diff options
| author | David Leutgeb <david.leutgeb@mannundmouse.com> | 2023-12-05 12:25:34 +0100 |
|---|---|---|
| committer | David Leutgeb <david.leutgeb@mannundmouse.com> | 2023-12-05 12:25:34 +0100 |
| commit | 98a672123c7872f6b9b75a9a2b6bb3aea504de6a (patch) | |
| tree | 9b13bd7f563c3198047bd359195327cf28b3caf0 /MIBS/arubaos/WLSX-WLAN-MIB | |
| download | mibs-98a672123c7872f6b9b75a9a2b6bb3aea504de6a.tar.gz mibs-98a672123c7872f6b9b75a9a2b6bb3aea504de6a.zip | |
Diffstat (limited to 'MIBS/arubaos/WLSX-WLAN-MIB')
| -rw-r--r-- | MIBS/arubaos/WLSX-WLAN-MIB | 6231 |
1 files changed, 6231 insertions, 0 deletions
diff --git a/MIBS/arubaos/WLSX-WLAN-MIB b/MIBS/arubaos/WLSX-WLAN-MIB new file mode 100644 index 0000000..cb083df --- /dev/null +++ b/MIBS/arubaos/WLSX-WLAN-MIB @@ -0,0 +1,6231 @@ +--- ArubaOS 8.8.0.1_80393 +-- vim:set ts=4 sw=4: +WLSX-WLAN-MIB DEFINITIONS ::= BEGIN + + IMPORTS + TEXTUAL-CONVENTION FROM SNMPv2-TC + + MODULE-IDENTITY, + OBJECT-TYPE, + snmpModules, + Integer32, + Unsigned32, + Counter32, + IpAddress, + NOTIFICATION-TYPE + FROM SNMPv2-SMI + + TDomain, + DisplayString, + PhysAddress, + TAddress, + TimeInterval, + RowStatus, + StorageType, + TestAndIncr, + MacAddress, + TruthValue + FROM SNMPv2-TC + + ifIndex + FROM RFC1213-MIB + + ArubaEnableValue, + ArubaFrameType, + ArubaActiveState, + ArubaRogueApType, + ArubaAuthenticationMethods, + ArubaEncryptionMethods, + ArubaPhyType, + ArubaVoipProtocolType, + ArubaVlanValidRange, + ArubaAccessPointMode, + ArubaAPStatus, + ArubaEnet1Mode, + ArubaUnprovisionedStatus, + ArubaMonitorMode, + ArubaAntennaSetting, + ArubaMeshRole, + ArubaHTMode, + ArubaPortSpeed, + ArubaHTExtChannel + FROM ARUBA-TC + + OBJECT-GROUP + FROM SNMPv2-CONF + wlsxEnterpriseMibModules + FROM ARUBA-MIB; + + wlsxWlanMIB MODULE-IDENTITY + LAST-UPDATED "202008141745Z" + ORGANIZATION "Aruba, a Hewlett Packard Enterprise company" + CONTACT-INFO + "Postal: 3333 Scott Blvd, + Santa Clara, CA 95054 + E-mail: aruba-ext-eng-reg@hpe.com + Phone: 408 227 4500 + Fax: 408 752 0626" + DESCRIPTION + "This MIB module defines MIB objects which provide + information about the Wireless Management System (WMS) in the + Aruba Controller." + REVISION "202008141745Z" + DESCRIPTION + "The initial revision." + ::= { wlsxEnterpriseMibModules 5 } + + wlsxWlanConfigGroup OBJECT IDENTIFIER ::= { wlsxWlanMIB 1 } + wlsxWlanStateGroup OBJECT IDENTIFIER ::= { wlsxWlanMIB 2 } + wlsxWlanStatsGroup OBJECT IDENTIFIER ::= { wlsxWlanMIB 3 } + wlsxRAPTraps OBJECT IDENTIFIER ::= { wlsxWlanMIB 100 } + +-- wlsxWlanAccessPointInfoGroup contains a Local Access Point Information Table. +-- which lists all the APs connected to the controller, a Global AP Info Table +-- which lists all the APs in the Aruba Domain. The Global table is valid only +-- on the Master controller. The Group also contains two scalar objects which +-- indicate the total number of APs and the total number of Clients connected. + + wlsxWlanAccessPointInfoGroup OBJECT IDENTIFIER ::= { wlsxWlanStateGroup 1 } + wlsxWlanStationInfoGroup OBJECT IDENTIFIER ::= { wlsxWlanStateGroup 2 } + wlsxWlanAssociationInfoGroup OBJECT IDENTIFIER ::= { wlsxWlanStateGroup 3 } + wlsxWlanAccessPointStatsGroup OBJECT IDENTIFIER ::= { wlsxWlanStatsGroup 1 } + wlsxWlanStationStatsGroup OBJECT IDENTIFIER ::= { wlsxWlanStatsGroup 2 } + wlsxWlanSwitchStatsGroup OBJECT IDENTIFIER ::= { wlsxWlanStatsGroup 3 } + wlsxSSIDConfigGroup OBJECT IDENTIFIER ::= { wlsxWlanConfigGroup 1 } + wlsxAPConfigGroup OBJECT IDENTIFIER ::= { wlsxWlanConfigGroup 2 } + + wlsxWlanTotalNumAccessPoints OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Total Number of Access Points connected to the controller. + " + ::= { wlsxWlanAccessPointInfoGroup 1 } + + wlsxWlanTotalNumStationsAssociated OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Total Number of Stations Associated to the controller. + " + ::= { wlsxWlanAccessPointInfoGroup 2 } + +-- AP Group Table + wlsxWlanAPGroupTable OBJECT-TYPE + SYNTAX SEQUENCE OF WlanAPGroupEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " + This Table lists all the Access Points Groups configured in the + Aruba controller. + " + ::= { wlsxWlanAccessPointInfoGroup 3 } + + wlsxWlanAPGroupEntry OBJECT-TYPE + SYNTAX WlanAPGroupEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "AP Group Entry" + INDEX {wlanAPGroup} + ::= { wlsxWlanAPGroupTable 1 } + + WlanAPGroupEntry ::= + SEQUENCE { + wlanAPGroup DisplayString, + wlanAPNumAps Integer32 + } + + wlanAPGroup OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " + The name of an AP group + " + ::= { wlsxWlanAPGroupEntry 1 } + + wlanAPNumAps OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The number of APs in the AP Group + " + ::= { wlsxWlanAPGroupEntry 2 } + + + -- AP Table + + wlsxWlanAPTable OBJECT-TYPE + SYNTAX SEQUENCE OF WlanAPEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " + This table lists all the Access Points connected to the + controller. + " + ::= { wlsxWlanAccessPointInfoGroup 4 } + + wlsxWlanAPEntry OBJECT-TYPE + SYNTAX WlanAPEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Access Point Entry" + INDEX {wlanAPMacAddress} + ::= { wlsxWlanAPTable 1 } + + WlanAPEntry ::= + SEQUENCE { + wlanAPMacAddress MacAddress, + wlanAPIpAddress IpAddress, + wlanAPName DisplayString, + wlanAPGroupName DisplayString, + wlanAPModel OBJECT IDENTIFIER, + wlanAPSerialNumber DisplayString, + wlanAPdot11aAntennaGain Integer32, + wlanAPdot11gAntennaGain Integer32, + wlanAPNumRadios Integer32, + wlanAPEnet1Mode ArubaEnet1Mode, + wlanAPIpsecMode ArubaEnableValue, + wlanAPUpTime TimeTicks, + wlanAPModelName DisplayString, + wlanAPLocation DisplayString, + wlanAPBuilding Integer32, + wlanAPFloor Integer32, + wlanAPLoc Integer32, + wlanAPExternalAntenna ArubaAntennaSetting, + wlanAPStatus ArubaAPStatus, + wlanAPNumBootstraps Integer32, + wlanAPNumReboots Integer32, + wlanAPUnprovisioned ArubaUnprovisionedStatus, + wlanAPMonitorMode ArubaMonitorMode, + wlanAPFQLNBuilding DisplayString, + wlanAPFQLNFloor DisplayString, + wlanAPFQLN DisplayString, + wlanAPFQLNCampus DisplayString, + wlanAPLongitude DisplayString, + wlanAPLatitude DisplayString, + wlanAPAltitude DisplayString, + wlanAPMeshRole ArubaMeshRole, + wlanAPSysLocation DisplayString, + wlanAPHwVersion DisplayString, + wlanAPSwVersion DisplayString, + wlanAPNumWarmReboots Integer32, + wlanAPOuterIpAddress IpAddress, + wlanAPRemoteLanIpAddress IpAddress, + wlanAPActiveUplink INTEGER, + wlanAPSwitchIpAddress IpAddress, + wlanAPStandbyIpAddress IpAddress, + wlanAPConnectedAsStandby INTEGER, + wlanAPServiceTag DisplayString, + wlanAPConnectedAsDatazone INTEGER, + wlanAPIpv6Address DisplayString(SIZE(0..45)), + wlanAPFlexRadioMode ArubaFlexRadioMode, + wlanAPdot11aAntennaGain10x Integer32, + wlanAPdot11gAntennaGain10x Integer32, + wlanAPDual5GMode ArubaEnableValue, + wlanAPActiveIpAddress DisplayString(SIZE(0..45)), + wlanAPSplit5GMode ArubaSplit5GMode + } + + wlanAPMacAddress OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " + Ethernet MAC Address of the Access Point + " + ::= { wlsxWlanAPEntry 1 } + + wlanAPIpAddress OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + IP Address of the Access Point + " + ::= { wlsxWlanAPEntry 2 } + + wlanAPName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + " + Host name of the Access Point. + " + ::= { wlsxWlanAPEntry 3 } + + wlanAPGroupName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + " + Group Name of the Access Point. + " + ::= { wlsxWlanAPEntry 4 } + + wlanAPModel OBJECT-TYPE + SYNTAX OBJECT IDENTIFIER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Sys OID of the Access Point. + " + ::= { wlsxWlanAPEntry 5 } + + wlanAPSerialNumber OBJECT-TYPE + SYNTAX DisplayString(SIZE(0..32)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Serial Number of the Access Point. + " + ::= { wlsxWlanAPEntry 6 } + + wlanAPdot11aAntennaGain OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Configured antenna gain for 'A' Radio. + " + ::= { wlsxWlanAPEntry 7 } + + wlanAPdot11gAntennaGain OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Configured antenna gain for 'G' Radio. + " + ::= { wlsxWlanAPEntry 8 } + + wlanAPNumRadios OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Number of Radios in the Access Point. + " + ::= { wlsxWlanAPEntry 9 } + + wlanAPEnet1Mode OBJECT-TYPE + SYNTAX ArubaEnet1Mode + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Enet1 Mode of the Access Point. + " + ::= { wlsxWlanAPEntry 10 } + + wlanAPIpsecMode OBJECT-TYPE + SYNTAX ArubaEnableValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + IPSEC Mode of the Access Point. + " + ::= { wlsxWlanAPEntry 11 } + + wlanAPUpTime OBJECT-TYPE + SYNTAX TimeTicks + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Time (in hundredths of seconds) since the last time the Access + Point bootstrapped with the controller. + " + ::= { wlsxWlanAPEntry 12 } + + wlanAPModelName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Model name of the Access Point. + " + ::= { wlsxWlanAPEntry 13 } + + wlanAPLocation OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Location of the Access Point. + " + ::= { wlsxWlanAPEntry 14 } + + wlanAPBuilding OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + AP Building Number. + " + ::= { wlsxWlanAPEntry 15 } + + wlanAPFloor OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + AP Floor Number. + " + ::= { wlsxWlanAPEntry 16 } + + wlanAPLoc OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + AP Location. + " + ::= { wlsxWlanAPEntry 17 } + + wlanAPExternalAntenna OBJECT-TYPE + SYNTAX ArubaAntennaSetting + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + AP Antenna Status. + " + ::= { wlsxWlanAPEntry 18 } + + wlanAPStatus OBJECT-TYPE + SYNTAX ArubaAPStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + AP Status. + " + ::= { wlsxWlanAPEntry 19 } + + wlanAPNumBootstraps OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Number of times the AP has bootstrapped with the controller. + " + ::= { wlsxWlanAPEntry 20 } + + wlanAPNumReboots OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Number of times the AP has rebooted. + " + ::= { wlsxWlanAPEntry 21 } + + wlanAPUnprovisioned OBJECT-TYPE + SYNTAX ArubaUnprovisionedStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Indicates whether the AP is unprovisioned due to lack of + antenna gain or location code settings. + " + ::= { wlsxWlanAPEntry 22 } + + wlanAPMonitorMode OBJECT-TYPE + SYNTAX ArubaMonitorMode + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Indicates whether any radio on this AP is acting as an + air monitor. + " + ::= { wlsxWlanAPEntry 23 } + + wlanAPFQLNBuilding OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The building component of the AP's FQLN. + " + ::= { wlsxWlanAPEntry 24 } + + wlanAPFQLNFloor OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The floor component of the AP's FQLN. + " + ::= { wlsxWlanAPEntry 25 } + + wlanAPFQLN OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + " + The AP's Fully Qualified Location Name (FQLN). + " + ::= { wlsxWlanAPEntry 26 } + + wlanAPFQLNCampus OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The campus component of the AP's FQLN. + " + ::= { wlsxWlanAPEntry 27 } + + wlanAPLongitude OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + " + Longitude of the AP. Signed floating-point value. + " + ::= { wlsxWlanAPEntry 28 } + + wlanAPLatitude OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + " + Latitude of the AP. Signed floating-point value. + " + ::= { wlsxWlanAPEntry 29 } + + wlanAPAltitude OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + " + Altitude of the AP. Signed floating-point value. + " + ::= { wlsxWlanAPEntry 30 } + + wlanAPMeshRole OBJECT-TYPE + SYNTAX ArubaMeshRole + MAX-ACCESS read-write + STATUS current + DESCRIPTION + " + AP Mesh role + " + ::= { wlsxWlanAPEntry 31 } + + wlanAPSysLocation OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + AP sysLocation + " + ::= { wlsxWlanAPEntry 32 } + + wlanAPHwVersion OBJECT-TYPE + SYNTAX DisplayString (SIZE(1..64)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Hardware version of the AP. + " + ::= { wlsxWlanAPEntry 33 } + + wlanAPSwVersion OBJECT-TYPE + SYNTAX DisplayString (SIZE(1..64)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Software version of the AP. + " + ::= { wlsxWlanAPEntry 34 } + + wlanAPNumWarmReboots OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Number of times the AP has warm-rebooted. + " + ::= { wlsxWlanAPEntry 35 } + + wlanAPOuterIpAddress OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Outer IP Address of the Access Point. + " + ::= { wlsxWlanAPEntry 36 } + + wlanAPRemoteLanIpAddress OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + LAN IP Address of the Remote Access Point. + " + ::= { wlsxWlanAPEntry 37 } + + wlanAPActiveUplink OBJECT-TYPE + SYNTAX INTEGER { + ethernet(1), + usb(2), + pppoe(3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Uplink of the RAP(Ethernet or USB). + " + ::= { wlsxWlanAPEntry 38 } + + wlanAPSwitchIpAddress OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Access points' Serving Controller's IP Address. + " + ::= { wlsxWlanAPEntry 39 } + + wlanAPStandbyIpAddress OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Access points' Standby Controller's IP Address. + " + ::= { wlsxWlanAPEntry 40 } + + wlanAPConnectedAsStandby OBJECT-TYPE + SYNTAX INTEGER { + active(0), + standby(1) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Access point connected as active/standby. + " + ::= { wlsxWlanAPEntry 41 } + + wlanAPServiceTag OBJECT-TYPE + SYNTAX DisplayString (SIZE(1..64)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Access point service tag. + " + ::= { wlsxWlanAPEntry 42 } + + wlanAPConnectedAsDatazone OBJECT-TYPE + SYNTAX INTEGER(0..4) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This object indicate this AP comes from datazone(1-4) or primary zone(0) + " + ::= { wlsxWlanAPEntry 43 } + + wlanAPIpv6Address OBJECT-TYPE + SYNTAX DisplayString(SIZE(0..45)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + IPv6 Address of the Access Point + " + ::= { wlsxWlanAPEntry 44 } + + wlanAPFlexRadioMode OBJECT-TYPE + SYNTAX ArubaFlexRadioMode + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Flex Radio Operating Mode + " + ::= { wlsxWlanAPEntry 45 } + wlanAPdot11aAntennaGain10x OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Configured antenna gain for 'A' Radio (antennaGain*10) + " + ::= { wlsxWlanAPEntry 46 } + + wlanAPdot11gAntennaGain10x OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Configured antenna gain for 'G' Radio (antennaGain*10) + " + ::= { wlsxWlanAPEntry 47 } + + wlanAPDual5GMode OBJECT-TYPE + SYNTAX ArubaDual5GMode + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Dual5GHz Operating Mode + " + ::= { wlsxWlanAPEntry 48 } + + wlanAPActiveIpAddress OBJECT-TYPE + SYNTAX DisplayString(SIZE(0..45)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + IPv4 or IPv6 Address of the Access Point + " + ::= { wlsxWlanAPEntry 49 } + + wlanAPSplit5GMode OBJECT-TYPE + SYNTAX ArubaSplit5GMode + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Split 5GHz Operating Mode + " + ::= { wlsxWlanAPEntry 50 } + + +-- Radio table is indexed by the Mac Address of the AP and the type of the +-- radio. + + wlsxWlanRadioTable OBJECT-TYPE + SYNTAX SEQUENCE OF WlanRadioEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " + This table lists all the radios known to the + controller. + " + ::= { wlsxWlanAccessPointInfoGroup 5 } + + wlsxWlanRadioEntry OBJECT-TYPE + SYNTAX WlanRadioEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "AP Radio Entry" + INDEX {wlanAPMacAddress, wlanAPRadioNumber} + ::= { wlsxWlanRadioTable 1 } + + WlanRadioEntry ::= + SEQUENCE { + wlanAPRadioNumber Integer32, + wlanAPRadioType ArubaPhyType, + wlanAPRadioChannel Integer32, + wlanAPRadioTransmitPower Integer32, + wlanAPRadioMode ArubaAccessPointMode, + wlanAPRadioUtilization Integer32, + wlanAPRadioNumAssociatedClients Integer32, + wlanAPRadioNumMonitoredClients Integer32, + wlanAPRadioNumActiveBSSIDs