From 98a672123c7872f6b9b75a9a2b6bb3aea504de6a Mon Sep 17 00:00:00 2001 From: David Leutgeb Date: Tue, 5 Dec 2023 12:25:34 +0100 Subject: Initial commit --- MIBS/fs/GBNDeviceSWAPI-MIB | 3259 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 3259 insertions(+) create mode 100644 MIBS/fs/GBNDeviceSWAPI-MIB (limited to 'MIBS/fs/GBNDeviceSWAPI-MIB') diff --git a/MIBS/fs/GBNDeviceSWAPI-MIB b/MIBS/fs/GBNDeviceSWAPI-MIB new file mode 100644 index 0000000..d939dce --- /dev/null +++ b/MIBS/fs/GBNDeviceSWAPI-MIB @@ -0,0 +1,3259 @@ +------------------------------------------------------------------------------ +------------------------------------------------------------------------------ +------------------------------------------------------------------------------ +------------------------------------------------------------------------------ +-- +-- File : bcmSwapi.mib +-- +-- +-- Copyright (c) 1999 admin Systems, Inc. All Rights Reserved. +-- +-- Reproduction of this document is authorized on condition that this +-- copyright notice is included. This GBN CCD MIB Specification +-- embodies proprietary intellectual property of admin Systems (ADMIN). +-- ADMIN retains all title and ownership in the specification, including any +-- revisions. +-- +-- It is the intent of ADMIN to encourage the widespread use of this +-- specification in connection with the management of GBN products. +-- ADMIN grants vendor, end-users, and other interested parties a non-exclusive +-- license to use this specification in connection with the management of +-- GBN based products. +-- +-- This specification is supplied "AS IS", and ADMIN makes no +-- warranty, either express or implied, as to the use, operations, +-- condition, or performance of this specification. +-- +------------------------------------------------------------------------------ +------------------------------------------------------------------------------ +------------------------------------------------------------------------------ +------------------------------------------------------------------------------ +-- Groups in the ADMIN SWAPI MIB +-- +-- The following groups are supported for the ADMIN GBN Enterprise MIB: +-- +-- sRFC1573MIB Support for RFC1213 and RFC1573 +-- sRFC1493MIB Support for multiple SPT's +-- sRFC1757MIB Support for Stat's group only +-- sRFC2233MIB Support for the Mau Mib (AutoNeg) +-- sDot1QMIB Support for the 802.1Q Mib +-- sDot1XMIB Support for the 802.1X Mib +-- sDot1pMIB Support for the 802.1p Mib +-- sRFC1643MIB Support for the Ether like Interfaces Mib +-- sArch Support for Architecture +-- sChip Support for Switch (NOT Supported Yet) +-- +------------------------------------------------------------------------------ +------------------------------------------------------------------------------ +GBNDeviceSWAPI-MIB + + DEFINITIONS ::= BEGIN + + IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, + Counter32, Integer32, Unsigned32, TimeTicks, BITS, + Gauge32 + FROM SNMPv2-SMI + TEXTUAL-CONVENTION, TruthValue, MacAddress, RowStatus + FROM SNMPv2-TC + MODULE-COMPLIANCE, OBJECT-GROUP + FROM SNMPv2-CONF + DisplayString, PhysAddress FROM RFC1213-MIB + gbnDevice FROM ADMIN-MASTER-MIB + IANAifType FROM IANAifType-MIB; + + + bcmSwapi MODULE-IDENTITY + LAST-UPDATED "0105030000Z" -- May 03,2001 + ORGANIZATION "admin Systems, Inc." + CONTACT-INFO "admin E-mail: " + + DESCRIPTION "SWAPI for Switch End Driver + 100Mb/s and 1000Mb/s Management." + + REVISION "0105030000Z" -- May 03,2001 + DESCRIPTION "Updated to include support for 1000 Mb/sec + MAUs and flow control negotiation." + + ::= { gbnDevice 2 } + +--SMI BITS + -- + -- SWAPI MIB Extensions + -- + + sRFC1573MIB OBJECT IDENTIFIER ::= { bcmSwapi 2 } + sRFC1573Interfaces OBJECT IDENTIFIER ::= { sRFC1573MIB 3 } + + -- Bridge MIB starts at 17 + sRFC1493MIB OBJECT IDENTIFIER ::= { bcmSwapi 4 } + sDot1dBase OBJECT IDENTIFIER ::= { sRFC1493MIB 1 } + sDot1dStp OBJECT IDENTIFIER ::= { sRFC1493MIB 2 } + sDot1dTp OBJECT IDENTIFIER ::= { sRFC1493MIB 4 } + + -- RMON starts at MIB-II + sRFC1757MIB OBJECT IDENTIFIER ::= { bcmSwapi 5} + sRFC1757Statistics OBJECT IDENTIFIER ::= {sRFC1757MIB 1 } + + sRFC2239MIB OBJECT IDENTIFIER ::= { bcmSwapi 6} + sDot3IfMauBasicGroup OBJECT IDENTIFIER ::= { sRFC2239MIB 2 } + sDot3IfMauAutoNegGroup OBJECT IDENTIFIER ::= { sRFC2239MIB 5 } + + sDot1pMIB OBJECT IDENTIFIER ::= { bcmSwapi 7} + sDot1dExtBase OBJECT IDENTIFIER ::= { sDot1pMIB 1 } + sDot1dPriority OBJECT IDENTIFIER ::= { sDot1pMIB 2 } + sDot1dGarp OBJECT IDENTIFIER ::= { sDot1pMIB 3 } + sDot1dGmrp OBJECT IDENTIFIER ::= { sDot1pMIB 4 } + + sDot1QMIB OBJECT IDENTIFIER ::= { bcmSwapi 8} + sDot1qBase OBJECT IDENTIFIER ::= { sDot1QMIB 1 } + sDot1qTp OBJECT IDENTIFIER ::= { sDot1QMIB 2 } + sDot1qStatic OBJECT IDENTIFIER ::= { sDot1QMIB 3 } + sDot1qVlan OBJECT IDENTIFIER ::= { sDot1QMIB 4 } + + sRFC1643MIB OBJECT IDENTIFIER ::= { bcmSwapi 9} + sRFC1643Dot3 OBJECT IDENTIFIER ::= { sRFC1643MIB 1 } + + sDot1XMIB OBJECT IDENTIFIER ::= { bcmSwapi 10} + sDot1xBase OBJECT IDENTIFIER ::= { sDot1XMIB 1 } + + + sArch OBJECT IDENTIFIER ::= { bcmSwapi 4096} + sArchSwitchInfo OBJECT IDENTIFIER ::= { sArch 1 } + sSwitchStatsInfo OBJECT IDENTIFIER ::= { sArch 2 } + +-- ------------------------------------------------------------- +-- Textual Conventions +-- ------------------------------------------------------------- + +EnabledStatus ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "A simple status value for the object." + SYNTAX INTEGER { enabled(1), disabled(2) } + +PortList ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Each octet within this value specifies a set of eight + ports, with the first octet specifying ports 1 through + 8, the second octet specifying ports 9 through 16, etc. + Within each octet, the most significant bit represents + the lowest numbered port, and the least significant bit + represents the highest numbered port. Thus, each port + of the bridge is represented by a single bit within the + value of this object. If that bit has a value of '1' + then that port is included in the set of ports; the port + is not included if its bit has a value of '0'." + SYNTAX OCTET STRING + +VlanIndex ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "A value used to index per-VLAN tables: values of 0 and + 4095 are not permitted; if the value is between 1 and + 4094 inclusive, it represents an IEEE 802.1Q VLAN-ID with + global scope within a given bridged domain (see VlanId + textual convention). If the value is greater than 4095 + then it represents a VLAN with scope local to the + particular agent, i.e. one without a global VLAN-ID + assigned to it. Such VLANs are outside the scope of + IEEE 802.1Q but it is convenient to be able to manage them + in the same way using this MIB." + SYNTAX Unsigned32 + +TimeFilter ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "To be used for the index to a table. Allows an application + to download only those rows changed since a particular time. + A row is considered changed if the value of any object in the + row changes or if the row is created or deleted. + + When sysUpTime is equal to zero, this table shall be empty. + + One entry exists for each past value of sysUpTime, except that + the whole table is purged should sysUpTime wrap. + + As this basic row is updated new conceptual rows are created + (which still share the now updated object values with all + other instances). The number of instances which are created + is determined by the value of sysUpTime at which the basic row + was last updated. One instance will exist for each value of + sysUpTime at the last update time for the row. A new + timeMark instance is created for each new sysUpTime value. + Each new conceptual row will be associated with the timeMark + instance which was created at the value of sysUpTime with + which the conceptual row is to be associated. + + By definition all conceptual rows were updated at or after + time zero and so at least one conceptual row (associated with + timeMark.0) must exist for each underlying (basic) row. + + See the appendix for further discussion of this variable. + + Consider the following fooTable: + + fooTable ... + INDEX { fooTimeMark, fooIndex } + + FooEntry { + fooTimeMark TimeFilter + fooIndex INTEGER, + fooCounts Counter + } + + Should there be two basic rows in this table (fooIndex == 1, + fooIndex == 2) and row 1 was updated most recently at time 6, + while row 2 was updated most recently at time 8, and both rows + had been updated on several earlier occasions such that the + current values were 5 and 9 respectively then the following + fooCounts instances would exist. + + fooCounts.0.1 5 + fooCounts.0.2 9 + fooCounts.1.1 5 + fooCounts.1.2 9 + fooCounts.2.1 5 + fooCounts.2.2 9 + fooCounts.3.1 5 + fooCounts.3.2 9 + fooCounts.4.1 5 + fooCounts.4.2 9 + fooCounts.5.1 5 + fooCounts.5.2 9 + fooCounts.6.1 5 + fooCounts.6.2 9 + fooCounts.7.2 9 -- note that row 1 doesn't exist for + fooCounts.8.2 9 -- times 7 and 8" + SYNTAX TimeTicks + +-- The Generic Bridge Port Table + + sDot1dBasePortTable OBJECT-TYPE + SYNTAX SEQUENCE OF SwapiDot1dBasePortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that contains generic information about + every port that is associated with this bridge. + Transparent, source-route, and srt ports are + included." + ::= { sDot1dBase 4 } + + sDot1dBasePortEntry OBJECT-TYPE + SYNTAX SwapiDot1dBasePortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of information for each port of the + bridge." + REFERENCE + "IEEE 802.1D-1990: Section 6.4.2, 6.6.1" + INDEX { sDot1dBasePort } + ::= { sDot1dBasePortTable 1 } + + + SwapiDot1dBasePortEntry ::= + SEQUENCE { + sDot1dBasePort + INTEGER, + sDot1dBaseIfIndex + INTEGER, + sDot1dBasePortMtuExceededDiscards + Counter32 + } + + + sDot1dBasePort OBJECT-TYPE + SYNTAX INTEGER (1..256) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The port number of the port for which this entry + contains bridge management information." + ::= { sDot1dBasePortEntry 1 } + + + sDot1dBaseIfIndex OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of the instance of the ifIndex object, + defined in MIB-II, for the interface corresponding + to this port." + ::= { sDot1dBasePortEntry 2 } + + + sDot1dBasePortMtuExceededDiscards OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of frames discarded by this port due + to an excessive size. It is incremented by both + transparent and source route bridges." + REFERENCE + "IEEE 802.1D-1990: Section 6.6.1.1.3" + ::= { sDot1dBasePortEntry 5 } + +-- The Spanning Tree Port Table + + sDot1dStpPortTable OBJECT-TYPE + SYNTAX SEQUENCE OF SwapiDot1dStpPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that contains port-specific information + for the Spanning Tree Protocol." + ::= { sDot1dStp 15 } + + sDot1dStpPortEntry OBJECT-TYPE + SYNTAX SwapiDot1dStpPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of information maintained by every port + about the Spanning Tree Protocol state for that + port." + INDEX { sDot1dStpPort } + ::= { sDot1dStpPortTable 1 } + + SwapiDot1dStpPortEntry ::= + SEQUENCE { + sDot1dStpPort INTEGER, + sDot1dStpPortState INTEGER, + sDot1dStpPortEnable INTEGER + } + + sDot1dStpPort OBJECT-TYPE + SYNTAX INTEGER (1..