From 98a672123c7872f6b9b75a9a2b6bb3aea504de6a Mon Sep 17 00:00:00 2001 From: David Leutgeb Date: Tue, 5 Dec 2023 12:25:34 +0100 Subject: Initial commit --- MIBS/huawei/HUAWEI-LI-MIB | 897 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 897 insertions(+) create mode 100644 MIBS/huawei/HUAWEI-LI-MIB (limited to 'MIBS/huawei/HUAWEI-LI-MIB') diff --git a/MIBS/huawei/HUAWEI-LI-MIB b/MIBS/huawei/HUAWEI-LI-MIB new file mode 100644 index 0000000..eb28997 --- /dev/null +++ b/MIBS/huawei/HUAWEI-LI-MIB @@ -0,0 +1,897 @@ + +-- ================================================================== +-- Copyright (C) 2007 by HUAWEI TECHNOLOGIES. All rights reserved. +-- +-- Description: HUAWEI LI Management MIB HWAWEI-LI-MIB +-- Reference: +-- Version: V1.0 +-- History: +-- V1.0 s49159, 2007-06-10, publish +-- ================================================================== + + HUAWEI-LI-MIB DEFINITIONS ::= BEGIN + + IMPORTS + hwDatacomm + FROM HUAWEI-MIB + InetAddress, InetPortNumber, InetAddressType, InetAddressPrefixLength + FROM INET-ADDRESS-MIB + OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP + FROM SNMPv2-CONF + Integer32, Unsigned32, BITS, OBJECT-TYPE, MODULE-IDENTITY, + NOTIFICATION-TYPE + FROM SNMPv2-SMI + DateAndTime, MacAddress, RowStatus, TEXTUAL-CONVENTION + FROM SNMPv2-TC; + + hwLiMib MODULE-IDENTITY + LAST-UPDATED "200706270000Z" + ORGANIZATION + "hw Technologies co.,Ltd." + CONTACT-INFO + " R&D Meaning, huawei Technologies co.,Ltd. + Http://www.huawei.com + E-mail:support@huawei.com " + DESCRIPTION + "This module manages huawei's Lawful interception feature." + REVISION "200706270000Z" + DESCRIPTION + "Initial version of this MIB module." + ::= { hwDatacomm 131 } + + + +-- +-- Textual conventions +-- + + HWLiDscp ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "An integer that is in the range of the DiffServ codepoint + values." + SYNTAX Integer32 (0..63) + + +-- +-- Node definitions +-- + + + hwLiMibNotifs OBJECT IDENTIFIER ::= { hwLiMib 1 } + + + + hwLiMibActive NOTIFICATION-TYPE + STATUS current + DESCRIPTION + "This notification is sent when an intercepting router or switch is first + capable of intercepting a packet corresponding to a configured data stream. " + ::= { hwLiMibNotifs 1 } + + + hwLiX3HeartBeatAlarm NOTIFICATION-TYPE + OBJECTS { hwLiGatewayX3Address } + STATUS current + DESCRIPTION + "This notification is sent when an LIG is lost connection to the device + which intercepting packet corresponding to a configured data stream. " + ::= { hwLiMibNotifs 2 } + + + hwLiX3HeartBeatRecover NOTIFICATION-TYPE + OBJECTS { hwLiGatewayX3Address } + STATUS current + DESCRIPTION + "This notification is sent when an LIG is recover connection to the device + which intercepting packet corresponding to a configured data stream. " + ::= { hwLiMibNotifs 3 } + + + hwLiMibObjects OBJECT IDENTIFIER ::= { hwLiMib 2 } + + + + hwLiAgentObjects OBJECT IDENTIFIER ::= { hwLiMibObjects 1 } + + + + hwLiAgentTime OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The time of the LI agent.Read-only." + ::= { hwLiAgentObjects 1 } + + + + hwLiAgentEnable OBJECT-TYPE + SYNTAX INTEGER + { + enabled(1), + disabled(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The status of the LI agent.Read-only." + ::= { hwLiAgentObjects 2 } + + + + hwLiAgentX2IpAddress OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The IP address of the X2 interface in LI agent.Just can be read by server + and can be set in command line." + ::= { hwLiAgentObjects 3 } + + + hwLiAgentX2Port OBJECT-TYPE + SYNTAX InetPortNumber + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Port of the X2 interface in LI agent.Just can be read by server + and can be set in command line." + ::= { hwLiAgentObjects 4 } + + + hwLiAgentX3IpAddress OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The IP address of the X3 interface in LI agent.Just can be read by server + and can be set in command line." + ::= { hwLiAgentObjects 5 } + + + hwLiAgentX3Port OBJECT-TYPE + SYNTAX InetPortNumber + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Port of the X3 interface in LI agent.Just can be read by server + and can be set