diff options
| author | David Leutgeb <david.leutgeb@mannundmouse.com> | 2023-12-05 12:25:34 +0100 |
|---|---|---|
| committer | David Leutgeb <david.leutgeb@mannundmouse.com> | 2023-12-05 12:25:34 +0100 |
| commit | 98a672123c7872f6b9b75a9a2b6bb3aea504de6a (patch) | |
| tree | 9b13bd7f563c3198047bd359195327cf28b3caf0 /MIBS/ATM-FORUM-M4-MIB | |
| download | mibs-main.tar.gz mibs-main.zip | |
Diffstat (limited to 'MIBS/ATM-FORUM-M4-MIB')
| -rw-r--r-- | MIBS/ATM-FORUM-M4-MIB | 4119 |
1 files changed, 4119 insertions, 0 deletions
diff --git a/MIBS/ATM-FORUM-M4-MIB b/MIBS/ATM-FORUM-M4-MIB new file mode 100644 index 0000000..0a07c40 --- /dev/null +++ b/MIBS/ATM-FORUM-M4-MIB @@ -0,0 +1,4119 @@ +ATM-FORUM-M4-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, + NOTIFICATION-TYPE, OBJECT-IDENTITY, + Counter32, Integer32, IpAddress, + Unsigned32 FROM SNMPv2-SMI + TEXTUAL-CONVENTION, DisplayString, + AutonomousType, RowStatus, TestAndIncr, + RowPointer, TruthValue, TimeStamp, + DateAndTime, TimeInterval FROM SNMPv2-TC + MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF + ifIndex, OwnerString FROM IF-MIB + atmForum FROM ATM-FORUM-TC-MIB + atmVplEntry, atmVclEntry, atmVpCrossConnectEntry, + atmVcCrossConnectEntry, atmVplVpi, + atmVclVpi, atmVclVci, + atmVpCrossConnectIndex, atmVpCrossConnectLowIfIndex, + atmVpCrossConnectLowVpi, atmVpCrossConnectHighIfIndex, + atmVpCrossConnectHighVpi, atmVcCrossConnectIndex, + atmVcCrossConnectLowIfIndex, atmVcCrossConnectLowVpi, + atmVcCrossConnectLowVci, atmVcCrossConnectHighIfIndex, + atmVcCrossConnectHighVpi, atmVcCrossConnectHighVci + FROM ATM-MIB + entPhysicalIndex, entPhysicalClass, entPhysicalContainedIn, + entPhysicalParentRelPos + FROM ENTITY-MIB + hrSWInstalledIndex, + hrSWInstalledName FROM HOST-RESOURCES-MIB; + + +atmfM4MIB MODULE-IDENTITY + LAST-UPDATED "9701210000Z" + ORGANIZATION "ATM Forum" + CONTACT-INFO + " Andrew G. Malis + Postal: Ascend Communications, Inc. + 5 Carlisle Road + Westford MA 01886 + USA + Tel: +1 508 952 7414 + Fax: +1 508 392 9250 + E-Mail: malis@ascend.com" + DESCRIPTION + "This MIB module is the SNMP version of the ATM Forum's + M4 interface (network element view)." + ::= { atmForum 100 } + +atmfM4MIBObjects OBJECT IDENTIFIER ::= { atmfM4MIB 1 } +atmfM4MIBTraps OBJECT IDENTIFIER ::= { atmfM4MIB 2 } +atmfM4MIBCompliance OBJECT IDENTIFIER ::= { atmfM4MIB 3 } + + +-- This MIB module consists of the following groups: +-- (1) ATM NE High-Level Objects +-- (2) Interfaces: Physical Path Termination Point Table +-- (3) TC Adaptor Table +-- (4) ATM Cell Layer Interface Table +-- (5) VPL Termination Point Table Extensions +-- (6) VCL Termination Point Table Extensions +-- (7) VP Cross-Connect Table Extensions +-- (8) VC Cross-Connect Table Extensions +-- (9) VP 'next VPI' Table +-- (10) VC 'next VCI' Table +-- (11) ATM Cell Protocol Monitoring Current Data Table +-- (12) ATM Cell Protocol Monitoring History Data Table +-- (13) ATM Cell Protocol Monitoring Error Log Table +-- (14) TC Adaptor Protocol Monitoring Current Data Table +-- (15) TC Adaptor Protocol Monitoring History Data Table +-- (16) VPL UPC/NPC Disagreement Monitoring Current Data Table +-- (17) VPL UPC/NPC Disagreement Monitoring History Data Table +-- (18) VCL UPC/NPC Disagreement Monitoring Current Data Table +-- (19) VCL UPC/NPC Disagreement Monitoring History Data Table +-- (20) OAM Loopback Test Definitions +-- (21) VPL/VPC Termination Point Test Table +-- (22) VCL/VCC Termination Point Test Table +-- (23) Equipment Table extension +-- (24) Equipment Holder Table extension +-- (25) Plug-In Unit Table extension +-- (26) Hardware Unit/Running Software Relationship Table +-- (27) Hardware Unit/Installed Software Relationship Table +-- (28) Alarm Forwarding Discriminator Table +-- (29) Trap Log Table +-- (30) Trap Log Entry Table +-- (31) Alarm Trap Log Entry Table extension +-- (32) Notifications (traps) +-- (33) Conformance statements + + +-- ATM Forum M4 ATM network element (NE) high-level objects + +atmfM4NeVendor OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The vendor of the ATM network element." + ::= { atmfM4MIBObjects 1 } + +atmfM4NeVersion OBJECT-TYPE + SYNTAX AutonomousType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The version of the ATM network element." + ::= { atmfM4MIBObjects 2 } + +atmfM4NeStartTime OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The time at which the agent was last started; in other + words, the time at which sysUpTime was zero." + ::= { atmfM4MIBObjects 3 } + +atmfM4NeAlarmSeverityIndex OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "An index into the alarm severity profile table, specifying + the severity assignments for M4 alarms reported for the + ATM network element." + DEFVAL { 0 } + ::= { atmfM4MIBObjects 4 } + +atmfM4NeSuppressZeroStats OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "When the value of this object is true, no entry will be + created in any of the the historical statistics tables for + intervals in which all counts are zero." + DEFVAL { true } + ::= { atmfM4MIBObjects 5 } + + +-- ATM Forum M4 Interface Configuration Table Extensions +-- Physical Path Termination Point Layer + +atmfM4PhysPathTpTable OBJECT-TYPE + SYNTAX SEQUENCE OF AtmfM4PhysPathTpEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The ATM Forum M4 interface Configuration table extensions + for the physical path termination point." + ::= { atmfM4MIBObjects 6 } + +atmfM4PhysPathTpEntry OBJECT-TYPE + SYNTAX AtmfM4PhysPathTpEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Columns conceptually added to the interface table + entry for an ATM interface to model the physical path + termination point. + + The row of the interface table modeling this object should + also include columns for the TC Adaptor object and the ATM + interface table defined in RFC 1695. + + The interface table entry for the physical path TP + fields of an ATM interface are set up without management + system control (or else that setup is outside the + scope of M4)." + INDEX { ifIndex } + ::= { atmfM4PhysPathTpTable 1 } + +AtmfM4PhysPathTpEntry ::= SEQUENCE { + atmfM4PhysPathTpHwUnitIndex Integer32, + atmfM4PhysPathTpPortID Integer32, + atmfM4PhysPathTpAlarmSeverityIndex Integer32 + } + +atmfM4PhysPathTpHwUnitIndex OBJECT-TYPE + SYNTAX Integer32 (1..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the index of the entry in the entPhysicalTable + that represents the device (i.e., card) on which the + physical path terminates." + ::= { atmfM4PhysPathTpEntry 1 } + +atmfM4PhysPathTpPortID OBJECT-TYPE + SYNTAX Integer32 (1..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Identifies the port (within the card identified by the + hardware unit index) on which the physical path terminates." + ::= { atmfM4PhysPathTpEntry 2 } + +atmfM4PhysPathTpAlarmSeverityIndex OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies the index of the entry in the communications + alarm severity profile table that should be used." + DEFVAL { 0 } + ::= { atmfM4PhysPathTpEntry 3 } + + +-- ATM Forum M4 Interface Configuration Table Extensions +-- TC Adaptor Layer + +atmfM4TcAdaptorTable OBJECT-TYPE + SYNTAX SEQUENCE OF AtmfM4TcAdaptorEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The ATM Forum M4 interface Configuration table extensions + for the TC Adaptor." + ::= { atmfM4MIBObjects 7 } + +atmfM4TcAdaptorEntry OBJECT-TYPE + SYNTAX AtmfM4TcAdaptorEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Columns conceptually added to the interface table + entry for an ATM interface to model the TC Adaptor. + + The row of the interface table modeling this object should + also include columns for the physical path TP and the ATM + interface table defined in RFC 1695. + + The interface table entry for the TC Adaptor + fields of an ATM interface are set up without management + system control (or else that setup is outside the + scope of M4)." + INDEX { ifIndex } + ::= { atmfM4TcAdaptorTable 1 } + +AtmfM4TcAdaptorEntry ::= SEQUENCE { + atmfM4TcACellScrambling TruthValue, + atmfM4TcAlarmSeverityIndex Integer32 + } + +atmfM4TcACellScrambling OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This attribute is used by the management system to + activate and deactivate the ATM cell scrambling function. + When the value of this attribute is TRUE, cell scrambling + on the interface is activated. + + This attribute shall be present only for interfaces that + support the deactivation of cell scrambling. The ATM Forum + UNI specification requires cell scrambling for ATM/SONET + interfaces but allows cell scrambling to be controlled + (i.e., turned on and off) for ATM/DS3 interfaces." + DEFVAL { true } + ::= { atmfM4TcAdaptorEntry 1 } + +atmfM4TcAlarmSeverityIndex OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies the index of the entry in the communications + alarm severity profile table that should be used." + DEFVAL { 0 } + ::= { atmfM4TcAdaptorEntry 2 } + + +-- ATM Forum M4 Interface Configuration Table Extensions +-- ATM Cell Layer + +atmfM4AtmLayerTable OBJECT-TYPE + SYNTAX SEQUENCE OF AtmfM4AtmLayerEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The ATM Forum M4 interface Configuration table extensions + for the ATM cell layer." + ::= { atmfM4MIBObjects 8 } + +atmfM4AtmLayerEntry OBJECT-TYPE + SYNTAX AtmfM4AtmLayerEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Columns conceptually added to the interface table + entry for an ATM interface to model the ATM cell layer. + The row of the interface table modeling this object should + also include columns for the physical path TP and TC Adaptor + object, as well as the ATM interface table defined in + RFC 1695. + + The default configuration of an entry in this table is + used whenever the entries for the physical path TP, etc., + are created. The management system configures a UNI, + B-ICI, or B-ISSI on the interface by first modifying the + atmfM4IfType column (this can be done in the same SNMP + set-request that sets up the other necessary variables." + INDEX { ifIndex } + ::= { atmfM4AtmLayerTable 1 } + +AtmfM4AtmLayerEntry ::= SEQUENCE { + atmfM4IfType INTEGER, + atmfM4IfLoopbackLocationCode Integer32, + atmfM4IfSubscriberAddress DisplayString, + atmfM4IfPreferredCarrier DisplayString, + atmfM4IfFarEndCarrierNetwork DisplayString + } + +atmfM4IfType OBJECT-TYPE + SYNTAX INTEGER { + none(0), + uni(1), + bici(2), + bissi(3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies the type of ATM cell-layer interface defined + on the physical path termination point modeled by this + entry in the interface table." + DEFVAL { none } + ::= { atmfM4AtmLayerEntry 1 } + +atmfM4IfLoopbackLocationCode OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies the code that shall exist in incoming OAM + Loopback cells that are to be looped back at this + interface. + + A value of zero shall indicate that the management system + has not set any loopback location code for this interface. + Therefore, zero should not be used as the actual loopback + location code for any interface. + + This object shall be present only for table entries that + represent an actual ATM cell layer interface (i.e., the + atmM4IfType is not none(0))." + DEFVAL { 0 } + ::= { atmfM4AtmLayerEntry 2 } + +atmfM4IfSubscriberAddress OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies the address or newline-delimited list of + addresses assigned to the UNI. + + This object shall be present only for table entries that + represent an UNI interface." + DEFVAL { "" } + ::= { atmfM4AtmLayerEntry 3 } + +atmfM4IfPreferredCarrier OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies the name of the default carrier to use when one + is not explicitly identified in the call set-up message. + + This object shall be present only for table entries that + represent an UNI interface and only when SVC services are + supported." + DEFVAL { "" } + ::= { atmfM4AtmLayerEntry 4 } + +atmfM4IfFarEndCarrierNetwork OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies the adjacent carrier to which the B-ICI + transmission path is connected. + + This object shall be present only for table entries that + represent an B-ICI interface and only when SVC services are + supported." + DEFVAL { "" } + ::= { atmfM4AtmLayerEntry 5 } + + + + +-- ATM Forum M4 VPL Termination Point Configuration Table Extensions + +atmfM4VplTable OBJECT-TYPE + SYNTAX SEQUENCE OF AtmfM4VplEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The ATM Forum M4 VPL Termination Point Configuration + table extensions. This table augments the VPL + configuration table in RFC 1695." + ::= { atmfM4MIBObjects 9 } + +atmfM4VplEntry OBJECT-TYPE + SYNTAX AtmfM4VplEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Additional columns for the VPL configuration table entry." + AUGMENTS { atmVplEntry } + ::= { atmfM4VplTable 1 } + +AtmfM4VplEntry ::= SEQUENCE { + atmfM4VplSegEndPt TruthValue + } + +atmfM4VplSegEndPt OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Specifies whether the VPL termination point is a segment + end-point." + ::= { atmfM4VplEntry 1 } + + +-- ATM Forum M4 VCL Termination Point Configuration Table Extensions + +atmfM4VclTable OBJECT-TYPE + SYNTAX SEQUENCE OF AtmfM4VclEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The ATM Forum M4 VCL Termination Point Configuration + table extensions. This table augments the VCL + configuration table in RFC 1695." + ::= { atmfM4MIBObjects 10 } + +atmfM4VclEntry OBJECT-TYPE + SYNTAX AtmfM4VclEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Additional columns for the VCL configuration table entry." + AUGMENTS { atmVclEntry } + ::= { atmfM4VclTable 1 } + +AtmfM4VclEntry ::= SEQUENCE { + atmfM4VclSegEndPt TruthValue + } + +atmfM4VclSegEndPt OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Specifies whether the VCL termination point is a segment + end-point." + ::= { atmfM4VclEntry 1 } + + +-- ATM Forum M4 VP Cross-Connect Table Extensions + +atmfM4VpXConnTable OBJECT-TYPE + SYNTAX SEQUENCE OF AtmfM4VpXConnEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The ATM Forum M4 VP Cross-Connect Configuration + table extensions. This table augments the VP Cross-Connect + configuration table in RFC 1695." + ::= { atmfM4MIBObjects 11 } + +atmfM4VpXConnEntry OBJECT-TYPE + SYNTAX AtmfM4VpXConnEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Additional columns for the VP Cross-Connect table entry." + AUGMENTS { atmVpCrossConnectEntry } + ::= { atmfM4VpXConnTable 1 } + +AtmfM4VpXConnEntry ::= SEQUENCE { + atmfM4VpXConnRecover TruthValue + } + +atmfM4VpXConnRecover OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "If FALSE, this cross-connection will be removed on + failure." + ::= { atmfM4VpXConnEntry 1 } + + +-- ATM Forum M4 VC Cross-Connect Table Extensions + +atmfM4VcXConnTable OBJECT-TYPE + SYNTAX SEQUENCE OF AtmfM4VcXConnEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The ATM Forum M4 VC Cross-Connect Configuration + table extensions. This table augments the VC Cross-Connect + configuration table in RFC 1695." + ::= { atmfM4MIBObjects 