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The port number of the port for which this entry + contains Spanning Tree Protocol management + information." + REFERENCE + "IEEE 802.1D-1990: Section 6.8.2.1.2" + ::= { sDot1dStpPortEntry 1 } + + sDot1dStpPortState OBJECT-TYPE + SYNTAX INTEGER { + disabled(1), + blocking(2), + listening(3), + learning(4), + forwarding(5), + broken(6) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The port's current state as defined by + application of the Spanning Tree Protocol. This + state controls what action a port takes on + reception of a frame. If the bridge has detected + a port that is malfunctioning it will place that + port into the broken(6) state. For ports which + are disabled (see dot1dStpPortEnable), this object + will have a value of disabled(1)." + REFERENCE + "IEEE 802.1D-1990: Section 4.5.5.2" + ::= { sDot1dStpPortEntry 2 } + + + sDot1dStpPortEnable OBJECT-TYPE + SYNTAX INTEGER { + enabled(1), + disabled(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The enabled/disabled status of the port." + REFERENCE + "IEEE 802.1D-1990: Section 4.5.5.2" + ::= { sDot1dStpPortEntry 3 } + + sDot1dTpLearnedEntryDiscards OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of Forwarding Database entries, + which have been or would have been learnt, but + have been discarded due to a lack of space to + store them in the Forwarding Database. If this + counter is increasing, it indicates that the + Forwarding Database is regularly becoming full (a + condition which has unpleasant performance effects + on the subnetwork). If this counter has a + significant value but is not presently increasing, + it indicates that the problem has been occurring + but is not persistent." + REFERENCE + "IEEE 802.1D-1990: Section 6.7.1.1.3" + ::= { sDot1dTp 1 } + + + sDot1dTpAgingTime OBJECT-TYPE + SYNTAX INTEGER (10..1000000) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The timeout period in seconds for aging out + dynamically learned forwarding information. + 802.1D-1990 recommends a default of 300 seconds.But in TiNet S2008Ei, + the value is from 16 to 4080 in 16 increments." + --"对于TiNet S2008EI，此值为16到4080，而且必须为16的倍数。" + REFERENCE + "IEEE 802.1D-1990: Section 6.7.1.1.3" + ::= { sDot1dTp 2 } + + -- The Forwarding Database for Transparent Bridges + + sDot1dTpFdbTable OBJECT-TYPE + SYNTAX SEQUENCE OF Sdot1dTpFdbEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A table that contains information about unicast + entries for which the bridge has forwarding and/or + filtering information. This information is used + by the transparent bridging function in + determining how to propagate a received frame." + ::= { sDot1dTp 3 } + + sDot1dTpFdbEntry OBJECT-TYPE + SYNTAX Sdot1dTpFdbEntry + ACCESS not-accessible + + + STATUS mandatory + DESCRIPTION + "Information about a specific unicast MAC address + for which the bridge has some forwarding and/or + filtering information." + INDEX { sDot1dTpFdbAddress } + ::= { sDot1dTpFdbTable 1 } + + Sdot1dTpFdbEntry ::= + SEQUENCE { + sDot1dTpFdbAddress + MacAddress, + sDot1dTpFdbPort + INTEGER, + sDot1dTpFdbStatus + INTEGER + } + + sDot1dTpFdbAddress OBJECT-TYPE + SYNTAX MacAddress + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A unicast MAC address for which the bridge has + forwarding and/or filtering information." + REFERENCE + "IEEE 802.1D-1990: Section 3.9.1, 3.9.2" + ::= { sDot1dTpFdbEntry 1 } + + sDot1dTpFdbPort OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Either the value '0', or the port number of the + port on which a frame having a source address + equal to the value of the corresponding instance + of dot1dTpFdbAddress has been seen. A value of + '0' indicates that the port number has not been + learned but that the bridge does have some + forwarding/filtering information about this + address (e.g. in the dot1dStaticTable). + Implementors are encouraged to assign the port + value to this object whenever it is learned even + for addresses for which the corresponding value of + dot1dTpFdbStatus is not learned(3)." + ::= { sDot1dTpFdbEntry 2 } + + + + sDot1dTpFdbStatus OBJECT-TYPE + SYNTAX INTEGER { + other(1), + invalid(2), + learned(3), + self(4), + mgmt(5) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The status of this entry. The meanings of the + values are: + + other(1) : none of the following. This would + include the case where some other + MIB object (not the corresponding + instance of dot1dTpFdbPort, nor an + entry in the dot1dStaticTable) is + being used to determine if and how + frames addressed to the value of + the corresponding instance of + dot1dTpFdbAddress are being + forwarded. + + invalid(2) : this entry is not longer valid + (e.g., it was learned but has since + aged-out), but has not yet been + flushed from the table. + + learned(3) : the value of the corresponding + instance of dot1dTpFdbPort was + learned, and is being used. + + self(4) : the value of the corresponding + instance of dot1dTpFdbAddress + represents one of the bridge's + addresses. The corresponding + instance of dot1dTpFdbPort + indicates which of the bridge's + ports has this address. + + mgmt(5) : the value of the corresponding + instance of dot1dTpFdbAddress is + also the value of an existing + instance of dot1dStaticAddress." + ::= { sDot1dTpFdbEntry 3 } + +-- Start of RMON statistics Group + +-- The Ethernet Statistics Group +-- +-- Implementation of the Ethernet Statistics group is +-- optional. +-- +-- The ethernet statistics group contains statistics +-- measured by the probe for each monitored interface on +-- this device. These statistics take the form of free +-- running counters that start from zero when a valid entry +-- is created. +-- +-- This group currently has statistics defined only for +-- Ethernet interfaces. Each etherStatsEntry contains +-- statistics for one Ethernet interface. The probe must +-- create one etherStats entry for each monitored Ethernet +-- interface on the device. + + sEtherStatsTable OBJECT-TYPE + SYNTAX SEQUENCE OF SwapiEtherStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of Ethernet statistics entries." + ::= { sRFC1757Statistics 1 } + + + sEtherStatsEntry OBJECT-TYPE + SYNTAX SwapiEtherStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A collection of statistics kept for a particular + Ethernet interface. As an example, an instance of the + etherStatsPkts object might be named etherStatsPkts.1" + INDEX { sEtherStatsIndex } + ::= { sEtherStatsTable 1 } + + SwapiEtherStatsEntry ::= SEQUENCE { + sEtherStatsIndex INTEGER, + sEtherStatsDropEvents Counter32, + sEtherStatsOctets Counter32, + sEtherStatsPkts Counter32, + sEtherStatsBroadcastPkts Counter32, + sEtherStatsMulticastPkts Counter32, + sEtherStatsCRCAlignErrors Counter32, + sEtherStatsUndersizePkts Counter32, + sEtherStatsOversizePkts Counter32, + sEtherStatsFragments Counter32, + sEtherStatsJabbers Counter32, + sEtherStatsCollisions Counter32, + sEtherStatsPkts64Octets Counter32, + sEtherStatsPkts65to127Octets Counter32, + sEtherStatsPkts128to255Octets Counter32, + sEtherStatsPkts256to511Octets Counter32, + sEtherStatsPkts512to1023Octets Counter32, + sEtherStatsPkts1024to1518Octets Counter32, + sEtherStatsRXMACControlFrames Counter32, + sEtherStatsRXPauseMACCtrlFrames Counter32, + sEtherStatsTXPauseMACCtrlFrames Counter32, + sEtherStatsBcmIPMCBridgedPckts Counter32, + sEtherStatsBcmIPMCRoutedPckts Counter32, + sEtherStatsBcmIPMCInDroppedPckts Counter32, + sEtherStatsBcmIPMCOutDroppedPckts Counter32, + sEtherStatsIfInFrameRate Counter32, + sEtherStatsIfInOctetRate Counter32, + sEtherStatsIfOutFrameRate Counter32, + sEtherStatsIfOutOctetRate Counter32 + } + + sEtherStatsIndex OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of this object uniquely identifies this + etherStats entry. Defined as a single port via the MIB-II ifIndex." + ::= { sEtherStatsEntry 1 } + + + sEtherStatsDropEvents OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of events in which packets + were dropped by the probe due to lack of resources. + Note that this number is not necessarily the number of + packets dropped; it is just the number of times this + condition has been detected." + ::= { sEtherStatsEntry 3 } + + sEtherStatsOctets OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of octets of data (including + those in bad packets) received on the + network (excluding framing bits but including + FCS octets). + + This object can be used as a reasonable estimate of + ethernet utilization. If greater precision is + desired, the etherStatsPkts and etherStatsOctets + objects should be sampled before and after a common + interval. The differences in the sampled values are + Pkts and Octets, respectively, and the number of + seconds in the interval is Interval. These values + are used to calculate the Utilization as follows: + + Pkts * (9.6 + 6.4) + (Octets * .8) + Utilization = ------------------------------------- + Interval * 10,000 + + The result of this equation is the value Utilization + which is the percent utilization of the ethernet + segment on a scale of 0 to 100 percent." + ::= { sEtherStatsEntry 4 } + + sEtherStatsPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of packets (including bad packets, + broadcast packets, and multicast packets) received." + ::= { sEtherStatsEntry 5 } + + sEtherStatsBroadcastPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of good packets received that were + directed to the broadcast address. Note that this + does not include multicast packets." + ::= { sEtherStatsEntry 6 } + + sEtherStatsMulticastPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of good packets received that were + directed to a multicast address. Note that this + number does not include packets directed to the + broadcast address." + ::= { sEtherStatsEntry 7 } + + sEtherStatsCRCAlignErrors OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of packets received that + had a length (excluding framing bits, but + including FCS octets) of between 64 and 1518 + octets, inclusive, but but had either a bad + Frame Check Sequence (FCS) with an integral + number of octets (FCS Error) or a bad FCS with + a non-integral number of octets (Alignment Error)." + ::= { sEtherStatsEntry 8 } + + sEtherStatsUndersizePkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of packets received that were + less than 64 octets long (excluding framing bits, + but including FCS octets) and were otherwise well + formed." + ::= { sEtherStatsEntry 9 } + + sEtherStatsOversizePkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of packets received that were + longer than 1518 octets (excluding framing bits, + but including FCS octets) and were otherwise + well formed." + ::= { sEtherStatsEntry 10 } + + sEtherStatsFragments OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of packets received that were less + than 64 octets in length (excluding framing bits but + including FCS octets) and had either a bad Frame + Check Sequence (FCS) with an integral number of + octets (FCS Error) or a bad FCS with a non-integral + number of octets (Alignment Error). + + Note that it is entirely normal for + etherStatsFragments to increment. This is because + it counts both runts (which are normal occurrences + due to collisions) and noise hits." + ::= { sEtherStatsEntry 11 } + + sEtherStatsJabbers OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of packets received that were + longer than 1518 octets (excluding framing bits, + but including FCS octets), and had either a bad + Frame Check Sequence (FCS) with an integral number + of octets (FCS Error) or a bad FCS with a + non-integral number of octets (Alignment Error). + + Note that this definition of jabber is different + than the definition in IEEE-802.3 section 8.2.1.5 + (10BASE5) and section 10.3.1.4 (10BASE2). These + documents define jabber as the condition where any + packet exceeds 20 ms. The allowed range to detect + jabber is between 20 ms and 150 ms." + ::= { sEtherStatsEntry 12 } + + sEtherStatsCollisions OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The best estimate of the total number of collisions + on this Ethernet segment. + + The value returned will depend on the location of + the RMON probe. Section 8.2.1.3 (10BASE-5) and + section 10.3.1.3 (10BASE-2) of IEEE standard 802.3 + states that a station must detect a collision, in + the receive mode, if three or more stations are + transmitting simultaneously. A repeater port must + detect a collision when two or more stations are + transmitting simultaneously. Thus a probe placed on + a repeater port could record more collisions than a + probe connected to a station on the same segment + would. + + Probe location plays a much smaller role when + considering 10BASE-T. 14.2.1.4 (10BASE-T) of IEEE + standard 802.3 defines a collision