in command line." + ::= { hwLiAgentObjects 6 } + + + + hwLiGatewayGroup OBJECT IDENTIFIER ::= { hwLiMibObjects 3 } + + + + hwLiGatewayNewIndex OBJECT-TYPE + SYNTAX Integer32 (0 | 1..10) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object contains a value which may be used as an index + value for a new HwLiGatewayEntry. This is to reduce + the probability of errors during creation of new hwLiGatewayTable + entries.0 means no free resource." + ::= { hwLiGatewayGroup 1 } + + + hwLiGatewayTable OBJECT-TYPE + SYNTAX SEQUENCE OF HwLiGatewayEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table lists the LI Gateway Devices with which the + intercepting device communicates. + + This table is written by the LI Gateway Device, and is always + volatile. This is because intercepts may disappear during a + restart of the intercepting equipment. + + Entries are added to this table via hwLiGatewayStatus in + accordance with the RowStatus convention." + ::= { hwLiGatewayGroup 2 } + + + hwLiGatewayEntry OBJECT-TYPE + SYNTAX HwLiGatewayEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The entry describes a single session maintained with an + application on a LI Gateway Device." + INDEX { hwLiGatewayIndex } + ::= { hwLiGatewayTable 1 } + + + HwLiGatewayEntry ::= + SEQUENCE { + hwLiGatewayIndex + Integer32, + hwLiGatewayAddressType + InetAddressType, + hwLiGatewayX2Protocol + INTEGER, + hwLiGatewayX2Address + InetAddress, + hwLiGatewayX2Port + InetPortNumber, + hwLiGatewayX3Protocol + INTEGER, + hwLiGatewayX3Address + InetAddress, + hwLiGatewayX3Port + InetPortNumber, + hwLiGatewayX3HeartBeatTimer + Integer32, + hwLiGatewayX3NoResponseNum + Integer32, + hwLiGatewayX3OperateStatus + INTEGER, + hwLiGatewayX3Dscp + HWLiDscp, + hwLiGatewayRowStatus + RowStatus, + hwLiGatewayX3AddressType + InetAddressType, + hwLiGatewayX2AddressType + InetAddressType + } + + + hwLiGatewayIndex OBJECT-TYPE + SYNTAX Integer32 (1..10) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The index of the LIG itself." + ::= { hwLiGatewayEntry 1 } + + + hwLiGatewayAddressType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The type of address in LIG" + DEFVAL { ipv4 } + ::= { hwLiGatewayEntry 2 } + + + hwLiGatewayX2Protocol OBJECT-TYPE + SYNTAX INTEGER + { + udp(1), + tcp(2) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The protocol used in transferring intercepted data to the + Gateway Device. " + DEFVAL { tcp } + ::= { hwLiGatewayEntry 3 } + + + + hwLiGatewayX2Address OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The IP Address of the Gateway Device's network interface + to which to direct IRI." + ::= { hwLiGatewayEntry 4 } + + + + hwLiGatewayX2Port OBJECT-TYPE + SYNTAX InetPortNumber + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The port number on the Gateway Device's network interface + to which to direct IRI." + ::= { hwLiGatewayEntry 5 } + + + + hwLiGatewayX3Protocol OBJECT-TYPE + SYNTAX INTEGER + { + udp(1), + tcp(2) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The protocol used in transferring intercepted data to the + Gateway Device. " + DEFVAL { udp } + ::= { hwLiGatewayEntry 6 } + + + hwLiGatewayX3Address OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The IP Address of the Gateway Device's network interface + to which to direct CC." + ::= { hwLiGatewayEntry 7 } + + + + hwLiGatewayX3Port OBJECT-TYPE + SYNTAX InetPortNumber + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The port number on the Gateway Device's network interface + to which to direct intercepted traffic." + ::= { hwLiGatewayEntry 8 } + + + + hwLiGatewayX3HeartBeatTimer OBJECT-TYPE + SYNTAX Integer32 (0..255) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The timer for sending HeartBeat to LIG,In seconds" + DEFVAL { 5 } + ::= { hwLiGatewayEntry 9 } + + + + hwLiGatewayX3NoResponseNum OBJECT-TYPE + SYNTAX Integer32 (2..16) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The times of heartbeats that allowed to missed from LIG" + DEFVAL { 3 } + ::= { hwLiGatewayEntry 10 } + + + + hwLiGatewayX3OperateStatus OBJECT-TYPE + SYNTAX INTEGER + { + normal(1), + noHeartBeat(2), + linkdown(3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The