Initial commitHEADmain

1 files changed, 951 insertions, 0 deletions

diff --git a/MIBS/IPMROUTE-MIB b/MIBS/IPMROUTE-MIB
new file mode 100644
index 0000000..4ba6230
--- /dev/null
+++ b/MIBS/IPMROUTE-MIB
@@ -0,0 +1,951 @@
+--
+-- This MIB document has been modified to avoid a name conflict
+-- with the standard version (RFC 2932) of this MIB. All occurances
+-- of ipMRoute have been changed to ipMRoute1. This will not have
+-- any impact on users. M. Davison, July, 2001.
+--
+IPMROUTE-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    -- NOTE TO RFC EDITOR: When this document is published as
+    -- an RFC, change 'experimental' to 'mib-2' in the
+    -- following import, and delete this comment
+    MODULE-IDENTITY, OBJECT-TYPE, experimental,
+    Integer32, Counter32, Counter64, Gauge32,
+    IpAddress, TimeTicks             FROM SNMPv2-SMI
+    RowStatus, TEXTUAL-CONVENTION,
+    TruthValue, DisplayString        FROM SNMPv2-TC
+    MODULE-COMPLIANCE, OBJECT-GROUP  FROM SNMPv2-CONF
+    SnmpAdminString                  FROM SNMP-FRAMEWORK-MIB
+    InterfaceIndexOrZero,
+    InterfaceIndex                   FROM IF-MIB;
+
+ipMRoute1MIB MODULE-IDENTITY
+    LAST-UPDATED "9907221200Z" -- July 22, 1999
+    ORGANIZATION "IETF IDMR Working Group"
+    CONTACT-INFO
+            " Dave Thaler
+              Microsoft Corporation
+              One Microsoft Way
+              Redmond, WA  98052-6399
+              US
+
+              Phone: +1 425 703 8835
+              EMail: dthaler@dthaler.microsoft.com"
+    DESCRIPTION
+            "The MIB module for management of IP Multicast routing, but
+            independent of the specific multicast routing protocol in
+            use."
+    REVISION     "9907221200Z" -- July 22, 1999
+    DESCRIPTION
+            "Initial version, published as RFC xxxx (to be filled in by
+            RFC-Editor)."
+    ::= { experimental 60 }
+    -- NOTE TO RFC EDITOR: When this document is published as
+    -- an RFC, change '{ experimental 60 }' to '{ mib-2 XX }'
+    -- where XX is assigned by IANA, and delete this comment.
+
+-- Textual Conventions
+
+
+IpMRoute1Protocol ::= TEXTUAL-CONVENTION
+   STATUS      current
+   DESCRIPTION
+            "The multicast routing protocol.  Inclusion of values for
+            multicast routing protocols is not intended to imply that
+            those protocols need be supported."
+   SYNTAX      INTEGER {
+                   other(1),          -- none of the following
+                   local(2),          -- e.g., manually configured
+                   netmgmt(3),        -- set via net.mgmt protocol
+                   dvmrp(4),
+                   mospf(5),
+                   pimSparseDense(6), -- PIMv1, both DM and SM
+                   cbt(7),
+                   pimSparseMode(8),  -- PIM-SM
+                   pimDenseMode(9),   -- PIM-DM
+                   igmpOnly(10),
+                   bgmp(11),
+                   msdp(12)
+               }
+
+-- Top-level structure of the MIB
+
+ipMRoute1MIBObjects OBJECT IDENTIFIER ::= { ipMRoute1MIB 1 }
+
+ipMRoute1      OBJECT IDENTIFIER ::= { ipMRoute1MIBObjects 1 }
+
+
+-- the IP Multicast Routing MIB-Group
+--
+-- a collection of objects providing information about
+-- IP Multicast Groups
+
+ipMRoute1Enable OBJECT-TYPE
+    SYNTAX     INTEGER { enabled(1), disabled(2) }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The enabled status of IP Multicast routing on this router."
