From 98a672123c7872f6b9b75a9a2b6bb3aea504de6a Mon Sep 17 00:00:00 2001 From: David Leutgeb Date: Tue, 5 Dec 2023 12:25:34 +0100 Subject: Initial commit --- MIBS/fs/GARP-MIB | 2886 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 2886 insertions(+) create mode 100644 MIBS/fs/GARP-MIB (limited to 'MIBS/fs/GARP-MIB') diff --git a/MIBS/fs/GARP-MIB b/MIBS/fs/GARP-MIB new file mode 100644 index 0000000..5a27190 --- /dev/null +++ b/MIBS/fs/GARP-MIB @@ -0,0 +1,2886 @@ +GARP-MIB DEFINITIONS ::= BEGIN + +-- ------------------------------------------------------------- +-- Internal GARP MIB +-- ------------------------------------------------------------- + +IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, + Counter32, Unsigned32, TimeTicks + FROM SNMPv2-SMI + TimeInterval, RowStatus, TruthValue, DisplayString, + TEXTUAL-CONVENTION, MacAddress + FROM SNMPv2-TC + gbnL2 + FROM ADMIN-MASTER-MIB + MODULE-COMPLIANCE, OBJECT-GROUP + FROM SNMPv2-CONF; + +garpMib MODULE-IDENTITY + LAST-UPDATED "9907060000Z" + ORGANIZATION "admin Systems, Inc." + CONTACT-INFO + "admin Systems" + DESCRIPTION + "GARP Module Management" + +-- revision history + + REVISION "9907060000Z" + DESCRIPTION + "Initial version" + + ::= { gbnL2 2 } + +garpMIBObjects OBJECT IDENTIFIER ::= { garpMib 1 } + +-- ------------------------------------------------------------- +-- Textual Conventions +-- ------------------------------------------------------------- + +EnabledStatus ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "A simple status value for the object." + SYNTAX INTEGER { + enabled(1), disabled(2) } + +TimeFilter ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "To be used for the index to a table. Allows an application + to download only those rows changed since a particular time. + A row is considered changed if the value of any object in the + row changes or if the row is created or deleted. + + When sysUpTime is equal to zero, this table shall be empty. + + One entry exists for each past value of sysUpTime, except that + the whole table is purged should sysUpTime wrap. + + As this basic row is updated new conceptual rows are created + (which still share the now updated object values with all + other instances). The number of instances which are created + is determined by the value of sysUpTime at which the basic row + was last updated. One instance will exist for each value of + sysUpTime at the last update time for the row. A new + timeMark instance is created for each new sysUpTime value. + Each new conceptual row will be associated with the timeMark + instance which was created at the value of sysUpTime with + which the conceptual row is to be associated. + + By definition all conceptual rows were updated at or after + time zero and so at least one conceptual row (associated with + timeMark.0) must exist for each underlying (basic) row. + + See the appendix for further discussion of this variable. + + Consider the following fooTable: + + fooTable ... + INDEX { fooTimeMark, fooIndex } + + FooEntry { + fooTimeMark TimeFilter + fooIndex INTEGER, + fooCounts Counter + } + + Should there be two basic rows in this table (fooIndex == 1, + fooIndex == 2) and row 1 was updated most recently at time 6, + while row 2 was updated most recently at time 8, and both rows + had been updated on several earlier occasions such that the + current values were 5 and 9 respectively then the following + fooCounts instances would exist. + + fooCounts.0.1 5 + fooCounts.0.2 9 + fooCounts.1.1 5 + fooCounts.1.2 9 + fooCounts.2.1 5 + fooCounts.2.2 9 + fooCounts.3.1 5 + fooCounts.3.2 9 + fooCounts.4.1 5 + fooCounts.4.2 9 + fooCounts.5.1 5 + fooCounts.5.2 9 + fooCounts.6.1 5 + fooCounts.6.2 9 + fooCounts.7.2 9 -- note that row 1 doesn't exist for + fooCounts.8.2 9 -- times 7 and 8" + SYNTAX TimeTicks + +PortList ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Each octet within this value specifies a set of eight + ports, with the first octet specifying ports 1 through + 8, the second octet specifying ports 9 through 16, etc. + Within each octet, the most significant bit represents + the lowest numbered port, and the least significant bit + represents the highest numbered port. Thus, each port + of the bridge is represented by a single bit within the + value of this object. If that bit has a value of '1' + then that port is included in the set of ports; the port + is not included if its bit has a value of '0'." + SYNTAX OCTET STRING + +VlanIndex ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "A