Initial commitHEADmain

1 files changed, 1276 insertions, 0 deletions

diff --git a/MIBS/SMON-MIB b/MIBS/SMON-MIB
new file mode 100644
index 0000000..5677f8f
--- /dev/null
+++ b/MIBS/SMON-MIB
@@ -0,0 +1,1276 @@
+-- *****************************************************************
+-- SMON-MIB.my
+-- Remote Monitoring Extensions for Ethernet Switches
+-- from draft-ietf-rmonmib-smon-07.txt
+--
+-- April 1999, Andy Bierman
+--
+-- Copyright (c) 1998 - 1999 by cisco Systems, Inc.
+-- All rights reserved.
+-- *****************************************************************
+--
+
+   SMON-MIB DEFINITIONS ::= BEGIN
+
+   IMPORTS
+        MODULE-IDENTITY, OBJECT-TYPE, Counter32,
+        Integer32, Counter64
+                FROM SNMPv2-SMI
+        RowStatus, TEXTUAL-CONVENTION
+                FROM SNMPv2-TC
+        rmon, OwnerString
+                FROM RMON-MIB
+        LastCreateTime, DataSource, rmonConformance, probeConfig
+                FROM RMON2-MIB
+        InterfaceIndex
+                FROM IF-MIB
+        MODULE-COMPLIANCE, OBJECT-GROUP
+                FROM SNMPv2-CONF;
+
+   switchRMON MODULE-IDENTITY
+        LAST-UPDATED "9812160000Z"
+        ORGANIZATION "IETF RMON MIB Working Group"
+        CONTACT-INFO
+        "IETF RMONMIB WG Mailing list: rmonmib@cisco.com
+
+                Rich Waterman
+                Allot Networks Inc.
+                Tel:  +1-408-559-0253
+                Email: rich@allot.com
+
+                Bill Lahaye
+                Xylan Corp.
+                Tel: +1-800-995-2612
+                Email:  lahaye@ctron.com
+
+                Dan Romascanu
+                Lucent Technologies
+                Tel:  +972-3-645-8414
+                Email: dromasca@lucent.com
+
+                Steven Waldbusser
+                International Network Services
+                Tel: +1-415-254-4251
+                Email: waldbusser@ins.com"
+
+        DESCRIPTION
+                "The MIB module for managing remote monitoring device
+                 implementations for Switched Networks"
+        ::= { rmon 22 }
+
+   smonMIBObjects OBJECT IDENTIFIER ::= { switchRMON 1 }
+
+   dataSourceCaps          OBJECT IDENTIFIER ::= {smonMIBObjects 1}
+   smonStats               OBJECT IDENTIFIER ::= {smonMIBObjects 2}
+   portCopyConfig          OBJECT IDENTIFIER ::= {smonMIBObjects 3}
+   smonRegistrationPoints  OBJECT IDENTIFIER ::= {smonMIBObjects 4}
+
+   -- Textual Conventions
+   --
+
+   SmonDataSource ::= TEXTUAL-CONVENTION
+    STATUS        current
+    DESCRIPTION
+        "Identifies the source of the data that the associated function
+         is configured to analyze. This Textual Convention
+         extends the DataSource Textual Convention defined by RMON 2
+         to the following data source types:
+
+         - ifIndex.<I>
+         DataSources of this traditional form are called 'port-based',
+         but only if ifType.<I> is not equal to 'propVirtual(53)'.
+
+         - smonVlanDataSource.<V>
+         A dataSource of this form refers to a 'Packet-based VLAN'
+         and is called a 'VLAN-based' dataSource. <V> is the VLAN
+         ID as defined by the IEEE 802.1Q standard [19]. The
+         value is between 1 and 4094 inclusive, and it represents
+         an 802.1Q VLAN-ID with global scope within a given
+         bridged domain, as defined by [19].
+
+        - entPhysicalEntry.<N>
+         A dataSource of this form refers to a physical entity within
+         the agent (e.g. entPhysicalClass = backplane(4)) and is called
+         an 'entity-based' dataSource."
+    SYNTAX      OBJECT IDENTIFIER
+
+   -- The smonCapabilities object describes SMON agent capabilities.
+
+   smonCapabilities OBJECT-TYPE
+    SYNTAX BITS {
+      smonVlanStats(0),
+      smonPrioStats(1),
+      dataSource(2),
+      smonUnusedBit(3),
+      portCopy(4)
+      }
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "An indication of the SMON MIB groups supported
+         by this agent."
+    ::= { probeConfig  15 }
+
+   -- dataSourceCaps MIB group - defines SMON data source and port
+   -- copy capabilities for devices supporting SMON.
+
+   -- A NMS application will check this MIB group and retrieve
+   -- information about the SMON capabilities of the device before
+   -- applying SMON control operations to the device.
+
+
+   -- dataSourceCapsTable: defines capabilities of RMON data sources
+
+   dataSourceCapsTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF DataSourceCapsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table describes RMON data sources and port copy
+        capabilities. An NMS MAY use this table to discover the
+        identity and attributes of the data sources on a given agent
+        implementation. Similar to the probeCapabilities object,
+        actual row-creation operations will succeed or fail based on
+        the resources available and parameter values used in each
+        row-creation operation.
+
+        Upon restart of the RMON agent, the dataSourceTable, ifTable,
+        and perhaps entPhysicalTable are initialized for the available
+        dataSources.
