Initial commitHEADmain

1 files changed, 857 insertions, 0 deletions

diff --git a/MIBS/LLDP-EXT-DOT3-MIB b/MIBS/LLDP-EXT-DOT3-MIB
new file mode 100644
index 0000000..937f5e4
--- /dev/null
+++ b/MIBS/LLDP-EXT-DOT3-MIB
@@ -0,0 +1,857 @@
+LLDP-EXT-DOT3-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, Integer32
+        FROM SNMPv2-SMI
+    TEXTUAL-CONVENTION, TruthValue
+        FROM SNMPv2-TC
+    MODULE-COMPLIANCE, OBJECT-GROUP
+        FROM SNMPv2-CONF
+    lldpExtensions, lldpLocPortNum, 
+    lldpRemTimeMark, lldpRemLocalPortNum, lldpRemIndex,
+    lldpPortConfigEntry
+        FROM LLDP-MIB;
+
+lldpXdot3MIB MODULE-IDENTITY
+    LAST-UPDATED "200505060000Z" -- May 06, 2005
+    ORGANIZATION "IEEE 802.1 Working Group"
+    CONTACT-INFO 
+            "  WG-URL: http://grouper.ieee.org/groups/802/1/index.html
+             WG-EMail: stds-802-1@ieee.org
+
+              Contact: Paul Congdon
+               Postal: Hewlett-Packard Company
+                       8000 Foothills Blvd. 
+                       Roseville, CA 95747
+                       USA
+                  Tel: +1-916-785-5753
+               E-mail: paul_congdon@hp.com"
+    DESCRIPTION
+            "The LLDP Management Information Base extension module for
+            IEEE 802.3 organizationally defined discovery information.
+
+            In order to assure the uniqueness of the LLDP-MIB,
+            lldpXdot3MIB is branched from lldpExtensions using OUI value
+            as the node.  An OUI/'company_id' is a 24 bit globally unique
+            assigned number referenced by various standards.
+
+            Copyright (C) IEEE (2005).  This version of this MIB module
+            is published as Annex G.6.1 of IEEE Std 802.1AB-2005;
+            see the standard itself for full legal notices."
+    REVISION        "200505060000Z" -- May 06, 2005
+    DESCRIPTION
+            "Published as part of IEEE Std 802.1AB-2005 initial version."
+-- OUI for IEEE 802.3 is 4623 (00-12-0F)
+   ::= { lldpExtensions 4623 } 
+--UnComment For MIBCOMPLIER TOOL
+--   ::= { iso std(0) iso8802(8802) ieee802dot1(1) ieee802dot1mibs(1) lldPMIB(2)  lldpObjects(1)                lldpExtensions(5) 4623}
+
+------------------------------------------------------------------------------
+------------------------------------------------------------------------------
+--
+-- Organizationally Defined Information Extension - IEEE 802.3
+--
+------------------------------------------------------------------------------
+------------------------------------------------------------------------------
+
+lldpXdot3Objects    OBJECT IDENTIFIER ::= { lldpXdot3MIB 1 }
+
+-- LLDP IEEE 802.3 extension MIB groups
+lldpXdot3Config     OBJECT IDENTIFIER ::= { lldpXdot3Objects 1 }
+lldpXdot3LocalData  OBJECT IDENTIFIER ::= { lldpXdot3Objects 2 }
+lldpXdot3RemoteData OBJECT IDENTIFIER ::= { lldpXdot3Objects 3 }
+
+-- textual conventions
+
+LldpPowerPortClass ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+            "This TC describes the Power over Ethernet (PoE) port class."
+    SYNTAX  INTEGER {
+            pClassPSE(1),
+            pClassPD(2)
+    }
+
+LldpLinkAggStatusMap ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+            "This TC describes the link aggregation status.
+
+            The bit 'aggCapable(0)' indicates the link is capable of being
+            aggregated. 
+
+            The bit 'aggEnabled(1)' indicates the link is currently in
+            aggregation."
+    SYNTAX  BITS {
+            aggCapable(0),
+            aggEnabled(1)
+    }
+
+------------------------------------------------------------------------------
+-- IEEE 802.3 - Configuration
+------------------------------------------------------------------------------
+
+lldpXdot3PortConfigTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF LldpXdot3PortConfigEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "A table that controls selection of LLDP TLVs to be transmitted 
+            on individual ports."
