From 98a672123c7872f6b9b75a9a2b6bb3aea504de6a Mon Sep 17 00:00:00 2001 From: David Leutgeb Date: Tue, 5 Dec 2023 12:25:34 +0100 Subject: Initial commit --- MIBS/hp/BLADETYPE2-TRAP-MIB | 435 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 435 insertions(+) create mode 100644 MIBS/hp/BLADETYPE2-TRAP-MIB (limited to 'MIBS/hp/BLADETYPE2-TRAP-MIB') diff --git a/MIBS/hp/BLADETYPE2-TRAP-MIB b/MIBS/hp/BLADETYPE2-TRAP-MIB new file mode 100644 index 0000000..dd56abb --- /dev/null +++ b/MIBS/hp/BLADETYPE2-TRAP-MIB @@ -0,0 +1,435 @@ +-- COPYRIGHT NOTICE +-- Copyright (c) Hewlett Packard Company, 2003 +-- All rights reserved +-- +-- + +BLADETYPE2-TRAP-MIB DEFINITIONS ::= BEGIN + +IMPORTS + TRAP-TYPE + FROM RFC-1215 + sysName, sysLocation, sysContact, DisplayString + FROM RFC1213-MIB + hpSwitchBladeType2-Mgmt + FROM HP-SWITCH-PL-MIB + stgCurCfgIndex + FROM BLADETYPE2-PHYSICAL-MIB + agSlotNumber, agRackId, agChassis + FROM BLADETYPE2-SWITCH-MIB + ipCurCfgGwIndex, ipCurCfgGwAddr + , vrrpCurCfgVirtRtrIndx, vrrpCurCfgVirtRtrAddr, + vrrpCurCfgIfIndx, vrrpCurCfgIfPasswd + FROM BLADETYPE2-NETWORK-MIB; + +bt2Traps OBJECT IDENTIFIER + ::= { hpSwitchBladeType2-Mgmt 7 } + +-- MIB_INSERT_START +-- ---------------------------------------------------------------------------- +-- { INSERT: bt2trap +-- ---------------------------------------------------------------------------- + +-- SECTION 2: Temporary Object Definitions Used In Traps + +bt2SwTrapDisplayString OBJECT-TYPE + SYNTAX DisplayString (SIZE(0..255)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Temporary string object used to store information being sent + in an Bladetype2 Switch trap." + ::= { bt2Traps 1000 } + +-- SECTION 3: Trap Definitions + +bt2SwPrimaryPowerSupplyFailure TRAP-TYPE + ENTERPRISE bt2Traps + DESCRIPTION + "A bt2SwPrimaryPowerSupplyFailure trap signifies that the + primary power supply failed." + + --#SEVERITY CRITICAL + + ::= 1 -- 0x01 + +bt2SwDefGwUp TRAP-TYPE + ENTERPRISE bt2Traps + VARIABLES { ipCurCfgGwIndex, + ipCurCfgGwAddr, + sysName, sysLocation, sysContact } + DESCRIPTION + "A bt2SwDefGwUp trap signifies that the default + gateway is alive." + + --#SEVERITY INFORMATIONAL + + ::= 2 -- 0x02 + +bt2SwDefGwDown TRAP-TYPE + ENTERPRISE bt2Traps + VARIABLES { ipCurCfgGwIndex, + ipCurCfgGwAddr, + sysName, sysLocation, sysContact } + DESCRIPTION + "A bt2SwDefGwDown trap signifies that the default + gateway is down." + + --#SEVERITY INFORMATIONAL + + ::= 3 -- 0x03 + +bt2SwDefGwInService TRAP-TYPE + ENTERPRISE bt2Traps + VARIABLES { ipCurCfgGwIndex, + ipCurCfgGwAddr, + sysName, sysLocation, sysContact } + DESCRIPTION + "A bt2SwDefGwEnabled trap signifies that the default + gateway is up and in service." + + --#SEVERITY INFORMATIONAL + + ::= 4 -- 0x04 + +bt2SwDefGwNotInService TRAP-TYPE + ENTERPRISE bt2Traps + VARIABLES { ipCurCfgGwIndex, + ipCurCfgGwAddr, + sysName, sysLocation, sysContact } + DESCRIPTION + "A