+
+        For each dataSourceCapsEntry representing a VLAN or
+        entPhysicalEntry the agent MUST create an associated ifEntry
+        with a ifType value of 'propVirtual(53)'. This ifEntry will be
+        used as the actual value in RMON control table dataSource
+        objects. The assigned ifIndex value is copied into the
+        associated dataSourceCapsIfIndex object.
+        It is understood that dataSources representing VLANs may not
+        always be instantiated immediately upon restart, but rather as
+        VLAN usage is detected by the agent. The agent SHOULD attempt
+        to create dataSource and interface entries for all dataSources
+        as soon as possible."
+   ::= { dataSourceCaps 1 }
+
+   dataSourceCapsEntry  OBJECT-TYPE
+    SYNTAX      DataSourceCapsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Entries per data source containing descriptions of data
+         source and port copy capabilities. This table is populated by
+         the SMON agent with one entry for each supported data
+         source."
+   INDEX { IMPLIED dataSourceCapsObject }
+   ::= { dataSourceCapsTable 1 }
+
+   DataSourceCapsEntry ::= SEQUENCE {
+        dataSourceCapsObject
+                SmonDataSource,
+        dataSourceRmonCaps
+                BITS,
+        dataSourceCopyCaps
+                BITS,
+        dataSourceCapsIfIndex
+                InterfaceIndex
+        }
+
+   dataSourceCapsObject OBJECT-TYPE
+    SYNTAX      SmonDataSource
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Defines an object that can be a SMON data source or a
+          source or a destination for a port copy operation."
+    ::= { dataSourceCapsEntry 1  }
+
+   dataSourceRmonCaps OBJECT-TYPE
+    SYNTAX BITS {
+           countErrFrames(0),
+           countAllGoodFrames(1),
+           countAnyRmonTables(2),
+           babyGiantsCountAsGood(3)
+           }
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        " General attributes of the specified dataSource. Note that
+        these are static attributes, which SHOULD NOT be adjusted
+        because of current resources or configuration.
+
+      - countErrFrames(0)
+          The agent sets this bit for the dataSource if errored frames
+          received on this dataSource can actually be monitored by the
+          agent The agent clears this bit if any errored frames are
+          not visible to the RMON data collector.
+
+      - countAllGoodFrames(1)
+          The agent sets this bit for the dataSource if all good
+          frames received on this dataSource can actually be monitored
+          by the agent. The agent clears this bit if any good frames
+          are not visible for RMON collection, e.g., the dataSource is
+          a non-promiscuous interface or an internal switch interface
+          which may not receive frames which were switched in hardware
+          or dropped by the bridge forwarding function.
+
+      - countAnyRmonTables(2)
+          The agent sets this bit if this dataSource can actually be
+          used in any of the implemented RMON tables, resources
+          notwithstanding. The agent clears this bit if this
+          dataSourceCapsEntry is present simply to identify a
+          dataSource that may only be used as portCopySource and/or a
+          portCopyDest, but not the source of an actual RMON data
+          collection.
+
+      - babyGiantsCountAsGood(3)
+          The agent sets this bit if it can distinguish, for counting
+          purposes, between true giant frames and frames that exceed
+          Ethernet maximum frame size 1518 due to VLAN tagging ('baby
+          giants'). Specifically, this BIT means that frames up to
+          1522 octets are counted as good.
+
+          Agents not capable of detecting 'baby giants' will clear
+          this bit and will view all frames less than or equal to 1518
+          octets as 'good frames' and all frames larger than 1518
+          octets as 'bad frames' for the purpose of counting in the
+          smonVlanIdStats and smonPrioStats tables.
+
+          Agents capable of detecting 'baby giants' SHALL consider
+          them as 'good frames' for the purpose of counting in the
+          smonVlanIdStats and smonPrioStats tables."
+
+    ::= { dataSourceCapsEntry 2  }
+   dataSourceCopyCaps OBJECT-TYPE
+    SYNTAX BITS {
+        copySourcePort(0),
+        copyDestPort(1),
+        copySrcTxTraffic(2),
+        copySrcRxTraffic(3),
+        countDestDropEvents(4),
+        copyErrFrames(5),
+        copyUnalteredFrames(6),
+        copyAllGoodFrames(7)
+        }
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "PortCopy function capabilities of the specified dataSource.
+    Note that these are static capabilities, which SHOULD NOT be
+    adjusted because of current resources or configuration.
+
+      - copySourcePort(0)
+          The agent sets this bit if this dataSource is capable of
+          acting as a source of a portCopy operation. The agent clears
+          this bit otherwise.
+
+      - copyDestPort(1)
+          The agent sets this bit if this dataSource is capable of
+          acting as a destination of a portCopy operation. The agent
+          clears this bit otherwise.
+
+     - copySrcTxTraffic(2)
+          If the copySourcePort bit is set:
+                The agent sets this bit if this dataSource is capable of
+              copying frames transmitted out this portCopy source. The
+              agent clears this bit otherwise. This function is needed
+              to support full-duplex ports.
+           Else:
+               this bit SHOULD be cleared.
+
+      - copySrcRxTraffic(3)
+          If the copySourcePort bit is set:
+            The agent sets this bit if this dataSource is capable of
+            copying frames received on this portCopy source. The agent
+            clears this bit otherwise. This function is needed to
+            support full-duplex ports.
+          Else:
+            this bit SHOULD be cleared.
+
+      - countDestDropEvents(4)
+          If the copyDestPort bit is set:
+              The agent sets this bit if it is capable of incrementing
+              portCopyDestDropEvents, when this dataSource is the
+              target of a portCopy operation and a frame destined to
+              this dataSource is dropped (for RMON counting purposes).
+          Else:
+              this BIT SHOULD be cleared.
