diff options
| author | David Leutgeb <david.leutgeb@mannundmouse.com> | 2023-12-05 12:25:34 +0100 |
|---|---|---|
| committer | David Leutgeb <david.leutgeb@mannundmouse.com> | 2023-12-05 12:25:34 +0100 |
| commit | 98a672123c7872f6b9b75a9a2b6bb3aea504de6a (patch) | |
| tree | 9b13bd7f563c3198047bd359195327cf28b3caf0 /MIBS/cambium/600 | |
| download | mibs-98a672123c7872f6b9b75a9a2b6bb3aea504de6a.tar.gz mibs-98a672123c7872f6b9b75a9a2b6bb3aea504de6a.zip | |
Diffstat (limited to 'MIBS/cambium/600')
| -rw-r--r-- | MIBS/cambium/600/CAMBIUM-PTP600-MIB | 3779 |
1 files changed, 3779 insertions, 0 deletions
diff --git a/MIBS/cambium/600/CAMBIUM-PTP600-MIB b/MIBS/cambium/600/CAMBIUM-PTP600-MIB new file mode 100644 index 0000000..236e52d --- /dev/null +++ b/MIBS/cambium/600/CAMBIUM-PTP600-MIB @@ -0,0 +1,3779 @@ + CAMBIUM-PTP600-MIB DEFINITIONS ::= BEGIN
+
+ IMPORTS
+ MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
+ Integer32, IpAddress,
+ enterprises
+ FROM SNMPv2-SMI
+ MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
+ FROM SNMPv2-CONF
+ DisplayString
+ FROM SNMPv2-TC
+ InetAddress, InetAddressType
+ FROM INET-ADDRESS-MIB;
+
+ cambium MODULE-IDENTITY
+ LAST-UPDATED "201403041414Z"
+ ORGANIZATION "Cambium Networks Ltd."
+ CONTACT-INFO
+ "Post: Simon Whitaker
+ Cambium Networks Ltd.
+ Unit B2,
+ Linhay Business Park,
+ Eastern Road,
+ Ashburton,
+ Devon.
+ TQ13 7UP
+ United Kingdom
+ Phone: +44 (0) 1364 655 500
+ Email: simon.whitaker@cambiumnetworks.com"
+ DESCRIPTION
+ "MIB for 300Mbps non-line-of-sight (NLOS) wireless ethernet bridge."
+ REVISION "201403041414Z"
+ DESCRIPTION
+ "PTP600-10-07:
+ Reinstated incompatibleRegionCodesTrap.
+ Reinstated incompatibleMasterAndSlaveTrap.
+ Reinstated encryptionEnabledMismatchTrap."
+ REVISION "201309142338Z"
+ DESCRIPTION
+ "PTP600-10-06:
+ Removed incompatibleRegionCodesTrap.
+ Removed incompatibleMasterAndSlaveTrap.
+ Removed encryptionEnabledMismatchTrap."
+ REVISION "201208131812Z"
+ DESCRIPTION
+ "PTP600-10-04:
+ Added ethernetBridgingStatus, ethernetBridgingAvailability.
+ Added ethernetBridgingStatusAlarm, ethernetBridgingStatusAlarmTrap."
+ REVISION "201205011158Z"
+ DESCRIPTION
+ "PTP600-10-03: make linkName & groupID read-write."
+ REVISION "201202131238Z"
+ DESCRIPTION
+ "PTP600-10-01: Updated ORGANIZATION and CONTACT-INFO."
+ REVISION "201111081347Z"
+ DESCRIPTION
+ "PTP600-10-00:
+ Added new SNTP attributes, replace syslogLocalLog with syslogState. Add L2/L3 QoS attributes.
+ Added securityLevel. Renamed vLANPriorityQueueMapping with ethernetPriorityQueueMapping.
+ Added syslogClient and secureModeAlarm traps."
+ REVISION "201012071328Z"
+ DESCRIPTION "PTP600-09-10: Added searchState, accessMethod and groupID."
+ REVISION "201011021333Z"
+ DESCRIPTION "PTP600-09-02: Added latitude, longitude, altitude."
+ REVISION "201007161541Z"
+ DESCRIPTION
+ "PTP600-09-01:
+ Changed root OID.
+ Renamed ethernet & fiber attributes & traps.
+ Replaced vLANManagementVIDValidation with managementMode.
+ Added linkName, siteName, hTTPSAccessEnabled, tDDSynchronizationMode.
+ Added syslog attributes & traps.
+ Added SNMPTrapTable for dual trap receivers."
+ REVISION "201004231007Z"
+ DESCRIPTION "PTP600-08-50: Security enhancements."
+ REVISION "201002191855Z"
+ DESCRIPTION "PTP600-08-04: Added SNMPv3 support, DFS Table, Automatic Tx Power Control. BIT STRING types now OCTET STRING."
+ REVISION "200907101520Z"
+ DESCRIPTION "PTP600-08-03: Added VLAN Priority Table, more read-only attributes, plus alarm tidy-up."
+ REVISION "200902271711Z"
+ DESCRIPTION "PTP600-08-01: Improve TDD Synchronization status and alarms."
+ REVISION "200812151219Z"
+ DESCRIPTION "PTP600-08-00: Support 4.8 & 4.9 GHz variant & 20 MHz bandwidth, Link Symmetry, TDD Synchronization."
+ REVISION "200806301016Z"
+ DESCRIPTION "PTP600-07-00: Added IEEE 802.1q & 802.1ad VLAN support."
+ REVISION "200802290942Z"
+ DESCRIPTION "PTP600-06-00: Added OOB, HTTP & telnet access controls."
+ REVISION "200707311839Z"
+ DESCRIPTION "PTP600-05-00: Added groups, attributes and notifications for diagnostic alarms."
+ REVISION "200611231436Z"
+ DESCRIPTION "PTP600-04-00: Converted to SMIv2."
+ REVISION "200607241008Z"
+ DESCRIPTION "PTP600-03-01"
+ ::= { enterprises 17713 }
+
+ -- Groups in cambium
+ ptp OBJECT IDENTIFIER ::= { cambium 1 }
+ ptmp OBJECT IDENTIFIER ::= { cambium 2 }
+ ptp600 OBJECT IDENTIFIER ::= { cambium 6 }
+
+ -- Groups in ptp600
+ dfs OBJECT IDENTIFIER ::= { ptp600 3 }
+ bridge OBJECT IDENTIFIER ::= { ptp600 4 }
+ configuration OBJECT IDENTIFIER ::= { ptp600 5 }
+ ethernet OBJECT IDENTIFIER ::= { ptp600 6 }
+ telecom OBJECT IDENTIFIER ::= { ptp600 7 }
+ licence OBJECT IDENTIFIER ::= { ptp600 8 }
+ management OBJECT IDENTIFIER ::= { ptp600 9 }
+ phyControl OBJECT IDENTIFIER ::= { ptp600 10 }
+ phyStatus OBJECT IDENTIFIER ::= { ptp600 12 }
+ alarms OBJECT IDENTIFIER ::= { ptp600 13 }
+ smtp OBJECT IDENTIFIER ::= { ptp600 15 }
+ snmpControl OBJECT IDENTIFIER ::= { ptp600 16 }
+ sntp OBJECT IDENTIFIER ::= { ptp600 17 }
+ reset OBJECT IDENTIFIER ::= { ptp600 18 }
+ versions OBJECT IDENTIFIER ::= { ptp600 19 }
+ pubStats OBJECT IDENTIFIER ::= { ptp600 20 }
+ encryption OBJECT IDENTIFIER ::= { ptp600 22 }
+ tDDControl OBJECT IDENTIFIER ::= { ptp600 23 }
+ aAAControl OBJECT IDENTIFIER ::= { ptp600 25 }
+ syslogControl OBJECT IDENTIFIER ::= { ptp600 24 }
+ supplementary OBJECT IDENTIFIER ::= { ptp600 96 }
+ ptpGroups OBJECT IDENTIFIER ::= { ptp600 98 }
+ ptpTraps OBJECT IDENTIFIER ::= { ptp600 99 }
+ ptpTrapPrefix OBJECT IDENTIFIER ::= { ptpTraps 0 }
+
+ -- Compliance information
+ --
+ ptpCompliance MODULE-COMPLIANCE
+ STATUS current
+ DESCRIPTION
+ "The compliance statement for the Cambium PTP MIB"
+ MODULE -- this module
+ MANDATORY-GROUPS { dfsGroup
+ , bridgeGroup
+ , configurationGroup
+ , ethernetGroup
+ , telecomGroup
+ , licenceGroup
+ , managementGroup
+ , phyControlGroup
+ , phyStatusGroup
+ , alarmsGroup
+ , smtpGroup
+ , snmpControlGroup
+ , sntpGroup
+ , resetGroup
+ , versionsGroup
+ , pubStatsGroup
+ , encryptionGroup
+ , tDDControlGroup
+ , aAAControlGroup
+ , syslogControlGroup
+ , supplementaryGroup
+ , notificationsGroup
+ }
+ ::= { ptp600 97 }
+
+ dfsGroup OBJECT-GROUP
+ OBJECTS { dfsTableNumber
+ , dfsMeans
+ , dfsNineNinePointNinePercentiles
+ , dfsPeaks
+ }
+ STATUS current
+ DESCRIPTION "The dfs object group."
+ ::= { ptpGroups 3 }
+
+ bridgeGroup OBJECT-GROUP
+ OBJECTS { localPacketFiltering
+ }
+ STATUS current
+ DESCRIPTION "The bridge object group."
+ ::= { ptpGroups 4 }
+
+ configurationGroup OBJECT-GROUP
+ OBJECTS { iPv4Address
+ , subnetMask
+ , gatewayIPAddress
+ , targetMACAddress
+ , masterSlaveMode
+ , maximumTransmitPower
+ , antennaGain
+ , cableLoss
+ , eIRP
+ , ethernetCappedMaxWirelessSpeed
+ , channelBandwidth
+ , remoteIPAddress
+ , linkName
+ , siteName
+ , accessMethod
+ , groupID
+ , iPv6Address
+ , iPVersion
+ , iPv6AutoConfiguredLinkLocalAddress
+ , iPv6PrefixLength
+ , iPv6GatewayAddress
+ , remoteInternetAddressType
+ , remoteInternetAddress
+ }
+ STATUS current
+ DESCRIPTION "The configuration object group."
+ ::= { ptpGroups 5 }
+
+ ethernetGroup OBJECT-GROUP
+ OBJECTS { dataPortAutoNegotiation
+ , dataPortAutoNegAdvertisement
+ , dataPortAutoMdix
+ , dataPortStatus
+ , dataPortSpeedAndDuplex
+ , dataPortWirelessDownAlert
+ , useVLANForManagementInterfaces
+ , vLANManagementPriority
+ , vLANManagementVID
+ , managementPortStatus
+ , managementPortSpeedAndDuplex
+ , ethernetPriorityTableNumber
+ , l2CPPriorityTableNumber
+ , iPDSCPPriorityTableNumber
+ , mPLSTCPriorityTableNumber
+ , managementMode
+ , managementPortWirelessDownAlert
+ , qOSPriorityScheme
+ , unknownNetworkPriorityQueueMapping
+ , dSCPManagementPriority
+ , ethernetBridgingStatus
+ , ethernetPriorityQueueMapping
+ , l2CPPriorityQueueMapping
+ , iPDSCPPriorityQueueMapping
+ , mPLSTCPriorityQueueMapping
+ }
+ STATUS current
+ DESCRIPTION "The ethernet object group."
+ ::= { ptpGroups 6 }
+
+ telecomGroup OBJECT-GROUP
+ OBJECTS { telecomsInterface
+ , telecomsChannelAStatus
+ , telecomsChannelBStatus
+ , channelALineCode
+ , channelBLineCode
+ , channelACableLength
+ , channelBCableLength
+ , channelALoopback
+ , channelBLoopback
+ , telecomsChannelSelection
+ }
+ STATUS current
+ DESCRIPTION "The telecom object group."
+ ::= { ptpGroups 7 }
+
+ licenceGroup OBJECT-GROUP
+ OBJECTS { regionCode
+ , productVariant
+ , productName
+ , ethernetFiberSupport
+ , frequencyVariant
+ , bandwidthVariant
+ , constantPowerSpectralDensity
+ , sNMPv3Enable
+ , hAZLOCConfiguration
+ , securityLevel
+ }
+ STATUS current
+ DESCRIPTION "The licence object group."
+ ::= { ptpGroups 8 }
+
+ managementGroup OBJECT-GROUP
+ OBJECTS { targetRange
+ , rangingMode
+ , installStatus
+ , installArmState
+ , tFTPServerIPAddress
+ , tFTPServerPortNumber
+ , tFTPSoftwareUpgradeFileName
+ , tFTPStartSoftwareUpgrade
+ , tFTPSoftwareUpgradeStatus
+ , tFTPSoftwareUpgradeStatusText
+ , tFTPSoftwareUpgradeStatusAdditionalText
+ , hTTPAccessEnabled
+ , telnetAccessEnabled
+ , hTTPPortNumber
+ , hTTPSPortNumber
+ , telnetPortNumber
+ , hTTPSAccessEnabled
+ , tFTPServerInternetAddressType
+ , tFTPServerInternetAddress
+ }
+ STATUS current
+ DESCRIPTION "The management object group."