value used to index per-VLAN tables: values of 0 and + 4095 are not permitted; if the value is between 1 and + 4094 inclusive, it represents an IEEE 802.1Q VLAN-ID with + global scope within a given bridged domain (see VlanId + textual convention). If the value is greater than 4095 + then it represents a VLAN with scope local to the + particular agent, i.e. one without a global VLAN-ID + assigned to it. Such VLANs are outside the scope of + IEEE 802.1Q but it is convenient to be able to manage them + in the same way using this MIB." + SYNTAX Unsigned32 + +VlanId ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "A 12-bit VLAN ID used in the VLAN Tag header." + SYNTAX INTEGER (1..4094) + +-- ------------------------------------------------------------- +-- groups in the GARP MIB +-- ------------------------------------------------------------- + +gDot1qBase OBJECT IDENTIFIER ::= { garpMIBObjects 1 } +gDot1qTp OBJECT IDENTIFIER ::= { garpMIBObjects 2 } +gDot1qStatic OBJECT IDENTIFIER ::= { garpMIBObjects 3 } +gDot1qVlan OBJECT IDENTIFIER ::= { garpMIBObjects 4 } +gDot1dGarp OBJECT IDENTIFIER ::= { garpMIBObjects 5 } +gDot1dGmrp OBJECT IDENTIFIER ::= { garpMIBObjects 6 } +gDot1dExtBase OBJECT IDENTIFIER ::= { garpMIBObjects 7 } +gDot1qExtend OBJECT IDENTIFIER ::= { garpMIBObjects 8 } + +-- ------------------------------------------------------------- + +-- ------------------------------------------------------------- +-- gDot1qBase group +-- ------------------------------------------------------------- + +gDot1qVlanVersionNumber OBJECT-TYPE + SYNTAX INTEGER { + version1(1) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The version number of IEEE 802.1Q that this device + supports." + REFERENCE + "IEEE 802.1Q/D11 Section 12.10.1.1" + DEFVAL { 1 } + ::= { gDot1qBase 1 } + +gDot1qMaxVlanId OBJECT-TYPE + SYNTAX VlanId + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The maximum IEEE 802.1Q VLAN ID that this device + supports." + REFERENCE + "IEEE 802.1Q/D11 Section 9.3.2.3" + ::= { gDot1qBase 2 } + +gDot1qMaxSupportedVlans OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The maximum number of IEEE 802.1Q VLANs that this + device supports." + REFERENCE + "IEEE 802.1Q/D11 Section 12.10.1.1" + ::= { gDot1qBase 3 } + +gDot1qNumVlans OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current number of IEEE 802.1Q VLANs that are + configured in this device." + REFERENCE + "IEEE 802.1Q/D11 Section 12.7.1.1" + ::= { gDot1qBase 4 } + +gDot1qGvrpStatus OBJECT-TYPE + SYNTAX EnabledStatus{ enabled(1), disabled(2) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "DURABLE: { enabled } + The administrative status requested by management for + GVRP. The value enabled(1) indicates that GVRP should + be enabled on this device, on all ports for which it has + not been specifically disabled. When disabled(2), GVRP + is disabled on all ports and all GVRP packets will be + forwarded transparently. This object affects all GVRP + Applicant and Registrar state machines. A transition + from disabled(2) to enabled(1) will cause a reset of all + GVRP state machines on all ports." + DEFVAL { disabled } + ::= { gDot1qBase 5 } + +gDot1qVlanIndexMappingTable OBJECT-TYPE + SYNTAX SEQUENCE OF GarpDot1qVlanIndexMappingEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table gives the mapping of linear indices to + VLAN Indices. It is necessary because CCDGEN doesn't + support nonlinear indices." + REFERENCE + "No reference" + ::= { gDot1qBase 6 } + +gDot1qVlanIndexMappingEntry OBJECT-TYPE + SYNTAX GarpDot1qVlanIndexMappingEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry maps a linear index to a VLAN index." + INDEX { gDot1qVlanSlotIndex } + ::= { gDot1qVlanIndexMappingTable 1 } + +GarpDot1qVlanIndexMappingEntry ::= + SEQUENCE { + gDot1qVlanSlotIndex + INTEGER, + gDot1qVlanSlotActualIndex + VlanIndex + } + +gDot1qVlanSlotIndex OBJECT-TYPE + SYNTAX INTEGER (1..64) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The durable slot index for this VLAN" + ::= { gDot1qVlanIndexMappingEntry 1 } + +gDot1qVlanSlotActualIndex OBJECT-TYPE + SYNTAX VlanIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "DURABLE: { 0:all } + The actual VLAN index for this durable VLAN slot" + ::= { gDot1qVlanIndexMappingEntry 2 } + +-- ------------------------------------------------------------- +-- the gDot1qTp group +-- ------------------------------------------------------------- + +-- ------------------------------------------------------------- +-- the current Filtering