From 98a672123c7872f6b9b75a9a2b6bb3aea504de6a Mon Sep 17 00:00:00 2001 From: David Leutgeb Date: Tue, 5 Dec 2023 12:25:34 +0100 Subject: Initial commit --- MIBS/nokia/aos7/ALCATEL-IND1-CONFIG-MGR-MIB | 1701 +++++++++++++++++++++++++++ 1 file changed, 1701 insertions(+) create mode 100644 MIBS/nokia/aos7/ALCATEL-IND1-CONFIG-MGR-MIB (limited to 'MIBS/nokia/aos7/ALCATEL-IND1-CONFIG-MGR-MIB') diff --git a/MIBS/nokia/aos7/ALCATEL-IND1-CONFIG-MGR-MIB b/MIBS/nokia/aos7/ALCATEL-IND1-CONFIG-MGR-MIB new file mode 100644 index 0000000..c38831d --- /dev/null +++ b/MIBS/nokia/aos7/ALCATEL-IND1-CONFIG-MGR-MIB @@ -0,0 +1,1701 @@ +ALCATEL-IND1-CONFIG-MGR-MIB DEFINITIONS ::= BEGIN + + + IMPORTS + OBJECT-TYPE, + MODULE-IDENTITY, + OBJECT-IDENTITY, + Integer32 FROM SNMPv2-SMI + SnmpAdminString FROM SNMP-FRAMEWORK-MIB + MODULE-COMPLIANCE, + OBJECT-GROUP FROM SNMPv2-CONF + softentIND1Confmgr FROM ALCATEL-IND1-BASE + VirtualOperChassisId FROM ALCATEL-IND1-VIRTUAL-CHASSIS-MIB + ; + + + + alcatelIND1ConfigMgrMIB MODULE-IDENTITY + LAST-UPDATED "200704030000Z" + ORGANIZATION "Alcatel-Lucent" + CONTACT-INFO + "Please consult with Customer Service to ensure the most appropriate + version of this document is used with the products in question: + + Alcatel-Lucent, Enterprise Solutions Division + (Formerly Alcatel Internetworking, Incorporated) + 26801 West Agoura Road + Agoura Hills, CA 91301-5122 + United States Of America + + Telephone: North America +1 800 995 2696 + Latin America +1 877 919 9526 + Europe +31 23 556 0100 + Asia +65 394 7933 + All Other +1 818 878 4507 + + Electronic Mail: support@ind.alcatel.com + World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise + File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs" + + DESCRIPTION + "This module describes an authoritative enterprise-specific Simple + Network Management Protocol (SNMP) Management Information Base (MIB): + + For the Birds Of Prey Product Line + Configuration Manager Subsystem. + + The right to make changes in specification and other information + contained in this document without prior notice is reserved. + + No liability shall be assumed for any incidental, indirect, special, or + consequential damages whatsoever arising from or related to this + document or the information contained herein. + + Vendors, end-users, and other interested parties are granted + non-exclusive license to use this specification in connection with + management of the products for which it is intended to be used. + + Copyright (C) 1995-2007 Alcatel-Lucent + ALL RIGHTS RESERVED WORLDWIDE" + + REVISION "200704030000Z" + DESCRIPTION + "The latest version of this MIB Module." + + ::= { softentIND1Confmgr 1} + + + alcatelIND1ConfigMgrMIBObjects OBJECT-IDENTITY + STATUS current + DESCRIPTION + "Branch For Configuration Manager Subsystem Managed Objects." + ::= { alcatelIND1ConfigMgrMIB 1 } + + + alcatelIND1ConfigMgrMIBConformance OBJECT-IDENTITY + STATUS current + DESCRIPTION + "Branch For Configuration Manager Subsystem Conformance Information." + ::= { alcatelIND1ConfigMgrMIB 2 } + + + alcatelIND1ConfigMgrMIBGroups OBJECT-IDENTITY + STATUS current + DESCRIPTION + "Branch For Configuration Manager Subsystem Units Of Conformance." + ::= { alcatelIND1ConfigMgrMIBConformance 1 } + + + alcatelIND1ConfigMgrMIBCompliances OBJECT-IDENTITY + STATUS current + DESCRIPTION + "Branch For Configuration Manager Subsystem Compliance Statements." + ::= { alcatelIND1ConfigMgrMIBConformance 2 } + + +-- +-- Configuration Manager +-- + + configManager OBJECT IDENTIFIER ::= { alcatelIND1ConfigMgrMIBObjects 1 } + + + configFileName OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..45)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The name of the configuration file to be + read by the device. The file specified + should be present on the device." + DEFVAL { "" } + ::= { configManager 1 } + + + configFileAction OBJECT-TYPE + SYNTAX INTEGER { + none(1), + checkSyntaxOnly(2), + apply(3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Triggers application of the configuration + file specified by the configInputFileName. + A value of checkSyntax causes configInputFile + to be checked for syntax, with no changes to + device configuration. A value of + checkSyntaxAndApply causes the configInputFile + to be applied to the device configuration.A value + of none