12 } + +atmfM4VcXConnEntry OBJECT-TYPE + SYNTAX AtmfM4VcXConnEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Additional columns for the VC Cross-Connect table entry." + AUGMENTS { atmVcCrossConnectEntry } + ::= { atmfM4VcXConnTable 1 } + +AtmfM4VcXConnEntry ::= SEQUENCE { + atmfM4VcXConnRecover TruthValue + } + +atmfM4VcXConnRecover OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "If FALSE, this cross-connection will be removed on + failure." + ::= { atmfM4VcXConnEntry 1 } + + +-- ATM Forum M4 VP "Next VPI" Table + +atmfM4VpNextVpiTable OBJECT-TYPE + SYNTAX SEQUENCE OF AtmfM4VpNextVpiEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The ATM Forum M4 VP Next-VPI value + table. This optional table supplied unused VPI values + for use in creating entries in the atmVplTable." + ::= { atmfM4MIBObjects 13 } + +atmfM4VpNextVpiEntry OBJECT-TYPE + SYNTAX AtmfM4VpNextVpiEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry in this table represents the 'next' VPI + value available for a given ATM interface. + + Each ATM interface (UNI, BICI, BISSI) automatically has + an entry in this table associated with it." + INDEX { ifIndex } + ::= { atmfM4VpNextVpiTable 1 } + +AtmfM4VpNextVpiEntry ::= SEQUENCE { + atmfM4VpNextVpiValue INTEGER + } + +atmfM4VpNextVpiValue OBJECT-TYPE + SYNTAX INTEGER (-1..4095) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object contains an appropriate value to be used for + atmVplVpi when creating entries in the atmVplTable. The + value -1 indicates that no unassigned entries are available. + To obtain the atmVplVpi value for a new entry, the manager + issues a management protocol retrieval operation to obtain + the current value of this object. After each retrieval, the + agent should modify the value to the next unassigned index + (or -1)." + ::= { atmfM4VpNextVpiEntry 1 } + + +-- ATM Forum M4 VC "Next VCI" Table + +atmfM4VcNextVciTable OBJECT-TYPE + SYNTAX SEQUENCE OF AtmfM4VcNextVciEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The ATM Forum M4 VC Next-VCI value + table. This optional table supplied unused VCI values + for use in creating entries in the atmVclTable." + ::= { atmfM4MIBObjects 14 } + +atmfM4VcNextVciEntry OBJECT-TYPE + SYNTAX AtmfM4VcNextVciEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry in this table represents the 'next' VCI + value available for a given ATM interface. + + Each VPL Termination Point automatically has + an entry in this table associated with it." + INDEX { ifIndex, + atmVplVpi } + ::= { atmfM4VcNextVciTable 1 } + +AtmfM4VcNextVciEntry ::= SEQUENCE { + atmfM4VcNextVciValue INTEGER + } + +atmfM4VcNextVciValue OBJECT-TYPE + SYNTAX INTEGER (-1..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object contains an appropriate value to be used for + atmVclVci when creating entries in the atmVclTable. The + value -1 indicates that no unassigned entries are available. + To obtain the atmVclVci value for a new entry, the manager + issues a management protocol retrieval operation to obtain + the current value of this object. After each retrieval, the + agent should modify the value to the next unassigned index + (or -1)." + ::= { atmfM4VcNextVciEntry 1 } + + +-- ATM Cell Protocol Monitoring Current Data (per interface) + +atmfM4CellProtoCurrTable OBJECT-TYPE + SYNTAX SEQUENCE OF AtmfM4CellProtoCurrEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The ATM Forum M4 Cell Protocol Monitoring Current Data + table. + + This table maintains per-interface statistics for the + fifteen-minute interval currently being collected." + ::= { atmfM4MIBObjects 15 } + +atmfM4CellProtoCurrEntry OBJECT-TYPE + SYNTAX AtmfM4CellProtoCurrEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in the ATM Forum M4 Cell Protocol Monitoring + Current Data table. + + Each ATM interface (UNI, BICI, BISSI) automatically has + an entry in this table associated with it." + INDEX { ifIndex } + ::= { atmfM4CellProtoCurrTable 1 } + +AtmfM4CellProtoCurrEntry ::= SEQUENCE { + atmfM4CellProtoCurrSuspect TruthValue, + atmfM4CellProtoCurrElapsedTime TimeInterval, + atmfM4CellProtoCurrSupprIntvls Counter32, + atmfM4CellProtoCurrProtoErrors Counter32, + atmfM4CellProtoCurrInOAMCells Counter32 + } + +atmfM4CellProtoCurrSuspect OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "If true, the statistics in this entry may be unreliable." + ::= { atmfM4CellProtoCurrEntry 1 } + +atmfM4CellProtoCurrElapsedTime OBJECT-TYPE + SYNTAX TimeInterval + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Amount of time, measured in units of 0.01 second, that + statistics for this entry (the current interval) have been + counted." + ::= { atmfM4CellProtoCurrEntry 2 } + +atmfM4CellProtoCurrSupprIntvls OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This attribute is non-zero only if the ATM NE is + suppressing ATM Cell Protocol Monitoring History Data + entry creation when the current interval terminates with + 'all-zeroes' performance measurements." + ::= { atmfM4CellProtoCurrEntry 3 } + +atmfM4CellProtoCurrProtoErrors OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of ATM cells dropped on this interface, due to + an unrecognized field or set of fields in the ATM cell + header, since the start of this interval." + ::= { atmfM4CellProtoCurrEntry 4 } + +atmfM4CellProtoCurrInOAMCells OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of OAM cells received at this interface since + the start of this interval." + ::= { atmfM4CellProtoCurrEntry 5 } + + +-- ATM Cell Protocol Monitoring History Data (per interface and time +-- interval) + +atmfM4CellProtoHistTable OBJECT-TYPE + SYNTAX SEQUENCE OF AtmfM4CellProtoHistEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The ATM Forum M4 Cell Protocol Monitoring History Data + table. + + This table maintains per-interface statistics for previous + fifteen-minute intervals." + ::= { atmfM4MIBObjects 16 } + +atmfM4CellProtoHistEntry OBJECT-TYPE + SYNTAX AtmfM4CellProtoHistEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in the ATM Forum M4 Cell Protocol Monitoring + History Data table. + + Each ATM interface (UNI, BICI, BISSI) automatically has + an entry in this table associated with it for each fifteen- + minute interval in which statistics are collected for it." + INDEX { ifIndex, + atmfM4CellProtoHistIndex } + ::= { atmfM4CellProtoHistTable 1 } + + +AtmfM4CellProtoHistEntry ::= SEQUENCE { + atmfM4CellProtoHistIndex INTEGER, + atmfM4CellProtoHistSuspect TruthValue, + atmfM4CellProtoHistElapsedTime TimeInterval, + atmfM4CellProtoHistSupprIntvls Counter32, + atmfM4CellProtoHistProtoErrors Counter32, + atmfM4CellProtoHistInOAMCells Counter32 + } + +atmfM4CellProtoHistIndex OBJECT-TYPE + SYNTAX INTEGER (1..96) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A number between 1 and 96, which identifies the interval + for which the set of statistics in this entry was + collected. + + The interval identified by 1 is the most recently completed + 15 minute interval, and the interval identified by N is the + interval immediately preceding the one identified by N-1." + ::= { atmfM4CellProtoHistEntry 1 } + +atmfM4CellProtoHistSuspect OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "If true, the statistics in this entry may be unreliable." + ::= { atmfM4CellProtoHistEntry 2 } + +atmfM4CellProtoHistElapsedTime OBJECT-TYPE + SYNTAX TimeInterval + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Amount of time, measured in units of 0.01 second, that + statistics for this entry (the current interval) have been + counted." + ::= { atmfM4CellProtoHistEntry 3 } + +atmfM4CellProtoHistSupprIntvls OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This attribute is non-zero only if the ATM NE is + suppressing ATM Cell Protocol Monitoring History Data + entry creation when the current interval terminates with + 'all-zeroes' performance measurements." + ::= { atmfM4CellProtoHistEntry 4 } + +atmfM4CellProtoHistProtoErrors OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of ATM cells dropped on this interface, due to + an unrecognized field or set of fields in the ATM cell + header, since the start of this interval." + ::= { atmfM4CellProtoHistEntry 5 } + +atmfM4CellProtoHistInOAMCells OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of OAM cells received at this interface since + the start of this interval." + ::= { atmfM4CellProtoHistEntry 6 } + + +-- ATM Cell Protocol Monitoring Error Log (per interface, error code) + +atmfM4CellProtoErrorTable OBJECT-TYPE + SYNTAX SEQUENCE OF AtmfM4CellProtoErrorEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The ATM Forum M4 Cell Protocol Monitoring Error Log + table. + + This table maintains a record of the last error of each + type encountered on each interface, as a result of ATM + Cell Protocol Monitoring." + ::= { atmfM4MIBObjects 17 } + +atmfM4CellProtoErrorEntry OBJECT-TYPE + SYNTAX AtmfM4CellProtoErrorEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in the ATM Forum M4 Cell Protocol Monitoring + Error Log table. + + Each ATM interface (UNI, BICI, BISSI) automatically has + an entry in this table associated with it for each error + that has occurred since agent start-up." + INDEX { ifIndex, + atmfM4CellProtoErrorCode } + ::= { atmfM4CellProtoErrorTable 1 } + +AtmfM4CellProtoErrorEntry ::= SEQUENCE { + atmfM4CellProtoErrorCode Integer32, + atmfM4CellProtoErrorTime TimeStamp, + atmfM4CellProtoErrorReason Integer32, + atmfM4CellProtoErrorVpi INTEGER, + atmfM4CellProtoErrorVci INTEGER + } + +atmfM4CellProtoErrorCode OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Indicates the type of error for which this entry contains + information." + ::= { atmfM4CellProtoErrorEntry 1 } + +atmfM4CellProtoErrorTime OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Value of sysUpTime when the error occurred." + ::= { atmfM4CellProtoErrorEntry 2 } + +atmfM4CellProtoErrorReason OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The cell header abnormality type: the reason for + discarding the ATM cell (i.e., unassigned VPI/VCI value or + VPI/VCI value out of range." + ::= { atmfM4CellProtoErrorEntry 3 } + +atmfM4CellProtoErrorVpi OBJECT-TYPE + SYNTAX INTEGER (0..4096) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The VPI value of the discarded cell." + ::= { atmfM4CellProtoErrorEntry 4 } + +atmfM4CellProtoErrorVci OBJECT-TYPE + SYNTAX INTEGER (0..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The VCI value of the discarded cell." + ::= { atmfM4CellProtoErrorEntry 5 } + + +-- TC Adaptor Protocol Monitoring Current Data (per interface) + +atmfM4TcProtoCurrTable OBJECT-TYPE + SYNTAX SEQUENCE OF AtmfM4TcProtoCurrEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The ATM Forum M4 TC Adaptor Protocol Monitoring Current + Data table. + + This table maintains per-interface statistics for the + fifteen-minute interval currently being collected." + ::= { atmfM4MIBObjects 18 } + +atmfM4TcProtoCurrEntry OBJECT-TYPE + SYNTAX AtmfM4TcProtoCurrEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in the ATM Forum M4 TC Adaptor Protocol Monitoring + Current Data table. + + Each ATM interface (UNI, BICI, BISSI) automatically has + an entry in this table associated with it." + INDEX { ifIndex } + ::= { atmfM4TcProtoCurrTable 1 } + +AtmfM4TcProtoCurrEntry ::= SEQUENCE { + atmfM4TcProtoCurrSuspect TruthValue, + atmfM4TcProtoCurrElapsedTime TimeInterval, + atmfM4TcProtoCurrSupprIntvls Counter32, + atmfM4TcProtoCurrDiscardHECViol Counter32 + } + +atmfM4TcProtoCurrSuspect OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "If true, the statistics in this entry may be unreliable." + ::= { atmfM4TcProtoCurrEntry 1 } + +atmfM4TcProtoCurrElapsedTime OBJECT-TYPE + SYNTAX TimeInterval + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Amount of time, measured in units of 0.01 second, that + statistics for this entry (the current interval) have been + counted." + ::= { atmfM4TcProtoCurrEntry 2 } + +atmfM4TcProtoCurrSupprIntvls OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This attribute is non-zero only if the ATM NE is + suppressing ATM TC Adaptor Protocol Monitoring History Data + entry creation when the current interval terminates with + 'all-zeroes' performance measurements." + ::= { atmfM4TcProtoCurrEntry 3 } + +atmfM4TcProtoCurrDiscardHECViol OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of ATM cells discarded on this interface, due to + an HEC violation, since the start of this interval." + ::= { atmfM4TcProtoCurrEntry 4 } + + +-- ATM TC Adaptor Protocol Monitoring History Data (per interface and +-- time interval) + +atmfM4TcProtoHistTable OBJECT-TYPE + SYNTAX SEQUENCE OF AtmfM4TcProtoHistEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The ATM Forum M4 TC Adaptor Protocol Monitoring History + Data table. + + This table maintains per-interface statistics for previous + fifteen-minute intervals." + ::= { atmfM4MIBObjects 19 } + +atmfM4TcProtoHistEntry OBJECT-TYPE + SYNTAX AtmfM4TcProtoHistEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in the ATM Forum M4 TC Adaptor Protocol Monitoring + History Data table. + + Each ATM interface (UNI, BICI, BISSI) automatically has + an entry in this table associated with it for each fifteen- + minute interval in which statistics are collected for it." + INDEX { ifIndex, + atmfM4TcProtoHistIndex } + ::= { atmfM4TcProtoHistTable 1 } + +AtmfM4TcProtoHistEntry ::= SEQUENCE { + atmfM4TcProtoHistIndex INTEGER, + atmfM4TcProtoHistSuspect TruthValue, + atmfM4TcProtoHistElapsedTime TimeInterval, + atmfM4TcProtoHistSupprIntvls Unsigned32, + atmfM4TcProtoHistDiscardHECViol Unsigned32 + } + +atmfM4TcProtoHistIndex OBJECT-TYPE + SYNTAX INTEGER (1..96) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A number between 1 and 96, which identifies the interval + for which the set of statistics in this entry was + collected. + + The interval identified by 1 is the most recently completed + 15 minute interval, and the interval identified by N is the + interval immediately preceding the one identified by N-1." + ::= { atmfM4TcProtoHistEntry 1 } + +atmfM4TcProtoHistSuspect OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "If true, the statistics in this entry may be unreliable." + ::= { atmfM4TcProtoHistEntry 2 } + +atmfM4TcProtoHistElapsedTime OBJECT-TYPE + SYNTAX TimeInterval + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Amount of time, measured in units of 0.01 second, that + statistics for this entry (the current interval) have been + counted." + ::= { atmfM4TcProtoHistEntry 3 } + +atmfM4TcProtoHistSupprIntvls OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This attribute is non-zero only if the ATM NE is + suppressing ATM Cell Protocol Monitoring History Data + entry creation when the current interval terminates with + 'all-zeroes' performance measurements." + ::= { atmfM4TcProtoHistEntry 4 } + +atmfM4TcProtoHistDiscardHECViol OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of ATM cells discarded on this interface, due to + an HEC violation, since the start of this interval." + ::= { atmfM4TcProtoHistEntry 5 } + + +-- UPC/NPC Disagreement Monitoring Current Data (per VPL +-- termination point) + +atmfM4VpUpcNpcCurrTable OBJECT-TYPE + SYNTAX SEQUENCE OF AtmfM4VpUpcNpcCurrEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The ATM Forum M4 UPC/NPC Disagreement Monitoring Current + Data table for VPL termination points. + + This table maintains per-TP statistics for the + fifteen-minute interval currently being collected." + ::= { atmfM4MIBObjects 20 } + +atmfM4VpUpcNpcCurrEntry OBJECT-TYPE + SYNTAX AtmfM4VpUpcNpcCurrEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in the ATM Forum M4 UPC/NPC Disagreement + Monitoring Current Data table for VPL termination points. + + Each VPL Termination Point automatically has + an entry in this table associated with it." + INDEX { ifIndex, + atmVplVpi } + ::= { atmfM4VpUpcNpcCurrTable 1 } + +AtmfM4VpUpcNpcCurrEntry ::= SEQUENCE { + atmfM4VpUpcNpcCurrSuspect TruthValue, + atmfM4VpUpcNpcCurrElapsedTime TimeInterval, + atmfM4VpUpcNpcCurrSupprIntvls Counter32, + atmfM4VpUpcNpcCurrDiscardedCells Counter32, + atmfM4VpUpcNpcCurrDiscardedClp0 Counter32, + atmfM4VpUpcNpcCurrPassedCells Counter32, + atmfM4VpUpcNpcCurrPassedClp0 Counter32 + } + +atmfM4VpUpcNpcCurrSuspect OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "If true, the statistics in this entry may be unreliable." + ::= { atmfM4VpUpcNpcCurrEntry 1 } + +atmfM4VpUpcNpcCurrElapsedTime OBJECT-TYPE + SYNTAX TimeInterval + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Amount of time, measured in units of 0.01 second, that + statistics for this entry (the current interval) have been + counted." + ::= { atmfM4VpUpcNpcCurrEntry 2 } + +atmfM4VpUpcNpcCurrSupprIntvls OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This attribute is non-zero only if the ATM NE is + suppressing UPC/NPC Disagreement Monitoring History Data + entry creation when the current interval terminates with + 'all-zeroes' performance measurements." + ::= { atmfM4VpUpcNpcCurrEntry 3 } + +atmfM4VpUpcNpcCurrDiscardedCells OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of discarded cells due to combined CLP=0 and + CLP=1 UPC/NPC policing." + ::= { atmfM4VpUpcNpcCurrEntry 4 } + +atmfM4VpUpcNpcCurrDiscardedClp0 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of discarded cells due to CLP=0 only + UPC/NPC policing. + + This object shall be present only if CLP=0 traffic is + separately policed." + ::= { atmfM4VpUpcNpcCurrEntry 5 } + +atmfM4VpUpcNpcCurrPassedCells OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of cells that have been successfully passed by + the combined CLP=0 and CLP=1 UPC/NPC policing." + ::= { atmfM4VpUpcNpcCurrEntry 6 } + +atmfM4VpUpcNpcCurrPassedClp0 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of cells that have been successfully passed by + the CLP=0 UPC/NPC policing. + + This object shall be present only if CLP=0 traffic is + separately policed." + ::= { atmfM4VpUpcNpcCurrEntry 7 } + + +-- UPC/NPC Disagreement Monitoring History (per VPL termination +-- point and time interval) + +atmfM4VpUpcNpcHistTable OBJECT-TYPE + SYNTAX SEQUENCE OF AtmfM4VpUpcNpcHistEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The ATM Forum M4 UPC/NPC Disagreement Monitoring History + Data table for VPL termination points. + + This table maintains per-interface statistics for previous + fifteen-minute intervals." + ::= { atmfM4MIBObjects 21 } + +atmfM4VpUpcNpcHistEntry OBJECT-TYPE + SYNTAX AtmfM4VpUpcNpcHistEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in the ATM Forum M4 UPC/NPC Disagreement + Monitoring History Data table for VPL termination points. + + Each VPL Termination Point automatically has + an entry in this table associated with it." + INDEX { ifIndex, + atmVplVpi, + atmfM4VpUpcNpcHistIndex } + ::= { atmfM4VpUpcNpcHistTable 1 } + +AtmfM4VpUpcNpcHistEntry ::= SEQUENCE { + atmfM4VpUpcNpcHistIndex INTEGER, + atmfM4VpUpcNpcHistSuspect TruthValue, + atmfM4VpUpcNpcHistElapsedTime TimeInterval, + atmfM4VpUpcNpcHistSupprIntvls Unsigned32, + atmfM4VpUpcNpcHistDiscardedCells Unsigned32, + atmfM4VpUpcNpcHistDiscardedClp0 Unsigned32, + atmfM4VpUpcNpcHistPassedCells Unsigned32, + atmfM4VpUpcNpcHistPassedClp0 Unsigned32 + } + +atmfM4VpUpcNpcHistIndex OBJECT-TYPE + SYNTAX INTEGER (1..96) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A number between 1 and 96, which identifies the interval + for which the set of statistics in this entry was + collected. + + The interval identified by 1 is the most recently completed + 15 minute interval, and the interval identified by N is the + interval immediately preceding the one identified by N-1." + ::= { atmfM4VpUpcNpcHistEntry 1 } + +atmfM4VpUpcNpcHistSuspect OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "If true, the statistics in this entry may be unreliable." + ::= { atmfM4VpUpcNpcHistEntry 2 } + +atmfM4VpUpcNpcHistElapsedTime OBJECT-TYPE + SYNTAX TimeInterval + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Amount of time, measured in units of 0.01 second, that + statistics for this entry (the current interval) have been + counted." + ::= { atmfM4VpUpcNpcHistEntry 3 } + +atmfM4VpUpcNpcHistSupprIntvls OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This attribute is non-zero only if the ATM NE is + suppressing UPC/NPC Disagreement Monitoring History Data + entry creation when the current interval terminates with + 'all-zeroes' performance measurements." + ::= { atmfM4VpUpcNpcHistEntry 4 } + +atmfM4VpUpcNpcHistDiscardedCells OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of discarded cells due to combined CLP=0 and + CLP=1 UPC/NPC policing." + ::= { atmfM4VpUpcNpcHistEntry 5 } + +atmfM4VpUpcNpcHistDiscardedClp0 OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of discarded cells due to CLP=0 only + UPC/NPC policing. + + This object shall be present only if CLP=0 traffic is + separately policed." + ::= { atmfM4VpUpcNpcHistEntry 6 } + +atmfM4VpUpcNpcHistPassedCells OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of cells that have been successfully passed by + the combined CLP=0 and CLP=1 UPC/NPC policing." + ::= { atmfM4VpUpcNpcHistEntry 7 } + +atmfM4VpUpcNpcHistPassedClp0 OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of cells that have been successfully passed by + the CLP=0 UPC/NPC policing. + + This object shall be present only if CLP=0 traffic is + separately policed." + ::= { atmfM4VpUpcNpcHistEntry 8 } + + + +-- UPC/NPC Disagreement Monitoring Current Data (per VCL +-- termination point) + +atmfM4VcUpcNpcCurrTable OBJECT-TYPE + SYNTAX SEQUENCE OF AtmfM4VcUpcNpcCurrEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The ATM Forum M4 UPC/NPC Disagreement Monitoring Current + Data table for VCL termination points. + + This table maintains per-TP statistics for the + fifteen-minute interval currently being collected." + ::= { atmfM4MIBObjects 22 } + +atmfM4VcUpcNpcCurrEntry OBJECT-TYPE + SYNTAX AtmfM4VcUpcNpcCurrEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in the ATM Forum M4 UPC/NPC Disagreement + Monitoring Current Data table for VCL termination points. + + Each VCL Termination Point automatically has + an entry in this table associated with it." + INDEX { ifIndex, + atmVclVpi, + atmVclVci } + ::= { atmfM4VcUpcNpcCurrTable 1 } + +AtmfM4VcUpcNpcCurrEntry ::= SEQUENCE { + atmfM4VcUpcNpcCurrSuspect TruthValue, + atmfM4VcUpcNpcCurrElapsedTime TimeInterval, + atmfM4VcUpcNpcCurrSupprIntvls Counter32, + atmfM4VcUpcNpcCurrDiscardedCells Counter32, + atmfM4VcUpcNpcCurrDiscardedClp0 Counter32, + atmfM4VcUpcNpcCurrPassedCells Counter32, + atmfM4VcUpcNpcCurrPassedClp0 Counter32 + } + +atmfM4VcUpcNpcCurrSuspect OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "If true, the statistics in this entry may be unreliable." + ::= { atmfM4VcUpcNpcCurrEntry 1 } + +atmfM4VcUpcNpcCurrElapsedTime OBJECT-TYPE + SYNTAX TimeInterval + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Amount of time, measured in units of 0.01 second, that + statistics for this entry (the current interval) have been + counted." + ::= { atmfM4VcUpcNpcCurrEntry 2 } + +atmfM4VcUpcNpcCurrSupprIntvls OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This attribute is non-zero only if the ATM NE is + suppressing UPC/NPC Disagreement Monitoring History Data + entry creation when the current interval terminates with + 'all-zeroes' performance measurements." + ::= { atmfM4VcUpcNpcCurrEntry 3 } + +atmfM4VcUpcNpcCurrDiscardedCells OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of discarded cells due to combined CLP=0 and + CLP=1 UPC/NPC policing." + ::= { atmfM4VcUpcNpcCurrEntry 4 } + +atmfM4VcUpcNpcCurrDiscardedClp0 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of discarded cells due to CLP=0 only + UPC/NPC policing. + + This object shall be present only if CLP=0 traffic is + separately policed." + ::= { atmfM4VcUpcNpcCurrEntry 5 } + +atmfM4VcUpcNpcCurrPassedCells OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of cells that have been successfully passed by + the combined CLP=0 and CLP=1 UPC/NPC policing." + ::= { atmfM4VcUpcNpcCurrEntry 6 } + +atmfM4VcUpcNpcCurrPassedClp0 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of cells that have been successfully passed by + the CLP=0 UPC/NPC policing. + + This object shall be present only if CLP=0 traffic is + separately policed." + ::= { atmfM4VcUpcNpcCurrEntry 7 } + + +-- UPC/NPC Disagreement Monitoring History (per VCL termination +-- point and time interval) + +atmfM4VcUpcNpcHistTable OBJECT-TYPE + SYNTAX SEQUENCE OF AtmfM4VcUpcNpcHistEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The ATM Forum M4 UPC/NPC Disagreement Monitoring History + Data table for VCL termination points. + + This table maintains per-interface statistics for previous + fifteen-minute intervals." + ::= { atmfM4MIBObjects 23 } + +atmfM4VcUpcNpcHistEntry OBJECT-TYPE + SYNTAX AtmfM4VcUpcNpcHistEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in the ATM Forum M4 UPC/NPC Disagreement + Monitoring History Data table for VCL termination points. + + Each VCL Termination Point automatically has + an entry in this table associated with it." + INDEX { ifIndex, + atmVclVpi, + atmVclVci, + atmfM4VcUpcNpcHistIndex } + ::= { atmfM4VcUpcNpcHistTable 1 } + +AtmfM4VcUpcNpcHistEntry ::= SEQUENCE { + atmfM4VcUpcNpcHistIndex INTEGER, + atmfM4VcUpcNpcHistSuspect TruthValue, + atmfM4VcUpcNpcHistElapsedTime TimeInterval, + atmfM4VcUpcNpcHistSupprIntvls Unsigned32, + atmfM4VcUpcNpcHistDiscardedCells Unsigned32, + atmfM4VcUpcNpcHistDiscardedClp0 Unsigned32, + atmfM4VcUpcNpcHistPassedCells Unsigned32, + atmfM4VcUpcNpcHistPassedClp0 Unsigned32 + } + +atmfM4VcUpcNpcHistIndex OBJECT-TYPE + SYNTAX INTEGER (1..96) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A number between 1 and 96, which identifies the interval + for which the set of statistics in this entry was + collected. + + The interval identified by 1 is the most recently completed + 15 minute interval, and the interval identified by N is the + interval immediately preceding the one identified by N-1." + ::= { atmfM4VcUpcNpcHistEntry 1 } + +atmfM4VcUpcNpcHistSuspect OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "If true, the statistics in this entry may be unreliable." + ::= { atmfM4VcUpcNpcHistEntry 2 } + +atmfM4VcUpcNpcHistElapsedTime OBJECT-TYPE + SYNTAX TimeInterval + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Amount of time, measured in units of 0.01 second, that + statistics for this entry (the current interval) have been + counted." + ::= { atmfM4VcUpcNpcHistEntry 3 } + +atmfM4VcUpcNpcHistSupprIntvls OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This attribute is non-zero only if the ATM NE is + suppressing UPC/NPC Disagreement Monitoring History Data + entry creation when the current interval terminates with + 'all-zeroes' performance measurements." + ::= { atmfM4VcUpcNpcHistEntry 4 } + +atmfM4VcUpcNpcHistDiscardedCells OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of discarded cells due to combined CLP=0 and + CLP=1 UPC/NPC policing." + ::= { atmfM4VcUpcNpcHistEntry 5 } + +atmfM4VcUpcNpcHistDiscardedClp0 OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of discarded cells due to CLP=0 only + UPC/NPC policing. + + This object shall be present only if CLP=0 traffic is + separately policed." + ::= { atmfM4VcUpcNpcHistEntry 6 } + +atmfM4VcUpcNpcHistPassedCells OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of cells that have been successfully passed by + the combined CLP=0 and CLP=1 UPC/NPC policing." + ::= { atmfM4VcUpcNpcHistEntry 7 } + +atmfM4VcUpcNpcHistPassedClp0 OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of cells that have been successfully passed by + the CLP=0 UPC/NPC policing. + + This object shall be present only if CLP=0 traffic is + separately policed." + ::= { atmfM4VcUpcNpcHistEntry 8 } + + +-- ATM Forum M4 Test Types + +atmfM4TestTypes OBJECT IDENTIFIER + ::= { atmfM4MIBObjects 24 } + + +-- OAM Loopback Tests (VPL, VPC, VCL, anc VCC termination points): + +atmfM4TestOAMLoopbackSeg OBJECT-IDENTITY + STATUS current + DESCRIPTION + "This identifies an OAM Loopback Test on a VPL, VPC, + VCL, or VCC termination point, using a segment OAM + cell. + + The test type must have appended to it a code that uniquely + identifies an intermediate point responsible for looping + back the cell. If this is absent, the loopback is performed + at the end of the segment or connection. + + E.g., the OID { atmfM4TestOAMLoopbackSeg 5 } identifies + that the loopback should be performed at the intermediate + point labeled 5." + ::= { atmfM4TestTypes 1 } + +atmfM4TestOAMLoopbackE2E OBJECT-IDENTITY + STATUS current + DESCRIPTION + "This identifies an OAM Loopback Test on a VPL, VPC, + VCL, or VCC termination point, using an end-to-end OAM + cell." + ::= { atmfM4TestTypes 2 } + + +-- ATM Forum M4 VP Termination Point Test Table + +atmfM4VpTestTable OBJECT-TYPE + SYNTAX SEQUENCE OF AtmfM4VpTestEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The ATM Forum M4 VP Termination Point Test table. + This table allows tests to be run on VPL and VPC + termination points. + + The operation of this table is entirely analogous + to that of the ifTestTable in RFC 1573, except that + the indexes into this table are different." + ::= { atmfM4MIBObjects 25 } + +atmfM4VpTestEntry OBJECT-TYPE + SYNTAX AtmfM4VpTestEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing objects for invoking tests on a + VPL or VPC termination point." + INDEX { ifIndex, + atmVplVpi, + atmfM4VpTestObject } + ::= { atmfM4VpTestTable 1 } + +AtmfM4VpTestEntry ::= SEQUENCE { + atmfM4VpTestObject INTEGER, + atmfM4VpTestId TestAndIncr, + atmfM4VpTestStatus INTEGER, + atmfM4VpTestType AutonomousType, + atmfM4VpTestResult INTEGER, + atmfM4VpTestCode OBJECT IDENTIFIER, + atmfM4VpTestOwner OwnerString + } + +atmfM4VpTestObject OBJECT-TYPE + SYNTAX INTEGER { + vplTp(1), + vpcTp(2) + } + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Specifies whether the test applies to the VPL termination + point with the specified VPI, or the VPC termination point." + ::= { atmfM4VpTestEntry 