From 98a672123c7872f6b9b75a9a2b6bb3aea504de6a Mon Sep 17 00:00:00 2001 From: David Leutgeb Date: Tue, 5 Dec 2023 12:25:34 +0100 Subject: Initial commit --- MIBS/riello/RIELLO-MIB | 34 + MIBS/riello/RIELLOMDU-MIB | 386 +++++++++++ MIBS/riello/RIELLOMTS-MIB | 592 ++++++++++++++++ MIBS/riello/RIELLOUPS-MIB | 1643 ++++++++++++++++++++++++++++++++++++++++++++ MIBS/riello/SENSORTRAP-MIB | 97 +++ 5 files changed, 2752 insertions(+) create mode 100644 MIBS/riello/RIELLO-MIB create mode 100644 MIBS/riello/RIELLOMDU-MIB create mode 100644 MIBS/riello/RIELLOMTS-MIB create mode 100644 MIBS/riello/RIELLOUPS-MIB create mode 100644 MIBS/riello/SENSORTRAP-MIB (limited to 'MIBS/riello') diff --git a/MIBS/riello/RIELLO-MIB b/MIBS/riello/RIELLO-MIB new file mode 100644 index 0000000..a4e3ed8 --- /dev/null +++ b/MIBS/riello/RIELLO-MIB @@ -0,0 +1,34 @@ +-- RPS S.p.A enterprise MIB definition + +-- Copyright (c) RPS S.p.A. +-- Version: 1.0 by Michele Marcon +-- Date: 1.04.2016 + +-- Title: RIELLO MIB + +-- ************************************************************************ +-- ************************************************************************ + +-- RIELLO-MIB { iso org(3) dod(6) internet(1) private(4) +-- enterprises(1) riello(5491) } + + + +RIELLO-MIB DEFINITIONS ::= BEGIN + +IMPORTS + enterprises, MODULE-IDENTITY FROM SNMPv2-SMI; + +rielloMIB MODULE-IDENTITY + LAST-UPDATED "201602230000Z" + ORGANIZATION "RPS S.p.A" + CONTACT-INFO + " Michele Marcon + E-mail: info@riello-ups.com" + DESCRIPTION + "The MIB module to describe Riello devices." + + REVISION "201602230000Z" + DESCRIPTION "Latest avaialble" ::= { enterprises 5491 } + +END diff --git a/MIBS/riello/RIELLOMDU-MIB b/MIBS/riello/RIELLOMDU-MIB new file mode 100644 index 0000000..c8e35fb --- /dev/null +++ b/MIBS/riello/RIELLOMDU-MIB @@ -0,0 +1,386 @@ +-- RPS S.p.A enterprise MIB definition + +-- Copyright (c) RPS S.p.A. +-- Version: 1.0 by Michele Marcon +-- Date: 1.04.2016 + +-- Title: RIELLOMDU-MIB + +-- MDU-MIB { iso org(3) dod(6) internet(1) private(4) +-- enterprises(1) riello(5491) } + +-- ************************************************************************ +-- ************************************************************************ + +RIELLOMDU-MIB DEFINITIONS ::= BEGIN + +IMPORTS + DisplayString + FROM RFC1213-MIB + OBJECT-TYPE + FROM RFC-1212 + TRAP-TYPE + FROM RFC-1215 + rielloMIB + FROM RIELLO-MIB; + +mduMIB OBJECT IDENTIFIER ::= { rielloMIB 11 } + +mduIdent OBJECT IDENTIFIER ::= { mduMIB 1 } + +mduIdentManufacturer OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The name of the mdu manufacturer." + ::= { mduIdent 1 } + +mduIdentModel OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The mdu Model designation." + ::= { mduIdent 2 } + +mduIdentSoftwareVersion OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The mdu Software version." + ::= { mduIdent 3 } + +mduIdentIOConfiguration OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The mdu input/output configuration (1 for Mono/mono, 4 for Tri/tri)." + ::= { mduIdent 4 } + +mduIdentInputSockets OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of mdu input sockets." + ::= { mduIdent 5 } + +mduIdentOutputSockets OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of mdu output sockets." + ::= { mduIdent 6 } + +mduIdentNominalCurrent OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The mdu nominal current (A)." + ::= { mduIdent 7 } + +mduIdentNominalVoltage OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The mdu nominal voltage (V)." + ::= { mduIdent 8 } + +mduIdentNominalFrequency OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The mdu nominal frequency (0.1 Hz)." + ::= { mduIdent 9 } + +mduStatus OBJECT IDENTIFIER ::= { mduMIB 2 } + +mduLineAFrequency OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The frequency of source A (0.1 Hz)." + ::= { mduStatus 1 } + +mduLineAVoltage OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The voltage of source 1 (V)." + ::= { mduStatus 2 } + +mduLineACurrent OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The current of line A (0.1 A)." + ::= { mduStatus 3 } + +mduOutput OBJECT-TYPE + SYNTAX SEQUENCE OF MduOutputSockets + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A list of output table entries." + ::= { mduStatus 4 } + +mduOutputSockets OBJECT-TYPE + SYNTAX MduOutputSockets + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "An entry containing information applicable to a + particular output line." + INDEX { mduOutputLineIndex } + ::= { mduOutput 1 } + + +MduOutputSockets ::= + SEQUENCE { + mduOutputLineIndex + INTEGER, + + mduOutputCurrent + INTEGER, + + mduOutputDisabled + INTEGER, + + mduOutputOverload + INTEGER, + + mduOutputStatus + INTEGER + } + +mduOutputLineIndex OBJECT-TYPE + SYNTAX INTEGER (1..2147483647) + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "The line identifier." + ::= { mduOutputSockets 1 } + +mduOutputCurrent OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Output current (0.1 A)" + ::= { mduOutputSockets 2 } + +mduOutputDisabled OBJECT-TYPE + SYNTAX INTEGER { + no(1), + yes(2) +} + ACCESS read-only + STATUS mandatory + DESCRIPTION + "1->line active, 2->line deactivated" + ::= { mduOutputSockets 3 } + +mduOutputOverload OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "1->line ok, 2->line deactivated for overload" + ::= { mduOutputSockets 4 } + +mduOutputStatus OBJECT-TYPE + SYNTAX INTEGER{ + off(0), + on(1), + shutdownActive(2), + shutdownImminent(3), + restoreActive(4), + overload(5), + locked(6) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "0=OFF + 1=ON + 2= Shutdown active (when a CS or a CR command is received but shutdown is not yet been executed and the "Imminent time" is not reached) + 3= Shutdown imminent (S01 ÷ S08 code) + 4= Restore active (when after that a CR command is received and the shutdown has been acted but the restore delay time is not expired) + 5= Overload alarm (F01 ÷ F08 code) + 6= Locked: OFF for overload (L01 ÷ L08 code)" + ::= { mduOutputSockets 5 } + +mduLowInputVoltage OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "1= yes, 0= no." + ::= { mduStatus 5 } + +mduHighInputVoltage OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "1= yes, 0= no." + ::= { mduStatus 6 } + +mduLowInputCurrent OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "1= yes, 0= no." + ::= { mduStatus 7 } + +mduHighInputCurrent OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "1= yes, 0= no." + ::= { mduStatus 8 } + +mduPowerFailAux1 OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "1= yes, 0= no." + ::= { mduStatus 9 } + +mduPowerFailAux2 OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "1= yes, 0= no." + ::= { mduStatus 10 } + +mduManualBypass OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "1= on manual bypass, 0= no." + ::= { mduStatus 11 } + +mduTemperature OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The temperature (°C)." + ::= { mduStatus 12 } + +mduCommand OBJECT IDENTIFIER ::= { mduMIB 3 } + +mduCommandCode OBJECT-TYPE + SYNTAX INTEGER { + shutdown(1), + restore(2), + commandDelete(3), + testPanel(22) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "This object determines the nature of the action to be + taken at the time when the countdown of the + mduShutdownDelay and mduRestoreDelay objects reaches zero. + Setting this object to shutdown(1) indicates that + the specified sockets mduOutputSocketApplyCommand will yurn off. + Setting this object to restore(2) indicates that the specified output + sockets will turn on. + command delete(3) will delete the applied command, test panel will perform + a test of LCD panel