+
+      - copyErrFrames(5)
+          If the copySourcePort bit is set:
+              The agent sets this bit if it is capable of copying all
+              errored frames from this portCopy source-port, for
+              errored frames received on this dataSource.
+          Else:
+              this BIT SHOULD be cleared.
+
+      - copyUnalteredFrames(6)
+          If the copySourcePort bit is set:
+              The agent sets the copyUnalteredFrames bit If it is
+              capable of copying all frames from this portCopy
+              source-port without alteration in any way;
+          Else:
+              this bit SHOULD be cleared.
+
+      - copyAllGoodFrames(7)
+          If the copySourcePort bit is set:
+              The agent sets this bit for the dataSource if all good
+              frames received on this dataSource are normally capable
+              of being copied by the agent. The agent clears this bit
+              if any good frames are not visible for the RMON portCopy
+              operation, e.g., the dataSource is a non-promiscuous
+              interface or an internal switch interface which may not
+              receive frames which were switched in hardware or
+              dropped by the bridge forwarding function.
+           Else:
+              this bit SHOULD be cleared."
+
+    ::= { dataSourceCapsEntry 3  }
+
+   dataSourceCapsIfIndex OBJECT-TYPE
+   SYNTAX       InterfaceIndex
+   MAX-ACCESS   read-only
+   STATUS       current
+   DESCRIPTION
+        "This object contains the ifIndex value of the ifEntry
+         associated with this smonDataSource. The agent MUST create
+         'propVirtual' ifEntries for each dataSourceCapsEntry of type
+         VLAN or entPhysicalEntry."
+    ::= { dataSourceCapsEntry 4  }
+
+   -- The SMON Statistics MIB Group
+
+   -- aggregated statistics for IEEE 802.1Q VLAN environments.
+
+   -- VLAN statistics can be gathered by configuring smonVlanIdStats
+   -- and/or smonPrioStats collections. These functions allow a
+   -- VLAN-ID or user priority distributions per dataSource,
+   -- auto-populated by the agent in a manner similar to the RMON
+   -- hostTable.
+
+   -- Only good frames are counted in the tables described in this
+   -- section.
+
+   -- VLAN ID Stats
+
+   -- smonVlanStatsControlTable allows configuration of VLAN-ID
+   -- collections.
+
+   smonVlanStatsControlTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF SmonVlanStatsControlEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+
+        "Controls the setup of VLAN statistics tables.
+
+         The statistics collected represent a distribution based on
+         the IEEE 802.1Q VLAN-ID (VID), for each good frame attributed
+         to the data source for the collection."
+    ::= { smonStats 1 }
+
+   smonVlanStatsControlEntry OBJECT-TYPE
+    SYNTAX      SmonVlanStatsControlEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A conceptual row in the smonVlanStatsControlTable."
+    INDEX { smonVlanStatsControlIndex }
+    ::= { smonVlanStatsControlTable 1 }
+
+   SmonVlanStatsControlEntry ::= SEQUENCE {
+    smonVlanStatsControlIndex                 Integer32,
+    smonVlanStatsControlDataSource           DataSource,
+    smonVlanStatsControlCreateTime       LastCreateTime,
+    smonVlanStatsControlOwner               OwnerString,
+    smonVlanStatsControlStatus                RowStatus
+   }
+
+   smonVlanStatsControlIndex OBJECT-TYPE
+    SYNTAX      Integer32 (1..65535)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A unique arbitrary index for this smonVlanStatsControlEntry."
+    ::= { smonVlanStatsControlEntry 1 }
+
+   smonVlanStatsControlDataSource OBJECT-TYPE
+    SYNTAX      DataSource
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The source of data for this set of VLAN statistics.
+
+        This object MAY NOT be modified if the associated
+        smonVlanStatsControlStatus object is equal to active(1)."
+    ::= { smonVlanStatsControlEntry 2 }
+
+   smonVlanStatsControlCreateTime OBJECT-TYPE
+    SYNTAX     LastCreateTime
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The value of sysUpTime when this control entry was last
+        activated. This object allows to a management station to
+        detect deletion and recreation cycles between polls."
+    ::= { smonVlanStatsControlEntry 3 }
+
+   smonVlanStatsControlOwner OBJECT-TYPE
+
+    SYNTAX      OwnerString
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Administratively assigned named of the owner of this entry.
+        It usually defines the entity that created this entry and is
+        therefore using the resources assigned to it, though there is
+        no enforcement mechanism, nor assurance that rows created are
+        ever used."
+    ::= { smonVlanStatsControlEntry 4 }
+
+   smonVlanStatsControlStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The status of this row.
+
+        An entry MAY NOT exist in the active state unless all
+        objects in the entry have an appropriate value.
+
+        If this object is not equal to active(1), all associated
+        entries in the smonVlanIdStatsTable SHALL be deleted."
+    ::= { smonVlanStatsControlEntry 5 }
+
+   -- The VLAN Statistics Table
+
+   smonVlanIdStatsTable  OBJECT-TYPE
+    SYNTAX     SEQUENCE OF SmonVlanIdStatsEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "Contains the VLAN statistics data.
+         The statistics collected represent a distribution based
+         on the IEEE 802.1Q VLAN-ID (VID), for each good frame
+         attributed to the data source for the collection.
+
+         This function applies the same rules for attributing frames
+         to VLAN-based collections. RMON VLAN statistics are collected
+         after the Ingress Rules defined in section 3.13 of the VLAN
+         Specification [20] are applied.
