSaveOption' is chosen to be + 'remoteSave'." + ::= { issSystem 80 } + +issConfigRestoreIpAddrType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object specifies the IP Address type of the remote system from where + the switch configurations have to be downloaded to the + 'Startup Configuration File' in the flash. + The address type can be IPv4 or IPv6 unicast address or DNS." + ::= { issSystem 81 } + +issConfigRestoreIpvxAddr OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object specifies the IP Address of the remote system from where + the switch configurations have to be downloaded to the + 'Startup Configuration File' in the flash. + The address type can be IPv4 or IPv6 unicast address or DNS type." + ::= { issSystem 82 } + +issDlImageFromIpAddrType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object specifies the address type of machine from where the image + has to be downloaded. The address type can be IPv4 or IPv6 + unicast address or DNS." + ::= { issSystem 83 } + +issDlImageFromIpvx OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The IP Address of machine from where the image has to be downloaded." + ::= { issSystem 84 } + +issUploadLogFileToIpAddrType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object specifies the address Type of machine to which the log file is + to be uploaded.The address type can be IPv4 or IPv6 unicast address or DNS." + ::= { issSystem 85 } + +issUploadLogFileToIpvx OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object specifies the address type of machine to which the log file is to be uploaded." + ::= { issSystem 86 } + +issAuditLogRemoteIpAddrType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS read-write + STATUS current + DESCRIPTION "IP Address Type of the remote system to which the + Audit file has to be transfered from flash." + ::= { issSystem 87 } + +issAuditLogRemoteIpvxAddr OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION "IP Address of the remote system to which the + Audit file has to be transfered from flash." + ::= { issSystem 88 } + +-- Set System Timer speed configuration + +issSystemTimerSpeed OBJECT-TYPE + SYNTAX Unsigned32 (1..1000) + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Configures the system timer speed. This is for testing purpose. + Value - 1 enables the timer to run in real time speed. + Values from (2 - 1000), enables the timer to run + (2x - 1000x) faster." + ::= { issSystem 89 } + +issMgmtInterfaceRouting OBJECT-TYPE + SYNTAX INTEGER { + enabled(1), + disabled(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + " Enables / Disables Routing over the Management Interface. + + This object can be configured only if the Management Port + is used for IP Access. " + + DEFVAL { disabled } + + ::= { issSystem 90 } + +issMacLearnRateLimit OBJECT-TYPE + SYNTAX Integer32 (0..2147483647) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Maximum number of unicast dynamic MAC (L2) entries hardware can learn + in the system, in a configured time interval 'issMacLearnRateLimitInterval'. + In next subsequent time interval, hardware can learn number of previously + learnt MAC entries plus present 'issMacLearnRateLimit' value, this + cycle will continue until MAC learning reaches to maximum number of L2 + unicast dynamic entries learning capacity of the system. If rate limit is + changed while 'issMacLearnLimitRateInterval' timer is running, new rate + limit value takes effect on next timer restart. + + This limit is to control the number of MAC entries indication to control + plane from hardware, when hardware MAC learning is enabled. + + Configuration value '0' disables this feature in the system. + This configuration does not impose any restrictions on multicast/broadcast + and dynamic/static/protocol(MMRP) MAC learning capability limits." + DEFVAL { 1000 } + ::= { issSystem 91 } + +issMacLearnRateLimitInterval OBJECT-TYPE + SYNTAX Unsigned32 (1..100000) + UNITS "milliseconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Number of MAC entries,'issMacLearnRateLimit' that can be learnt in + the system in this configured time interval. Any changed timer interval + value will take effect in next timer restart." + DEFVAL { 1000 } + ::= { issSystem 92 } + +issVrfUnqMacFlag OBJECT-TYPE + SYNTAX INTEGER { + disable (0), + enable (1) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Unique mac address can be assigned to each virtual router by enabling + this flag. Configuring this object value will result in updation to + issnvram.file. The configured value will take effect in ISS on next reboot." + + DEFVAL { disable } + ::= {issSystem 93} + +issLoginAttempts OBJECT-TYPE + SYNTAX Integer32(1..10) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Number of times a user may be allowed to login using + wrong password in the login prompt." + DEFVAL {3} + ::= {issSystem 94} + +issLoginLockTime OBJECT-TYPE + SYNTAX Integer32(30..900) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Time in seconds a user is blocked following unsuccessful logins." + DEFVAL {600} + ::= {issSystem 95} + +issAuditLogSizeThreshold OBJECT-TYPE + SYNTAX Unsigned32 (1..99) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This is the threshold value of the Log storage space with respect + to the maximum Log Storage Space. It is entered as a percentage value." + DEFVAL { 70 } + ::= { issSystem 96} + + +issTelnetStatus OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2), + enableInProgress(3), + disableInProgress(4) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object is for enabling or disabling the TELNET in the system. + Set operation of enable will move this object to the enableInProgress + first then to the enable on successfull transition. Otherwise it will + move back to the old state. Same applies to the disable also. + + CAUTION: enableInProgress and disableInProgress are not admin + configurable values" + DEFVAL { enable } + ::= { issSystem 97 } + +issWebSessionTimeOut OBJECT-TYPE + SYNTAX Integer32 (1..300) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Set the Web Session Time Out Value in Seconds" + DEFVAL { 300 } + ::= { issSystem 98 } + +issWebSessionMaxUsers OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Set the maximum number of web sessions" + DEFVAL { 7 } + ::= { issSystem 99 } + +issHeartBeatMode OBJECT-TYPE + SYNTAX INTEGER { + internal (1), + external (2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The object is for setting the method for Redundancy manager election + mechanism, it can be internal election logic or it can be a external + logic. When this object is set to be internal, proprietary + election logic called as HearBeat mechanism is applied for electing the + Active/Standby card in a redundant systems. When this object is set + to be external, external election logic should be applied for electing + Active/Standby card in a redundant systems. + + By default this object is set to Internal." + DEFVAL { internal } + ::= {issSystem 100} + +issRmRType OBJECT-TYPE + SYNTAX INTEGER { + hot (1), + cold(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The object is for setting the type of the Redundancy manager, it can be + Hot or Cold. When this object is set to be cold, whenever there is node + state transition from Standby to Active, the node needs to re-start, + re-initialized the hardware completely. When this object is set to be + Hot, whenever there is node state transition from Standby to Active, + the hardware should not be re-initialized. When the configurations are + saved in a file in Active node, then this needs to be transferred to + the standby node in both the redundancy modes. + + By default this is set to Hot." + DEFVAL { hot } + ::= {issSystem 101} + +issRmDType OBJECT-TYPE + SYNTAX INTEGER { + shared (1), + separate (2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object specifies the type of the dataplane/hardware, it can be a + shared dataplane or a separate dataplane. When this object is set to + be shared, standby card in a redundancy system should not program the + hardware and hardware audit should be conducted to sync the hardware + and software after switchover/node-transition. When this object is set + to be separate, it specifies that the nodes have separate hardware, + therefore standby card in a redundant system should program the + hardware and hardware audit is not required, since the hardware and + software are in sync always. + + By default this is set to Shared." + DEFVAL { shared } + ::= {issSystem 102} + +issClearConfig OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "When the object is set to TRUE, configurations will be cleared and + default configurations will be restored. The value will be reset to + FALSE again." + + DEFVAL { false } + ::= { issSystem 103 } + +issClearConfigFileName OBJECT-TYPE + SYNTAX DisplayString (SIZE(1..128)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This is the name of the file, which contains the default configurations + to be restored once configurations are cleared. This is optional. When + this file name is given, configurations in this file are assumed to be + default configurations. This configuration will be restored once the + configurations are cleared in ISS data base. When this file name is not + given, default configurations will not be restored. Only default + interface and VLAN will be brought up for management connectivity. + + When default configurations are to be restored, this object should be + configured first before configuring the issClearConfig object." + + DEFVAL { "clear.conf" } + ::= { issSystem 104 } + +issTelnetClientStatus OBJECT-TYPE + SYNTAX INTEGER { + disabled(0), + enabled(1) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object is for enabling or disabling the TELNET client functionality + in the system. Set operation of enable will allow to establish new Telnet + client sessions. Set operation of disable will not allow a new Telnet client + session, also terminates the active client sessions which are already running. + By default it will be enabled" + + DEFVAL { enabled } + ::= { issSystem 105 } + +issSshClientStatus OBJECT-TYPE + SYNTAX INTEGER { + disabled(0), + enabled(1) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object is for enabling or disabling the SSH client functionality + in the system. Set operation of enable will allow to establish new SSH client + sessions. Set operation of disable will not allow a new SSH client sessions, + also terminates the active client sessions which are already running. + By default it will be enabled" + DEFVAL { enabled } + ::= { issSystem 106 } + +issActiveTelnetClientSessions OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the number of active Telnet client sessions running" + ::= { issSystem 107 } + +issActiveSshClientSessions OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the number of active SSH client sessions running" + ::= { issSystem 108 } + +issLogFileSize OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION "This is the maximum file size in bytes of the log file" + DEFVAL { 1048576 } + + ::= { issSystem 109 } + +issLogReset OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Setting this to true ,erases the contents in configs.txt + fileand start logging" + DEFVAL { false } + ::= { issSystem 110 } + +issLogSizeThreshold OBJECT-TYPE + SYNTAX Unsigned32 (1..99) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This is the threshold value of the Log storage space with respect + to the maximum Log Storage Space. It is entered as a percentage value." + DEFVAL { 70 } + ::= { issSystem 111 } + + issAutomaticPortCreate OBJECT-TYPE + SYNTAX INTEGER { + enabled (1), + disabled (2) + } + + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object is for enabling and disabling automatic + port create feature.When set to enabled the ports in + will be automatically created in RSTP module when it + is mapped to a context.When set to disabled ports + are not created automatically and ports can be created + at rstp module level. " + DEFVAL { enabled } + ::= { issSystem 112 } + + issUlRemoteLogFileName OBJECT-TYPE + SYNTAX DisplayString (SIZE(1..128)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object is used to specify the filename/filename with path + to which the local file need to be copied in the remote system. + + This object is useful only when the 'LogOption' is chosen as 'file'." + DEFVAL { "iss.log" } + ::= { issSystem 113 } + + + issDefaultExecTimeOut OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object is for configuring the default idle time out for + ISS Prompt (exec-time out)." + ::= { issSystem 114 } + + issRmStackingInterfaceType OBJECT-TYPE + SYNTAX INTEGER { + oob (1), + inband (2) + } + + MAX-ACCESS read-write + STATUS current + DESCRIPTION + " This object is used to specify the type of stacking Interface used for + RM communication . Interface can be either an Out of Band port (or) + an Inband Ethernet port. This will be specified in issnvram.txt. + + If an Out of Band port is used,RM Interface should be specified in + issnvram.txt . RM Heartbeat and synchronization messages will be + transmitted as IP packets. Native Linux TCP/IP stack is used to + achieve Transport protocol functionality. + + If an Inband Ethernet port is used, RM Stack Interface will be + specified in Nodeid file . RM Heartbeat messages will be transmitted + as Ethernet packets and synchronization messages will be transmitted + as IP packets .Aricent TCP/IP stack is used to achieve Transport + protocol functionality.IP Address and the subnet Mask to be used for + this TCP/IP communication will be specified in NodeId file. + + Configuring this object will result in updation to issnvram.txt file. + The configured value will take effect in ISS on next reboot." + + DEFVAL { oob } + ::= { issSystem 115 } + + +issPeerLoggingOption OBJECT-TYPE + SYNTAX INTEGER { + console(1), + file(2), + flash(3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The Logging option specifying whether the Standby