Database Table +-- ------------------------------------------------------------- + +gDot1qFdbTable OBJECT-TYPE + SYNTAX SEQUENCE OF GarpDot1qFdbEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that contains configuration and control + information for each Filtering Database currently + operating on this device. Entries in this table appear + automatically when VLANs are assigned FDB IDs in the + gDot1qVlanCurrentTable." + ::= { gDot1qTp 1 } + +gDot1qFdbEntry OBJECT-TYPE + SYNTAX GarpDot1qFdbEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Information about a specific Filtering Database." + INDEX { gDot1qFdbId } + ::= { gDot1qFdbTable 1 } + +GarpDot1qFdbEntry ::= + SEQUENCE { + gDot1qFdbId + Unsigned32, + gDot1qFdbDynamicCount + Counter32 + } + +gDot1qFdbId OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The identity of this Filtering Database." + ::= { gDot1qFdbEntry 1 } + +gDot1qFdbDynamicCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current number of dynamic entries in this + Filtering Database." + REFERENCE + "IEEE 802.1Q/D11 Section 12.7.1.1.3" + ::= { gDot1qFdbEntry 2 } + +-- ------------------------------------------------------------- +-- Multiple Forwarding Databases for 802.1Q Transparent devices +-- This table is an alternative to the dot1dTpFdbTable, +-- previously defined for 802.1D devices which only support a +-- single Forwarding Database. +-- ------------------------------------------------------------- + +gDot1qTpFdbTable OBJECT-TYPE + SYNTAX SEQUENCE OF GarpDot1qTpFdbEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that contains information about unicast entries + for which the device has forwarding and/or filtering + information. This information is used by the + transparent bridging function in determining how to + propagate a received frame." + REFERENCE + "IEEE 802.1Q/D11 Section 12.7.7" + ::= { gDot1qTp 2 } + +gDot1qTpFdbEntry OBJECT-TYPE + SYNTAX GarpDot1qTpFdbEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Information about a specific unicast MAC address for + which the device has some forwarding and/or filtering + information." + INDEX { gDot1qFdbId, gDot1qTpFdbAddress } + ::= { gDot1qTpFdbTable 1 } + +GarpDot1qTpFdbEntry ::= + SEQUENCE { + gDot1qTpFdbAddress + MacAddress, + gDot1qTpFdbPort + INTEGER, + gDot1qTpFdbStatus + INTEGER + } + +gDot1qTpFdbAddress OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A unicast MAC address for which the device has + forwarding and/or filtering information." + ::= { gDot1qTpFdbEntry 1 } + +gDot1qTpFdbPort OBJECT-TYPE + SYNTAX INTEGER (0..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Either the value '0', or the port number of the port on + which a frame having a source address equal to the value + of the corresponding instance of gDot1qTpFdbAddress has + been seen. A value of '0' indicates that the port + number has not been learned but that the device does + have some forwarding/filtering information about this + address (e.g. in the gDot1qStaticUnicastTable). + Implementors are encouraged to assign the port value to + this object whenever it is learned even for addresses + for which the corresponding value of gDot1qTpFdbStatus is + not learned(3)." + ::= { gDot1qTpFdbEntry 2 } + +gDot1qTpFdbStatus OBJECT-TYPE + SYNTAX INTEGER { + other(1), + invalid(2), + learned(3), + self(4), + mgmt(5) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The status of this entry. The meanings of the values + are: + other(1) - none of the following. This may include + the case where some other MIB object (not the + corresponding instance of gDot1qTpFdbPort, nor an + entry in the gDot1qStaticUnicastTable) is being + used to determine if and how frames addressed to + the value of the corresponding instance of + gDot1qTpFdbAddress are being forwarded. + invalid(2) - this entry is no longer valid (e.g., it + was learned but has since aged out), but has not + yet been flushed from the table. + learned(3) - the value of the corresponding instance + of gDot1qTpFdbPort was learned and is being used. + self(4) - the value of the corresponding instance of + gDot1qTpFdbAddress represents one of the device's + addresses. The corresponding instance of + gDot1qTpFdbPort indicates which of the device's + ports has this address. + mgmt(5) - the value of the corresponding instance of + gDot1qTpFdbAddress is also the value of an + existing instance of gDot1qStaticAddress." + ::= { gDot1qTpFdbEntry 3 } +-- ------------------------------------------------------------- +-- Dynamic