From 98a672123c7872f6b9b75a9a2b6bb3aea504de6a Mon Sep 17 00:00:00 2001 From: David Leutgeb Date: Tue, 5 Dec 2023 12:25:34 +0100 Subject: Initial commit --- MIBS/hp/CPQPOWER-MIB | 8329 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 8329 insertions(+) create mode 100644 MIBS/hp/CPQPOWER-MIB (limited to 'MIBS/hp/CPQPOWER-MIB') diff --git a/MIBS/hp/CPQPOWER-MIB b/MIBS/hp/CPQPOWER-MIB new file mode 100644 index 0000000..ecec8fb --- /dev/null +++ b/MIBS/hp/CPQPOWER-MIB @@ -0,0 +1,8329 @@ +-- **************************************************************************** +-- :CPQ,DEV: +-- +-- * POWER DEVICE SNMP MANAGEMENT CARD MIB DEFINITIONS +-- +-- * $Date: 2019/09/16 10:00:00 $ +-- * $Revision: 1.84 $ +-- Revised by Shreekanth Gonibasappa +-- Hewlett-Packard Company +-- Confidential - Need To Know +-- :CPQ,ENDDEV: +-- **************************************************************************** +-- +-- Power Device SNMP Management Card +-- Management Information Base for SNMP Network Management +-- +-- +-- Copyright 2001, 2016 Hewlett-Packard Enterprise Development Company, L.P. +-- +-- Hewlett-Packard Enterprise Company shall not be liable for technical or +-- editorial errors or omissions contained herein. The information in +-- this document is provided "as is" without warranty of any kind and +-- is subject to change without notice. The warranties for HP products +-- are set forth in the express limited warranty statements +-- accompanying such products. Nothing herein should be construed as +-- constituting an additional warranty. +-- +-- Confidential computer software. Valid license from HPE required for +-- possession, use or copying. Consistent with FAR 12.211 and 12.212, +-- Commercial Computer Software, Computer Software Documentation, and +-- Technical Data for Commercial Items are licensed to the U.S. +-- Government under vendor's standard commercial license. +-- +-- Refer to the READMIB.RDM file for more information about the +-- organization of the information in the Compaq Enterprise. +-- +-- The Compaq Enterprise number is 232. +-- The ASN.1 prefix to, and including the Compaq Enterprise is: +-- 1.3.6.1.4.1.232 +-- +-- MIB Version 1.84 +-- +-- +-- ********************************************************************* +-- :CPQ,DEV: +-- Release History +-- Date: October 25, 2005 (version 1.0) - Phi Nguyen +-- Date: December 05, 2005 (version 1.2) - Phi Nguyen +-- Date: Jan 17, 2008 (version 1.31) Add PDR - Brian Vo +-- Date: Feb 25, 2008 (version 1.40) Add Type 19 and trigger TestTrap - Brian Vo +-- Date: May 20, 2009 (version 1.61) Add new Modular PDU - Brian Vo +-- Date: Nov 19, 2009 (version 1.62) Add Input Rating, Redundant Status -Brian Vo +-- Date: Jan 05, 2011 (version 1.64) Add OIDs to support mPDU Rack information -Brian Vo +-- Date: Mar 04, 2011 (v1.66) Modify description for OIDs support HPSIM - Brian Vo +-- Date: Oct 27, 2011 (v1.66) Add #Summary and #Arguments to the Trap-Type - Brian Vo +-- Date: Dec 13, 2011 (v1.66) Add mpduRegionalNominalVotage, mpduDeviceDetectionThreshold - Brian Vo +-- Date: Dec 13, 2011 (v1.66) Add PDU inputCurrent and breakerCurrent with 2 decimal points - Brian Vo +-- Date: Feb 17, 2012 (v1.66) Add Offline UPS - Brian Vo +-- Date: Mar 16, 2012 (v1.66) Rename to oupsRackID and oupsRackProductDescription - Brian Vo +-- Date: Mar 26, 2012 (v1.66) Change Input and Output PowerFactor not per phase - Brian Vo +-- Date: Apr 04, 2012 (v1.66) Add MEPO and InputWithGenerator - Brian Vo +-- Date: Sep 13, 2012 (v1.68) Add power metering in WH for mPDU - Brian Vo +-- Date: Oct 08, 2012 (v1.70) Revise the oups (DirectFlow UPS) section - Brian Vo +-- Date: Nov 13, 2012 (v1.72) add oupsOutputLoadPerPhase, change data type for load level - Brian Vo +-- Date: Jan 08, 2013 (v1.72) Remove MEPO and add oupsTestTrap - Brian Vo +-- Date: Mar 14, 2013 (v1.74) Add PDU2 - Brian Vo +-- Date: Apr 15, 2013 (v1.74) Modify pdu2InputPhaseCurrentMeasType and pdu2InputPowerWattHourTimer - Brian Vo +-- Date: Jun 05, 2013 (v1.76) Remove oupsBatCurrent. revise oupsGeneratorDetection - Brian Vo +-- Date: Jun 10, 2013 (v1.76) Change to enumerated value from bad (-1) to bad (3) for monitored PDU - Brian Vo +-- Date: Mar 16, 2014 (v1.78) Add pdu2Outlet section for Managed PDU -BVo +-- Date: Apr 07, 2014 (v1.78) Revise to outletcount, outlettype. Remove outletvoltage. Add groupBreakerStatus -BVo +-- Date: Apr 22, 2014 (v1.78) Add pdu2OutletControlSwitchable, make consistent description of Watt-hour data -BVo +-- Date: Oct 01, 2014 (v1.80) Add pdu2OutletControlShutoffDelay -BVo +-- Date: May 31, 2016 (v1.82) Add support for new high voltage PDU (hpdu) -BVo +-- Date: Jan 12, 2017 (v1.82) Add support for PDU3 monitored and managed PDU line -BVo +-- Date: Sep 16, 2019 (v1.84) Add changes for the Dragon PDU based on Holder -Shreekanth Gonibasappa +-- +-- :CPQ,ENDDEV: +-- ********************************************************************* +-- +-- VARIABLES REQUIRED FOR HP MANAGEMENT +-- =================================================================================== +-- +-- =================================================================================== +-- sysDescr (1.3.6.1.2.1.1.1) which is defined in RFC1213.MIB. +-- sysObjectID (1.3.6.1.2.1.1.2) which is defined in RFC1213.MIB. +-- sysContact (1.3.6.1.2.1.1.4) which is defined in RFC1213.MIB. +-- sysName (1.3.6.1.2.1.1.5) is which is defined in RFC1213.MIB. +-- sysLocation (1.3.6.1.2.1.1.6) which is defined in RFC1213.MIB. +-- +-- sysDescr OBJECT-TYPE +-- SYNTAX DisplayString (SIZE (0..255)) +-- ACCESS read-only +-- STATUS mandatory +-- DESCRIPTION +-- "A textual description of the entity. This value +-- should include the full name, hardware version and +-- firmware version of management module's. +-- It is mandatory that this only contain +-- printable ASCII characters." +-- ::= { system 1 } +-- +-- sysObjectID OBJECT-TYPE +-- SYNTAX DisplayString (SIZE (0..255)) +-- ACCESS read-write +-- STATUS mandatory +-- DESCRIPTION +-- "Return the OID of the management module +-- for this UPS or PDU defined in the CPQPOWER.MIB +-- i.e. .1.3.6.1.4.1.232.165.3 is for UPS OIDs." +-- ::= { system 2 } +-- +-- sysContact OBJECT-TYPE +-- SYNTAX DisplayString (SIZE (0..255)) +-- ACCESS read-write +-- STATUS mandatory +-- DESCRIPTION +-- "The textual identification of the contact person +-- for this managed node, together with information +-- on how to contact this person." +-- ::= { system 4 } +-- +-- sysName OBJECT-TYPE +-- SYNTAX DisplayString (SIZE (0..255)) +-- ACCESS read-write +-- STATUS mandatory +-- DESCRIPTION +-- "An administratively-assigned name for this +-- managed node. By convention, this is the node's +-- fully-qualified domain name." +-- ::= { system 5 } +-- +-- sysLocation OBJECT-TYPE +-- SYNTAX DisplayString (SIZE (0..255)) +-- ACCESS read-write +-- STATUS mandatory +-- DESCRIPTION +-- "The physical location of this node (e.g., +-- `telephone closet, 3rd floor')." +-- ::= { system 6 } +-- +-- ==================================================================================== +-- +-- ==================================================================================== +-- cpqSiSysSerialNum (1.3.6.1.4.1.232.2.2.2.1) which is defined in CPQSINFO.MIB. +-- This is the PDU/UPS serial number (listed but not implemented in SNMP Agent) +-- +-- +-- cpqSiSysSerialNum OBJECT-TYPE +-- SYNTAX DisplayString (SIZE (0..255)) +-- ACCESS read-only +-- STATUS mandatory +-- DESCRIPTION +-- "The serial number of the PDU or UPS. +-- The string will be empty if the system does not report the +-- serial number." +-- ::= { cpqSiAsset 1 } +-- =================================================================================== +-- +-- =================================================================================== +-- cpqSiProductName (1.3.6.1.4.1.232.2.2.4.2) which is defined in CPQSINFO.MIB. +-- This is the PDU/UPS management module product model name (listed but not implemented in SNMP Agent) +-- +-- +-- cpqSiProductName OBJECT-TYPE +-- SYNTAX DisplayString (SIZE (0..255)) +-- ACCESS read-only +-- STATUS mandatory +-- DESCRIPTION +-- "This device product name i.e. HP UPS Management Module" +-- ::= { cpqSiSystemBoard 2 } +-- ==================================================================================== +-- +-- ==================================================================================== +-- cpqHoGUID (1.3.6.1.4.1.232.11.2.10.3) which is defined in CPQHOST.MIB +-- This field needs to be filled with the unique ID +-- P/N of PDU/UPS management module (16 bytes) +-- +-- cpqHoGUID OBJECT-TYPE +-- SYNTAX OCTET STRING (SIZE (16)) +-- ACCESS read-write +-- STATUS mandatory +-- DESCRIPTION +-- "The globally unique identifier of this device. UUID or P/N + SN of HP Management Module." +-- ::= { cpqHoSystemStatus 3 } +-- ==================================================================================== +-- +-- ==================================================================================== +-- cpqHoMibStatusArray (1.3.6.1.4.1.232.11.2.10.1) which is defined in CPQHOST.MIB +-- Pretty complicated to decipher if you do not have the guide. We only use the first +-- 4 octets. +-- +-- Octet 0 = 00000001 (always) +-- Octet 1 = 00000000 through 00000100 depending on Device H/W Condition below (0000,0001, 0010, 0011, 0100) +-- Octet 2 = 00000001 (always) +-- Octet 3 = 00010000 (always decimal 16 see table below) +-- +-- For example: With a UPS device with OK status, the values of the 4 octets would be: +-- +-- Octet 0 = 0x01 (fixed) +-- Octet 1 = 0x02 (OK overall status) +-- Octet 2 = 0x01 (fixed) +-- Octet 3 = 0x10 (Device type = 16 for UPS) +-- +-- cpqHoMibStatusArray OBJECT-TYPE +-- SYNTAX OCTET STRING (SIZE (4..256)) +-- ACCESS read-only +-- STATUS mandatory +-- DESCRIPTION +-- "The MIB Status Array is an array of MIB status structures. Each +-- structure is made up of 4 octets. +-- +-- Array element 0 is the status for all MIBs in the Compaq +-- Enterprise. +-- +-- Device H/W Condition based on alarm (Octet 1) +-- 0 - Not available (e.g. Loss/lack of communication between card and device UPS/PDU) +-- 1 - Other (unknown status) +-- 2 - OK (device normal operation) +-- 3 - Degraded (warning alarm) +-- 4 - Failed (critical alarm) +-- +-- Detailed Type (octet 3) +-- Bits 0-7 Detailed Type, only used if bit 0 in octect 2 is 1. +-- +-- Type Values for Bits 0-4 (maps to CIM7 types) +-- Unknown = 0 +-- Server = 1 (yes a duplicate of the server flag) +-- Desktop = 2 +-- Workstation = 3 +-- Portable = 4 +-- Router = 5 +-- Cluster = 6 +-- Printer = 7 +-- Switch = 8 (network switch) +-- Repeater = 9 +-- Remote Access Device = 10 +-- Other = 11 +-- Management Processor = 12 (rib, RILOE, iLo) +-- Rack = 13 +-- Enclosure = 14 +-- KVM Switch = 15 (IP enabled keyboard video mouse switch). +-- UPS = 16 +-- Power Distribution Unit = 17 (PDU) +-- Environmental Monitor = 18 (eg CMC) +-- Power Distribution Rack = 19 (PDR)" +-- ::= { cpqHoSystemStatus 1 } +-- ==================================================================================== +-- All Traps, Objects of CPQPOWER.MIB start with .1.3.6.1.4.1.232.165 + +CPQPOWER-MIB DEFINITIONS ::= BEGIN + +IMPORTS + compaq FROM CPQHOST-MIB +-- enterprises FROM RFC1155-SMI +-- IpAddress FROM RFC1155-SMI + +-- Counter, enterprises FROM RFC1155-SMI + +-- TimeTicks FROM RFC1155-SMI +-- Gauge FROM RFC1155-SMI + Counter FROM RFC1155-SMI + DisplayString FROM RFC1213-MIB + ifIndex FROM RFC1213-MIB + ifDescr FROM RFC1213-MIB + sysName FROM RFC1213-MIB + sysDescr FROM RFC1213-MIB + sysContact FROM RFC1213-MIB + sysLocation FROM RFC1213-MIB + OBJECT-TYPE FROM RFC-1212 + TRAP-TYPE FROM RFC-1215; + +-- Identifiers from CPQSINFO.MIB (no longer used by HP SIM) +-- cpqSystemInfo OBJECT IDENTIFIER ::= {compaq 2} +-- cpqSiComponent OBJECT IDENTIFIER ::= {cpqSystemInfo 2} +-- cpqSiSystemBoard OBJECT IDENTIFIER ::= {cpqSiComponent 4} + +-- Identifiers from CPQHOST.MIB (include when compiling) +-- cpqHostOs OBJECT IDENTIFIER ::= {compaq 11} +-- cpqHoComponent OBJECT IDENTIFIER ::= {cpqHostOs 2} +-- cpqHoSystemStatus OBJECT IDENTIFIER ::= {cpqHoComponent 10} + +-- compaq OBJECT IDENTIFIER ::= { enterprises 232 } +cpqPower OBJECT IDENTIFIER ::= {compaq 165} + +-- +-- Power device object identifiers +-- +powerDevice OBJECT IDENTIFIER ::= {cpqPower 1} + +trapInfo OBJECT IDENTIFIER ::= {powerDevice 1} +managementModuleIdent OBJECT IDENTIFIER ::= {powerDevice 2} + +-- +-- basic PDU object identifiers +-- +pdu OBJECT IDENTIFIER ::= {cpqPower 2} + +pduIdent OBJECT IDENTIFIER ::= { pdu 1 } +pduInput OBJECT IDENTIFIER ::= { pdu 2 } +pduOutput OBJECT IDENTIFIER ::= { pdu 3 } + +-- +-- UPS object identifiers +-- +ups OBJECT IDENTIFIER ::= {cpqPower 3} + +upsIdent OBJECT IDENTIFIER ::= { ups 1 } +upsBattery OBJECT IDENTIFIER ::= { ups 2 } +upsInput OBJECT IDENTIFIER ::= { ups 3 } +upsOutput OBJECT IDENTIFIER ::= { ups 4 } +upsBypass OBJECT IDENTIFIER ::= { ups 5 } +upsEnvironment OBJECT IDENTIFIER ::= { ups 6 } +upsTest OBJECT IDENTIFIER ::= { ups 7 } +upsControl OBJECT IDENTIFIER ::= { ups 8 } +upsConfig OBJECT IDENTIFIER ::= { ups 9 } +upsRecep OBJECT IDENTIFIER ::= { ups 10 } +upsTopology OBJECT IDENTIFIER ::= { ups 11 } + +-- +-- PDR object identifiers +-- +pdr OBJECT IDENTIFIER ::= {cpqPower 4} + +pdrIdent OBJECT IDENTIFIER ::= { pdr 1 } +pdrPanel OBJECT IDENTIFIER ::= { pdr 2 } +pdrBreaker OBJECT IDENTIFIER ::= { pdr 3 } + +-- +-- MPDU object identifiers +-- +mpdu OBJECT IDENTIFIER ::= {cpqPower 5} + +mpduIdent OBJECT IDENTIFIER ::= { mpdu 1 } +mpduOutput OBJECT IDENTIFIER ::= { mpdu 2 } +mpduDeviceIdent OBJECT IDENTIFIER ::= { mpdu 3 } +mpduSmExtBarOutlet OBJECT IDENTIFIER ::= { mpdu 4 } + +-- +-- oups (offline UPS) object identifiers +-- +oups OBJECT IDENTIFIER ::= {cpqPower 6} + +oupsIdent OBJECT IDENTIFIER ::= { oups 1 } +oupsBattery OBJECT IDENTIFIER ::= { oups 2 } +oupsInput OBJECT IDENTIFIER ::= { oups 3 } +oupsOutput OBJECT IDENTIFIER ::= { oups 4 } +oupsMonitor OBJECT IDENTIFIER ::= { oups 5 } +oupsRackDiscovery OBJECT IDENTIFIER ::= { oups 6 } + +-- +-- PDU Monitored Managed PDU object identifiers +-- +pdu2 OBJECT IDENTIFIER ::= {cpqPower 7} + +pdu2Ident OBJECT IDENTIFIER ::= { pdu2 1 } +pdu2Input OBJECT IDENTIFIER ::= { pdu2 2 } +pdu2Group OBJECT IDENTIFIER ::= { pdu2 3 } +pdu2Environment OBJECT IDENTIFIER ::= { pdu2 4 } +pdu2Outlet OBJECT IDENTIFIER ::= { pdu2 5 } + + + +-- +-- HPDU High Voltage PDU object identifiers +-- +hpdu OBJECT IDENTIFIER ::= {cpqPower 9} + +hpduIdent OBJECT IDENTIFIER ::= { hpdu 1 } +hpduInput OBJECT IDENTIFIER ::= { hpdu 2 } +hpduOutlet OBJECT IDENTIFIER ::= { hpdu 3 } + + +-- +-- PDU3 Monitored Managed PDU object identifiers +-- +pdu3 OBJECT IDENTIFIER ::= {cpqPower 11} + +pdu3Ident OBJECT IDENTIFIER ::= { pdu3 1 } +pdu3Input OBJECT IDENTIFIER ::= { pdu3 2 } +pdu3Group OBJECT IDENTIFIER ::= { pdu3 3 } +pdu3Environment OBJECT IDENTIFIER ::= { pdu3 4 } +pdu3Outlet OBJECT IDENTIFIER ::= { pdu3 5 } + + + +-- ==================================================================================== +-- +-- powerDevice OBJECT IDENTIFIER ::= {cpqPower 1} +-- trapInfo OBJECT IDENTIFIER ::= {powerDevice 1} +-- trap information group +-- OID= .1.3.6.1.4.1.232.165.1.1 + +trapCode OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A number identifying the event for the trap that was sent. + Mapped unique trap code per unique event to be used by ISEE's + decoder ring." + ::= { trapInfo 1 } + +trapDescription OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A string identifying the event for that last trap that was sent." + ::= { trapInfo 2 } + +trapDeviceMgmtUrl OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A string contains the URL for the management software." + ::= { trapInfo 3 } + +trapDeviceDetails OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A string details information about the UPS such as SN (serial number), + PN (part number), and MN (Model Name)." + ::= { trapInfo 4 } + +trapDeviceName OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A string contains the name of the HP Management Module." + ::= { trapInfo 5 } + + + +-- ==================================================================================== +-- HP UPS Management Module +-- ==================================================================================== +-- +-- powerDevice OBJECT IDENTIFIER ::= {cpqPower 1} +-- managementModuleIdent OBJECT IDENTIFIER ::= {powerDevice 2} +-- Management module identification group +-- OID= .1.3.6.1.4.1.232.165.1.2 + +deviceManufacturer OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The device's manufacturer." + ::= { managementModuleIdent 1 } + +deviceModel OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The device's model." + ::= { managementModuleIdent 2 } + +deviceFirmwareVersion OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The device's firmware version(s)." + ::= { managementModuleIdent 3 } + +deviceHardwareVersion OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The device's hardware version." + ::= { managementModuleIdent 4 } + +deviceIdentName OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-write + STATUS mandatory + DESCRIPTION + "A string identifying the device. it came from sysName entered by user" + ::= { managementModuleIdent 5 } + +devicePartNumber OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The device's part number." + ::= { managementModuleIdent 6 } + +deviceSerialNumber OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The device's serial number." + ::= { managementModuleIdent 7 } + +deviceMACAddress OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The device's MAC address." + ::= { managementModuleIdent 8 } + + +-- ==================================================================================== +-- PDU +-- ==================================================================================== +-- +-- pdu OBJECT IDENTIFIER ::= {cpqPower 2} +-- pduIdent OBJECT IDENTIFIER ::= { pdu 1 } +-- PDU identification group +-- OID= .1.3.6.1.4.1.232.165.2.1 + +numOfPdu OBJECT-TYPE + SYNTAX INTEGER (0..63) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of PDUs." + ::= { pduIdent 1 } + +pduIdentTable OBJECT-TYPE + SYNTAX SEQUENCE OF PduIdentEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION "The Aggregate Object with number of entries equal to + NumOfPdu and including the PduIdent group." + ::= { pduIdent 2 } + +pduIdentEntry OBJECT-TYPE + SYNTAX PduIdentEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION "The ident table entry containing the name, + model, manufacturer, firmware version, part number, etc." + INDEX { pduIdentIndex } + ::= { pduIdentTable 1 } + +PduIdentEntry ::= SEQUENCE { + pduIdentIndex INTEGER, + pduName DisplayString, + pduModel DisplayString, + pduManufacturer DisplayString, + pduFirmwareVersion DisplayString, + pduPartNumber DisplayString, + pduSerialNumber DisplayString, + pduStatus INTEGER, + pduControllable INTEGER + } + +pduIdentIndex OBJECT-TYPE + SYNTAX INTEGER (0..100) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Index for the PduIdentEntry table." + ::= { pduIdentEntry 1 } + +pduName OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..63)) + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The string identify the device." + ::= { pduIdentEntry 2 } + +pduModel OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..63)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The Device Model." + ::= { pduIdentEntry 3 } + +pduManufacturer OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..63)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The Device Manufacturer Name (e.g. Hewlett-Packard)." + ::= { pduIdentEntry 4 } + +pduFirmwareVersion OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..63)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The firmware revision level of the device." + ::= { pduIdentEntry 5 } + +pduPartNumber OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..63)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The device part number." + ::= { pduIdentEntry 6 } + +pduSerialNumber OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..63)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The device serial number." + ::= { pduIdentEntry 7 } + +pduStatus OBJECT-TYPE + SYNTAX INTEGER + { + other(1), -- default + ok(2), + degraded(3), + failed(4) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The overall status of the device. A value of OK(2) indicates the device is operating normally. + A value of degraded(3) indicates the device is operating with warning indicators. A value of + failed(4) indicates the device is operating with critical indicators." + ::= { pduIdentEntry 8 } + +pduControllable OBJECT-TYPE + SYNTAX INTEGER + { + yes(1), + no(2) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "This object indicates whether or not the device is controllable." + ::= { pduIdentEntry 9 } + +-- ==================================================================================== +-- +-- pdu OBJECT IDENTIFIER ::= {cpqPower 2} +-- pduInput OBJECT IDENTIFIER ::= { pdu 2 } +-- PDU input group +-- OID= .1.3.6.1.4.1.232.165.2.2 + +pduInputTable OBJECT-TYPE + SYNTAX SEQUENCE OF PduInputEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "The Aggregate Object with number of entries equal to + NumOfPdu and including the PduInput group." + ::= {pduInput 1} + +pduInputEntry OBJECT-TYPE + SYNTAX PduInputEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "The input table entry containing the voltage and + current for the PDU" + INDEX { pduInputIndex } + ::= { pduInputTable 1 } + +PduInputEntry ::= SEQUENCE { + pduInputIndex INTEGER, + inputVoltage INTEGER, + inputCurrent INTEGER + } + +pduInputIndex OBJECT-TYPE + SYNTAX INTEGER (0..100) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Index for the PduInputEntry table." + ::= { pduInputEntry 1} + +inputVoltage OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) -- UNITS RMS Volts + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The measured input voltage from the PDU meters in volts." + ::= {pduInputEntry 2} + +inputCurrent OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) -- UNITS RMS 0.01 Amp + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The measured input current from the PDU meters in hundredths of Amp." + ::= {pduInputEntry 3} + +-- ==================================================================================== +-- +-- pdu OBJECT IDENTIFIER ::= {cpqPower 2} +-- pduOutput OBJECT IDENTIFIER ::= { pdu 3 } +-- PDU Output group +-- OID= .1.3.6.1.4.1.232.165.2.3 + +pduOutputTable OBJECT-TYPE + SYNTAX SEQUENCE OF PduOutputEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION "The Aggregate Object with number of entries equal to + NumOfPdu and including the PduInput group." + ::= {pduOutput 1} + +pduOutputEntry OBJECT-TYPE + SYNTAX PduOutputEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "The input table entry containing the name, + heat load, current load, power load, firmware, etc." + INDEX { pduOutputIndex } + ::= { pduOutputTable 1 } + +PduOutputEntry ::= SEQUENCE { + pduOutputIndex INTEGER, + pduOutputLoad INTEGER, + pduOutputHeat INTEGER, + pduOutputPower INTEGER, + pduOutputNumBreakers INTEGER + } + +pduOutputIndex OBJECT-TYPE + SYNTAX INTEGER (0..100) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Index for the PduOutputEntry table." + ::= { pduOutputEntry 1} + +pduOutputLoad OBJECT-TYPE + SYNTAX INTEGER (0..200) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The device output load in percent of rated capacity. A value of -1 will be + returned if the heat load is unable to be measured." + ::= { pduOutputEntry 2 } + +pduOutputHeat OBJECT-TYPE + SYNTAX INTEGER -- Units BTU + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total heat load measured on the PDU in BTUs. A value of -1 will be + returned if the heat load is unable to be measured." + ::= { pduOutputEntry 3 } + +pduOutputPower OBJECT-TYPE + SYNTAX INTEGER -- Units Watts + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total power load measured on the PDU in watts. A value of -1 will be + returned if the power load is unable to be measured." + ::= { pduOutputEntry 4 } + +pduOutputNumBreakers OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of breakers for the device. This variable indicates the number + of rows in the breakers table." + ::= { pduOutputEntry 5 } + +pduOutputBreakerTable OBJECT-TYPE + SYNTAX SEQUENCE OF PduOutputBreakerEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "List of breaker table entries. The number of entries is given by pduOutputNumBreakers ." + ::= { pduOutput 2 } + +pduOutputBreakerEntry OBJECT-TYPE + SYNTAX PduOutputBreakerEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "An entry containing information applicable to an breaker." + INDEX { pduOutputIndex, breakerIndex } + ::= { pduOutputBreakerTable 1 } + +PduOutputBreakerEntry ::= + SEQUENCE + { + breakerIndex INTEGER, + breakerVoltage INTEGER, + breakerCurrent INTEGER, + breakerPercentLoad INTEGER, + breakerStatus INTEGER + } + +breakerIndex OBJECT-TYPE + SYNTAX INTEGER (0..100) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The breaker identifier." + ::= { pduOutputBreakerEntry 1 } + +breakerVoltage OBJECT-TYPE + SYNTAX INTEGER -- UNITS Volts + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The breaker voltage in volts." + ::= { pduOutputBreakerEntry 2 } + +breakerCurrent OBJECT-TYPE + SYNTAX INTEGER -- UNITS 0.01 Amps + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The breaker current draw in hundredths of Amp." + ::= { pduOutputBreakerEntry 3 } + +breakerPercentLoad OBJECT-TYPE + SYNTAX INTEGER -- UNITS Percent + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The breaker load in percent." + ::= { pduOutputBreakerEntry 4 } + +breakerStatus OBJECT-TYPE + SYNTAX INTEGER + { + normal(1), + overloadWarning(2), + overloadCritical(3), + voltageRangeWarning(4), + voltageRangeCritical(5) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "This object indicates the status of the breaker. A value of normal(1) + indicates the breaker is operating normally. A value of overloadWarning(2) + indicates the breaker has an overload warning. A value of overloadCritical(3) + indicates the breaker is overloaded. A value of voltageRangeWarning(4) + indicates the breaker voltage is out of tolerance by 10-20%. A value of + voltageRangeCritical(5) indicates the breaker voltage is out of tolerance + by more than 20%. Note: Overload status has priority over voltage tolerance + status." + ::= { pduOutputBreakerEntry 5 } + + +-- ==================================================================================== +-- UPS +-- ==================================================================================== +-- +-- ups OBJECT IDENTIFIER ::= {cpqPower 3} +-- upsIdent OBJECT IDENTIFIER ::= { ups 1 } +-- UPS Identification group +-- OID= .1.3.6.1.4.1.232.165.3.1 + +upsIdentManufacturer OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..31)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The UPS Manufacturer Name (e.g. Hewlett-Packard)." + ::= { upsIdent 1 } + +upsIdentModel OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..63)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The UPS Model;Part number;Serial number (e.g. HP R5500 XR;204451-B21;B00123456W)." + ::= { upsIdent 2 } + +upsIdentSoftwareVersions OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..63)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The firmware revision level(s) of the UPS microcontroller(s)." + ::= { upsIdent 3 } + +upsIdentOemCode OBJECT-TYPE + SYNTAX INTEGER (0..255) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A binary code indicating vendor. This should be a ?0x0c? for HP" + ::= { upsIdent 4 } + +-- ==================================================================================== +-- +-- ups OBJECT IDENTIFIER ::= {cpqPower 3} +-- upsBattery OBJECT IDENTIFIER ::= { ups 2 } +-- UPS Battery group +-- OID= .1.3.6.1.4.1.232.165.3.2 + +upsBatTimeRemaining OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) -- UNITS seconds + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Battery run time in seconds before UPS turns off due + to low battery." + ::= { upsBattery 1 } + +upsBatVoltage OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) -- UNITS Volts DC + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Battery voltage as reported by the UPS meters." + ::= { upsBattery 2 } + +upsBatCurrent OBJECT-TYPE + SYNTAX INTEGER (-2147483648..2147483647) -- UNITS Amp DC + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Battery Current as reported by the UPS metering. + Current is positive when discharging, negative + when recharging the battery." + ::= { upsBattery 3 } + +upsBatCapacity OBJECT-TYPE + SYNTAX INTEGER (0..100) -- UNITS percent + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Battery percent charge." + ::= { upsBattery 4 } + +upsBatteryAbmStatus OBJECT-TYPE + SYNTAX INTEGER { + batteryCharging(1), + batteryDischarging(2), + batteryFloating(3), + batteryResting(4), + unknown(5) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Gives the status of the Advanced Battery Management; + batteryFloating(3) status means that the charger is temporarily + charging the battery to its float voltage; batteryResting(4) is the + state when the battery is fully charged and none of the other actions + (charging/discharging/floating) is being done." + ::= { upsBattery 5 } + +-- ==================================================================================== +-- +-- ups OBJECT IDENTIFIER ::= {cpqPower 3} +-- upsInput OBJECT IDENTIFIER ::= { ups 3 } +-- UPS Input group +-- OID= .1.3.6.1.4.1.232.165.3.3 + +upsInputFrequency OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) -- UNITS 0.1 Hertz + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The utility line frequency in tenths of Hz." + ::= { upsInput 1 } + +upsInputLineBads OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of times the Input was out of tolerance + in voltage or frequency." + ::= { upsInput 