diff options
| author | David Leutgeb <david.leutgeb@mannundmouse.com> | 2023-12-05 12:25:34 +0100 |
|---|---|---|
| committer | David Leutgeb <david.leutgeb@mannundmouse.com> | 2023-12-05 12:25:34 +0100 |
| commit | 98a672123c7872f6b9b75a9a2b6bb3aea504de6a (patch) | |
| tree | 9b13bd7f563c3198047bd359195327cf28b3caf0 /MIBS/ATM-FORUM-ILMI40-MIB | |
| download | mibs-main.tar.gz mibs-main.zip | |
Diffstat (limited to 'MIBS/ATM-FORUM-ILMI40-MIB')
| -rw-r--r-- | MIBS/ATM-FORUM-ILMI40-MIB | 2235 |
1 files changed, 2235 insertions, 0 deletions
diff --git a/MIBS/ATM-FORUM-ILMI40-MIB b/MIBS/ATM-FORUM-ILMI40-MIB new file mode 100644 index 0000000..f36285f --- /dev/null +++ b/MIBS/ATM-FORUM-ILMI40-MIB @@ -0,0 +1,2235 @@ + + ATM-FORUM-ILMI40-MIB DEFINITIONS ::= BEGIN + + -- RCSID information + + -- $RCSfile: atmf-ILMI40.mib,v $ + -- $Revision: 1.2 $ $State: Exp $ + -- $Date: 1997/06/24 22:13:48 $ + -- $Author: eric $ + + + -- This module provides authoritative definitions for Alcatel Internetworking, + -- Inc. implimentation of the ATM Forum ILMI 4.0 mib. It use and distribution + -- is regulated by both Alcatel Internetworking, Inc. and the ATM Forum. + + -- The Address registration (net/user sides) is implimented + -- in a hard state machine, thus these groups have been + -- commented out. + + -- This module will be extended, as needed. + + + -- Alcatel Internetworking, Inc. reserves the right to make changes in + -- specification and oher information contained in this document without + -- prior notice. The reader should consult Alcatel Internetworking, Inc. + -- to determine whether any such changes have been made. + -- Current MIBs are availible from the following URLs: + -- ftp://ftp.ind.alcatel.com/pub/products/mibs + -- http://www.ind.alcatel.com + + -- In no event shall Alcatel Internetworking, Inc. be liable for any incidental, + -- indirect, special, or consequential damages whatsoever (including + -- but not limited to lost profits) arising out of or related to this + -- document or the information contained in it, even if Alcatel Internetworking, + -- Inc. has been advised of, known, or should have known, the + -- possibility of such damages. + + -- atmf-ILMI40 + -- Revision: 1.00 + -- Date: Feb 21, 1997 + + + + IMPORTS + enterprises + FROM RFC1155-SMI + Counter, IpAddress + FROM RFC1155-SMI + DisplayString + FROM RFC1213-MIB + TRAP-TYPE + FROM RFC-1215 + OBJECT-TYPE + FROM RFC-1212 + ; + + +-- Textual Conventions + +-- All representations of ATM addresses in this MIB Module use +-- the data type: +AtmAddress ::= OCTET STRING (SIZE (0 .. 32)) +-- Note this data type is used only by the deprecated object +-- atmfPortAddress. Another definition (a refined one) is +-- specified in the Textual Conventions MIB. + +-- Boolean values use this data type from RFC-1903, "Textual Conventions +-- for Version 2 of the Simple Network Management Protocol (SNMPv2)" +TruthValue ::= INTEGER { true(1), false(2) } + +-- CLNP address values use this data type from RFC-1238, "CLNS MIB for +-- use with Connectionless Network Protocol (ISO 8473) and End System +-- to Intermediate System (ISO 9542)" +ClnpAddress ::= OCTET STRING (SIZE (1..21)) + +-- ATM Service Categories use this data type (See [TM4.0]): +AtmServiceCategory ::= + INTEGER { + other(1), + cbr(2), + rtVbr(3), + nrtVbr(4), + abr(5), + ubr(6) + } + +-- ATM End-System Addresses use this data type: +--AtmAddress ::= OCTET STRING (SIZE (8 | 20)) + +-- Network-Prefixes for an ATM Address use this data type: +--NetPrefix ::= OCTET STRING (SIZE (8 | 13)) + +-- In both the AtmAddress and NetPrefix conventions, Native E.164 addresses +-- are represented as 8 octets using the format specified in section +-- 3.1.1.3 of the ATM Forum UNI Signalling 4.0 specification. +-- In contrast, an NSAP-encoded address is 20 octets, and an NSAP-encoded +-- network prefix is 13 octets long. + + +-- MIB Groups + +-- a subtree for defining ATM Forum MIB object types +-- enterprises OBJECT IDENTIFIER ::= { 0 } +atmForum OBJECT IDENTIFIER ::= { enterprises 353 } + +-- a subtree for defining administrative object types +atmForumAdmin OBJECT IDENTIFIER ::= { atmForum 1 } +atmfTransmissionTypes OBJECT IDENTIFIER ::= { atmForumAdmin 2 } +atmfMediaTypes OBJECT IDENTIFIER ::= { atmForumAdmin 3 } +atmfTrafficDescrTypes OBJECT IDENTIFIER ::= { atmForumAdmin 4 } +atmfSrvcRegTypes OBJECT IDENTIFIER ::= { atmForumAdmin 5 } + +-- a subtree for defining ATM Interface MIB object types +atmForumUni OBJECT IDENTIFIER ::= { atmForum 2 } +atmfPhysicalGroup OBJECT IDENTIFIER ::= { atmForumUni 1 } +atmfAtmLayerGroup OBJECT IDENTIFIER ::= { atmForumUni 2 } +atmfAtmStatsGroup OBJECT IDENTIFIER ::= { atmForumUni 3 } +atmfVpcGroup OBJECT IDENTIFIER ::= { atmForumUni 4 } +atmfVccGroup OBJECT IDENTIFIER ::= { atmForumUni 5 } +atmfAddressGroup OBJECT IDENTIFIER ::= { atmForumUni 6 } +atmfNetPrefixGroup OBJECT IDENTIFIER ::= { atmForumUni 7 } +atmfSrvcRegistryGroup OBJECT IDENTIFIER ::= { atmForumUni 8 } +atmfVpcAbrGroup OBJECT IDENTIFIER ::= { atmForumUni 9 } +atmfVccAbrGroup OBJECT IDENTIFIER ::= { atmForumUni 10 } +atmfAddressRegistrationAdminGroup OBJECT IDENTIFIER ::= { atmForumUni 11 } + + +-- Object Identifier definitions + +-- Transmission Types: These values are no longer used +atmfUnknownType OBJECT IDENTIFIER ::= { atmfTransmissionTypes 1} +atmfSonetSTS3c OBJECT IDENTIFIER ::= { atmfTransmissionTypes 2 } +atmfDs3 OBJECT IDENTIFIER ::= { atmfTransmissionTypes 3 } +atmf4B5B OBJECT IDENTIFIER ::= { atmfTransmissionTypes 4 } +atmf8B10B OBJECT IDENTIFIER ::= { atmfTransmissionTypes 5 } +atmfSonetSTS12c OBJECT IDENTIFIER ::= { atmfTransmissionTypes 6 } +atmfE3 OBJECT IDENTIFIER ::= { atmfTransmissionTypes 7 } +atmfT1 OBJECT IDENTIFIER ::= { atmfTransmissionTypes 8 } +atmfE1 OBJECT IDENTIFIER ::= { atmfTransmissionTypes 9 } + +-- Media Types: These values are no longer used +atmfMediaUnknownType OBJECT IDENTIFIER ::= { atmfMediaTypes 1 } +atmfMediaCoaxCable OBJECT IDENTIFIER ::= { atmfMediaTypes 2 } +atmfMediaSingleMode OBJECT IDENTIFIER ::= { atmfMediaTypes 3 } +atmfMediaMultiMode OBJECT IDENTIFIER ::= { atmfMediaTypes 4 } +atmfMediaStp OBJECT IDENTIFIER ::= { atmfMediaTypes 5 } +atmfMediaUtp OBJECT IDENTIFIER ::= { atmfMediaTypes 6 } + +-- Traffic Descriptor Types: These types are combined with a five element +-- parameter vector to describe a Traffic Descriptor. +-- Traffic Descriptors along with a Best Effort Indicator are used to +-- indicate a Conformance Definition as defined in [TM4.0]. + +-- These types are no longer used +atmfNoDescriptor OBJECT IDENTIFIER ::= { atmfTrafficDescrTypes 1 } +atmfPeakRate OBJECT IDENTIFIER ::= { atmfTrafficDescrTypes 2 } + +-- The No CLP/No SCR Type +-- Indicates the CBR.1 Conformance Definition if Best Effort is No +-- Indicates the UBR.1 and UBR.2 Conformance Definitions if Best Effort is Yes +atmfNoClpNoScr OBJECT IDENTIFIER ::= { atmfTrafficDescrTypes 3 } +-- The use of the parameter vector for this type: + -- Parameter #1 - peak cell rate in cells/second for CLP=0+1 traffic + -- Parameter #2 - CDVT in tenths of microseconds + -- Parameters #3, #4 and #5 are unused + +-- These types are no longer used +atmfClpNoTaggingNoScr OBJECT IDENTIFIER ::= { atmfTrafficDescrTypes 4 } +atmfClpTaggingNoScr OBJECT IDENTIFIER ::= { atmfTrafficDescrTypes 5 } + +-- The SCR/No CLP Type +-- Indicates the VBR.1 Conformance Definition +atmfNoClpScr OBJECT IDENTIFIER ::= { atmfTrafficDescrTypes 6 } +-- The use of the parameter vector for this type: + -- Parameter #1 - peak cell rate in cells/second for CLP=0+1 traffic + -- Parameter #2 - sustainable cell rate in cells/second for CLP=0+1 traffic + -- Parameter #3 - maximum burst size in cells + -- Parameter #4 - CDVT in tenths of microseconds + -- Parameter #5 - unused + +-- The CLP without Tagging/SCR Type +-- Indicates the VBR.2 Conformance Definition +atmfClpNoTaggingScr OBJECT IDENTIFIER ::= { atmfTrafficDescrTypes 7 } +-- The use of the parameter vector for this type: + -- Parameter #1 - peak cell rate in cells/second for CLP=0+1 traffic + -- Parameter #2 - sustainable cell rate in cells/second