+    ::= { ipMRoute1 1 }
+
+ipMRoute1EntryCount OBJECT-TYPE
+    SYNTAX     Gauge32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of rows in the ipMRoute1Table.  This can be used
+            to monitor the multicast routing table size."
+    ::= { ipMRoute1 7 }
+
+ipMRoute1Table OBJECT-TYPE
+    SYNTAX     SEQUENCE OF IpMRoute1Entry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The (conceptual) table containing multicast routing
+            information for IP datagrams sent by particular sources to
+            the IP multicast groups known to this router."
+
+
+    ::= { ipMRoute1 2 }
+
+
+ipMRoute1Entry OBJECT-TYPE
+    SYNTAX     IpMRoute1Entry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry (conceptual row) containing the multicast routing
+            information for IP datagrams from a particular source and
+            addressed to a particular IP multicast group address.
+            Discontinuities in counters in this entry can be detected by
+            observing the value of ipMRoute1UpTime."
+    INDEX      { ipMRoute1Group,
+                 ipMRoute1Source,
+                 ipMRoute1SourceMask }
+    ::= { ipMRoute1Table 1 }
+
+IpMRoute1Entry ::= SEQUENCE {
+    ipMRoute1Group                 IpAddress,
+    ipMRoute1Source                IpAddress,
+    ipMRoute1SourceMask            IpAddress,
+    ipMRoute1UpstreamNeighbor      IpAddress,
+    ipMRoute1InIfIndex             InterfaceIndexOrZero,
+    ipMRoute1UpTime                TimeTicks,
+    ipMRoute1ExpiryTime            TimeTicks,
+    ipMRoute1Pkts                  Counter32,
+    ipMRoute1DifferentInIfPackets  Counter32,
+    ipMRoute1Octets                Counter32,
+    ipMRoute1Protocol              IpMRoute1Protocol,
+    ipMRoute1RtProto               INTEGER,
+    ipMRoute1RtAddress             IpAddress,
+    ipMRoute1RtMask                IpAddress,
+    ipMRoute1RtType                INTEGER,
+    ipMRoute1HCOctets              Counter64
+}
+
+ipMRoute1Group OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The IP multicast group address for which this entry
+            contains multicast routing information."
+    ::= { ipMRoute1Entry 1 }
+
+ipMRoute1Source OBJECT-TYPE
+    SYNTAX     IpAddress
+
+
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The network address which when combined with the
+            corresponding value of ipMRoute1SourceMask identifies the
+            sources for which this entry contains multicast routing
+            information."
+    ::= { ipMRoute1Entry 2 }
+
+ipMRoute1SourceMask OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The network mask which when combined with the corresponding
+            value of ipMRoute1Source identifies the sources for which
+            this entry contains multicast routing information."
+    ::= { ipMRoute1Entry 3 }
+
+ipMRoute1UpstreamNeighbor OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The address of the upstream neighbor (e.g., RPF neighbor)
+            from which IP datagrams from these sources to this multicast
+            address are received, or 0.0.0.0 if the upstream neighbor is
+            unknown (e.g., in CBT)."
+    ::= { ipMRoute1Entry 4 }
+
+ipMRoute1InIfIndex OBJECT-TYPE
+    SYNTAX     InterfaceIndexOrZero
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The value of ifIndex for the interface on which IP
+            datagrams sent by these sources to this multicast address
+            are received.  A value of 0 indicates that datagrams are not
+            subject to an incoming interface check, but may be accepted
+            on multiple interfaces (e.g., in CBT)."
+    ::= { ipMRoute1Entry 5 }
+
+ipMRoute1UpTime OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+
+
+    STATUS     current
+    DESCRIPTION
+            "The time since the multicast routing information
+            represented by this entry was learned by the router."
+    ::= { ipMRoute1Entry 6 }
+
+ipMRoute1ExpiryTime OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The minimum amount of time remaining before this entry will
+            be aged out.  The value 0 indicates that the entry is not
+            subject to aging."