+    ::= { lldpXdot3Config 1 }
+
+lldpXdot3PortConfigEntry  OBJECT-TYPE
+    SYNTAX      LldpXdot3PortConfigEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "LLDP configuration information that controls the
+            transmission of IEEE 802.3 organizationally defined TLVs on
+            LLDP transmission capable ports.
+
+            This configuration object augments the lldpPortConfigEntry of
+            the LLDP-MIB, therefore it is only present along with the port
+            configuration defined by the associated lldpPortConfigEntry
+            entry.
+
+            Each active lldpXdot3PortConfigEntry must be from non-volatile
+            storage (along with the corresponding lldpPortConfigEntry)
+            after a re-initialization of the management system."
+    AUGMENTS { lldpPortConfigEntry }
+    ::= { lldpXdot3PortConfigTable 1 }
+
+LldpXdot3PortConfigEntry ::= SEQUENCE {
+      lldpXdot3PortConfigTLVsTxEnable  BITS
+}
+
+lldpXdot3PortConfigTLVsTxEnable  OBJECT-TYPE
+    SYNTAX      BITS {
+            macPhyConfigStatus(0),
+            powerViaMDI(1),
+            linkAggregation(2),
+            maxFrameSize(3)
+    }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "The lldpXdot3PortConfigTLVsTxEnable, defined as a bitmap,
+            includes the IEEE 802.3 organizationally defined set of LLDP
+            TLVs whose transmission is allowed on the local LLDP agent by
+            the network management.  Each bit in the bitmap corresponds
+            to an IEEE 802.3 subtype associated with a specific IEEE
+            802.3 optional TLV.  The bit 0 is not used since there is
+            no corresponding subtype.
+
+            The bit 'macPhyConfigStatus(0)' indicates that LLDP agent
+            should transmit 'MAC/PHY configuration/status TLV'.
+
+            The bit 'powerViaMDI(1)' indicates that LLDP agent should
+            transmit 'Power via MDI TLV'.
+
+            The bit 'linkAggregation(2)' indicates that LLDP agent should
+            transmit 'Link Aggregation TLV'.
+
+            The bit 'maxFrameSize(3)' indicates that LLDP agent should
+            transmit 'Maximum-frame-size TLV'.
+
+            The default value for lldpXdot3PortConfigTLVsTxEnable object
+            is an empty set, which means no enumerated values are set.
+
+            The value of this object must be restored from non-volatile
+            storage after a re-initialization of the management system."
+    REFERENCE 
+            "IEEE 802.1AB-2005 10.2.1.1"
+--    DEFVAL  { { } }
+    ::= { lldpXdot3PortConfigEntry  1 }
+
+
+------------------------------------------------------------------------------
+-- IEEE 802.3 - Local Device Information 
+------------------------------------------------------------------------------
+---
+--- lldpXdot3LocPortTable: Ethernet Port AutoNeg/Speed/Duplex
+---                        Information Table
+---
+---
+lldpXdot3LocPortTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF LldpXdot3LocPortEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "This table contains one row per port of Ethernet port
+            information (as a part of the LLDP 802.3 organizational
+            extension) on the local system known to this agent."
+    ::= { lldpXdot3LocalData 1 }
+
+lldpXdot3LocPortEntry OBJECT-TYPE
+    SYNTAX      LldpXdot3LocPortEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "Information about a particular port component."
+    INDEX   { lldpLocPortNum }
+    ::= { lldpXdot3LocPortTable 1 }
+
+LldpXdot3LocPortEntry ::= SEQUENCE {
+              lldpXdot3LocPortAutoNegSupported     TruthValue,
+              lldpXdot3LocPortAutoNegEnabled       TruthValue,
+              lldpXdot3LocPortAutoNegAdvertisedCap OCTET STRING,
+              lldpXdot3LocPortOperMauType          Integer32
+} 
+
+lldpXdot3LocPortAutoNegSupported OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The truth value used to indicate whether the given port
+            (associated with the local system) supports Auto-negotiation."
+    REFERENCE 
+            "IEEE 802.1AB-2005 G.2.1"
+    ::= { lldpXdot3LocPortEntry 1 }
+
+lldpXdot3LocPortAutoNegEnabled  OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The truth value used to indicate whether port
+            Auto-negotiation is enabled on the given port associated
+            with the local system."
