From 98a672123c7872f6b9b75a9a2b6bb3aea504de6a Mon Sep 17 00:00:00 2001 From: David Leutgeb Date: Tue, 5 Dec 2023 12:25:34 +0100 Subject: Initial commit --- MIBS/tplink/TPLINK-DDMBIASCURTHRESHOLD-MIB | 99 ++++++++++++++++++++++++++++++ 1 file changed, 99 insertions(+) create mode 100644 MIBS/tplink/TPLINK-DDMBIASCURTHRESHOLD-MIB (limited to 'MIBS/tplink/TPLINK-DDMBIASCURTHRESHOLD-MIB') diff --git a/MIBS/tplink/TPLINK-DDMBIASCURTHRESHOLD-MIB b/MIBS/tplink/TPLINK-DDMBIASCURTHRESHOLD-MIB new file mode 100644 index 0000000..1486c58 --- /dev/null +++ b/MIBS/tplink/TPLINK-DDMBIASCURTHRESHOLD-MIB @@ -0,0 +1,99 @@ + TPLINK-DDMBIASCURTHRESHOLD-MIB DEFINITIONS ::= BEGIN + + IMPORTS + MODULE-IDENTITY, OBJECT-TYPE + FROM SNMPv2-SMI + ifIndex + FROM RFC1213-MIB + DisplayString + FROM SNMPv2-TC + tplinkDdmManageMIBObjects + FROM TPLINK-DDMMANAGE-MIB; + + ddmBiasCurThreshold MODULE-IDENTITY + LAST-UPDATED "200908270000Z" + ORGANIZATION "TPLINK" + CONTACT-INFO "www.tplink.com" + DESCRIPTION "The config of DDM bias current threshold." + REVISION "200908270000Z" + DESCRIPTION "Initial version of this MIB module." + ::= { tplinkDdmManageMIBObjects 4 } + + ddmBiasCurThresholdTable OBJECT-TYPE + SYNTAX SEQUENCE OF DDMBiasCurThresholdEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that is used to configure the DDM Bias Current Threshold for specific ports on the Switch." + ::= { ddmBiasCurThreshold 1 } + + ddmBiasCurThresholdEntry OBJECT-TYPE + SYNTAX DDMBiasCurThresholdEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of information for every port." + INDEX { ifIndex } + ::= { ddmBiasCurThresholdTable 1 } + + DDMBiasCurThresholdEntry ::= + SEQUENCE + { + ddmBiasCurThresholdPort DisplayString(SIZE(0..255)), + ddmBiasCurThresholdHighAlarm OCTET STRING(SIZE(0..30)), + ddmBiasCurThresholdLowAlarm OCTET STRING(SIZE(0..30)), + ddmBiasCurThresholdHighWarn OCTET STRING(SIZE(0..30)), + ddmBiasCurThresholdLowWarn OCTET STRING(SIZE(0..30)), + ddmBiasCurThresholdPortLAG OCTET STRING(SIZE(0..30)) + } + + ddmBiasCurThresholdPort OBJECT-TYPE + SYNTAX DisplayString(SIZE(0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object indicates the port number." + ::= { ddmBiasCurThresholdEntry 1 } + + ddmBiasCurThresholdHighAlarm OBJECT-TYPE + SYNTAX OCTET STRING(SIZE(0..30)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object indicates the highest threshold for the alarm." + ::= { ddmBiasCurThresholdEntry 2 } + + ddmBiasCurThresholdLowAlarm OBJECT-TYPE + SYNTAX OCTET STRING(SIZE(0..30)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object indicates the lowest threshold for the alarm." + ::= { ddmBiasCurThresholdEntry 3 } + + ddmBiasCurThresholdHighWarn OBJECT-TYPE + SYNTAX OCTET STRING(SIZE(0..30)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object indicates the highest threshold for the warning." + ::= { ddmBiasCurThresholdEntry 4 } + + ddmBiasCurThresholdLowWarn OBJECT-TYPE + SYNTAX OCTET STRING(SIZE(0..30)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object indicates the lowest threshold for the warning." + ::= { ddmBiasCurThresholdEntry 5 } + + ddmBiasCurThresholdPortLAG OBJECT-TYPE + SYNTAX OCTET STRING(SIZE(0..30)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object indicates the lag number of the port." + ::= { ddmBiasCurThresholdEntry 6 } + +END + \ No newline at end of file -- cgit v1.2.3