and audible alarm" + ::= { mduCommand 1 } + +mduShutdownDelay OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Setting this object will shutdown (i.e., turn off) + either the MDU output socket by the value of mduCommandCode + at the time of shutdown after the indicated number of seconds. + Setting this object to 0 will cause the shutdown to occur + immediately" + ::= { mduCommand 2 } + +mduRestoreDelay OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The restore delay." + ::= { mduCommand 3 } + +mduOutputSocketApplyCommand OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Specify the socket to apply the command, the value 0 apply to all sockets." + ::= { mduCommand 4 } + +mduCommandResult OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The command result, refer to the follow codes: + 0+mduCommandCode Command in progress + 256+mduCommandCode Wrong Command code + 512+mduCommandCode Command is not handled + 768+mduCommandCode Parameter out of range + 3584+mduCommandCode Command sent to MDU + 3840+mduCommandCode Command executed" + ::= { mduCommand 5 } + +mduTraps OBJECT IDENTIFIER ::= { mduMIB 4 } + + -- This section defines the well-known notifications sent by + -- MDU agents. + -- Care must be taken to insure that no particular notification + -- is sent to a single receiving entity more often than once + -- every minute. + +mduNormal TRAP-TYPE + ENTERPRISE mduTraps + DESCRIPTION "This trap is sent when MDU is on normal status" + ::= 1 + +mduAnomaly TRAP-TYPE + ENTERPRISE mduTraps + DESCRIPTION "This trap is sent when MDU is has some anomaly and is resent every minute" + ::= 2 + +mduFault TRAP-TYPE + ENTERPRISE mduTraps + DESCRIPTION "This trap is sent when MDU is has some fault and is resent every minute" + ::= 3 + +mduLock TRAP-TYPE + ENTERPRISE mduTraps + DESCRIPTION "This trap is sent when MDU is locked and is resent every minute" + ::= 4 + +mduManualBypassEnabled TRAP-TYPE + ENTERPRISE mduTraps + DESCRIPTION "This trap is sent when MDU is on manual bypass and is resent every minute" + ::= 5 + +END + diff --git a/MIBS/riello/RIELLOMTS-MIB b/MIBS/riello/RIELLOMTS-MIB new file mode 100644 index 0000000..eca8691 --- /dev/null +++ b/MIBS/riello/RIELLOMTS-MIB @@ -0,0 +1,592 @@ +-- RPS S.p.A enterprise MIB definition + +-- Copyright (c) RPS S.p.A. +-- Version: 1.0.1 by Michele Marcon +-- Date: 07.06.2017 + +-- Title: RIELLOMTS-MIB + +-- MDU-MIB { iso org(3) dod(6) internet(1) private(4) +-- enterprises(1) riello(5491) } + +-- ************************************************************************ +-- ************************************************************************ + +RIELLOMTS-MIB DEFINITIONS ::= BEGIN + +IMPORTS + DisplayString + FROM RFC1213-MIB + OBJECT-TYPE + FROM RFC-1212 + TRAP-TYPE + FROM RFC-1215 + rielloMIB + FROM RIELLO-MIB; + + +mtsMIB OBJECT IDENTIFIER ::= { rielloMIB 12 } + +mtsIdent OBJECT IDENTIFIER ::= { mtsMIB 1 } + +mtsIdentManufacturer OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The name of the mts manufacturer." + ::= { mtsIdent 1 } + +mtsIdentModel OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The mts Model designation." + ::= { mtsIdent 2 } + +mtsIdentSoftwareVersion OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The mts Software version." + ::= { mtsIdent 3 } + +mtsIdentIOConfiguration OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The mts input/output configuration (1 for Mono/mono, 4 for Tri/tri)." + ::= { mtsIdent 4 } + +mtsIdentType OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The mts type (5 for ATS, 6 for STS)." + ::= { mtsIdent 5 } + +mtsIdentInputSockets OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of mts input sockets." + ::= { mtsIdent 6 } + +mtsIdentOutputSockets OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of mts output sockets." + ::= { mtsIdent 7 } + +mtsIdentNominalCurrent OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The mts nominal current (A)." + ::= { mtsIdent 8 } + +mtsIdentNominalVoltage OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The mts nominal voltage (V)." + ::= { mtsIdent 9 } + +mtsIdentNominalFrequency OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The mts nominal frequency (0.1 Hz)." + ::= { mtsIdent 10 } + +mtsStatus OBJECT IDENTIFIER ::= { mtsMIB 2 } + +mtsS1Frequency OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The frequency of source 1 (0.1 Hz)." + ::= { mtsStatus 1 } + +mtsS1VoltageL1 OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The voltage of source 1, line 1 (V)." + ::= { mtsStatus 2 } + +mtsS1VoltageL2 OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The voltage of source 1, line 2 (V)." + ::= { mtsStatus 3 } + +mtsS1VoltageL3 OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The voltage of source 1, line 3 (V)." + ::= { mtsStatus 4 } + +mtsS2Frequency OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The frequency of source 2 (0.1 Hz)." + ::= { mtsStatus 5 } + +mtsS2VoltageL1 OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The voltage of source 2, line 1 (V)." + ::= { mtsStatus 6 } + +mtsS2VoltageL2 OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The voltage of source 2, line 2 (V)." + ::= { mtsStatus 7 } + +mtsS2VoltageL3 OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The voltage of source 2, line 3 (V)." + ::= { mtsStatus 8 } + +mtsPhaseDifference OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Phase difference between sources (degrees)." + ::= { mtsStatus 9 } + +mtsLoadL1 OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The output load of line 1 (%)." + ::= { mtsStatus 10 } + +mtsLoadL2 OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The output load of line 2 (%)." + ::= { mtsStatus 11 } + +mtsLoadL3 OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The output load of line 3 (%)." + ::= { mtsStatus 12 } + +mtsOutputCurrentL1 OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The output load current of line 1 (0.1 A)." + ::= { mtsStatus 13 } + +mtsOutputCurrentL2 OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The output load current of line 2 (0.1 A)." + ::= { mtsStatus 14 } + +mtsOutputCurrentL3 OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The output load current of line 3 (0.1 A)." + ::= { mtsStatus 15 } + +mtsTemperature OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The temperature (degrees C)." + ::= { mtsStatus 16 } + +mtsSoundOff OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "1= sound on, 0= sound off." + ::= { mtsStatus 17 } + +mtsTestInProgress OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "1= test in progress, 0= test not in progress." + ::= { mtsStatus 18 } + +mtsAuxPower2fail OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "1= fail, 0= not fail." + ::= { mtsStatus 19 } + +mtsAuxPower1fail OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "1= fail, 0= not fail." + ::= { mtsStatus 20 } + +mtsSynchrobad OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "1= bad, 0= not bad." + ::= { mtsStatus 21 } + +mtsPreferredSource OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "1= S2, 0= S1." + ::= { mtsStatus 22 } + +mtsTransferhinibit OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "1= hinibit, 0= not hinibit." + ::= { mtsStatus 23 } + +mtsNonSynchInibit OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "1= yes, 0= no." + ::= { mtsStatus 24 } + +mtsSourceS2bad OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "1= bad, 0= not bad." + ::= { mtsStatus 25 } + +mtsSourceS1bad OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "1= bad, 0= not bad." + ::= { mtsStatus 26 } + +mtsOnSourceS2 OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "1= yes, 0= no." + ::= { mtsStatus 27 } + +mtsOnSourceS1 OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "1= yes, 0= no." + ::= { mtsStatus 28 } + +mtsLocked OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "1= locked, 0= not locked." + ::= { mtsStatus 29 } + +mtsOutputSwitchOff OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "1= yes, 0= no." + ::= { mtsStatus 30 } + +mtsS2Blackout OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "1= blackout, 0= no blackout." + ::= { mtsStatus 31 } + +mtsS2PhaseseqNotok OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "1= yes, 0= no." + ::= { mtsStatus 32 } + +mtsS2VoltOutoftolerance OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "1= yes, 0= no." + ::= { mtsStatus 33 } + +mtsS1SCRAlternateLoss OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "1= yes, 0= no." + ::= { mtsStatus 34 } + +mtsS1InputSWOff OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "1= yes, 0= no." + ::= { mtsStatus 35 } + +mtsS1Frequencybad OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "1= bad, 0= not bad." + ::= { mtsStatus 36 } + +mtsS1Balancebad OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "1= yes, 0= no." + ::= { mtsStatus 37 } + +mtsS1Blackout OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "1= yes, 0= no." + ::= { mtsStatus 38 } + +mtsS1PhaseseqNotok OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "1= yes, 0= no." + ::= { mtsStatus 39 } + +mtsS1VoltOutoftolerance OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "1= yes, 0= no." + ::= { mtsStatus 40 } + +mtsUserlogin OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "1= yes, 0= no." + ::= { mtsStatus 41 } + +mtsAlarmTemperature OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "1= yes, 0= no." + ::= { mtsStatus 42 } + +mtsAlarmOverload OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "1= yes, 0= no." + ::= { mtsStatus 43 } + +mtsGeneralFailure OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "1= yes, 0= no." + ::= { mtsStatus 44 } + +mtsS2InputMCCBtrip OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "1= yes, 0= no." + ::= { mtsStatus 45 } + +mtsS1InputMCCBtrip OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "1= yes, 0= no." + ::= { mtsStatus 46 } + +mtsServicelogin OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "1= yes, 0= no." + ::= { mtsStatus 47 } + +mtsOutputSCRalternanceloss OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "1= yes, 0= no." + ::= { mtsStatus 48 } + +mtsManBypassS2 OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "1= yes, 0= no." + ::= { mtsStatus 49 } + +mtsManBypassS1 OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "1= yes, 0= no." + ::= { mtsStatus 50 } + +mtsManTransferS2 OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "1= yes, 0= no." + ::= { mtsStatus 51 } + +mtsManTransferS1 OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "1= yes, 0= no." + ::= { mtsStatus 52 } + +mtsS2SCRalternanceloss OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "1= yes, 0= no." + ::= { mtsStatus 53 } + +mtsS2InputSWoff OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "1= yes, 0= no." + ::= { mtsStatus 54 } + +mtsS2Frequencybad OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "1= yes, 0= no." + ::= { mtsStatus 55 } + +mtsS2Balancebad OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "1= yes, 0= no." + ::= { mtsStatus 56 } + + +mtsTraps OBJECT IDENTIFIER ::= { mtsMIB 4 } + + +mtsNormal TRAP-TYPE + ENTERPRISE mtsTraps + DESCRIPTION "This trap is sent when STS is on normal status" + ::= 1 + +mtsAnomaly TRAP-TYPE + ENTERPRISE mtsTraps + DESCRIPTION "This trap is sent when STS is has some anomaly and is resent every minute" + ::= 2 + +mtsFault TRAP-TYPE + ENTERPRISE mtsTraps + DESCRIPTION "This trap is sent when STS is has some fault and is resent every minute" + ::= 3 + +mtsLock TRAP-TYPE + ENTERPRISE mtsTraps + DESCRIPTION "This trap is sent when STS is locked and is resent every minute" + ::= 4 + +mtsManualBypassEnabled TRAP-TYPE + ENTERPRISE mtsTraps + DESCRIPTION "This trap is sent when STS is on manual bypass and is resent every minute" + ::= 5 + +END + diff --git a/MIBS/riello/RIELLOUPS-MIB b/MIBS/riello/RIELLOUPS-MIB new file mode 100644 index 0000000..35b1726 --- /dev/null +++ b/MIBS/riello/RIELLOUPS-MIB @@ -0,0 +1,1643 @@ +-- RPS S.p.A enterprise MIB definition + +-- Copyright (c) RPS S.p.A. +-- Version: 1.0.3 by Michele Marcon +-- Date: 29.05.2017 + +-- Title: RIELLOUPS-MIB + +-- RielloUPS-MIB { iso org(3) dod(6) internet(1) private(4) +-- enterprises(1) riello(5491) } + +-- ************************************************************************ +-- ************************************************************************ + +RIELLOUPS-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, NOTIFICATION-TYPE, + OBJECT-IDENTITY, Counter32, Gauge32, Integer32 + FROM SNMPv2-SMI + DisplayString, TimeStamp, TimeInterval, TestAndIncr, + AutonomousType, TEXTUAL-CONVENTION + FROM SNMPv2-TC + MODULE-COMPLIANCE, OBJECT-GROUP + FROM SNMPv2-CONF + Gauge, Counter + FROM RFC1155-SMI + OBJECT-TYPE + FROM RFC-1212 + TRAP-TYPE + FROM RFC-1215 + rielloMIB + FROM RIELLO-MIB; + +rupsMIB OBJECT IDENTIFIER ::= { rielloMIB 10 } + + PositiveInteger ::= TEXTUAL-CONVENTION + DISPLAY-HINT "d" + STATUS current + DESCRIPTION + "This data type is a non-zero and non-negative value." + SYNTAX INTEGER (1..2147483647) + + NonNegativeInteger ::= TEXTUAL-CONVENTION + DISPLAY-HINT "d" + STATUS current + DESCRIPTION + "This data type is a non-negative value." + SYNTAX INTEGER (0..2147483647) + + +rupsObjects OBJECT IDENTIFIER ::= { rupsMIB 1 } + +rupsIdent OBJECT IDENTIFIER ::= { rupsObjects 1 } + +rupsIdentManufacturer OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The name of the UPS manufacturer." + ::= { rupsIdent 1 } + +rupsIdentModel OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The UPS Model designation." + ::= { rupsIdent 2 } + +rupsIdentUPSSoftwareVersion OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The UPS firmware/software version(s). This variable + may or may not have the same value as + upsIdentAgentSoftwareVersion in some implementations." + ::= { rupsIdent 3 } + +rupsIdentAgentSoftwareVersion OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The UPS agent software version. This variable may or + may not have the same value as + upsIdentUPSSoftwareVersion in some implementations." + ::= { rupsIdent 4 } + +rupsIdentName OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-write + STATUS mandatory + DESCRIPTION + "A string identifying the UPS. This object should be + set by the administrator." + ::= { rupsIdent 5 } + +rupsIdentAttachedDevices OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-write + STATUS mandatory + DESCRIPTION + "A string identifying the devices attached to the + output(s) of the UPS. This object should be set by + the administrator." + ::= { rupsIdent 6 } + +rupsIdentIOConfiguration OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The UPS IO configuration." + ::= { rupsIdent 7 } + +rupsIdentUpsType OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The UPS type." + ::= { rupsIdent 8 } + +rupsIdentNominalPowerVA OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The UPS nominal power VA." + ::= { rupsIdent 9 } + +rupsIdentNominalPowerW OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The UPS nominal power W." + ::= { rupsIdent 10 } + +rupsIdentBatteryVoltage OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The UPS nominal battery voltage." + ::= { rupsIdent 11 } + +rupsIdentBatteryCapacity OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The