Initial commitHEADmain

1 files changed, 257 insertions, 0 deletions

diff --git a/MIBS/avtech/ROOMALERT4E-MIB b/MIBS/avtech/ROOMALERT4E-MIB
new file mode 100644
index 0000000..bf9d96f
--- /dev/null
+++ b/MIBS/avtech/ROOMALERT4E-MIB
@@ -0,0 +1,257 @@
+--
+--defines ROOMALERT4E-MIB for SNMP agent extension of Room Alert 4E
+--Contents:	Global Registration Module
+--		Room Alert OIDs - Enterprise 20916
+--Version:	4.2.4
+--Date:		15 February 2019
+--Developed By: AVTECH Software, Inc.
+
+--
+--Copyright (c) 2019 AVTECH Software, Inc.
+--
+
+ROOMALERT4E-MIB DEFINITIONS ::= BEGIN
+
+
+IMPORTS
+	enterprises, IpAddress, Counter, TimeTicks
+		FROM RFC1155-SMI
+	OBJECT-TYPE
+		FROM RFC-1212
+	TRAP-TYPE
+		FROM RFC-1215;
+
+
+avtech      OBJECT IDENTIFIER ::= { enterprises 20916 }
+products      OBJECT IDENTIFIER ::= { avtech 1 }
+roomalert4E      OBJECT IDENTIFIER ::= { products 6 }
+sensors       OBJECT IDENTIFIER ::= { roomalert4E 1 }
+signaltower		OBJECT IDENTIFIER ::= { roomalert4E 2 }
+traps	      OBJECT IDENTIFIER ::= { roomalert4E 3 }
+internal   OBJECT IDENTIFIER ::= { sensors 1 }
+temperature   OBJECT IDENTIFIER ::= { internal 1 }
+label	OBJECT IDENTIFIER ::= { internal 2 }
+digital   OBJECT IDENTIFIER ::= { sensors 2 }
+digital-sen1   OBJECT IDENTIFIER ::= { digital 1 }
+digital-sen2   OBJECT IDENTIFIER ::= { digital 2 }
+switch   OBJECT IDENTIFIER ::= { sensors 3 }
+
+
+-- Room Alert 4E MIB
+-- Parameters
+
+
+internal-tempf OBJECT-TYPE
+	SYNTAX  	INTEGER(0..65535)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION	"The internal temperature reading in Fahrenheit."
+::= { temperature 1 }
+
+internal-tempc OBJECT-TYPE
+	SYNTAX  	INTEGER(0..65535)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION	"The internal temperature reading in Celsius."
+::= { temperature 2 }
+
+internal-label OBJECT-TYPE
+	SYNTAX		OCTET STRING
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION "The label of this sensor"
+::= { label 1 }
+
+digital-sen1-1 OBJECT-TYPE
+	SYNTAX  	INTEGER(0..65535)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION	"If this sensor is a Temperature, Temp/Humidity, Temp/Analog, or Temp/Active Power sensor, this value represents the current temperature in Celsius."
+::= { digital-sen1 1 }
+
+digital-sen1-2 OBJECT-TYPE
+	SYNTAX  	INTEGER(0..65535)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION	"If this sensor is a Temperature, Temp/Humidity, Temp/Analog, or Temp/Active Power sensor, this value represents the current temperature in Fahrenheit."
+::= { digital-sen1 2 }
+
+digital-sen1-3 OBJECT-TYPE
+	SYNTAX  	INTEGER(0..65535)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog sensor, this value represents the current Voltage reading. If this is a Temp/Active Power sensor, this value represents the current power state (1=Power Detected, 0=No Power Detected)."
+::= { digital-sen1 3 }
+
+digital-sen1-4 OBJECT-TYPE
+	SYNTAX  	INTEGER(0..65535)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current custom reading."
+::= { digital-sen1 4 }
+
+digital-sen1-5 OBJECT-TYPE
+	SYNTAX  	INTEGER(0..65535)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
+::= { digital-sen1 5 }
+
+digital-sen1-6 OBJECT-TYPE
+	SYNTAX  	INTEGER(0..65535)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current dew point in Celsius."
+::= { digital-sen1 6 }
+
+digital-sen1-7 OBJECT-TYPE
+	SYNTAX  	INTEGER(0..65535)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current dew point in Fahrenheit."
+::= { digital-sen1 7 }
+
+digital-sen1-label OBJECT-TYPE
+	SYNTAX		OCTET STRING
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION "The label of this sensor"
+::= {digital-sen1 8}
+
+digital-sen2-1 OBJECT-TYPE
+	SYNTAX  	INTEGER(0..65535)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION	"If this sensor is a Temperature, Temp/Humidity, Temp/Analog, or Temp/Active Power sensor, this value represents the current temperature in Celsius."