indicates no action has been triggered." + DEFVAL { none } + ::= { configManager 2 } + + + configErrorFileName OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The name of the file containing the error + messages generated by the device during file + configuration." + DEFVAL { "" } + ::= { configManager 3 } + + + configFileStatus OBJECT-TYPE + SYNTAX INTEGER { + noneAvail(1), + inProgress(2), + completeNoErrors(3), + completeErrors(4) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Status of most recent application of configuration + file to the device." + DEFVAL { noneAvail } + ::= { configManager 4 } + + + configFileMode OBJECT-TYPE + SYNTAX INTEGER { + none(1), + verbose(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The verbose mode displays all configuration commands + and errors when the file is applied on the console + screen. Ignored unless set from command line interface." + DEFVAL { none } + ::= { configManager 5 } + + + configTimerFileName OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..45)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The name of the configuration file to be read later + by the device." + DEFVAL { "" } + ::= { configManager 6 } + + + configTimerFileTime OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..16)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The local time when the configuration file + will be read by the device. This object is + only set if the configInputFile must be applied + at a later time. + The following formats are valid: + + MM/DD/YYYY hh:mm + + MM/DD/YY hh:mm + + MM/DD hh:mm - uses current year if + after current date and time, + next year otherwise. + + hh:mm - uses today's date if later + than current time, + tommorow's date otherwise. + where + YY - year (0-38,99) + MM - month (1-12) + DD - day (1-31) + hh - hour (0-23) + mm - minute (0-59)" + DEFVAL { "" } + ::= { configManager 7 } + + + configTimerFileStatus OBJECT-TYPE + SYNTAX INTEGER { + idle(1), + pending(2), + inProgress(3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current status of the ASCII configuration + timer." + DEFVAL { idle } + ::= { configManager 8 } + + + configTimerClear OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes the ASCII + configuration timer to be cleared." + DEFVAL { 0 } + ::= { configManager 9 } + + + configSnapshotFileName OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..45)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The name of the configuration snap-shot file + to be generated by the device." + DEFVAL { "" } + ::= { configManager 10 } + + + configSnapshotAction OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes the configuration + snap-shot to be generated by the device." + DEFVAL { 0 } + ::= { configManager 11 } + + + configSnapshotAllSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + all application configuration data to be + included in the snap-shot file generated by + the device." + DEFVAL { 0 } + ::= { configManager 12 } + + + configSnapshotVlanSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + Vlan configuration data to be + included in the snap-shot file generated by + the device." + DEFVAL { 0 } + ::= { configManager 13 } + + + configSnapshotSpanningTreeSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + Spanning Tree configuration data to be + included in the snap-shot file generated by + the device." + DEFVAL { 0 } + ::= { configManager 14 } + + + configSnapshotQOSSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + QOS configuration data to be included + in the snap-shot file generated by the + the device." + DEFVAL { 0 } + ::= { configManager 15 } + + + configSnapshotIPSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + IP configuration data to be included + in the snap-shot file generated by the + the device." + DEFVAL { 0 } + ::= { configManager 16 } + + + configSnapshotIPXSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + IPX configuration data to be included + in the snap-shot file generated by the + the device." + DEFVAL { 0 } + ::= { configManager 17 } + + + configSnapshotIPMSSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + IPMS configuration data to be included + in the snap-shot file generated by the + the device." + DEFVAL { 0 } + ::= { configManager 18 } + + configSnapshotAAASelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + AAA configuration data to be included + in the snap-shot file generated by the + the device." + DEFVAL { 0 } + ::= { configManager 19 } + + + configSnapshotSNMPSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + SNMP configuration data to be included + in the snap-shot file generated by the + the device." + DEFVAL { 0 } + ::= { configManager 20 } + + + configSnapshot8021QSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + 802.1Q configuration data to be included + in the snap-shot file generated by the + the device." + DEFVAL { 0 } + ::= { configManager 21 } + + + configSnapshotLinkAggregateSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + link aggregation configuration data to + be included in the snap-shot file generated + by the device." + DEFVAL { 0 } + ::= { configManager 22 } + + + configSnapshotPortMirrorSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + port mirroring configuration data to + be included in the snap-shot file generated + by the device." + DEFVAL { 0 } + ::= { configManager 23 } + + + configSnapshotXIPSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + proprietary inter-switch protocol configuration + data to be included in the snap-shot file generated + by the device." + DEFVAL { 0 } + ::= { configManager 24 } + + + configSnapshotHealthMonitorSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + health monitoring configuration data to + be included in the snap-shot file generated + by the device." + DEFVAL { 0 } + ::= { configManager 25 } + + + configSnapshotBootPSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + bootp configuration data to + be included in the snap-shot file generated + by the device." + DEFVAL { 0 } + ::= { configManager 26 } + + + configSnapshotBridgeSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + source-learning configuration data to + be included in the snap-shot file generated + by the device." + DEFVAL { 0 } + ::= { configManager 27 } + + + configSnapshotChassisSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + the chassis configuration data to + be included in the snap-shot file generated + by the device." + DEFVAL { 0 } + ::= { configManager 28 } + + + configSnapshotInterfaceSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + ethernet interface configuration data to + be included in the snap-shot file generated + by the device." + DEFVAL { 0 } + ::= { configManager 29 } + + + configSnapshotPolicySelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + policy manager configuration data to + be included in the snap-shot file generated + by the device." + DEFVAL { 0 } + ::= { configManager 30 } + + + configSnapshotSessionSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + the user-session configuration data to + be included in the snap-shot file generated + by the device." + DEFVAL { 0 } + ::= { configManager 31 } + + + configSnapshotServerLoadBalanceSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + server load balancing configuration data to + be included in the snap-shot file generated + by the device." + DEFVAL { 0 } + ::= { configManager 32 } + + + configSnapshotSystemServiceSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + system services configuration data to + be included in the snap-shot file generated + by the device." + DEFVAL { 0 } + ::= { configManager 33 } + + + configSnapshotVRRPSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + VRRP configuration data to + be included in the snap-shot file generated + by the device." + DEFVAL { 0 } + ::= { configManager 34 } + + + configSnapshotWebSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + web manager configuration data to + be included in the snap-shot file generated + by the device." + DEFVAL { 0 } + ::= { configManager 35 } + + + configSnapshotRIPSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + RIP configuration data to + be included in the snap-shot file generated + by the device." + DEFVAL { 0 } + ::= { configManager 36 } + + + configSnapshotOSPFSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + OSPF configuration data to + be included in the snap-shot file generated + by the device." + DEFVAL { 0 } + ::= { configManager 37 } + + + configSnapshotBGPSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + BGP configuration data to + be included in the snap-shot file