Initial commitHEADmain

1 files changed, 1084 insertions, 0 deletions

diff --git a/MIBS/FRAME-RELAY-DTE-MIB b/MIBS/FRAME-RELAY-DTE-MIB
new file mode 100644
index 0000000..eb92aeb
--- /dev/null
+++ b/MIBS/FRAME-RELAY-DTE-MIB
@@ -0,0 +1,1084 @@
+     FRAME-RELAY-DTE-MIB DEFINITIONS ::= BEGIN
+
+     IMPORTS
+                 MODULE-IDENTITY, OBJECT-TYPE, Counter32,
+                 Integer32, NOTIFICATION-TYPE            FROM SNMPv2-SMI
+                 TEXTUAL-CONVENTION, RowStatus, TimeStamp FROM SNMPv2-TC
+                 MODULE-COMPLIANCE, OBJECT-GROUP,
+                 NOTIFICATION-GROUP                     FROM SNMPv2-CONF
+                 transmission                           FROM RFC1213-MIB
+                 InterfaceIndex                           FROM IF-MIB;
+
+     --  Frame Relay DTE MIB
+
+     frameRelayDTE MODULE-IDENTITY
+         LAST-UPDATED "9705010229Z" -- Thu May  1 02:29:46 PDT 1997
+         ORGANIZATION "IETF IPLPDN Working Group"
+         CONTACT-INFO
+            "       Caralyn Brown
+            Postal: Cadia Networks, Inc.
+                    1 Corporate Drive
+                    Andover, Massachusetts  01810
+            Tel:    +1 508 689 2400 x133
+            E-Mail: cbrown@cadia.com
+
+                    Fred Baker
+            Postal: Cisco Systems
+                    519 Lado Drive
+                    Santa Barbara, California 93111
+            Tel:    +1 408 526 425
+            E-Mail: fred@cisco.com"
+         DESCRIPTION
+            "The MIB module to describe the use of a Frame Relay
+            interface by a DTE."
+         REVISION "9705010229Z" -- Thu May  1 02:29:46 PDT 1997
+         DESCRIPTION
+            "Converted from SMIv1 to SMIv2. (Thus, indices are
+            read-only rather than being not-accessible.) Added
+            objects and made clarifications based on implementation
+            experience."
+
+         REVISION "9204010000Z"
+         DESCRIPTION
+            "Published as RFC 1315, the initial version of this MIB
+            module."
+         ::= { transmission 32 }
+
+
+     --
+     --      the range of a Data Link Connection Identifier
+     --
+     DLCI ::= TEXTUAL-CONVENTION
+         STATUS      current
+         DESCRIPTION
+            "The range of DLCI values.  Note that this varies by
+            interface configuration; normally, interfaces may use
+            0..1023, but may be configured to use ranges as large
+            as 0..2^23."
+         SYNTAX      Integer32(0..8388607)
+
+
+
+     --
+
+     --  Data Link Connection Management Interface
+
+     --      The variables that configure the DLC Management Interface.
+
+     frDlcmiTable OBJECT-TYPE
+         SYNTAX   SEQUENCE OF FrDlcmiEntry
+         MAX-ACCESS   not-accessible
+         STATUS   current
+         DESCRIPTION
+            "The Parameters for the Data Link Connection Management
+            Interface for the frame relay service on this
+            interface."
+         REFERENCE
+            "American National Standard T1.617-1991, Annex D"
+         ::= { frameRelayDTE 1 }
+
+     frDlcmiEntry OBJECT-TYPE
+         SYNTAX   FrDlcmiEntry
+         MAX-ACCESS   not-accessible
+         STATUS   current
+         DESCRIPTION
+            "The Parameters for a particular Data Link Connection
+            Management Interface."
+         INDEX { frDlcmiIfIndex }
+         ::= { frDlcmiTable 1 }
+
+
+
+
+
+     FrDlcmiEntry ::=
+         SEQUENCE {
+             frDlcmiIfIndex                  InterfaceIndex,
+             frDlcmiState                    INTEGER,
+             frDlcmiAddress                  INTEGER,
+             frDlcmiAddressLen               INTEGER,
+             frDlcmiPollingInterval          Integer32,
+             frDlcmiFullEnquiryInterval      Integer32,
+             frDlcmiErrorThreshold           Integer32,
+             frDlcmiMonitoredEvents          Integer32,
+             frDlcmiMaxSupportedVCs          DLCI,
+             frDlcmiMulticast                INTEGER,
+             frDlcmiStatus                   INTEGER,
+             frDlcmiRowStatus                RowStatus
+     }
+
+
+     frDlcmiIfIndex OBJECT-TYPE
+
+         SYNTAX   InterfaceIndex
+         MAX-ACCESS   read-only
+         STATUS   current
+         DESCRIPTION
+            "The ifIndex value of the corresponding ifEntry."