logging is to be + done at console or to a file(system buffer) in the system. + Flash specifies the logging of traces into a file." + DEFVAL { console } + ::= { issSystem 116 } + +issStandbyRestart OBJECT-TYPE +SYNTAX TruthValue +MAX-ACCESS read-write +STATUS current +DESCRIPTION + " In a High Availability System, this object allows the user to restart the + Standby switch (i.e) the entire Standby switch will operationally go down and + start again. + + Setting a value of 'true' causes the Standby switch to be restarted. This + configuration will be done in the Active switch in order to restart the + Standby switch. + + This configuration will not have any impact on the Active switch. + Active switch can be restarted using issRestart object." + +DEFVAL { false } +::= { issSystem 117 } + +issRestoreType OBJECT-TYPE + SYNTAX INTEGER { + msr (1), + csr (2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + + "Specifies whether the restoration type is MIB based save and restore + or CLI based save and restore. + + The value 'msr' specifies that the configuration restore will be + in the format of MIB OID. + + The value 'csr' specifies that the configuration restore will be + in the format of CLI commands" + + + DEFVAL { msr } + ::= { issSystem 118 } + +issSwitchModeType OBJECT-TYPE + SYNTAX INTEGER { + cutThroughSameSpeed (1), + storeForward (2), + cutThroughSlowToFast (3), + cutThroughFastToSlow (4) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This MIB object configures switching mode configuration at + switch level. The switching mode configuration done at switch + level will be applied on all the ports in the system including + stacking ports. + + When configured as StoreForward(2), the switch operates in a + store-and-forward mode and the switch checks each frame for + cyclic redundancy check (CRC) errors before forwarding them + to the network. Each frame is stored until the entire frame + has been received and checked. Because the switch waits for + forwarding the frame until the entire frame has been received + and checked, the switching speed in Store-Forward switching + mode is slower than the switching speed in Cut-Through + switching modes. + + When configured any of the cut-through modes, the switch + operates in Cut-Through switching mode and start forwarding + the frame as soon as the switch has read the destination + details in the packet header. A switch in Cut-Through mode + forwards the data before it has completedreceiving the entire + frame. The switching speed in Cut-Through mode is faster than + the switching speed in Store-Forward switching mode. + + Switching mode configuration: + CutThroughSameSpeed(1) : Cut-through forwarding between same speed + ports + StoreForward(2) : Store and forward switching mode + CutThroughSlowToFast(3): Cut-through forwarding between slower to + faster speed ports. + CutThroughFastToSlow(4): Cut-through forwarding between faster to + slower speed ports. + NOTE: + Few platforms supports extended Cut-Through mode for ports with + mismatched speeds.(eg. slow-to-fast, fast-to-slow). + Platforms which doesn't support extended Cut-Through mode, + Cut-Through same speed shall be considered as Cut-Through + switching mode" + DEFVAL { storeForward } + ::={ issSystem 119 } + +issConfigRestoreRetries OBJECT-TYPE + SYNTAX Integer32 (1..10) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object is used for configuring the number of retry attempts + for establishing connection with server during remote restore + operation" + DEFVAL { 1 } + ::= { issSystem 120 } + +issPauseFloodSamplingInterval OBJECT-TYPE +SYNTAX Unsigned32 (10..300) +UNITS "seconds" +MAX-ACCESS read-write +STATUS current +DESCRIPTION + "This object is used to set the sampling interval rate in seconds for pause + flood detection and protection feature." +DEFVAL { 30 } +::= { issSystem 121 } + +issPauseFloodProtect OBJECT-TYPE +SYNTAX INTEGER { + enabled (1), + disabled (2) + } +MAX-ACCESS read-write +STATUS current +DESCRIPTION + "This Object is used to Enable or disable the pause flood detection and + protection feature on all the ports in the system. Enabling this feature + avoids the resource exhaustion condition caused by pause frames/priority-based + pause frames. + The pause flood detection and protection feature is disabled by default." +DEFVAL { disabled } +::= { issSystem 122 } + +issPauseFloodMode OBJECT-TYPE +SYNTAX INTEGER { + disabled (1), + detectionOnly (2), + enabled (3) + } +MAX-ACCESS read-write +STATUS current +DESCRIPTION + "This Object specifies the pause flood mode as disabled/detected-only/enabled + for all the ports in the system. + + 'disabled' - In this mode, system is not monitored for pause flood + condition. + + 'detectionOnly' - In this mode, all system ports are monitored for pause + flood condition. All the system ports pause flood status + and statistics counters are updated. No protection action + is taken and no SNMP trap are generated. All the ports + in the system are allowed to operate normally and the + pause flood status is continually monitored and updated. + + 'enabled' - In this mode, all system ports are monitored for pause + flood condition. When pause flood condition is detected, + protective action is taken by disabling the administrator + status of those ports. The pause flood of those ports status + will be updated to indicate the existence of such condition. + Ports for which protective action is taken are remains in + disabled state until an administrative action is taken." +DEFVAL { disabled } +::= { issSystem 123 } + +issPauseFloodReset OBJECT-TYPE +SYNTAX TruthValue +MAX-ACCESS read-write +STATUS current +DESCRIPTION + "This object is used to recover or re-eanble the pause-flood + detection-only/enabled condition. + + Recovery action in Detection-only mode has to log every sampling and clear + the status and stats. + + Recovery action in enabled mode has to re-enable the ports + that were disabled due to the pause flood protective action." +DEFVAL { false } +::= { issSystem 124 } + +issPauseFloodTraceSeverityLevel OBJECT-TYPE +SYNTAX INTEGER { + emergency (0), + alert (1), + critical (2), + error (3), + warning (4), + notice (5), + informational (6), + debug (7) + } + +MAX-ACCESS read-write +STATUS current +DESCRIPTION + "This object specifies the value of severity level been configured for pause flood + module's debug tracing. It uses the value 0 (emergency) to 7 (debug). The value 0 is + given to higher priority trace messages and 7 given to lower priority traces messages. + The trace messages defined at or numerically lower than the value configured in + this MIB object are logged." +DEFVAL { 4 } +::= { issSystem 125 } + +issPauseFloodTraceOption OBJECT-TYPE +SYNTAX Integer32 +MAX-ACCESS read-write +STATUS current +DESCRIPTION + "This object is used to store the debug trace types that are enable by the user + for all the interfaces in the system. The bit positions of the traces is shown below. + Bit 0 - no trace + Bit 1 - init-shut + Bit 2 - mgmt + Bit 3 - sampling + Bit 4 - os resource + Bit 5 - entry + Bit 6 - exit " +DEFVAL { 0 } +::= { issSystem 126 } + +issPortsSwitchingModeStatus OBJECT-TYPE +SYNTAX PortList +MAX-ACCESS read-only +STATUS current +DESCRIPTION + "This object is used to reflect the switching mode + configuration of each physical port in the hardware. + + The switching mode is updated as bit-wise representation. + + Each bit position represents the interface index. + That is bit position 0 is for IfIndex 1, + bit position 1 is for IfIndex 2 and so on. + + The bit value represents the switching mode. + That is bit value 1 represent Cut-Through and + bit value 0 represent Store-Forward." +::= { issSystem 127 } + +issDebugTimeStampOption OBJECT-TYPE + SYNTAX INTEGER { + enabled (1), + disabled (2) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object is used to set the time stamp value in debug trace. + When time stamp is ENABLED, debug traces will be printed with timestamp and + when it is DISABLED, time stamp will not be displayed with the traces" + + DEFVAL { disabled } + + ::= { issSystem 128 } + +issLdapLoginPrivilege OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION "This object specifies the default privilege for users authenticated using LDAP." + +DEFVAL { 0 } +::= { issSystem 129 } + +issLdapAttributeName OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-write + STATUS current + DESCRIPTION "This object specifies the attribute name of the field to be authenticated using LDAP." + +DEFVAL { "" } +::= { issSystem 130 } + +issConfigRestoreFileSkuManifest OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-only + STATUS current + DESCRIPTION "This object specifies the switch models againts which the config file can be used for restoring configuration + String contains supported model numbers separated by ; (e.g. 1;2;3;4)" + +DEFVAL { "" } +::= { issSystem 131 } + +issDlImageType OBJECT-TYPE + SYNTAX INTEGER { + agent(1), + diagnostic(2), + firmware-cpld(3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "This object specifies the image type which will be downloaded" + +DEFVAL { 1 } +::= { issSystem 132 } + +issFirmwareCpldVersion OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-only + STATUS current + DESCRIPTION "This object specifies the cpld firmware version on the switch" + +DEFVAL { "" } +::= { issSystem 133 } + +issHttpMaxSessions OBJECT-TYPE + SYNTAX Integer32 (1..10) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object is used to set HTTP max sessions. + If the max sessions is being reduced, http(s) system is disabled, + are closed all the sessions and enabled again." + DEFVAL { 10 } + ::= { issSystem 134 } + +------ Config Control Group ------------------------------------ + +issConfigCtrlTable OBJECT-TYPE + SYNTAX SEQUENCE OF IssConfigCtrlEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table to control device features like egress traffic control, + stats collection, etc. either for the entire switch or for each + interface in the switch." + ::= { issConfigControl 1 } + +issConfigCtrlEntry OBJECT-TYPE + SYNTAX IssConfigCtrlEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry appears in this table for each interface in the system. + + In addition to that an entry with index '0' is created in this + table by default. + + If 'issConfigCtrlStatus' of the entry '0' is made 'valid', then + global control is chosen and the values against entry '0' is + applicable for all the interfaces of the switch. + + If 'issConfigCtrlStatus' of the entry '0' is made 'invalid', + then interface-wise control is chosen & the values against each + interface index is applicable for that interface. + + At a particular point of time, either global control will be + applicable or interface-wise control is applicable. + Both will not be considered together. + + Index to the table is the interface index of the port." + + INDEX { issConfigCtrlIndex } + ::= { issConfigCtrlTable 1 } + +IssConfigCtrlEntry ::= + SEQUENCE { + issConfigCtrlIndex + Integer32, + issConfigCtrlEgressStatus + INTEGER, + issConfigCtrlStatsCollection + INTEGER, + issConfigCtrlStatus + INTEGER + } + +issConfigCtrlIndex OBJECT-TYPE + SYNTAX Integer32 (0..65535) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Interface index of the port for which the configuration + in this entry applies. + + If any configuration is made in this table for the index '0', + that configuration will be considered as global configuration + and is applicable for all the interfaces of the switch." + ::= { issConfigCtrlEntry 1 } + +issConfigCtrlEgressStatus OBJECT-TYPE + SYNTAX INTEGER { + enabled (1), + disabled (2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Controls the transmission of egress traffic over this interface. + + This value for entry '0' controls the egress traffic over all + interfaces." + DEFVAL { enabled } + ::= { issConfigCtrlEntry 2 } + + +issConfigCtrlStatsCollection OBJECT-TYPE + SYNTAX INTEGER { + enabled (1), + disabled (2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enables or disables statistics collection for this interface. + + This value for entry '0' controls the stats collection for all + interfaces." + DEFVAL { enabled } + ::= { issConfigCtrlEntry 3 } + +issConfigCtrlStatus OBJECT-TYPE + SYNTAX INTEGER { + valid (1), + invalid (2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Speficies the validity of the entry. + + If the 'Config Control Status' for entry '0' is made 'valid', + then global control is chosen in the system. + It signifies that the values against entry '0' is applicable + for all the interfaces of the switch. + + If the 'Config Control Status' for entry '0' is made 'invalid', + then interface-wise control is chosen. + Then the values against each interface index is applicable + for that interface. + + By default, 'issConfigCtrlStatus' will be 'invalid' for + entry '0' and 'valid' for all other entries. + (ie) by default, interface-wise configuration is enabled + in the system. + + The status of entries other than the zeroth(0th) entry can not be + made 'invalid'." + ::= { issConfigCtrlEntry 4 } + + +-- Port Control Table + +issPortCtrlTable OBJECT-TYPE + SYNTAX SEQUENCE OF IssPortCtrlEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table to control the port specific parameters of the device like speed, + duplex mode, etc." + ::= { issConfigControl 2 } + +issPortCtrlEntry OBJECT-TYPE + SYNTAX IssPortCtrlEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry appears in this table for each interface in the system. + + Index to the table is the interface index of the port." + + INDEX { issPortCtrlIndex } + ::= { issPortCtrlTable 1 } + +IssPortCtrlEntry ::= + SEQUENCE { + issPortCtrlIndex + Integer32, + issPortCtrlMode + INTEGER, + issPortCtrlDuplex + INTEGER, + issPortCtrlSpeed + INTEGER, + issPortCtrlFlowControl + INTEGER, + issPortCtrlRenegotiate + INTEGER, + issPortCtrlMaxMacAddr + Integer32, + issPortCtrlMaxMacAction + INTEGER, + issPortHOLBlockPrevention + INTEGER, + issPortAutoNegAdvtCapBits + OCTET STRING, + issPortCpuControlledLearning + INTEGER, + issPortMdiOrMdixCap + INTEGER, + issPortCtrlFlowControlMaxRate + Integer32, + issPortCtrlFlowControlMinRate + Integer32, + issPortCtrlPauseFloodProtect + INTEGER, + issPortCtrlPauseFloodMode + INTEGER, + issPortCtrlPauseFloodStatus + INTEGER, + issPortCtrlPauseFloodReset + TruthValue, + issPortCtrlPauseFloodStats + Unsigned32, + issPortCtrlPauseFloodStatsClear + TruthValue, + issPortCtrlPauseFloodTraceOption + Integer32, + issPortCtrlSwitchModeType + INTEGER, + issPortCtrlSwitchModeStatus + INTEGER, + issPortCtrlInbandAutoNeg + INTEGER, + issPortCtrlBypassInbandAutoNeg + INTEGER, + issPortCtrlForceSpeed + INTEGER +} + +issPortCtrlIndex OBJECT-TYPE + SYNTAX Integer32 (1..65535) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Interface index of the port for which the configuration + in this entry applies." + + ::= { issPortCtrlEntry 1 } + +issPortCtrlMode OBJECT-TYPE + SYNTAX INTEGER { + auto (1), + noNegotiation (2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Speficies the mode in which the speed, duplex modes and flow control + of the interface is determined. + + If set as 'auto', the hardware senses speed and negotiates with the port + on the other end of the link for data transfer operation as + 'full-duplex' or 'half-duplex' and about flow contol. + + If set as 'nonegotiation', the configured values for interface + speed, duplex mode and flow control will be effective." + + DEFVAL { auto } + ::= { issPortCtrlEntry 2 } + +issPortCtrlDuplex OBJECT-TYPE + SYNTAX INTEGER { + full (1), + half (2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Configures interface data transfer mode as full-duplex or half-duplex. + + This object can be configured only if the 'PortCtrlMode' is 'nonegotiation'. + If the 'PortCtrlMode' is 'auto', it obtains the value from Hardware + after negotiating with its peer" + + ::= { issPortCtrlEntry 3 } + +issPortCtrlSpeed OBJECT-TYPE + SYNTAX INTEGER { + tenMBPS (1), + hundredMBPS (2), + oneGB (3), + tenGB (4), + fortyGB (5), + fiftyGB (6), + twothousandfivehundredMBPS (7), + twentyfiveGB (8), + onehundredGB (9) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Configures interface speed. + + This object can be configured only if the 'PortCtrlMode' is 'nonegotiation'. + If the 'PortCtrlMode' is 'auto', it obtains the value from Hardware + after negotiating with its peer" + + ::= { issPortCtrlEntry 4 } + +issPortCtrlFlowControl OBJECT-TYPE + SYNTAX INTEGER { + enable (1), + disable (2) + } + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "Enables / disables flow control for the interface. + + This object be configured only if the 'PortCtrlMode' is 'nonegotiation'. + If the 'PortCtrlMode' is 'auto', it obtains the value from Hardware + after negotiating with its peer. + + Since this object is deprecated, corresponding functionality can be + realised by dot3PauseAdminMode from stdether.mib" + + ::= { issPortCtrlEntry 5 } + +issPortCtrlRenegotiate OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "When configured as 'true', restarts autonegotiation on the interface. + + Once autonegotiation is restarted, the value of this object reverts + to 'false'." + + DEFVAL { false } + ::= { issPortCtrlEntry 6 } + +issPortCtrlMaxMacAddr OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies the maximum number of new MAC addresses that can be + learnt over the interface." + ::= { issPortCtrlEntry 7 } + +issPortCtrlMaxMacAction OBJECT-TYPE + SYNTAX INTEGER { + drop (1), + purgeLRU (2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies the action to be taken when the maximum number of new MAC + addresses that can be learnt over the interface is exceeded. + + If the action is 'drop', the packet with new mac address will be + dropped once the maximum number of new MAC addresses that can be + learnt over the interface is exceeded. + + If the action is 'purgeLRU', the 'Least Recently Used' mac address + will be deleted from the MAC table and the new mac address will be + added." + ::= { issPortCtrlEntry 8 } + +issPortHOLBlockPrevention OBJECT-TYPE + SYNTAX INTEGER { + disabled (1), + enabled (2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enables or disables Head-Of-Line Blocking prevention on a port." + DEFVAL { enabled } + ::= { issPortCtrlEntry 9 } +issPortAutoNegAdvtCapBits OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A value uniquely identifies the set of capabilities advertised + by the local auto negotiation entity other than the standard + capabilities supported by ifMauAutoNegCapAdvertisedBits. + When this object is needed to be configured, one of the capabilities + from the standard object should be set to bOther." + ::= { issPortCtrlEntry 10 } + +issPortCpuControlledLearning OBJECT-TYPE + SYNTAX INTEGER { + disabled (1), + enabled (2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enables or disables the CPU controlled learning on a port. + The default behavior is hardware learning. By enabling this object + software learning on that particular port is enabled. + + When CPU controlled learning is enabled, for the first time, packet + will be copied to CPU and source MAC address learning will not happen + in the hardware. When packet is received at PNAC - if the source MAC + address is authorized, the packet will be allowed to go through further + processing. Else, the packet will be dropped. When packets from + authorized MAC address are received at VLAN, MAC learning will happen + at VLAN and the same entry will be programmed in the hardware. Once the + MAC address is learnt, further forwarding will happen at driver itself. + + The Mac address entries which are added through software learning are + checked in periodical intervals for the HIT entry. If there is no + traffic for that entry, the HIT flag won't be set. The entry will be + removed from the hardware if the hit flag is not set. + Note: When software learning is enabled, rate limiting to the port + needs to be configured" + + DEFVAL { disabled } + ::= { issPortCtrlEntry 11 } + +issPortMdiOrMdixCap OBJECT-TYPE + SYNTAX INTEGER { + auto (1), + mdi (2), + mdix (3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies the port should be in Auto-Mdix mode or Mdi/Mdix. + + Setting the value to `auto` enables the Auto MDIX in the port - + issPortCtrlIndex. This will be effective only when the speed of the + particular port is auto negotiable. + + Setting the value to `mdi` disables the Auto MDIX in the port and the + port will be in mdi mode. + + Setting the value to `mdix` disables the Auto MDIX in the port and the + port will be in mdix mode." + DEFVAL { auto } + ::= { issPortCtrlEntry 12 } + +issPortCtrlFlowControlMaxRate OBJECT-TYPE + SYNTAX Integer32 (0..80000000) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Configures the maximum rate (kbps) - a high water mark beyond which + pause frames will be generated to flow control the ingress traffic. + This value should be set to 0 if no pause frame generation is required. + In chipsets that does not support seperate rate configuration for + pause frame generation, this object's value will take effect on + the interface ingress speed." + ::= { issPortCtrlEntry 13 } + +issPortCtrlFlowControlMinRate OBJECT-TYPE + SYNTAX Integer32 (0..80000000) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Configures the minimum rate (kbps) - a low water mark below which pause + frames generation will be stopped. This value should be set to a value + lesser that of 'issPortCtrlFlowControlMaxRate'. This value should be set + to zero only when flow control is disabled. Chipsets on which this low + water mark is not supported, the 'issPortCtrlFlowControlMaxRate' will + alone be used." + ::= { issPortCtrlEntry 14 } + +issPortCtrlPauseFloodProtect OBJECT-TYPE + SYNTAX INTEGER { + enabled (1), + disabled (2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object is used to enable or disable the pause flood detection-only + or detection and protection feature on a port. The default behavior is + to have this feature disabled on a port. Enabling the feature avoid + resource exhaustion condition caused by pause frames/priority-based + pause frames" + DEFVAL { disabled } + ::= { issPortCtrlEntry 15 } + +issPortCtrlPauseFloodMode OBJECT-TYPE + SYNTAX INTEGER { + disabled (1), + detectionOnly (2), + enabled (3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object specifies the pause flood mode as disabled/detected-only/enabled + + 'disabled' - In this mode, port is not monitored for pause flood condition. + + 'detectionOnly' - In this mode, port is monitored for pause flood condition. + The port's pause flood status and statistics counters are updated. No protection + action is taken and no SNMP traps are generated. The port is allowed to + operate normally and the pause flood status is continually monitored and updated. + + 'enabled' - In this mode, port is monitored for pause flood condition. + When pause flood condition is detected, protective action is taken by disabling + the administrator status of the port. The pause flood port status will be + updated to indicate the existence of such a condition. The port remains in + disabled state until an administrative action is taken." + DEFVAL { disabled } + ::= { issPortCtrlEntry 16 } + +issPortCtrlPauseFloodStatus OBJECT-TYPE + SYNTAX INTEGER { + normal (1), + detected (2), + blocked (3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object specifies the pause flood status. + + 'normal' - This status specifies that the pause flood condition has not + been detected or the feature is disabled. + + 'detected' - This status specifies that the pause flood condition being + detected. This is applicable only when the pause flood mode + is 'detection-only'. + + 'blocked' - This status specifies the pause flood condition being detected + and protective action taken. This is applicable only when + the pause flood mode is 'enabled'" + ::= { issPortCtrlEntry 17 } + +issPortCtrlPauseFloodReset OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object is used to recover or re-eanble the pause-flood + detection-only/enabled condition. + Recovery action in Detection-only mode has to log every sampling and clear + the status and stats. + + Recovery action in enabled mode has to recovers/re-enables a port + that was disabled due to the pause flood protective action." + DEFVAL { false } + ::= { issPortCtrlEntry 18 } + +issPortCtrlPauseFloodStats OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object is used to hold the number of times the port entered pause flood condition." + ::= { issPortCtrlEntry 19 } + +issPortCtrlPauseFloodStatsClear OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object is used to clear the number of times the port entered pause flood condition." + DEFVAL { false } + ::= { issPortCtrlEntry 20 } + +issPortCtrlPauseFloodTraceOption OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object is used to store the debug trace types that are enable by the user + for particular Interface. The bit positions of the traces is shown below. + Bit 0 - no trace + Bit 1 - init-shut + Bit 2 - mgmt + Bit 3 - sampling + Bit 4 - os resource + Bit 5 - entry + Bit 6 - exit" + DEFVAL { 0 } + ::= { issPortCtrlEntry 21 } + +issPortCtrlSwitchModeType OBJECT-TYPE + SYNTAX INTEGER { + cutThroughSameSpeed (1), + storeForward (2), + cutThroughSlowToFast (3), + cutThroughFastToSlow (4) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object is used to configure switching mode configuration + per port-level. + + Switching mode can be configured only for physical ports. + + When configured as StoreForward(2), the port operates in a + store-and-forward mode and the switch checks each frame for + cyclic redundancy check (CRC) errors before forwarding them + to the network. Each frame is stored until the entire frame + has been received and checked. Because the switch waits for + forwarding the frame until the entire frame has been received + and checked, the switching speed in Store-Forward switching + mode is slower than the switching speed in Cut-Through + switching modes. + + When configured any of the cut-through modes, the switch + operates in Cut-Through switching mode and start forwarding + the frame as soon as the switch has read the destination + details in the packet header. A switch in Cut-Through mode + forwards the data before it has completed receiving the + entire frame. The switching speed in Cut-Through mode is + faster than the switching speed in Store-Forward switching + mode. + + Switching mode configuration: + CutThroughSameSpeed(1) : Cut-through forwarding between same speed + ports + StoreForward(2) : Store and forward switching mode + CutThroughSlowToFast(3): Cut-through forwarding between slower to + faster speed ports. + CutThroughFastToSlow(4): Cut-through forwarding between faster to + slower speed ports. + NOTE: + Few platforms supports extended Cut-Through mode for ports with + mismatched speeds.(eg. slow-to-fast, fast-to-slow). + Platforms which doesn't support extended Cut-Through mode, + Cut-Through same speed shall be considered as Cut-Through + switching mode" + DEFVAL { storeForward } + ::={ issPortCtrlEntry 22 } + +issPortCtrlSwitchModeStatus OBJECT-TYPE + SYNTAX INTEGER { + cutThroughSameSpeed (1), + storeForward (2), + cutThroughSlowToFast (3), + cutThroughFastToSlow (4) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object is a read-only scalar MIB object to reflect the switching + mode configuration of the port in the hardware. + + Switching mode configuration: + CutThroughSameSpeed(1) : Cut-through forwarding between same speed + ports + StoreForward(2) : Store and forward switching mode + CutThroughSlowToFast(3): Cut-through forwarding between slower to + faster speed ports. + CutThroughFastToSlow(4): Cut-through forwarding between faster to + slower speed ports. + NOTE: + Few platforms supports extended Cut-Through mode for ports with + mismatched speeds.