as the + simultaneous presence of signals on the DO and RD + circuits (transmitting and receiving at the same + time). A 10BASE-T station can only detect + collisions when it is transmitting. Thus probes + placed on a station and a repeater, should report + the same number of collisions. + + Note also that an RMON probe inside a repeater + should ideally report collisions between the + repeater and one or more other hosts (transmit + collisions as defined by IEEE 802.3k) plus receiver + collisions observed on any coax segments to which + the repeater is connected." + ::= { sEtherStatsEntry 13 } + + sEtherStatsPkts64Octets OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of packets (including bad + packets) received that were 64 octets in length + (excluding framing bits but including FCS octets)." + ::= { sEtherStatsEntry 14 } + + sEtherStatsPkts65to127Octets OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of packets (including bad + packets) received that were between + 65 and 127 octets in length inclusive + (excluding framing bits but including FCS octets)." + ::= { sEtherStatsEntry 15 } + + sEtherStatsPkts128to255Octets OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of packets (including bad + packets) received that were between + 128 and 255 octets in length inclusive + (excluding framing bits but including FCS octets)." + ::= { sEtherStatsEntry 16 } + + sEtherStatsPkts256to511Octets OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of packets (including bad + packets) received that were between + 256 and 511 octets in length inclusive + (excluding framing bits but including FCS octets)." + ::= { sEtherStatsEntry 17 } + + sEtherStatsPkts512to1023Octets OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of packets (including bad + packets) received that were between + 512 and 1023 octets in length inclusive + (excluding framing bits but including FCS octets)." + ::= { sEtherStatsEntry 18 } + + sEtherStatsPkts1024to1518Octets OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of packets (including bad + packets) received that were between + 1024 and 1518 octets in length inclusive + (excluding framing bits but including FCS octets)." + ::= { sEtherStatsEntry 19 } + + sEtherStatsRXMACControlFrames OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of MAC control frames received." + --接收的MAC控制帧总数. + ::= { sEtherStatsEntry 20 } + + sEtherStatsRXPauseMACCtrlFrames OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of pause frames received." + --接收的PAUSE控制帧总数. + ::= { sEtherStatsEntry 21 } + + sEtherStatsTXPauseMACCtrlFrames OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of pause frames transmitted." + --发送的PAUSE控制帧总数. + ::= { sEtherStatsEntry 22 } + + sEtherStatsBcmIPMCBridgedPckts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of IPMC packets bridged." + --二层转发的IPMC报文总数. + ::= { sEtherStatsEntry 23 } + + sEtherStatsBcmIPMCRoutedPckts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of IPMC packets routed." + --三层路由的IPMC报文总数. + ::= { sEtherStatsEntry 24 } + + sEtherStatsBcmIPMCInDroppedPckts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of IPMC dropped packets for this port in the ingress." + --该端口ingress逻辑丢弃的IPMC报文总数. + ::= { sEtherStatsEntry 25 } + + sEtherStatsBcmIPMCOutDroppedPckts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of IPMC dropped packets for this port in the egress." + --该端口egress逻辑丢弃的IPMC报文总数. + ::= { sEtherStatsEntry 26 } + + sEtherStatsIfInFrameRate OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The ingress packet rate of this port." + --该端口接收报文的速率 + ::= { sEtherStatsEntry 27 } + + sEtherStatsIfInOctetRate OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The ingress octet rate of this port." + --该端口接收报文字节的速率 + ::= { sEtherStatsEntry 28 } + + sEtherStatsIfOutFrameRate OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The egress packet rate of this port." + --该端口发送报文的速率 + ::= { sEtherStatsEntry 29 } + + sEtherStatsIfOutOctetRate OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The egress octet rate of this port." + --该端口发送报文字节的速率 + ::= { sEtherStatsEntry 30 } + +-- +-- The Basic Interface MAU Table +-- + + sIfMauTable OBJECT-TYPE + SYNTAX SEQUENCE OF SwapiIfMauEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table of descriptive and status information about + MAU(s) attached to an interface." + + ::= { sDot3IfMauBasicGroup 1 } + + sIfMauEntry OBJECT-TYPE + SYNTAX SwapiIfMauEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in the table, containing information + about a single MAU." + INDEX { sIfMauIndex } + ::= { sIfMauTable 1 } + + SwapiIfMauEntry ::= + SEQUENCE { + sIfMauIndex Integer32, + sIfMauType OBJECT IDENTIFIER, + sIfMauMediaAvailable INTEGER, + sIfMauJabberState INTEGER, + sIfMauDefaultType OBJECT IDENTIFIER + } + + sIfMauIndex OBJECT-TYPE + SYNTAX Integer32 (1..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This variable uniquely identifies the MAU + described by this entry from among other MAUs + connected to the same interface (sIfMauIfIndex)." + REFERENCE + "[IEEE 802.3 Mgt], 30.5.1.1.1, aMAUID." + ::= { sIfMauEntry 2 } + + sIfMauType OBJECT-TYPE + SYNTAX OBJECT IDENTIFIER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object identifies the 10 or 100 Mb/s + baseband or broadband MAU type. An initial set of + MAU types are defined above. The assignment of + OBJECT IDENTIFIERs to new types of MAUs is managed + by the IANA. If the MAU type is unknown, the + object identifier + + unknownMauType OBJECT IDENTIFIER ::= { 0 0 } + + is returned. Note that unknownMauType is a + syntactically valid object identifier, and any + conformant implementation of ASN.1 and the BER + must be able to generate and recognize this value. + + This object represents the operational type of the + MAU, as determined by either (1) the result of the + auto-negotiation function or (2) if auto- + negotiation is not enabled or is not implemented + for this MAU, by the value of the object + sIfMauDefaultType. In case (2), a set to the + object sIfMauDefaultType will force the MAU into + the new operating mode." + REFERENCE + "[IEEE 802.3 Mgt], 30.5.1.1.2, aMAUType." + ::= { sIfMauEntry 3 } + + sIfMauMediaAvailable OBJECT-TYPE + SYNTAX INTEGER { + other(1), + unknown(2), + available(3), + notAvailable(4), + remoteFault(5), + invalidSignal(6), + remoteJabber(7), + remoteLinkLoss(8), + remoteTest(9), + offline(10), + autoNegError(11) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION "If the MAU is a link or fiber type (FOIRL, + 10BASE-T, 10BASE-F) then this is equivalent to + the link test fail state/low light function. + For an AUI or a coax (including broadband) MAU + this indicates whether or not loopback is + detected on the DI circuit. The value of this + attribute persists between packets for MAU types + AUI, 10BASE5, 10BASE2, 10BROAD36, and 10BASE-FP. + + The value other(1) is returned if the + mediaAvailable state is not one of 2 through 11. + The value unknown(2) is returned when the MAU's + true state is unknown; for example, when it is + being initialized. At power-up or following a + reset, the value of this attribute will be + unknown for AUI, coax, and 10BASE-FP MAUs. For + these MAUs loopback will be tested on each + transmission during which no collision is + detected. If DI is receiving input when DO + returns to IDL after a transmission and there + has been no collision during the transmission + then loopback will be detected. The value of + this attribute will only change during + non-collided transmissions for AUI, coax, and + 10BASE-FP MAUs. + + For 100Mbps and 1000Mbps MAUs, the enumerations + match the states within the respective link + integrity state diagrams, fig 32-16, 23-12 and + 24-15 of sections 32, 23 and 24 of [2]. Any MAU + which implements management of auto-negotiation + will map remote fault indication to remote + fault. + + The value available(3) indicates that the link, + light, or loopback is normal. The value + notAvailable(4) indicates link loss, low light, + or no loopback. + + The value remoteFault(5) indicates that a fault + has been detected at the remote end of the link. + This value applies to 10BASE-FB, 100BASE-T4 Far + End Fault Indication and non-specified remote + faults from a system running auto-negotiation. + The values remoteJabber(7), remoteLinkLoss(8), + and remoteTest(9) SHOULD be used instead of + remoteFault(5) where the reason for remote fault + is identified in the remote signaling protocol. + + The value invalidSignal(6) indicates that an + invalid signal has been received from the other + end of the link. InvalidSignal(6) applies only + to MAUs of type 10BASE-FB. + + Where an IEEE Std 802.3u-1995 clause 22 MII + is present, a logic one in the remote fault bit + (reference section 22.2.4.2.8 of that document) + maps to the value remoteFault(5), and a logic + zero in the link status bit (reference section + 22.2.4.2.10 of that document) maps to the value + notAvailable(4). The value notAvailable(4) + takes precedence over the value remoteFault(5). + + Any MAU that implements management of clause 37 + Auto-Negotiation will map the received RF1 and + RF2 bit values for Offline to offline(10), Link + Failure to remoteFault(5) and Auto-Negotiation + Error to autoNegError(11)." + + REFERENCE + "[IEEE 802.3 Mgt], 30.5.1.1.4, aMediaAvailable." + ::= { sIfMauEntry 5 } + + sIfMauJabberState OBJECT-TYPE + SYNTAX INTEGER { + other(1), + unknown(2), + noJabber(3), + jabbering(4) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value other(1) is returned if the jabber + state is not 2, 3, or 4. The agent must always + return other(1) for MAU type dot3MauTypeAUI. + + The value unknown(2) is returned when the MAU's + true state is unknown; for example, when it is + being initialized. + + If the MAU is not jabbering the agent returns + noJabber(3). This is the 'normal' state. + + If the MAU is in jabber state the agent returns + the jabbering(4) value." + REFERENCE + "[IEEE 802.3 Mgt], 30.5.1.1.6, + aJabber.jabberFlag." + ::= { sIfMauEntry 7 } + + sIfMauDefaultType OBJECT-TYPE + SYNTAX OBJECT IDENTIFIER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object identifies the default administrative + 10 or 100 Mb/s baseband MAU type, to be used in + conjunction with the operational MAU type denoted + by sIfMauType. + + The set of possible values for this object is the + same as the set defined for the sIfMauType object. + + This object represents the administratively- + configured type of the MAU. If auto-negotiation + is not enabled or is not implemented for this MAU, + the value of this object determines the + operational type of the MAU. In this case, a set + to this object will force the MAU into the + specified operating mode. + + If auto-negotiation is implemented and enabled for + this MAU, the operational type of the MAU is + determined by auto-negotiation, and the value of + this object denotes the type to which the MAU will + automatically revert if/when auto-negotiation is + later disabled. + + NOTE TO IMPLEMENTORS: It may be necessary to + provide for underlying hardware implementations + which do not follow the exact behavior specified + above. In particular, when + sIfMauAutoNegAdminStatus transitions from enabled + to disabled, the agent implementation must ensure + that the operational type of the MAU (as reported + by sIfMauType) correctly transitions to the value + specified by this object, rather than continuing + to operate at the value earlier determined by the + auto-negotiation function." + REFERENCE + "[IEEE 802.3 Mgt], 30.5.1.1.1, aMAUID, and [IEEE + 802.3 Std], 22.2.4.1.4." + ::= { sIfMauEntry 11 } + +-- The sIfMauAutoNegTable applies to systems in which +-- auto-negotiation is supported on one or more MAUs +-- attached to interfaces. Note that if auto-negotiation +-- is present and enabled, the sIfMauType object reflects +-- the result of the auto-negotiation function. + + sIfMauAutoNegTable OBJECT-TYPE + SYNTAX SEQUENCE OF SwapiIfMauAutoNegEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Configuration and status objects for the auto- + negotiation function of MAUs attached to + interfaces." + ::= { sDot3IfMauAutoNegGroup 1 } + + sIfMauAutoNegEntry OBJECT-TYPE + SYNTAX SwapiIfMauAutoNegEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in the table, containing configuration + and status information for the auto-negotiation + function of a particular MAU." + INDEX { sIfMauIndex } + ::= { sIfMauAutoNegTable 1 } + + SwapiIfMauAutoNegEntry ::= + SEQUENCE { + sIfMauAutoNegAdminStatus INTEGER, + sIfMauAutoNegRestart INTEGER, + sIfMauAutoControl INTEGER, + sIfMauAutoNegCapAdvertisedBits BITS, + sIfMauAutoNegCapReceivedBits BITS + } + + + sIfMauAutoNegAdminStatus OBJECT-TYPE + SYNTAX INTEGER { + enabled(1), + disabled(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Setting this object to enabled(1) will cause the + interface which has the auto-negotiation signaling + ability to be enabled. + + If the value of this object is disabled(2) then + the interface will act as it would if it had no + auto-negotiation signaling. Under these + conditions, an IEEE 802.3 MAU will immediately be + forced to the state indicated by the value of the + object sIfMauDefaultType. + + NOTE TO IMPLEMENTORS: When + sIfMauAutoNegAdminStatus transitions from enabled + to disabled, the agent implementation must ensure + that the operational type of the MAU (as reported + by sIfMauType) correctly transitions to the value + specified by the sIfMauDefaultType object, rather + than continuing to operate at the value earlier + determined by the auto-negotiation function." + REFERENCE + "[IEEE 802.3 Mgt], 30.6.1.1.2, aAutoNegAdminState + and 30.6.1.2.2, acAutoNegAdminControl." + ::= { sIfMauAutoNegEntry 1 } + + sIfMauAutoNegRestart OBJECT-TYPE + SYNTAX INTEGER { + restart(1), + norestart(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "If the value of this object is set to restart(1) + then this will force auto-negotiation to begin + link renegotiation. If auto-negotiation signaling + is disabled, a write to this object has no effect. + + Setting the value of this object to norestart(2) + has no effect." + REFERENCE + "[IEEE 802.3 Mgt], 30.6.1.2.1, + acAutoNegRestartAutoConfig." + ::= { sIfMauAutoNegEntry 8 } + + sIfMauAutoNegCapAdvertisedBits OBJECT-TYPE + SYNTAX BITS { + bOther(0), -- other or unknown + b10baseT(1), -- 10BASE-T half duplex mode + b10baseTFD(2), -- 10BASE-T full duplex mode + b100baseT4(3), -- 100BASE-T4 + b100baseTX(4), -- 100BASE-TX half duplex mode + b100baseTXFD(5), -- 100BASE-TX full duplex mode + b100baseT2(6), -- 100BASE-T2 half duplex mode + b100baseT2FD(7), -- 100BASE-T2 full duplex mode + bFdxPause(8), -- PAUSE for full-duplex links + bFdxAPause(9), -- Asymmetric PAUSE for full-duplex + -- links + bFdxSPause(10), -- Symmetric PAUSE for full-duplex + -- links + bFdxBPause(11), -- Asymmetric and Symmetric PAUSE for + -- full-duplex links + b1000baseX(12), -- 1000BASE-X, -LX, -SX, -CX half + -- duplex mode + b1000baseXFD(13), -- 1000BASE-X, -LX, -SX, -CX full + -- duplex mode + b1000baseT(14), -- 1000BASE-T half duplex mode + b1000baseTFD(15) -- 1000BASE-T full duplex mode + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "A value that uniquely identifies the set of + capabilities advertised by the local + auto-negotiation entity. + + Capabilities in this object that are not + available in ifMauAutoNegCapability cannot be + enabled." + REFERENCE "[IEEE 802.3 Std], 30.6.1.1.6, + aAutoNegAdvertisedTechnologyAbility." + ::= { sIfMauAutoNegEntry 10 } + + sIfMauAutoNegCapReceivedBits OBJECT-TYPE + SYNTAX BITS { + bOther(0), -- other or unknown + b10baseT(1), -- 10BASE-T half duplex mode + b10baseTFD(2), -- 10BASE-T full duplex mode + b100baseT4(3), -- 100BASE-T4 + b100baseTX(4), -- 100BASE-TX half duplex mode + b100baseTXFD(5), -- 100BASE-TX full duplex mode + b100baseT2(6), -- 100BASE-T2 half duplex mode + b100baseT2FD(7), -- 100BASE-T2 full duplex mode + bFdxPause(8), -- PAUSE for full-duplex links + bFdxAPause(9), -- Asymmetric PAUSE for full-duplex + -- links + bFdxSPause(10), -- Symmetric PAUSE for full-duplex + -- links + bFdxBPause(11), -- Asymmetric and Symmetric PAUSE for + -- full-duplex links + b1000baseX(12), -- 1000BASE-X, -LX, -SX, -CX half + -- duplex mode + b1000baseXFD(13), -- 1000BASE-X, -LX, -SX, -CX full + -- duplex mode + b1000baseT(14), -- 1000BASE-T half duplex mode + b1000baseTFD(15) -- 1000BASE-T full duplex mode + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION "A value that uniquely identifies the set of + capabilities received from the remote + auto-negotiation entity. + + Note that interfaces that support this MIB may + be attached to remote auto-negotiation entities + which have capabilities beyond the scope of this + MIB." + REFERENCE "[IEEE 802.3 Std], 30.6.1.1.7, + aAutoNegReceivedTechnologyAbility." + ::= { sIfMauAutoNegEntry 11 } + + +-- ------------------------------------------------------------- + +-- ------------------------------------------------------------- +-- The following are from the 802.1p MIB +-- ------------------------------------------------------------- + + +-- ------------------------------------------------------------- +-- the sDot1dExtBase group +-- ------------------------------------------------------------- + + sDot1dDeviceCapabilities OBJECT-TYPE + SYNTAX BITS { + sDot1dExtendedFilteringServices(0), + -- can perform filtering of + -- individual multicast addresses + -- controlled by GMRP. + sDot1dTrafficClasses(1), + -- can map user priority to + -- multiple traffic classes. + dot1qStaticEntryIndividualPort(2), + -- dot1qStaticUnicastReceivePort & + -- dot1qStaticMulticastReceivePort + -- can represent non-zero entries. + dot1qIVLCapable(3), -- Independent VLAN Learning. + dot1qSVLCapable(4), -- Shared VLAN Learning. + dot1qHybridCapable(5), + -- both IVL & SVL simultaneously. + dot1qConfigurablePvidTagging(6), + -- whether the implementation + -- supports the ability to + -- override the default PVID + -- setting and its egress status + -- (VLAN-Tagged or Untagged) on + -- each port. + sDot1dLocalVlanCapable(7) + -- can support multiple local + -- bridges, outside of the scope + -- of 802.1Q defined VLANs. + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the optional parts of IEEE 802.1D and 802.1Q + that are implemented by this device and are manageable + through this MIB. Capabilities that are allowed on a + per-port basis are indicated in sDot1dPortCapabilities." + REFERENCE + "ISO/IEC 15802-3 Section 5.2, + IEEE 802.1Q/D11 Section 5.2, 12.10.1.1.3/b/2" + ::= { sDot1dExtBase 1 } + + sDot1dTrafficClassesEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "DURABLE: { true } + The value true(1) indicates that Traffic Classes are + enabled on this bridge. When false(2), the bridge + operates with a single priority level for all traffic." + DEFVAL { true } + ::= { sDot1dExtBase 2 } + + sDot1dGmrpStatus OBJECT-TYPE + SYNTAX EnabledStatus + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "DURABLE: { enable } + The administrative status requested by management for + GMRP. The value enabled(1) indicates that GMRP should + be enabled on this device, in all VLANs, on all ports + for which it has not been specifically disabled. When + disabled(2), GMRP is disabled, in all VLANs, on all + ports and all GMRP packets will be forwarded + transparently. This object affects both Applicant and + Registrar state machines. A transition from disabled(2) + to enabled(1) will cause a reset of all GMRP state + machines on all ports." + DEFVAL { enabled } + ::= { sDot1dExtBase 3 } + +-- ------------------------------------------------------------- +-- Port Capabilities Table +-- ------------------------------------------------------------- + + sDot1dPortCapabilitiesTable OBJECT-TYPE + SYNTAX SEQUENCE OF SwapiDot1dPortCapabilitiesEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that contains capabilities information about + every port that is associated with this bridge." + ::= { sDot1dExtBase 4 } + + sDot1dPortCapabilitiesEntry OBJECT-TYPE + SYNTAX SwapiDot1dPortCapabilitiesEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A set of capabilities information about this port + indexed by sDot1dBasePort." + AUGMENTS { sDot1dBasePortEntry } + ::= { sDot1dPortCapabilitiesTable 1 } + + SwapiDot1dPortCapabilitiesEntry ::= + SEQUENCE { + sDot1dPortCapabilities + BITS + } + + sDot1dPortCapabilities OBJECT-TYPE + SYNTAX BITS { + dot1qDot1qTagging(0), -- supports 802.1Q VLAN tagging of + -- frames and GVRP. + dot1qConfigurableAcceptableFrameTypes(1), + -- allows modified values of + -- dot1qPortAcceptableFrameTypes. + dot1qIngressFiltering(2) + -- supports the discarding of any + -- frame received on a Port whose + -- VLAN classification does not + -- include that Port in its Member + -- set. + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the parts of IEEE 802.1D and 802.1Q that are + optional on a per-port basis that are implemented by + this device and are manageable through this MIB." + REFERENCE + "ISO/IEC 15802-3 Section 5.2, + IEEE 802.1Q/D11 Section 5.2" + ::= { sDot1dPortCapabilitiesEntry 1 } + +-- ------------------------------------------------------------- +-- the sDot1dPriority group +-- ------------------------------------------------------------- + +-- ------------------------------------------------------------- +-- Port Priority Table +-- ------------------------------------------------------------- + + sDot1dPortPriorityTable OBJECT-TYPE + SYNTAX SEQUENCE OF SwapiDot1dPortPriorityEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that contains information about every port that + is associated with this transparent bridge." + ::= { sDot1dPriority 1 } + + sDot1dPortPriorityEntry OBJECT-TYPE + SYNTAX SwapiDot1dPortPriorityEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of Default User Priorities for each port of a + transparent bridge. This is indexed by sDot1dBasePort." + AUGMENTS { sDot1dBasePortEntry } + ::= { sDot1dPortPriorityTable 1 } + + SwapiDot1dPortPriorityEntry ::= + SEQUENCE { + sDot1dPortDefaultUserPriority + INTEGER, + sDot1dPortNumTrafficClasses + INTEGER + } + + sDot1dPortDefaultUserPriority OBJECT-TYPE + SYNTAX INTEGER (0..7) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "DURABLE: { 0:all } + The default ingress User Priority for this port. This + only has effect on media, such as Ethernet, that do not + support native User Priority." + ::= { sDot1dPortPriorityEntry 1 } + + sDot1dPortNumTrafficClasses OBJECT-TYPE + SYNTAX INTEGER (1..8) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of egress traffic classes supported on this + port. This object may optionally be read-only." + ::= { sDot1dPortPriorityEntry 2 } + +-- ------------------------------------------------------------- +-- User Priority Regeneration Table +-- ------------------------------------------------------------- + + sDot1dUserPriorityRegenTable OBJECT-TYPE + SYNTAX SEQUENCE OF SwapiDot1dUserPriorityRegenEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of Regenerated User Priorities for each received + User Priority on each port of a bridge. The Regenerated + User Priority value may be used to index the Traffic + Class Table for each input port. This only has effect + on media that support native User Priority. The default + values for Regenerated User Priorities are the same as + the User Priorities." + REFERENCE + "ISO/IEC 15802-3 Section 6.4" + ::= { sDot1dPriority 2 } + + sDot1dUserPriorityRegenEntry OBJECT-TYPE + SYNTAX SwapiDot1dUserPriorityRegenEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A mapping of incoming User Priority to a Regenerated + User Priority." + INDEX { sDot1dBasePort, sDot1dUserPriority } + ::= { sDot1dUserPriorityRegenTable 1 } + + SwapiDot1dUserPriorityRegenEntry ::= + SEQUENCE { + sDot1dUserPriority + INTEGER, + sDot1dRegenUserPriority + INTEGER + } + + sDot1dUserPriority OBJECT-TYPE + SYNTAX INTEGER (0..7) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The User Priority for a frame received on this port." + ::= { sDot1dUserPriorityRegenEntry 1 } + + sDot1dRegenUserPriority OBJECT-TYPE + SYNTAX INTEGER (0..7) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The Regenerated User Priority the incoming User + Priority is mapped to for this port." + ::= { sDot1dUserPriorityRegenEntry 2 } + +-- ------------------------------------------------------------- +-- Traffic Class Table +-- ------------------------------------------------------------- + + sDot1dTrafficClassTable OBJECT-TYPE + SYNTAX SEQUENCE OF SwapiDot1dTrafficClassEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table mapping evaluated User Priority to Traffic + Class, for forwarding by the bridge. Traffic class is a + number in the range (0..