+ ::= { ptpGroups 9 }
+
+ phyControlGroup OBJECT-GROUP
+ OBJECTS { linkSymmetry
+ , linkModeOptimisation
+ , userConfiguredMaxModulationMode
+ , remoteMaximumTransmitPower
+ , txColorCode
+ , rxColorCode
+ , automaticTxPowerControl
+ , remoteRxTargetPower
+ }
+ STATUS current
+ DESCRIPTION "The phyControl object group."
+ ::= { ptpGroups 10 }
+
+ phyStatusGroup OBJECT-GROUP
+ OBJECTS { receivePower
+ , vectorError
+ , transmitPower
+ , range
+ , linkLoss
+ , receiveChannel
+ , transmitChannel
+ , receiveModulationMode
+ , transmitModulationMode
+ , receiveFreqMHz
+ , transmitFreqMHz
+ , signalStrengthRatio
+ , receiveFreqKHz
+ , transmitFreqKHz
+ , searchState
+ , rawReceivePower
+ }
+ STATUS current
+ DESCRIPTION "The phyStatus object group."
+ ::= { ptpGroups 12 }
+
+ alarmsGroup OBJECT-GROUP
+ OBJECTS { unitOutOfCalibration
+ , incompatibleRegionCodes
+ , noWirelessChannelAvailable
+ , wirelessLinkDisabledWarning
+ , dataPortDisabledWarning
+ , dataPortFiberStatus
+ , dataPortConfigurationMismatch
+ , incompatibleMasterAndSlave
+ , tDDSynchronizationStatus
+ , managementPortDisabledWarning
+ , tDDSynchronizationAlarm
+ , linkModeOptimizationMismatch
+ , managementPortConfigurationMismatch
+ , secureModeAlarm
+ , ethernetBridgingStatusAlarm
+ }
+ STATUS current
+ DESCRIPTION "The alarms object group."
+ ::= { ptpGroups 13 }
+
+ smtpGroup OBJECT-GROUP
+ OBJECTS { sMTPEmailAlert
+ , sMTPServerIPAddress
+ , sMTPServerPortNumber
+ , sMTPSourceEmailAddress
+ , sMTPDestinationEmailAddress
+ , sMTPEnabledMessages
+ , sMTPServerInternetAddressType
+ , sMTPServerInternetAddress
+ }
+ STATUS current
+ DESCRIPTION "The smtp object group."
+ ::= { ptpGroups 15 }
+
+ snmpControlGroup OBJECT-GROUP
+ OBJECTS { sNMPPortNumber
+ , sNMPCommunityString
+ , sNMPTrapTableNumber
+ , sNMPTrapVersion
+ , sNMPEnabledTraps
+ , enabledDiagnosticAlarms
+ , sNMPSendAllTrapsAtStartup
+ , sNMPTrapIPAddress
+ , sNMPTrapPortNumber
+ , sNMPTrapInternetAddressType
+ , sNMPTrapInternetAddress
+ , sNMPTrapReceiverEnabled
+ }
+ STATUS current
+ DESCRIPTION "The snmpControl object group."
+ ::= { ptpGroups 16 }
+
+ sntpGroup OBJECT-GROUP
+ OBJECTS { sNTPState
+ , sNTPPollInterval
+ , sNTPSync
+ , sNTPLastSync
+ , systemClock
+ , timeZone
+ , daylightSaving
+ , sNTPPrimaryServer
+ , sNTPPrimaryServerDeadTime
+ , sNTPServerRetries
+ , sNTPServerTimeout
+ , sNTPServerTableNumber
+ , sNTPServerIPAddress
+ , sNTPServerPortNumber
+ , sNTPServerStatus
+ , sNTPServerInternetAddressType
+ , sNTPServerInternetAddress
+ }
+ STATUS current
+ DESCRIPTION "The sntp object group."
+ ::= { ptpGroups 17 }
+
+ resetGroup OBJECT-GROUP
+ OBJECTS { systemReset
+ }
+ STATUS current
+ DESCRIPTION "The reset object group."
+ ::= { ptpGroups 18 }
+
+ versionsGroup OBJECT-GROUP
+ OBJECTS { softwareVersion
+ , hardwareVersion
+ , secondarySoftwareVersion
+ , bootVersion
+ }
+ STATUS current
+ DESCRIPTION "The versions object group."
+ ::= { ptpGroups 19 }
+
+ pubStatsGroup OBJECT-GROUP
+ OBJECTS { receiveDataRate
+ , transmitDataRate
+ , aggregateDataRate
+ , wirelessLinkAvailability
+ , wirelessLinkStatus
+ , byteErrorRatio
+ , receiveModulationModeDetail
+ , ethernetBridgingAvailability
+ }
+ STATUS current
+ DESCRIPTION "The pubStats object group."
+ ::= { ptpGroups 20 }
+
+ encryptionGroup OBJECT-GROUP
+ OBJECTS { encryptionAlgorithm
+ }
+ STATUS current
+ DESCRIPTION "The encryption object group."
+ ::= { ptpGroups 22 }
+
+ tDDControlGroup OBJECT-GROUP
+ OBJECTS { tDDSynchronizationMode
+ }
+ STATUS current
+ DESCRIPTION "The tDDControl object group."
+ ::= { ptpGroups 23 }
+
+ aAAControlGroup OBJECT-GROUP
+ OBJECTS { userTableNumber
+ , userName
+ , userRole
+ , userEnabled
+ , userPassword
+ }
+ STATUS current
+ DESCRIPTION "The aAAControl object group."
+ ::= { ptpGroups 25 }
+
+ syslogControlGroup OBJECT-GROUP
+ OBJECTS { syslogClient
+ , syslogState
+ }
+ STATUS current
+ DESCRIPTION "The syslogControl object group."
+ ::= { ptpGroups 24 }
+
+ supplementaryGroup OBJECT-GROUP
+ OBJECTS { longitude
+ , latitude
+ , altitude
+ }
+ STATUS current
+ DESCRIPTION "The supplementary object group."
+ ::= { ptpGroups 96 }
+
+ notificationsGroup NOTIFICATION-GROUP
+ NOTIFICATIONS { channelChangeTrap
+ , dfsImpulsiveInterferenceTrap
+ , dataPortStatusTrap
+ , telecomsChannelAStatusTrap
+ , telecomsChannelBStatusTrap
+ , channelALoopbackTrap
+ , channelBLoopbackTrap
+ , regionCodeTrap
+ , installStatusTrap
+ , installArmStateTrap
+ , unitOutOfCalibrationTrap
+ , incompatibleRegionCodesTrap
+ , noWirelessChannelAvailableTrap
+ , wirelessLinkDisabledWarningTrap
+ , dataPortDisabledWarningTrap
+ , dataPortFiberStatusTrap
+ , dataPortConfigurationMismatchTrap
+ , incompatibleMasterAndSlaveTrap
+ , sNTPSyncTrap
+ , tDDSynchronizationAlarmTrap
+ , managementPortStatusTrap
+ , managementPortDisabledWarningTrap
+ , linkModeOptimizationMismatchTrap
+ , managementPortConfigurationMismatchTrap
+ , syslogStateTrap
+ , syslogLocalNearlyFullTrap
+ , syslogLocalWrappedTrap
+ , syslogClientTrap
+ , secureModeAlarmTrap
+ , ethernetBridgingStatusAlarmTrap
+ }
+ STATUS current
+ DESCRIPTION "The notifications group."
+ ::= { ptpGroups 99 }
+
+
+ DfsTableEntry ::=
+ SEQUENCE { dfsTableIndex INTEGER
+ , dfsMeans Integer32
+ , dfsNineNinePointNinePercentiles Integer32
+ , dfsPeaks Integer32
+ }
+
+ dfsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF DfsTableEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ " A table storing a snapshot of various DFS measurements for each channel"
+ ::= { dfs 2 }
+
+ dfsTableEntry OBJECT-TYPE
+ SYNTAX DfsTableEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table DfsTable"
+ INDEX { dfsTableIndex }
+ ::= { dfsTable 1 }
+
+ EthernetPriorityTableEntry ::=
+ SEQUENCE { ethernetPriorityTableIndex INTEGER
+ , ethernetPriorityQueueMapping INTEGER
+ }
+
+ ethernetPriorityTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF EthernetPriorityTableEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ " A priority queue mapping table. This is a list of packet queues indexed by Ethernet priority."
+ ::= { ethernet 15 }
+
+ ethernetPriorityTableEntry OBJECT-TYPE
+ SYNTAX EthernetPriorityTableEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table EthernetPriorityTable"
+ INDEX { ethernetPriorityTableIndex }
+ ::= { ethernetPriorityTable 1 }
+
+ L2CPPriorityTableEntry ::=
+ SEQUENCE { l2CPPriorityTableIndex INTEGER
+ , l2CPPriorityQueueMapping INTEGER
+ }
+
+ l2CPPriorityTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF L2CPPriorityTableEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ " A priority queue mapping table. This is a list of packet queues indexed by L2CP priority."
+ ::= { ethernet 17 }
+
+ l2CPPriorityTableEntry OBJECT-TYPE
+ SYNTAX L2CPPriorityTableEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table L2CPPriorityTable"
+ INDEX { l2CPPriorityTableIndex }
+ ::= { l2CPPriorityTable 1 }
+
+ IPDSCPPriorityTableEntry ::=
+ SEQUENCE { iPDSCPPriorityTableIndex INTEGER
+ , iPDSCPPriorityQueueMapping INTEGER
+ }
+
+ iPDSCPPriorityTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF IPDSCPPriorityTableEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ " A priority queue mapping table. This is a list of packet queues indexed by L3 IP DSCP priority."
+ ::= { ethernet 19 }
+
+ iPDSCPPriorityTableEntry OBJECT-TYPE
+ SYNTAX IPDSCPPriorityTableEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table IPDSCPPriorityTable"
+ INDEX { iPDSCPPriorityTableIndex }
+ ::= { iPDSCPPriorityTable 1 }
+
+ MPLSTCPriorityTableEntry ::=
+ SEQUENCE { mPLSTCPriorityTableIndex INTEGER
+ , mPLSTCPriorityQueueMapping INTEGER
+ }
+
+ mPLSTCPriorityTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF MPLSTCPriorityTableEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ " A priority queue mapping table. This is a list of priority queues indexed by MPLS TC priority."
+ ::= { ethernet 21 }
+
+ mPLSTCPriorityTableEntry OBJECT-TYPE
+ SYNTAX MPLSTCPriorityTableEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table MPLSTCPriorityTable"
+ INDEX { mPLSTCPriorityTableIndex }
+ ::= { mPLSTCPriorityTable 1 }
+
+ SNMPTrapTableEntry ::=
+ SEQUENCE { sNMPTrapTableIndex INTEGER
+ , sNMPTrapIPAddress IpAddress
+ , sNMPTrapPortNumber INTEGER
+ , sNMPTrapInternetAddressType INTEGER
+ , sNMPTrapInternetAddress InetAddress
+ , sNMPTrapReceiverEnabled INTEGER
+ }
+
+ sNMPTrapTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SNMPTrapTableEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ " SNMP trap configuration table."
+ ::= { snmpControl 4 }
+
+ sNMPTrapTableEntry OBJECT-TYPE
+ SYNTAX SNMPTrapTableEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table SNMPTrapTable"
+ INDEX { sNMPTrapTableIndex }
+ ::= { sNMPTrapTable 1 }
+
+ SNTPServerTableEntry ::=
+ SEQUENCE { sNTPServerTableIndex INTEGER
+ , sNTPServerIPAddress IpAddress
+ , sNTPServerPortNumber INTEGER
+ , sNTPServerStatus DisplayString
+ , sNTPServerInternetAddressType INTEGER
+ , sNTPServerInternetAddress InetAddress
+ }
+
+ sNTPServerTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SNTPServerTableEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ ""
+ ::= { sntp 15 }
+
+ sNTPServerTableEntry OBJECT-TYPE
+ SYNTAX SNTPServerTableEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table SNTPServerTable"
+ INDEX { sNTPServerTableIndex }
+ ::= { sNTPServerTable 1 }
+
+ UserTableEntry ::=
+ SEQUENCE { userTableIndex INTEGER
+ , userName OCTET STRING
+ , userRole INTEGER
+ , userEnabled INTEGER
+ , userPassword OCTET STRING
+ }
+
+ userTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF UserTableEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ " The User Table Control group contains objects specifically for user account management."
+ ::= { aAAControl 2 }
+
+ userTableEntry OBJECT-TYPE
+ SYNTAX UserTableEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table UserTable"
+ INDEX { userTableIndex }
+ ::= { userTable 1 }
+
+ -- Dfs group attribute definitions
+ --
+ dfsTableNumber OBJECT-TYPE
+ SYNTAX INTEGER (1..63)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of entries in the dfsTable"
+ ::= { dfs 1 }
+
+ -- DfsTable group attribute definitions
+ --
+ dfsTableIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..63)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "used to index values in the dfsTable."