(eg. slow-to-fast, fast-to-slow). + Platforms which doesn't support extended Cut-Through mode, + Cut-Through same speed shall be considered as Cut-Through + switching mode" + + ::={ issPortCtrlEntry 23 } + +issPortCtrlInbandAutoNeg OBJECT-TYPE + SYNTAX INTEGER { + on(1), + off(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object is used to enable or disable the CPSS inband auto-negotiation. + This is required by certain 1G transceivers." + ::={ issPortCtrlEntry 24 } + +issPortCtrlBypassInbandAutoNeg OBJECT-TYPE + SYNTAX INTEGER { + on(1), + off(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object is used to enable or disable the CPSS bypass inband auto-negotiation. + When this is enabled auto-negotiation may be bypassed when negotiating link if one side does not respond. + This is required by certain 1G transceivers." + ::={ issPortCtrlEntry 25 } + +issPortCtrlForceSpeed OBJECT-TYPE + SYNTAX INTEGER { + on(1), + off(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object is used to detect manual speed settings on sfp ports." + ::={ issPortCtrlEntry 26 } +-- ------------------------------------------------------------------ +-- Port Isolation Table +-- ------------------------------------------------------------------ + +issPortIsolationTable OBJECT-TYPE + SYNTAX SEQUENCE OF IssPortIsolationEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table is used to configure the port isolation feature. + For a given port, user can configure the list of allowed + forwarding/egress ports, where the packets for particular vlan that + ingress the port can be forwarded. If the Vlan is not given, then + the rule will be applied for all packets that ingress the given port. + + This table can be configured only for physical and link aggregated + ports. + + Before a packet is sent out of a port (after all L2/L3 processing), port + isolation table entry is referred for the ingress port of that packet. + If an entry is present for that ingress port and if the outgoing port + is configured as one of the egress ports , then the packet + will be transmitted out of that outgoing port. Otherwise the packet + will be dropped. + + If there is no entry configured for that ingress port in this + table, then the packet will be transmitted on that outgoing port." + ::= { issConfigControl 3 } + +issPortIsolationEntry OBJECT-TYPE + SYNTAX IssPortIsolationEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each etnry in this table gives a ingress port to egress port mapping." + INDEX { issPortIsolationIngressPort, issPortIsolationInVlanId, issPortIsolationEgressPort} + ::= { issPortIsolationTable 1 } + +IssPortIsolationEntry ::= + SEQUENCE { + issPortIsolationIngressPort + InterfaceIndex, + issPortIsolationInVlanId + Integer32, + issPortIsolationEgressPort + InterfaceIndex, + issPortIsolationStorageType + StorageType, + issPortIsolationRowStatus + RowStatus + } + +issPortIsolationIngressPort OBJECT-TYPE + SYNTAX InterfaceIndex + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This object speficies the IfIndex of the ingress port. This port can + be a physical or link aggregated port." + ::= { issPortIsolationEntry 1 } + +issPortIsolationInVlanId OBJECT-TYPE + SYNTAX Integer32 (0..4094) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "If this object value is non-zero, then the port isolation rule is + applied for all packets received on the given ingress port. + Otherwise the rule is applied for this vlan packets received on the + given ingress port." + ::= { issPortIsolationEntry 2 } + +issPortIsolationEgressPort OBJECT-TYPE + SYNTAX InterfaceIndex + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This object specifies one of the allowed egress ports for the given + ingress port identified by the first index for this row. + This port can be either a physical or link aggregated port." + ::= { issPortIsolationEntry 3 } + +issPortIsolationStorageType OBJECT-TYPE + SYNTAX StorageType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the storage type of this entry. + Only 'volatile' and 'nonVolatile' values are allowed for this object. + 'readOnly', 'permenant' and 'other' values are not allowed for this + object. + + If this table is configured for an ingress port and InVlanId via + management, then the issPortIsolationStorageType for all the entries + with this ingress port as primary index and this InVlanId as + secondary index will have the values as 'nonVolatile'. + Otherwise it will be set to 'volatile'. + + Entries in this table will be restored on reboot, only if the + corresponding issPortIsolationStorageType object is set as + nonVolatile." + ::= { issPortIsolationEntry 4 } + + +issPortIsolationRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Denotes the Row Status for port isolation table entry. + Only 'CreateAndGo' and 'destroy' values are allowed for this + object. 'CreateAndWait' and 'notInService' values are not allowed. + Example: + To add ports 2, 3 as egress ports for ingress port 1 in this table, + the following sequence to be followed: + + 1. Set the issPortIsolationRowStatus as 'CreateAndGo' for the + entry with index + (issPortIsolationIngressPort = 1, issPortIsolationInVlanId =0, + issPortIsolationEgressPort = 2) + 2. Set the issPortIsolationRowStatus as 'CreateAndGo' for the + entry with index + (issPortIsolationIngressPort = 1, issPortIsolationInVlanId =0, + issPortIsolationEgressPort = 3) + + To add ports 5, 6 as egress ports for ingress port 7 and for vlan 5 + in this table, the following sequence to be followed: + + 1. Set the issPortIsolationRowStatus as 'CreateAndGo' for the + entry with index + (issPortIsolationIngressPort = 7, issPortIsolationInVlanId =5, + issPortIsolationEgressPort = 5) + 2. Set the issPortIsolationRowStatus as 'CreateAndGo' for the + entry with index + (issPortIsolationIngressPort = 7, issPortIsolationInVlanId =5, + issPortIsolationEgressPort = 6) + + To delete a egress port 3 from the list of egress ports for ingress + port 1 do the following: + Set the issPortIsolationRowStatus as 'destroy' for the + entry with index + (issPortIsolationIngressPort = 1, issPortIsolationEgressPort = 3)" + + ::= { issPortIsolationEntry 5 } + +-- Mirror Group ------------------------------------------------------ + +issMirrorStatus OBJECT-TYPE + SYNTAX INTEGER { + disabled (1), + enabled (2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object is used to enable/disable mirroring + feature in hardware. + When set to 'disabled (1)', all mirroring configurations will be + removed from hardware. + When set to 'enabled (2)', all mirroring configurations + present in software will be programmed in hardware." + + DEFVAL { enabled } + ::= { issMirror 1 } + +issMirrorToPort OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies the port to which the active mirrored traffic controlled + by issMirrorCtrlTable is to be copied." + ::= { issMirror 2 } + +-- Mirror Control Table + +issMirrorCtrlTable OBJECT-TYPE + SYNTAX SEQUENCE OF IssMirrorCtrlEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table to control mirroring features for each interface + in the switch. + + Parameters in this table are valid only when the + 'issMirrorStatus' for the switch is not 'disabled'." + ::= { issMirror 3 } + +issMirrorCtrlEntry OBJECT-TYPE + SYNTAX IssMirrorCtrlEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry appears in this table for each interface + in the system." + INDEX { issMirrorCtrlIndex } + ::= { issMirrorCtrlTable 1 } + +IssMirrorCtrlEntry ::= + SEQUENCE { + issMirrorCtrlIndex + Integer32, + issMirrorCtrlIngressMirroring + INTEGER, + issMirrorCtrlEgressMirroring + INTEGER, + issMirrorCtrlStatus + INTEGER + } + +issMirrorCtrlIndex OBJECT-TYPE + SYNTAX Integer32 (1..65535) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The interface index of the port for which the configuration + in this entry applies." + ::= { issMirrorCtrlEntry 1 } + +issMirrorCtrlIngressMirroring OBJECT-TYPE + SYNTAX INTEGER { + enabled(1), + disabled(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Provides control to enable or disable mirroring of ingress + traffic over this interface to the mirrored-to port." + DEFVAL { disabled } + ::= { issMirrorCtrlEntry 2 } + +issMirrorCtrlEgressMirroring OBJECT-TYPE + SYNTAX INTEGER { + enabled(1), + disabled(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Provides control to enable or disable mirroring of egress + traffic over this interface to the mirrored-to port." + DEFVAL { disabled } + ::= { issMirrorCtrlEntry 3 } + +issMirrorCtrlStatus OBJECT-TYPE + SYNTAX INTEGER { + valid(1), + invalid(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies the validity of the entry." + ::= { issMirrorCtrlEntry 4 } + +-- Mirror Control Extension Table + +issMirrorCtrlRemainingSrcRcrds OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the number of source records remaining in the system. + Each record can store at least one source information. In case + consecutive source id are configured then record will store the range" + ::= { issMirror 4 } + +issMirrorCtrlRemainingDestRcrds OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the number of destination records remaining in the system. + Each record can store at least one destination information. In case + consecutive destination id are configured then record will store the + range" + ::= { issMirror 5 } + +issMirrorCtrlExtnTable OBJECT-TYPE + SYNTAX SEQUENCE OF IssMirrorCtrlExtnEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This Table is used to configure advanced mirroring features like + - Port Based Mirroring: + - flow based mirroring + - vlan based mirroring + + Following are the configuration details for Port based mirroring: + To configure source ports in a session + - issMirrorCtrlExtnMirrType - is set to portBased + - issMirrorCtrlExtnSrcTable - should be used to configure list + of source ports to be mirrored + in a session + - issMirrorCtrlExtnSrcId - represents the source port. + The port Id to be mirrored + should be given here. + - issMirrorCtrlExtnSrcCfg - this object is used to + add/remove a port in the + source port list + + Example + To create a session 1 with source ports 5,6 following + sequence of configuration should be followed + For table issMirrorCtrlExtnTable + issMirrorCtrlExtnSessionIndex = 1 as index + issMirrorCtrlExtnMirrType = portBased + + For table issMirrorCtrlExtnSrcTable + issMirrorCtrlExtnSessionIndex = 1 as index + issMirrorCtrlExtnSrcId = 5 as index + issMirrorCtrlExtnSrcCfg = add + issMirrorCtrlExtnSessionIndex = 1 as index + issMirrorCtrlExtnSrcId = 6 as index + issMirrorCtrlExtnSrcCfg = add + + To configure destination ports in a session + - issMirrorCtrlExtnDestinationTable - should be used to + configure list of + destination ports to be + mirrored in a session + - issMirrorCtrlExtnDestination - represents the + destination port. The + port Id to which packets + should be mirrored should + be given here. + - issMirrorCtrlExtnDestCfg - this object is used to + add/remove a port in the + source port list. + Example + To create a session 1 with destination port 10,11 following + sequence of configuration should be followed + For table issMirrorCtrlExtnTable + issMirrorCtrlExtnSessionIndex = 1 as index + issMirrorCtrlExtnMirrType = portBased + + For table issMirrorCtrlExtnDestinationTable + issMirrorCtrlExtnSessionIndex = 1 as index + issMirrorCtrlExtnDestination = 10 as index + issMirrorCtrlExtnDestCfg = add + issMirrorCtrlExtnSessionIndex = 1 as index + issMirrorCtrlExtnDestination = 11 as index + issMirrorCtrlExtnDestCfg = add + + To Activate a session + - issMirrorCtrlExtnStatus - should be used to + activate/deactivate mirroring for a + session + Example + To enable mirroring for a session following sequence of + configuration should be followed + For table issMirrorCtrlExtnTable + issMirrorCtrlExtnSessionIndex = 1 as index + issMirrorCtrlExtnStatus = active + + Above configurations applies to flow based mirroring also, the + issMirrorCtrlExtnSrcId used above for configuratin ports + should be used to configure flow Id + + To enable remote monitoring of sources for a session + - issMirrorCtrlExtnRSpanStatus - should be used to + enable/disable remote + monitoring for a session + it can be used to set a + session as source rspan + session which implies source + entities for this session are + monitored remotely or can be + used to set a session + as destination rspan session + which implies that mirrored + data is received for this + session should be forwarded to + destination entities of this + session + - issMirrorCtrlExtnRSpanVlanId - it is the vlan id which is + reserved in the network to + carry Mirrored data,if the + session is configured as + source rspan session then data + mirrored for the source + entities will be forwarded on + this vlan if the session is + configured as destination + rspan session then data + received on this vlan will be + forwarded to the destination + entities of this session + + Following are the configuration details for configurating Vlan + based mirroring: + To configure vlans as source for a session + - issMirrorCtrlExtnMirrType - is set to vlanBased + - issMirrorCtrlExtnSrcVlanTable - should be used to configure + list of source vlans to be + mirrored in a session + - issMirrorCtrlExtnSrcVlanId - represents a source vlan. The + vlan to be mirrored should be + given here. + - issMirrorCtrlExtnSrcVlanCfg - this object is used to + add/remove a vlan in the + source vlan list + Example + To create a session 1 with source list as vlan 5,6 + belonging to context 1 following sequence of configuration + should be followed + For table issMirrorCtrlExtnTable + issMirrorCtrlExtnSessionIndex = 1 as index + issMirrorCtrlExtnMirrType = vlanBased + + For table issMirrorCtrlExtnSrcVlanTable + issMirrorCtrlExtnSrcVlanContext = 1 as index + issMirrorCtrlExtnSessionIndex = 1 as index + issMirrorCtrlExtnSrcVlanId = 5 as index + issMirrorCtrlExtnSrcVlanCfg = add + issMirrorCtrlExtnSrcVlanContext = 1 as index + issMirrorCtrlExtnSessionIndex = 1 as index + issMirrorCtrlExtnSrcVlanId = 6 as index + issMirrorCtrlExtnSrcVlanCfg = add + + Entries for this table can be configured only when issMirrorStatus + is set to enabled. + Configurations done through 'issMirrorCtrlTable' will change the + following for the first session on this table: + - Mirroring type will be changed to port-based + - Mode and Source entities will be overwritten + with the values configured through 'issMirrorCtrlTable' + - Destination entities will be overwritten + with the value configured through 'issMirrorToPort' object " + ::= { issMirror 6 } + +issMirrorCtrlExtnEntry OBJECT-TYPE + SYNTAX IssMirrorCtrlExtnEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry appears in this table for each session + in the system." + INDEX { issMirrorCtrlExtnSessionIndex} + ::= { issMirrorCtrlExtnTable 1 } + +IssMirrorCtrlExtnEntry ::= + SEQUENCE { + issMirrorCtrlExtnSessionIndex + Integer32, + issMirrorCtrlExtnMirrType + INTEGER, + issMirrorCtrlExtnRSpanStatus + INTEGER, + issMirrorCtrlExtnRSpanVlanId + Integer32, + issMirrorCtrlExtnRSpanContext + Integer32, + issMirrorCtrlExtnStatus + RowStatus + } + +issMirrorCtrlExtnSessionIndex OBJECT-TYPE + SYNTAX Integer32 (1..20) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The index of the mirroring session for which the configuration + in this entry applies." + ::= { issMirrorCtrlExtnEntry 1 } + +issMirrorCtrlExtnMirrType OBJECT-TYPE + SYNTAX INTEGER{ + portBased(1), + macflowBased(2), + vlanBased(3), + invalid(4), + ipflowBased(5) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object tells the type of mirroring this session supports. + This object needs to be set before doing any configuration for + a mirroring session" + DEFVAL { invalid } + ::= { issMirrorCtrlExtnEntry 2 } + +issMirrorCtrlExtnRSpanStatus OBJECT-TYPE + SYNTAX INTEGER{ + sourceRSpanVlan(1), + destinationRSpanVlan(2), + disabled(3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object indicates session is enabled or disabled for + Remote monitoring. + If set as 'source-rspan-vlanid' indicates that the session is + enabled for Remote monitoring and the source entities for this + session will be remotely monitored. + If set as 'destination-rspan-vlanid' indicates that the session + should monitor remote traffic mirrored with RSPAN VLAN ID tag. + RSPAN VLAN ID should be configured through object + 'issMirrorCtrlExtnRSpanVlanId'. + If set as 'disabled' Remote monitoring is disabled for this + mirroring session." + + DEFVAL { disabled } + ::= { issMirrorCtrlExtnEntry 3 } + +issMirrorCtrlExtnRSpanVlanId OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Vlan Id used for Remote monitoring for this session. + If issMirrorCtrlExtnRSpanStatus is set to disabled, then + this object will have an invalid value (zero)" + DEFVAL { 0 } + ::= { issMirrorCtrlExtnEntry 4 } + +issMirrorCtrlExtnRSpanContext OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies the Context Id to which the RSpan Vlan belongs. + Value '0' mean this object is not considered for this + mirroring session." + DEFVAL { 0 } + ::= { issMirrorCtrlExtnEntry 5 } + +issMirrorCtrlExtnStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object indicates the status of the entry. The entry can be + made active only if issMirrorCtrlExtnMirrType is configured and + source and destination entries for this sesion is also configured" + ::= { issMirrorCtrlExtnEntry 6 } + +issMirrorCtrlExtnSrcTable OBJECT-TYPE + SYNTAX SEQUENCE OF IssMirrorCtrlExtnSrcEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table to configure list of source entities for mirroring sessions" + ::= { issMirror 7 } + +issMirrorCtrlExtnSrcEntry OBJECT-TYPE + SYNTAX IssMirrorCtrlExtnSrcEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry appears in this table for each mirroring session." + INDEX { issMirrorCtrlExtnSessionIndex, issMirrorCtrlExtnSrcId } + ::= { issMirrorCtrlExtnSrcTable 1 } + +IssMirrorCtrlExtnSrcEntry ::= + SEQUENCE { + issMirrorCtrlExtnSrcId + Integer32, + issMirrorCtrlExtnSrcCfg + INTEGER, + issMirrorCtrlExtnSrcMode + INTEGER + } + +issMirrorCtrlExtnSrcId OBJECT-TYPE + SYNTAX Integer32 (1..65535) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Specifies the source id which participates in a mirroring session. + For Port based mirroring this object can be port IfIndex. + To mirror Tunnel and Trunk ports the same Id can be used for + specifying Tunnel/Trunk Id. + For Flow based mirroring this object can be Acl Ids." + ::= { issMirrorCtrlExtnSrcEntry 1 } + +issMirrorCtrlExtnSrcCfg OBJECT-TYPE + SYNTAX INTEGER{ + add(1), + delete(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object is used to create/delete a source entry for a session." + ::= { issMirrorCtrlExtnSrcEntry 2 } + +issMirrorCtrlExtnSrcMode OBJECT-TYPE + SYNTAX INTEGER { + ingress(1), + egress(2), + both(3), + disable(4) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Provides control to set the mode of mirroring. + It can be ingress, egress, both or disable." + DEFVAL { both } + ::= { issMirrorCtrlExtnSrcEntry 3 } + +issMirrorCtrlExtnSrcVlanTable OBJECT-TYPE + SYNTAX SEQUENCE OF IssMirrorCtrlExtnSrcVlanEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table to configure list of vlan source entities for mirroring sessions" + ::= { issMirror 8 } + +issMirrorCtrlExtnSrcVlanEntry OBJECT-TYPE + SYNTAX IssMirrorCtrlExtnSrcVlanEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry appears in this table for each mirroring session." + INDEX { issMirrorCtrlExtnSessionIndex, issMirrorCtrlExtnSrcVlanContext, issMirrorCtrlExtnSrcVlanId } + ::= { issMirrorCtrlExtnSrcVlanTable 1 } + +IssMirrorCtrlExtnSrcVlanEntry ::= + SEQUENCE { + issMirrorCtrlExtnSrcVlanContext + Integer32, + issMirrorCtrlExtnSrcVlanId + Integer32, + issMirrorCtrlExtnSrcVlanCfg + INTEGER, + issMirrorCtrlExtnSrcVlanMode + INTEGER + } + +issMirrorCtrlExtnSrcVlanContext OBJECT-TYPE + SYNTAX Integer32 (1..64) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Specifies the Context Id to which the source entity belongs, this + is used in case of specifying vlan as source. + Value '-1' mean this object is not considered for this mirroring + session." + ::= { issMirrorCtrlExtnSrcVlanEntry 1 } + +issMirrorCtrlExtnSrcVlanId OBJECT-TYPE + SYNTAX Integer32 (1..4094) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Specifies the Vlan id which participates in a mirroring session." + ::= { issMirrorCtrlExtnSrcVlanEntry 2 } + +issMirrorCtrlExtnSrcVlanCfg OBJECT-TYPE + SYNTAX INTEGER{ + add(1), + delete(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object is used to create/delete a vlan entry for a session." + ::= { issMirrorCtrlExtnSrcVlanEntry 3 } + +issMirrorCtrlExtnSrcVlanMode OBJECT-TYPE + SYNTAX INTEGER { + ingress(1), + egress(2), + both(3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Provides control to set the mode of mirroring. + It can be ingerss,Egress or Both." + DEFVAL { both } + ::= { issMirrorCtrlExtnSrcVlanEntry 4 } + +issMirrorCtrlExtnDestinationTable OBJECT-TYPE + SYNTAX SEQUENCE OF IssMirrorCtrlExtnDestinationEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table to configure list of destination entities" + ::= { issMirror 9 } + +issMirrorCtrlExtnDestinationEntry OBJECT-TYPE + SYNTAX IssMirrorCtrlExtnDestinationEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry appears in this table for each destination entity + in a mirroring session." + INDEX { issMirrorCtrlExtnSessionIndex, issMirrorCtrlExtnDestination } + ::= { issMirrorCtrlExtnDestinationTable 1 } + +IssMirrorCtrlExtnDestinationEntry ::= + SEQUENCE { + issMirrorCtrlExtnDestination + Integer32, + issMirrorCtrlExtnDestCfg + INTEGER + } + +issMirrorCtrlExtnDestination OBJECT-TYPE + SYNTAX Integer32 (1..65535) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Specifies the destination port id which participates in a mirroring + session." + ::= { issMirrorCtrlExtnDestinationEntry 1 } + +issMirrorCtrlExtnDestCfg OBJECT-TYPE + SYNTAX INTEGER{ + add (1), + delete (2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object is used to create/delete a destination entry for a session." + ::= { issMirrorCtrlExtnDestinationEntry 2 } + +issCpuMirrorType OBJECT-TYPE + SYNTAX INTEGER { + ingress (1), + egress (2), + both (3), + disable (4) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object is used to set the type of mirroring + to be done for CPU traffic. + When set to 'ingress(1)', enables mirroring of ingress + traffic over CPU port to the CPU mirrored-to port + specified in 'issCpuMirrorToPort'. + When set to 'egress(2)', enables mirroring of egress + traffic over CPU port to the CPU mirrored-to port. + specified in 'issCpuMirrorToPort'. + When set to 'both(3)', enables mirroring of egress and ingress + traffic over CPU port to the CPU mirrored-to port + specified in 'issCpuMirrorToPort'. + When set to 'disable(4)', CPU mirroring configuration will be + removed." + + DEFVAL { disable } + ::= { issMirror 10 } + +issCpuMirrorToPort OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object specifies the physical port to which the CPU traffic specified + by issCpuMirrorType are mirrored." + DEFVAL { 0 } + ::= { issMirror 11 } + +-- ------------------------------------------------------------------ +-- IP Authorized Manager + +issIpAuthMgrTable OBJECT-TYPE + SYNTAX SEQUENCE OF IssIpAuthMgrEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table to configure IP authorized managers in the system." + ::= { issIpAuthMgr 1 } + +issIpAuthMgrEntry OBJECT-TYPE + SYNTAX IssIpAuthMgrEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry in this table represents rules for particular + IP authorized manager." + INDEX { issIpAuthMgrIpAddr, issIpAuthMgrIpMask } + ::= { issIpAuthMgrTable 1 } + +IssIpAuthMgrEntry ::= + SEQUENCE { + issIpAuthMgrIpAddr + IpAddress, + issIpAuthMgrIpMask + IpAddress, + issIpAuthMgrPortList + PortList, + issIpAuthMgrVlanList + OCTET STRING, + issIpAuthMgrOOBPort + TruthValue, + issIpAuthMgrAllowedServices + Integer32, + issIpAuthMgrRowStatus + RowStatus + } + +issIpAuthMgrIpAddr OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Specifies either the Network or Host address from which the switch + can be managed. + An address 0.0.0.0 indicates 'Any Manager'." + ::= { issIpAuthMgrEntry 1 } + +issIpAuthMgrIpMask OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Specifies the IP address mask to be applied on issIpAuthMgrIpAddr. + Value 0.0.0.0 indicates mask for 'Any Manager'." + ::= { issIpAuthMgrEntry 2 } + +issIpAuthMgrPortList OBJECT-TYPE + SYNTAX PortList + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies the port numbers through which the authorized manager can + access the switch. + + By default the authorized manager is allowed to access the switch + through all the ports. + + If a set of ports are configured in the 'PortList', the manager can + access the switch only through the configured ports." + ::= { issIpAuthMgrEntry 3 } + +issIpAuthMgrVlanList OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies the Vlan's in which the IP authorized manager can reside. + By default the manager is allowed to reside in any vlan. + + If a set of vlans are configured in the 'VlanList', the manager can + reside only in the configured vlan set. Access to the switch + will be denied from any other vlan." + ::= { issIpAuthMgrEntry 4 } + +issIpAuthMgrOOBPort OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies whether the authorized manager can access the switch + through OOB Port + By default the manager is denied access to reside on OOB Interface" + DEFVAL { false } + ::= { issIpAuthMgrEntry 5 } + +issIpAuthMgrAllowedServices OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies the allowed services through which the authorized manager can + access the switch. + This object takes bit mask values. The services represented by each bit + position is as given below: + + With bit 0 being the Least Significant Bit, + + Bit0 --> snmp + Bit1 --> telnet + Bit2 --> http + Bit3 --> https + Bit4 --> ssh + + If the particular bit is set to 1,corresponding service is allowed for + the configured manager. + + By default all services are allowed for the configured manager." + + DEFVAL { '1F'h } + ::= { issIpAuthMgrEntry 6 } + +issIpAuthMgrRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object indicates the status of this entry." + ::= { issIpAuthMgrEntry 7 } + + +-- Iss Extension Group ------------------------------------ +-- Rate Control Group --------------------------------------------- -- + +issRateCtrlTable OBJECT-TYPE + SYNTAX SEQUENCE OF IssRateCtrlEntry + MAX-ACCESS not-accessible + STATUS deprecated + DESCRIPTION + "A table to control the rate limiting parameters + either for the entire switch or for each interface in the switch. + This object is deprecated and the corresponding functionality is + met with issRateControl objects in fsissext.mib." + ::= { issRateControl 1 } + +issRateCtrlEntry OBJECT-TYPE + SYNTAX IssRateCtrlEntry + MAX-ACCESS not-accessible + STATUS deprecated + DESCRIPTION + "An entry appears in this table for each physical + interface in the switch. + This object is deprecated and the corresponding functionality is + met with issRateControl objects in fsissext.mib." + INDEX { issRateCtrlIndex } + ::= { issRateCtrlTable 1 } + +IssRateCtrlEntry ::= + SEQUENCE { + issRateCtrlIndex + Integer32, + issRateCtrlDLFLimitValue + Integer32, + issRateCtrlBCASTLimitValue + Integer32, + issRateCtrlMCASTLimitValue + Integer32, + issRateCtrlPortRateLimit + Integer32, + issRateCtrlPortBurstSize + Integer32 + } + +issRateCtrlIndex OBJECT-TYPE + SYNTAX Integer32 (1..65535) + MAX-ACCESS not-accessible + STATUS deprecated + DESCRIPTION + "The interface index for which the configuration in this + entry applies. + This object is deprecated and the corresponding functionality is + met with issRateControl objects in fsissext.mib." + ::= { issRateCtrlEntry 1 } + +issRateCtrlDLFLimitValue OBJECT-TYPE + SYNTAX Integer32 (0..2147483647) + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "Allows to configure the limiting value for the maximum number + of dlf packets that can be transmitted per