Group Registration Table +-- ------------------------------------------------------------- + +gDot1qTpGroupTable OBJECT-TYPE + SYNTAX SEQUENCE OF GarpDot1qTpGroupEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table containing filtering information for VLANs + configured into the bridge by (local or network) + management, or learnt dynamically, specifying the set of + ports to which frames received on a VLAN for this FDB + and containing a specific Group destination address are + allowed to be forwarded." + ::= { gDot1qTp 3 } + +gDot1qTpGroupEntry OBJECT-TYPE + SYNTAX GarpDot1qTpGroupEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Filtering information configured into the bridge by + management, or learnt dynamically, specifying the set of + ports to which frames received on a VLAN and containing + a specific Group destination address, are allowed to be + forwarded. The subset of these ports learnt dynamically + is also provided." + INDEX { gDot1qVlanIndex, gDot1qTpGroupAddress } + ::= { gDot1qTpGroupTable 1 } + +GarpDot1qTpGroupEntry ::= + SEQUENCE { + gDot1qTpGroupAddress + MacAddress, + gDot1qTpGroupEgressPorts + PortList, + gDot1qTpGroupLearnt + PortList + } + +gDot1qTpGroupAddress OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The destination Group MAC address in a frame to which + this entry's filtering information applies." + ::= { gDot1qTpGroupEntry 1 } + +gDot1qTpGroupEgressPorts OBJECT-TYPE + SYNTAX PortList + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The complete set of ports, in this VLAN, to which + frames destined for this Group MAC address are currently + being explicitly forwarded. This does not include ports + for which this address is only implicitly forwarded, in + the gDot1qForwardAllPorts list." + ::= { gDot1qTpGroupEntry 2 } + +gDot1qTpGroupLearnt OBJECT-TYPE + SYNTAX PortList + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The subset of ports in gDot1qTpGroupEgressPorts which + were learnt by GMRP or some other dynamic mechanism, in + this Filtering database." + ::= { gDot1qTpGroupEntry 3 } + +-- ------------------------------------------------------------- +-- Service Requirements Group +-- ------------------------------------------------------------- + +gDot1qForwardAllTable OBJECT-TYPE + SYNTAX SEQUENCE OF GarpDot1qForwardAllEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table containing forwarding information for each + VLAN, specifying the set of ports to which forwarding of + all multicasts applies, configured statically by + management or dynamically by GMRP. An entry appears in + this table for all VLANs that are currently + instantiated." + REFERENCE + "IEEE 802.1Q/D11 Section 12.7.2, 12.7.7" + ::= { gDot1qTp 4 } +gDot1qForwardAllEntry OBJECT-TYPE + SYNTAX GarpDot1qForwardAllEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Forwarding information for a VLAN, specifying the set + of ports to which all multicasts should be forwarded, + configured statically by management or dynamically by + GMRP." +-- +-- This table is actually indexed by VLAN ID, however for the purposes +-- of default value table generation, we introduce a phony index of +-- the dimension of the VLAN slot table. +-- +-- INDEX { gDot1qVlanIndex } +-- + INDEX { gDot1qVlanSlotIndex } -- Don't use this index at runtime + ::= { gDot1qForwardAllTable 1 } + +GarpDot1qForwardAllEntry ::= + SEQUENCE { + gDot1qForwardAllPorts + PortList, + gDot1qForwardAllVlanIndex + VlanIndex, + gDot1qForwardAllStaticPorts + PortList, + gDot1qForwardAllForbiddenPorts + PortList + } + +gDot1qForwardAllPorts OBJECT-TYPE + SYNTAX PortList + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The complete set of ports in this VLAN to which all + multicast group-addressed frames are to be forwarded. + This includes ports for which this need has been + determined dynamically by GMRP, or configured statically + by management." + ::= { gDot1qForwardAllEntry 1 } + +gDot1qForwardAllVlanIndex OBJECT-TYPE + SYNTAX VlanIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "DURABLE: { 0:all } + This is here only to allow the VLAN index to be saved along + with the corresponding forward all table entry." + ::= { gDot1qForwardAllEntry 2 } + +gDot1qForwardAllStaticPorts OBJECT-TYPE + SYNTAX PortList + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "DURABLE: { 0:all } + The set of ports configured by management in this VLAN + to which all multicast group-addressed frames are to be + forwarded. Ports entered in this list will also appear + in the complete set shown by gDot1qForwardAllPorts. This + value will be restored after the device is reset. This + only applies to ports that are members of the VLAN, + defined by gDot1qVlanCurrentEgressPorts. A port may not + be added in this set if it is already a member of the + set of ports in gDot1qForwardAllForbiddenPorts. The + default value is a string of ones of appropriate length, + to indicate standard non-EFS behaviour, i.e. forward + all multicasts to all ports." + ::= { gDot1qForwardAllEntry 3 } + +gDot1qForwardAllForbiddenPorts OBJECT-TYPE + SYNTAX PortList + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "DURABLE: { 0:all } + The set of ports configured by management in this VLAN + for which the Service Requirement attribute Forward All + Multicast Groups may not be dynamically registered by + GMRP. This value will be restored after the device is + reset. A port may not be added in this set if it is + already a member of the set of ports in + gDot1qForwardAllStaticPorts. The default value is a + string of zeros of appropriate length." + ::= { gDot1qForwardAllEntry 4 } + +gDot1qForwardUnregisteredTable OBJECT-TYPE + SYNTAX SEQUENCE OF GarpDot1qForwardUnregisteredEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table containing forwarding information for each + VLAN, specifying the set of ports to which forwarding of + multicast group-addressed frames for which there is no + more specific forwarding information applies. This is + configured statically by management and determined + dynamically by GMRP. An entry appears in this table for + all VLANs that are currently instantiated." + REFERENCE + "IEEE 802.1Q/D11 Section 12.7.2, 12.7.7" + ::= { gDot1qTp 5 } + +gDot1qForwardUnregisteredEntry OBJECT-TYPE + SYNTAX GarpDot1qForwardUnregisteredEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Forwarding information for a VLAN, specifying the set + of ports to which all multicasts for which there is no + more specific forwarding information shall be forwarded. + This is configured statically by management or + dynamically by GMRP." +-- +-- This table is actually indexed by VLAN ID, however for the purposes +-- of default value table generation, we introduce a phony index of +-- the dimension of the VLAN slot table. +-- +-- INDEX { gDot1qVlanIndex } +-- + INDEX { gDot1qVlanSlotIndex } -- Don't use this index at runtime + ::= { gDot1qForwardUnregisteredTable 1 } + +GarpDot1qForwardUnregisteredEntry ::= + SEQUENCE { + gDot1qForwardUnregisteredPorts + PortList, + gDot1qForwardUnregisteredVlanIndex + VlanIndex, + gDot1qForwardUnregisteredStaticPorts + PortList, + gDot1qForwardUnregisteredForbiddenPorts + PortList + } + +gDot1qForwardUnregisteredPorts OBJECT-TYPE + SYNTAX PortList + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The complete set of ports in this VLAN to which + multicast group-addressed frames for which there is no + more specific forwarding information will be forwarded. + This includes ports for which this need has been + determined dynamically by GMRP, or configured statically + by management." + ::= { gDot1qForwardUnregisteredEntry 1 } + +gDot1qForwardUnregisteredVlanIndex OBJECT-TYPE + SYNTAX VlanIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "DURABLE: { 0:all } + This is here only to allow the VLAN index to be saved along + with the corresponding forward unregistered table entry." + ::= { gDot1qForwardUnregisteredEntry 2 } + +gDot1qForwardUnregisteredStaticPorts OBJECT-TYPE + SYNTAX PortList + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "DURABLE: { 0:all } + The set of ports configured by management, in this + VLAN, to which multicast group-addressed frames for + which there is no more specific forwarding information + are to be forwarded. Ports entered in this list will + also appear in the complete set shown by + gDot1qForwardUnregisteredPorts. This value will be + restored after the device is reset. A port may not be + added in this set if it is already a member of the set + of ports in gDot1qForwardUnregisteredForbiddenPorts. The + default value is a string of zeros of appropriate + length, although this has no effect with the default + value of gDot1qForwardAllStaticPorts." + ::= { gDot1qForwardUnregisteredEntry 3 } + +gDot1qForwardUnregisteredForbiddenPorts OBJECT-TYPE + SYNTAX PortList + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "DURABLE: { 0:all } + The set of ports configured by management in this VLAN + for which the Service Requirement attribute Forward + Unregistered