1 } + +atmfM4VpTestId OBJECT-TYPE + SYNTAX TestAndIncr + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object identifies the current invocation of the + interface's test." + ::= { atmfM4VpTestEntry 2 } + +atmfM4VpTestStatus OBJECT-TYPE + SYNTAX INTEGER { notInUse(1), inUse(2) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object indicates whether or not some manager + currently has the necessary 'ownership' required to + invoke a test on this interface. A write to this + object is only successful when it changes its value + from 'notInUse(1)' to 'inUse(2)'. After completion of + a test, the agent resets the value back to + 'notInUse(1)'." + ::= { atmfM4VpTestEntry 3 } + +atmfM4VpTestType OBJECT-TYPE + SYNTAX AutonomousType + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A control variable used to start and stop operator- + initiated interface tests. Most OBJECT IDENTIFIER + values assigned to tests are defined elsewhere, in + association with specific types of interface. + However, this document assigns a value for a full- + duplex loopback test, and defines the special meanings + of the subject identifier: + + noTest OBJECT IDENTIFIER ::= { 0 0 } + + When the value noTest is written to this object, no + action is taken unless a test is in progress, in which + case the test is aborted. Writing any other value to + this object is only valid when no test is currently in + progress, in which case the indicated test is + initiated. + + When read, this object always returns the most recent + value that atmfM4VpTestType was set to. If it has not been + set since the last initialization of the network + management subsystem on the agent, a value of noTest + is returned." + ::= { atmfM4VpTestEntry 4 } + +atmfM4VpTestResult OBJECT-TYPE + SYNTAX INTEGER { + none(1), -- no test yet requested + success(2), + inProgress(3), + notSupported(4), + unAbleToRun(5), -- due to state of system + aborted(6), + failed(7) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object contains the result of the most recently + requested test, or the value none(1) if no tests have + been requested since the last reset. Note that this + facility provides no provision for saving the results + of one test when starting another, as could be + required if used by multiple managers concurrently." + ::= { atmfM4VpTestEntry 5 } + +atmfM4VpTestCode OBJECT-TYPE + SYNTAX OBJECT IDENTIFIER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object contains a code which contains more + specific information on the test result, for example + an error-code after a failed test. Error codes and + other values this object may take are specific to the + type of interface and/or test. The value may have the + semantics of either the AutonomousType or + RowPointer textual conventions as defined in RFC + 1903 [15]. The identifier: + + testCodeUnknown OBJECT IDENTIFIER ::= { 0 0 } + + is defined for use if no additional result code is + available." + ::= { atmfM4VpTestEntry 6 } + +atmfM4VpTestOwner OBJECT-TYPE + SYNTAX OwnerString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The entity which currently has the 'ownership' + required to invoke a test on this interface." + ::= { atmfM4VpTestEntry 7 } + + + +-- ATM Forum M4 VC Termination Point Test Table + +atmfM4VcTestTable OBJECT-TYPE + SYNTAX SEQUENCE OF AtmfM4VcTestEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The ATM Forum M4 VC Termination Point Test table. + This table allows tests to be run on VCL and VCC + termination points. + + The operation of this table is entirely analogous + to that of the ifTestTable in RFC 1573, except that + the indexes into this table are different." + ::= { atmfM4MIBObjects 26 } + +atmfM4VcTestEntry OBJECT-TYPE + SYNTAX AtmfM4VcTestEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing objects for invoking tests on a + VCL or VCC termination point." + INDEX { ifIndex, + atmVclVpi, + atmVclVci, + atmfM4VcTestObject } + ::= { atmfM4VcTestTable 1 } + +AtmfM4VcTestEntry ::= SEQUENCE { + atmfM4VcTestObject INTEGER, + atmfM4VcTestId TestAndIncr, + atmfM4VcTestStatus INTEGER, + atmfM4VcTestType AutonomousType, + atmfM4VcTestResult INTEGER, + atmfM4VcTestCode OBJECT IDENTIFIER, + atmfM4VcTestOwner OwnerString + } + +atmfM4VcTestObject OBJECT-TYPE + SYNTAX INTEGER { + vclTp(1), + vccTp(2) + } + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Specifies whether the test applies to the VCL termination + point with the specified VPI and VCI values, or to the VCC + termination point." + ::= { atmfM4VcTestEntry 1 } + +atmfM4VcTestId OBJECT-TYPE + SYNTAX TestAndIncr + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object identifies the current invocation of the + interface's test." + ::= { atmfM4VcTestEntry 2 } + +atmfM4VcTestStatus OBJECT-TYPE + SYNTAX INTEGER { notInUse(1), inUse(2) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object indicates whether or not some manager + currently has the necessary 'ownership' required to + invoke a test on this interface. A write to this + object is only successful when it changes its value + from 'notInUse(1)' to 'inUse(2)'. After completion of + a test, the agent resets the value back to + 'notInUse(1)'." + ::= { atmfM4VcTestEntry 3 } + +atmfM4VcTestType OBJECT-TYPE + SYNTAX AutonomousType + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A control variable used to start and stop operator- + initiated interface tests. Most OBJECT IDENTIFIER + values assigned to tests are defined elsewhere, in + association with specific types of interface. + However, this document assigns a value for a full- + duplex loopback test, and defines the special meanings + of the subject identifier: + + noTest OBJECT IDENTIFIER ::= { 0 0 } + + When the value noTest is written to this object, no + action is taken unless a test is in progress, in which + case the test is aborted. Writing any other value to + this object is only valid when no test is currently in + progress, in which case the indicated test is + initiated. + + When read, this object always returns the most recent + value that atmfM4VcTestType was set to. If it has not been + set since the last initialization of the network + management subsystem on the agent, a value of noTest + is returned." + ::= { atmfM4VcTestEntry 4 } + +atmfM4VcTestResult OBJECT-TYPE + SYNTAX INTEGER { + none(1), -- no test yet requested + success(2), + inProgress(3), + notSupported(4), + unAbleToRun(5), -- due to state of system + aborted(6), + failed(7) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object contains the result of the most recently + requested test, or the value none(1) if no tests have + been requested since the last reset. Note that this + facility provides no provision for saving the results + of one test when starting another, as could be + required if used by multiple managers concurrently." + ::= { atmfM4VcTestEntry 5 } + +atmfM4VcTestCode OBJECT-TYPE + SYNTAX OBJECT IDENTIFIER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object contains a code which contains more + specific information on the test result, for example + an error-code after a failed test. Error codes and + other values this object may take are specific to the + type of interface and/or test. The value may have the + semantics of either the AutonomousType or + RowPointer textual conventions as defined in RFC + 1903 [15]. The identifier: + + testCodeUnknown OBJECT IDENTIFIER ::= { 0 0 } + + is defined for use if no additional result code is + available." + ::= { atmfM4VcTestEntry 6 } + +atmfM4VcTestOwner OBJECT-TYPE + SYNTAX OwnerString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The entity which currently has the 'ownership' + required to invoke a test on this termination point." + ::= { atmfM4VcTestEntry 7 } + + +-- ATM Forum M4 Equipment Table + +atmfM4EquipTable OBJECT-TYPE + SYNTAX SEQUENCE OF AtmfM4EquipEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The ATM Forum M4 Equipment table. This table augments the + physical entity table." + ::= { atmfM4MIBObjects 28 } + +atmfM4EquipEntry OBJECT-TYPE + SYNTAX AtmfM4EquipEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in the ATM Forum M4 Equipment table. Each entry + of this type represents a piece of equipment within the ATM + NE that neither is nor accepts a replaceable plug- in unit." + INDEX { entPhysicalIndex } + ::= { atmfM4EquipTable 1 } + +AtmfM4EquipEntry ::= SEQUENCE { + atmfM4EquipAdminStatus INTEGER, + atmfM4EquipLocation DisplayString, + atmfM4EquipOperStatus INTEGER, + atmfM4EquipVendor DisplayString, + atmfM4EquipVersion AutonomousType, + atmfM4EquipUserLabel DisplayString, + atmfM4EquipAlarmSeverityIndex Integer32 + } + +atmfM4EquipAdminStatus OBJECT-TYPE + SYNTAX INTEGER { + up(1), + down(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Used by the adminstrator to lock and unlock the object." + ::= { atmfM4EquipEntry 1 } + +atmfM4EquipLocation OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The specific or general location of the component." + ::= { atmfM4EquipEntry 2 } + +atmfM4EquipOperStatus OBJECT-TYPE + SYNTAX INTEGER { + up(1), + down(2), + unknown(3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This attributes identifies whether or not the component is + capable of performing its normal functions." + ::= { atmfM4EquipEntry 3 } + +atmfM4EquipVendor OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The vendor of the component." + ::= { atmfM4EquipEntry 4 } + +atmfM4EquipVersion OBJECT-TYPE + SYNTAX AutonomousType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The version of the component." + ::= { atmfM4EquipEntry 5 } + +atmfM4EquipUserLabel OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A user-friendly name for the piece of equipment." + DEFVAL { "" } + ::= { atmfM4EquipEntry 6 } + +atmfM4EquipAlarmSeverityIndex OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "An index into the alarm severity profile table, specifying + the severity assignments for M4 alarms reported for this + component." + DEFVAL { 0 } + ::= { atmfM4EquipEntry 7 } + + +-- ATM Forum M4 Equipment Holder Table + +atmfM4EquipHolderTable OBJECT-TYPE + SYNTAX SEQUENCE OF AtmfM4EquipHolderEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The ATM Forum M4 Equipment Holder table. This table + augments the physical table." + ::= { atmfM4MIBObjects 29 } + +atmfM4EquipHolderEntry OBJECT-TYPE + SYNTAX AtmfM4EquipHolderEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in the ATM Forum M4 Equipment Holder table. Each + entry of this type represents a component within the ATM NE + that accepts a replaceable plug-in unit." + INDEX { entPhysicalIndex } + ::= { atmfM4EquipHolderTable 1 } + +AtmfM4EquipHolderEntry ::= SEQUENCE { + atmfM4EquipHolderType INTEGER, + atmfM4EquipHolderAcceptableTypes DisplayString, + atmfM4EquipHolderSlotStatus INTEGER, + atmfM4EquipHolderSwLoad INTEGER + } + +atmfM4EquipHolderType OBJECT-TYPE + SYNTAX INTEGER { + rack(1), + shelf(2), + drawer(3), + slot(4) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The type of the component." + ::= { atmfM4EquipHolderEntry 1 } + +atmfM4EquipHolderAcceptableTypes OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The types of plug-in units that can be supported by the + slot, separated by newline characters. + + This attribute shall be present only when the Equipment + Holder represents a slot." + ::= { atmfM4EquipHolderEntry 2 } + +atmfM4EquipHolderSlotStatus OBJECT-TYPE + SYNTAX INTEGER { + empty(1), + full(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This attributes identifies whether or not a plug-in unit is + present in the slot. + + This attribute shall be present only when the Equipment + Holder represents a slot." + ::= { atmfM4EquipHolderEntry 3 } + +atmfM4EquipHolderSwLoad OBJECT-TYPE + SYNTAX INTEGER (1..2147483647) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "An index into the installed software table, specifying + the software that is to be loaded into the plug-in unit + whenever an automatic reload of software is needed. + + This attribute shall be present only when the Equipment + Holder represents a slot." + ::= { atmfM4EquipHolderEntry 4 } + + +-- ATM Forum M4 Plug-In Unit Table + +atmfM4PlugInUnitTable OBJECT-TYPE + SYNTAX SEQUENCE OF AtmfM4PlugInUnitEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The ATM Forum M4 Plug-In Unittable. This table augments + the physical entity table." + ::= { atmfM4MIBObjects 30 } + +atmfM4PlugInUnitEntry OBJECT-TYPE + SYNTAX AtmfM4PlugInUnitEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in the ATM Forum M4 Plug-In Unit table. Each + entry of this type represents a piece of equipment within + the ATM NE that is inserted into and removed from an + Equipment Holder." + INDEX { entPhysicalIndex } + ::= { atmfM4PlugInUnitTable 1 } + +AtmfM4PlugInUnitEntry ::= SEQUENCE { + atmfM4PlugInUnitAdminStatus INTEGER, + atmfM4PlugInUnitAvailStatus INTEGER, + atmfM4PlugInUnitOperStatus INTEGER, + atmfM4PlugInUnitVendor DisplayString, + atmfM4PlugInUnitVersion AutonomousType, + atmfM4PlugInUnitAlarmSeverityIndex Integer32 + } + +atmfM4PlugInUnitAdminStatus OBJECT-TYPE + SYNTAX INTEGER { + up(1), + down(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Used by the adminstrator to lock and unlock the object." + ::= { atmfM4PlugInUnitEntry 1 } + +atmfM4PlugInUnitAvailStatus OBJECT-TYPE + SYNTAX INTEGER { + available(1), + inTest(2), + failed(3), + powerOff(4), + notInstalled(5), + offLine(6), + dependency(7) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Provides further information regarding the state of the + component." + ::= { atmfM4PlugInUnitEntry 2 } + +atmfM4PlugInUnitOperStatus OBJECT-TYPE + SYNTAX INTEGER { + up(1), + down(2), + unknown(3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This attributes identifies whether or not the component is + capable of performing its normal functions." + ::= { atmfM4PlugInUnitEntry 3 } + +atmfM4PlugInUnitVendor OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The vendor of the component." + ::= { atmfM4PlugInUnitEntry 4 } + +atmfM4PlugInUnitVersion OBJECT-TYPE + SYNTAX AutonomousType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The version of the component." + ::= { atmfM4PlugInUnitEntry 5 } + +atmfM4PlugInUnitAlarmSeverityIndex OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "An index into the alarm severity profile table, specifying + the severity assignments for M4 alarms reported for this + component." + DEFVAL { 0 } + ::= { atmfM4PlugInUnitEntry 6 } + +-- ATM Forum M4 Hardware Unit/Running Software Relationship Table + +atmfM4HwRunningSwTable OBJECT-TYPE + SYNTAX SEQUENCE OF AtmfM4HwRunningSwEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The ATM Forum M4 Hardware Unit/Running Software + relationship. This table describes the software that is + running on each hardware unit in the ATM NE." + ::= { atmfM4MIBObjects 32 } + +atmfM4HwRunningSwEntry OBJECT-TYPE + SYNTAX AtmfM4HwRunningSwEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in the ATM Forum M4 Hardware Unit/Running Software + relationship table. Each entry of this type identifies an + entry in the entPhysicalTable and one in the + hrRunningSoftwareTable." + INDEX { atmfM4HwRunningSwHwIndex, + atmfM4HwRunningSwIndex } + ::= { atmfM4HwRunningSwTable 1 } + +AtmfM4HwRunningSwEntry ::= SEQUENCE { + atmfM4HwRunningSwHwIndex INTEGER, + atmfM4HwRunningSwIndex INTEGER, + atmfM4HwRunningSwSwIndex INTEGER + } + +atmfM4HwRunningSwHwIndex OBJECT-TYPE + SYNTAX INTEGER (1..2147483647) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The index, in the entPhysicalTable, of the containing + hardware unit in this pair." + ::= { atmfM4HwRunningSwEntry 1 } + +atmfM4HwRunningSwIndex OBJECT-TYPE + SYNTAX INTEGER (1..2147483647) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A unique number within the context of the containing + hardware unit." + ::= { atmfM4HwRunningSwEntry 2 } + +atmfM4HwRunningSwSwIndex OBJECT-TYPE + SYNTAX INTEGER (1..