+
+         It is possible that entries in this table will be
+         garbage-collected, based on agent resources, and VLAN
+         configuration. Agents are encouraged to support all 4094
+         index values and not garbage collect this table."
+   ::= { smonStats 2 }
+
+   smonVlanIdStatsEntry  OBJECT-TYPE
+    SYNTAX     SmonVlanIdStatsEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A conceptual row in smonVlanIdStatsTable."
+    INDEX { smonVlanStatsControlIndex, smonVlanIdStatsId }
+    ::= { smonVlanIdStatsTable 1 }
+
+   SmonVlanIdStatsEntry ::= SEQUENCE {
+    smonVlanIdStatsId                             Integer32,
+    smonVlanIdStatsTotalPkts                      Counter32,
+    smonVlanIdStatsTotalOverflowPkts              Counter32,
+    smonVlanIdStatsTotalHCPkts                    Counter64,
+    smonVlanIdStatsTotalOctets                    Counter32,
+    smonVlanIdStatsTotalOverflowOctets            Counter32,
+    smonVlanIdStatsTotalHCOctets                  Counter64,
+    smonVlanIdStatsNUcastPkts                     Counter32,
+    smonVlanIdStatsNUcastOverflowPkts             Counter32,
+    smonVlanIdStatsNUcastHCPkts                   Counter64,
+    smonVlanIdStatsNUcastOctets                   Counter32,
+    smonVlanIdStatsNUcastOverflowOctets           Counter32,
+    smonVlanIdStatsNUcastHCOctets                 Counter64,
+    smonVlanIdStatsCreateTime                     LastCreateTime
+   }
+
+   smonVlanIdStatsId OBJECT-TYPE
+    SYNTAX     Integer32 (1..4094)
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "The unique identifier of the VLAN monitored for
+         this specific statistics collection.
+
+        Tagged packets match the VID for the range between 1 and 4094.
+        An external RMON probe MAY detect VID=0 on an Inter Switch
+        Link, in which case the packet belongs to a VLAN determined by
+        the PVID of the ingress port. The VLAN to which such a packet
+        belongs can be determined only by a RMON probe internal to the
+        switch."
+    REFERENCE
+        "Draft Standard for Virtual Bridged Local Area Networks,
+          P802.1Q/D10, chapter 3.13"
+    ::= { smonVlanIdStatsEntry 1 }
+
+   smonVlanIdStatsTotalPkts OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS "packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The total number of packets counted on this VLAN."
+    ::= { smonVlanIdStatsEntry 2 }
+
+   smonVlanIdStatsTotalOverflowPkts OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS "packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of times the associated smonVlanIdStatsTotalPkts
+         counter has overflowed."
+    ::= { smonVlanIdStatsEntry 3 }
+
+   smonVlanIdStatsTotalHCPkts OBJECT-TYPE
+    SYNTAX     Counter64
+    UNITS "packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The total number of packets counted on this VLAN."
+    ::= { smonVlanIdStatsEntry 4 }
+
+   smonVlanIdStatsTotalOctets OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS "octets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The total number of octets counted on this VLAN."
+    ::= { smonVlanIdStatsEntry 5 }
+
+   smonVlanIdStatsTotalOverflowOctets OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS "octets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of times the associated smonVlanIdStatsTotalOctets
+         counter has overflowed."
+    ::= { smonVlanIdStatsEntry 6 }
+
+   smonVlanIdStatsTotalHCOctets OBJECT-TYPE
+    SYNTAX     Counter64
+    UNITS "octets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The total number of octets counted on this VLAN."
+   ::= { smonVlanIdStatsEntry 7 }
+
+   smonVlanIdStatsNUcastPkts OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS "packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The total number of non-unicast packets counted on this
+         VLAN."
+    ::= { smonVlanIdStatsEntry 8 }
+
+   smonVlanIdStatsNUcastOverflowPkts OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS "packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of times the associated smonVlanIdStatsNUcastPkts
+         counter has overflowed."
+    ::= { smonVlanIdStatsEntry 9 }
+
+   smonVlanIdStatsNUcastHCPkts OBJECT-TYPE
+    SYNTAX     Counter64
+    UNITS "packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The total number of non-unicast packets counted on
+         this VLAN."
+    ::= { smonVlanIdStatsEntry 10 }
+
+   smonVlanIdStatsNUcastOctets OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS "octets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The total number of non-unicast octets counted on
+         this VLAN."
+    ::= { smonVlanIdStatsEntry 11 }
+
+   smonVlanIdStatsNUcastOverflowOctets OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS "octets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of times the associated
+         smonVlanIdStatsNUcastOctets counter has overflowed."
+    ::= { smonVlanIdStatsEntry 12 }
+
+   smonVlanIdStatsNUcastHCOctets OBJECT-TYPE
+    SYNTAX     Counter64
+    UNITS "octets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The total number of Non-unicast octets counted on
+         this VLAN."
+    ::= { smonVlanIdStatsEntry 13 }
+
+   smonVlanIdStatsCreateTime OBJECT-TYPE
+    SYNTAX     LastCreateTime
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The value of sysUpTime when this entry was last
+        activated. This object allows to a management station to
+        detect deletion and recreation cycles between polls."
+    ::= { smonVlanIdStatsEntry 14 }
+
+   -- smonPrioStatsControlTable
+
+   smonPrioStatsControlTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF SmonPrioStatsControlEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Controls the setup of priority statistics tables.
+
+         The smonPrioStatsControlTable allows configuration of
+         collections based on the value of the 3-bit user priority
+         field encoded in the Tag Control Information (TCI) field
+         according to [19],[20].
