Initial commitHEADmain

1 files changed, 954 insertions, 0 deletions

diff --git a/MIBS/VRRPV3-MIB b/MIBS/VRRPV3-MIB
new file mode 100644
index 0000000..0d24606
--- /dev/null
+++ b/MIBS/VRRPV3-MIB
@@ -0,0 +1,954 @@
+VRRPV3-MIB DEFINITIONS ::= BEGIN  
+     
+    IMPORTS  
+        MODULE-IDENTITY, OBJECT-TYPE, 
+        NOTIFICATION-TYPE, Counter32, 
+        Integer32, mib-2, Unsigned32, 
+        Counter64, TimeTicks         
+            FROM SNMPv2-SMI                 -- RFC2578 
+ 
+        TEXTUAL-CONVENTION, RowStatus, 
+        MacAddress, TruthValue, TimeStamp, 
+        TimeInterval                         
+            FROM SNMPv2-TC                  -- RFC2579 
+     
+        MODULE-COMPLIANCE, OBJECT-GROUP,  
+        NOTIFICATION-GROUP                   
+            FROM SNMPv2-CONF                -- RFC2580 
+
+        ifIndex 
+            FROM IF-MIB                     -- RFC2863 
+        InetAddressType, InetAddress         
+
+            FROM INET-ADDRESS-MIB;          -- RFC4001 
+    
+   vrrpv3MIB  MODULE-IDENTITY  
+        LAST-UPDATED "201202130000Z"         -- Feb 13, 2012
+        ORGANIZATION "IETF VRRP Working Group"  
+        CONTACT-INFO  
+               "WG E-Mail: vrrp@ietf.org 
+ 
+                Editor:    Kalyan Tata   
+                           Nokia
+                           313 Fairchild Dr,
+                           Mountain View, CA 94043
+                           Tata_kalyan@yahoo.com"  
+ 
+        DESCRIPTION  
+            "This MIB describes objects used for managing Virtual  
+             Router Redundancy Protocol version 3 (VRRPv3).  
+  
+             Copyright (c) 2012 IETF Trust and the persons
+             identified as authors of the code.  All rights
+             reserved.
+
+             Redistribution and use in source and binary forms,
+             with or without modification, is permitted pursuant
+             to, and subject to the license terms contained in,
+             the Simplified BSD License set forth in Section
+             4.c of the IETF Trust's Legal Provisions Relating
+             to IETF Documents
+             (http://trustee.ietf.org/license-info).
+
+             This version of the MIB module is part of RFC 6527.
+             Please see the RFC for full legal notices."  
+
+        REVISION "201202120000Z"    -- Feb 13, 2012
+        DESCRIPTION "Initial version as published in RFC 6527."
+          
+          ::= { mib-2 207 }  
+ 
+-- Textual Conventions  
+     
+   Vrrpv3VrIdTC ::= TEXTUAL-CONVENTION  
+        DISPLAY-HINT "d" 
+        STATUS       current  
+        DESCRIPTION  
+            "The value of the Virtual Router Identifier noted as  
+            (VRID) in RFC 5798.  This, along with interface index
+            (ifIndex) and IP version, serves to uniquely identify
+            a virtual router on a given VRRP router." 
+        REFERENCE "RFC 5798 (Sections 3 and 5.2.3)" 
+        SYNTAX      Integer32 (1..255)  
+     
+--  VRRPv3 MIB Groups  
+    
+   vrrpv3Notifications   OBJECT IDENTIFIER ::= { vrrpv3MIB 0 } 
+   vrrpv3Objects         OBJECT IDENTIFIER ::= { vrrpv3MIB 1 } 
+   vrrpv3Conformance     OBJECT IDENTIFIER ::= { vrrpv3MIB 2 }  
+ 
+-- VRRPv3 MIB Objects  
+ 
+   vrrpv3Operations      OBJECT IDENTIFIER ::= { vrrpv3Objects 1 } 
+   vrrpv3Statistics      OBJECT IDENTIFIER ::= { vrrpv3Objects 2 }  
+ 
+--  VRRPv3 Operations Table  
+     
+    vrrpv3OperationsTable OBJECT-TYPE  
+        SYNTAX       SEQUENCE OF Vrrpv3OperationsEntry  
+        MAX-ACCESS   not-accessible  
+        STATUS       current  
+        DESCRIPTION  
+            "Unified Operations table for a VRRP router that
+             consists of a sequence (i.e., one or more conceptual 
+             rows) of 'vrrpv3OperationsEntry' items each of which  
+             describe the operational characteristics of a virtual 
+             router." 
+ 
+        ::= { vrrpv3Operations 1 }  
+     
+    vrrpv3OperationsEntry OBJECT-TYPE  
+        SYNTAX       Vrrpv3OperationsEntry  
+        MAX-ACCESS   not-accessible  
+        STATUS       current  
+        DESCRIPTION  
+            "An entry in the vrrpv3OperationsTable containing the   
+             operational characteristics of a virtual router.
