From 98a672123c7872f6b9b75a9a2b6bb3aea504de6a Mon Sep 17 00:00:00 2001 From: David Leutgeb Date: Tue, 5 Dec 2023 12:25:34 +0100 Subject: Initial commit --- MIBS/linksys/LINKSYS-MNGINF-MIB | 302 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 302 insertions(+) create mode 100644 MIBS/linksys/LINKSYS-MNGINF-MIB (limited to 'MIBS/linksys/LINKSYS-MNGINF-MIB') diff --git a/MIBS/linksys/LINKSYS-MNGINF-MIB b/MIBS/linksys/LINKSYS-MNGINF-MIB new file mode 100644 index 0000000..0d0554b --- /dev/null +++ b/MIBS/linksys/LINKSYS-MNGINF-MIB @@ -0,0 +1,302 @@ +LINKSYS-MNGINF-MIB DEFINITIONS ::= BEGIN + +-- Title: LINKSYS MNGINF ROS +-- This Private MIB supports the Management ACL for ROS +-- Version: 7.46 +-- Date: 20 Jan 2007 + + + +IMPORTS + rnd FROM LINKSYS-MIB + OBJECT-TYPE, IpAddress, Unsigned32, + MODULE-IDENTITY FROM SNMPv2-SMI + TEXTUAL-CONVENTION, DisplayString, + TruthValue, RowStatus FROM SNMPv2-TC + InetAddressType,InetAddress FROM INET-ADDRESS-MIB; -- RFC2851 + +rlMngInf MODULE-IDENTITY + LAST-UPDATED "200309210000Z" + ORGANIZATION "Linksys LLC." + CONTACT-INFO + "www.linksys.com/business/support" + DESCRIPTION + "The private MIB module definition for management access control." + REVISION "200309210000Z" + DESCRIPTION + "Changed IMPORTS, added this MODULE-IDENTITY clause and editorial changes." + ::= { rnd 89 } + +RlMngInfServiceType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Management ACL Service type" + SYNTAX INTEGER { + dontCare(0), + telnet(1), + snmp(2), + http(3), + https(4), + ssh(5) + } + +RlMngInfActionType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Management ACL Action definition." + SYNTAX INTEGER { + permit(0), + deny(1) + } + +rlMngInfMibVersion OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "MIB's version, the current version is 1." + ::= {rlMngInf 1} + +rlMngInfEnable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The variable specifies if Management ACL functionality is enabled." + ::= {rlMngInf 2} + +rlMngInfActiveListName OBJECT-TYPE + SYNTAX DisplayString (SIZE(0..32)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The currently activated Management ACL name" + ::= {rlMngInf 3} + +rlMngInfListTable OBJECT-TYPE + SYNTAX SEQUENCE OF RlMngInfListEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The table specifies all defined Access Lists definitions for IPv4 addresses. + Provide backward compatibility for previous versions." + ::= {rlMngInf 4} + +rlMngInfListEntry OBJECT-TYPE + SYNTAX RlMngInfListEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Row definition for this table." + INDEX { rlMngInfListName, rlMngInfListPriority } + ::= { rlMngInfListTable 1} + +RlMngInfListEntry ::= SEQUENCE { + rlMngInfListName DisplayString, + rlMngInfListPriority Unsigned32, + rlMngInfListIfIndex Unsigned32, + rlMngInfListIpAddr IpAddress, + rlMngInfListIpNetMask IpAddress, + rlMngInfListService RlMngInfServiceType, + rlMngInfListAction RlMngInfActionType, + rlMngInfListRowStatus RowStatus +} + +rlMngInfListName OBJECT-TYPE + SYNTAX DisplayString (SIZE(1..32)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Name of the Access List." + ::= { rlMngInfListEntry 1} + +rlMngInfListPriority OBJECT-TYPE + SYNTAX Unsigned32 (1..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Priority value." + ::= { rlMngInfListEntry 2} + +rlMngInfListIfIndex OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The IfIndex value. The IfIndex can be configured to be 0, which means don't care value." + ::= { rlMngInfListEntry 3} + +rlMngInfListIpAddr OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The IP address. The IP address can be configured to be 0, which means don't care value." + ::= { rlMngInfListEntry 4} + +rlMngInfListIpNetMask OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The subnet mask associated with the IP address of this entry. The value of the mask is + an IP address with all the network bits set to 1 and all the hosts bits set to 0." + ::= { rlMngInfListEntry 