bt2SwDefGwDisabled trap signifies that the default + gateway is alive but not in service." + + --#SEVERITY INFORMATIONAL + + ::= 5 -- 0x05 + + +bt2SwVrrpNewMaster TRAP-TYPE + ENTERPRISE bt2Traps + VARIABLES { vrrpCurCfgVirtRtrIndx, + vrrpCurCfgVirtRtrAddr, + sysName, sysLocation, sysContact } + DESCRIPTION + "The bt2SwVrrpNewMaster trap indicates that the sending agent + has transitioned to 'Master' state." + + --#SEVERITY INFORMATIONAL + + ::= 16 -- 0x10 + +bt2SwVrrpNewBackup TRAP-TYPE + ENTERPRISE bt2Traps + VARIABLES { vrrpCurCfgVirtRtrIndx, + vrrpCurCfgVirtRtrAddr, + sysName, sysLocation, sysContact } + DESCRIPTION + "The bt2SwVrrpNewBackup trap indicates that the sending agent + has transitioned to 'Backup' state." + + --#SEVERITY INFORMATIONAL + + ::= 17 -- 0x11 + +bt2SwVrrpAuthFailure TRAP-TYPE + ENTERPRISE bt2Traps + VARIABLES { vrrpCurCfgIfIndx, + vrrpCurCfgIfPasswd, + sysName, sysLocation, sysContact } + DESCRIPTION + "A bt2SwVrrpAuthFailure trap signifies that a packet has + been received from a router whose authentication key + or authentication type conflicts with this router's + authentication key or authentication type. Implementation + of this trap is optional." + + --#SEVERITY MAJOR + + ::= 18 -- 0x12 + +bt2SwLoginFailure TRAP-TYPE + ENTERPRISE bt2Traps + VARIABLES { bt2SwTrapDisplayString, + sysName, sysLocation, sysContact } + DESCRIPTION + "A bt2SwLoginFailure trap signifies that someone failed to + enter a valid username/password combination." + --#SEVERITY MAJOR + + ::= 19 -- 0x13 +bt2SwTempExceedThreshold TRAP-TYPE + ENTERPRISE bt2Traps + VARIABLES { bt2SwTrapDisplayString, + sysName, sysLocation, sysContact } + DESCRIPTION + "A bt2SwTempExceedThreshold trap signifies that the + switch temperature has exceeded maximum safety limits." + --#SEVERITY CRITICAL + + ::= 22 -- 0x16 + +bt2SwRackLocationChange TRAP-TYPE + ENTERPRISE bt2Traps + VARIABLES { agRackId, + agChassis, + agSlotNumber, + sysName, sysLocation, sysContact } + DESCRIPTION + "A bt2SwRackLocationChange trap signifies that the rack + location has been changed." + + --#SEVERITY INFORMATIONAL + + ::= 26 -- 0x1A + +bt2SwApplyComplete TRAP-TYPE + ENTERPRISE bt2Traps + VARIABLES { bt2SwTrapDisplayString, + sysName, sysLocation, sysContact } + DESCRIPTION + "A bt2SwApplyComplete signifies that new configuration + has been applied." + --#SEVERITY INFORMATIONAL + + ::= 27 -- 0x1B + +bt2SwSaveComplete TRAP-TYPE + ENTERPRISE bt2Traps + VARIABLES { bt2SwTrapDisplayString, + sysName, sysLocation, sysContact } + DESCRIPTION + "A bt2SwApplyComplete signifies that new configuration + has been saved." + --#SEVERITY INFORMATIONAL + + ::= 28 -- 0x1C + +bt2SwFwDownloadSucess TRAP-TYPE + ENTERPRISE bt2Traps + VARIABLES { bt2SwTrapDisplayString, + sysName, sysLocation, sysContact } + DESCRIPTION + "A bt2SwFwDownloadSuccess signifies that firmware + has been downloaded to [image1|image2|boot image]." + --#SEVERITY