(sDot1dPortNumTrafficClasses-1))." + REFERENCE + "ISO/IEC 15802-3 Table 7-2" + ::= { sDot1dPriority 3 } + + sDot1dTrafficClassEntry OBJECT-TYPE + SYNTAX SwapiDot1dTrafficClassEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "User Priority to Traffic Class mapping." + INDEX { sDot1dBasePort, sDot1dTrafficClassPriority } + ::= { sDot1dTrafficClassTable 1 } + + SwapiDot1dTrafficClassEntry ::= + SEQUENCE { + sDot1dTrafficClassPriority + INTEGER, + sDot1dTrafficClass + INTEGER + } + + sDot1dTrafficClassPriority OBJECT-TYPE + SYNTAX INTEGER (0..7) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The Priority value determined for the received frame. + This value is equivalent to the priority indicated in + the tagged frame received, or one of the evaluated + priorities, determined according to the media-type. + + For untagged frames received from Ethernet media, this + value is equal to the sDot1dPortDefaultUserPriority value + for the ingress port. + + For untagged frames received from non-Ethernet media, + this value is equal to the sDot1dRegenUserPriority value + for the ingress port and media-specific user priority." + ::= { sDot1dTrafficClassEntry 1 } + + sDot1dTrafficClass OBJECT-TYPE + SYNTAX INTEGER (0..7) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "DURABLE: { 0:all } + The Traffic Class the received frame is mapped to." + ::= { sDot1dTrafficClassEntry 2 } + +-- ------------------------------------------------------------- +-- Outbound Access Priority Table +-- ------------------------------------------------------------- + + sDot1dPortOutboundAccessPriorityTable OBJECT-TYPE + SYNTAX SEQUENCE OF SwapiDot1dPortOutboundAccessPriorityEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table mapping Regenerated User Priority to Outbound + Access Priority. This is a fixed mapping for all port + types, with two options for 802.5 Token Ring." + REFERENCE + "ISO/IEC 15802-3 Table 7-3" + ::= { sDot1dPriority 4 } + + sDot1dPortOutboundAccessPriorityEntry OBJECT-TYPE + SYNTAX SwapiDot1dPortOutboundAccessPriorityEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Regenerated User Priority to Outbound Access Priority + mapping." + INDEX { sDot1dBasePort, sDot1dRegenUserPriority } + ::= { sDot1dPortOutboundAccessPriorityTable 1 } + + SwapiDot1dPortOutboundAccessPriorityEntry ::= + SEQUENCE { + sDot1dPortOutboundAccessPriority + INTEGER + } + + sDot1dPortOutboundAccessPriority OBJECT-TYPE + SYNTAX INTEGER (0..7) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Outbound Access Priority the received frame is + mapped to." + ::= { sDot1dPortOutboundAccessPriorityEntry 1 } + +------------------------------------------------------------------------------ +--增加有关芯片队列weight的MIB +------------------------------------------------------------------------------ + oemQueueWeightTable OBJECT-TYPE + SYNTAX SEQUENCE OF oemQueueWeightEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table of weight of queue ." + ::= { sDot1dPriority 5 } + + oemQueueWeightEntry OBJECT-TYPE + SYNTAX oemQueueWeightEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table entry of weight of queue." + INDEX { oemQueue } + ::= { oemQueueWeightTable 1 } + + oemQueueWeightEntry ::= SEQUENCE { + oemQueue Integer32, + oemQueueWeight Integer32 + } + + oemQueue OBJECT-TYPE + SYNTAX Integer32 (1..4) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Queue of class" + ::= { oemQueueWeightEntry 1 } + + oemQueueWeight OBJECT-TYPE + SYNTAX Integer32 (1..255) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Weight of queue" + ::= { oemQueueWeightEntry 2 } + + oemDscpToCosMapTable OBJECT-TYPE + SYNTAX SEQUENCE OF OemDscpToCosMapEntry + ACCESS not-accessible + STATUS current + DESCRIPTION + "A table mapping evaluated DSCP to CoS." + ::= { sDot1dPriority 6 } + + oemDscpToCosMapEntry OBJECT-TYPE + SYNTAX OemDscpToCosMapEntry + ACCESS not-accessible + STATUS current + DESCRIPTION + "DSCP to CoS mapping. " + INDEX { oemDscpToCosMapDscp } + ::= { oemDscpToCosMapTable 1 } + + OemDscpToCosMapEntry ::= + SEQUENCE { + oemDscpToCosMapDscp + INTEGER, + oemDscpToCosMapCos + INTEGER + } + + oemDscpToCosMapDscp OBJECT-TYPE + SYNTAX INTEGER(0..63) + ACCESS read-only + STATUS current + DESCRIPTION + "the DSCP value used to map to CoS. " + ::= { oemDscpToCosMapEntry 1 } + + oemDscpToCosMapCos OBJECT-TYPE + SYNTAX INTEGER(0..7) + ACCESS read-write + STATUS current + DESCRIPTION + "the map result CoS. " + ::= { oemDscpToCosMapEntry 2 } + +-- The OEM DSCP to Cos map status + + oemDscpToCosMapStatus OBJECT-TYPE + SYNTAX TruthValue + ACCESS read-write + STATUS current + DESCRIPTION + "the DSCP to CoS map status. " + ::= { sDot1dPriority 7 } + +-- ------------------------------------------------------------- +-- The GMRP Port Configuration and Status Table +-- ------------------------------------------------------------- + + sDot1dPortGmrpTable OBJECT-TYPE + SYNTAX SEQUENCE OF SwapiDot1dPortGmrpEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table of GMRP control and status information about + every bridge port. Augments the sDot1dBasePortTable." + ::= { sDot1dGmrp 1 } + + sDot1dPortGmrpEntry OBJECT-TYPE + SYNTAX SwapiDot1dPortGmrpEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "GMRP control and status information for a bridge port." + AUGMENTS { sDot1dBasePortEntry } + ::= { sDot1dPortGmrpTable 1 } + + SwapiDot1dPortGmrpEntry ::= + SEQUENCE { + sDot1dPortGmrpStatus + EnabledStatus + } + + sDot1dPortGmrpStatus OBJECT-TYPE + SYNTAX EnabledStatus + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The administrative state of GMRP operation on this port. The + value enabled(1) indicates that GMRP is enabled on this port + in all VLANs as long as sDot1dGmrpStatus is also enabled(1). + A value of disabled(2) indicates that GMRP is disabled on this + port in all VLANs: any GMRP packets received will + be silently discarded and no GMRP registrations will be + propagated from other ports. Setting this to a value of + enabled(1) will be stored by the agent but will only take effect + on the GMRP protocol operation if sDot1dGmrpStatus also + indicates the value enabled(1). This object affects all + GMRP Applicant and Registrar state machines on this + port. A transition from disabled(2) to enabled(1) will + cause a reset of all GMRP state machines on this port." + DEFVAL { enabled } + ::= { sDot1dPortGmrpEntry 1 } + + sDot1qMaxSupportedVlans OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The maximum number of IEEE 802.1Q VLANs that this + device supports." + REFERENCE + "IEEE 802.1Q/D11 Section 12.10.1.1" + ::= { sDot1qBase 3 } + + sDot1qGvrpStatus OBJECT-TYPE + SYNTAX EnabledStatus + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The administrative status requested by management for + GVRP. The value enabled(1) indicates that GVRP should + be enabled on this device, on all ports for which it has + not been specifically disabled. When disabled(2), GVRP + is disabled on all ports and all GVRP packets will be + forwarded transparently. This object affects all GVRP + Applicant and Registrar state machines. A transition + from disabled(2) to enabled(1) will cause a reset of all + GVRP state machines on all ports." + DEFVAL { enabled } + ::= { sDot1qBase 5 } + + sDot1xStatus OBJECT-TYPE + SYNTAX EnabledStatus + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "802.1x status" + DEFVAL { enabled } + ::= { sDot1xBase 1 } + +-- ------------------------------------------------------------- +-- the dot1qTp group +-- ------------------------------------------------------------- + +-- ------------------------------------------------------------- +-- the current Filtering Database Table +-- ------------------------------------------------------------- + + sDot1qFdbTable OBJECT-TYPE + SYNTAX SEQUENCE OF SwapiDot1qFdbEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that contains configuration and control + information for each Filtering Database currently + operating on this device. Entries in this table appear + automatically when VLANs are assigned FDB IDs in the + dot1qVlanCurrentTable." + ::= { sDot1qTp 1 } + + sDot1qFdbEntry OBJECT-TYPE + SYNTAX SwapiDot1qFdbEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Information about a specific Filtering Database." + INDEX { sDot1qFdbId } + ::= { sDot1qFdbTable 1 } + + SwapiDot1qFdbEntry ::= + SEQUENCE { + sDot1qFdbId + Unsigned32, + sDot1qFdbDynamicCount + Counter32 + } + + sDot1qFdbId OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The identity of this Filtering Database." + ::= { sDot1qFdbEntry 1 } + + sDot1qFdbDynamicCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current number of dynamic entries in this + Filtering Database." + REFERENCE + "IEEE 802.1Q/D11 Section 12.7.1.1.3" + ::= { sDot1qFdbEntry 2 } + +-- ------------------------------------------------------------- +-- Multiple Forwarding Databases for 802.1Q Transparent devices +-- This table is an alternative to the dot1dTpFdbTable, +-- previously defined for 802.1D devices which only support a +-- single Forwarding Database. +-- ------------------------------------------------------------- + + sDot1qTpFdbTable OBJECT-TYPE + SYNTAX SEQUENCE OF Sdot1qTpFdbEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that contains information about unicast entries + for which the device has forwarding and/or filtering + information. This information is used by the + transparent bridging function in determining how to + propagate a received frame." + REFERENCE + "IEEE 802.1Q/D11 Section 12.7.7" + ::= { sDot1qTp 2 } + + sDot1qTpFdbEntry OBJECT-TYPE + SYNTAX Sdot1qTpFdbEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Information about a specific unicast MAC address for + which the device has some forwarding and/or filtering + information." + INDEX { sDot1qFdbId, sDot1qTpFdbAddress } + ::= { sDot1qTpFdbTable 1 } + + Sdot1qTpFdbEntry ::= + SEQUENCE { + sDot1qTpFdbAddress + MacAddress, + sDot1qTpFdbPort + INTEGER, + sDot1qTpFdbStatus + INTEGER + } + + + sDot1qTpFdbAddress OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS not-accessible + STATUS current + + DESCRIPTION + "A unicast MAC address for which the device has + forwarding and/or filtering information." + ::= { sDot1qTpFdbEntry 1 } + + sDot1qTpFdbPort OBJECT-TYPE + SYNTAX INTEGER (0..