+         ::= { frDlcmiEntry 1 }
+
+
+     frDlcmiState OBJECT-TYPE
+         SYNTAX INTEGER      {
+             noLmiConfigured (1),
+             lmiRev1         (2),
+             ansiT1617D      (3),  -- ANSI T1.617 Annex D
+             ansiT1617B      (4),  -- ANSI T1.617 Annex B
+             itut933A        (5),  -- CCITT Q933 Annex A
+             ansiT1617D1994  (6)   -- ANSI T1.617a-1994 Annex D
+         }
+         MAX-ACCESS   read-create
+         STATUS   current
+         DESCRIPTION
+            "This variable states which Data Link Connection
+            Management scheme is active (and by implication, what
+            DLCI it uses) on the Frame Relay interface."
+         REFERENCE
+            "American National Standard T1.617-1991, American
+            National Standard T1.617a-1994, ITU-T Recommendation
+            Q.933 (03/93)."
+
+         ::= { frDlcmiEntry 2 }
+
+
+     frDlcmiAddress OBJECT-TYPE
+         SYNTAX      INTEGER {
+                     q921           (1),  -- 13 bit DLCI
+                     q922March90    (2),  -- 11 bit DLCI
+                     q922November90 (3),  -- 10 bit DLCI
+                     q922           (4)   -- Final Standard
+         }
+         MAX-ACCESS  read-create
+         STATUS  current
+         DESCRIPTION
+            "This variable states which address format is in use on
+            the Frame Relay interface."
+         ::= { frDlcmiEntry 3 }
+
+
+     frDlcmiAddressLen OBJECT-TYPE
+         SYNTAX  INTEGER     {
+                 twoOctets (2),
+                 threeOctets (3),
+                 fourOctets (4)
+         }
+         MAX-ACCESS  read-create
+         STATUS  current
+         DESCRIPTION
+            "This variable states the address length in octets.  In
+            the case of Q922 format, the length indicates the
+            entire length of the address including the control
+            portion."
+         ::= { frDlcmiEntry 4 }
+
+
+     frDlcmiPollingInterval OBJECT-TYPE
+         SYNTAX   Integer32 (5..30)
+         UNITS    "seconds"
+         MAX-ACCESS   read-create
+         STATUS   current
+         DESCRIPTION
+            "This is the number of seconds between successive
+            status enquiry messages."
+         REFERENCE
+            "American National Standard T1.617-1991, Section D.7
+            Timer T391."
+         DEFVAL { 10 }
+         ::= { frDlcmiEntry 5 }
+
+
+     frDlcmiFullEnquiryInterval OBJECT-TYPE
+         SYNTAX   Integer32 (1..255)
+         MAX-ACCESS   read-create
+         STATUS   current
+         DESCRIPTION
+            "Number of status enquiry intervals that pass before
+            issuance of a full status enquiry message."
+         REFERENCE
+            "American National Standard T1.617-1991, Section D.7
+            Counter N391."
+         DEFVAL { 6 }
+         ::= { frDlcmiEntry 6 }
+
+
+     frDlcmiErrorThreshold OBJECT-TYPE
+         SYNTAX   Integer32 (1..10)
+         MAX-ACCESS   read-create
+         STATUS   current
+         DESCRIPTION
+            "This is the maximum number of unanswered Status
+            Enquiries the equipment shall accept before declaring
+            the interface down."
+         REFERENCE
+            "American National Standard T1.617-1991, Section D.5.1
+            Counter N392."
+         DEFVAL { 3 }
+         ::= { frDlcmiEntry 7 }
+
+
+     frDlcmiMonitoredEvents OBJECT-TYPE
+         SYNTAX   Integer32 (1..10)
+         MAX-ACCESS   read-create
+         STATUS   current
+         DESCRIPTION
+            "This is the number of status polling intervals over
+            which the error threshold is counted.  For example, if
+            within 'MonitoredEvents' number of events the station
+            receives 'ErrorThreshold' number of errors, the
+            interface is marked as down."
+         REFERENCE
+            "American National Standard T1.617-1991, Section D.5.2
+            Counter N393."
+         DEFVAL { 4 }
+         ::= { frDlcmiEntry 8 }
+
+
+
+
+     frDlcmiMaxSupportedVCs OBJECT-TYPE
+         SYNTAX   DLCI
+         MAX-ACCESS   read-create
+         STATUS   current
+         DESCRIPTION
+            "The maximum number of Virtual Circuits allowed for
+            this interface.  Usually dictated by the Frame Relay
+            network.
+
+            In response to a SET, if a value less than zero or
+            higher than the agent's maximal capability is
+            configured, the agent should respond badValue"
+         ::= { frDlcmiEntry 9 }
+
+
+     frDlcmiMulticast OBJECT-TYPE
+         SYNTAX   INTEGER    {
+                     nonBroadcast (1),
+                     broadcast (2)
+                     }
+         MAX-ACCESS   read-create
+         STATUS   current
+         DESCRIPTION
+            "This indicates whether the Frame Relay interface is
+            using a multicast service."