Integer32, + wlanAPRadioNumMonitoredBSSIDs Integer32, + wlanAPRadioBearing DisplayString, + wlanAPRadioTiltAngle DisplayString, + wlanAPRadioHTMode ArubaHTMode, + wlanAPRadioHTExtChannel ArubaHTExtChannel, + wlanAPRadioHTChannel DisplayString, + wlanAPRadioAPName DisplayString, + wlanAPRadioTransmitPower10x Integer32 + } + + wlanAPRadioNumber OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " + The radio number + " + ::= { wlsxWlanRadioEntry 1 } + + wlanAPRadioType OBJECT-TYPE + SYNTAX ArubaPhyType + MAX-ACCESS read-write + STATUS current + DESCRIPTION + " + Type of the Radio + " + ::= { wlsxWlanRadioEntry 2 } + + wlanAPRadioChannel OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The channel the radio is currently operating on. + " + ::= { wlsxWlanRadioEntry 3 } + + wlanAPRadioTransmitPower OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The current power level of the radio. (Transmitted as txpwr*2) + " + ::= { wlsxWlanRadioEntry 4 } + + wlanAPRadioMode OBJECT-TYPE + SYNTAX ArubaAccessPointMode + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The Mode in which the radio is operating. + " + ::= { wlsxWlanRadioEntry 5 } + + wlanAPRadioUtilization OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The Utilization of the radio as a percentage of the total capacity. + " + ::= { wlsxWlanRadioEntry 6 } + + + wlanAPRadioNumAssociatedClients OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The number of Clients associated to this radio. + " + ::= { wlsxWlanRadioEntry 7 } + + + wlanAPRadioNumMonitoredClients OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The number of Clients this Radio is monitoring. + " + ::= { wlsxWlanRadioEntry 8 } + + + wlanAPRadioNumActiveBSSIDs OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The number of active BSSIDs on this Radio. + " + ::= { wlsxWlanRadioEntry 9 } + + + wlanAPRadioNumMonitoredBSSIDs OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The number of AP BSSIDs this radio is monitoring. + " + ::= { wlsxWlanRadioEntry 10 } + + wlanAPRadioBearing OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + " + Antenna Bearing in degrees from True North. + Unsigned floating-point value. Range: 0-360. + " + ::= { wlsxWlanRadioEntry 11 } + + wlanAPRadioTiltAngle OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + " + Tilt angle of antenna in degrees. -ve for downtilt, + +ve for uptilt. Signed floating-point value. Range: -90 to +90. + " + ::= { wlsxWlanRadioEntry 12 } + + wlanAPRadioHTMode OBJECT-TYPE + SYNTAX ArubaHTMode + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The HT mode of the radio, if any. + " + ::= { wlsxWlanRadioEntry 13 } + + wlanAPRadioHTExtChannel OBJECT-TYPE + SYNTAX ArubaHTExtChannel + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Indicates the offset of the extension channel, if any. Will return secondary channel + number in 80+80 MHz mode. + " + ::= { wlsxWlanRadioEntry 14 } + + wlanAPRadioHTChannel OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + " + A display string indicating the current channel. If wlanAPRadioHTExtChannel + is set to 'above' or 'below', then the channel number will be appended + with '+' or '-' respectively. + " + ::= { wlsxWlanRadioEntry 15 } + + wlanAPRadioAPName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Name of the AP the radio belongs to" + ::= { wlsxWlanRadioEntry 16 } + + wlanAPRadioTransmitPower10x OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The current power level of the radio. (Transmitted as txpwr*10) + " + ::= { wlsxWlanRadioEntry 17 } + +-- Local Access Point Table. + + wlsxWlanAPBssidTable OBJECT-TYPE + SYNTAX SEQUENCE OF WlanAPBssidEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " + This table lists all the BSSIDs active on this controller. + " + ::= { wlsxWlanAccessPointInfoGroup 7 } + + wlsxWlanAPBssidEntry OBJECT-TYPE + SYNTAX WlanAPBssidEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "BSSID Entry" + INDEX {wlanAPMacAddress, wlanAPRadioNumber, wlanAPBSSID} + ::= { wlsxWlanAPBssidTable 1 } + + WlanAPBssidEntry ::= + SEQUENCE { + wlanAPBSSID MacAddress, + wlanAPESSID DisplayString, + wlanAPBssidSlot Unsigned32, + wlanAPBssidPort Unsigned32, + wlanAPBssidPhyType ArubaPhyType, + wlanAPBssidRogueType ArubaRogueApType, + wlanAPBssidMode INTEGER, + wlanAPBssidChannel INTEGER, + wlanAPBssidUpTime TimeTicks, + wlanAPBssidInactiveTime TimeTicks, + wlanAPBssidLoadBalancing TruthValue, + wlanAPBssidNumAssociatedStations Unsigned32, + wlanAPBssidAPMacAddress MacAddress, + wlanAPBssidPhyNumber Integer32, + wlanAPBssidHTMode ArubaHTMode, + wlanAPBssidHTExtChannel ArubaHTExtChannel, + wlanAPBssidHTChannel DisplayString, + wlanAPBssidSnr Integer32 + } + + wlanAPBSSID OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " + The MAC address of the Access Point. + " + ::= { wlsxWlanAPBssidEntry 1 } + + wlanAPESSID OBJECT-TYPE + SYNTAX DisplayString(SIZE(0..64)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + ESSID this BSSID is advertising. + " + ::= { wlsxWlanAPBssidEntry 2 } + + wlanAPBssidSlot OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Slot to which the Access Point is connected. + " + ::= { wlsxWlanAPBssidEntry 3 } + + wlanAPBssidPort OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Port to which the Access Point is connected. + " + ::= { wlsxWlanAPBssidEntry 4 } + + wlanAPBssidPhyType OBJECT-TYPE + SYNTAX ArubaPhyType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Physical Layer Protocol support of the AP. + " + ::= { wlsxWlanAPBssidEntry 5 } + + wlanAPBssidRogueType OBJECT-TYPE + SYNTAX ArubaRogueApType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The type of the Rogue. + " + ::= { wlsxWlanAPBssidEntry 6 } + + wlanAPBssidMode OBJECT-TYPE + SYNTAX INTEGER{ + ap(1), + am(2), + mpp(3), + mp(4) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Indicates whether the Access point is an Air Monitor or regular AP + or Mesh Portal or Mesh Point. + " + ::= { wlsxWlanAPBssidEntry 7 } + + wlanAPBssidChannel OBJECT-TYPE + SYNTAX INTEGER(1..165) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The current operating channel. + " + ::= { wlsxWlanAPBssidEntry 8 } + + wlanAPBssidUpTime OBJECT-TYPE + SYNTAX TimeTicks + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Time (in hundredths of seconds) since the tunnel was created + between the access point and controller + " + ::= { wlsxWlanAPBssidEntry 9 } + + wlanAPBssidInactiveTime OBJECT-TYPE + SYNTAX TimeTicks + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Time (in hundredths of seconds) since any activity took place on + the BSSID. + " + ::= { wlsxWlanAPBssidEntry 10 } + + wlanAPBssidLoadBalancing OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Indicates whether load balancing is enabled or not. + " + ::= { wlsxWlanAPBssidEntry 11 } + + wlanAPBssidNumAssociatedStations OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Indicates the number of stations associated to this BSSID. + " + ::= { wlsxWlanAPBssidEntry 12 } + + + wlanAPBssidAPMacAddress OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Indicates the Access Point to which this BSSID belongs. + " + ::= { wlsxWlanAPBssidEntry 13 } + + wlanAPBssidPhyNumber OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Indicates the radio number to which this BSSID belongs. + " + ::= { wlsxWlanAPBssidEntry 14 } + + wlanAPBssidHTMode OBJECT-TYPE + SYNTAX ArubaHTMode + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Indicates the HT mode of this BSSID, if any. + " + ::= { wlsxWlanAPBssidEntry 15 } + + wlanAPBssidHTExtChannel OBJECT-TYPE + SYNTAX ArubaHTExtChannel + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Indicates the offset of the 40MHz extension channel, if any. + " + ::= { wlsxWlanAPBssidEntry 16 } + + wlanAPBssidHTChannel OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + A display string indicating the current channel. If wlanAPBssidHTExtChannel + is set to 'above' or 'below', then the channel number will be appended + with '+' or '-' respectively. + " + ::= { wlsxWlanAPBssidEntry 17 } + + wlanAPBssidSnr OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Indicates the Signal Noise Ratio of this BSSID. + " + ::= { wlsxWlanAPBssidEntry 18 } + +-- ESSID Table + + wlsxWlanESSIDTable OBJECT-TYPE + SYNTAX SEQUENCE OF WlanESSIDEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " + This Table lists all the ESSIDs advertised by this controller. + " + ::= { wlsxWlanAccessPointInfoGroup 8 } + + wlsxWlanESSIDEntry OBJECT-TYPE + SYNTAX WlanESSIDEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "ESSID Entry" + INDEX {wlanESSID} + ::= { wlsxWlanESSIDTable 1 } + + WlanESSIDEntry ::= + SEQUENCE { + wlanESSID DisplayString, + wlanESSIDNumStations Unsigned32, + wlanESSIDNumAccessPointsUp Unsigned32, + wlanESSIDNumAccessPointsDown Unsigned32, + wlanESSIDEncryptionType ArubaEncryptionMethods + } + + wlanESSID OBJECT-TYPE + SYNTAX DisplayString(SIZE(0..64)) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " + The ESSID being advertised. + " + ::= { wlsxWlanESSIDEntry 1 } + + wlanESSIDNumStations OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The number of stations connected to this ESSID. + " + ::= { wlsxWlanESSIDEntry 2 } + + wlanESSIDNumAccessPointsUp OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The number of APs currently advertising this ESSID. + " + ::= { wlsxWlanESSIDEntry 3 } + + wlanESSIDNumAccessPointsDown OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The number of APs configured to advertise this ESSID that + are not currently operational. + " + ::= { wlsxWlanESSIDEntry 4 } + + wlanESSIDEncryptionType OBJECT-TYPE + SYNTAX ArubaEncryptionMethods + + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The encryption methods supported on this ESSID. + " + ::= { wlsxWlanESSIDEntry 5 } + +-- ESSID Vlan Pool Table + + wlsxWlanESSIDVlanPoolTable OBJECT-TYPE + SYNTAX SEQUENCE OF WlanESSIDVlanPoolEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " + This Table lists all the VLANs associated with this ESSID. + " + ::= { wlsxWlanAccessPointInfoGroup 9 } + + wlsxWlanESSIDVlanPoolEntry OBJECT-TYPE + SYNTAX WlanESSIDVlanPoolEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "ESSID Vlan Pool Entry" + INDEX {wlanESSID, wlanESSIDVlanId} + ::= { wlsxWlanESSIDVlanPoolTable 1 } + + WlanESSIDVlanPoolEntry ::= + SEQUENCE { + wlanESSIDVlanId Unsigned32, + wlanESSIDVlanPoolStatus RowStatus + } + + wlanESSIDVlanId OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " + VLAN which is part of the VLAN pool for this ESSID. + " + ::= { wlsxWlanESSIDVlanPoolEntry 1 } + + wlanESSIDVlanPoolStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + " + Row status object used to indicate the status of the row. + " + ::= { wlsxWlanESSIDVlanPoolEntry 2 } + +--Station Info Group contains the State information for the stations. + +--Station Table contains all the station associated with an AP. + + wlsxWlanStationTable OBJECT-TYPE + SYNTAX SEQUENCE OF WlanStationEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " + This Table lists all the wireless stations associated with the + Access points connected to this controller. + " + + ::= { wlsxWlanStationInfoGroup 1} + + wlsxWlanStationEntry OBJECT-TYPE + SYNTAX WlanStationEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Station Entry" + INDEX {wlanStaPhyAddress} + ::= { wlsxWlanStationTable 1 } + + WlanStationEntry ::= + SEQUENCE { + wlanStaPhyAddress MacAddress, + wlanStaApBssid MacAddress, + wlanStaPhyType ArubaPhyType, + wlanStaIsAuthenticated TruthValue, + wlanStaIsAssociated TruthValue, + wlanStaChannel INTEGER, + wlanStaVlanId ArubaVlanValidRange, + wlanStaVOIPState TruthValue, + wlanStaVOIPProtocol ArubaVoipProtocolType, + wlanStaTransmitRate Unsigned32, + wlanStaAssociationID Unsigned32, + wlanStaAccessPointESSID DisplayString, + wlanStaPhyNumber Integer32, + wlanStaRSSI Integer32, + wlanStaUpTime TimeTicks, + wlanStaHTMode ArubaHTMode, + wlanStaTransmitRateCode Unsigned32 + } + + wlanStaPhyAddress OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " + The Physical Address of the Station. + " + ::= { wlsxWlanStationEntry 1 } + + wlanStaApBssid OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The Access point to which this station last associated to. + " + ::= { wlsxWlanStationEntry 2 } + + wlanStaPhyType OBJECT-TYPE + SYNTAX ArubaPhyType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Type of the Station. + " + ::= { wlsxWlanStationEntry 3 } + + wlanStaIsAuthenticated OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Indicates whether the station is authenticated. + " + ::= { wlsxWlanStationEntry 4 } + + wlanStaIsAssociated OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Indicates whether the station is associated. + " + ::= { wlsxWlanStationEntry 5 } + + wlanStaChannel OBJECT-TYPE + SYNTAX INTEGER(1..165) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Channel on which the station is associated. + " + ::= { wlsxWlanStationEntry 6 } + + wlanStaVlanId OBJECT-TYPE + SYNTAX ArubaVlanValidRange + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + VLAN in which the station is present. + " + ::= { wlsxWlanStationEntry 7 } + + wlanStaVOIPState OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The State of VoIP for this station. + " + ::= { wlsxWlanStationEntry 8 } + + wlanStaVOIPProtocol OBJECT-TYPE + SYNTAX ArubaVoipProtocolType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + If VoIP is enabled, the type of the protocol supported. + " + ::= { wlsxWlanStationEntry 9 } + + wlanStaTransmitRate OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Transmit rate with which the Station is associated with this system. + " + ::= { wlsxWlanStationEntry 10 } + + wlanStaAssociationID OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + AID with which the Station is associated with this system. + " + ::= { wlsxWlanStationEntry 11 } + + wlanStaAccessPointESSID OBJECT-TYPE + SYNTAX DisplayString(SIZE(0..64)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + ESSID of the Access point + " + ::= { wlsxWlanStationEntry 12 } + + wlanStaPhyNumber OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Radio PHY number to which the station is associated + " + ::= { wlsxWlanStationEntry 13 } + + wlanStaRSSI OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Signal to Noise ratio for the station. + " + ::= { wlsxWlanStationEntry 14 } + + + wlanStaUpTime OBJECT-TYPE + SYNTAX TimeTicks + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Time since the station associated to the current BSSID. + " + ::= { wlsxWlanStationEntry 15 } + + wlanStaHTMode OBJECT-TYPE + SYNTAX ArubaHTMode + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The HT status of the station. + " + ::= { wlsxWlanStationEntry 16 } + + wlanStaTransmitRateCode OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Transmit rate code with which the Station is associated with this system, unit is mbps. + " + ::= { wlsxWlanStationEntry 17 } + +--Station Association Failure Table contains all the Stations that failed to +--associate an ap. + + wlsxWlanStaAssociationFailureTable OBJECT-TYPE + SYNTAX SEQUENCE OF WlanStaAssociationFailureEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " + This Table lists all the stations and the BSSID's to which they + failed to associate. Once a station successfully associates, + association failure entries are not reported for that station. + " + + ::= { wlsxWlanStationInfoGroup 2} + + wlsxWlanStaAssociationFailureEntry OBJECT-TYPE + SYNTAX WlanStaAssociationFailureEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Station Association Failure Entry" + INDEX {wlanStaPhyAddress, wlanAPBSSID} + ::= { wlsxWlanStaAssociationFailureTable 1 } + + WlanStaAssociationFailureEntry ::= + SEQUENCE { + wlanStaAssocFailureApName DisplayString, + wlanStaAssocFailureApEssid DisplayString, + wlanStaAssocFailurePhyNum Integer32, + wlanStaAssocFailurePhyType ArubaPhyType, + wlanStaAssocFailureElapsedTime TimeTicks, + wlanStaAssocFailureReason DisplayString + } + + wlanStaAssocFailureApName OBJECT-TYPE + SYNTAX DisplayString(SIZE(0..64)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Name