second over this interface. + Setting this object to the value zero disables rate limiting for + Destination lookup failure packets on this interface. The value that + can be set for this object is limited by the underlying hardware + This object is deprecated and the corresponding functionality is + met with issRateControl objects in fsissext.mib." + + DEFVAL {0} + ::= { issRateCtrlEntry 2 } + +issRateCtrlBCASTLimitValue OBJECT-TYPE + SYNTAX Integer32 (0..2147483647) + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "Allows to configure the limiting value for the maximum number + of broadcast packets that can be transmitted per second over this + interface. Setting this object to the value zero disables rate + limiting for Broadcast packets on this interface. The value that + can be set for this object is limited by the underlying hardware + This object is deprecated and the corresponding functionality is + met with issRateControl objects in fsissext.mib." + + DEFVAL {0} + ::= { issRateCtrlEntry 3 } + + +issRateCtrlMCASTLimitValue OBJECT-TYPE + SYNTAX Integer32 (0..2147483647) + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "Allows to configure the limiting value for the maximum number + of multicast packets that can be transmitted per second over this + interface. Setting this object to the value zero disables rate + limiting for Multicast packets on this interface. The value that + can be set for this object is limited by the underlying hardware + This object is deprecated and the corresponding functionality is + met with issRateControl objects in fsissext.mib." + + DEFVAL {0} + ::= { issRateCtrlEntry 4} + +issRateCtrlPortRateLimit OBJECT-TYPE + SYNTAX Integer32 (0..80000000) + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "Configures interface Rate Limit (Packet that can be transferred + on a port at a particular second). + + This object's value will take effect on the interface speed. Based + on the operating speed of the port, the rate limit will be applied. + This value can also be affected by the metering. A value of zero(0) + disable rate limiting i.e. sets the port to full speed. + This object is deprecated and the corresponding functionality is + met with issRateControl objects in fsissext.mib." + + ::= { issRateCtrlEntry 5 } + +issRateCtrlPortBurstSize OBJECT-TYPE + SYNTAX Integer32 (0..80000000) + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "Configures interface Burst Pkt Rate. (Packet Burst that can be + transferred on a port at a particular second) + + This object's value will take effect on the interface speed. Based + on the operating speed of the port, the burst size of the port + will be applied. This value can also be affected by the metering. A + value of zero(0) disable burst rate limiting i.e. sets the port burst + rate limit to full speed. + This object is deprecated and the corresponding functionality is + met with issRateControl objects in fsissext.mib." + + ::= { issRateCtrlEntry 6 } + + + + +-- ------------------------------------------------------------------ +-- L2 Filter Group -------------------------------------------------- + +issL2FilterTable OBJECT-TYPE + + SYNTAX SEQUENCE OF IssL2FilterEntry + MAX-ACCESS not-accessible + STATUS deprecated + DESCRIPTION + "A table to configure L2 filter rules in the system. + This object is deprecated and the corresponding functionality is + met with issL2Filter objects in fsissext.mib." + ::= { issL2Filter 1 } + +issL2FilterEntry OBJECT-TYPE + SYNTAX IssL2FilterEntry + MAX-ACCESS not-accessible + STATUS deprecated + DESCRIPTION + "Each entry in this table is a L2 filter rule.Index to the table + is the L2 filter number.This object is deprecated and the + corresponding functionality is met with issL2Filter objects + in fsissext.mib." + + INDEX { issL2FilterNo} + ::= { issL2FilterTable 1 } + +IssL2FilterEntry ::= + SEQUENCE { + issL2FilterNo + Integer32, + issL2FilterPriority + Integer32, + issL2FilterEtherType + Integer32, + issL2FilterProtocolType + Unsigned32, + issL2FilterDstMacAddr + MacAddress, + issL2FilterSrcMacAddr + MacAddress, + issL2FilterVlanId + Integer32, + issL2FilterInPortList + PortList, + issL2FilterAction + INTEGER, + issL2FilterMatchCount + Counter32, + issL2FilterStatus + RowStatus, + issL2FilterOutPortList + PortList, + issL2FilterDirection + INTEGER + + } + +issL2FilterNo OBJECT-TYPE + SYNTAX Integer32 (1..65535) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "L2 Filter rule number. + This object is deprecated and the corresponding functionality is + met with issL2Filter objects in fsissext.mib." + ::= { issL2FilterEntry 1 } + +issL2FilterPriority OBJECT-TYPE + SYNTAX Integer32 (1..255) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The priority of the L2 filter can be used to decide which filter rule + is applicable when + --> the packet matches with more than one filter rules + --> All the filter rules result in 'allow'ing the packet + + Higher value of 'filter priority' implies a higher priority. + + Usage of 'L2FilterPriority' is implementation dependant. + This object is deprecated and the corresponding functionality is + met with issL2Filter objects in fsissext.mib." + DEFVAL { 1 } + ::= { issL2FilterEntry 2 } + +issL2FilterEtherType OBJECT-TYPE + SYNTAX Integer32 (0..65535) + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "The value in the Type/Len field of a frame that will + be matched to trigger this filter. The default value of + this object is '0'. When this object is SET with the default + value, frames are not matched for the value in the Type/Len + field with the value set for this object. + This object is deprecated and the corresponding functionality is + met with issL2Filter objects in fsissext.mib." + DEFVAL { 0 } + ::= { issL2FilterEntry 3 } + + +issL2FilterProtocolType OBJECT-TYPE + SYNTAX Unsigned32 (0..65535) + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "Specifies the non IP protocol type to be filtered. + aarp | amber | dec-spanning | decnet-iv | + diagnostic | dsm |etype-6000 | etype-8042 | + lat | lavc-sca | mop-console | mop-dump | + msdos | mumps | netbios | vines-echo | + vines-ip | xns-idp: A non-IP protocol. + + A value of '0' means, the filter is applicable for all protocols. + This object is deprecated and the corresponding functionality is + met with issL2Filter objects in fsissext.mib." + DEFVAL { 0 } + ::= { issL2FilterEntry 4 } + +issL2FilterDstMacAddr OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "Destination MAC address to be matched with the packet. By Default, the + Destination Mac Address will be zero which means dont care condition ie) + any Dst Mac Address .This object is deprecated and the corresponding + functionality is met with issL2Filter objects in fsissext.mib." + ::= { issL2FilterEntry 5 } + +issL2FilterSrcMacAddr OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "Source MAC address to be matched with the packet. By Default, the Source + Mac Address will be zero which means dont care condition ie) any Src Mac + address This object is deprecated and the corresponding functionality is + met with issL2Filter objects in fsissext.mib." + ::= { issL2FilterEntry 6 } + + +issL2FilterVlanId OBJECT-TYPE + SYNTAX Integer32 (0..4094) + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "Vlan Id to be filtered. In case of Provider bridges, This Vlan Id will + be treated as customer Vlan Id. + A value of '0' means, this object is unused. Configuring this value is not + allowed. + This object is deprecated and the corresponding functionality is + met with issL2Filter objects in fsissext.mib." + DEFVAL { 0 } + ::= { issL2FilterEntry 7 } + + +issL2FilterInPortList OBJECT-TYPE + SYNTAX PortList + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "Specifies the complete set of ports over which this filter is applied + for packets ingress at ports in this list. + If the In port list is '0', the filter rule is applicable for the + incoming packets on all ports. + Even though the issL2FilterInPortList is configured, It is applicable only + if issL2FilterDirection is configured as 'in'. + By default inport list is maintained as '0'. + This object is deprecated and the corresponding functionality is + met with issL2Filter objects in fsissext.mib." + ::= { issL2FilterEntry 8 } + +issL2FilterAction OBJECT-TYPE + SYNTAX INTEGER { + allow (1), + drop (2) + } + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "Specifies the action to be taken on the packet if the filter + rule matches. + If the action is 'allow', the packet will be forwarded according + to the forwarding rules. + If the action is 'drop', the packet will be discarded. + This object is deprecated and the corresponding functionality is + met with issL2Filter objects in fsissext.mib." + DEFVAL { allow } + ::= { issL2FilterEntry 9 } + +issL2FilterMatchCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "Number of times this filter is matched. + This object is deprecated and the corresponding functionality is + met with issL2Filter objects in fsissext.mib." + + ::= { issL2FilterEntry 10 } + +issL2FilterStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS deprecated + DESCRIPTION + "This object indicates the status of this entry. An entry is + created in this table when this object is SET to 'createAndWait'. + The entry in this table is used when the status of this object + is SET 'active'. The entry in this table is not used when this + object is SET 'notInService'. An entry created in this table is + be deleted when this object is SET 'destroy'. + This object is deprecated and the corresponding functionality is + met with issL2Filter objects in fsissext.mib." + ::= { issL2FilterEntry 11 } + +issL2FilterOutPortList OBJECT-TYPE + SYNTAX PortList + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "Specifies the complete set of ports over which this filter is applied + for packets egress at Ports in this list. + If the Out port list is '0', the filter rule is applicable for the + outgoing packets on all ports. + Even though the issL2FilterOutPortList is configured, It is applicable only + if issL2FilterDirection is configured as 'out'. + By default outport list is maintained as '0'. + This object is deprecated and the corresponding functionality is + met with issL2Filter objects in fsissext.mib." + ::= { issL2FilterEntry 12 } + +issL2FilterDirection OBJECT-TYPE + SYNTAX INTEGER { + in (1), + out (2) + } + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "Specifies the direction of this filter to be applied. By Default the + filter will be applied on ingress direction. + When the direction of this filter is 'in', It is applied on specified + ports of the issL2FilterInPortList. + When the direction of this filter is 'out', It is applied on specified + ports of the issL2FilterOutPortList. + This object is deprecated and the corresponding functionality is + met with issL2Filter objects in fsissext.mib." + DEFVAL { in } + ::= { issL2FilterEntry 13 } + +-- ------------------------------------------------------------------ +-- L3 Filter Group -------------------------------------------------- + + +issL3FilterTable OBJECT-TYPE + SYNTAX SEQUENCE OF IssL3FilterEntry + MAX-ACCESS not-accessible + STATUS deprecated + DESCRIPTION + " A table to configure L3 filter rules in the system. + This object is deprecated and the corresponding functionality is + met with issL3Filter objects in fsissext.mib." + ::= { issL3Filter 1 } + +issL3FilterEntry OBJECT-TYPE + SYNTAX IssL3FilterEntry + MAX-ACCESS not-accessible + STATUS deprecated + DESCRIPTION + " Each entry in this table is a L3 filter rule. + Index to the table is L3 filter number. + This object is deprecated and the corresponding functionality is + met with issL3Filter objects in fsissext.mib." + INDEX { issL3FilterNo} + ::= { issL3FilterTable 1 } + +IssL3FilterEntry ::= + SEQUENCE { + issL3FilterNo + Integer32, + issL3FilterPriority + Integer32, + issL3FilterProtocol + Integer32, + issL3FilterMessageType + Integer32, + issL3FilterMessageCode + Integer32, + issL3FilterDstIpAddr + IpAddress, + issL3FilterSrcIpAddr + IpAddress, + issL3FilterDstIpAddrMask + IpAddress, + issL3FilterSrcIpAddrMask + IpAddress, + issL3FilterMinDstProtPort + Unsigned32, + issL3FilterMaxDstProtPort + Unsigned32, + issL3FilterMinSrcProtPort + Unsigned32, + issL3FilterMaxSrcProtPort + Unsigned32, + issL3FilterInPortList + PortList, + issL3FilterOutPortList + PortList, + issL3FilterAckBit + INTEGER, + issL3FilterRstBit + INTEGER, + issL3FilterTos + Integer32, + issL3FilterDscp + Integer32, + issL3FilterDirection + INTEGER, + issL3FilterAction + INTEGER, + issL3FilterMatchCount + Counter32, + issL3FilterStatus + RowStatus + } + +issL3FilterNo OBJECT-TYPE + SYNTAX Integer32 (1..65535) + MAX-ACCESS not-accessible + STATUS deprecated + DESCRIPTION + "L3 Filter rule number. + This object is deprecated and the corresponding functionality is + met with issL3Filter objects in fsissext.mib." + ::= { issL3FilterEntry 1 } + +issL3FilterPriority OBJECT-TYPE + SYNTAX Integer32 (1..255) + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "The priority of the filter can be used to decide which filter rule + is applicable when + --> the packet matches with more than one filter rules + --> All the filter rules result in 'allow'ing the packet + Higher value of 'L3 filter priority' implies a higher priority. + Usage of 'L3FilterPriority' is implementation dependant. + This object is deprecated and the corresponding functionality is + met with issL3Filter objects in fsissext.mib." + DEFVAL { 1 } + ::= { issL3FilterEntry 2 } + +issL3FilterProtocol OBJECT-TYPE + SYNTAX Integer32 (0..255) + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + " The type of protocol to be checked against the packet. The + default value is 255. If the value is 255, it means that the + protocol type can be anything and it will not be checked to + decide the action. + This object is deprecated and the corresponding functionality is + met with issL3Filter objects in fsissext.mib." + DEFVAL { 255 } + ::= { issL3FilterEntry 