From 98a672123c7872f6b9b75a9a2b6bb3aea504de6a Mon Sep 17 00:00:00 2001 From: David Leutgeb Date: Tue, 5 Dec 2023 12:25:34 +0100 Subject: Initial commit --- MIBS/screenos/NETSCREEN-VPN-IKE-MIB | 190 ++++++++++++++++++++++++++++++++++++ 1 file changed, 190 insertions(+) create mode 100644 MIBS/screenos/NETSCREEN-VPN-IKE-MIB (limited to 'MIBS/screenos/NETSCREEN-VPN-IKE-MIB') diff --git a/MIBS/screenos/NETSCREEN-VPN-IKE-MIB b/MIBS/screenos/NETSCREEN-VPN-IKE-MIB new file mode 100644 index 0000000..fb8851a --- /dev/null +++ b/MIBS/screenos/NETSCREEN-VPN-IKE-MIB @@ -0,0 +1,190 @@ +-- This module defines enterprise MIBs for VPN IKE info +-- +-- Copyright (c) 1999-2004, Juniper Networks, Inc. +-- All rights reserved. + +NETSCREEN-VPN-IKE-MIB DEFINITIONS ::= BEGIN + +IMPORTS + netscreenVpn, netscreenVpnMibModule + FROM NETSCREEN-SMI + Integer32, MODULE-IDENTITY, OBJECT-TYPE + FROM SNMPv2-SMI + DisplayString + FROM SNMPv2-TC + ; + +netscreenVpnIkeMibModule MODULE-IDENTITY + LAST-UPDATED "200405032022Z" -- May 03, 2004 + ORGANIZATION + "Juniper Networks, Inc." + CONTACT-INFO + "Customer Support + + 1194 North Mathilda Avenue + Sunnyvale, California 94089-1206 + USA + + Tel: 1-800-638-8296 + E-mail: customerservice@juniper.net + HTTP://www.juniper.net" + DESCRIPTION + "This module defines the object that are used to monitor + VPN IKE info" + REVISION "200405030000Z" -- May 03, 2004 + DESCRIPTION + "Modified copyright and contact information" + REVISION "200403030000Z" -- March 03, 2004 + DESCRIPTION + "Converted to SMIv2 by Longview Software" + REVISION "200311130000Z" -- November 13, 2003 + DESCRIPTION + "Correct spelling mistake" + REVISION "200109280000Z" -- September 28, 2001 + DESCRIPTION + "No comment" + REVISION "200105140000Z" -- May 14, 2001 + DESCRIPTION + "Creation Date" + ::= { netscreenVpnMibModule 3 } + +NsVpnIkeEntry ::= SEQUENCE +{ + nsVpnIkeIndex Integer32, + nsVpnIkeName DisplayString, + nsVpnIkeReplayProc INTEGER, + nsVpnIkeGWTun DisplayString, + nsVpnIkePh2ProOne DisplayString, + nsVpnIkePh2ProTwo DisplayString, + nsVpnIkePh2ProThree DisplayString, + nsVpnIkePh2ProFour DisplayString, + nsVpnIkeMonitorEnable INTEGER, + nsVpnIkeTransMode INTEGER, + nsVpnIkeVsys Integer32 +} + +nsVpnIke OBJECT IDENTIFIER ::= { netscreenVpn 3 } + +nsVpnIkeTable OBJECT-TYPE + SYNTAX SEQUENCE OF NsVpnIkeEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "IPSec supports the automated generation and negotiation of + keys and security associations using the Internet Key + Exchange(IKE) protocol. This table collects the IKE + configuration in NetScreen device." + ::= { nsVpnIke 1 } + +nsVpnIkeEntry OBJECT-TYPE + SYNTAX NsVpnIkeEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry in the nsVpnIkeTable holds a set of configuration + parameters associated with an IKE." + INDEX + { nsVpnIkeIndex } + ::= { nsVpnIkeTable 1 } + +nsVpnIkeIndex OBJECT-TYPE + SYNTAX Integer32 (0..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A unique value for ike table. Its value ranges between 0 and + 65535 and may not be contiguous." + ::= { nsVpnIkeEntry 1 } + +nsVpnIkeName OBJECT-TYPE + SYNTAX DisplayString (SIZE(0..32)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Each IKE configuration can have a readable name." + ::= { nsVpnIkeEntry 2 } + +nsVpnIkeReplayProc OBJECT-TYPE + SYNTAX INTEGER { + disable(0), + enabled(1) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Enable Replay Protection" + ::= { nsVpnIkeEntry 3 } + +nsVpnIkeGWTun OBJECT-TYPE + SYNTAX DisplayString (SIZE(0..32)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Remote Gateway Tunnel Name" + ::= { nsVpnIkeEntry 4 } + +nsVpnIkePh2ProOne OBJECT-TYPE + SYNTAX DisplayString (SIZE(0..32)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Phase 2 Proposal one" + ::= { nsVpnIkeEntry 5 } + +nsVpnIkePh2ProTwo OBJECT-TYPE + SYNTAX DisplayString (SIZE(0..32)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Phase 2 Proposal two" + ::= { nsVpnIkeEntry 6 } + +nsVpnIkePh2ProThree OBJECT-TYPE + SYNTAX DisplayString (SIZE(0..32)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Phase 2 Proposal three" + ::= { nsVpnIkeEntry 7 } + +nsVpnIkePh2ProFour OBJECT-TYPE + SYNTAX DisplayString (SIZE(0..32)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Phase 2 Proposal four" + ::= { nsVpnIkeEntry 8 } + +nsVpnIkeMonitorEnable OBJECT-TYPE + SYNTAX INTEGER { + disable(0), + enabled(1) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Enable to monitor VPN tunnel's link status." + ::= { nsVpnIkeEntry 9 } + +nsVpnIkeTransMode OBJECT-TYPE + SYNTAX INTEGER { + disable(0), + enabled(1) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Transport Mode Enable (For L2TP-over-IPSec only)" + ::= { nsVpnIkeEntry 10 } + +nsVpnIkeVsys OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "vsys the configuration belongs to." + ::= { nsVpnIkeEntry 11 } + +END + + -- cgit v1.2.3