+ ::= { dfsTableEntry 1 }
+
+ dfsMeans OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Snapshot of DFS means"
+ ::= { dfsTableEntry 2 }
+
+ dfsNineNinePointNinePercentiles OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Snapshot of DFS 99.9 percentiles"
+ ::= { dfsTableEntry 3 }
+
+ dfsPeaks OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Snapshot of DFS peaks"
+ ::= { dfsTableEntry 4 }
+
+ -- Bridge group attribute definitions
+ --
+ localPacketFiltering OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "When Local Packet Filtering is Enabled, the bridge
+ learns the source MAC addresses of devices transmitting
+ Ethernet packets on the local Ethernet network, and only
+ bridges packets to the remote unit if the destination MAC
+ address has not been learnt as a 'local' device. When
+ Local Packet Filtering is Disabled then the bridge does
+ not learn the source MAC addresses of devices
+ transmitting Ethernet packets on the local Ethernet
+ network, and bridges ALL Ethernet packets received to the
+ remote unit. Local Packet Filtering should be enabled if
+ no external routing hardware is present"
+ ::= { bridge 1 }
+
+ -- Configuration group attribute definitions
+ --
+ iPv4Address OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Internet protocol (IPv4) address. This address is used
+ by the family of Internet protocols to uniquely identify
+ the unit on a network. NB: A system reboot is required to
+ activate changes to this attribute."
+ ::= { configuration 1 }
+
+ subnetMask OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "A subnet allows the flow of network traffic between
+ hosts to be segregated based on a network configuration.
+ By organizing hosts into logical groups, subnetting can
+ improve network security and performance. NB: A system
+ reboot is required to activate changes to this attribute"
+ ::= { configuration 2 }
+
+ gatewayIPAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The IPv4 address of a computer on the current network
+ that is currently acting as an IPv4 network gateway. A
+ gateway acts as an entrance / exit to packets from / to
+ other networks. NB: A system reboot is required to
+ activate changes to this attribute"
+ ::= { configuration 3 }
+
+ targetMACAddress OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(6))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "MAC address of the PTP wireless unit forming the other
+ end of the PTP link"
+ ::= { configuration 4 }
+
+ masterSlaveMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ master(0),
+ slave(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The PTP wireless link operates using a master and slave
+ relationship"
+ ::= { configuration 5 }
+
+ maximumTransmitPower OBJECT-TYPE
+ SYNTAX INTEGER (-15..27)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Maximum transmit power the wireless unit is permitted to
+ use when establishing and maintaining the wireless link"
+ ::= { configuration 6 }
+
+ antennaGain OBJECT-TYPE
+ SYNTAX INTEGER (0..610)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Antenna Gain. Expressed in 10ths of dBi. NB: This
+ attribute is ignored for variants with an integral
+ antenna."
+ ::= { configuration 7 }
+
+ cableLoss OBJECT-TYPE
+ SYNTAX INTEGER (0..255)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Loss in the cable between the ODU and the antenna.
+ Expressed in 10ths of dB. NB: This attribute is ignored
+ for variants with an integral antenna."
+ ::= { configuration 8 }
+
+ eIRP OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Effective Isotropic Radiated Power (EIRP) describes the
+ strength of the radio signal leaving the wireless unit.
+ Expressed in 10ths of dBm"
+ ::= { configuration 9 }
+
+ ethernetCappedMaxWirelessSpeed OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Ethernet frames will be discarded in the ODU if the data
+ rate over the wireless link exceeds the Ethernet link
+ speed at the local or remote Data port. The Ethernet
+ Capped Max Wireless Speed control limits the wireless
+ data rate based on the local and remote Ethernet link
+ speed. Set this control to Enabled if either ODU is
+ connected to an Ethernet link operating at less than 1000
+ Mbps. NB: This attribute is automatically disabled when
+ the installation agent is armed. To disarm the
+ installation agent use the installation wizard."
+ ::= { configuration 10 }
+
+ channelBandwidth OBJECT-TYPE
+ SYNTAX INTEGER {
+ bw30MHz(0),
+ bw15MHz(1),
+ bw10MHz(2),
+ bw5MHz(3),
+ bw20MHz(4)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This control sets the bandwidth of the transmit and
+ receive radio channels"
+ ::= { configuration 11 }
+
+ remoteIPAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "IP Address of the peer wireless unit"
+ ::= { configuration 12 }
+
+ linkName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..63))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Name of the PTP link allocated by the System
+ Administrator. Used to establish a connection with the
+ correct PTP wireless unit at the other end of the link.
+ NOTE: The link name MUST be the same at both ends of the
+ PTP link."
+ ::= { configuration 14 }
+
+ siteName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..63))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This field contains a user-provided description of the
+ site name together with any additional notes"
+ ::= { configuration 15 }
+
+ accessMethod OBJECT-TYPE
+ SYNTAX INTEGER {
+ linkAccess(0),
+ linkNameAccess(1),
+ groupAccess(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "ODUs must be configured in pairs before a link can be
+ established. The Access Method attribute determines how
+ the paired ODUs will recognise each other. For the Link
+ Access method, each ODU must be configured with Target
+ MAC Address equal to the MAC Address of the other unit.
+ For the Link Name Access method, both units must be
+ configured with the same Link Name. For the Group Access
+ method, both units must be configured with the same Group
+ ID."
+ ::= { configuration 16 }
+
+ groupID OBJECT-TYPE
+ SYNTAX INTEGER (0..255)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "When Access Method is set to Group Access, the Group ID
+ identifies all the units belonging to the same group"
+ ::= { configuration 17 }
+
+ iPv6Address OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..39))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Internet protocol (IPv6) address. This address is used
+ by the family of Internet protocols to uniquely identify
+ the unit on a network. NB: A system reboot is required to
+ activate changes to this attribute."
+ ::= { configuration 18 }
+
+ iPVersion OBJECT-TYPE
+ SYNTAX INTEGER {
+ iPv4(0),
+ iPv6(1),
+ dualIPv4andIPv6(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "IP protocol selection. Choice of IPv4, IPv6 or Dual."
+ ::= { configuration 20 }
+
+ iPv6AutoConfiguredLinkLocalAddress OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..39))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The auto configured link local IPv6 address"
+ ::= { configuration 21 }
+
+ iPv6PrefixLength OBJECT-TYPE
+ SYNTAX INTEGER (0..128)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "IPv6 prefix length"
+ ::= { configuration 22 }
+
+ iPv6GatewayAddress OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..39))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The IPv6 address of a computer on the current network
+ that is currently acting as an IPv6 network gateway. A
+ gateway acts as an entrance / exit to packets from / to
+ other networks. Note that it is usual to use the
+ link-local address of the gateway. NB: A system reboot is
+ required to activate changes to this attribute"
+ ::= { configuration 23 }
+
+ remoteInternetAddressType OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown(0),
+ ipv4(1),
+ ipv6(2),
+ ipv4z(3),
+ ipv6z(4),
+ unknown6(5),
+ unknown7(6),
+ unknown8(7),
+ unknown9(8),
+ unknown10(9),
+ unknown11(10),
+ unknown12(11),
+ unknown13(12),
+ unknown14(13),
+ unknown15(14),
+ unknown16(15),
+ dns(16)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The type of Internet address specified by the associated
+ remoteInternetAddressType."
+ ::= { configuration 24 }
+
+ remoteInternetAddress OBJECT-TYPE
+ SYNTAX InetAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "INET address used to identify the peer wireless unit"
+ ::= { configuration 25 }
+
+ -- Ethernet group attribute definitions
+ --
+ dataPortAutoNegotiation OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This controls whether the local Ethernet interface
+ configuration is automatically negotiated or forced. Do
+ not use a forced setting together with auto negotiation
+ at the Ethernet link partner. If you want to run your
+ Ethernet link at a fixed speed and duplex then you would
+ normally leave auto negotiation enabled and only enable
+ the single Auto Neg Advertisement option that you want
+ the link to run in - FORCING ETHERNET CONFIGURATION IS A
+ LAST RESORT WHICH SHOULD ONLY BE PERFORMED IF YOU ARE
+ HAVING PROBLEMS WITH AUTO NEGOTIATION - AND YOU MUST
+ ENSURE THAT YOU CONFIGURE BOTH THIS UNIT AND THE ETHERNET
+ LINK PARTNER TO WHICH IT IS CONNECTED IDENTICALLY (THE
+ LINK PARTNER MUST NOT HAVE AUTO NEGOTIATION ENABLED
+ EITHER, OTHERWISE A DUPLEX MISMATCH WILL OCCUR). NB: The
+ new setting will only take effect after a system reboot."
+ ::= { ethernet 1 }
+
+ dataPortAutoNegAdvertisement OBJECT-TYPE
+ SYNTAX BITS {
+ negInvalid(2),
+ neg10MbpsHalfDuplex(3),
+ neg10MbpsFullDuplex(4),
+ neg100MbpsHalfDuplex(5),
+ neg100MbpsFullDuplex(6),
+ neg1000MbpsFullDuplex(7)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This sets the different Ethernet configurations that
+ will be advertised during auto negotiation. Note the new
+ setting will only take effect after a system reboot.
+ WARNING: Duplex mismatch may result if both ends of the
+ Ethernet link do not have the same settings. Do not auto
+ negotiation together with a fixed setting at the Ethernet
+ link partner. WARNING: Make sure that you select
+ option(s) that you know your connected equipment can
+ cater for!"
+ ::= { ethernet 2 }
+
+ dataPortAutoMdix OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This enables/disables the Auto MDI/MDIX capability. NB:
+ The new setting will only take effect after a system
+ reboot"
+ ::= { ethernet 3 }
+
+ dataPortStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ down(0),
+ copperLinkUp(1),
+ fiberLinkUp(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current status of the Ethernet link. NB: a change of
+ state may generate an SNMP trap and/or SMTP email alert"
+ ::= { ethernet 4 }
+
+ dataPortSpeedAndDuplex OBJECT-TYPE
+ SYNTAX INTEGER {
+ speed1000MbpsFullDuplex(0),
+ speed100MbpsFullDuplex(1),
+ speed100MbpsHalfDuplex(2),
+ speed10MbpsFullDuplex(3),
+ speed10MbpsHalfDuplex(4),
+ speedUnknown6(5)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The current speed and duplex of the Ethernet link"
+ ::= { ethernet 5 }
+
+ dataPortWirelessDownAlert OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "When enabled, this causes the Ethernet link to be
+ dropped briefly when the wireless link drops. This is so
+ that spanning tree algorithms can quickly detect that
+ there is a problem."
+ ::= { ethernet 6 }
+
+ useVLANForManagementInterfaces OBJECT-TYPE
+ SYNTAX INTEGER {
+ noVLANTagging(0),
+ iEEE8021QTaggedCTagType8100(1),
+ iEEE8021adTaggedSTagorBTagType88a8(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This controls whether the management interfaces
+ (WWW/SNMP/SMTP/SNTP) use VLAN tags or not. NB: The new
+ setting will only take effect after a system reboot"
+ ::= { ethernet 7 }
+
+ vLANManagementPriority OBJECT-TYPE
+ SYNTAX INTEGER {
+ p0(0),
+ p1(1),
+ p2(2),
+ p3(3),
+ p4(4),
+ p5(5),
+ p6(6),
+ p7(7)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This VLAN Priority (0-7) will be included in packets
+ generated by the management interfaces. NB: The new
+ setting will only take effect after a system reboot"
+ ::= { ethernet 8 }
+
+ vLANManagementVID OBJECT-TYPE
+ SYNTAX INTEGER (0..4094)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This VLAN VID (0-4094) will be included in packets
+ generated by the management interfaces. Note the new
+ setting will only take effect after a system reboot"
+ ::= { ethernet 11 }
+
+ managementPortStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ down(0),
+ copperLinkUp(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current status of the out-of-band management link. NB: a
+ change of state may generate an SNMP trap and/or SMTP
+ email alert"
+ ::= { ethernet 12 }
+
+ managementPortSpeedAndDuplex OBJECT-TYPE
+ SYNTAX INTEGER {
+ speed100MbpsFullDuplex(1),
+ speed100MbpsHalfDuplex(2),
+ speed10MbpsFullDuplex(3),
+ speed10MbpsHalfDuplex(4),
+ speedUnknown6(5)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The current speed and duplex of the out-of-band
+ management link"
+ ::= { ethernet 13 }
+
+ ethernetPriorityTableNumber OBJECT-TYPE
+ SYNTAX INTEGER (9)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of entries in the vLANPriorityTable."
+ ::= { ethernet 14 }
+
+ l2CPPriorityTableNumber OBJECT-TYPE
+ SYNTAX INTEGER (5)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of entries in the l2CPPriorityTable."
+ ::= { ethernet 16 }
+
+ iPDSCPPriorityTableNumber OBJECT-TYPE
+ SYNTAX INTEGER (64)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of entries in the iPDSCPPriorityTable."