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Either the value '0', or the port number of the port on + which a frame having a source address equal to the value + of the corresponding instance of dot1qTpFdbAddress has + been seen. A value of '0' indicates that the port + number has not been learned but that the device does + have some forwarding/filtering information about this + address (e.g. in the dot1qStaticUnicastTable). + Implementors are encouraged to assign the port value to + this object whenever it is learned even for addresses + for which the corresponding value of dot1qTpFdbStatus is + not learned(3)." + ::= { sDot1qTpFdbEntry 2 } + + sDot1qTpFdbStatus OBJECT-TYPE + SYNTAX INTEGER { + other(1), + invalid(2), + learned(3), + self(4), + mgmt(5) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The status of this entry. The meanings of the values + are: + other(1) - none of the following. This may include + the case where some other MIB object (not the + corresponding instance of dot1qTpFdbPort, nor an + entry in the dot1qStaticUnicastTable) is being + used to determine if and how frames addressed to + the value of the corresponding instance of + dot1qTpFdbAddress are being forwarded. + invalid(2) - this entry is no longer valid (e.g., it + was learned but has since aged out), but has not + yet been flushed from the table. + learned(3) - the value of the corresponding instance + of dot1qTpFdbPort was learned and is being used. + + self(4) - the value of the corresponding instance of + dot1qTpFdbAddress represents one of the device's + addresses. The corresponding instance of + dot1qTpFdbPort indicates which of the device's + ports has this address. + mgmt(5) - the value of the corresponding instance of + dot1qTpFdbAddress is also the value of an + existing instance of dot1qStaticAddress." + ::= { sDot1qTpFdbEntry 3 } + + sDot1qForwardUnregisteredTable OBJECT-TYPE + SYNTAX SEQUENCE OF SwapiDot1qForwardUnregisteredEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table containing forwarding information for each + VLAN, specifying the set of ports to which forwarding of + multicast group-addressed frames for which there is no + more specific forwarding information applies. This is + configured statically by management and determined + dynamically by GMRP. An entry appears in this table for + all VLANs that are currently instantiated." + REFERENCE + "IEEE 802.1Q/D11 Section 12.7.2, 12.7.7" + ::= { sDot1qTp 5 } + + sDot1qForwardUnregisteredEntry OBJECT-TYPE + SYNTAX SwapiDot1qForwardUnregisteredEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Forwarding information for a VLAN, specifying the set + of ports to which all multicasts for which there is no + more specific forwarding information shall be forwarded. + This is configured statically by management or + dynamically by GMRP." + INDEX { sDot1qVlanIndex } + ::= { sDot1qForwardUnregisteredTable 1 } + + SwapiDot1qForwardUnregisteredEntry ::= + SEQUENCE { + sDot1qForwardUnregisteredPorts + PortList + } + + sDot1qForwardUnregisteredPorts OBJECT-TYPE + SYNTAX PortList + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The complete set of ports in this VLAN to which + multicast group-addressed frames for which there is no + more specific forwarding information will be forwarded. + This includes ports for which this need has been + determined dynamically by GMRP, or configured statically + by management." + ::= { sDot1qForwardUnregisteredEntry 1 } + +-- +-- sDot1qStatic Group +-- +-- ------------------------------------------------------------- +-- The Static (Destination-Address Filtering) Database +-- ------------------------------------------------------------- + + sDot1qStaticUnicastTable OBJECT-TYPE + SYNTAX SEQUENCE OF SwapiDot1qStaticUnicastEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table containing filtering information for Unicast + MAC addresses for each Filtering Database, configured + into the device by (local or network) management + specifying the set of ports to which frames received + from specific ports and containing specific unicast + destination addresses are allowed to be forwarded. A + value of zero in this table as the port number from + which frames with a specific destination address are + received, is used to specify all ports for which there + is no specific entry in this table for that particular + destination address. Entries are valid for unicast + addresses only." + REFERENCE + "IEEE 802.1Q/D11 Section 12.7.7, + ISO/IEC 15802-3 Section 7.9.1" + ::= { sDot1qStatic 1 } + + sDot1qStaticUnicastEntry OBJECT-TYPE + SYNTAX SwapiDot1qStaticUnicastEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Filtering information configured into the device by + (local or network) management specifying the set of + ports to which frames received from a specific port and + containing a specific unicast destination address are + allowed to be forwarded." + INDEX { + sDot1qFdbId, + sDot1qStaticUnicastAddress, + sDot1qStaticUnicastReceivePort + } + ::= { sDot1qStaticUnicastTable 1 } + + SwapiDot1qStaticUnicastEntry ::= + SEQUENCE { + sDot1qStaticUnicastAddress + MacAddress, + sDot1qStaticUnicastReceivePort + INTEGER, + sDot1qStaticUnicastAllowedToGoTo + PortList + } + + sDot1qStaticUnicastAddress OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The destination MAC address in a frame to which this + entry's filtering information applies. This object must + take the value of a unicast address." + ::= { sDot1qStaticUnicastEntry 1 } + + sDot1qStaticUnicastReceivePort OBJECT-TYPE + SYNTAX INTEGER (0..65535) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Either the value '0', or the port number of the port + from which a frame must be received in order for this + entry's filtering information to apply. A value of zero + indicates that this entry applies on all ports of the + device for which there is no other applicable entry." + ::= { sDot1qStaticUnicastEntry 2 } + + sDot1qStaticUnicastAllowedToGoTo OBJECT-TYPE + SYNTAX PortList + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The set of ports for which a frame with a specific + unicast address will be flooded in the event that it + has not been learned. It also specifies the set of + ports a specific unicast address may be dynamically + learnt on. The dot1qTpFdbTable will have an equivalent + entry with a dot1qTpFdbPort value of '0' until this + address has been learnt, when it will be updated with + the port the address has been seen on. This only + applies to ports that are members of the VLAN, defined + by dot1qVlanCurrentEgressPorts. The default value of + this object is a string of ones of appropriate length." + REFERENCE + "IEEE 802.1Q/D11 Table 8-5, ISO/IEC 15802-3 Table 7-5" + ::= { sDot1qStaticUnicastEntry 3 } + + sDot1qStaticMulticastTable OBJECT-TYPE + SYNTAX SEQUENCE OF SwapiDot1qStaticMulticastEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table containing filtering information for Multicast + and Broadcast MAC addresses for each VLAN, configured + into the device by (local or network) management + specifying the set of ports to which frames received + from specific ports and containing specific Multicast + and Broadcast destination addresses are allowed to be + forwarded. A value of zero in this table as the port + number from which frames with a specific destination + address are received, is used to specify all ports for + which there is no specific entry in this table for that + particular destination address. Entries are valid for + Multicast and Broadcast addresses only." + REFERENCE + "IEEE 802.1Q/D11 Section 12.7.7, + ISO/IEC 15802-3 Section 7.9.1" + ::= { sDot1qStatic 2 } + + sDot1qStaticMulticastEntry OBJECT-TYPE + SYNTAX SwapiDot1qStaticMulticastEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Filtering information configured into the device by + (local or network) management specifying the set of + ports to which frames received from this specific port + for this VLAN and containing this Multicast or Broadcast + destination address are allowed to be forwarded." + INDEX { + sDot1qVlanIndex, + sDot1qStaticMulticastAddress, + sDot1qStaticMulticastReceivePort + } + ::= { sDot1qStaticMulticastTable 1 } + + SwapiDot1qStaticMulticastEntry ::= + SEQUENCE { + sDot1qStaticMulticastAddress + MacAddress, + sDot1qStaticMulticastReceivePort + INTEGER, + sDot1qStaticMulticastStaticEgressPorts + PortList, + sDot1qStaticMulticastStatus + INTEGER + } + + sDot1qStaticMulticastAddress OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The destination MAC address in a frame to which this + entry's filtering information applies. This object must + take the value of a Multicast or Broadcast address." + ::= { sDot1qStaticMulticastEntry 1 } + + sDot1qStaticMulticastReceivePort OBJECT-TYPE + SYNTAX INTEGER (0..65535) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Either the value '0', or the port number of the port + from which a frame must be received in order for this + entry's filtering information to apply. A value of zero + indicates that this entry applies on all ports of the + device for which there is no other applicable entry." + ::= { sDot1qStaticMulticastEntry 2 } + + sDot1qStaticMulticastStaticEgressPorts OBJECT-TYPE + SYNTAX PortList + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The set of ports to which frames received from a + specific port and destined for a specific Multicast or + Broadcast MAC address must be forwarded, regardless of + any dynamic information e.g. from GMRP. A port may not + be added in this set if it is already a member of the + set of ports in dot1qStaticMulticastForbiddenEgressPorts. + The default value of this object is a string of ones of + appropriate length." + ::= { sDot1qStaticMulticastEntry 3 } + + sDot1qStaticMulticastStatus OBJECT-TYPE + SYNTAX INTEGER { + other(1), + invalid(2), + permanent(3), + deleteOnReset(4), + deleteOnTimeout(5) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object indicates the status of this entry. + other(1) - this entry is currently in use but + the conditions under which it will remain + so differ from the following values. + invalid(2) - writing this value to the object + removes the corresponding entry. + permanent(3) - this entry is currently in use + and will remain so after the next reset of + the bridge. + deleteOnReset(4) - this entry is currently in + use and will remain so until the next + reset of the bridge. + deleteOnTimeout(5) - this entry is currently in + use and will remain so until it is aged out." + DEFVAL { permanent } + ::= { sDot1qStaticMulticastEntry 5 } + +-- ------------------------------------------------------------- +-- The Current VLAN Database +-- ------------------------------------------------------------- + + sDot1qVlanCurrentTable OBJECT-TYPE + SYNTAX SEQUENCE OF SwapiDot1qVlanCurrentEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table containing current configuration information + for each VLAN currently configured into the device by + (local or network) management, or dynamically created + as a result of GVRP requests received." + ::= { sDot1qVlan 2 } + + sDot1qVlanCurrentEntry OBJECT-TYPE + SYNTAX SwapiDot1qVlanCurrentEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Information for a VLAN configured into the device by + (local or network) management, or dynamically created + as a result of GVRP requests received." + INDEX { sDot1qVlanTimeMark, sDot1qVlanIndex } + ::= { sDot1qVlanCurrentTable 1 } + + SwapiDot1qVlanCurrentEntry ::= + SEQUENCE { + sDot1qVlanTimeMark + TimeFilter, + sDot1qVlanIndex + VlanIndex, + sDot1qVlanFdbId + Unsigned32, + sDot1qVlanCurrentEgressPorts + PortList, + sDot1qVlanCurrentUntaggedPorts + PortList + } + + sDot1qVlanTimeMark OBJECT-TYPE + SYNTAX TimeFilter + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A TimeFilter for this entry. See the TimeFilter + textual convention to see how this works." + ::= { sDot1qVlanCurrentEntry 1 } + + sDot1qVlanIndex OBJECT-TYPE + SYNTAX VlanIndex + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The VLAN-ID or other identifier refering to this VLAN." + ::= { sDot1qVlanCurrentEntry 2 } + + sDot1qVlanFdbId OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Filtering Database used by this VLAN. This is one + of the dot1qFdbId values in the sDot1qFdbTable. This + value is allocated automatically by the device whenever + the VLAN is created: either dynamically by GVRP, or by + management, in dot1qVlanStaticTable. Allocation of this + value follows the learning constraints defined for this + VLAN in dot1qLearningConstraintsTable." + ::= { sDot1qVlanCurrentEntry 3 } + + sDot1qVlanCurrentEgressPorts OBJECT-TYPE + SYNTAX PortList + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The set of ports which are transmitting traffic for + this VLAN as either tagged or untagged frames." + REFERENCE + "IEEE 802.1Q/D11 Section 12.10.2.1" + ::= { sDot1qVlanCurrentEntry 4 } + + sDot1qVlanCurrentUntaggedPorts OBJECT-TYPE + SYNTAX PortList + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The