+             On a VRRP router, a given virtual router is
+             identified by a combination of ifIndex, VRID, and
+             the IP version.  ifIndex represents an interface of
+             the router.
+     
+             A row must be created with vrrpv3OperationsStatus 
+             set to initialize(1) and cannot transition to 
+             backup(2) or master(3) until
+             vrrpv3OperationsRowStatus is transitioned to
+             active(1).
+     
+             The information in this table is persistent and when  
+             written the entity SHOULD save the change to non- 
+             volatile storage." 
+     
+        INDEX    { ifIndex, vrrpv3OperationsVrId,  
+                   vrrpv3OperationsInetAddrType 
+                  }  
+        ::= { vrrpv3OperationsTable 1 }  
+ 
+    Vrrpv3OperationsEntry ::=  
+ 
+        SEQUENCE {  
+            vrrpv3OperationsVrId  
+                Vrrpv3VrIdTC,  
+            vrrpv3OperationsInetAddrType  
+                InetAddressType,  
+            vrrpv3OperationsMasterIpAddr  
+                InetAddress,  
+            vrrpv3OperationsPrimaryIpAddr  
+                InetAddress,  
+            vrrpv3OperationsVirtualMacAddr  
+                MacAddress,  
+            vrrpv3OperationsStatus  
+                INTEGER,  
+            vrrpv3OperationsPriority  
+                Unsigned32, 
+            vrrpv3OperationsAddrCount 
+                Integer32,  
+            vrrpv3OperationsAdvInterval  
+                TimeInterval,  
+            vrrpv3OperationsPreemptMode  
+                TruthValue,  
+            vrrpv3OperationsAcceptMode  
+                TruthValue,  
+            vrrpv3OperationsUpTime  
+                TimeTicks,  
+            vrrpv3OperationsRowStatus  
+                RowStatus  
+    }  
+    vrrpv3OperationsVrId OBJECT-TYPE  
+        SYNTAX       Vrrpv3VrIdTC  
+        MAX-ACCESS   not-accessible  
+        STATUS       current  
+        DESCRIPTION  
+            "This object contains the Virtual Router Identifier  
+             (VRID)."  
+        REFERENCE "RFC 4001" 
+        ::= { vrrpv3OperationsEntry 1 }  
+ 
+    vrrpv3OperationsInetAddrType OBJECT-TYPE  
+        SYNTAX       InetAddressType  
+        MAX-ACCESS   not-accessible  
+        STATUS       current  
+        DESCRIPTION  
+            "The IP address type of Vrrpv3OperationsEntry and  
+             Vrrpv3AssociatedIpAddrEntry.  This value determines  
+             the type for vrrpv3OperationsMasterIpAddr,  
+             vrrpv3OperationsPrimaryIpAddr, and  
+             vrrpv3AssociatedIpAddrAddress.  
+ 
+             ipv4(1) and ipv6(2) are the only two values supported  
+             in this MIB module." 
+        REFERENCE "RFC 4001" 
+        ::= { vrrpv3OperationsEntry 2 } 
+   
+    vrrpv3OperationsMasterIpAddr OBJECT-TYPE  
+        SYNTAX       InetAddress  
+        MAX-ACCESS   read-only  
+        STATUS       current  
+        DESCRIPTION  
+            "The master router's real IP address.  The master router  
+            would set this address to vrrpv3OperationsPrimaryIpAddr  
+            while transitioning to master state.  For backup  
+            routers, this is the IP address listed as the source in 
+            VRRP advertisement last received by this virtual  
+            router."  
+        REFERENCE "RFC 5798" 
+        ::= { vrrpv3OperationsEntry 3 }  
+         
+    vrrpv3OperationsPrimaryIpAddr OBJECT-TYPE  
+        SYNTAX       InetAddress  
+        MAX-ACCESS   read-create
+        STATUS       current  
+        DESCRIPTION  
+            "In the case where there is more than one IP  
+            Address (associated IP addresses) for a given  
+            'ifIndex', this object is used to specify the IP  
+            address that will become the 
+            vrrpv3OperationsMasterIpAddr', should the virtual  
+            router transition from backup state to master."  
+        ::= { vrrpv3OperationsEntry 4 }  
+     
+ 
+    vrrpv3OperationsVirtualMacAddr OBJECT-TYPE  
+        SYNTAX       MacAddress  
+        MAX-ACCESS   read-only  
+        STATUS       current  
+        DESCRIPTION  
+            "The virtual MAC address of the virtual router.  
+            Although this object can be derived from the  
+            'vrrpv3OperationsVrId' object, it is defined so that it  
+            is easily obtainable by a management application and  
+            can be included in VRRP-related SNMP notifications."  
+        ::= { vrrpv3OperationsEntry 5 }  
+     
+    vrrpv3OperationsStatus OBJECT-TYPE  
+        SYNTAX       INTEGER {  
+            initialize(1),  
+            backup(2),  
+            master(3)  
+        }  
+        MAX-ACCESS   read-only  
+        STATUS       current  
+     
+        DESCRIPTION  
+            "The current state of the virtual router.  This object   
+            has three defined values:  
+     
+              - 'initialize', which indicates that the  
+                virtual router is waiting for a startup event.  