+ ::= { ethernet 18 }
+
+ mPLSTCPriorityTableNumber OBJECT-TYPE
+ SYNTAX INTEGER (8)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of entries in the mPLSTCPriorityTable."
+ ::= { ethernet 20 }
+
+ managementMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ outofBandLocal(0),
+ outofBand(1),
+ inBand(2),
+ inBandLocal(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Out-of-Band Management (only available on certain
+ hardware models): End-to-end out-of-band mode in which
+ the management agent can be reached from the management
+ port at the local ODU and (assuming that the wireless
+ link is established) the management port at the remote
+ ODU. Out-of-Band Local Management (only available on
+ certain hardware models): Similar to the standard
+ Out-of-Band mode, except that management frames are not
+ forwarded over the wireless link. In-Band Management
+ (default): The management agent can be reached from the
+ data port at the local ODU and (assuming that the
+ wireless link is established) the data port at the remote
+ ODU. In this mode the management port is disabled.
+ In-Band Local Management (only available when 'Use VLAN
+ For Management Interfaces' configures a VLAN tag):
+ Similar to the standard In-Band mode, except that
+ management frames are not forwarded over the wireless
+ link."
+ ::= { ethernet 22 }
+
+ managementPortWirelessDownAlert OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "When enabled, this causes the management link to be
+ dropped briefly when the wireless link drops. This is so
+ that spanning tree algorithms can quickly detect that
+ there is a problem."
+ ::= { ethernet 23 }
+
+ qOSPriorityScheme OBJECT-TYPE
+ SYNTAX INTEGER {
+ ethernet(0),
+ iPMPLS(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Selects classification based on fields in the Ethernet
+ header (Layer 2) or in the Network header (Layer 3). The
+ unit recognises two network layer protocols: IP and MPLS"
+ ::= { ethernet 24 }
+
+ unknownNetworkPriorityQueueMapping OBJECT-TYPE
+ SYNTAX INTEGER {
+ q0(0),
+ q1(1),
+ q2(2),
+ q3(3),
+ q4(4),
+ q5(5),
+ q6(6),
+ q7(7)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Configures the classification of unknown network
+ protocols to an egress queue at the wireless port.
+ Unknown means something other than IP and MPLS"
+ ::= { ethernet 25 }
+
+ dSCPManagementPriority OBJECT-TYPE
+ SYNTAX INTEGER (0..63)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This Differentiated Services Code Point value will be
+ inserted in the IP Header of all IP Datagrams transmitted
+ by the management interfaces"
+ ::= { ethernet 26 }
+
+ ethernetBridgingStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current status of Ethernet packet bridging over the
+ wireless link"
+ ::= { ethernet 27 }
+
+ -- EthernetPriorityTable group attribute definitions
+ --
+ ethernetPriorityTableIndex OBJECT-TYPE
+ SYNTAX INTEGER {
+ p0(1),
+ p1(2),
+ p2(3),
+ p3(4),
+ p4(5),
+ p5(6),
+ p6(7),
+ p7(8),
+ untagged(9)
+ }
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Ethernet priority flag, used to index values in the
+ ethernetPriorityTable"
+ ::= { ethernetPriorityTableEntry 1 }
+
+ ethernetPriorityQueueMapping OBJECT-TYPE
+ SYNTAX INTEGER {
+ q0(0),
+ q1(1),
+ q2(2),
+ q3(3),
+ q4(4),
+ q5(5),
+ q6(6),
+ q7(7)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Configures the classification of this Ethernet priority
+ (also known as IEEE 802.1p value) to an egress queue at
+ the wireless port"
+ ::= { ethernetPriorityTableEntry 2 }
+
+ -- L2CPPriorityTable group attribute definitions
+ --
+ l2CPPriorityTableIndex OBJECT-TYPE
+ SYNTAX INTEGER {
+ bridge(1),
+ mRP(2),
+ cFM(3),
+ rAPS(4),
+ eAPS(5)
+ }
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "L2CP priority flag, used to index values in the
+ l2CPPriorityTable"
+ ::= { l2CPPriorityTableEntry 1 }
+
+ l2CPPriorityQueueMapping OBJECT-TYPE
+ SYNTAX INTEGER {
+ q0(0),
+ q1(1),
+ q2(2),
+ q3(3),
+ q4(4),
+ q5(5),
+ q6(6),
+ q7(7)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Configures the classification of this layer two control
+ protocol (L2CP) to an egress queue at the wireless port"
+ ::= { l2CPPriorityTableEntry 2 }
+
+ -- IPDSCPPriorityTable group attribute definitions
+ --
+ iPDSCPPriorityTableIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..64)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "IP DSCP priority flag, used to index values in the
+ iPDSCPPriorityTable"
+ ::= { iPDSCPPriorityTableEntry 1 }
+
+ iPDSCPPriorityQueueMapping OBJECT-TYPE
+ SYNTAX INTEGER {
+ q0(0),
+ q1(1),
+ q2(2),
+ q3(3),
+ q4(4),
+ q5(5),
+ q6(6),
+ q7(7)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Configures the classification of this IP differentiated
+ services code point (DSCP) value to an egress queue at
+ the wireless port"
+ ::= { iPDSCPPriorityTableEntry 2 }
+
+ -- MPLSTCPriorityTable group attribute definitions
+ --
+ mPLSTCPriorityTableIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..8)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "MPLS TC priority flag, used to index values in the
+ mPLSTCPriorityTable"
+ ::= { mPLSTCPriorityTableEntry 1 }
+
+ mPLSTCPriorityQueueMapping OBJECT-TYPE
+ SYNTAX INTEGER {
+ q0(0),
+ q1(1),
+ q2(2),
+ q3(3),
+ q4(4),
+ q5(5),
+ q6(6),
+ q7(7)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Configures the classification of this MPLS traffic class
+ (the field formerly known as EXP) to an egress queue at
+ the wireless port"
+ ::= { mPLSTCPriorityTableEntry 2 }
+
+ -- Telecom group attribute definitions
+ --
+ telecomsInterface OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0),
+ e1(1),
+ t1(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The line interface type. If this is set to 'None' then
+ the telecoms interfaces are disabled, and the telecom
+ group attributes will be ignored."
+ ::= { telecom 1 }
+
+ telecomsChannelAStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ noSignalLocal(1),
+ noSignalRemote(2),
+ noSignalLocalandRemote(3),
+ up(4),
+ remoteTiming(5),
+ noSignalLocalandRemoteTiming(6)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current status of telecoms channel A. NB: a change of
+ state may generate an SNMP trap and/or SMTP email alert"
+ ::= { telecom 2 }
+
+ telecomsChannelBStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ noSignalLocal(1),
+ noSignalRemote(2),
+ noSignalLocalandRemote(3),
+ up(4),
+ remoteTiming(5),
+ noSignalLocalandRemoteTiming(6)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current status of telecoms channel B. NB: a change of
+ state may generate an SNMP trap and/or SMTP email alert"
+ ::= { telecom 3 }
+
+ channelALineCode OBJECT-TYPE
+ SYNTAX INTEGER {
+ aMI(0),
+ b8ZSHDB3(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The line code setting of the telecoms interface. This
+ must match the setting of the device connected to this
+ interface"
+ ::= { telecom 4 }
+
+ channelBLineCode OBJECT-TYPE
+ SYNTAX INTEGER {
+ aMI(0),
+ b8ZSHDB3(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The line code setting of the telecoms interface. This
+ must match the setting of the device connected to this
+ interface"
+ ::= { telecom 5 }
+
+ channelACableLength OBJECT-TYPE
+ SYNTAX INTEGER {
+ feet133(0),
+ feet266(1),
+ feet399(2),
+ feet533(3),
+ feet655(4)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The length of the cable connected to the telecoms
+ interface, measured in feet"
+ ::= { telecom 6 }
+
+ channelBCableLength OBJECT-TYPE
+ SYNTAX INTEGER {
+ feet133(0),
+ feet266(1),
+ feet399(2),
+ feet533(3),
+ feet655(4)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The length of the cable connected to the telecoms
+ interface, measured in feet"
+ ::= { telecom 7 }
+
+ channelALoopback OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0),
+ copper(1),
+ wireless(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The loopback status of telecoms channel A. This is
+ intended for installation testing and should be set to
+ 'None' for normal operation. The wire connections to a
+ unit can be tested by applying a 'Copper' loopback to the
+ local unit. The wireless connection to the remote unit
+ can be tested by applying a 'Wireless' loopback to the
+ remote unit with no loopback on the local unit. NB: a
+ change of state may generate an SNMP trap and/or SMTP
+ email alert"
+ ::= { telecom 8 }
+
+ channelBLoopback OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0),
+ copper(1),
+ wireless(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The loopback status of telecoms channel B. This is
+ intended for installation testing and should be set to
+ 'None' for normal operation. The wire connections to a
+ unit can be tested by applying a 'Copper' loopback to the
+ local unit. The wireless connection to the remote unit
+ can be tested by applying a 'Wireless' loopback to the
+ remote unit with no loopback on the local unit. NB: a
+ change of state may generate an SNMP trap and/or SMTP
+ email alert"
+ ::= { telecom 9 }
+
+ telecomsChannelSelection OBJECT-TYPE
+ SYNTAX INTEGER {
+ channelAOnly(0),
+ channelsAandB(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates which telecoms channels have been enabled. If
+ only Channel A has been enabled, then the Channel B
+ attributes will be ignored."
+ ::= { telecom 10 }
+
+ -- Licence group attribute definitions
+ --
+ regionCode OBJECT-TYPE
+ SYNTAX INTEGER {
+ regionCodeInvalid(0),
+ regionCode1(1),
+ regionCode2(2),
+ regionCode3(3),
+ regionCode4(4),
+ regionCode5(5),
+ regionCode6(6),
+ regionCode7(7),
+ regionCode8(8),
+ regionCode9(9),
+ regionCode10(10),
+ regionCode11(11),
+ regionCode12(12),
+ regionCode13(13),
+ regionCode14(14),
+ regionCode15(15),
+ regionCode16(16),
+ regionCode17(17),
+ regionCode18(18),
+ regionCode19(19),
+ regionCode20(20),
+ regionCode21(21),
+ regionCode22(22),
+ regionCode23(23),
+ regionCode24(24),
+ regionCode25(25),
+ regionCode26(26),
+ regionCode27(27),
+ regionCode28(28),
+ regionCode29(29),
+ regionCode30(30),
+ regionCode31(31)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The region code prohibits the wireless unit from
+ operating outside the regulated limits. An invalid region
+ code indicates a corrupted license key. NB: a change of
+ state may generate an SNMP trap and/or SMTP email alert"
+ ::= { licence 1 }
+
+ productVariant OBJECT-TYPE
+ SYNTAX INTEGER {
+ pTPxx400Full(0),
+ pTPxx400Deprecated1(1),
+ pTPxx400Deprecated2(2),
+ pTPxx400Lite(3),
+ spare1(4),
+ pTPxx300(5),
+ spare2(6),
+ spare3(7),
+ pTPxx500FullDeprecated(8),
+ pTPxx500LiteDeprecated(9),
+ pTPxx500(10),
+ pTPxx600Lite(11),
+ pTPxx600Full(12),
+ spare5(13),
+ spare6(14),
+ pTP800(15)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The product variant"
+ ::= { licence 2 }
+
+ productName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..63))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Name of the product variant"
+ ::= { licence 3 }
+
+ ethernetFiberSupport OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Ethernet fiber support availability on this wireless
+ unit"
+ ::= { licence 4 }
+
+ frequencyVariant OBJECT-TYPE
+ SYNTAX INTEGER {
+ freq5800MHz(0),
+ freq5400MHz(1),
+ freq4900MHz(2),
+ freq2500MHz(3),
+ freq5800MHz2(4),
+ freq5400MHz2(5),
+ freq4500MHz(6),
+ freq5900MHz(7),
+ freq5200MHz(8),
+ freq5100MHz(9),
+ freq4800MHz(10)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Frequency variant of the wireless unit"
+ ::= { licence 5 }
+
+ bandwidthVariant OBJECT-TYPE
+ SYNTAX INTEGER {
+ bw30MHz(0),
+ bw15MHz(1),
+ bw10MHz(2),
+ bw5MHz(3),
+ bw20MHz(4)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Bandwidth variant of the wireless unit"
+ ::= { licence 6 }
+
+ constantPowerSpectralDensity OBJECT-TYPE
+ SYNTAX INTEGER {
+ constant(0),
+ fullPower(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Constant power spectral density mode control"
+ ::= { licence 7 }
+
+ sNMPv3Enable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "SNMPv3 availability control"
+ ::= { licence 9 }
+
+ hAZLOCConfiguration OBJECT-TYPE
+ SYNTAX INTEGER {
+ nonHAZLOCUnit(0),
+ gasGroupA(1),
+ gasGroupB(2),
+ gasGroupC(3),
+ gasGroupD(4)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The HAZLOC/ATEX Configuration of this unit. The Gas
+ Group is configured by the license key."