+         ::= { frDlcmiEntry 10 }
+
+
+
+     frDlcmiStatus OBJECT-TYPE
+         SYNTAX   INTEGER    {
+                     running      (1),    -- init complete, system running
+                     fault        (2),    -- error threshold exceeded
+                     initializing (3)     -- system start up
+                     }
+         MAX-ACCESS   read-only
+         STATUS   current
+         DESCRIPTION
+            "This indicates the status of the Frame Relay interface
+            as determined by the performance of the dlcmi.  If no
+            dlcmi is running, the Frame Relay interface will stay
+            in the running state indefinitely."
+         ::= { frDlcmiEntry 11 }
+
+
+
+
+
+     frDlcmiRowStatus OBJECT-TYPE
+         SYNTAX   RowStatus
+         MAX-ACCESS   read-create
+         STATUS   current
+         DESCRIPTION
+            "SNMP Version 2 Row Status Variable.  Writable objects
+            in the table may be written in any RowStatus state."
+         ::= { frDlcmiEntry 12 }
+
+
+     --
+     -- A Frame Relay service is a multiplexing service.  Data
+     -- Link Connection Identifiers enumerate virtual circuits
+     -- (permanent or dynamic) which are layered onto the underlying
+     -- circuit, represented by ifEntry.  Therefore, each of the entries
+     -- in the Standard MIB's Interface Table with an IfType of
+     -- Frame Relay represents a Q.922 interface.  Zero or more
+     -- virtual circuits are layered onto this interface and provide
+     -- interconnection with various remote destinations.
+     -- Each such virtual circuit is represented by an entry in the
+     -- circuit table.  The management virtual circuit (i.e. DLCI 0)
+     -- is a virtual circuit by this definition and will be represented
+     -- with an entry in the circuit table.
+
+     --   Circuit Table
+
+     -- The table describing the use of the DLCIs attached to
+     -- each Frame Relay Interface.
+
+     frCircuitTable OBJECT-TYPE
+         SYNTAX   SEQUENCE OF FrCircuitEntry
+         MAX-ACCESS   not-accessible
+         STATUS   current
+         DESCRIPTION
+            "A table containing information about specific Data
+            Link Connections (DLC) or virtual circuits."
+         ::= { frameRelayDTE 2 }
+
+
+
+
+
+
+
+
+
+
+
+     frCircuitEntry OBJECT-TYPE
+         SYNTAX   FrCircuitEntry
+         MAX-ACCESS   not-accessible
+         STATUS   current
+         DESCRIPTION
+            "The information regarding a single Data Link
+            Connection.  Discontinuities in the counters contained
+            in this table are indicated by the value in
+            frCircuitCreationTime."
+         INDEX { frCircuitIfIndex, frCircuitDlci }
+         ::= { frCircuitTable 1 }
+
+
+     FrCircuitEntry ::=
+         SEQUENCE {
+             frCircuitIfIndex                InterfaceIndex,
+             frCircuitDlci                   DLCI,
+             frCircuitState                  INTEGER,
+             frCircuitReceivedFECNs          Counter32,
+             frCircuitReceivedBECNs          Counter32,
+             frCircuitSentFrames             Counter32,
+             frCircuitSentOctets             Counter32,
+             frCircuitReceivedFrames         Counter32,
+             frCircuitReceivedOctets         Counter32,
+             frCircuitCreationTime           TimeStamp,
+             frCircuitLastTimeChange         TimeStamp,
+             frCircuitCommittedBurst         Integer32,
+             frCircuitExcessBurst            Integer32,
+             frCircuitThroughput             Integer32,
+             frCircuitMulticast              INTEGER,
+             frCircuitType                   INTEGER,
+             frCircuitDiscards               Counter32,
+             frCircuitReceivedDEs            Counter32,
+             frCircuitSentDEs                Counter32,
+             frCircuitLogicalIfIndex         InterfaceIndex,
+             frCircuitRowStatus              RowStatus
+     }
+
+
+     frCircuitIfIndex OBJECT-TYPE
+         SYNTAX   InterfaceIndex
+         MAX-ACCESS   read-only
+         STATUS   current
+         DESCRIPTION
+            "The ifIndex Value of the ifEntry this virtual circuit
+            is layered onto."
+         ::= { frCircuitEntry 1 }
+
+
+     frCircuitDlci OBJECT-TYPE
+         SYNTAX   DLCI
+         MAX-ACCESS   read-only
+         STATUS   current
+         DESCRIPTION
+            "The Data Link Connection Identifier for this virtual
+            circuit."