+
+              - 'backup', which indicates that the virtual router is  
+                monitoring the availability of the master router.  
+     
+              - 'master', which indicates that the virtual router  
+                is forwarding packets for IP addresses that are  
+                associated with this router."  
+        REFERENCE "RFC 5798" 
+        ::= { vrrpv3OperationsEntry 6 }  
+
+    vrrpv3OperationsPriority OBJECT-TYPE  
+        SYNTAX       Unsigned32 (0..255)  
+        MAX-ACCESS   read-create
+        STATUS       current  
+        DESCRIPTION  
+            "This object specifies the priority to be used for the  
+            virtual router master election process; higher values  
+            imply higher priority.  
+     
+            A priority of '0', although not settable, is sent by  
+            the master router to indicate that this router has  
+            ceased to participate in VRRP, and a backup virtual  
+            router should transition to become a new master.  
+     
+            A priority of 255 is used for the router that owns the  
+            associated IP address(es) for VRRP over IPv4 and hence 
+            is not settable. 
+ 
+            Setting the values of this object to 0 or 255 should be
+            rejected by the agents implementing this MIB module.
+            For example, an SNMP agent would return 'badValue(3)'
+            when a user tries to set the values 0 or 255 for this
+            object."
+
+        REFERENCE "RFC 5798, Section 6.1" 
+        DEFVAL       { 100 }  
+        ::= { vrrpv3OperationsEntry 7 }  
+     
+    vrrpv3OperationsAddrCount OBJECT-TYPE  
+        SYNTAX       Integer32 (0..255)  
+        MAX-ACCESS   read-only  
+        STATUS       current  
+        DESCRIPTION  
+            "The number of IP addresses that are associated with  
+            this virtual router.  This number is equal to the  
+            number of rows in the vrrpv3AssociatedAddrTable that  
+            correspond to a given ifIndex/VRID/IP version."  
+        REFERENCE "RFC 5798, Section 6.1" 
+        ::= { vrrpv3OperationsEntry 8 }   
+     
+    vrrpv3OperationsAdvInterval OBJECT-TYPE  
+        SYNTAX       TimeInterval (1..4095)  
+        UNITS        "centiseconds"  
+        MAX-ACCESS   read-create
+        STATUS       current  
+        DESCRIPTION  
+            "The time interval, in centiseconds, between sending  
+            advertisement messages.  Only the master router sends  
+            VRRP advertisements."  
+        REFERENCE "RFC 5798, Section 6.1" 
+        DEFVAL       { 100}  
+        ::= { vrrpv3OperationsEntry 9 }  
+     
+    vrrpv3OperationsPreemptMode OBJECT-TYPE  
+        SYNTAX       TruthValue  
+        MAX-ACCESS   read-create
+        STATUS       current  
+        DESCRIPTION  
+            "Controls whether a higher priority virtual router will 
+            preempt a lower priority master."  
+        REFERENCE "RFC 5798, Section 6.1" 
+        DEFVAL       { true }  
+        ::= { vrrpv3OperationsEntry 10 } 
+ 
+    vrrpv3OperationsAcceptMode OBJECT-TYPE  
+        SYNTAX       TruthValue  
+        MAX-ACCESS   read-create
+        STATUS       current  
+        DESCRIPTION  
+            "Controls whether a virtual router in master state  
+            will accept packets addressed to the address owner's  
+            IPv6 address as its own if it is not the IPv6 address  
+            owner.  Default is false(2). 
+            This object is not relevant for rows representing VRRP 
+            over IPv4 and should be set to false(2)."  
+        DEFVAL       { false }  
+        ::= { vrrpv3OperationsEntry 11 }   
+     
+    vrrpv3OperationsUpTime OBJECT-TYPE  
+        SYNTAX       TimeTicks  
+        MAX-ACCESS   read-only  
+        STATUS       current  
+        DESCRIPTION  
+            "This value represents the amount of time, in
+            TimeTicks (hundredth of a second), since this virtual  
+            router (i.e., the 'vrrpv3OperationsStatus')  
+            transitioned out of 'initialize'."  
+        REFERENCE "RFC 5798, Section 6.1" 
+        ::= { vrrpv3OperationsEntry 12 }  
+
+    vrrpv3OperationsRowStatus OBJECT-TYPE  
+        SYNTAX       RowStatus  
+        MAX-ACCESS   read-create
+        STATUS       current  
+        DESCRIPTION  
+            "The RowStatus variable should be used in accordance to 
+            installation and removal conventions for conceptual  
+            rows. 
+ 
+            To create a row in this table, a manager sets this  
+            object to either createAndGo(4) or createAndWait(5).  
+            Until instances of all corresponding columns are  
+            appropriately configured, the value of the  
+            corresponding instance of the  
+            'vrrpv3OperationsRowStatus' column will be read as  
+            notReady(3).   