of the Access Point to which this station tried to associate. + " + ::= { wlsxWlanStaAssociationFailureEntry 1 } + + wlanStaAssocFailureApEssid OBJECT-TYPE + SYNTAX DisplayString(SIZE(0..64)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + ESSID to which the station association failed. + " + ::= { wlsxWlanStaAssociationFailureEntry 2 } + + wlanStaAssocFailurePhyNum OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Radio PHY number to which the station tried to associate. + " + ::= { wlsxWlanStaAssociationFailureEntry 3 } + + wlanStaAssocFailurePhyType OBJECT-TYPE + SYNTAX ArubaPhyType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Radio PHY Type of the Station. + " + ::= { wlsxWlanStaAssociationFailureEntry 4 } + + wlanStaAssocFailureElapsedTime OBJECT-TYPE + SYNTAX TimeTicks + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Elapsed time in timeticks after the station's failure to associate. + " + ::= { wlsxWlanStaAssociationFailureEntry 5 } + + wlanStaAssocFailureReason OBJECT-TYPE + SYNTAX DisplayString(SIZE(0..80)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Reason for the Station association failure + " + ::= { wlsxWlanStaAssociationFailureEntry 6 } + +-- Stats group contains tables for station statistics, BSSID statistics and +-- AP statistics. + + wlsxWlanAPStatsTable OBJECT-TYPE + SYNTAX SEQUENCE OF WlanAPStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " + This Table lists the statistics of all the Access Points connected + to the controller. + " + ::= { wlsxWlanAccessPointStatsGroup 1 } + + wlsxWlanAPStatsEntry OBJECT-TYPE + SYNTAX WlanAPStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Access Point Stats entry" + INDEX {wlanAPMacAddress, wlanAPRadioNumber, wlanAPBSSID} + ::= { wlsxWlanAPStatsTable 1 } + + WlanAPStatsEntry ::= + SEQUENCE { + wlanAPCurrentChannel Unsigned32, + wlanAPNumClients Integer32, + wlanAPTxPkts Counter32, + wlanAPTxBytes Counter32, + wlanAPRxPkts Counter32, + wlanAPRxBytes Counter32, + wlanAPTxDeauthentications Counter32, + wlanAPRxDeauthentications Counter32, + wlanAPChannelThroughput Integer32, + wlanAPFrameRetryRate Integer32, + wlanAPFrameLowSpeedRate Integer32, + wlanAPFrameNonUnicastRate Integer32, + wlanAPFrameFragmentationRate Integer32, + wlanAPFrameBandwidthRate Integer32, + wlanAPFrameRetryErrorRate Integer32, + wlanAPChannelErrorRate Integer32, + wlanAPFrameReceiveErrorRate Integer32, + wlanAPRxDataPkts Counter32, + wlanAPRxDataBytes Counter32, + wlanAPTxDataPkts Counter32, + wlanAPTxDataBytes Counter32, + wlanAPRxDataPkts64 Counter64, + wlanAPRxDataBytes64 Counter64, + wlanAPTxDataPkts64 Counter64, + wlanAPTxDataBytes64 Counter64, + wlanAPWiredRxErrorPkts Counter32, + wlanAPRxErrorPkts Counter32 + } + + wlanAPCurrentChannel OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The channel the AP is currently using. + " + ::= { wlsxWlanAPStatsEntry 1 } + + wlanAPNumClients OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The number of clients associated to this BSSID. + " + ::= { wlsxWlanAPStatsEntry 2 } + + wlanAPTxPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The number of packets transmitted on this BSSID. + " + ::= { wlsxWlanAPStatsEntry 3 } + + wlanAPTxBytes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The number of bytes transmitted on this BSSID. + " + ::= { wlsxWlanAPStatsEntry 4 } + + wlanAPRxPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The number of packets received on this BSSID. + " + ::= { wlsxWlanAPStatsEntry 5 } + + wlanAPRxBytes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The number of bytes received on this BSSID. + " + ::= { wlsxWlanAPStatsEntry 6 } + + wlanAPTxDeauthentications OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The number of deauthentications transmitted on this BSSID. + " + ::= { wlsxWlanAPStatsEntry 7 } + + wlanAPRxDeauthentications OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The number of deauthentications received on this BSSID. + " + ::= { wlsxWlanAPStatsEntry 8 } + + wlanAPChannelThroughput OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The throughput achieved on this channel. + " + ::= { wlsxWlanAPStatsEntry 9 } + + wlanAPFrameRetryRate OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The number of retry + packets as a percentage of the total packets + transmitted and received by this BSSID. + " + ::= { wlsxWlanAPStatsEntry 10 } + + wlanAPFrameLowSpeedRate OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The number of low data rate (<= 18Mbps for A/G bands and <=2Mbps + for B band) packets as a percentage of the total packets + transmitted and received by this BSSID + " + ::= { wlsxWlanAPStatsEntry 11 } + + wlanAPFrameNonUnicastRate OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The number of broadcast and multicast + packets as a percentage of the total packets + transmitted on this BSSIDchannel. + " + ::= { wlsxWlanAPStatsEntry 12 } + + wlanAPFrameFragmentationRate OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The number of fragments + as a percentage of the total packets + transmitted by this BSSID. + " + ::= { wlsxWlanAPStatsEntry 13 } + + wlanAPFrameBandwidthRate OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The bandwidth of this BSSID in Kbps. + " + ::= { wlsxWlanAPStatsEntry 14 } + + wlanAPFrameRetryErrorRate OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The number of error packets + as a percentage of the total packets + received on this BSSID. + " + ::= { wlsxWlanAPStatsEntry 15 } + + wlanAPChannelErrorRate OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The number of error packets + as a percentage of the total packets received + on the current channel. + " + ::= { wlsxWlanAPStatsEntry 16 } + + wlanAPFrameReceiveErrorRate OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The number of error packets + as a percentage of the total packets + received on this BSSID. + " + ::= { wlsxWlanAPStatsEntry 17 } + + wlanAPRxDataPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + " + The number of packets received on this BSSID. + " + ::= { wlsxWlanAPStatsEntry 18 } + + wlanAPRxDataBytes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + " + The number of bytes received on this BSSID. + " + ::= { wlsxWlanAPStatsEntry 19 } + + wlanAPTxDataPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + " + The number of packets transmitted on this BSSID. + " + ::= { wlsxWlanAPStatsEntry 20 } + + wlanAPTxDataBytes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + " + The number of bytes transmitted on this BSSID. + " + ::= { wlsxWlanAPStatsEntry 21 } + + wlanAPRxDataPkts64 OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The number of packets received on this BSSID. + " + ::= { wlsxWlanAPStatsEntry 22 } + + wlanAPRxDataBytes64 OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The number of bytes received on this BSSID. + " + ::= { wlsxWlanAPStatsEntry 23 } + + wlanAPTxDataPkts64 OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The number of packets transmitted on this BSSID. + " + ::= { wlsxWlanAPStatsEntry 24 } + + wlanAPTxDataBytes64 OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The number of bytes transmitted on this BSSID. + " + ::= { wlsxWlanAPStatsEntry 25 } + + wlanAPWiredRxErrorPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The number of error packets received from the controller on this BSSID. + " + ::= { wlsxWlanAPStatsEntry 26 } + + wlanAPRxErrorPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The number of error packets received from stations on this BSSID. + " + ::= { wlsxWlanAPStatsEntry 27 } + +-- This table breaks down the AP statistics observed into different +-- rate categories. + + wlsxWlanAPRateStatsTable OBJECT-TYPE + SYNTAX SEQUENCE OF WlsxWlanAPRateStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " + This table contains all the AP Packet and Byte Counts + but represented in terms of rate categories. + " + + ::= { wlsxWlanAccessPointStatsGroup 2 } + + wlsxWlanAPRateStatsEntry OBJECT-TYPE + SYNTAX WlsxWlanAPRateStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Data rate based packet and byte count entry for an AP" + INDEX {wlanAPMacAddress, wlanAPRadioNumber, wlanAPBSSID} + ::= { wlsxWlanAPRateStatsTable 1 } + + WlsxWlanAPRateStatsEntry ::= + SEQUENCE { + wlanAPStatsTotPktsAt1Mbps Counter32, + wlanAPStatsTotBytesAt1Mbps Counter32, + wlanAPStatsTotPktsAt2Mbps Counter32, + wlanAPStatsTotBytesAt2Mbps Counter32, + wlanAPStatsTotPktsAt5Mbps Counter32, + wlanAPStatsTotBytesAt5Mbps Counter32, + wlanAPStatsTotPktsAt11Mbps Counter32, + wlanAPStatsTotBytesAt11Mbps Counter32, + wlanAPStatsTotPktsAt6Mbps Counter32, + wlanAPStatsTotBytesAt6Mbps Counter32, + wlanAPStatsTotPktsAt12Mbps Counter32, + wlanAPStatsTotBytesAt12Mbps Counter32, + wlanAPStatsTotPktsAt18Mbps Counter32, + wlanAPStatsTotBytesAt18Mbps Counter32, + wlanAPStatsTotPktsAt24Mbps Counter32, + wlanAPStatsTotBytesAt24Mbps Counter32, + wlanAPStatsTotPktsAt36Mbps Counter32, + wlanAPStatsTotBytesAt36Mbps Counter32, + wlanAPStatsTotPktsAt48Mbps Counter32, + wlanAPStatsTotBytesAt48Mbps Counter32, + wlanAPStatsTotPktsAt54Mbps Counter32, + wlanAPStatsTotBytesAt54Mbps Counter32, + wlanAPStatsTotPktsAt9Mbps Counter32, + wlanAPStatsTotBytesAt9Mbps Counter32 +-- wlanAPStatsTotPktsAtHT6dot5Mbps Counter32, +-- wlanAPStatsTotBytesAtHT6dot5Mbps Counter32, +-- wlanAPStatsTotPktsAtHT13Mbps Counter32, +-- wlanAPStatsTotBytesAtHT13Mbps Counter32, +-- wlanAPStatsTotPktsAtHT13dot5Mbps Counter32, +-- wlanAPStatsTotBytesAtHT13dot5Mbps Counter32, +-- wlanAPStatsTotPktsAtHT15Mbps Counter32, +-- wlanAPStatsTotBytesAtHT15Mbps Counter32, +-- wlanAPStatsTotPktsAtHT19dot5Mbps Counter32, +-- wlanAPStatsTotBytesAtHT19dot5Mbps Counter32, +-- wlanAPStatsTotPktsAtHT26Mbps Counter32, +-- wlanAPStatsTotBytesAtHT26Mbps Counter32, +-- wlanAPStatsTotPktsAtHT27Mbps Counter32, +-- wlanAPStatsTotBytesAtHT27Mbps Counter32, +-- wlanAPStatsTotPktsAtHT30Mbps Counter32, +-- wlanAPStatsTotBytesAtHT30Mbps Counter32, +-- wlanAPStatsTotPktsAtHT39Mbps Counter32, +-- wlanAPStatsTotBytesAtHT39Mbps Counter32, +-- wlanAPStatsTotPktsAtHT40dot5Mbps Counter32, +-- wlanAPStatsTotBytesAtHT40dot5Mbps Counter32, +-- wlanAPStatsTotPktsAtHT45Mbps Counter32, +-- wlanAPStatsTotBytesAtHT45Mbps Counter32, +-- wlanAPStatsTotPktsAtHT52Mbps Counter32, +-- wlanAPStatsTotBytesAtHT52Mbps Counter32, +-- wlanAPStatsTotPktsAtHT54Mbps Counter32, +-- wlanAPStatsTotBytesAtHT54Mbps Counter32, +-- wlanAPStatsTotPktsAtHT58dot5Mbps Counter32, +-- wlanAPStatsTotBytesAtHT58dot5Mbps Counter32, +-- wlanAPStatsTotPktsAtHT60Mbps Counter32, +-- wlanAPStatsTotBytesAtHT60Mbps Counter32, +-- wlanAPStatsTotPktsAtHT65Mbps Counter32, +-- wlanAPStatsTotBytesAtHT65Mbps Counter32, +-- wlanAPStatsTotPktsAtHT78Mbps Counter32, +-- wlanAPStatsTotBytesAtHT78Mbps Counter32, +-- wlanAPStatsTotPktsAtHT81Mbps Counter32, +-- wlanAPStatsTotBytesAtHT81Mbps Counter32, +-- wlanAPStatsTotPktsAtHT90Mbps Counter32, +-- wlanAPStatsTotBytesAtHT90Mbps Counter32, +-- wlanAPStatsTotPktsAtHT104Mbps Counter32, +-- wlanAPStatsTotBytesAtHT104Mbps Counter32, +-- wlanAPStatsTotPktsAtHT108Mbps Counter32, +-- wlanAPStatsTotBytesAtHT108Mbps Counter32, +-- wlanAPStatsTotPktsAtHT117Mbps Counter32, +-- wlanAPStatsTotBytesAtHT117Mbps Counter32, +-- wlanAPStatsTotPktsAtHT120Mbps Counter32, +-- wlanAPStatsTotBytesAtHT120Mbps Counter32, +-- wlanAPStatsTotPktsAtHT121dot5Mbps Counter32, +-- wlanAPStatsTotBytesAtHT121dot5Mbps Counter32, +-- wlanAPStatsTotPktsAtHT130Mbps Counter32, +-- wlanAPStatsTotBytesAtHT130Mbps Counter32, +-- wlanAPStatsTotPktsAtHT135Mbps Counter32, +-- wlanAPStatsTotBytesAtHT135Mbps Counter32, +-- wlanAPStatsTotPktsAtHT150Mbps Counter32, +-- wlanAPStatsTotBytesAtHT150Mbps Counter32, +-- wlanAPStatsTotPktsAtHT162Mbps Counter32, +-- wlanAPStatsTotBytesAtHT162Mbps Counter32, +-- wlanAPStatsTotPktsAtHT180Mbps Counter32, +-- wlanAPStatsTotBytesAtHT180Mbps Counter32, +-- wlanAPStatsTotPktsAtHT216Mbps Counter32, +-- wlanAPStatsTotBytesAtHT216Mbps Counter32, +-- wlanAPStatsTotPktsAtHT240Mbps Counter32, +-- wlanAPStatsTotBytesAtHT240Mbps Counter32, +-- wlanAPStatsTotPktsAtHT243Mbps Counter32, +-- wlanAPStatsTotBytesAtHT243Mbps Counter32, +-- wlanAPStatsTotPktsAtHT270Mbps Counter32, +-- wlanAPStatsTotBytesAtHT270Mbps Counter32, +-- wlanAPStatsTotPktsAtHT300Mbps Counter32, +-- wlanAPStatsTotBytesAtHT300Mbps Counter32 + } + + wlanAPStatsTotPktsAt1Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of packets observed + on this BSSID at 1Mbps rate. + " + ::= { wlsxWlanAPRateStatsEntry 1 } + + wlanAPStatsTotBytesAt1Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of Bytes observed + on this BSSID at 1Mbps rate. + " + ::= { wlsxWlanAPRateStatsEntry 2 } + + wlanAPStatsTotPktsAt2Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of packets observed + on this BSSID at 2Mbps rate. + " + ::= { wlsxWlanAPRateStatsEntry 3 } + + wlanAPStatsTotBytesAt2Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of Bytes observed + on this BSSID at 2Mbps rate. + " + ::= { wlsxWlanAPRateStatsEntry 4 } + + wlanAPStatsTotPktsAt5Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of packets observed + on this BSSID at 5Mbps rate. + " + ::= { wlsxWlanAPRateStatsEntry 5 } + + wlanAPStatsTotBytesAt5Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of Bytes observed + on this BSSID at 5Mbps rate. + " + ::= { wlsxWlanAPRateStatsEntry 6 } + + wlanAPStatsTotPktsAt11Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of packets observed + on this BSSID at 11Mbps rate. + " + ::= { wlsxWlanAPRateStatsEntry 7 } + + wlanAPStatsTotBytesAt11Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of Bytes observed + on this BSSID at 11Mbps rate. + " + ::= { wlsxWlanAPRateStatsEntry 8 } + + wlanAPStatsTotPktsAt6Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of packets observed + on this BSSID at 6Mbps rate. + " + ::= { wlsxWlanAPRateStatsEntry 9 } + + wlanAPStatsTotBytesAt6Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of Bytes observed + on this BSSID at 6Mbps rate. + " + ::= { wlsxWlanAPRateStatsEntry 10 } + + wlanAPStatsTotPktsAt12Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of packets observed + on this BSSID at 12Mbps rate. + " + ::= { wlsxWlanAPRateStatsEntry 11 } + + wlanAPStatsTotBytesAt12Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of Bytes observed + on this BSSID at 12Mbps rate. + " + ::= { wlsxWlanAPRateStatsEntry 12 } + + wlanAPStatsTotPktsAt18Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of packets observed + on this BSSID at 18Mbps rate. + " + ::= { wlsxWlanAPRateStatsEntry 13 } + + wlanAPStatsTotBytesAt18Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of Bytes observed + on this BSSID at 18Mbps rate. + " + ::= { wlsxWlanAPRateStatsEntry 14 } + + wlanAPStatsTotPktsAt24Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of packets observed + on this BSSID at 24Mbps rate. + " + ::= { wlsxWlanAPRateStatsEntry 15 } + + wlanAPStatsTotBytesAt24Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of Bytes observed + on this BSSID at 24Mbps rate. + " + ::= { wlsxWlanAPRateStatsEntry 16 } + + wlanAPStatsTotPktsAt36Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of packets observed + on this BSSID at 36Mbps rate. + " + ::= { wlsxWlanAPRateStatsEntry 17 } + + wlanAPStatsTotBytesAt36Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of Bytes observed + on this BSSID at 36Mbps rate. + " + ::= { wlsxWlanAPRateStatsEntry 18 } + + wlanAPStatsTotPktsAt48Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of packets observed + on this BSSID at 48Mbps rate. + " + ::= { wlsxWlanAPRateStatsEntry 19 } + + wlanAPStatsTotBytesAt48Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of Bytes observed + on this BSSID at 48Mbps rate. + " + ::= { wlsxWlanAPRateStatsEntry 20 } + + wlanAPStatsTotPktsAt54Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of packets observed + on this BSSID at 54Mbps rate. + " + ::= { wlsxWlanAPRateStatsEntry 21 } + + wlanAPStatsTotBytesAt54Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of Bytes observed + on this BSSID at 54Mbps rate. + " + ::= { wlsxWlanAPRateStatsEntry 