+::= { digital-sen2 1 }
+
+digital-sen2-2 OBJECT-TYPE
+	SYNTAX  	INTEGER(0..65535)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION	"If this sensor is a Temperature, Temp/Humidity, Temp/Analog, or Temp/Active Power sensor, this value represents the current temperature in Fahrenheit."
+::= { digital-sen2 2 }
+
+digital-sen2-3 OBJECT-TYPE
+	SYNTAX  	INTEGER(0..65535)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog sensor, this value represents the current Voltage reading. If this is a Temp/Active Power sensor, this value represents the current power state (1=Power Detected, 0=No Power Detected)."
+::= { digital-sen2 3 }
+
+digital-sen2-4 OBJECT-TYPE
+	SYNTAX  	INTEGER(0..65535)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current custom reading."
+::= { digital-sen2 4 }
+
+digital-sen2-5 OBJECT-TYPE
+	SYNTAX  	INTEGER(0..65535)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
+::= { digital-sen2 5 }
+
+digital-sen2-6 OBJECT-TYPE
+	SYNTAX  	INTEGER(0..65535)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current dew point in Celsius."
+::= { digital-sen2 6 }
+
+digital-sen2-7 OBJECT-TYPE
+	SYNTAX  	INTEGER(0..65535)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current dew point in Fahrenheit."
+::= { digital-sen2 7 }
+
+digital-sen2-label OBJECT-TYPE
+	SYNTAX		OCTET STRING
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION "The label of this sensor"
+::= {digital-sen2 8}
+
+switch-sen1 OBJECT-TYPE
+	SYNTAX  	INTEGER(0..1)
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION	"The reading for the switch sensor 1 (0 = OPEN, 1 = CLOSED)."
+::= { switch 1 }
+
+switch-label OBJECT-TYPE
+	SYNTAX		OCTET STRING
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION "The label for the switch sensor"
+::= { switch 2 }
+
+red-led OBJECT-TYPE
+	SYNTAX  	INTEGER(0..1)
+	ACCESS		read-write
+	STATUS		mandatory
+	DESCRIPTION	"The status of this Light Tower element (0 = OFF, 1 = ON)."
+::= { signaltower 1 }
+
+amber-led OBJECT-TYPE
+	SYNTAX  	INTEGER(0..1)
+	ACCESS		read-write
+	STATUS		mandatory
+	DESCRIPTION	"The status of this Light Tower element (0 = OFF, 1 = ON)."
+::= { signaltower 2 }
+
+green-led OBJECT-TYPE
+	SYNTAX  	INTEGER(0..1)
+	ACCESS		read-write
+	STATUS		mandatory
+	DESCRIPTION	"The status of this Light Tower element (0 = OFF, 1 = ON)."
+::= { signaltower 3 }
+
+blue-led OBJECT-TYPE
+	SYNTAX  	INTEGER(0..1)
+	ACCESS		read-write
+	STATUS		mandatory
+	DESCRIPTION	"The status of this Light Tower element (0 = OFF, 1 = ON)."
+::= { signaltower 4 }
+
+white-led OBJECT-TYPE
+	SYNTAX  	INTEGER(0..1)
+	ACCESS		read-write
+	STATUS		mandatory
+	DESCRIPTION	"The status of this Light Tower element (0 = OFF, 1 = ON)."
+::= { signaltower 5 }
+
+alarm1 OBJECT-TYPE
+	SYNTAX  	INTEGER(0..1)
+	ACCESS		read-write
+	STATUS		mandatory
+	DESCRIPTION	"The status of this Light Tower element (0 = OFF, 1 = ON)."
+::= { signaltower 6 }
+
+alarm2 OBJECT-TYPE
+	SYNTAX  	INTEGER(0..1)
+	ACCESS		read-write
+	STATUS		mandatory
+	DESCRIPTION	"The status of this Light Tower element (0 = OFF, 1 = ON)."
+::= { signaltower 7 }
+
+alarmmessage OBJECT-TYPE
+	SYNTAX  	OCTET STRING
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION	"Last Alarm Message"
+::= { traps 1 }
+
+
+-- roomalert4E TRAPS
+
+room-alert-4e-snmp-trap TRAP-TYPE
+	ENTERPRISE	roomalert4E
+	VARIABLES	{ alarmmessage }
+	DESCRIPTION	"A room-alert-4e-snmp-trap indicates that an alarm
+			condition has occurred on the sensor indicated
+			by the alarmmessage variable."
+::= 2
+END