Initial commitHEADmain

1 files changed, 288 insertions, 0 deletions

diff --git a/MIBS/ATM-FORUM-ADDR-REG b/MIBS/ATM-FORUM-ADDR-REG
new file mode 100644
index 0000000..b1667db
--- /dev/null
+++ b/MIBS/ATM-FORUM-ADDR-REG
@@ -0,0 +1,288 @@
+--------------------------------------------------------------------
+-- ATM Address Registration MIB
+--
+-- March, 1995; Kartik Chandrasekhar
+--
+-- Copyright (c) 1995-1997 by cisco Systems, Inc.
+-- All rights reserved.
+-- *****************************************************************
+--
+
+
+
+ATM-FORUM-ADDR-REG  DEFINITIONS ::=  BEGIN
+
+IMPORTS
+        atmfNetPrefixGroup,
+        atmfAddressGroup,
+        atmfAddressRegistrationAdminGroup,
+        AtmAddress,
+        NetPrefix                       FROM ATM-FORUM-TC-MIB
+        OBJECT-TYPE                     FROM RFC-1212;
+
+
+
+--                  The NetPrefix Group
+--
+-- The Network Prefix Table is implemented by the user-side IME.
+
+atmfNetPrefixTable OBJECT-TYPE
+        SYNTAX  SEQUENCE OF AtmfNetPrefixEntry
+        ACCESS  not-accessible
+        STATUS  mandatory
+        DESCRIPTION
+                "A table implemented by the user-side IME, containing the
+                network-prefix(es) for ATM-layer addresses in effect on
+                the user side of the UNI."
+        ::= { atmfNetPrefixGroup 1 }
+
+atmfNetPrefixEntry OBJECT-TYPE
+        SYNTAX  AtmfNetPrefixEntry
+        ACCESS  not-accessible
+        STATUS  mandatory
+        DESCRIPTION
+                "Information about a single network-prefix for
+                ATM-layer addresses in effect on the user-side IME.
+                Note that the index variable atmNetPrefixPrefix is a
+                variable-length string, and as such the rule for
+                variable-length strings in section 4.1.6 of RFC 1212
+                applies."
+
+        INDEX   { atmfNetPrefixPort, atmfNetPrefixPrefix }
+        ::= { atmfNetPrefixTable 1 }
+
+AtmfNetPrefixEntry ::=
+        SEQUENCE {
+                atmfNetPrefixPort
+                        INTEGER,
+                atmfNetPrefixPrefix
+                        NetPrefix,
+                atmfNetPrefixStatus
+                        INTEGER
+        }
+
+atmfNetPrefixPort OBJECT-TYPE
+        SYNTAX  INTEGER (0..2147483647)
+	ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "A unique value which identifies the UNI port for
+                which the network prefix for ATM addresses is in
+                effect.  The value of 0 has the special meaning of
+                identifying the local UNI."
+        ::= { atmfNetPrefixEntry 1 }
+
+atmfNetPrefixPrefix  OBJECT-TYPE
+        SYNTAX  NetPrefix
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The network prefix for ATM addresses which is in
+                effect on the user side of the ATM UNI port."
+        ::= { atmfNetPrefixEntry 2 }
+
+atmfNetPrefixStatus  OBJECT-TYPE
+        SYNTAX  INTEGER { valid(1), invalid(2) }
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "An indication of the validity of the network prefix
+                for ATM addresses on the user side of the UNI port.
+                To configure a new network prefix in this table, the
+                network-side IME must set the appropriate instance of this
+                object to the value valid(1).  To delete an existing
+                network prefix in this table, the network-side IME must
+                set the appropriate instance of this object to the
+                value invalid(2).
+
+                If circumstances occur on the user-side IME which cause a
+                prefix to become invalid, the user-side IME modifies the
+                value of the appropriate instance of this object to invalid(2).
+
+                Whenever the value of this object for a particular
+                prefix becomes invalid(2), the conceptual row for that
+                prefix may be removed from the table at any time,
+                either immediately or subsequently."
+        ::= { atmfNetPrefixEntry 3 }
+
+
+--                     The Address Group
+--
+-- The Address Table is implemented by the network-side IME.
+
+atmfAddressTable OBJECT-TYPE
+        SYNTAX  SEQUENCE OF AtmfAddressEntry
+        ACCESS  not-accessible
+        STATUS  mandatory
+        DESCRIPTION
+                "A table implemented by the network-side IME, containing the
+                ATM-layer addresses in effect on the user side of the UNI."
+        ::= { atmfAddressGroup 1 }
+
+atmfAddressEntry OBJECT-TYPE
+        SYNTAX  AtmfAddressEntry
+        ACCESS  not-accessible
+        STATUS  mandatory
+        DESCRIPTION
+                "Information about a single ATM-layer address in effect
+                on the user-side IME.  Note that the index variable
+                atmAddressAtmAddress is a variable-length string, and as
+                such the rule for variable-length strings in section
+                4.1.6 of RFC 1212 applies."