UPS nominal battery capacity." + ::= { rupsIdent 12 } + +rupsIdentOutputVoltage OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The UPS nominal output voltage." + ::= { rupsIdent 13 } + +rupsIdentOutputFrequency OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The UPS nominal output frequency." + ::= { rupsIdent 14 } + + +rupsBattery OBJECT IDENTIFIER ::= { rupsObjects 2 } + +rupsBatteryStatus OBJECT-TYPE + SYNTAX INTEGER { + unknown(1), + batteryNormal(2), + batteryLow(3), + batteryDepleted(4) +} + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The indication of the capacity remaining in the UPS + system's batteries. A value of batteryNormal + indicates that the remaining run-time is greater than + rupsConfigLowBattTime. A value of batteryLow indicates + that the remaining battery run-time is less than or + equal to rupsConfigLowBattTime. A value of + batteryDepleted indicates that the UPS will be unable + to sustain the present load when and if the utility + power is lost (including the possibility that the + utility power is currently absent and the UPS is + unable to sustain the output)." + ::= { rupsBattery 1 } + +rupsSecondsOnBattery OBJECT-TYPE + SYNTAX NonNegativeInteger -- UNITS seconds + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "If the unit is on battery power, the elapsed time + since the UPS last switched to battery power, or the + time since the network management subsystem was last + restarted, whichever is less. Zero shall be returned + if the unit is not on battery power." + ::= { rupsBattery 2 } + +rupsEstimatedMinutesRemaining OBJECT-TYPE + SYNTAX PositiveInteger -- UNITS minutes + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "An estimate of the time to battery charge depletion + under the present load conditions if the utility power + is off and remains off, or if it were to be lost and + remain off." + ::= { rupsBattery 3 } + +rupsEstimatedChargeRemaining OBJECT-TYPE + SYNTAX INTEGER -- UNITS percent + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "An estimate of the battery charge remaining expressed + as a percent of full charge." + ::= { rupsBattery 4 } + +rupsBatteryVoltage OBJECT-TYPE + SYNTAX NonNegativeInteger -- UNITS 0.1 Volt DC + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The magnitude of the present battery voltage." + ::= { rupsBattery 5 } + +rupsBatteryCurrent OBJECT-TYPE + SYNTAX INTEGER (-2147483648..2147483647) -- UNITS 0.1 Amp DC + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The present battery current." + ::= { rupsBattery 6 } + +rupsBatteryTemperature OBJECT-TYPE + SYNTAX INTEGER (-2147483648..2147483647) -- UNITS degrees Centigrade + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The ambient temperature at or near the UPS Battery + casing." + ::= { rupsBattery 7 } + +rupsBatteryPositiveVoltage OBJECT-TYPE + SYNTAX INTEGER (-2147483648..2147483647) -- UNITS V + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The UPS Battery positive voltage." + ::= { rupsBattery 8 } + +rupsBatteryNegativeVoltage OBJECT-TYPE + SYNTAX INTEGER (-2147483648..2147483647) -- UNITS V + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The UPS Battery negative voltage." + ::= { rupsBattery 9 } + +rupsBatteryPositiveCurrent OBJECT-TYPE + SYNTAX INTEGER (-2147483648..2147483647) -- UNITS 0.1 A + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The UPS Battery positive current." + ::= { rupsBattery 10 } + +rupsBatteryNegativeCurrent OBJECT-TYPE + SYNTAX INTEGER (-2147483648..2147483647) -- UNITS 0.1 A + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The UPS Battery positive current." + ::= { rupsBattery 11 } + +rupsIsCharging OBJECT-TYPE + SYNTAX INTEGER { + discharging(0), + charging(1) +} + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The charging/discharging status of the battery" + ::= { rupsBattery 12 } + +rupsInput OBJECT IDENTIFIER ::= { rupsObjects 3 } + +rupsInputLineBads OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A count of the number of times the input entered an + out-of-tolerance condition as defined by the + manufacturer. This count is incremented by one each + time the input transitions from zero out-of-tolerance + lines to one or more input lines out-of-tolerance." + ::= { rupsInput 1 } + +rupsInputNumLines OBJECT-TYPE + SYNTAX NonNegativeInteger + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of input lines utilized in this device. + This variable indicates the number of rows in the + input table." + ::= { rupsInput 2 } + +rupsInputTable OBJECT-TYPE + SYNTAX SEQUENCE OF RUpsInputEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A list of input table entries. The number of entries + is given by the value of upsInputNumLines." + ::= { rupsInput 3 } + +rupsInputEntry OBJECT-TYPE + SYNTAX RUpsInputEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "An entry containing information applicable to a + particular input line." + INDEX { rupsInputLineIndex } + ::= { rupsInputTable 1 } + +RUpsInputEntry ::= + SEQUENCE { + rupsInputLineIndex + PositiveInteger, + + rupsInputFrequency + NonNegativeInteger, + + rupsInputVoltage + NonNegativeInteger, + + rupsInputCurrent + NonNegativeInteger, + + rupsInputTruePower + NonNegativeInteger + } + +rupsInputLineIndex OBJECT-TYPE + SYNTAX PositiveInteger + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "The input line identifier." + ::= { rupsInputEntry 1 } + +rupsInputFrequency OBJECT-TYPE + SYNTAX NonNegativeInteger -- UNITS 0.1 Hertz + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The present input frequency." + ::= { rupsInputEntry 2 } + +rupsInputVoltage OBJECT-TYPE + SYNTAX NonNegativeInteger -- UNITS RMS Volts + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The magnitude of the present input voltage." + ::= { rupsInputEntry 3 } + +rupsInputCurrent OBJECT-TYPE + SYNTAX NonNegativeInteger -- UNITS 0.1 RMS Amp + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The magnitude of the present input current." + ::= { rupsInputEntry 4 } + +rupsInputTruePower OBJECT-TYPE + SYNTAX NonNegativeInteger -- UNITS Watts + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The magnitude of the present input true power." + ::= { rupsInputEntry 5 } + +rupsOutput OBJECT IDENTIFIER ::= { rupsObjects 4 } + +rupsOutputSource OBJECT-TYPE + SYNTAX INTEGER { + other(1), + none(2), + normal(3), + bypass(4), + battery(5), + booster(6), + reducer(7) +} + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The present source of output power. The enumeration + none(2) indicates that there is no source of output + power (and therefore no output power), for example, + the system has opened the output breaker." + ::= { rupsOutput 1 } + +rupsOutputFrequency OBJECT-TYPE + SYNTAX NonNegativeInteger -- UNITS 0.1 Hertz + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The present output frequency." + ::= { rupsOutput 2 } + +rupsOutputNumLines OBJECT-TYPE + SYNTAX NonNegativeInteger + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of output lines utilized in this device. + This variable indicates the number of rows in the + output table." + ::= { rupsOutput 3 } + +rupsOutputTable OBJECT-TYPE + SYNTAX SEQUENCE OF RUpsOutputEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A list of output table entries. The number of + entries is given by the value of rupsOutputNumLines." + ::= { rupsOutput 4 } + +rupsOutputEntry OBJECT-TYPE + SYNTAX RUpsOutputEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "An entry containing information applicable to a + particular output line." + INDEX { rupsOutputLineIndex } + ::= { rupsOutputTable 1 } + +RUpsOutputEntry ::= + SEQUENCE { + rupsOutputLineIndex + PositiveInteger, + + rupsOutputVoltage + NonNegativeInteger, + + rupsOutputCurrent + NonNegativeInteger, + + rupsOutputPower + NonNegativeInteger, + + rupsOutputPercentLoad + INTEGER, + + rupsOutputPeakCurrent + NonNegativeInteger + } + +rupsOutputLineIndex OBJECT-TYPE + SYNTAX PositiveInteger + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "The output line identifier." + ::= { rupsOutputEntry 1 } + +rupsOutputVoltage OBJECT-TYPE + SYNTAX NonNegativeInteger -- UNITS RMS Volts + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The present output voltage." + ::= { rupsOutputEntry 2 } + +rupsOutputCurrent OBJECT-TYPE + SYNTAX NonNegativeInteger -- UNITS 0.1 RMS Amp + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The present output current." + ::= { rupsOutputEntry 3 } + +rupsOutputPower OBJECT-TYPE + SYNTAX NonNegativeInteger -- UNITS Watts + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The present output true power." + ::= { rupsOutputEntry 4 } + +rupsOutputPercentLoad OBJECT-TYPE + SYNTAX INTEGER -- UNITS percent + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The percentage of the UPS power capacity presently + being used on this output line, i.e., the greater of + the percent load of true power capacity and the + percent load of VA." + ::= { rupsOutputEntry 5 } + +rupsOutputPeakCurrent OBJECT-TYPE + SYNTAX NonNegativeInteger -- UNITS 0.1 RMS Amp + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The present output peak current." + ::= { rupsOutputEntry 6 } + + +rupsBypass OBJECT IDENTIFIER ::= { rupsObjects 5 } + +rupsBypassFrequency OBJECT-TYPE + SYNTAX NonNegativeInteger -- UNITS 0.1 Hertz + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The present bypass frequency." + ::= { rupsBypass 1 } + +rupsBypassNumLines OBJECT-TYPE + SYNTAX NonNegativeInteger + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of bypass lines utilized in this device. + This entry indicates the number of rows in the bypass + table." + ::= { rupsBypass 2 } + +rupsBypassTable OBJECT-TYPE + SYNTAX SEQUENCE OF RUpsBypassEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A list of bypass table entries. The number of + entries is given by the value of rupsBypassNumLines." + ::= { rupsBypass 3 } + +rupsBypassEntry OBJECT-TYPE + SYNTAX RUpsBypassEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "An entry containing information applicable to a + particular bypass input." + INDEX { rupsBypassLineIndex } + ::= { rupsBypassTable 1 } + +RUpsBypassEntry ::= + SEQUENCE { + rupsBypassLineIndex + PositiveInteger, + + rupsBypassVoltage + NonNegativeInteger, + + rupsBypassCurrent + NonNegativeInteger, + + rupsBypassPower + NonNegativeInteger + } + +rupsBypassLineIndex OBJECT-TYPE + SYNTAX PositiveInteger + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "The bypass line identifier." + ::= { rupsBypassEntry 1 } + +rupsBypassVoltage OBJECT-TYPE + SYNTAX NonNegativeInteger -- UNITS RMS Volts + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The present bypass voltage." + ::= { rupsBypassEntry 2 } + +rupsBypassCurrent OBJECT-TYPE + SYNTAX NonNegativeInteger -- UNITS 0.1 RMS Amp + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The present bypass current." + ::= { rupsBypassEntry 3 } + +rupsBypassPower OBJECT-TYPE + SYNTAX NonNegativeInteger -- UNITS Watts + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The present true power conveyed by the bypass." + ::= { rupsBypassEntry 4 } + +rupsAlarm OBJECT IDENTIFIER ::= { rupsObjects 6 } + +rupsAlarmsPresent OBJECT-TYPE + SYNTAX Gauge + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The present number of active alarm conditions." + ::= { rupsAlarm 1 } + +rupsAlarmTable OBJECT-TYPE + SYNTAX SEQUENCE OF RUpsAlarmEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A list of alarm table entries. The table contains + zero, one, or many rows at any moment, depending upon + the number of alarm conditions in effect. The table + is initially empty at agent startup. The agent + creates a row in the table each time a condition is + detected and deletes that row when that condition no + longer pertains. The agent creates the first row with + rupsAlarmId equal to 1, and increments the value of + rupsAlarmId each time a new row is created, wrapping to + the first free value greater than or equal to 1 when + the maximum value of rupsAlarmId would otherwise be + exceeded. Consequently, after multiple operations, + the table may become sparse, e.g., containing entries + for rows 95, 100, 101, and 203 and the entries should + not be assumed to be in chronological order because + rupsAlarmId might have wrapped. + + Alarms are named by an AutonomousType (OBJECT + IDENTIFIER), rupsAlarmDescr, to allow a single table to + reflect well known alarms plus alarms defined by a + particular implementation, i.e., as documented in the + private enterprise MIB definition for the device. No + two rows will have the same value of rupsAlarmDescr, + since alarms define conditions. In order to meet this + requirement, care should be taken in the definition of + alarm conditions to insure that a system cannot enter + the same condition multiple times simultaneously. + + The number of rows in the table at any given time is + reflected by the value of rupsAlarmsPresent." + ::= { rupsAlarm 2 } + +rupsAlarmEntry OBJECT-TYPE + SYNTAX RUpsAlarmEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "An entry containing information applicable to a + + + + + + particular alarm." + INDEX { rupsAlarmId } + ::= { rupsAlarmTable 1 } + +RUpsAlarmEntry ::= + SEQUENCE { + rupsAlarmId + PositiveInteger, + + rupsAlarmDescr + OBJECT IDENTIFIER, + + rupsAlarmTime + PositiveInteger + } + +rupsAlarmId OBJECT-TYPE + SYNTAX PositiveInteger + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A unique identifier for an alarm condition. This + value must remain constant." + ::= { rupsAlarmEntry 1 } + +rupsAlarmDescr OBJECT-TYPE + SYNTAX OBJECT IDENTIFIER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A reference to an alarm description object. The + object referenced should not be accessible, but rather + be used to provide a unique description of the alarm + condition." + ::= { rupsAlarmEntry 2 } + +rupsAlarmTime OBJECT-TYPE + SYNTAX PositiveInteger + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The value of sysUpTime when the alarm condition was + detected. If the alarm condition was detected at the + time of agent startup and presumably existed before + agent startup, the value of rupsAlarmTime shall equal + 0." + ::= { rupsAlarmEntry 3 } + +rupsWellKnownAlarms OBJECT IDENTIFIER ::= { rupsAlarm 3 } + +rupsAlarmBatteryBad OBJECT IDENTIFIER ::= { rupsWellKnownAlarms 1 } + +rupsAlarmOnBattery OBJECT IDENTIFIER ::= { rupsWellKnownAlarms 2 } + +rupsAlarmLowBattery OBJECT IDENTIFIER ::= { rupsWellKnownAlarms 3 } + +rupsAlarmShutdownImminent OBJECT IDENTIFIER ::= { rupsWellKnownAlarms 4 } + +rupsAlarmTempBad OBJECT IDENTIFIER ::= { rupsWellKnownAlarms 5 } + +rupsAlarmFault OBJECT IDENTIFIER ::= { rupsWellKnownAlarms 6 } + +rupsAlarmInternal OBJECT IDENTIFIER ::= { rupsWellKnownAlarms 7 } + +rupsAlarmOutputOverload OBJECT IDENTIFIER ::= { rupsWellKnownAlarms 8 } + +rupsAlarmOnBypass OBJECT IDENTIFIER ::= { rupsWellKnownAlarms 9 } + +rupsAlarmBypassBad OBJECT IDENTIFIER ::= { rupsWellKnownAlarms 10 } + +rupsAlarmShutdownImminent OBJECT IDENTIFIER ::= { rupsWellKnownAlarms 11 } + + -- + -- The Test Group + -- + + rupsTest OBJECT IDENTIFIER ::= { rupsObjects 7 } + + rupsTestId OBJECT-TYPE + SYNTAX OBJECT IDENTIFIER + ACCESS read-write + STATUS optional + DESCRIPTION + "The test is named