Initial commitHEADmain

1 files changed, 1689 insertions, 0 deletions

diff --git a/MIBS/adva/F3-SYNC-MIB b/MIBS/adva/F3-SYNC-MIB
new file mode 100644
index 0000000..15d1e3e
--- /dev/null
+++ b/MIBS/adva/F3-SYNC-MIB
@@ -0,0 +1,1689 @@
+F3-SYNC-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-COMPLIANCE, OBJECT-GROUP
+             FROM SNMPv2-CONF
+    MODULE-IDENTITY, OBJECT-TYPE, IpAddress, Integer32, Unsigned32
+             FROM SNMPv2-SMI                                           
+    DisplayString, TruthValue, RowStatus, StorageType, VariablePointer,DateAndTime,
+    TEXTUAL-CONVENTION
+             FROM SNMPv2-TC
+    neIndex, shelfIndex, slotIndex
+             FROM  CM-ENTITY-MIB
+    fsp150cm
+             FROM  ADVA-MIB
+    AdminState, OperationalState, SecondaryState, F3DisplayString, RestartType
+             FROM  CM-COMMON-MIB
+    CmGenPgSwitchoverReason
+             FROM  CM-REDUNDANCY-MIB;
+
+f3SyncMIB MODULE-IDENTITY
+    LAST-UPDATED    "202001150000Z"
+    ORGANIZATION    "ADVA Optical Networking SE"
+    CONTACT-INFO
+        "Web URL: http://adva.com/
+        E-mail:  support@adva.com
+        Postal:  ADVA Optical Networking SE
+             Campus Martinsried
+             Fraunhoferstrasse 9a
+             82152 Martinsried/Munich
+             Germany
+        Phone: +49 089 89 06 65 0
+        Fax:  +49 089 89 06 65 199 "
+    DESCRIPTION    "
+
+        Notes from release 202001150000Z
+          (1) Added f3TimeClockPhaseAdjust
+
+        Notes from release 201909110000Z,
+          (1) New textual conventions: 
+                ClkSignalType
+	
+        Notes from release 201907080000Z,
+           (1) Added f3TimeClockAtoiCurrentOffset, f3TimeClockAtoiJumpSeconds, 
+                     f3TimeClockAtoiTimeOfNextJump, f3TimeClockAtoiDisplayName
+
+        Notes from release 201901230000Z,
+          (1) Added table indices: 
+                f3SyncProtGroupIndex in f3SyncProtMemberEntry, 
+                f3TimeClockProtGroupIndex in f3TimeClockProtMemberEntry 
+          
+        Notes from release 201807300000Z,
+          (1) New tables: 
+                f3SyncProtGroupTable, f3SyncProtMemberTable, 
+                f3TimeClockProtGroupTable, f3TimeClockProtMemberTable 
+        
+    Notes from release 201901070000Z
+          (1) Added f3TimeClockTimeHoldoverTimeout
+          (2) Added f3TimeClockTimeInHoldover
+
+
+      
+        Notes from release 201802210000Z,
+          (1) Added table: f3PrcTable
+          (2) New textual conventions: 
+                SsmMode and AcknowledgeType
+        
+        Notes from release 201304240000Z,
+          (1) New tables: f3TimeClockTable, f3TimeClockRefTable
+        
+        Notes from release 201003250000Z,
+          (1)f3SyncTable has new objects
+               f3SyncSelectionMode,
+               f3SyncWaitToRestoreTime, f3SyncOperationSyncRef,
+               f3SyncOperationType,
+          (2)f3SyncRefTable has new object
+               f3SyncRefOperationType
+        
+        Notes from release 201002120000Z,
+          (1)f3SyncTable has new objects f3SyncAlias, f3SyncDomain
+          (2)f3SyncRefTable has new objects
+               f3SyncRefAlias, f3SyncRefEffectiveQL
+        
+        Notes from release 200903190000Z,
+          (1)MIB version ready for release of FSP150CC devices GE101 and GE206."
+    ::= {fsp150cm 12}
+
+-- 
+-- OID definitions
+-- 
+f3SyncObjects                   OBJECT IDENTIFIER ::= {f3SyncMIB 1}
+f3SyncConformance               OBJECT IDENTIFIER ::= {f3SyncMIB 2}
+
+-- 
+-- Textual Conventions 
+-- 
+NetworkClockType ::= TEXTUAL-CONVENTION
+    STATUS         current
+    DESCRIPTION    "Enumerations for Network Clock Type.
+        option1 - represents an SDH regional clock type,
+        option2 - represents a SONET regional clock type."
+    SYNTAX INTEGER    {
+        option1 (1),
+        option2 (2)
+        }
+
+ClockMode ::= TEXTUAL-CONVENTION
+    STATUS         current
+    DESCRIPTION    "Enumerations for Clock Mode.
+        freerun    - Free Run,
+        holdover   - Hold over,
+        tracking   - Tracking,
+        lossoflock - Loss of Lock,
+        locked     - Locked,
+        bypass     - the frequency entity is not functioning and is being bypassed. One of its frequency inputs is externally selected to be used directly as the frequency output."
+    SYNTAX INTEGER    {
+        notAvailable(0),
+        freerun (1),
+        holdover (2),
+        tracking (3),
+        lossoflock (4),
+        locked (5),
+        bypass(6)
+        }
+
+SSMQualityLevel ::= TEXTUAL-CONVENTION
+    STATUS         current
+    DESCRIPTION    "Enumerations for Sync Status Messages Quality Level"
+    SYNTAX INTEGER    {
+        not-applicable(0),
+        ql-dnu (1),
+        ql-eec1 (2),
+        ql-eec2 (3),
+        ql-inv (4),
+        ql-inv0 (5),
+        ql-inv1 (6),
+        ql-inv2 (7),
+        ql-inv3 (8),
+        ql-inv5 (9),
+        ql-inv7 (10),
+        ql-inv8 (11),
+        ql-inv9 (12),
+        ql-inv10 (13),
+        ql-inv11 (14),
+        ql-inv12 (15),
+        ql-none (16),
+        ql-nsupp (17),
+        ql-prc (18),
+        ql-prov (19),
+        ql-prs (20),
+        ql-smc (21),
+        ql-ssu-a (22),
+        ql-ssu-b (23),
+        ql-st2 (24),
+        ql-st3e (25),
+        ql-stu (26),
+        ql-tnc (27),
+        ql-unc (28),
+        --
+        ql-failed(29),
+        ql-inv6(30),
+        ql-inv13(31),
+        ql-inv14(32),
+        ql-dus (33),
+        ql-na (34)
+        
+        }
+
+SyncRefStatus ::= TEXTUAL-CONVENTION
+    STATUS         current
+    DESCRIPTION    "Enumerations for Sync Reference status,
+        ref-ok,
+        ref-failed."
+    SYNTAX INTEGER    {
+        not-applicable(0),
+        ref-ok(1),
+        ref-failed(2),
+        ref-freq-ok(3)
+        }
+
+SyncRefState ::= TEXTUAL-CONVENTION
+    STATUS         current
+    DESCRIPTION    "Enumerations for Sync Reference state,
+        active,
+        standby,
+        unavailable."
+    SYNTAX INTEGER    {
+        not-applicable(0),
+        active(1),
+        standby(2),
+        unavailable(3),
+        lockedout(4)
+        }
+
+SyncDomainType ::= TEXTUAL-CONVENTION
+    STATUS         current
+    DESCRIPTION    "Enumerations for Sync Domain type,
+        chassis,
+        linecard."
+    SYNTAX INTEGER    {
+        chassis(1), -- applicable to Hub Shelf/Line Cards sync entities
+        linecard(2) -- applicable for NIDs and Line Cards
+        }
+
+SyncOperationType ::= TEXTUAL-CONVENTION
+    STATUS         current
+    DESCRIPTION    "Enumerations for Sync Operation Type,
+        none         - No action,
+        forcedswitch - can be used to override the currently selected reference, assuming
+        the the chosen reference is not locked out.  A forced switch
+        overrides a manual switch and subsequent forced switch preempts
+        a previous forced switch.  A forced switch request to a reference
+        which is in SF state or has a QL of DL-DNU when QL mode=Enabled
+        will result in the clock selector entering holdover.
+        manualswitch - can be used to switch to a reference, overriding the currently
+        selected reference assuming a forced switch is not active
+        on a reference other than chosen reference; it is not locked out,
+        not in SF state, has a QL not QL-DNU and has the highest
+        available QL. A manual switch request can only be used to
+        override the assigned reference priorities.
+        A manual switch request overrides a previous manual switch.