set of ports which are transmitting traffic for + this VLAN as untagged frames." + REFERENCE + "IEEE 802.1Q/D11 Section 12.10.2.1" + ::= { sDot1qVlanCurrentEntry 5 } + +-- ------------------------------------------------------------- +-- The Static VLAN Database +-- ------------------------------------------------------------- + + sDot1qVlanStaticTable OBJECT-TYPE + SYNTAX SEQUENCE OF SwapiDot1qVlanStaticEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table containing static configuration information for + each VLAN configured into the device by (local or + network) management. All entries are permanent and will + be restored after the device is reset." + ::= { sDot1qVlan 3 } + + sDot1qVlanStaticEntry OBJECT-TYPE + SYNTAX SwapiDot1qVlanStaticEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Static information for a VLAN configured into the + device by (local or network) management." + INDEX { sDot1qVlanIndex } + ::= { sDot1qVlanStaticTable 1 } + + SwapiDot1qVlanStaticEntry ::= + SEQUENCE { + sDot1qVlanStaticEgressPorts + PortList, + sDot1qVlanStaticUntaggedPorts + PortList, + sDot1qVlanStaticRowStatus + RowStatus + } + + sDot1qVlanStaticEgressPorts OBJECT-TYPE + SYNTAX PortList + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The set of ports which are permanently assigned to the + egress list for this VLAN by management. Changes to a + bit in this object affect the per-port per-VLAN + Registrar control for Registration Fixed for the + relevant GVRP state machine on each port. A port may + not be added in this set if it is already a member of + the set of ports in sDot1qVlanForbiddenEgressPorts. The + default value of this object is a string of zeros of + appropriate length, indicating not fixed." + REFERENCE + "IEEE 802.1Q/D11 Section 12.7.7.3, 11.2.3.2.3" + ::= { sDot1qVlanStaticEntry 2 } + + sDot1qVlanStaticUntaggedPorts OBJECT-TYPE + SYNTAX PortList + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The set of ports which should transmit egress packets + for this VLAN as untagged. The default value of this + object for the default VLAN (sDot1qVlanIndex = 1) is a string + of appropriate length including all ports. There is no + specified default for other VLANs. If a device agent cannot + support the set of ports being set then it will reject the + set operation with an error. An example might be if a + manager attempts to set more than one VLAN to be untagged + on egress where the device does not support this IEEE 802.1Q + option." + REFERENCE + "IEEE 802.1Q/D11 Section 12.10.2.1" + ::= { sDot1qVlanStaticEntry 4 } + + sDot1qVlanStaticRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object indicates the status of this entry." + ::= { sDot1qVlanStaticEntry 5 } + +-- ------------------------------------------------------------- +-- The VLAN Port Configuration Table +-- ------------------------------------------------------------- + + sDot1qPortVlanTable OBJECT-TYPE + SYNTAX SEQUENCE OF SwapiDot1qPortVlanEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table containing per port control and status + information for VLAN configuration in the device." + ::= { sDot1qVlan 5 } + + sDot1qPortVlanEntry OBJECT-TYPE + SYNTAX SwapiDot1qPortVlanEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Information controlling VLAN configuration for a port + on the device. This is indexed by sDot1dBasePort." + AUGMENTS { sDot1dBasePortEntry } + ::= { sDot1qPortVlanTable 1 } + + SwapiDot1qPortVlanEntry ::= + SEQUENCE { + sDot1qPvid + VlanIndex, + sDot1qPortAcceptableFrameTypes + INTEGER, + sDot1qPortIngressFiltering + TruthValue, + sDot1qPortGvrpStatus + EnabledStatus + } + + sDot1qPvid OBJECT-TYPE + SYNTAX VlanIndex + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "DURABLE: { 1:all } + The PVID, the VLAN ID assigned to untagged frames or + Prority-Tagged frames received on this port." + REFERENCE + "IEEE 802.1Q/D11 Section 12.10.1.1" + DEFVAL { 1 } + ::= { sDot1qPortVlanEntry 1 } + + sDot1qPortAcceptableFrameTypes OBJECT-TYPE + SYNTAX INTEGER { + admitAll(1), + admitOnlyVlanTagged(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "DURABLE: { 1:all } + When this is admitOnlyVlanTagged(2) the device will + discard untagged frames or Priority-Tagged frames + received on this port. When admitAll(1), untagged + frames or Prority-Tagged frames received on this port + will be accepted and assigned to the PVID for this port. + + This control does not affect VLAN independent BPDU + frames, such as GVRP and STP. It does affect VLAN + dependent BPDU frames, such as GMRP." + REFERENCE + "IEEE 802.1Q/D11 Section 12.10.1.3" + DEFVAL { admitAll } + ::= { sDot1qPortVlanEntry 2 } + + sDot1qPortIngressFiltering OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "DURABLE: { 2:all } + When this is true(1) the device will discard incoming + frames for VLANs which do not include this Port in its + Member set. When false(2), the port will accept all + incoming frames. + + This control does not affect VLAN independent BPDU + frames, such as GVRP and STP. It does affect VLAN + dependent BPDU frames, such as GMRP." + REFERENCE + "IEEE 802.1Q/D11 Section 12.10.1.4" + DEFVAL { false } + ::= { sDot1qPortVlanEntry 3 } + + sDot1qPortGvrpStatus OBJECT-TYPE + SYNTAX EnabledStatus + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The state of GVRP operation on this port. The value + enabled(1) indicates that GVRP is enabled on this port, + as long as dot1qGvrpStatus is also enabled for this + device. When disabled(2) but dot1qGvrpStatus is still + enabled for the device, GVRP is disabled on this port: + any GVRP packets received will be silently discarded and + no GVRP registrations will be propagated from other + ports. This object affects all GVRP Applicant and + Registrar state machines on this port. A transition + from disabled(2) to enabled(1) will cause a reset of all + GVRP state machines on this port." + DEFVAL { enabled } + ::= { sDot1qPortVlanEntry 4 } + +-- +-- sRFC1643 Group +-- + sDot3StatsTable OBJECT-TYPE + SYNTAX SEQUENCE OF SwapiDot3StatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Statistics for a collection of ethernet-like + interfaces attached to a particular system." + ::= { sRFC1643Dot3 2 } + + sDot3StatsEntry OBJECT-TYPE + SYNTAX SwapiDot3StatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Statistics for a particular interface to an + ethernet-like medium." + INDEX { sDot3StatsIndex } + ::= { sDot3StatsTable 1 } + + + SwapiDot3StatsEntry ::= SEQUENCE { + sDot3StatsIndex INTEGER, + sDot3StatsAlignmentErrors Counter32, + sDot3StatsFCSErrors Counter32, + sDot3StatsSingleCollisionFrames Counter32, + sDot3StatsMultipleCollisionFrames Counter32, + sDot3StatsSQETestErrors Counter32, + sDot3StatsDeferredTransmissions Counter32, + sDot3StatsLateCollisions Counter32, + sDot3StatsExcessiveCollisions Counter32, + sDot3StatsInternalMacTransmitErrors Counter32, + sDot3StatsCarrierSenseErrors Counter32, + sDot3StatsFrameTooLongs Counter32, + sDot3StatsInternalMacReceiveErrors Counter32, + sDot3StatsEtherChipSet OBJECT IDENTIFIER, + sDot3StatsSymbolErrors Counter32, + sDot3StatsDuplexStatus INTEGER + } + + sDot3StatsIndex OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "An index value that uniquely identifies an + interface to an ethernet-like medium. The + interface identified by a particular value of + this index is the same interface as identified + by the same value of ifIndex." + ::= { sDot3StatsEntry 1 } + + sDot3StatsAlignmentErrors OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A count of frames received on a particular + interface that are not an integral number of + octets in length and do not pass the FCS check. + + The count represented by an instance of this + object is incremented when the alignmentError + status is returned by the MAC service to the + LLC (or other MAC user). Received frames for + which multiple error conditions obtain are, + according to the conventions of IEEE 802.3 + Layer Management, counted exclusively according + to the error status presented to the LLC." + REFERENCE + "IEEE 802.3 Layer Management" + + + ::= { sDot3StatsEntry 2 } + + sDot3StatsFCSErrors OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A count of frames received on a particular + interface that are an integral number of octets + in length but do not pass the FCS check. + + The count represented by an instance of this + object is incremented when the frameCheckError + status is returned by the MAC service to the + LLC (or other MAC user). Received frames for + which multiple error conditions obtain are, + according to the conventions of IEEE 802.3 + Layer Management, counted exclusively according + to the error status presented to the LLC." + REFERENCE + "IEEE 802.3 Layer Management" + ::= { sDot3StatsEntry 3 } + + sDot3StatsSingleCollisionFrames OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A count of successfully transmitted frames on + a particular interface for which transmission + is inhibited by exactly one collision. + + A frame that is counted by an instance of this + object is also counted by the corresponding + instance of either the ifOutUcastPkts, + ifOutMulticastPkts, or ifOutBroadcastPkts, + and is not counted by the corresponding + instance of the sDot3StatsMultipleCollisionFrames + object." + REFERENCE + "IEEE 802.3 Layer Management" + ::= { sDot3StatsEntry 4 } + + sDot3StatsMultipleCollisionFrames OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + + + "A count of successfully transmitted frames on + a particular interface for which transmission + is inhibited by more than one collision. + + A frame that is counted by an instance of this + object is also counted by the corresponding + instance of either the ifOutUcastPkts, + ifOutMulticastPkts, or ifOutBroadcastPkts, + and is not counted by the corresponding + instance of the sDot3StatsSingleCollisionFrames + object." + REFERENCE + "IEEE 802.3 Layer Management" + ::= { sDot3StatsEntry 5 } + + sDot3StatsSQETestErrors OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A count of times that the SQE TEST ERROR + message is generated by the PLS sublayer for a + particular interface. The SQE TEST ERROR + message is defined in section 7.2.2.2.4 of + ANSI/IEEE 802.3-1985 and its generation is + described in section 7.2.4.6 of the same + document." + REFERENCE + "ANSI/IEEE Std 802.3-1985 Carrier Sense + Multiple Access with Collision Detection Access + Method and Physical Layer Specifications" + ::= { sDot3StatsEntry 6 } + + sDot3StatsDeferredTransmissions OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A count of frames for which the first + transmission attempt on a particular interface + is delayed because the medium is busy. + + The count represented by an instance of this + object does not include frames involved in + collisions." + REFERENCE + "IEEE 802.3 Layer Management" + ::= { sDot3StatsEntry 7 } + + + sDot3StatsLateCollisions OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of times that a collision is + detected on a particular interface later than + 512 bit-times into the transmission of a + packet. + + Five hundred and twelve bit-times corresponds + to 51.2 microseconds on a 10 Mbit/s system. A + (late) collision included in a count + represented by an instance of this object is + also considered as a (generic) collision for + purposes of other collision-related + statistics." + REFERENCE + "IEEE 802.3 Layer Management" + ::= { sDot3StatsEntry 8 } + + sDot3StatsExcessiveCollisions OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A count of frames for which transmission on a + particular interface fails due to excessive + collisions." + REFERENCE + "IEEE 802.3 Layer Management" + ::= { sDot3StatsEntry 9 } + + sDot3StatsInternalMacTransmitErrors OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A count of frames for which transmission on a + particular interface fails due to an internal + MAC sublayer transmit error. A frame is only + counted by an instance of this object if it is + not counted by the