+ ::= { licence 10 }
+
+ securityLevel OBJECT-TYPE
+ SYNTAX INTEGER {
+ normal(0),
+ fIPS(1),
+ uCAPL(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The maximum configurable security level"
+ ::= { licence 11 }
+
+ -- Management group attribute definitions
+ --
+ targetRange OBJECT-TYPE
+ SYNTAX INTEGER (0..2000)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Initial target range used in installation +/-1,
+ expressed in tenths of a kilometer. When Auto-Ranging
+ this must be set to 0"
+ ::= { management 1 }
+
+ rangingMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ auto0to40km(0),
+ auto0to100km(1),
+ auto0to200km(2),
+ targetRange(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Type of ranging to use during installation, either
+ Auto-Ranging or use a selectable Target Range"
+ ::= { management 2 }
+
+ installStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ ok(0),
+ wrongPeer(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A non-zero value indicates that signalling was received
+ with the wrong MAC address or a mismatched link name. NB:
+ It is very unusual to detect this, because units with
+ mis-configured Target MAC Address will normally fail to
+ establish a wireless link. However, rare circumstances
+ may establish a partial wireless link and detect this
+ situation. NB: A non-zero value on start-up, or a change
+ of value during operation, may generate an SNMP trap
+ and/or SMTP email alert"
+ ::= { management 3 }
+
+ installArmState OBJECT-TYPE
+ SYNTAX INTEGER {
+ disarmed(0),
+ armed(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates if the unit is being installed. NB: a change
+ of state may generate an SNMP trap and/or SMTP email
+ alert"
+ ::= { management 4 }
+
+ tFTPServerIPAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "IP address of the TFTP Server from which the TFTP
+ Software Upgrade File Name will be retrieved"
+ ::= { management 5 }
+
+ tFTPServerPortNumber OBJECT-TYPE
+ SYNTAX INTEGER (0..65535)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The port number of the TFTP Server from which the TFTP
+ Software Upgrade File Name will be retrieved"
+ ::= { management 6 }
+
+ tFTPSoftwareUpgradeFileName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..127))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Filename of the Software Upgrade to be loaded from the
+ TFTP Server"
+ ::= { management 7 }
+
+ tFTPStartSoftwareUpgrade OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Write '1' to this attribute to start the TFTP software
+ upgrade process. The attribute will be reset to 0 when
+ the upgrade process has finished. Continuing with the
+ software upgrade will cause spectrum management (DSO)
+ channel metrics collection to stop. The wireless unit
+ will no longer search for the optimal operational radio
+ channel. The performance of this wireless link may
+ deterioate over time. If operating in a region where
+ RADAR detection is mandatory you must complete the
+ software upgrade and reboot the unit. Channel metrics
+ collection will only be restarted after the wireless unit
+ has been rebooted"
+ ::= { management 8 }
+
+ tFTPSoftwareUpgradeStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ idle(0),
+ uploadinprogress(1),
+ uploadsuccessfulprogrammingFLASH(2),
+ upgradesuccessfulreboottorunthenewsoftwareimage(3),
+ upgradefailed(4)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The current status of the TFTP Software upgrade process"
+ ::= { management 9 }
+
+ tFTPSoftwareUpgradeStatusText OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..127))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Descriptive text describing the status of the TFTP
+ Software upgrade process, including any error details"
+ ::= { management 10 }
+
+ tFTPSoftwareUpgradeStatusAdditionalText OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..127))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Any additional text describing the status of the TFTP
+ Software upgrade process, including any error details"
+ ::= { management 11 }
+
+ hTTPAccessEnabled OBJECT-TYPE
+ SYNTAX INTEGER {
+ no(0),
+ yes(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This controls whether or not HTTP access is enabled,
+ i.e. if this is disabled (0) then the unit will not
+ respond to any requests on the HTTP port. Remote
+ management via HTTPS is not affected by this setting. Any
+ change in this setting will not take effect until the
+ unit has been rebooted. (Factory default = Enabled)"
+ ::= { management 12 }
+
+ telnetAccessEnabled OBJECT-TYPE
+ SYNTAX INTEGER {
+ no(0),
+ yes(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This controls whether or not Telnet access is enabled,
+ i.e. if this is disabled (0) then the unit will not
+ respond to any requests on the TELNET port. Any change in
+ this setting will not take effect until the unit has been
+ rebooted. (Factory default = Disabled)"
+ ::= { management 13 }
+
+ hTTPPortNumber OBJECT-TYPE
+ SYNTAX INTEGER (0..65535)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This controls the port number for HTTP access. A value
+ of zero will use the default port number. Any change in
+ this setting will not take effect until the unit has been
+ rebooted. (Factory default = 80)"
+ ::= { management 14 }
+
+ hTTPSPortNumber OBJECT-TYPE
+ SYNTAX INTEGER (0..65535)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This controls the port number for HTTPS access. A value
+ of zero will use the default port number. Availability of
+ HTTPS is controlled via the License Key. Any change in
+ this setting will not take effect until the unit has been
+ rebooted. (Factory default = 443)"
+ ::= { management 15 }
+
+ telnetPortNumber OBJECT-TYPE
+ SYNTAX INTEGER (0..65535)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This controls the port number for TELNET access. A value
+ of zero will use the default port number. Any change in
+ this setting will not take effect until the unit has been
+ rebooted. (Factory default = 23)"
+ ::= { management 16 }
+
+ hTTPSAccessEnabled OBJECT-TYPE
+ SYNTAX INTEGER {
+ no(0),
+ yes(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This controls whether or not HTTPS access is enabled,
+ i.e. if this is disabled (0) then the unit will not
+ respond to any requests on the HTTPS port. Remote
+ management via HTTP is not affected by this setting. Any
+ change in this setting will not take effect until the
+ unit has been rebooted. (Factory default = Enabled)"
+ ::= { management 17 }
+
+ tFTPServerInternetAddressType OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown(0),
+ ipv4(1),
+ ipv6(2),
+ ipv4z(3),
+ ipv6z(4),
+ unknown6(5),
+ unknown7(6),
+ unknown8(7),
+ unknown9(8),
+ unknown10(9),
+ unknown11(10),
+ unknown12(11),
+ unknown13(12),
+ unknown14(13),
+ unknown15(14),
+ unknown16(15),
+ dns(16)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The type of Internet address specified by the associated
+ tFTPServerInternetAddress."
+ ::= { management 18 }
+
+ tFTPServerInternetAddress OBJECT-TYPE
+ SYNTAX InetAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "INET address of the TFTP Server from which the TFTP
+ Software Upgrade File Name will be retrieved"
+ ::= { management 19 }
+
+ -- PhyControl group attribute definitions
+ --
+ linkSymmetry OBJECT-TYPE
+ SYNTAX INTEGER {
+ symmetryAdaptive(0),
+ symmetry2to1(1),
+ symmetry1to1(2),
+ symmetry1to2(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Link Symmetry: in fixed symmetric mode the master spends
+ an equal amount of time transmitting and receiving; in
+ fixed asymmetric modes the master transmit and receive
+ times have a fixed ratio; in adaptive mode the transmit
+ and receive periods adjust with applied load."
+ ::= { phyControl 1 }
+
+ linkModeOptimisation OBJECT-TYPE
+ SYNTAX INTEGER {
+ iPTraffic(0),
+ tDMTraffic(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Optimises the wireless link behavior for the type of
+ traffic to be carried. In 'IP Traffic' mode, the wireless
+ link will minimise transmission errors by automatically
+ adapting the modulation mode. In 'TDM Traffic' mode, the
+ wireless link will minimise transmission latency and
+ preserve throughput by maintaining a higher modulation
+ mode in the presence of a limited number of errors. The
+ 'TDM Traffic' mode is recommended for E1/T1 applications
+ and connectionless protocols."
+ ::= { phyControl 2 }
+
+ userConfiguredMaxModulationMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ modBpsk63percent(0),
+ modQpsk63percent(1),
+ modQpsk87percent(2),
+ mod16qam63percent(3),
+ mod16qam87percent(4),
+ mod64qam75percent(5),
+ mod64qam92percent(6),
+ mod256qam81percent(7)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The maximum receive modulation mode controls the MAX
+ mode used for adaptive modulation. NOTE: This attribute
+ is automatically disabled when the installation agent is
+ armed. To disarm the installation agent use the
+ installation wizard"
+ ::= { phyControl 3 }
+
+ remoteMaximumTransmitPower OBJECT-TYPE
+ SYNTAX INTEGER (-15..27)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Maximum transmit power the remote wireless unit is
+ permitted to use when establishing and maintaining the
+ wireless link"
+ ::= { phyControl 4 }
+
+ txColorCode OBJECT-TYPE
+ SYNTAX INTEGER {
+ a(0),
+ b(1),
+ c(2),
+ d(3),
+ e(4)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Transmit Color Code. This attribute need only be
+ considered when the unit is installed in a network of
+ PTP600 units and where some of the units are operating on
+ the same frequency. In this case, the value would
+ normally be derived by a network planner. In all other
+ cases, it is recommended that this attribute is left at
+ the default value. NOTE: For the link to operate, the
+ value of this parameter must in all cases match the value
+ of the Rx Color Code parameter at the far end of the
+ link."
+ ::= { phyControl 5 }
+
+ rxColorCode OBJECT-TYPE
+ SYNTAX INTEGER {
+ a(0),
+ b(1),
+ c(2),
+ d(3),
+ e(4)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Receive Color Code. This attribute need only be
+ considered when the unit is installed in a network of
+ PTP600 units and where some of the units are operating on
+ the same frequency. In this case, the value would
+ normally be derived by a network planner. In all other
+ cases, it is recommended that this attribute is left at
+ the default value. NOTE: For the link to operate, the
+ value of this parameter must in all cases match the value
+ of the Tx Color Code parameter at the far end of the
+ link."
+ ::= { phyControl 6 }
+
+ automaticTxPowerControl OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1),
+ enabledwithinitialestimate(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "When enabled, the transmit power of the local end is
+ automatically adjusted to maintain a configurable target
+ receive signal level at the remote end of the link. When
+ set to Enable with initial estimate, the Slave estimates
+ the optional transmit power before it responds to the
+ Master."
+ ::= { phyControl 8 }
+
+ remoteRxTargetPower OBJECT-TYPE
+ SYNTAX INTEGER (-600..-400)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This is the target receive level for the end of the link
+ which is remote from the end being configured. When
+ Automatic Power Control is enabled, the transmit power of
+ the local end is automatically adjusted in order to
+ maintain the receive signal level at the remote end
+ within a range centered on this value"
+ ::= { phyControl 9 }
+
+ -- PhyStatus group attribute definitions
+ --
+ receivePower OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Receive power expressed in tenths of a dBm"
+ ::= { phyStatus 1 }
+
+ vectorError OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The vector error measurement compares the received
+ signal's IQ modulation characteristics to an ideal signal
+ to determine the composite error vector magnitude. The
+ value represented by this attribute is the average vector
+ error over the previous second expressed in tenths of a
+ dB"
+ ::= { phyStatus 2 }
+
+ transmitPower OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Transmit power expressed in tenths of a dBm"
+ ::= { phyStatus 3 }
+
+ range OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Distance between the two peer wireless units expressed
+ in tenths of a kilometer"
+ ::= { phyStatus 4 }
+
+ linkLoss OBJECT-TYPE
+ SYNTAX INTEGER (-500..500)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The wireless link loss expressed in tenths of a dB"
+ ::= { phyStatus 5 }
+
+ receiveChannel OBJECT-TYPE
+ SYNTAX INTEGER (0..63)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current active receive channel"
+ ::= { phyStatus 6 }
+
+ transmitChannel OBJECT-TYPE
+ SYNTAX INTEGER (0..63)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current active transmit channel"
+ ::= { phyStatus 7 }
+
+ receiveModulationMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ modAcquisition(0),
+ modBpsk63percent(1),
+ modQpsk63percentSingle(2),
+ modTransient1(3),
+ modQpsk87percentSingle(4),
+ modTransient2(5),
+ mod16qam63percentSingleA(6),
+ modTransient3(7),
+ mod16qam87percentSingle(8),
+ modTransient4(9),
+ mod64qam75percentSingle(10),
+ modTransient5(11),
+ mod64qam92percentSingle(12),
+ modTransient6(13),
+ mod256qam81percentSingle(14),
+ mod16qam63percentSingleB(15),
+ mod16qam63percentDual(16),
+ modTransient7(17),
+ mod16qam87percentDual(18),
+ modTransient8(19),
+ mod64qam75percentDual(20),
+ modTransient9(21),
+ mod64qam92percentDual(22),
+ modTransient10(23),
+ mod256qam81percentDual(24)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current active receive modulation mode"
+ ::= { phyStatus 8 }
+
+ transmitModulationMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ modAcquisition(0),
+ modBpsk63percent(1),
+ modQpsk63percentSingle(2),
+ modTransient1(3),
+ modQpsk87percentSingle(4),
+ modTransient2(5),
+ mod16qam63percentSingleA(6),
+ modTransient3(7),
+ mod16qam87percentSingle(8),
+ modTransient4(9),
+ mod64qam75percentSingle(10),
+ modTransient5(11),
+ mod64qam92percentSingle(12),
+ modTransient6(13),
+ mod256qam81percentSingle(14),
+ mod16qam63percentSingleB(15),
+ mod16qam63percentDual(16),
+ modTransient7(17),
+ mod16qam87percentDual(18),
+ modTransient8(19),
+ mod64qam75percentDual(20),
+ modTransient9(21),
+ mod64qam92percentDual(22),
+ modTransient10(23),
+ mod256qam81percentDual(24)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current active transmit modulation mode"
+ ::= { phyStatus 9 }
+
+ receiveFreqMHz OBJECT-TYPE
+ SYNTAX INTEGER (0..5925)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current receive frequency expressed in integer MHz"
+ ::= { phyStatus 11 }
+
+ transmitFreqMHz OBJECT-TYPE
+ SYNTAX INTEGER (0..5925)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current transmit frequency expressed in integer MHz"
+ ::= { phyStatus 12 }
+
+ signalStrengthRatio OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Signal strength ratio (Vertical / Horizontal) : the
+ number of dB larger the Vertical antenna input is than
+ the Horizontal antenna input expressed in tenths of a dB"
+ ::= { phyStatus 13 }
+
+ receiveFreqKHz OBJECT-TYPE
+ SYNTAX INTEGER (0..5925000)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current receive frequency expressed as KHz"
+ ::= { phyStatus 14 }
+
+ transmitFreqKHz OBJECT-TYPE
+ SYNTAX INTEGER (0..5925000)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current transmit frequency expressed as KHz"
+ ::= { phyStatus 15 }
+
+ searchState OBJECT-TYPE
+ SYNTAX INTEGER {
+ registering(0),
+ searching(1),
+ acquiring(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Search status of the wireless modem. 'Registering' means
+ that the modem has locked to an OFDM signal, and the
+ wireless link is up. 'Searching' means that no wireless
+ signal has been detected. 'Acquiring' means that a
+ wireless signal has been detected, but the modem has not
+ locked to an OFDM signal."