+        lockout      - sets the state of reference to locked-out, it is no longer
+        considered available by the selection process,
+        clearwtr     - causes any active Wait to Restore timer for the reference,
+        clearlockout - causes the reference to be considered available again by
+        the selection process,
+        clearswitch."
+    SYNTAX INTEGER    {
+        none(1),
+        forcedswitch(2),
+        manualswitch(3),
+        lockout(4),
+        clearwtr(5),
+        clearlockout(6),
+        clearswitch(7)
+        }
+
+SyncSelectionMode ::= TEXTUAL-CONVENTION
+    STATUS         current
+    DESCRIPTION    "Enumerations for Sync Selection Mode,
+        ql-mode,
+        priority-mode."
+    SYNTAX INTEGER    {
+        ql-mode(1),
+        priority-mode(2)
+        }
+
+TimeScale ::= TEXTUAL-CONVENTION
+    STATUS         current
+    DESCRIPTION    "Enumerations for Time Scale,
+        ptp,
+        arb."
+    SYNTAX INTEGER    {
+    ptp(1),
+        arb(2)
+        }
+
+TODSource ::= TEXTUAL-CONVENTION
+    STATUS         current
+    DESCRIPTION    "Enumerations for ARB ToD Source,
+        na,
+    system-tod,
+        manual."
+    SYNTAX INTEGER    {
+    na(1),
+        system-tod(2),
+    manual(3)
+        }
+
+SquelchControl ::= TEXTUAL-CONVENTION
+    STATUS         current
+    DESCRIPTION    "Describes the Squelch Control of the PTP ports."
+    SYNTAX INTEGER    {
+        never(1),
+        holdover (2),
+        lock (3),
+        squelch-ql(4)
+        }
+
+TimeClockMode ::= TEXTUAL-CONVENTION
+    STATUS         current
+    DESCRIPTION    "Enumerations for Time Clock Mode.
+        freerun    - Free Run,
+        warmup     - Warm Up,
+        tracking   - Tracking,
+        transition - Transition,
+        holdover   - Holdover,
+        locked     - Locked."
+    SYNTAX INTEGER    {
+        freerun (1),
+        warmup (2),
+        tracking (3),
+        transition (4),
+        holdover (5),
+        locked (6)
+        }
+
+TimeTraceAbilityStatus ::= TEXTUAL-CONVENTION
+    STATUS         current
+    DESCRIPTION    "Describes the time trace ability status."
+    SYNTAX INTEGER    {
+        notTraceAble (1),
+        timeLocked (2),
+        timeFreqLock (3),
+        timeHoldover (4)
+        }
+
+HoldoverAccuracy ::= TEXTUAL-CONVENTION
+    STATUS         current
+    DESCRIPTION    ""
+    SYNTAX INTEGER    {
+        time-500ns(1),
+        time-1000ns(2),
+        time-1500ns(3),
+        time-5000ns(4),
+        time-10000ns(5)
+        }
+
+TimeHoldoverPerformance ::= TEXTUAL-CONVENTION
+    STATUS         current
+    DESCRIPTION    ""
+    SYNTAX INTEGER    {
+        time-500ns(1),
+        time-1000ns(2),
+        time-1500ns(3),
+        time-5000ns(4),
+        time-10000ns(5),
+        time-0ns(6),
+        time-100ns(7),
+        na(8)
+        }
+
+TimeSource ::= TEXTUAL-CONVENTION
+    STATUS         current
+    DESCRIPTION    "Enumerations for Time Source,
+        atomic, gps, ptp,
+        internal, other."
+    SYNTAX INTEGER    {
+        atomic(1),
+        gps(2),
+        ptp(3),
+        internal(4),
+        other(5)
+        }
+
+PLLBw ::= TEXTUAL-CONVENTION
+    STATUS         current
+    DESCRIPTION    "Enumerations for Clock PLL Bandwidth,
+        eec,
+        ssu."
+    SYNTAX INTEGER    {
+        eec(1),
+        ssu(2)
+        }
+
+SsmMode ::= TEXTUAL-CONVENTION
+    STATUS         current
+    DESCRIPTION    "Enumerations for SSM Mode,
+        enabled or disabled."
+    SYNTAX INTEGER    {
+        enabled(1),
+        disbled(2)
+        }
+
+AcknowledgeType ::= TEXTUAL-CONVENTION
+    STATUS         current
+    DESCRIPTION    "Enumerations for Acknowledgement Type."
+    SYNTAX INTEGER    {
+        no-action(1),
+        accuracy-adjust(2)
+        }
+
+ClkSignalType ::= TEXTUAL-CONVENTION
+    STATUS         current
+    DESCRIPTION    "Enumerations for Clk Signal Type,
+        10mhz,
+        2048khz."
+    SYNTAX INTEGER    {
+        not-applicable(0),
+        freq-10mhz(1),
+        freq-2048khz(2)
+        }
+--
+-- Sync Table 
+--
+f3SyncTable OBJECT-TYPE
+    SYNTAX         SEQUENCE OF F3SyncEntry
+    MAX-ACCESS     not-accessible
+    STATUS         current
+    DESCRIPTION    "A list of entries corresponding to the Sync entities."
+    ::= { f3SyncObjects 1 }
+
+f3SyncEntry OBJECT-TYPE
+    SYNTAX         F3SyncEntry
+    MAX-ACCESS     not-accessible
+    STATUS         current
+    DESCRIPTION    "An entry containing information applicable to a particular
+        Sync Entity."
+    INDEX    { neIndex, shelfIndex, slotIndex, f3SyncIndex }
+    ::= { f3SyncTable 1 }
+
+F3SyncEntry  ::=  SEQUENCE    {
+        f3SyncIndex               Integer32,
+        
+        f3SyncAdminState          AdminState,
+        f3SyncOperationalState    OperationalState,
+        f3SyncSecondaryState      SecondaryState,
+        
+        f3SyncNetworkClockType    NetworkClockType,
+        f3SyncSelectedReference   VariablePointer,
+        f3SyncClockMode           ClockMode,
+        f3SyncQL                  SSMQualityLevel,
+        
+        -- new columns added for R4.3CC
+        f3SyncAlias               DisplayString,
+        f3SyncDomain              SyncDomainType,
+        f3SyncSelectionMode       SyncSelectionMode,
+        f3SyncWaitToRestoreTime   Integer32,
+        f3SyncOperationSyncRef    VariablePointer,
+        f3SyncOperationType       SyncOperationType,
+        f3SyncPLLBw               PLLBw
+        }
+
+f3SyncIndex OBJECT-TYPE
+    SYNTAX         Integer32
+    MAX-ACCESS     read-only
+    STATUS         current
+    DESCRIPTION    "Unique index value associated with the Synchronization Entity."
+    ::= { f3SyncEntry 1 }
+
+f3SyncAdminState OBJECT-TYPE
+    SYNTAX         AdminState
+    MAX-ACCESS     read-write
+    STATUS         current
+    DESCRIPTION    "This object represents the Administrative State of the Sync
+        Entity."
+    ::= { f3SyncEntry 2 }
+
+f3SyncOperationalState OBJECT-TYPE
+    SYNTAX         OperationalState
+    MAX-ACCESS     read-only
+    STATUS         current
+    DESCRIPTION    "This object represents the Operational State of the Sync
+        Entity."
+    ::= { f3SyncEntry 3 }
+
+f3SyncSecondaryState OBJECT-TYPE
+    SYNTAX         SecondaryState
+    MAX-ACCESS     read-only
+    STATUS         current
+    DESCRIPTION    "This object represents the Secondary State of the Sync
+        Entity."
+    ::= { f3SyncEntry 4 }
+
+f3SyncNetworkClockType OBJECT-TYPE
+    SYNTAX         NetworkClockType
+    MAX-ACCESS     read-write
+    STATUS         current
+    DESCRIPTION    "This object represents the regional clock type for
+        the system.  This object determines which QL codes are
+        supported."
+    ::= { f3SyncEntry 5 }
+
+f3SyncSelectedReference OBJECT-TYPE
+    SYNTAX         VariablePointer
+    MAX-ACCESS     read-only
+    STATUS         current
+    DESCRIPTION    "This object provides the source of the currently selected
+        Sync reference. This would be the OID of the actual entity (bits port,
+        traffic port etc.).
+        An OID value of {0 0} represents internal clock."
+    ::= { f3SyncEntry 6 }
+
+f3SyncClockMode OBJECT-TYPE
+    SYNTAX         ClockMode
+    MAX-ACCESS     read-only
+    STATUS         current
+    DESCRIPTION    "This object provides the system clock mode."