3 } + +issL3FilterMessageType OBJECT-TYPE + SYNTAX Integer32 (0..65535) + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + " The message type to be checked against the packet. If the + message type matches with the packet, then the packet will be + dropped / allowed based on the action set in issL3FilterAction. + The default value is 255. It means that message type is not + configured and need not be checked. + Generally the value zero is given as default. But here + zero can be an ICMP Type value. Hence 255 is given as the + default value. + Some ICMP message types are: + echoReply(0), + destinationUnreachable(3), + sourceQuench(4), + redirect(5), + echoRequest(8), + timeExceeded(11), + parameterProblem(12), + timestampRequest(13), + timestampReply(14), + informationRequest(15), + informationReply(16), + addressMaskRequest(17), + addressMaskReply (18), + noICMPType(255) + This object is deprecated and the corresponding functionality is + met with issL3Filter objects in fsissext.mib." + DEFVAL { 255 } + ::= { issL3FilterEntry 4 } + +issL3FilterMessageCode OBJECT-TYPE + SYNTAX Integer32 (0..65535) + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + " The message code to be checked against the packet. If the + packet matches with the message code, then the packet will + be dropped / allowed based on the action set in issL3FilterAction. + The default value is 255. It means that message code is not + configured and need not be checked. Generally the value zero + will be given as default. But here, zero can be an ICMP Code + value. Hence 255 is given as the default value. + Some ICMP message codes are : + networkUnreachable(0), + hostUnreachable(1), + protocolUnreachable(2), + portUnreachable(3), + fragmentNeed(4), + sourceRouteFail(5), + destNetworkUnknown(6), + destHostUnknown(7), + srcHostIsolated(8), + destNetworkAdminProhibited(9), + destHostAdminProhibited(10), + networkUnreachableTOS(11), + hostUnreachableTOS(12), + noICMPCode(255) + This object is deprecated and the corresponding functionality is + met with issL3Filter objects in fsissext.mib." + DEFVAL { 255 } + ::= { issL3FilterEntry 5 } + +issL3FilterDstIpAddr OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "Destination IP address to be matched with the packet. + This object is valid only if the 'issFilterType' is 'l3filter'. + This object is deprecated and the corresponding functionality is + met with issL3Filter objects in fsissext.mib." + DEFVAL { '00000000'h } + ::= { issL3FilterEntry 6 } + +issL3FilterSrcIpAddr OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "Source IP address to be matched with the packet. + This object is valid only if the 'issFilterType' is 'l3filter' + This object is deprecated and the corresponding functionality is + met with issL3Filter objects in fsissext.mib." + DEFVAL { '00000000'h } + ::= { issL3FilterEntry 7 } + +issL3FilterDstIpAddrMask OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "The IP subnet mask for Destination IP address. + This object is valid only if the 'issFilterType' is 'l3filter' + This object is deprecated and the corresponding functionality is + met with issL3Filter objects in fsissext.mib." + DEFVAL { 'FFFFFFFF'h } + ::= { issL3FilterEntry 8 } + +issL3FilterSrcIpAddrMask OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "The IP subnet mask for Source IP address. + This object is valid only if the 'issFilterType' is 'l3filter'. + This object is deprecated and the corresponding functionality is + met with issL3Filter objects in fsissext.mib." + DEFVAL { 'FFFFFFFF'h } + ::= { issL3FilterEntry 9 } + +issL3FilterMinDstProtPort OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "The minimum port in the destination port range. Please note + these ports are the TCP / UDP ports. + This object is deprecated and the corresponding functionality is + met with issL3Filter objects in fsissext.mib." + DEFVAL { 0 } + ::= { issL3FilterEntry 10 } + +issL3FilterMaxDstProtPort OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "The maximum port in the destination port range. Please note + these ports are the TCP / UDP ports. + This object is deprecated and the corresponding functionality is + met with issL3Filter objects in fsissext.mib." + DEFVAL { 65535 } + ::= { issL3FilterEntry 11 } + +issL3FilterMinSrcProtPort OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "The minimum port in the source port range. Please note + these ports are the TCP / UDP ports. + This object is deprecated and the corresponding functionality is + met with issL3Filter objects in fsissext.mib." + DEFVAL { 0 } + ::= { issL3FilterEntry 12 } + +issL3FilterMaxSrcProtPort OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "The maximum port in the source port range. Please note + these ports are the TCP / UDP ports. + This object is deprecated and the corresponding functionality is + met with issL3Filter objects in fsissext.mib." + DEFVAL { 65535 } + ::= { issL3FilterEntry 13 } + +issL3FilterInPortList OBJECT-TYPE + SYNTAX PortList + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "Specifies the complete set of ports over which if the packet arrives + this filter rule will be applicable. + If the incoming port list is '0', the filter rule is applicable for all the + incoming ports. + By default inport list is maintained as '0'. + This object is deprecated and the corresponding functionality is + met with issL3Filter objects in fsissext.mib." + ::= { issL3FilterEntry 14 } + +issL3FilterOutPortList OBJECT-TYPE + SYNTAX PortList + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "Specifies the complete set of ports over which if the packet goes out, + this filter rule will be applicable. + If the outgoing port list is '0',the filter rule is applicable for all the + outgoing packets in all ports. + By default outport list is maintained as '0' + This object is deprecated and the corresponding functionality is + met with issL3Filter objects in fsissext.mib." + ::= { issL3FilterEntry 15 } + +issL3FilterAckBit OBJECT-TYPE + SYNTAX INTEGER { + establish(1), + notEstablish(2), + any(3) + } + MAX-ACCESS read-create + STATUS deprecated + DESCRIPTION + " The TCP ACK bit to be checked against the packet. The default + value is 'any'(3). It means that ACK bit will not be checked + to decide the action. + This object is deprecated and the corresponding functionality is + met with issL3Filter objects in fsissext.mib." + DEFVAL { any } + ::= { issL3FilterEntry 16 } + +issL3FilterRstBit OBJECT-TYPE + SYNTAX INTEGER { + set(1), + notSet(2), + any(3) + } + MAX-ACCESS read-create + STATUS deprecated + DESCRIPTION + " The TCP RST bit to be checked against the packet. The default + value is 'any'(3). It means that RST bit will not be checked to + decide the action. + This object is deprecated and the corresponding functionality is + met with issL3Filter objects in fsissext.mib." + DEFVAL { any } + ::= { issL3FilterEntry 17 } + +issL3FilterTos OBJECT-TYPE + SYNTAX Integer32 (-1..7) + MAX-ACCESS read-create + STATUS deprecated + DESCRIPTION + " The IP TOS bit to be checked against the packet. This is a + single byte integer of which the last three bits (least + significant bits) indicate Delay, Throughput and Reliability + i.e 'uuuuudtr', u-unused, d-delay, t-throughput, r-reliability. + For example '6' indicates low delay and high throughput. + A value of '-1' means, the Tos Field becomes dont care + This object is deprecated and the corresponding functionality is + met with issL3Filter objects in fsissext.mib." + DEFVAL { -1 } + ::= { issL3FilterEntry 18 } + +issL3FilterDscp OBJECT-TYPE + SYNTAX Integer32 (-1..63) + MAX-ACCESS read-create + STATUS deprecated + DESCRIPTION + " The IP Dscp value to be checked against the packet. + A value of '-1' means, the Dscp Field becomes dont care. + This object is deprecated and the corresponding functionality is + met with issL3Filter objects in fsissext.mib." + DEFVAL { -1 } + ::= { issL3FilterEntry 19 } + +issL3FilterDirection OBJECT-TYPE + SYNTAX INTEGER { + in (1), + out(2) + } + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "Specifies the direction of this filter to be applied. By Default the + filter will be applied on ingress direction. + When the direction of this filter is 'in', It is applied on specified + ports of the issL3FilterInPortList. + When the direction of this filter is 'out', It is applied on specified + ports of the issL3FilterOutPortList.This object is deprecated and + the corresponding functionality is met with issL3Filter objects in + fsissext.mib." + DEFVAL { in } + ::= { issL3FilterEntry 20 } + +issL3FilterAction OBJECT-TYPE + SYNTAX INTEGER { + allow (1), + drop (2) + } + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "Specifies the action to be taken on the packet if the filter + rule matches. + If the action is 'allow', the packet will be sent to the + ports in 'out port list'. If the out port list is '0', + the port over which the packet is to be switched will be decided + based on further processing on the packet. + If the action is 'drop', the packet will be discardedThis object is + deprecated and the corresponding functionality is + met with issL3Filter objects in fsissext.mib." + DEFVAL { allow } + ::= { issL3FilterEntry 21 } + +issL3FilterMatchCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "Number of times this filter is matched. + This object is deprecated and the corresponding functionality is + met with issL3Filter objects in fsissext.mib." + ::= { issL3FilterEntry 22 } + +issL3FilterStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS deprecated + DESCRIPTION + "This object indicates the status of this entry. An entry is + created in this table when this object is SET to 'createAndWait'. + The entry in this table is used when the status of this object + is SET 'active'. The entry in this table is not used when this + object is SET 'notInService'. An entry created in this table is + be deleted when this object is SET 'destroy.This object is + deprecated and the corresponding functionality is + met with issL3Filter objects in fsissext.mib." + ::= { issL3FilterEntry 23 } + + +-- ------------------------------------------------------------------ +------------------------------------------------------------------ +-- Layer 4 Switching + + +issL4SwitchingFilterTable OBJECT-TYPE + SYNTAX SEQUENCE OF IssL4SwitchingFilterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " A table to L4 Switching rules in the system. + " + ::= { issL4Switching 1 } + +issL4SwitchingFilterEntry OBJECT-TYPE + SYNTAX IssL4SwitchingFilterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " Each entry in this table is a L4 Switching rule. + Index to the table is L4 filter number. " + INDEX { issL4SwitchingFilterNo} + ::= { issL4SwitchingFilterTable 1 } + +IssL4SwitchingFilterEntry ::= + SEQUENCE { + issL4SwitchingFilterNo + Integer32, + issL4SwitchingProtocol + Integer32, + issL4SwitchingPortNo + Unsigned32, + issL4SwitchingCopyToPort + Integer32, + issL4SwitchingFilterStatus + RowStatus + } + +issL4SwitchingFilterNo OBJECT-TYPE + SYNTAX Integer32 (1..65535) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "L4 Switching Filter rule number." + ::= { issL4SwitchingFilterEntry 1 } + + +issL4SwitchingProtocol OBJECT-TYPE + SYNTAX Integer32 (0..255) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The type of protocol to be checked against the packet. The + default value is 255. If the value is 255, it means that the + protocol type can be anything and it will not be checked to + decide the action. " + DEFVAL { 255 } + ::= { issL4SwitchingFilterEntry 2 } + + +issL4SwitchingPortNo OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The Layer 4 port no. Please note + these ports are the TCP / UDP ports." + DEFVAL { 0 } + ::= { issL4SwitchingFilterEntry 3 } + +issL4SwitchingCopyToPort OBJECT-TYPE + SYNTAX Integer32(0..65535) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object is Port to which the packet would be switched" + + ::= { issL4SwitchingFilterEntry 4 } + +issL4SwitchingFilterStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object indicates the status of this entry." + + ::= { issL4SwitchingFilterEntry 5 } + +-- issModule Group BEGINS + +issModuleTable OBJECT-TYPE + SYNTAX SEQUENCE OF IssModuleEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " A table for triggering Graceful shutdown and Start" + ::= { issModule 1 } + +issModuleEntry OBJECT-TYPE + SYNTAX IssModuleEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " Each entry in this table corresponding to one protocol" + INDEX { issModuleId } + ::= { issModuleTable 1 } + +IssModuleEntry ::= + SEQUENCE { + issModuleId + Integer32, + issModuleSystemControl + INTEGER + } + +issModuleId OBJECT-TYPE + SYNTAX Integer32 (1..65535) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This object indicates the ID of the protocol. + Following IDs are supported. + 1. OSPF + 2. OSPFV3 + 3. BGP + 4. ISIS + 5. RSVPTE + 6. LDP " + + ::= { issModuleEntry 1 } + +issModuleSystemControl OBJECT-TYPE + SYNTAX INTEGER { + idle (0), + shutdown (1), -- shutdown the process + start (2) -- start the process + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object shuts and starts the process" + DEFVAL { start } + ::= { issModuleEntry 2 } + +-- issModule Group ENDS + +-- ------------------------------------------------------------------ +--- FAN Table +issSwitchFanTable OBJECT-TYPE + SYNTAX SEQUENCE OF IssSwitchFanEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table containing the Fan information." + ::= { issSwitchFan 1 } + +issSwitchFanEntry OBJECT-TYPE + SYNTAX IssSwitchFanEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Indicates information related to fan status of + the switch." + INDEX { issSwitchFanIndex } + ::= { issSwitchFanTable 1 } + +IssSwitchFanEntry ::= + SEQUENCE { + issSwitchFanIndex Integer32, + issSwitchFanStatus INTEGER + } + +issSwitchFanIndex OBJECT-TYPE + SYNTAX Integer32 (1..5) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the fan number in the switch" + ::= { issSwitchFanEntry 