generated + by the device." + DEFVAL { 0 } + ::= { configManager 38 } + + + configSnapshotIPRMSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + IPRM routing configuration data to + be included in the snap-shot file generated + by the device." + DEFVAL { 0 } + ::= { configManager 39 } + + + configSnapshotIPMRSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + IP multicast routing configuration data to + be included in the snap-shot file generated + by the device." + DEFVAL { 0 } + ::= { configManager 40 } + + + configSnapshotModuleSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + module configuration data to + be included in the snap-shot file generated + by the device." + DEFVAL { 0 } + ::= { configManager 41 } + + configTechSupportLogAction OBJECT-TYPE + SYNTAX INTEGER { + notSignificant(0), + techSupportBasic(1), + techSupportL2(2), + techSupportL3(3), + techSupportL3Rip(4), + techSupportL3Ipx(5), + techSupportL3Ospf(6), + techSupportL3Bgp(7), + techSupportL3Pimsm(8), + techSupportL3Mroute(9), + techSupportL3Dvmrp(10), + techSupportL3IPv6(11), + techSupportL3RIPng(12), + techSupportL3OSPF3(13), + techSupportL3Isis(14), + techSupportL3Pim6(15), + techSupportL3IPsec(16), + techSupportL3Bfd(17) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + a tech_support.log file to be created + containing switch information useful to + a technical support group." + DEFVAL { techSupportBasic } + ::= { configManager 42 } + + configWriteMemory OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + the entire switch snap-shot configuration to + be stored in the boot.cfg file in the + current running directory." + DEFVAL { 0 } + ::= { configManager 43 } + + configErrorFileMaximum OBJECT-TYPE + SYNTAX Integer32 (1..25) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The maximum number of error files which may be + present on a switch. Each time a new error file + is created, all but the newest configErrorFileMaxNum + error files are deleted." + DEFVAL { 1 } + ::= { configManager 44 } + + configChangeStatus OBJECT-TYPE + SYNTAX INTEGER { + identical(1), + different(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current state of the running configuration with respect + to the saved configuration." + DEFVAL { identical } + ::= { configManager 45 } + + configSnapshotRDPSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + RDP configuration data to + be included in the snap-shot file generated + by the device." + DEFVAL { 0 } + ::= { configManager 46 } + + configSnapshotIPv6Select OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + IPv6 configuration data to + be included in the snap-shot file generated + by the device." + DEFVAL { 0 } + ::= { configManager 47 } + + configSnapshotRIPngSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + RIPng configuration data to + be included in the snap-shot file generated + by the device." + DEFVAL { 0 } + ::= { configManager 48 } + + configSnapshotAtmSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + ATM configuration data to + be included in the snap-shot file generated + by the device. NOT SUPPORTED." + DEFVAL { 0 } + ::= { configManager 49 } + + + configSnapshotSonetSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + Sonet configuration data to + be included in the snap-shot file generated + by the device. NOT SUPPORTED." + DEFVAL { 0 } + ::= { configManager 50 } + + configSnapshotNTPSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + NTP configuration data to + be included in the snap-shot file generated + by the device." + DEFVAL { 0 } + ::= { configManager 51 } + + + configSnapshotPortMappingSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + Port Mapping configuration data to + be included in the snap-shot file generated + by the device." + DEFVAL { 0 } + ::= { configManager 52 } + + + configSnapshotOSPF3Select OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + OSPF3 configuration data to + be included in the snap-shot file generated + by the device." + DEFVAL { 0 } + ::= { configManager 53 } + + + configWriteMemoryStatus OBJECT-TYPE + SYNTAX INTEGER { + noneAvail(1), + inProgress(2), + completeNoErrors(3), + completeErrors(4) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Status of most recent wwrite memory action." + DEFVAL { noneAvail } + ::= { configManager 54 } + + + configSnapshotStackSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + STack Manager configuration data to + be included in the snap-shot file generated + by the device." + DEFVAL { 0 } + ::= { configManager 55 } + + configSnapshotISISSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + ISIS configuration data to + be included in the snap-shot file generated + by the device." + DEFVAL { 0 } + ::= { configManager 56 } + + + configSnapshotEOAMSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + Ethernet OAM configuration data to + be included in the snap-shot file generated + by the device." + DEFVAL { 0 } + ::= { configManager 57 } + + + configSnapshotUDLDSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + UDLD configuration data to + be included in the snap-shot file generated + by the device." + DEFVAL { 0 } + ::= { configManager 58 } + + configSnapshotNETSECSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + NETSEC configuration data to + be included in the snap-shot file generated + by the device." + DEFVAL { 0 } + ::= { configManager 59 } + + configSnapshotIPsecSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + IP Security configuration data to + be included in the snap-shot file generated + by the device." + DEFVAL { 0 } + ::= { configManager 60 } + + configSnapshotBFDSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + BFD configuration data to + be included in the snap-shot file generated + by the device." + DEFVAL { 0 } + ::= { configManager 61 } + + configSnapshotMultiChassisSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + MCM configuration data to + be included in the snap-shot file generated + by the device." + DEFVAL { 0 } + ::= { configManager 62 } + + configSnapshotErpSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + ERP configuration data to + be included in the snap-shot file generated + by the device." + DEFVAL { 0 } + ::= { configManager 63 } + + configSnapshotMPLSSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + MPLS configuration data to + be included in the snap-shot file generated + by the device." + DEFVAL { 0 } + ::= { configManager 64 } + + configSnapshotEFMOAMSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + EFMOAM configuration data to + be included in the snap-shot file generated + by the device." + DEFVAL { 0 } + ::= { configManager 65} + + configSnapshotCapabilitySelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + capability manager configuration data to + be included in the snap-shot file generated + by the device." + DEFVAL { 0 } + ::= { configManager 66 } + + configSnapshotVfcSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + VFC configuration data to + be included in the snap-shot file generated + by the device." + DEFVAL { 0 } + ::= { configManager 67 } + + configSnapshotHaVlanSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + HA VLAN configuration data to + be included in the snap-shot file generated + by the device." + DEFVAL { 0 } + ::= { configManager 68 } + + configSnapshotDaUnpSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + DA UNP configuration data to + be included in the snap-shot file generated + by the device." + DEFVAL { 0 } + ::= { configManager 69 } + + configSnapshotDHLSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + DHL configuration data to + be included in the snap-shot file generated + by the device." + DEFVAL { 0 } + ::= { configManager 70 } + + configSnapshotMVRPSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + MVRP configuration data to + be included in the snap-shot file generated + by the device." + DEFVAL { 0 } + ::= { configManager 71 } + + configSnapshotSAASelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + SAA configuration data to + be included in the snap-shot file generated + by the device." + DEFVAL { 0 } + ::= { configManager 72 } + + configSnapshotSPBSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + SPB configuration data to + be included in the snap-shot file generated + by the device." + DEFVAL { 0 } + ::= { configManager 73 } + + configSnapshotSPBIsisSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + SPB ISIS configuration data to + be included in the snap-shot file generated + by the device." + DEFVAL { 0 } + ::= { configManager 74 } + + configSnapshotVirtualChassisSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes VCM