+    ::= { f3SyncEntry 7 }
+
+f3SyncQL OBJECT-TYPE
+    SYNTAX         SSMQualityLevel
+    MAX-ACCESS     read-only
+    STATUS         current
+    DESCRIPTION    "This object provides the QL of the system reference.
+        This is the value for each external reference's Transmit 
+        QL attribute unless it should be transmitting QL-DNU."
+    ::= { f3SyncEntry 8 }
+
+f3SyncAlias OBJECT-TYPE
+    SYNTAX         DisplayString (SIZE(0..256))
+    MAX-ACCESS     read-create
+    STATUS         current
+    DESCRIPTION    "This object allows SNMP management entities to provide an
+        alias to the Sync entity."
+    ::= { f3SyncEntry 9 }
+
+f3SyncDomain OBJECT-TYPE
+    SYNTAX         SyncDomainType
+    MAX-ACCESS     read-write
+    STATUS         current
+    DESCRIPTION    "This object represents the Sync entity's domain type. A Sync entity can be in
+        chassis (system) domain (applicable for HUB shelf and Aggregation shelf)
+        or  line card domain (applicable for HUB shelf, Aggregation shelf as well as
+        NIDs)."
+    ::= { f3SyncEntry 10 }
+
+f3SyncSelectionMode OBJECT-TYPE
+    SYNTAX         SyncSelectionMode
+    MAX-ACCESS     read-write
+    STATUS         current
+    DESCRIPTION    "This object represents the Sync entity's selection mode.
+        If this mode is configured as ql-mode, the selection of
+        which reference should be used shall be based upon the
+        reference's Quality Level.  The highest received
+        Quality Level shall be the selected reference.  The priority
+        shall only be used to distinguish between references with the
+        same received QL.  When multiple references have the same QL
+        and same priority, the behavior of selection process within
+        the group is non-revertive.
+        If this mode is configued as priority-mode, the selection
+        of which reference should be used shall be based upon
+        the reference's priority (i.e. QL is disabled).  When
+        multiple references have the same priority, the behavior of
+        selection process within the group is non-revertive."
+    ::= { f3SyncEntry 11 }
+
+f3SyncWaitToRestoreTime OBJECT-TYPE
+    SYNTAX         Integer32 (0..12)
+    MAX-ACCESS     read-write
+    STATUS         current
+    DESCRIPTION    "This object allows configuration of the Sync entity's wait-to-restore
+        time (in minutes).  A value of 0 disables WTR timers for all references."
+    ::= { f3SyncEntry 12 }
+
+f3SyncOperationSyncRef OBJECT-TYPE
+    SYNTAX         VariablePointer
+    MAX-ACCESS     read-write
+    STATUS         current
+    DESCRIPTION    "This object allows configuration of the Object Identifier of the
+        Sync Reference Entity on which the f3SyncOperationType is performed.
+        A value of 0.0 denotes no sync reference is chosen for operation."
+    ::= { f3SyncEntry 13 }
+
+f3SyncOperationType OBJECT-TYPE
+    SYNTAX         SyncOperationType
+    MAX-ACCESS     read-write
+    STATUS         current
+    DESCRIPTION    "This object allows to perform the specified operation on the Sync Reference
+        specified by f3SyncOperationSyncRef."
+    ::= { f3SyncEntry 14 }
+    
+f3SyncPLLBw OBJECT-TYPE
+    SYNTAX         PLLBw
+    MAX-ACCESS     read-write
+    STATUS         current
+    DESCRIPTION    "This object allows configuration of the Sync entity's Clock PLL Bandwidth."
+    ::= { f3SyncEntry 15 }
+
+--
+-- Sync Reference Table 
+--
+f3SyncRefTable OBJECT-TYPE
+    SYNTAX         SEQUENCE OF F3SyncRefEntry
+    MAX-ACCESS     not-accessible
+    STATUS         current
+    DESCRIPTION    "A list of entries corresponding to the Sync Reference entities."
+    ::= { f3SyncObjects 2 }
+
+f3SyncRefEntry OBJECT-TYPE
+    SYNTAX         F3SyncRefEntry
+    MAX-ACCESS     not-accessible
+    STATUS         current
+    DESCRIPTION    "An entry containing information applicable to a particular
+        Sync Reference Entity."
+    INDEX    { neIndex, shelfIndex, slotIndex, f3SyncIndex, f3SyncRefIndex }
+    ::= { f3SyncRefTable 1 }
+
+F3SyncRefEntry  ::=  SEQUENCE    {
+        f3SyncRefIndex         Integer32,
+        f3SyncRefReference     VariablePointer,
+        f3SyncRefPriority      Integer32,
+        f3SyncRefStatus        SyncRefStatus,
+        f3SyncRefState         SyncRefState,
+        f3SyncRefReceivedQL    SSMQualityLevel,
+        f3SyncRefStorageType   StorageType,
+        f3SyncRefRowStatus     RowStatus,
+        -- new columns added for R4.3CC
+        f3SyncRefAlias         DisplayString,
+        f3SyncRefEffectiveQL   SSMQualityLevel,
+        f3SyncRefOperationType SyncOperationType
+        }
+
+f3SyncRefIndex OBJECT-TYPE
+    SYNTAX         Integer32
+    MAX-ACCESS     read-only
+    STATUS         current
+    DESCRIPTION    "Unique index value associated with the Sync Reference Entity."
+    ::= { f3SyncRefEntry 1 }
+
+f3SyncRefReference OBJECT-TYPE
+    SYNTAX         VariablePointer
+    MAX-ACCESS     read-create
+    STATUS         current
+    DESCRIPTION    "This object represents the external sync reference to be
+        used as system clock reference source."
+    ::= { f3SyncRefEntry 2 }
+
+f3SyncRefPriority OBJECT-TYPE
+    SYNTAX         Integer32 (1..10)
+    MAX-ACCESS     read-create
+    STATUS         current
+    DESCRIPTION    "This object represents the priority of the external sync reference
+        to be used as system clock reference source.  This value is
+        not mandatory when a single clock reference source is supported.
+        Lower priority value indicates higher priority."
+    ::= { f3SyncRefEntry 3 }
+
+f3SyncRefStatus OBJECT-TYPE
+    SYNTAX         SyncRefStatus
+    MAX-ACCESS     read-only
+    STATUS         current
+    DESCRIPTION    "This object provides the sync reference status."
+    ::= { f3SyncRefEntry 4 }
+
+f3SyncRefState OBJECT-TYPE
+    SYNTAX         SyncRefState
+    MAX-ACCESS     read-only
+    STATUS         current
+    DESCRIPTION    "This object provides the sync reference state."
+    ::= { f3SyncRefEntry 5 }
+
+f3SyncRefReceivedQL OBJECT-TYPE
+    SYNTAX         SSMQualityLevel
+    MAX-ACCESS     read-only
+    STATUS         current
+    DESCRIPTION    "This object provides the sync reference received QL."
+    ::= { f3SyncRefEntry 6 }
+
+f3SyncRefStorageType OBJECT-TYPE
+    SYNTAX         StorageType
+    MAX-ACCESS     read-create
+    STATUS         current
+    DESCRIPTION    "The type of storage configured for this entry."
+    ::= { f3SyncRefEntry 7 }
+
+f3SyncRefRowStatus OBJECT-TYPE
+    SYNTAX         RowStatus
+    MAX-ACCESS     read-create
+    STATUS         current
+    DESCRIPTION    "The status of this row.  An entry MUST NOT exist in the
+        active state unless all objects in the entry have an
+        appropriate value, as described
+        in the description clause for each writable object.
+        
+        The values of f3SyncRefRowStatus supported are
+        createAndGo(4) and destroy(6).  All mandatory attributes
+        must be specified in a single SNMP SET request with
+        f3SyncRefRowStatus value as createAndGo(4).
+        Upon successful row creation, this object has a
+        value of active(1).
+        
+        The f3SyncRefRowStatus object may be modified if
+        the associated instance of this object is equal to active(1)."
+    ::= { f3SyncRefEntry 8 }
+
+f3SyncRefAlias OBJECT-TYPE
+    SYNTAX         DisplayString (SIZE(0..256))
+    MAX-ACCESS     read-create
+    STATUS         current
+    DESCRIPTION    "This object allows SNMP management entities to provide an
+        alias to the Sync Reference entity."
+    ::= { f3SyncRefEntry 9 }
+
+f3SyncRefEffectiveQL OBJECT-TYPE
+    SYNTAX         SSMQualityLevel
+    MAX-ACCESS     read-only
+    STATUS         current
+    DESCRIPTION    "This object provides the sync reference effective QL."