22 } + + wlanAPStatsTotPktsAt9Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of packets observed + on this BSSID at 9Mbps rate. + " + ::= { wlsxWlanAPRateStatsEntry 23 } + + wlanAPStatsTotBytesAt9Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of Bytes observed + on this BSSID at 9Mbps rate. + " + ::= { wlsxWlanAPRateStatsEntry 24 } + +-- wlanAPStatsTotPktsAtHT6dot5Mbps OBJECT-TYPE +-- SYNTAX Counter32 +-- MAX-ACCESS read-only +-- STATUS current +-- DESCRIPTION +-- " +-- This attribute indicates the total number of packets observed +-- on this BSSID at the HT 6.5 rate. +-- " +-- ::= { wlsxWlanAPRateStatsEntry 25 } +-- +-- wlanAPStatsTotBytesAtHT6dot5Mbps OBJECT-TYPE +-- SYNTAX Counter32 +-- MAX-ACCESS read-only +-- STATUS current +-- DESCRIPTION +-- " +-- This attribute indicates the total number of bytes observed +-- on this BSSID at the HT 6.5 rate. +-- " +-- ::= { wlsxWlanAPRateStatsEntry 26 } +-- +-- wlanAPStatsTotPktsAtHT13Mbps OBJECT-TYPE +-- SYNTAX Counter32 +-- MAX-ACCESS read-only +-- STATUS current +-- DESCRIPTION +-- " +-- This attribute indicates the total number of packets observed +-- on this BSSID at the HT 13.0 rate. +-- " +-- ::= { wlsxWlanAPRateStatsEntry 27 } +-- +-- wlanAPStatsTotBytesAtHT13Mbps OBJECT-TYPE +-- SYNTAX Counter32 +-- MAX-ACCESS read-only +-- STATUS current +-- DESCRIPTION +-- " +-- This attribute indicates the total number of bytes observed +-- on this BSSID at the HT 13.0 rate. +-- " +-- ::= { wlsxWlanAPRateStatsEntry 28 } +-- +-- wlanAPStatsTotPktsAtHT13dot5Mbps OBJECT-TYPE +-- SYNTAX Counter32 +-- MAX-ACCESS read-only +-- STATUS current +-- DESCRIPTION +-- " +-- This attribute indicates the total number of packets observed +-- on this BSSID at the HT 13.5 rate. +-- " +-- ::= { wlsxWlanAPRateStatsEntry 29 } +-- +-- wlanAPStatsTotBytesAtHT13dot5Mbps OBJECT-TYPE +-- SYNTAX Counter32 +-- MAX-ACCESS read-only +-- STATUS current +-- DESCRIPTION +-- " +-- This attribute indicates the total number of bytes observed +-- on this BSSID at the HT 13.5 rate. +-- " +-- ::= { wlsxWlanAPRateStatsEntry 30 } +-- +-- wlanAPStatsTotPktsAtHT15Mbps OBJECT-TYPE +-- SYNTAX Counter32 +-- MAX-ACCESS read-only +-- STATUS current +-- DESCRIPTION +-- " +-- This attribute indicates the total number of packets observed +-- on this BSSID at the HT 15.0 rate. +-- " +-- ::= { wlsxWlanAPRateStatsEntry 31 } +-- +-- wlanAPStatsTotBytesAtHT15Mbps OBJECT-TYPE +-- SYNTAX Counter32 +-- MAX-ACCESS read-only +-- STATUS current +-- DESCRIPTION +-- " +-- This attribute indicates the total number of bytes observed +-- on this BSSID at the HT 15.0 rate. +-- " +-- ::= { wlsxWlanAPRateStatsEntry 32 } +-- +-- wlanAPStatsTotPktsAtHT19dot5Mbps OBJECT-TYPE +-- SYNTAX Counter32 +-- MAX-ACCESS read-only +-- STATUS current +-- DESCRIPTION +-- " +-- This attribute indicates the total number of packets observed +-- on this BSSID at the HT 19.5 rate. +-- " +-- ::= { wlsxWlanAPRateStatsEntry 33 } +-- +-- wlanAPStatsTotBytesAtHT19dot5Mbps OBJECT-TYPE +-- SYNTAX Counter32 +-- MAX-ACCESS read-only +-- STATUS current +-- DESCRIPTION +-- " +-- This attribute indicates the total number of bytes observed +-- on this BSSID at the HT 19.5 rate. +-- " +-- ::= { wlsxWlanAPRateStatsEntry 34 } +-- +-- wlanAPStatsTotPktsAtHT26Mbps OBJECT-TYPE +-- SYNTAX Counter32 +-- MAX-ACCESS read-only +-- STATUS current +-- DESCRIPTION +-- " +-- This attribute indicates the total number of packets observed +-- on this BSSID at the HT 26.0 rate. +-- " +-- ::= { wlsxWlanAPRateStatsEntry 35 } +-- +-- wlanAPStatsTotBytesAtHT26Mbps OBJECT-TYPE +-- SYNTAX Counter32 +-- MAX-ACCESS read-only +-- STATUS current +-- DESCRIPTION +-- " +-- This attribute indicates the total number of bytes observed +-- on this BSSID at the HT 26.0 rate. +-- " +-- ::= { wlsxWlanAPRateStatsEntry 36 } +-- +-- wlanAPStatsTotPktsAtHT27Mbps OBJECT-TYPE +-- SYNTAX Counter32 +-- MAX-ACCESS read-only +-- STATUS current +-- DESCRIPTION +-- " +-- This attribute indicates the total number of packets observed +-- on this BSSID at the HT 27.0 rate. +-- " +-- ::= { wlsxWlanAPRateStatsEntry 37 } +-- +-- wlanAPStatsTotBytesAtHT27Mbps OBJECT-TYPE +-- SYNTAX Counter32 +-- MAX-ACCESS read-only +-- STATUS current +-- DESCRIPTION +-- " +-- This attribute indicates the total number of bytes observed +-- on this BSSID at the HT 27.0 rate. +-- " +-- ::= { wlsxWlanAPRateStatsEntry 38 } +-- +-- wlanAPStatsTotPktsAtHT30Mbps OBJECT-TYPE +-- SYNTAX Counter32 +-- MAX-ACCESS read-only +-- STATUS current +-- DESCRIPTION +-- " +-- This attribute indicates the total number of packets observed +-- on this BSSID at the HT 30.0 rate. +-- " +-- ::= { wlsxWlanAPRateStatsEntry 39 } +-- +-- wlanAPStatsTotBytesAtHT30Mbps OBJECT-TYPE +-- SYNTAX Counter32 +-- MAX-ACCESS read-only +-- STATUS current +-- DESCRIPTION +-- " +-- This attribute indicates the total number of bytes observed +-- on this BSSID at the HT 30.0 rate. +-- " +-- ::= { wlsxWlanAPRateStatsEntry 40 } +-- +-- wlanAPStatsTotPktsAtHT39Mbps OBJECT-TYPE +-- SYNTAX Counter32 +-- MAX-ACCESS read-only +-- STATUS current +-- DESCRIPTION +-- " +-- This attribute indicates the total number of packets observed +-- on this BSSID at the HT 39.0 rate. +-- " +-- ::= { wlsxWlanAPRateStatsEntry 41 } +-- +-- wlanAPStatsTotBytesAtHT39Mbps OBJECT-TYPE +-- SYNTAX Counter32 +-- MAX-ACCESS read-only +-- STATUS current +-- DESCRIPTION +-- " +-- This attribute indicates the total number of bytes observed +-- on this BSSID at the HT 39.0 rate. +-- " +-- ::= { wlsxWlanAPRateStatsEntry 42 } +-- +-- wlanAPStatsTotPktsAtHT40dot5Mbps OBJECT-TYPE +-- SYNTAX Counter32 +-- MAX-ACCESS read-only +-- STATUS current +-- DESCRIPTION +-- " +-- This attribute indicates the total number of packets observed +-- on this BSSID at the HT 40.5 rate. +-- " +-- ::= { wlsxWlanAPRateStatsEntry 43 } +-- +-- wlanAPStatsTotBytesAtHT40dot5Mbps OBJECT-TYPE +-- SYNTAX Counter32 +-- MAX-ACCESS read-only +-- STATUS current +-- DESCRIPTION +-- " +-- This attribute indicates the total number of bytes observed +-- on this BSSID at the HT 40.5 rate. +-- " +-- ::= { wlsxWlanAPRateStatsEntry 44 } +-- +-- wlanAPStatsTotPktsAtHT45Mbps OBJECT-TYPE +-- SYNTAX Counter32 +-- MAX-ACCESS read-only +-- STATUS current +-- DESCRIPTION +-- " +-- This attribute indicates the total number of packets observed +-- on this BSSID at the HT 45.0 rate. +-- " +-- ::= { wlsxWlanAPRateStatsEntry 45 } +-- +-- wlanAPStatsTotBytesAtHT45Mbps OBJECT-TYPE +-- SYNTAX Counter32 +-- MAX-ACCESS read-only +-- STATUS current +-- DESCRIPTION +-- " +-- This attribute indicates the total number of bytes observed +-- on this BSSID at the HT 45.0 rate. +-- " +-- ::= { wlsxWlanAPRateStatsEntry 46 } +-- +-- wlanAPStatsTotPktsAtHT52Mbps OBJECT-TYPE +-- SYNTAX Counter32 +-- MAX-ACCESS read-only +-- STATUS current +-- DESCRIPTION +-- " +-- This attribute indicates the total number of packets observed +-- on this BSSID at the HT 52.0 rate. +-- " +-- ::= { wlsxWlanAPRateStatsEntry 47 } +-- +-- wlanAPStatsTotBytesAtHT52Mbps OBJECT-TYPE +-- SYNTAX Counter32 +-- MAX-ACCESS read-only +-- STATUS current +-- DESCRIPTION +-- " +-- This attribute indicates the total number of bytes observed +-- on this BSSID at the HT 52.0 rate. +-- " +-- ::= { wlsxWlanAPRateStatsEntry 48 } +-- +-- wlanAPStatsTotPktsAtHT54Mbps OBJECT-TYPE +-- SYNTAX Counter32 +-- MAX-ACCESS read-only +-- STATUS current +-- DESCRIPTION +-- " +-- This attribute indicates the total number of packets observed +-- on this BSSID at the HT 54.0 rate. +-- " +-- ::= { wlsxWlanAPRateStatsEntry 49 } +-- +-- wlanAPStatsTotBytesAtHT54Mbps OBJECT-TYPE +-- SYNTAX Counter32 +-- MAX-ACCESS read-only +-- STATUS current +-- DESCRIPTION +-- " +-- This attribute indicates the total number of bytes observed +-- on this BSSID at the HT 54.0 rate. +-- " +-- ::= { wlsxWlanAPRateStatsEntry 50 } +-- +-- wlanAPStatsTotPktsAtHT58dot5Mbps OBJECT-TYPE +-- SYNTAX Counter32 +-- MAX-ACCESS read-only +-- STATUS current +-- DESCRIPTION +-- " +-- This attribute indicates the total number of packets observed +-- on this BSSID at the HT 58.5 rate. +-- " +-- ::= { wlsxWlanAPRateStatsEntry 51 } +-- +-- wlanAPStatsTotBytesAtHT58dot5Mbps OBJECT-TYPE +-- SYNTAX Counter32 +-- MAX-ACCESS read-only +-- STATUS current +-- DESCRIPTION +-- " +-- This attribute indicates the total number of bytes observed +-- on this BSSID at the HT 58.5 rate. +-- " +-- ::= { wlsxWlanAPRateStatsEntry 52 } +-- +-- wlanAPStatsTotPktsAtHT60Mbps OBJECT-TYPE +-- SYNTAX Counter32 +-- MAX-ACCESS read-only +-- STATUS current +-- DESCRIPTION +-- " +-- This attribute indicates the total number of packets observed +-- on this BSSID at the HT 60.0 rate. +-- " +-- ::= { wlsxWlanAPRateStatsEntry 53 } +-- +-- wlanAPStatsTotBytesAtHT60Mbps OBJECT-TYPE +-- SYNTAX Counter32 +-- MAX-ACCESS read-only +-- STATUS current +-- DESCRIPTION +-- " +-- This attribute indicates the total number of bytes observed +-- on this BSSID at the HT 60.0 rate. +-- " +-- ::= { wlsxWlanAPRateStatsEntry 54 } +-- +-- wlanAPStatsTotPktsAtHT65Mbps OBJECT-TYPE +-- SYNTAX Counter32 +-- MAX-ACCESS read-only +-- STATUS current +-- DESCRIPTION +-- " +-- This attribute indicates the total number of packets observed +-- on this BSSID at the HT 65.0 rate. +-- " +-- ::= { wlsxWlanAPRateStatsEntry 55 } +-- +-- wlanAPStatsTotBytesAtHT65Mbps OBJECT-TYPE +-- SYNTAX Counter32 +-- MAX-ACCESS read-only +-- STATUS current +-- DESCRIPTION +-- " +-- This attribute indicates the total number of bytes observed +-- on this BSSID at the HT 65.0 rate. +-- " +-- ::= { wlsxWlanAPRateStatsEntry 56 } +-- +-- wlanAPStatsTotPktsAtHT78Mbps OBJECT-TYPE +-- SYNTAX Counter32 +-- MAX-ACCESS read-only +-- STATUS current +-- DESCRIPTION +-- " +-- This attribute indicates the total number of packets observed +-- on this BSSID at the HT 78.0 rate. +-- " +-- ::= { wlsxWlanAPRateStatsEntry 57 } +-- +-- wlanAPStatsTotBytesAtHT78Mbps OBJECT-TYPE +-- SYNTAX Counter32 +-- MAX-ACCESS read-only +-- STATUS current +-- DESCRIPTION +-- " +-- This attribute indicates the total number of bytes observed +-- on this BSSID at the HT 78.0 rate. +-- " +-- ::= { wlsxWlanAPRateStatsEntry 58 } +-- +-- wlanAPStatsTotPktsAtHT81Mbps OBJECT-TYPE +-- SYNTAX Counter32 +-- MAX-ACCESS read-only +-- STATUS current +-- DESCRIPTION +-- " +-- This attribute indicates the total number of packets observed +-- on this BSSID at the HT 81.0 rate. +-- " +-- ::= { wlsxWlanAPRateStatsEntry 59 } +-- +-- wlanAPStatsTotBytesAtHT81Mbps OBJECT-TYPE +-- SYNTAX Counter32 +-- MAX-ACCESS read-only +-- STATUS current +-- DESCRIPTION +-- " +-- This attribute indicates the total number of bytes observed +-- on this BSSID at the HT 81.0 rate. +-- " +-- ::= { wlsxWlanAPRateStatsEntry 60 } +-- +-- wlanAPStatsTotPktsAtHT90Mbps OBJECT-TYPE +-- SYNTAX Counter32 +-- MAX-ACCESS read-only +-- STATUS current +-- DESCRIPTION +-- " +-- This attribute indicates the total number of packets observed +-- on this BSSID at the HT 90.0 rate. +-- " +-- ::= { wlsxWlanAPRateStatsEntry 61 } +-- +-- wlanAPStatsTotBytesAtHT90Mbps OBJECT-TYPE +-- SYNTAX Counter32 +-- MAX-ACCESS read-only +-- STATUS current +-- DESCRIPTION +-- " +-- This attribute indicates the total number of bytes observed +-- on this BSSID at the HT 90.0 rate. +-- " +-- ::= { wlsxWlanAPRateStatsEntry 62 } +-- +-- wlanAPStatsTotPktsAtHT104Mbps OBJECT-TYPE +-- SYNTAX Counter32 +-- MAX-ACCESS read-only +-- STATUS current +-- DESCRIPTION +-- " +-- This attribute indicates the total number of packets observed +-- on this BSSID at the HT 104.0 rate. +-- " +-- ::= { wlsxWlanAPRateStatsEntry 63 } +-- +-- wlanAPStatsTotBytesAtHT104Mbps OBJECT-TYPE +-- SYNTAX Counter32 +-- MAX-ACCESS read-only +-- STATUS current +-- DESCRIPTION +-- " +-- This attribute indicates the total number of bytes observed +-- on this BSSID at the HT 104.0 rate. +-- " +-- ::= { wlsxWlanAPRateStatsEntry 64 } +-- +-- wlanAPStatsTotPktsAtHT108Mbps OBJECT-TYPE +-- SYNTAX Counter32 +-- MAX-ACCESS read-only +-- STATUS current +-- DESCRIPTION +-- " +-- This attribute indicates the total number of packets observed +-- on this BSSID at the HT 108.0 rate. +-- " +-- ::= { wlsxWlanAPRateStatsEntry 65 } +-- +-- wlanAPStatsTotBytesAtHT108Mbps OBJECT-TYPE +-- SYNTAX Counter32 +-- MAX-ACCESS read-only +-- STATUS current +-- DESCRIPTION +-- " +-- This attribute indicates the total number of bytes observed +-- on this BSSID at the HT 108.0 rate. +-- " +-- ::= { wlsxWlanAPRateStatsEntry 66 } +-- +-- wlanAPStatsTotPktsAtHT117Mbps OBJECT-TYPE +-- SYNTAX Counter32 +-- MAX-ACCESS read-only +-- STATUS current +-- DESCRIPTION +-- " +-- This attribute indicates the total number of packets observed +-- on this BSSID at the HT 117.0 rate. +-- " +-- ::= { wlsxWlanAPRateStatsEntry 67 } +-- +-- wlanAPStatsTotBytesAtHT117Mbps OBJECT-TYPE +-- SYNTAX Counter32 +-- MAX-ACCESS read-only +-- STATUS current +-- DESCRIPTION +-- " +-- This attribute indicates the total number of bytes observed +-- on this BSSID at the HT 117.0 rate. +-- " +-- ::= { wlsxWlanAPRateStatsEntry 68 } +-- +-- wlanAPStatsTotPktsAtHT120Mbps OBJECT-TYPE +-- SYNTAX Counter32 +-- MAX-ACCESS read-only +-- STATUS current +-- DESCRIPTION +-- " +-- This attribute indicates the total number of packets observed +-- on this BSSID at the HT 120.0 rate. +-- " +-- ::= { wlsxWlanAPRateStatsEntry 69 } +-- +-- wlanAPStatsTotBytesAtHT120Mbps OBJECT-TYPE +-- SYNTAX Counter32 +-- MAX-ACCESS read-only +-- STATUS current +-- DESCRIPTION +-- " +-- This attribute indicates the total number of bytes observed +-- on this BSSID at the HT 120.0 rate. +-- " +-- ::= { wlsxWlanAPRateStatsEntry 70 } +-- +-- wlanAPStatsTotPktsAtHT121dot5Mbps OBJECT-TYPE +-- SYNTAX Counter32 +-- MAX-ACCESS read-only +-- STATUS current +-- DESCRIPTION +-- " +-- This attribute indicates the total number of packets observed +-- on this BSSID at the HT 121.5 rate. +-- " +-- ::= { wlsxWlanAPRateStatsEntry 71 } +-- +-- wlanAPStatsTotBytesAtHT121dot5Mbps OBJECT-TYPE +-- SYNTAX Counter32 +-- MAX-ACCESS read-only +-- STATUS current +-- DESCRIPTION +-- " +-- This attribute indicates the total number of bytes observed +-- on this BSSID at the HT 121.5 rate. +-- " +-- ::= { wlsxWlanAPRateStatsEntry 72 } +-- +-- wlanAPStatsTotPktsAtHT130Mbps OBJECT-TYPE +-- SYNTAX Counter32 +-- MAX-ACCESS read-only +-- STATUS current +-- DESCRIPTION +-- " +-- This attribute indicates the total number of packets observed +-- on this BSSID at the HT 130.0 rate. +-- " +-- ::= { wlsxWlanAPRateStatsEntry 73 } +-- +-- wlanAPStatsTotBytesAtHT130Mbps OBJECT-TYPE +-- SYNTAX Counter32 +-- MAX-ACCESS read-only +-- STATUS current +-- DESCRIPTION +-- " +-- This attribute indicates the total number of bytes observed +-- on this BSSID at the HT 130.0 rate. +-- " +-- ::= { wlsxWlanAPRateStatsEntry 74 } +-- +-- wlanAPStatsTotPktsAtHT135Mbps OBJECT-TYPE +-- SYNTAX Counter32 +-- MAX-ACCESS read-only +-- STATUS current +-- DESCRIPTION +-- " +-- This attribute indicates the total number of packets observed +-- on this BSSID at the HT 135.0 rate. +-- " +-- ::= { wlsxWlanAPRateStatsEntry 75 } +-- +-- wlanAPStatsTotBytesAtHT135Mbps OBJECT-TYPE +-- SYNTAX Counter32 +-- MAX-ACCESS read-only +-- STATUS current +-- DESCRIPTION +-- " +-- This attribute indicates the total number of bytes observed +-- on this BSSID at the HT 135.0 rate. +-- " +-- ::= { wlsxWlanAPRateStatsEntry 76 } +-- +-- wlanAPStatsTotPktsAtHT150Mbps OBJECT-TYPE +-- SYNTAX Counter32 +-- MAX-ACCESS read-only +-- STATUS current +-- DESCRIPTION +-- " +-- This attribute indicates the total number of packets observed +-- on this BSSID at the HT 150.0 rate. +-- " +-- ::= { wlsxWlanAPRateStatsEntry 77 } +-- +-- wlanAPStatsTotBytesAtHT150Mbps OBJECT-TYPE +-- SYNTAX Counter32 +-- MAX-ACCESS read-only +-- STATUS current +-- DESCRIPTION +-- " +-- This attribute indicates the total number of bytes observed +-- on this BSSID at the HT 150.0 rate. +-- " +-- ::= { wlsxWlanAPRateStatsEntry 78 } +-- +-- wlanAPStatsTotPktsAtHT162Mbps OBJECT-TYPE +-- SYNTAX Counter32 +-- MAX-ACCESS read-only +-- STATUS current +-- DESCRIPTION +-- " +-- This attribute indicates the total number of packets observed +-- on this BSSID at the HT 162.0 