+         REFERENCE
+            "American National Standard T1.618-1991, Section 3.3.6"
+         ::= { frCircuitEntry 2 }
+
+
+     frCircuitState OBJECT-TYPE
+         SYNTAX   INTEGER    {
+
+                     invalid (1),
+                     active (2),
+                     inactive (3)
+                  }
+         MAX-ACCESS   read-create
+         STATUS   current
+         DESCRIPTION
+            "Indicates whether the particular virtual circuit is
+            operational.  In the absence of a Data Link Connection
+            Management Interface, virtual circuit entries (rows)
+            may be created by setting virtual circuit state to
+            'active', or deleted by changing Circuit state to
+            'invalid'.
+
+            Whether or not the row actually disappears is left to
+            the implementation, so this object may actually read as
+            'invalid' for some arbitrary length of time.  It is
+            also legal to set the state of a virtual circuit to
+            'inactive' to temporarily disable a given circuit.
+
+            The use of 'invalid' is deprecated in this SNMP Version
+            2 MIB, in favor of frCircuitRowStatus."
+         DEFVAL { active }
+         ::= { frCircuitEntry 3 }
+
+
+
+
+
+
+
+
+     frCircuitReceivedFECNs OBJECT-TYPE
+         SYNTAX   Counter32
+         MAX-ACCESS   read-only
+         STATUS   current
+         DESCRIPTION
+            "Number of frames received from the network indicating
+            forward congestion since the virtual circuit was
+            created.  This occurs when the remote DTE sets the FECN
+            flag, or when a switch in the network enqueues the
+            frame to a trunk whose transmission queue is
+            congested."
+         REFERENCE
+            "American National Standard T1.618-1991, Section 3.3.3"
+         ::= { frCircuitEntry 4 }
+
+
+     frCircuitReceivedBECNs OBJECT-TYPE
+         SYNTAX   Counter32
+         MAX-ACCESS   read-only
+
+
+         STATUS   current
+         DESCRIPTION
+            "Number of frames received from the network indicating
+            backward congestion since the virtual circuit was
+            created.  This occurs when the remote DTE sets the BECN
+            flag, or when a switch in the network receives the
+            frame from a trunk whose transmission queue is
+            congested."
+         REFERENCE
+            "American National Standard T1.618-1991, Section 3.3.4"
+         ::= { frCircuitEntry 5 }
+
+
+     frCircuitSentFrames OBJECT-TYPE
+         SYNTAX   Counter32
+         MAX-ACCESS   read-only
+         STATUS   current
+         DESCRIPTION
+            "The number of frames sent from this virtual circuit
+            since it was created."
+         ::= { frCircuitEntry 6 }
+
+
+     frCircuitSentOctets OBJECT-TYPE
+         SYNTAX   Counter32
+         MAX-ACCESS   read-only
+         STATUS   current
+         DESCRIPTION
+            "The number of octets sent from this virtual circuit
+            since it was created.  Octets counted are the full
+            frame relay header and the payload, but do not include
+            the flag characters or CRC."
+         ::= { frCircuitEntry 7 }
+
+
+     frCircuitReceivedFrames OBJECT-TYPE
+         SYNTAX   Counter32
+         MAX-ACCESS   read-only
+         STATUS   current
+         DESCRIPTION
+            "Number of frames received over this virtual circuit
+            since it was created."
+         ::= { frCircuitEntry 8 }
+
+
+     frCircuitReceivedOctets OBJECT-TYPE
+         SYNTAX   Counter32
+         MAX-ACCESS   read-only
+         STATUS   current
+         DESCRIPTION
+            "Number of octets received over this virtual circuit
+            since it was created.  Octets counted include the full
+            frame relay header, but do not include the flag
+            characters or the CRC."
+         ::= { frCircuitEntry 9 }
+
+
+     frCircuitCreationTime OBJECT-TYPE
+         SYNTAX   TimeStamp
+         MAX-ACCESS   read-only
+         STATUS   current
+         DESCRIPTION
+            "The value of sysUpTime when the virtual circuit was
+            created, whether by the Data Link Connection Management
+            Interface or by a SetRequest."
+         ::= { frCircuitEntry 10 }
+
+
+
+
+
+
+
+
+
+     frCircuitLastTimeChange OBJECT-TYPE
+         SYNTAX   TimeStamp
+         MAX-ACCESS   read-only
+         STATUS   current
+         DESCRIPTION
+            "The value of sysUpTime when last there was a change in
+            the virtual circuit state"
+         ::= { frCircuitEntry 11 }
+
+
+     frCircuitCommittedBurst OBJECT-TYPE
+         SYNTAX   Integer32(0..2147483647)
+         MAX-ACCESS   read-create
+         STATUS   current
+         DESCRIPTION
+            "This variable indicates the maximum amount of data, in
+            bits, that the network agrees to transfer under normal
+            conditions, during the measurement interval."