+    ::= { f3SyncRefEntry 10 }
+
+f3SyncRefOperationType OBJECT-TYPE
+    SYNTAX         SyncOperationType
+    MAX-ACCESS     read-only
+    STATUS         current
+    DESCRIPTION    "This object provides information on the current/active operation
+        on this sync reference."
+    ::= { f3SyncRefEntry 11 }
+
+--
+-- Time Clock Table 
+--
+f3TimeClockTable OBJECT-TYPE
+    SYNTAX         SEQUENCE OF F3TimeClockEntry
+    MAX-ACCESS     not-accessible
+    STATUS         current
+    DESCRIPTION    "A list of entries corresponding to the Time Clock entities."
+    ::= { f3SyncObjects 3 }
+
+f3TimeClockEntry OBJECT-TYPE
+    SYNTAX         F3TimeClockEntry
+    MAX-ACCESS     not-accessible
+    STATUS         current
+    DESCRIPTION    "An entry containing information applicable to a particular
+        Time Clock Entity."
+    INDEX    { neIndex, shelfIndex, slotIndex, f3TimeClockIndex }
+    ::= { f3TimeClockTable 1 }
+
+F3TimeClockEntry  ::=  SEQUENCE    {
+        f3TimeClockIndex                   Integer32,
+        f3TimeClockAlias                   F3DisplayString,
+        f3TimeClockAdminState              AdminState,
+        f3TimeClockOperationalState        OperationalState,
+        f3TimeClockSecondaryState          SecondaryState,
+        f3TimeClockSelectedReference       VariablePointer,
+        f3TimeClockClockMode               TimeClockMode,
+        f3TimeClockClockClass              Unsigned32,
+        f3TimeClockSelectionMode           SyncSelectionMode,
+        f3TimeClockWaitToRestoreTime       Integer32,
+        f3TimeClockOperationTimeClockRef   VariablePointer,
+        f3TimeClockOperationType           SyncOperationType,
+        f3TimeClockLeap59                  TruthValue,
+        f3TimeClockLeap61                  TruthValue,
+        f3TimeClockTimeTraceAbilityStatus  TimeTraceAbilityStatus,
+        f3TimeClockExpectedQL              SSMQualityLevel,
+        f3TimeClockCurrentQL               SSMQualityLevel,
+        f3TimeClockSyncRefCandidate        TruthValue,
+        f3TimeClockTimeHoldoverPerformance TimeHoldoverPerformance,
+        f3TimeClockUtcOffset               Unsigned32,
+        f3TimeClockCurrentTimeOfDay        DateAndTime,
+        f3TimeClockFrequencyReference      VariablePointer,
+        f3TimeClockFrequencyClockMode      ClockMode,
+        f3TimeClockTimeScale               TimeScale,
+        f3TimeClockTODSource               TODSource,
+        f3TimeClockEPRTCModeEnabled        TruthValue,
+        f3TimeClockTimeHoldoverTimeout     Integer32,
+        f3TimeClockTimeInHoldover          Integer32,
+        f3TimeClockAtoiCurrentOffset       Integer32,
+        f3TimeClockAtoiJumpSeconds         Integer32,
+        f3TimeClockAtoiTimeOfNextJump      Counter64,
+        f3TimeClockAtoiDisplayName         DisplayString,
+        f3TimeClockPhaseAdjust             Integer32
+        }
+
+f3TimeClockIndex OBJECT-TYPE
+    SYNTAX         Integer32
+    MAX-ACCESS     not-accessible
+    STATUS         current
+    DESCRIPTION    "Unique index value associated with the Time Clock Entity."
+    ::= { f3TimeClockEntry 1 }
+
+f3TimeClockAlias OBJECT-TYPE
+    SYNTAX         F3DisplayString (SIZE(0..256))
+    MAX-ACCESS     read-write
+    STATUS         current
+    DESCRIPTION    "This object allows SNMP management entities to provide an
+        alias to the Time Clock entity."
+    ::= { f3TimeClockEntry 2 }
+
+f3TimeClockAdminState OBJECT-TYPE
+    SYNTAX         AdminState
+    MAX-ACCESS     read-write
+    STATUS         current
+    DESCRIPTION    "This object represents the Administrative State of the Time Clock
+        Entity."
+    ::= { f3TimeClockEntry 3 }
+
+f3TimeClockOperationalState OBJECT-TYPE
+    SYNTAX         OperationalState
+    MAX-ACCESS     read-only
+    STATUS         current
+    DESCRIPTION    "This object represents the Operational State of the Time Clock
+        Entity."
+    ::= { f3TimeClockEntry 4 }
+
+f3TimeClockSecondaryState OBJECT-TYPE
+    SYNTAX         SecondaryState
+    MAX-ACCESS     read-only
+    STATUS         current
+    DESCRIPTION    "This object represents the Secondary State of the Time Clock
+        Entity."
+    ::= { f3TimeClockEntry 5 }
+
+f3TimeClockSelectedReference OBJECT-TYPE
+    SYNTAX         VariablePointer
+    MAX-ACCESS     read-only
+    STATUS         current
+    DESCRIPTION    "This object provides the source of the currently selected
+        Time Clock reference. This would be the OID of the actual entity (GPS port, PPS port etc.).
+        An OID value of {0 0} represents internal clock."
+    ::= { f3TimeClockEntry 6 }
+
+f3TimeClockClockMode OBJECT-TYPE
+    SYNTAX         TimeClockMode
+    MAX-ACCESS     read-only
+    STATUS         current
+    DESCRIPTION    "This object provides the Time Clock mode."
+    ::= { f3TimeClockEntry 7 }
+
+f3TimeClockClockClass OBJECT-TYPE
+    SYNTAX         Unsigned32
+    MAX-ACCESS     read-only
+    STATUS         deprecated
+    DESCRIPTION    "This object provides the Time Clock Clock Class"
+    ::= { f3TimeClockEntry 8 }
+
+f3TimeClockSelectionMode OBJECT-TYPE
+    SYNTAX         SyncSelectionMode
+    MAX-ACCESS     read-write
+    STATUS         current
+    DESCRIPTION    "!! Currently Only Priority Mode is supported !!
+        This object represents the Time Clock entity's selection mode.
+        If this mode is configured as ql-mode, the selection of
+        which reference should be used shall be based upon the
+        reference's Quality Level.  The highest received
+        Quality Level shall be the selected reference.  The priority
+        shall only be used to distinguish between references with the
+        same received QL.  When multiple references have the same QL
+        and same priority, the behavior of selection process within
+        the group is non-revertive.
+        If this mode is configued as priority-mode, the selection
+        of which reference should be used shall be based upon
+        the reference's priority (i.e. QL is disabled).  When
+        multiple references have the same priority, the behavior of
+        selection process within the group is non-revertive."
+    ::= { f3TimeClockEntry 9 }
+
+f3TimeClockWaitToRestoreTime OBJECT-TYPE
+    SYNTAX         Integer32 (0..12)
+    MAX-ACCESS     read-write
+    STATUS         current
+    DESCRIPTION    "This object allows configuration of the Time Clock entity's wait-to-restore
+        time (in minutes).  A value of 0 disables WTR timers for all references."
+    ::= { f3TimeClockEntry 10 }
+
+f3TimeClockOperationTimeClockRef OBJECT-TYPE
+    SYNTAX         VariablePointer
+    MAX-ACCESS     read-write
+    STATUS         current
+    DESCRIPTION    "This object allows configuration of the Object Identifier of the
+        TimeClock Reference Entity on which the f3TimeClockOperationType is performed.
+        A value of 0.0 denotes no Time Clock reference is chosen for operation."
+    ::= { f3TimeClockEntry 11 }
+
+f3TimeClockOperationType OBJECT-TYPE
+    SYNTAX         SyncOperationType
+    MAX-ACCESS     read-write
+    STATUS         current
+    DESCRIPTION    "This object allows to perform the specified operation on the Time Clock Reference
+        specified by f3TimeClockOperationTimeClockRef."
+    ::= { f3TimeClockEntry 12 }
+
+f3TimeClockLeap59 OBJECT-TYPE
+    SYNTAX         TruthValue
+    MAX-ACCESS     read-only
+    STATUS         current
+    DESCRIPTION    "True if last minute of current UTC day contains 59 seconds, else false"
+    ::= { f3TimeClockEntry 13 }
+
+f3TimeClockLeap61 OBJECT-TYPE
+    SYNTAX         TruthValue
+    MAX-ACCESS     read-only
+    STATUS         current
+    DESCRIPTION    "True if last minute of current UTC day contains 61 seconds, else false"
+    ::= { f3TimeClockEntry 14 }
+
+f3TimeClockTimeTraceAbilityStatus OBJECT-TYPE
+    SYNTAX         TimeTraceAbilityStatus
+    MAX-ACCESS     read-only
+    STATUS         current
+    DESCRIPTION    "This object describe the trace ability status."