+            In particular, a newly created row cannot be made  
+            active(1) until (minimally) the corresponding instance  
+            of vrrpv3OperationsInetAddrType, vrrpv3OperationsVrId,  
+            and vrrpv3OperationsPrimaryIpAddr has been set, and  
+            there is at least one active row in the  
+            'vrrpv3AssociatedIpAddrTable' defining an associated  
+            IP address. 
+ 
+            notInService(2) should be used to administratively  
+            bring the row down. 
+ 
+            A typical order of operation to add a row is: 
+            1. Create a row in vrrpv3OperationsTable with  
+            createAndWait(5). 
+            2. Create one or more corresponding rows in 
+            vrrpv3AssociatedIpAddrTable. 
+            3. Populate the vrrpv3OperationsEntry. 
+            4. Set vrrpv3OperationsRowStatus to active(1). 
+ 
+            A typical order of operation to delete an entry is: 
+            1. Set vrrpv3OperationsRowStatus to notInService(2). 
+            2. Set the corresponding rows in  
+            vrrpv3AssociatedIpAddrTable to destroy(6) to delete  
+            the entry.  
+            3. Set vrrpv3OperationsRowStatus to destroy(6) to  
+            delete the entry."  
+        ::= { vrrpv3OperationsEntry 13 }  
+ 
+--  VRRP Associated Address Table 
+     
+    vrrpv3AssociatedIpAddrTable OBJECT-TYPE  
+        SYNTAX       SEQUENCE OF Vrrpv3AssociatedIpAddrEntry  
+        MAX-ACCESS   not-accessible  
+        STATUS       current  
+        DESCRIPTION  
+            "The table of addresses associated with each virtual  
+             router."  
+        ::= { vrrpv3Operations 2 }  
+     
+    vrrpv3AssociatedIpAddrEntry OBJECT-TYPE  
+        SYNTAX       Vrrpv3AssociatedIpAddrEntry  
+        MAX-ACCESS   not-accessible  
+        STATUS       current  
+        DESCRIPTION  
+            "An entry in the table contains an IP address that is  
+            associated with a virtual router.  The number of rows  
+            for a given IP version, VrID, and ifIndex will equal  
+            the number of IP addresses associated (e.g., backed up)
+            by the virtual router (equivalent to
+            'vrrpv3OperationsIpAddrCount').  
+     
+            Rows in the table cannot be modified unless the value  
+            of 'vrrpv3OperationsStatus' for the corresponding entry
+            in the vrrpv3OperationsTable has transitioned to  
+            initialize(1). 
+ 
+            The information in this table is persistent and when  
+            written the entity SHOULD save the change to non- 
+            volatile storage." 
+     
+        INDEX    { ifIndex, vrrpv3OperationsVrId,  
+                   vrrpv3OperationsInetAddrType, 
+                   vrrpv3AssociatedIpAddrAddress } 
+
+        ::= { vrrpv3AssociatedIpAddrTable 1 }  
+     
+    Vrrpv3AssociatedIpAddrEntry ::=  
+        SEQUENCE {  
+            vrrpv3AssociatedIpAddrAddress  
+                InetAddress,  
+            vrrpv3AssociatedIpAddrRowStatus  
+                RowStatus  
+    }  
+         
+    vrrpv3AssociatedIpAddrAddress OBJECT-TYPE  
+        SYNTAX       InetAddress (SIZE (0|4|16)) 
+        MAX-ACCESS   not-accessible
+        STATUS       current  
+        DESCRIPTION  
+            "The assigned IP addresses that a virtual router is  
+            responsible for backing up. 
+ 
+            The IP address type is determined by the value of  
+            vrrpv3OperationsInetAddrType in the index of this 
+            row."
+        REFERENCE "RFC 5798"
+        ::= { vrrpv3AssociatedIpAddrEntry 1 }  
+  
+    vrrpv3AssociatedIpAddrRowStatus OBJECT-TYPE  
+        SYNTAX       RowStatus  
+        MAX-ACCESS   read-create
+        STATUS       current  
+        DESCRIPTION  
+            "The row status variable, used according to  
+            installation and removal conventions for conceptual  
+            rows.  To create a row in this table, a manager sets  
+            this object to either createAndGo(4) or  
+            createAndWait(5).  Setting this object to active(1)
+            results in the addition of an associated address for a  
+            virtual router.  Setting this object to notInService(2)
+            results in administratively bringing down the row. 
+ 
+            Destroying the entry or setting it to destroy(6)  
+            removes the associated address from the virtual router. 
+            The use of other values is implementation-dependent. 
+
+            Implementations should not allow deletion of the last 
+            row corresponding to an active row in  
+            vrrpv3OperationsTable. 
+ 
+            Refer to the description of vrrpv3OperationsRowStatus
+            for typical row creation and deletion scenarios."