+
+         Note that this table merely reports priority as encoded in
+         the VLAN headers, not the priority (if any) given to the
+         frame for the actual switching purposes."
+
+    ::= { smonStats 3 }
+
+   smonPrioStatsControlEntry OBJECT-TYPE
+    SYNTAX      SmonPrioStatsControlEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A conceptual row in the smonPrioStatsControlTable."
+    INDEX { smonPrioStatsControlIndex }
+    ::= { smonPrioStatsControlTable 1 }
+
+
+   SmonPrioStatsControlEntry ::= SEQUENCE {
+    smonPrioStatsControlIndex                 Integer32,
+    smonPrioStatsControlDataSource           DataSource,
+    smonPrioStatsControlCreateTime       LastCreateTime,
+    smonPrioStatsControlOwner               OwnerString,
+    smonPrioStatsControlStatus                RowStatus
+   }
+
+   smonPrioStatsControlIndex OBJECT-TYPE
+    SYNTAX      Integer32 (1..65535)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A unique arbitrary index for this smonPrioStatsControlEntry."
+    ::= { smonPrioStatsControlEntry 1 }
+
+   smonPrioStatsControlDataSource OBJECT-TYPE
+    SYNTAX      DataSource
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The source of data for this set of VLAN statistics.
+
+        This object MAY NOT be modified if the associated
+        smonPrioStatsControlStatus object is equal to active(1)."
+    ::= { smonPrioStatsControlEntry 2 }
+
+   smonPrioStatsControlCreateTime OBJECT-TYPE
+    SYNTAX     LastCreateTime
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+         "The value of sysUpTime when this entry was created.
+        This object allows to a management station to
+        detect deletion and recreation cycles between polls."
+
+    ::= { smonPrioStatsControlEntry 3 }
+
+   smonPrioStatsControlOwner OBJECT-TYPE
+    SYNTAX      OwnerString
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+         "Administratively assigned named of the owner of this entry.
+        It usually defines the entity that created this entry and is
+        therefore using the resources assigned to it, though there is
+        no enforcement mechanism, nor assurance that rows created are
+        ever used."
+    ::= { smonPrioStatsControlEntry 4 }
+
+   smonPrioStatsControlStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The status of this row.
+        An entry MAY NOT exist in the active state unless all
+        objects in the entry have an appropriate value.
+
+        If this object is not equal to active(1), all associated
+        entries in the smonPrioStatsTable SHALL be deleted."
+    ::= { smonPrioStatsControlEntry 5 }
+
+   -- The Priority Statistics Table
+
+   smonPrioStatsTable  OBJECT-TYPE
+    SYNTAX     SEQUENCE OF SmonPrioStatsEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "Contains the priority statistics. The collections are based
+         on the value of the 3-bit user priority field encoded in the
+         Tag Control Information (TCI) field according to [19], [20].
+         Note that this table merely reports priority as encoded in
+         the VLAN headers, not the priority (if any) given to the
+         frame for the actual switching purposes.
+
+         No garbage collection is designed for this table, as there
+         always are at most eight rows per statistical set, and the
+         low memory requirements do not justify the implementation of
+         such a mechanism."
+    ::= { smonStats 4 }
+
+   smonPrioStatsEntry  OBJECT-TYPE
+    SYNTAX     SmonPrioStatsEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A conceptual row in smonPrioStatsTable."
+    INDEX { smonPrioStatsControlIndex, smonPrioStatsId }
+    ::= { smonPrioStatsTable 1 }
+
+   SmonPrioStatsEntry ::= SEQUENCE {
+    smonPrioStatsId                       Integer32,
+    smonPrioStatsPkts                     Counter32,
+    smonPrioStatsOverflowPkts             Counter32,
+    smonPrioStatsHCPkts                   Counter64,
+    smonPrioStatsOctets                   Counter32,
+    smonPrioStatsOverflowOctets           Counter32,
+    smonPrioStatsHCOctets                 Counter64
+   }
+
+   smonPrioStatsId OBJECT-TYPE
+    SYNTAX     Integer32 (0..7)
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "The unique identifier of the priority level monitored for
+         this specific statistics collection."
+    REFERENCE
+        " Draft Standard for Virtual Bridged Local Area Networks,
+          P802.1Q/D10, chapter 4.3.2.1"
+    ::= { smonPrioStatsEntry 1 }
+
+   smonPrioStatsPkts OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS "packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The total number of packets counted on
+         this priority level."
+    ::= { smonPrioStatsEntry 2 }
+
+   smonPrioStatsOverflowPkts OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS "packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of times the associated smonPrioStatsPkts
+         counter has overflowed."
+    ::= { smonPrioStatsEntry 3 }
+
+   smonPrioStatsHCPkts OBJECT-TYPE
+    SYNTAX     Counter64
+    UNITS "packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The total number of packets counted on
+         this priority level."
+    ::= { smonPrioStatsEntry 4 }
+
+   smonPrioStatsOctets OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS "octets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The total number of octets counted on
+         this priority level."
+    ::= { smonPrioStatsEntry 5 }
+
+   smonPrioStatsOverflowOctets OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS "octets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of times the associated smonPrioStatsOctets
+         counter has overflowed."
+    ::= { smonPrioStatsEntry 6 }
+
+   smonPrioStatsHCOctets OBJECT-TYPE
+    SYNTAX     Counter64
+    UNITS "octets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The total number of octets counted on
+         this priority level."
+    ::= { smonPrioStatsEntry 7 }
+
+
+   portCopyTable  OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PortCopyEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        " Port Copy provides the ability to copy all frames from a
+         specified source to specified destination within a switch.