5} + +rlMngInfListService OBJECT-TYPE + SYNTAX RlMngInfServiceType + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Service type. The Service type address can be configured to be 0, + which means any of Telnet, SNMP, HTTP, HTTPS, SSH." + ::= { rlMngInfListEntry 6} + +rlMngInfListAction OBJECT-TYPE + SYNTAX RlMngInfActionType + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Action type. Can be permit or deny." + ::= { rlMngInfListEntry 7} + +rlMngInfListRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The row status variable, used according to + row installation and removal conventions." + ::= { rlMngInfListEntry 8} + +--- Management Interface auditing control (SysLog) + +rlMngInfAuditingEnable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Controls whether SysLog messages + should be issued on reject by rule" + DEFVAL { true } + ::= { rlMngInf 5 } + +rlMngInfListInetTable OBJECT-TYPE + SYNTAX SEQUENCE OF RlMngInfListInetEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The table specifies all defined Access Lists definitions definitions + for both IPv4 and IPv6 addresses." + ::= {rlMngInf 6} + +rlMngInfListInetEntry OBJECT-TYPE + SYNTAX RlMngInfListInetEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Row definition for this table." + INDEX { rlMngInfListInetName, rlMngInfListInetPriority } + ::= { rlMngInfListInetTable 1} + +RlMngInfListInetEntry ::= SEQUENCE { + rlMngInfListInetName DisplayString, + rlMngInfListInetPriority Unsigned32, + rlMngInfListInetIfIndex Unsigned32, + rlMngInfListInetIpAddrType InetAddressType, + rlMngInfListInetIpAddr InetAddress, + rlMngInfListInetIpNetMask IpAddress, + rlMngInfListInetService RlMngInfServiceType, + rlMngInfListInetAction RlMngInfActionType, + rlMngInfListInetRowStatus RowStatus, + rlMngInfListInetIPv6PrefixLength INTEGER +} + +rlMngInfListInetName OBJECT-TYPE + SYNTAX DisplayString (SIZE(1..32)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Name of the Access List." + ::= { rlMngInfListInetEntry 1} + +rlMngInfListInetPriority OBJECT-TYPE + SYNTAX Unsigned32 (1..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Priority value." + ::= { rlMngInfListInetEntry 2} + +rlMngInfListInetIfIndex OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The IfIndex value. The IfIndex can be configured to be 0, which means don't care value." + ::= { rlMngInfListInetEntry 3} + +rlMngInfListInetIpAddrType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The Inet address type." + ::= { rlMngInfListInetEntry 4} + +rlMngInfListInetIpAddr OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The Inet address.Used for both IPv4 and IPv6 addresses. + The InetIpAddress can be configured to be 0.0.0.0 and address type IPv4 , + which means ignored value." + ::= { rlMngInfListInetEntry 5} + +rlMngInfListInetIpNetMask OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This field will used in case of IPv4 addresses . For IPv6 this field ignored. + Default value 255.255.255.255." + ::= { rlMngInfListInetEntry 6} + +rlMngInfListInetService OBJECT-TYPE + SYNTAX RlMngInfServiceType + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Service type. The Service type address can be configured to be 0, + which means any of Telnet, SNMP, HTTP, HTTPS, SSH." + ::= { rlMngInfListInetEntry 7} + +rlMngInfListInetAction OBJECT-TYPE + SYNTAX RlMngInfActionType + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Action type. Can be permit or deny." + ::= { rlMngInfListInetEntry 8} + +rlMngInfListInetRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The row status variable, used according to + row installation and removal conventions." + ::= { rlMngInfListInetEntry 9} + +rlMngInfListInetIPv6PrefixLength OBJECT-TYPE + SYNTAX INTEGER (0.. 128) + MAX-ACCESS read-write + STATUS current + DESCRIPTION "IPv6 prefix length.This field provide IPv6 prefix length (mask) + for IPv6 only.In case of IPv4 this field will ignored" + DEFVAL { 128 } + ::= { rlMngInfListInetEntry 10} + +END + -- cgit v1.2.3