+    ::= { ipMRoute1Entry 7 }
+
+ipMRoute1Pkts OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of packets which this router has received from
+            these sources and addressed to this multicast group
+            address."
+    ::= { ipMRoute1Entry 8 }
+
+ipMRoute1DifferentInIfPackets OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of packets which this router has received from
+            these sources and addressed to this multicast group address,
+            which were dropped because they were not received on the
+            interface indicated by ipMRoute1InIfIndex.  Packets which are
+            not subject to an incoming interface check (e.g., using CBT)
+            are not counted."
+    ::= { ipMRoute1Entry 9 }
+
+ipMRoute1Octets OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of octets contained in IP datagrams which were
+
+
+            received from these sources and addressed to this multicast
+            group address, and which were forwarded by this router."
+    ::= { ipMRoute1Entry 10 }
+
+ipMRoute1Protocol OBJECT-TYPE
+    SYNTAX     IpMRoute1Protocol
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The multicast routing protocol via which this multicast
+            forwarding entry was learned."
+    ::= { ipMRoute1Entry 11 }
+
+ipMRoute1RtProto OBJECT-TYPE
+    SYNTAX     INTEGER {
+                other     (1),  -- not specified
+                local     (2),  -- local interface
+                netmgmt   (3),  -- static route
+                icmp      (4),  -- result of ICMP Redirect
+                        -- the following are all dynamic
+                        -- routing protocols
+                egp        (5),  -- Exterior Gateway Protocol
+                ggp        (6),  -- Gateway-Gateway Protocol
+                hello      (7),  -- FuzzBall HelloSpeak
+                rip        (8),  -- Berkeley RIP or RIP-II
+                isIs       (9),  -- Dual IS-IS
+                esIs       (10), -- ISO 9542
+                ciscoIgrp  (11), -- Cisco IGRP
+                bbnSpfIgp  (12), -- BBN SPF IGP
+                ospf       (13), -- Open Shortest Path First
+                bgp        (14), -- Border Gateway Protocol
+                idpr       (15), -- InterDomain Policy Routing
+                ciscoEigrp (16), -- Cisco EIGRP
+                dvmrp      (17)  -- DVMRP
+               }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The routing mechanism via which the route used to find the
+            upstream or parent interface for this multicast forwarding
+            entry was learned.  Inclusion of values for routing
+            protocols is not intended to imply that those protocols need
+            be supported."
+    ::= { ipMRoute1Entry 12 }
+
+
+ipMRoute1RtAddress OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The address portion of the route used to find the upstream
+            or parent interface for this multicast forwarding entry."
+    ::= { ipMRoute1Entry 13 }
+
+ipMRoute1RtMask OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The mask associated with the route used to find the upstream
+            or parent interface for this multicast forwarding entry."
+    ::= { ipMRoute1Entry 14 }
+
+ipMRoute1RtType OBJECT-TYPE
+    SYNTAX     INTEGER {
+                unicast   (1), -- Unicast route used in multicast RIB
+                multicast (2)  -- Multicast route
+               }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The reason the given route was placed in the (logical)
+            multicast Routing Information Base (RIB).  A value of
+            unicast means that the route would normally be placed only
+            in the unicast RIB, but was placed in the multicast RIB
+            (instead or in addition) due to local configuration, such as
+            when running PIM over RIP.  A value of multicast means that
+            the route was explicitly added to the multicast RIB by the
+            routing protocol, such as DVMRP or Multiprotocol BGP."
+    ::= { ipMRoute1Entry 15 }
+
+ipMRoute1HCOctets OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of octets contained in IP datagrams which were
+            received from these sources and addressed to this multicast
+            group address, and which were forwarded by this router.
+            This object is a 64-bit version of ipMRoute1Octets."