+         REFERENCE
+            "American National Standard T1.617-1991, Section
+            6.5.19"
+         DEFVAL   { 0 }  -- the default indicates no commitment
+         ::= { frCircuitEntry 12 }
+
+
+     frCircuitExcessBurst OBJECT-TYPE
+         SYNTAX   Integer32(0..2147483647)
+         MAX-ACCESS   read-create
+         STATUS   current
+         DESCRIPTION
+            "This variable indicates the maximum amount of
+            uncommitted data bits that the network will attempt to
+            deliver over the measurement interval.
+
+            By default, if not configured when creating the entry,
+            the Excess Information Burst Size is set to the value
+            of ifSpeed."
+         REFERENCE
+            "American National Standard T1.617-1991, Section
+            6.5.19"
+         ::= { frCircuitEntry 13 }
+
+
+     frCircuitThroughput OBJECT-TYPE
+         SYNTAX   Integer32(0..2147483647)
+         MAX-ACCESS   read-create
+         STATUS   current
+         DESCRIPTION
+            "Throughput is the average number of 'Frame Relay
+            Information Field' bits transferred per second across a
+            user network interface in one direction, measured over
+            the measurement interval.
+
+            If the configured committed burst rate and throughput
+            are both non-zero, the measurement interval, T, is
+                T=frCircuitCommittedBurst/frCircuitThroughput.
+
+            If the configured committed burst rate and throughput
+            are both zero, the measurement interval, T, is
+                       T=frCircuitExcessBurst/ifSpeed."
+         REFERENCE
+            "American National Standard T1.617-1991, Section
+            6.5.19"
+         DEFVAL {0}  -- the default value of Throughput is
+                     -- "no commitment".
+         ::= { frCircuitEntry 14 }
+
+
+     frCircuitMulticast OBJECT-TYPE
+         SYNTAX   INTEGER    {
+                     unicast   (1),
+                     oneWay    (2),
+                     twoWay    (3),
+                     nWay      (4)
+                     }
+         MAX-ACCESS   read-create
+         STATUS   current
+         DESCRIPTION
+            "This indicates whether this VC is used as a unicast VC
+            (i.e. not multicast) or the type of multicast service
+            subscribed to"
+         REFERENCE
+            "Frame Relay PVC Multicast Service and Protocol
+            Description Implementation: FRF.7 Frame Relay Forum
+            Technical Committe October 21, 1994"
+              DEFVAL {unicast}
+                          -- the default value of frCircuitMulticast is
+                          -- "unicast" (not a multicast VC).
+              ::= { frCircuitEntry 15 }
+
+
+     frCircuitType OBJECT-TYPE
+         SYNTAX   INTEGER    {
+                     static  (1),
+                     dynamic (2)
+                  }
+         MAX-ACCESS   read-only
+         STATUS   current
+         DESCRIPTION
+            "Indication of whether the VC was manually created
+            (static), or dynamically created (dynamic) via the data
+            link control management interface."
+         ::= { frCircuitEntry 16 }
+
+
+     frCircuitDiscards OBJECT-TYPE
+         SYNTAX   Counter32
+         MAX-ACCESS   read-only
+         STATUS   current
+         DESCRIPTION
+            "The number of inbound frames dropped because of format
+            errors, or because the VC is inactive."
+         ::= { frCircuitEntry 17 }
+
+
+     frCircuitReceivedDEs OBJECT-TYPE
+         SYNTAX   Counter32
+         MAX-ACCESS   read-only
+         STATUS   current
+         DESCRIPTION
+            "Number of frames received from the network indicating
+            that they were eligible for discard since the virtual
+            circuit was created.  This occurs when the remote DTE
+            sets the DE flag, or when in remote DTE's switch
+            detects that the frame was received as Excess Burst
+            data."
+         REFERENCE
+            "American National Standard T1.618-1991, Section 3.3.4"
+         ::= { frCircuitEntry 18 }
+
+
+     frCircuitSentDEs OBJECT-TYPE
+         SYNTAX   Counter32
+         MAX-ACCESS   read-only
+         STATUS   current
+         DESCRIPTION
+            "Number of frames sent to the network indicating that
+            they were eligible for discard since the virtual
+            circuit was created.   This occurs when the local DTE
+            sets the DE flag, indicating that during Network
+            congestion situations those frames should be discarded
+            in preference of other frames sent without the DE bit
+            set."
+         REFERENCE
+            "American National  Standard  T1.618-1991, Section
+            3.3.4"
+        ::= { frCircuitEntry 19 }
+
+     frCircuitLogicalIfIndex OBJECT-TYPE
+         SYNTAX  InterfaceIndex
+         MAX-ACCESS read-create
+         STATUS  current
+         DESCRIPTION
+            "Normally the same value as frDlcmiIfIndex, but
+            different when an implementation associates a virtual
+            ifEntry with a DLC or set of DLCs in order to associate
+            higher layer objects such as the ipAddrEntry with a
+            subset of the virtual circuits on a Frame Relay
+            interface. The type of such ifEntries is defined by the
+            higher layer object; for example, if PPP/Frame Relay is
+            implemented, the ifType of this ifEntry would be PPP.