by an OBJECT IDENTIFIER which + allows a standard mechanism for the initiation of + tests, including the well known tests identified in + this document as well as those introduced by a + particular implementation, i.e., as documented in the + private enterprise MIB definition for the device. + + Setting this variable initiates the named test. Sets + to this variable require the presence of + upsTestSpinLock in the same SNMP message. + + The set request will be rejected with an appropriate + error message if the requested test cannot be + performed, including attempts to start a test when + another test is already in progress. The status of + the current or last test is maintained in + upsTestResultsSummary. Tests in progress may be + aborted by setting the rupsTestId variable to + rupsTestAbortTestInProgress. + + Read operations return the value of the name of the + test in progress if a test is in progress or the name + of the last test performed if no test is in progress, + unless no test has been run, in which case the well + known value upsTestNoTestsInitiated is returned." + ::= { rupsTest 1 } + + -- see [6] for more information on the semantics of objects with + -- syntax of TestAndIncr + + rupsTestSpinLock OBJECT-TYPE + SYNTAX TestAndIncr + ACCESS read-write + STATUS optional + DESCRIPTION + "A spin lock on the test subsystem. The spinlock is + used as follows. + + Before starting a test, a manager-station should make + sure that a test is not in progress as follows: + + try_again: + get (upsTestSpinLock) + while (upsTestResultsSummary == inProgress) { + /* loop while a test is running for another + manager */ + short delay + get (upsTestSpinLock) + } + lock_value = upsTestSpinLock + /* no test in progress, start the test */ + set (upsTestSpinLock = lock_value, upsTestId = + requested_test) + if (error_index == 1) { /* (upsTestSpinLock + failed) */ + /* if problem is not access control, then + some other manager slipped in ahead of us + */ + goto try_again + } + if (error_index == 2) { /* (upsTestId) */ + /* cannot perform the test */ + give up + } + /* test started ok */ + /* wait for test completion by polling + upsTestResultsSummary */ + get (upsTestSpinLock, upsTestResultsSummary, + upsTestResultsDetail) + while (upsTestResultsSummary == inProgress) { + short delay + get (upsTestSpinLock, upsTestResultsSummary, + upsTestResultsDetail) + } + /* when test completes, retrieve any additional + test results */ + /* if upsTestSpinLock == lock_value + 1, then + these are our test */ + /* results (as opposed to another manager's */ + The initial value of upsTestSpinLock at agent + initialization shall + be 1." + ::= { rupsTest 2 } + + rupsTestResultsSummary OBJECT-TYPE + SYNTAX INTEGER { + donePass(1), + doneWarning(2), + doneError(3), + aborted(4), + inProgress(5), + noTestsInitiated(6) + } + ACCESS read-only + STATUS optional + DESCRIPTION + "The results of the current or last UPS diagnostics + test performed. The values for donePass(1), + doneWarning(2), and doneError(3) indicate that the + test completed either successfully, with a warning, or + with an error, respectively. The value aborted(4) is + returned for tests which are aborted by setting the + value of upsTestId to upsTestAbortTestInProgress. + Tests which have not yet concluded are indicated by + inProgress(5). The value noTestsInitiated(6) + indicates that no previous test results are available, + such as is the case when no tests have been run since + the last reinitialization of the network management + subsystem and the system has no provision for non- + volatile storage of test results." + ::= { rupsTest 3 } + + rupsTestResultsDetail OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + ACCESS read-only + STATUS optional + DESCRIPTION + "Additional information about upsTestResultsSummary. + If no additional information available, a zero length + string is returned." + ::= { rupsTest 4 } + + rupsTestStartTime OBJECT-TYPE + SYNTAX TimeStamp + ACCESS read-only + STATUS optional + DESCRIPTION + "The value of sysUpTime at the time the test in + progress was initiated, or, if no test is in progress, + the time the previous test was initiated. If the + value of upsTestResultsSummary is noTestsInitiated(6), + upsTestStartTime has the value 0." + ::= { rupsTest 5 } + + rupsTestElapsedTime OBJECT-TYPE + SYNTAX TimeInterval + ACCESS read-only + STATUS optional + DESCRIPTION + "The amount of time, in TimeTicks, since the test in + progress was initiated, or, if no test is in progress, + the previous test took to complete. If the value of + upsTestResultsSummary is noTestsInitiated(6), + upsTestElapsedTime has the value 0." + ::= { rupsTest 6 } + + -- + -- Well known tests. + -- + + rupsWellKnownTests OBJECT IDENTIFIER ::= { rupsTest 7 } + + + rupsTestNoTestsInitiated OBJECT IDENTIFIER + -- "No tests have been initiated and no test is in + -- progress." + ::= { rupsWellKnownTests 1 } + + rupsTestAbortTestInProgress OBJECT IDENTIFIER + -- "The test in progress is to be aborted / the test in + -- progress was aborted." + ::= { rupsWellKnownTests 2 } + + rupsTestGeneralSystemsTest OBJECT IDENTIFIER + -- "The manufacturer's standard test of UPS device + -- systems." + ::= { rupsWellKnownTests 3 } + + rupsTestQuickBatteryTest OBJECT IDENTIFIER + -- "A test that is sufficient to determine if the battery + -- needs replacement." + ::= { rupsWellKnownTests 4 } + + rupsTestDeepBatteryCalibration OBJECT IDENTIFIER + -- "The system is placed on battery to a discharge level, + -- set by the manufacturer, sufficient to determine + -- battery replacement and battery run-time with a high + -- degree of confidence. WARNING: this test will leave + -- the battery in a low charge state and will require + -- time for recharging to a level sufficient to provide + -- normal battery duration for the protected load." + ::= { rupsWellKnownTests 5 } + +rupsControl OBJECT IDENTIFIER ::= { rupsObjects 8 } + +rupsShutdownType OBJECT-TYPE + SYNTAX INTEGER { + output(1), + system(2) +} + ACCESS read-write + STATUS mandatory + DESCRIPTION + "This object determines the nature of the action to be + taken at the time when the countdown of the + + + + + + upsShutdownAfterDelay and upsRebootWithDuration + objects reaches zero. + + Setting this object to output(1) indicates that + shutdown requests should cause only the output of the + UPS to turn off. Setting this object to system(2) + indicates that shutdown requests will cause the entire + UPS system to turn off." + ::= { rupsControl 1 } + +rupsShutdownAfterDelay OBJECT-TYPE + SYNTAX INTEGER -- UNITS seconds + + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Setting this object will shutdown (i.e., turn off) + either the UPS output or the UPS system (as determined + by the value of upsShutdownType at the time of + shutdown) after the indicated number of seconds, or + less if the UPS batteries become depleted. Setting + this object to 0 will cause the shutdown to occur + immediately. Setting this object to -1 will abort the + countdown. If the system is already in the desired + state at the time the countdown reaches 0, then + nothing will happen. That is, there is no additional + action at that time if upsShutdownType = system and + the system is already off. Similarly, there is no + additional action at that time if upsShutdownType = + output and the output is already off. When read, + upsShutdownAfterDelay will return the number of + seconds remaining until shutdown, or -1 if no shutdown + countdown is in effect. On some systems, if the agent + is restarted while a shutdown countdown is in effect, + the countdown may be aborted. Sets to this