+ ::= { phyStatus 16 }
+
+ rawReceivePower OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Raw receive power expressed in tenths of a dBm"
+ ::= { phyStatus 17 }
+
+ -- Alarms group attribute definitions
+ --
+ unitOutOfCalibration OBJECT-TYPE
+ SYNTAX INTEGER {
+ calibrated(0),
+ outOfCalibration(1),
+ outOfCalibrationPAsShutdown(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The unit is out of calibration"
+ ::= { alarms 1 }
+
+ incompatibleRegionCodes OBJECT-TYPE
+ SYNTAX INTEGER {
+ ok(0),
+ incompatibleLicenceKeys(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The master and slave units have incompatible region
+ codes. NB: Both units must have compatible license keys"
+ ::= { alarms 4 }
+
+ noWirelessChannelAvailable OBJECT-TYPE
+ SYNTAX INTEGER {
+ ok(0),
+ noWirelessChannelAvailable(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Spectrum Management was unable to locate a suitable
+ wireless channel to operate on"
+ ::= { alarms 5 }
+
+ wirelessLinkDisabledWarning OBJECT-TYPE
+ SYNTAX INTEGER {
+ ok(0),
+ disabledBySNMPifAdminStatus(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The SNMP ifAdminStatus of the wireless interface has
+ disabled wireless traffic"
+ ::= { alarms 6 }
+
+ dataPortDisabledWarning OBJECT-TYPE
+ SYNTAX INTEGER {
+ ok(0),
+ disabledBySNMPifAdminStatus(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The SNMP ifAdminStatus of the Ethernet interface has
+ disabled Ethernet traffic"
+ ::= { alarms 7 }
+
+ dataPortFiberStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ ok(0),
+ installedFiberNotLicensed(1),
+ fiberLinkNotEstablishedButLOSNotDetected(2),
+ fiberLinkNotEstablishedAndLOSDetected(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "If the fiber link is not OK, there are three possible
+ causes: Either the fiber link has been installed but
+ disabled (because the license key does not include fiber
+ support), the link could not be established even though
+ no LOS was detected (i.e. an optical carrier was
+ detected, which could be due to a broken TX fiber, or
+ because the link is disabled at the fiber link partner),
+ or the link could not be established and LOS is detected
+ (i.e. no optical carrier is detected). NB: a change of
+ status may generate an SNMP trap and/or SMTP email alert"
+ ::= { alarms 8 }
+
+ dataPortConfigurationMismatch OBJECT-TYPE
+ SYNTAX INTEGER {
+ noError(0),
+ mismatchDetected(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The detection of Ethernet fragments (runt packets) when
+ the link is in full duplex is an indication of an
+ auto-negotiation or forced configuration mismatch"
+ ::= { alarms 9 }
+
+ incompatibleMasterAndSlave OBJECT-TYPE
+ SYNTAX INTEGER {
+ ok(0),
+ incompatibleProductVariants(1),
+ differentSoftwareVersionsRunning(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A non-zero value indicates that the master and slave
+ ends of a link are different hardware products, or have
+ different software versions. NB: It is very unusual to
+ detect this, because incompatible units will normally
+ fail to establish a wireless link. However, some
+ combinations may establish a partial wireless link and
+ detect this situation. NB: A non-zero value may generate
+ an SNMP trap and/or SMTP email alert"
+ ::= { alarms 10 }
+
+ tDDSynchronizationStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ locked(0),
+ holdover(1),
+ holdoverNotConnected(2),
+ acquiringLock(3),
+ noTimingReference(4),
+ timingSystemNotConnected(5),
+ initialising(6),
+ clusterTimingMaster(7),
+ tDDSyncNotActive(8)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "An alarm value (displayed in red) indicates that one of
+ the following conditions has not been met (i) An external
+ timing system is connected or internal timing has been
+ configured. (ii) The timing system is providing a useable
+ reference. (iii) The ODU is locked to this reference."
+ ::= { alarms 11 }
+
+ managementPortDisabledWarning OBJECT-TYPE
+ SYNTAX INTEGER {
+ ok(0),
+ disabledBySNMPifAdminStatus(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The SNMP ifAdminStatus of the out-of-band management
+ interface has disabled Ethernet traffic"
+ ::= { alarms 12 }
+
+ tDDSynchronizationAlarm OBJECT-TYPE
+ SYNTAX INTEGER {
+ ok(0),
+ notSynchronized(1),
+ timingSystemFailure(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Not Synchronized indicates failure of the external
+ timing system for a period greater than the holdover
+ timer. TDD frame timing will have drifted, and this link
+ may cause interference with other links in a synchronized
+ network. Timing System Failure is an early warning,
+ indicating that 80% of the holdover period has expired."
+ ::= { alarms 13 }
+
+ linkModeOptimizationMismatch OBJECT-TYPE
+ SYNTAX INTEGER {
+ ok(0),
+ linkModeOptimizationMismatch(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The remote node of this link has been configured with a
+ different link mode optimization"
+ ::= { alarms 14 }
+
+ managementPortConfigurationMismatch OBJECT-TYPE
+ SYNTAX INTEGER {
+ noError(0),
+ mismatchDetected(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The detection of Ethernet fragments (runt packets) when
+ the link is in full duplex is an indication of an
+ auto-negotiation or forced configuration mismatch. This
+ alarm is only raised if an Out-of-Band Management Mode
+ has been configured."
+ ::= { alarms 15 }
+
+ secureModeAlarm OBJECT-TYPE
+ SYNTAX INTEGER {
+ secureModeIsActive(0),
+ secureModeIsNotConfigured(1),
+ secureModeIsConfiguredButNotActive(2),
+ secureModeIsNotSupported(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The secure mode (e.g. FIPS, UC-APL) state of the unit.
+ The secure mode is not configured(1) state indicates that
+ the unit is capable of secure mode operation, and one or
+ more of the following security materials has not been
+ configured: Key Of Keys, Private Key, Public Certificate,
+ DRNG Entropy Status, Wireless Encryption Key. The secure
+ mode mode is configured but not active(2) state indicates
+ that the unit is capable of secure mode operation, and
+ the security material has been configured, but the
+ configuration of interfaces is not consistent with secure
+ mode operation. The secure mode is not supported(3) state
+ indicates that the unit is not capable of secure mode
+ operation. The secure mode capability requires
+ appropriate hardware compatibility, license key and
+ software image."
+ ::= { alarms 16 }
+
+ ethernetBridgingStatusAlarm OBJECT-TYPE
+ SYNTAX INTEGER {
+ ethernetBridgingEnabled(0),
+ ethernetBridgingDisabled(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Ethernet traffic bridging is disabled because the
+ wireless link is not operating at the configured Lowest
+ Ethernet Modulation Mode"
+ ::= { alarms 17 }
+
+ -- Smtp group attribute definitions
+ --
+ sMTPEmailAlert OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Simple Mail Transfer Protocol is used to send equipment
+ alerts via email to a specified email address"
+ ::= { smtp 1 }
+
+ sMTPServerIPAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "IP address of the SMTP server"
+ ::= { smtp 2 }
+
+ sMTPServerPortNumber OBJECT-TYPE
+ SYNTAX INTEGER (0..65535)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Port number of the SMTP server"
+ ::= { smtp 3 }
+
+ sMTPSourceEmailAddress OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..63))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The 'from' email address used when constructing the
+ automatically generated e-mail message"
+ ::= { smtp 4 }
+
+ sMTPDestinationEmailAddress OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..63))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The 'to' email address used when constructing the
+ automatically generated e-mail message"
+ ::= { smtp 5 }
+
+ sMTPEnabledMessages OBJECT-TYPE
+ SYNTAX BITS {
+ telecomsChannelUpDown(1),
+ managementPortUpDown(2),
+ dataPortUpDown(3),
+ enabledDiagnosticAlarms(4),
+ dFSImpulseInterference(5),
+ channelChange(6),
+ wirelessLinkUpDown(7)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This controls which SMTP messages the unit will send"
+ ::= { smtp 6 }
+
+ sMTPServerInternetAddressType OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown(0),
+ ipv4(1),
+ ipv6(2),
+ ipv4z(3),
+ ipv6z(4),
+ unknown6(5),
+ unknown7(6),
+ unknown8(7),
+ unknown9(8),
+ unknown10(9),
+ unknown11(10),
+ unknown12(11),
+ unknown13(12),
+ unknown14(13),
+ unknown15(14),
+ unknown16(15),
+ dns(16)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The type of Internet address specified by the associated
+ sMTPServerInternetAddress."
+ ::= { smtp 7 }
+
+ sMTPServerInternetAddress OBJECT-TYPE
+ SYNTAX InetAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Internet address of the SMTP server"
+ ::= { smtp 8 }
+
+ -- SnmpControl group attribute definitions
+ --
+ sNMPPortNumber OBJECT-TYPE
+ SYNTAX INTEGER (0..65535)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The IP port number used to access the SNMP MIB (i.e.
+ Gets and Sets) (default = 161). NB: A system reboot is
+ required to activate changes to this attribute"
+ ::= { snmpControl 1 }
+
+ sNMPCommunityString OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..63))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The SNMP community string. NB: A system reboot is
+ required to activate changes to this attribute"
+ ::= { snmpControl 2 }
+
+ sNMPTrapTableNumber OBJECT-TYPE
+ SYNTAX INTEGER (2)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of entries in the sNMPTrapTable."
+ ::= { snmpControl 3 }
+
+ sNMPTrapVersion OBJECT-TYPE
+ SYNTAX INTEGER {
+ v1(0),
+ v2c(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The SNMP protocol version to use for SNMP Traps. NB: A
+ system reboot is required to activate changes to this
+ attribute"
+ ::= { snmpControl 5 }
+
+ sNMPEnabledTraps OBJECT-TYPE
+ SYNTAX BITS {
+ managementPortUpDown(0),
+ dataPortUpDown(1),
+ authenticationFailure(2),
+ enabledDiagnosticAlarms(3),
+ dFSImpulseInterference(4),
+ channelChange(5),
+ wirelessLinkUpDown(6),
+ coldStart(7),
+ telecomsChannelUpDown(15)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This controls which SNMP Traps the unit will send"
+ ::= { snmpControl 6 }
+
+ enabledDiagnosticAlarms OBJECT-TYPE
+ SYNTAX BITS {
+ incompatibleMasterAndSlave(0),
+ incompatibleRegionCodes(1),
+ unknown6(2),
+ unknown5(3),
+ unitOutOfCalibration(4),
+ installArmState(5),
+ installStatus(6),
+ regionCode(7),
+ telecomsChannelAStatus(8),
+ dataPortFiberStatus(9),
+ dataPortStatus(10),
+ dataPortDisabledWarning(11),
+ wirelessLinkDisabledWarning(12),
+ sNTPSynchronizationFailed(13),
+ noWirelessChannelAvailable(14),
+ dataPortConfigurationMismatch(15),
+ syslogDisabledWarning(16),
+ linkModeOptimizationMismatch(17),
+ managementPortStatus(18),
+ managementPortDisabledWarning(19),
+ tDDSynchronizationAlarm(20),
+ telecomsChannelBLoopback(21),
+ telecomsChannelALoopback(22),
+ telecomsChannelBStatus(23),
+ ethernetBridgingStatus(26),
+ secureMode(27),
+ syslogClientDisabledWarning(28),
+ managementPortConfigurationMismatch(29),
+ syslogLocalWrapped(30),
+ syslogLocalNearlyFull(31)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Controls which individual diagnostic alarms are enabled.