+    REFERENCE 
+            "IEEE 802.1AB-2005 G.2.1"
+    ::= { lldpXdot3LocPortEntry 2 }
+
+lldpXdot3LocPortAutoNegAdvertisedCap OBJECT-TYPE
+    SYNTAX      OCTET STRING(SIZE(2))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This object contains the value (bitmap) of the
+            ifMauAutoNegCapAdvertisedBits object (defined in IETF RFC
+            3636) which is associated with the given port on the
+            local system."
+    REFERENCE 
+            "IEEE 802.1AB-2005 G.2.2"
+    ::= { lldpXdot3LocPortEntry 3 }
+
+lldpXdot3LocPortOperMauType  OBJECT-TYPE
+    SYNTAX 	    Integer32(0..2147483647)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "An integer value that indicates the operational MAU type
+            of the given port on the local system.
+
+            This object contains the integer value derived from the
+            list position of the corresponding dot3MauType as listed 
+            in IETF RFC 3636 (or subsequent revisions) and is equal
+            to the last number in the respective dot3MauType OID.
+           
+            For example, if the ifMauType object is dot3MauType1000BaseTHD
+            which corresponds to {dot3MauType 29}, the numerical value of
+            this field will be 29. For MAU types not listed in RFC 3636
+            (or subsequent revisions), the value of this field shall be
+            set to zero."
+    REFERENCE 
+            "IEEE 802.1AB-2005 G.2.3"
+    ::= { lldpXdot3LocPortEntry 4 }
+
+---
+---
+--- lldpXdot3LocPowerTable: Power Ethernet Information Table
+---
+---
+lldpXdot3LocPowerTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF LldpXdot3LocPowerEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "This table contains one row per port of power ethernet 
+            information (as a part of the LLDP 802.3 organizational
+            extension) on the local system known to this agent."
+    ::= { lldpXdot3LocalData 2 }
+
+lldpXdot3LocPowerEntry OBJECT-TYPE
+    SYNTAX      LldpXdot3LocPowerEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "Information about a particular port component."
+    INDEX   { lldpLocPortNum }
+    ::= { lldpXdot3LocPowerTable 1 }
+
+LldpXdot3LocPowerEntry ::= SEQUENCE {
+              lldpXdot3LocPowerPortClass           LldpPowerPortClass,
+              lldpXdot3LocPowerMDISupported        TruthValue,
+              lldpXdot3LocPowerMDIEnabled          TruthValue,
+              lldpXdot3LocPowerPairControlable     TruthValue,
+              lldpXdot3LocPowerPairs               Integer32,
+              lldpXdot3LocPowerClass               Integer32
+} 
+
+lldpXdot3LocPowerPortClass  OBJECT-TYPE
+    SYNTAX      LldpPowerPortClass
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The value that identifies the port Class of the given port
+            associated with the local system."
+    REFERENCE 
+            "IEEE 802.1AB-2005 G.3.1"
+    ::= { lldpXdot3LocPowerEntry 1 }
+
+lldpXdot3LocPowerMDISupported  OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The truth value used to indicate whether the MDI power is
+            supported on the given port associated with the local system."
+    REFERENCE 
+            "IEEE 802.1AB-2005 G.3.1"
+    ::= { lldpXdot3LocPowerEntry 2 }
+
+lldpXdot3LocPowerMDIEnabled  OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The truth value used to identify whether MDI power is
+            enabled on the given port associated with the local system."
+    REFERENCE 
+            "IEEE 802.1AB-2005 G.3.1"
+    ::= { lldpXdot3LocPowerEntry 3 }
+
+lldpXdot3LocPowerPairControlable  OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The truth value is derived from the value of
+            pethPsePortPowerPairsControlAbility object (defined in IETF
+            RFC 3621) and is used to indicate whether the pair selection
+            can be controlled on the given port associated with the
+            local system."
+    REFERENCE 
+            "IEEE 802.1AB-2005 G.3.1"
+    ::= { lldpXdot3LocPowerEntry 4 }
+
+lldpXdot3LocPowerPairs  OBJECT-TYPE
+    SYNTAX      Integer32(1|2)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This object contains the value of the pethPsePortPowerPairs
+            object (defined in IETF RFC 3621) which is associated with
+            the given port on the local system."