2 } + +upsInputNumPhases OBJECT-TYPE + SYNTAX INTEGER (0..6) + ACCESS read-only + STATUS mandatory + ::= { upsInput 3 } + +upsInputTable OBJECT-TYPE + SYNTAX SEQUENCE OF UpsInputEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION "The Aggregate Object with number of entries equal to + NumPhases and including the UpsInput group." + ::= { upsInput 4 } + +upsInputEntry OBJECT-TYPE + SYNTAX UpsInputEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION "The input table entry containing the current, voltage, etc." + INDEX { upsInputPhase } + ::= { upsInputTable 1 } + +UpsInputEntry ::= SEQUENCE { + upsInputPhase INTEGER, + upsInputVoltage INTEGER, + upsInputCurrent INTEGER, + upsInputWatts INTEGER + } + +upsInputPhase OBJECT-TYPE + SYNTAX INTEGER (0..6) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of the phase. Serves as index for input table." + ::= { upsInputEntry 1 } + +upsInputVoltage OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) -- UNITS RMS Volts + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The measured input voltage from the UPS meters in volts." + ::= { upsInputEntry 2 } + +upsInputCurrent OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) -- UNITS RMS Amp + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The measured input current from the UPS meters in amps." + ::= { upsInputEntry 3 } + +upsInputWatts OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) -- UNITS Watts + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The measured input real power in watts. Most UPSs do not report + this XCP data" + ::= { upsInputEntry 4 } + +upsInputSource OBJECT-TYPE + SYNTAX INTEGER { + other(1), + + none(2), -- For example, Utility failure + primaryUtility(3), -- Normal utility feed to the UPS + bypassFeed(4), -- Bypass utility, separate from primaryUtility + secondaryUtility(5), -- Secondary utility feed (on a dual AC input UPS) + generator(6), -- Power provided by a generator + flywheel(7), -- Power provided by a flywheel (not necessarily AC) + fuelcell(8) -- Power provided by fuel cell(s) (not necessarily AC) + } + ACCESS read-only + + STATUS mandatory + DESCRIPTION + "The present external source of input power. The enumeration + none(2) indicates that there is no external source of + power, for example, the UPS is On Battery (an internal source). + The bypassFeed(4) can only be used when the Bypass source is known + to be a separate utility feed than the primaryUtility(3)." + ::= { upsInput 5 } + + +-- ==================================================================================== +-- +-- ups OBJECT IDENTIFIER ::= {cpqPower 3} +-- upsOutput OBJECT IDENTIFIER ::= { ups 4 } +-- UPS Output group +-- OID= .1.3.6.1.4.1.232.165.3.4 + +upsOutputLoad OBJECT-TYPE + SYNTAX INTEGER (0..200) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The UPS output load in percent of rated capacity." + ::= { upsOutput 1 } + +upsOutputFrequency OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) -- UNITS 0.1 Hertz + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The measured UPS output frequency in tenths of Hz." + ::= { upsOutput 2 } + +upsOutputNumPhases OBJECT-TYPE + SYNTAX INTEGER (0..6) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of metered output phases, serves as the table + index." + ::= { upsOutput 3 } + +upsOutputTable OBJECT-TYPE + SYNTAX SEQUENCE OF UpsOutputEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "The Aggregate Object with number of entries equal to NumPhases + and including the UpsOutput group." + ::= { upsOutput 4 } + +upsOutputEntry OBJECT-TYPE + SYNTAX UpsOutputEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Output Table Entry containing voltage, current, etc." + INDEX { upsOutputPhase } + ::= { upsOutputTable 1 } + +UpsOutputEntry ::= SEQUENCE { + upsOutputPhase INTEGER, + upsOutputVoltage INTEGER, + upsOutputCurrent INTEGER, + upsOutputWatts INTEGER + } + +upsOutputPhase OBJECT-TYPE + SYNTAX INTEGER (0..6) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number {1..3} of the output phase." + ::= { upsOutputEntry 1 } + +upsOutputVoltage OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) -- UNITS RMS Volts + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The measured output voltage from the UPS metering in volts." + ::= { upsOutputEntry 2 } + +upsOutputCurrent OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) -- UNITS RMS Amp + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The measured UPS output current in amps." + ::= { upsOutputEntry 3 } + +upsOutputWatts OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) -- UNITS Watts + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The measured real output power in watts." + ::= { upsOutputEntry 4 } + +upsOutputSource OBJECT-TYPE + SYNTAX INTEGER { + other(1), + none(2), + normal(3), -- normal, single UPS module output + bypass(4), + battery(5), + booster(6), -- Single or Double Boost, line-interactive UPSs only + reducer(7), -- Buck, line-interactive UPSs only + parallelCapacity(8), -- normal enhanced by Parallel for Capacity operation + parallelRedundant(9), -- normal enhanced by Redundant Parallel operation + highEfficiencyMode(10) -- normal enhanced by High Efficiency mode + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The present source of output power. The enumeration + none(2) indicates that there is no source of output + power (and therefore no output power), for example, + the system has opened the output breaker." + ::= { upsOutput 5 } + + +-- ==================================================================================== +-- +-- ups OBJECT IDENTIFIER ::= {cpqPower 3} +-- upsBypass OBJECT IDENTIFIER ::= { ups 5 } +-- UPS Bypass group +-- OID= .1.3.6.1.4.1.232.165.3.5 + +upsBypassFrequency OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) -- UNITS 0.1 Hertz + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The bypass frequency in tenths of Hz." + ::= { upsBypass 1 } + +upsBypassNumPhases OBJECT-TYPE + SYNTAX INTEGER (0..6) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of lines in the UPS bypass table." + ::= { upsBypass 2 } + +upsBypassTable OBJECT-TYPE + SYNTAX SEQUENCE OF UpsBypassEntry + ACCESS not-accessible + STATUS mandatory + ::= { upsBypass 3 } + +upsBypassEntry OBJECT-TYPE + SYNTAX UpsBypassEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Entry in the UpsBypassTable." + INDEX { upsBypassPhase } + ::= { upsBypassTable 1 } + +UpsBypassEntry ::= SEQUENCE { + upsBypassPhase INTEGER, + upsBypassVoltage INTEGER + } + +upsBypassPhase OBJECT-TYPE + SYNTAX INTEGER (0..6) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The Bypass Phase, index for the table." + ::= { upsBypassEntry 1 } + +upsBypassVoltage OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) -- UNITS RMS Volts + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The measured UPS bypass voltage in volts." + ::= { upsBypassEntry 2 } + + +-- ==================================================================================== +-- +-- ups OBJECT IDENTIFIER ::= {cpqPower 3} +-- upsEnvironment OBJECT IDENTIFIER ::= { ups 6 } +-- UPS Environment group +-- OID= .1.3.6.1.4.1.232.165.3.6 + +upsEnvAmbientTemp OBJECT-TYPE + SYNTAX INTEGER (-100..200) -- UNITS Degrees Centigrade + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The reading of the ambient temperature in the vicinity of the + UPS or SNMP agent." + ::= { upsEnvironment 1 } + +upsEnvAmbientLowerLimit OBJECT-TYPE + SYNTAX INTEGER (-100..200) -- UNITS Degrees Centigrade + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The Lower Limit of the ambient temperature; if UpsEnvAmbientTemp + falls below this value, the UpsAmbientTempBad alarm will occur." + ::= { upsEnvironment 2 } + +upsEnvAmbientUpperLimit OBJECT-TYPE + SYNTAX INTEGER (-100..200) -- UNITS Degrees Centigrade + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The Upper Limit of the ambient temperature; if UpsEnvAmbientTemp + rises above this value, the UpsAmbientTempBad alarm will occur. + This value should be greater than UpsEnvAmbientLowerLimit." + ::= { upsEnvironment 3 } + +upsEnvAmbientHumidity OBJECT-TYPE + SYNTAX INTEGER (0..100) -- UNITS % + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The reading of the ambient humidity in the vicinity of the + UPS or SNMP agent." + ::= { upsEnvironment 4 } + +upsEnvRemoteTemp OBJECT-TYPE + SYNTAX INTEGER (-100..200) -- UNITS Degrees Centigrade + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The reading of a remote temperature sensor connected to the + UPS or SNMP agent." + ::= { upsEnvironment 5 } + +upsEnvRemoteHumidity OBJECT-TYPE + SYNTAX INTEGER (0..100) -- UNITS % + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The reading of a remote humidity sensor connected to the + UPS or SNMP agent." + ::= { upsEnvironment 6 } + +-- +-- The Environmental Contact Sensing Table +-- Contains the table for monitoring all contacts (digital +-- inputs). +-- + +upsEnvNumContacts OBJECT-TYPE + SYNTAX INTEGER (1..1024) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of Contacts in the UpsContactsTable. + This object indicates the number of rows in the + UpsContactsTable." + ::= { upsEnvironment 7 } + +upsContactsTable OBJECT-TYPE + SYNTAX SEQUENCE OF UpsContactsTableEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A list of Contact Sensing table entries. + The number of entries is given by the value of + UpsEnvNumContacts." + ::= { upsEnvironment 8 } + +upsContactsTableEntry OBJECT-TYPE + SYNTAX UpsContactsTableEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "An entry containing information applicable + to a particular Contact input." + INDEX { upsContactIndex } + ::= { upsContactsTable 1 } + +UpsContactsTableEntry ::= SEQUENCE { + upsContactIndex INTEGER, + upsContactType INTEGER, + upsContactState INTEGER, + upsContactDescr DisplayString + } + +upsContactIndex OBJECT-TYPE + SYNTAX INTEGER (1..1024) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The Contact identifier; identical to the Contact Number." + ::= { upsContactsTableEntry 1 } + +upsContactType OBJECT-TYPE + SYNTAX INTEGER { + normallyOpen(1), -- or Input Normally High + normallyClosed(2), -- or Input Normally Low + anyChange(3), -- No normal Open/Closed state + notUsed(4) -- Contact not in service + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The normal state for this contact. The 'other' + state is the Active state for generating the UpstdContactActiveNotice + trap. If anyChange(3) is selected, then this trap is sent + any time the contact changes to either Open or Closed. + No traps are sent if the Contact is set to notUsed(4). + In many cases, the configuration for Contacts may be done by other + means, so this object may be read-only." + ::= { upsContactsTableEntry 2 } + +upsContactState OBJECT-TYPE + SYNTAX INTEGER { + open(1), + closed(2), + openWithNotice(3), + closedWithNotice(4) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The current state of the Contact input; + the value is based on the open/closed input state + and the setting for UpsContactType. + When entering the openWithNotice(3) and closedWithNotice(4) + states, no entries added to the UpsAlarmTable, but + the UpstdContactActiveNotice trap is sent." + ::= { upsContactsTableEntry 3 } + +upsContactDescr OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..63)) + ACCESS read-write + STATUS mandatory + DESCRIPTION + "A label identifying the Contact. This object should be + set by the administrator." + ::= { upsContactsTableEntry 4 } + +upsEnvRemoteTempLowerLimit OBJECT-TYPE + SYNTAX INTEGER (-100..200) -- UNITS Degrees Centigrade + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The Lower Limit of the remote temperature; if UpsEnvRemoteTemp + falls below this value, the UpsRemoteTempBad alarm will occur." + ::= { upsEnvironment 9 } + +upsEnvRemoteTempUpperLimit OBJECT-TYPE + SYNTAX INTEGER (-100..200) -- UNITS Degrees Centigrade + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The Upper Limit of the remote temperature; if UpsEnvRemoteTemp + rises above this value, the UpsRemoteTempBad alarm will occur. + This value should be greater than UpsEnvRemoteTempLowerLimit." + ::= { upsEnvironment 10 } + +upsEnvRemoteHumidityLowerLimit OBJECT-TYPE + SYNTAX INTEGER (0..100) -- UNITS % + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The Lower Limit of the remote humidity reading; if UpsEnvRemoteHumidity + falls below this value, the UpsRemoteHumidityBad alarm will occur." + ::= { upsEnvironment 11 } + +upsEnvRemoteHumidityUpperLimit OBJECT-TYPE + SYNTAX INTEGER (0..100) -- UNITS % + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The Upper Limit of the remote humidity reading; if UpsEnvRemoteHumidity + rises above this value, the UpsRemoteHumidityBad alarm will occur. + This value should be greater than UpsEnvRemoteHumidityLowerLimit." + ::= { upsEnvironment 12 } + + +-- ==================================================================================== +-- +-- ups OBJECT IDENTIFIER ::= {cpqPower 3} +-- upsTest OBJECT IDENTIFIER ::= { ups 7 } +-- UPS Test group +-- OID= .1.3.6.1.4.1.232.165.3.7 + + +upsTestBattery OBJECT-TYPE + SYNTAX INTEGER { startTest (1) } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Setting this variable to startTest initiates the + battery test. All other set values are invalid." + ::= { upsTest 1 } + +upsTestBatteryStatus OBJECT-TYPE + SYNTAX INTEGER { + unknown (1), + passed (2), + failed (3), + inProgress (4), + notSupported (5), + inhibited (6), + scheduled (7) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Reading this enumerated value gives an indication of the + UPS Battery test status." + ::= { upsTest 2 } + +upsTestTrap OBJECT-TYPE + SYNTAX INTEGER { startTestTrap (1) } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Setting startTestTrap to 1 will initiate a TrapTest + is sent out from HPMM. All other set values are invalid." + ::= { upsTest 3 } + +-- ==================================================================================== +-- +-- ups OBJECT IDENTIFIER ::= {cpqPower 3} +-- upsControl OBJECT IDENTIFIER ::= { ups 8 } +-- UPS Control group +-- OID= .1.3.6.1.4.1.232.165.3.8 + + +upsControlOutputOffDelay OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) -- UNITS seconds + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Setting this value to other than zero will cause the UPS + output to turn off after the number of seconds. + Setting it to 0 will cause an attempt to abort a pending + shutdown." + ::= { upsControl 1 } + +upsControlOutputOnDelay OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) -- UNITS seconds + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Setting this value to other than zero will cause the UPS + output to turn on after the number of seconds. + Setting it to 0 will cause an attempt to abort a pending + startup." + ::= { upsControl 2 } + +upsControlOutputOffTrapDelay OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) -- UNITS seconds + ACCESS read-write + STATUS mandatory + DESCRIPTION + "When UpsControlOutputOffDelay reaches this value, a trap will + be sent." + ::= { upsControl 3 } + +upsControlOutputOnTrapDelay OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) -- UNITS seconds + ACCESS read-write + STATUS deprecated + DESCRIPTION + "When UpsControlOutputOnDelay reaches this value, a + UpsOutputOff trap will be sent." + ::= { upsControl 4 } + +upsControlToBypassDelay OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) -- UNITS seconds + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Setting this value to other than zero will cause the UPS + output to go to Bypass after the number of seconds. + If the Bypass is unavailable, this may cause the UPS + to not supply power to the load. + Setting it to 0 will cause an attempt to abort a pending + shutdown." + ::= { upsControl 5 } + +upsLoadShedSecsWithRestart OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) -- UNITS seconds + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Setting this value will cause the UPS output to turn off + after the set number of seconds, then restart (after a UPS-defined + 'down time') when the utility is again available. + Unlike UpsControlOutputOffDelay, which might or might not, + this object always maps to the XCP 0x8A Load Dump & Restart command, + so the desired shutdown and restart behavior is guaranteed to happen. + Once set, this command cannot be aborted. + This is the preferred Control object to use when performing an On + Battery OS Shutdown." + ::= { upsControl 6 } + + +-- ==================================================================================== +-- +-- ups OBJECT IDENTIFIER ::= {cpqPower 3} +-- upsConfig OBJECT IDENTIFIER ::= { ups 9 } +-- UPS Config group +-- OID= .1.3.6.1.4.1.232.165.3.9 + + +upsConfigOutputVoltage OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) -- UNITS RMS Volts + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The nominal UPS Output voltage per phase in volts." + ::= { upsConfig 1 } + +upsConfigInputVoltage OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) -- UNITS RMS Volts + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The nominal UPS Input voltage per phase in volts." + ::= { upsConfig 2 } + +upsConfigOutputWatts OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) -- UNITS Watts + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The nominal UPS available real power output in watts." + ::= { upsConfig 3} + +upsConfigOutputFreq OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) -- UNITS 0.1 Hertz + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The nominal output frequency in tenths of Hz." + ::= { upsConfig 4 } + +upsConfigDateAndTime OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..22)) + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Date and time information for the UPS. Setting this variable + will initiate a set UPS date and time to this value. Reading + this variable will return the UPS time and date. This value + is not referenced to sysUpTime. It is simply the clock value + from the UPS real time clock. + Format is as follows: MM/DD/YYYY:HH:MM:SS." + ::= { upsConfig 5 } + +upsConfigLowOutputVoltageLimit OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) -- UNITS RMS Volts + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The Lower limit for acceptable Output Voltage, per the UPS + specifications." + ::= { upsConfig 6 } + +upsConfigHighOutputVoltageLimit OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) -- UNITS RMS Volts + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The Upper limit for acceptable Output Voltage, per the UPS + specifications." + ::= { upsConfig 7 } + + +-- ==================================================================================== +-- +-- ups OBJECT IDENTIFIER ::= {cpqPower 3} +-- upsRecep OBJECT IDENTIFIER ::= { ups 10 } +-- UPS Recep group +-- +-- (Note that the terms Receptacle, Outlet, and Load Group are used interchangeably +-- here and all mean "one of a set of controllable, power-switched outputs") +-- OID= .1.3.6.1.4.1.232.165.3.10 + + +upsNumReceptacles OBJECT-TYPE + SYNTAX INTEGER (0..64) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of independently controllable Receptacles, as described in the + UpsRecepTable." + ::= { upsRecep 1 } + +upsRecepTable OBJECT-TYPE + SYNTAX SEQUENCE OF UpsRecepEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION "The Aggregate Object with number of entries equal to + NumReceptacles and including the UpsRecep group." + ::={ upsRecep 2 } + +upsRecepEntry OBJECT-TYPE + SYNTAX UpsRecepEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION "The Recep table entry, etc." + INDEX { upsRecepIndex } + ::= { upsRecepTable 1 } + +UpsRecepEntry ::= SEQUENCE { + upsRecepIndex INTEGER, + upsRecepStatus INTEGER, + upsRecepOffDelaySecs INTEGER, + upsRecepOnDelaySecs INTEGER, + upsRecepAutoOffDelay INTEGER, + upsRecepAutoOnDelay INTEGER, + upsRecepShedSecsWithRestart INTEGER + } + +upsRecepIndex OBJECT-TYPE + SYNTAX INTEGER (1..64) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of the Receptacle. Serves as index for Receptacle table." + ::= { upsRecepEntry 1 } + +upsRecepStatus OBJECT-TYPE + SYNTAX INTEGER { + on(1), off(2), pendingOff(3), pendingOn(4), unknown(5) } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The Recep Status 1=On/Close, 2=Off/Open, 3=On w/Pending Off, + 4=Off w/Pending ON, 5=Unknown." + ::={ upsRecepEntry 2 } + +upsRecepOffDelaySecs OBJECT-TYPE + SYNTAX INTEGER (-1..2147483647) -- UNITS seconds + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The Delay until the Receptacle is turned Off. Setting + this value to other than -1 will cause the UPS output to + turn off after the number of seconds (0 is immediately). + Setting it to -1 will cause an attempt to abort a pending shutdown. + When this object is set while the UPS is On Battery, it is not necessary + to set UpsRecepOnDelaySecs, since the outlet will turn back on + automatically when power is available again." + ::= { upsRecepEntry 3 } + +upsRecepOnDelaySecs OBJECT-TYPE + SYNTAX INTEGER (-1..2147483647) -- UNITS seconds + ACCESS read-write + STATUS mandatory + DESCRIPTION + " The Delay until the Receptacle is turned On. Setting + this value to other than -1 will cause the UPS output to + turn on after the number of seconds (0 is immediately). + Setting it to -1 will cause an attempt to abort a pending restart." + ::={ upsRecepEntry 4 } + + +upsRecepAutoOffDelay OBJECT-TYPE + SYNTAX INTEGER (-1..32767) -- UNITS seconds + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The delay after going On Battery until the Receptacle is + automatically turned Off. A value of -1 means that this Output should + never be turned Off automatically, but must be turned Off only by command. + Values from 0 to 30 are valid, but probably innappropriate. + The AutoOffDelay can be used to prioritize loads in the event of a prolonged + power outage; less critical loads will turn off earlier to extend battery + time for the more critical loads. If the utility power is restored before the + AutoOff delay counts down to 0 on an outlet, that outlet will not turn Off." + ::= { upsRecepEntry 5 } + +upsRecepAutoOnDelay OBJECT-TYPE + SYNTAX INTEGER (-1..32767) -- UNITS seconds + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Seconds delay after the Outlet is signaled to turn On before the Output is + Automatically turned ON. A value of -1 means that this Output should never + be turned On automatically, but only when specifically commanded to do so. + A value of 0 means that the Receptacle should come On immediately + at power-up or for an On command." + ::= { upsRecepEntry 6 } + +-- UpsRecepAutoOnDelay has three purposes: +-- 1. To coordinate the automatic startup of various outlets, when the normal +-- auto-sequencing of 1 second per outlet is not adequate. For example, they may +-- be used to power up hard disk arrays before CPU units are started. +-- 2. To force additional 'Down Time' during UpsRecepOffDelaySecs commands, for +-- equipment to be reset, when the standard 'Down Time' is not long enough. +-- 3. For the -1 value, to ensure that loads won?t be powered until commanded, +-- following power-up or a UpsRecepOffDelaySecs command. + +upsRecepShedSecsWithRestart OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) -- UNITS seconds + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Setting this value will cause the UPS output to turn off + after the set number of seconds, then restart (after a UPS-defined + 'down time') when the utility is again available. + Unlike UpsRecepOffDelaySecs, which might or might not, + this object always maps to the XCP 0x8A Load Dump & Restart command, + so the desired shutdown and restart behavior is guaranteed to happen. + Once set, this command cannot be aborted." + ::= { upsRecepEntry 7 } + + + +-- ==================================================================================== +-- +-- ups OBJECT IDENTIFIER ::= {cpqPower 3} +-- upsTopology OBJECT IDENTIFIER ::= { ups 11 } +-- UPS Topology group +-- OID= .1.3.6.1.4.1.232.165.3.11 + + +upsTopologyType OBJECT-TYPE + SYNTAX INTEGER (0..32767) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Value which denotes the type of UPS by its power topology. Values are the + same as those described in the XCP Topology block's Overall Topology field." + ::= { upsTopology 1 } + +upsTopoMachineCode OBJECT-TYPE + SYNTAX INTEGER (0..32767) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "ID Value which denotes the Compaq/HP model of the UPS for software. Values + are the same as those described in the XCP Configuration block's Machine Code + field." + ::= { upsTopology 2 } + +upsTopoUnitNumber OBJECT-TYPE + SYNTAX INTEGER (0..64) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Identifies which unit and what type of data is being reported. + A value of 0 means that this MIB information comes from the top-level system + view (eg, manifold module or system bypass cabinet reporting total system + output). Standalone units also use a value of 0, since they are the 'full + system' view. + A value of 1 or higher indicates the number of the module in the system + which is reporting only its own data in the HP MIB objects." + ::= { upsTopology 3 } + +upsTopoPowerStrategy OBJECT-TYPE + SYNTAX INTEGER { + highAlert(1), standard(2), enableHighEfficiency(3), + immediateHighEfficiency(4) } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Value which denotes which Power Strategy is currently set for the UPS. + The values are: + highAlert(1) - The UPS shall optimize its operating state to maximize its + power-protection levels. This mode will be held for at most 24 hours. + standard(2) - Balanced, normal power protection strategy. UPS will not enter + HE operating mode from this setting. + enableHighEfficiency(3) - The UPS is enabled to enter HE operating mode to + optimize its operating state to maximize its efficiency, when + conditions change to permit it (as determined by the UPS). + forceHighEfficiency(4) - If this value is permitted to be Set for this UPS, + and if conditions permit, requires the UPS to enter High Efficiency + mode now, without delay (for as long as utility conditions permit). + After successfully set to forceHighEfficiency(4), + UpsTopoPowerStrategy changes to value enableHighEfficiency(3). + UpsOutputSource will indicate if the UPS status is actually operating in + High Efficiency mode." + ::= { upsTopology 4 } + +-- ==================================================================================== +-- Power Distribution Rack +-- ==================================================================================== +-- +-- pdr OBJECT IDENTIFIER ::= {cpqPower 4} +-- pdrIdent OBJECT IDENTIFIER ::= { pdr 1 } +-- PDR identification group +-- OID= .1.3.6.1.4.1.232.165.4.1 + +pdrName OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..63)) + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The string identify the device." + ::= { pdrIdent 1 } + +pdrModel OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..63)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The Device Model." + ::= { pdrIdent 2 } + +pdrManufacturer OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..63)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The Device Manufacturer Name (e.g. Hewlett-Packard)." + ::= { pdrIdent 3 } + +pdrFirmwareVersion OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..63)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The firmware revision level of the device." + ::= { pdrIdent 4 } + +pdrPartNumber OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..63)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The device part number." + ::= { pdrIdent 5 } + +pdrSerialNumber OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..63)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The PDR's serial number." + ::= { pdrIdent 6 } + +pdrVARating OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) -- UNITS Volts-amps + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The VA Rating of this PDR (all phases)" + ::= { pdrIdent 7 } + +pdrNominalOutputVoltage OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) -- UNITS RMS Volts + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The nominal Output Voltage may differ from the nominal + Input Voltage if the PDR has an input transformer" + ::= { pdrIdent 8 } + +pdrNumPhases OBJECT-TYPE + SYNTAX INTEGER (1..3) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of phases for this PDR" + ::= { pdrIdent 9 } + +pdrNumPanels OBJECT-TYPE + SYNTAX INTEGER (0..100) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of panels or subfeeds in this PDR" + ::= { pdrIdent 10 } + +pdrNumBreakers OBJECT-TYPE + SYNTAX INTEGER (0..100) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of breakers in this PDR" + ::= { pdrIdent 11 } + +-- ==================================================================================== +-- +-- pdr OBJECT IDENTIFIER ::= {cpqPower 4} +-- pdrPanel OBJECT IDENTIFIER ::= { pdr 2 } +-- PDR Panel Meters +-- OID= .1.3.6.1.4.1.232.165.4.2 + +pdrPanelTable OBJECT-TYPE + SYNTAX SEQUENCE OF PdrPanelEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION "Aggregate Object with number of entries equal to + pdrNumPanels" + ::= { pdrPanel 1 } + +pdrPanelEntry OBJECT-TYPE + SYNTAX PdrPanelEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "The panel table entry containing all power parameters + for each panel." + INDEX { pdrPanelIndex } + ::= { pdrPanelTable 1 } + +PdrPanelEntry ::= SEQUENCE { + pdrPanelIndex INTEGER, + pdrPanelFrequency INTEGER, + pdrPanelPower INTEGER, + pdrPanelRatedCurrent INTEGER, + pdrPanelMonthlyKWH INTEGER, + pdrPanelYearlyKWH INTEGER, + pdrPanelTotalKWH INTEGER, + pdrPanelVoltageA INTEGER, + pdrPanelVoltageB INTEGER, + pdrPanelVoltageC INTEGER, + pdrPanelCurrentA INTEGER, + pdrPanelCurrentB INTEGER, + pdrPanelCurrentC INTEGER, + pdrPanelLoadA INTEGER, + pdrPanelLoadB INTEGER, + pdrPanelLoadC INTEGER + } + +pdrPanelIndex OBJECT-TYPE + SYNTAX INTEGER (0..10) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Index for the pdrPanelEntry table." + ::= { pdrPanelEntry 1} + +pdrPanelFrequency OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) -- UNITS 0.1 Hertz + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The present frequency reading for the panel voltage." + ::= { pdrPanelEntry 2 } + +pdrPanelPower OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) -- Units 0.1 KW + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The present power of the panel." + ::= { pdrPanelEntry 3 } + +pdrPanelRatedCurrent OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) -- Units 0.1 A + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The present rated current of the panel." + ::= { pdrPanelEntry 4 } + +pdrPanelMonthlyKWH OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) -- Units 0.01 KWH + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The accumulated KWH for this panel since the beginning of this + calendar month or since the last reset." + ::= { pdrPanelEntry 5 } + +pdrPanelYearlyKWH OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) -- Units 0.01 KWH + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The accumulated KWH for this panel since the beginning of this + calendar year or since the last reset." + ::= { pdrPanelEntry 6 } + +pdrPanelTotalKWH OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) -- Units 0.01 KWH + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The accumulated KWH for this panel since it was put into service + or since the last reset." + ::= { pdrPanelEntry 7 } + +pdrPanelVoltageA OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) -- UNITS 0.1 V + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The measured panel output voltage." + ::= {pdrPanelEntry 8} + +pdrPanelVoltageB OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) -- UNITS 0.1 V + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The measured panel output voltage." + ::= {pdrPanelEntry 9} + +pdrPanelVoltageC OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) -- UNITS 0.1 V + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The measured panel output voltage." + ::= {pdrPanelEntry 10} + +pdrPanelCurrentA OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) -- UNITS 0.1 A + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The measured panel output current." + ::= {pdrPanelEntry 11} + +pdrPanelCurrentB OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) -- UNITS 0.1 A + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The measured panel output current." + ::= {pdrPanelEntry 12} + +pdrPanelCurrentC OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) -- UNITS 0.1 A + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The measured panel output current." + ::= {pdrPanelEntry 13} + +pdrPanelLoadA OBJECT-TYPE + SYNTAX INTEGER (0..200) -- UNITS 0.1 percent + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The percentage of load is the ratio of each output + current to the rated output current to the panel." + ::= {pdrPanelEntry 14} + +pdrPanelLoadB OBJECT-TYPE + SYNTAX INTEGER (0..200) -- UNITS 0.1 percent + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The percentage of load is the ratio of each output + current to the rated output current to the panel." + ::= {pdrPanelEntry 15} + +pdrPanelLoadC OBJECT-TYPE + SYNTAX INTEGER (0..200) -- UNITS 0.1 percent + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The percentage of load is the ratio of each output + current to the rated output current to the panel." + ::= {pdrPanelEntry 16} + + +-- ==================================================================================== +-- +-- pdr OBJECT IDENTIFIER ::= {cpqPower 4} +-- pdrBreaker OBJECT IDENTIFIER ::= { pdr 3 } +-- Based on physical installed Breakers +-- OID= .1.3.6.1.4.1.232.165.4.3 + +pdrBreakerTable OBJECT-TYPE + SYNTAX SEQUENCE OF PdrBreakerEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "List of breaker table entries. The number of entries + is given by pdrNumBreakers for this panel." + ::= { pdrBreaker 1 } + +pdrBreakerEntry OBJECT-TYPE + SYNTAX PdrBreakerEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "An entry containing information applicable to a + particular output breaker of a particular panel." + INDEX { pdrPanelIndex, pdrBreakerIndex } + ::= { pdrBreakerTable 1 } + +PdrBreakerEntry ::= SEQUENCE { + pdrBreakerIndex INTEGER, + pdrBreakerPanel INTEGER, + pdrBreakerNumPosition INTEGER, + pdrBreakerNumPhases INTEGER, + pdrBreakerNumSequence INTEGER, + pdrBreakerRatedCurrent INTEGER, + pdrBreakerMonthlyKWH INTEGER, + pdrBreakerYearlyKWH INTEGER, + pdrBreakerTotalKWH INTEGER, + pdrBreakerCurrent INTEGER, + pdrBreakerCurrentPercent INTEGER, + pdrBreakerPower INTEGER, + pdrBreakerPercentWarning INTEGER, + pdrBreakerPercentOverload INTEGER + } + +pdrBreakerIndex OBJECT-TYPE + SYNTAX INTEGER (0..200) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The index of breakers. 42 breakers in each panel, + arranged in odd and even columns" + ::= { pdrBreakerEntry 1 } + +pdrBreakerPanel OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The index of panel that these breakers are installed on." + ::= { pdrBreakerEntry 2 } + +pdrBreakerNumPosition OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The position of this breaker in the panel, 1-phase breaker + or n-m breaker for 2-phase or n-m-k breaker for 3-phase." + ::= { pdrBreakerEntry 3 } + +pdrBreakerNumPhases OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of phase for this particular breaker." + ::= { pdrBreakerEntry 4 } + +pdrBreakerNumSequence OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The sequence of this breaker. i.e. 1 for single phase + 1,2 for 2-phase or 1,2,3 for 3-phase." + ::= { pdrBreakerEntry 5 } + +pdrBreakerRatedCurrent OBJECT-TYPE + SYNTAX INTEGER -- UNITS 0.1 A + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The rated current in Amps for this particular breaker." + ::= { pdrBreakerEntry 6 } + +pdrBreakerMonthlyKWH OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) -- Units 0.01 KWH + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The accumulated KWH for this breaker since the beginning of this + calendar month or since the last reset." + ::= { pdrBreakerEntry 7 } + +pdrBreakerYearlyKWH OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) -- Units 0.01 KWH + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The accumulated KWH for this breaker since the beginning of this + calendar year or since the last reset." + ::= { pdrBreakerEntry 8 } + +pdrBreakerTotalKWH OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) -- Units 0.01 KWH + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The accumulated KWH for this breaker since it was put into service + or since the last reset." + ::= { pdrBreakerEntry 9 } + +pdrBreakerCurrent OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) -- UNITS RMS 0.1 A + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The measured output current for this breaker Current." + ::= { pdrBreakerEntry 10 } + +pdrBreakerCurrentPercent OBJECT-TYPE + SYNTAX INTEGER (0..200) -- UNITS 0.1 Percent + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The ratio of output current over rated + current for each breaker." + ::= { pdrBreakerEntry 11 } + +pdrBreakerPower OBJECT-TYPE + SYNTAX INTEGER -- UNITS Watts + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The power for this breaker in Watts." + ::= { pdrBreakerEntry 12 } + +pdrBreakerPercentWarning OBJECT-TYPE + SYNTAX INTEGER (0..200) -- UNITS 0.1 Percent + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The percentage of Warning set for this breaker." + ::= { pdrBreakerEntry 13 } + +pdrBreakerPercentOverload OBJECT-TYPE + SYNTAX INTEGER -- UNITS 0.1 Percent + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The percentage of Overload set for this breaker." + ::= { pdrBreakerEntry 14 } + +-- ==================================================================================== +-- modular smart PDU +-- ==================================================================================== +-- +-- mpdu OBJECT IDENTIFIER ::= {cpqPower 5} +-- mpduIdent OBJECT IDENTIFIER ::= { mpdu 1 } +-- MPDU (or iPDU) identification group +-- OID= .1.3.6.1.4.1.232.165.5.1 + +mpduNumMPDU OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of Modular PDUs (Core) detected." + ::= { mpduIdent 1 } + +mpduIdentTable OBJECT-TYPE + SYNTAX SEQUENCE OF MpduIdentEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION "Indexed by mpduNumMPDU. So aggregate objects for each entry equal to mpduNumMPDU + before go to the next entry. i.e if 4 MPDU detected, display 4 indexes, 4 + Manufacturers, 4 Models..., start with 1." + ::= { mpduIdent 2 } + +mpduIdentEntry OBJECT-TYPE + SYNTAX MpduIdentEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION "The table entry containing the identifications of each MPDU as well + as names of PDR panel, location of MPDU in a Data Center." + INDEX { mpduIdentIndex } + ::= { mpduIdentTable 1 } + +MpduIdentEntry ::= SEQUENCE { + mpduIdentIndex INTEGER, + mpduManufacturer DisplayString, + mpduModel DisplayString, + mpduName DisplayString, + mpduFirmwareVersion DisplayString, + mpduHardwareVersion DisplayString, + mpduPartNumber DisplayString, + mpduSerialNumber DisplayString, + mpduUUID DisplayString, + mpduIP DisplayString, + mpduMACAddress DisplayString, + mpduControlStatus DisplayString, + mpduRegion DisplayString, + mpduType DisplayString, + mpduPowerRating DisplayString, + mpduInputRating DisplayString, + mpduInputPlug DisplayString, + mpduNumBreakers INTEGER, + mpduNumOutlet INTEGER, + mpduUHeight INTEGER, + mpduRedundantStatus DisplayString, + mpduNumSmartExtBar INTEGER, + mpduPanelName DisplayString, + mpduPanelBreakerName DisplayString, + mpduPanelBreakerRating DisplayString, + mpduACFeedName DisplayString, + mpduFloorName DisplayString, + mpduRoomName DisplayString, + mpduRow DisplayString, + mpduRowPosition DisplayString, + mpduRackName DisplayString, + mpduRackHeight DisplayString, + mpduRackID DisplayString, + mpduUPosition INTEGER, + mpduPairedPDUUUID DisplayString, + mpduPairedPDUIP DisplayString, + mpduInstalledLocation INTEGER, + mpduTotalPowerWatt INTEGER, + mpduTotalPowerVA INTEGER, + mpduTotalPercentLoad INTEGER, + mpduRegionalNominalVoltage DisplayString + } + +mpduIdentIndex OBJECT-TYPE + SYNTAX INTEGER (0..100) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Index for the MpduIdentEntry table. Start with 1" + ::= { mpduIdentEntry 1 } + +mpduManufacturer OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + " The Core PDU manufacturer. StringLength=[21]" + ::= { mpduIdentEntry 2 } + +mpduModel OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The Core PDU model, marketing name. StringLength=[40]." + ::= { mpduIdentEntry 3 } + +mpduName OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The Core PDU name, descriptive name or hostname. StringLength=[16]." + ::= { mpduIdentEntry 4 } + +mpduFirmwareVersion OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The Core PDU firmware version(s). StringLength=[12]." + ::= { mpduIdentEntry 5 } + +mpduHardwareVersion OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The Core PDU hardware version. StringLength=[8]." + ::= { mpduIdentEntry 6 } + +mpduPartNumber OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The Core PDU part number. StringLength=[21]." + ::= { mpduIdentEntry 7 } + +mpduSerialNumber OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The PDU external serial number. StringLength=[21]." + ::= { mpduIdentEntry 8 } + +mpduUUID OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The PDU's UUID equals PN add SN then canonical conversion. StringLength=[37]." + ::= { mpduIdentEntry 9 } + +mpduIP OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The PDU's assigned IP. StringLength=[16]." + ::= { mpduIdentEntry 10 } + +mpduMACAddress OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The Core PDU MAC address. StringLength=[18]." + ::= { mpduIdentEntry 11 } + +mpduControlStatus OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The Core PDU Control Status: master or slave units. + StringLength=[31]." + ::= { mpduIdentEntry 12 } + +mpduRegion OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The PDU's Region: NA, Intl, Japan... StringLength=[7]." + ::= { mpduIdentEntry 13 } + +mpduType OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The PDU's Type: Delta, Wye, single, Wye+lowline. + StringLength=[24]." + ::= { mpduIdentEntry 14 } + +mpduPowerRating OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The PDU's Power Rating in KVA (Name Plate). Value is presented + in 1/100 of the KVA. i.e. 1750 means 17.50 KVA" + ::= { mpduIdentEntry 15 } + +mpduInputRating OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The PDU's Input Current Rating in A (Name Plate)" + ::= { mpduIdentEntry 16 } + +mpduInputPlug OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The PDU's Input Plug: IEC60309 516P6,NEMA L15-30P... + StringLength=[16]." + ::= { mpduIdentEntry 17 } + +mpduNumBreakers OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of breakers used in each MPDU (6 by default)." + ::= { mpduIdentEntry 18 } + +mpduNumOutlet OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of outlets of each MPDU (6 by default)." + ::= { mpduIdentEntry 19 } + +mpduUHeight OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The MPDU U Height 1U or 2 U (1U by default)." + ::= { mpduIdentEntry 20 } + +mpduRedundantStatus OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Status of Core PDU in paired or not: Stand-alone or Redundant. + StringLength=[12]." + ::= { mpduIdentEntry 21 } + +mpduNumSmartExtBar OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "total number of detected Smart Sticks connecting to each PDU." + ::= { mpduIdentEntry 22 } + +mpduPanelName OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Name of Panel that was entered by customer in GUI. + StringLength=[50]." + ::= { mpduIdentEntry 23 } + +mpduPanelBreakerName OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Name of breakers or Panel Position entered by customer in GUI. + StringLength=[50]." + ::= { mpduIdentEntry 24 } + +mpduPanelBreakerRating OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Breaker rating of the PDR Panel." + ::= { mpduIdentEntry 25 } + +mpduACFeedName OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "it would be A, B, Red, or White... + StringLength=[50]." + ::= { mpduIdentEntry 26 } + +mpduFloorName OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Name of building floor entered by customer in GUI. + StringLength=[50]." + ::= { mpduIdentEntry 27 } + +mpduRoomName OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Name of the room entered by customer in GUI. StringLength=[50]." + ::= { mpduIdentEntry 28 } + +mpduRow OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Data Center Row entered by customer in GUI. + StringLength=[11]." + ::= { mpduIdentEntry 29 } + +mpduRowPosition OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Position in Row entered by customer in GUI. Null will be returned + if not detected. StringLength=[11]." + ::= { mpduIdentEntry 30 } + +mpduRackName OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Name of the Rack entered by customer in GUI. Null will be returned + if not detected. StringLength=[50]." + ::= { mpduIdentEntry 31 } + +mpduRackHeight OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Rack Type (22U, 42U, 50U...). Null will be returned if not detected. + StringLength=[3]." + ::= { mpduIdentEntry 32 } + +mpduRackID OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "An unique ID to identify a rack, i.e. Rack SN. Null will be returned if + not detected. StringLength=[50]." + ::= { mpduIdentEntry 33 } + +mpduUPosition OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "PDU Rack bottom U Start position, core U position. Null will be returned if not detected." + ::= { mpduIdentEntry 34 } + +mpduPairedPDUUUID OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "UUID of the PDU paired with this one. Null will be returned if not detected. + StringLength=[50]." + ::= { mpduIdentEntry 35 } + +mpduPairedPDUIP OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "IP address of the PDU paired with this one. Null will be returned if not detected. + StringLength=[16]." + ::= { mpduIdentEntry 36 } + +mpduInstalledLocation OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "0=Left 0U side area or rack frame, 1= Right 0U side area or rack frame, 2= front RETMA rail, + 3=back RETMA rail) - spatial location. A value of -1 will be returned if not detected." + ::= { mpduIdentEntry 37 } + +mpduTotalPowerWatt OBJECT-TYPE + SYNTAX INTEGER -- Units Watts + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total power for the whole iPDU in Watts. A value + of -1 will be returned if the power is unable to be calculated." + ::= { mpduIdentEntry 38 } + +mpduTotalPowerVA OBJECT-TYPE + SYNTAX INTEGER -- Units VA + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total power for the whole iPDU in VA. A value + of -1 will be returned if the power is unable to be calculated." + ::= { mpduIdentEntry 39 } + +mpduTotalPercentLoad OBJECT-TYPE + SYNTAX INTEGER --UNITS 0.1 Percents + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The whole iPDU's load in percent of rated capacity. Value is + presented in 1/10 of the percentage i.e. 125 is 12.5%. A value + of -1 will be returned if the current is unable to be measured." + ::= { mpduIdentEntry 40 } + +mpduRegionalNominalVoltage OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "value is either America(208V), Japan(202V) or blank for International Model" + ::= { mpduIdentEntry 41 } + +-- ==================================================================================== +-- +-- mpdu OBJECT IDENTIFIER ::= {cpqPower 5} +-- mpduOutput OBJECT IDENTIFIER ::= { mpdu 2 } +-- MPDU (or iPDU) Output Measurements (6 Load Segments by default) +-- OID= .1.3.6.1.4.1.232.165.5.2 + +mpduOutputTable OBJECT-TYPE + SYNTAX SEQUENCE OF MpduOutputEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Indexed by mpduNumOutlet. So aggregate objects for each entry equal to (mpduNumMPDU + multiplies mpduNumOutlet) before go to the next entry. i.e if 4 MPDU detected, + display 6x4 indexes, 6x4 OutputStatus, 6x4 OutputBreakerRating...start with 1." + ::= { mpduOutput 1 } + +mpduOutputEntry OBJECT-TYPE + SYNTAX MpduOutputEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "The output table entry containing the voltage, current, PF, + percent load, VA, Watts for the Modular PDU." + + INDEX { mpduIdentIndex, mpduOutputIndex } + ::= { mpduOutputTable 1 } + +MpduOutputEntry ::= SEQUENCE { + mpduOutputIndex INTEGER, + mpduOutputStatus DisplayString, + mpduOutputBreakerRating INTEGER, + mpduOutputSmartDevice DisplayString, + mpduOutputPercentLoad INTEGER, + mpduOutputVoltage INTEGER, + mpduOutputCurrent INTEGER, + mpduOutputPowerVA INTEGER, + mpduOutputPowerWatt INTEGER, + mpduOutputPowerFactor INTEGER, + mpduOutputWarningThreshold INTEGER, + mpduOutputCriticalThreshold INTEGER, + mpduOutputPowerWattHour INTEGER + } + +mpduOutputIndex OBJECT-TYPE + SYNTAX INTEGER (0..100) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Index for the MpduOutputEntry table." + ::= { mpduOutputEntry 1 } + +mpduOutputStatus OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The overall status of the device: off, on, problem. StringLength=[7]." + ::= { mpduOutputEntry 2 } + +mpduOutputBreakerRating OBJECT-TYPE + SYNTAX INTEGER --UNITS A + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The rating of each MPDU Output in Ampere." + ::= { mpduOutputEntry 3 } + +mpduOutputSmartDevice OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A smart cord device detected: False, True. StringLength=[5]." + ::= { mpduOutputEntry 4 } + +mpduOutputPercentLoad OBJECT-TYPE + SYNTAX INTEGER --UNITS 0.1 Percents + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The MPDU's each output load in percent of rated capacity. Value is + presented in 1/10 of the percentage i.e. 125 is 12.5%. A value + of -1 will be returned if the current is unable to be measured." + ::= { mpduOutputEntry 5 } + +mpduOutputVoltage OBJECT-TYPE + SYNTAX INTEGER -- UNITS RMS 0.1 Volts + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The measured output voltage from the PDU meters in volts. Value is + presented in 1/10 of the Volt i.e. 2095 is 209.5 V. A value + of -1 will be returned if the voltage is unable to be measured." + ::= { mpduOutputEntry 6 } + +mpduOutputCurrent OBJECT-TYPE + SYNTAX INTEGER -- UNITS RMS 0.01 Amp + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The measured output current from the PDU meters in amps. Value is + presented in 1/100 of the Ampere i.e. 175 is 1.75 A. A value + of -1 will be returned if the current is unable to be measured." + ::= { mpduOutputEntry 7 } + +mpduOutputPowerVA OBJECT-TYPE + SYNTAX INTEGER -- Units VA + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total VA load (VI) measured on the PDU in VA. A value + of -1 will be returned if the power is unable to be calculated." + ::= { mpduOutputEntry 8 } + +mpduOutputPowerWatt OBJECT-TYPE + SYNTAX INTEGER -- Units Watts + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total power load measured on the PDU in Watts. A value + of -1 will be returned if the power is unable to be calculated." + ::= { mpduOutputEntry 9 } + +mpduOutputPowerFactor OBJECT-TYPE + SYNTAX INTEGER -- 0.01 UNITS + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The power factor is presented in 1/100 of the unit i.e. + 98 is 0.98. A value of -1 will be returned if the power factor is unable + to be measured." + ::= { mpduOutputEntry 10 } + +mpduOutputWarningThreshold OBJECT-TYPE + SYNTAX INTEGER -- Percents + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Report the User-set threshhold limit for Warning in percentage" + ::= { mpduOutputEntry 11 } + +mpduOutputCriticalThreshold OBJECT-TYPE + SYNTAX INTEGER -- Percents + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Report the User-set threshhold limit for Critical in percentage" + ::= { mpduOutputEntry 12 } + +mpduOutputPowerWattHour OBJECT-TYPE + SYNTAX INTEGER -- Units Watt-Hour (WH) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Support Billing Grade Energy Metering in Watt-Hour. A value + of -1 will be returned if the power is unable to be calculated." + ::= { mpduOutputEntry 13 } + + +-- ==================================================================================== +-- +-- mpdu OBJECT IDENTIFIER ::= {cpqPower 5} +-- mpduDeviceIdent OBJECT IDENTIFIER ::= { mpdu 3 } +-- ID of all Devices (power extension bars, servers) connected to MPDU Core's outlets +-- Smart Devices are those blades/servers/storage encl with smart power cord +-- OID= .1.3.6.1.4.1.232.165.5.3 + + +mpduDeviceIdentTable OBJECT-TYPE + SYNTAX SEQUENCE OF MpduDeviceIdentEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION "Indexed by mpduNumOutlet. So aggregate objects for each entry equal + to (mpduNumMPDU multiplies mpduNumOutlet) before go to the next entry. + i.e if 4 MPDU detected, display 6x4 indexes, 6x4 mpduDeviceStatus, 6x4 + DeviceUIDStatus...start with 1." + ::= { mpduDeviceIdent 1 } + +mpduDeviceIdentEntry OBJECT-TYPE + SYNTAX MpduDeviceIdentEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION "The ident table entry containing the name, model, + manufacturer, firmware version, part number... for + each smart device, null value for unknown device." + + INDEX { mpduIdentIndex, mpduDeviceIdentIndex } + ::= { mpduDeviceIdentTable 1 } + +MpduDeviceIdentEntry ::= SEQUENCE { + mpduDeviceIdentIndex INTEGER, + mpduDeviceStatus DisplayString, + mpduDeviceUIDStatus DisplayString, + mpduDeviceNumOutlet INTEGER, + mpduDeviceUHeight INTEGER, + mpduDevicePowerRating DisplayString, + mpduDeviceManufacturer DisplayString, + mpduDeviceType DisplayString, + mpduDeviceModel DisplayString, + mpduDeviceName DisplayString, + mpduDeviceFirmwareVersion DisplayString, + mpduDeviceHardwareVersion DisplayString, + mpduDevicePartNumber DisplayString, + mpduDeviceSerialNumber DisplayString, + mpduDeviceUUID DisplayString, + mpduDeviceIP DisplayString, + mpduDeviceMAC DisplayString, + mpduDevicePSUSlotNo INTEGER, + mpduDeviceUPosition INTEGER, + mpduDeviceDetectionThreshold INTEGER + } + +mpduDeviceIdentIndex OBJECT-TYPE + SYNTAX INTEGER (0..100) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Index is based on the total number of Smart Extension Bars plus + smart devices (with smart power cord i.e. blades) detected." + ::= { mpduDeviceIdentEntry 1 } + +mpduDeviceStatus OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The overall status of the device: off, on, problem. StringLength=[8]." + ::= { mpduDeviceIdentEntry 2 } + +mpduDeviceUIDStatus OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The overall status of the device UID: off, on, blink. StringLength=[8]." + ::= { mpduDeviceIdentEntry 3 } + +mpduDeviceNumOutlet OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of outlets of detected the device. This variable + indicates the number of rows in the breakers table. Default is 5" + ::= { mpduDeviceIdentEntry 4 } + +mpduDeviceUHeight OBJECT-TYPE + SYNTAX INTEGER --UNITS 0.01 + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The Unit height of ext bar or device. Some device supports non-integer. + Present value x100, when read back, divided by 100 to get 2 decimal points." + ::= { mpduDeviceIdentEntry 5 } + +mpduDevicePowerRating OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The device's Power Rating in VA. Null will be returned if not detected. + StringLength=[8]." + ::= { mpduDeviceIdentEntry 6 } + +mpduDeviceManufacturer OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The Device Manufacturer Name (e.g. Hewlett-Packard). + Null will be returned if not detected. StringLength=[16]." + ::= { mpduDeviceIdentEntry 7 } + +mpduDeviceType OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The Device's Type: Ext Bar, server, or network device... + StringLength=[16]." + ::= { mpduDeviceIdentEntry 8 } + +mpduDeviceModel OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The Device Model is Managed or Non-managed Ext Bar. + Null will be returned if not detected. StringLength=[24]." + ::= { mpduDeviceIdentEntry 9 } + +mpduDeviceName OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The string identify the Device. i.e. 