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The index, in the hrRunningSwTable, of the software product + represented by this entry." + ::= { atmfM4HwRunningSwEntry 3 } + + +-- ATM Forum M4 Hardware Unit/Installed Software Relationship Table + +atmfM4HwInstalledSwTable OBJECT-TYPE + SYNTAX SEQUENCE OF AtmfM4HwInstalledSwEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The ATM Forum M4 Hardware Unit/Installed Software + relationship. This table describes the software that is + Installed on each hardware unit in the ATM NE." + ::= { atmfM4MIBObjects 33 } + +atmfM4HwInstalledSwEntry OBJECT-TYPE + SYNTAX AtmfM4HwInstalledSwEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in the ATM Forum M4 Hardware Unit/Installed + Software relationship table. Each entry of this type + identifies an entry in the physical entity table and one in the + hrInstalledSoftwareTable." + INDEX { atmfM4HwInstalledSwHwIndex, + atmfM4HwInstalledSwIndex } + ::= { atmfM4HwInstalledSwTable 1 } + +AtmfM4HwInstalledSwEntry ::= SEQUENCE { + atmfM4HwInstalledSwHwIndex INTEGER, + atmfM4HwInstalledSwIndex INTEGER, + atmfM4HwInstalledSwSwIndex INTEGER, + atmfM4HwSwAlarmSeverityIndex Integer32 + } + +atmfM4HwInstalledSwHwIndex OBJECT-TYPE + SYNTAX INTEGER (1..2147483647) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The index, in the entPhysical table, of the containing + physical entity in this pair." + ::= { atmfM4HwInstalledSwEntry 1 } + +atmfM4HwInstalledSwIndex OBJECT-TYPE + SYNTAX INTEGER (1..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A unique number within the context of the containing + hardware unit." + ::= { atmfM4HwInstalledSwEntry 2 } + +atmfM4HwInstalledSwSwIndex OBJECT-TYPE + SYNTAX INTEGER (1..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The index, in the hrInstalledSwTable, of the software + product represented by this entry." + ::= { atmfM4HwInstalledSwEntry 3 } + +atmfM4HwSwAlarmSeverityIndex OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "An index into the alarm severity profile table, specifying + the severity assignments for M4 alarms reported for this + piece of software installed on the hardware unit." + DEFVAL { 0 } + ::= { atmfM4HwInstalledSwEntry 4 } + + + +-- ATM Forum M4 Alarm Severity Identifier Textual Convention + +AtmfM4AlarmLogSeverity ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The value of this object identifies the severity of + an alarm in the log, including 'cleared'." + SYNTAX INTEGER { + cleared(-1), + indeterminate(0), + critical(1), + major(2), + minor(3), + warning(4) + } + +AtmfM4AlarmSeverity ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The value of this object identifies the severity of + an alarm that has occurred. (Note that there is no + value corresponding to 'cleared'.)" + SYNTAX INTEGER { + indeterminate(0), + critical(1), + major(2), + minor(3), + warning(4) + } + +-- ATM Forum M4 Alarm Severity Profile Table + +atmfM4AlarmSevDefault OBJECT-TYPE + SYNTAX AtmfM4AlarmSeverity + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The default severity value used for new profile + index/trap ID pairs that have not yet been modified. + This value is also used whenever an object's alarm + severity profile index is set to 0." + DEFVAL { minor } + ::= { atmfM4MIBObjects 34 } + +atmfM4AlarmSevProfileIndexNext OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object contains an appropriate value to be used for + atmfM4AlarmSevProfileIndex when creating entries in the + atmfM4AlarmSevProfileTable. + The value -1 indicates that no unassigned entries are + available. + To obtain the index value for a new entry, the manager + issues a management protocol retrieval operation to obtain + the current value of this object. After each retrieval, the + agent should modify the value to the next unassigned index + (or -1)." + ::= { atmfM4MIBObjects 35 } + +atmfM4AlarmSevProfileTable OBJECT-TYPE + SYNTAX SEQUENCE OF AtmfM4AlarmSevProfileEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The ATM Forum M4 alarm severity profile table. + This table specifies which profiles exist. Creating + or deleting an entry in this table automatically + creates or deletes the corresponding entries in the + atmfM4AlarmSeverityTable." + ::= { atmfM4MIBObjects 36 } + +atmfM4AlarmSevProfileEntry OBJECT-TYPE + SYNTAX AtmfM4AlarmSevProfileEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A group of severities, one for each alarm type in + the communications alarm group." + INDEX { atmfM4AlarmSevProfileIndex } + ::= { atmfM4AlarmSevProfileTable 1 } + +AtmfM4AlarmSevProfileEntry ::= SEQUENCE { + atmfM4AlarmSevProfileIndex Integer32, + atmfM4AlarmSevProfileRowStatus RowStatus + } + +atmfM4AlarmSevProfileIndex OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A number identifying this alarm severity profile." + ::= { atmfM4AlarmSevProfileEntry 1 } + +atmfM4AlarmSevProfileRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object is used to create a new row or to delete + an existing row in the table." + ::= { atmfM4AlarmSevProfileEntry 2 } + + +-- ATM Forum M4 Alarm Severity Table + +atmfM4AlarmSevTable OBJECT-TYPE + SYNTAX SEQUENCE OF AtmfM4AlarmSevEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The ATM Forum M4 alarm severity table. + This table associates profile index and trap + ID pairs with severities to be used for + M4 alarm traps that have occurred. + (Note that this table does not apply to cleared alarms.)" + ::= { atmfM4MIBObjects 37 } + +atmfM4AlarmSevEntry OBJECT-TYPE + SYNTAX AtmfM4AlarmSevEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in this table associates an alarm severity + profile index/trap ID pair with a severity. + Deleting a particular profile's row in the alarm severity + profile table deletes all rows in this table with the + same profile index. + Conceptually, rows corresponding to all possible trap ID's + are created in this table when a new alarm severity profile + is created, but the agent will return a default value + except for those few traps for which values have been set." + INDEX { atmfM4AlarmSevProfileIndex, + atmfM4AlarmSevTrapId } + ::= { atmfM4AlarmSevTable 1 } + +AtmfM4AlarmSevEntry ::= SEQUENCE { + atmfM4AlarmSevTrapId Integer32, + atmfM4AlarmSeverity AtmfM4AlarmSeverity + } + +atmfM4AlarmSevTrapId OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The ID of the trap type to which this entry applies." + ::= { atmfM4AlarmSevEntry 1 } + +atmfM4AlarmSeverity OBJECT-TYPE + SYNTAX AtmfM4AlarmSeverity + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The severity to be used for this trap type when the + is selected. + If no value for this object has ever been set since + the corresponding profile was created, the agent should + return the value of the object atmfM4AlarmSevDefault" + ::= { atmfM4AlarmSevEntry 2 } + + +-- ATM Forum M4 Alarm Forwarding Discriminator Table + +atmfM4ForwardAllTraps OBJECT-IDENTITY + STATUS current + DESCRIPTION + "This is used as the value of the object + atmfM4ForwardedTrapObject when traps from all objects + are to be forwarded, or when there is only one + object of the type that forwards the specified + trap type." + ::= { atmfM4MIBObjects 38 } + + +atmfM4TrapForwardingTable OBJECT-TYPE + SYNTAX SEQUENCE OF AtmfM4TrapForwardingEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The ATM Forum M4 Trap forwarding discriminator + table. + This table specifies which traps will be sent to + which management system." + ::= { atmfM4MIBObjects 39 } + +atmfM4TrapForwardingEntry OBJECT-TYPE + SYNTAX AtmfM4TrapForwardingEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Information about a group of traps to be sent to + a particular IP address. + + A new entry must have values for all attributes that + do not have default values before its RowStatus column + can be set to active(1)." + INDEX { atmfM4TrapForwardingIndex } + ::= { atmfM4TrapForwardingTable 1 } + +AtmfM4TrapForwardingEntry ::= SEQUENCE { + atmfM4TrapForwardingIndex Integer32, + atmfM4TrapForwardingDest IpAddress, + atmfM4ForwardedTrapId Integer32, + atmfM4ForwardedTrapObject RowPointer, + atmfM4TrapForwardingPort Integer32, + atmfM4LowestForwardedSeverity AtmfM4AlarmSeverity, + atmfM4ForwardedIndeterminate TruthValue, + atmfM4TrapForwardingRowStatus RowStatus + } + +atmfM4TrapForwardingIndex OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A unique number identifying the table entry." + ::= { atmfM4TrapForwardingEntry 1 } + +atmfM4TrapForwardingDest OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The IP address to which traps identified by this + table entry should be sent." + ::= { atmfM4TrapForwardingEntry 2 } + +atmfM4ForwardedTrapId OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The ID of the trap type to which this entry applies." + ::= { atmfM4TrapForwardingEntry 3 } + +atmfM4ForwardedTrapObject OBJECT-TYPE + SYNTAX RowPointer + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The object to which this entry applies. + By convention, this is the name of the first object in + the row in the table referenced. + + The special value { 0 0 } indicates that + traps of this type from all objects of the type that can + generate it. It should also be used when traps from the + ATM NE are to be specified." + ::= { atmfM4TrapForwardingEntry 4 } + +atmfM4TrapForwardingPort OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The UDP port on the specified management system to + which traps identified by this entry should be sent." + DEFVAL { 161 } + ::= { atmfM4TrapForwardingEntry 5 } + +atmfM4LowestForwardedSeverity OBJECT-TYPE + SYNTAX AtmfM4AlarmSeverity + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The lowest severity of traps of this type from + the specified object that should be sent to this + address. + This object has significance only if the trap type + specified has a severity associated with it" + DEFVAL { minor } + ::= { atmfM4TrapForwardingEntry 6 } + +atmfM4ForwardedIndeterminate OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "When this object has the value TRUE, traps with + indeterminate severity will be forwarded to the + specified event. + This object has significance only if the trap type + specified has a severity associated with it" + DEFVAL { false } + ::= { atmfM4TrapForwardingEntry 7 } + +atmfM4TrapForwardingRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object is used to create a new row or to delete + an existing row in the table." + ::= { atmfM4TrapForwardingEntry 8 } + + +-- ATM Forum M4 Trap Agent MIB Log Table + +atmfM4TrapLogTable OBJECT-TYPE + SYNTAX SEQUENCE OF AtmfM4TrapLogEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The ATM Forum M4 Trap Agent log table. + This table defines the trap logs currently maintained + by the agent. + The management system creates entries in this table to + specify which types of traps, from which ATM network + elements, should be logged. + Deleting an entry in this table deletes all entries in + the corresponding log." + ::= { atmfM4MIBObjects 40 } + +atmfM4TrapLogEntry OBJECT-TYPE + SYNTAX AtmfM4TrapLogEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Information about a single trap log." + INDEX { atmfM4TrapLogSrc, + atmfM4TrapLogType } + ::= { atmfM4TrapLogTable 1 } + +AtmfM4TrapLogEntry ::= SEQUENCE { + atmfM4TrapLogSrc IpAddress, + atmfM4TrapLogType INTEGER, + atmfM4TrapLogAdminStatus INTEGER, + atmfM4TrapLogOperStatus INTEGER, + atmfM4TrapLogFullAction INTEGER, + atmfM4TrapLogRowStatus RowStatus + } + +atmfM4TrapLogSrc OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The IP address of the SNMP agent whose traps are + stored in this log." + ::= { atmfM4TrapLogEntry 1 } + +atmfM4TrapLogType OBJECT-TYPE + SYNTAX INTEGER { + objectCreated(1), + objectDeleted(2), + configChange(3), + stateChange(4), + alarm(5) + } + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The type of traps stored in this log." + ::= { atmfM4TrapLogEntry 2 } + +atmfM4TrapLogAdminStatus OBJECT-TYPE + SYNTAX INTEGER { + up(1), + down(2) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The management system uses this object to stop and + start the operations of this object." + DEFVAL { up } + ::= { atmfM4TrapLogEntry 3 } + +atmfM4TrapLogOperStatus OBJECT-TYPE + SYNTAX INTEGER { + up(1), + down(2), + logFull(3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates whether or not the log is capable of + performing its normal operations." + DEFVAL { up } + ::= { atmfM4TrapLogEntry 4 } + +atmfM4TrapLogFullAction OBJECT-TYPE + SYNTAX INTEGER { + halt(1), + wrap(2) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Indicates the action that should be performed when no + more log entries can be created due to a log-full + condition. If the value of this object is wrap(2), + each new log entry will cause the deletion of the oldest + entry still in the log, for as long as the log is still + full." + DEFVAL { wrap } + ::= { atmfM4TrapLogEntry 5 } + +atmfM4TrapLogRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object is used to create a new row or to delete + an existing row in the table." + ::= { atmfM4TrapLogEntry 6 } + + +-- ATM Forum M4 Trap Agent MIB Logged Trap Table + +atmfM4LoggedTrapTable OBJECT-TYPE + SYNTAX SEQUENCE OF AtmfM4LoggedTrapEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The ATM Forum M4 Trap Agent logged trap table. + This table is used to maintain the traps logged." + ::= { atmfM4MIBObjects 41 } + +atmfM4LoggedTrapEntry OBJECT-TYPE + SYNTAX AtmfM4LoggedTrapEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Information about a single trap in the log. + Entries in this table are created automatically but + can be deleted by the management system. + Entries that represent 'alarm' log types are augmented + by the atmfM4LoggedAlarmEntry table." + INDEX { atmfM4TrapLogSrc, + atmfM4TrapLogType, + atmfM4LoggedTrapIndex } + ::= { atmfM4LoggedTrapTable 1 } + +AtmfM4LoggedTrapEntry ::= SEQUENCE { + atmfM4LoggedTrapIndex Unsigned32, + atmfM4LoggedTrapTime DateAndTime, + atmfM4LoggedTrapID Integer32, + atmfM4LoggedTrapObject RowPointer, + atmfM4LoggedTrapRowStatus RowStatus + } + +atmfM4LoggedTrapIndex OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A unique number identifying this entry in the log. + When the maximum value for this object has been reached, + it will wrap around to 0." + ::= { atmfM4LoggedTrapEntry 1 } + +atmfM4LoggedTrapTime OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The time at which this trap was logged." + ::= { atmfM4LoggedTrapEntry 2 } + +atmfM4LoggedTrapID OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The type of trap to which this entry applies. + Together with the logged trap ID object, this object + specifies the entity to which this logged trap referred." + ::= { atmfM4LoggedTrapEntry 3 } + +atmfM4LoggedTrapObject OBJECT-TYPE + SYNTAX RowPointer + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The object to which this entry applies. + By convention, this is the name of the first object in + the row in the table referenced. + Together with the logged trap ID object, this object + specifies the entity to which this logged trap referred. + + The special value { 0 0 } indicates that the trap refers + to the ATM NE entity itself." + ::= { atmfM4LoggedTrapEntry 4 } + +atmfM4LoggedTrapRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object is used to delete an existing row in the + table. Note that the only value to which a management + system can set this object is destroy(6)." + ::= { atmfM4LoggedTrapEntry 5 } + + +-- ATM Forum M4 Trap Agent MIB Logged Alarm Table + +atmfM4LoggedAlarmTable OBJECT-TYPE + SYNTAX SEQUENCE OF AtmfM4LoggedAlarmEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The ATM Forum M4 Trap Agent logged alarm trap table. + This table is used to maintain extra information for + logged traps that represent alarm types." + ::= { atmfM4MIBObjects 42 } + +atmfM4LoggedAlarmEntry OBJECT-TYPE + SYNTAX AtmfM4LoggedAlarmEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Information about the alarm-specific attributes of + a single trap in the log." + INDEX { atmfM4TrapLogSrc, + atmfM4TrapLogType, + atmfM4LoggedTrapIndex } + ::= { atmfM4LoggedAlarmTable 1 } + +AtmfM4LoggedAlarmEntry ::= SEQUENCE { + atmfM4LoggedAlarmSeverity AtmfM4AlarmLogSeverity, + atmfM4LoggedAlarmBackedUp TruthValue, + atmfM4LoggedAlarmBUObject RowPointer, + atmfM4LoggedAlarmSpecificProb DisplayString, + atmfM4LoggedAlarmRepairAct DisplayString + } + +atmfM4LoggedAlarmSeverity OBJECT-TYPE + SYNTAX AtmfM4AlarmLogSeverity + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The perceived severity of the alarm, as specified by + the agent that generated it." + ::= { atmfM4LoggedAlarmEntry 1 } + +atmfM4LoggedAlarmBackedUp OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "If the value of this object is true, the agent reported + in this trap that the failed object had been backed up. + + This object is only present if it was included in the + alarm trap corresponding to this log entry." + ::= { atmfM4LoggedAlarmEntry 2 } + +atmfM4LoggedAlarmBUObject OBJECT-TYPE + SYNTAX RowPointer + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the object that provided back-up services to + the failed object. + + This object is only present if it was included in the + alarm trap corresponding to this log entry." + ::= { atmfM4LoggedAlarmEntry 3 } + +atmfM4LoggedAlarmSpecificProb OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates further refinements to the problem identified + by the alarm type. If more than one specific problem + is described in this object, the problem descriptions are + separated by newline characters. + + This object is only present if it was included in the + alarm trap corresponding to this log entry." + ::= { atmfM4LoggedAlarmEntry 4 } + +atmfM4LoggedAlarmRepairAct OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates proposed repair actions reported by the agent + for the the problem identified by the alarm. If more than + one action is described in this object, the problem + descriptions are separated by newline characters. + + This object is only present if it was included in the + alarm trap corresponding to this log entry." + ::= { atmfM4LoggedAlarmEntry 5 } + + +-- ATM M4 MIB Notification types + +-- Auxiliary definitions for alarms + +-- Except for perceived severity, the following objects may be +-- optionally appended to any alarm notification. + +atmfM4TrapAlarmSeverity OBJECT-TYPE + SYNTAX AtmfM4AlarmLogSeverity + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The perceived severity of the alarm, as specified by + the agent that generated it." + ::= { atmfM4MIBObjects 43 } + +atmfM4TrapAlarmBackedUp OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "If the value of this object is true, the failed object + has been backed up." + ::= { atmfM4MIBObjects 44 } + +atmfM4TrapAlarmBUObject OBJECT-TYPE + SYNTAX RowPointer + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "Indicates the object that provided back-up services to + the failed object." + ::= { atmfM4MIBObjects 45 } + +atmfM4TrapAlarmSpecificProb OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "Indicates further refinements to the problem identified + by the alarm type. If more than one specific problem + is described in this object, the problem descriptions are + separated by newline characters." + ::= { atmfM4MIBObjects 46 } + +atmfM4TrapAlarmRepairAct OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "Indicates proposed repair actions reported by the agent + for the the problem identified by the alarm. If more than + one action is described in this object, the problem + descriptions are separated by newline characters." + ::= { atmfM4MIBObjects 47 } + + +-- Comunications Alarms (interface) + +atmfM4IfAisAlarm NOTIFICATION-TYPE + OBJECTS { ifIndex, atmfM4TrapAlarmSeverity } + STATUS current + DESCRIPTION + "Indicates that an AIS alarm condition has occurred + on the physical path TP associated with the specified + interface." + ::= { atmfM4MIBTraps 1 } + +atmfM4IfLcdAlarm NOTIFICATION-TYPE + OBJECTS { ifIndex, atmfM4TrapAlarmSeverity } + STATUS current + DESCRIPTION + "Indicates that an LCD (Loss of Cell Delineation) + condition has occurred on the TC Adatpr associated + with the specified interface." + ::= { atmfM4MIBTraps 2 } + +atmfM4IfLofAlarm NOTIFICATION-TYPE + OBJECTS { ifIndex, atmfM4TrapAlarmSeverity } + STATUS current + DESCRIPTION + "Indicates that an LOF (Loss of Frame) + condition has occurred on the physical path TP associated + with the specified interface." + ::= { atmfM4MIBTraps 3 } + +atmfM4IfLopAlarm NOTIFICATION-TYPE + OBJECTS { ifIndex, atmfM4TrapAlarmSeverity } + STATUS current + DESCRIPTION + "Indicates that an LOP (Loss of Pointer) + condition has occurred on the physical path TP associated + with the specified interface." + ::= { atmfM4MIBTraps 4 } + +atmfM4IfLosAlarm NOTIFICATION-TYPE + OBJECTS { ifIndex, atmfM4TrapAlarmSeverity } + STATUS current + DESCRIPTION + "Indicates that an LOS (Loss of Signal) + condition has occurred on the physical path TP associated + with the specified interface." + ::= { atmfM4MIBTraps 5 } + +atmfM4IfPayloadMismatchAlarm NOTIFICATION-TYPE + OBJECTS { ifIndex, atmfM4TrapAlarmSeverity } + STATUS current + DESCRIPTION + "Indicates that a payload type mismatch condition has + occurred + on the physical path TP associated with the specified + interface." + ::= { atmfM4MIBTraps 6 } + +atmfM4IfXmissionErrAlarm NOTIFICATION-TYPE + OBJECTS { ifIndex, atmfM4TrapAlarmSeverity } + STATUS current + DESCRIPTION + "Indicates that an transmission error condition has occurred + on the physical path TP associated with the specified + interface." + ::= { atmfM4MIBTraps 7 } + +atmfM4IfPathTraceMismatchAlarm NOTIFICATION-TYPE + OBJECTS { ifIndex, atmfM4TrapAlarmSeverity } + STATUS current + DESCRIPTION + "Indicates that path trace mismatch condition has occurred + on the physical path TP associated with the specified + interface." + ::= { atmfM4MIBTraps 8 } + +atmfM4IfRdiAlarm NOTIFICATION-TYPE + OBJECTS { ifIndex, atmfM4TrapAlarmSeverity } + STATUS current + DESCRIPTION + "Indicates that an RDI (Remote Defect Indication) + condition has occurred on the physical path TP associated + with the specified interface." + ::= { atmfM4MIBTraps 9 } + +atmfM4IfSignalLabelMismatchAlarm NOTIFICATION-TYPE + OBJECTS { ifIndex, atmfM4TrapAlarmSeverity } + STATUS current + DESCRIPTION + "Indicates that a signal label mismatch has occurred + on the physical path TP associated with the specified + interface." + ::= { atmfM4MIBTraps 10 } + + +--Start of commenting out to get MIB to compile (fah@salix.com) +-- Communications alarms (VPL termination point) +-- +--atmfM4VplTpAisAlarm NOTIFICATION-TYPE +-- OBJECTS { ifIndex, atmVplVpi, atmfM4TrapAlarmSeverity } +-- STATUS current +-- DESCRIPTION +-- "Indicates that an AIS alarm condition has occurred +-- on the VPL TP associated with the specified +-- interface and VPI." +-- ::= { atmfM4MIBTraps 11 } +-- +--atmfM4VplTpRdiAlarm NOTIFICATION-TYPE +-- OBJECTS { ifIndex, atmVplVpi, atmfM4TrapAlarmSeverity } +-- STATUS current +-- DESCRIPTION +-- "Indicates that an RDI (Remote Defect Indication) +-- condition has occurred on the VPL TP associated +-- with the specified interface." +-- ::= { atmfM4MIBTraps 12 } +-- +-- +-- Communications alarms (VPC termination point) +-- +--atmfM4VpcTpAisAlarm NOTIFICATION-TYPE +-- OBJECTS { ifIndex, atmVplVpi, atmfM4TrapAlarmSeverity } +-- STATUS current +-- DESCRIPTION +-- "Indicates that an AIS alarm condition has occurred +-- on the VPC TP associated with the specified +-- interface and VPI." +-- ::= { atmfM4MIBTraps 13 } +-- +--atmfM4VpcTpRdiAlarm NOTIFICATION-TYPE +-- OBJECTS { ifIndex, atmVplVpi, atmfM4TrapAlarmSeverity } +-- STATUS current +-- DESCRIPTION +-- "Indicates that an RDI (Remote Defect Indication) +-- condition has occurred on the VPC TP associated +-- with the specified interface." +-- ::= { atmfM4MIBTraps 14 } +-- +-- +-- Communications alarms (VCL termination point) +-- +--atmfM4VclTpAisAlarm NOTIFICATION-TYPE +-- OBJECTS { ifIndex, atmVclVpi, atmVclVci, +-- atmfM4TrapAlarmSeverity } +-- STATUS current +-- DESCRIPTION +-- "Indicates that an AIS alarm condition has occurred +-- on the VCL TP associated with the specified +-- interface and VCI." +-- ::= { atmfM4MIBTraps 15 } +-- +--atmfM4VclTpRdiAlarm NOTIFICATION-TYPE +-- OBJECTS { ifIndex, atmVclVpi, atmVclVci, +-- atmfM4TrapAlarmSeverity } +-- STATUS current +-- DESCRIPTION +-- "Indicates that an RDI (Remote Defect Indication) +-- condition has occurred on the VCL TP associated +-- with the specified interface." +-- ::= { atmfM4MIBTraps 16 } +-- +-- +-- Communications alarms (VCC termination point) +-- +--atmfM4VccTpAisAlarm NOTIFICATION-TYPE +-- OBJECTS { ifIndex, atmVclVpi, atmVclVci, +-- atmfM4TrapAlarmSeverity } +-- STATUS current +-- DESCRIPTION +-- "Indicates that an AIS alarm condition has occurred +-- on the VCC TP associated with the specified +-- interface and VCI." +-- ::= { atmfM4MIBTraps 17 } +-- +--atmfM4VccTpRdiAlarm NOTIFICATION-TYPE +-- OBJECTS { ifIndex, atmVclVpi, atmVclVci, +-- atmfM4TrapAlarmSeverity } +-- STATUS current +-- DESCRIPTION +-- "Indicates that an RDI (Remote Defect Indication) +-- condition has occurred on the VCC TP associated +-- with the specified interface." +-- ::= { atmfM4MIBTraps 18 } +-- +-- +-- ATM NE and Hardware Unit Alarms +-- +--atmfM4HwBackPlaneAlarm NOTIFICATION-TYPE +-- OBJECTS { entPhysicalIndex, atmfM4TrapAlarmSeverity } +-- STATUS current +-- DESCRIPTION +-- "Indicates that a back-plane failure condition +-- has occurred on the hardware unit associated +-- with the specified index. +-- A hardware index of 0 indicates that the error +-- occurred in the ATM NE but not in any one hardware +-- unit maintained in the MIB table." +-- ::= { atmfM4MIBTraps 19 } +-- +--atmfM4HwCallEstErrAlarm NOTIFICATION-TYPE +-- OBJECTS { entPhysicalIndex, atmfM4TrapAlarmSeverity } +-- STATUS current +-- DESCRIPTION +-- "Indicates that a call establishment error condition +-- has occurred on the hardware unit associated +-- with the specified index. +-- A hardware index of 0 indicates that the error +-- occurred in the ATM NE but not in any one hardware +-- unit maintained in the MIB table." +-- ::= { atmfM4MIBTraps 20 } +-- +--atmfM4HwCongestionAlarm NOTIFICATION-TYPE +-- OBJECTS { entPhysicalIndex, atmfM4TrapAlarmSeverity } +-- STATUS current +-- DESCRIPTION +-- "Indicates that a congestion condition +-- has occurred on the hardware unit associated +-- with the specified index. +-- A hardware index of 0 indicates that the error +-- occurred in the ATM NE but not in any one hardware +-- unit maintained in the MIB table." +-- ::= { atmfM4MIBTraps 21 } +-- +--atmfM4HwExtIfDevProbAlarm NOTIFICATION-TYPE +-- OBJECTS { entPhysicalIndex, atmfM4TrapAlarmSeverity } +-- STATUS current +-- DESCRIPTION +-- "Indicates that an external interface device problem +-- has occurred on the hardware unit associated +-- with the specified index. +-- A hardware index of 0 indicates that the error +-- occurred in the ATM NE but not in any one hardware +-- unit maintained in the MIB table." +-- ::= { atmfM4MIBTraps 22 } +-- +atmfM4HwLineCardAlarm NOTIFICATION-TYPE + OBJECTS { entPhysicalIndex, atmfM4TrapAlarmSeverity } + STATUS current + DESCRIPTION + "Indicates that a line-card problem condition + has occurred on the hardware unit associated + with the specified index. + A hardware index of 0 indicates that the error + occurred in the ATM NE but not in any one hardware + unit maintained in the MIB table." + ::= { atmfM4MIBTraps 23 } + +--atmfM4HwMultiplexerAlarm NOTIFICATION-TYPE +-- OBJECTS { entPhysicalIndex, atmfM4TrapAlarmSeverity } +-- STATUS current +-- DESCRIPTION +-- "Indicates that a multiplexer problem condition +-- has occurred on the hardware unit associated +-- with the specified index. +-- A hardware index of 0 indicates that the error +-- occurred in the ATM NE but not in any one hardware +-- unit maintained in the MIB table." +-- ::= { atmfM4MIBTraps 24 } +-- +atmfM4HwPowerAlarm NOTIFICATION-TYPE + OBJECTS { entPhysicalIndex, atmfM4TrapAlarmSeverity } + STATUS current + DESCRIPTION + "Indicates that a power problem alarm condition + has occurred on the hardware unit associated + with the specified index. + A hardware index of 0 indicates that the error + occurred in the ATM NE but not in any one hardware + unit maintained in the MIB table." + ::= { atmfM4MIBTraps 25 } + +--atmfM4HwProcessorAlarm NOTIFICATION-TYPE +-- OBJECTS { entPhysicalIndex, atmfM4TrapAlarmSeverity } +-- STATUS current +-- DESCRIPTION +-- "Indicates that a processor problem alarm condition +-- has occurred on the hardware unit associated +-- with the specified index. +-- A hardware index of 0 indicates that the error +-- occurred in the ATM NE but not in any one hardware +-- unit maintained in the MIB table." +-- ::= { atmfM4MIBTraps 26 } +-- +--atmfM4HwProtectionPathAlarm NOTIFICATION-TYPE +-- OBJECTS { entPhysicalIndex, atmfM4TrapAlarmSeverity } +-- STATUS current +-- DESCRIPTION +-- "Indicates that a protection path problem condition +-- has occurred on the hardware unit associated +-- with the specified index. +-- A