+    REFERENCE 
+            "IEEE 802.1AB-2005 G.3.2"
+    ::= { lldpXdot3LocPowerEntry 5 }
+
+lldpXdot3LocPowerClass  OBJECT-TYPE
+    SYNTAX      Integer32(1|2|3|4|5)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This object contains the value of the
+            pethPsePortPowerClassifications object (defined in IETF
+            RFC 3621) which is associated with the given port on the
+            local system."
+    REFERENCE 
+            "IEEE 802.1AB-2005 G.3.3"
+    ::= { lldpXdot3LocPowerEntry 6 }
+
+---
+---
+--- lldpXdot3LocLinkAggTable: Link Aggregation Information Table
+---
+---
+lldpXdot3LocLinkAggTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF LldpXdot3LocLinkAggEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "This table contains one row per port of link aggregation 
+            information (as a part of the LLDP 802.3 organizational
+            extension) on the local system known to this agent."
+    ::= { lldpXdot3LocalData 3 }
+
+lldpXdot3LocLinkAggEntry OBJECT-TYPE
+    SYNTAX      LldpXdot3LocLinkAggEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "Link Aggregation information about a particular port
+            component."
+    INDEX   { lldpLocPortNum }
+    ::= { lldpXdot3LocLinkAggTable 1 }
+
+LldpXdot3LocLinkAggEntry ::= SEQUENCE {
+              lldpXdot3LocLinkAggStatus       LldpLinkAggStatusMap,
+              lldpXdot3LocLinkAggPortId       Integer32
+} 
+
+lldpXdot3LocLinkAggStatus OBJECT-TYPE
+    SYNTAX      LldpLinkAggStatusMap
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The bitmap value contains the link aggregation capabilities
+            and the current aggregation status of the link."
+    REFERENCE 
+            "IEEE 802.1AB-2005 G.4.1"
+    ::= { lldpXdot3LocLinkAggEntry 1 }
+
+lldpXdot3LocLinkAggPortId OBJECT-TYPE
+    SYNTAX 	    Integer32(0|1..2147483647)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This object contains the IEEE 802.3 aggregated port
+            identifier, aAggPortID (IEEE 802.3-2002, 30.7.2.1.1),
+            derived from the ifNumber of the ifIndex for the port
+            component in link aggregation.
+
+            If the port is not in link aggregation state and/or it
+            does not support link aggregation, this value should be set
+            to zero."
+    REFERENCE 
+            "IEEE 802.1AB-2005 G.4.2"
+    ::= { lldpXdot3LocLinkAggEntry 2 }
+
+---
+---
+--- lldpXdot3LocMaxFrameSizeTable: Maximum Frame Size information 
+---
+---
+lldpXdot3LocMaxFrameSizeTable  OBJECT-TYPE
+    SYNTAX      SEQUENCE OF LldpXdot3LocMaxFrameSizeEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "This table contains one row per port of maximum frame 
+            size information (as a part of the LLDP 802.3 organizational
+            extension) on the local system known to this agent."
+    ::= { lldpXdot3LocalData 4 }
+
+lldpXdot3LocMaxFrameSizeEntry OBJECT-TYPE
+    SYNTAX      LldpXdot3LocMaxFrameSizeEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "Maximum Frame Size information about a particular port
+            component."
+    INDEX   { lldpLocPortNum }
+    ::= { lldpXdot3LocMaxFrameSizeTable 1 }
+
+LldpXdot3LocMaxFrameSizeEntry ::= SEQUENCE {
+              lldpXdot3LocMaxFrameSize   Integer32
+} 
+
+lldpXdot3LocMaxFrameSize OBJECT-TYPE
+    SYNTAX      Integer32(0..65535)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "An integer value indicating the maximum supported frame 
+             size in octets on the given port of the local system."
+    REFERENCE 
+            "IEEE 802.1AB-2005 G.5.1"
+    ::= { lldpXdot3LocMaxFrameSizeEntry 1 }
+
+
+------------------------------------------------------------------------------
+-- IEEE 802.3 - Remote Devices Information
+------------------------------------------------------------------------------
+---
+---
+--- lldpXdot3RemPortTable: Ethernet Information Table
+---
+---
+lldpXdot3RemPortTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF LldpXdot3RemPortEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "This table contains Ethernet port information (as a part
+            of the LLDP 802.3 organizational extension) of the remote
+            system."
+    ::= { lldpXdot3RemoteData 1 }
+
+lldpXdot3RemPortEntry OBJECT-TYPE
+    SYNTAX      LldpXdot3RemPortEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "Information about a particular physical network connection."