INFORMATIONAL + + ::= 29 -- 0x1D + +bt2SwFwDownloadFailure TRAP-TYPE + ENTERPRISE bt2Traps + VARIABLES { bt2SwTrapDisplayString, + sysName, sysLocation, sysContact } + DESCRIPTION + "A bt2SwFwDownloadFailure signifies that firmware + downloaded failed to [image1|image2|boot image]." + --#SEVERITY MINOR + + ::= 30 -- 0x1E + +bt2SwTempReturnThreshold TRAP-TYPE + ENTERPRISE bt2Traps + VARIABLES { bt2SwTrapDisplayString, + sysName, sysLocation, sysContact } + DESCRIPTION + "A bt2SwTempReturnThreshold trap signifies that the + switch temperature has returned below maximum safety limits." + --#SEVERITY INFORMATIONAL + + ::= 31 -- 0x1F + +bt2SwFanFailure TRAP-TYPE + ENTERPRISE bt2Traps + VARIABLES { bt2SwTrapDisplayString, + sysName, sysLocation, sysContact } + DESCRIPTION + "A bt2SwFanFailure trap signifies that the + fan failure has been detected." + + --#SEVERITY MAJOR + + ::= 32 -- 0x20 + +bt2SwFanFailureFixed TRAP-TYPE + ENTERPRISE bt2Traps + VARIABLES { bt2SwTrapDisplayString, + sysName, sysLocation, sysContact } + DESCRIPTION + "A bt2SwFanFailureFixed trap signifies that the + fan failure has been fixed." + + --#SEVERITY INFORMATIONAL + + ::= 33 -- 0x21 + +bt2SwUfdfoLtMFailure TRAP-TYPE + ENTERPRISE bt2Traps + VARIABLES { bt2SwTrapDisplayString, + sysName, sysLocation, sysContact } + DESCRIPTION + "A bt2SwUfdfoLtMFailure trap signifies that a LtM link is down." + --#SEVERITY MAJOR + + ::= 34 -- 0x22 + +bt2SwUfdfoLtMUP TRAP-TYPE + ENTERPRISE bt2Traps + VARIABLES { bt2SwTrapDisplayString, + sysName, sysLocation, sysContact } + DESCRIPTION + "A bt2SwUfdfoLtMUP trap signifies that a LtM link is up." + --#SEVERITY INFORMATIONAL + + ::= 35 -- 0x23 + +bt2SwUfdfoGlobalEna TRAP-TYPE + ENTERPRISE bt2Traps + VARIABLES { bt2SwTrapDisplayString, + sysName, sysLocation, sysContact } + DESCRIPTION + "A bt2SwUfdfoGlobalEna trap signifies that Global UFD is enabled." + --#SEVERITY INFORMATIONAL + + ::= 36 -- 0x24 + +bt2SwUfdfoGlobalDis TRAP-TYPE + ENTERPRISE bt2Traps + VARIABLES { bt2SwTrapDisplayString, + sysName, sysLocation, sysContact } + DESCRIPTION + "A bt2SwUfdfoGlobalDis trap signifies that Global UFD is disabled." + --#SEVERITY INFORMATIONAL + + ::= 37 -- 0x25 + + +bt2SwUfdfoLtDAutoEna TRAP-TYPE + ENTERPRISE bt2Traps + VARIABLES { bt2SwTrapDisplayString, + sysName, sysLocation, sysContact } + DESCRIPTION + "A bt2SwUfdfoLtDAutoEna trap signifies that a LtD link is Auto Enabled." + --#SEVERITY INFORMATIONAL + + ::= 38 -- 0x26 + + +bt2SwUfdfoLtDAutoDis TRAP-TYPE + ENTERPRISE bt2Traps + VARIABLES { bt2SwTrapDisplayString, + sysName, sysLocation, sysContact } + DESCRIPTION + "A bt2SwUfdfoLtDAutoDis trap signifies that a LtD link is Auto Disabled." + --#SEVERITY INFORMATIONAL + + ::= 39 -- 0x27 + +bt2SwCubeInserted TRAP-TYPE + ENTERPRISE bt2Traps + VARIABLES { bt2SwTrapDisplayString, + sysName, sysLocation, sysContact } + DESCRIPTION + "A Cube was inserted." + + --#SEVERITY INFORMATIONAL + + ::= 