rate. +-- " +-- ::= { wlsxWlanAPRateStatsEntry 79 } +-- +-- wlanAPStatsTotBytesAtHT162Mbps OBJECT-TYPE +-- SYNTAX Counter32 +-- MAX-ACCESS read-only +-- STATUS current +-- DESCRIPTION +-- " +-- This attribute indicates the total number of bytes observed +-- on this BSSID at the HT 162.0 rate. +-- " +-- ::= { wlsxWlanAPRateStatsEntry 80 } +-- +-- wlanAPStatsTotPktsAtHT180Mbps OBJECT-TYPE +-- SYNTAX Counter32 +-- MAX-ACCESS read-only +-- STATUS current +-- DESCRIPTION +-- " +-- This attribute indicates the total number of packets observed +-- on this BSSID at the HT 180.0 rate. +-- " +-- ::= { wlsxWlanAPRateStatsEntry 81 } +-- +-- wlanAPStatsTotBytesAtHT180Mbps OBJECT-TYPE +-- SYNTAX Counter32 +-- MAX-ACCESS read-only +-- STATUS current +-- DESCRIPTION +-- " +-- This attribute indicates the total number of bytes observed +-- on this BSSID at the HT 180.0 rate. +-- " +-- ::= { wlsxWlanAPRateStatsEntry 82 } +-- +-- wlanAPStatsTotPktsAtHT216Mbps OBJECT-TYPE +-- SYNTAX Counter32 +-- MAX-ACCESS read-only +-- STATUS current +-- DESCRIPTION +-- " +-- This attribute indicates the total number of packets observed +-- on this BSSID at the HT 216.0 rate. +-- " +-- ::= { wlsxWlanAPRateStatsEntry 83 } +-- +-- wlanAPStatsTotBytesAtHT216Mbps OBJECT-TYPE +-- SYNTAX Counter32 +-- MAX-ACCESS read-only +-- STATUS current +-- DESCRIPTION +-- " +-- This attribute indicates the total number of bytes observed +-- on this BSSID at the HT 216.0 rate. +-- " +-- ::= { wlsxWlanAPRateStatsEntry 84 } +-- +-- wlanAPStatsTotPktsAtHT240Mbps OBJECT-TYPE +-- SYNTAX Counter32 +-- MAX-ACCESS read-only +-- STATUS current +-- DESCRIPTION +-- " +-- This attribute indicates the total number of packets observed +-- on this BSSID at the HT 240.0 rate. +-- " +-- ::= { wlsxWlanAPRateStatsEntry 85 } +-- +-- wlanAPStatsTotBytesAtHT240Mbps OBJECT-TYPE +-- SYNTAX Counter32 +-- MAX-ACCESS read-only +-- STATUS current +-- DESCRIPTION +-- " +-- This attribute indicates the total number of bytes observed +-- on this BSSID at the HT 240.0 rate. +-- " +-- ::= { wlsxWlanAPRateStatsEntry 86 } +-- +-- wlanAPStatsTotPktsAtHT243Mbps OBJECT-TYPE +-- SYNTAX Counter32 +-- MAX-ACCESS read-only +-- STATUS current +-- DESCRIPTION +-- " +-- This attribute indicates the total number of packets observed +-- on this BSSID at the HT 243.0 rate. +-- " +-- ::= { wlsxWlanAPRateStatsEntry 87 } +-- +-- wlanAPStatsTotBytesAtHT243Mbps OBJECT-TYPE +-- SYNTAX Counter32 +-- MAX-ACCESS read-only +-- STATUS current +-- DESCRIPTION +-- " +-- This attribute indicates the total number of bytes observed +-- on this BSSID at the HT 243.0 rate. +-- " +-- ::= { wlsxWlanAPRateStatsEntry 88 } +-- +-- wlanAPStatsTotPktsAtHT270Mbps OBJECT-TYPE +-- SYNTAX Counter32 +-- MAX-ACCESS read-only +-- STATUS current +-- DESCRIPTION +-- " +-- This attribute indicates the total number of packets observed +-- on this BSSID at the HT 270.0 rate. +-- " +-- ::= { wlsxWlanAPRateStatsEntry 89 } +-- +-- wlanAPStatsTotBytesAtHT270Mbps OBJECT-TYPE +-- SYNTAX Counter32 +-- MAX-ACCESS read-only +-- STATUS current +-- DESCRIPTION +-- " +-- This attribute indicates the total number of bytes observed +-- on this BSSID at the HT 270.0 rate. +-- " +-- ::= { wlsxWlanAPRateStatsEntry 90 } +-- +-- wlanAPStatsTotPktsAtHT300Mbps OBJECT-TYPE +-- SYNTAX Counter32 +-- MAX-ACCESS read-only +-- STATUS current +-- DESCRIPTION +-- " +-- This attribute indicates the total number of packets observed +-- on this BSSID at the HT 300.0 rate. +-- " +-- ::= { wlsxWlanAPRateStatsEntry 91 } +-- +-- wlanAPStatsTotBytesAtHT300Mbps OBJECT-TYPE +-- SYNTAX Counter32 +-- MAX-ACCESS read-only +-- STATUS current +-- DESCRIPTION +-- " +-- This attribute indicates the total number of bytes observed +-- on this BSSID at the HT 300.0 rate. +-- " +-- ::= { wlsxWlanAPRateStatsEntry 92 } + +-- This table breaks down the BSSID statistics observed based on the +-- Destination Address Types. + + wlsxWlanAPDATypeStatsTable OBJECT-TYPE + SYNTAX SEQUENCE OF WlsxWlanAPDATypeStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " + This table contains all the per BSSID Packet and Byte Counts + but broken down in terms of Destination Address Type. + " + ::= { wlsxWlanAccessPointStatsGroup 3 } + + wlsxWlanAPDATypeStatsEntry OBJECT-TYPE + SYNTAX WlsxWlanAPDATypeStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Destination Address based packet and byte count entry for an AP" + INDEX {wlanAPMacAddress, wlanAPRadioNumber, wlanAPBSSID} + ::= { wlsxWlanAPDATypeStatsTable 1 } + + WlsxWlanAPDATypeStatsEntry ::= + SEQUENCE { + wlanAPStatsTotDABroadcastPkts Counter32 , + wlanAPStatsTotDABroadcastBytes Counter32 , + wlanAPStatsTotDAMulticastPkts Counter32 , + wlanAPStatsTotDAMulticastBytes Counter32 , + wlanAPStatsTotDAUnicastPkts Counter32 , + wlanAPStatsTotDAUnicastBytes Counter32 + + } + + wlanAPStatsTotDABroadcastPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of Broadcast packets + observed on this BSSID. + " + ::= { wlsxWlanAPDATypeStatsEntry 1 } + + wlanAPStatsTotDABroadcastBytes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of Broadcast Bytes + observed on this BSSID. + " + ::= { wlsxWlanAPDATypeStatsEntry 2 } + + wlanAPStatsTotDAMulticastPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of Multicast packets + observed on this BSSID. + " + ::= { wlsxWlanAPDATypeStatsEntry 3 } + + wlanAPStatsTotDAMulticastBytes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of Multicast Bytes + observed on this BSSID. + " + ::= { wlsxWlanAPDATypeStatsEntry 4 } + + wlanAPStatsTotDAUnicastPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of Unicast packets + observed on this BSSID. + " + ::= { wlsxWlanAPDATypeStatsEntry 5 } + + wlanAPStatsTotDAUnicastBytes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of Unicast Bytes + observed on this BSSID. + " + ::= { wlsxWlanAPDATypeStatsEntry 6 } + +-- This table breaks down the BSSID statistics observed based on the +-- the Type of the Packet. + + wlsxWlanAPFrameTypeStatsTable OBJECT-TYPE + SYNTAX SEQUENCE OF WlsxWlanAPFrameTypeStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " + This table contains all the per BSSID Packet and Byte Counts + but broken down into different Frame Types. + " + ::= { wlsxWlanAccessPointStatsGroup 4 } + + wlsxWlanAPFrameTypeStatsEntry OBJECT-TYPE + SYNTAX WlsxWlanAPFrameTypeStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Frame Type based packet and byte count entry for an AP" + INDEX {wlanAPMacAddress, wlanAPRadioNumber, wlanAPBSSID} + ::= { wlsxWlanAPFrameTypeStatsTable 1 } + + WlsxWlanAPFrameTypeStatsEntry ::= + SEQUENCE { + wlanAPStatsTotMgmtPkts Counter32 , + wlanAPStatsTotMgmtBytes Counter32 , + wlanAPStatsTotCtrlPkts Counter32 , + wlanAPStatsTotCtrlBytes Counter32 , + wlanAPStatsTotDataPkts Counter32 , + wlanAPStatsTotDataBytes Counter32 + + } + + wlanAPStatsTotMgmtPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of Management packets + observed on this BSSID. + " + ::= { wlsxWlanAPFrameTypeStatsEntry 1 } + + wlanAPStatsTotMgmtBytes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of Management Bytes + observed on this BSSID. + " + ::= { wlsxWlanAPFrameTypeStatsEntry 2 } + + wlanAPStatsTotCtrlPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of Control packets + observed on this BSSID. + " + ::= { wlsxWlanAPFrameTypeStatsEntry 3 } + + wlanAPStatsTotCtrlBytes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of Control Bytes + observed on this BSSID. + " + ::= { wlsxWlanAPFrameTypeStatsEntry 4 } + + wlanAPStatsTotDataPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of Data packets + observed on this BSSID. + " + ::= { wlsxWlanAPFrameTypeStatsEntry 5 } + + wlanAPStatsTotDataBytes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of Data Bytes + observed on this BSSID. + " + ::= { wlsxWlanAPFrameTypeStatsEntry 6 } + +-- This table breaks down the BSSID statistics observed into packet size +-- buckets. + + wlsxWlanAPPktSizeStatsTable OBJECT-TYPE + SYNTAX SEQUENCE OF WlsxWlanAPPktSizeStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " + This table contains all the per BSSID Packet Count + but broken down into different Packet Sizes. + " + ::= { wlsxWlanAccessPointStatsGroup 5 } + + wlsxWlanAPPktSizeStatsEntry OBJECT-TYPE + SYNTAX WlsxWlanAPPktSizeStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Packet Size based packet count entry for a BSSID" + INDEX {wlanAPMacAddress, wlanAPRadioNumber, wlanAPBSSID} + ::= { wlsxWlanAPPktSizeStatsTable 1 } + + WlsxWlanAPPktSizeStatsEntry ::= + SEQUENCE { + wlanAPStatsPkts63Bytes Counter32 , + wlanAPStatsPkts64To127 Counter32 , + wlanAPStatsPkts128To255 Counter32 , + wlanAPStatsPkts256To511 Counter32 , + wlanAPStatsPkts512To1023 Counter32 , + wlanAPStatsPkts1024To1518 Counter32 + + } + + wlanAPStatsPkts63Bytes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of packets that were + less than 64 bytes long. + " + ::= { wlsxWlanAPPktSizeStatsEntry 1 } + + wlanAPStatsPkts64To127 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of packets that were + between 64 and 127 bytes long. + " + ::= { wlsxWlanAPPktSizeStatsEntry 2 } + + wlanAPStatsPkts128To255 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of packets that were + between 128 and 255 bytes long. + " + ::= { wlsxWlanAPPktSizeStatsEntry 3 } + + wlanAPStatsPkts256To511 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of packets that were + between 256 and 511 bytes long. + " + ::= { wlsxWlanAPPktSizeStatsEntry 4 } + + wlanAPStatsPkts512To1023 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of packets that were + between 512 and 1023 bytes long. + " + ::= { wlsxWlanAPPktSizeStatsEntry 5 } + + wlanAPStatsPkts1024To1518 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of packets that were + between 1024 and 1518 bytes long. + " + ::= { wlsxWlanAPPktSizeStatsEntry 6 } + + +-- AP Chan Stats table + + wlsxWlanAPChStatsTable OBJECT-TYPE + SYNTAX SEQUENCE OF WlanAPChStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " + This Table lists the Channel statistics of all the Access Points + connected to the controller. + " + ::= { wlsxWlanAccessPointStatsGroup 6 } + + wlsxWlanAPChStatsEntry OBJECT-TYPE + SYNTAX WlanAPChStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Access Point Channel Stats entry" + INDEX {wlanAPMacAddress, wlanAPRadioNumber} + ::= { wlsxWlanAPChStatsTable 1 } + + WlanAPChStatsEntry ::= + SEQUENCE { + wlanAPChannelNumber INTEGER, + wlanAPChNumStations Integer32, + wlanAPChTotPkts Counter32, + wlanAPChTotBytes Counter32, + wlanAPChTotRetryPkts Counter32, + wlanAPChTotFragmentedPkts Counter32, + wlanAPChTotPhyErrPkts Counter32, + wlanAPChTotMacErrPkts Counter32, + wlanAPChNoise Integer32, + wlanAPChCoverageIndex Integer32, + wlanAPChInterferenceIndex Integer32, + wlanAPChFrameRetryRate Integer32, + wlanAPChFrameLowSpeedRate Integer32, + wlanAPChFrameNonUnicastRate Integer32, + wlanAPChFrameFragmentationRate Integer32, + wlanAPChFrameBandwidthRate Integer32, + wlanAPChFrameRetryErrorRate Integer32, + wlanAPChBusyRate Integer32, + wlanAPChNumAPs Integer32, + wlanAPChFrameReceiveErrorRate Integer32, + wlanAPChTransmittedFragmentCount Counter32, + wlanAPChMulticastTransmittedFrameCount Counter32, + wlanAPChFailedCount Counter32, + wlanAPChRetryCount Counter32, + wlanAPChMultipleRetryCount Counter32, + wlanAPChFrameDuplicateCount Counter32, + wlanAPChRTSSuccessCount Counter32, + wlanAPChRTSFailureCount Counter32, + wlanAPChACKFailureCount Counter32, + wlanAPChReceivedFragmentCount Counter32, + wlanAPChMulticastReceivedFrameCount Counter32, + wlanAPChFCSErrorCount Counter32, + wlanAPChTransmittedFrameCount Counter32, + wlanAPChWEPUndecryptableCount Counter32, + wlanAPChRxUtilization INTEGER, + wlanAPChTxUtilization INTEGER, + wlanAPChUtilization INTEGER + } + + wlanAPChannelNumber OBJECT-TYPE + SYNTAX INTEGER(1..165) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The channel the AP is currently using. + " + ::= { wlsxWlanAPChStatsEntry 1 } + + wlanAPChNumStations OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of stations using this + channel. + " + ::= { wlsxWlanAPChStatsEntry 2 } + + wlanAPChTotPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total packets observed on this + channel. + " + ::= { wlsxWlanAPChStatsEntry 3 } + + wlanAPChTotBytes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total Bytes observed on this + channel. + " + ::= { wlsxWlanAPChStatsEntry 4 } + + wlanAPChTotRetryPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total Retry Packets observed on this + channel. + " + ::= { wlsxWlanAPChStatsEntry 5 } + + wlanAPChTotFragmentedPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total Fragmented Packets observed on + this channel. + " + ::= { wlsxWlanAPChStatsEntry 6 } + + wlanAPChTotPhyErrPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total Physical Error Packets observed + on this channel. + " + ::= { wlsxWlanAPChStatsEntry 7 } + + wlanAPChTotMacErrPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total Mac errors packets observed on + this channel. + " + ::= { wlsxWlanAPChStatsEntry 8 } + + wlanAPChNoise OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the noise observed on + this channel. + " + ::= { wlsxWlanAPChStatsEntry 9 } + + wlanAPChCoverageIndex OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the coverage provided by the AP on + this channel. + " + ::= { wlsxWlanAPChStatsEntry 10 } + + wlanAPChInterferenceIndex OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the interference + observed on this channel. + " + ::= { wlsxWlanAPChStatsEntry 11 } + + wlanAPChFrameRetryRate OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The number of retry + packets as a percentage of the total packets + transmitted and received on this channel. + " + ::= { wlsxWlanAPChStatsEntry 12 } + + wlanAPChFrameLowSpeedRate OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The number of low data rate (<= 18Mbps for A/G bands and <=2Mbps + for B band) packets as a percentage of the total packets + transmitted and received on this channel + " + ::= { wlsxWlanAPChStatsEntry 13 } + + wlanAPChFrameNonUnicastRate OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The number of broadcast and multicast + packets as a percentage of the total packets + transmitted on this channel. + " + ::= { wlsxWlanAPChStatsEntry 14 } + + wlanAPChFrameFragmentationRate OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The number of fragments + as a percentage of the total packets + transmitted on this channel + " + ::= { wlsxWlanAPChStatsEntry 15 } + + wlanAPChFrameBandwidthRate OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The bandwidth of this channel in Kbps. + " + ::= { wlsxWlanAPChStatsEntry 16 } + + wlanAPChFrameRetryErrorRate OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + " + The number of error packets + as a percentage of the total packets + received on this channel. + " + ::= { wlsxWlanAPChStatsEntry 17 } + + wlanAPChBusyRate OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the busy + this channel is. + " + ::= { wlsxWlanAPChStatsEntry 18 } + + wlanAPChNumAPs OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Access Points + observed on this channel. + " + ::= { wlsxWlanAPChStatsEntry 19 } + + wlanAPChFrameReceiveErrorRate OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The number of error packets + as a percentage of the total packets + received on this channel. + " + ::= { wlsxWlanAPChStatsEntry 20 } + + wlanAPChTransmittedFragmentCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This counter shall be incremented for an acknowledged MPDU + with an individual address in the address 1 field or an MPDU + with a multicast address in the address 1 field of type Data + or Management. + " + ::= { wlsxWlanAPChStatsEntry 21 } + + wlanAPChMulticastTransmittedFrameCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This counter shall increment only when the multicast bit + is set in the destination MAC address of a successfully + transmitted MSDU. When operating as a STA in an ESS, where + these frames are directed to the AP, this implies having + received an acknowledgment