+         Source and destinations MUST be ifEntries, as defined by [22].
+         One to one, one to many, many to one and many to many source to
+         destination relationships may be configured.
+
+         Applicable counters on the destination will increment for all
+         packets transiting the port, be it by normal bridging/switching
+         or due to packet copy.
+         Note that this table manages no RMON data collection by itself,
+         and an agent may possibly implement no RMON objects except
+         objects related to the port copy operation defined by the
+         portCopyCompliance conformance macro. That allows for a switch
+         with no other embedded RMON capability to perform port copy
+         operations to a destination port at which a different external
+         RMON probe is connected.
+
+         One to one, many to one and one to many source to destination
+         relationships may be configured.
+
+         Each row that exists in this table defines such a
+         relationship. By disabling a row in this table the port copy
+         relationship no longer exists.
+
+         The number of entries and the types of port copies (1-1,
+         many-1, 1-many) are implementation specific and could
+         possibly be dynamic due to changing resource availability.
+
+         In order to configure a source to destination portCopy
+         relationship, both source and destination interfaces MUST be
+         present as an ifEntry in the ifTable and their respective
+         ifAdminStatus and ifOperStatus values MUST be equal to
+         'up(1)'. If the value of any of those two objects changes
+         after the portCopyEntry is activated, portCopyStatus will
+         transition to 'notReady(3)'.
+
+         The capability of an interface to be source or destination of
+         a port copy operation is described by the 'copySourcePort(0)'
+         and 'copyDestPort(1)' bits in dataSourceCopyCaps. Those bits
+         SHOULD be appropriately set by the agent, in order to allow
+         for a portCopyEntry to be created.
+
+         Applicable counters on the destination will increment for all
+         packets transmitted, be it by normal bridging/switching or
+         due to packet copy."
+   ::= { portCopyConfig 1 }
+
+   portCopyEntry  OBJECT-TYPE
+    SYNTAX      PortCopyEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Describes a particular port copy entry."
+   INDEX { portCopySource, portCopyDest }
+   ::= { portCopyTable 1 }
+
+   PortCopyEntry ::= SEQUENCE {
+        portCopySource
+                InterfaceIndex,
+        portCopyDest
+                InterfaceIndex,
+        portCopyDestDropEvents
+                Counter32,
+        portCopyDirection
+                INTEGER,
+        portCopyStatus
+                RowStatus
+        }
+
+
+   portCopySource OBJECT-TYPE
+    SYNTAX       InterfaceIndex
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "The ifIndex of the source which will have all packets
+         redirected to the destination as defined by portCopyDest."
+    ::= { portCopyEntry 1 }
+
+   portCopyDest OBJECT-TYPE
+    SYNTAX       InterfaceIndex
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Defines the ifIndex destination for the copy operation."
+    ::= { portCopyEntry 2 }
+
+   portCopyDestDropEvents OBJECT-TYPE
+    SYNTAX       Counter32
+    UNITS "events"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+         "The total number of events in which port copy packets were
+         dropped by the switch at the destination port due to lack of
+         resources.
+
+         Note that this number is not necessarily the number of
+         packets dropped; it is just the number of times this
+         condition has been detected.
+
+         A single dropped event counter is maintained for each
+         portCopyDest. Thus all instances associated with a given
+         portCopyDest will have the same portCopyDestDropEvents
+         value."
+     ::= { portCopyEntry 3 }
+
+   portCopyDirection OBJECT-TYPE
+    SYNTAX       INTEGER {
+        copyRxOnly(1),
+        copyTxOnly(2),
+        copyBoth(3)
+    }
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "This object affects the way traffic is copied from a switch
+          source port, for the indicated port copy operation.
+
+
+         If this object has the value 'copyRxOnly(1)', then only
+         traffic received on the indicated source port will be copied
+         to the indicated destination port.
+
+         If this object has the value 'copyTxOnly(2)', then only
+         traffic transmitted out the indicated source port will be
+         copied to the indicated destination port.
+
+         If this object has the value 'copyBoth(3)', then all traffic
+         received or transmitted on the indicated source port will be
+         copied to the indicated destination port.
+
+         The creation and deletion of instances of this object is
+         controlled by the portCopyRowStatus object. Note that there
+         is no guarantee that changes in the value of this object
+         performed while the associated portCopyRowStatus object is
+         equal to active will not cause traffic discontinuities in the
+         packet stream."
+   DEFVAL { copyBoth }
+   ::= { portCopyEntry 4 }
+
+   portCopyStatus OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "Defines the status of the port copy entry.
+
+         In order to configure a source to destination portCopy
+         relationship, both source and destination interfaces MUST be
+         present as an ifEntry in the ifTable and their respective
+         ifAdminStatus and ifOperStatus values MUST be equal to
+         'up(1)'. If the value of any of those two objects changes
+         after the portCopyEntry is activated, portCopyStatus will
+         transition to 'notReady(3)'.
+
+         The capability of an interface to be source or destination of
+         a port copy operation is described by the 'copySourcePort(0)'
+         and 'copyDestPort(1)' bits in dataSourceCopyCaps. Those bits
+         SHOULD be appropriately set by the agent, in order to allow
+         for a portCopyEntry to be created."
+    ::= { portCopyEntry 5 }
+
+   -- smonRegistrationPoints
+   -- defines a set of OIDs for registration purposes of entities
+   -- supported by the SMON MIB.