+    ::= { f3TimeClockEntry 15 }
+
+f3TimeClockExpectedQL OBJECT-TYPE
+    SYNTAX         SSMQualityLevel
+    MAX-ACCESS     read-write
+    STATUS         current
+    DESCRIPTION    "This object describe the expected quality level."
+    ::= { f3TimeClockEntry 16 }
+
+f3TimeClockCurrentQL OBJECT-TYPE
+    SYNTAX         SSMQualityLevel
+    MAX-ACCESS     read-only
+    STATUS         current
+    DESCRIPTION    "This object describe the current quality level."
+    ::= { f3TimeClockEntry 17 }
+
+f3TimeClockSyncRefCandidate OBJECT-TYPE
+    SYNTAX         TruthValue
+    MAX-ACCESS     read-write
+    STATUS         current
+    DESCRIPTION    "This object describe whether it is sync reference candiddate."
+    ::= { f3TimeClockEntry 18 }
+
+f3TimeClockTimeHoldoverPerformance OBJECT-TYPE
+    SYNTAX         TimeHoldoverPerformance
+    MAX-ACCESS     read-write
+    STATUS         current
+    DESCRIPTION    "This object describe the Holdover performance."
+    ::= { f3TimeClockEntry 19 }
+
+f3TimeClockUtcOffset OBJECT-TYPE
+    SYNTAX         Unsigned32
+    MAX-ACCESS     read-only
+    STATUS         current
+    DESCRIPTION    "This object describe the UTC offset."
+    ::= { f3TimeClockEntry 20 }
+
+f3TimeClockCurrentTimeOfDay OBJECT-TYPE
+    SYNTAX         DateAndTime
+    MAX-ACCESS     read-only
+    STATUS         current
+    DESCRIPTION    "This object allows specification of the Time Clock Current
+        Time of Day."
+    ::= { f3TimeClockEntry 21 }
+
+f3TimeClockFrequencyReference OBJECT-TYPE
+    SYNTAX         VariablePointer
+    MAX-ACCESS     read-write
+    STATUS         current
+    DESCRIPTION    "This object provides the source of the currently selected frequency source for the Time Clock.
+        This would be the OID of the actual entity (GNSS Receiver port, Input Frquency Port, Sync object).
+        An OID value of {0.0} represents a state where the Time Clock does not use a dedicated frequency input."
+    ::= { f3TimeClockEntry 22 }
+
+f3TimeClockFrequencyClockMode OBJECT-TYPE
+    SYNTAX         ClockMode
+    MAX-ACCESS     read-only
+    STATUS         current
+    DESCRIPTION    "This object provides the Frequency Clock mode determined according to the used f3TimeClockFrequencyReference.
+        In Case the f3TimeClockFrequencyReference is not selected (0.0), a 'notAvailable' value shall be used here"
+    ::= { f3TimeClockEntry 23 }
+
+f3TimeClockTimeScale OBJECT-TYPE
+    SYNTAX         TimeScale
+    MAX-ACCESS     read-write
+    STATUS         current
+    DESCRIPTION    "This object allows configuration of the Sync entity's Time Scale. Only PTP or ARB values are allowed.
+    In PTP mode, phase is recovered from time reference source. In ARB mode phase is taken from Linux time and locked on chosen reference."
+    ::= { f3TimeClockEntry 24 }
+
+f3TimeClockTODSource OBJECT-TYPE
+    SYNTAX         TODSource
+    MAX-ACCESS     read-only
+    STATUS         current
+    DESCRIPTION    "This object provides the ARB TOD Source. The value decided according to the Time Scale parameter.
+    Can be NA or System TOD."
+    ::= { f3TimeClockEntry 25 }
+f3TimeClockEPRTCModeEnabled OBJECT-TYPE
+    SYNTAX         TruthValue
+    MAX-ACCESS     read-write
+    STATUS         current
+    DESCRIPTION    "This object describe whether it is EPRTC Mode Enabled.
+    When enabled, the time clock combines the stable frequency input, such as a Cesium Clock, to extend the holdover capability to meet the e-PRTC holdover standards. 
+    Before configuring this setting, ensure that you activate the e-PRTC license.
+    Note: This setting is applicable for Rb/HQ++ oscillators only."
+    ::= { f3TimeClockEntry 26 }
+
+f3TimeClockTimeHoldoverTimeout OBJECT-TYPE
+    SYNTAX         Integer32 (0..3000000)
+    MAX-ACCESS     read-write
+    STATUS         current
+    DESCRIPTION    "Configurable Holdover time
+                    The time (0..3000000 seconds) that the OCXO is expected to maintain the
+                    required accuracy and maintain Holdover-within-limits. Default is 0."
+    ::= { f3TimeClockEntry 27 }
+
+f3TimeClockTimeInHoldover OBJECT-TYPE
+    SYNTAX         Integer32
+    MAX-ACCESS     read-only
+    STATUS         current
+    DESCRIPTION    "Time (seconds) in Holdover."
+    ::= { f3TimeClockEntry 28 }
+
+f3TimeClockAtoiCurrentOffset OBJECT-TYPE
+    SYNTAX         Integer32 (-32768..32767)
+    UNITS          "seconds"
+    MAX-ACCESS     read-only
+    STATUS         current
+    DESCRIPTION
+            "The value of currentOffset (offset of the alternate time, in seconds, from
+            the time of this node). The alternate time is the sum of this value and the time of
+            the node, which is TAI if the PTP time scale is used."
+    REFERENCE "IEC61588 16.3.3.4"
+    ::= { f3TimeClockEntry 29 }
+
+f3TimeClockAtoiJumpSeconds OBJECT-TYPE
+    SYNTAX         Integer32 (-32768..32767)
+    UNITS          "seconds"
+    MAX-ACCESS     read-only
+    STATUS         current
+    DESCRIPTION
+            "The value of jumpSeconds (size of the next discontinuity, in seconds, of the
+            alternate time). A value of zero indicates that no discontinuity is expected. A
+            positive value indicates that the discontinuity
+            will cause the currentOffset of the alternate time to increase."
+    REFERENCE "IEC61588 16.3.3.5"
+    ::= { f3TimeClockEntry 30 }
+
+f3TimeClockAtoiTimeOfNextJump OBJECT-TYPE
+    SYNTAX         Counter64
+    UNITS          "seconds"
+    MAX-ACCESS     read-only
+    STATUS         current
+    DESCRIPTION
+            "The value of timeOfNextJump (value of the seconds portion of the time of the
+            transmitting node at the time that the next discontinuity will occur). The
+            discontinuity occurs at the start of the second indicated
+            by the value of timeOfNextJump."
+    REFERENCE "IEC61588 16.3.3.6"
+    ::= { f3TimeClockEntry 31 }
+
+f3TimeClockAtoiDisplayName OBJECT-TYPE
+    SYNTAX         DisplayString (SIZE(0..10))
+    MAX-ACCESS     read-only
+    STATUS         current
+    DESCRIPTION
+            "The value of displayName (text name of the alternate timescale in ASCII-8).
+            It represent the time zone, e.g. CET;
+            a leading character of * indicates that daylight saving time is in effect."
+    REFERENCE "IEC61588 16.3.3.6"
+    ::= { f3TimeClockEntry 32 }
+
+f3TimeClockPhaseAdjust OBJECT-TYPE
+    SYNTAX         Integer32 (0..250000)
+    MAX-ACCESS     read-write
+    STATUS         current
+    DESCRIPTION    "Configurable Phase Adjust (0..250000 nSec) ."
+    ::= { f3TimeClockEntry 33 }
+
+--
+-- Time Clock Reference Table 
+--
+f3TimeClockRefTable OBJECT-TYPE
+    SYNTAX         SEQUENCE OF F3TimeClockRefEntry
+    MAX-ACCESS     not-accessible
+    STATUS         current
+    DESCRIPTION    "A list of entries corresponding to the Time Clock Reference entities."
+    ::= { f3SyncObjects 4 }
+
+f3TimeClockRefEntry OBJECT-TYPE
+    SYNTAX         F3TimeClockRefEntry
+    MAX-ACCESS     not-accessible
+    STATUS         current
+    DESCRIPTION    "An entry containing information applicable to a particular
+        Time Clock Reference Entity."