+
+
+    ::= { ipMRoute1Entry 16 }
+
+--
+--  The IP Multicast Routing Next Hop Table
+--
+
+ipMRoute1NextHopTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF IpMRoute1NextHopEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The (conceptual) table containing information on the next-
+            hops on outgoing interfaces for routing IP multicast
+            datagrams.  Each entry is one of a list of next-hops on
+            outgoing interfaces for particular sources sending to a
+            particular multicast group address."
+
+
+    ::= { ipMRoute1 3 }
+
+ipMRoute1NextHopEntry OBJECT-TYPE
+    SYNTAX     IpMRoute1NextHopEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry (conceptual row) in the list of next-hops on
+            outgoing interfaces to which IP multicast datagrams from
+            particular sources to a IP multicast group address are
+            routed.  Discontinuities in counters in this entry can be
+            detected by observing the value of ipMRoute1UpTime."
+    INDEX      { ipMRoute1NextHopGroup, ipMRoute1NextHopSource,
+                 ipMRoute1NextHopSourceMask, ipMRoute1NextHopIfIndex,
+                 ipMRoute1NextHopAddress }
+    ::= { ipMRoute1NextHopTable 1 }
+
+
+IpMRoute1NextHopEntry ::= SEQUENCE {
+    ipMRoute1NextHopGroup              IpAddress,
+    ipMRoute1NextHopSource             IpAddress,
+    ipMRoute1NextHopSourceMask         IpAddress,
+    ipMRoute1NextHopIfIndex            InterfaceIndex,
+    ipMRoute1NextHopAddress            IpAddress,
+    ipMRoute1NextHopState              INTEGER,
+    ipMRoute1NextHopUpTime             TimeTicks,
+    ipMRoute1NextHopExpiryTime         TimeTicks,
+    ipMRoute1NextHopClosestMemberHops  Integer32,
+    ipMRoute1NextHopProtocol           IpMRoute1Protocol,
+    ipMRoute1NextHopPkts               Counter32
+}
+
+ipMRoute1NextHopGroup OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The IP multicast group for which this entry specifies a
+            next-hop on an outgoing interface."
+    ::= { ipMRoute1NextHopEntry 1 }
+
+ipMRoute1NextHopSource OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The network address which when combined with the
+            corresponding value of ipMRoute1NextHopSourceMask identifies
+            the sources for which this entry specifies a next-hop on an
+            outgoing interface."
+    ::= { ipMRoute1NextHopEntry 2 }
+
+ipMRoute1NextHopSourceMask OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The network mask which when combined with the corresponding
+            value of ipMRoute1NextHopSource identifies the sources for
+            which this entry specifies a next-hop on an outgoing
+            interface."
+    ::= { ipMRoute1NextHopEntry 3 }
+
+
+ipMRoute1NextHopIfIndex OBJECT-TYPE
+    SYNTAX     InterfaceIndex
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The ifIndex value of the interface for the outgoing
+            interface for this next-hop."
+    ::= { ipMRoute1NextHopEntry 4 }
+
+ipMRoute1NextHopAddress OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The address of the next-hop specific to this entry.  For
+            most interfaces, this is identical to ipMRoute1NextHopGroup.
+            NBMA interfaces, however, may have multiple next-hop
+            addresses out a single outgoing interface."
+    ::= { ipMRoute1NextHopEntry 5 }
+
+ipMRoute1NextHopState OBJECT-TYPE
+    SYNTAX     INTEGER { pruned(1), forwarding(2) }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "An indication of whether the outgoing interface and next-
+            hop represented by this entry is currently being used to
+            forward IP datagrams.  The value 'forwarding' indicates it
+            is currently being used; the value 'pruned' indicates it is
+            not."
+    ::= { ipMRoute1NextHopEntry 6 }
+
+ipMRoute1NextHopUpTime OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The time since the multicast routing information
+            represented by this entry was learned by the router."