+        ::= { vrrpv3AssociatedIpAddrEntry 2 }  
+     
+--  VRRP Router Statistics  
+  
+    vrrpv3RouterChecksumErrors OBJECT-TYPE  
+        SYNTAX       Counter64  
+        MAX-ACCESS   read-only  
+        STATUS       current  
+        DESCRIPTION  
+            "The total number of VRRP packets received with an 
+            invalid VRRP checksum value. 
+ 
+            Discontinuities in the value of this counter can occur  
+            at re-initialization of the management system, and at  
+            other times as indicated by the value of  
+            vrrpv3GlobalStatisticsDiscontinuityTime." 
+  
+        REFERENCE "RFC 5798, Section 5.2.8"
+        ::= { vrrpv3Statistics 1 }  
+     
+    vrrpv3RouterVersionErrors OBJECT-TYPE  
+        SYNTAX       Counter64  
+        MAX-ACCESS   read-only  
+        STATUS       current  
+        DESCRIPTION  
+            "The total number of VRRP packets received with an  
+            unknown or unsupported version number. 
+ 
+            Discontinuities in the value of this counter can occur  
+            at re-initialization of the management system, and at  
+            other times as indicated by the value of  
+            vrrpv3GlobalStatisticsDiscontinuityTime."  
+ 
+        REFERENCE "RFC 5798, Section 5.2.1"
+        ::= { vrrpv3Statistics 2 }  
+     
+    vrrpv3RouterVrIdErrors OBJECT-TYPE  
+        SYNTAX       Counter64  
+        MAX-ACCESS   read-only  
+       STATUS       current  
+        DESCRIPTION  
+            "The total number of VRRP packets received with a 
+             VRID that is not valid for any virtual router on this 
+             router. 
+ 
+            Discontinuities in the value of this counter can occur  
+            at re-initialization of the management system, and at  
+            other times as indicated by the value of  
+            vrrpv3GlobalStatisticsDiscontinuityTime."  
+ 
+        REFERENCE "RFC 5798, Section 5.2.3"
+        ::= { vrrpv3Statistics 3 }  
+ 
+   vrrpv3GlobalStatisticsDiscontinuityTime OBJECT-TYPE  
+       SYNTAX     TimeStamp  
+       MAX-ACCESS read-only  
+       STATUS     current  
+       DESCRIPTION  
+           "The value of sysUpTime on the most recent occasion at  
+            which one of vrrpv3RouterChecksumErrors,  
+            vrrpv3RouterVersionErrors, and vrrpv3RouterVrIdErrors
+            suffered a discontinuity. 
+     
+            If no such discontinuities have occurred since the last 
+            re-initialization of the local management subsystem,  
+            then this object contains a zero value." 
+     
+       ::= { vrrpv3Statistics 4 }  
+ 
+--  VRRP Router Statistics Table  
+
+    vrrpv3StatisticsTable OBJECT-TYPE  
+        SYNTAX       SEQUENCE OF Vrrpv3StatisticsEntry  
+        MAX-ACCESS   not-accessible  
+        STATUS       current  
+        DESCRIPTION  
+            "Table of virtual router statistics."  
+        ::= { vrrpv3Statistics 5 }  
+     
+    vrrpv3StatisticsEntry OBJECT-TYPE  
+        SYNTAX       Vrrpv3StatisticsEntry  
+        MAX-ACCESS   not-accessible  
+        STATUS       current  
+        DESCRIPTION  
+            "An entry in the table containing statistics
+            information about a given virtual router."  
+        AUGMENTS    { vrrpv3OperationsEntry }  
+        ::= { vrrpv3StatisticsTable 1 }  
+ 
+    Vrrpv3StatisticsEntry ::=  
+        SEQUENCE {  
+            vrrpv3StatisticsMasterTransitions   
+                Counter32, 
+            vrrpv3StatisticsNewMasterReason 
+                INTEGER, 
+            vrrpv3StatisticsRcvdAdvertisements  
+                Counter64,  
+            vrrpv3StatisticsAdvIntervalErrors  
+                Counter64,  
+            vrrpv3StatisticsIpTtlErrors  
+                Counter64,  
+            vrrpv3StatisticsProtoErrReason 
+                INTEGER, 
+            vrrpv3StatisticsRcvdPriZeroPackets  
+                Counter64,  
+            vrrpv3StatisticsSentPriZeroPackets  
+                Counter64,  
+            vrrpv3StatisticsRcvdInvalidTypePackets  
+                Counter64,  
+            vrrpv3StatisticsAddressListErrors  
+                Counter64,  
+            vrrpv3StatisticsPacketLengthErrors  
+                Counter64,  
+            vrrpv3StatisticsRowDiscontinuityTime  
+                 TimeStamp,  
+            vrrpv3StatisticsRefreshRate 
+                 Unsigned32 
+        }  
+
+    vrrpv3StatisticsMasterTransitions OBJECT-TYPE  
+        SYNTAX       Counter32  
+        MAX-ACCESS   read-only  
+        STATUS       current  
+        DESCRIPTION  
+            "The total number of times that this virtual router's  
+            state has transitioned to master state.