+
+
+   smonVlanDataSource
+         OBJECT IDENTIFIER ::= { smonRegistrationPoints 1}
+
+   -- Defined for use as an SmonDataSource. A single integer parameter
+   -- is appended to the end of this OID when actually encountered in
+   -- the dataSourceCapsTable, which represents a positive, non-zero
+   -- VLAN identifier value.
+
+   -- Conformance Macros
+
+   smonMIBCompliances      OBJECT IDENTIFIER ::= { rmonConformance 3}
+   smonMIBGroups           OBJECT IDENTIFIER ::= { rmonConformance 4}
+
+   smonMIBCompliance       MODULE-COMPLIANCE
+        STATUS      current
+        DESCRIPTION
+        "Describes the requirements for full conformance with the SMON
+        MIB"
+        MODULE -- this module
+        MANDATORY-GROUPS                 {dataSourceCapsGroup,
+                                          smonVlanStatsGroup,
+                                          smonPrioStatsGroup,
+                                          portCopyConfigGroup,
+                                          smonInformationGroup}
+
+        GROUP         smonHcTo100mbGroup
+        DESCRIPTION
+        "This group of VLAN statistics counter are mandatory only for
+         those network interfaces for which the corresponding ifSpeed
+         can be greater than 10MB/sec and less than or equal to
+         100MB/sec."
+
+        GROUP         smonHc100mbPlusGroup
+        DESCRIPTION
+        "This group of VLAN statistics counters are mandatory only for
+         those network interfaces for which the corresponding ifSpeed
+         can be more than 100MB/sec. This group of VLAN statistics is
+         also mandatory for smonDataSources of type VLAN or
+         entPhysicalEntry."
+
+   ::= { smonMIBCompliances 1 }
+
+   smonMIBVlanStatsCompliance        MODULE-COMPLIANCE
+        STATUS      current
+        DESCRIPTION
+        "Describes the requirements for conformance with the SMON MIB
+         with support for VLAN Statistics. Mandatory for a SMON probe
+         in environment where IEEE 802.1Q bridging is implemented."
+
+
+        MODULE -- this module
+        MANDATORY-GROUPS                 {dataSourceCapsGroup,
+                                          smonVlanStatsGroup,
+                                          smonInformationGroup}
+        GROUP         hcVlanTo100mbGroup
+        DESCRIPTION
+        "This group of VLAN statistics counter are mandatory only
+         for those network interfaces for which the corresponding
+         ifSpeed can be up to and including 100MB/sec."
+
+        GROUP         hcVlan100mbPlusGroup
+        DESCRIPTION
+        "This group of VLAN statistics counters are mandatory only for
+         those network interfaces for which the corresponding ifSpeed
+         is greater than 100MB/sec. This group of VLAN statistics is
+         also mandatory for smonDataSources of type VLAN or
+         entPhysicalEntry."
+
+   ::= { smonMIBCompliances 2 }
+
+   smonMIBPrioStatsCompliance         MODULE-COMPLIANCE
+        STATUS      current
+        DESCRIPTION
+        "Describes the requirements for conformance with the SMON MIB
+         with support for priority level Statistics. Mandatory for a
+         SMON probe in a environment where IEEE 802.1p
+         priority-switching is implemented."
+        MODULE -- this module
+        MANDATORY-GROUPS                 {dataSourceCapsGroup,
+                                          smonPrioStatsGroup,
+                                          smonInformationGroup}
+
+        GROUP         hcPrioTo100mbGroup
+        DESCRIPTION
+        "This group of VLAN priority statistics counters are mandatory
+         only for those network interfaces for which the corresponding
+         ifSpeed can be up to and including 100MB/sec."
+
+        GROUP         hcPrio100mbPlusGroup
+        DESCRIPTION
+        "This group is mandatory only for those network
+         interfaces for which the corresponding ifSpeed is greater
+         than 100MB/sec. This group of VLAN priority
+         statistics is also mandatory for smonDataSources of type
+         VLAN or entPhysicalEntry"
+
+   ::= { smonMIBCompliances 3 }
+
+
+   portCopyCompliance                 MODULE-COMPLIANCE
+        STATUS      current
+        DESCRIPTION
+        "Describes the requirements for conformance with the port copy
+         functionality defined by the SMON MIB"
+        MODULE  -- this module
+        MANDATORY-GROUPS                 {dataSourceCapsGroup,
+                                          portCopyConfigGroup,
+                                          smonInformationGroup}
+
+         ::= { smonMIBCompliances 4}
+
+   dataSourceCapsGroup     OBJECT-GROUP
+        OBJECTS          { dataSourceRmonCaps,
+                          dataSourceCopyCaps,
+                          dataSourceCapsIfIndex}
+        STATUS      current
+        DESCRIPTION
+        "Defines the objects that describe the capabilities of RMON
+         data sources."
+   ::= {smonMIBGroups 1 }
+
+   smonVlanStatsGroup      OBJECT-GROUP
+        OBJECTS         { smonVlanStatsControlDataSource,
+                         smonVlanStatsControlCreateTime,
+                         smonVlanStatsControlOwner,
+                         smonVlanStatsControlStatus,
+                         smonVlanIdStatsTotalPkts,
+                         smonVlanIdStatsTotalOctets,
+                         smonVlanIdStatsNUcastPkts,
+                         smonVlanIdStatsCreateTime}
+        STATUS      current
+        DESCRIPTION
+        "Defines the switch monitoring specific statistics - per VLAN
+         Id on interfaces of 10MB or less."