Multicast Groups may not be dynamically + registered by GMRP. This value will be restored after + the device is reset. A port may not be added in this + set if it is already a member of the set of ports in + gDot1qForwardUnregisteredStaticPorts. The default value + is a string of zeros of appropriate length." + ::= { gDot1qForwardUnregisteredEntry 4 } + +-- ------------------------------------------------------------- +-- The Static (Destination-Address Filtering) Database +-- ------------------------------------------------------------- + +gDot1qStaticUnicastTable OBJECT-TYPE + SYNTAX SEQUENCE OF GarpDot1qStaticUnicastEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table containing filtering information for Unicast + MAC addresses for each Filtering Database, configured + into the device by (local or network) management + specifying the set of ports to which frames received + from specific ports and containing specific unicast + destination addresses are allowed to be forwarded. A + value of zero in this table as the port number from + which frames with a specific destination address are + received, is used to specify all ports for which there + is no specific entry in this table for that particular + destination address. Entries are valid for unicast + addresses only." + REFERENCE + "IEEE 802.1Q/D11 Section 12.7.7, + ISO/IEC 15802-3 Section 7.9.1" + ::= { gDot1qStatic 1 } + +gDot1qStaticUnicastEntry OBJECT-TYPE + SYNTAX GarpDot1qStaticUnicastEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Filtering information configured into the device by + (local or network) management specifying the set of + ports to which frames received from a specific port and + containing a specific unicast destination address are + allowed to be forwarded." + INDEX { + gDot1qFdbId, + gDot1qStaticUnicastAddress, + gDot1qStaticUnicastReceivePort + } + ::= { gDot1qStaticUnicastTable 1 } + +GarpDot1qStaticUnicastEntry ::= + SEQUENCE { + gDot1qStaticUnicastAddress + MacAddress, + gDot1qStaticUnicastReceivePort + INTEGER, + gDot1qStaticUnicastAllowedToGoTo + PortList, + gDot1qStaticUnicastStatus + INTEGER + } + +gDot1qStaticUnicastAddress OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The destination MAC address in a frame to which this + entry's filtering information applies. This object must + take the value of a unicast address." + ::= { gDot1qStaticUnicastEntry 1 } + +gDot1qStaticUnicastReceivePort OBJECT-TYPE + SYNTAX INTEGER (0..65535) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Either the value '0', or the port number of the port + from which a frame must be received in order for this + entry's filtering information to apply. A value of zero + indicates that this entry applies on all ports of the + device for which there is no other applicable entry." + ::= { gDot1qStaticUnicastEntry 2 } + +gDot1qStaticUnicastAllowedToGoTo OBJECT-TYPE + SYNTAX PortList + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The set of ports for which a frame with a specific + unicast address will be flooded in the event that it + has not been learned. It also specifies the set of + ports a specific unicast address may be dynamically + learnt on. The gDot1qTpFdbTable will have an equivalent + entry with a gDot1qTpFdbPort value of '0' until this + address has been learnt, when it will be updated with + the port the address has been seen on. This only + applies to ports that are members of the VLAN, defined + by gDot1qVlanCurrentEgressPorts. The default value of + this object is a string of ones of appropriate length." + REFERENCE + "IEEE 802.1Q/D11 Table 8-5, ISO/IEC 15802-3 Table 7-5" + ::= { gDot1qStaticUnicastEntry 3 } + +gDot1qStaticUnicastStatus OBJECT-TYPE + SYNTAX INTEGER { + other(1), + invalid(2), + permanent(3), + deleteOnReset(4), + deleteOnTimeout(5) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object indicates the status of this entry. + other(1) - this entry is currently in use but + the conditions under which it will remain + so differ from the following values. + invalid(2) - writing this value to the object + removes the corresponding entry. + permanent(3) - this entry is currently in use + and will remain so after the next reset of + the bridge. + deleteOnReset(4) - this entry is currently in + use and will remain so until the next + reset of the bridge. + deleteOnTimeout(5) - this entry is currently in + use and will remain so until it is aged out." + DEFVAL { permanent } + ::= { gDot1qStaticUnicastEntry 4 } + +gDot1qStaticMulticastTable