for CLP=0 traffic + -- Parameter #3 - maximum burst size in cells + -- Parameter #4 - CDVT in tenths of microseconds + -- Parameter #5 - unused + +-- The CLP with Tagging/SCR Type +-- Indicates the VBR.3 Conformance Definition +atmfClpTaggingScr OBJECT IDENTIFIER ::= { atmfTrafficDescrTypes 8 } +-- The use of the parameter vector for this type: + -- Parameter #1 - peak cell rate in cells/second for CLP=0+1 traffic + -- Parameter #2 - sustainable cell rate in cells/second for CLP=0 + -- traffic, excess tagged as CLP=1 + -- Parameter #3 - maximum burst size in cells + -- Parameter #4 - CDVT in tenths of microseconds + -- Parameter #5 - unused + +-- The ABR Type +-- Indicates the ABR Conformance Definition +atmfClpNoTaggingMcr OBJECT IDENTIFIER ::= { atmfTrafficDescrTypes 9 } +-- The use of the parameter vector for this type: + -- Parameter #1 - peak cell rate in cells/second + -- parameter #2 - CDVT in tenths of microseconds + -- Parameter #3 - minimum cell rate in cells/second + -- Parameter #4 - unused + -- Parameter #5 - unused + + + +-- The Physical Port Group +-- +-- This group is mandatory for all ATM Interface devices. +-- +-- The Physical Port Table + +atmfPortTable OBJECT-TYPE + SYNTAX SEQUENCE OF AtmfPortEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A table of physical layer status and parameter + information for the ATM Interface's physical interface." + ::= { atmfPhysicalGroup 1 } + +atmfPortEntry OBJECT-TYPE + SYNTAX AtmfPortEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "An entry in the table, containing information about + the physical layer of an ATM Interface." + INDEX { atmfPortIndex } + ::= { atmfPortTable 1 } + +AtmfPortEntry ::= + SEQUENCE { + atmfPortIndex + INTEGER, + atmfPortAddress + AtmAddress, + atmfPortTransmissionType + OBJECT IDENTIFIER, + atmfPortMediaType + OBJECT IDENTIFIER, + atmfPortOperStatus + INTEGER, + atmfPortSpecific + OBJECT IDENTIFIER, + atmfPortMyIfName + DisplayString, + atmfPortMyIfIdentifier + INTEGER + + } + +atmfPortIndex OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The value of 0 which has the special meaning of + identifying the ATM Interface over which this message + was received." + ::= { atmfPortEntry 1 } + +atmfPortAddress OBJECT-TYPE + SYNTAX AtmAddress + ACCESS read-only + STATUS obsolete + DESCRIPTION + "This object should not be implemented except as + required for backward compatibility with version 2.0 + of the UNI specification. The Address Group, defined + in theAddress Registration MIB should be used instead." + ::= { atmfPortEntry 2 } + +atmfPortTransmissionType OBJECT-TYPE + SYNTAX OBJECT IDENTIFIER + ACCESS read-only + STATUS deprecated + DESCRIPTION + "This object should not be implemented except as + required for backward compatibility with version 3.1 + of the UNI specification. Appropriate Network Management + MIBs should be used instead." + ::= { atmfPortEntry 3 } + +atmfPortMediaType OBJECT-TYPE + SYNTAX OBJECT IDENTIFIER + ACCESS read-only + STATUS deprecated + DESCRIPTION + "This object should not be implemented except as + required for backward compatibility with version 3.1 + of the UNI specification. Appropriate Network Management + MIBs should be used instead." + ::= { atmfPortEntry 4 } + +atmfPortOperStatus OBJECT-TYPE + SYNTAX INTEGER { + other(1), + inService(2), + outOfService(3), + loopBack(4) + } + ACCESS read-only + STATUS deprecated + DESCRIPTION + "This object should not be implemented except as + required for backward compatibility with version 3.1 + of the UNI specification. Appropriate Network Management + MIBs should be used instead." + ::= { atmfPortEntry 5 } + +atmfPortSpecific OBJECT-TYPE + SYNTAX OBJECT IDENTIFIER + ACCESS read-only + STATUS deprecated + DESCRIPTION + "This object should not be implemented except as + required for backward compatibility with version 3.1 + of the UNI specification. Appropriate Network Management + MIBs should be used instead." + ::= { atmfPortEntry 6 } + +atmfPortMyIfName OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A textual name of this interface. If this system is + manageable through SNMP, and supports the object + ifName, the value of this object must be identical + with that of ifName for the ifEntry of the lowest + level physical interface for this port. This interface + must be uniquely named on this system to distinguish + parallel links with a neighboring system. If this + interface does not have a textual name, the value of + this object is a zero length string." + ::= { atmfPortEntry 7 } + +atmfPortMyIfIdentifier OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A unique value for each ATM interface. The scheme used to + number the ATM interfaces on an ATM device is + implementation specific. One way to generate this value is + to use the ifIndex that an SNMP manager would use to + identify the port. This interface must be uniquely numbered + on this system to distinguish parallel links with a + neighboring system." + ::= { atmfPortEntry 8 } + +-- Note: The typical IME will support only one of the following two objects +atmfMyIpNmAddress OBJECT-TYPE + SYNTAX IpAddress + ACCESS read-only + STATUS mandatory + DESCRIPTION + "An IP Address to which a Network Management Station + can send Network Management protocol messages, e.g. SNMP + messages to UDP port 161, in order to access network + management information concerning the operation of the + ATM device local to this IME. If this object is supported, + but the Network Management Agent has not been configured with + an IP Address, the IME should return 0.0.0.0." + ::= { atmfPhysicalGroup 2 } + +atmfMyOsiNmNsapAddress OBJECT-TYPE + SYNTAX ClnpAddress + ACCESS read-only + STATUS mandatory + DESCRIPTION + "An NSAP Address to which a Network Management Station + can send Network Management protocol messages in order + to access network management information concerning + the operation of the ATM device local to this IME. + If this object is supported, + but the Network Management Agent has not been configured with + an NSAP Address, the IME should return 0.0.0.0" + ::= { atmfPhysicalGroup 3 } + +atmfMySystemIdentifier OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (6)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A 48 bit identifier, taken from the IEEE universally + administered MAC address space, which uniquely + identifies the ATM device local to this IME." + ::= { atmfPhysicalGroup 4 } + + +-- The ATM Layer Group +-- This group is mandatory for all ATM Interfaces. +-- +-- ATM-layer specific information for the ATM Interface. + +atmfAtmLayerTable OBJECT-TYPE + SYNTAX SEQUENCE OF AtmfAtmLayerEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A table of ATM layer status and parameter information + for the ATM Interface." + ::= { atmfAtmLayerGroup 1 } + +atmfAtmLayerEntry OBJECT-TYPE + SYNTAX AtmfAtmLayerEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "An entry in the table, containing information about + the ATM layer of an ATM Interface." + INDEX { atmfAtmLayerIndex } + ::= { atmfAtmLayerTable 1 } + +AtmfAtmLayerEntry ::= + SEQUENCE { + atmfAtmLayerIndex + INTEGER, + atmfAtmLayerMaxVPCs + INTEGER, + atmfAtmLayerMaxVCCs + INTEGER, + atmfAtmLayerConfiguredVPCs + INTEGER, + atmfAtmLayerConfiguredVCCs + INTEGER, + atmfAtmLayerMaxVpiBits + INTEGER, + atmfAtmLayerMaxVciBits + INTEGER, + atmfAtmLayerUniType + INTEGER, + atmfAtmLayerUniVersion + INTEGER, + atmfAtmLayerDeviceType + INTEGER, + atmfAtmLayerIlmiVersion + INTEGER, + atmfAtmLayerNniSigVersion + INTEGER, + atmfAtmLayerMaxSvpcVpi + INTEGER, + atmfAtmLayerMaxSvccVpi + INTEGER, + atmfAtmLayerMinSvccVci + INTEGER + } + +atmfAtmLayerIndex OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The value of 0 which has the special meaning of + identifying the ATM Interface over which this message + was received." + ::= { atmfAtmLayerEntry 1 } + +atmfAtmLayerMaxVPCs OBJECT-TYPE + SYNTAX INTEGER (0..4096) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The maximum number of switched and permanent VPCs + supported on this ATM Interface. For virtual interfaces + (i.e. Virtual