From 98a672123c7872f6b9b75a9a2b6bb3aea504de6a Mon Sep 17 00:00:00 2001 From: David Leutgeb Date: Tue, 5 Dec 2023 12:25:34 +0100 Subject: Initial commit --- .../NSCRTV-HFCEMS-OPTICALTRANSMITTERDIRECTLY-MIB | 373 +++++++++++++++++++++ 1 file changed, 373 insertions(+) create mode 100644 MIBS/glassway/NSCRTV-HFCEMS-OPTICALTRANSMITTERDIRECTLY-MIB (limited to 'MIBS/glassway/NSCRTV-HFCEMS-OPTICALTRANSMITTERDIRECTLY-MIB') diff --git a/MIBS/glassway/NSCRTV-HFCEMS-OPTICALTRANSMITTERDIRECTLY-MIB b/MIBS/glassway/NSCRTV-HFCEMS-OPTICALTRANSMITTERDIRECTLY-MIB new file mode 100644 index 0000000..0ad569f --- /dev/null +++ b/MIBS/glassway/NSCRTV-HFCEMS-OPTICALTRANSMITTERDIRECTLY-MIB @@ -0,0 +1,373 @@ +NSCRTV-HFCEMS-OPTICALTRANSMITTERDIRECTLY-MIB DEFINITIONS ::= BEGIN +-- ***************************************************************************** +-- 附录H 直接调制光发射机MIB +-- ***************************************************************************** + +IMPORTS + OBJECT-TYPE + FROM RFC-1212 + DisplayString + FROM RFC1213-MIB + otdIdent + FROM NSCRTV-ROOT; + + otdVendorOID OBJECT-TYPE + SYNTAX OBJECT IDENTIFIER + ACCESS read-only + STATUS optional + DESCRIPTION + "此对象提供厂商对直接调制光发送机MIB的扩充，无扩充时此对象应指向直接调制光发送 + 机节点otdIdent。" + ::= { otdIdent 1 } + + otdSlotNumber OBJECT-TYPE + SYNTAX INTEGER ( 0..32767 ) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "下行光发送机数量或机架插槽数量。" + ::= { otdIdent 2 } + + otdOptDeviceTable OBJECT-TYPE + SYNTAX SEQUENCE OF OtdOptDeviceEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "下行光发送机信息表。" + ::= { otdIdent 3 } + + otdOptDeviceEntry OBJECT-TYPE + SYNTAX OtdOptDeviceEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "下行光发送机信息表目。" + INDEX { otdIndex } + ::= { otdOptDeviceTable 1 } + + OtdOptDeviceEntry ::= SEQUENCE + { + otdIndex + INTEGER, + otdLaserWavelength + DisplayString, + otdLaserType + DisplayString, + otdDriveLevel + INTEGER, + otdInputRFLevel + INTEGER, + otdInputRFAttenuationRange + INTEGER, + otdInputRFAttenuation + INTEGER, + otdLaserTemp + INTEGER, + otdLaserCurrent + INTEGER, + otdOpicalOutputPower + INTEGER, + otdTecCurrent + INTEGER, + otdAGCControl + INTEGER, + otdConfigurationDriveLevel + INTEGER, + otdConfigurationRFAttenuation + INTEGER, + otdConfigurationRFChannels + INTEGER + } + + + otdIndex OBJECT-TYPE + SYNTAX INTEGER ( 0..32767 ) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "下行光发送机索引,可以是光发送机编号或机架插槽号。" + ::= { otdOptDeviceEntry 1 } + + otdLaserWavelength OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "激光器波长。" + ::= { otdOptDeviceEntry 2 } + + otdLaserType OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS optional + DESCRIPTION + "激光器类型，有效值为unisolated FP, isolated FP, uncooled DFB, cooled DFB,ITU + 等。" + ::= { otdOptDeviceEntry 3 } + + otdDriveLevel OBJECT-TYPE + SYNTAX INTEGER (0..127 ) + ACCESS read-only + STATUS optional + DESCRIPTION + "光模块激励电平,单位为dBuV/ch。