+            If it is not so defined, as would be the case with an
+            ipAddrEntry, it should be of type Other."
+        ::= { frCircuitEntry 20 }
+
+     frCircuitRowStatus OBJECT-TYPE
+         SYNTAX   RowStatus
+         MAX-ACCESS   read-create
+         STATUS   current
+         DESCRIPTION
+            "This object is used to create a new row or modify or
+            destroy an existing row in the manner described in the
+            definition of the RowStatus textual convention.
+            Writable objects in the table may be written in any
+            RowStatus state."
+         ::= { frCircuitEntry 21 }
+
+
+     --
+     --  Error Table
+
+     -- The table describing errors encountered on each Frame
+     -- Relay Interface.
+
+     frErrTable OBJECT-TYPE
+         SYNTAX   SEQUENCE OF FrErrEntry
+         MAX-ACCESS   not-accessible
+         STATUS   current
+         DESCRIPTION
+            "A table containing information about Errors on the
+            Frame Relay interface.  Discontinuities in the counters
+            contained in this table are the same as apply to the
+            ifEntry associated with the Interface."
+         ::= { frameRelayDTE 3 }
+
+     frErrEntry OBJECT-TYPE
+         SYNTAX   FrErrEntry
+         MAX-ACCESS   not-accessible
+         STATUS   current
+         DESCRIPTION
+            "The error information for a single frame relay
+            interface."
+         INDEX { frErrIfIndex }
+         ::= { frErrTable 1 }
+
+
+     FrErrEntry ::=
+         SEQUENCE {
+             frErrIfIndex            InterfaceIndex,
+             frErrType               INTEGER,
+             frErrData               OCTET STRING,
+             frErrTime               TimeStamp,
+             frErrFaults             Counter32,
+             frErrFaultTime          TimeStamp
+     }
+
+
+     frErrIfIndex OBJECT-TYPE
+         SYNTAX   InterfaceIndex
+         MAX-ACCESS   read-only
+         STATUS   current
+         DESCRIPTION
+            "The ifIndex Value of the corresponding ifEntry."
+         ::= { frErrEntry 1 }
+
+
+         frErrType OBJECT-TYPE
+             SYNTAX   INTEGER    {
+                         unknownError(1),
+                         receiveShort(2),
+                         receiveLong(3),
+                         illegalAddress(4),
+                         unknownAddress(5),
+                         dlcmiProtoErr(6),
+                         dlcmiUnknownIE(7),
+                         dlcmiSequenceErr(8),
+                         dlcmiUnknownRpt(9),
+                         noErrorSinceReset(10)
+                      }
+
+         MAX-ACCESS   read-only
+         STATUS   current
+         DESCRIPTION
+     "The type of error that was last seen  on  this interface:
+
+     receiveShort: frame was not long enough to allow
+             demultiplexing - the address field was incomplete,
+             or for virtual circuits using Multiprotocol over
+             Frame Relay, the protocol identifier was missing
+             or incomplete.
+
+     receiveLong: frame exceeded maximum length configured for this
+                  interface.
+
+     illegalAddress: address field did not match configured format.
+
+     unknownAddress: frame received on a virtual circuit which was not
+                     active or administratively disabled.
+
+     dlcmiProtoErr: unspecified error occurred when attempting to
+                    interpret link maintenance frame.
+
+     dlcmiUnknownIE: link maintenance frame contained an Information
+                     Element type which is not valid for the
+                     configured link maintenance protocol.
+
+     dlcmiSequenceErr: link maintenance frame contained a sequence
+                       number other than the expected value.
+
+     dlcmiUnknownRpt: link maintenance frame contained a Report Type
+                      Information Element whose value was not valid
+                      for the configured link maintenance protocol.
+
+     noErrorSinceReset: no errors have been detected since the last
+                        cold start or warm start."
+         ::= { frErrEntry 2 }
+
+
+     frErrData OBJECT-TYPE
+         SYNTAX   OCTET STRING (SIZE(1..1600))
+         MAX-ACCESS   read-only
+         STATUS   current
+         DESCRIPTION
+            "An octet string containing as much of the error packet
+            as possible.  As a minimum, it must contain the Q.922
+            Address or as much as was delivered.  It is desirable
+            to include all header and demultiplexing information."
+         ::= { frErrEntry 3 }
+
+
+     frErrTime OBJECT-TYPE
+         SYNTAX   TimeStamp
+         MAX-ACCESS   read-only
+         STATUS   current
+         DESCRIPTION
+            "The value of sysUpTime at which the error was
+            detected."