to all associated MPDUs. + " + ::= { wlsxWlanAPChStatsEntry 22 } + + wlanAPChFailedCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This counter shall increment when an MSDU is not transmitted + successfully due to the number of transmit attempts exceeding + either the dot11ShortRetryLimit or dot11LongRetryLimit. + " + ::= { wlsxWlanAPChStatsEntry 23 } + + wlanAPChRetryCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This counter shall increment when an MSDU is successfully + transmitted after one or more retransmissions. + " + ::= { wlsxWlanAPChStatsEntry 24 } + + wlanAPChMultipleRetryCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This counter shall increment when an MSDU is successfully + transmitted after more than one retransmission. + " + ::= { wlsxWlanAPChStatsEntry 25 } + + wlanAPChFrameDuplicateCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This counter shall increment when a frame is received + that the Sequence Control field indicates is a + duplicate. + " + ::= { wlsxWlanAPChStatsEntry 26 } + + wlanAPChRTSSuccessCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This counter shall increment when a CTS is received in + response to an RTS. + " + ::= { wlsxWlanAPChStatsEntry 27 } + + wlanAPChRTSFailureCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This counter shall increment when a CTS is not received in + response to an RTS. + " + ::= { wlsxWlanAPChStatsEntry 28 } + + wlanAPChACKFailureCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This counter shall increment when an ACK is not received + when expected. + " + ::= { wlsxWlanAPChStatsEntry 29 } + + wlanAPChReceivedFragmentCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This counter shall be incremented for each successfully + received MPDU of type Data or Management. + " + ::= { wlsxWlanAPChStatsEntry 30 } + + wlanAPChMulticastReceivedFrameCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This counter shall increment when a MSDU is received + with the multicast bit set in the destination + MAC address. + " + ::= { wlsxWlanAPChStatsEntry 31 } + + wlanAPChFCSErrorCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This counter shall increment when an FCS error is + detected in a received MPDU. + " + ::= { wlsxWlanAPChStatsEntry 32 } + + wlanAPChTransmittedFrameCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This counter shall increment for each successfully transmitted + MSDU. + " + ::= { wlsxWlanAPChStatsEntry 33 } + + wlanAPChWEPUndecryptableCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This counter shall increment when a frame is received with the + Protected Frame subfield of the Frame Control field set to one and + the WEPOn value for the key mapped to the transmitter's MAC address + indicates that the frame should not have been encrypted or that frame + is discarded due to the receiving STA not implementing the privacy + option. + " + ::= { wlsxWlanAPChStatsEntry 34 } + + wlanAPChRxUtilization OBJECT-TYPE + SYNTAX INTEGER(0..100) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This is the percentage of time spent by the radio + in receiving packets. + " + ::= { wlsxWlanAPChStatsEntry 35 } + + wlanAPChTxUtilization OBJECT-TYPE + SYNTAX INTEGER(0..100) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This is the percentage of time spent by the radio + in transmitting packets. + " + ::= { wlsxWlanAPChStatsEntry 36 } + + wlanAPChUtilization OBJECT-TYPE + SYNTAX INTEGER(0..100) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This is the percentage of time the channel is busy. + " + ::= { wlsxWlanAPChStatsEntry 37 } + +-- AP Wired Stats table + + wlsxWlanAPWiredStatsTable OBJECT-TYPE + SYNTAX SEQUENCE OF WlanAPWiredStatsEntry + MAX-ACCESS not-accessible + STATUS deprecated + DESCRIPTION + " + This Table lists the Wired statistics of all the Access Points + connected to the controller. + " + ::= { wlsxWlanAccessPointStatsGroup 7 } + + wlsxWlanAPWiredStatsEntry OBJECT-TYPE + SYNTAX WlanAPWiredStatsEntry + MAX-ACCESS not-accessible + STATUS deprecated + DESCRIPTION + "Access Point Wired Stats entry" + INDEX {wlanAPMacAddress} + ::= { wlsxWlanAPWiredStatsTable 1 } + + WlanAPWiredStatsEntry ::= + SEQUENCE { + wlanAPWiredRxPkts Counter32, + wlanAPWiredRxDroppedPkts Counter32, + wlanAPWiredRxBytes Counter32, + wlanAPWiredTxBytes Counter32, + wlanAPWiredRxRate Gauge32, + wlanAPWiredTxRate Gauge32 + } + + wlanAPWiredRxPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + " + This attribute indicates the total packets received from the + AP wired side. + " + ::= { wlsxWlanAPWiredStatsEntry 1 } + + wlanAPWiredRxDroppedPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + " + This attribute indicates the total dropped packets received + from the AP wired side. + " + ::= { wlsxWlanAPWiredStatsEntry 2 } + + wlanAPWiredRxBytes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + " + This attribute indicates the total bytes of correct packets + received from the AP wired side. + " + ::= { wlsxWlanAPWiredStatsEntry 3 } + + wlanAPWiredTxBytes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + " + This attribute indicates the total bytes transmitted from + the AP wired side. + " + ::= { wlsxWlanAPWiredStatsEntry 4 } + + wlanAPWiredRxRate OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + " + This attribute indicates the data rate (kbyte/s) + received from AP wired side in sampling interval. + " + ::= { wlsxWlanAPWiredStatsEntry 5 } + + wlanAPWiredTxRate OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + " + This attribute indicates the data rate (kbyte/s) + transmitted from AP wired side in sampling interval. + " + ::= { wlsxWlanAPWiredStatsEntry 6 } + +-- AP ESSID Stats table + + wlsxWlanAPESSIDStatsTable OBJECT-TYPE + SYNTAX SEQUENCE OF WlanAPESSIDStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " + This Table lists the ESSID statistics of all the Access Points + connected to the controller. + " + ::= { wlsxWlanAccessPointStatsGroup 8 } + + wlsxWlanAPESSIDStatsEntry OBJECT-TYPE + SYNTAX WlanAPESSIDStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Access Point ESSID Stats entry" + INDEX {wlanAPMacAddress, wlanESSID} + ::= { wlsxWlanAPESSIDStatsTable 1 } + + WlanAPESSIDStatsEntry ::= + SEQUENCE { + wlanAPESSIDWirelessRxBytes Counter32, + wlanAPESSIDWirelessTxBytes Counter32, + wlanAPESSIDWiredRxBytes Counter32, + wlanAPESSIDWiredTxBytes Counter32 + } + + wlanAPESSIDWirelessRxBytes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total bytes of correct packets + received from the AP ESSID wireless side. + " + ::= { wlsxWlanAPESSIDStatsEntry 1 } + + wlanAPESSIDWirelessTxBytes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total bytes transmitted + from the AP ESSID wireless side. + " + ::= { wlsxWlanAPESSIDStatsEntry 2 } + + wlanAPESSIDWiredRxBytes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total bytes of correct packets + received from the AP ESSID wired side. + " + ::= { wlsxWlanAPESSIDStatsEntry 3 } + + wlanAPESSIDWiredTxBytes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total bytes transmitted from + the AP ESSID wired side. + " + ::= { wlsxWlanAPESSIDStatsEntry 4 } + +-- AP Radio Stats table + + wlsxWlanAPRadioStatsTable OBJECT-TYPE + SYNTAX SEQUENCE OF WlanAPRadioStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " + This Table lists the Radio statistics of all the Access Points + connected to the controller. + " + ::= { wlsxWlanAccessPointStatsGroup 9 } + + wlsxWlanAPRadioStatsEntry OBJECT-TYPE + SYNTAX WlanAPRadioStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Access Point Radio Stats entry" + INDEX {wlanAPMacAddress, wlanAPRadioNumber} + ::= { wlsxWlanAPRadioStatsTable 1 } + + WlanAPRadioStatsEntry ::= + SEQUENCE { + wlanAPRadioRxPkts Counter32, + wlanAPRadioRxBytes Counter64, + wlanAPRadioTxPkts Counter32, + wlanAPRadioTxBytes Counter64, + wlanAPRadioTxDroppedPkts Counter32, + wlanAPRadioTxErrorPkts Counter32, + wlanAPRadioRxRate Gauge32, + wlanAPRadioTxRate Gauge32, + wlanApRadioAssocReqCount Counter32, + wlanApRadioAssocReqSuccCount Counter32, + wlanApRadioReAssocReqCount Counter32, + wlanApRadioReAssocReqSuccCount Counter32, + wlanAPRadioStationDuration Integer32, + wlanAPRadioAssocSuccPercent Gauge32, + wlanAPRadioTxDataBytes Counter32 + } + + wlanAPRadioRxPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total packets transmitted + from the AP radio wireless side. + " + ::= { wlsxWlanAPRadioStatsEntry 1 } + + wlanAPRadioRxBytes OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total correct bytes + received from the AP radio wireless side. + " + ::= { wlsxWlanAPRadioStatsEntry 2 } + + wlanAPRadioTxPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total packets + transmitted from the AP radio wireless side. + " + ::= { wlsxWlanAPRadioStatsEntry 3 } + + wlanAPRadioTxBytes OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total bytes + transmitted from the AP radio wireless side. + " + ::= { wlsxWlanAPRadioStatsEntry 4 } + + wlanAPRadioTxDroppedPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the dropped packets transmitted + from the AP radio wireless side. + " + ::= { wlsxWlanAPRadioStatsEntry 5 } + + wlanAPRadioTxErrorPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the error packets + transmitted from the AP radio wireless side. + " + ::= { wlsxWlanAPRadioStatsEntry 6 } + + wlanAPRadioRxRate OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the data rate (kbyte/s) + received from AP radio wireless side in sampling interval. + " + ::= { wlsxWlanAPRadioStatsEntry 7 } + + wlanAPRadioTxRate OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the data rate (kbyte/s) + transmitted from AP radio wireless side in sampling interval. + " + ::= { wlsxWlanAPRadioStatsEntry 8 } + + wlanApRadioAssocReqCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This attribute indicates the times of associate request on this + radio." + ::= { wlsxWlanAPRadioStatsEntry 9 } + + wlanApRadioAssocReqSuccCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This attribute indicates the times of successful associate request + on this radio." + ::= { wlsxWlanAPRadioStatsEntry 10 } + + wlanApRadioReAssocReqCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This attribute indicates the times of re-associate request on this + radio." + ::= { wlsxWlanAPRadioStatsEntry 11 } + + wlanApRadioReAssocReqSuccCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This attribute indicates the times of successful re-associate + request on this radio. + " + ::= { wlsxWlanAPRadioStatsEntry 12 } + + wlanAPRadioStationDuration OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total occupied duration, which is + the total duration of user connecting. + " + ::= { wlsxWlanAPRadioStatsEntry 13 } + + wlanAPRadioAssocSuccPercent OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The Association Success Percent. + " + ::= { wlsxWlanAPRadioStatsEntry 14 } + + wlanAPRadioTxDataBytes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total data bytes + transmitted from the AP radio wireless side. + " + ::= { wlsxWlanAPRadioStatsEntry 15 } + +-- AP Wired Port Stats table + + wlsxWlanAPWiredPortStatsTable OBJECT-TYPE + SYNTAX SEQUENCE OF WlanAPWiredPortStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " + This Table lists the Wired statistics of all the Access Points + connected to the controller. + " + ::= { wlsxWlanAccessPointStatsGroup 10 } + + wlsxWlanAPWiredPortStatsEntry OBJECT-TYPE + SYNTAX WlanAPWiredPortStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Access Point Wired Port Stats entry" + INDEX {wlanAPMacAddress, wlanAPPortIndex} + ::= { wlsxWlanAPWiredPortStatsTable 1 } + + WlanAPWiredPortStatsEntry ::= + SEQUENCE { + wlanAPPortIndex Integer32, + wlanAPPortName DisplayString, + wlanAPWiredPortRxPkts Counter32, + wlanAPWiredPortRxDroppedPkts Counter32, + wlanAPWiredPortRxErrors Counter32, + wlanAPWiredPortRxBytes Counter64, + wlanAPWiredPortTxPkts Counter32, + wlanAPWiredPortTxDroppedPkts Counter32, + wlanAPWiredPortTxErrors Counter32, + wlanAPWiredPortTxBytes Counter64, + wlanAPWiredPortRxRate Gauge32, + wlanAPWiredPortTxRate Gauge32, + wlanAPWiredPortSpeed ArubaPortSpeed + } + + wlanAPPortIndex OBJECT-TYPE + SYNTAX Integer32(0..7) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " + AP Wired Port Mac Index (Offset from base Mac Address) + " + ::= { wlsxWlanAPWiredPortStatsEntry 1 } + + wlanAPPortName OBJECT-TYPE + SYNTAX DisplayString(SIZE(0..16)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + AP Wired Port Name + " + ::= { wlsxWlanAPWiredPortStatsEntry 2 } + + wlanAPWiredPortRxPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total packets received from the + AP wired side. + " + ::= { wlsxWlanAPWiredPortStatsEntry 3 } + + wlanAPWiredPortRxDroppedPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total dropped packets received + from the AP wired side. + " + ::= { wlsxWlanAPWiredPortStatsEntry 4 } + + wlanAPWiredPortRxErrors OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of error packets + received from the AP wired side. + " + ::= { wlsxWlanAPWiredPortStatsEntry 5 } + + wlanAPWiredPortRxBytes OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total bytes of correct packets + received from the AP wired side. + " + ::= { wlsxWlanAPWiredPortStatsEntry 6 } + + wlanAPWiredPortTxPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total packets transmitted from the + AP wired side. + " + ::= { wlsxWlanAPWiredPortStatsEntry 7 } + + wlanAPWiredPortTxDroppedPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total dropped packets transmitted + from the AP wired side. + " + ::= { wlsxWlanAPWiredPortStatsEntry 8 } + + wlanAPWiredPortTxErrors OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of error packets + transmitted from the AP wired side. + " + ::= { wlsxWlanAPWiredPortStatsEntry 9 } + + + wlanAPWiredPortTxBytes OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total bytes transmitted from + the AP wired side. + " + ::= { wlsxWlanAPWiredPortStatsEntry 10 } + + wlanAPWiredPortRxRate OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the data rate (kbyte/s) + received from AP wired side in sampling interval. + " + ::= { wlsxWlanAPWiredPortStatsEntry 11 } + + wlanAPWiredPortTxRate OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the data rate (kbyte/s) + transmitted from AP wired side in sampling interval. + " + ::= { wlsxWlanAPWiredPortStatsEntry 12 } + + wlanAPWiredPortSpeed OBJECT-TYPE + SYNTAX ArubaPortSpeed + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the speed of the port + " + ::= { wlsxWlanAPWiredPortStatsEntry 13 } + + +-- wlsxWlanStationStatsGroup contains all the statistics observed by different +-- Air Monitors attached to this controller. +-- Station Statistics are observed by the Air Monitor for that +-- specific Station. + +-- Station Statistics are grouped into Generic, +-- Rate, Destination Address and Frame Type Stats. + +-- Station Statistics Group contains all the statistics related to +-- a Station. + +-- wlsxWlanStationStatsTable will contain all the aggregate statistics collected +-- for a Station + + wlsxWlanStationStatsTable OBJECT-TYPE + SYNTAX SEQUENCE OF WlanStationStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " + This Table lists statistics of all the wireless stations + associated with an AP connected to this controller. + " + ::= { wlsxWlanStationStatsGroup 1} + + wlsxWlanStationStatsEntry OBJECT-TYPE + SYNTAX WlanStationStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Station Stats Entry" + INDEX {wlanStaPhyAddress} + ::= { wlsxWlanStationStatsTable 1 } + + WlanStationStatsEntry ::= + SEQUENCE { + wlanStaChannelNum Unsigned32, + wlanStaTxPkts Counter32, + wlanStaTxBytes Counter32, + wlanStaRxPkts Counter32, + wlanStaRxBytes Counter32, + wlanStaTxBCastPkts Counter32, + wlanStaRxBCastBytes Counter32, + wlanStaTxMCastPkts Counter32, + wlanStaRxMCastBytes Counter32, + wlanStaDataPkts Counter32, + wlanStaCtrlPkts Counter32, + wlanStaNumAssocRequests Counter32, + wlanStaNumAuthRequests Counter32, + wlanStaTxDeauthentications Counter32, + wlanStaRxDeauthentications