object + override any upsShutdownAfterDelay already in effect." + ::= { rupsControl 2 } + +rupsStartupAfterDelay OBJECT-TYPE + SYNTAX INTEGER -- UNITS seconds + + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Setting this object will start the output after the + indicated number of seconds, including starting the + UPS, if necessary. Setting this object to 0 will + cause the startup to occur immediately. Setting this + + + + + + object to -1 will abort the countdown. If the output + is already on at the time the countdown reaches 0, + then nothing will happen. Sets to this object + override the effect of any upsStartupAfterDelay + countdown or upsRebootWithDuration countdown in + progress. When read, upsStartupAfterDelay will return + the number of seconds until startup, or -1 if no + startup countdown is in effect. If the countdown + expires during a utility failure, the startup shall + not occur until the utility power is restored. On + some systems, if the agent is restarted while a + startup countdown is in effect, the countdown is + aborted." + ::= { rupsControl 3 } + +rupsRebootWithDuration OBJECT-TYPE + SYNTAX INTEGER -- UNITS seconds + + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Setting this object will immediately shutdown (i.e., + turn off) either the UPS output or the UPS system (as + determined by the value of upsShutdownType at the time + of shutdown) for a period equal to the indicated + number of seconds, after which time the output will be + started, including starting the UPS, if necessary. If + the number of seconds required to perform the request + is greater than the requested duration, then the + requested shutdown and startup cycle shall be + performed in the minimum time possible, but in no case + shall this require more than the requested duration + plus 60 seconds. When read, upsRebootWithDuration + shall return the number of seconds remaining in the + countdown, or -1 if no countdown is in progress. If + the startup should occur during a utility failure, the + startup shall not occur until the utility power is + restored." + ::= { rupsControl 4 } + +rupsAutoRestart OBJECT-TYPE + SYNTAX INTEGER { + on(1), + off(2) +} + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Setting this object to 'on' will cause the UPS system + to restart after a shutdown if the shutdown occurred + during a power loss as a result of either a + upsShutdownAfterDelay or an internal battery depleted + condition. Setting this object to 'off' will prevent + the UPS system from restarting after a shutdown until + an operator manually or remotely explicitly restarts + it. If the UPS is in a startup or reboot countdown, + then the UPS will not restart until that delay has + been satisfied." + ::= { rupsControl 5 } + +rupsTemperature OBJECT IDENTIFIER ::= { rupsObjects 10 } + +rupsSystemTemperature OBJECT-TYPE + SYNTAX INTEGER -- UNITS degree Celsius + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The present temperature." + ::= { rupsTemperature 1 } + +rupsPowerTemperature1 OBJECT-TYPE + SYNTAX INTEGER -- UNITS degree Celsius + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The present temperature." + ::= { rupsTemperature 2 } + +rupsPowerTemperature2 OBJECT-TYPE + SYNTAX INTEGER -- UNITS degree Celsius + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The present temperature." + ::= { rupsTemperature 3 } + +rupsPowerTemperature3 OBJECT-TYPE + SYNTAX INTEGER -- UNITS degree Celsius + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The present temperature." + ::= { rupsTemperature 4 } + +rupsChargerTemperature OBJECT-TYPE + SYNTAX INTEGER -- UNITS degree Celsius + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The present temperature." + ::= { rupsTemperature 5 } + +rupsBatteryPositiveTemperature OBJECT-TYPE + SYNTAX INTEGER -- UNITS degree Celsius + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The present temperature." + ::= { rupsTemperature 6 } + +rupsBatteryNegativeTemperature OBJECT-TYPE + SYNTAX INTEGER -- UNITS degree Celsius + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The present temperature." + ::= { rupsTemperature 7 } + +rupsBatteryExternalTemperature OBJECT-TYPE + SYNTAX INTEGER -- UNITS degree Celsius + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The present temperature." + ::= { rupsTemperature 8 } + +rupsMPS OBJECT IDENTIFIER ::= { rupsObjects 20 } + +mpsAlarmGroupS OBJECT-TYPE + SYNTAX INTEGER + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The alarm group s." + ::= { rupsMPS 1 } + +mpsAlarmGroupC OBJECT-TYPE + SYNTAX INTEGER + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The alarm group c." + ::= { rupsMPS 2 } + +mpsAlarmGroupB OBJECT-TYPE + SYNTAX INTEGER + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The alarm group b." + ::= { rupsMPS 3 } + +mpsAlarmGroupR OBJECT-TYPE + SYNTAX INTEGER + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The alarm group r." + ::= { rupsMPS 4 } + +mpsAlarmGroupRI OBJECT-TYPE + SYNTAX INTEGER + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The alarm group RI." + ::= { rupsMPS 5 } + +mpsAlarmGroupI OBJECT-TYPE + SYNTAX INTEGER + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The alarm group I." + ::= { rupsMPS 6 } + +mpsAlarmGroupA0 OBJECT-TYPE + SYNTAX INTEGER + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The alarm group A0." + ::= { rupsMPS 7 } + +mpsAlarmGroupA1 OBJECT-TYPE + SYNTAX INTEGER + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The alarm group A1." + ::= { rupsMPS 8 } + +mpsAlarmGroupA2 OBJECT-TYPE + SYNTAX INTEGER + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The alarm group A2." + ::= { rupsMPS 9 } + +mpsAlarmGroupA3 OBJECT-TYPE + SYNTAX INTEGER + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The alarm group A3." + ::= { rupsMPS 10 } + +mpsAlarmGroupA4 OBJECT-TYPE + SYNTAX INTEGER + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The alarm group A4." + ::= { rupsMPS 11 } + +mpsAlarmGroupA5 OBJECT-TYPE + SYNTAX INTEGER + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The alarm group A5." + ::= { rupsMPS 12 } + +rupsMST OBJECT IDENTIFIER ::= { rupsObjects 21 } + +mstWarningGroupW0W1 OBJECT-TYPE + SYNTAX INTEGER + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The anomaly group W0W1." + ::= { rupsMST 1 } + +mstAnomalyGroupA0A1 OBJECT-TYPE + SYNTAX INTEGER + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The anomaly group A0A1." + ::= { rupsMST 2 } + +mstAnomalyGroupA2A3 OBJECT-TYPE + SYNTAX INTEGER + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The anomaly group A2A3." + ::= { rupsMST 3 } + +mstAnomalyGroupA4A5 OBJECT-TYPE + SYNTAX INTEGER + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The anomaly group A4A5." + ::= { rupsMST 4 } + +mstFaultGroupF0F1 OBJECT-TYPE + SYNTAX INTEGER + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The fault group F0F1." + ::= { rupsMST 5 } + +mstFaultGroupF2F3 OBJECT-TYPE + SYNTAX INTEGER + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The fault group F2F3." + ::= { rupsMST 6 } + +mstFaultGroupF4F5 OBJECT-TYPE + SYNTAX INTEGER + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The fault group F4F5." + ::= { rupsMST 7 } + +mstLockGroupL0L1 OBJECT-TYPE + SYNTAX INTEGER + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The lock group L0L1." + ::= { rupsMST 8 } + +mstLockGroupL2L3 OBJECT-TYPE + SYNTAX INTEGER + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The lock group L2L3." + ::= { rupsMST 9 } + +mstLockGroupL4L5 OBJECT-TYPE + SYNTAX INTEGER + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The lock group L4L5." + ::= { rupsMST 10 } + +mstEventGroupE0E1 