+    INDEX   { lldpRemTimeMark,
+              lldpRemLocalPortNum,
+              lldpRemIndex }
+    ::= { lldpXdot3RemPortTable 1 }
+
+LldpXdot3RemPortEntry ::= SEQUENCE {
+              lldpXdot3RemPortAutoNegSupported     TruthValue,
+              lldpXdot3RemPortAutoNegEnabled       TruthValue,
+              lldpXdot3RemPortAutoNegAdvertisedCap OCTET STRING,
+              lldpXdot3RemPortOperMauType          Integer32
+} 
+
+lldpXdot3RemPortAutoNegSupported OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The truth value used to indicate whether the given port
+            (associated with remote system) supports Auto-negotiation."
+    REFERENCE 
+            "IEEE 802.1AB-2005 G.2.1"
+    ::= { lldpXdot3RemPortEntry 1 }
+
+lldpXdot3RemPortAutoNegEnabled  OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The truth value used to indicate whether port
+            Auto-negotiation is enabled on the given port associated
+            with the remote system."
+    REFERENCE 
+            "IEEE 802.1AB-2005 G.2.1"
+    ::= { lldpXdot3RemPortEntry 2 }
+
+lldpXdot3RemPortAutoNegAdvertisedCap  OBJECT-TYPE
+    SYNTAX      OCTET STRING(SIZE(2))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This object contains the value (bitmap) of the
+            ifMauAutoNegCapAdvertisedBits object (defined in IETF RFC
+            3636) which is associated with the given port on the
+            remote system."
+    REFERENCE 
+            "IEEE 802.1AB-2005 G.2.2"
+    ::= { lldpXdot3RemPortEntry 3 }
+
+lldpXdot3RemPortOperMauType OBJECT-TYPE
+    SYNTAX 	    Integer32(0..2147483647)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "An integer value that indicates the operational MAU type
+            of the sending device.
+
+            This object contains the integer value derived from the
+            list position of the corresponding dot3MauType as listed in
+            in IETF RFC 3636 (or subsequent revisions) and is equal
+            to the last number in the respective dot3MauType OID.
+           
+            For example, if the ifMauType object is dot3MauType1000BaseTHD
+            which corresponds to {dot3MauType 29}, the numerical value of
+            this field will be 29. For MAU types not listed in RFC 3636
+            (or subsequent revisions), the value of this field shall be
+            set to zero."
+    REFERENCE 
+            "IEEE 802.1AB-2005 G.2.3"
+    ::= { lldpXdot3RemPortEntry 4 }
+
+---
+---
+--- lldpXdot3RemPowerTable: Power Ethernet Information Table
+---
+---
+lldpXdot3RemPowerTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF LldpXdot3RemPowerEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "This table contains Ethernet power information (as a part
+            of the LLDP 802.3 organizational extension) of the remote
+            system."
+    ::= { lldpXdot3RemoteData 2 }
+
+lldpXdot3RemPowerEntry OBJECT-TYPE
+    SYNTAX      LldpXdot3RemPowerEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "Information about a particular physical network connection."
+    INDEX   { lldpRemTimeMark,
+              lldpRemLocalPortNum,
+              lldpRemIndex }
+    ::= { lldpXdot3RemPowerTable 1 }
+
+LldpXdot3RemPowerEntry ::= SEQUENCE {
+              lldpXdot3RemPowerPortClass           LldpPowerPortClass,
+              lldpXdot3RemPowerMDISupported        TruthValue,
+              lldpXdot3RemPowerMDIEnabled          TruthValue,
+              lldpXdot3RemPowerPairControlable     TruthValue,
+              lldpXdot3RemPowerPairs               Integer32,
+              lldpXdot3RemPowerClass               Integer32
+} 
+
+lldpXdot3RemPowerPortClass  OBJECT-TYPE
+    SYNTAX      LldpPowerPortClass
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The value that identifies the port Class of the given port
+            associated with the remote system."
+    REFERENCE 
+            "IEEE 802.1AB-2005 G.3.1"
+    ::= { lldpXdot3RemPowerEntry 1 }
+
+lldpXdot3RemPowerMDISupported  OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The truth value used to indicate whether the MDI power
+            is supported on the given port associated with the remote
+            system."