+        INDEX   { atmfAddressPort, atmfAddressAtmAddress }
+        ::= { atmfAddressTable 1 }
+
+AtmfAddressEntry ::=
+        SEQUENCE {
+                atmfAddressPort
+                        INTEGER,
+                atmfAddressAtmAddress
+                        AtmAddress,
+                atmfAddressStatus
+                        INTEGER,
+                atmfAddressOrgScope
+                        INTEGER
+        }
+
+atmfAddressPort OBJECT-TYPE
+        SYNTAX  INTEGER (0..2147483647)
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "A unique value which identifies the UNI port for
+                which the ATM address is in effect.  The value of 0
+                has the special meaning of identifying the local UNI."
+        ::= { atmfAddressEntry 1 }
+
+atmfAddressAtmAddress  OBJECT-TYPE
+        SYNTAX  AtmAddress
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The ATM address which is in effect on the user side
+                of the ATM UNI port."
+        ::= { atmfAddressEntry 2 }
+
+atmfAddressStatus  OBJECT-TYPE
+        SYNTAX  INTEGER { valid(1), invalid(2) }
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "An indication of the validity of the ATM address at
+                the user side of the UNI port.  To configure a new
+                address in this table, the user-side IME must set the
+                appropriate instance of this object to the value
+                valid(1).  To delete an existing address in this table,
+                the user-side IME must set the appropriate instance of
+                this object to the value invalid(2).
+
+                If circumstances occur on the network-side IME which cause
+                an address to become invalid, the network-side IME
+                modifies the value of the appropriate instance of this
+                object to invalid(2).
+
+                Whenever the value of this object for a particular
+                address becomes invalid(2), the conceptual row for
+                that address may be removed from the table at any
+                time, either immediately or subsequently."
+        ::= { atmfAddressEntry 3 }
+
+atmfAddressOrgScope OBJECT-TYPE
+        SYNTAX  INTEGER {
+                localNetwork(1),
+                localNetworkPlusOne(2),
+                localNetworkPlusTwo(3),
+                siteMinusOne(4),
+                intraSite(5), 
+                sitePlusOne(6),
+                organizationMinusOne(7),
+                intraOrganization(8),
+                organizationPlusOne(9),
+                communityMinusOne(10),
+                intraCommunity(11),
+                communityPlusOne(12),
+                regional(13),
+                interRegional(14),
+                global(15)
+        }
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION 
+                "This object indicates the organizational
+                scope for the referenced address. The information of
+                the referenced address shall not be distributed
+                outside the indicated scope. If the user-side IME does
+                not specify a value for the atmfAddressOrgScope object,
+                the network shall set the value of this object to
+                localNetwork(1), if the registered address is an ATM group
+                address, or to global(15), if the registered address is 
+                an individual address.  Refer to Annex 6.0
+                of ATM Forum UNI Signalling 4.0 for guidelines regarding
+                the use of organizational scopes.
+
+                This organization hierarchy may be mapped to ATM network's
+                routing hierarchy such as PNNI's routing level and
+                the mapping shall be configurable in
+                nodes. Use of this object in a public network is for
+                further study.
+                The default values for organizational scope are
+                localNetwork(1) for ATM group addresses, and global(15)
+                for individual addresses."
+        ::= { atmfAddressEntry 4 }
+
+
+--                     The Address Registration Admin Group
+--
+-- The Address Registration Admin Table is mandatory for all IMEs.
+
+atmfAddressRegistrationAdminTable OBJECT-TYPE
+        SYNTAX  SEQUENCE OF AtmfAddressRegistrationAdminEntry
+        ACCESS  not-accessible
+        STATUS  mandatory
+        DESCRIPTION
+                "A table of Address Registration administrative
+                information for the ATM Interface."
+    ::= { atmfAddressRegistrationAdminGroup 1 }
+
+atmfAddressRegistrationAdminEntry OBJECT-TYPE
+        SYNTAX  AtmfAddressRegistrationAdminEntry
+        ACCESS  not-accessible
+        STATUS  mandatory
+        DESCRIPTION
+                "An entry in the table, containing Address
+                Registration administrative information for the ATM
+                Interface."
+        INDEX   { atmfAddressRegistrationAdminIndex }
+        ::= { atmfAddressRegistrationAdminTable 1 }
+
+
+AtmfAddressRegistrationAdminEntry ::=
+        SEQUENCE {
+                atmfAddressRegistrationAdminIndex
+                        INTEGER,
+                atmfAddressRegistrationAdminStatus
+                        INTEGER
+        }
+
+atmfAddressRegistrationAdminIndex OBJECT-TYPE
+        SYNTAX  INTEGER (0..2147483647)
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The value of 0 which has the special meaning of
+                identifying the ATM Interface over which this message
+                was received."
+        ::= { atmfAddressRegistrationAdminEntry 1 }
+
+atmfAddressRegistrationAdminStatus OBJECT-TYPE
+        SYNTAX  INTEGER { supported(1), unsupported(2) }
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "An indication of whether or not Address Registration
+                is supported on this ATM Interface. Supported(1)
+                indicates that this ATM Interface supports address
+                registration. Unsupported(2) indicates that this ATM
+                Interface does not support address registration."
+        ::= { atmfAddressRegistrationAdminEntry 2 }
+END