corresponding instance of + either the sDot3StatsLateCollisions object, the + sDot3StatsExcessiveCollisions object, or the + sDot3StatsCarrierSenseErrors object. + + + The precise meaning of the count represented by + an instance of this object is implementation- + specific. In particular, an instance of this + object may represent a count of transmission + errors on a particular interface that are not + otherwise counted." + REFERENCE + "IEEE 802.3 Layer Management" + ::= { sDot3StatsEntry 10 } + + sDot3StatsCarrierSenseErrors OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of times that the carrier sense + condition was lost or never asserted when + attempting to transmit a frame on a particular + interface. + + The count represented by an instance of this + object is incremented at most once per + transmission attempt, even if the carrier sense + condition fluctuates during a transmission + attempt." + REFERENCE + "IEEE 802.3 Layer Management" + ::= { sDot3StatsEntry 11 } + + -- { sDot3StatsEntry 12 } is not assigned + + sDot3StatsFrameTooLongs OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A count of frames received on a particular + interface that exceed the maximum permitted + frame size. + + The count represented by an instance of this + object is incremented when the frameTooLong + status is returned by the MAC service to the + LLC (or other MAC user). Received frames for + which multiple error conditions obtain are, + according to the conventions of IEEE 802.3 + Layer Management, counted exclusively according + to the error status presented to the LLC." + + + REFERENCE + "IEEE 802.3 Layer Management" + ::= { sDot3StatsEntry 13 } + + -- { sDot3StatsEntry 14 } is not assigned + + -- { sDot3StatsEntry 15 } is not assigned + + sDot3StatsInternalMacReceiveErrors OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A count of frames for which reception on a + particular interface fails due to an internal + MAC sublayer receive error. A frame is only + counted by an instance of this object if it is + not counted by the corresponding instance of + either the sDot3StatsFrameTooLongs object, the + sDot3StatsAlignmentErrors object, or the + sDot3StatsFCSErrors object. + + The precise meaning of the count represented by + an instance of this object is implementation- + specific. In particular, an instance of this + object may represent a count of receive errors + on a particular interface that are not + otherwise counted." + REFERENCE + "IEEE 802.3 Layer Management" + ::= { sDot3StatsEntry 16 } + + sDot3StatsEtherChipSet OBJECT-TYPE + SYNTAX OBJECT IDENTIFIER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object contains an OBJECT IDENTIFIER + which identifies the chipset used to + realize the interface. Ethernet-like + interfaces are typically built out of + several different chips. The MIB implementor + is presented with a decision of which chip + to identify via this object. The implementor + should identify the chip which is usually + called the Medium Access Control chip. + If no such chip is easily identifiable, + the implementor should identify the chip + + + which actually gathers the transmit + and receive statistics and error + indications. This would allow a + manager station to correlate the + statistics and the chip generating + them, giving it the ability to take + into account any known anomalies + in the chip." + ::= { sDot3StatsEntry 17 } + + sDot3StatsSymbolErrors OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "For an interface operating at 100 Mb/s, the + number of times there was an invalid data symbol + when a valid carrier was present. + + For an interface operating in half-duplex mode + at 1000 Mb/s, the number of times the receiving + media is non-idle (a carrier event) for a period + of time equal to or greater than slotTime, and + during which there was at least one occurrence + of an event that causes the PHY to indicate + 'Data reception error' or 'carrier extend error' + on the GMII. + + For an interface operating in full-duplex mode + at 1000 Mb/s, the number of times the receiving + media is non-idle a carrier event) for a period + of time equal to or greater than minFrameSize, + and during which there was at least one + occurrence of an event that causes the PHY to + indicate 'Data reception error' on the GMII. + + The count represented by an instance of this + object is incremented at most once per carrier + event, even if multiple symbol errors occur + during the carrier event. This count does + not increment if a collision is present. + + Discontinuities in the value of this counter can + occur at re-initialization of the management + system, and at other times as indicated by the + value of ifCounterDiscontinuityTime." + REFERENCE + "[IEEE 802.3 Std.], 30.3.2.1.5, + aSymbolErrorDuringCarrier." + ::= { sDot3StatsEntry 18 } + + sDot3StatsDuplexStatus OBJECT-TYPE + SYNTAX INTEGER { + unknown(1), + halfDuplex(2), + fullDuplex(3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current mode of operation of the MAC + entity. 'unknown' indicates that the current + duplex mode could not be determined. + + Management control of the duplex mode is + accomplished through the MAU MIB. When + an interface does not support autonegotiation, + or when autonegotiation is not enabled, the + duplex mode is controlled using + ifMauDefaultType. When autonegotiation is + supported and enabled, duplex mode is controlled + using ifMauAutoNegAdvertisedBits. In either + case, the currently operating duplex mode is + reflected both in this object and in ifMauType. + + Note that this object provides redundant + information with ifMauType. Normally, redundant + objects are discouraged. However, in this + instance, it allows a management application to + determine the duplex status of an interface + without having to know every possible value of + ifMauType. This was felt to be sufficiently + valuable to justify the redundancy." + REFERENCE + "[IEEE 802.3 Std.], 30.3.1.1.32, + aDuplexStatus." + ::= { sDot3StatsEntry 19 } + + +-- +-- sArch Group +-- +-- Needs to be replaced with the 64-bit counters +-- + + sSwitchStatsTable OBJECT-TYPE + SYNTAX SEQUENCE OF SwapiSwitchStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of interface entries. The number of + entries is given by the value of ifNumber." + ::= { sSwitchStatsInfo 1 } + + + sSwitchStatsEntry OBJECT-TYPE + SYNTAX SwapiSwitchStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An interface entry containing objects at the + subnetwork layer and below for a particular + interface." + INDEX { sSwitchPortIndex } + ::= { sSwitchStatsTable 1 } + + SwapiSwitchStatsEntry ::= + SEQUENCE { + sSwitchPortIndex INTEGER, + sSwitchStatsTXOctetsNoErr Counter32, + sSwitchStatsTXPacketsNoErr Counter32, + sSwitchStatsRXOctetsNoErr Counter32, + sSwitchStatsRXPacketsNoErr Counter32 + } + + sSwitchPortIndex OBJECT-TYPE + SYNTAX INTEGER (1..65536) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A unique value, uses linear port number with holes." + ::= { sSwitchStatsEntry 1 } + + sSwitchStatsTXOctetsNoErr OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of octets transmitted from the interface. This + number does not include octets in error." + ::= { sSwitchStatsEntry 2 } + + sSwitchStatsTXPacketsNoErr OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of packets transmitted from the interface. This + number does not include packets in error." + ::= { sSwitchStatsEntry 3 } + + sSwitchStatsRXOctetsNoErr OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of octets received on the interface. This + number does not include octets in error." + ::= { sSwitchStatsEntry 4 } + + sSwitchStatsRXPacketsNoErr OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of packets received on the interface. This + number does not include packets in error." + ::= { sSwitchStatsEntry 5 } + +-- ---------------------------------------------------------------- +-- Conformance groups. This is required by SMIv2 +-- ---------------------------------------------------------------- +sMIBConformance OBJECT IDENTIFIER ::= { bcmSwapi 1 } +sMIBGroups OBJECT IDENTIFIER ::= { sMIBConformance 1 } +sMIBCompliances OBJECT IDENTIFIER ::= { sMIBConformance 2 } + + sMIBDot1dGroup OBJECT-GROUP + OBJECTS { + sDot1dBasePort, + sDot1dBasePortMtuExceededDiscards, + sDot1dStpPort, + sDot1dStpPortState, + sDot1dStpPortEnable, + sDot1dTpLearnedEntryDiscards, + sDot1dTpAgingTime + } + STATUS current + DESCRIPTION + "Swapi dot1d support objects." + ::= { sMIBGroups 3 } + + sMIBRMONGroup OBJECT-GROUP + OBJECTS { + sEtherStatsIndex, + sEtherStatsDropEvents, + sEtherStatsOctets, + sEtherStatsPkts, + sEtherStatsBroadcastPkts, + sEtherStatsMulticastPkts, + sEtherStatsCRCAlignErrors, + sEtherStatsUndersizePkts, + sEtherStatsOversizePkts, + sEtherStatsFragments, + sEtherStatsJabbers, + sEtherStatsCollisions, + sEtherStatsPkts64Octets, + sEtherStatsPkts65to127Octets, + sEtherStatsPkts128to255Octets, + sEtherStatsPkts256to511Octets, + sEtherStatsPkts512to1023Octets, + sEtherStatsPkts1024to1518Octets, + sEtherStatsRXMACControlFrames, + sEtherStatsRXPauseMACCtrlFrames, + sEtherStatsTXPauseMACCtrlFrames, + sEtherStatsBcmIPMCBridgedPckts, + sEtherStatsBcmIPMCRoutedPckts, + sEtherStatsBcmIPMCInDroppedPckts, + sEtherStatsBcmIPMCOutDroppedPckts, + sEtherStatsIfInFrameRate, + sEtherStatsIfInOctetRate, + sEtherStatsIfOutFrameRate, + sEtherStatsIfOutOctetRate + } + STATUS current + DESCRIPTION + "Swapi RMON support objects." + ::= { sMIBGroups 4 } + + sMIBMauGroup OBJECT-GROUP + OBJECTS { + sIfMauIndex, + sIfMauType, + sIfMauMediaAvailable, + sIfMauJabberState, + sIfMauDefaultType, + sIfMauAutoNegAdminStatus, + sIfMauAutoNegRestart, + sIfMauAutoNegCapAdvertisedBits, + sIfMauAutoNegCapReceivedBits + } + STATUS current + DESCRIPTION + "Swapi MAU support objects." + ::= { sMIBGroups 5 } + + sMIBDot1pGroup OBJECT-GROUP + OBJECTS { + sDot1dDeviceCapabilities, + sDot1dTrafficClassesEnabled, + sDot1dGmrpStatus, + sDot1dPortCapabilities, + sDot1dPortDefaultUserPriority, + sDot1dPortNumTrafficClasses, + sDot1dRegenUserPriority, + sDot1dTrafficClass, + sDot1dPortOutboundAccessPriority, + sDot1dPortGmrpStatus + } + STATUS current + DESCRIPTION + "Swapi Dot1p dependent support objects." + ::= { sMIBGroups 6 } + + sMIBDot1QGroup OBJECT-GROUP + OBJECTS { + sDot1qGvrpStatus, + sDot1qFdbDynamicCount, + sDot1qStaticUnicastAllowedToGoTo, + sDot1qStaticMulticastStaticEgressPorts, + sDot1qStaticMulticastStatus, + sDot1qVlanFdbId, + sDot1qForwardUnregisteredPorts, + sDot1qVlanCurrentEgressPorts, + sDot1qVlanCurrentUntaggedPorts, + sDot1qVlanStaticEgressPorts, + sDot1qVlanStaticUntaggedPorts, + sDot1qVlanStaticRowStatus, + sDot1qPvid, + sDot1qPortAcceptableFrameTypes, + sDot1qPortIngressFiltering, + sDot1qPortGvrpStatus + } + STATUS current + DESCRIPTION + "Swapi Dot1Q dependent support objects." + ::= { sMIBGroups 7 } + + sMIBDot3Group OBJECT-GROUP + OBJECTS { + sDot3StatsIndex, + sDot3StatsAlignmentErrors, + sDot3StatsFCSErrors, + sDot3StatsSingleCollisionFrames, + sDot3StatsMultipleCollisionFrames, + sDot3StatsSQETestErrors, + sDot3StatsDeferredTransmissions, + sDot3StatsLateCollisions, + sDot3StatsExcessiveCollisions, + sDot3StatsInternalMacTransmitErrors, + sDot3StatsCarrierSenseErrors, + sDot3StatsFrameTooLongs, + sDot3StatsInternalMacReceiveErrors, + sDot3StatsEtherChipSet + } + STATUS current + DESCRIPTION + "Swapi RFC1643 dependent support objects." + ::= { sMIBGroups 8 } + + sMIBArchGroup OBJECT-GROUP + OBJECTS { + sSwitchPortIndex, + sSwitchStatsTXOctetsNoErr, + sSwitchStatsTXPacketsNoErr, + sSwitchStatsRXOctetsNoErr, + sSwitchStatsRXPacketsNoErr + } + STATUS current + DESCRIPTION + "Swapi architectural dependent support objects." + ::= { sMIBGroups 9 } + + + sMIBCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement for s module." + MODULE + MANDATORY-GROUPS { + sMIBDot1dGroup, + sMIBRMONGroup, + sMIBMauGroup, + sMIBDot1pGroup, + sMIBDot1QGroup, + sMIBDot3Group, + sMIBArchGroup + } + ::= { sMIBCompliances 1 } + + END + -- cgit v1.2.3