Counter32, + wlanStaFrameRetryRate Integer32, + wlanStaFrameLowSpeedRate Integer32, + wlanStaFrameNonUnicastRate Integer32, + wlanStaFrameFragmentationRate Integer32, + wlanStaFrameBandwidthRate Integer32, + wlanStaFrameRetryErrorRate Integer32, + wlanStaFrameReceiveErrorRate Integer32, + wlanStaTxBCastBytes Counter32, + wlanStaTxMCastBytes Counter32, + wlanStaTxBytes64 Counter64, + wlanStaRxBytes64 Counter64 + } + + wlanStaChannelNum OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The channel the station is currently using. + " + ::= { wlsxWlanStationStatsEntry 1 } + + wlanStaTxPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The number of packets transmitted by this station. + " + ::= { wlsxWlanStationStatsEntry 2 } + + wlanStaTxBytes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The number of bytes transmitted by this station. + " + ::= { wlsxWlanStationStatsEntry 3 } + + wlanStaRxPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The number of packets received by this station. + " + ::= { wlsxWlanStationStatsEntry 4 } + + wlanStaRxBytes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The number of bytes received by this station. + " + ::= { wlsxWlanStationStatsEntry 5 } + + wlanStaTxBCastPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The number of broadcast packets transmitted by this station. + " + ::= { wlsxWlanStationStatsEntry 6 } + + wlanStaRxBCastBytes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + " + The number of broadcast bytes transmitted by this station. + " + ::= { wlsxWlanStationStatsEntry 7 } + + wlanStaTxMCastPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The number of multicast packets transmitted by this station. + " + ::= { wlsxWlanStationStatsEntry 8 } + + wlanStaRxMCastBytes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + " + The number of multicast bytes transmitted by this station. + " + ::= { wlsxWlanStationStatsEntry 9 } + + wlanStaDataPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The total number of Data packets transmitted by this station. + " + ::= { wlsxWlanStationStatsEntry 10 } + + wlanStaCtrlPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The total number of Control packets transmitted by this station. + " + ::= { wlsxWlanStationStatsEntry 11 } + + wlanStaNumAssocRequests OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The number of Association requests transmitted by this station. + " + ::= { wlsxWlanStationStatsEntry 12 } + + wlanStaNumAuthRequests OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The number of Authentication requests transmitted by this station. + " + ::= { wlsxWlanStationStatsEntry 13 } + + wlanStaTxDeauthentications OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The number of Deauthentication frames transmitted by this station. + " + ::= { wlsxWlanStationStatsEntry 14 } + + wlanStaRxDeauthentications OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The number of Deauthentication frames received by this station. + " + ::= { wlsxWlanStationStatsEntry 15 } + + wlanStaFrameRetryRate OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The number of retry + packets as a percentage of the total packets + transmitted and received by this station. + " + ::= { wlsxWlanStationStatsEntry 16 } + + wlanStaFrameLowSpeedRate OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The number of low data rate (<= 18Mbps for A/G bands and <=2Mbps + for B band) packets as a percentage of the total packets + transmitted and received by this station. + " + ::= { wlsxWlanStationStatsEntry 17 } + + wlanStaFrameNonUnicastRate OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The number of broadcast and multicast + packets as a percentage of the total packets + transmitted by this station. + " + ::= { wlsxWlanStationStatsEntry 18 } + + wlanStaFrameFragmentationRate OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The number of fragments + as a percentage of the total packets + transmitted by this station. + " + ::= { wlsxWlanStationStatsEntry 19 } + + wlanStaFrameBandwidthRate OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The bandwidth of this station in Kbps. + " + ::= { wlsxWlanStationStatsEntry 20 } + + wlanStaFrameRetryErrorRate OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + " + The number of error packets + as a percentage of the total packets + received by this station. + " + ::= { wlsxWlanStationStatsEntry 21 } + + wlanStaFrameReceiveErrorRate OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The number of error packets + as a percentage of the total packets + received by this station. + " + ::= { wlsxWlanStationStatsEntry 22 } + + wlanStaTxBCastBytes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The number of broadcast bytes transmitted by this station. + " + ::= { wlsxWlanStationStatsEntry 23 } + + wlanStaTxMCastBytes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The number of multicast bytes transmitted by this station. + " + ::= { wlsxWlanStationStatsEntry 24 } + + wlanStaTxBytes64 OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The number of bytes transmitted by this station, 64-bit value + " + ::= { wlsxWlanStationStatsEntry 25 } + + wlanStaRxBytes64 OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The number of bytes received by this station, 64-bit value + " + ::= { wlsxWlanStationStatsEntry 26 } + + +-- This table breaks down the Station statistics into different +-- rate categories. + + wlsxWlanStaRateStatsTable OBJECT-TYPE + SYNTAX SEQUENCE OF WlsxWlanStaRateStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " + This table contains all the Packet and Byte Counts for a station + represented in terms of rate categories. + " + ::= { wlsxWlanStationStatsGroup 2} + + wlsxWlanStaRateStatsEntry OBJECT-TYPE + SYNTAX WlsxWlanStaRateStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Data rate based packet and byte count entry for a station" + INDEX {wlanStaPhyAddress} + ::= { wlsxWlanStaRateStatsTable 1 } + + WlsxWlanStaRateStatsEntry ::= + SEQUENCE { + wlanStaTxPktsAt1Mbps Counter32, + wlanStaTxBytesAt1Mbps Counter32, + wlanStaTxPktsAt2Mbps Counter32, + wlanStaTxBytesAt2Mbps Counter32, + wlanStaTxPktsAt5Mbps Counter32, + wlanStaTxBytesAt5Mbps Counter32, + wlanStaTxPktsAt11Mbps Counter32, + wlanStaTxBytesAt11Mbps Counter32, + wlanStaTxPktsAt6Mbps Counter32, + wlanStaTxBytesAt6Mbps Counter32, + wlanStaTxPktsAt12Mbps Counter32, + wlanStaTxBytesAt12Mbps Counter32, + wlanStaTxPktsAt18Mbps Counter32, + wlanStaTxBytesAt18Mbps Counter32, + wlanStaTxPktsAt24Mbps Counter32, + wlanStaTxBytesAt24Mbps Counter32, + wlanStaTxPktsAt36Mbps Counter32, + wlanStaTxBytesAt36Mbps Counter32, + wlanStaTxPktsAt48Mbps Counter32, + wlanStaTxBytesAt48Mbps Counter32, + wlanStaTxPktsAt54Mbps Counter32, + wlanStaTxBytesAt54Mbps Counter32, + wlanStaRxPktsAt1Mbps Counter32, + wlanStaRxBytesAt1Mbps Counter32, + wlanStaRxPktsAt2Mbps Counter32, + wlanStaRxBytesAt2Mbps Counter32, + wlanStaRxPktsAt5Mbps Counter32, + wlanStaRxBytesAt5Mbps Counter32, + wlanStaRxPktsAt11Mbps Counter32, + wlanStaRxBytesAt11Mbps Counter32, + wlanStaRxPktsAt6Mbps Counter32, + wlanStaRxBytesAt6Mbps Counter32, + wlanStaRxPktsAt12Mbps Counter32, + wlanStaRxBytesAt12Mbps Counter32, + wlanStaRxPktsAt18Mbps Counter32, + wlanStaRxBytesAt18Mbps Counter32, + wlanStaRxPktsAt24Mbps Counter32, + wlanStaRxBytesAt24Mbps Counter32, + wlanStaRxPktsAt36Mbps Counter32, + wlanStaRxBytesAt36Mbps Counter32, + wlanStaRxPktsAt48Mbps Counter32, + wlanStaRxBytesAt48Mbps Counter32, + wlanStaRxPktsAt54Mbps Counter32, + wlanStaRxBytesAt54Mbps Counter32, + wlanStaTxPktsAt9Mbps Counter32, + wlanStaTxBytesAt9Mbps Counter32, + wlanStaRxPktsAt9Mbps Counter32, + wlanStaRxBytesAt9Mbps Counter32 + } + + wlanStaTxPktsAt1Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Packets Transmitted by the + station at 1Mbps rate. + " + ::= { wlsxWlanStaRateStatsEntry 1 } + + wlanStaTxBytesAt1Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Octets Transmitted by the + station at 1Mbps rate. + " + ::= { wlsxWlanStaRateStatsEntry 2 } + + wlanStaTxPktsAt2Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Packets Transmitted by the + station at 2Mbps rate. + " + ::= { wlsxWlanStaRateStatsEntry 3 } + + wlanStaTxBytesAt2Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Octets Transmitted by the + station at 2Mbps rate. + " + ::= { wlsxWlanStaRateStatsEntry 4 } + + wlanStaTxPktsAt5Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Packets Transmitted by the + station at 5Mbps rate. + " + ::= { wlsxWlanStaRateStatsEntry 5 } + + wlanStaTxBytesAt5Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Octets Transmitted by the + station at 5Mbps rate. + " + ::= { wlsxWlanStaRateStatsEntry 6 } + + wlanStaTxPktsAt11Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Packets Transmitted by the + station at 11Mbps rate. + " + ::= { wlsxWlanStaRateStatsEntry 7 } + + wlanStaTxBytesAt11Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Octets Transmitted by the + station at 11Mbps rate. + " + ::= { wlsxWlanStaRateStatsEntry 8 } + + wlanStaTxPktsAt6Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Packets Transmitted by the + station at 6Mbps rate. + " + ::= { wlsxWlanStaRateStatsEntry 9 } + + wlanStaTxBytesAt6Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Octets Transmitted by the + station at 6Mbps rate. + " + ::= { wlsxWlanStaRateStatsEntry 10 } + + wlanStaTxPktsAt12Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Packets Transmitted by the + station at 12Mbps rate. + " + ::= { wlsxWlanStaRateStatsEntry 11 } + + wlanStaTxBytesAt12Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Octets Transmitted by the + station at 12Mbps rate. + " + ::= { wlsxWlanStaRateStatsEntry 12 } + + wlanStaTxPktsAt18Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Packets Transmitted by the + station at 18Mbps rate. + " + ::= { wlsxWlanStaRateStatsEntry 13 } + + wlanStaTxBytesAt18Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Octets Transmitted by the + station at 18Mbps rate. + " + ::= { wlsxWlanStaRateStatsEntry 14 } + + wlanStaTxPktsAt24Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Packets Transmitted by the + station at 24Mbps rate. + " + ::= { wlsxWlanStaRateStatsEntry 15 } + + wlanStaTxBytesAt24Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Octets Transmitted by the + station at 24Mbps rate. + " + ::= { wlsxWlanStaRateStatsEntry 16 } + + wlanStaTxPktsAt36Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Packets Transmitted by the + station at 36Mbps rate. + " + ::= { wlsxWlanStaRateStatsEntry 17 } + + wlanStaTxBytesAt36Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Octets Transmitted by the + station at 36Mbps rate. + " + ::= { wlsxWlanStaRateStatsEntry 18 } + + wlanStaTxPktsAt48Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Packets Transmitted by the + station at 48Mbps rate. + " + ::= { wlsxWlanStaRateStatsEntry 19 } + + wlanStaTxBytesAt48Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Octets Transmitted by the + station at 48Mbps rate. + " + ::= { wlsxWlanStaRateStatsEntry 20 } + + wlanStaTxPktsAt54Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Packets Transmitted by the + station at 54Mbps rate. + " + ::= { wlsxWlanStaRateStatsEntry 21 } + + wlanStaTxBytesAt54Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Octets Transmitted by the + station at 54Mbps rate. + " + ::= { wlsxWlanStaRateStatsEntry 22 } + + wlanStaRxPktsAt1Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Packets Received by the + station at 1Mbps rate. + " + ::= { wlsxWlanStaRateStatsEntry 23 } + + wlanStaRxBytesAt1Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Octets Received by the + station at 1Mbps rate. + " + ::= { wlsxWlanStaRateStatsEntry 24 } + + wlanStaRxPktsAt2Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Packets Received by the + station at 2Mbps rate. + " + ::= { wlsxWlanStaRateStatsEntry 25 } + + wlanStaRxBytesAt2Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Octets Received by the + station at 2Mbps rate. + " + ::= { wlsxWlanStaRateStatsEntry 26 } + + wlanStaRxPktsAt5Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Packets Received by the + station at 5Mbps rate. + " + ::= { wlsxWlanStaRateStatsEntry 27 } + + wlanStaRxBytesAt5Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Octets Received by the + station at 5Mbps rate. + " + ::= { wlsxWlanStaRateStatsEntry 28 } + + wlanStaRxPktsAt11Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Packets Received by the + station at 11Mbps rate. + " + ::= { wlsxWlanStaRateStatsEntry 29 } + + wlanStaRxBytesAt11Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Octets Received by the + station at 11Mbps rate. + " + ::= { wlsxWlanStaRateStatsEntry 30 } + + wlanStaRxPktsAt6Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Packets Received by the + station at 6Mbps rate. + " + ::= { wlsxWlanStaRateStatsEntry 31 } + + wlanStaRxBytesAt6Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Octets Received by the + station at 6Mbps rate. + " + ::= { wlsxWlanStaRateStatsEntry 32 } + + wlanStaRxPktsAt12Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Packets Received by the + station at 12Mbps rate. + " + ::= { wlsxWlanStaRateStatsEntry 33 } + + wlanStaRxBytesAt12Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Octets Received by the + station at 12Mbps rate. + " + ::= { wlsxWlanStaRateStatsEntry 34 } + + wlanStaRxPktsAt18Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Packets Received by the + station at 18Mbps rate. + " + ::= { wlsxWlanStaRateStatsEntry 35 } + + wlanStaRxBytesAt18Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Octets Received by the + station at 18Mbps rate. + " + ::= { wlsxWlanStaRateStatsEntry 36 } + + wlanStaRxPktsAt24Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Packets Received by the + station at 24Mbps rate. + " + ::= { wlsxWlanStaRateStatsEntry 37 } + + wlanStaRxBytesAt24Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Octets Received by the + station at 24Mbps rate. + " + ::= { wlsxWlanStaRateStatsEntry 38 } + + wlanStaRxPktsAt36Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Packets Received by the + station at 36Mbps rate. + " + ::= { wlsxWlanStaRateStatsEntry 39 } + + wlanStaRxBytesAt36Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Octets Received by the + station at 36Mbps rate. + " + ::= { wlsxWlanStaRateStatsEntry 40 } + + wlanStaRxPktsAt48Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Packets Received by the + station at 48Mbps rate. + " + ::= { wlsxWlanStaRateStatsEntry 41 } + + wlanStaRxBytesAt48Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Octets Received by the + station at 48Mbps rate. + " + ::= { wlsxWlanStaRateStatsEntry 42 } + + wlanStaRxPktsAt54Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Packets Received by the + station at 54Mbps rate. + " + ::= { wlsxWlanStaRateStatsEntry 43 } + + wlanStaRxBytesAt54Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Octets Received by the + station at 54Mbps rate. + " + ::= { wlsxWlanStaRateStatsEntry 44 } + + wlanStaTxPktsAt9Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Packets Transmitted by the + station at 9Mbps rate. + " + ::= { wlsxWlanStaRateStatsEntry 45 } + + wlanStaTxBytesAt9Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Octets Transmitted by the + station at 9Mbps rate. + " + ::= { wlsxWlanStaRateStatsEntry 46 } + + + wlanStaRxPktsAt9Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Packets Received by the + station at 9Mbps rate. + " + ::= { wlsxWlanStaRateStatsEntry 47 } + + wlanStaRxBytesAt9Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Octets Received by the + station at 9Mbps rate. + " + ::= { wlsxWlanStaRateStatsEntry 48 } + +-- This table breaks down the Station statistics based on the +-- Destination Address Types. + + wlsxWlanStaDATypeStatsTable OBJECT-TYPE + SYNTAX SEQUENCE OF WlsxWlanStaDATypeStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " + This table contains all the Packet and Byte Counts for a station but + but broken down in terms of Destination