hardware index of 0 indicates that the error +-- occurred in the ATM NE but not in any one hardware +-- unit maintained in the MIB table." +-- ::= { atmfM4MIBTraps 27 } +-- +--atmfM4HwReceiverFailAlarm NOTIFICATION-TYPE +-- OBJECTS { entPhysicalIndex, atmfM4TrapAlarmSeverity } +-- STATUS current +-- DESCRIPTION +-- "Indicates that a receiver failure condition +-- has occurred on the hardware unit associated +-- with the specified index. +-- A hardware index of 0 indicates that the error +-- occurred in the ATM NE but not in any one hardware +-- unit maintained in the MIB table." +-- ::= { atmfM4MIBTraps 28 } +-- +atmfM4HwPIUnitMissingAlarm NOTIFICATION-TYPE + OBJECTS { entPhysicalIndex, atmfM4TrapAlarmSeverity } + STATUS current + DESCRIPTION + "Indicates that a plug-in unit missing condition + has occurred on the hardware unit associated + with the specified index. + A hardware index of 0 indicates that the error + occurred in the ATM NE but not in any one hardware + unit maintained in the MIB table." + ::= { atmfM4MIBTraps 29 } + +atmfM4HwPIUnitProbAlarm NOTIFICATION-TYPE + OBJECTS { entPhysicalIndex, atmfM4TrapAlarmSeverity } + STATUS current + DESCRIPTION + "Indicates that a plug-in unit problem condition + has occurred on the hardware unit associated + with the specified index. + A hardware index of 0 indicates that the error + occurred in the ATM NE but not in any one hardware + unit maintained in the MIB table." + ::= { atmfM4MIBTraps 30 } + +atmfM4HwPIUnitMismatchAlarm NOTIFICATION-TYPE + OBJECTS { entPhysicalIndex, atmfM4TrapAlarmSeverity } + STATUS current + DESCRIPTION + "Indicates that a plug-in unit type mismatch condition + has occurred on the hardware unit associated + with the specified index. + A hardware index of 0 indicates that the error + occurred in the ATM NE but not in any one hardware + unit maintained in the MIB table." + ::= { atmfM4MIBTraps 31 } + +atmfM4HwTimingProbAlarm NOTIFICATION-TYPE + OBJECTS { entPhysicalIndex, atmfM4TrapAlarmSeverity } + STATUS current + DESCRIPTION + "Indicates that a timing problem alarm condition + has occurred on the hardware unit associated + with the specified index. + A hardware index of 0 indicates that the error + occurred in the ATM NE but not in any one hardware + unit maintained in the MIB table." + ::= { atmfM4MIBTraps 32 } + +--atmfM4HwXmitterFailAlarm NOTIFICATION-TYPE +-- OBJECTS { entPhysicalIndex, atmfM4TrapAlarmSeverity } +-- STATUS current +-- DESCRIPTION +-- "Indicates that a transmitter failure condition +-- has occurred on the hardware unit associated +-- with the specified index. +-- A hardware index of 0 indicates that the error +-- occurred in the ATM NE but not in any one hardware +-- unit maintained in the MIB table." +-- ::= { atmfM4MIBTraps 33 } +-- +--atmfM4HwTrunkCardAlarm NOTIFICATION-TYPE +-- OBJECTS { entPhysicalIndex, atmfM4TrapAlarmSeverity } +-- STATUS current +-- DESCRIPTION +-- "Indicates that a trunk-card problem condition +-- has occurred on the hardware unit associated +-- with the specified index. +-- A hardware index of 0 indicates that the error +-- occurred in the ATM NE but not in any one hardware +-- unit maintained in the MIB table." +-- ::= { atmfM4MIBTraps 34 } +-- +--atmfM4HwStorageCapacityAlarm NOTIFICATION-TYPE +-- OBJECTS { entPhysicalIndex, atmfM4TrapAlarmSeverity } +-- STATUS current +-- DESCRIPTION +-- "Indicates that a storage capacity problem condition +-- has occurred on the hardware unit associated +-- with the specified index. +-- A hardware index of 0 indicates that the error +-- occurred in the ATM NE but not in any one hardware +-- unit maintained in the MIB table." +-- ::= { atmfM4MIBTraps 35 } +-- +--atmfM4HwMemoryMismatchAlarm NOTIFICATION-TYPE +-- OBJECTS { entPhysicalIndex, atmfM4TrapAlarmSeverity } +-- STATUS current +-- DESCRIPTION +-- "Indicates that a memory mismatch alarm condition +-- has occurred on the hardware unit associated +-- with the specified index. +-- A hardware index of 0 indicates that the error +-- occurred in the ATM NE but not in any one hardware +-- unit maintained in the MIB table." +-- ::= { atmfM4MIBTraps 36 } +-- +--atmfM4HwCorruptDataAlarm NOTIFICATION-TYPE +-- OBJECTS { entPhysicalIndex, atmfM4TrapAlarmSeverity } +-- STATUS current +-- DESCRIPTION +-- "Indicates that a corrupt data alarm condition +-- has occurred on the hardware unit associated +-- with the specified index. +-- A hardware index of 0 indicates that the error +-- occurred in the ATM NE but not in any one hardware +-- unit maintained in the MIB table." +-- ::= { atmfM4MIBTraps 37 } +-- +--atmfM4HwSwEnvironAlarm NOTIFICATION-TYPE +-- OBJECTS { entPhysicalIndex, atmfM4TrapAlarmSeverity } +-- STATUS current +-- DESCRIPTION +-- "Indicates that a software environment problem +-- has occurred on the hardware unit associated +-- with the specified index. +-- A hardware index of 0 indicates that the error +-- occurred in the ATM NE but not in any one hardware +-- unit maintained in the MIB table." +-- ::= { atmfM4MIBTraps 38 } +-- +atmfM4HwSwDownloadFailAlarm NOTIFICATION-TYPE + OBJECTS { entPhysicalIndex, atmfM4TrapAlarmSeverity } + STATUS current + DESCRIPTION + "Indicates that a software download failure + has occurred on the hardware unit associated + with the specified index. + A hardware index of 0 indicates that the error + occurred in the ATM NE but not in any one hardware + unit maintained in the MIB table." + ::= { atmfM4MIBTraps 39 } + +atmfM4HwVersionMismatchAlarm NOTIFICATION-TYPE + OBJECTS { entPhysicalIndex, atmfM4TrapAlarmSeverity } + STATUS current + DESCRIPTION + "Indicates that a version mismatch condition + has occurred on the hardware unit associated + with the specified index. + A hardware index of 0 indicates that the error + occurred in the ATM NE but not in any one hardware + unit maintained in the MIB table." + ::= { atmfM4MIBTraps 40 } + +atmfM4HwFanFailAlarm NOTIFICATION-TYPE + OBJECTS { entPhysicalIndex, atmfM4TrapAlarmSeverity } + STATUS current + DESCRIPTION + "Indicates that a cooling fan failure condition + has occurred on the hardware unit associated + with the specified index. + A hardware index of 0 indicates that the error + occurred in the ATM NE but not in any one hardware + unit maintained in the MIB table." + ::= { atmfM4MIBTraps 41 } + +--atmfM4HwDoorOpenAlarm NOTIFICATION-TYPE +-- OBJECTS { entPhysicalIndex, atmfM4TrapAlarmSeverity } +-- STATUS current +-- DESCRIPTION +-- "Indicates that an enclosure door open condition +-- has occurred on the hardware unit associated +-- with the specified index. +-- A hardware index of 0 indicates that the error +-- occurred in the ATM NE but not in any one hardware +-- unit maintained in the MIB table." +-- ::= { atmfM4MIBTraps 42 } +-- +--atmfM4HwFuseFailAlarm NOTIFICATION-TYPE +-- OBJECTS { entPhysicalIndex, atmfM4TrapAlarmSeverity } +-- STATUS current +-- DESCRIPTION +-- "Indicates that a fuse failure alarm condition +-- has occurred on the hardware unit associated +-- with the specified index. +-- A hardware index of 0 indicates that the error +-- occurred in the ATM NE but not in any one hardware +-- unit maintained in the MIB table." +-- ::= { atmfM4MIBTraps 43 } +-- +atmfM4HwHighTempAlarm NOTIFICATION-TYPE + OBJECTS { entPhysicalIndex, atmfM4TrapAlarmSeverity } + STATUS current + DESCRIPTION + "Indicates that a high temperature condition + has occurred on the hardware unit associated + with the specified index. + A hardware index of 0 indicates that the error + occurred in the ATM NE but not in any one hardware + unit maintained in the MIB table." + ::= { atmfM4MIBTraps 44 } + +-- +-- Software alarms +-- +atmfM4SwVersionMismatchAlarm NOTIFICATION-TYPE + OBJECTS { entPhysicalIndex, atmfM4HwInstalledSwIndex, + atmfM4TrapAlarmSeverity } + STATUS current + DESCRIPTION + "Indicates that a version mismatch condition + has occurred on the hardware unit associated + with the specified index. + A hardware index of 0 indicates that the error + occurred in the ATM NE but not in any one hardware + unit maintained in the MIB table." + ::= { atmfM4MIBTraps 45 } + +-- State change notification traps: + +--atmfM4VplTpUp NOTIFICATION-TYPE +-- OBJECTS { ifIndex, atmVplVpi } +-- STATUS current +-- DESCRIPTION +-- "Indicates that the operational state of the specified +-- VPL termination point has transitioned to 'up'." +-- ::= { atmfM4MIBTraps 46 } +-- +--atmfM4VplTpDown NOTIFICATION-TYPE +-- OBJECTS { ifIndex, atmVplVpi } +-- STATUS current +-- DESCRIPTION +-- "Indicates that the operational state of the specified +-- VPL termination point has transitioned to 'down'." +-- ::= { atmfM4MIBTraps 47 } +-- +--atmfM4VclTpUp NOTIFICATION-TYPE +-- OBJECTS { ifIndex, atmVclVpi, atmVclVci } +-- STATUS current +-- DESCRIPTION +-- "Indicates that the operational state of the specified +-- VCL termination point has transitioned to 'up'." +-- ::= { atmfM4MIBTraps 48 } +-- +--atmfM4VclTpDown NOTIFICATION-TYPE +-- OBJECTS { ifIndex, atmVclVpi, atmVclVci } +-- STATUS current +-- DESCRIPTION +-- "Indicates that the operational state of the specified +-- VCL termination point has transitioned to 'down'." +-- ::= { atmfM4MIBTraps 49 } +-- +--atmfM4VplXConnUp NOTIFICATION-TYPE +-- OBJECTS { atmVpCrossConnectIndex, +-- atmVpCrossConnectLowIfIndex, +-- atmVpCrossConnectLowVpi, +-- atmVpCrossConnectHighIfIndex, +-- atmVpCrossConnectHighVpi } +-- STATUS current +-- DESCRIPTION +-- "Indicates that the operational state of the specified +-- VPL cross-connection has transitioned to 'up'." +-- ::= { atmfM4MIBTraps 50 } +-- +--atmfM4VplXConnDown NOTIFICATION-TYPE +-- OBJECTS { atmVpCrossConnectIndex, +-- atmVpCrossConnectLowIfIndex, +-- atmVpCrossConnectLowVpi, +-- atmVpCrossConnectHighIfIndex, +-- atmVpCrossConnectHighVpi } +-- STATUS current +-- DESCRIPTION +-- "Indicates that the operational state of the specified +-- VPL cross-connection has transitioned to 'down'." +-- ::= { atmfM4MIBTraps 51 } +-- +--atmfM4VclXConnUp NOTIFICATION-TYPE +-- OBJECTS { atmVcCrossConnectIndex, +-- atmVcCrossConnectLowIfIndex, +-- atmVcCrossConnectLowVpi, +-- atmVcCrossConnectLowVci, +-- atmVcCrossConnectHighIfIndex, +-- atmVcCrossConnectHighVpi, +-- atmVcCrossConnectHighVci } +-- STATUS current +-- DESCRIPTION +-- "Indicates that the operational state of the specified +-- VCL cross-connection has transitioned to 'up'." +-- ::= { atmfM4MIBTraps 52 } +-- +--atmfM4VclXConnDown NOTIFICATION-TYPE +-- OBJECTS { atmVcCrossConnectIndex, +-- atmVcCrossConnectLowIfIndex, +-- atmVcCrossConnectLowVpi, +-- atmVcCrossConnectLowVci, +-- atmVcCrossConnectHighIfIndex, +-- atmVcCrossConnectHighVpi, +-- atmVcCrossConnectHighVci } +-- STATUS current +-- DESCRIPTION +-- "Indicates that the operational state of the specified +-- VCL cross-connection has transitioned to 'down'." +-- ::= { atmfM4MIBTraps 53 } +-- +atmfM4HwUnitUp NOTIFICATION-TYPE + OBJECTS { entPhysicalIndex, atmfM4TrapAlarmSeverity } + STATUS current + DESCRIPTION + "Indicates that the operational state of the specified + hardware unit has transitioned to 'up'." + ::= { atmfM4MIBTraps 54 } + +atmfM4HwUnitDown NOTIFICATION-TYPE + OBJECTS { entPhysicalIndex, atmfM4TrapAlarmSeverity } + STATUS current + DESCRIPTION + "Indicates that the operational state of the specified + hardware unit has transitioned to 'down'." + ::= { atmfM4MIBTraps 55 } + +-- +-- Object creation and deletion notification traps: + +atmfM4AtmCellIfCreated NOTIFICATION-TYPE + OBJECTS { ifIndex, atmfM4IfType } + STATUS current + DESCRIPTION + "Indicates that an ATM cell layer interface has just + been created on the interface." + ::= { atmfM4MIBTraps 56 } + +atmfM4AtmCellIfDeleted NOTIFICATION-TYPE + OBJECTS { ifIndex } + STATUS current + DESCRIPTION + "Indicates that the ATM cell layer interface has just + been deleted." + ::= { atmfM4MIBTraps 57 } + +--atmfM4VpcTpCreated NOTIFICATION-TYPE +-- OBJECTS { ifIndex, atmVplVpi } +-- STATUS current +-- DESCRIPTION +-- "Indicates that the VPC termination point has just +-- been created." +-- ::= { atmfM4MIBTraps 58 } +-- +--atmfM4VpcTpDeleted NOTIFICATION-TYPE +-- OBJECTS { ifIndex, atmVplVpi } +-- STATUS current +-- DESCRIPTION +-- "Indicates that the VPC termination point has just +-- been deleted." +-- ::= { atmfM4MIBTraps 59 } +-- +--atmfM4VccTpCreated NOTIFICATION-TYPE +-- OBJECTS { ifIndex, atmVclVpi, atmVclVci } +-- STATUS current +-- DESCRIPTION +-- "Indicates that the VCC termination point has just +-- been created." +-- ::= { atmfM4MIBTraps 60 } +-- +--atmfM4VccTpDeleted NOTIFICATION-TYPE +-- OBJECTS { ifIndex, atmVclVpi, atmVclVci } +-- STATUS current +-- DESCRIPTION +-- "Indicates that the VCC termination point has just +-- been deleted." +-- ::= { atmfM4MIBTraps 61 } +-- +--atmfM4VplXConnCreated NOTIFICATION-TYPE +-- OBJECTS { atmVpCrossConnectIndex, +-- atmVpCrossConnectLowIfIndex, +-- atmVpCrossConnectLowVpi, +-- atmVpCrossConnectHighIfIndex, +-- atmVpCrossConnectHighVpi } +-- STATUS current +-- DESCRIPTION +-- "Indicates that the VPL cross-connection has just +-- been created. When a cross-connection is created along +-- with its VPL endpoints, this trap should be emitted +-- to indicate the creation of the entire group of objects." +-- ::= { atmfM4MIBTraps 62 } +-- +--atmfM4VplXConnDeleted NOTIFICATION-TYPE +-- OBJECTS { atmVpCrossConnectIndex, +-- atmVpCrossConnectLowIfIndex, +-- atmVpCrossConnectLowVpi, +-- atmVpCrossConnectHighIfIndex, +-- atmVpCrossConnectHighVpi } +-- STATUS current +-- DESCRIPTION +-- "Indicates that the VPL cross-connection has just +-- been deleted. When a cross-connection is deleted along +-- with its VPL endpoints, this trap should be emitted +-- to indicate the deletion of the entire group of objects." +-- ::= { atmfM4MIBTraps 63 } +-- +--atmfM4VclXConnCreated NOTIFICATION-TYPE +-- OBJECTS { atmVcCrossConnectIndex, +-- atmVcCrossConnectLowIfIndex, +-- atmVcCrossConnectLowVpi, +-- atmVcCrossConnectLowVci, +-- atmVcCrossConnectHighIfIndex, +-- atmVcCrossConnectHighVpi, +-- atmVcCrossConnectHighVci } +-- STATUS current +-- DESCRIPTION +-- "Indicates that the VCL cross-connection has just +-- been created. When a cross-connection is created along +-- with its VCL endpoints, this trap should be emitted +-- to indicate the creation of the entire group of objects." +-- ::= { atmfM4MIBTraps 64 } +-- +--atmfM4VclXConnDeleted NOTIFICATION-TYPE +-- OBJECTS { atmVcCrossConnectIndex, +-- atmVcCrossConnectLowIfIndex, +-- atmVcCrossConnectLowVpi, +-- atmVcCrossConnectLowVci, +-- atmVcCrossConnectHighIfIndex, +-- atmVcCrossConnectHighVpi, +-- atmVcCrossConnectHighVci } +-- STATUS current +-- DESCRIPTION +-- "Indicates that the VCL cross-connection has just +-- been deleted. When a cross-connection is deleted along +-- with its VCL endpoints, this trap should be emitted +-- to indicate the deletion of the entire group of objects." +-- ::= { atmfM4MIBTraps 65 } +-- +atmfM4HwUnitCreated NOTIFICATION-TYPE + OBJECTS { entPhysicalContainedIn, + entPhysicalParentRelPos, + entPhysicalClass, + atmfM4TrapAlarmSeverity} + STATUS current + DESCRIPTION + "Indicates that the specified hardware unit has been + installed