此对象要求在属性MIB中登记一个条目。" + ::= { otdOptDeviceEntry 4 } + + otdInputRFLevel OBJECT-TYPE + SYNTAX INTEGER (0..127 ) + ACCESS read-only + STATUS optional + DESCRIPTION + "输入射频信号电平,单位为dBuV/ch。此对象要求在属性MIB中登记一个条目。" + ::= { otdOptDeviceEntry 5 } + + otdInputRFAttenuationRange OBJECT-TYPE + SYNTAX INTEGER ( 0..32767 ) + ACCESS read-only + STATUS optional + DESCRIPTION + "输入射频信号衰减量范围,单位为0.1dB。" + ::= { otdOptDeviceEntry 6 } + + otdInputRFAttenuation OBJECT-TYPE + SYNTAX INTEGER ( -32768..32767 ) + ACCESS read-write + STATUS optional + DESCRIPTION + "输入射频信号衰减量,单位为0.1dB。" + ::= { otdOptDeviceEntry 7 } + + otdLaserTemp OBJECT-TYPE + SYNTAX INTEGER ( -32768..32767 ) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "激光器工作温度,单位为0.1摄氏度。此对象要求在属性MIB中登记一个条目。" + ::= { otdOptDeviceEntry 8 } + + otdLaserCurrent OBJECT-TYPE + SYNTAX INTEGER (-32768..32767 ) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "激光器工作电流,单位为0.1mA。此对象要求在属性MIB中登记一个条目。" + ::= { otdOptDeviceEntry 9 } + + otdOpicalOutputPower OBJECT-TYPE + SYNTAX INTEGER ( 0..32767 ) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "输出光功率,单位为0.1mW。此对象要求在属性MIB中登记一个条目。" + ::= { otdOptDeviceEntry 10 } + + otdTecCurrent OBJECT-TYPE + SYNTAX INTEGER ( -32768..32767 ) + ACCESS read-only + STATUS optional + DESCRIPTION + "激光器制冷电流,单位为0.01A。此对象要求在属性MIB中登记一个条目。" + ::= { otdOptDeviceEntry 11 } + + otdAGCControl OBJECT-TYPE + SYNTAX INTEGER {off(1),on(2)} + ACCESS read-write + STATUS optional + DESCRIPTION + "AGC控制使能。" + ::= { otdOptDeviceEntry 12 } + + otdConfigurationDriveLevel OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS optional + DESCRIPTION + "设定激光器RF驱动电平偏移量，单位为0.1dB。该参数仅在AGC模式为打开时起作用。 + 系统根据该设定自动调整RF增益（衰减），从而达到设定的激光器RF驱动电平偏移量。 + " + ::= { otdOptDeviceEntry 13 } + + otdConfigurationRFAttenuation OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS optional + DESCRIPTION + "设定激光器RF驱动信号增益（衰减）的偏移量，单位为0.1dB。该参数仅在AGC模式为 + 关闭时起作用（MGC）。系统根据该设定调整RF信道的增益（衰减），从而达到手动 + 控制激光器RF驱动电平的目的。" + ::= { otdOptDeviceEntry 14 } + + otdConfigurationRFChannels OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS optional + DESCRIPTION + "RF信号中输入的电视信号频道数。" + ::= { otdOptDeviceEntry 15 } + + otdFansNumber OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "表示内部散热风扇的数量，'0'表示设备不支持散热风扇的监测或没有散热风扇。" + ::= { otdIdent 4 } + + otdFansTable OBJECT-TYPE + SYNTAX SEQUENCE OF OtdFansEntry + ACCESS not-accessible + STATUS optional + DESCRIPTION + "散热风扇信息表。" + ::= { otdIdent 5 } + + otdFansEntry OBJECT-TYPE + SYNTAX OtdFansEntry + ACCESS not-accessible + STATUS optional + DESCRIPTION + "散热风扇信息表目。" + INDEX { otdFansIndex } + ::= { otdFansTable 1 } + + OtdFansEntry ::= SEQUENCE { + otdFansIndex + INTEGER, + otdFansState + INTEGER, + otdFansSpeed + INTEGER, + otdFansControl + INTEGER, + otdFansName + DisplayString + } + + + otdFansIndex OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS optional + DESCRIPTION + "散热风扇信息表索引。" + ::= { otdFansEntry 1 } + + otdFansState OBJECT-TYPE + SYNTAX INTEGER {normal (1), fault (2), off (3) } + ACCESS read-only + STATUS optional + DESCRIPTION + "散热风扇工作状态，normal 表示正常，fault表示失效，off表示关闭。此对象要求在离散属性MIB中登 + 记一个条目。" + ::= { otdFansEntry 2 } + + otdFansSpeed OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS optional + DESCRIPTION + "散热风扇工作时的转速，单位为转/分，不支持转速检测时可置为'0'。此对象要求在 + 离散属性MIB中登记一个条目。" + ::= { otdFansEntry 3 } + + otdFansControl OBJECT-TYPE + SYNTAX INTEGER { on(1), off(2) } + ACCESS read-write + STATUS optional + DESCRIPTION + "散热风扇工作控制。 " + ::= { otdFansEntry 4 } + + otdFansName OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS optional + DESCRIPTION + "散热风扇名称。" + ::= { otdFansEntry 5 } + +--* +--* 直流电源 +--* + otdNumberDCPowerSupply OBJECT-TYPE + SYNTAX INTEGER ( 0..16 ) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "直流电源数量，'0'表示应答器不支持此功能。" + ::= { otdIdent 6 } + + otdDCPowerSupplyMode OBJECT-TYPE + SYNTAX INTEGER { loadsharing(1), switchedredundant(2),alonesupply(3) } + ACCESS read-only + STATUS optional + DESCRIPTION + "供电电源工作模式。" + ::= { otdIdent 7 } + + otdDCPowerTable OBJECT-TYPE + SYNTAX SEQUENCE OF OtdDCPowerEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "直流电源信息表。" + ::= { otdIdent 8 } + + otdDCPowerEntry OBJECT-TYPE + SYNTAX OtdDCPowerEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "直流电源信息表目。" + INDEX { otdDCPowerIndex } + ::= { otdDCPowerTable 1 } + + OtdDCPowerEntry ::= SEQUENCE + { + otdDCPowerIndex + INTEGER, + otdDCPowerVoltage + INTEGER, + otdDCPowerCurrent + INTEGER, + otdDCPowerName + DisplayString + } + + otdDCPowerIndex OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "直流电源索引。" + ::= { otdDCPowerEntry 1 } + + otdDCPowerVoltage OBJECT-TYPE + SYNTAX INTEGER (-32768..32767 ) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "电源电压，单位为0.1V。此对象要求在属性MIB中登记一个条目。" + ::= { otdDCPowerEntry 2 } + + otdDCPowerCurrent OBJECT-TYPE + SYNTAX INTEGER ( 0..65535 ) + ACCESS read-only + STATUS optional + DESCRIPTION + "电源电流，单位为0.1A。此对象要求在属性MIB中登记一个条目。" + ::= { otdDCPowerEntry 3 } + + otdDCPowerName OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "标明电源的名称，例如：24V直流电源。 + 此字段值由用户规定，至少应标明工作电压并将多个电源相互区分开。 + 当表中的对象产生告警时，此对象名称应放进hfcAlarmEvent陷阱的alarmText对象里（见 + 附录D）。" + ::= { otdDCPowerEntry 4 } + +-- ***************************************************************************** +END \ No newline at end of file -- cgit v1.2.3