Path Connections), the maximum number of VPCs + PNNI may communicate over is set to zero." + ::= { atmfAtmLayerEntry 2 } + +atmfAtmLayerMaxVCCs OBJECT-TYPE + SYNTAX INTEGER (0..268435456) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The maximum number of switched and permanent VCCs + supported on this ATM Interface." + ::= { atmfAtmLayerEntry 3 } + +atmfAtmLayerConfiguredVPCs OBJECT-TYPE + SYNTAX INTEGER (0..4096) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of permanent VPCs configured for use on + this ATM Interface. For virtual interfaces (i.e. Virtual Path + Connections used by PNNI), the maximum number of VPCs + is set to zero." + ::= { atmfAtmLayerEntry 4 } + +atmfAtmLayerConfiguredVCCs OBJECT-TYPE + SYNTAX INTEGER (0..268435456) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of permanent VCCs configured for use on + this ATM Interface." + ::= { atmfAtmLayerEntry 5 } + +atmfAtmLayerMaxVpiBits OBJECT-TYPE + SYNTAX INTEGER (0..12) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The maximum number of active VPI bits on this ATM Interface. + For virtual interfaces (i.e. Virtual Path Connections used by PNNI), + this value has no meaning and is set to zero." + ::= { atmfAtmLayerEntry 6 } + +atmfAtmLayerMaxVciBits OBJECT-TYPE + SYNTAX INTEGER (0..16) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The maximum number of active VCI bits on this ATM Interface." + ::= { atmfAtmLayerEntry 7 } + +atmfAtmLayerUniType OBJECT-TYPE + SYNTAX INTEGER { public(1), private(2) } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The type of the ATM device, either public or private." + ::= { atmfAtmLayerEntry 8 } + +atmfAtmLayerUniVersion OBJECT-TYPE + SYNTAX INTEGER { + version2point0(1), + version3point0(2), + version3point1(3), + version4point0(4), + unsupported(5) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "An indication of the latest version of the ATM Forum UNI + Signalling Specification that is supported on this ATM + Interface. If this value is not present, a version of the UNI + earlier than 3.1 is supported. + + If the peer IME's value of this object is the same as, + or later than the local IME's value, then the version + corresponding to the local IME's value should be + attempted. Otherwise, if the peer IME's value of this + object is earlier, and supported locally, then the + local IME should attempt the version corresponding to + the peer IME's value. Otherwise, compatibility of the + two IMEs cannot be assumed." + ::= { atmfAtmLayerEntry 9 } + +atmfAtmLayerDeviceType OBJECT-TYPE + SYNTAX INTEGER { user(1), node(2) } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "This object determines the type of the ATM device. This + object is used in automatic ATM Interface-Type determination + procedure such that a correct operational ATM + Interface-type can be determined. An ATM End System + shall take the value of user(1), and an ATM network + node shall take the value of node(2)." + ::= { atmfAtmLayerEntry 10 } + +atmfAtmLayerIlmiVersion OBJECT-TYPE + SYNTAX INTEGER { unsupported(1), version4point0(2) } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "An indication of the latest version of the ATM Forum + ILMI Specification that is supported on this ATM Interface. + + If the peer IME's value of this object is the same as, + or later than the local IME's value, then the version + corresponding to the local IME's value should be + attempted. Otherwise, if the peer IME's value of this + object is earlier, and supported locally, then the + local IME should attempt the version corresponding to + the peer IME's value. Otherwise, compatibility of the + two IMEs cannot be assumed. + + If this object is not present, a version of the ILMI earlier + than 4.0 is supported." + ::= { atmfAtmLayerEntry 11 } + +atmfAtmLayerNniSigVersion OBJECT-TYPE + SYNTAX INTEGER { unsupported(1), iisp(2), + pnniVersion1point0(3) } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "An indication of the latest version of the ATM Forum + PNNI Signalling Specification that is supported on this + ATM Interface. Note that the PNNI routing version is not + determined through ILMI. + + If the peer IME's value of this object is the same as, + or later than the local IME's value, then the version + corresponding to the local IME's value should be + attempted. Otherwise, if the peer IME's value of this + object is earlier, and supported locally, then the + local IME should attempt the version corresponding to + the peer IME's value. Otherwise, compatibility of the + two IMEs cannot be assumed." + ::= { atmfAtmLayerEntry 12 } + +atmfAtmLayerMaxSvpcVpi OBJECT-TYPE + SYNTAX INTEGER (0..4096) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The maximum VPI that the signalling stack on the ATM + interface is configured to support for allocation to + switched virtual path connections." + ::= { atmfAtmLayerEntry 13 } + +atmfAtmLayerMaxSvccVpi OBJECT-TYPE + SYNTAX INTEGER (0..4096) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The maximum VPI that the signalling stack on the ATM + interface is configured to support for allocation to + switched virtual channel connections." + ::= { atmfAtmLayerEntry 14 } + +atmfAtmLayerMinSvccVci OBJECT-TYPE + SYNTAX INTEGER (0..65536) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "This is the minimum VCI value that the + signalling stack is configured to support for + allocation to switched virtual channel connections. The same + value applies to all SVCC VPI values for which the + signalling stack is configured." + ::= { atmfAtmLayerEntry 15 } + + +-- The ATM Statistics Group +-- This group is deprecated and should not be implemented except as +-- required for backward compatibility with version 3.1 of the UNI +-- specification. + +atmfAtmStatsTable OBJECT-TYPE + SYNTAX SEQUENCE OF AtmfAtmStatsEntry + ACCESS not-accessible + STATUS deprecated + DESCRIPTION + "This group is deprecated and should not be implemented + except as required for backward compatibility with version + 3.1 of the UNI specification." + ::= { atmfAtmStatsGroup 1 } + +atmfAtmStatsEntry OBJECT-TYPE + SYNTAX AtmfAtmStatsEntry + ACCESS not-accessible + STATUS deprecated + DESCRIPTION + "This object should not be implemented except as + required for backward compatibility with version 3.1 + of the UNI specification." + INDEX { atmfAtmStatsIndex } + ::= { atmfAtmStatsTable 1 } + +AtmfAtmStatsEntry ::= + SEQUENCE { + atmfAtmStatsIndex + INTEGER, + atmfAtmStatsReceivedCells + Counter, + atmfAtmStatsDroppedReceivedCells + Counter, + atmfAtmStatsTransmittedCells + Counter + } + +atmfAtmStatsIndex OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) + ACCESS read-only + STATUS deprecated + DESCRIPTION + "This object should not be implemented except as + required for backward compatibility with version 3.1 + of the UNI specification." + ::= { atmfAtmStatsEntry 1 } + +atmfAtmStatsReceivedCells OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS deprecated + DESCRIPTION + "This object should not be implemented except as + required for backward compatibility with version 3.1 + of the UNI specification." + ::= { atmfAtmStatsEntry 2 } + +atmfAtmStatsDroppedReceivedCells OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS deprecated + DESCRIPTION + "This object should not be implemented except as + required for backward compatibility with version 3.1 + of the UNI specification." + ::= { atmfAtmStatsEntry 3 } + +atmfAtmStatsTransmittedCells OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS deprecated + DESCRIPTION + "This object should not be implemented except as + required for backward compatibility with version 3.1 + of the UNI specification." + ::= { atmfAtmStatsEntry 4 } + + +-- The Virtual Path Group +-- This group is mandatory for all ATM Interfaces. +-- +-- Information concerning Virtual Path Connections + +atmfVpcTable OBJECT-TYPE + SYNTAX SEQUENCE OF AtmfVpcEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A table of status and parameter information on the + virtual path connections which cross this ATM + Interface. There is one entry in