+         ::= { frErrEntry 4 }
+
+
+     frErrFaults OBJECT-TYPE
+         SYNTAX   Counter32
+         MAX-ACCESS   read-only
+         STATUS   current
+         DESCRIPTION
+            "The number of times the interface has gone down since
+            it was initialized."
+         ::= { frErrEntry 5 }
+
+
+     frErrFaultTime OBJECT-TYPE
+         SYNTAX   TimeStamp
+         MAX-ACCESS   read-only
+         STATUS   current
+         DESCRIPTION
+            "The value of sysUpTime at the time when the interface
+            was taken down due to excessive errors.  Excessive
+            errors is defined as the time when a DLCMI exceeds the
+            frDlcmiErrorThreshold number of errors within
+            frDlcmiMonitoredEvents. See FrDlcmiEntry for further
+            details."
+         ::= { frErrEntry 6 }
+
+
+     --
+
+     -- Frame Relay Trap Control
+
+     frameRelayTrapControl OBJECT IDENTIFIER ::= { frameRelayDTE 4 }
+
+     -- the following highly unusual OID is as it is for compatibility
+     -- with RFC 1315, the SNMP V1 predecessor of this document.
+     frameRelayTraps OBJECT IDENTIFIER ::= { frameRelayDTE 0 }
+
+
+
+     frTrapState OBJECT-TYPE
+         SYNTAX  INTEGER     { enabled(1), disabled(2) }
+         MAX-ACCESS   read-write
+         STATUS   current
+         DESCRIPTION
+            "This variable indicates whether the system produces
+            the frDLCIStatusChange trap."
+         DEFVAL { disabled }
+         ::= { frameRelayTrapControl 1 }
+
+     frTrapMaxRate OBJECT-TYPE
+         SYNTAX  Integer32 (0..3600000)
+         MAX-ACCESS   read-write
+         STATUS   current
+         DESCRIPTION
+            "This variable indicates the number of milliseconds
+            that must elapse between trap emissions.  If events
+            occur more rapidly, the impementation may simply fail
+            to trap, or may queue traps until an appropriate time."
+         DEFVAL { 0 }        -- no minimum elapsed period is specified
+         ::= { frameRelayTrapControl 2 }
+
+
+
+     --  Data Link Connection Management Interface Related Traps
+
+     frDLCIStatusChange NOTIFICATION-TYPE
+         OBJECTS  { frCircuitState }
+         STATUS      current
+
+
+         DESCRIPTION
+            "This trap indicates that the indicated Virtual Circuit
+            has changed state.  It has either been created or
+            invalidated, or has toggled between the active and
+            inactive states.  If, however, the reason for the state
+            change is due to the DLCMI going down, per-DLCI traps
+            should not be generated."
+     ::= { frameRelayTraps 1 }
+     -- conformance information
+
+     frConformance OBJECT IDENTIFIER ::= { frameRelayDTE 6 }
+
+     frGroups      OBJECT IDENTIFIER ::= { frConformance 1 }
+     frCompliances OBJECT IDENTIFIER ::= { frConformance 2 }
+
+     -- compliance statements
+
+     frCompliance MODULE-COMPLIANCE
+         STATUS  current
+         DESCRIPTION
+            "The compliance statement "
+         MODULE  -- this module
+         MANDATORY-GROUPS { frPortGroup, frCircuitGroup }
+
+         GROUP       frErrGroup
+         DESCRIPTION
+            "This optional group is used for debugging Frame Relay
+            Systems."
+
+         GROUP       frTrapGroup
+         DESCRIPTION
+            "This optional group is used for the management of
+            asynchronous notifications by Frame Relay Systems."
+
+         GROUP       frNotificationGroup
+         DESCRIPTION
+            "This optional group defines the asynchronous
+            notifications generated by Frame Relay Systems."
+
+         OBJECT      frDlcmiRowStatus
+         MIN-ACCESS  read-only
+         DESCRIPTION
+            "Row creation is not required for the frDlcmiTable."
+
+         OBJECT      frCircuitRowStatus
+
+         MIN-ACCESS  read-only
+         DESCRIPTION
+            "Row creation is not required for the frCircuitTable."
+
+         ::= { frCompliances 1 }
+
+     frCompliance0 MODULE-COMPLIANCE
+         STATUS  current
+         DESCRIPTION
+            "The compliance statement for objects and the trap
+            defined in RFC 1315."
+         MODULE  -- this module
+         MANDATORY-GROUPS { frPortGroup0, frCircuitGroup0 }
+
+         GROUP       frErrGroup0
+         DESCRIPTION
+            "This optional group is used for debugging Frame Relay
+            Systems."
+
+         GROUP       frTrapGroup0
+         DESCRIPTION
+            "This optional group is used for the management of
+            asynchronous notifications by Frame Relay Systems."
+
+         GROUP       frNotificationGroup
+         DESCRIPTION
+            "This optional group defines the asynchronous
+            notifications generated by Frame Relay Systems."