+    ::= { ipMRoute1NextHopEntry 7 }
+
+ipMRoute1NextHopExpiryTime OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+
+
+    DESCRIPTION
+            "The minimum amount of time remaining before this entry will
+            be aged out.  If ipMRoute1NextHopState is pruned(1), the
+            remaining time until the prune expires and the state reverts
+            to forwarding(2).  Otherwise, the remaining time until this
+            entry is removed from the table.  The time remaining may be
+            copied from ipMRoute1ExpiryTime if the protocol in use for
+            this entry dos not specify next-hop timers.  The value 0
+            indicates that the entry is not subject to aging."
+    ::= { ipMRoute1NextHopEntry 8 }
+
+ipMRoute1NextHopClosestMemberHops OBJECT-TYPE
+    SYNTAX     Integer32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The minimum number of hops between this router and any
+            member of this IP multicast group reached via this next-hop
+            on this outgoing interface.  Any IP multicast datagrams for
+            the group which have a TTL less than this number of hops
+            will not be forwarded to this next-hop."
+    ::= { ipMRoute1NextHopEntry 9 }
+
+ipMRoute1NextHopProtocol OBJECT-TYPE
+    SYNTAX     IpMRoute1Protocol
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The routing mechanism via which this next-hop was learned."
+    ::= { ipMRoute1NextHopEntry 10 }
+
+ipMRoute1NextHopPkts OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of packets which have been forwarded using this
+            route."
+    ::= { ipMRoute1NextHopEntry 11 }
+
+
+--
+--  The Multicast Routing Interface Table
+--
+
+ipMRoute1InterfaceTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF IpMRoute1InterfaceEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The (conceptual) table containg multicast routing
+            information specific to interfaces."
+
+
+    ::= { ipMRoute1 4 }
+
+ipMRoute1InterfaceEntry OBJECT-TYPE
+    SYNTAX     IpMRoute1InterfaceEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry (conceptual row) containing the multicast routing
+            information for a particular interface."
+    INDEX      { ipMRoute1InterfaceIfIndex }
+    ::= { ipMRoute1InterfaceTable 1 }
+
+IpMRoute1InterfaceEntry ::= SEQUENCE {
+    ipMRoute1InterfaceIfIndex          InterfaceIndex,
+    ipMRoute1InterfaceTtl              Integer32,
+    ipMRoute1InterfaceProtocol         IpMRoute1Protocol,
+    ipMRoute1InterfaceRateLimit        Integer32,
+    ipMRoute1InterfaceInMcastOctets    Counter32,
+    ipMRoute1InterfaceOutMcastOctets   Counter32,
+    ipMRoute1InterfaceHCInMcastOctets  Counter64,
+    ipMRoute1InterfaceHCOutMcastOctets Counter64
+}
+
+ipMRoute1InterfaceIfIndex OBJECT-TYPE
+    SYNTAX     InterfaceIndex
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The ifIndex value of the interface for which this entry
+            contains information."
+    ::= { ipMRoute1InterfaceEntry 1 }
+
+ipMRoute1InterfaceTtl OBJECT-TYPE
+    SYNTAX     Integer32 (0..255)
+
+
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The datagram TTL threshold for the interface. Any IP
+            multicast datagrams with a TTL less than this threshold will
+            not be forwarded out the interface. The default value of 0
+            means all multicast packets are forwarded out the
+            interface."
+    ::= { ipMRoute1InterfaceEntry 2 }
+
+ipMRoute1InterfaceProtocol OBJECT-TYPE
+    SYNTAX     IpMRoute1Protocol
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The routing protocol running on this interface."
+    ::= { ipMRoute1InterfaceEntry 3 }
+
+ipMRoute1InterfaceRateLimit OBJECT-TYPE
+    SYNTAX     Integer32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The rate-limit, in kilobits per second, of forwarded
+            multicast traffic on the interface.  A rate-limit of 0
+            indicates that no rate limiting is done."
