From 98a672123c7872f6b9b75a9a2b6bb3aea504de6a Mon Sep 17 00:00:00 2001 From: David Leutgeb Date: Tue, 5 Dec 2023 12:25:34 +0100 Subject: Initial commit --- MIBS/ubiquoss/UBQS-ERPS-MIB | 804 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 804 insertions(+) create mode 100644 MIBS/ubiquoss/UBQS-ERPS-MIB (limited to 'MIBS/ubiquoss/UBQS-ERPS-MIB') diff --git a/MIBS/ubiquoss/UBQS-ERPS-MIB b/MIBS/ubiquoss/UBQS-ERPS-MIB new file mode 100644 index 0000000..9d88f5b --- /dev/null +++ b/MIBS/ubiquoss/UBQS-ERPS-MIB @@ -0,0 +1,804 @@ +-- ***************************************************************** +-- UBQS-ERPS-MIB: Ubiquoss ERPS MIB +-- +-- Nov 2010, Park Hyung Eun +-- +-- Copyright (c) 2010 by Ubiquoss, Corp. +-- All rights reserved. +-- ***************************************************************** +-- + +UBQS-ERPS-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, + OBJECT-TYPE, + NOTIFICATION-TYPE, + Counter32, + IpAddress, + Gauge32, + Integer32, + Unsigned32 + FROM SNMPv2-SMI + MODULE-COMPLIANCE, + OBJECT-GROUP, + NOTIFICATION-GROUP + FROM SNMPv2-CONF + TEXTUAL-CONVENTION, + RowStatus, + DisplayString, + TruthValue, + FROM SNMPv2-TC + ifIndex, + FROM IF-MIB + VlanIndex, + FROM Q-BRIDGE-MIB + ubiSysMacAddr, + FROM UBQS-SYSTEM-MIB + Dot1agCfmMaintDomainName, + Dot1agCfmMaintAssocName, + FROM UBQS-CFM-MIB + UbiBridgeId, + FROM UBQS-TC + ubiMgmtv2 + FROM UBQS-SMI; + + +ubiErpsMIB MODULE-IDENTITY + LAST-UPDATED "201011290000Z" + ORGANIZATION "Ubiquoss Corp." + CONTACT-INFO + " Ubiquoss + Customer Service + + Postal: 24F Milennium B/D, + 467-12, Dogok-Dong, + GangNam-Gu, Seoul 135-270 + Korea + + Tel: 82-2-2190-3100" + DESCRIPTION + "" + ::= { ubiMgmtv2 11 } + + + +-- ***************************************************************** +-- Textual Conventions +-- ***************************************************************** + + +-- ***************************************************************** +-- ubiERPSMIB +-- ***************************************************************** +ubiErpsMIBNotificationPrefix OBJECT IDENTIFIER ::= { ubiErpsMIB 0 } +ubiErpsMIBObjects OBJECT IDENTIFIER ::= { ubiErpsMIB 1 } +ubiErpsMIBConformance OBJECT IDENTIFIER ::= { ubiErpsMIB 2 } + + +ubiErpsGlobal OBJECT IDENTIFIER ::= { ubiErpsMIBObjects 4 } +ubiErpsNotificationEnables OBJECT IDENTIFIER ::= { ubiErpsMIBObjects 5 } + + +-- ***************************************************************** +-- ubiCfmNotifications +-- ***************************************************************** +ubiErpsMIBNotifications OBJECT IDENTIFIER ::= { ubiErpsMIBNotificationPrefix 0 } + + ubiErpsRingStateChange NOTIFICATION-TYPE + OBJECTS { + ubiSysMacAddr, + ubiErpsSwitchBridgeId, + ubiErpsSwitchRingId, + ubiErpsSwitchCurrentState, + ubiErpsSwitchEastIf, + ubiErpsSwitchEastIfState, + ubiErpsSwitchWestIf, + ubiErpsSwitchWestIfState, + } + STATUS current + DESCRIPTION + "Notification of ERPS State Change." + ::= { ubiErpsMIBNotifications 1 } + + ubiErpsRingEastIfStateChange NOTIFICATION-TYPE + OBJECTS { + ubiSysMacAddr, + ubiErpsSwitchBridgeId, + ubiErpsSwitchRingId, + ubiErpsSwitchEastIf, + ubiErpsSwitchEastIfState + } + STATUS current + DESCRIPTION + "Notification of East Ring Port State Change." + ::= { ubiErpsMIBNotifications 2 } + + ubiErpsRingWestIfStateChange NOTIFICATION-TYPE + OBJECTS { + ubiSystemMacAddr, + ubiErpsSwitchBridgeId, + ubiErpsSwitchRingId, + ubiErpsSwitchWestIf, + ubiErpsSwitchWestIfState + } + STATUS current + DESCRIPTION + "Notification of West Ring Port State Change." + ::= { ubiErpsMIBNotifications 3 } + + +-- ***************************************************************** +-- ubiErpsBaseTable +-- ***************************************************************** + + ubiErpsBaseTable OBJECT-TYPE + SYNTAX SEQUENCE OF UbiErpsBaseEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The table of ERPS Base information." + ::= { ubiErpsMIBObjects 1 } + + ubiErpsBaseEntry OBJECT-TYPE + SYNTAX UbiErpsBaseEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The entry of ERPS Base information." + INDEX { ubiErpsBaseBridgeId, ubiErpsBaseRingId, + ubiErpsBaseEastIf, ubiErpsBaseWestIf, + ubiErpsBaseInstId } + ::= { ubiErpsBaseTable 1 } + + + UbiErpsBaseEntry ::= SEQUENCE { + ubiErpsBaseBridgeId UbiBridgeId, + ubiErpsBaseRingId Integer32, + ubiErpsBaseEastIf Integer32, + ubiErpsBaseWestIf Integer32, + ubiErpsBaseInstId Integer32, + ubiErpsBaseRowStatus RowStatus + } + + ubiErpsBaseBridgeId OBJECT-TYPE + SYNTAX UbiBridgeId + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "ERPS Base Bridge ID." + ::= { ubiErpsBaseEntry 1 } + + ubiErpsBaseRingId OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "ERPS Base Ring ID." + ::= { ubiErpsBaseEntry 2 } + + ubiErpsBaseEastIf OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "ERPS Base East Ring port." + ::= { ubiErpsBaseEntry 3 } + + ubiErpsBaseWestIf OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "ERPS Base West Ring port." + ::= { ubiErpsBaseEntry 4 } + + ubiErpsBaseInstId OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "ERPS Base Instance ID." + ::= { ubiErpsBaseEntry 5 } + + ubiErpsBaseRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The status of the row." + ::= { ubiErpsBaseEntry 6 } + + +-- ***************************************************************** +-- ubiErpsVlanTable +-- ***************************************************************** + + ubiErpsVlanTable OBJECT-TYPE + SYNTAX SEQUENCE OF UbiErpsVlanEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The table of ERPS Vlan information." + ::= { ubiErpsMIBObjects 2 } + + ubiErpsVlanEntry OBJECT-TYPE + SYNTAX UbiErpsVlanEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The entry of ERPS Vlan information." + INDEX { ubiErpsBaseBridgeId, ubiErpsBaseRingId, + ubiErpsVlanVlanId, ubiErpsVlanServiceVlan } + ::= { ubiErpsVlanTable 1 } + + + UbiErpsVlanEntry ::= SEQUENCE { + ubiErpsVlanVlanId VlanIndex, + ubiErpsVlanServiceVlanType INTEGER, + ubiErpsVlanRowStatus RowStatus + } + + ubiErpsVlanVlanId OBJECT-TYPE + SYNTAX VlanIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Vlan ID." + ::= { ubiErpsVlanEntry 1 } + + ubiErpsVlanServiceVlanType OBJECT-TYPE + SYNTAX INTEGER { + service_vlan(1), + protected_vlan(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "ERPS Vlan Type. + service_vlan(1) - Control Vlan + protected_vlan(2) - Service Valn" + ::= { ubiErpsVlanEntry 2 } + + ubiErpsVlanRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The status of the row." + ::= { ubiErpsVlanEntry 3 } + + + +-- ***************************************************************** +-- ubiErpsSwitchTable +-- ***************************************************************** + + ubiErpsSwitchTable OBJECT-TYPE + SYNTAX SEQUENCE OF UbiErpsSwitchEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The table of ERPS Switch information." + ::= { ubiErpsMIBObjects 3 } + + ubiErpsSwitchEntry OBJECT-TYPE + SYNTAX UbiErpsSwitchEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The entry of ERPS Switch information." + INDEX { ubiErpsSwitchBridgeId, ubiErpsSwitchRingId } + ::= { ubiErpsSwitchTable 1 } + + + UbiErpsSwitchEntry ::= SEQUENCE { + ubiErpsSwitchBridgeId UbiBridgeId, + ubiErpsSwitchRingId Integer32, + ubiErpsSwitchVersion INTEGER, + ubiErpsSwitchNodeType