+
+         ::= { frCompliances 2 }
+
+     -- units of conformance
+
+     frPortGroup    OBJECT-GROUP
+         OBJECTS {
+                   frDlcmiIfIndex, frDlcmiState, frDlcmiAddress,
+                   frDlcmiAddressLen, frDlcmiPollingInterval,
+                   frDlcmiFullEnquiryInterval, frDlcmiErrorThreshold,
+                   frDlcmiMonitoredEvents, frDlcmiMaxSupportedVCs,
+                   frDlcmiMulticast, frDlcmiStatus, frDlcmiRowStatus
+                }
+         STATUS  current
+         DESCRIPTION
+            "The objects necessary to control the Link Management
+            Interface for a Frame Relay Interface as well as
+            maintain the error statistics on this interface."
+         ::= { frGroups 1 }
+
+     frCircuitGroup    OBJECT-GROUP
+         OBJECTS {
+                   frCircuitIfIndex, frCircuitDlci, frCircuitState,
+                   frCircuitReceivedFECNs, frCircuitReceivedBECNs,
+                   frCircuitSentFrames, frCircuitSentOctets,
+                   frCircuitReceivedFrames, frCircuitReceivedOctets,
+                   frCircuitCreationTime, frCircuitLastTimeChange,
+                   frCircuitCommittedBurst, frCircuitExcessBurst,
+                   frCircuitThroughput, frCircuitMulticast,
+                   frCircuitType, frCircuitDiscards,
+                   frCircuitReceivedDEs, frCircuitSentDEs,
+                   frCircuitLogicalIfIndex, frCircuitRowStatus
+                 }
+         STATUS  current
+         DESCRIPTION
+            "The objects necessary to control the Virtual Circuits
+            layered onto a Frame Relay Interface."
+         ::= { frGroups 2 }
+
+     frTrapGroup    OBJECT-GROUP
+         OBJECTS { frTrapState, frTrapMaxRate }
+         STATUS  current
+         DESCRIPTION
+            "The objects necessary to control a Frame Relay
+            Interface's notification messages."
+         ::= { frGroups 3 }
+
+     frErrGroup    OBJECT-GROUP
+         OBJECTS {
+                   frErrIfIndex, frErrType, frErrData, frErrTime,
+                   frErrFaults, frErrFaultTime
+                }
+         STATUS  current
+         DESCRIPTION
+            "Objects designed to assist in debugging Frame Relay
+            Interfaces."
+         ::= { frGroups 4 }
+
+     frNotificationGroup NOTIFICATION-GROUP
+         NOTIFICATIONS { frDLCIStatusChange }
+         STATUS  current
+         DESCRIPTION
+            "Traps which may be used to enhance event driven
+            management of the interface."
+         ::= { frGroups 5 }
+
+     frPortGroup0    OBJECT-GROUP
+         OBJECTS {
+                   frDlcmiIfIndex, frDlcmiState, frDlcmiAddress,
+                   frDlcmiAddressLen, frDlcmiPollingInterval,
+                   frDlcmiFullEnquiryInterval, frDlcmiErrorThreshold,
+                   frDlcmiMonitoredEvents, frDlcmiMaxSupportedVCs,
+                   frDlcmiMulticast
+                }
+         STATUS  current
+         DESCRIPTION
+            "The objects necessary to control the Link Management
+            Interface for a Frame Relay Interface as well as
+            maintain the error statistics on this interface from
+            RFC 1315."
+         ::= { frGroups 6 }
+
+     frCircuitGroup0    OBJECT-GROUP
+         OBJECTS {
+                   frCircuitIfIndex, frCircuitDlci, frCircuitState,
+                   frCircuitReceivedFECNs, frCircuitReceivedBECNs,
+                   frCircuitSentFrames, frCircuitSentOctets,
+                   frCircuitReceivedFrames, frCircuitReceivedOctets,
+                   frCircuitCreationTime, frCircuitLastTimeChange,
+                   frCircuitCommittedBurst, frCircuitExcessBurst,
+                   frCircuitThroughput
+                 }
+         STATUS  current
+         DESCRIPTION
+            "The objects necessary to control the Virtual Circuits
+            layered onto a Frame Relay Interface from RFC 1315."
+         ::= { frGroups 7 }
+
+     frErrGroup0    OBJECT-GROUP
+         OBJECTS {
+                   frErrIfIndex, frErrType, frErrData, frErrTime
+                }
+         STATUS  current
+         DESCRIPTION
+            "Objects designed to assist in debugging Frame Relay
+            Interfaces from RFC 1315."
+         ::= { frGroups 8 }
+
+
+     frTrapGroup0    OBJECT-GROUP
+         OBJECTS { frTrapState }
+         STATUS  current
+         DESCRIPTION
+            "The objects necessary to control a Frame Relay
+            Interface's notification messages from RFC 1315."
+         ::= { frGroups 9 }
+
+     END