+    INDEX    { neIndex, shelfIndex, slotIndex, f3TimeClockIndex, f3TimeClockRefIndex }
+    ::= { f3TimeClockRefTable 1 }
+
+F3TimeClockRefEntry  ::=  SEQUENCE    {
+        f3TimeClockRefIndex         Integer32,
+        f3TimeClockRefAlias         F3DisplayString,
+        f3TimeClockRefReference     VariablePointer,
+        f3TimeClockRefPriority      Integer32,
+        f3TimeClockRefStatus        SyncRefStatus,
+        f3TimeClockRefState         SyncRefState,
+        f3TimeClockRefOperationType SyncOperationType,
+        f3TimeClockRefStorageType   StorageType,
+        f3TimeClockRefRowStatus     RowStatus
+        }
+
+f3TimeClockRefIndex OBJECT-TYPE
+    SYNTAX         Integer32
+    MAX-ACCESS     not-accessible
+    STATUS         current
+    DESCRIPTION    "Unique index value associated with the Time Clock Reference Entity."
+    ::= { f3TimeClockRefEntry 1 }
+
+f3TimeClockRefAlias OBJECT-TYPE
+    SYNTAX         F3DisplayString (SIZE(0..256))
+    MAX-ACCESS     read-create
+    STATUS         current
+    DESCRIPTION    "This object allows SNMP management entities to provide an
+        alias to the Time Clock Reference entity."
+    ::= { f3TimeClockRefEntry 2 }
+
+f3TimeClockRefReference OBJECT-TYPE
+    SYNTAX         VariablePointer
+    MAX-ACCESS     read-create
+    STATUS         current
+    DESCRIPTION    "This object represents the external reference to be
+        used as system clock reference source."
+    ::= { f3TimeClockRefEntry 3 }
+
+f3TimeClockRefPriority OBJECT-TYPE
+    SYNTAX         Integer32 (1..10)
+    MAX-ACCESS     read-create
+    STATUS         current
+    DESCRIPTION    "This object represents the priority of the external reference
+        to be used as Time clock reference source.  This value is
+        not mandatory when a single clock reference source is supported.
+        Lower priority value indicates higher priority."
+    ::= { f3TimeClockRefEntry 4 }
+
+f3TimeClockRefStatus OBJECT-TYPE
+    SYNTAX         SyncRefStatus
+    MAX-ACCESS     read-only
+    STATUS         current
+    DESCRIPTION    "This object provides the Time Clock reference status."
+    ::= { f3TimeClockRefEntry 5 }
+
+f3TimeClockRefState OBJECT-TYPE
+    SYNTAX         SyncRefState
+    MAX-ACCESS     read-only
+    STATUS         current
+    DESCRIPTION    "This object provides the Time Clock reference state."
+    ::= { f3TimeClockRefEntry 6 }
+
+f3TimeClockRefOperationType OBJECT-TYPE
+    SYNTAX         SyncOperationType
+    MAX-ACCESS     read-only
+    STATUS         current
+    DESCRIPTION    "This object provides information on the current/active operation
+        on this Time Clock reference."
+    ::= { f3TimeClockRefEntry 7 }
+
+f3TimeClockRefStorageType OBJECT-TYPE
+    SYNTAX         StorageType
+    MAX-ACCESS     read-create
+    STATUS         current
+    DESCRIPTION    "The type of storage configured for this entry."
+    ::= { f3TimeClockRefEntry 8 }
+
+f3TimeClockRefRowStatus OBJECT-TYPE
+    SYNTAX         RowStatus
+    MAX-ACCESS     read-create
+    STATUS         current
+    DESCRIPTION    "The status of this row.  An entry MUST NOT exist in the
+        active state unless all objects in the entry have an
+        appropriate value, as described
+        in the description clause for each writable object.
+        
+        The values of f3TimeClockRefRowStatus supported are
+        createAndGo(4) and destroy(6).  All mandatory attributes
+        must be specified in a single SNMP SET request with
+        f3TimeClockRefRowStatus value as createAndGo(4).
+        Upon successful row creation, this object has a
+        value of active(1).
+        
+        The f3TimeClockRefRowStatus object may be modified if
+        the associated instance of this object is equal to active(1)."
+    ::= { f3TimeClockRefEntry 9 }
+
+--
+-- PRC Table 
+--
+f3PrcTable OBJECT-TYPE
+    SYNTAX         SEQUENCE OF F3PrcEntry
+    MAX-ACCESS     not-accessible
+    STATUS         current
+    DESCRIPTION    "A list of entries corresponding to the Primary Reference Clock (PRC) entities."
+    ::= { f3SyncObjects 5 }
+
+f3PrcEntry OBJECT-TYPE
+    SYNTAX         F3PrcEntry
+    MAX-ACCESS     not-accessible
+    STATUS         current
+    DESCRIPTION    "An entry containing information applicable to a particular
+        Primary Reference Clock Entity."
+    INDEX    { neIndex, shelfIndex, slotIndex, f3PrcIndex }
+    ::= { f3PrcTable 1 }
+
+F3PrcEntry  ::=  SEQUENCE    {
+        f3PrcIndex                   Integer32,
+        f3PrcAlias                   F3DisplayString,
+        f3PrcAdminState              AdminState,
+        f3PrcOperationalState        OperationalState,
+        f3PrcSecondaryState          SecondaryState,
+        f3PrcSsmMode                 SsmMode,
+        f3PrcClockMode               TimeClockMode,
+        f3PrcAccuracyAdjustement     Integer32,
+        f3PrcCurrentQL               SSMQualityLevel,
+        f3PrcAcknowledgeAction       AcknowledgeType,
+        f3PrcRestartAction           RestartType
+        }
+
+f3PrcIndex OBJECT-TYPE
+    SYNTAX         Integer32(-2147483648..2147483647)
+    MAX-ACCESS     not-accessible
+    STATUS         current
+    DESCRIPTION    "Unique index value associated with the Primary Reference Clock Entity."
+    ::= { f3PrcEntry 1 }
+
+f3PrcAlias OBJECT-TYPE
+    SYNTAX         F3DisplayString (SIZE(0..256))
+    MAX-ACCESS     read-write
+    STATUS         current
+    DESCRIPTION    "This object allows SNMP management entities to provide an
+        alias to the Primary Reference Clock entity."
+    ::= { f3PrcEntry 2 }
+
+f3PrcAdminState OBJECT-TYPE
+    SYNTAX         AdminState
+    MAX-ACCESS     read-write
+    STATUS         current
+    DESCRIPTION    "This object represents the Administrative State of the Primary Reference Clock
+        Entity."
+    ::= { f3PrcEntry 3 }
+
+f3PrcOperationalState OBJECT-TYPE
+    SYNTAX         OperationalState
+    MAX-ACCESS     read-only
+    STATUS         current
+    DESCRIPTION    "This object represents the Operational State of the Primary Reference Clock
+        Entity."
+    ::= { f3PrcEntry 4 }
+
+f3PrcSecondaryState OBJECT-TYPE
+    SYNTAX         SecondaryState
+    MAX-ACCESS     read-only
+    STATUS         current
+    DESCRIPTION    "This object represents the Secondary State of the Primary Reference Clock
+        Entity."
+    ::= { f3PrcEntry 5 }
+
+f3PrcSsmMode OBJECT-TYPE
+    SYNTAX         SsmMode
+    MAX-ACCESS     read-write
+    STATUS         current
+    DESCRIPTION    "This object provides the PRC SSM mode. It determines whether or not the SSM
+        is given to the BITS-OUT Ports."
+    ::= { f3PrcEntry 6 }
+
+f3PrcClockMode OBJECT-TYPE
+    SYNTAX         TimeClockMode
+    MAX-ACCESS     read-only
+    STATUS         current
+    DESCRIPTION    "This object provides the PRC Clock Mode."
+    ::= { f3PrcEntry 7 }
+
+f3PrcAccuracyAdjustement OBJECT-TYPE
+    SYNTAX         Integer32 (-1000000..1000000)
+    MAX-ACCESS     read-write
+    STATUS         current
+    DESCRIPTION    "This object allows to adjust an internal frequency to optimize
+        the PRC accuracy. This is typically done only once after the Prc has been
+        tested. The value is a relative frequency with unit value of 10e-15."
+    ::= { f3PrcEntry 8 }
+
+f3PrcCurrentQL OBJECT-TYPE
+    SYNTAX         SSMQualityLevel
+    MAX-ACCESS     read-only
+    STATUS         current
+    DESCRIPTION    "This object describe the current quality level."
+    ::= { f3PrcEntry 9 }
+
+f3PrcAcknowledgeAction OBJECT-TYPE
+    SYNTAX         AcknowledgeType 
+    MAX-ACCESS     read-write
+    STATUS         current
+    DESCRIPTION    "Allows to acknowledge the alarm that raises when 
+        f3AccuracyAdjustement value is changed."