+    DEFVAL     { 0 }
+    ::= { ipMRoute1InterfaceEntry 4 }
+
+ipMRoute1InterfaceInMcastOctets OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of octets of multicast packets that have arrived
+            on the interface, including framing characters.  This object
+            is similar to ifInOctets in the Interfaces MIB, except that
+            only multicast packets are counted."
+    ::= { ipMRoute1InterfaceEntry 5 }
+
+ipMRoute1InterfaceOutMcastOctets OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+
+
+            "The number of octets of multicast packets that have been
+            sent on the interface."
+    ::= { ipMRoute1InterfaceEntry 6 }
+
+ipMRoute1InterfaceHCInMcastOctets OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of octets of multicast packets that have arrived
+            on the interface, including framing characters.  This object
+            is a 64-bit version of ipMRoute1InterfaceInMcastOctets.  It
+            is similar to ifHCInOctets in the Interfaces MIB, except
+            that only multicast packets are counted."
+    ::= { ipMRoute1InterfaceEntry 7 }
+
+ipMRoute1InterfaceHCOutMcastOctets OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of octets of multicast packets that have been
+            sent on the interface.  This object is a 64-bit version of
+            ipMRoute1InterfaceOutMcastOctets."
+    ::= { ipMRoute1InterfaceEntry 8 }
+
+
+--
+--  The IP Multicast Scope Boundary Table
+--
+
+ipMRoute1BoundaryTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF IpMRoute1BoundaryEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The (conceptual) table listing the router's scoped
+            multicast address boundaries."
+
+
+    ::= { ipMRoute1 5 }
+
+ipMRoute1BoundaryEntry OBJECT-TYPE
+    SYNTAX     IpMRoute1BoundaryEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry (conceptual row) in the ipMRoute1BoundaryTable
+            representing a scoped boundary."
+    INDEX      { ipMRoute1BoundaryIfIndex, ipMRoute1BoundaryAddress,
+                 ipMRoute1BoundaryAddressMask }
+    ::= { ipMRoute1BoundaryTable 1 }
+
+IpMRoute1BoundaryEntry ::= SEQUENCE {
+    ipMRoute1BoundaryIfIndex            InterfaceIndex,
+    ipMRoute1BoundaryAddress            IpAddress,
+    ipMRoute1BoundaryAddressMask        IpAddress,
+    ipMRoute1BoundaryStatus             RowStatus
+}
+
+ipMRoute1BoundaryIfIndex OBJECT-TYPE
+    SYNTAX     InterfaceIndex
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The IfIndex value for the interface to which this boundary
+            applies.  Packets with a destination address in the
+            associated address/mask range will not be forwarded out this
+            interface."
+    ::= { ipMRoute1BoundaryEntry 1 }
+
+ipMRoute1BoundaryAddress OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS not-accessible
+
+
+    STATUS     current
+    DESCRIPTION
+            "The group address which when combined with the
+            corresponding value of ipMRoute1BoundaryAddressMask
+            identifies the group range for which the scoped boundary
+            exists.  Scoped addresses must come from the range 239.x.x.x
+            as specified in RFC 2365."
+    ::= { ipMRoute1BoundaryEntry 2 }
+
+ipMRoute1BoundaryAddressMask OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The group address mask which when combined with the
+            corresponding value of ipMRoute1BoundaryAddress identifies
+            the group range for which the scoped boundary exists."
+    ::= { ipMRoute1BoundaryEntry 3 }
+
+ipMRoute1BoundaryStatus OBJECT-TYPE
+    SYNTAX     RowStatus
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The status of this row, by which new entries may be
+            created, or old entries deleted from this table."
+    ::= { ipMRoute1BoundaryEntry 4 }
+
+--
+--  The IP Multicast Scope Name Table
+--
+
+ipMRoute1ScopeNameTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF IpMRoute1ScopeNameEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The (conceptual) table listing the multicast scope names."