this table for each + permanent virtual path connection." + ::= { atmfVpcGroup 1 } + +atmfVpcEntry OBJECT-TYPE + SYNTAX AtmfVpcEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "An entry in the table, containing information about a + particular virtual path connection." + INDEX { atmfVpcPortIndex, atmfVpcVpi } + ::= { atmfVpcTable 1 } + +AtmfVpcEntry ::= + SEQUENCE { + atmfVpcPortIndex + INTEGER, + atmfVpcVpi + INTEGER, + atmfVpcOperStatus + INTEGER, + atmfVpcTransmitTrafficDescriptorType + OBJECT IDENTIFIER, + atmfVpcTransmitTrafficDescriptorParam1 + INTEGER, + atmfVpcTransmitTrafficDescriptorParam2 + INTEGER, + atmfVpcTransmitTrafficDescriptorParam3 + INTEGER, + atmfVpcTransmitTrafficDescriptorParam4 + INTEGER, + atmfVpcTransmitTrafficDescriptorParam5 + INTEGER, + atmfVpcReceiveTrafficDescriptorType + OBJECT IDENTIFIER, + atmfVpcReceiveTrafficDescriptorParam1 + INTEGER, + atmfVpcReceiveTrafficDescriptorParam2 + INTEGER, + atmfVpcReceiveTrafficDescriptorParam3 + INTEGER, + atmfVpcReceiveTrafficDescriptorParam4 + INTEGER, + atmfVpcReceiveTrafficDescriptorParam5 + INTEGER, + atmfVpcQoSCategory + INTEGER, + atmfVpcTransmitQoSClass + INTEGER, + atmfVpcReceiveQoSClass + INTEGER, + atmfVpcBestEffortIndicator + TruthValue, + atmfVpcServiceCategory + AtmServiceCategory + } + +atmfVpcPortIndex OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The value of 0 which has the special meaning of + identifying the ATM Interface over which this message + was received." + ::= { atmfVpcEntry 1 } + +atmfVpcVpi OBJECT-TYPE + SYNTAX INTEGER (0..4095) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The VPI value of this Virtual Path Connection at the + local ATM Interface." + ::= { atmfVpcEntry 2 } + +atmfVpcOperStatus OBJECT-TYPE + SYNTAX INTEGER { + unknown(1), + end2endUp(2), + end2endDown(3), + localUpEnd2endUnknown(4), + localDown(5) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The present actual operational status of the VPC. + + A value of end2endUp(2) or end2endDown(3) would be + used if the end-to-end status is known. If only local + status information is available, a value of + localUpEnd2endUnknown(4) or localDown(5) would be + used." + ::= { atmfVpcEntry 3 } + +atmfVpcTransmitTrafficDescriptorType OBJECT-TYPE + SYNTAX OBJECT IDENTIFIER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The type of traffic management, applicable to the + transmit direction of this VPC. The type may indicate + none, or a type with one or more parameters. These + parameters are specified as a parameter vector, in the + corresponding instances of the objects: + atmfVpcTransmitTrafficDescriptorParam1, + atmfVpcTransmitTrafficDescriptorParam2, + atmfVpcTransmitTrafficDescriptorParam3, + atmfVpcTransmitTrafficDescriptorParam4, and + atmfVpcTransmitTrafficDescriptorParam5." + ::= { atmfVpcEntry 4 } + +atmfVpcTransmitTrafficDescriptorParam1 OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The first parameter of the transmit parameter vector + for this VPC, used according to the value of + atmfVpcTransmitTrafficDescriptorType." + ::= { atmfVpcEntry 5 } + +atmfVpcTransmitTrafficDescriptorParam2 OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The second parameter of the transmit parameter vector + for this VPC, used according to the value of + atmfVpcTransmitTrafficDescriptorType." + ::= { atmfVpcEntry 6 } + +atmfVpcTransmitTrafficDescriptorParam3 OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The third parameter of the transmit parameter vector + for this VPC, used according to the value of + atmfVpcTransmitTrafficDescriptorType." + ::= { atmfVpcEntry 7 } + +atmfVpcTransmitTrafficDescriptorParam4 OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The fourth parameter of the transmit parameter vector + for this VPC, used according to the value of + atmfVpcTransmitTrafficDescriptorType." + ::= { atmfVpcEntry 8 } + +atmfVpcTransmitTrafficDescriptorParam5 OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The fifth parameter of the transmit parameter vector + for this VPC, used according to the value of + atmfVpcTransmitTrafficDescriptorType." + ::= { atmfVpcEntry 9 } + +atmfVpcReceiveTrafficDescriptorType OBJECT-TYPE + SYNTAX OBJECT IDENTIFIER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The type of traffic management, applicable to the + traffic in the receive direction of this VPC. The type + may indicate none, or a type with one or more + parameters. These parameters are specified as a + parameter vector, in the corresponding instances of + the objects: + atmfVpcReceiveTrafficDescriptorParam1, + atmfVpcReceiveTrafficDescriptorParam2, + atmfVpcReceiveTrafficDescriptorParam3, + atmfVpcReceiveTrafficDescriptorParam4, and + atmfVpcReceiveTrafficDescriptorParam5." + ::= { atmfVpcEntry 10 } + +atmfVpcReceiveTrafficDescriptorParam1 OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The first parameter of the receive parameter vector + for this VPC, used according to the value of + atmfVpcReceiveTrafficDescriptorType." + ::= { atmfVpcEntry 11 } + +atmfVpcReceiveTrafficDescriptorParam2 OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The second parameter of the receive parameter vector + for this VPC, used according to the value of + atmfVpcReceiveTrafficDescriptorType." + ::= { atmfVpcEntry 12 } + +atmfVpcReceiveTrafficDescriptorParam3 OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The third parameter of the receive parameter vector + for this VPC, used according to the value of + atmfVpcReceiveTrafficDescriptorType." + ::= { atmfVpcEntry 13 } + +atmfVpcReceiveTrafficDescriptorParam4 OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The fourth parameter of the receive parameter vector + for this VPC, used according to the value of + atmfVpcReceiveTrafficDescriptorType." + ::= { atmfVpcEntry 14 } + +atmfVpcReceiveTrafficDescriptorParam5 OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The fifth parameter of the receive parameter vector + for this VPC, used according to the value of + atmfVpcReceiveTrafficDescriptorType." + ::= { atmfVpcEntry 15 } + +atmfVpcQoSCategory OBJECT-TYPE + SYNTAX INTEGER { + other(1), + deterministic (2), + statistical (3), + unspecified (4) + } + ACCESS read-only + STATUS obsolete + DESCRIPTION + "This object should not be implemented except as + required for backward compatibility with version 2.0 + of the UNI specification." + ::= { atmfVpcEntry 16 } + +atmfVpcTransmitQoSClass OBJECT-TYPE + SYNTAX INTEGER (0..255) + ACCESS read-only + STATUS deprecated + DESCRIPTION + "This object should not be implemented except as + required for backward compatibility with version 3.1 + of the UNI specification." + ::= { atmfVpcEntry 17 } + +atmfVpcReceiveQoSClass OBJECT-TYPE + SYNTAX INTEGER (0..255) + ACCESS read-only + STATUS deprecated + DESCRIPTION + "This object should not be implemented except as + required for backward compatibility with version 3.1 + of the UNI specification." + ::= { atmfVpcEntry 18 } + +atmfVpcBestEffortIndicator OBJECT-TYPE + SYNTAX TruthValue + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The object is examined when + atmfVpcTransmitTrafficDescriptorType or + atmfVpcReceiveTrafficDescriptorType for the associated + connection is equal to atmfNoClpNoScr. + If this object is set to false(2), the network is requested + to apply the CBR.1 conformance definition. If this object + is set to true(1), the network is requested to apply the + UBR.1 conformance definition." + ::= { atmfVpcEntry 19 } + +atmfVpcServiceCategory OBJECT-TYPE + SYNTAX AtmServiceCategory + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The service category of this virtual path connection." + ::= { atmfVpcEntry 20 } + + +-- The Virtual Path ABR Group +-- This group contains per-VPC information, support for which is optional. +-- +-- Attributes of ABR Virtual Path connections + +atmfVpcAbrTable OBJECT-TYPE + SYNTAX SEQUENCE OF AtmfVpcAbrEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A table of operational parameters related to the ABR + virtual path connections which cross this ATM + Interface. There is one