+    ::= { f3PrcEntry 10 }
+
+f3PrcRestartAction OBJECT-TYPE
+    SYNTAX         RestartType 
+    MAX-ACCESS     read-write
+    STATUS         current
+    DESCRIPTION    "Allows to perform specified warm restart action on the PRC Clock.
+        Cold restart is refused by the equipment"
+    ::= { f3PrcEntry 11 }
+
+
+--
+-- Sync Protection Group Table 
+--
+f3SyncProtGroupTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF F3SyncProtGroupEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "A list of entries corresponding to the Sync Protection Groups.
+             "
+    ::= { f3SyncObjects 6 }
+
+f3SyncProtGroupEntry OBJECT-TYPE
+    SYNTAX     F3SyncProtGroupEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry containing information applicable to a Sync
+             Protection Group."
+    INDEX { neIndex, f3SyncProtGroupIndex }
+    ::= { f3SyncProtGroupTable 1 }
+
+F3SyncProtGroupEntry ::= SEQUENCE {
+    f3SyncProtGroupIndex                 Integer32,
+    f3SyncProtGroupAdminState            AdminState,
+    f3SyncProtGroupActiveMember          VariablePointer,
+    f3SyncProtGroupLastSwitchOverTime    TimeTicks,
+    f3SyncProtGroupLastSwitchOverReason  CmGenPgSwitchoverReason,
+    f3SyncProtGroupStorageType           StorageType, 
+    f3SyncProtGroupRowStatus             RowStatus
+}
+
+f3SyncProtGroupIndex OBJECT-TYPE
+    SYNTAX     Integer32
+    MAX-ACCESS read-only 
+    STATUS     current
+    DESCRIPTION
+         "Unique index value associated with the Sync Protection Group
+          entity."
+     ::= { f3SyncProtGroupEntry 1 }
+
+f3SyncProtGroupAdminState OBJECT-TYPE
+    SYNTAX         AdminState
+    MAX-ACCESS     read-write
+    STATUS         current
+    DESCRIPTION
+         "This object represents the Administrative State of the Sync
+          Protection Group."
+    ::= { f3SyncProtGroupEntry 2 }
+
+f3SyncProtGroupActiveMember OBJECT-TYPE
+    SYNTAX     VariablePointer
+    MAX-ACCESS read-only 
+    STATUS     current
+    DESCRIPTION
+         "The corresponding OID of the Active Member in the Sync Protection Group."
+     ::= { f3SyncProtGroupEntry 3 }
+     
+f3SyncProtGroupLastSwitchOverTime OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only 
+    STATUS     current
+    DESCRIPTION
+         "The value of sysUpTime when last switch over occurred."
+     ::= { f3SyncProtGroupEntry 4 }
+
+f3SyncProtGroupLastSwitchOverReason OBJECT-TYPE
+    SYNTAX     CmGenPgSwitchoverReason
+    MAX-ACCESS read-only 
+    STATUS     current
+    DESCRIPTION
+         "The reason for last switch over in the Sync Protection Group."
+     ::= { f3SyncProtGroupEntry 5 }
+
+f3SyncProtGroupStorageType OBJECT-TYPE
+    SYNTAX     StorageType
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The type of storage configured for this entry."
+    ::= { f3SyncProtGroupEntry 6 }
+
+f3SyncProtGroupRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+           "The status of this row.  An entry MUST NOT exist in the 
+            active state unless all objects in the entry have an 
+            appropriate value, as described
+            in the description clause for each writable object.
+
+            The values of f3SyncProtGroupRowStatus supported are
+            createAndGo(4) and destroy(6).  All mandatory attributes
+            must be specified in a single SNMP SET request with
+            f3SyncProtGroupRowStatus value as createAndGo(4).
+            Upon successful row creation, this object has a
+            value of active(1).
+
+            The f3SyncProtGroupRowStatus object may be modified if
+            the associated instance of this object is equal to active(1)."
+    ::= { f3SyncProtGroupEntry 7 }
+
+
+---
+--- Sync Protection Member Table
+---
+f3SyncProtMemberTable  OBJECT-TYPE
+    SYNTAX      SEQUENCE OF F3SyncProtMemberEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "A list of entries for the Sync Protection Group Members."
+    ::= { f3SyncObjects 7 }
+
+f3SyncProtMemberEntry  OBJECT-TYPE
+    SYNTAX      F3SyncProtMemberEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "A conceptual row in the f3SyncProtMemberTable."
+    INDEX { neIndex, f3SyncProtGroupIndex, f3SyncProtMemberObject }
+    ::= { f3SyncProtMemberTable 1 }
+
+F3SyncProtMemberEntry ::= SEQUENCE {
+    f3SyncProtMemberObject             VariablePointer,
+    f3SyncProtMemberStorageType        StorageType,
+    f3SyncProtMemberRowStatus          RowStatus
+}
+
+f3SyncProtMemberObject OBJECT-TYPE
+    SYNTAX      VariablePointer
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+           "This object points to the Protection Group Member."
+    ::= { f3SyncProtMemberEntry 1 }
+
+f3SyncProtMemberStorageType OBJECT-TYPE
+    SYNTAX      StorageType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+           "The type of storage configured for this entry."
+    ::= { f3SyncProtMemberEntry 2 }
+
+f3SyncProtMemberRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+           "The status of this row.
+            An entry MUST NOT exist in the active state unless all
+            objects in the entry have an appropriate value, as described
+            in the description clause for each writable object.
+    
+            The values of f3SyncProtMemberRowStatus supported are
+            createAndGo(4) and destroy(6).  All mandatory attributes
+            must be specified in a single SNMP SET request with
+            f3SyncProtMemberRowStatus value as createAndGo(4).
+            Upon successful row creation, this object has a
+            value of active(1).
+    
+            The f3SyncProtMemberRowStatus object may be modified if
+            the associated instance of this object is equal to active(1)."
+    ::= { f3SyncProtMemberEntry 3 }
+
+
+--
+-- Time Clock Protection Group Table 
+--
+f3TimeClockProtGroupTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF F3TimeClockProtGroupEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "A list of entries corresponding to the Time Clock Protection Groups.
+             "
+    ::= { f3SyncObjects 8 }
+
+f3TimeClockProtGroupEntry OBJECT-TYPE
+    SYNTAX     F3TimeClockProtGroupEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry containing information applicable to a Time Clock
+             Protection Group."
+    INDEX { neIndex, f3TimeClockProtGroupIndex }
+    ::= { f3TimeClockProtGroupTable 1 }
+
+F3TimeClockProtGroupEntry ::= SEQUENCE {
+    f3TimeClockProtGroupIndex                 Integer32,
+    f3TimeClockProtGroupAdminState            AdminState,
+    f3TimeClockProtGroupActiveMember          VariablePointer,
+    f3TimeClockProtGroupLastSwitchOverTime    TimeTicks,
+    f3TimeClockProtGroupLastSwitchOverReason  CmGenPgSwitchoverReason,
+    f3TimeClockProtGroupStorageType           StorageType, 
+    f3TimeClockProtGroupRowStatus             RowStatus
+}
+
+f3TimeClockProtGroupIndex OBJECT-TYPE
+    SYNTAX     Integer32
+    MAX-ACCESS read-only 
+    STATUS     current
+    DESCRIPTION
+         "Unique index value associated with the Time Clock Protection Group
+          entity."
+     ::= { f3TimeClockProtGroupEntry 1 }
+
+f3TimeClockProtGroupAdminState OBJECT-TYPE
+    SYNTAX         AdminState
+    MAX-ACCESS     read-write
+    STATUS         current
+    DESCRIPTION
+         "This object represents the Administrative State of the
+          Time Clock Protection Group."
+    ::= { f3TimeClockProtGroupEntry 2 }
+
+f3TimeClockProtGroupActiveMember OBJECT-TYPE
+    SYNTAX     VariablePointer
+    MAX-ACCESS read-only 
+    STATUS     current
+    DESCRIPTION
+         "The corresponding OID of the Active Member in the Time Clock Protection Group."
+     ::= { f3TimeClockProtGroupEntry 3 }
+     
+f3TimeClockProtGroupLastSwitchOverTime OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only 
+    STATUS     current
+    DESCRIPTION
+         "The value of sysUpTime when last switch over occurred."
+     ::= { f3TimeClockProtGroupEntry 4 }
+
+f3TimeClockProtGroupLastSwitchOverReason OBJECT-TYPE
+    SYNTAX     CmGenPgSwitchoverReason
+    MAX-ACCESS read-only 
+    STATUS     current
+    DESCRIPTION
+         "The reason for last switch over in the Time Clock Redundancy Group."