+    REFERENCE 
+            "IEEE 802.1AB-2005 G.3.1"
+    ::= { lldpXdot3RemPowerEntry 2 }
+
+lldpXdot3RemPowerMDIEnabled  OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The truth value used to identify whether MDI power is
+            enabled on the given port associated with the remote system."
+    REFERENCE 
+            "IEEE 802.1AB-2005 G.3.1"
+    ::= { lldpXdot3RemPowerEntry 3 }
+
+lldpXdot3RemPowerPairControlable  OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The truth value is derived from the value of
+            pethPsePortPowerPairsControlAbility object (defined in IETF
+            RFC 3621) and is used to indicate whether the pair selection
+            can be controlled on the given port associated with the
+            remote system."
+    REFERENCE 
+            "IEEE 802.1AB-2005 G.3.1"
+    ::= { lldpXdot3RemPowerEntry 4 }
+
+lldpXdot3RemPowerPairs  OBJECT-TYPE
+    SYNTAX      Integer32(1|2)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This object contains the value of the pethPsePortPowerPairs
+            object (defined in IETF RFC 3621) which is associated with
+            the given port on the remote system."
+    REFERENCE 
+            "IEEE 802.1AB-2005 G.3.2"
+    ::= { lldpXdot3RemPowerEntry 5 }
+
+lldpXdot3RemPowerClass  OBJECT-TYPE
+    SYNTAX      Integer32(1|2|3|4|5)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This object contains the value of the
+            pethPsePortPowerClassifications object (defined in IETF
+            RFC 3621) which is associated with the given port on the
+            remote system."
+    REFERENCE 
+            "IEEE 802.1AB-2005 G.3.3"
+    ::= { lldpXdot3RemPowerEntry 6 }
+
+---
+---
+--- lldpXdot3RemLinkAggTable: Link Aggregation Information Table
+---
+---
+lldpXdot3RemLinkAggTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF LldpXdot3RemLinkAggEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "This table contains port link aggregation information
+            (as a part of the LLDP 802.3 organizational extension)
+            of the remote system."
+    ::= { lldpXdot3RemoteData 3 }
+
+lldpXdot3RemLinkAggEntry OBJECT-TYPE
+    SYNTAX      LldpXdot3RemLinkAggEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "Link Aggregation information about remote system's port
+            component."
+    INDEX   { lldpRemTimeMark,
+              lldpRemLocalPortNum,
+              lldpRemIndex }
+    ::= { lldpXdot3RemLinkAggTable 1 }
+
+LldpXdot3RemLinkAggEntry ::= SEQUENCE {
+              lldpXdot3RemLinkAggStatus       LldpLinkAggStatusMap,
+              lldpXdot3RemLinkAggPortId       Integer32
+} 
+
+lldpXdot3RemLinkAggStatus OBJECT-TYPE
+    SYNTAX      LldpLinkAggStatusMap
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The bitmap value contains the link aggregation capabilities
+            and the current aggregation status of the link."
+    REFERENCE 
+            "IEEE 802.1AB-2005 G.4.1"
+    ::= { lldpXdot3RemLinkAggEntry 1 }
+
+lldpXdot3RemLinkAggPortId OBJECT-TYPE
+    SYNTAX 	    Integer32(0|1..2147483647)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This object contains the IEEE 802.3 aggregated port
+            identifier, aAggPortID (IEEE 802.3-2002, 30.7.2.1.1),
+            derived from the ifNumber of the ifIndex for the port
+            component associated with the remote system.
+
+            If the remote port is not in link aggregation state and/or
+            it does not support link aggregation, this value should be
+            zero."
+    REFERENCE 
+            "IEEE 802.1AB-2005 G.4.2"
+    ::= { lldpXdot3RemLinkAggEntry 2 }
+
+
+---
+---
+--- lldpXdot3RemMaxFrameSizeTable: Maximum Frame Size information 
+---
+---
+lldpXdot3RemMaxFrameSizeTable  OBJECT-TYPE
+    SYNTAX      SEQUENCE OF LldpXdot3RemMaxFrameSizeEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "This table contains one row per port of maximum frame 
+            size information (as a part of the LLDP 802.3 organizational
+            extension) of the remote system."
+    ::= { lldpXdot3RemoteData 4 }
+
+lldpXdot3RemMaxFrameSizeEntry OBJECT-TYPE
+    SYNTAX      LldpXdot3RemMaxFrameSizeEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "Maximum Frame Size information about a particular port
+            component."