'BAR#1' (descriptive name) + Null will be returned if not detected. StringLength=[32]." + ::= { mpduDeviceIdentEntry 10 } + +mpduDeviceFirmwareVersion OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The firmware revision level of Sm Ext Bar. Null will be returned if + not detected. StringLength=[8]." + ::= { mpduDeviceIdentEntry 11 } + +mpduDeviceHardwareVersion OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The hardware version of Sm Ext Bar. Null will be returned if not + detected. StringLength=[8]." + ::= { mpduDeviceIdentEntry 12 } + +mpduDevicePartNumber OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The device's part number. Null will be returned if not detected. + StringLength=[21]." + ::= { mpduDeviceIdentEntry 13 } + +mpduDeviceSerialNumber OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The device's serial number. Null will be returned if not detected. + StringLength=[21]." + ::= { mpduDeviceIdentEntry 14 } + +mpduDeviceUUID OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The device's UUID. Null will be returned if not detected. + StringLength=[37]." + ::= { mpduDeviceIdentEntry 15 } + +mpduDeviceIP OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The device's IP Address. Null will be returned if not detected. + StringLength=[16]." + ::= { mpduDeviceIdentEntry 16 } + +mpduDeviceMAC OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The device mgmt processor MAC Address. Null will be returned if + not detected. StringLength=[18]." + ::= { mpduDeviceIdentEntry 17 } + +mpduDevicePSUSlotNo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Device power supply logical slot number." + ::= { mpduDeviceIdentEntry 18 } + +mpduDeviceUPosition OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Device U start position." + ::= { mpduDeviceIdentEntry 19 } + +mpduDeviceDetectionThreshold OBJECT-TYPE + SYNTAX INTEGER -- UNITS .001 Amp + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Read device detection threshold between 10 and 50mA." + ::= { mpduDeviceIdentEntry 20 } + + +-- ==================================================================================== +-- +-- mpdu OBJECT IDENTIFIER ::= {cpqPower 5} +-- mpduSmExtBarOutlet OBJECT IDENTIFIER ::= { mpdu 4 } +-- Outputs measurements for each Smart Extension Bar's Outlet and +-- Identification of Smart Device connected to Smart Extension Bar. +-- OID= .1.3.6.1.4.1.232.165.5.4 + + +mpduSmExtBarOutletTable OBJECT-TYPE + SYNTAX SEQUENCE OF MpduSmExtBarOutletEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Indexed by mpduDeviceNumOutlet. So aggregate objects for each entry equal to + (mpduNumMPDU multiplies mpduNumOutlet multiplies mpduDeviceNumOutlet) before + go to the next entry. i.e if 4 MPDU detected, display 5x6x4 indexes, 5x6x4 + mpduSmExtBarOutletStatus, 5x6x4 mpduSmExtBarOutletUIDStatus...start with 1." + ::= { mpduSmExtBarOutlet 1 } + +mpduSmExtBarOutletEntry OBJECT-TYPE + SYNTAX MpduSmExtBarOutletEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Entries contain status, measurements for each outlet (no PowerVA) + Display null if it can't be measured or no device detected." + INDEX { mpduIdentIndex, mpduOutputIndex, mpduSmExtBarOutletIndex } + ::= { mpduSmExtBarOutletTable 1 } + +MpduSmExtBarOutletEntry ::= SEQUENCE { + mpduSmExtBarOutletIndex INTEGER, + mpduSmExtBarOutletStatus DisplayString, + mpduSmExtBarOutletUIDStatus DisplayString, + mpduSmExtBarOutletRating INTEGER, + mpduSmExtBarOutletVoltage INTEGER, + mpduSmExtBarOutletCurrent INTEGER, + mpduSmExtBarOutletPowerWatt INTEGER, + mpduSmExtBarOutletPowerFactor INTEGER, + mpduSmExtBarOutletDeviceName DisplayString, + mpduSmExtBarOutletDeviceUUID DisplayString, + mpduSmExtBarOutletDeviceProduct DisplayString, + mpduSmExtBarOutletDeviceIP DisplayString, + mpduSmExtBarOutletAutoDiscovered INTEGER, + mpduSmExtBarOutletDeviceMAC DisplayString, + mpduSmExtBarOutletDeviceSN DisplayString, + mpduSmExtBarOutletDevicePSSlotNo INTEGER, + mpduSmExtBarOutletDeviceUPosition INTEGER, + mpduSmExtBarOutletDeviceUHeight INTEGER, + mpduSmExtBarOutletDeviceInstalledLocation INTEGER, + mpduSmExtBarOutletPowerWattHour INTEGER + } + +mpduSmExtBarOutletIndex OBJECT-TYPE + SYNTAX INTEGER (0..100) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The Index of Smart Extension Bar." + ::= { mpduSmExtBarOutletEntry 1 } + +mpduSmExtBarOutletStatus OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The overall status of the Smart Extension Bar's outlet: off, on, problem... + StringLength=[3]." + ::= { mpduSmExtBarOutletEntry 2 } + +mpduSmExtBarOutletUIDStatus OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The overall status of the Smart Extension Bar's UID: off, on, blink... + StringLength=[8]." + ::= { mpduSmExtBarOutletEntry 3 } + +mpduSmExtBarOutletRating OBJECT-TYPE + SYNTAX INTEGER -- UNITS A + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Sm Ext Bar Outlet's Rating in Amp. A value of -1 will be returned + if the stick is unable to detect. StringLength=[8]." + ::= { mpduSmExtBarOutletEntry 4 } + +mpduSmExtBarOutletVoltage OBJECT-TYPE + SYNTAX INTEGER -- UNITS 0.1 Volts + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The SM Ext Bar voltage in volts. Value is presented 1/10 of the Volt + i.e. 2098 means 209.8 V. A value of -1 will be returned if the voltage is unable + to be measured." + ::= { mpduSmExtBarOutletEntry 5 } + +mpduSmExtBarOutletCurrent OBJECT-TYPE + SYNTAX INTEGER -- UNITS 0.01 Amps + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The SM Ext Bar current draw in Amps. Value is presented in 1/100 of the Ampere + i.e. 127 means 1.27 A. A value of -1 will be returned if the current is unable + to be measured." + ::= { mpduSmExtBarOutletEntry 6 } + +mpduSmExtBarOutletPowerWatt OBJECT-TYPE + SYNTAX INTEGER -- UNITS Watts + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The Sm Ext Bar's Power measured in Watts. A value of -1 will be returned if the + power is unable to be measured." + ::= { mpduSmExtBarOutletEntry 7 } + +mpduSmExtBarOutletPowerFactor OBJECT-TYPE + SYNTAX INTEGER -- 0.01 UNITS + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The outlet's power factor in 0.01 unit. It is presented in 1/100 of the unit. + i.e. 98 means 0.98. A value of -1 will be returned if the voltage is unable + to be measured." + ::= { mpduSmExtBarOutletEntry 8 } + +mpduSmExtBarOutletDeviceName OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The Device (Blade/Server/Storage) Name that connects to this + Sm Ext Bar Outlet. Null will be returned if not detected. StringLength=[50]." + ::= { mpduSmExtBarOutletEntry 9 } + +mpduSmExtBarOutletDeviceUUID OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The Device (Blade/Server/Storage) UUID that connects to this + Sm Ext Bar Outlet. Null will be returned if not detected. StringLength=[37]." + ::= { mpduSmExtBarOutletEntry 10 } + +mpduSmExtBarOutletDeviceProduct OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The Device (Blade/Server/Storage) Model that connects to this + Sm Ext Bar Outlet. Null will be returned if not detected. StringLength=[40]." + ::= { mpduSmExtBarOutletEntry 11 } + +mpduSmExtBarOutletDeviceIP OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The Device (Blade/Server/Storage) IP of iLO that connects to this + Sm Ext Bar Outlet. Null will be returned if not detected. StringLength=[16]." + ::= { mpduSmExtBarOutletEntry 12 } + +mpduSmExtBarOutletAutoDiscovered OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Boolean values of 0 or 1. 1 means this Sm Ext Bar Outlet is able to get information + from a blade with smart power supply (auto discovery is enabled)..." + ::= { mpduSmExtBarOutletEntry 13 } + +mpduSmExtBarOutletDeviceMAC OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The Device (Blade/Server/Storage) MAC address that connects to this + Sm Ext Bar Outlet. Null will be returned if not detected. StringLength=[18]." + ::= { mpduSmExtBarOutletEntry 14 } + +mpduSmExtBarOutletDeviceSN OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The Device (Blade/Server/Storage) Serial Number that connects to this + Sm Ext Bar Outlet. Null will be returned if not detected. StringLength=[21]." + ::= { mpduSmExtBarOutletEntry 15 } + +mpduSmExtBarOutletDevicePSSlotNo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The Device (Blade/Server/Storage) Power Supply' Slot Number that connects to this + Sm Ext Bar Outlet. A value of -1 will be returned if not detected." + ::= { mpduSmExtBarOutletEntry 16 } + + +mpduSmExtBarOutletDeviceUPosition OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Device U start position. A value of -1 will be returned if not detected." + ::= { mpduSmExtBarOutletEntry 17 } + +mpduSmExtBarOutletDeviceUHeight OBJECT-TYPE + SYNTAX INTEGER --UNITS 0.01 + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Device U height. Enter -1 if not detected. Some device supports non-integer. + Present value x100, when read back, divided by 100 to get 2 decimal points." + ::= { mpduSmExtBarOutletEntry 18 } + +mpduSmExtBarOutletDeviceInstalledLocation OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "0=Left 0U side area or rack frame, 1= Right 0U side area or rack frame, 2= front RETMA rail, + 3=back RETMA rail) - spatial location. A value of -1 will be returned if not detected." + ::= { mpduSmExtBarOutletEntry 19 } + +mpduSmExtBarOutletPowerWattHour OBJECT-TYPE + SYNTAX INTEGER -- UNITS Watt-Hour (WH) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The Sm Ext Bar's Power measured in Watt-Hour support Billing Grade Energy Metering. + A value of -1 will be returned if the power is unable to be measured." + ::= { mpduSmExtBarOutletEntry 20 } + + + +-- ==================================================================================== +-- OFFLINE UPS +-- ==================================================================================== +-- +-- oups OBJECT IDENTIFIER ::= {cpqPower 6} +-- oupsIdent OBJECT IDENTIFIER ::= { oups 1 } +-- Offline UPS - UPS Identification +-- OID= .1.3.6.1.4.1.232.165.6.1 + +oupsIdentManufacturer OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..31)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The UPS Manufacturer Name (e.g. Hewlett-Packard)." + ::= { oupsIdent 1 } + +oupsIdentModel OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..63)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The UPS Model such as R-1500 G3." + ::= { oupsIdent 2 } + +oupsIdentSystemFWVersion OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..63)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Display System firmware version." + ::= { oupsIdent 3 } + +oupsIdentPowerModuleFWVersion OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..63)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Display Power Module firmware version." + ::= { oupsIdent 4 } + +oupsIdentOemCode OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..63)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A binary code indicating vendor. This should be a ?0x0c? for HP" + ::= { oupsIdent 5 } + +oupsIdentSerialNumber OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..63)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Get the UPS Serial Number (i.e. B00123456W)." + ::= { oupsIdent 6 } + +oupsIdentPartNumber OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..63)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Get the UPS Part Number (i.e. 204451-B21)." + ::= { oupsIdent 7 } + + +-- ==================================================================================== +-- +-- oups OBJECT IDENTIFIER ::= {cpqPower 6} +-- oupsBattery OBJECT IDENTIFIER ::= { oups 2 } +-- Offline UPS - Battery Parameters +-- OID= .1.3.6.1.4.1.232.165.6.2 + +oupsBatTimeRemaining OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) -- UNITS seconds + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Battery run time in seconds before UPS turns off due + to low battery." + ::= { oupsBattery 1 } + +oupsBatVoltage OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) -- UNITS Volts DC + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Read the Total Battery voltage." + ::= { oupsBattery 2 } + +oupsBatCapacity OBJECT-TYPE + SYNTAX INTEGER (0..100) -- UNITS percent + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Battery percent charge." + ::= { oupsBattery 3 } + +oupsBatAbmStatus OBJECT-TYPE + SYNTAX INTEGER { + batteryCharging(1), --(include Battery Boosting and Battery Floating) + batteryDischarging(2), + batteryResting(3), + batteryTesting(4), + notAvailable(5) --(ACC mode, no BP connected) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Gives the status of the Advanced Battery Management; example: + batteryResting(3) is the state when the battery is fully charged and none of + the other actions (charging/discharging/floating) is being done." + ::= { oupsBattery 4 } + +oupsBatTestStatus OBJECT-TYPE + SYNTAX INTEGER { + unknown(1), + passed(2), + failed(3), + inProgress(4), + notSupported(5), + inhibited(6) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Battery Test Status. UPS will support schedule testing only + 7, 14, 30, or 60 days. Default is 14 days." + ::= { oupsBattery 5 } + +oupsBatLatestTestDate OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..63)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Get time and date of the latest battery test." + ::= { oupsBattery 6 } + +oupsBatReplacementDateBP1 OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..63)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Get the battery replacement date of BP1." + ::= { oupsBattery 7 } + +oupsBatReplacementDateBP2 OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..63)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Get the battery replacement date of BP2." + ::= { oupsBattery 8 } + +oupsBatToACDelay OBJECT-TYPE + SYNTAX INTEGER (0..150) -- UNITS ms + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Get delay time switching from Battery mode to AC mode in ms. + Default is 0ms, unit is increased per 100ms" + ::= { oupsBattery 9 } + +oupsBatChargeDelay OBJECT-TYPE + SYNTAX INTEGER (0..9999) -- UNITS seconds + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Get battery charge delay in second. Default is 0 (random) + unit is increased per 10sec." + ::= { oupsBattery 10 } + +oupsBatNumModules OBJECT-TYPE + SYNTAX INTEGER (0..2) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Number of battery modules detected by power unit." + ::= { oupsBattery 11 } + +oupsBatModel OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..63)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Report 1U, 2U, or 3U Battery Pack, both BPs must be the same model." + ::= { oupsBattery 12 } + +oupsBatChargingPowerLevelUtility OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..63)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "3 charging power levels: 1100W, 555W, 190W." + ::= { oupsBattery 13 } + +oupsBatChargingPowerLevelGenerator OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..63)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "4 charging power levels: 1100W, 555W, 190W, No Charge." + ::= { oupsBattery 14 } + +oupsBatSharedConfig OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..63)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "expect 3 values for shared BP configuration: PU single, PU master, PU slave." + ::= { oupsBattery 15 } + +oupsBatPackFWVerBP1 OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..63)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Display Battery Pack 1 FW version." + ::= { oupsBattery 16 } + +oupsBatPackFWVerBP2 OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..63)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Display Battery Pack 2 FW version." + ::= { oupsBattery 17 } + + +-- ==================================================================================== +-- +-- oups OBJECT IDENTIFIER ::= {cpqPower 6} +-- oupsInput OBJECT IDENTIFIER ::= { oups 3 } +-- Offline UPS - Input Parameters +-- OID= .1.3.6.1.4.1.232.165.6.3 + + +oupsInputFrequency OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) -- UNITS 0.1 Hertz + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The utility line frequency in tenths of Hz." + ::= { oupsInput 1 } + +oupsInputLineBads OBJECT-TYPE + SYNTAX INTEGER (0..6) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of times the Input was out of tolerance + in voltage or frequency." + ::= { oupsInput 2 } + +oupsInputNumPhases OBJECT-TYPE + SYNTAX INTEGER (0..6) + ACCESS read-only + STATUS mandatory + ::= { oupsInput 3 } + +oupsInputTable OBJECT-TYPE + SYNTAX SEQUENCE OF OupsInputEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION "Aggregate Object with number of entries equal to + NumPhases and including the UpsInput group." + ::= { oupsInput 4 } + +oupsInputEntry OBJECT-TYPE + SYNTAX OupsInputEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION "The input table entry containing the current, voltage, etc." + INDEX { oupsInputPhase } + ::= { oupsInputTable 1 } + +OupsInputEntry ::= SEQUENCE { + oupsInputPhase INTEGER, + oupsInputVoltage INTEGER, + oupsInputCurrent INTEGER, + oupsInputWatts INTEGER + } + +oupsInputPhase OBJECT-TYPE + SYNTAX INTEGER (0..6) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of the phase. Serves as index for input table." + ::= { oupsInputEntry 1 } + +oupsInputVoltage OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) -- UNITS RMS Volts + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The measured input voltage from the UPS meters in volts." + ::= { oupsInputEntry 2 } + +oupsInputCurrent OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) -- UNITS RMS Amp + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The measured input current from the UPS meters in amps." + ::= { oupsInputEntry 3 } + +oupsInputWatts OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) -- UNITS Watts + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The measured input power in watts." + ::= { oupsInputEntry 4 } + +-- ===== end of table ==== + +oupsInputPowerFactor OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) -- 0.01 UNITS + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The measured real Input power factor with 2 decimals." + ::= { oupsInput 5 } + +oupsInputDBType OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..63)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Read the input Distribution Box type: 1- 480V-Y (US-5W NEMA plugs), + 2- 480V-V (US-5W IEC plugs), 3- 415V-Y (EURO-5W IEC plugs), + 4- 415V-Y (US/INTL-5W IEC plugs), 5- 380V-Y (China-5W hardwired)." + ::= { oupsInput 6 } + +oupsInputUpperVoltage OBJECT-TYPE + SYNTAX INTEGER (0..999) -- UNITS in V + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Read the upper voltage range, 5 to 10 percent above the nominal voltage. + Factory default is 10 percent." + ::= { oupsInput 7 } + +oupsInputLowerVoltage OBJECT-TYPE + SYNTAX INTEGER (0..999) -- UNITS in V + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Read the lower voltage range, 5 to 15 percent below the nominal voltage. + Factory default is -15 percent." + ::= { oupsInput 8 } + +oupsGeneratorDetection OBJECT-TYPE + SYNTAX INTEGER { + onGenerator(1), -- ATS sets 1 to tell generator is switched on + offGenerator(2), -- ATS sets 2 to tell generator is switched off + noAction(3) -- set 3 for no action (default) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "ATS sets a value of 1 to signal UPS that a generator is started so the UPS will + charge Battery Pack using a different setting while it's on generator (intent to + save all power to back up for the load)." + ::= { oupsInput 9 } + +oupsInputWithGenerator OBJECT-TYPE + SYNTAX INTEGER { + woGenerator(1), -- Input Source is on Utility only (know for sure no Gen) + withGenerator(2) -- Input Source could be from Utility or Generator + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A value of 1 when user known for sure Input has no Generator backup; a value + of 2 tells Input Source could be from either Utility or Generator." + ::= { oupsInput 10 } + + +-- ==================================================================================== +-- +-- oups OBJECT IDENTIFIER ::= {cpqPower 6} +-- oupsOutput OBJECT IDENTIFIER ::= { oups 4 } +-- Offline UPS Output Parameters +-- OID= .1.3.6.1.4.1.232.165.6.4 + +oupsOutputLoad OBJECT-TYPE + SYNTAX INTEGER (0..200) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total UPS output load in percentage of rated capacity." + ::= { oupsOutput 1 } + +oupsOutputFrequency OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) -- UNITS 0.1 Hertz + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The measured UPS output frequency in tenths of Hz." + ::= { oupsOutput 2 } + +oupsOutputNumPhases OBJECT-TYPE + SYNTAX INTEGER (0..6) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of metered output phases, serves as the table index." + ::= { oupsOutput 3 } + +oupsOutputTable OBJECT-TYPE + SYNTAX SEQUENCE OF OupsOutputEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "The Aggregate Object with number of entries equal to NumPhases + and including the UpsOutput group." + ::= { oupsOutput 4 } + +oupsOutputEntry OBJECT-TYPE + SYNTAX OupsOutputEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Output Table Entry containing voltage, current, etc." + INDEX { oupsOutputPhase } + ::= { oupsOutputTable 1 } + +OupsOutputEntry ::= SEQUENCE { + oupsOutputPhase INTEGER, + oupsOutputVoltage INTEGER, + oupsOutputCurrent INTEGER, + oupsOutputWatts INTEGER, + oupsOutputLoadPerPhase INTEGER + } + +oupsOutputPhase OBJECT-TYPE + SYNTAX INTEGER (0..6) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number {1..3} of the output phase." + ::= { oupsOutputEntry 1 } + +oupsOutputVoltage OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) -- UNITS RMS Volts + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The measured output voltage from the UPS metering in volts." + ::= { oupsOutputEntry 2 } + +oupsOutputCurrent OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) -- UNITS RMS Amp + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The measured UPS output current in amps." + ::= { oupsOutputEntry 3 } + +oupsOutputWatts OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) -- UNITS Watts + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The measured real output power in watts." + ::= { oupsOutputEntry 4 } + +oupsOutputLoadPerPhase OBJECT-TYPE + SYNTAX INTEGER (0..200) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The UPS output load per phase in percentage of rated capacity." + ::= { oupsOutputEntry 5 } + +-- ===== end of table ==== + +oupsOutputPowerFactor OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) -- 0.01 UNITS + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The measured real output power factor with 2 decimals." + ::= { oupsOutput 5 } + +oupsOutputSource OBJECT-TYPE + SYNTAX INTEGER { + acSource(1), -- Either from Utility or Generator + battery(2) -- Power comes from Battery Source + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicate the source that UPS operating from when providing output." + ::= { oupsOutput 6 } + + +-- ==================================================================================== +-- +-- oups OBJECT IDENTIFIER ::= {cpqPower 6} +-- oupsMonitor OBJECT IDENTIFIER ::= { oups 5 } +-- Offline UPS Control Parameters +-- OID= .1.3.6.1.4.1.232.165.6.5 + +oupsMonitorAmbientTemp OBJECT-TYPE + SYNTAX INTEGER (-100..200) -- UNITS in F + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The reading of the internal PU Ambient temperature." + ::= { oupsMonitor 1 } + +oupsMonitorBypassSCRTemp OBJECT-TYPE + SYNTAX INTEGER (-100..200) -- UNITS in F + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The reading of the internal PU Bypass SCR temperature." + ::= { oupsMonitor 2 } + +oupsMonitorDDTemp OBJECT-TYPE + SYNTAX INTEGER (-100..200) -- UNITS in F + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The reading of the internal PU DD temperature." + ::= { oupsMonitor 3 } + +oupsMonitorInverterTemp OBJECT-TYPE + SYNTAX INTEGER (-100..200) -- UNITS in F + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The reading of the internal PU DD temperature." + ::= { oupsMonitor 4 } + +oupsMonitorChargerTemp OBJECT-TYPE + SYNTAX INTEGER (-100..200) -- UNITS in F + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The reading of the internal PU Charger temperature." + ::= { oupsMonitor 5 } + +oupsMonitorBP1Temp OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..63)) -- UNITS in F + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Display Battery Pack 1 Temeprature in F. If BP1 not connected the PU will + return 255 and displayed as -not connect-" + ::= { oupsMonitor 6 } + +oupsMonitorBP2Temp OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..63)) -- UNITS in F + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Display Battery Pack 2 Temperature in F. If BP2 not connected the PU will + return 255 and displayed as -not connect-" + ::= { oupsMonitor 7 } + +oupsMonitorRestartDelay OBJECT-TYPE + SYNTAX INTEGER (1..150) -- UNITS in ms + ACCESS read-only --the last 2 digit SN is the default ms delay + STATUS mandatory + DESCRIPTION + "The reading of the AC Turn On Delay (Restart Delay). The value can be + changed via front LCD Menu or inserted Module GUI. Default is 0ms, unit is + increased per 100ms." + ::= { oupsMonitor 8 } + +oupsMonitorACCLoadLevel OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..63)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Read the set load level that ACC would be active from 0 to this percentage. + Default is 20 percent. Select 0 to set it as Always On" + ::= { oupsMonitor 9 } + +oupsMonitorOperatingMode OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..63)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Check if UPS is normal op, or on bypass, on inverter or ACC Active, " + ::= { oupsMonitor 10 } + +oupsMonitorOperationType OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..63)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Check if UPS is operating as an UPS or ACC (PU only, no BP)." + ::= { oupsMonitor 11 } + +oupsTestTrap OBJECT-TYPE + SYNTAX INTEGER { startTestTrap (1) } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Setting startTestTrap to 1 will initiate a TrapTest + is sent out from Management Module. All other set values are invalid." + ::= { oupsMonitor 12 } + +oupsOnGenDuration OBJECT-TYPE + SYNTAX INTEGER { + for30Min (1), + for1Hr (2), + for2Hr (3), + for4Hr (4) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "When read, show the current On-Generator Duration set by user on UPS LCD or GUI ." + ::= { oupsMonitor 13 } + +oupsRuntimeLimitation OBJECT-TYPE + SYNTAX INTEGER { + disable (1), + enable (2) + } + + ACCESS read-write + STATUS mandatory + DESCRIPTION + "show the current setting for Runtime Limitation. When enable, it can last for 70sec or 3min." + ::= { oupsMonitor 14 } + + +-- ==================================================================================== +-- +-- oups OBJECT IDENTIFIER ::= {cpqPower 6} +-- oupsRackDiscovery OBJECT IDENTIFIER ::= { ups 6 } +-- Offline UPS Rack Discovery. Location of the PU and BP installed in a rack +-- 1-wire contact reading the U-Height and U-Position of each enclosure +-- OID= .1.3.6.1.4.1.232.165.6.6 + + +oupsRackTagVersion OBJECT-TYPE + SYNTAX INTEGER (0..10) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Get the 1-wire contact FW version from EEPROM's Tag Version. Initial tag is 01" + ::= { oupsRackDiscovery 1 } + +oupsRackID OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..63)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Get 10-digit Serial Number from the Location Discovery Strip mount in the front of the rack" + ::= { oupsRackDiscovery 2 } + +oupsRackPartNumber OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..63)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Get 10 or 12-digit Part Number xxxxxx-001 from the Location Discovery Strip mount in the front of the rack" + ::= { oupsRackDiscovery 3 } + +oupsRackProductDescription OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..63)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Get spatial data of rack: description of the Rack Name." + ::= { oupsRackDiscovery 4 } + +oupsRackEncULocation OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..63)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Tell where the Location Discovery Strip is mounted in the rack. B for Back, F for Front, L for Left + and R for Right." + ::= { oupsRackDiscovery 5 } + +oupsRackUHeight OBJECT-TYPE + SYNTAX INTEGER (0..50) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Get spatial data of rack: U-height of the rack can be 36U, 42U, or 47U model." + ::= { oupsRackDiscovery 6 } + +oupsRackPUUPosition OBJECT-TYPE + SYNTAX INTEGER (0..50) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Get the U-position of the PU where it is installed in the rack. The U position range is from 1-50." + ::= { oupsRackDiscovery 7 } + +oupsRackPUUHeight OBJECT-TYPE + SYNTAX INTEGER (0..10) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Get the U-Height of the Power Unit. PU height is either 1U or 2U." + ::= { oupsRackDiscovery 8 } + +oupsRackBP1UPosition OBJECT-TYPE + SYNTAX INTEGER (0..50) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Get the U-Position of the Battery Pack 1, installed right below the PU. + Range is from 1 to 50." + ::= { oupsRackDiscovery 9 } + +oupsRackBP1UHeight OBJECT-TYPE + SYNTAX INTEGER (0..10) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Get the U-Height of the BP 1. BP is either 1U, 2U, and 3U" + ::= { oupsRackDiscovery 10 } + +oupsRackBP2UPosition OBJECT-TYPE + SYNTAX INTEGER (0..50) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Get the U-Position of the Battery Pack 2, installed right below the BP1. + Range is from 1 to 50." + ::= { oupsRackDiscovery 11 } + +oupsRackBP2UHeight OBJECT-TYPE + SYNTAX INTEGER (0..10) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Get the U-Height of the BP 2. BP is either 1U, 2U, and 3U" + ::= { oupsRackDiscovery 12 } + + +-- ==================================================================================== +-- PDU2 GLANDORE - Group (breaker) monitored (no outlet monitored) +-- PDU2 DRAGONWOOD1 (GLANDORE2) - Group (breaker) and Outlet monitored +-- ==================================================================================== +-- +-- pdu2 OBJECT IDENTIFIER ::= {cpqPower 7} +-- pdu2Ident OBJECT IDENTIFIER ::= { pdu2 1 } +-- PDU identification group +-- OID= .1.3.6.1.4.1.232.165.7.1 + +pdu2NumberPDU OBJECT-TYPE + SYNTAX INTEGER (1..2) -- pdu(0) master or pdu(1) slave1... + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of PDUs detected (in its daisy chain)." + ::= { pdu2Ident 1 } + +pdu2IdentTable OBJECT-TYPE + SYNTAX SEQUENCE OF Pdu2IdentEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION "Aggregate Object with number of entries equal to pdu2NumberPDU ." + ::= { pdu2Ident 2 } + +pdu2IdentEntry OBJECT-TYPE + SYNTAX Pdu2IdentEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION "The ident table entry containing the name, model, manufacturer, + firmware version, part number, etc." + INDEX { pdu2IdentIndex } + ::= { pdu2IdentTable 1 } + +Pdu2IdentEntry ::= SEQUENCE { + pdu2IdentIndex INTEGER, + pdu2Name DisplayString, + pdu2Model DisplayString, + pdu2Manufacturer DisplayString, + pdu2FirmwareVersion DisplayString, + pdu2PartNumber DisplayString, + pdu2SerialNumber DisplayString, + pdu2Status INTEGER, + pdu2Controllable INTEGER, + pdu2InputPhaseCount INTEGER, + pdu2GroupCount INTEGER, + pdu2OutletCount INTEGER + } + +pdu2IdentIndex OBJECT-TYPE + SYNTAX INTEGER (0..100) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Index for the Pdu2IdentEntry table." + ::= { pdu2IdentEntry 1 } + +pdu2Name OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..63)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The string identify the device in daisy chain. Example PDU A." + ::= { pdu2IdentEntry 2 } + +pdu2Model OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..63)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The Device Model." + ::= { pdu2IdentEntry 3 } + +pdu2Manufacturer OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..63)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The Device Manufacturer Name (e.g. Hewlett-Packard)." + ::= { pdu2IdentEntry 4 } + +pdu2FirmwareVersion OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..63)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The firmware revision level of the device." + ::= { pdu2IdentEntry 5 } + +pdu2PartNumber OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..63)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The device part number. Example AF400A." + ::= { pdu2IdentEntry 6 } + +pdu2SerialNumber OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..63)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The device serial number, 10- or 16-digit." + ::= { pdu2IdentEntry 7 } + +pdu2Status OBJECT-TYPE + SYNTAX INTEGER + { + other(1), -- default + ok(2), + degraded(3), + failed(4) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The overall status of the device. A value of OK(2) indicates the device is operating normally. + A value of degraded(3) indicates the device is operating with warning indicators. A value of + failed(4) indicates the device is operating with critical indicators." + ::= { pdu2IdentEntry 8 } + +pdu2Controllable OBJECT-TYPE + SYNTAX INTEGER + { + yes(1), + no(2) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "This object indicates whether or not the device is controllable." + ::= { pdu2IdentEntry 9 } + +pdu2InputPhaseCount OBJECT-TYPE + SYNTAX INTEGER (0..63) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of input phase on this pdu 1,2,3." + ::= { pdu2IdentEntry 10 } + +pdu2GroupCount OBJECT-TYPE + SYNTAX INTEGER (0..63) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of groups (breakers) on this pdu." + ::= { pdu2IdentEntry 11 } + +pdu2OutletCount OBJECT-TYPE + SYNTAX INTEGER (0..63) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of outlets in this PDU." + ::= { pdu2IdentEntry 12 } + + +-- ==================================================================================== +-- +-- pdu2 OBJECT IDENTIFIER ::= {cpqPower 7} +-- pdu2Input OBJECT IDENTIFIER ::= { pdu2 2 } +-- PDU2 input group +-- OID= .1.3.6.1.4.1.232.165.7.2 + +pdu2InputTable OBJECT-TYPE + SYNTAX SEQUENCE OF Pdu2InputEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Aggregate Object with number of entries equal to pdu2NumberPDU ." + ::= { pdu2Input 1 } + +pdu2InputEntry OBJECT-TYPE + SYNTAX Pdu2InputEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "The ident table entry containing the VA, Watts, WH, etc." + INDEX { pdu2IdentIndex } + ::= { pdu2InputTable 1 } + +Pdu2InputEntry ::= SEQUENCE { + pdu2InputType INTEGER, + pdu2InputFrequency INTEGER, + pdu2InputFrequencyStatus INTEGER, + pdu2InputPowerVA INTEGER, + pdu2InputPowerWatts INTEGER, + pdu2InputPowerWattHour INTEGER, + pdu2InputPowerWattHourTimer DisplayString, + pdu2InputPowerFactor INTEGER, + pdu2InputPowerVAR INTEGER +} + +pdu2InputType OBJECT-TYPE + SYNTAX INTEGER { + singlePhase (1), + splitPhase (2), + threePhaseDelta (3), + threePhaseWye (4) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Type of input - single phase, split phase, three phase delta, or three + phase wye." + ::= { pdu2InputEntry 1 } + +pdu2InputFrequency OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) -- UNITS RMS 0.1 Hz + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The measured input frequency from the PDU meters in tenths of Hz." + ::= { pdu2InputEntry 2 } + +pdu2InputFrequencyStatus OBJECT-TYPE + SYNTAX INTEGER { + good (1), + outOfRange (2) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Status of the measured input frequency relative to the nominal frequency and the admitted tolerance." + ::= { pdu2InputEntry 3 } + +pdu2InputPowerVA OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A total input VA of all phases. Units are VA. A negative value indicates + that this object is not available." + ::= { pdu2InputEntry 4 } + +pdu2InputPowerWatts OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A total input Watts of all phases. Units are Watts. A negative value indicates + that this object is not available." + ::= { pdu2InputEntry 5 } + +pdu2InputPowerWattHour OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A total input Watt-Hour value for all phases. Units are WH. This value can be reset to 0 + using GUI. In that case, the pdu2InputPowerWattHourTimer will be reset as well + A negative value indicates that this object is not available." + ::= { pdu2InputEntry 6 } + +pdu2InputPowerWattHourTimer OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..22)) -- display Date Time + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A Timestamp of when the Total Input WH was last reset." + ::= { pdu2InputEntry 7 } + +pdu2InputPowerFactor OBJECT-TYPE + SYNTAX INTEGER -- units 0.01 + ACCESS read-only + STATUS mandatory + DESCRIPTION + "An input PF value. Units are in thousandths, for example a power factor + of 0.958 would be returned as 958, and 0.92 would be returned as 920. + A negative value indicates that this object is not available." + ::= { pdu2InputEntry 8 } + +pdu2InputPowerVAR OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "An input VAR value. Units are VAR. A negative value indicates + that this object is not available." + ::= { pdu2InputEntry 9 } + + +pdu2InputPhaseTable OBJECT-TYPE + SYNTAX SEQUENCE OF Pdu2InputPhaseEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Aggregate Object with number of entries equal to number of PDUs (pdu2NumberPDU) and + number of input phase (pdu2InputPhaseCount)." + ::= {pdu2Input 2} + +pdu2InputPhaseEntry OBJECT-TYPE + SYNTAX Pdu2InputPhaseEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "The input table entry containing the voltage, current, frequency, power for each phase. + Entries are given with number of pdu and number of input phase 1, 2, or 3." + INDEX { pdu2IdentIndex, pdu2InputPhaseIndex } + ::= { pdu2InputPhaseTable 1 } + +Pdu2InputPhaseEntry ::= SEQUENCE { + pdu2InputPhaseIndex INTEGER, + pdu2InputPhaseVoltageMeasType INTEGER, + pdu2InputPhaseVoltage INTEGER, + pdu2InputPhaseVoltageThStatus INTEGER, + pdu2InputPhaseVoltageThLowerWarning INTEGER, + pdu2InputPhaseVoltageThLowerCritical INTEGER, + pdu2InputPhaseVoltageThUpperWarning INTEGER, + pdu2InputPhaseVoltageThUpperCritical INTEGER, + pdu2InputPhaseCurrentMeasType INTEGER, + pdu2InputPhaseCurrentRating INTEGER, + pdu2InputPhaseCurrent INTEGER, + pdu2InputPhaseCurrentThStatus INTEGER, + pdu2InputPhaseCurrentThLowerWarning INTEGER, + pdu2InputPhaseCurrentThLowerCritical INTEGER, + pdu2InputPhaseCurrentThUpperWarning INTEGER, + pdu2InputPhaseCurrentThUpperCritical INTEGER, + pdu2InputPhaseCurrentCrestFactor INTEGER, + pdu2InputPhaseCurrentPercentLoad INTEGER, + pdu2InputPhasePowerMeasType INTEGER, + pdu2InputPhasePowerVA INTEGER, + pdu2InputPhasePowerWatts INTEGER, + pdu2InputPhasePowerWattHour INTEGER, + pdu2InputPhasePowerWattHourTimer DisplayString, + pdu2InputPhasePowerFactor INTEGER, + pdu2InputPhasePowerVAR INTEGER + } + +pdu2InputPhaseIndex OBJECT-TYPE + SYNTAX INTEGER (0..100) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Index for the Pdu2InputEntry table." + ::= { pdu2InputPhaseEntry 1} + +pdu2InputPhaseVoltageMeasType OBJECT-TYPE + SYNTAX INTEGER { + singlePhase (1), + phase1toN (2), + phase2toN (3), + phase3toN (4), + phase1to2 (5), + phase2to3 (6), + phase3to1 (7) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Value indicates what input voltage is being measured in this table row - single phase + voltage, phase 1 to neutral, phase 2 to neutral, phase 3 to neutral, phase 1 to phase 2, + phase 2 to phase 3, or phase 3 to phase 1." + ::= { pdu2InputPhaseEntry 2 } + +pdu2InputPhaseVoltage OBJECT-TYPE + SYNTAX INTEGER -- UNITS RMS 0.001 Volts + ACCESS read-only + STATUS mandatory + DESCRIPTION + "An input voltage measurement value. Units are millivolts." + ::= {pdu2InputPhaseEntry 3} + +pdu2InputPhaseVoltageThStatus OBJECT-TYPE + SYNTAX INTEGER { + good (1), + lowWarning (2), + lowCritical (3), + highWarning (4), + highCritical (5) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Status of the measured input voltage relative to the configured thresholds." + ::= { pdu2InputPhaseEntry 4 } + +pdu2InputPhaseVoltageThLowerWarning OBJECT-TYPE + SYNTAX INTEGER (-1..500000) -- Units in 0.001 V + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Lower warning threshold. Units are millivolts. A negative value indicates + that this object is not available." + ::= { pdu2InputPhaseEntry 5 } + +pdu2InputPhaseVoltageThLowerCritical OBJECT-TYPE + SYNTAX INTEGER (-1..500000) -- Units in 0.001 V + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Lower critical threshold. Units are millivolts. A negative value indicates + that this object is not available." + ::= { pdu2InputPhaseEntry 6 } + +pdu2InputPhaseVoltageThUpperWarning OBJECT-TYPE + SYNTAX INTEGER (-1..500000) -- Units in 0.001 V + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Upper warning threshold. Units are millivolts. A negative value indicates + that this object is not available." + ::= { pdu2InputPhaseEntry 7 } + +pdu2InputPhaseVoltageThUpperCritical OBJECT-TYPE + SYNTAX INTEGER (-1..500000) -- Units in 0.001 V + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Upper critical threshold. Units are millivolts. A negative value indicates + that this object is not available." + ::= { pdu2InputPhaseEntry 8 } + +pdu2InputPhaseCurrentMeasType OBJECT-TYPE + SYNTAX INTEGER { + singlePhase (1), + neutral (2), + phase1 (3), + phase2 (4), + phase3 (5) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Which input wire is being measured in this table row - single phase, neutral, phase 1, + phase 2, or phase 3." + ::= { pdu2InputPhaseEntry 9 } + +pdu2InputPhaseCurrentRating OBJECT-TYPE + SYNTAX INTEGER -- Units in 0.001 A + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Rated current capacity of the input. A negative value indicates that + the hardware current capacity is unknown. Units are milliamps." + ::= { pdu2InputPhaseEntry 10 } + +pdu2InputPhaseCurrent OBJECT-TYPE + SYNTAX INTEGER -- Units in 0.001 A + ACCESS read-only + STATUS mandatory + DESCRIPTION + "An input current measurement value. Units are milliamps." + ::= { pdu2InputPhaseEntry 11 } + +pdu2InputPhaseCurrentThStatus OBJECT-TYPE + SYNTAX INTEGER { + good (1), + lowWarning (2), + lowCritical (3), + highWarning (4), + highCritical (5) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Status of the measured input current relative to the configured thresholds." + ::= { pdu2InputPhaseEntry 12 } + +pdu2InputPhaseCurrentThLowerWarning OBJECT-TYPE + SYNTAX INTEGER (-1..100000) -- Units in 0.001 A + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Lower warning threshold. Units are milliamps. A negative value indicates + that this object is not available." + ::= { pdu2InputPhaseEntry 13 } + +pdu2InputPhaseCurrentThLowerCritical OBJECT-TYPE + SYNTAX INTEGER (-1..100000) -- Units in 0.001 A + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Lower critical threshold. Units are milliamps. A negative value indicates + that this object is not available." + ::= { pdu2InputPhaseEntry 14 } + +pdu2InputPhaseCurrentThUpperWarning OBJECT-TYPE + SYNTAX INTEGER (-1..100000) -- Units in 0.001 A + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Upper warning threshold. Units are milliamps. A negative value indicates + that this object is not available." + ::= { pdu2InputPhaseEntry 15 } + +pdu2InputPhaseCurrentThUpperCritical OBJECT-TYPE + SYNTAX INTEGER (-1..100000) -- Units in 0.001 A + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Upper critical threshold. Units are milliamps. A negative value indicates + that this object is not available." + ::= { pdu2InputPhaseEntry 16 } + +pdu2InputPhaseCurrentCrestFactor OBJECT-TYPE + SYNTAX INTEGER -- Units in 0.001 + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Current crest factor. Units are in milli, for example a crest factor of + 1.414 will be returned as 1414. A negative value indicates + that this object is not available." + ::= { pdu2InputPhaseEntry 17 } + +pdu2InputPhaseCurrentPercentLoad OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Current percent load, based on the rated current capacity. Units are + percentage, for example 80% will be returned as 80. A negative + value indicates that this object is not available." + ::= { pdu2InputPhaseEntry 18 } + +pdu2InputPhasePowerMeasType OBJECT-TYPE + SYNTAX INTEGER { + singlePhase (1), + neutral (2), + phase1 (3), + phase2 (4), + phase3 (5) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Which input wire is being measured in this table row - single phase, neutral, phase 1, + phase 2, or phase 3." + ::= { pdu2InputPhaseEntry 19 } + +pdu2InputPhasePowerVA OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "An input VA value. Units are VA. A negative value indicates + that this object is not available." + ::= { pdu2InputPhaseEntry 20 } + +pdu2InputPhasePowerWatts OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "An input Watts value. Units are Watts. A negative value indicates + that this object is not available." + ::= { pdu2InputPhaseEntry 21 } + +pdu2InputPhasePowerWattHour OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A Watt-Hour value for each Input phase. Units are WH. This value can be reset to 0 + using GUI. In that case, the pdu2InputPhasePowerWattHourTimer will be reset as well + A negative value indicates that this object is not available." + ::= { pdu2InputPhaseEntry 22 } + +pdu2InputPhasePowerWattHourTimer OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..22)) -- display Date Time + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Timestamp of when input Watt-hours (inputWh) was last reset." + ::= { pdu2InputPhaseEntry 23 } + +pdu2InputPhasePowerFactor OBJECT-TYPE + SYNTAX INTEGER -- units 0.001 + ACCESS read-only + STATUS mandatory + DESCRIPTION + "An input PF value. Units are in thousandths, for example a power factor + of 0.958 would be returned as 958, and 0.92 would be returned + as 920. A negative value indicates that this object is not available." + ::= { pdu2InputPhaseEntry 24 } + +pdu2InputPhasePowerVAR OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "An input VAR value. Units are VAR. A negative value indicates + that this object is not available." + ::= { pdu2InputPhaseEntry 25 } + + + +-- ==================================================================================== +-- +-- pdu2 OBJECT IDENTIFIER ::= {cpqPower 7} +-- pdu2Group OBJECT IDENTIFIER ::= { pdu2 3 } +-- PDU2 Output groups of outlets +-- OID= .1.3.6.1.4.1.232.165.7.3 + + +pdu2GroupTable OBJECT-TYPE + SYNTAX SEQUENCE OF Pdu2GroupEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION "Aggregate Object with number of entries equal to number of PDUs + and number of breakers (pdu2GroupCount)." + ::= { pdu2Group 1 } + +pdu2GroupEntry OBJECT-TYPE + SYNTAX Pdu2GroupEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "The input table entry containing the name, voltages, currents, power, etc." + INDEX { pdu2IdentIndex, pdu2GroupIndex } + ::= { pdu2GroupTable 1 } + +Pdu2GroupEntry ::= SEQUENCE { + pdu2GroupIndex INTEGER, + pdu2GroupName DisplayString, + pdu2GroupType INTEGER, + pdu2GroupVoltageMeasType INTEGER, + pdu2GroupVoltage INTEGER, + pdu2GroupVoltageThStatus INTEGER, + pdu2GroupVoltageThLowerWarning INTEGER, + pdu2GroupVoltageThLowerCritical INTEGER, + pdu2GroupVoltageThUpperWarning INTEGER, + pdu2GroupVoltageThUpperCritical INTEGER, + pdu2groupCurrentRating INTEGER, + pdu2GroupCurrent INTEGER, + pdu2GroupCurrentThStatus INTEGER, + pdu2GroupCurrentThLowerWarning INTEGER, + pdu2GroupCurrentThLowerCritical INTEGER, + pdu2GroupCurrentThUpperWarning INTEGER, + pdu2GroupCurrentThUpperCritical INTEGER, + pdu2GroupCurrentCrestFactor INTEGER, + pdu2GroupCurrentPercentLoad INTEGER, + pdu2GroupPowerVA INTEGER, + pdu2GroupPowerWatts INTEGER, + pdu2GroupPowerWattHour INTEGER, + pdu2GroupPowerWattHourTimer DisplayString, + pdu2GroupPowerFactor INTEGER, + pdu2GroupPowerVAR INTEGER, + pdu2GroupOutletCount INTEGER, + pdu2GroupBreakerStatus INTEGER + } + +pdu2GroupIndex OBJECT-TYPE + SYNTAX INTEGER (0..100) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Index for the Pdu2GroupEntry table." + ::= { pdu2GroupEntry 1 } + +pdu2GroupName OBJECT-TYPE + SYNTAX DisplayString (SIZE(1..31)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A descriptive name for the group." + ::= { pdu2GroupEntry 2 } + +pdu2GroupType OBJECT-TYPE + SYNTAX INTEGER { + breaker1pole (2), + breaker2pole (3), + breaker3pole (4), + outletSection (5) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The type of the group. (5) has no breaker" + ::= { pdu2GroupEntry 3 } + +pdu2GroupVoltageMeasType OBJECT-TYPE + SYNTAX INTEGER { + singlePhase (1), + phase1toN (2), + phase2toN (3), + phase3toN (4), + phase1to2 (5), + phase2to3 (6), + phase3to1 (7) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Value indicates what input voltage is being measured in this table row - single phase + voltage, phase 1 to neutral, phase 2 to neutral, phase 3 to neutral, phase 1 to phase 2, + phase 2 to phase 3, or phase 3 to phase 1." + ::= { pdu2GroupEntry 4 } + +pdu2GroupVoltage OBJECT-TYPE + SYNTAX INTEGER -- Units 0.001 V + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Units are millivolts." + ::= { pdu2GroupEntry 5 } + +pdu2GroupVoltageThStatus OBJECT-TYPE + SYNTAX INTEGER { + good (1), + lowWarning (2), + lowCritical (3), + highWarning (4), + highCritical (5) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Status of the measured group voltage relative to the configured thresholds." + ::= { pdu2GroupEntry 6 } + +pdu2GroupVoltageThLowerWarning OBJECT-TYPE + SYNTAX INTEGER (-1..500000) -- Units 0.001 V + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Lower warning threshold. Units are millivolts. A negative value indicates + that this object is not available." + ::= { pdu2GroupEntry 7 } + +pdu2GroupVoltageThLowerCritical OBJECT-TYPE + SYNTAX INTEGER (-1..500000) -- Units 0.001 V + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Lower critical threshold. Units are millivolts. A negative value indicates + that this object is not available." + ::= { pdu2GroupEntry 8 } + +pdu2GroupVoltageThUpperWarning OBJECT-TYPE + SYNTAX INTEGER (-1..500000) -- Units 0.001 V + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Upper warning threshold. Units are millivolts. A negative value indicates + that this object is not available." + ::= { pdu2GroupEntry 9 } + +pdu2GroupVoltageThUpperCritical OBJECT-TYPE + SYNTAX INTEGER (-1..500000) -- Units 0.001 V + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Upper critical threshold. Units are millivolts. A negative value indicates + that this object is not available." + ::= { pdu2GroupEntry 10 } + +pdu2groupCurrentRating OBJECT-TYPE + SYNTAX INTEGER -- Units 0.001 A + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Rated current capacity of the group. Units are milliamps. A negative + value indicates that the hardware current capacity is unknown (it + will always be unknown for custom groups)." + ::= { pdu2GroupEntry 11 } + +pdu2GroupCurrent OBJECT-TYPE + SYNTAX INTEGER -- Units 0.001 A + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A group current measurement value. Units are milliamps." + ::= { pdu2GroupEntry 12 } + +pdu2GroupCurrentThStatus OBJECT-TYPE + SYNTAX INTEGER { + good (1), + lowWarning (2), + lowCritical (3), + highWarning (4), + highCritical (5) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Status of the measured group current relative to the configured thresholds." + ::= { pdu2GroupEntry 13 } + +pdu2GroupCurrentThLowerWarning OBJECT-TYPE + SYNTAX INTEGER (-1..100000) -- Units 0.001 A + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Lower warning threshold. Units are milliamps. A negative value indicates + that this object is not available." + ::= { pdu2GroupEntry 14 } + +pdu2GroupCurrentThLowerCritical OBJECT-TYPE + SYNTAX INTEGER (-1..100000) -- Units 0.001 A + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Lower critical threshold. Units are milliamps. A negative value indicates + that this object is not available." + ::= { pdu2GroupEntry 15 } + +pdu2GroupCurrentThUpperWarning OBJECT-TYPE + SYNTAX INTEGER (-1..100000) -- Units 0.001 A + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Upper warning threshold. Units are milliamps. A negative value indicates + that this object is not available." + ::= { pdu2GroupEntry 16 } + +pdu2GroupCurrentThUpperCritical OBJECT-TYPE + SYNTAX INTEGER (-1..100000) -- Units 0.001 A + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Upper critical threshold. Units are milliamps. A negative value indicates + that this object is not available." + ::= { pdu2GroupEntry 17 } + +pdu2GroupCurrentCrestFactor OBJECT-TYPE + SYNTAX INTEGER -- units 0.001 + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Current crest factor. Units are in milli, for example a crest factor of + 1.414 will be returned as 1414. A negative value indicates + that this object is not available." + ::= { pdu2GroupEntry 18 } + +pdu2GroupCurrentPercentLoad OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Current percent load, based on the rated current capacity. Units are + percentage, for example 80% will be returned as 80. A negative + value indicates that this object is not available." + ::= { pdu2GroupEntry 19 } + +pdu2GroupPowerVA OBJECT-TYPE + SYNTAX INTEGER -- units in VA + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A group VA value. Units are VA. A negative value indicates + that this object is not available." + ::= { pdu2GroupEntry 20 } + +pdu2GroupPowerWatts OBJECT-TYPE + SYNTAX INTEGER -- units in Watt + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A group Watts value. Units are Watts. A negative value indicates + that this object is not available." + ::= { pdu2GroupEntry 21 } + +pdu2GroupPowerWattHour OBJECT-TYPE + SYNTAX INTEGER -- Units in Watt-Hour + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A Watt-Hour value for each section. Units are WH. This value can be reset to 0 + using GUI. In that case, the pdu2GroupPowerWattHourTimer will be reset as well. + A negative value indicates that this object is not available." + ::= { pdu2GroupEntry 22 } + +pdu2GroupPowerWattHourTimer OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..22)) -- display Date and Time + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Timestamp of when group Watt-hours (groupWh) was last reset." + ::= { pdu2GroupEntry 23 } + +pdu2GroupPowerFactor OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A group PF value. Units are in thousandths, for example a power factor + of 0.958 would be returned as 958, and 0.92 would be returned as 920. + A negative value indicates that this object is not available." + ::= { pdu2GroupEntry 24 } + +pdu2GroupPowerVAR OBJECT-TYPE + SYNTAX INTEGER -- Units in VAR + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A group VAR value. Units are VAR. A negative value indicates + that this object is not available." + ::= { pdu2GroupEntry 25 } + +pdu2GroupOutletCount OBJECT-TYPE + SYNTAX INTEGER (0..63) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of outlets in each group (breaker)." + ::= { pdu2GroupEntry 26 } + +pdu2GroupBreakerStatus OBJECT-TYPE + SYNTAX INTEGER { + notApplicable (1), + breakerOn (2), + breakerOff (3) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Only applicable to groups with breaker. Indicates whether a breaker is turned + off or on." + ::= { pdu2GroupEntry 27 } + +-- ==================================================================================== +-- +-- pdu2 OBJECT IDENTIFIER ::= {cpqPower 7} +-- pdu2Environment OBJECT IDENTIFIER ::= { pdu2 4 } +-- PDU2 Environment group +-- OID= .1.3.6.1.4.1.232.165.7.4 + +pdu2EnvProbeTable OBJECT-TYPE + SYNTAX SEQUENCE OF Pdu2EnvProbeEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A list of environment probe (1 per PDU) for temperature, humidity, and contacts. + The number of entries is given by number of PDUs in daisy chain." + ::= { pdu2Environment 1 } + +pdu2EnvProbeEntry OBJECT-TYPE + SYNTAX Pdu2EnvProbeEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Aggregate entries equal to number of PDUs." + INDEX { pdu2IdentIndex } + ::= { pdu2EnvProbeTable 1 } + +Pdu2EnvProbeEntry ::= SEQUENCE { + pdu2TemperatureScale INTEGER, + pdu2TemperatureCount INTEGER, + pdu2HumidityCount INTEGER, + pdu2ContactCount INTEGER +} + +pdu2TemperatureScale OBJECT-TYPE + SYNTAX INTEGER { + celsius (1), + fahrenheit (2) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Scale used to return temperature objects." + ::= { pdu2EnvProbeEntry 1 } + +pdu2TemperatureCount OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Max number of temperature measurements (1 per probe)." + ::= { pdu2EnvProbeEntry 2 } + +pdu2HumidityCount OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Max number of humidity measurements (1 per probe)." + ::= { pdu2EnvProbeEntry 3 } + +pdu2ContactCount OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Max number of contact sensors (1 per probe)." + ::= { pdu2EnvProbeEntry 4 } + +-- ========Temperature Measurements ============ + +pdu2TemperatureTable OBJECT-TYPE + SYNTAX SEQUENCE OF Pdu2TemperatureEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A list of temperature probe measurements. The number of entries are + given by number of pdu and pdu2TemperatureCount." + ::= { pdu2Environment 2 } + +pdu2TemperatureEntry OBJECT-TYPE + SYNTAX Pdu2TemperatureEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "An entry for a temperature measurement." + INDEX { pdu2IdentIndex, pdu2TemperatureIndex } + ::= { pdu2TemperatureTable 1 } + +Pdu2TemperatureEntry ::= SEQUENCE { + pdu2TemperatureIndex INTEGER, + pdu2TemperatureName DisplayString, + pdu2TemperatureProbeStatus INTEGER, + pdu2TemperatureValue INTEGER, + pdu2TemperatureThStatus INTEGER, + pdu2TemperatureThLowerWarning INTEGER, + pdu2TemperatureThLowerCritical INTEGER, + pdu2TemperatureThUpperWarning INTEGER, + pdu2TemperatureThUpperCritical INTEGER +} + +pdu2TemperatureIndex OBJECT-TYPE + SYNTAX INTEGER (1..2) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A unique value for each temperature probe measurement. Its value + ranges from 1 to temperatureCount." + ::= { pdu2TemperatureEntry 1 } + +pdu2TemperatureName OBJECT-TYPE + SYNTAX DisplayString (SIZE(1..31)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A descriptive name for the temperature probe." + ::= { pdu2TemperatureEntry 2 } + +pdu2TemperatureProbeStatus OBJECT-TYPE + SYNTAX INTEGER { + disconnected (1), + connected (2), + bad (3) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates whether a probe is connected or not." + ::= { pdu2TemperatureEntry 3 } + +pdu2TemperatureValue OBJECT-TYPE + SYNTAX INTEGER --0.1 Fahrenheit or Celsius + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Units are in tenths of a degree (either Fahrenheit or Celsius). + Divide by ten to get degrees." + ::= { pdu2TemperatureEntry 4 } + +pdu2TemperatureThStatus OBJECT-TYPE + SYNTAX INTEGER { + good (1), + lowWarning (2), + lowCritical (3), + highWarning (4), + highCritical (5) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Status of the measured temperature relative to the configured thresholds." + ::= { pdu2TemperatureEntry 5 } + +pdu2TemperatureThLowerWarning OBJECT-TYPE + SYNTAX INTEGER (-1..150000) -- 0.1 of a degree + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Lower warning threshold. Units are tenths of a degree. A negative value + indicates that this object is not available." + ::= { pdu2TemperatureEntry 6 } + +pdu2TemperatureThLowerCritical OBJECT-TYPE + SYNTAX INTEGER (-1..150000) -- 0.1 of a degree + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Lower critical threshold. Units are tenths of a degree. A negative value + indicates that this object is not available." + ::= { pdu2TemperatureEntry 7 } + +pdu2TemperatureThUpperWarning OBJECT-TYPE + SYNTAX INTEGER (-1..150000) -- 0.1 of a degree + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Upper warning threshold. Units are tenths of a degree. A negative value + indicates that this object is not available." + ::= { pdu2TemperatureEntry 8 } + +pdu2TemperatureThUpperCritical OBJECT-TYPE + SYNTAX INTEGER (-1..150000) -- 0.1 of a degree + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Upper critical threshold. Units are tenths of a degree. A negative value + indicates that this object is not available." + ::= { pdu2TemperatureEntry 9 } + +-- ==========Humidity Measurements ========== + +pdu2HumidityTable OBJECT-TYPE + SYNTAX SEQUENCE OF Pdu2HumidityEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A list of humidity probe measurements. The number of entries are + given by number of pdu and pdu2HumidityCount." + ::= { pdu2Environment 3 } + +pdu2HumidityEntry OBJECT-TYPE + SYNTAX Pdu2HumidityEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "An entry for a humidity measurement." + INDEX { pdu2IdentIndex, pdu2HumidityIndex } + ::= { pdu2HumidityTable 1 } + +Pdu2HumidityEntry ::= SEQUENCE { + pdu2HumidityIndex INTEGER, + pdu2HumidityName DisplayString, + pdu2HumidityProbeStatus INTEGER, + pdu2HumidityValue INTEGER, + pdu2HumidityThStatus INTEGER, + pdu2HumidityThLowerWarning INTEGER, + pdu2HumidityThLowerCritical INTEGER, + pdu2HumidityThUpperWarning INTEGER, + pdu2HumidityThUpperCritical INTEGER +} + +pdu2HumidityIndex OBJECT-TYPE + SYNTAX INTEGER (1..2) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A unique value for each humidity probe measurement. Its value + ranges from 1 to pdu2HumidityCount per pdu." + ::= { pdu2HumidityEntry 1 } + +pdu2HumidityName OBJECT-TYPE + SYNTAX DisplayString (SIZE(1..31)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A descriptive name for the humidity probe." + ::= { pdu2HumidityEntry 2 } + +pdu2HumidityProbeStatus OBJECT-TYPE + SYNTAX INTEGER { + disconnected (1), + connected (2), + bad (3) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates whether a probe is connected or not." + ::= { pdu2HumidityEntry 3 } + +pdu2HumidityValue OBJECT-TYPE + SYNTAX INTEGER -- 0.1 of %RH + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Units are tenths of a percent relative humidity. Divide the value by 10 to get %RH." + ::= { pdu2HumidityEntry 4 } + +pdu2HumidityThStatus OBJECT-TYPE + SYNTAX INTEGER { + good (1), + lowWarning (2), + lowCritical (3), + highWarning (4), + highCritical (5) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Status of the measured humidity relative to the configured thresholds." + ::= { pdu2HumidityEntry 5 } + +pdu2HumidityThLowerWarning OBJECT-TYPE + SYNTAX INTEGER (-1..1000) -- 0.1 of %RH + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Lower warning threshold. Units are 0.1 %RH. A negative value + indicates that this object is not available." + ::= { pdu2HumidityEntry 6 } + +pdu2HumidityThLowerCritical OBJECT-TYPE + SYNTAX INTEGER (-1..1000) -- 0.1 of %RH + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Lower critical threshold. Units are 0.1 %RH. A negative value + indicates that this object is not available." + ::= { pdu2HumidityEntry 7 } + +pdu2HumidityThUpperWarning OBJECT-TYPE + SYNTAX INTEGER (-1..1000) -- 0.1 of %RH + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Upper warning threshold. Units are 0.1 %RH. A negative value + indicates that this object is not available." + ::= { pdu2HumidityEntry 8 } + +pdu2HumidityThUpperCritical OBJECT-TYPE + SYNTAX INTEGER (-1..1000) -- 0.1 of %RH + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Upper critical threshold. Units are 0.1 %RH. A negative value + indicates that this object is not available." + ::= { pdu2HumidityEntry 9 } + +-- ======Dry Contacts Status========== + +pdu2ContactTable OBJECT-TYPE + SYNTAX SEQUENCE OF Pdu2ContactEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A list of contact sensors. The number of entries are + given by number of pdu and pdu2ContactCount." + ::= { pdu2Environment 4 } + +pdu2ContactEntry OBJECT-TYPE + SYNTAX Pdu2ContactEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "An entry for a contact sensor" + INDEX { pdu2IdentIndex, pdu2ContactIndex } + ::= { pdu2ContactTable 1 } + +Pdu2ContactEntry ::= SEQUENCE { + pdu2ContactIndex INTEGER, + pdu2ContactName DisplayString, + pdu2ContactProbeStatus INTEGER, + pdu2ContactState INTEGER +} + +pdu2ContactIndex OBJECT-TYPE + SYNTAX INTEGER (1..3) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A unique value for each contact sensor. Its value ranges from 1 to + contactCount." + ::= { pdu2ContactEntry 1 } + +pdu2ContactName OBJECT-TYPE + SYNTAX DisplayString (SIZE(1..31)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A descriptive name for the contact sensor." + ::= { pdu2ContactEntry 2 } + +pdu2ContactProbeStatus OBJECT-TYPE + SYNTAX INTEGER { + disconnected (1), + connected (2), + bad (3) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates whether a probe is connected or not. + Will not be returned if the contact sensor is internal to the ePDU, + in that case only contactState should be read." + ::= { pdu2ContactEntry 3 } + +pdu2ContactState OBJECT-TYPE + SYNTAX INTEGER { + contactOpen (1), + contactClosed (2), + contactBad (3) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The state of the contact sensor." + ::= { pdu2ContactEntry 4 } + + +-- ==================================================================================== +-- +-- pdu2 OBJECT IDENTIFIER ::= {cpqPower 7} +-- pdu2Outlet OBJECT IDENTIFIER ::= { pdu2 5 } +-- PDU2 Outlet group +-- OID= .1.3.6.1.4.1.232.165.7.5 + +pdu2OutletTable OBJECT-TYPE + SYNTAX SEQUENCE OF Pdu2OutletEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Aggregate Object with number of entries equal to Number of PDU (pdu2IdentIndex) + and Number of outlet per PDU (pdu2OutletIndex)." + ::= { pdu2Outlet 1 } + +pdu2OutletEntry OBJECT-TYPE + SYNTAX Pdu2OutletEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "The Outlet table entry containing the type, voltage, current etc." + INDEX { pdu2IdentIndex, pdu2OutletIndex } + ::= { pdu2OutletTable 1 } + +Pdu2OutletEntry ::= SEQUENCE { + pdu2OutletIndex INTEGER, + pdu2OutletName DisplayString, + pdu2OutletType INTEGER, + pdu2OutletCurrentRating INTEGER, + pdu2OutletCurrent INTEGER, + pdu2OutletCurrentThStatus INTEGER, + pdu2OutletCurrentThLowerWarning INTEGER, + pdu2OutletCurrentThLowerCritical INTEGER, + pdu2OutletCurrentThUpperWarning INTEGER, + pdu2OutletCurrentThUpperCritical INTEGER, + pdu2OutletCurrentCrestFactor INTEGER, + pdu2OutletCurrentPercentLoad INTEGER, + pdu2OutletVA INTEGER, + pdu2OutletWatts INTEGER, + pdu2OutletWh INTEGER, + pdu2OutletWhTimer DisplayString, + pdu2OutletPowerFactor INTEGER, + pdu2OutletVAR INTEGER +} + +pdu2OutletIndex OBJECT-TYPE + SYNTAX INTEGER (0..100) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Index for each outlet, value from 1 to the number of outlets per PDU." + ::= { pdu2OutletEntry 1 } + +pdu2OutletName OBJECT-TYPE + SYNTAX DisplayString (SIZE(1..31)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A descriptive name for the outlet." + ::= { pdu2OutletEntry 2 } + +pdu2OutletType OBJECT-TYPE + SYNTAX INTEGER { + iecC13 (1), + iecC19 (2), + uk (10), + french (11), + schuko (12), + nema515 (20), + nema51520 (21), + nema520 (22), + nemaL520 (23), + nemaL530 (24), + nema615 (25), + nema620 (26), + nemaL620 (27), + nemaL630 (28), + nemaL715 (29), + rf203p277 (30) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Type of this outlet - C13, C19." + ::= { pdu2OutletEntry 3 } + +pdu2OutletCurrentRating OBJECT-TYPE + SYNTAX INTEGER -- Units 0.001 A + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Rated current capacity of this outlet. Units are milliamps. A negative + value indicates that the hardware current capacity is unknown." + ::= { pdu2OutletEntry 4 } + +pdu2OutletCurrent OBJECT-TYPE + SYNTAX INTEGER -- Units 0.001 A + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A outlet current measurement value. Units are milliamps." + ::= { pdu2OutletEntry 5 } + +pdu2OutletCurrentThStatus OBJECT-TYPE + SYNTAX INTEGER { + good (1), + lowWarning (2), + lowCritical (3), + highWarning (4), + highCritical (5) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Status of the measured outlet current relative to the configured thresholds." + ::= { pdu2OutletEntry 6 } + +pdu2OutletCurrentThLowerWarning OBJECT-TYPE + SYNTAX INTEGER (-1..100000) -- Units 0.001 A + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Lower warning threshold. Units are milliamps. A negative value indicates + that this object is not available." + ::= { pdu2OutletEntry 7 } + +pdu2OutletCurrentThLowerCritical OBJECT-TYPE + SYNTAX INTEGER (-1..100000) -- Units 0.001 A + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Lower critical threshold. Units are milliamps. A negative value indicates + that this object is not available." + ::= { pdu2OutletEntry 8 } + +pdu2OutletCurrentThUpperWarning OBJECT-TYPE + SYNTAX INTEGER (-1..100000) -- Units 0.001 A + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Upper warning threshold. Units are milliamps. A negative value indicates + that this object is not available." + ::= { pdu2OutletEntry 9 } + +pdu2OutletCurrentThUpperCritical OBJECT-TYPE + SYNTAX INTEGER (-1..100000) -- Units 0.001 A + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Upper critical threshold. Units are milliamps. A negative value indicates + that this object is not available." + ::= { pdu2OutletEntry 10 } + +pdu2OutletCurrentCrestFactor OBJECT-TYPE + SYNTAX INTEGER -- units 0.001 + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Current crest factor. Units are in milli, for example a crest factor of + 1.414 will be returned as 1414. A negative value indicates + that this object is not available." + ::= { pdu2OutletEntry 11 } + +pdu2OutletCurrentPercentLoad OBJECT-TYPE + SYNTAX INTEGER -- unit in percentage + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Current percent load, based on the rated current capacity. Units are + percentage, for example 80% will be returned as 80. A negative + value indicates that this object is not available." + ::= { pdu2OutletEntry 12 } + +pdu2OutletVA OBJECT-TYPE + SYNTAX INTEGER -- units in VA + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A outlet VA value. Units are VA. A negative value indicates + that this object is not available." + ::= { pdu2OutletEntry 13 } + +pdu2OutletWatts OBJECT-TYPE + SYNTAX INTEGER -- units in Watt + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A outlet Watts value. Units are Watts. A negative value indicates + that this object is not available." + ::= { pdu2OutletEntry 14 } + +pdu2OutletWh OBJECT-TYPE + SYNTAX INTEGER -- Units in Watt-Hour + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A Watt-Hour value for each outlet. Units are WH. +This object is writable so that it can be reset to 0. When it is + written to, the pdu2OutletWhTimer will be reset updated as well + A negative value indicates that this object is not available." + ::= { pdu2OutletEntry 15 } + +pdu2OutletWhTimer OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..22)) -- display Date and Time + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Timestamp (date and time) of outlet Watt-hours was last reset." + ::= { pdu2OutletEntry 16 } + +pdu2OutletPowerFactor OBJECT-TYPE + SYNTAX INTEGER -- units are in 0.001 + ACCESS read-only + STATUS mandatory + DESCRIPTION + "An outlet PF value. Units are in thousandths, for example a power factor + of 0.958 would be returned as 958, and 0.92 would be returned + as 920. A negative value indicates that this object is not available." + ::= { pdu2OutletEntry 17 } + +pdu2OutletVAR OBJECT-TYPE + SYNTAX INTEGER -- Units in VAR + ACCESS read-only + STATUS mandatory + DESCRIPTION + "An outlet VAR value. Units are VAR. A negative value indicates + that this object is not available." + ::= { pdu2OutletEntry 18 } + + + +-- ====================== PDU Outlet Control===================== + +pdu2OutletControlTable OBJECT-TYPE + SYNTAX SEQUENCE OF Pdu2OutletControlEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Aggregate Object with number of entries equal to Number of PDU (pdu2IdentIndex) + and Number of outlets per PDU (pdu2OutletIndex)." + ::= { pdu2Outlet 2 } + +pdu2OutletControlEntry OBJECT-TYPE + SYNTAX Pdu2OutletControlEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "The Outlet table entry containing the type, voltage, current etc." + INDEX { pdu2IdentIndex, pdu2OutletIndex } + ::= { pdu2OutletControlTable 1 } + +Pdu2OutletControlEntry ::= SEQUENCE { + + pdu2OutletControlStatus INTEGER, + pdu2OutletControlOffCmd INTEGER, + pdu2OutletControlOnCmd INTEGER, + pdu2OutletControlRebootCmd INTEGER, + pdu2OutletControlPowerOnState INTEGER, + pdu2OutletControlSequenceDelay INTEGER, + pdu2OutletControlRebootOffTime INTEGER, + pdu2OutletControlSwitchable INTEGER, + pdu2OutletControlShutoffDelay INTEGER +} + +pdu2OutletControlStatus OBJECT-TYPE + SYNTAX INTEGER { + off (1), + on (2), + pendingOff (3), + pendingOn (4) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "current state of a control outlet." + ::= { pdu2OutletControlEntry 1 } + +pdu2OutletControlOffCmd OBJECT-TYPE + SYNTAX INTEGER (-1..99999) + ACCESS read-write + STATUS mandatory + DESCRIPTION + "When write, once issued, the outlet will turn Off immediately. + 0-n: Time in seconds until the outlet command is issued + -1: Cancel a pending outlet Off command + When read, returns -1 if no command is pending, or the current downcount in + seconds of a pending command." + ::= { pdu2OutletControlEntry 2 } + +pdu2OutletControlOnCmd OBJECT-TYPE + SYNTAX INTEGER (-1..99999) + ACCESS read-write + STATUS mandatory + DESCRIPTION + "When write, once issued, the outlet will turn On immediately. + 0-n: Time in seconds until the outlet command is issued + -1: Cancel a pending outlet On command + When read, returns -1 if no command is pending, or the current downcount in + seconds of a pending command." + ::= { pdu2OutletControlEntry 3 } + +pdu2OutletControlRebootCmd OBJECT-TYPE + SYNTAX INTEGER (-1..99999) + ACCESS read-write + STATUS mandatory + DESCRIPTION + "When write, for outlets that are On prior to this Reboot command, they will + switch Off immediately when the command is issued, remain Off for + outletControlRebootOffTime seconds, and then turn back On. + For outlets that are Off prior to the Reboot command, they will turn On after + a delay of outletControlRebootOffTime seconds from when the command is issued. + 0-n : Time in seconds until the Reboot command is issued + -1 : Cancel a pending outlet Reboot command + + When read, returns -1 if no command is pending, or the current downcount in + seconds of a pending command." + ::= { pdu2OutletControlEntry 4 } + +pdu2OutletControlPowerOnState OBJECT-TYPE + SYNTAX INTEGER { + off (1), + on (2), + lastState (3) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Determines the outlet state when power is applied to the unit. + 1 : not restart at device startup + 2 : should sequence back ON in line with outletControlSequenceTime + 3 : should take the state the outlet had when power was lost. + If the state was ON, should sequence back ON in line with outletControlSequenceTime." + ::= { pdu2OutletControlEntry 5 } + +pdu2OutletControlSequenceDelay OBJECT-TYPE + SYNTAX INTEGER (-1..99999) + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Time delay in seconds from when a Global Sequence On command is issued to + when the command is executed on this outlet. This delay is also used as a power-on + delay. Set to -1 to exclude this outlet from Global Sequence On commands." + ::= { pdu2OutletControlEntry 6 } + +pdu2OutletControlRebootOffTime OBJECT-TYPE + SYNTAX INTEGER (-1..99999) + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Time delay in seconds that the outlet should remain in the Off state when executing a Reboot command." + ::= { pdu2OutletControlEntry 7 } + +pdu2OutletControlSwitchable OBJECT-TYPE + SYNTAX INTEGER { + switchable (1), + notSwitchable (2) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Determines the outlet capability to be controlled On/Off from the communication channels. + 1 : control On/Off enabled + 2 : control On/Off disabled." + ::= { pdu2OutletControlEntry 8 } + +pdu2OutletControlShutoffDelay OBJECT-TYPE + SYNTAX INTEGER (-1..99999) + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Time delay in seconds that could be taken in account before shutting of the outlet. + An application which need to shutoff properly an outlet will read this parameter first + then write it to the command pdu2OutletControlOffCmd." + ::= { pdu2OutletControlEntry 9 } + + + + +-- =========================================================================================================== +-- +-- High Voltage PDU +-- Model 1: Dual Node, DLC (direct liquid cooling) (1 input, 2 monitored outputs (2A and 3.4A), ignore 4 of 25.4A outlets) +-- Model 2: Single Node, non-DLC (direct liquid cooling) (1 monitored input, 5 monitored outputs) +-- SNMP Agent is implemented on APM module connecting to hpdu via a serial communication. +-- +-- ============================================================================================================ +-- +-- hpdu OBJECT IDENTIFIER ::= {cpqPower 9} +-- hpduIdent OBJECT IDENTIFIER ::= { hpdu 1 } +-- hpdu (or iPDU) identification group +-- OID= .1.3.6.1.4.1.232.165.9.1 + +hpduNumPhase OBJECT-TYPE + SYNTAX INTEGER (0..100) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "for 3 phases" + ::= { hpduIdent 1 } + +hpduIdentTable OBJECT-TYPE + SYNTAX SEQUENCE OF HpduIdentEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION "Indexed by 1 Hpdu unit." + ::= { hpduIdent 2 } + +hpduIdentEntry OBJECT-TYPE + SYNTAX HpduIdentEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION "The table entry containing the identifications of HPDU" + INDEX { hpduIdentIndex } + ::= { hpduIdentTable 1 } + +HpduIdentEntry ::= SEQUENCE { + hpduIdentIndex INTEGER, + hpduManufacturer DisplayString, + hpduModel DisplayString, + hpduName DisplayString, + hpduFirmwareVersion DisplayString, + hpduHardwareVersion DisplayString, + hpduPartNumber DisplayString, + hpduSerialNumber DisplayString, + hpduUUID DisplayString, + hpduType DisplayString, + hpduPowerRating DisplayString, + hpduInputRating DisplayString, + hpduRegionalNominalVoltage DisplayString, + hpduNumOutputBreakers INTEGER, + hpduNumMonitoredOutlet INTEGER, + hpduFanStatus DisplayString, + + hpduTemperature INTEGER + } + +hpduIdentIndex OBJECT-TYPE + SYNTAX INTEGER (0..100) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Index for the MpduIdentEntry table. Start with 1" + ::= { hpduIdentEntry 1 } + +hpduManufacturer OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + " The Core PDU manufacturer. StringLength=[21]" + ::= { hpduIdentEntry 2 } + +hpduModel OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The Core PDU model, marketing name. StringLength=[40]." + ::= { hpduIdentEntry 3 } + +hpduName OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The Core PDU name, descriptive name or hostname. StringLength=[16]." + ::= { hpduIdentEntry 4 } + +hpduFirmwareVersion OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The Core PDU firmware version(s). StringLength=[12]." + ::= { hpduIdentEntry 5 } + +hpduHardwareVersion OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The Core PDU hardware version. StringLength=[8]." + ::= { hpduIdentEntry 6 } + +hpduPartNumber OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The Core PDU part number. StringLength=[21]." + ::= { hpduIdentEntry 7 } + +hpduSerialNumber OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The PDU external serial number. StringLength=[21]." + ::= { hpduIdentEntry 8 } + +hpduUUID OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The PDU's UUID equals PN add SN, canonical conversion. StringLength=[37]." + ::= { hpduIdentEntry 9 } + +hpduType OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The PDU's Type: Delta, Wye, single, Wye+lowline. + StringLength=[24]." + ::= { hpduIdentEntry 10 } + +hpduPowerRating OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The PDU's Power Rating in KVA (Name Plate). Value is presented + in 1/100 of the KVA. i.e. 1750 means 17.50 KVA" + ::= { hpduIdentEntry 11 } + +hpduInputRating OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The PDU's Input Current Rating in A (Name Plate)" + ::= { hpduIdentEntry 12 } + + +hpduRegionalNominalVoltage OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "value is either America(208V), Japan(202V) or blank for International Model" + ::= { hpduIdentEntry 13 } + +hpduNumOutputBreakers OBJECT-TYPE + SYNTAX INTEGER (0..10) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of outlets with breakers of each hpdu." + ::= { hpduIdentEntry 14 } + +hpduNumMonitoredOutlet OBJECT-TYPE + SYNTAX INTEGER (0..10) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of measured outlets (with CT, VT) of each hpdu." + ::= { hpduIdentEntry 15 } + +hpduFanStatus OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Report fan status: OK or FAIL" + ::= { hpduIdentEntry 16 } + +hpduTemperature OBJECT-TYPE + SYNTAX INTEGER -- UNITS 0.1 Degree Celcius, Range: 0.0 to 105.0 + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The internal temperature in Celcius. Value is presented in 1/10 of a degree i.e. 251 is 25.1. A value + of -1 will be returned if the temperature is unable to be measured." + ::= { hpduIdentEntry 17 } + +-- ==================================================================================== +-- +-- hpdu OBJECT IDENTIFIER ::= {cpqPower 9} +-- hpduIput OBJECT IDENTIFIER ::= { hpdu 2 } +-- High Voltage PDU Input Measurements (1 hardwired input) +-- OID= .1.3.6.1.4.1.232.165.9.2 + +hpduInputTable OBJECT-TYPE + SYNTAX SEQUENCE OF HpduInputEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Indexed by hpduNumPhase." + ::= { hpduInput 1 } + +hpduInputEntry OBJECT-TYPE + SYNTAX HpduInputEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "The Input table entry containing the voltage, current, PF, + percent load, VA, Watts for the HPDU." + + INDEX { hpduInputIndex } + ::= { hpduInputTable 1 } + +HpduInputEntry ::= SEQUENCE { + hpduInputIndex INTEGER, + hpduInputStatus DisplayString, + hpduInputBreakerRating INTEGER, + hpduInputVoltage INTEGER, + hpduInputCurrent INTEGER, + hpduInputPowerVA INTEGER, + hpduInputPowerWatt INTEGER, + hpduInputPowerFactor INTEGER, + hpduInputWarningThreshold INTEGER, + hpduInputCriticalThreshold INTEGER, + hpduInputPowerWattHour INTEGER, + hpduInputTotalEnergySince DisplayString, + hpduInputEnergyMeteringTotalHours INTEGER + + } + +hpduInputIndex OBJECT-TYPE + SYNTAX INTEGER (0..100) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Index for the hpduInputEntry table." + ::= { hpduInputEntry 1 } + +hpduInputStatus OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The overall status of the Input: off, on, problem. StringLength=[7]." + ::= { hpduInputEntry 2 } + +hpduInputBreakerRating OBJECT-TYPE + SYNTAX INTEGER --UNITS A + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The rating of each hpdu Input in Ampere." + ::= { hpduInputEntry 3 } + +hpduInputVoltage OBJECT-TYPE + SYNTAX INTEGER -- UNITS RMS 0.1 Volts + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The measured Input voltage from the PDU meters in volts. Value is + presented in 1/10 of the Volt i.e. 2095 is 209.5 V. A value + of -1 will be returned if the voltage is unable to be measured." + ::= { hpduInputEntry 4 } + +hpduInputCurrent OBJECT-TYPE + SYNTAX INTEGER -- UNITS RMS 0.01 Amp + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The measured Input current from the PDU meters in amps. Value is + presented in 1/100 of the Ampere i.e. 175 is 1.75 A. A value + of -1 will be returned if the current is unable to be measured." + ::= { hpduInputEntry 5 } + +hpduInputPowerVA OBJECT-TYPE + SYNTAX INTEGER -- Units VA + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total Input Power measured in VA. A value + of -1 will be returned if the power is unable to be calculated." + ::= { hpduInputEntry 6 } + +hpduInputPowerWatt OBJECT-TYPE + SYNTAX INTEGER -- Units Watts + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total Input power measured in Watts. A value + of -1 will be returned if the power is unable to be calculated." + ::= { hpduInputEntry 7 } + +hpduInputPowerFactor OBJECT-TYPE + SYNTAX INTEGER -- 0.01 UNITS + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The Input power factor is presented in 1/100 of the unit i.e. + 98 is 0.98. A value of -1 will be returned if the power factor is unable + to be measured." + ::= { hpduInputEntry 8 } + +hpduInputWarningThreshold OBJECT-TYPE + SYNTAX INTEGER -- Percents + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Report the User-setting Input threshhold limit for Warning in percentage" + ::= { hpduInputEntry 9 } + +hpduInputCriticalThreshold OBJECT-TYPE + SYNTAX INTEGER -- Percents + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Report the User-setting Input threshhold limit for Critical in percentage" + ::= { hpduInputEntry 10 } + +hpduInputPowerWattHour OBJECT-TYPE + SYNTAX INTEGER -- Units Watt-Hour (WH) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Support Billing Grade Energy Metering in Watt-Hour. A value + of -1 will be returned if the power is unable to be calculated." + ::= { hpduInputEntry 11 } + +hpduInputTotalEnergySince OBJECT-TYPE + SYNTAX DisplayString --display date and time as "MM/DD/YYYY and HH:MM:SS" + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Display the date and time that starts to accumulate the per Load segment energy in WH. + Date and Time can be set by user on GUI." + ::= { hpduInputEntry 12 } + +hpduInputEnergyMeteringTotalHours OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Total hours of collecting measurement data. A value + of -1 will be returned if the value is unable to be calculated." + ::= { hpduInputEntry 13 } + + + + +-- ==================================================================================== +-- +-- hpdu OBJECT IDENTIFIER ::= {cpqPower 9} +-- hpduOutlet OBJECT IDENTIFIER ::= { hpdu 3 } +-- High Voltage PDU Outlet Measurements (2 for Holder PDU and 5 for others) +-- OID= .1.3.6.1.4.1.232.165.9.3 + +hpduOutletTable OBJECT-TYPE + SYNTAX SEQUENCE OF HpduOutletEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Indexed by hpduNumMonitoredOutlet and hpduNumPhase . So aggregate objects for each entry + equal to (hpduNumMonitoredOutlet x hpduNumPhase). Start with 1." + ::= { hpduOutlet 1 } + +hpduOutletEntry OBJECT-TYPE + SYNTAX HpduOutletEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "The Outlet table entry containing the voltage, current, PF, + percent load, VA, Watts for the Modular PDU." + + INDEX { hpduNumMonitoredOutlet, hpduNumPhase, hpduOutletIndex } + ::= { hpduOutletTable 1 } + +HpduOutletEntry ::= SEQUENCE { + hpduOutletIndex INTEGER, + hpduOutletStatus DisplayString, + hpduOutletBreakerRating INTEGER, + hpduOutletPercentLoad INTEGER, + hpduOutletVoltage INTEGER, + hpduOutletCurrent INTEGER, + hpduOutletPowerVA INTEGER, + hpduOutletPowerWatt INTEGER, + hpduOutletPowerFactor INTEGER, + hpduOutletWarningThreshold INTEGER, + hpduOutletCriticalThreshold INTEGER, + hpduOutletPowerWattHour INTEGER, + hpduOutletTotalEnergySince DisplayString, + hpduOutletEnergyMeteringTotalHours INTEGER + } + +hpduOutletIndex OBJECT-TYPE + SYNTAX INTEGER (0..100) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Index for the hpduOutletEntry table." + ::= { hpduOutletEntry 1 } + +hpduOutletStatus OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The overall status of the breaker: off, on, problem. StringLength=[7]." + ::= { hpduOutletEntry 2 } + +hpduOutletBreakerRating OBJECT-TYPE + SYNTAX INTEGER --UNITS A + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The rating of each hpdu Outlet in Ampere." + ::= { hpduOutletEntry 3 } + +hpduOutletPercentLoad OBJECT-TYPE + SYNTAX INTEGER --UNITS 0.1 Percents + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The hpdu's each Outlet load in percent of rated capacity. Value is + presented in 1/10 of the percentage i.e. 125 is 12.5%. A value + of -1 will be returned if the current is unable to be measured." + ::= { hpduOutletEntry 4 } + +hpduOutletVoltage OBJECT-TYPE + SYNTAX INTEGER -- UNITS RMS 0.1 Volts + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The measured Outlet voltage from the PDU meters in volts. Value is + presented in 1/10 of the Volt i.e. 2095 is 209.5 V. A value + of -1 will be returned if the voltage is unable to be measured." + ::= { hpduOutletEntry 5 } + +hpduOutletCurrent OBJECT-TYPE + SYNTAX INTEGER -- UNITS RMS 0.01 Amp + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The measured Outlet current from the PDU meters in amps. Value is + presented in 1/100 of the Ampere i.e. 175 is 1.75 A. A value + of -1 will be returned if the current is unable to be measured." + ::= { hpduOutletEntry 6 } + +hpduOutletPowerVA OBJECT-TYPE + SYNTAX INTEGER -- Units VA + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total VA load (VI) measured on the PDU in VA. A value + of -1 will be returned if the power is unable to be calculated." + ::= { hpduOutletEntry 7 } + +hpduOutletPowerWatt OBJECT-TYPE + SYNTAX INTEGER -- Units Watts + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total power load measured on the PDU in Watts. A value + of -1 will be returned if the power is unable to be calculated." + ::= { hpduOutletEntry 8 } + +hpduOutletPowerFactor OBJECT-TYPE + SYNTAX INTEGER -- 0.01 UNITS + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The power factor is presented in 1/100 of the unit i.e. + 98 is 0.98. A value of -1 will be returned if the power factor is unable + to be measured." + ::= { hpduOutletEntry 9 } + +hpduOutletWarningThreshold OBJECT-TYPE + SYNTAX INTEGER -- Percents + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Report the User-set threshhold limit for Warning in percentage" + ::= { hpduOutletEntry 10 } + +hpduOutletCriticalThreshold OBJECT-TYPE + SYNTAX INTEGER -- Percents + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Report the User-set threshhold limit for Critical in percentage" + ::= { hpduOutletEntry 11 } + +hpduOutletPowerWattHour OBJECT-TYPE + SYNTAX INTEGER -- Units Watt-Hour (WH) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Support Billing Grade Energy Metering in Watt-Hour. A value + of -1 will be returned if the power is unable to be calculated." + ::= { hpduOutletEntry 12 } + +hpduOutletTotalEnergySince OBJECT-TYPE + SYNTAX DisplayString --display date and time as "MM/DD/YYYY and HH:MM:SS" + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Display the date and time that starts to accumulate the per Load segment energy in WH. + Date and Time can be set by user on GUI." + ::= { hpduOutletEntry 13 } + +hpduOutletEnergyMeteringTotalHours OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Total hours of collecting measurement data. A value + of -1 will be returned if the value is unable to be calculated." + ::= { hpduOutletEntry 14 } + + + +-- ==================================================================================== +-- PDU3 - monitored and managed PDU line +-- PDU3 (CIS PDU) - Metered PDU - Switched PDU - Metered+Switched PDU +-- ==================================================================================== +-- +-- pdu3 OBJECT IDENTIFIER ::= {cpqPower 11} +-- pdu3Ident OBJECT IDENTIFIER ::= { pdu3 1 } +-- PDU identification group +-- OID= .1.3.6.1.4.1.232.165.11.1 + +pdu3NumberPDU OBJECT-TYPE + SYNTAX INTEGER (1..2) -- pdu(0) master or pdu(1) slave1... + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of PDUs detected (in its daisy chain)." + ::= { pdu3Ident 1 } + +-- ======= pdu3 Identification =========== + +pdu3IdentTable OBJECT-TYPE + SYNTAX SEQUENCE OF Pdu3IdentEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION "Aggregate Object with number of entries equal to pdu3NumberPDU ." + ::= { pdu3Ident 2 } + +pdu3IdentEntry OBJECT-TYPE + SYNTAX Pdu3IdentEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION "The ident table entry containing the name, model, manufacturer, + firmware version, part number, etc." + INDEX { pdu3IdentIndex } + ::= { pdu3IdentTable 1 } + +Pdu3IdentEntry ::= SEQUENCE { + pdu3IdentIndex INTEGER, + pdu3Name DisplayString, + pdu3Model DisplayString, + pdu3Manufacturer DisplayString, + pdu3FirmwareVersion DisplayString, + pdu3FirmwareVersionTimeStamp DisplayString, + pdu3PartNumber DisplayString, + pdu3SerialNumber DisplayString, + pdu3Status INTEGER, + pdu3Controllable INTEGER, + pdu3InputPhaseCount INTEGER, + pdu3GroupCount INTEGER, + pdu3OutletCount INTEGER, + pdu3MACAddress DisplayString, + pdu3IPv4Address DisplayString, + pdu3IPv6Address DisplayString + } + +pdu3IdentIndex OBJECT-TYPE + SYNTAX INTEGER (0..100) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Index for the Pdu3IdentEntry table." + ::= { pdu3IdentEntry 1 } + +pdu3Name OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..63)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The string identify the device in daisy chain. Example PDU A." + ::= { pdu3IdentEntry 2 } + +pdu3Model OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..63)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The Device Model." + ::= { pdu3IdentEntry 3 } + +pdu3Manufacturer OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..63)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The Device Manufacturer Name (e.g. Hewlett-Packard)." + ::= { pdu3IdentEntry 4 } + +pdu3FirmwareVersion OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..63)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The firmware revision level of the device." + ::= { pdu3IdentEntry 5 } + +pdu3FirmwareVersionTimeStamp OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Timestamp of when the PDU firmware was last updated" + ::= { pdu3IdentEntry 6 } + +pdu3PartNumber OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..63)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The device part number. Example AF400A." + ::= { pdu3IdentEntry 7 } + +pdu3SerialNumber OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..63)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The device serial number, 10- or 16-digit." + ::= { pdu3IdentEntry 8 } + +pdu3Status OBJECT-TYPE + SYNTAX INTEGER + { + other(1), + ok(2), -- default + degraded(3), + failed(4) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The overall status of the device. A value of OK(2) indicates the device is operating normally. + A value of degraded(3) indicates the device is operating with warning indicators. A value of + failed(4) indicates the device is operating with critical indicators." + ::= { pdu3IdentEntry 9 } + +pdu3Controllable OBJECT-TYPE + SYNTAX INTEGER + { + yes(1), + no(2) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "This object indicates whether or not the device is controllable." + ::= { pdu3IdentEntry 10 } + +pdu3InputPhaseCount OBJECT-TYPE + SYNTAX INTEGER (0..63) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of input phase on this pdu 1,2,3." + ::= { pdu3IdentEntry 11 } + +pdu3GroupCount OBJECT-TYPE + SYNTAX INTEGER (0..63) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of groups (breakers) on this pdu." + ::= { pdu3IdentEntry 12 } + +pdu3OutletCount OBJECT-TYPE + SYNTAX INTEGER (0..63) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of outlets in this PDU." + ::= { pdu3IdentEntry 13 } + +pdu3MACAddress OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The assigned MAC address for this PDU." + ::={ pdu3IdentEntry 14 } + +pdu3IPv4Address OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The current IPv4 Address. + A value of 0.0.0.0 indicates an error or an unset option." + ::={ pdu3IdentEntry 15 } + +pdu3IPv6Address OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The current IPv6 Address. + A vale of 0.0.0.0.0.0 indicates an error or an unset option." + ::={ pdu3IdentEntry 16 } + +-- ============ pdu3 Configuration ======= + +pdu3ConfigTable OBJECT-TYPE + SYNTAX SEQUENCE OF Pdu3ConfigEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION "Aggregate Object with number of entries equal to pdu3NumberPDU ." + ::= { pdu3Ident 3 } + +pdu3ConfigEntry OBJECT-TYPE + SYNTAX Pdu3ConfigEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Read Configuration data from the PDU being queried." + INDEX {pdu3ConfigIndex} + ::= {pdu3ConfigTable 1} + +Pdu3ConfigEntry ::= SEQUENCE{ + pdu3ConfigIndex INTEGER, + pdu3ConfigSsh INTEGER, + pdu3ConfigFtps INTEGER, + pdu3ConfigHttp INTEGER, + pdu3ConfigHttps INTEGER, + pdu3ConfigIPv4IPv6Switch INTEGER, + pdu3ConfigRedfishAPI INTEGER, + pdu3ConfigOledDispalyOrientation INTEGER, + pdu3ConfigEnergyReset INTEGER, + pdu3ConfigNetworkManagementCardReset INTEGER, + pdu3ConfigDaisyChainStatus INTEGER + } + +pdu3ConfigIndex OBJECT-TYPE + SYNTAX INTEGER (0..20) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The index of PDU configuration entry." + ::={pdu3ConfigEntry 1} + +pdu3ConfigSsh OBJECT-TYPE + SYNTAX INTEGER{ + off(0), + on(1) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Setting this OID to off(0) will disable the SSH conneciton. + Setting this OID to on(1) will enable the SSH connection." + ::={pdu3ConfigEntry 2} + +pdu3ConfigFtps OBJECT-TYPE + SYNTAX INTEGER{ + off(0), + on(1) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Setting this OID to off(0) will disable the FTPS connection. + Setting this OID to on(1) will enable the FTPS connection." + ::={pdu3ConfigEntry 3} + +pdu3ConfigHttp OBJECT-TYPE + SYNTAX INTEGER{ + off(0), + on(1) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Setting this OID to off(0) will disable the HTTP connection. + Setting this OID to on(1) will enable the HTTP connection." + ::={pdu3ConfigEntry 4} + +pdu3ConfigHttps OBJECT-TYPE + SYNTAX INTEGER{ + off(0), + on(1) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Setting this OID to off(0) will disable the HTTPS connection. + Setting this OID to on(1) will enable the HTTPS connection." + ::={pdu3ConfigEntry 5} + +pdu3ConfigIPv4IPv6Switch OBJECT-TYPE + SYNTAX INTEGER{ + iPv4(1), + iPv6(2), + iPv4IPv6(3) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Setting this OID to IPv4(1) will enable the IPv4 configuration. + Setting this OID to IPv6(2) will enable the IPv6 configuration. + Setting this OID to IPv4&IPv6(3) will enable both IPv4 and IPv6 configuration." + ::={pdu3ConfigEntry 6} + +pdu3ConfigRedfishAPI OBJECT-TYPE + SYNTAX INTEGER{ + off(0), + on(1) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Setting this OID to off(0) will disable the Redfish API. + Setting this OID to on(1) will enable the Redfish API." + ::={pdu3ConfigEntry 7} + +pdu3ConfigOledDispalyOrientation OBJECT-TYPE + SYNTAX INTEGER{ + displayNormal(1), + displayReverse(2) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Indicates the intended physical orientation of OLED display. + displayNormal(1) indicates normal orientation. + displayReverse(2) indicates upside down orientation." + ::={pdu3ConfigEntry 8} + +pdu3ConfigEnergyReset OBJECT-TYPE + SYNTAX INTEGER{ + noOperation(1), + reset(2), + notSupported(3) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Setting this OID to reset(2) will cause the device energy meter value + to be reset to zero. Getting this OID in models that support this feature + will do nothing and return the noOperation(1) value. Models that do not + supported this feature will respond to this OID with a value of notSupported(3). + Attempts to set this OID in these models will fail." + ::={pdu3ConfigEntry 9} + +pdu3ConfigNetworkManagementCardReset OBJECT-TYPE + SYNTAX INTEGER{ + noOperation(0), + reset(1) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Getting this OID will return noOperation(0). + Getting this OID to reset(1) will reset NMC." + ::={pdu3ConfigEntry 10} + +pdu3ConfigDaisyChainStatus OBJECT-TYPE + SYNTAX INTEGER{ + daisychain(0) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Setting this OID to daisychain(0) will enable daisychain mode." + ::={pdu3ConfigEntry 11} + + + + +-- ==================================================================================== +-- +-- pdu3 OBJECT IDENTIFIER ::= {cpqPower 11} +-- pdu3Input OBJECT IDENTIFIER ::= { pdu3 2 } +-- PDU3 input group +-- OID= .1.3.6.1.4.1.232.165.11.2 + +pdu3InputTable OBJECT-TYPE + SYNTAX SEQUENCE OF Pdu3InputEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Aggregate Object with number of entries equal to pdu3NumberPDU ." + ::= { pdu3Input 1 } + +pdu3InputEntry OBJECT-TYPE + SYNTAX Pdu3InputEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "The ident table entry containing the VA, Watts, WH, etc." + INDEX { pdu3IdentIndex } + ::= { pdu3InputTable 1 } + +Pdu3InputEntry ::= SEQUENCE { + pdu3InputType INTEGER, + pdu3InputFrequency INTEGER, + pdu3InputFrequencyStatus INTEGER, + pdu3InputPowerVA INTEGER, + pdu3InputPowerWatts INTEGER, + pdu3InputTotalEnergy INTEGER, + pdu3InputPowerWattHourTimer DisplayString, + pdu3InputResettableEnergy INTEGER, + pdu3InputPowerFactor INTEGER, + pdu3InputPowerVAR INTEGER + } + +pdu3InputType OBJECT-TYPE + SYNTAX INTEGER { + singlePhase (1), + splitPhase (2), + threePhaseDelta (3), + threePhaseWye (4) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Type of input - single phase, split phase, three phase delta, or three + phase wye." + ::= { pdu3InputEntry 1 } + +pdu3InputFrequency OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) -- UNITS RMS 0.1 Hz + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The measured input frequency from the PDU meters in tenths of Hz." + ::= { pdu3InputEntry 2 } + +pdu3InputFrequencyStatus OBJECT-TYPE + SYNTAX INTEGER { + good (1), + outOfRange (2) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Status of the measured input frequency relative to the nominal frequency and the admitted tolerance." + ::= { pdu3InputEntry 3 } + +pdu3InputPowerVA OBJECT-TYPE + SYNTAX INTEGER -- Units in VA + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A total input VA of all phases. Units are 0.001 VA. A negative value indicates + that this object is not available." + ::= { pdu3InputEntry 4 } + +pdu3InputPowerWatts OBJECT-TYPE + SYNTAX INTEGER -- Units in Watts + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A total input Watts of all phases. Units are 0.001 Watts. A negative value indicates + that this object is not available." + ::= { pdu3InputEntry 5 } + +pdu3InputTotalEnergy OBJECT-TYPE + SYNTAX INTEGER -- Units in kWh + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A total input Watt-Hour value for all phases. Units are KWh. This value is accumulated since PDU in service. + A negative value indicates that this object is not available." + ::= { pdu3InputEntry 6 } + +pdu3InputPowerWattHourTimer OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..22)) -- display Date Time Since Last Reset + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A Timestamp of when the Total Input WH was last reset." + ::= { pdu3InputEntry 7 } + +pdu3InputResettableEnergy OBJECT-TYPE + SYNTAX INTEGER -- Units in kWh + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A total input Watt-Hour value for all phases. Units are 0.001 Wh. This value can be reset to 0 + using GUI. In that case, the pdu3InputPowerWattHourTimer will be reset as well + A negative value indicates that this object is not available." + ::= { pdu3InputEntry 8 } + +pdu3InputPowerFactor OBJECT-TYPE + SYNTAX INTEGER -- units 0.01 + ACCESS read-only + STATUS mandatory + DESCRIPTION + "An input PF value. Units are in thousandths, for example a power factor + of 0.958 would be returned as 958, and 0.92 would be returned as 920. + A negative value indicates that this object is not available." + ::= { pdu3InputEntry 9 } + +pdu3InputPowerVAR OBJECT-TYPE + SYNTAX INTEGER -- Units in VAR + ACCESS read-only + STATUS mandatory + DESCRIPTION + "An input VAR value. Units are 0.001 VAR. A negative value indicates + that this object is not available." + ::= { pdu3InputEntry 10 } + +-- ==========Input per Phase ============= + +pdu3InputPhaseTable OBJECT-TYPE + SYNTAX SEQUENCE OF Pdu3InputPhaseEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Aggregate Object with number of entries equal to number of PDUs (pdu3NumberPDU) and + number of input phase (pdu3InputPhaseCount)." + ::= {pdu3Input 2} + +pdu3InputPhaseEntry OBJECT-TYPE + SYNTAX Pdu3InputPhaseEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "The input table entry containing the voltage, current, frequency, power for each phase. + Entries are given with number of pdu and number of input phase 1, 2, or 3." + INDEX { pdu3IdentIndex, pdu3InputPhaseIndex } + ::= { pdu3InputPhaseTable 1 } + +Pdu3InputPhaseEntry ::= SEQUENCE { + pdu3InputPhaseIndex INTEGER, + pdu3InputPhaseVoltageMeasType INTEGER, + pdu3InputPhaseVoltage INTEGER, + pdu3InputPhaseVoltageThStatus INTEGER, + pdu3InputPhaseVoltageThLowerWarning INTEGER, + pdu3InputPhaseVoltageThLowerCritical INTEGER, + pdu3InputPhaseVoltageThUpperWarning INTEGER, + pdu3InputPhaseVoltageThUpperCritical INTEGER, + pdu3InputPhaseCurrentMeasType INTEGER, + pdu3InputPhaseCurrentRating INTEGER, + pdu3InputPhaseCurrent INTEGER, + pdu3InputPhaseCurrentThStatus INTEGER, + pdu3InputPhaseCurrentThLowerWarning INTEGER, + pdu3InputPhaseCurrentThLowerCritical INTEGER, + pdu3InputPhaseCurrentThUpperWarning INTEGER, + pdu3InputPhaseCurrentThUpperCritical INTEGER, + pdu3InputPhaseCurrentPercentLoad INTEGER, + pdu3InputPhasePowerMeasType INTEGER, + pdu3InputPhasePowerVA INTEGER, + pdu3InputPhasePowerWatts INTEGER, + pdu3InputPhasePowerWattHour INTEGER, + pdu3InputPhasePowerWattHourTimer DisplayString, + pdu3InputPhasePowerFactor INTEGER, + pdu3InputPhasePowerVAR INTEGER + } + +pdu3InputPhaseIndex OBJECT-TYPE + SYNTAX INTEGER (0..100) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Index for the Pdu3InputEntry table." + ::= { pdu3InputPhaseEntry 1} + +pdu3InputPhaseVoltageMeasType OBJECT-TYPE + SYNTAX INTEGER { + singlePhase (1), + phase1toN (2), + phase2toN (3), + phase3toN (4), + phase1to2 (5), + phase2to3 (6), + phase3to1 (7) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Value indicates what input voltage is being measured in this table row - single phase + voltage, phase 1 to neutral, phase 2 to neutral, phase 3 to neutral, phase 1 to phase 2, + phase 2 to phase 3, or phase 3 to phase 1." + ::= { pdu3InputPhaseEntry 2 } + +pdu3InputPhaseVoltage OBJECT-TYPE + SYNTAX INTEGER -- UNITS RMS 0.1 Volts + ACCESS read-only + STATUS mandatory + DESCRIPTION + "An input voltage measurement value. Return value is divided by 10." + ::= {pdu3InputPhaseEntry 3} + +pdu3InputPhaseVoltageThStatus OBJECT-TYPE + SYNTAX INTEGER { + good (1), + lowWarning (2), + lowCritical (3), + highWarning (4), + highCritical (5) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Status of the measured input voltage relative to the configured thresholds." + ::= { pdu3InputPhaseEntry 4 } + +pdu3InputPhaseVoltageThLowerWarning OBJECT-TYPE + SYNTAX INTEGER (-1..500000) -- Units in 0.1 V + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Lower warning threshold. Return value is divided by 10. A negative value indicates + that this object is not available." + ::= { pdu3InputPhaseEntry 5 } + +pdu3InputPhaseVoltageThLowerCritical OBJECT-TYPE + SYNTAX INTEGER (-1..500000) -- Units in 0.1 V + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Lower critical threshold. Return value is divided by 10. A negative value indicates + that this object is not available." + ::= { pdu3InputPhaseEntry 6 } + +pdu3InputPhaseVoltageThUpperWarning OBJECT-TYPE + SYNTAX INTEGER (-1..500000) -- Units in 0.1 V + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Upper warning threshold. Return value is divided by 10. A negative value indicates + that this object is not available." + ::= { pdu3InputPhaseEntry 7 } + +pdu3InputPhaseVoltageThUpperCritical OBJECT-TYPE + SYNTAX INTEGER (-1..500000) -- Units in 0.1 V + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Upper critical threshold. Return value is divided by 10. A negative value indicates + that this object is not available." + ::= { pdu3InputPhaseEntry 8 } + +pdu3InputPhaseCurrentMeasType OBJECT-TYPE + SYNTAX INTEGER { + singlePhase (1), + neutral (2), + phase1 (3), + phase2 (4), + phase3 (5) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Which input wire is being measured in this table row - single phase, neutral, phase 1, + phase 2, or phase 3." + ::= { pdu3InputPhaseEntry 9 } + +pdu3InputPhaseCurrentRating OBJECT-TYPE + SYNTAX INTEGER -- Units in 0.01 A + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Rated current capacity of the input. A negative value indicates that + the hardware current capacity is unknown. Return value is divided by 100." + ::= { pdu3InputPhaseEntry 10 } + +pdu3InputPhaseCurrent OBJECT-TYPE + SYNTAX INTEGER -- Units in 0.01 A + ACCESS read-only + STATUS mandatory + DESCRIPTION + "An input current measurement value. Return value is divided by 100." + ::= { pdu3InputPhaseEntry 11 } + +pdu3InputPhaseCurrentThStatus OBJECT-TYPE + SYNTAX INTEGER { + good (1), + lowWarning (2), + lowCritical (3), + highWarning (4), + highCritical (5) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Status of the measured input current relative to the configured thresholds." + ::= { pdu3InputPhaseEntry 12 } + +pdu3InputPhaseCurrentThLowerWarning OBJECT-TYPE + SYNTAX INTEGER (-1..100000) -- Units in 0.01 A + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Lower warning threshold. Return value is divided by 100. A negative value indicates + that this object is not available." + ::= { pdu3InputPhaseEntry 13 } + +pdu3InputPhaseCurrentThLowerCritical OBJECT-TYPE + SYNTAX INTEGER (-1..100000) -- Units in 0.01 A + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Lower critical threshold. Return value is divided by 100. A negative value indicates + that this object is not available." + ::= { pdu3InputPhaseEntry 14 } + +pdu3InputPhaseCurrentThUpperWarning OBJECT-TYPE + SYNTAX INTEGER (-1..100000) -- Units in 0.01 A + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Upper warning threshold. Return value is divided by 100. A negative value indicates + that this object is not available." + ::= { pdu3InputPhaseEntry 15 } + +pdu3InputPhaseCurrentThUpperCritical OBJECT-TYPE + SYNTAX INTEGER (-1..100000) -- Units in 0.01 A + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Upper critical threshold. Return value is divided by 100. A negative value indicates + that this object is not available." + ::= { pdu3InputPhaseEntry 16 } + +pdu3InputPhaseCurrentPercentLoad OBJECT-TYPE + SYNTAX INTEGER -- Units in 0.1 % + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Current percent load, based on the rated current capacity. Units are + percentage, for example 80.9 % will be returned as 809. A negative + value indicates that this object is not available." + ::= { pdu3InputPhaseEntry 17 } + +pdu3InputPhasePowerMeasType OBJECT-TYPE + SYNTAX INTEGER { + singlePhase (1), + neutral (2), + phase1 (3), + phase2 (4), + phase3 (5) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Which input wire is being measured in this table row - single phase, neutral, phase 1, + phase 2, or phase 3." + ::= { pdu3InputPhaseEntry 18 } + +pdu3InputPhasePowerVA OBJECT-TYPE + SYNTAX INTEGER -- Units in VA + ACCESS read-only + STATUS mandatory + DESCRIPTION + "An input VA value. Units are VA. A negative value indicates + that this object is not available." + ::= { pdu3InputPhaseEntry 19 } + +pdu3InputPhasePowerWatts OBJECT-TYPE + SYNTAX INTEGER -- Units in W + ACCESS read-only + STATUS mandatory + DESCRIPTION + "An input Watts value. Units are Watts. A negative value indicates + that this object is not available." + ::= { pdu3InputPhaseEntry 20 } + +pdu3InputPhasePowerWattHour OBJECT-TYPE + SYNTAX INTEGER -- Units in kWh for energy + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A kWatt-Hour value for each Input phase. Units are kWh. This value can be reset to 0 + using GUI. In that case, the pdu3InputPhasePowerWattHourTimer will be reset as well + A negative value indicates that this object is not available." + ::= { pdu3InputPhaseEntry 21 } + +pdu3InputPhasePowerWattHourTimer OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..22)) -- display Date Time + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Timestamp of when input phase kWatt-hours (kWh) was last reset." + ::= { pdu3InputPhaseEntry 22 } + +pdu3InputPhasePowerFactor OBJECT-TYPE + SYNTAX INTEGER -- units 0.01 + ACCESS read-only + STATUS mandatory + DESCRIPTION + "An input PF value. Return value is divided by 100, for example a power factor + of 0.95 would be returned as 95. A negative value indicates that this object is not available." + ::= { pdu3InputPhaseEntry 23 } + +pdu3InputPhasePowerVAR OBJECT-TYPE + SYNTAX INTEGER -- units VAR + ACCESS read-only + STATUS mandatory + DESCRIPTION + "An input VA Reactive value. Units are in VAR. A negative value indicates + that this object is not available." + ::= { pdu3InputPhaseEntry 24 } + + + +-- ==================================================================================== +-- +-- pdu3 OBJECT IDENTIFIER ::= {cpqPower 11} +-- pdu3Group OBJECT IDENTIFIER ::= { pdu3 3 } +-- PDU3 Output groups of outlets (or load segments) +-- OID= .1.3.6.1.4.1.232.165.11.3 + + +pdu3GroupTable OBJECT-TYPE + SYNTAX SEQUENCE OF Pdu3GroupEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION "Aggregate Object with number of entries equal to number of PDUs + and number of breakers (pdu3GroupCount)." + ::= { pdu3Group 1 } + +pdu3GroupEntry OBJECT-TYPE + SYNTAX Pdu3GroupEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "The input table entry containing the name, voltages, currents, power, etc." + INDEX { pdu3IdentIndex, pdu3GroupIndex } + ::= { pdu3GroupTable 1 } + +Pdu3GroupEntry ::= SEQUENCE { + pdu3GroupIndex INTEGER, + pdu3GroupName DisplayString, + pdu3GroupType INTEGER, + pdu3GroupVoltageMeasType INTEGER, + pdu3GroupVoltage INTEGER, + pdu3GroupVoltageThStatus INTEGER, + pdu3GroupVoltageThLowerWarning INTEGER, + pdu3GroupVoltageThLowerCritical INTEGER, + pdu3GroupVoltageThUpperWarning INTEGER, + pdu3GroupVoltageThUpperCritical INTEGER, + pdu3groupCurrentRating INTEGER, + pdu3GroupCurrent INTEGER, + pdu3GroupCurrentThStatus INTEGER, + pdu3GroupCurrentThLowerWarning INTEGER, + pdu3GroupCurrentThLowerCritical INTEGER, + pdu3GroupCurrentThUpperWarning INTEGER, + pdu3GroupCurrentThUpperCritical INTEGER, + pdu3GroupCurrentPercentLoad INTEGER, + pdu3GroupPowerVA INTEGER, + pdu3GroupPowerWatts INTEGER, + pdu3GroupPowerWattHour INTEGER, + pdu3GroupPowerWattHourTimer DisplayString, + pdu3GroupPowerFactor INTEGER, + pdu3GroupPowerVAR INTEGER, + pdu3GroupOutletCount INTEGER, + pdu3GroupBreakerStatus INTEGER + } + +pdu3GroupIndex OBJECT-TYPE + SYNTAX INTEGER (0..100) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Index for the Pdu3GroupEntry table." + ::= { pdu3GroupEntry 1 } + +pdu3GroupName OBJECT-TYPE + SYNTAX DisplayString (SIZE(1..31)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A descriptive name for the group." + ::= { pdu3GroupEntry 2 } + +pdu3GroupType OBJECT-TYPE + SYNTAX INTEGER { + breaker1pole (2), + breaker2pole (3), + breaker3pole (4), + outletSection (5) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The type of the group. (5) has no breaker" + ::= { pdu3GroupEntry 3 } + +pdu3GroupVoltageMeasType OBJECT-TYPE + SYNTAX INTEGER { + singlePhase (1), + phase1toN (2), + phase2toN (3), + phase3toN (4), + phase1to2 (5), + phase2to3 (6), + phase3to1 (7) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Value indicates what input voltage is being measured in this table row - single phase + voltage, phase 1 to neutral, phase 2 to neutral, phase 3 to neutral, phase 1 to phase 2, + phase 2 to phase 3, or phase 3 to phase 1." + ::= { pdu3GroupEntry 4 } + +pdu3GroupVoltage OBJECT-TYPE + SYNTAX INTEGER -- Units 0.1 V + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Return value is divided by 10 to get one decimal point, unit is in Volt." + ::= { pdu3GroupEntry 5 } + +pdu3GroupVoltageThStatus OBJECT-TYPE + SYNTAX INTEGER { + good (1), + lowWarning (2), + lowCritical (3), + highWarning (4), + highCritical (5) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Status of the measured group voltage relative to the configured thresholds." + ::= { pdu3GroupEntry 6 } + +pdu3GroupVoltageThLowerWarning OBJECT-TYPE + SYNTAX INTEGER (-1..500000) -- Units 0.1 V + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Lower warning threshold. Return value is divided by 10 to get one decimal point, + unit is in Volt. A negative value indicates that this object is not available." + ::= { pdu3GroupEntry 7 } + +pdu3GroupVoltageThLowerCritical OBJECT-TYPE + SYNTAX INTEGER (-1..500000) -- Units 0.1 V + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Lower critical threshold. Return value is divided by 10 to get one decimal point, + unit is in Volt. A negative value indicates that this object is not available." + ::= { pdu3GroupEntry 8 } + +pdu3GroupVoltageThUpperWarning OBJECT-TYPE + SYNTAX INTEGER (-1..500000) -- Units 0.1 V + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Upper warning threshold. Return value is divided by 10 to get one decimal point, + unit is in Volt. A negative value indicates that this object is not available." + ::= { pdu3GroupEntry 9 } + +pdu3GroupVoltageThUpperCritical OBJECT-TYPE + SYNTAX INTEGER (-1..500000) -- Units 0.1 V + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Upper critical threshold. Return value is divided by 10 to get one decimal point, + unit is in Volt. A negative value indicates that this object is not available." + ::= { pdu3GroupEntry 10 } + +pdu3groupCurrentRating OBJECT-TYPE + SYNTAX INTEGER -- Units 0.01 A + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Rated current capacity of the group. Return value is divided by 100 to get two decimal points, + unit is in Amps. A negative value indicates that the hardware current capacity is unknown (it + will always be unknown for custom groups)." + ::= { pdu3GroupEntry 11 } + +pdu3GroupCurrent OBJECT-TYPE + SYNTAX INTEGER -- Units 0.01 A + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A group current measurement value. Return value is divided by 100 to get two decimal points." + ::= { pdu3GroupEntry 12 } + +pdu3GroupCurrentThStatus OBJECT-TYPE + SYNTAX INTEGER { + good (1), + lowWarning (2), + lowCritical (3), + highWarning (4), + highCritical (5) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Status of the measured group current relative to the configured thresholds." + ::= { pdu3GroupEntry 13 } + +pdu3GroupCurrentThLowerWarning OBJECT-TYPE + SYNTAX INTEGER (-1..100000) -- Units 0.01 A + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Lower warning threshold. Return value is divided by 100 to get two decimal points. A negative value indicates + that this object is not available." + ::= { pdu3GroupEntry 14 } + +pdu3GroupCurrentThLowerCritical OBJECT-TYPE + SYNTAX INTEGER (-1..100000) -- Units 0.01 A + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Lower critical threshold. Return value is divided by 100 to get two decimal points. A negative value indicates + that this object is not available." + ::= { pdu3GroupEntry 15 } + +pdu3GroupCurrentThUpperWarning OBJECT-TYPE + SYNTAX INTEGER (-1..100000) -- Units 0.01 A + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Upper warning threshold. Return value is divided by 100 to get two decimal points. A negative value indicates + that this object is not available." + ::= { pdu3GroupEntry 16 } + +pdu3GroupCurrentThUpperCritical OBJECT-TYPE + SYNTAX INTEGER (-1..100000) -- Units 0.01 A + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Upper critical threshold. Return value is divided by 100 to get two decimal points. A negative value indicates + that this object is not available." + ::= { pdu3GroupEntry 17 } + + +pdu3GroupCurrentPercentLoad OBJECT-TYPE + SYNTAX INTEGER -- Units 0.1 % + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Current percent load, based on the rated current capacity. Units are + percentage, for example 80.9 % will be returned as 809. A negative + value indicates that this object is not available." + ::= { pdu3GroupEntry 18 } + +pdu3GroupPowerVA OBJECT-TYPE + SYNTAX INTEGER -- units in VA + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A group VA value. Units are VA. A negative value indicates + that this object is not available." + ::= { pdu3GroupEntry 19 } + +pdu3GroupPowerWatts OBJECT-TYPE + SYNTAX INTEGER -- units in Watt + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A group power value. Units are Watts. A negative value indicates + that this object is not available." + ::= { pdu3GroupEntry 20 } + +pdu3GroupPowerWattHour OBJECT-TYPE + SYNTAX INTEGER -- Units in kWh + ACCESS read-only + STATUS mandatory + DESCRIPTION + "An energy consumption value for each load segment. Units are kWh. This value can be reset to 0 + using GUI. In that case, the pdu3GroupPowerWattHourTimer will be reset as well. + A negative value indicates that this object is not available." + ::= { pdu3GroupEntry 21 } + +pdu3GroupPowerWattHourTimer OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..22)) -- display Date and Time stamp + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Timestamp when group kilo Watt-hours (group kWh) is reset." + ::= { pdu3GroupEntry 22 } + +pdu3GroupPowerFactor OBJECT-TYPE + SYNTAX INTEGER -- Value is in 0.01 + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A group PF value. Return value is divided by 100, for example a power factor of 0.95 would be returned as 95. + A negative value indicates that this object is not available." + ::= { pdu3GroupEntry 23 } + +pdu3GroupPowerVAR OBJECT-TYPE + SYNTAX INTEGER -- Units in VAR + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A measurement for group/load segment power reactive. Units are VAR. A negative value indicates + that this object is not available." + ::= { pdu3GroupEntry 24 } + +pdu3GroupOutletCount OBJECT-TYPE + SYNTAX INTEGER (0..63) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of outlets in each group (breaker)." + ::= { pdu3GroupEntry 25 } + +pdu3GroupBreakerStatus OBJECT-TYPE + SYNTAX INTEGER { + notApplicable (1), + breakerOn (2), + breakerOff (3) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Only applicable to groups with breaker. Indicates whether a breaker is turned + off or on." + ::= { pdu3GroupEntry 26 } + +-- ==================================================================================== +-- +-- pdu3 OBJECT IDENTIFIER ::= {cpqPower 11} +-- pdu3Environment OBJECT IDENTIFIER ::= { pdu3 4 } +-- PDU3 Environment group +-- OID= .1.3.6.1.4.1.232.165.11.4 + +pdu3EnvProbeTable OBJECT-TYPE + SYNTAX SEQUENCE OF Pdu3EnvProbeEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A list of environment probe (1 per PDU) for temperature, humidity, and contacts. + The number of entries is given by number of PDUs in daisy chain." + ::= { pdu3Environment 1 } + +pdu3EnvProbeEntry OBJECT-TYPE + SYNTAX Pdu3EnvProbeEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Aggregate entries equal to number of PDUs." + INDEX { pdu3IdentIndex } + ::= { pdu3EnvProbeTable 1 } + +Pdu3EnvProbeEntry ::= SEQUENCE { + pdu3TemperatureScale INTEGER, + pdu3TemperatureCount INTEGER, + pdu3HumidityCount INTEGER, + pdu3ContactCount INTEGER +} + +pdu3TemperatureScale OBJECT-TYPE + SYNTAX INTEGER { + celsius (1), + fahrenheit (2) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Scale used to return temperature objects." + ::= { pdu3EnvProbeEntry 1 } + +pdu3TemperatureCount OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Max number of temperature measurements (1 per probe)." + ::= { pdu3EnvProbeEntry 2 } + +pdu3HumidityCount OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Max number of humidity measurements (1 per probe)." + ::= { pdu3EnvProbeEntry 3 } + +pdu3ContactCount OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Max number of contact sensors (1 per probe)." + ::= { pdu3EnvProbeEntry 4 } + +-- ========Temperature Measurements ============ + +pdu3TemperatureTable OBJECT-TYPE + SYNTAX SEQUENCE OF Pdu3TemperatureEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A list of temperature probe measurements. The number of entries are + given by number of pdu and pdu3TemperatureCount." + ::= { pdu3Environment 2 } + +pdu3TemperatureEntry OBJECT-TYPE + SYNTAX Pdu3TemperatureEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "An entry for a temperature measurement." + INDEX { pdu3IdentIndex, pdu3TemperatureIndex } + ::= { pdu3TemperatureTable 1 } + +Pdu3TemperatureEntry ::= SEQUENCE { + pdu3TemperatureIndex INTEGER, + pdu3TemperatureName DisplayString, + pdu3TemperatureProbeStatus INTEGER, + pdu3TemperatureValue INTEGER, + pdu3TemperatureThStatus INTEGER, + pdu3TemperatureThLowerWarning INTEGER, + pdu3TemperatureThLowerCritical INTEGER, + pdu3TemperatureThUpperWarning INTEGER, + pdu3TemperatureThUpperCritical INTEGER +} + +pdu3TemperatureIndex OBJECT-TYPE + SYNTAX INTEGER (1..2) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A unique value for each temperature probe measurement. Its value + ranges from 1 to temperatureCount." + ::= { pdu3TemperatureEntry 1 } + +pdu3TemperatureName OBJECT-TYPE + SYNTAX DisplayString (SIZE(1..31)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A descriptive name for the temperature probe." + ::= { pdu3TemperatureEntry 2 } + +pdu3TemperatureProbeStatus OBJECT-TYPE + SYNTAX INTEGER { + disconnected (1), + connected (2), + bad (3) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates whether a probe is connected or not." + ::= { pdu3TemperatureEntry 3 } + +pdu3TemperatureValue OBJECT-TYPE + SYNTAX INTEGER --0.1 Fahrenheit or Celsius + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Units are in tenths of a degree (either Fahrenheit or Celsius). + Return value is divided by 10 to get degrees." + ::= { pdu3TemperatureEntry 4 } + +pdu3TemperatureThStatus OBJECT-TYPE + SYNTAX INTEGER { + good (1), + lowWarning (2), + lowCritical (3), + highWarning (4), + highCritical (5) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Status of the measured temperature relative to the configured thresholds." + ::= { pdu3TemperatureEntry 5 } + +pdu3TemperatureThLowerWarning OBJECT-TYPE + SYNTAX INTEGER (-1..150000) -- 0.1 of a degree + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Lower warning threshold. Return value is divided by 10 to get degree. A negative value + indicates that this object is not available." + ::= { pdu3TemperatureEntry 6 } + +pdu3TemperatureThLowerCritical OBJECT-TYPE + SYNTAX INTEGER (-1..150000) -- 0.1 of a degree + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Lower critical threshold. Return value is divided by 10 to get degree. A negative value + indicates that this object is not available." + ::= { pdu3TemperatureEntry 7 } + +pdu3TemperatureThUpperWarning OBJECT-TYPE + SYNTAX INTEGER (-1..150000) -- 0.1 of a degree + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Upper warning threshold. Return value is divided by 10 to get degree. A negative value + indicates that this object is not available." + ::= { pdu3TemperatureEntry 8 } + +pdu3TemperatureThUpperCritical OBJECT-TYPE + SYNTAX INTEGER (-1..150000) -- 0.1 of a degree + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Upper critical threshold. Return value is divided by 10 to get degree. A negative value + indicates that this object is not available." + ::= { pdu3TemperatureEntry 9 } + +-- ==========Humidity Measurements ========== + +pdu3HumidityTable OBJECT-TYPE + SYNTAX SEQUENCE OF Pdu3HumidityEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A list of humidity probe measurements. The number of entries are + given by number of pdu and pdu3HumidityCount." + ::= { pdu3Environment 3 } + +pdu3HumidityEntry OBJECT-TYPE + SYNTAX Pdu3HumidityEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "An entry for a humidity measurement." + INDEX { pdu3IdentIndex, pdu3HumidityIndex } + ::= { pdu3HumidityTable 1 } + +Pdu3HumidityEntry ::= SEQUENCE { + pdu3HumidityIndex INTEGER, + pdu3HumidityName DisplayString, + pdu3HumidityProbeStatus INTEGER, + pdu3HumidityValue INTEGER, + pdu3HumidityThStatus INTEGER, + pdu3HumidityThLowerWarning INTEGER, + pdu3HumidityThLowerCritical INTEGER, + pdu3HumidityThUpperWarning INTEGER, + pdu3HumidityThUpperCritical INTEGER +} + +pdu3HumidityIndex OBJECT-TYPE + SYNTAX INTEGER (1..2) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A unique value for each humidity probe measurement. Its value + ranges from 1 to pdu3HumidityCount per pdu." + ::= { pdu3HumidityEntry 1 } + +pdu3HumidityName OBJECT-TYPE + SYNTAX DisplayString (SIZE(1..31)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A descriptive name for the humidity probe." + ::= { pdu3HumidityEntry 2 } + +pdu3HumidityProbeStatus OBJECT-TYPE + SYNTAX INTEGER { + disconnected (1), + connected (2), + bad (3) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates whether a probe is connected or not." + ::= { pdu3HumidityEntry 3 } + +pdu3HumidityValue OBJECT-TYPE + SYNTAX INTEGER -- 0.1 of %RH + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Units are tenths of a percent relative humidity. Return value is divided by 10 to get %RH." + ::= { pdu3HumidityEntry 4 } + +pdu3HumidityThStatus OBJECT-TYPE + SYNTAX INTEGER { + good (1), + lowWarning (2), + lowCritical (3), + highWarning (4), + highCritical (5) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Status of the measured humidity relative to the configured thresholds." + ::= { pdu3HumidityEntry 5 } + +pdu3HumidityThLowerWarning OBJECT-TYPE + SYNTAX INTEGER (-1..1000) -- 0.1 of %RH + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Lower warning threshold. Return value is divided by 10 to get %RH. A negative value + indicates that this object is not available." + ::= { pdu3HumidityEntry 6 } + +pdu3HumidityThLowerCritical OBJECT-TYPE + SYNTAX INTEGER (-1..1000) -- 0.1 of %RH + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Lower critical threshold. Return value is divided by 10 to get %RH. A negative value + indicates that this object is not available." + ::= { pdu3HumidityEntry 7 } + +pdu3HumidityThUpperWarning OBJECT-TYPE + SYNTAX INTEGER (-1..1000) -- 0.1 of %RH + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Upper warning threshold. Return value is divided by 10 to get %RH. A negative value + indicates that this object is not available." + ::= { pdu3HumidityEntry 8 } + +pdu3HumidityThUpperCritical OBJECT-TYPE + SYNTAX INTEGER (-1..1000) -- 0.1 of %RH + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Upper critical threshold. Return value is divided by 10 to get %RH. A negative value + indicates that this object is not available." + ::= { pdu3HumidityEntry 9 } + +-- ======Dry Contacts Status========== + +pdu3ContactTable OBJECT-TYPE + SYNTAX SEQUENCE OF Pdu3ContactEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A list of contact sensors. The number of entries are + given by number of pdu and pdu3ContactCount." + ::= { pdu3Environment 4 } + +pdu3ContactEntry OBJECT-TYPE + SYNTAX Pdu3ContactEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "An entry for a contact sensor" + INDEX { pdu3IdentIndex, pdu3ContactIndex } + ::= { pdu3ContactTable 1 } + +Pdu3ContactEntry ::= SEQUENCE { + pdu3ContactIndex INTEGER, + pdu3ContactName DisplayString, + pdu3ContactProbeStatus INTEGER, + pdu3ContactState INTEGER +} + +pdu3ContactIndex OBJECT-TYPE + SYNTAX INTEGER (1..3) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A unique value for each contact sensor. Its value ranges from 1 to + contactCount." + ::= { pdu3ContactEntry 1 } + +pdu3ContactName OBJECT-TYPE + SYNTAX DisplayString (SIZE(1..31)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A descriptive name for the contact sensor." + ::= { pdu3ContactEntry 2 } + +pdu3ContactProbeStatus OBJECT-TYPE + SYNTAX INTEGER { + disconnected (1), + connected (2), + bad (3) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates whether a probe is connected or not. + Will not be returned if the contact sensor is internal to the ePDU, + in that case only contactState should be read." + ::= { pdu3ContactEntry 3 } + +pdu3ContactState OBJECT-TYPE + SYNTAX INTEGER { + contactOpen (1), + contactClosed (2), + contactBad (3) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The state of the contact sensor." + ::= { pdu3ContactEntry 4 } + + +-- ==================================================================================== +-- +-- pdu3 OBJECT IDENTIFIER ::= {cpqPower 11} +-- pdu3Outlet OBJECT IDENTIFIER ::= { pdu3 5 } +-- PDU3 Outlet group +-- OID= .1.3.6.1.4.1.232.165.11.5 + +pdu3OutletTable OBJECT-TYPE + SYNTAX SEQUENCE OF Pdu3OutletEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Aggregate Object with number of entries equal to Number of PDU (pdu3IdentIndex) + and Number of outlet per PDU (pdu3OutletIndex)." + ::= { pdu3Outlet 1 } + +pdu3OutletEntry OBJECT-TYPE + SYNTAX Pdu3OutletEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "The Outlet table entry containing the type, voltage, current etc." + INDEX { pdu3IdentIndex, pdu3OutletIndex } + ::= { pdu3OutletTable 1 } + +Pdu3OutletEntry ::= SEQUENCE { + pdu3OutletIndex INTEGER, + pdu3OutletName DisplayString, + pdu3OutletType INTEGER, + pdu3OutletCurrentRating INTEGER, + pdu3OutletCurrent INTEGER, + pdu3OutletActivePowerThStatus INTEGER, + pdu3OutletActivePowerThLowerWarning INTEGER, + pdu3OutletActivePowerThLowerCritical INTEGER, + pdu3OutletActivePowerThUpperWarning INTEGER, + pdu3OutletActivePowerThUpperCritical INTEGER, + pdu3OutletCurrentPercentLoad INTEGER, + pdu3OutletVA INTEGER, + pdu3OutletWatts INTEGER, + pdu3OutletWh INTEGER, + pdu3OutletWhTimer DisplayString, + pdu3OutletPowerFactor INTEGER, + pdu3OutletVAR INTEGER +} + +pdu3OutletIndex OBJECT-TYPE + SYNTAX INTEGER (0..100) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Index for each outlet, value from 1 to the number of outlets per PDU." + ::= { pdu3OutletEntry 1 } + +pdu3OutletName OBJECT-TYPE + SYNTAX DisplayString (SIZE(1..31)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A descriptive name for the outlet." + ::= { pdu3OutletEntry 2 } + +pdu3OutletType OBJECT-TYPE + SYNTAX INTEGER { + iecC13 (1), + iecC19 (2), + uk (10), + french (11), + schuko (12), + nema515 (20), + nema51520 (21), + nema520 (22), + nemaL520 (23), + nemaL530 (24), + nema615 (25), + nema620 (26), + nemaL620 (27), + nemaL630 (28), + nemaL715 (29), + rf203p277 (30) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Type of this outlet - C13, C19." + ::= { pdu3OutletEntry 3 } + +pdu3OutletCurrentRating OBJECT-TYPE + SYNTAX INTEGER -- Units 0.01 A + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Rated current capacity of this outlet. Return value is divided by 100 to get amps. A negative + value indicates that the hardware current capacity is unknown." + ::= { pdu3OutletEntry 4 } + +pdu3OutletCurrent OBJECT-TYPE + SYNTAX INTEGER -- Units 0.01 A + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A outlet current measurement value. Return value is divided by 100 to get amps." + ::= { pdu3OutletEntry 5 } + +pdu3OutletActivePowerThStatus OBJECT-TYPE + SYNTAX INTEGER { + good (1), + lowWarning (2), + lowCritical (3), + highWarning (4), + highCritical (5) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Status of the measured outlet active power relative to the configured thresholds." + ::= { pdu3OutletEntry 6 } + +pdu3OutletActivePowerThLowerWarning OBJECT-TYPE + SYNTAX INTEGER (-1..10000) -- Units W + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Lower warning threshold. Units are Watts(W). A negative value indicates + that this object is not available." + ::= { pdu3OutletEntry 7 } + +pdu3OutletActivePowerThLowerCritical OBJECT-TYPE + SYNTAX INTEGER (-1..10000) -- Units W + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Lower critical threshold. Units are Watts(W). A negative value indicates + that this object is not available." + ::= { pdu3OutletEntry 8 } + +pdu3OutletActivePowerThUpperWarning OBJECT-TYPE + SYNTAX INTEGER (-1..10000) -- Units W + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Upper warning threshold. Units are Watts(W). A negative value indicates + that this object is not available." + ::= { pdu3OutletEntry 9 } + +pdu3OutletActivePowerThUpperCritical OBJECT-TYPE + SYNTAX INTEGER (-1..10000) -- Units W + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Upper critical threshold. Units are Watts(W). A negative value indicates + that this object is not available." + ::= { pdu3OutletEntry 10 } + + +pdu3OutletCurrentPercentLoad OBJECT-TYPE + SYNTAX INTEGER -- unit in 0.1 percentage + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Current percent load, based on the rated current capacity. Units are + percentage, for example 80.5% will be returned as 805. A negative + value indicates that this object is not available." + ::= { pdu3OutletEntry 11 } + +pdu3OutletVA OBJECT-TYPE + SYNTAX INTEGER -- units in VA + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A outlet power VA value. Units are VA. A negative value indicates + that this object is not available." + ::= { pdu3OutletEntry 12 } + +pdu3OutletWatts OBJECT-TYPE + SYNTAX INTEGER -- units in Watt + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A outlet power in Watts value. Units are Watts. A negative value indicates + that this object is not available." + ::= { pdu3OutletEntry 13 } + +pdu3OutletWh OBJECT-TYPE + SYNTAX INTEGER -- Units in kWatt-Hour + ACCESS read-only + STATUS mandatory + DESCRIPTION + "An energy in kWatt-Hour value for each outlet. Units are kWh. + This object is writable so that it can be reset to 0. When it is + written to, the pdu3OutletWhTimer will be reset updated as well + A negative value indicates that this object is not available." + ::= { pdu3OutletEntry 14 } + +pdu3OutletWhTimer OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..22)) -- display Date and Time stamp + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Timestamp (date and time) of outlet energy in kWh is reset." + ::= { pdu3OutletEntry 15 } + +pdu3OutletPowerFactor OBJECT-TYPE + SYNTAX INTEGER -- units are in 0.01 + ACCESS read-only + STATUS mandatory + DESCRIPTION + "An outlet PF value. Return value is divided by 100, for example a power factor + of 0.95 would be returned as 95. A negative value indicates that this object is not available." + ::= { pdu3OutletEntry 16 } + +pdu3OutletVAR OBJECT-TYPE + SYNTAX INTEGER -- Units in VAR + ACCESS read-only + STATUS mandatory + DESCRIPTION + "An outlet power reactive in VAR value. Units are VAR. A negative value indicates + that this object is not available." + ::= { pdu3OutletEntry 17 } + + + +-- ====================== PDU Outlet Control===================== + +pdu3OutletControlTable OBJECT-TYPE + SYNTAX SEQUENCE OF Pdu3OutletControlEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Aggregate Object with number of entries equal to Number of PDU (pdu3IdentIndex) + and Number of outlets per PDU (pdu3OutletIndex)." + ::= { pdu3Outlet 2 } + +pdu3OutletControlEntry OBJECT-TYPE + SYNTAX Pdu3OutletControlEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "The Outlet table entry containing the type, voltage, current etc." + INDEX { pdu3IdentIndex, pdu3OutletIndex } + ::= { pdu3OutletControlTable 1 } + +Pdu3OutletControlEntry ::= SEQUENCE { + + pdu3OutletControlStatus INTEGER, + pdu3OutletControlOffCmd INTEGER, + pdu3OutletControlOnCmd INTEGER, + pdu3OutletControlRebootCmd INTEGER, + pdu3OutletControlPowerOnState INTEGER, + pdu3OutletControlSequenceDelay INTEGER, + pdu3OutletControlRebootOffTime INTEGER, + pdu3OutletControlSwitchable INTEGER, + pdu3OutletControlShutoffDelay INTEGER +} + +pdu3OutletControlStatus OBJECT-TYPE + SYNTAX INTEGER { + off (1), + on (2), + pendingOff (3), + pendingOn (4) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "current state of a control outlet." + ::= { pdu3OutletControlEntry 1 } + +pdu3OutletControlOffCmd OBJECT-TYPE + SYNTAX INTEGER (-1..99999) + ACCESS read-write + STATUS mandatory + DESCRIPTION + "When write, once issued, the outlet will turn Off immediately. + 0-n: Time in seconds until the outlet command is issued + -1: Cancel a pending outlet Off command + When read, returns -1 if no command is pending, or the current downcount in + seconds of a pending command." + ::= { pdu3OutletControlEntry 2 } + +pdu3OutletControlOnCmd OBJECT-TYPE + SYNTAX INTEGER (-1..99999) + ACCESS read-write + STATUS mandatory + DESCRIPTION + "When write, once issued, the outlet will turn On immediately. + 0-n: Time in seconds until the outlet command is issued + -1: Cancel a pending outlet On command + When read, returns -1 if no command is pending, or the current downcount in + seconds of a pending command." + ::= { pdu3OutletControlEntry 3 } + +pdu3OutletControlRebootCmd OBJECT-TYPE + SYNTAX INTEGER (-1..99999) + ACCESS read-write + STATUS mandatory + DESCRIPTION + "When write, for outlets that are On prior to this Reboot command, they will + switch Off immediately when the command is issued, remain Off for + outletControlRebootOffTime seconds, and then turn back On. + For outlets that are Off prior to the Reboot command, they will turn On after + a delay of outletControlRebootOffTime seconds from when the command is issued. + 0-n : Time in seconds until the Reboot command is issued + -1 : Cancel a pending outlet Reboot command + + When read, returns -1 if no command is pending, or the current downcount in + seconds of a pending command." + ::= { pdu3OutletControlEntry 4 } + +pdu3OutletControlPowerOnState OBJECT-TYPE + SYNTAX INTEGER { + off (1), + on (2), + lastState (3) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Determines the outlet state when power is applied to the unit. + 1 : not restart at device startup + 2 : should sequence back ON in line with outletControlSequenceTime + 3 : should take the state the outlet had when power was lost. + If the state was ON, should sequence back ON in line with outletControlSequenceTime." + ::= { pdu3OutletControlEntry 5 } + +pdu3OutletControlSequenceDelay OBJECT-TYPE + SYNTAX INTEGER (-1..99999) + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Time delay in seconds from when a Global Sequence On command is issued to + when the command is executed on this outlet. This delay is also used as a power-on + delay. Set to -1 to exclude this outlet from Global Sequence On commands." + ::= { pdu3OutletControlEntry 6 } + +pdu3OutletControlRebootOffTime OBJECT-TYPE + SYNTAX INTEGER (-1..99999) + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Time delay in seconds that the outlet should remain in the Off state when executing a Reboot command." + ::= { pdu3OutletControlEntry 7 } + +pdu3OutletControlSwitchable OBJECT-TYPE + SYNTAX INTEGER { + switchable (1), + notSwitchable (2) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Determines the outlet capability to be controlled On/Off from the communication channels. + 1 : control On/Off enabled + 2 : control On/Off disabled." + ::= { pdu3OutletControlEntry 8 } + +pdu3OutletControlShutoffDelay OBJECT-TYPE + SYNTAX INTEGER (-1..99999) + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Time delay in seconds that could be taken in account before shutting of the outlet. + An application which need to shutoff properly an outlet will read this parameter first + then write it to the command pdu3OutletControlOffCmd." + ::= { pdu3OutletControlEntry 9 } + + + +-- ======================= +-- Device Traps +-- ======================= +trapCritical TRAP-TYPE + ENTERPRISE cpqPower + VARIABLES { sysName, + trapCode, + trapDescription, + trapDeviceName, + trapDeviceDetails, + trapDeviceMgmtUrl } + DESCRIPTION + "A critical alarm has occurred. Action: Check the Trap Details for more information." + --#TYPE "Critical Alarm" + --#SEVERITY CRITICAL + --#CATEGORY "PowerDevice" + --#SIMPLE_SEVERITY CRITICAL + --#HWSTATUS_CATEGORY POWER + --#SUMMARY " %s from %s %s " + --#ARGUMENTS {2, 3, 0} + + -- PDU Critical Alarm trap text: Description: + -- Voltage High Critical The PDU has detected an input line voltage that is more than 20% ABOVE the expected voltage + -- Voltage Low Critical The PDU has detected a very low input line voltage more than 20% BELOW the expected voltage, or the breaker may have tripped. + -- Load Critical The rated capacity of the breaker has been exceeded. There is a high risk of tripping the breaker + -- Current Critical Current has exceeded the breaker rating level. The addition of any new load could overload or trip the breaker + -- Total Power Critical The rated capacity of the PDU has been exceeded. There is a risk of tripping the branch circuit protection + -- Total Heat Critical The heat created by the load attached to this PDU has exceeded the set threshold + -- Total Load Critical The rated capacity of the PDU has been exceeded. There is a risk of tripping the branch circuit protection + + -- Breaker Critical A breaker is off. + -- Fan Critical A fan has failed. There are not enough fans to be able to maintain operating temperature. + -- Temperature Out of Range PDU operating temperature is out of range. + -- UPS Critical Alarm trap text: Description: + -- Agent(s) Not Connected Loss communication with remote shutdown agent(s) + -- Battery Failure ABM reports Battery failure + -- Battery Low Battery has reached its Low battery threshold + -- EPO Initiated A Remote Emergency-Power-Off initiated to shutdown UPS immediately. + -- Fan Failure The UPS's Fan Failure detected + -- Internal Failure An internal UPS circuit problem is detected + -- Loss of Redundant Communication Remote Agent lost communicating with one of the redudant UPSes + -- Manual Load Dumped UPS is switched off manually bys user + -- Overload UPS is overloaded + -- Temperature Out of Range UPS operating temperature is out of range + -- Charger Fault Battery Charger is failure (Offline UPS only) + -- DC Bus High/Low DC Bus voltage is out of range (Offline UPS only) + -- DC AUX Power Fault DC AUX Power circuit is failure (Offline UPS only) + -- AC AUX Power Fault AC AUX Power circuit is failure (Offline UPS only) + -- Output Fault Output Circuit is failure (Offline UPS only) + -- DC-DC Fault DC-to-DC is failure (Offline UPS only) + -- Output Short Output circuit is shorted (Offline UPS only) + -- Shutdown Imminent Battery is on too low capacity, UPS is shutdown soon (Offline UPS only) + -- Utility Failure Utility Power is lost (Offline UPS only) + -- BP Missing Missing Battery Pack (Offline UPS only) + -- DB Missing Missing IO Distribution Box (Offline UPS only) + -- No Battery Battery not detected (Offline UPS only) + + -- iPDU Critical Alarm trap text: Description: + -- Voltage High The voltage for the iPDU is above the warning or critical limit + -- Voltage Low The voltage for the iPDU is below the warning or critical limit + -- Total PDU Load The total load of the iPDU is above the warning or critical limit + -- Phase Load The phase load is above the warning or critical limit + -- Load Segment Current The current for the circuit breaker is above the warning or critical limit + -- Managed Ext. Bar Communication An Intelligent Extension Bar can no longer communicate with the iPDU + -- Display Communication The Display Module can no longer communicate with the iPDU + -- Redundant Communication The iPDU cannot communicate with the redundant PDU or there is a redundancy configuration error + -- Remote PDU IP Mismatch The redundant PDU is already configured for redundancy with another PDU + -- Remote Outlet Control Disabled The redundant PDU outlet control settings are disabled and will therefore not allow redundant management control of its outlets + -- PDU Communication The Primary iPDU cannot communicate with the Secondary iPDU + ::= 1 + +trapWarning TRAP-TYPE + ENTERPRISE cpqPower + VARIABLES { sysName, + trapCode, + trapDescription, + trapDeviceName, + trapDeviceDetails, + trapDeviceMgmtUrl } + DESCRIPTION + "A warning alarm has occurred. Action: Check the Trap Details for more information." + --#TYPE "Warning Alarm" + --#SEVERITY MINOR + --#CATEGORY "PowerDevice" + --#SIMPLE_SEVERITY MAJOR + --#HWSTATUS_CATEGORY POWER + --#SUMMARY " %s from %s %s " + --#ARGUMENTS {2, 3, 0} + + -- PDU Warning Alarm trap text Description: + -- Voltage High Warning The PDU has detected an input line voltage that is more than 10% ABOVE the expected voltage + -- Voltage Low Warning The PDU has detected an input line voltage that is more than 10% BELOW the expected voltage + -- Load Warning Load has reached the rating level for this breaker, the addition of any new load could overload or trip the breaker + -- Current Warning Current has reached the rating level for this breaker, the addition of any new load could overload or trip the breaker + -- Total Power Warning The rated capacity for PDU has reached rating level. There is a risk of tripping the branch circuit protection + -- Total Heat Warning The heat created by the load attached to this PDU has reached a threshold + -- Total Load Warning The rated capacity for PDU has reached the rating level. There is a risk of tripping the branch circuit protection + -- PDU Communication Lost Connection between the daisy-chained PDUs is lost. + -- Fan Warning A fan has failed. Redundant fans may be able to maintain operating temperature. + -- UPS Warning Alarm trap text Description: + -- Battery Discharged The UPS Batteries are completely discharged + -- Battery Disconnected The batteries are not conntected to the UPS + -- Bypass On Auto The UPS is operating on automatic Bypass + -- Bypass Not Available The UPS Bypass is not available due to a Battery test or internal failure + -- Input Out of Range Input voltage is over or under the operating ranges + -- Loss of Redundant Power One of the redundant UPS is switched off + -- On Battery The UPS is operating on-Battery + -- Shutdown Pending The UPS is about to shutdown soon + -- Site Wiring Fault There is a fault in the input wiring other than Phase Rotation + -- Input Frequency NOK Input Frequency is out of range (Offline UPS only) + + + -- iPDU Warning Alarm trap text Description: + -- Topology Discovery An outlet device on an Intelligent Extension Bar can no longer communicate with the iPDU + -- Remote PDU Model Mismatch The two PDUs configured for redundancy management are different PDU models + ::= 2 + +trapInformation TRAP-TYPE + ENTERPRISE cpqPower + VARIABLES { sysName, + trapCode, + trapDescription, + trapDeviceName, + trapDeviceDetails, + trapDeviceMgmtUrl } + DESCRIPTION + "An informational alarm has occurred. Action: Check the Trap Details for more information." + --#TYPE "Information Alarm" + --#SEVERITY INFORMATIONAL + --#CATEGORY "PowerDevice" + --#SIMPLE_SEVERITY OK + --#HWSTATUS_CATEGORY POWER + --#SUMMARY " %s from %s %s " + --#ARGUMENTS {2, 3, 0} + + -- PDU Informational Alarm trap text Description: + -- (none) (none) + + -- UPS Informational Alarm trap text Description: + -- On Boost Input voltage low, UPS is boosting to keep output voltage at normal level + -- On Buck Input voltage is high, UPS is reducing to keep output voltage at normal level + -- UPS Started On Battery UPS started on battery, there is no utility input. + -- ACC Active Active Current Correction mode is active (Offline UPS only) + + -- iPDU Information Alarm trap text Description: + -- Managed Ext. Bar Connected iPDU detects an Extension Bar connected + -- Managed Ext. Bar Disconnected iPDU detects an Extension Bar disconnected + -- Display Connected iPDU detects the Display Module connected + -- Display Disconnected iPDU detects the Display Module disconnected + -- Discovery Capable Device Connected iPDU detects an IPD capable device was connected + -- Discovery Capable Device Disconnected iPDU detects an IPD capable device was disconnected + -- Secondary PDU Connected The first iDPU detects the second iPDU connected + -- Secondary PDU Disconnected The first iPDU detects the second iPDU disconnected + ::= 3 + +trapCleared TRAP-TYPE + ENTERPRISE cpqPower + VARIABLES { sysName, + trapCode, + trapDescription, + trapDeviceName, + trapDeviceDetails, + trapDeviceMgmtUrl } + DESCRIPTION + "An alarm has cleared. Action: Check the Trap Details for more information." + --#TYPE "Cleared Alarm" + --#SEVERITY INFORMATIONAL + --#CATEGORY "PowerDevice" + --#SIMPLE_SEVERITY OK + --#HWSTATUS_CATEGORY POWER + --#SUMMARY " %s from %s %s " + --#ARGUMENTS {2, 3, 0} + ::= 4 + +trapTest TRAP-TYPE + ENTERPRISE cpqPower + VARIABLES { sysName, + trapCode, + trapDescription, + trapDeviceName, + trapDeviceDetails, + trapDeviceMgmtUrl } + DESCRIPTION + "Test trap sent to a trap receiver to check proper reception of traps" + --#TYPE "Test Trap" + --#SEVERITY INFORMATIONAL + --#CATEGORY "PowerDevice" + --#SIMPLE_SEVERITY OK + --#HWSTATUS_CATEGORY POWER + --#SUMMARY " %s from %s %s " + --#ARGUMENTS {2, 3, 0} + ::= 5 + +deviceTrapInitialization TRAP-TYPE + ENTERPRISE cpqPower + VARIABLES { sysName, deviceIdentName } + DESCRIPTION + "This trap is sent each time a power device is initialized." + --#TYPE "Device Initialization" + --#SEVERITY INFORMATIONAL + --#CATEGORY "PowerDevice" + ::= 6 + + +END -- cgit v1.2.3