+     
+            Discontinuities in the value of this counter can occur  
+            at re-initialization of the management system, and at  
+            other times as indicated by the value of  
+            vrrpv3StatisticsRowDiscontinuityTime."  
+        ::= { vrrpv3StatisticsEntry 1 }  
+ 
+   vrrpv3StatisticsNewMasterReason OBJECT-TYPE  
+        SYNTAX        INTEGER { 
+            notMaster (0),  
+            priority  (1),  
+            preempted (2),  
+            masterNoResponse (3)  
+        }  
+        MAX-ACCESS   read-only  
+        STATUS       current  
+        DESCRIPTION  
+            "This indicates the reason for the virtual router to  
+            transition to master state.  If the virtual router
+            never transitioned to master state, the value of this
+            object is notMaster(0).  Otherwise, this indicates the
+            reason this virtual router transitioned to master
+            state the last time.  Used by vrrpv3NewMaster
+            notification."
+        ::= { vrrpv3StatisticsEntry 2 }  
+ 
+    vrrpv3StatisticsRcvdAdvertisements OBJECT-TYPE  
+        SYNTAX       Counter64  
+        MAX-ACCESS   read-only  
+        STATUS       current  
+        DESCRIPTION  
+            "The total number of VRRP advertisements received by  
+            this virtual router.   
+     
+            Discontinuities in the value of this counter can occur  
+            at re-initialization of the management system, and at  
+            other times as indicated by the value of  
+            vrrpv3StatisticsRowDiscontinuityTime."  
+
+        ::= { vrrpv3StatisticsEntry 3 }  
+     
+    vrrpv3StatisticsAdvIntervalErrors OBJECT-TYPE  
+        SYNTAX       Counter64  
+        MAX-ACCESS   read-only  
+        STATUS       current  
+        DESCRIPTION  
+            "The total number of VRRP advertisement packets  
+            received for which the advertisement interval is  
+            different from the vrrpv3OperationsAdvInterval  
+            configured on this virtual router. 
+     
+            Discontinuities in the value of this counter can occur  
+            at re-initialization of the management system, and at  
+            other times as indicated by the value of  
+            vrrpv3StatisticsRowDiscontinuityTime."  
+     
+        ::= { vrrpv3StatisticsEntry 4 }  
+     
+    vrrpv3StatisticsIpTtlErrors OBJECT-TYPE  
+        SYNTAX       Counter64  
+        MAX-ACCESS   read-only  
+        STATUS       current   
+        DESCRIPTION  
+            "The total number of VRRP packets received by the  
+            virtual router with IPv4 TTL (for VRRP over IPv4) or
+            IPv6 Hop Limit (for VRRP over IPv6) not equal to 255. 
+     
+            Discontinuities in the value of this counter can occur  
+            at re-initialization of the management system, and at  
+            other times as indicated by the value of  
+            vrrpv3StatisticsRowDiscontinuityTime."  
+        REFERENCE "RFC 5798, Section 5.1.1.3"
+        ::= { vrrpv3StatisticsEntry 5 } 
+ 
+   vrrpv3StatisticsProtoErrReason OBJECT-TYPE  
+        SYNTAX        INTEGER {  
+            noError (0),  
+            ipTtlError (1),  
+            versionError  (2),  
+            checksumError (3),  
+            vrIdError(4)  
+        }  
+        MAX-ACCESS   read-only  
+        STATUS       current  
+        DESCRIPTION  
+            "This indicates the reason for the last protocol
+            error.  This SHOULD be set to noError(0) when no
+            protocol errors are encountered.  Used by
+            vrrpv3ProtoError notification."
+        ::= { vrrpv3StatisticsEntry 6 }  
+ 
+    vrrpv3StatisticsRcvdPriZeroPackets OBJECT-TYPE  
+        SYNTAX       Counter64  
+        MAX-ACCESS   read-only  
+        STATUS       current  
+        DESCRIPTION  
+            "The total number of VRRP packets received by the  
+            virtual router with a priority of '0'.   
+     
+            Discontinuities in the value of this counter can occur  
+            at re-initialization of the management system, and at  
+            other times as indicated by the value of  
+            vrrpv3StatisticsRowDiscontinuityTime."  
+        REFERENCE "RFC 5798, Section 5.2.4"
+        ::= { vrrpv3StatisticsEntry 7 }  
+     
+    vrrpv3StatisticsSentPriZeroPackets OBJECT-TYPE  
+        SYNTAX       Counter64  
+        MAX-ACCESS   read-only  
+        STATUS       current  
+        DESCRIPTION  
+            "The total number of VRRP packets sent by the virtual  
+            router with a priority of '0'.   
+     
+            Discontinuities in the value of this counter can occur  
+            at re-initialization of the management system, and at  
+            other times as indicated by the value of  
+            vrrpv3StatisticsRowDiscontinuityTime."  
+        REFERENCE "RFC 5798, Section 5.2.4" 
+        ::= { vrrpv3StatisticsEntry 8 }  
+     
+    vrrpv3StatisticsRcvdInvalidTypePackets OBJECT-TYPE  
+        SYNTAX       Counter64  
+        MAX-ACCESS   read-only  
+        STATUS       current  
+        DESCRIPTION  
+            "The number of VRRP packets received by the virtual  
+            router with an invalid value in the 'type' field.   