Address Type. + " + ::= { wlsxWlanStationStatsGroup 3} + + wlsxWlanStaDATypeStatsEntry OBJECT-TYPE + SYNTAX WlsxWlanStaDATypeStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " + Destination Address based packet and byte count entry for a + station + " + INDEX {wlanStaPhyAddress} + ::= { wlsxWlanStaDATypeStatsTable 1 } + + WlsxWlanStaDATypeStatsEntry ::= + SEQUENCE { + wlanStaTxDABroadcastPkts Counter32 , + wlanStaTxDABroadcastBytes Counter32 , + wlanStaTxDAMulticastPkts Counter32 , + wlanStaTxDAMulticastBytes Counter32 , + wlanStaTxDAUnicastPkts Counter32 , + wlanStaTxDAUnicastBytes Counter32 + + } + + wlanStaTxDABroadcastPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Broadcast packets + transmitted by this Station. + " + ::= { wlsxWlanStaDATypeStatsEntry 1 } + + wlanStaTxDABroadcastBytes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Broadcast Bytes + transmitted by this Station. + " + ::= { wlsxWlanStaDATypeStatsEntry 2 } + + wlanStaTxDAMulticastPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Multicast packets + transmitted by this station. + " + ::= { wlsxWlanStaDATypeStatsEntry 3 } + + wlanStaTxDAMulticastBytes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Multicast Bytes + transmitted by this station. + " + ::= { wlsxWlanStaDATypeStatsEntry 4 } + + wlanStaTxDAUnicastPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total of Unicast packets + transmitted by this station. + " + ::= { wlsxWlanStaDATypeStatsEntry 5 } + + wlanStaTxDAUnicastBytes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total of Unicast Bytes + transmitted by this station. + " + ::= { wlsxWlanStaDATypeStatsEntry 6 } + +-- This table breaks down the Station statistics based on the +-- the Type of the Packet. + + wlsxWlanStaFrameTypeStatsTable OBJECT-TYPE + SYNTAX SEQUENCE OF WlsxWlanStaFrameTypeStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " + This table contains all the Packet and Byte Counts for stations + but broken down into different Frame Types. + " + ::= { wlsxWlanStationStatsGroup 4} + + wlsxWlanStaFrameTypeStatsEntry OBJECT-TYPE + SYNTAX WlsxWlanStaFrameTypeStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Frame Type based packet and byte count entry for a station" + INDEX {wlanStaPhyAddress} + ::= { wlsxWlanStaFrameTypeStatsTable 1 } + + WlsxWlanStaFrameTypeStatsEntry ::= + SEQUENCE { + wlanStaTxMgmtPkts Counter32 , + wlanStaTxMgmtBytes Counter32 , + wlanStaTxCtrlPkts Counter32 , + wlanStaTxCtrlBytes Counter32 , + wlanStaTxDataPkts Counter32 , + wlanStaTxDataBytes Counter32 , + wlanStaRxMgmtPkts Counter32 , + wlanStaRxMgmtBytes Counter32 , + wlanStaRxCtrlPkts Counter32 , + wlanStaRxCtrlBytes Counter32 , + wlanStaRxDataPkts Counter32 , + wlanStaRxDataBytes Counter32 + + } + + wlanStaTxMgmtPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the Transmitted Management packets + from a station. + " + ::= { wlsxWlanStaFrameTypeStatsEntry 1 } + + wlanStaTxMgmtBytes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the Transmitted Management Bytes + from a station + " + ::= { wlsxWlanStaFrameTypeStatsEntry 2 } + + wlanStaTxCtrlPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the Transmitted Control packets + from a station + " + ::= { wlsxWlanStaFrameTypeStatsEntry 3 } + + wlanStaTxCtrlBytes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the Transmitted Control Bytes + from a station + " + ::= { wlsxWlanStaFrameTypeStatsEntry 4 } + + wlanStaTxDataPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the Transmitted Data packets + from a station + " + ::= { wlsxWlanStaFrameTypeStatsEntry 5 } + + wlanStaTxDataBytes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the Transmitted Data Bytes + observed on this channel. + " + ::= { wlsxWlanStaFrameTypeStatsEntry 6 } + + wlanStaRxMgmtPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of received Management packets + at a station. + " + ::= { wlsxWlanStaFrameTypeStatsEntry 7 } + + wlanStaRxMgmtBytes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of received Management Bytes + at a station. + " + ::= { wlsxWlanStaFrameTypeStatsEntry 8 } + + wlanStaRxCtrlPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of received Control packets + at a station. + " + ::= { wlsxWlanStaFrameTypeStatsEntry 9 } + + wlanStaRxCtrlBytes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of received Control Bytes + at a station. + " + ::= { wlsxWlanStaFrameTypeStatsEntry 10 } + + wlanStaRxDataPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of received Data packets + at a station. + " + ::= { wlsxWlanStaFrameTypeStatsEntry 11 } + + wlanStaRxDataBytes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of received Data Bytes + at a station. + " + ::= { wlsxWlanStaFrameTypeStatsEntry 12 } + + +-- This table breaks down the Station statistics received or transmitted by a +-- station into packet size buckets. + + wlsxWlanStaPktSizeStatsTable OBJECT-TYPE + SYNTAX SEQUENCE OF WlsxWlanStaPktSizeStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " + This table contains all the Packet and Byte Counts for stations + but broken down into different Packet Sizes. + " + ::= { wlsxWlanStationStatsGroup 5} + + wlsxWlanStaPktSizeStatsEntry OBJECT-TYPE + SYNTAX WlsxWlanStaPktSizeStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Packet Size based packet count entry for a station" + INDEX {wlanStaPhyAddress} + ::= { wlsxWlanStaPktSizeStatsTable 1 } + + WlsxWlanStaPktSizeStatsEntry ::= + SEQUENCE { + wlanStaTxPkts63Bytes Counter32 , + wlanStaTxPkts64To127 Counter32 , + wlanStaTxPkts128To255 Counter32 , + wlanStaTxPkts256To511 Counter32 , + wlanStaTxPkts512To1023 Counter32 , + wlanStaTxPkts1024To1518 Counter32 , + wlanStaRxPkts63Bytes Counter32 , + wlanStaRxPkts64To127 Counter32 , + wlanStaRxPkts128To255 Counter32 , + wlanStaRxPkts256To511 Counter32 , + wlanStaRxPkts512To1023 Counter32 , + wlanStaRxPkts1024To1518 Counter32 + + } + + wlanStaTxPkts63Bytes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of packets transmitted by the + station that were less than 64 bytes long. + " + ::= { wlsxWlanStaPktSizeStatsEntry 1 } + + wlanStaTxPkts64To127 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of packets transmitted by the + station that were between 64 and 127 bytes long. + " + ::= { wlsxWlanStaPktSizeStatsEntry 2 } + + wlanStaTxPkts128To255 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of packets transmitted by the + station that were between 128 and 255 bytes long. + " + ::= { wlsxWlanStaPktSizeStatsEntry 3 } + + wlanStaTxPkts256To511 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of packets transmitted by the + station that were between 256 and 511 bytes long. + " + ::= { wlsxWlanStaPktSizeStatsEntry 4 } + + wlanStaTxPkts512To1023 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of packets transmitted by the + station that were between 512 and 1023 bytes long. + " + ::= { wlsxWlanStaPktSizeStatsEntry 5 } + + wlanStaTxPkts1024To1518 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of packets transmitted by the + station that were between 1024 and 1518 bytes long. + " + ::= { wlsxWlanStaPktSizeStatsEntry 6 } + + wlanStaRxPkts63Bytes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of packets Received by the + station that were less than 64 bytes long. + " + ::= { wlsxWlanStaPktSizeStatsEntry 7 } + + wlanStaRxPkts64To127 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of packets Received by the + station that were between 64 and 127 bytes long. + " + ::= { wlsxWlanStaPktSizeStatsEntry 8 } + + wlanStaRxPkts128To255 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of packets Received by the + station that were between 128 and 255 bytes long. + " + ::= { wlsxWlanStaPktSizeStatsEntry 9 } + + wlanStaRxPkts256To511 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of packets Received by the + station that were between 256 and 511 bytes long. + " + ::= { wlsxWlanStaPktSizeStatsEntry 10 } + + wlanStaRxPkts512To1023 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of packets Received by the + station that were between 512 and 1023 bytes long. + " + ::= { wlsxWlanStaPktSizeStatsEntry 11 } + + wlanStaRxPkts1024To1518 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of packets Received by the + station that were between 1024 and 1518 bytes long. + " + ::= { wlsxWlanStaPktSizeStatsEntry 12 } + +-- wlsxWlanSwitchStatsGroup contains all statistics related to +-- the whole network controlled by the controller. + +-- wlsxWlanESSIDStatsTable contains all statistics collected +-- for an ESSID on the switch + + wlsxWlanESSIDStatsTable OBJECT-TYPE + SYNTAX SEQUENCE OF WlanESSIDStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " + This Table lists statistics of the ESSID + controlled by this controller. + " + ::= { wlsxWlanSwitchStatsGroup 1} + + wlsxWlanESSIDStatsEntry OBJECT-TYPE + SYNTAX WlanESSIDStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "ESSID Stats Entry" + INDEX {wlanESSID} + ::= { wlsxWlanESSIDStatsTable 1 } + + WlanESSIDStatsEntry ::= + SEQUENCE { + wlanESSIDRxPkts Counter32, + wlanESSIDRxDroppedPkts Counter32, + wlanESSIDRxRetryPkts Counter32, + wlanESSIDTxPkts Counter32, + wlanESSIDTxDroppedPkts Counter32, + wlanESSIDTxRetryPkts Counter32, + wlanESSIDTxErrorPkts Counter32, + wlanESSIDRxRate Gauge32, + wlanESSIDTxRate Gauge32, + wlanESSIDWiredRxPkts Counter32, + wlanESSIDWiredRxBytes Counter32, + wlanESSIDWiredTxBytes Counter32 + } + + wlanESSIDRxPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The total number of packets on the ESSID uplink channel + of wireless side. + " + ::= { wlsxWlanESSIDStatsEntry 1 } + + wlanESSIDRxDroppedPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The total number of dropped packets on the ESSID uplink + channel of wireless side. + " + ::= { wlsxWlanESSIDStatsEntry 2 } + + wlanESSIDRxRetryPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The total number of re-transmission packets on the ESSID + uplink channel of wireless side. + " + ::= { wlsxWlanESSIDStatsEntry 3 } + + wlanESSIDTxPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The total number of packets on the ESSID downlink channel + of wireless side. + " + ::= { wlsxWlanESSIDStatsEntry 4 } + + wlanESSIDTxDroppedPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The total number of dropped packets on the ESSID downlink + channel of wireless side. + " + ::= { wlsxWlanESSIDStatsEntry 5 } + + wlanESSIDTxRetryPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The total number of re-transmission packets on the ESSID + downlink channel of wireless side. + " + ::= { wlsxWlanESSIDStatsEntry 6 } + + wlanESSIDTxErrorPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The total number of error packets on the ESSID downlink + channel of wireless side. + " + ::= { wlsxWlanESSIDStatsEntry 7 } + + wlanESSIDRxRate OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The data rate received from the ESSID in sampling interval, + unit is kbyte/s. + " + ::= { wlsxWlanESSIDStatsEntry 8 } + + wlanESSIDTxRate OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The data rate transmitted from the ESSID in sampling interval, + unit is kbyte/s. + " + ::= { wlsxWlanESSIDStatsEntry 9 } + + wlanESSIDWiredRxPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The total number of packets on the ESSID uplink + channel of wired side. + " + ::= { wlsxWlanESSIDStatsEntry 10 } + + wlanESSIDWiredRxBytes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The total number of bytes on the ESSID uplink + channel of wireless side. + " + ::= { wlsxWlanESSIDStatsEntry 11 } + + wlanESSIDWiredTxBytes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The total number of bytes on the ESSID downlink + channel of wireless side. + " + ::= { wlsxWlanESSIDStatsEntry 12 } + +-- wlsxWlanEthStatsTable will contain all the statistics collected +-- for all ethernet ports + + wlsxWlanEthStatsTable OBJECT-TYPE + SYNTAX SEQUENCE OF WlanEthStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " + This Table lists statistics of all ethernet ports + of this controller. + " + ::= { wlsxWlanSwitchStatsGroup 2} + + wlsxWlanEthStatsEntry OBJECT-TYPE + SYNTAX WlanEthStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Ethernet Port Stats Entry" + INDEX {ifIndex} + ::= { wlsxWlanEthStatsTable 1 } + + WlanEthStatsEntry ::= + SEQUENCE { + wlanEthRxRate Gauge32, + wlanEthTxRate Gauge32 + } + + wlanEthRxRate OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The data rate received from the ethernet port in sampling interval, + unit is kbyte/s. + " + ::= { wlsxWlanEthStatsEntry 1 } + + wlanEthTxRate OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The data rate transmitted from the ethernet port in sampling interval, + unit is kbyte/s. + " + ::= { wlsxWlanEthStatsEntry 2 } + +-- wlsxSSIDConfigGroup contains all configuration related to +-- the SSID controlled by the controller. + +-- wlsxSSIDConfigTable contains the global configuration of the SSID + + wlsxSSIDConfigTable OBJECT-TYPE + SYNTAX SEQUENCE OF WlanSSIDConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " + This Table lists the configuration of the SSID. + Note: Currently, this table doesn't return any data. + " + ::= { wlsxSSIDConfigGroup 1} + + wlsxSSIDConfigEntry OBJECT-TYPE + SYNTAX WlanSSIDConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "AP Configuration Entry" + INDEX {wlanAPMacAddress, wlanAPRadioNumber, wlanESSID, wlanESSIDIndex} + ::= { wlsxSSIDConfigTable 1 } + + WlanSSIDConfigEntry ::= + SEQUENCE { + wlanESSIDIndex Integer32, + wlanSSIDConfigHideSSID TruthValue, + wlanSSIDConfigNumStaAllowed Unsigned32, + wlanSSIDConfigWmmBeDscp Unsigned32, + wlanSSIDConfigWmmBkDscp Unsigned32, + wlanSSIDConfigWmmViDscp Unsigned32, + wlanSSIDConfigWmmVoDscp Unsigned32 + } + + wlanESSIDIndex OBJECT-TYPE + SYNTAX Integer32(1..16) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " + This attribute indicates the index of ESSID. We support up to 16 ESSIDs. + " + ::= { wlsxSSIDConfigEntry 1 } + + wlanSSIDConfigHideSSID OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates if SSID is hidden or not. + " + ::= { wlsxSSIDConfigEntry 2 } + + wlanSSIDConfigNumStaAllowed OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the maximum number of stations that are allowed to access into the network. + " + ::= { wlsxSSIDConfigEntry 3 } + + wlanSSIDConfigWmmBeDscp OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the QoS priority of best-effort service. + " + ::= { wlsxSSIDConfigEntry 4 } + + wlanSSIDConfigWmmBkDscp OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the QoS priority of background service. + " + ::= { wlsxSSIDConfigEntry 5 } + + wlanSSIDConfigWmmViDscp OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the QoS priority of video service. + " + ::= { wlsxSSIDConfigEntry 6 } + + wlanSSIDConfigWmmVoDscp OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the QoS priority of voice service. + " + ::= { wlsxSSIDConfigEntry 7 } + +-- wlsxAPConfigGroup contains all configuration related to +-- the APs controlled by the controller. + +-- wlsxAPConfigTable contains the global configuration of the AP + + wlsxAPConfigTable OBJECT-TYPE + SYNTAX SEQUENCE OF WlanAPConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " + This Table lists the configuration of the Access Point. + " + ::= { wlsxAPConfigGroup 1} + + wlsxAPConfigEntry OBJECT-TYPE + SYNTAX WlanAPConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "AP Configuration Entry" + INDEX {wlanAPMacAddress} + ::= { wlsxAPConfigTable 1 } + + WlanAPConfigEntry ::= + SEQUENCE { + wlanAPConfigNetmask IpAddress, + wlanAPConfigGateway IpAddress + } + + wlanAPConfigNetmask OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The netmask of AP IP Address. + " + ::= { wlsxAPConfigEntry 1 } + + wlanAPConfigGateway OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The gateway of the AP. + " + ::= { wlsxAPConfigEntry 2 } + + --Trap Definition + wlsxRAPActiveUplink NOTIFICATION-TYPE + OBJECTS {wlanAPActiveUplink, wlanAPMacAddress} + STATUS current + DESCRIPTION + "A trap which indicates the RAP Active Uplink" + ::= { wlsxRAPTraps 1 } +END |