entry in this table for each + ABR virtual path connection. + + Each virtual path connection represented + in this table must also be represented by + an entry in the atmfVpcTable." + ::= { atmfVpcAbrGroup 1 } + +atmfVpcAbrEntry OBJECT-TYPE + SYNTAX AtmfVpcAbrEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "An entry in the table, containing information about a + particular ABR virtual path connection." + INDEX { atmfVpcAbrPortIndex, atmfVpcAbrVpi } + ::= { atmfVpcAbrTable 1 } + +AtmfVpcAbrEntry ::= + SEQUENCE { + atmfVpcAbrPortIndex + INTEGER, + atmfVpcAbrVpi + INTEGER, + atmfVpcAbrTransmitIcr + INTEGER, + atmfVpcAbrTransmitNrm + INTEGER, + atmfVpcAbrTransmitTrm + INTEGER, + atmfVpcAbrTransmitCdf + INTEGER, + atmfVpcAbrTransmitRif + INTEGER, + atmfVpcAbrTransmitRdf + INTEGER, + atmfVpcAbrTransmitAdtf + INTEGER, + atmfVpcAbrTransmitCrm + INTEGER + } + +atmfVpcAbrPortIndex OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The value of 0 which has the special meaning of identifying + the ATM Interface over which this message was received." + ::= { atmfVpcAbrEntry 1 } + +atmfVpcAbrVpi OBJECT-TYPE + SYNTAX INTEGER (0..4095) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The VPI value of this ABR Virtual Path Connection at the + local ATM Interface." + ::= { atmfVpcAbrEntry 2 } + +atmfVpcAbrTransmitIcr OBJECT-TYPE + SYNTAX INTEGER (0..16777215) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Initial Cell Rate: This is the rate at which the + source starts, both initially and after an idle period. + The unit is cells per second. The value must not be + larger than PCR, and is usually lower." + ::= { atmfVpcAbrEntry 3 } + +atmfVpcAbrTransmitNrm OBJECT-TYPE + SYNTAX INTEGER { + nrm2(1), + nrm4(2), + nrm8(3), + nrm16(4), + nrm32(5), + nrm64(6), + nrm128(7), + nrm256(8) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The maximum number of data cells a source may send + for each forward RM-cell. The default value is nrm32(5)." + ::= { atmfVpcAbrEntry 4 } + +atmfVpcAbrTransmitTrm OBJECT-TYPE + SYNTAX INTEGER { + trm0point78125(1), + trm1point5625(2), + trm3point125(3), + trm6point25(4), + trm12point5(5), + trm25(6), + trm50(7), + trm100(8) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Upper bound on the time between forward RM-cells for + an active source (in milliseconds). The default value + is trm100(8)." + ::= { atmfVpcAbrEntry 5 } + +atmfVpcAbrTransmitCdf OBJECT-TYPE + SYNTAX INTEGER { + cdf0(1), + cdfOneOver64(2), + cdfOneOver32(3), + cdfOneOver16(4), + cdfOneOver8(5), + cdfOneOver4(6), + cdfOneOver2(7), + cdfOne(8) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Cutoff Decrease Factor: This field controls the rate + decrease associated with lost or delayed backward RM + cells. Larger values result in faster rate decrease. + The default value is cdfOneOver16(4)." + ::= { atmfVpcAbrEntry 6 } + +atmfVpcAbrTransmitRif OBJECT-TYPE + SYNTAX INTEGER { + rifOneOver32768(1), + rifOneOver16384(2), + rifOneOver8192(3), + rifOneOver4096(4), + rifOneOver2048(5), + rifOneOver1024(6), + rifOneOver512(7), + rifOneOver256(8), + rifOneOver128(9), + rifOneOver64(10), + rifOneOver32(11), + rifOneOver16(12), + rifOneOver8(13), + rifOneOver4(14), + rifOneOver2(15), + rifOne(16) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Rate Increment Factor: Controls the rate at which the rate + increases, when a backward RM-cell is received with CI=0 and + NI=0. Larger values lead to faster rate increase. The default + value is rifOneOver16(12)." + ::= { atmfVpcAbrEntry 7 } + +atmfVpcAbrTransmitRdf OBJECT-TYPE + SYNTAX INTEGER { + rdfOneOver32768(1), + rdfOneOver16384(2), + rdfOneOver8192(3), + rdfOneOver4096(4), + rdfOneOver2048(5), + rdfOneOver1024(6), + rdfOneOver512(7), + rdfOneOver256(8), + rdfOneOver128(9), + rdfOneOver64(10), + rdfOneOver32(11), + rdfOneOver16(12), + rdfOneOver8(13), + rdfOneOver4(14), + rdfOneOver2(15), + rdfOne(16) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Rate Decrease Factor: Controls the rate decrease + which occurs when backward RM-cells with CI=1, are + received. Larger values lead to faster rate + decrease. The default value is rdfOneOver16(12)." + ::= { atmfVpcAbrEntry 8 } + +atmfVpcAbrTransmitAdtf OBJECT-TYPE + SYNTAX INTEGER (1..1023) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "ACR Decrease Time Factor: Time permitted between + sending RM-cells, before the allowed rate (ACR) is + decreased to ICR. Range is 10 ms to 10.23 seconds. + The unit is 10 milliseconds. For example, the default + value of 50 corresponds to a time factor of 500 ms. + Larger values allow a source to retain its current + rate longer, during periods of relative inactivity. + The default is 50 (0.5 seconds)." + ::= { atmfVpcAbrEntry 9 } + +atmfVpcAbrTransmitCrm OBJECT-TYPE + SYNTAX INTEGER (0..8388608) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "RM Cells Before Cutoff: Limits the number of forward + RM-cells which may be sent in the absence of received + backward RM-cells." + ::= { atmfVpcAbrEntry 10 } + + +-- The Virtual Channel Group +-- This group is mandatory for all ATM Interfaces. +-- +-- Information concerning Virtual Channel Connections + +atmfVccTable OBJECT-TYPE + SYNTAX SEQUENCE OF AtmfVccEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A table of status and parameter information on the + virtual channel connections which are visible at this + ATM Interface. There is one entry in this table for + each permanent virtual channel connection, including + reserved VCCs that are supported; e.g., signalling, + OAM flows, and ILMI, but not unassigned cells." + ::= { atmfVccGroup 1 } + +atmfVccEntry OBJECT-TYPE + SYNTAX AtmfVccEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "An entry in the table, containing information about a + particular virtual channel connection." + INDEX { atmfVccPortIndex, atmfVccVpi, atmfVccVci } + ::= { atmfVccTable 1 } + +AtmfVccEntry ::= + SEQUENCE { + atmfVccPortIndex + INTEGER, + atmfVccVpi + INTEGER, + atmfVccVci + INTEGER, + atmfVccOperStatus + INTEGER, + atmfVccTransmitTrafficDescriptorType + OBJECT IDENTIFIER, + atmfVccTransmitTrafficDescriptorParam1 + INTEGER, + atmfVccTransmitTrafficDescriptorParam2 + INTEGER, + atmfVccTransmitTrafficDescriptorParam3 + INTEGER, + atmfVccTransmitTrafficDescriptorParam4 + INTEGER, + atmfVccTransmitTrafficDescriptorParam5 + INTEGER, + atmfVccReceiveTrafficDescriptorType + OBJECT IDENTIFIER, + atmfVccReceiveTrafficDescriptorParam1 + INTEGER, + atmfVccReceiveTrafficDescriptorParam2 + INTEGER, + atmfVccReceiveTrafficDescriptorParam3 + INTEGER, + atmfVccReceiveTrafficDescriptorParam4 + INTEGER, + atmfVccReceiveTrafficDescriptorParam5 + INTEGER, + atmfVccQoSCategory + INTEGER, + atmfVccTransmitQoSClass + INTEGER, + atmfVccReceiveQoSClass + INTEGER, + atmfVccBestEffortIndicator + TruthValue, + atmfVccTransmitFrameDiscard + TruthValue, + atmfVccReceiveFrameDiscard + TruthValue, + atmfVccServiceCategory + AtmServiceCategory + } + +atmfVccPortIndex OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The value of 0 which has the special meaning of + identifying the ATM Interface over which this message + was received." + ::= { atmfVccEntry 1 } + +atmfVccVpi OBJECT-TYPE + SYNTAX INTEGER (0..4095) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The VPI value of this Virtual Channel Connection at + the local ATM Interface. For virtual interfaces (i.e. + Virtual Path Connections), this value has no meaning + and is set to zero " + ::= { atmfVccEntry 2 } + +atmfVccVci OBJECT-TYPE + SYNTAX INTEGER (0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The VCI value of this Virtual Channel Connection at + the local ATM Interface." + ::= { atmfVccEntry 3 } + +atmfVccOperStatus OBJECT-TYPE + SYNTAX INTEGER { + unknown(1), + end2endUp(2), + end2endDown(3), + localUpEnd2endUnknown(4), + localDown(5) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The present actual operational status of the VCC. A + value of end2endUp(2) or end2endUp(3) is used if the + end to end status is known. + + If only local status is known a value of + localUpEnd2endUnknown(4) or localDown(5) is