OBJECT-TYPE + SYNTAX SEQUENCE OF GarpDot1qStaticMulticastEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table containing filtering information for Multicast + and Broadcast MAC addresses for each VLAN, configured + into the device by (local or network) management + specifying the set of ports to which frames received + from specific ports and containing specific Multicast + and Broadcast destination addresses are allowed to be + forwarded. A value of zero in this table as the port + number from which frames with a specific destination + address are received, is used to specify all ports for + which there is no specific entry in this table for that + particular destination address. Entries are valid for + Multicast and Broadcast addresses only." + REFERENCE + "IEEE 802.1Q/D11 Section 12.7.7, + ISO/IEC 15802-3 Section 7.9.1" + ::= { gDot1qStatic 2 } + +gDot1qStaticMulticastEntry OBJECT-TYPE + SYNTAX GarpDot1qStaticMulticastEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Filtering information configured into the device by + (local or network) management specifying the set of + ports to which frames received from this specific port + for this VLAN and containing this Multicast or Broadcast + destination address are allowed to be forwarded." + INDEX { + gDot1qVlanIndex, + gDot1qStaticMulticastAddress, + gDot1qStaticMulticastReceivePort + } + ::= { gDot1qStaticMulticastTable 1 } + +GarpDot1qStaticMulticastEntry ::= + SEQUENCE { + gDot1qStaticMulticastVlanIndex + VlanIndex, + gDot1qStaticMulticastAddress + MacAddress, + gDot1qStaticMulticastReceivePort + INTEGER, + gDot1qStaticMulticastStaticEgressPorts + PortList, + gDot1qStaticMulticastForbiddenEgressPorts + PortList, + gDot1qStaticMulticastStatus + INTEGER, + gDot1qGmrpLearningPermit + INTEGER + } + +gDot1qStaticMulticastVlanIndex OBJECT-TYPE + SYNTAX VlanIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "DURABLE: { 0:all } + This is here to allow the VLAN Index to be saved along with + the corresponding multicast table entry." + ::= { gDot1qStaticMulticastEntry 1 } + +gDot1qStaticMulticastAddress OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "DURABLE: { 0:all} + The destination MAC address in a frame to which this + entry's filtering information applies. This object must + take the value of a Multicast or Broadcast address." + ::= { gDot1qStaticMulticastEntry 2 } + +gDot1qStaticMulticastReceivePort OBJECT-TYPE + SYNTAX INTEGER (0..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "DURABLE: { 0:all } + Either the value '0', or the port number of the port + from which a frame must be received in order for this + entry's filtering information to apply. A value of zero + indicates that this entry applies on all ports of the + device for which there is no other applicable entry." + ::= { gDot1qStaticMulticastEntry 3 } + +gDot1qStaticMulticastStaticEgressPorts OBJECT-TYPE + SYNTAX PortList + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "DURABLE: { 0:all } + The set of ports to which frames received from a + specific port and destined for a specific Multicast or + Broadcast MAC address must be forwarded, regardless of + any dynamic information e.g. from GMRP. A port may not + be added in this set if it is already a member of the + set of ports in gDot1qStaticMulticastForbiddenEgressPorts. + The default value of this object is a string of ones of + appropriate length." + ::= { gDot1qStaticMulticastEntry 4 } + +gDot1qStaticMulticastForbiddenEgressPorts OBJECT-TYPE + SYNTAX PortList + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "DURABLE: { 0:all } + The set of ports to which frames received from a + specific port and destined for a specific Multicast or + Broadcast MAC address must not be forwarded, regardless + of any dynamic information e.g. from GMRP. A port may + not be added in this set if it is already a member of the + set of ports in gDot1qStaticMulticastStaticEgressPorts. + The default value of this object is a string of zeros of + appropriate length." + ::= { gDot1qStaticMulticastEntry 5 } + +gDot1qStaticMulticastStatus OBJECT-TYPE + SYNTAX INTEGER { + other(1), + invalid(2), + permanent(3), + deleteOnReset(4), + deleteOnTimeout(5) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "DURABLE: { 0:all } + This object indicates the status of this entry. + other(1) - this entry is currently in use but + the conditions under which it will remain + so differ from the following values. + invalid(2) - writing this value to the object + removes the corresponding