+ The unit may be configured to generate SNMP traps and/or
+ SMTP email alerts for these enabled alarms by selecting
+ 'Enabled Diagnostic Alarms' on the 'SNMP Enabled Traps'
+ and/or 'SMTP Enabled Messages' attributes"
+ ::= { snmpControl 7 }
+
+ sNMPSendAllTrapsAtStartup OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Controls whether or not all the enabled traps and alarms
+ (including cleared alarms) are reported at start-up."
+ ::= { snmpControl 8 }
+
+ -- SNMPTrapTable group attribute definitions
+ --
+ sNMPTrapTableIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..2)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "SNMP trap value, used to index the SNMPTrapTable."
+ ::= { sNMPTrapTableEntry 1 }
+
+ sNMPTrapIPAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The IP address to which all SNMP Traps are sent. NB: A
+ system reboot is required to activate changes to this
+ attribute."
+ ::= { sNMPTrapTableEntry 2 }
+
+ sNMPTrapPortNumber OBJECT-TYPE
+ SYNTAX INTEGER (0..65535)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Destination port for SNMP Traps (default=162). NB: A
+ system reboot is required to activate changes to this
+ attribute."
+ ::= { sNMPTrapTableEntry 3 }
+
+ sNMPTrapInternetAddressType OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown(0),
+ ipv4(1),
+ ipv6(2),
+ ipv4z(3),
+ ipv6z(4),
+ unknown6(5),
+ unknown7(6),
+ unknown8(7),
+ unknown9(8),
+ unknown10(9),
+ unknown11(10),
+ unknown12(11),
+ unknown13(12),
+ unknown14(13),
+ unknown15(14),
+ unknown16(15),
+ dns(16)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The type of Internet address specified by the associated
+ sNMPTrapInternetAddress."
+ ::= { sNMPTrapTableEntry 4 }
+
+ sNMPTrapInternetAddress OBJECT-TYPE
+ SYNTAX InetAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The Internet address to which all SNMP Traps are sent."
+ ::= { sNMPTrapTableEntry 5 }
+
+ sNMPTrapReceiverEnabled OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "A value of 0 disables the sending of SNMP trap to
+ corresponding receiver. A value of 1 enables the sending
+ of SNMP trap to corresponding receiver."
+ ::= { sNMPTrapTableEntry 6 }
+
+ -- Sntp group attribute definitions
+ --
+ sNTPState OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "SNTP control state"
+ ::= { sntp 1 }
+
+ sNTPPollInterval OBJECT-TYPE
+ SYNTAX INTEGER (60..43200)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The SNTP server polling interval"
+ ::= { sntp 4 }
+
+ sNTPSync OBJECT-TYPE
+ SYNTAX INTEGER {
+ noSync(0),
+ inSync(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "If SNTP Sync fails then check the server settings in the
+ Remote Management page, or disable SNTP"
+ ::= { sntp 5 }
+
+ sNTPLastSync OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Last SNTP sync time"
+ ::= { sntp 6 }
+
+ systemClock OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "System clock presented as local time"
+ ::= { sntp 7 }
+
+ timeZone OBJECT-TYPE
+ SYNTAX INTEGER {
+ gmtMinus1200(0),
+ gmtMinus1130(1),
+ gmtMinus1100(2),
+ gmtMinus1030(3),
+ gmtMinus1000(4),
+ gmtMinus0930(5),
+ gmtMinus0900(6),
+ gmtMinus0830(7),
+ gmtMinus0800(8),
+ gmtMinus0730(9),
+ gmtMinus0700(10),
+ gmtMinus0630(11),
+ gmtMinus0600(12),
+ gmtMinus0530(13),
+ gmtMinus0500(14),
+ gmtMinus0430(15),
+ gmtMinus0400(16),
+ gmtMinus0330(17),
+ gmtMinus0300(18),
+ gmtMinus0230(19),
+ gmtMinus0200(20),
+ gmtMinus0130(21),
+ gmtMinus0100(22),
+ gmtMinus0030(23),
+ gmtZero(24),
+ gmtPlus0030(25),
+ gmtPlus0100(26),
+ gmtPlus0130(27),
+ gmtPlus0200(28),
+ gmtPlus0230(29),
+ gmtPlus0300(30),
+ gmtPlus0330(31),
+ gmtPlus0400(32),
+ gmtPlus0430(33),
+ gmtPlus0500(34),
+ gmtPlus0530(35),
+ gmtPlus0600(36),
+ gmtPlus0630(37),
+ gmtPlus0700(38),
+ gmtPlus0730(39),
+ gmtPlus0800(40),
+ gmtPlus0830(41),
+ gmtPlus0900(42),
+ gmtPlus0930(43),
+ gmtPlus1000(44),
+ gmtPlus1030(45),
+ gmtPlus1100(46),
+ gmtPlus1130(47),
+ gmtPlus1200(48),
+ gmtPlus1230(49),
+ gmtPlus1300(50)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Time zone offsets from Greenwich Mean Time (GMT)"
+ ::= { sntp 8 }
+
+ daylightSaving OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Daylight Saving Time"
+ ::= { sntp 9 }
+
+ sNTPPrimaryServer OBJECT-TYPE
+ SYNTAX INTEGER {
+ server1(0),
+ server2(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Specifies the primary SNTP server, determining the order
+ in which the servers are tried."
+ ::= { sntp 10 }
+
+ sNTPPrimaryServerDeadTime OBJECT-TYPE
+ SYNTAX INTEGER (0..86400)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Time (in seconds) to wait before retrying communications
+ with an unresponsive primary SNTP server. Setting the
+ value to 0 disables the timer."
+ ::= { sntp 11 }
+
+ sNTPServerRetries OBJECT-TYPE
+ SYNTAX INTEGER (0..10)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Number of times the PTP will retry after an SNTP server
+ fails to respond."
+ ::= { sntp 12 }
+
+ sNTPServerTimeout OBJECT-TYPE
+ SYNTAX INTEGER (1..15)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Time (in seconds) the PTP will wait for a response from
+ an SNTP server."
+ ::= { sntp 13 }
+
+ sNTPServerTableNumber OBJECT-TYPE
+ SYNTAX INTEGER (2)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of entries in the SNTPServerTable."
+ ::= { sntp 14 }
+
+ -- SNTPServerTable group attribute definitions
+ --
+ sNTPServerTableIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..2)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Index range for the SNTPServerTable."
+ ::= { sNTPServerTableEntry 1 }
+
+ sNTPServerIPAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The IP address of a valid SNTP server"
+ ::= { sNTPServerTableEntry 2 }
+
+ sNTPServerPortNumber OBJECT-TYPE
+ SYNTAX INTEGER (0..65535)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The IP port number of the SNTP server. Defaults to port
+ 123."
+ ::= { sNTPServerTableEntry 3 }
+
+ sNTPServerStatus OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..127))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Status message reflecting the result of communications
+ with the SNTP server when last polled"
+ ::= { sNTPServerTableEntry 4 }
+
+ sNTPServerInternetAddressType OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown(0),
+ ipv4(1),
+ ipv6(2),
+ ipv4z(3),
+ ipv6z(4),
+ unknown6(5),
+ unknown7(6),
+ unknown8(7),
+ unknown9(8),
+ unknown10(9),
+ unknown11(10),
+ unknown12(11),
+ unknown13(12),
+ unknown14(13),
+ unknown15(14),
+ unknown16(15),
+ dns(16)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The type of Internet address specified by the associated
+ sNTPServerInternetAddress."
+ ::= { sNTPServerTableEntry 5 }
+
+ sNTPServerInternetAddress OBJECT-TYPE
+ SYNTAX InetAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The Internet address of a valid SNTP server"
+ ::= { sNTPServerTableEntry 6 }
+
+ -- Reset group attribute definitions
+ --
+ systemReset OBJECT-TYPE
+ SYNTAX INTEGER {
+ running(0),
+ consoleReboot(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Setting this attribute to '1' will cause a system
+ reboot. NB: a system reboot will apply any pending new
+ settings held in memory"
+ ::= { reset 1 }
+
+ -- Versions group attribute definitions
+ --
+ softwareVersion OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..63))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current software version"
+ ::= { versions 1 }
+
+ hardwareVersion OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..63))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Hardware platform version"
+ ::= { versions 2 }
+
+ secondarySoftwareVersion OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..63))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Secondary software version, used when the primary
+ software image is invalid or erased"
+ ::= { versions 3 }
+
+ bootVersion OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..63))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Boot code software version"
+ ::= { versions 4 }
+
+ -- PubStats group attribute definitions
+ --
+ receiveDataRate OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Average data rate over the last one second interval
+ (kbps)"
+ ::= { pubStats 1 }
+
+ transmitDataRate OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Average data rate over the last one second interval
+ (kbps)"
+ ::= { pubStats 2 }
+
+ aggregateDataRate OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Average data rate over the last one second interval
+ (kbps)"
+ ::= { pubStats 3 }
+
+ wirelessLinkAvailability OBJECT-TYPE
+ SYNTAX INTEGER (0..1000000)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Link availability calculated since the last reset of the
+ system counters, as a percentage multiplied by 10000 to
+ give four decimal places of precision"
+ ::= { pubStats 4 }
+
+ wirelessLinkStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ up(0),
+ registering(1),
+ searching(2),
+ acquiring(3),
+ radarCAC(4),
+ initialising(5)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current status of the wireless link"
+ ::= { pubStats 5 }
+
+ byteErrorRatio OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Reciprocal of the byte error ratio calculated since the
+ last reset of the system counters"
+ ::= { pubStats 6 }
+
+ receiveModulationModeDetail OBJECT-TYPE
+ SYNTAX INTEGER {
+ runningAtMaximumReceiveMode(0),
+ runningAtUserConfiguredMaxModulationMode(1),
+ restrictedBecauseInstallationIsArmed(2),
+ restrictedBecauseOfByteErrorsOnTheWirelessLink(3),
+ restrictedBecauseTheLinkParametersAreUpdating(4),
+ restrictedBecauseChannelChangeIsInProgress(5),
+ restrictedDueToTheLowEthernetLinkSpeed(6),
+ runningAtMaximumReceiveModeForChannelBandwidth(7),
+ limitedByTheWirelessConditions(8)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The reason for the current receive modulation mode"
+ ::= { pubStats 7 }
+
+ ethernetBridgingAvailability OBJECT-TYPE
+ SYNTAX INTEGER (0..1000000)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Link availability bridging Ethernet traffic calculated
+ since the last reset of the system counters, as a
+ percentage multiplied by 10000 to give four decimal
+ places of precision"
+ ::= { pubStats 8 }
+
+ -- Encryption group attribute definitions
+ --
+ encryptionAlgorithm OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0),
+ aESRijndael(1),
+ aES256bitRijndael(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Encryption Algorithm used by the wireless link. NB:
+ A system reboot is required to activate changes to this
+ attribute. NB: The same Encryption Algorithm must be
+ configured at BOTH ends of the link for it to function
+ correctly"
+ ::= { encryption 1 }
+
+ -- TDDControl group attribute definitions
+ --
+ tDDSynchronizationMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "TDD Synchronization Mode selection"
+ ::= { tDDControl 1 }
+
+ -- AAAControl group attribute definitions
+ --
+ userTableNumber OBJECT-TYPE
+ SYNTAX INTEGER (1..10)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of entries in the userTable"
+ ::= { aAAControl 1 }
+
+ -- UserTable group attribute definitions
+ --
+ userTableIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..10)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "used to index values in the userTable."
+ ::= { userTableEntry 1 }
+
+ userName OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "User name which must be entered, along with the
+ appropriate password, in order to gain access to the
+ system."
+ ::= { userTableEntry 2 }
+
+ userRole OBJECT-TYPE
+ SYNTAX INTEGER {
+ readOnly(0),
+ systemAdministrator(1),
+ securityOfficer(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Role of the selected user. A Security Officer has access
+ to and can modify all settings. A System Administrator
+ has access to and can modify all non-security settings. A
+ Read Only user can view settings, but cannot make any
+ changes."
+ ::= { userTableEntry 3 }
+
+ userEnabled OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Enable / Disable the selected user"
+ ::= { userTableEntry 4 }
+
+ userPassword OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "User password, which must be entered in order to gain
+ access to the system."