used." + ::= { atmfVccEntry 4 } + +atmfVccTransmitTrafficDescriptorType OBJECT-TYPE + SYNTAX OBJECT IDENTIFIER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The type of traffic management, applicable to the + transmit direction of this VCC. The type may indicate + none, or a type with one or more parameters. These + parameters are specified as a parameter vector, in the + corresponding instances of the objects: + atmfVccTransmitTrafficDescriptorParam1, + atmfVccTransmitTrafficDescriptorParam2, + atmfVccTransmitTrafficDescriptorParam3, + atmfVccTransmitTrafficDescriptorParam4, and + atmfVccTransmitTrafficDescriptorParam5." + ::= { atmfVccEntry 5 } + +atmfVccTransmitTrafficDescriptorParam1 OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The first parameter of the transmit parameter vector + for this VCC, used according to the value of + atmfVccTransmitTrafficDescriptorType." + ::= { atmfVccEntry 6 } + +atmfVccTransmitTrafficDescriptorParam2 OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The second parameter of the transmit parameter vector + for this VCC, used according to the value of + atmfVccTransmitTrafficDescriptorType." + ::= { atmfVccEntry 7 } + +atmfVccTransmitTrafficDescriptorParam3 OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The third parameter of the transmit parameter vector + for this VCC, used according to the value of + atmfVccTransmitTrafficDescriptorType." + ::= { atmfVccEntry 8 } + +atmfVccTransmitTrafficDescriptorParam4 OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The fourth parameter of the transmit parameter vector + for this VCC, used according to the value of + atmfVccTransmitTrafficDescriptorType." + ::= { atmfVccEntry 9 } + +atmfVccTransmitTrafficDescriptorParam5 OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The fifth parameter of the transmit parameter vector + for this VCC, used according to the value of + atmfVccTransmitTrafficDescriptorType." + ::= { atmfVccEntry 10 } + +atmfVccReceiveTrafficDescriptorType OBJECT-TYPE + SYNTAX OBJECT IDENTIFIER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The type of traffic management, applicable to the + traffic in the receive direction of this VCC. The type + may indicate none, or a type with one or more + parameters. These parameters are specified as a + parameter vector, in the corresponding instances of + the objects: + atmfVccReceiveTrafficDescriptorParam1, + atmfVccReceiveTrafficDescriptorParam2, + atmfVccReceiveTrafficDescriptorParam3, + atmfVccReceiveTrafficDescriptorParam4, and + atmfVccReceiveTrafficDescriptorParam5." + ::= { atmfVccEntry 11 } + +atmfVccReceiveTrafficDescriptorParam1 OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The first parameter of the receive parameter vector + for this VCC, used according to the value of + atmfVccReceiveTrafficDescriptorType." + ::= { atmfVccEntry 12 } + +atmfVccReceiveTrafficDescriptorParam2 OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The second parameter of the receive parameter vector + for this VCC, used according to the value of + atmfVccReceiveTrafficDescriptorType." + ::= { atmfVccEntry 13 } + +atmfVccReceiveTrafficDescriptorParam3 OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The third parameter of the receive parameter vector + for this VCC, used according to the value of + atmfVccReceiveTrafficDescriptorType." + ::= { atmfVccEntry 14 } + +atmfVccReceiveTrafficDescriptorParam4 OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The fourth parameter of the receive parameter vector + for this VCC, used according to the value of + atmfVccReceiveTrafficDescriptorType." + ::= { atmfVccEntry 15 } + +atmfVccReceiveTrafficDescriptorParam5 OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The fifth parameter of the receive parameter vector + for this VCC, used according to the value of + atmfVccReceiveTrafficDescriptorType." + ::= { atmfVccEntry 16 } + +atmfVccQoSCategory OBJECT-TYPE + SYNTAX INTEGER { + other(1), + deterministic(2), + statistical(3), + unspecified(4) + } + ACCESS read-only + STATUS obsolete + DESCRIPTION + "This object should not be implemented except as + required for backward compatibility with version 2.0 + of the UNI specification." + ::= { atmfVccEntry 17 } + + atmfVccTransmitQoSClass OBJECT-TYPE + SYNTAX INTEGER (0..255) + ACCESS read-only + STATUS deprecated + DESCRIPTION + "This object should not be implemented except as + required for backward compatibility with version 3.1 + of the UNI specification." + ::= { atmfVccEntry 18 } + +atmfVccReceiveQoSClass OBJECT-TYPE + SYNTAX INTEGER (0..255) + ACCESS read-only + STATUS deprecated + DESCRIPTION + "This object should not be implemented except as + required for backward compatibility with version 3.1 + of the UNI specification." + ::= { atmfVccEntry 19 } + +atmfVccBestEffortIndicator OBJECT-TYPE + SYNTAX TruthValue + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The object is examined when + atmfVccTransmitTrafficDescriptorType or + atmfVccReceiveTrafficDescriptorType for the associated + connection is equal to atmfNoClpNoScr. + If this object is set to false(2), the network is requested + to apply the CBR.1 conformance definition. If this object + is set to true(1), the network is requested to apply the + UBR.1 conformance definition." + ::= { atmfVccEntry 20 } + +atmfVccTransmitFrameDiscard OBJECT-TYPE + SYNTAX TruthValue + ACCESS read-only + STATUS mandatory + DESCRIPTION + "If set to true(1), this object indicates that the network + is requested to treat data for this connection (in the + transmit direction) as frames (e.g. AAL5 CPCS_PDU's) rather + than as individual cells. While the precise + implementation is network-specific, this treatment may + for example involve discarding entire frames during + congestion, rather than a few cells from many frames. + The default value is false(2)." + ::= { atmfVccEntry 21 } + +atmfVccReceiveFrameDiscard OBJECT-TYPE + SYNTAX TruthValue + ACCESS read-only + STATUS mandatory + DESCRIPTION + "If set to true(1), this object indicates that the network + is requested to treat data for this connection (in the + receive direction) as frames (e.g. AAL5 CPCS_PDU's) rather + than as individual cells. While the precise + implementation is network-specific, this treatment may + for example involve discarding entire frames during + congestion, rather than a few cells from many frames. + The default value is false(2)." + ::= { atmfVccEntry 22 } + +atmfVccServiceCategory OBJECT-TYPE + SYNTAX AtmServiceCategory + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The service category of this virtual channel connection." + ::= { atmfVccEntry 23 } + + +-- The Virtual Channel ABR Group +-- This group contains per-VCC information, support for which is optional. +-- +-- Attributes of ABR Virtual Channel connections + +atmfVccAbrTable OBJECT-TYPE + SYNTAX SEQUENCE OF AtmfVccAbrEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A table of operational parameters related to the ABR + virtual channel connections which cross this ATM + Interface. There is one entry in this table for each + ABR virtual channel connection. + + Each virtual channel connection represented + in this table must also be represented by + an entry in the atmfVccTable." + ::= { atmfVccAbrGroup 1 } + +atmfVccAbrEntry OBJECT-TYPE + SYNTAX AtmfVccAbrEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "An entry in the table, containing information about a + particular ABR virtual channel connection." + INDEX { atmfVccAbrPortIndex, atmfVccAbrVpi, atmfVccAbrVci } + ::= { atmfVccAbrTable 1 } + +AtmfVccAbrEntry ::= + SEQUENCE { + atmfVccAbrPortIndex + INTEGER, + atmfVccAbrVpi + INTEGER, + atmfVccAbrVci + INTEGER, + atmfVccAbrTransmitIcr + INTEGER, + atmfVccAbrTransmitNrm + INTEGER, + atmfVccAbrTransmitTrm + INTEGER, + atmfVccAbrTransmitCdf + INTEGER, + atmfVccAbrTransmitRif + INTEGER, + atmfVccAbrTransmitRdf + INTEGER, + atmfVccAbrTransmitAdtf + INTEGER, + atmfVccAbrTransmitCrm + INTEGER + } + +atmfVccAbrPortIndex OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The value of 0 which has the