1 } + +issSwitchFanStatus OBJECT-TYPE + SYNTAX INTEGER { + up(1), + down(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the fan status of the switch." + ::= { issSwitchFanEntry 2 } + +----------------------------------------------------------------------- +-- Trap Objects + +issMsrFailedOid OBJECT-TYPE + SYNTAX OBJECT IDENTIFIER + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "Indicates the OID for which updation failure has occured at MSR" + ::= { issSystemTrap 1 } + +issMsrFailedValue OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "Indicates the value of corresponding OID for which updation failure + has occured at MSR" + ::= { issSystemTrap 2 } + +-- Audit Trap Objects + + issAuditTrapEvent OBJECT-TYPE + SYNTAX INTEGER { + openFailed(1), + writeFailed(2), + sizeExceeded(3), + sizeThresholdHit(4) + } + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + " openFailed - Open operation on Audit File failed. + writeFailed - Write operation on Audit File failed. + sizeExceeded - Audit File Size exceeded. + sizeThresholdHit - Audit Log Size Hit the threshold value." + ::= { issAuditTrap 1 } + + issAuditTrapEventTime OBJECT-TYPE + SYNTAX DisplayString(SIZE(24)) + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "This object specifies the date and time at which fsAuditTrapEvent + was performed." + ::= { issAuditTrap 2 } + + issAuditTrapFileName OBJECT-TYPE + SYNTAX DisplayString (SIZE(1..128)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Audit File name in the trap message." + ::= { issAuditTrap 3 } + +-- Log Trap Objects + + issLogTrapEvent OBJECT-TYPE + SYNTAX INTEGER { + openFailed(1), + writeFailed(2), + sizeExceeded(3), + sizeThresholdHit(4) + } + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + " openFailed - Open operation on Log File failed. + writeFailed - Write operation on Log File failed. + sizeExceeded - Log File Size exceeded. + sizeThresholdHit - Log Size Hit the threshold value." + ::= { issLogTrap 1 } + + issLogTrapEventTime OBJECT-TYPE + SYNTAX DisplayString(SIZE(24)) + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "This object specifies the date and time at which fsLogTrapEvent + was performed." + ::= { issLogTrap 2 } + + issLogTrapFileName OBJECT-TYPE + SYNTAX DisplayString (SIZE(1..128)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Log File name in the trap message." + ::= { issLogTrap 3 } + +-- ------------------------------------------------------------------ +-- Iss Notifications + +issTrapConfigRestore NOTIFICATION-TYPE + OBJECTS { + issConfigRestoreStatus + } + STATUS current + DESCRIPTION + "This trap signifies the successful restoration of + the saved configuration" + ::= { issNotifications 1 } + +issMsrUpdateEventFail NOTIFICATION-TYPE + OBJECTS { + issMsrFailedOid, + issMsrFailedValue + } + STATUS current + DESCRIPTION + "An MsrUpdateEventFail notification is sent when there is some + failure in configuration change event received from SNMP Agent. + issMsrFailedOid indicates the OID for which configuration change + event has failed. + issMsrFailedValue indicates the value of the corresponding OID for + which configuration change event failure has occured." + ::= { issNotifications 2 } + +-- AUDIT TRAP MESSAGE +issAuditTrapMessage NOTIFICATION-TYPE + OBJECTS { + issAuditTrapEvent, + issAuditTrapEventTime, + issAuditTrapFileName + } + STATUS current + DESCRIPTION + "This trap notifies the erros on + Audit file." + ::= { issNotifications 3 } + +issTrapTemperature NOTIFICATION-TYPE + OBJECTS { + issSwitchMinThresholdTemperature, + issSwitchMaxThresholdTemperature, + issSwitchCurrentTemperature + } + STATUS current + DESCRIPTION + "This notification is sent when the current + temperature rises above or drops below the threshold." + ::= { issNotifications 4 } + +issTrapCPUThreshold NOTIFICATION-TYPE + OBJECTS { + issSwitchMaxCPUThreshold, + issSwitchCurrentCPUThreshold + } + STATUS current + DESCRIPTION + "This notification is sent when CPU load exceeds + the threshold value" + ::= { issNotifications 5 } + +issTrapPowerSupply NOTIFICATION-TYPE + OBJECTS { + issSwitchPowerSurge, + issSwitchPowerFailure, + issSwitchCurrentPowerSupply + } + STATUS current + DESCRIPTION + "This notification is sent when the current + voltage drops below or exceeds the threshold value" + ::= { issNotifications 6 } + +issTrapRAMUsage NOTIFICATION-TYPE + OBJECTS { + issSwitchMaxRAMUsage, + issSwitchCurrentRAMUsage + } + STATUS current + DESCRIPTION + "This notification is sent when the RAM usage crosses + the threshold percentage." + ::= { issNotifications 7 } + +issTrapFlashUsage NOTIFICATION-TYPE + OBJECTS { + issSwitchMaxFlashUsage, + issSwitchCurrentFlashUsage + } + STATUS current + DESCRIPTION + "This notification is sent when the flash + usage crosses the threshold." + ::= { issNotifications 8 } + +issTrapFanStatus NOTIFICATION-TYPE + OBJECTS { + issSwitchFanIndex, + issSwitchFanStatus + } + STATUS current + DESCRIPTION + "This notification is sent when the fan status is changed + from down state to up state or vice versa." + ::= { issNotifications 9 } + +-- LOG TRAP MESSAGE +issLogTrapMessage NOTIFICATION-TYPE + OBJECTS { + issLogTrapEvent, + issLogTrapEventTime, + issLogTrapFileName + } + STATUS current + DESCRIPTION + "This trap notifies the erros on + System Log file." + ::= { issNotifications 10 } + +-- PAUSE FLOOD SNMP TRAP MESSAGE +issPauseFloodSnmpTrapMessage NOTIFICATION-TYPE + OBJECTS { + issPortCtrlPauseFloodStatus + } + STATUS current + DESCRIPTION + "This object is used to notify the pause flood condition when the pause + flood mode is 'enabled'" + ::= { issNotifications 11 } + +issAclProvisionMode OBJECT-TYPE + SYNTAX INTEGER { + immediate(1), + consolidated(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The MIB object issAclProvisionMode is used to configure the + mode for provisioning active Filter Rules to the hardware. + This object takes values immediate/consolidated. When this + object is set to immediate, active ACL rules are programmed + to hardware immediately. This is the default mode. In this + mode, the sequence of configuration determines the order of + provisioning the Filter rule to the hardware. + When this object is set to consolidated, active Filter Rules + are provisioned whenever a commit is triggered using MIB + object issAclTriggerCommit. In the consolidated mode, the + Filter rules are programmed/re-programmed to hardware in + the order of configured priority." + DEFVAL { immediate } + ::= { issAclNp 1 } + + +issAclTriggerCommit OBJECT-TYPE + SYNTAX INTEGER { + false(0), + true(1) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The MIB object issAclTriggerCommit takes values true(1)/false (0). + A SET on this object ( only true is allowed) triggers the + programming of active ACL entries to the device based on + configured priority.After completion of the operation, this MIB object + is reset to false( 0) .This object is applicable only when the MIB + object issAclProvisionMode is set to ' consolidated. + A set on this object will impact the existing traffic flow as existing + Filter entries are deleted + and re-programmed to hardware based on configured priority. + Filter entries that are associated with quality-of-service configurations + will also be impacted when this object + triggers the re-programming of the active ACL entries to the hardware. + The administrator needs to ensure that corresponding Filter entries are + de-provisioned before triggering commit." + DEFVAL { false } + ::= { issAclNp 2 } + +-- Traffic Control Group ------------------------------------------ -- + +issAclTrafficSeperationCtrl OBJECT-TYPE + SYNTAX INTEGER { + systemdefault (1), + userconfig (2), + none(3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object provides control to administrator, to have system default or + user defined ACL/QoS rules to carry control traffic to CPU. + + system-default: ACL/QoS rules for all the control packets will be + automatically installed by the ISS software at system init time.Either a + 'switch-and-copy-to-cpu'filter (or) 'drop-and-copy-to-cpu' filter will be + installed, as appropriate, for getting the control packets to CPU, for + processing. Each ACL rule will be associated with class-map, meter and + policy map with protocol ID, and CPU queue number + + user-config: The ACL/QoS rules for receiving all the control packets to + CPU for processing, will NOT be automatically installed by the the ISS + software.The administrator is expected to install required rules for the + control packets as requried. + + none: ACL/QoS rules for all the control packets will be automatically + installed by the ISS software at system init time.Either a 'switch-and-co + py-to-cpu'filter (or) 'drop-and-copy-to-cpu' filter will be installed, + as appropriate, for getting the control packets to CPU, for processing. + Default mode is none + + If the configuration is changed from 'systemdefault' to 'userconfig' + option, then all the default ACL/QoS rules for carrying protocol control + packets to CPU are removed.Then user has to install the specific ACL/QoS + rules, to carry the intended control packets to CPU for the processing. + + If the configuration is changed from 'userconfig' to 'systemdefault', + all the default ACL/QoS rules are installed. Already existing(if any) + user configured ACL rules in the system are not removed. + + If the configuration is changed from 'none' to 'systemdefault' + option, then all the default ACL filters for carrying protocol control + packets to CPU are removed and new set of filters will be installed. + Each filter will be associated with Qos rules. + + If the configuration is changed from 'none' to 'userconfig' + option, then all the default ACL filters for carrying protocol control + packets to CPU are removed.Then user has to install the specific ACL/QoS + rules, to carry the intended control packets to CPU for the processing. + + If the configuration is changed from 'userconfig' to 'none' + all the default ACL filters are installed. Already existing(if any) + user configured ACL rules in the system are not removed. + + Above three options can be configured during system runtime." + + DEFVAL { none } + ::= { issAclTrafficControl 1 } + +--ISShealthchk-- + +issHealthChkStatus OBJECT-TYPE + SYNTAX INTEGER { upAndRunning(1), + downNonRecoverableErr(2), + upRecoverableRuntimeErr(3) } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "upAndRunning(1), This status indicates that ISS is up and running + and carrying out its job smoothly. + + downNonRecoverableErr(2), This indicates that the health status of ISS is down + due to occurence of some non-recoverable error. + + upRecoverableRuntimeErr(3), This indicates that the health status of ISS is up + but indicates the occurence of a runtime error that is recoverable." + + + ::= { issHealthCheckGroup 1 } + +issHealthChkErrorReason OBJECT-TYPE + SYNTAX INTEGER { nonRecovTaskInitializationFailure(1), + nonRecovInsufficientStartupMemory(2), + recovCruBuffExhausted(3), + recovConfigRestoreFailed(4), + recovProtocolMemPoolExhausted(5) } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "When the MIB object 'issHealthChkStatus' indicates health as down, this object provides the + reason for errors encountered. + + nonRecovTaskInitializationFailure(1), Indicates the occurence of non-recoverable failure during + Task initialization. + + nonRecovInsufficientStartupMemory(2), Indicates that there is insufficient memory for successful + startup. This error is non-recoverable and requires sufficient memory to be available in the system + for successful ISS startup. + + recovCruBuffExhausted(3), Indicates that CRU Buffer Exhausted. + + recovConfigRestoreFailed(4), Indicates that config-restore failed for ISS. This is a recoverable error. + + recovProtocolMemPoolExhausted(5), Indicates that a mem-pool associated with a specific module in ISS has + drained out. This error may affect the functioning of the specific protocol alone and is treated as + a recoverable error. + + By default issHealthChkErrorReason is 0." + + + ::= { issHealthCheckGroup 2 } + +issHealthChkMemAllocErrPoolId OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object retrieves the mem-pool identifier for which memory allocation + failure was encountered at run-time.This object will get updated when + MIB object fsISSHealthChkErrorReason takes value of recovProtocolMemPoolExhausted (5)." + + ::= { issHealthCheckGroup 3} + +issHealthChkConfigRestoreStatus OBJECT-TYPE + SYNTAX INTEGER { configRestoreSuccess(1), + configRestoreFailed(2), + configRestoreInProgress(3), + configRestoreDefault(4) } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "configRestoreSuccess(1), Indicates that configuration restore operation + was successfully done. + + configRestoreFailed(2),Indicates that configuration restoration was unsuccessful. + + configRestoreInProgress(3), Indicates that configuration restore operation is in-progress for ISS. + + configRestoreDefault(4), Indicates the absence of config-restore file (iss.conf) + and that ISS was started with default values. + + By default issHealthChkConfigRestoreStatus is 4." + + + ::= { issHealthCheckGroup 4} + +issHealthChkClearCtr OBJECT-TYPE + SYNTAX BITS{ + bgp(1), + ospf(2), + rip(3), + rip6(4), + ospf3(5), + ipv4(6), + ipv6(7) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object clears the counters + associated with the following protocols - + BGP, OSPFv2, RIPv2/ng, OSPFv3, RTMv4/v6, ARP/ND, NETIP(v4/v6) + All the bit is set as 1, it clears the specified protocol counters. + bgp(1) When this bit is set,clears bgp protocol counters. + ospf(2) When this bit is set,clears ospf protocol counters. + rip(3) When this bit is set,clears rip protocol counters. + rip6(4) When this bit is set,clears rip6 protocol counters. + ospf3(5) When this bit is set,clears ospf3 protocol counters. + ipv4(6) When this bit is set,clears ipv4 protocol counters. + ipv6(7) When this bit is set,clears ipv6 protocol counters." + + ::= { issHealthCheckGroup 5} + + + + +END |