40 -- 0x28 + +bt2SwCubeRemoved TRAP-TYPE + ENTERPRISE bt2Traps + VARIABLES { bt2SwTrapDisplayString, + sysName, sysLocation, sysContact } + DESCRIPTION + "A Cube was removed." + + --#SEVERITY INFORMATIONAL + + ::= 41 -- 0x29 + +bt2SwStgNewRoot TRAP-TYPE + ENTERPRISE bt2Traps + VARIABLES { bt2SwTrapDisplayString, stgCurCfgIndex, + sysName, sysLocation, sysContact } + DESCRIPTION + "A bt2SwStgNewRoot trap signifies that the bridge has become the new root of the STG." + --#SEVERITY INFORMATIONAL + + ::= 42 -- 0x2A + +bt2SwCistNewRoot TRAP-TYPE + ENTERPRISE bt2Traps + VARIABLES { bt2SwTrapDisplayString, + sysName, sysLocation, sysContact } + DESCRIPTION + "A bt2SwCistNewRoot trap signifies that the bridge has become the new root of the CIST." + --#SEVERITY INFORMATIONAL + + ::= 43 -- 0x2B + +bt2SwStgTopologyChanged TRAP-TYPE + ENTERPRISE bt2Traps + VARIABLES { bt2SwTrapDisplayString, stgCurCfgIndex, + sysName, sysLocation, sysContact } + DESCRIPTION + "A bt2SwStgTopologyChanged trap signifies that there was a STG topology change." + --#SEVERITY INFORMATIONAL + + ::= 44 -- 0x2C + +bt2SwCistTopologyChanged TRAP-TYPE + ENTERPRISE bt2Traps + VARIABLES { bt2SwTrapDisplayString, + sysName, sysLocation, sysContact } + DESCRIPTION + "A bt2SwCistTopologyChanged trap signifies that there was a CIST topology change." + --#SEVERITY INFORMATIONAL + + ::= 45 -- 0x2D + + +bt2SwHotlinksMasterUp TRAP-TYPE + ENTERPRISE bt2Traps + VARIABLES { bt2SwTrapDisplayString, + sysName, sysLocation, sysContact } + DESCRIPTION "A bt2SwHotlinksMasterUp trap signifies that the Master interface is active." + --#SEVERITY INFORMATIONAL + ::= 46 -- 0x2E + +bt2SwHotlinksMasterDn TRAP-TYPE + ENTERPRISE bt2Traps + VARIABLES { bt2SwTrapDisplayString, + sysName, sysLocation, sysContact } + DESCRIPTION "A bt2SwHotlinksMasterDn trap signifies that the Master interface is not active." + --#SEVERITY INFORMATIONAL + ::= 47 -- 0x2F + +bt2SwHotlinksBackupUp TRAP-TYPE + ENTERPRISE bt2Traps + VARIABLES { bt2SwTrapDisplayString, + sysName, sysLocation, sysContact } + DESCRIPTION "A bt2SwHotlinksBackupUp trap signifies that the Backup interface is active." + --#SEVERITY INFORMATIONAL + ::= 48 -- 0x30 + +bt2SwHotlinksBackupDn TRAP-TYPE + ENTERPRISE bt2Traps + VARIABLES { bt2SwTrapDisplayString, + sysName, sysLocation, sysContact } + DESCRIPTION "A bt2SwHotlinksBackupDn trap signifies that the Backup interface is not active." + --#SEVERITY INFORMATIONAL + ::= 49 -- 0x31 + +bt2SwHotlinksNone TRAP-TYPE + ENTERPRISE bt2Traps + VARIABLES { bt2SwTrapDisplayString, + sysName, sysLocation, sysContact } + DESCRIPTION "A bt2SwHotlinksNone trap signifies that there are no active interfaces." + --#SEVERITY INFORMATIONAL + ::= 50 -- 0x32 + + +-- ---------------------------------------------------------------------------- +-- } INSERT: bt2trap +-- ---------------------------------------------------------------------------- + +END -- cgit v1.2.3