special meaning of identifying + the ATM Interface over which this message was received." + ::= { atmfVccAbrEntry 1 } + +atmfVccAbrVpi OBJECT-TYPE + SYNTAX INTEGER (0..4095) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The VPI value of this ABR Virtual Channel Connection at the + local ATM Interface. For virtual interfaces (i.e. Virtual Path + Connections), this value has no meaning and is set to zero " + ::= { atmfVccAbrEntry 2 } + +atmfVccAbrVci OBJECT-TYPE + SYNTAX INTEGER (0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The VCI value of this ABR Virtual Channel Connection at the + local ATM Interface." + ::= { atmfVccAbrEntry 3 } + +atmfVccAbrTransmitIcr OBJECT-TYPE + SYNTAX INTEGER (0..16777215) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Initial Cell Rate: This is the rate at which the + source starts, both initially and after an idle period. + The unit is cells per second. The value must not be + larger than PCR, and is usually lower." + ::= { atmfVccAbrEntry 4 } + +atmfVccAbrTransmitNrm OBJECT-TYPE + SYNTAX INTEGER { + nrm2(1), + nrm4(2), + nrm8(3), + nrm16(4), + nrm32(5), + nrm64(6), + nrm128(7), + nrm256(8) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The maximum number of data cells a source may send + for each forward RM-cell. The default value is nrm32(5)." + ::= { atmfVccAbrEntry 5 } + +atmfVccAbrTransmitTrm OBJECT-TYPE + SYNTAX INTEGER { + trm0point78125(1), + trm1point5625(2), + trm3point125(3), + trm6point25(4), + trm12point5(5), + trm25(6), + trm50(7), + trm100(8) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Upper bound on the time between forward RM-cells for + an active source (in milliseconds). The default value + is trm100(8)." + ::= { atmfVccAbrEntry 6 } + +atmfVccAbrTransmitCdf OBJECT-TYPE + SYNTAX INTEGER { + cdf0(1), + cdfOneOver64(2), + cdfOneOver32(3), + cdfOneOver16(4), + cdfOneOver8(5), + cdfOneOver4(6), + cdfOneOver2(7), + cdfOne(8) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Cutoff Decrease Factor: This field controls the rate + decrease associated with lost or delayed backward RM + cells. Larger values result in faster rate decrease. + The default value is cdfOneOver16(4)." + ::= { atmfVccAbrEntry 7 } + +atmfVccAbrTransmitRif OBJECT-TYPE + SYNTAX INTEGER { + rifOneOver32768(1), + rifOneOver16384(2), + rifOneOver8192(3), + rifOneOver4096(4), + rifOneOver2048(5), + rifOneOver1024(6), + rifOneOver512(7), + rifOneOver256(8), + rifOneOver128(9), + rifOneOver64(10), + rifOneOver32(11), + rifOneOver16(12), + rifOneOver8(13), + rifOneOver4(14), + rifOneOver2(15), + rifOne(16) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Rate Increment Factor: Controls the rate at which the rate + increases, when a backward RM-cell is received with CI=0 and + NI=0. Larger values lead to faster rate increase. The default + value is rifOneOver16(12)." + ::= { atmfVccAbrEntry 8 } + +atmfVccAbrTransmitRdf OBJECT-TYPE + SYNTAX INTEGER { + rdfOneOver32768(1), + rdfOneOver16384(2), + rdfOneOver8192(3), + rdfOneOver4096(4), + rdfOneOver2048(5), + rdfOneOver1024(6), + rdfOneOver512(7), + rdfOneOver256(8), + rdfOneOver128(9), + rdfOneOver64(10), + rdfOneOver32(11), + rdfOneOver16(12), + rdfOneOver8(13), + rdfOneOver4(14), + rdfOneOver2(15), + rdfOne(16) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Rate Decrease Factor: Controls the rate decrease + which occurs when backward RM-cells with CI=1, are + received. Larger values lead to faster rate + decrease. The default value is rdfOneOver16(12)." + ::= { atmfVccAbrEntry 9 } + +atmfVccAbrTransmitAdtf OBJECT-TYPE + SYNTAX INTEGER (1..1023) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "ACR Decrease Time Factor: Time permitted between + sending RM-cells, before the allowed rate (ACR) is + decreased to ICR. Range is 10 ms to 10.23 seconds. + The unit is 10 milliseconds. For example, the default + value of 50 corresponds to a time factor of 500 ms. + Larger values allow a source to retain its current + rate longer, during periods of relative inactivity. + The default is 50 (0.5 seconds)." + ::= { atmfVccAbrEntry 10 } + +atmfVccAbrTransmitCrm OBJECT-TYPE + SYNTAX INTEGER (0..8388608) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "RM Cells Before Cutoff: Limits the number of forward + RM-cells which may be sent in the absence of received + backward RM-cells." + ::= { atmfVccAbrEntry 11 } + + +-- Traps +atmfVpcChange TRAP-TYPE + ENTERPRISE atmForum + VARIABLES { atmfVpcPortIndex, atmfVpcVpi, atmfVpcOperStatus } + DESCRIPTION + "An atmfVpcChange trap indicates that a permanent VPC has been + added or deleted at this ATM Interface or that the attributes + of an existing VPC have been modified. The variables + included in the trap identify the VPI value of the + reconfigured VPC at this ATM Interface." + ::= 1 + +atmfVccChange TRAP-TYPE + ENTERPRISE atmForum + VARIABLES { atmfVccPortIndex, atmfVccVci, atmfVccVpi, + atmfVccOperStatus } + DESCRIPTION + "An atmfVccChange trap indicates that a permanent VCC has been + added or deleted at this ATM Interface or that the attributes + of an existing VCC have been modified.. The variables + included in the trap identify the VCI and VPI values + of the reconfigured VCC at this ATM + Interface." + ::= 2 + + +-- The NetPrefix Group +-- +-- The Network Prefix Table is implemented by the user-side IME. + +-- This is hardcoded into UME... mgo, Xylan + +--atmfNetPrefixTable OBJECT-TYPE + --SYNTAX SEQUENCE OF AtmfNetPrefixEntry + --ACCESS not-accessible + --STATUS mandatory + --DESCRIPTION + --"A table implemented by the user-side IME, containing the + --network-prefix(es) for ATM-layer addresses in effect on + --the user side of the UNI." + --::= { atmfNetPrefixGroup 1 } + +--atmfNetPrefixEntry OBJECT-TYPE + --SYNTAX AtmfNetPrefixEntry + --ACCESS not-accessible + --STATUS mandatory + --DESCRIPTION + --"Information about a single network-prefix for + --ATM-layer addresses in effect on the user-side IME. + --Note that the index variable atmNetPrefixPrefix is a + --variable-length string, and as such the rule for + --variable-length strings in section 4.1.6 of RFC 1212 + --applies." + + --INDEX { atmfNetPrefixPort, atmfNetPrefixPrefix } + --::= { atmfNetPrefixTable 1 } + +--AtmfNetPrefixEntry ::= + --SEQUENCE { + --atmfNetPrefixPort + --INTEGER, + --atmfNetPrefixPrefix + --NetPrefix, + --atmfNetPrefixStatus + --INTEGER + --} + +--atmfNetPrefixPort OBJECT-TYPE + --SYNTAX INTEGER (0..2147483647) + --ACCESS not-accessible + --STATUS mandatory + --DESCRIPTION + --"A unique value which identifies the UNI port for + --which the network prefix for ATM addresses is in + --effect. The value of 0 has the special meaning of + --identifying the local UNI." + --::= { atmfNetPrefixEntry 1 } +-- +--atmfNetPrefixPrefix OBJECT-TYPE + --SYNTAX NetPrefix + --ACCESS not-accessible + --STATUS mandatory + --DESCRIPTION + --"The network prefix for ATM addresses which is in + --effect on the user side of the ATM UNI port." + --::= { atmfNetPrefixEntry 2 } +-- +--atmfNetPrefixStatus OBJECT-TYPE + --SYNTAX INTEGER { valid(1), invalid(2) } + --ACCESS read-write + --STATUS mandatory + --DESCRIPTION + --"An indication of the validity of the network prefix + --for ATM addresses on the user side of the UNI port. + --To configure a new network prefix in this table, the + --network-side IME must set the appropriate instance of this + --object to the value valid(1). To delete an existing + --network prefix in this table, the network-side IME must + --set the appropriate instance of this object to the + --value invalid(2). +-- + --If circumstances occur on the user-side IME which cause a + --prefix to become invalid, the user-side IME modifies the + --value of the appropriate instance of this object to invalid(2). +-- + --Whenever the value of this object for a particular + --prefix becomes invalid(2), the conceptual row for that + --prefix may be removed from the table at any time, + --either immediately or subsequently." + --::= { atmfNetPrefixEntry 3 } +-- +-- +-- The Address Group +-- +-- The Address Table is implemented by the network-side IME. +-- +atmfAddressTable