+    INDEX   { lldpRemTimeMark,
+              lldpRemLocalPortNum,
+              lldpRemIndex }
+    ::= { lldpXdot3RemMaxFrameSizeTable 1 }
+
+LldpXdot3RemMaxFrameSizeEntry ::= SEQUENCE {
+              lldpXdot3RemMaxFrameSize   Integer32
+} 
+
+lldpXdot3RemMaxFrameSize OBJECT-TYPE
+    SYNTAX      Integer32(0..65535)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "An integer value indicating the maximum supported frame 
+             size in octets on the port component associated with the 
+             remote system."
+    REFERENCE 
+            "IEEE 802.1AB-2005 G.5.1"
+    ::= { lldpXdot3RemMaxFrameSizeEntry 1 }
+
+
+------------------------------------------------------------------------------
+-- Conformance Information
+------------------------------------------------------------------------------
+lldpXdot3Conformance OBJECT IDENTIFIER ::= { lldpXdot3MIB 2 }
+lldpXdot3Compliances OBJECT IDENTIFIER ::= { lldpXdot3Conformance 1 }
+lldpXdot3Groups      OBJECT IDENTIFIER ::= { lldpXdot3Conformance 2 }
+
+-- compliance statements
+
+lldpXdot3Compliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "The compliance statement for SNMP entities which implement
+            the LLDP 802.3 organizational extension MIB."
+    MODULE  -- this module
+        MANDATORY-GROUPS { lldpXdot3ConfigGroup, 
+                           lldpXdot3LocSysGroup,
+                           lldpXdot3RemSysGroup
+        }
+    ::= { lldpXdot3Compliances 1 }
+
+-- MIB groupings
+
+lldpXdot3ConfigGroup    OBJECT-GROUP
+    OBJECTS {
+        lldpXdot3PortConfigTLVsTxEnable
+    }
+    STATUS  current
+    DESCRIPTION
+            "The collection of objects which are used to configure the
+            LLDP 802.3 organizational extension implementation behavior.
+
+            This group is mandatory for agents which implement the 
+            LLDP 802.3 organizational extension."
+    ::= { lldpXdot3Groups 1 }
+
+lldpXdot3LocSysGroup  OBJECT-GROUP
+    OBJECTS {
+        lldpXdot3LocPortAutoNegSupported,
+        lldpXdot3LocPortAutoNegEnabled,
+        lldpXdot3LocPortAutoNegAdvertisedCap,
+        lldpXdot3LocPortOperMauType,
+        lldpXdot3LocPowerPortClass,
+        lldpXdot3LocPowerMDISupported,
+        lldpXdot3LocPowerMDIEnabled,
+        lldpXdot3LocPowerPairControlable,
+        lldpXdot3LocPowerPairs,
+        lldpXdot3LocPowerClass,
+        lldpXdot3LocLinkAggStatus,
+        lldpXdot3LocLinkAggPortId,
+        lldpXdot3LocMaxFrameSize
+    }
+    STATUS  current
+    DESCRIPTION
+            "The collection of objects which are used to represent LLDP
+            802.3 organizational extension Local Device Information.
+            
+            This group is mandatory for agents which implement the 
+            LLDP 802.3 organizational extension in the TX mode."
+    ::= { lldpXdot3Groups 2 }
+
+lldpXdot3RemSysGroup  OBJECT-GROUP
+    OBJECTS {
+        lldpXdot3RemPortAutoNegSupported,
+        lldpXdot3RemPortAutoNegEnabled,
+        lldpXdot3RemPortAutoNegAdvertisedCap,
+        lldpXdot3RemPortOperMauType,
+        lldpXdot3RemPowerPortClass,
+        lldpXdot3RemPowerMDISupported,
+        lldpXdot3RemPowerMDIEnabled,
+        lldpXdot3RemPowerPairControlable,
+        lldpXdot3RemPowerPairs,
+        lldpXdot3RemPowerClass,
+        lldpXdot3RemLinkAggStatus,
+        lldpXdot3RemLinkAggPortId,
+        lldpXdot3RemMaxFrameSize
+    }
+    STATUS  current
+    DESCRIPTION
+            "The collection of objects which are used to represent LLDP
+            802.3 organizational extension Local Device Information.
+            
+            This group is mandatory for agents which implement the 
+            LLDP 802.3 organizational extension in the RX mode."
+    ::= { lldpXdot3Groups 3 }
+
+END