+     
+            Discontinuities in the value of this counter can occur  
+            at re-initialization of the management system, and at  
+            other times as indicated by the value of  
+            vrrpv3StatisticsRowDiscontinuityTime."   
+        ::= { vrrpv3StatisticsEntry 9 }  
+
+    vrrpv3StatisticsAddressListErrors OBJECT-TYPE  
+        SYNTAX       Counter64  
+        MAX-ACCESS   read-only  
+        STATUS       current  
+        DESCRIPTION  
+            "The total number of packets received for which the  
+            address list does not match the locally configured 
+            list for the virtual router.   
+     
+            Discontinuities in the value of this counter can occur  
+            at re-initialization of the management system, and at  
+            other times as indicated by the value of  
+            vrrpv3StatisticsRowDiscontinuityTime."  
+        ::= { vrrpv3StatisticsEntry 10 }  
+     
+    vrrpv3StatisticsPacketLengthErrors OBJECT-TYPE  
+        SYNTAX       Counter64  
+        MAX-ACCESS   read-only  
+        STATUS       current  
+        DESCRIPTION  
+            "The total number of packets received with a packet  
+            length less than the length of the VRRP header.   
+     
+            Discontinuities in the value of this counter can occur  
+            at re-initialization of the management system, and at  
+            other times as indicated by the value of  
+            vrrpv3StatisticsRowDiscontinuityTime."  
+        ::= { vrrpv3StatisticsEntry 11 }  
+  
+   vrrpv3StatisticsRowDiscontinuityTime OBJECT-TYPE  
+       SYNTAX     TimeStamp  
+       MAX-ACCESS read-only  
+       STATUS     current  
+       DESCRIPTION  
+           "The value of sysUpTime on the most recent occasion at  
+            which any one or more of this entry's counters
+            suffered a discontinuity.
+     
+            If no such discontinuities have occurred since the last 
+            re-initialization of the local management subsystem,  
+            then this object contains a zero value." 
+       ::= { vrrpv3StatisticsEntry 12 }  
+     
+   vrrpv3StatisticsRefreshRate OBJECT-TYPE  
+       SYNTAX     Unsigned32  
+       UNITS "milliseconds"  
+       MAX-ACCESS read-only 
+       STATUS     current  
+       DESCRIPTION  
+           "The minimum reasonable polling interval for this entry. 
+            This object provides an indication of the minimum  
+            amount of time required to update the counters in this
+            entry." 
+       ::= { vrrpv3StatisticsEntry 13 }  
+
+--   Notification Definitions  
+--   Notifications may be controlled using SNMP-NOTIFICATION-MIB 
+       
+    vrrpv3NewMaster NOTIFICATION-TYPE  
+        OBJECTS      {  
+                       vrrpv3OperationsMasterIpAddr,  
+                       vrrpv3StatisticsNewMasterReason  
+                     }  
+        STATUS       current  
+        DESCRIPTION  
+            "The newMaster notification indicates that the sending 
+            agent has transitioned to master state."
+        ::= { vrrpv3Notifications 1 }  
+    
+    vrrpv3ProtoError NOTIFICATION-TYPE  
+        OBJECTS      {  
+                       vrrpv3StatisticsProtoErrReason  
+                     }  
+        STATUS       current  
+        DESCRIPTION  
+            "The notification indicates that the sending agent has  
+            encountered the protocol error indicated by  
+            vrrpv3StatisticsProtoErrReason."  
+        ::= { vrrpv3Notifications 2 }  
+ 
+--  Conformance Information  
+ 
+   vrrpv3Compliances  OBJECT IDENTIFIER ::= { vrrpv3Conformance 1 } 
+   vrrpv3Groups       OBJECT IDENTIFIER ::= { vrrpv3Conformance 2 } 
+     
+-- Compliance Statements  
+
+    vrrpv3FullCompliance MODULE-COMPLIANCE  
+        STATUS current  
+        DESCRIPTION  
+           "The compliance statement"  
+        MODULE -- this module  
+        MANDATORY-GROUPS  {  
+            vrrpv3OperationsGroup,  
+            vrrpv3StatisticsGroup,  
+            vrrpv3InfoGroup,  
+            vrrpv3NotificationsGroup  
+        }  
+        OBJECT        vrrpv3OperationsPriority 
+        WRITE-SYNTAX  Unsigned32 (1..254) 
+        DESCRIPTION  "Setable values are from 1 to 254." 
+        ::= { vrrpv3Compliances 1 }    
+  
+    vrrpv3ReadOnlyCompliance MODULE-COMPLIANCE  
+        STATUS current  
+        DESCRIPTION  
+           "When this MIB module is implemented without support
+           for read-create (i.e., in read-only mode), then such
+           an implementation can claim read-only compliance.