+
+
+    ::= { ipMRoute1 6 }
+
+ipMRoute1ScopeNameEntry OBJECT-TYPE
+    SYNTAX     IpMRoute1ScopeNameEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+
+
+    DESCRIPTION
+            "An entry (conceptual row) in the ipMRoute1ScopeNameTable
+            representing a multicast scope name."
+    INDEX      { ipMRoute1ScopeNameAddress,
+                 ipMRoute1ScopeNameAddressMask,
+                 IMPLIED ipMRoute1ScopeNameLanguage }
+    ::= { ipMRoute1ScopeNameTable 1 }
+
+IpMRoute1ScopeNameEntry ::= SEQUENCE {
+    ipMRoute1ScopeNameAddress            IpAddress,
+    ipMRoute1ScopeNameAddressMask        IpAddress,
+    ipMRoute1ScopeNameLanguage           DisplayString,
+    ipMRoute1ScopeNameString             SnmpAdminString,
+    ipMRoute1ScopeNameDefault            TruthValue,
+    ipMRoute1ScopeNameStatus             RowStatus
+}
+
+ipMRoute1ScopeNameAddress OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The group address which when combined with the
+            corresponding value of ipMRoute1ScopeNameAddressMask
+            identifies the group range associated with the multicast
+            scope.  Scoped addresses must come from the range
+            239.x.x.x."
+    ::= { ipMRoute1ScopeNameEntry 1 }
+
+ipMRoute1ScopeNameAddressMask OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The group address mask which when combined with the
+            corresponding value of ipMRoute1ScopeNameAddress identifies
+            the group range associated with the multicast scope."
+    ::= { ipMRoute1ScopeNameEntry 2 }
+
+ipMRoute1ScopeNameLanguage OBJECT-TYPE
+    SYNTAX     DisplayString (SIZE (1..8))
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An RFC 1766-style language tag, with all alphabetic
+
+
+            characters converted to lowercase.  This restriction is
+            intended to make the lexical ordering imposed by SNMP useful
+            when applied to language tags.  Note that it is
+            theoretically possible for a valid language tag to exceed
+            the allowed length of this object, and thus be impossible to
+            represent in this table.  Sampling of language tags in
+            current use on the Internet suggests that this limit does
+            not pose a serious problem in practice."
+    ::= { ipMRoute1ScopeNameEntry 3 }
+
+ipMRoute1ScopeNameString OBJECT-TYPE
+    SYNTAX     SnmpAdminString
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The textual name associated with the multicast scope.  The
+            value of this object should be suitable for displaying to
+            end-users, such as when allocating a multicast address in
+            this scope.  When no name is specified, the default value of
+            this object should be the string 239.x.x.x/y with x and y
+            replaced appropriately to describe the address and mask
+            length associated with the scope."
+    ::= { ipMRoute1ScopeNameEntry 4 }
+
+ipMRoute1ScopeNameDefault OBJECT-TYPE
+    SYNTAX     TruthValue
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "If true, indicates a preference that the name in the
+            following language should be used by applications if no name
+            is available in a desired language."
+    DEFVAL { false }
+    ::= { ipMRoute1ScopeNameEntry 5 }
+
+ipMRoute1ScopeNameStatus OBJECT-TYPE
+    SYNTAX     RowStatus
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The status of this row, by which new entries may be
+            created, or old entries deleted from this table."
+    ::= { ipMRoute1ScopeNameEntry 6 }
+
+
+-- conformance information
+
+ipMRoute1MIBConformance
+                  OBJECT IDENTIFIER ::= { ipMRoute1MIB 2 }
+ipMRoute1MIBCompliances
+                  OBJECT IDENTIFIER ::= { ipMRoute1MIBConformance 1 }
+ipMRoute1MIBGroups  OBJECT IDENTIFIER ::= { ipMRoute1MIBConformance 2 }
+
+-- compliance statements
+
+ipMRoute1MIBCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "The compliance statement for the IP Multicast MIB."