INTEGER, + ubiErpsSwitchEastIf Integer32, + ubiErpsSwitchWestIf Integer32, + ubiErpsSwitchEastIfState INTEGER, + ubiErpsSwitchWestIfState INTEGER, + ubiErpsSwitchRingProtectionLink INTEGER, + ubiErpsSwitchRevertiveMode TruthValue, + ubiErpsSwitchMegLevel Integer32, + ubiErpsSwitchPropagateTc TruthValue, + ubiErpsSwitchGuardTimer Integer32, + ubiErpsSwitchHoldOff Integer32, + ubiErpsSwitchWaitToRestore Integer32, + ubiErpsSwitchWaitToBlock Integer32, + ubiErpsSwitchMajorRingId Integer32, + ubiErpsSwitchEthoamEvent TruthValue, + ubiErpsSwitchForcedSwitch INTEGER, + ubiErpsSwitchManualSwitch INTEGER, + ubiErpsSwitchClear INTEGER, + ubiErpsSwitchCurrentState INTEGER, + ubiErpsSwitchLastEvent INTEGER, + ubiErpsSwitchSuppressEast TruthValue, + ubiErpsSwitchSuppressWest TruthValue, + ubiErpsSwitchCotNode TruthValue, + ubiErpsSwitchCotNbrPort INTEGER, + ubiErpsSwitchMdName Dot1agCfmMaintDomainName, + ubiErpsSwitchMaName Dot1agCfmMaintAssocName + } + + ubiErpsSwitchBridgeId OBJECT-TYPE + SYNTAX UbiBridgeId + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Bridge ID ERPS is running." + ::= { ubiErpsSwitchEntry 1 } + + ubiErpsSwitchRingId OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "G8032 ERPS Ring ID." + ::= { ubiErpsSwitchEntry 2 } + + ubiErpsSwitchVersion OBJECT-TYPE + SYNTAX INTEGER (1 | 2) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "G8032 ERPS Version. + 1 - Version 1 + 2 - Version 2" + ::= { ubiErpsSwitchEntry 3 } + + ubiErpsSwitchNodeType OBJECT-TYPE + SYNTAX INTEGER { + ring_none(1), + rpl_owner(2), + rpl_neighbor(3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "G8032 ERPS Node Type. + ring_none(1) - non-RPL Owner + rpl_owner(2) - RPL Owner + rpl_neigbor(3) - RPL Neighober" + ::= { ubiErpsSwitchEntry 4 } + + + ubiErpsSwitchEastIf OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "East Ring port of ERPS." + ::= { ubiErpsSwitchEntry 5 } + + + ubiErpsSwitchWestIf OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "West Ring port of ERPS." + ::= { ubiErpsSwitchEntry 6 } + + + ubiErpsSwitchEastIfState OBJECT-TYPE + SYNTAX INTEGER { + down(1), + block(2), + forward(3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Port status of east ring port." + ::= { ubiErpsSwitchEntry 7 } + + + ubiErpsSwitchWestIfState OBJECT-TYPE + SYNTAX INTEGER { + down(1), + block(2), + forward(3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Port status of west ring port." + ::= { ubiErpsSwitchEntry 8 } + + + ubiErpsSwitchRingProtectionLink OBJECT-TYPE + SYNTAX INTEGER { + none(1), + east(2), + west(3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Indication of Ring protection link(RPL). + none(1) - non-RPL + east(2) - East port is RPL + wast(3) - West port is RPL" + ::= { ubiErpsSwitchEntry 9 } + + ubiErpsSwitchRevertiveMode OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "G8032 ERPS Switch Mode. + - If this is configured, it is revertive mode, + is not, it is non-revertive mode." + ::= { ubiErpsSwitchEntry 10 } + + ubiErpsSwitchMegLevel OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "G8032 ERPS MEG Level." + ::= { ubiErpsSwitchEntry 11 } + + ubiErpsSwitchPropagateTc OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "If this is configured, when sub-ring topolgy is changed, + sub-ring transmits Topology Change Message to major-ring." + ::= { ubiErpsSwitchEntry 12 } + + ubiErpsSwitchGuardTimer OBJECT-TYPE + SYNTAX Integer32 + UNITS "milliseconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Guard Timer value." + ::= { ubiErpsSwitchEntry 13 } + + ubiErpsSwitchHoldOff OBJECT-TYPE + SYNTAX Integer32 + UNITS "milliseconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Hold-off Timer value." + ::= { ubiErpsSwitchEntry 14 } + + ubiErpsSwitchWaitToRestore OBJECT-TYPE + SYNTAX Integer32 + UNITS "minutes" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Wait to Restore Timer value." + ::= { ubiErpsSwitchEntry 15 } + + ubiErpsSwitchWaitToBlock OBJECT-TYPE + SYNTAX Integer32 + UNITS "seconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Waith to Block Timer value." + ::= { ubiErpsSwitchEntry 16 } + + ubiErpsSwitchMajorRingId OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Major-ring ID who is inter operated." + ::= { ubiErpsSwitchEntry 17 } + + ubiErpsSwitchEthoamEvent OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enable interopering with CFM CCM." + ::= { ubiErpsSwitchEntry 18 } + + ubiErpsSwitchForcedSwitch OBJECT-TYPE + SYNTAX INTEGER { + none(1), + east(2), + west(3), + both(4) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Indication of Forced swith ring port. + none - none + east - east ring port + west - west ring port + both - both ring port" + ::= { ubiErpsSwitchEntry 19 } + + + ubiErpsSwitchManualSwitch OBJECT-TYPE + SYNTAX INTEGER { + none(1), + east(2), + west(3), + both(4) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Indication of Manual swith ring port. + none - none + east - east ring port + west - west ring port + both - both ring port" + ::= { ubiErpsSwitchEntry 20 } + + + ubiErpsSwitchClear OBJECT-TYPE + SYNTAX INTEGER { + none(1), + east(2), + west(3), + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Clear Forced/Manual swith." + ::= { ubiErpsSwitchEntry 21 } + + ubiErpsSwitchCurrentState OBJECT-TYPE + SYNTAX INTEGER + { + init(1), + idle(2), + protection(3), + manual_switch(4), + forced_switch(5), + pending(6) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Informaiont of ERPS current state. + init(1) + - Initialize State machine: One of ring ports is blocked. + idle(2) + - Idle state: RPL is blocked and ring ports of others are unblocked. + protection(3) + - Protection state: When links are failed, + RPL is unblocked and ring ports of others are unblocked. + manual_switch(4) + - Manual switch state: Manually switched port is blocked + and ring ports of others are unblocked. + forced_switch(5) + - Force switch state: Forcedly switched ports are blocked + and ring ports of others are unblocked. + pending(6) + - Pneding state: When status of links changed to 'unfailed', + one of them is still unblocked." + ::= { ubiErpsSwitchEntry 22 } + + + ubiErpsSwitchLastEvent OBJECT-TYPE + SYNTAX INTEGER { + r_aps_nr(1), + r_aps_nr_rb(2), + r_aps_wtb_running(3), + wtb_expires(4), + r_aps_wtr_running(5), + wtr_expires(6), + ms(7), + r_aps_ms(8), + clear(9), + l_clear_sf(10), + l_sf(11), + r_aps_sf(12), + fs(13), + r_aps_fs(14), + event_flush_req(15) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Last Event of ERPS. + r_aps_nr(1) - received R-APS(NR) + r_aps_nr_rb(2) - received R-APS(NR/RB) + r_aps_wtb_running(3) - WTB is started + wtb_espires(4) - WTB is expired + r_aps_wtr_running(5) - WTR is started + wtr_expires(6) - WTR is expired + ms(7) - Manual switched + r_aps_ms(8) - rceived R-APS(MS) + clear(9) - Clear Pending/MS/FS state + l_clear_sf(10) - Local clear SF + l_sf(11) - Local SF + r_aps_sf(12) - received R-APS(SF) + fs(13) - Forced switch + r_aps_fs(14) - rceived R-APS(FS) + event_flush_req(15) - rceived R-APS(Flush request)" + ::= { ubiErpsSwitchEntry 23 } + + ubiErpsSwitchSuppressEast OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Suppress trasmission R-APS to east ring port." + ::= { ubiErpsSwitchEntry 24 } + + ubiErpsSwitchSuppressWest OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "uppress trasmission R-APS to west ring port" + ::= { ubiErpsSwitchEntry 25 } + + ubiErpsSwitchCotNode OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Indication of COT node." + ::= { ubiErpsSwitchEntry 26 } + + ubiErpsSwitchCotNbrPort OBJECT-TYPE + SYNTAX INTEGER { + none(1), + east(2), + west(3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Indication of COT neighbor port. + none(1) - none + east(2) - east ring port + west(3) - west ring port" + ::= { ubiErpsSwitchEntry 27 } + + + ubiErpsSwitchMdName OBJECT-TYPE + SYNTAX Dot1agCfmMaintDomainName + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "CFM Maintenance Domain Name for inter operation." + ::= { ubiErpsSwitchEntry 28 } + + + ubiErpsSwitchMaName OBJECT-TYPE + SYNTAX Dot1agCfmMaintAssocName + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "CFM Maintenance association Name for inter operation." + ::= { ubiErpsSwitchEntry 29 } + + +-- ***************************************************************** +-- ubiErpsGlobal +-- ***************************************************************** + + ubiErpsGlobalHoldOff OBJECT-TYPE + SYNTAX Integer32 + UNITS "milliseconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Global hold-off timer value." + ::= { ubiErpsGlobal 1 } + + + +-- ***************************************************************** +-- ubiErpsNotificationEnables +-- ***************************************************************** + + ubiErpsRingStateChangeEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enable Notificaion of ERPS State Change." + ::= { ubiErpsNotificationEnables 1 } + + ubiErpsRingEastIfStateChangeEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enable Notificaiont of East Port Status Change." + ::= { ubiErpsNotificationEnables 2 } + + ubiErpsRingWestIfStateChangeEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enable Notificaiont of East Port Status Change." + ::= { ubiErpsNotificationEnables 3 } + + + +-- *********************************************************** +-- ubiIfErpsTable +-- *********************************************************** + + ubiIfErpsTable OBJECT-TYPE + SYNTAX SEQUENCE OF UbiIfErpsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The table of ERPS information on interface." + ::= { ubiErpsMIBObjects 6 } + + + ubiIfErpsEntry OBJECT-TYPE + SYNTAX UbiIfErpsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The entry of ERPS information on interface." + INDEX { ifIndex } + ::= { ubiIfErpsTable 1 } + + + UbiIfErpsEntry ::= SEQUENCE + { + ubiIfErpsAggMinLink Integer32 + } + + ubiIfErpsAggMinLink OBJECT-TYPE + SYNTAX Integer32 (1..8) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Minmum Link count to activate Port-channel in ERPS. + - To activate Port-channel, actived members of port-channel + must be minmum link count at least." + ::= { ubiIfErpsEntry 1 } + + + +-- ***************************************************************** +-- ubiErpsMIBConformance +-- ***************************************************************** + +-- Conformance Information +ubiErpsMIBCompliances OBJECT IDENTIFIER ::= { ubiErpsMIBConformance 1 } +ubiErpsMIBGroups OBJECT IDENTIFIER ::= { ubiErpsMIBConformance 2 } + + +-- compliance statements + + ubiErpsMIBCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement for VTP implementations." + MODULE -- this module + MANDATORY-GROUPS { + ubiErpsBaseGroup + } + ::= { ubiErpsMIBCompliances 1 } + +-- units of conformance + + ubiErpsBaseGroup OBJECT-GROUP + OBJECTS { + } + STATUS current + DESCRIPTION + "" + ::= { ubiErpsMIBGroups 1 } +END + + + + -- cgit v1.2.3