+           Such a device can then be monitored, but cannot be
+           configured with this MIB."
+     
+        MODULE -- this module  
+        MANDATORY-GROUPS  {  
+            vrrpv3OperationsGroup,  
+            vrrpv3StatisticsGroup, 
+            vrrpv3StatisticsDiscontinuityGroup, 
+            vrrpv3InfoGroup,  
+            vrrpv3NotificationsGroup  
+        }  
+     
+        OBJECT        vrrpv3OperationsPriority 
+        MIN-ACCESS    read-only 
+        DESCRIPTION  "Write access is not required." 
+
+        OBJECT        vrrpv3OperationsPrimaryIpAddr 
+        MIN-ACCESS    read-only 
+        DESCRIPTION  "Write access is not required." 
+        OBJECT        vrrpv3OperationsAdvInterval 
+        MIN-ACCESS    read-only 
+        DESCRIPTION  "Write access is not required." 
+ 
+        OBJECT        vrrpv3OperationsPreemptMode 
+        MIN-ACCESS    read-only 
+        DESCRIPTION  "Write access is not required." 
+ 
+        OBJECT        vrrpv3OperationsAcceptMode 
+        MIN-ACCESS    read-only 
+        DESCRIPTION  "Write access is not required." 
+
+        OBJECT        vrrpv3OperationsRowStatus 
+        MIN-ACCESS    read-only 
+        DESCRIPTION  "Write access is not required." 
+
+        OBJECT        vrrpv3AssociatedIpAddrRowStatus 
+        MIN-ACCESS    read-only 
+        DESCRIPTION  "Write access is not required." 
+
+        ::= { vrrpv3Compliances 2 } 
+
+-- Conformance Groups  
+ 
+    vrrpv3OperationsGroup   OBJECT-GROUP  
+        OBJECTS  {  
+            vrrpv3OperationsVirtualMacAddr,  
+            vrrpv3OperationsStatus,  
+            vrrpv3OperationsPriority,  
+            vrrpv3OperationsMasterIpAddr, 
+            vrrpv3OperationsAdvInterval,  
+            vrrpv3OperationsPreemptMode,  
+            vrrpv3OperationsAcceptMode, 
+            vrrpv3OperationsUpTime, 
+            vrrpv3OperationsRowStatus,  
+            vrrpv3OperationsAddrCount,  
+            vrrpv3OperationsPrimaryIpAddr, 
+            vrrpv3AssociatedIpAddrRowStatus  
+            }  
+        STATUS current  
+        DESCRIPTION  
+           "Conformance group for VRRPv3 operations."  
+        ::= { vrrpv3Groups 1 }  
+ 
+    vrrpv3StatisticsGroup  OBJECT-GROUP  
+        OBJECTS  {  
+            vrrpv3RouterChecksumErrors,  
+            vrrpv3RouterVersionErrors,  
+            vrrpv3RouterVrIdErrors,  
+            vrrpv3StatisticsMasterTransitions, 
+            vrrpv3StatisticsNewMasterReason,  
+            vrrpv3StatisticsRcvdAdvertisements,  
+            vrrpv3StatisticsAdvIntervalErrors,  
+            vrrpv3StatisticsRcvdPriZeroPackets,  
+            vrrpv3StatisticsSentPriZeroPackets,  
+            vrrpv3StatisticsRcvdInvalidTypePackets,  
+            vrrpv3StatisticsIpTtlErrors, 
+            vrrpv3StatisticsProtoErrReason, 
+            vrrpv3StatisticsAddressListErrors,   
+            vrrpv3StatisticsPacketLengthErrors,  
+            vrrpv3StatisticsRowDiscontinuityTime,  
+            vrrpv3StatisticsRefreshRate 
+            }  
+        STATUS current  
+        DESCRIPTION  
+           "Conformance group for VRRPv3 statistics."  
+        ::= { vrrpv3Groups 2 }  
+ 
+    vrrpv3StatisticsDiscontinuityGroup  OBJECT-GROUP  
+        OBJECTS  {  
+            vrrpv3GlobalStatisticsDiscontinuityTime 
+            }  
+        STATUS current  
+        DESCRIPTION  
+           "Objects providing information about counter
+            discontinuities."  
+        ::= { vrrpv3Groups 3 }  
+ 
+    vrrpv3InfoGroup  OBJECT-GROUP  
+        OBJECTS  {  
+            vrrpv3StatisticsProtoErrReason, 
+            vrrpv3StatisticsNewMasterReason 
+            }  
+        STATUS current  
+        DESCRIPTION  
+           "Conformance group for objects contained in VRRPv3
+            notifications."  
+        ::= { vrrpv3Groups 4 }  
+     
+    vrrpv3NotificationsGroup NOTIFICATION-GROUP  
+        NOTIFICATIONS {  
+            vrrpv3NewMaster,  
+            vrrpv3ProtoError  
+            }  
+        STATUS current  
+        DESCRIPTION  
+           "The VRRP MIB Notification Group."  
+        ::= { vrrpv3Groups 5 }  
+     
+END