+    MODULE  -- this module
+    MANDATORY-GROUPS { ipMRoute1MIBBasicGroup,
+                       ipMRoute1MIBRouteGroup}
+
+        GROUP   ipMRoute1MIBBoundaryGroup
+        DESCRIPTION
+            "This group is mandatory if the router supports
+            administratively-scoped multicast address boundaries."
+
+        OBJECT      ipMRoute1BoundaryStatus
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      ipMRoute1ScopeNameStatus
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        GROUP   ipMRoute1MIBHCInterfaceGroup
+        DESCRIPTION
+            "This group is mandatory only for those network interfaces
+            for which the value of the corresponding instance of ifSpeed
+            is greater than 20,000,000 bits/second."
+
+    ::= { ipMRoute1MIBCompliances 1 }
+
+-- units of conformance
+
+
+ipMRoute1MIBBasicGroup OBJECT-GROUP
+    OBJECTS { ipMRoute1Enable, ipMRoute1EntryCount,
+              ipMRoute1UpstreamNeighbor, ipMRoute1InIfIndex,
+              ipMRoute1UpTime, ipMRoute1ExpiryTime,
+              ipMRoute1NextHopState,
+              ipMRoute1NextHopUpTime,
+              ipMRoute1NextHopExpiryTime,
+              ipMRoute1NextHopProtocol,
+              ipMRoute1NextHopPkts,
+              ipMRoute1InterfaceTtl,
+              ipMRoute1InterfaceProtocol, ipMRoute1InterfaceRateLimit,
+              ipMRoute1InterfaceInMcastOctets,
+              ipMRoute1InterfaceOutMcastOctets,
+              ipMRoute1Protocol
+            }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects to support basic management of IP
+            Multicast routing."
+    ::= { ipMRoute1MIBGroups 1 }
+
+ipMRoute1MIBHopCountGroup OBJECT-GROUP
+    OBJECTS { ipMRoute1NextHopClosestMemberHops }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects to support management of the use of
+            hop counts in IP Multicast routing."
+    ::= { ipMRoute1MIBGroups 2 }
+
+ipMRoute1MIBBoundaryGroup OBJECT-GROUP
+    OBJECTS { ipMRoute1BoundaryStatus, ipMRoute1ScopeNameString,
+              ipMRoute1ScopeNameDefault, ipMRoute1ScopeNameStatus }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects to support management of scoped
+            multicast address boundaries."
+    ::= { ipMRoute1MIBGroups 3 }
+
+ipMRoute1MIBPktsOutGroup OBJECT-GROUP
+    OBJECTS { ipMRoute1NextHopPkts }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects to support management of packet
+            counters for each outgoing interface entry of a route."
+    ::= { ipMRoute1MIBGroups 4 }
+
+
+ipMRoute1MIBHCInterfaceGroup OBJECT-GROUP
+    OBJECTS { ipMRoute1InterfaceHCInMcastOctets,
+              ipMRoute1InterfaceHCOutMcastOctets,
+              ipMRoute1HCOctets }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing information specific to
+            high speed (greater than 20,000,000 bits/second) network
+            interfaces."
+    ::= { ipMRoute1MIBGroups 5 }
+
+ipMRoute1MIBRouteGroup OBJECT-GROUP
+    OBJECTS { ipMRoute1RtProto, ipMRoute1RtAddress,
+              ipMRoute1RtMask, ipMRoute1RtType }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing information on the
+            relationship between multicast routing information, and the
+            IP Forwarding Table."
+    ::= { ipMRoute1MIBGroups 6 }
+
+ipMRoute1MIBPktsGroup OBJECT-GROUP
+    OBJECTS { ipMRoute1Pkts, ipMRoute1DifferentInIfPackets,
+              ipMRoute1Octets }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects to support management of packet
+            counters for each forwarding entry."
+    ::= { ipMRoute1MIBGroups 7 }
+
+END