+     ::= { f3TimeClockProtGroupEntry 5 }
+
+f3TimeClockProtGroupStorageType OBJECT-TYPE
+    SYNTAX     StorageType
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The type of storage configured for this entry."
+    ::= { f3TimeClockProtGroupEntry 6 }
+
+f3TimeClockProtGroupRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+           "The status of this row.  An entry MUST NOT exist in the 
+            active state unless all objects in the entry have an 
+            appropriate value, as described
+            in the description clause for each writable object.
+
+            The values of f3TimeClockProtGroupRowStatus supported are
+            createAndGo(4) and destroy(6).  All mandatory attributes
+            must be specified in a single SNMP SET request with
+            f3TimeClockProtGroupRowStatus value as createAndGo(4).
+            Upon successful row creation, this object has a
+            value of active(1).
+
+            The f3TimeClockProtGroupRowStatus object may be modified if
+            the associated instance of this object is equal to active(1)."
+    ::= { f3TimeClockProtGroupEntry 7 }
+
+
+---
+--- Time Clock Protection Member Table
+---
+f3TimeClockProtMemberTable  OBJECT-TYPE
+    SYNTAX      SEQUENCE OF F3TimeClockProtMemberEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "A list of entries for the Time Clock Protection Group Members."
+    ::= { f3SyncObjects 9 }
+
+f3TimeClockProtMemberEntry  OBJECT-TYPE
+    SYNTAX      F3TimeClockProtMemberEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "A conceptual row in the f3TimeClockProtMemberTable."
+    INDEX { neIndex, f3TimeClockProtGroupIndex, f3TimeClockProtMemberObject }
+    ::= { f3TimeClockProtMemberTable 1 }
+
+F3TimeClockProtMemberEntry ::= SEQUENCE {
+    f3TimeClockProtMemberObject             VariablePointer,
+    f3TimeClockProtMemberStorageType        StorageType,
+    f3TimeClockProtMemberRowStatus          RowStatus
+}
+
+f3TimeClockProtMemberObject OBJECT-TYPE
+    SYNTAX      VariablePointer
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+           "This object points to the Protection Group Member."
+    ::= { f3TimeClockProtMemberEntry 1 }
+
+f3TimeClockProtMemberStorageType OBJECT-TYPE
+    SYNTAX      StorageType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+           "The type of storage configured for this entry."
+    ::= { f3TimeClockProtMemberEntry 2 }
+
+f3TimeClockProtMemberRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+           "The status of this row.
+            An entry MUST NOT exist in the active state unless all
+            objects in the entry have an appropriate value, as described
+            in the description clause for each writable object.
+    
+            The values of f3TimeClockProtMemberRowStatus supported are
+            createAndGo(4) and destroy(6).  All mandatory attributes
+            must be specified in a single SNMP SET request with
+            f3TimeClockProtMemberRowStatus value as createAndGo(4).
+            Upon successful row creation, this object has a
+            value of active(1).
+    
+            The f3TimeClockProtMemberRowStatus object may be modified if
+            the associated instance of this object is equal to active(1)."
+    ::= { f3TimeClockProtMemberEntry 3 }
+
+
+--
+-- Conformance
+--
+f3SyncCompliances OBJECT IDENTIFIER ::= {f3SyncConformance 1}
+f3SyncGroups      OBJECT IDENTIFIER ::= {f3SyncConformance 2}
+
+f3SyncCompliance MODULE-COMPLIANCE
+    STATUS         current
+    DESCRIPTION    "Describes the requirements for conformance to the F3 Sync
+        group."
+    MODULE    -- this module
+        MANDATORY-GROUPS {
+              f3SyncObjectGroup
+        }
+
+    ::= { f3SyncCompliances 1 }
+
+f3SyncObjectGroup OBJECT-GROUP
+    OBJECTS    {
+        f3SyncIndex, f3SyncAdminState, f3SyncOperationalState,
+        f3SyncSecondaryState,
+        f3SyncNetworkClockType, f3SyncSelectedReference,
+        f3SyncClockMode, f3SyncQL,
+        f3SyncAlias, f3SyncDomain, f3SyncSelectionMode,
+        f3SyncWaitToRestoreTime, f3SyncOperationSyncRef,
+        f3SyncOperationType, f3SyncPLLBw,
+        
+        f3SyncRefIndex, f3SyncRefReference, f3SyncRefPriority,
+        f3SyncRefStatus, f3SyncRefState, f3SyncRefReceivedQL,
+        f3SyncRefStorageType, f3SyncRefRowStatus, f3SyncRefAlias,
+        f3SyncRefEffectiveQL, f3SyncRefOperationType
+        }
+    STATUS         current
+    DESCRIPTION    "A collection of objects used to manage the F3 Sync Object group."
+    ::= { f3SyncGroups 1 }
+
+f3TimeClockObjectGroup OBJECT-GROUP
+    OBJECTS    {
+        f3TimeClockIndex, f3TimeClockAlias,
+        f3TimeClockAdminState, f3TimeClockOperationalState, f3TimeClockSecondaryState,
+        f3TimeClockSelectedReference, f3TimeClockClockMode, f3TimeClockClockClass,
+        f3TimeClockSelectionMode, f3TimeClockWaitToRestoreTime, f3TimeClockOperationTimeClockRef,
+        f3TimeClockOperationType, f3TimeClockLeap59, f3TimeClockLeap61,
+        f3TimeClockTimeTraceAbilityStatus,
+        f3TimeClockExpectedQL, f3TimeClockCurrentQL,
+        f3TimeClockSyncRefCandidate, f3TimeClockTimeHoldoverPerformance, f3TimeClockUtcOffset,f3TimeClockCurrentTimeOfDay,
+        f3TimeClockFrequencyReference, f3TimeClockFrequencyClockMode, f3TimeClockTimeScale, f3TimeClockTODSource,f3TimeClockEPRTCModeEnabled,
+        f3TimeClockTimeHoldoverTimeout, f3TimeClockTimeInHoldover, 
+        f3TimeClockAtoiCurrentOffset, f3TimeClockAtoiJumpSeconds, f3TimeClockAtoiTimeOfNextJump, f3TimeClockAtoiDisplayName,
+        f3TimeClockPhaseAdjust, 
+        f3TimeClockRefIndex, f3TimeClockRefAlias, f3TimeClockRefReference, f3TimeClockRefPriority,
+        f3TimeClockRefStatus, f3TimeClockRefState, f3TimeClockRefOperationType,
+        f3TimeClockRefStorageType, f3TimeClockRefRowStatus
+        }
+    STATUS         current
+    DESCRIPTION    "A collection of objects used to manage the F3 TimeClock Object group."
+    ::= { f3SyncGroups 2 }
+
+f3PrcObjectGroup OBJECT-GROUP
+    OBJECTS    {
+        f3PrcIndex, f3PrcAlias,
+        f3PrcAdminState, f3PrcOperationalState, f3PrcSecondaryState,
+        f3PrcClockMode, f3PrcSsmMode, f3PrcAccuracyAdjustement,
+        f3PrcCurrentQL, f3PrcAcknowledgeAction, f3PrcRestartAction
+        }
+    STATUS         current
+    DESCRIPTION    "A collection of objects used to manage the F3 Primary Reference Clock Object group."
+    ::= { f3SyncGroups 3 }
+
+f3ProtObjectGroup OBJECT-GROUP
+    OBJECTS {
+        f3SyncProtGroupIndex, f3SyncProtGroupAdminState,
+        f3SyncProtGroupActiveMember,
+        f3SyncProtGroupLastSwitchOverTime, f3SyncProtGroupLastSwitchOverReason,
+        f3SyncProtGroupStorageType, f3SyncProtGroupRowStatus,
+        
+        f3SyncProtMemberObject, f3SyncProtMemberStorageType, f3SyncProtMemberRowStatus,
+        
+        f3TimeClockProtGroupIndex, f3TimeClockProtGroupAdminState,
+        f3TimeClockProtGroupActiveMember,
+        f3TimeClockProtGroupLastSwitchOverTime, f3TimeClockProtGroupLastSwitchOverReason,
+        f3TimeClockProtGroupStorageType, f3TimeClockProtGroupRowStatus,
+        
+        f3TimeClockProtMemberObject, f3TimeClockProtMemberStorageType, f3TimeClockProtMemberRowStatus
+    }
+    STATUS  current
+    DESCRIPTION
+        "A collection of objects used to manage the Protection Object group."
+    ::= { f3SyncGroups 4 }
+
+END