+   ::= { smonMIBGroups 2 }
+
+   smonPrioStatsGroup      OBJECT-GROUP
+        OBJECTS         { smonPrioStatsControlDataSource,
+                         smonPrioStatsControlCreateTime,
+                         smonPrioStatsControlOwner,
+                         smonPrioStatsControlStatus,
+                         smonPrioStatsPkts,
+                         smonPrioStatsOctets}
+        STATUS      current
+        DESCRIPTION
+        "Defines the switch monitoring specific statistics - per VLAN
+         Id on interface."
+
+
+   ::= { smonMIBGroups 3 }
+
+   smonHcTo100mbGroup        OBJECT-GROUP
+        OBJECTS         { smonVlanIdStatsTotalOverflowOctets,
+                         smonVlanIdStatsTotalHCOctets,
+                         smonPrioStatsOverflowOctets,
+                         smonPrioStatsHCOctets}
+        STATUS      current
+        DESCRIPTION
+        "Defines the additional high capacity statistics needed to be
+         kept on interfaces with ifSpeed greater than 10MB/sec and
+         less than or equal to 100MB/sec."
+   ::= { smonMIBGroups 4 }
+
+   smonHc100mbPlusGroup      OBJECT-GROUP
+        OBJECTS         { smonVlanIdStatsTotalOverflowPkts,
+                         smonVlanIdStatsTotalHCPkts,
+                         smonVlanIdStatsTotalOverflowOctets,
+                         smonVlanIdStatsTotalHCOctets,
+                         smonVlanIdStatsNUcastOverflowPkts,
+                         smonVlanIdStatsNUcastHCPkts,
+                         smonPrioStatsOverflowPkts,
+                         smonPrioStatsHCPkts,
+                         smonPrioStatsOverflowOctets,
+                         smonPrioStatsHCOctets}
+        STATUS      current
+        DESCRIPTION
+        "Defines the additional high capacity statistics needed to be
+         kept on interfaces with ifSpeed of more than 100MB/sec. These
+         statistics MUST also be kept on smonDataSources of type VLAN
+         or entPhysicalEntry."
+   ::= { smonMIBGroups 5 }
+
+   hcVlanTo100mbGroup        OBJECT-GROUP
+        OBJECTS         { smonVlanIdStatsTotalOverflowOctets,
+                         smonVlanIdStatsTotalHCOctets}
+        STATUS      current
+        DESCRIPTION
+        "Defines the additional high capacity VLAN statistics
+         needed to be kept on interfaces with ifSpeed greater than
+         10MB/sec and less than or equal to 100MB/sec."
+   ::= { smonMIBGroups 6 }
+
+   hcVlan100mbPlusGroup      OBJECT-GROUP
+        OBJECTS         { smonVlanIdStatsTotalOverflowPkts,
+                         smonVlanIdStatsTotalHCPkts,
+                         smonVlanIdStatsTotalOverflowOctets,
+                         smonVlanIdStatsTotalHCOctets,
+                         smonVlanIdStatsNUcastOverflowPkts,
+                         smonVlanIdStatsNUcastHCPkts}
+        STATUS      current
+        DESCRIPTION
+        "Defines the additional high capacity VLAN statistics
+         needed to be kept on interfaces with ifSpeed of more than
+         100MB/sec.  These statistics MUST also be kept on
+         smonDataSources of type VLAN or entPhysicalEntry."
+   ::= { smonMIBGroups 7 }
+
+   hcPrioTo100mbGroup        OBJECT-GROUP
+        OBJECTS         { smonPrioStatsOverflowOctets,
+                         smonPrioStatsHCOctets }
+        STATUS      current
+        DESCRIPTION
+        "Defines the additional high capacity VLAN priority
+         statistics needed to be kept on interfaces with
+         ifSpeed of greater than 10MB/sec and less than or equal
+         to 100MB/sec."
+   ::= { smonMIBGroups 8 }
+
+   hcPrio100mbPlusGroup      OBJECT-GROUP
+        OBJECTS         { smonPrioStatsOverflowPkts,
+                         smonPrioStatsHCPkts,
+                         smonPrioStatsOverflowOctets,
+                         smonPrioStatsHCOctets}
+        STATUS      current
+        DESCRIPTION
+        "Defines the additional high capacity VLAN priority
+         statistics needed to be kept on interfaces with
+         ifSpeed of greater than 100MB/sec. These statistics MUST
+         also be kept on smonDataSources of type VLAN or
+         entPhysicalEntry."
+   ::= { smonMIBGroups 9 }
+
+   smonVlanStatsExtGroup   OBJECT-GROUP
+        OBJECTS         {smonVlanIdStatsNUcastOctets,
+                         smonVlanIdStatsNUcastOverflowOctets,
+                         smonVlanIdStatsNUcastHCOctets}
+        STATUS      current
+        DESCRIPTION
+        "Defines the switch monitoring specific statistics for systems
+         capable of counting non-unicast octets for a given dataSource
+         (as described in the dataSourceRmonCaps object)."
+   ::= { smonMIBGroups 10 }
+
+   smonInformationGroup    OBJECT-GROUP
+        OBJECTS         { smonCapabilities }
+        STATUS      current
+        DESCRIPTION
+        "An indication of the SMON capabilities supported by this
+        agent."
+   ::= { smonMIBGroups 11 }
+
+   portCopyConfigGroup     OBJECT-GROUP
+        OBJECTS         { portCopyDestDropEvents,
+                          portCopyDirection,
+                          portCopyStatus
+                        }
+        STATUS      current
+        DESCRIPTION
+        "Defines the control objects for copy port operations."
+   ::= { smonMIBGroups 12 }
+
+   END