+ ::= { userTableEntry 5 }
+
+ -- SyslogControl group attribute definitions
+ --
+ syslogClient OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Enable or disable the syslog client"
+ ::= { syslogControl 1 }
+
+ syslogState OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The syslog service has been enabled or disabled"
+ ::= { syslogControl 2 }
+
+ -- Supplementary group attribute definitions
+ --
+ longitude OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..19))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The longitude of the unit, measured in decimal degrees.
+ This object is set by the SNMP manager and has no
+ internal function."
+ ::= { supplementary 1 }
+
+ latitude OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..19))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The latitude of the unit, measured in decimal degrees.
+ This object is set by the SNMP manager and has no
+ internal function."
+ ::= { supplementary 2 }
+
+ altitude OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The altitude of the unit, measured in metres. This
+ object is set by the SNMP manager and has no internal
+ function."
+ ::= { supplementary 3 }
+
+ -- Enterprise NOTIFICATION definitions
+ --
+
+ channelChangeTrap NOTIFICATION-TYPE
+ OBJECTS { receiveChannel }
+ STATUS current
+ DESCRIPTION "The PTP radio has changed wireless channel.
+ This has been caused by either
+ i) mandatory radar avoidance,
+ a DFS impulsive interference event will also be
+ detected,
+ or
+ ii) Dynamic Spectrum Optimization, (DSO)
+ DSO improves link performance by selecting the
+ most appropriate transmit and receive channels
+ with the lowest level of interference."
+ ::= { ptpTrapPrefix 1 }
+
+ dfsImpulsiveInterferenceTrap NOTIFICATION-TYPE
+ OBJECTS { receiveChannel }
+ STATUS current
+ DESCRIPTION "DFS impulsive interference detected event"
+ ::= { ptpTrapPrefix 2 }
+
+ dataPortStatusTrap NOTIFICATION-TYPE
+ OBJECTS { dataPortStatus }
+ STATUS current
+ DESCRIPTION
+ "Current status of the Ethernet link. NB: a change of
+ state may generate an SNMP trap and/or SMTP email alert"
+ ::= { ptpTrapPrefix 3 }
+
+ telecomsChannelAStatusTrap NOTIFICATION-TYPE
+ OBJECTS { telecomsChannelAStatus }
+ STATUS current
+ DESCRIPTION
+ "Current status of telecoms channel A. NB: a change of
+ state may generate an SNMP trap and/or SMTP email alert"
+ ::= { ptpTrapPrefix 4 }
+
+ telecomsChannelBStatusTrap NOTIFICATION-TYPE
+ OBJECTS { telecomsChannelBStatus }
+ STATUS current
+ DESCRIPTION
+ "Current status of telecoms channel B. NB: a change of
+ state may generate an SNMP trap and/or SMTP email alert"
+ ::= { ptpTrapPrefix 5 }
+
+ channelALoopbackTrap NOTIFICATION-TYPE
+ OBJECTS { channelALoopback }
+ STATUS current
+ DESCRIPTION
+ "The loopback status of telecoms channel A. This is
+ intended for installation testing and should be set to
+ 'None' for normal operation. The wire connections to a
+ unit can be tested by applying a 'Copper' loopback to the
+ local unit. The wireless connection to the remote unit
+ can be tested by applying a 'Wireless' loopback to the
+ remote unit with no loopback on the local unit. NB: a
+ change of state may generate an SNMP trap and/or SMTP
+ email alert"
+ ::= { ptpTrapPrefix 6 }
+
+ channelBLoopbackTrap NOTIFICATION-TYPE
+ OBJECTS { channelBLoopback }
+ STATUS current
+ DESCRIPTION
+ "The loopback status of telecoms channel B. This is
+ intended for installation testing and should be set to
+ 'None' for normal operation. The wire connections to a
+ unit can be tested by applying a 'Copper' loopback to the
+ local unit. The wireless connection to the remote unit
+ can be tested by applying a 'Wireless' loopback to the
+ remote unit with no loopback on the local unit. NB: a
+ change of state may generate an SNMP trap and/or SMTP
+ email alert"
+ ::= { ptpTrapPrefix 7 }
+
+ regionCodeTrap NOTIFICATION-TYPE
+ OBJECTS { regionCode }
+ STATUS current
+ DESCRIPTION
+ "The region code prohibits the wireless unit from
+ operating outside the regulated limits. An invalid region
+ code indicates a corrupted license key. NB: a change of
+ state may generate an SNMP trap and/or SMTP email alert"
+ ::= { ptpTrapPrefix 8 }
+
+ installStatusTrap NOTIFICATION-TYPE
+ OBJECTS { installStatus }
+ STATUS current
+ DESCRIPTION
+ "A non-zero value indicates that signalling was received
+ with the wrong MAC address or a mismatched link name. NB:
+ It is very unusual to detect this, because units with
+ mis-configured Target MAC Address will normally fail to
+ establish a wireless link. However, rare circumstances
+ may establish a partial wireless link and detect this
+ situation. NB: A non-zero value on start-up, or a change
+ of value during operation, may generate an SNMP trap
+ and/or SMTP email alert"
+ ::= { ptpTrapPrefix 9 }
+
+ installArmStateTrap NOTIFICATION-TYPE
+ OBJECTS { installArmState }
+ STATUS current
+ DESCRIPTION
+ "Indicates if the unit is being installed. NB: a change
+ of state may generate an SNMP trap and/or SMTP email
+ alert"
+ ::= { ptpTrapPrefix 10 }
+
+ unitOutOfCalibrationTrap NOTIFICATION-TYPE
+ OBJECTS { unitOutOfCalibration }
+ STATUS current
+ DESCRIPTION
+ "The unit is out of calibration"
+ ::= { ptpTrapPrefix 11 }
+
+ incompatibleRegionCodesTrap NOTIFICATION-TYPE
+ OBJECTS { incompatibleRegionCodes }
+ STATUS current
+ DESCRIPTION
+ "The master and slave units have incompatible region
+ codes. NB: Both units must have compatible license keys"
+ ::= { ptpTrapPrefix 14 }
+
+ noWirelessChannelAvailableTrap NOTIFICATION-TYPE
+ OBJECTS { noWirelessChannelAvailable }
+ STATUS current
+ DESCRIPTION
+ "Spectrum Management was unable to locate a suitable
+ wireless channel to operate on"
+ ::= { ptpTrapPrefix 15 }
+
+ wirelessLinkDisabledWarningTrap NOTIFICATION-TYPE
+ OBJECTS { wirelessLinkDisabledWarning }
+ STATUS current
+ DESCRIPTION
+ "The SNMP ifAdminStatus of the wireless interface has
+ disabled wireless traffic"
+ ::= { ptpTrapPrefix 16 }
+
+ dataPortDisabledWarningTrap NOTIFICATION-TYPE
+ OBJECTS { dataPortDisabledWarning }
+ STATUS current
+ DESCRIPTION
+ "The SNMP ifAdminStatus of the Ethernet interface has
+ disabled Ethernet traffic"
+ ::= { ptpTrapPrefix 17 }
+
+ dataPortFiberStatusTrap NOTIFICATION-TYPE
+ OBJECTS { dataPortFiberStatus }
+ STATUS current
+ DESCRIPTION
+ "If the fiber link is not OK, there are three possible
+ causes: Either the fiber link has been installed but
+ disabled (because the license key does not include fiber
+ support), the link could not be established even though
+ no LOS was detected (i.e. an optical carrier was
+ detected, which could be due to a broken TX fiber, or
+ because the link is disabled at the fiber link partner),
+ or the link could not be established and LOS is detected
+ (i.e. no optical carrier is detected). NB: a change of
+ status may generate an SNMP trap and/or SMTP email alert"
+ ::= { ptpTrapPrefix 18 }
+
+ dataPortConfigurationMismatchTrap NOTIFICATION-TYPE
+ OBJECTS { dataPortConfigurationMismatch }
+ STATUS current
+ DESCRIPTION
+ "The detection of Ethernet fragments (runt packets) when
+ the link is in full duplex is an indication of an
+ auto-negotiation or forced configuration mismatch"
+ ::= { ptpTrapPrefix 19 }
+
+ incompatibleMasterAndSlaveTrap NOTIFICATION-TYPE
+ OBJECTS { incompatibleMasterAndSlave }
+ STATUS current
+ DESCRIPTION
+ "A non-zero value indicates that the master and slave
+ ends of a link are different hardware products, or have
+ different software versions. NB: It is very unusual to
+ detect this, because incompatible units will normally
+ fail to establish a wireless link. However, some
+ combinations may establish a partial wireless link and
+ detect this situation. NB: A non-zero value may generate
+ an SNMP trap and/or SMTP email alert"
+ ::= { ptpTrapPrefix 20 }
+
+ sNTPSyncTrap NOTIFICATION-TYPE
+ OBJECTS { sNTPSync }
+ STATUS current
+ DESCRIPTION
+ "If SNTP Sync fails then check the server settings in the
+ Remote Management page, or disable SNTP"
+ ::= { ptpTrapPrefix 21 }
+
+ tDDSynchronizationAlarmTrap NOTIFICATION-TYPE
+ OBJECTS { tDDSynchronizationAlarm }
+ STATUS current
+ DESCRIPTION
+ "Not Synchronized indicates failure of the external
+ timing system for a period greater than the holdover
+ timer. TDD frame timing will have drifted, and this link
+ may cause interference with other links in a synchronized
+ network. Timing System Failure is an early warning,
+ indicating that 80% of the holdover period has expired."
+ ::= { ptpTrapPrefix 22 }
+
+ managementPortStatusTrap NOTIFICATION-TYPE
+ OBJECTS { managementPortStatus }
+ STATUS current
+ DESCRIPTION
+ "Current status of the out-of-band management link. NB: a
+ change of state may generate an SNMP trap and/or SMTP
+ email alert"
+ ::= { ptpTrapPrefix 23 }
+
+ managementPortDisabledWarningTrap NOTIFICATION-TYPE
+ OBJECTS { managementPortDisabledWarning }
+ STATUS current
+ DESCRIPTION
+ "The SNMP ifAdminStatus of the out-of-band management
+ interface has disabled Ethernet traffic"
+ ::= { ptpTrapPrefix 24 }
+
+ linkModeOptimizationMismatchTrap NOTIFICATION-TYPE
+ OBJECTS { linkModeOptimizationMismatch }
+ STATUS current
+ DESCRIPTION
+ "The remote node of this link has been configured with a
+ different link mode optimization"
+ ::= { ptpTrapPrefix 25 }
+
+ managementPortConfigurationMismatchTrap NOTIFICATION-TYPE
+ OBJECTS { managementPortConfigurationMismatch }
+ STATUS current
+ DESCRIPTION
+ "The detection of Ethernet fragments (runt packets) when
+ the link is in full duplex is an indication of an
+ auto-negotiation or forced configuration mismatch. This
+ alarm is only raised if an Out-of-Band Management Mode
+ has been configured."
+ ::= { ptpTrapPrefix 28 }
+
+ syslogStateTrap NOTIFICATION-TYPE
+ OBJECTS { syslogState }
+ STATUS current
+ DESCRIPTION
+ "The syslog service has been enabled or disabled"
+ ::= { ptpTrapPrefix 30 }
+
+ syslogLocalNearlyFullTrap NOTIFICATION-TYPE
+ STATUS current
+ DESCRIPTION "The syslog local log is nearly full (90%)"
+ ::= { ptpTrapPrefix 31 }
+
+ syslogLocalWrappedTrap NOTIFICATION-TYPE
+ STATUS current
+ DESCRIPTION "The syslog local log has wrapped"
+ ::= { ptpTrapPrefix 32 }
+
+ syslogClientTrap NOTIFICATION-TYPE
+ OBJECTS { syslogClient }
+ STATUS current
+ DESCRIPTION
+ "Enable or disable the syslog client"
+ ::= { ptpTrapPrefix 33 }
+
+ secureModeAlarmTrap NOTIFICATION-TYPE
+ OBJECTS { secureModeAlarm }
+ STATUS current
+ DESCRIPTION
+ "The secure mode (e.g. FIPS, UC-APL) state of the unit.
+ The secure mode is not configured(1) state indicates that
+ the unit is capable of secure mode operation, and one or
+ more of the following security materials has not been
+ configured: Key Of Keys, Private Key, Public Certificate,
+ DRNG Entropy Status, Wireless Encryption Key. The secure
+ mode mode is configured but not active(2) state indicates
+ that the unit is capable of secure mode operation, and
+ the security material has been configured, but the
+ configuration of interfaces is not consistent with secure
+ mode operation. The secure mode is not supported(3) state
+ indicates that the unit is not capable of secure mode
+ operation. The secure mode capability requires
+ appropriate hardware compatibility, license key and
+ software image."
+ ::= { ptpTrapPrefix 34 }
+
+ ethernetBridgingStatusAlarmTrap NOTIFICATION-TYPE
+ OBJECTS { ethernetBridgingStatusAlarm }
+ STATUS current
+ DESCRIPTION
+ "Ethernet traffic bridging is disabled because the
+ wireless link is not operating at the configured Lowest
+ Ethernet Modulation Mode"
+ ::= { ptpTrapPrefix 35 }
+
+ END
|