operate status of X3 interface" + ::= { hwLiGatewayEntry 11 } + + + + hwLiGatewayX3Dscp OBJECT-TYPE + SYNTAX HWLiDscp + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The Differentiated Services Code Point the intercepting + device applies to the IP packets encapsulating the + intercepted traffic." + DEFVAL { 0 } + ::= { hwLiGatewayEntry 12 } + + + + hwLiGatewayRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The status of this conceptual row. This object is used to + manage creation, modification and deletion of rows in this + table. + " + ::= { hwLiGatewayEntry 14 } + + + hwLiGatewayX3AddressType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The type of address in LIG" + DEFVAL { ipv4 } + ::= { hwLiGatewayEntry 15 } + + + hwLiGatewayX2AddressType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The type of address in LIG" + DEFVAL { ipv4 } + ::= { hwLiGatewayEntry 16 } + + + + hwLiGatewayCapabilities OBJECT-TYPE + SYNTAX BITS + { + ipv4SrcInterface(0), + ipv6SrcInterface(1), + udp(2), + tcp(3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object displays the device capabilities with respect to + certain fields in Gateway Device table. This may be dependent + on hardware capabilities, software capabilities. + The following values may be supported: + ipv4SrcInterface: SNMP ifIndex Value may be used to select + the interface (denoted by + hwLiGatewaySrcInterface) on the + intercepting device from which to + transmit intercepted data to an IPv4 + address Gateway Device. + + + ipv6SrcInterface: SNMP ifIndex Value may be used to select + the interface (denoted by + hwLiGatewaySrcInterface) on the + intercepting device from which to + transmit intercepted data to an IPv6 + address Gateway Device. + + + udp: UDP may be used as transport protocol + (denoted by hwLiGatewayTransport) in + transferring intercepted data to the + Gateway Device. + + + tcp: TCP may be used as transport protocol + (denoted by hwLiGatewayTransport) in + transferring intercepted data to the + Gateway Device." + ::= { hwLiGatewayGroup 3 } + + + + hwLiStreamGroup OBJECT IDENTIFIER ::= { hwLiMibObjects 4 } + + + + hwLiStreamTable OBJECT-TYPE + SYNTAX SEQUENCE OF HwLiStreamEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The Intercept Stream Table lists the IPv4 and IPv6 streams + to be intercepted. The same data stream must be used by + one LIG. + + The first index indicates which LIG the + intercepted traffic will be diverted to. The second index + permits multiple classifiers to be used together, such as + having an IP address as source or destination." + ::= { hwLiStreamGroup 2 } + + + hwLiStreamEntry OBJECT-TYPE + SYNTAX HwLiStreamEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A stream entry indicates a single data stream to be + intercepted to a Mediation Device. Many selected data + streams may go to the same application interface, and many + application interfaces are supported." + INDEX { hwLiGatewayIndex, hwLiStreamIndex } + ::= { hwLiStreamTable 1 } + + + HwLiStreamEntry ::= + SEQUENCE { + hwLiStreamIndex + Integer32, + hwLiStreamLiId + Unsigned32, + hwLiStreamActivationType + INTEGER, + hwLiStreamSessionId + Integer32, + hwLiStreamTargetIdType + INTEGER, + hwLiStreamSrcMacAddress + MacAddress, + hwLiStreamDstMacAddress + MacAddress, + hwLiStreamSrcIpAddress + InetAddress, + hwLiStreamSrcIpLength + InetAddressPrefixLength, + hwLiStreamDstIpAddress + InetAddress, + hwLiStreamDstIpLength + InetAddressPrefixLength, + hwLiStreamProtocol + Integer32, + hwLiStreamSrcPort + InetPortNumber, + hwLiStreamDstPort + InetPortNumber, + hwLiStreamIfIndex + Integer32, + hwLiStreamUserName + OCTET STRING, + hwLiStreamRowStatus + RowStatus, + hwLiStreamSrcIpAddressType + InetAddressType, + hwLiStreamDstIpAddressType + InetAddressType, + hwLiStreamSrcVpnName + OCTET STRING, + hwLiStreamDstVpnName + OCTET STRING, + hwLiStreamL2tpIfIndex + Integer32, + hwLiStreamL2tpVlanId + Integer32, + hwLiStreamAcctSessionId + OCTET STRING + } + + + hwLiStreamIndex OBJECT-TYPE + SYNTAX Integer32 (1..8192) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The index of the