OBJECT-TYPE + SYNTAX INTEGER + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The event group E0E1." + ::= { rupsMST 11 } + +rupsMPW OBJECT IDENTIFIER ::= { rupsObjects 22 } + +mpwSystemStatusGroup1 OBJECT-TYPE + SYNTAX INTEGER + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The system status group 1." + ::= { rupsMPW 1 } + +mpwSystemStatusGroup2 OBJECT-TYPE + SYNTAX INTEGER + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The system status group 2." + ::= { rupsMPW 2 } + +mpwSystemStatusGroup3 OBJECT-TYPE + SYNTAX INTEGER + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The system status group 3." + ::= { rupsMPW 3 } + +mpwBypassModuleAlarmGroup OBJECT-TYPE + SYNTAX INTEGER + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The bypass module alarm group." + ::= { rupsMPW 4 } + +mpwPowerModule1AlarmGroup OBJECT-TYPE + SYNTAX INTEGER + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The power module 1 alarm group." + ::= { rupsMPW 5 } + +mpwPowerModule2AlarmGroup OBJECT-TYPE + SYNTAX INTEGER + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The power module 2 alarm group." + ::= { rupsMPW 6 } + +mpwPowerModule3AlarmGroup OBJECT-TYPE + SYNTAX INTEGER + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The power module 3 alarm group." + ::= { rupsMPW 7 } + +mpwPowerModule4AlarmGroup OBJECT-TYPE + SYNTAX INTEGER + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The power module 4 alarm group." + ::= { rupsMPW 8 } + +mpwPowerModule5AlarmGroup OBJECT-TYPE + SYNTAX INTEGER + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The power module 5 alarm group." + ::= { rupsMPW 9 } + +mpwPowerModule6AlarmGroup OBJECT-TYPE + SYNTAX INTEGER + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The power module 6 alarm group." + ::= { rupsMPW 10 } + +mpwPowerModule7AlarmGroup OBJECT-TYPE + SYNTAX INTEGER + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The power module 7 alarm group." + ::= { rupsMPW 11 } + +mpwBypassModuleStatus OBJECT-TYPE + SYNTAX INTEGER + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The bypass module status." + ::= { rupsMPW 12 } + +mpwPowerModule1Status OBJECT-TYPE + SYNTAX INTEGER + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The status of power module 1." + ::= { rupsMPW 13 } + +mpwPowerModule2Status OBJECT-TYPE + SYNTAX INTEGER + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The status of power module 2." + ::= { rupsMPW 14 } + +mpwPowerModule3Status OBJECT-TYPE + SYNTAX INTEGER + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The status of power module 3." + ::= { rupsMPW 15 } + +mpwPowerModule4Status OBJECT-TYPE + SYNTAX INTEGER + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The status of power module 4." + ::= { rupsMPW 16 } + +mpwPowerModule5Status OBJECT-TYPE + SYNTAX INTEGER + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The status of power module 5." + ::= { rupsMPW 17 } + +mpwPowerModule6Status OBJECT-TYPE + SYNTAX INTEGER + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The status of power module 6." + ::= { rupsMPW 18 } + +mpwPowerModule7Status OBJECT-TYPE + SYNTAX INTEGER + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The status of power module 7." + ::= { rupsMPW 19 } + +mpwControl OBJECT IDENTIFIER ::= { rupsMPW 20 } + +mpwCommandCode OBJECT-TYPE + SYNTAX INTEGER + + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Command code." + ::= { mpwControl 1 } + +mpwShutdownDelay OBJECT-TYPE + SYNTAX INTEGER + + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Shutdown delay." + ::= { mpwControl 2 } + +mpwRestoreDelay OBJECT-TYPE + SYNTAX INTEGER + + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Restore delay." + ::= { mpwControl 3 } + +mpwModuleApplyCommand OBJECT-TYPE + SYNTAX INTEGER + + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Module apply command" + ::= { mpwControl 4 } + +mpwCommandResult OBJECT-TYPE + SYNTAX INTEGER -- UNITS RMS Volts + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Result of command." + ::= { mpwControl 5 } + + +rupsTraps OBJECT IDENTIFIER ::= { rupsMIB 2 } + +rupsTrapOnBattery TRAP-TYPE + ENTERPRISE rupsTraps + VARIABLES { rupsEstimatedMinutesRemaining, rupsSecondsOnBattery, +rupsConfigLowBattTime } + DESCRIPTION + "The UPS is operating on battery power. This trap is + persistent and is resent at one minute intervals until + the UPS either turns off or is no longer running on + battery." + ::= 1 + +rupsTrapTestCompleted TRAP-TYPE + ENTERPRISE rupsTraps + DESCRIPTION + "This trap is sent upon completion of a UPS diagnostic + test." + ::= 2 + +rupsTrapAlarmEntryAdded TRAP-TYPE + ENTERPRISE rupsTraps + DESCRIPTION + "This trap is sent each time an alarm is inserted into + to the alarm table. It is sent on the insertion of + + all alarms except for rupsAlarmOnBattery and + rupsAlarmTestInProgress." + ::= 3 + +rupsTrapAlarmEntryRemoved TRAP-TYPE + ENTERPRISE rupsTraps + DESCRIPTION + "This trap is sent each time an alarm is removed from + the alarm table. It is sent on the removal of all + alarms except for rupsAlarmTestInProgress." + ::= 4 + + +END + diff --git a/MIBS/riello/SENSORTRAP-MIB b/MIBS/riello/SENSORTRAP-MIB new file mode 100644 index 0000000..768222e --- /dev/null +++ b/MIBS/riello/SENSORTRAP-MIB @@ -0,0 +1,97 @@ +-- IRMS-MIB { iso org(3) dod(6) internet(1) private(4) +-- enterprises(1) riello(5491) } + +SENSORTRAP-MIB DEFINITIONS ::= BEGIN + +-- Title: SENSOR TRAP MIB +-- Version: 1.0 by Michele Marcon +-- Date: 02.11.2009 + +IMPORTS + enterprises + FROM RFC1155-SMI + OBJECT-TYPE + FROM RFC-1212 + TRAP-TYPE + FROM RFC-1215; + + +rielloMIB OBJECT IDENTIFIER ::= { enterprises 5491 } + +sensorgroup OBJECT IDENTIFIER ::= { rielloMIB 9 } + +sensor OBJECT IDENTIFIER ::= { sensorgroup 1 } + +sensorId OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of the sensor." + ::= { sensor 1 } + +sensorTrapGroup OBJECT IDENTIFIER ::= { sensor 2 } + + +sensorAlarmTMax TRAP-TYPE + ENTERPRISE sensorTrapGroup + VARIABLES { sensorId } + DESCRIPTION "This trap is sent each minute when temperature reaches maximum level" + ::= 1 + +sensorAlarmTMaxRemoved TRAP-TYPE + ENTERPRISE sensorTrapGroup + VARIABLES { sensorId } + DESCRIPTION "This trap is sent when temperature returns to standard level" + ::= 2 + +sensorAlarmTMin TRAP-TYPE + ENTERPRISE sensorTrapGroup + VARIABLES { sensorId } + DESCRIPTION "This trap is sent each minute when temperature reaches minimum level" + ::= 3 + +sensorAlarmTMinRemoved TRAP-TYPE + ENTERPRISE sensorTrapGroup + VARIABLES { sensorId } + DESCRIPTION "This trap is sent when temperature returns to standard level" + ::= 4 + +sensorIOAlarm TRAP-TYPE + ENTERPRISE sensorTrapGroup + VARIABLES { sensorId } + DESCRIPTION "This trap is sent each minute when input contact is in alarm" + ::= 5 + +sensorIOAlarmRemoved TRAP-TYPE + ENTERPRISE sensorTrapGroup + VARIABLES { sensorId } + DESCRIPTION "This trap is sent when input contact is normal" + ::= 6 + +sensorHumidityAlarm TRAP-TYPE + ENTERPRISE sensorTrapGroup + VARIABLES { sensorId } + DESCRIPTION "This trap is sent each minute when humidity reaches maximum level" + ::= 7 + +sensorHumidityAlarmRemoved TRAP-TYPE + ENTERPRISE sensorTrapGroup + VARIABLES { sensorId } + DESCRIPTION "This trap is sent when humidity returns to normal level" + ::= 8 + +sensorHumidityLowAlarm TRAP-TYPE + ENTERPRISE sensorTrapGroup + VARIABLES { sensorId } + DESCRIPTION "This trap is sent each minute when humidity reaches minimum level" + ::= 9 + +sensorHumidityLowAlarmRemoved TRAP-TYPE + ENTERPRISE sensorTrapGroup + VARIABLES { sensorId } + DESCRIPTION "This trap is sent when humidity returns to normal level" + ::= 10 + +END + -- cgit v1.2.3