at the specified location." + ::= { atmfM4MIBTraps 66 } + +atmfM4HwUnitDeleted NOTIFICATION-TYPE + OBJECTS { entPhysicalContainedIn, + entPhysicalParentRelPos, + entPhysicalClass, + atmfM4TrapAlarmSeverity} + STATUS current + DESCRIPTION + "Indicates that the specified hardware unit has been + removed or de-instaleld from the specified location." + ::= { atmfM4MIBTraps 67 } +-- +--atmfM4InstalledSwCreated NOTIFICATION-TYPE +-- OBJECTS { atmfM4HwInstalledSwHwIndex, +-- hrSWInstalledIndex, +-- hrSWInstalledName } +-- STATUS current +-- DESCRIPTION +-- "Indicates that the specified software package has been +-- installed." +-- ::= { atmfM4MIBTraps 68 } +-- +--atmfM4InstalledSwDeleted NOTIFICATION-TYPE +-- OBJECTS { atmfM4HwInstalledSwHwIndex, +-- hrSWInstalledIndex, +-- hrSWInstalledName } +-- STATUS current +-- DESCRIPTION +-- "Indicates that the specified software package has been +-- removed." +-- ::= { atmfM4MIBTraps 69 } +-- +-- +-- Configuration change notification traps. + +atmfM4IfChanged NOTIFICATION-TYPE + OBJECTS { ifIndex } + STATUS current + DESCRIPTION + "Indicates that the configuration of the interface has + been changed." + ::= { atmfM4MIBTraps 70 } + +--atmfM4VplTpChanged NOTIFICATION-TYPE +-- OBJECTS { ifIndex, atmVplVpi } +-- STATUS current +-- DESCRIPTION +-- "Indicates that the VPL termination point config. has +-- been changed." +-- ::= { atmfM4MIBTraps 71 } +-- +--atmfM4VclTpChanged NOTIFICATION-TYPE +-- OBJECTS { ifIndex, atmVclVpi, atmVclVci } +-- STATUS current +-- DESCRIPTION +-- "Indicates that the VCL termination point config. has +-- been changed." +-- ::= { atmfM4MIBTraps 72 } +-- +--atmfM4VplXConnChanged NOTIFICATION-TYPE +-- OBJECTS { atmVpCrossConnectIndex, +-- atmVpCrossConnectLowIfIndex, +-- atmVpCrossConnectLowVpi, +-- atmVpCrossConnectHighIfIndex, +-- atmVpCrossConnectHighVpi } +-- STATUS current +-- DESCRIPTION +-- "Indicates that the VPL cross-connection config. has +-- been changed." +-- ::= { atmfM4MIBTraps 73 } +-- +--atmfM4VclXConnChanged NOTIFICATION-TYPE +-- OBJECTS { atmVcCrossConnectIndex, +-- atmVcCrossConnectLowIfIndex, +-- atmVcCrossConnectLowVpi, +-- atmVcCrossConnectLowVci, +-- atmVcCrossConnectHighIfIndex, +-- atmVcCrossConnectHighVpi, +-- atmVcCrossConnectHighVci } +-- STATUS current +-- DESCRIPTION +-- "Indicates that the VCL cross-connection config. has +-- been changed." +-- ::= { atmfM4MIBTraps 74 } +-- +--atmfM4HwUnitChanged NOTIFICATION-TYPE +-- OBJECTS { entPhysicalIndex } +-- STATUS current +-- DESCRIPTION +-- "Indicates that the specified hardware unit config. +-- has changed." +-- ::= { atmfM4MIBTraps 75 } +-- +--atmfM4InstalledSwChanged NOTIFICATION-TYPE +-- OBJECTS { hrSWInstalledIndex } +-- STATUS current +-- DESCRIPTION +-- "Indicates that the specified software package config. +-- has changed." +-- ::= { atmfM4MIBTraps 76 } +-- +-- +-- Conformance statements + + +atmfM4Groups OBJECT IDENTIFIER ::= { atmfM4MIBCompliance 1 } +atmfM4Compliances OBJECT IDENTIFIER ::= { atmfM4MIBCompliance 2 } + +-- compliance statements + +atmfM4Compliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statements are listed as a set up conformance units + that correspond to each table. Support for all tables is mandatory." + MODULE -- this module + MANDATORY-GROUPS {atmfM4General, atmfM4PhysPathTpGroup, atmfM4TcAdaptorGroup, + atmfM4AtmLayerGroup, atmfM4VplGroup, atmfM4VclGroup, atmfM4VpXConnGroup, + atmfM4VcXConnGroup, atmfM4VpNextVpiGroup, atmfM4VcNextVciGroup, + atmfM4CellProtoCurrGroup, atmfM4CellProtoHistGroup, atmfM4CellProtoErrorGroup, + atmfM4TcProtoCurrGroup, atmfM4TcProtoHistGroup, atmfM4VpUpcNpcCurrGroup, + atmfM4VpUpcNpcHistGroup, atmfM4VcUpcNpcCurrGroup, atmfM4VcUpcNpcHistGroup, + atmfM4VpTestGroup, atmfM4VcTestGroup, atmfM4EquipGroup, atmfM4EquipHolderGroup, + atmfM4PlugInUnitGroup, atmfM4HwRunningSwGroup, atmfM4HwInstalledSwGroup, + atmfM4AlarmSevGroup, atmfM4TrapForwardingGroup, + atmfM4TrapLogGroup, atmfM4LoggedTrapGroup, atmfM4LoggedAlarmGroup} + ::= { atmfM4Compliances 1 } +-- Replace 3 lines below with line 2 lines above +-- atmfM4TrapLogGroup, atmfM4LoggedTrapGroup, atmfM4LoggedAlarmGroup, +-- atmfM4NotificationsGroup} +-- ::= { atmfM4Compliances 1 } + +-- units of conformance + +atmfM4General OBJECT-GROUP + OBJECTS {atmfM4NeVendor, atmfM4NeVersion, atmfM4NeStartTime, atmfM4NeAlarmSeverityIndex, atmfM4NeSuppressZeroStats} + STATUS current + DESCRIPTION + "NE high level objects" + ::= { atmfM4Groups 1} + +atmfM4PhysPathTpGroup OBJECT-GROUP + OBJECTS {atmfM4PhysPathTpHwUnitIndex, atmfM4PhysPathTpPortID, + atmfM4PhysPathTpAlarmSeverityIndex} + STATUS current + DESCRIPTION + "The ATM Forum M4 interface Configuration table extensions + for the physical path termination point" + ::= { atmfM4Groups 2 } + +atmfM4TcAdaptorGroup OBJECT-GROUP + OBJECTS {atmfM4TcACellScrambling, atmfM4TcAlarmSeverityIndex} + STATUS current + DESCRIPTION + "The ATM Forum M4 interface Configuration table extensions + for the TC Adaptor." + ::= { atmfM4Groups 3 } + +atmfM4AtmLayerGroup OBJECT-GROUP + OBJECTS {atmfM4IfType, atmfM4IfLoopbackLocationCode, atmfM4IfSubscriberAddress, + atmfM4IfPreferredCarrier, atmfM4IfFarEndCarrierNetwork} + STATUS current + DESCRIPTION + "The ATM Forum M4 interface Configuration table extensions + for the ATM cell layer." + ::= { atmfM4Groups 4 } + +atmfM4VplGroup OBJECT-GROUP + OBJECTS {atmfM4VplSegEndPt} + STATUS current + DESCRIPTION + "The ATM Forum M4 VPL Termination Point Configuration + table extensions. " + ::= { atmfM4Groups 5 } + +atmfM4VclGroup OBJECT-GROUP + OBJECTS {atmfM4VclSegEndPt} + STATUS current + DESCRIPTION + "The ATM Forum M4 VCL Termination Point Configuration + table extensions." + ::= { atmfM4Groups 6 } + +atmfM4VpXConnGroup OBJECT-GROUP + OBJECTS {atmfM4VpXConnRecover} + STATUS current + DESCRIPTION + "The ATM Forum M4 VP Cross-Connect Configuration + table extensions." + ::= { atmfM4Groups 7 } + +atmfM4VcXConnGroup OBJECT-GROUP + OBJECTS {atmfM4VcXConnRecover} + STATUS current + DESCRIPTION + "The ATM Forum M4 VC Cross-Connect Configuration + table extensions." + ::= { atmfM4Groups 8 } + +atmfM4VpNextVpiGroup OBJECT-GROUP + OBJECTS {atmfM4VpNextVpiValue} + STATUS current + DESCRIPTION + "The ATM Forum M4 VP Next-VPI value table." + ::= { atmfM4Groups 9 } + +atmfM4VcNextVciGroup OBJECT-GROUP + OBJECTS {atmfM4VcNextVciValue} + STATUS current + DESCRIPTION + "The ATM Forum M4 VC Next-VCI value table." + ::= { atmfM4Groups 10 } + +atmfM4CellProtoCurrGroup OBJECT-GROUP + OBJECTS {atmfM4CellProtoCurrSuspect, atmfM4CellProtoCurrElapsedTime, + atmfM4CellProtoCurrSupprIntvls, atmfM4CellProtoCurrProtoErrors, + atmfM4CellProtoCurrInOAMCells} + STATUS current + DESCRIPTION + "The ATM Forum M4 Cell Protocol Monitoring Current Data + table." + ::= { atmfM4Groups 11 } + +atmfM4CellProtoHistGroup OBJECT-GROUP + OBJECTS {atmfM4CellProtoHistSuspect, atmfM4CellProtoHistElapsedTime, + atmfM4CellProtoHistSupprIntvls, atmfM4CellProtoHistProtoErrors, + atmfM4CellProtoHistInOAMCells} + STATUS current + DESCRIPTION + "The ATM Forum M4 Cell Protocol Monitoring History Data + table." + ::= { atmfM4Groups 12 } + +atmfM4CellProtoErrorGroup OBJECT-GROUP + OBJECTS {atmfM4CellProtoErrorTime, atmfM4CellProtoErrorReason, + atmfM4CellProtoErrorVpi, atmfM4CellProtoErrorVci} + STATUS current + DESCRIPTION + "The ATM Forum M4 Cell Protocol Monitoring Error Log + table." + ::= { atmfM4Groups 13 } + +atmfM4TcProtoCurrGroup OBJECT-GROUP + OBJECTS {atmfM4TcProtoCurrSuspect, atmfM4TcProtoCurrElapsedTime, + atmfM4TcProtoCurrSupprIntvls, atmfM4TcProtoCurrDiscardHECViol} + STATUS current + DESCRIPTION + "The ATM Forum M4 TC Adaptor Protocol Monitoring Current + Data table." + ::= { atmfM4Groups 14 } + +atmfM4TcProtoHistGroup OBJECT-GROUP + OBJECTS {atmfM4TcProtoHistSuspect, atmfM4TcProtoHistElapsedTime, + atmfM4TcProtoHistSupprIntvls, atmfM4TcProtoHistDiscardHECViol} + STATUS current + DESCRIPTION + "The ATM Forum M4 TC Adaptor Protocol Monitoring History + Data table." + ::= { atmfM4Groups 15 } + +atmfM4VpUpcNpcCurrGroup OBJECT-GROUP + OBJECTS {atmfM4VpUpcNpcCurrSuspect, atmfM4VpUpcNpcCurrElapsedTime, + atmfM4VpUpcNpcCurrSupprIntvls, atmfM4VpUpcNpcCurrDiscardedCells, + atmfM4VpUpcNpcCurrDiscardedClp0, atmfM4VpUpcNpcCurrPassedCells, + atmfM4VpUpcNpcCurrPassedClp0} + STATUS current + DESCRIPTION + "The ATM Forum M4 UPC/NPC Disagreement Monitoring Current + Data table for VPL termination points." + ::= { atmfM4Groups 16 } + +atmfM4VpUpcNpcHistGroup OBJECT-GROUP + OBJECTS {atmfM4VpUpcNpcHistSuspect, atmfM4VpUpcNpcHistElapsedTime, + atmfM4VpUpcNpcHistSupprIntvls, atmfM4VpUpcNpcHistDiscardedCells, + atmfM4VpUpcNpcHistDiscardedClp0, atmfM4VpUpcNpcHistPassedCells, + atmfM4VpUpcNpcHistPassedClp0} + STATUS current + DESCRIPTION + "The ATM Forum M4 UPC/NPC Disagreement Monitoring History + Data table for VPL termination points." + ::= { atmfM4Groups 17 } + +atmfM4VcUpcNpcCurrGroup OBJECT-GROUP + OBJECTS {atmfM4VcUpcNpcCurrSuspect, atmfM4VcUpcNpcCurrElapsedTime, + atmfM4VcUpcNpcCurrSupprIntvls, atmfM4VcUpcNpcCurrDiscardedCells, + atmfM4VcUpcNpcCurrDiscardedClp0, atmfM4VcUpcNpcCurrPassedCells, + atmfM4VcUpcNpcCurrPassedClp0} + STATUS current + DESCRIPTION + "The ATM Forum M4 UPC/NPC Disagreement Monitoring Current + Data table for VCL termination points" + ::= { atmfM4Groups 18 } + +atmfM4VcUpcNpcHistGroup OBJECT-GROUP + OBJECTS {atmfM4VcUpcNpcHistSuspect, atmfM4VcUpcNpcHistElapsedTime, + atmfM4VcUpcNpcHistSupprIntvls, atmfM4VcUpcNpcHistDiscardedCells, + atmfM4VcUpcNpcHistDiscardedClp0, atmfM4VcUpcNpcHistPassedCells, + atmfM4VcUpcNpcHistPassedClp0} + STATUS current + DESCRIPTION + "The ATM Forum M4 UPC/NPC Disagreement Monitoring History + Data table for VCL termination points." + ::= { atmfM4Groups 19 } + +atmfM4VpTestGroup OBJECT-GROUP + OBJECTS {atmfM4VpTestId, atmfM4VpTestStatus, atmfM4VpTestType, + atmfM4VpTestResult, atmfM4VpTestCode, atmfM4VpTestOwner} + STATUS current + DESCRIPTION + "The ATM Forum M4 VP Termination Point Test table." + ::= { atmfM4Groups 20 } + +atmfM4VcTestGroup OBJECT-GROUP + OBJECTS {atmfM4VcTestId, atmfM4VcTestStatus, atmfM4VcTestType, + atmfM4VcTestResult, atmfM4VcTestCode, atmfM4VcTestOwner} + STATUS current + DESCRIPTION + "The ATM Forum M4 VC Termination Point Test table." + ::= { atmfM4Groups 21 } + +atmfM4EquipGroup OBJECT-GROUP + OBJECTS {atmfM4EquipAdminStatus, atmfM4EquipLocation, atmfM4EquipOperStatus, + atmfM4EquipVendor, atmfM4EquipVersion, atmfM4EquipUserLabel, + atmfM4EquipAlarmSeverityIndex} + STATUS current + DESCRIPTION + "The ATM Forum M4 Equipment table." + ::= { atmfM4Groups 22 } + +atmfM4EquipHolderGroup OBJECT-GROUP + OBJECTS {atmfM4EquipHolderType, atmfM4EquipHolderAcceptableTypes, + atmfM4EquipHolderSlotStatus, atmfM4EquipHolderSwLoad} + STATUS current + DESCRIPTION + "The ATM Forum M4 Equipment Holder table." + ::= { atmfM4Groups 23 } + +atmfM4PlugInUnitGroup OBJECT-GROUP + OBJECTS {atmfM4PlugInUnitAdminStatus, atmfM4PlugInUnitAvailStatus, + atmfM4PlugInUnitOperStatus, atmfM4PlugInUnitVendor, atmfM4PlugInUnitVersion, + atmfM4PlugInUnitAlarmSeverityIndex} + STATUS current + DESCRIPTION + "The ATM Forum M4 Plug-In Unit table." + ::= { atmfM4Groups 24 } + +atmfM4HwRunningSwGroup OBJECT-GROUP + OBJECTS {atmfM4HwRunningSwSwIndex} + STATUS current + DESCRIPTION + "The ATM Forum M4 Hardware Unit/Running Software + table." + ::= { atmfM4Groups 25 } + +atmfM4HwInstalledSwGroup OBJECT-GROUP + OBJECTS {atmfM4HwInstalledSwSwIndex, atmfM4HwSwAlarmSeverityIndex} + STATUS current + DESCRIPTION + "The ATM Forum M4 Hardware Unit/Installed Software + table" + ::= { atmfM4Groups 26 } + +atmfM4AlarmSevGroup OBJECT-GROUP + OBJECTS {atmfM4AlarmSevProfileRowStatus, atmfM4AlarmSeverity, atmfM4AlarmSevDefault, + atmfM4AlarmSevProfileIndexNext } + STATUS current + DESCRIPTION + "Alarm handling objects" + ::= { atmfM4Groups 27 } + +atmfM4TrapForwardingGroup OBJECT-GROUP + OBJECTS {atmfM4TrapForwardingDest, atmfM4ForwardedTrapId, atmfM4ForwardedTrapObject, + atmfM4TrapForwardingPort, atmfM4LowestForwardedSeverity, + atmfM4ForwardedIndeterminate, atmfM4TrapForwardingRowStatus} + STATUS current + DESCRIPTION + "Trap forwarding table" + ::= { atmfM4Groups 28 } + +atmfM4TrapLogGroup OBJECT-GROUP + OBJECTS {atmfM4TrapLogAdminStatus, atmfM4TrapLogOperStatus, atmfM4TrapLogFullAction, + atmfM4TrapLogRowStatus} + STATUS current + DESCRIPTION + "The ATM Forum M4 Trap Agent log table." + ::= { atmfM4Groups 29 } + +atmfM4LoggedTrapGroup OBJECT-GROUP + OBJECTS {atmfM4LoggedTrapTime, atmfM4LoggedTrapID, atmfM4LoggedTrapObject, + atmfM4LoggedTrapRowStatus} + STATUS current + DESCRIPTION + "The ATM Forum M4 Trap Agent logged trap table." + ::= { atmfM4Groups 30 } + +atmfM4LoggedAlarmGroup OBJECT-GROUP + OBJECTS {atmfM4LoggedAlarmSeverity, atmfM4LoggedAlarmBackedUp, atmfM4LoggedAlarmBUObject, + atmfM4LoggedAlarmSpecificProb, atmfM4LoggedAlarmRepairAct, + atmfM4TrapAlarmSeverity, atmfM4TrapAlarmBackedUp, atmfM4TrapAlarmBUObject, + atmfM4TrapAlarmSpecificProb, atmfM4TrapAlarmRepairAct} + STATUS current + DESCRIPTION + "The ATM Forum M4 Trap Agent logged alarm trap table." + ::= { atmfM4Groups 31 } + +--atmfM4NotificationsGroup NOTIFICATION-GROUP +-- NOTIFICATIONS {atmfM4IfAisAlarm, atmfM4IfLcdAlarm, atmfM4IfLofAlarm, atmfM4IfLopAlarm, +-- atmfM4IfLosAlarm, atmfM4IfPayloadMismatchAlarm, atmfM4IfXmissionErrAlarm, +-- atmfM4IfPathTraceMismatchAlarm, atmfM4IfRdiAlarm, +-- atmfM4IfSignalLabelMismatchAlarm, atmfM4VplTpAisAlarm, atmfM4VplTpRdiAlarm, +-- atmfM4VpcTpAisAlarm, atmfM4VpcTpRdiAlarm, atmfM4VclTpAisAlarm, +-- atmfM4VclTpRdiAlarm, atmfM4VccTpAisAlarm, atmfM4VccTpRdiAlarm, +-- atmfM4HwBackPlaneAlarm, atmfM4HwCallEstErrAlarm, atmfM4HwCongestionAlarm, +-- atmfM4HwExtIfDevProbAlarm, atmfM4HwLineCardAlarm, atmfM4HwMultiplexerAlarm, +-- atmfM4HwPowerAlarm, atmfM4HwProcessorAlarm, atmfM4HwProtectionPathAlarm, +-- atmfM4HwReceiverFailAlarm, atmfM4HwPIUnitMissingAlarm, atmfM4HwPIUnitProbAlarm, +-- atmfM4HwPIUnitMismatchAlarm, atmfM4HwTimingProbAlarm, atmfM4HwXmitterFailAlarm, +-- atmfM4HwTrunkCardAlarm, atmfM4HwStorageCapacityAlarm, +-- atmfM4HwMemoryMismatchAlarm, atmfM4HwCorruptDataAlarm, atmfM4HwSwEnvironAlarm, +-- atmfM4HwSwDowloadFailAlarm, atmfM4HwVersionMismatchAlarm, atmfM4HwFanFailAlarm, +-- atmfM4HwDoorOpenAlarm, atmfM4HwFuseFailAlarm, atmfM4HwHighTempAlarm, +-- atmfM4SwVersionMismatchAlarm, atmfM4VplTpUp, atmfM4VplTpDown, atmfM4VclTpUp, +-- atmfM4VclTpDown, atmfM4VplXConnUp, atmfM4VplXConnDown, atmfM4VclXConnUp, +-- atmfM4VclXConnDown, atmfM4HwUnitUp, atmfM4HwUnitDown, atmfM4AtmCellIfCreated, +-- atmfM4AtmCellIfDeleted, atmfM4VpcTpCreated, atmfM4VpcTpDeleted, +-- atmfM4VccTpCreated, atmfM4VccTpDeleted, atmfM4VplXConnCreated, +-- atmfM4VplXConnDeleted, atmfM4VclXConnCreated, atmfM4VclXConnDeleted, +-- atmfM4HwUnitCreated, atmfM4HwUnitDeleted, atmfM4InstalledSwCreated, +-- atmfM4InstalledSwDeleted, atmfM4IfChanged, atmfM4VplTpChanged, +-- atmfM4VclTpChanged, atmfM4VplXConnChanged, atmfM4VclXConnChanged, +-- atmfM4HwUnitChanged, atmfM4InstalledSwChanged } +-- STATUS current +-- DESCRIPTION +-- "The ATM Forum M4 notification list." +-- ::= { atmfM4Groups 32 } + +END + |