stream itself." + ::= { hwLiStreamEntry 1 } + + + + hwLiStreamLiId OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The ID indicate a independency stream in a LIG ." + ::= { hwLiStreamEntry 2 } + + + + hwLiStreamActivationType OBJECT-TYPE + SYNTAX INTEGER + { + iri(1), + cc(2), + both(3) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Intercepted IRI or CC or BOTH." + DEFVAL { cc } + ::= { hwLiStreamEntry 3 } + + + + hwLiStreamSessionId OBJECT-TYPE + SYNTAX Integer32 (0..2147483647) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The index of the stream itself.0 means no session ID will be specified" + DEFVAL { 0 } + ::= { hwLiStreamEntry 4 } + + + + hwLiStreamTargetIdType OBJECT-TYPE + SYNTAX INTEGER + { + oneDirection(1), + biDirection(2) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Target ID type specifies the type of packets. + 1 means one direction traffic is intercept, + 2 means bidirectional traffic is intercept. + + for bidirectional interception, if the source IP or destination IP + in a packet is equal with the configured hwLiStreamSrcIpAddress£¬ + If other condition is satisfied then the packet is intercepted. + + for one-directional interception, if the sourceIP and DestinationIP + in a packet is equal with the configured hwLiStreamSrcIpAddress and + hwLiStreamDstIPAddress£¬If other condition is satisfied then the + packet is intercepted" + DEFVAL { biDirection } + ::= { hwLiStreamEntry 5 } + + + + hwLiStreamSrcMacAddress OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Source Mac address of the packets which will be intercepted.0000-0000-0000 means no MAC address will be specified" + ::= { hwLiStreamEntry 7 } + + + + hwLiStreamDstMacAddress OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Destination Mac address of the packets which will be intercepted." + ::= { hwLiStreamEntry 8 } + + + + hwLiStreamSrcIpAddress OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The Source Address used in packet selection. This address will + be of the type specified in hwLiStreamIpAddrType.0.0.0.0 means no IP address will be specified" + DEFVAL { '00000000'H } + ::= { hwLiStreamEntry 9 } + + + + hwLiStreamSrcIpLength OBJECT-TYPE + SYNTAX InetAddressPrefixLength + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The length of the Source Prefix. A value of 32 causes all + addresses to match. This prefix length will be consistent with + the type specified in hwLiStreamIpAddrType." + DEFVAL { 32 } + ::= { hwLiStreamEntry 10 } + + + + hwLiStreamDstIpAddress OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The Destination address or prefix used in packet selection. + This address will be of the type specified in + hwLiStreamIpAddrType.0.0.0.0 means no IP address will be specified" + DEFVAL { '00000000'H } + ::= { hwLiStreamEntry 11 } + + + hwLiStreamDstIpLength OBJECT-TYPE + SYNTAX InetAddressPrefixLength + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The length of the Destination Prefix. A value of 32 causes + all addresses to match. This prefix length will be consistent + with the type specified in hwLiStreamIpAddrType." + DEFVAL { 32 } + ::= { hwLiStreamEntry 12 } + + + + hwLiStreamProtocol OBJECT-TYPE + SYNTAX Integer32 (0..255) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Protocol type of the packets which will be intercepted.0 means no Protocol type will be specified" + DEFVAL { 0 } + ::= { hwLiStreamEntry 13 } + + + hwLiStreamSrcPort OBJECT-TYPE + SYNTAX InetPortNumber + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The fourth layer source port.0 means no Port will be specified" + DEFVAL { 0 } + ::= { hwLiStreamEntry 14 } + + + hwLiStreamDstPort OBJECT-TYPE + SYNTAX InetPortNumber + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The fourth layer Destination port.0 means no Port will be specified" + DEFVAL { 0 } + ::= { hwLiStreamEntry 15 } + + + + hwLiStreamIfIndex OBJECT-TYPE + SYNTAX Integer32 (0..2147483647) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The interface switch carrying the intercepted taffic.0 means no interface will be specified" + DEFVAL { 0 } + ::= { hwLiStreamEntry 16 } + + + + hwLiStreamUserName OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The username whose traffic will be intercepted.zero-length means no user will be specified" + ::= { hwLiStreamEntry 17 } + + + hwLiStreamRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The status of this conceptual row. This object is used to + manage creation, modification and deletion of rows in this + table." + ::= { hwLiStreamEntry 18 } + + + hwLiStreamSrcIpAddressType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The source IP address of the interception stream" + DEFVAL { ipv4 } + ::= { hwLiStreamEntry 19 } + + + hwLiStreamDstIpAddressType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The destination IP address of the interception stream" + DEFVAL { ipv4 } + ::= { hwLiStreamEntry 20 } + + + hwLiStreamSrcVpnName OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The source VPN instance name whose traffic will be intercepted.zero-length means no VPN will be specified" + ::= { hwLiStreamEntry 21 } + + + + hwLiStreamDstVpnName OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The destination VPN instance name whose traffic will be intercepted. zero-length means no VPN will be specified" + ::= { hwLiStreamEntry 22 } + + + hwLiStreamL2tpIfIndex OBJECT-TYPE + SYNTAX Integer32 (0..2147483647) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The L2TP ifindex of intercepting stream.0 means no l2tpIfindex will be specified" + DEFVAL { 0 } + ::= { hwLiStreamEntry 23 } + + hwLiStreamL2tpVlanId OBJECT-TYPE + SYNTAX Integer32 (0..2147483647) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The L2TP VLAN ID of intercepting stream.0 means no Vlan will be specified" + DEFVAL { 0 } + ::= { hwLiStreamEntry 24 } + + hwLiStreamAcctSessionId OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The accounting session ID of intercepting stream.zero-length means no accouting session ID will be specified" + ::= { hwLiStreamEntry 25 } + + hwLiMibConform OBJECT IDENTIFIER ::= { hwLiMib 3 } + + + + hwLiMibCompliances OBJECT IDENTIFIER ::= { hwLiMibConform 2 } + + + hwLiMibCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "Description." + MODULE -- this module + MANDATORY-GROUPS { hwLiGatewayComplianceGroup, hwLiStreamComplianceGroup, hwLiNotificationGroup, hwLiGatewayCpbComplianceGroup } + ::= { hwLiMibCompliances 1 } + + + + hwLiMibGroups OBJECT IDENTIFIER ::= { hwLiMibConform 3 } + + + + hwLiAgentComplianceGroup OBJECT-GROUP + OBJECTS { hwLiAgentTime, hwLiAgentEnable, hwLiAgentX2IpAddress, hwLiAgentX2Port, hwLiAgentX3IpAddress, + hwLiAgentX3Port } + STATUS current + DESCRIPTION + "Description." + ::= { hwLiMibGroups 1 } + + + + hwLiGatewayComplianceGroup OBJECT-GROUP + OBJECTS { hwLiGatewayNewIndex, hwLiGatewayAddressType, hwLiGatewayX2Protocol, hwLiGatewayX2Address, hwLiGatewayX2Port, + hwLiGatewayX3Protocol, hwLiGatewayX3Address, hwLiGatewayX3Port, hwLiGatewayX3HeartBeatTimer, hwLiGatewayX3NoResponseNum, + hwLiGatewayX3OperateStatus, hwLiGatewayX3Dscp, hwLiGatewayRowStatus,hwLiGatewayX3AddressType,hwLiGatewayX2AddressType } + STATUS current + DESCRIPTION + "Description." + ::= { hwLiMibGroups 2 } + + + + hwLiStreamComplianceGroup OBJECT-GROUP + OBJECTS { hwLiStreamLiId, hwLiStreamActivationType, hwLiStreamSessionId, hwLiStreamTargetIdType, + hwLiStreamProtocol, hwLiStreamSrcPort,hwLiStreamDstPort,hwLiStreamSrcMacAddress, hwLiStreamDstMacAddress, hwLiStreamSrcIpAddress, hwLiStreamSrcIpLength, + hwLiStreamDstIpAddress, hwLiStreamDstIpLength, hwLiStreamIfIndex, hwLiStreamUserName, hwLiStreamRowStatus, + hwLiStreamSrcIpAddressType,hwLiStreamDstIpAddressType,hwLiStreamSrcVpnName,hwLiStreamDstVpnName, + hwLiStreamL2tpIfIndex,hwLiStreamL2tpVlanId,hwLiStreamAcctSessionId } + STATUS current + DESCRIPTION + "Description." + ::= { hwLiMibGroups 3 } + + + + hwLiNotificationGroup NOTIFICATION-GROUP + NOTIFICATIONS { hwLiMibActive, hwLiX3HeartBeatAlarm, hwLiX3HeartBeatRecover} + STATUS current + DESCRIPTION + "Description." + ::= { hwLiMibGroups 4 } + + + + hwLiGatewayCpbComplianceGroup OBJECT-GROUP + OBJECTS { hwLiGatewayCapabilities } + STATUS current + DESCRIPTION + "Description." + ::= { hwLiMibGroups 5 } + + + + END + + + -- cgit v1.2.3