OBJECT-TYPE + SYNTAX SEQUENCE OF AtmfAddressEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A table implemented by the network-side IME, containing the + ATM-layer addresses in effect on the user side of the UNI." + ::= { atmfAddressGroup 1 } + +atmfAddressEntry OBJECT-TYPE + SYNTAX AtmfAddressEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Information about a single ATM-layer address in effect + on the user-side IME. Note that the index variable + atmAddressAtmAddress is a variable-length string, and as + such the rule for variable-length strings in section + 4.1.6 of RFC 1212 applies." + INDEX { atmfAddressPort, atmfAddressAtmAddress } + ::= { atmfAddressTable 1 } + +AtmfAddressEntry ::= + SEQUENCE { + atmfAddressPort + INTEGER, + atmfAddressAtmAddress + AtmAddress, + atmfAddressStatus + INTEGER, + atmfAddressOrgScope + INTEGER + } + +atmfAddressPort OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A unique value which identifies the UNI port for + which the ATM address is in effect. The value of 0 + has the special meaning of identifying the local UNI." + ::= { atmfAddressEntry 1 } + +atmfAddressAtmAddress OBJECT-TYPE + SYNTAX AtmAddress + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "The ATM address which is in effect on the user side + of the ATM UNI port." + ::= { atmfAddressEntry 2 } + +atmfAddressStatus OBJECT-TYPE + SYNTAX INTEGER { valid(1), invalid(2) } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "An indication of the validity of the ATM address at + the user side of the UNI port. To configure a new + address in this table, the user-side IME must set the + appropriate instance of this object to the value + valid(1). To delete an existing address in this table, + the user-side IME must set the appropriate instance of + this object to the value invalid(2). + + If circumstances occur on the network-side IME which cause + an address to become invalid, the network-side IME + modifies the value of the appropriate instance of this + object to invalid(2). + + Whenever the value of this object for a particular + address becomes invalid(2), the conceptual row for + that address may be removed from the table at any + time, either immediately or subsequently." + ::= { atmfAddressEntry 3 } + +atmfAddressOrgScope OBJECT-TYPE + SYNTAX INTEGER { + localNetwork(1), + localNetworkPlusOne(2), + localNetworkPlusTwo(3), + siteMinusOne(4), + intraSite(5), + sitePlusOne(6), + organizationMinusOne(7), + intraOrganization(8), + organizationPlusOne(9), + communityMinusOne(10), + intraCommunity(11), + communityPlusOne(12), + regional(13), + interRegional(14), + global(15) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "This object indicates the organizational + scope for the referenced address. The information of + the referenced address shall not be distributed + outside the indicated scope. If the user-side IME does + not specify a value for the atmfAddressOrgScope object, + the network shall set the value of this object to + localNetwork(1), if the registered address is an ATM group + address, or to global(15), if the registered address is + an individual address. Refer to Annex 6.0 + of ATM Forum UNI Signalling 4.0 for guidelines regarding + the use of organizational scopes. + + This organization hierarchy may be mapped to ATM network's + routing hierarchy such as PNNI's routing level and + the mapping shall be configurable in + nodes. Use of this object in a public network is for + further study. + The default values for organizational scope are + localNetwork(1) for ATM group addresses, and global(15) + for individual addresses." + ::= { atmfAddressEntry 4 } + + +-- The Address Registration Admin Group +-- +-- The Address Registration Admin Table is mandatory for all IMEs. + +atmfAddressRegistrationAdminTable OBJECT-TYPE + SYNTAX SEQUENCE OF AtmfAddressRegistrationAdminEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A table of Address Registration administrative + information for the ATM Interface." + ::= { atmfAddressRegistrationAdminGroup 1 } + +atmfAddressRegistrationAdminEntry OBJECT-TYPE + SYNTAX AtmfAddressRegistrationAdminEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "An entry in the table, containing Address + Registration administrative information for the ATM + Interface." + INDEX { atmfAddressRegistrationAdminIndex } + ::= { atmfAddressRegistrationAdminTable 1 } + + +AtmfAddressRegistrationAdminEntry ::= + SEQUENCE { + atmfAddressRegistrationAdminIndex + INTEGER, + atmfAddressRegistrationAdminStatus + INTEGER + } + +atmfAddressRegistrationAdminIndex OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The value of 0 which has the special meaning of + identifying the ATM Interface over which this message + was received." + ::= { atmfAddressRegistrationAdminEntry 1 } + +atmfAddressRegistrationAdminStatus OBJECT-TYPE + SYNTAX INTEGER { supported(1), unsupported(2) } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "An indication of whether or not Address Registration + is supported on this ATM Interface. Supported(1) + indicates that this ATM Interface supports address + registration. Unsupported(2) indicates that this ATM + Interface does not support address registration." + ::= { atmfAddressRegistrationAdminEntry 2 } + + +-- Object Identifier definitions + +-- The following values are defined for use as possible values +-- of the atmfSrvcRegServiceID object. + +-- LAN Emulation Configuration Server (LECS) +atmfSrvcRegLecs OBJECT IDENTIFIER ::= { atmfSrvcRegTypes 1 } +-- When atmfSrvcRegServiceID has a value of atmfSrvcRegLecs, +-- the value of atmfSrvcRegParm1 is ignored. + +-- ATM Name Server (ANS) +atmfSrvcRegAns OBJECT IDENTIFIER ::= { atmfSrvcRegTypes 2 } +-- When atmfSrvcRegServiceID has a value of atmfSrvcRegAns, +-- the value of atmfSrvcRegParm1 is ignored. + + +-- The Service Registry Table +-- +-- The Service Registry Table is implemented by the network-side IME + +atmfSrvcRegTable OBJECT-TYPE + SYNTAX SEQUENCE OF AtmfSrvcRegEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "The table implemented by the IME on the network side of + the ATM UNI port contains all of the services that are + available to the user-side IME indexed by service + identifier." + ::= { atmfSrvcRegistryGroup 1 } + +atmfSrvcRegEntry OBJECT-TYPE + SYNTAX AtmfSrvcRegEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Information about a single service provider that is + available to the user-side IME." + INDEX { atmfSrvcRegPort, atmfSrvcRegServiceID, + atmfSrvcRegAddressIndex } + ::= { atmfSrvcRegTable 1 } + +AtmfSrvcRegEntry ::= + SEQUENCE { + atmfSrvcRegPort + INTEGER, + atmfSrvcRegServiceID + OBJECT IDENTIFIER, + atmfSrvcRegATMAddress + AtmAddress, + atmfSrvcRegAddressIndex + INTEGER, + atmfSrvcRegParm1 + OCTET STRING + } + +atmfSrvcRegPort OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "The value of 0 which has the special meaning of + identifying the ATM Interface over which this message + was received." + ::= { atmfSrvcRegEntry 1 } + +atmfSrvcRegServiceID OBJECT-TYPE + SYNTAX OBJECT IDENTIFIER + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "This is the service identifier which uniquely identifies + the type of service at the address provided in the table." + ::= { atmfSrvcRegEntry 2 } + +atmfSrvcRegATMAddress OBJECT-TYPE + SYNTAX AtmAddress + ACCESS read-only + STATUS mandatory + DESCRIPTION + "This is the full address of the service. The user-side + IME may use this address to establish a connection + with the service." + ::= { atmfSrvcRegEntry 3 } + +atmfSrvcRegAddressIndex OBJECT-TYPE + SYNTAX INTEGER (1..2147483647) + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "An arbitrary integer to differentiate multiple rows + containing different ATM addresses for the same service + on the same port." + ::= { atmfSrvcRegEntry 4 } + +atmfSrvcRegParm1 OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (1..255)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "An octet string whose size and meaning is determined + by the value of atmfSrvcRegServiceID." + ::= { atmfSrvcRegEntry 5 } +END + + |