configuration + data to be included in the snap-shot file + generated by the device. A set of this object + is only valid in standalone mode" + DEFVAL { 0 } + ::= { configManager 75 } + + configSnapshotMplsLdpSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + MPLS LDP configuration data to + be included in the snap-shot file generated + by the device." + DEFVAL { 0 } + ::= { configManager 76 } + + configSnapshotVCMSpecific OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + VCM configuration data for the chassis + specified by configSnapshotChassisId to + be included in the snap-shot file generated + by the device A set of this object is only + valid in virtual chassis mode." + DEFVAL { 0 } + ::= { configManager 77 } + + configSnapshotChassisId OBJECT-TYPE + SYNTAX VirtualOperChassisId + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object in combination with + configSnapshotVCMSpecific causes + VCM configuration data for the specified + chassis to be included in the snap-shot + file generated by the device. A set of + this object is only valid in virtual + chassis mode." + DEFVAL { 0 } + ::= { configManager 78 } + + configSnapshotEvbSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + EVB configuration data to + be included in the snap-shot file generated + by the device." + DEFVAL { 0 } + ::= { configManager 79 } + + configConvertConfiguration OBJECT-TYPE + SYNTAX INTEGER { + notSignificant(0), + virtualChassis(1) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object to virtualChassis is only valid in + standalone mode and causes a virtual chassis snapshot to be + generated from the running configuration. The resulting + vcsetup.cfg and vcboot.cfg files are stored in the directory + specified by configConvertDestinationDirectory. If no directory + is specified the running directory will be used provided the + running directory is not the certified directory." + DEFVAL { notSignificant } + ::= { configManager 80 } + + configConvertConfigurationStatus OBJECT-TYPE + SYNTAX INTEGER { + noneAvail(1), + inProgress(2), + completeNoErrors(3), + completeErrors(4) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Status of most recent convert configuration action." + DEFVAL { noneAvail } + ::= { configManager 81 } + + configConvertDestinationDirectory OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..45)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The destination directory for the files created by the action + of setting the configConvertConfiguration object." + DEFVAL { "" } + ::= { configManager 82 } + + configConvertReload OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object will initiate a reboot of the + switch as part of the configConvertConfiguration + action." + DEFVAL { 0 } + ::= { configManager 83 } + + configSnapshotAppfpSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + Application Finger Print configuration data to + be included in the snap-shot file generated + by the device." + DEFVAL { 0 } + ::= { configManager 84 } + + configSnapshotFipsSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + FIP Snooping configuration data to + be included in the snap-shot file generated + by the device." + DEFVAL { 0 } + ::= { configManager 85 } + + configSnapshotLFPSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + LFP configuration data to + be included in the snap-shot file generated + by the device." + DEFVAL { 0 } + ::= { configManager 86 } + + configSnapshotPmInterfaceSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + Port Manager Interfaceconfiguration data to + be included in the snap-shot file generated + by the device." + DEFVAL { 0 } + ::= { configManager 87 } + + configSnapshotAutofabricSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + Autofabric configuration data to + be included in the snap-shot file generated + by the device." + DEFVAL { 0 } + ::= { configManager 88 } + + configSnapshotDhcpv6RelaySelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + DHCPv6 Relay configuration data to + be included in the snap-shot file generated + by the device." + DEFVAL { 0 } + ::= { configManager 89 } + + configSnapshotSIPSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + Autofabric configuration data to + be included in the snap-shot file generated + by the device." + DEFVAL { 0 } + ::= { configManager 90 } + + configSnapshotOpenflowSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + Openflow configuration data to + be included in the snap-shot file generated + by the device." + DEFVAL { 0 } + ::= { configManager 91 } + + configSnapshotWlanSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + Wlan configuration data to + be included in the snap-shot file generated + by the device." + DEFVAL { 0 } + ::= { configManager 92 } + + configSnapshotDhcpSrvSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + DhcpSrv configuration data to + be included in the snap-shot file generated + by the device." + DEFVAL { 0 } + ::= { configManager 93 } + + configSnapshotDPISelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + Dpi configuration data to + be included in the snap-shot file generated + by the device." + DEFVAL { 0 } + ::= { configManager 94 } + + configSnapshotMsgSrvSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + MsgSrv configuration data to + be included in the snap-shot file generated + by the device." + DEFVAL { 0 } + ::= { configManager 95 } + + configSnapshotAlSrvSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + ActiveLeaseSrv configuration data to + be included in the snap-shot file generated + by the device." + DEFVAL { 0 } + ::= { configManager 96 } + + configSnapshotDhcpv6SrvSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + Dhcp6Srv configuration data to + be included in the snap-shot file generated + by the device." + DEFVAL { 0 } + ::= { configManager 97 } + + configSnapshotAGSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + AG configuration data to be included + in the snap-shot file generated by the + the device." + DEFVAL { 0 } + ::= { configManager 98 } + + configSnapshotQMRSelect OBJECT-TYPE + + + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + QMR configuration data to be included + in the snap-shot file generated by the + the device." + DEFVAL { 0 } + ::= { configManager 99 } + + configSnapshotVCSPSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + VCSP configuration data to + be included in the snap-shot file generated + by the device." + DEFVAL { 0 } + ::= { configManager 100 } + + configSnapshotDhcpSnoopingSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + DHCP SNOOPING configuration data to + be included in the snap-shot file generated + by the device." + DEFVAL { 0 } + ::= { configManager 101 } + + configSnapshotAppMonSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + Application Monitoring configuration data to + be included in the snap-shot file generated + by the device." + DEFVAL { 0 } + ::= { configManager 102 } + + configSnapshotLbdSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + Loopback Detection configuration data to + be included in the snap-shot file generated + by the device." + DEFVAL { 0 } + ::= { configManager 103 } + + configSnapshotVMSnoopSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + VM Snooping configuration data to + be included in the snap-shot file generated + by the device." + DEFVAL { 0 } + ::= { configManager 104 } + + configSnapshotPppoeIaSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + PPPoE-IA configuration data to + be included in the snap-shot file generated + by the device." + DEFVAL { 0 } + ::= { configManager 105} + + configSnapshotPmPortViolationSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + Port Violation configuration data to + be included in the snap-shot file generated + by the device." + DEFVAL { 0 } + ::= { configManager 106} + + configSnapshotLanPowerSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + Lan Power configuration data to + be included in the snap-shot file generated + by the device." + DEFVAL { 0 } + ::= { configManager 107} + + configSnapshotPVLANSelect OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of this object causes + Private VLAN(PVLAN) configuration data to + be included in the snap-shot file generated + by the device." + DEFVAL { 0 } + ::= { configManager 108 } + +-- +-- Compliance Statements +-- + + alcatelIND1ConfigMgrMIBCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "Compliance statement for Configuration Manager Subsystem." + MODULE -- this module + + MANDATORY-GROUPS + { + configFileGroup, + configTimerFileGroup, + configSnapshotGroup, + configTechSupportLogGroup, + configWriteMemoryGroup, + configConvertConfigurationGroup + } + + ::= { alcatelIND1ConfigMgrMIBCompliances 1 } + + +-- +-- Units of Conformance +-- + + configFileGroup OBJECT-GROUP + OBJECTS + { + configFileName, + configFileAction, + configErrorFileName, + configFileStatus, + configFileMode, + configErrorFileMaximum, + configChangeStatus + } + STATUS current + DESCRIPTION + "Collection of objects for file configuration." + ::= { alcatelIND1ConfigMgrMIBGroups 1} + + + configTimerFileGroup OBJECT-GROUP + OBJECTS + { + configTimerFileName, + configTimerFileTime, + configTimerFileStatus, + configTimerClear, + configSnapshotFileName + } + STATUS current + DESCRIPTION + "Collection of objects for timer file configuration." + ::= { alcatelIND1ConfigMgrMIBGroups 2} + + + configSnapshotGroup OBJECT-GROUP + OBJECTS + { + configSnapshotAction, + configSnapshotAllSelect, + configSnapshotVCMSpecific, + configSnapshotChassisId, + configSnapshotVlanSelect, + configSnapshotSpanningTreeSelect, + configSnapshotQOSSelect, + configSnapshotIPSelect, + configSnapshotIPXSelect, + configSnapshotIPMSSelect, + configSnapshotAAASelect, + configSnapshotSNMPSelect, + configSnapshot8021QSelect, + configSnapshotLinkAggregateSelect, + configSnapshotPortMirrorSelect, + configSnapshotXIPSelect, + configSnapshotHealthMonitorSelect, + configSnapshotBootPSelect, + configSnapshotBridgeSelect, + configSnapshotChassisSelect, + configSnapshotInterfaceSelect, + configSnapshotPolicySelect, + configSnapshotSessionSelect, + configSnapshotServerLoadBalanceSelect, + configSnapshotSystemServiceSelect, + configSnapshotVRRPSelect, + configSnapshotWebSelect, + configSnapshotRIPSelect, + configSnapshotOSPFSelect, + configSnapshotBGPSelect, + configSnapshotIPRMSelect, + configSnapshotIPMRSelect, + configSnapshotModuleSelect, + configSnapshotRDPSelect, + configSnapshotIPv6Select, + configSnapshotRIPngSelect, + configSnapshotAtmSelect, + configSnapshotSonetSelect, + configSnapshotNTPSelect, + configSnapshotPortMappingSelect, + configSnapshotOSPF3Select, + configSnapshotStackSelect, + configWriteMemoryStatus, + configSnapshotISISSelect, + configSnapshotEOAMSelect, + configSnapshotUDLDSelect, + configSnapshotNETSECSelect, + configSnapshotIPsecSelect, + configSnapshotBFDSelect, + configSnapshotMultiChassisSelect, + configSnapshotEFMOAMSelect, + configSnapshotMPLSSelect, + configSnapshotErpSelect, + configSnapshotCapabilitySelect, + configSnapshotVfcSelect, + configSnapshotHaVlanSelect, + configSnapshotDaUnpSelect, + configSnapshotDHLSelect, + configSnapshotMVRPSelect, + configSnapshotSAASelect, + configSnapshotSPBSelect, + configSnapshotSPBIsisSelect, + configSnapshotVirtualChassisSelect, + configSnapshotMplsLdpSelect, + configSnapshotEvbSelect, + configSnapshotAppfpSelect, + configSnapshotFipsSelect, + configSnapshotLFPSelect, + configSnapshotPmInterfaceSelect, + configSnapshotAutofabricSelect, + configSnapshotDhcpv6RelaySelect, + configSnapshotSIPSelect, + configSnapshotOpenflowSelect, + configSnapshotWlanSelect, + configSnapshotDhcpSrvSelect, + configSnapshotDPISelect, + configSnapshotMsgSrvSelect, + configSnapshotAlSrvSelect, + configSnapshotDhcpv6SrvSelect, + configSnapshotAGSelect, + configSnapshotQMRSelect, + configSnapshotVCSPSelect, + configSnapshotDhcpSnoopingSelect, + configSnapshotAppMonSelect, + configSnapshotVMSnoopSelect, + configSnapshotLbdSelect, + configSnapshotPppoeIaSelect, + configSnapshotPmPortViolationSelect, + configSnapshotLanPowerSelect, + configSnapshotPVLANSelect + } + STATUS current + DESCRIPTION + "Collection of objects for snapshot configuration." + ::= { alcatelIND1ConfigMgrMIBGroups 3} + + + configTechSupportLogGroup OBJECT-GROUP + OBJECTS + { + configTechSupportLogAction + } + STATUS current + DESCRIPTION + "Collection of objects for technical support log file." + ::= { alcatelIND1ConfigMgrMIBGroups 4} + + + configWriteMemoryGroup OBJECT-GROUP + OBJECTS + { + configWriteMemory + } + STATUS current + DESCRIPTION + "Collection of objects for write memory." + ::= { alcatelIND1ConfigMgrMIBGroups 5} + + + configConvertConfigurationGroup OBJECT-GROUP + OBJECTS + { + configConvertConfiguration, + configConvertConfigurationStatus, + configConvertDestinationDirectory, + configConvertReload + } + STATUS current + DESCRIPTION + "Collection of objects for write memory." + ::= { alcatelIND1ConfigMgrMIBGroups 6} + + + +END -- cgit v1.2.3