entry. + permanent(3) - this entry is currently in use + and will remain so after the next reset of + the bridge. + deleteOnReset(4) - this entry is currently in + use and will remain so until the next + reset of the bridge. + deleteOnTimeout(5) - this entry is currently in + use and will remain so until it is aged out." + DEFVAL { permanent } + ::= { gDot1qStaticMulticastEntry 6 } + +gDot1qGmrpLearningPermit OBJECT-TYPE + SYNTAX INTEGER { + gmrpLearningEnable(1), + gmrpLearningDisable(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object is used to add a mcast to garp so that other devices can learn it." + ::= { gDot1qStaticMulticastEntry 7 } + +-- ------------------------------------------------------------- +-- The Current VLAN Database +-- ------------------------------------------------------------- + +gDot1qVlanNumDeletes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of times a VLAN entry has been deleted from + the gDot1qVlanCurrentTable (for any reason). If an entry + is deleted, then inserted, and then deleted, this + counter will be incremented by 2." + ::= { gDot1qVlan 1 } + +gDot1qVlanCurrentTable OBJECT-TYPE + SYNTAX SEQUENCE OF GarpDot1qVlanCurrentEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table containing current configuration information + for each VLAN currently configured into the device by + (local or network) management, or dynamically created + as a result of GVRP requests received." + ::= { gDot1qVlan 2 } + +gDot1qVlanCurrentEntry OBJECT-TYPE + SYNTAX GarpDot1qVlanCurrentEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Information for a VLAN configured into the device by + (local or network) management, or dynamically created + as a result of GVRP requests received." + INDEX { gDot1qVlanTimeMark, gDot1qVlanIndex } + ::= { gDot1qVlanCurrentTable 1 } + +GarpDot1qVlanCurrentEntry ::= + SEQUENCE { + gDot1qVlanTimeMark + TimeFilter, + gDot1qVlanIndex + VlanIndex, + gDot1qVlanFdbId + Unsigned32, + gDot1qVlanCurrentEgressPorts + PortList, + gDot1qVlanCurrentUntaggedPorts + PortList, + gDot1qVlanStatus + INTEGER, + gDot1qVlanCreationTime + TimeTicks + } + +gDot1qVlanTimeMark OBJECT-TYPE + SYNTAX TimeFilter + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A TimeFilter for this entry. See the TimeFilter + textual convention to see how this works." + ::= { gDot1qVlanCurrentEntry 1 } + +gDot1qVlanIndex OBJECT-TYPE + SYNTAX VlanIndex + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The VLAN-ID or other identifier refering to this VLAN." + ::= { gDot1qVlanCurrentEntry 2 } + +gDot1qVlanFdbId OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Filtering Database used by this VLAN. This is one + of the gDot1qFdbId values in the gDot1qFdbTable. This + value is allocated automatically by the device whenever + the VLAN is created: either dynamically by GVRP, or by + management, in gDot1qVlanStaticTable. Allocation of this + value follows the learning constraints defined for this + VLAN in gDot1qLearningConstraintsTable." + ::= { gDot1qVlanCurrentEntry 3 } + +gDot1qVlanCurrentEgressPorts OBJECT-TYPE + SYNTAX PortList + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The set of ports which are transmitting traffic for + this VLAN as either tagged or untagged frames." + REFERENCE + "IEEE 802.1Q/D11 Section 12.10.2.1" + ::= { gDot1qVlanCurrentEntry 4 } + +gDot1qVlanCurrentUntaggedPorts OBJECT-TYPE + SYNTAX PortList + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The set of ports which are transmitting traffic for + this VLAN as untagged frames." + REFERENCE + "IEEE 802.1Q/D11 Section 12.10.2.1" + ::= { gDot1qVlanCurrentEntry 5 } + +gDot1qVlanStatus OBJECT-TYPE + SYNTAX INTEGER { + other(1), + permanent(2), + dynamicGvrp(3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object indicates the status of this entry. + other(1) - this entry is currently in use but the + conditions under which it will remain so differ + from the following values. + permanent(2) - this entry, corresponding to an entry + in gDot1qVlanStaticTable, is currently in use and + will remain so after the next reset of the + device. The port lists for this entry include + ports from the equivalent gDot1qVlanStaticTable + entry and ports learnt dynamically. + dynamicGvrp(3) - this entry is currently in use + and will remain so until removed by GVRP. There + is no static entry for this VLAN and it will be + removed when the last port leaves the VLAN." + ::= { gDot1qVlanCurrentEntry 6 } + +gDot1qVlanCreationTime OBJECT-TYPE + SYNTAX TimeTicks + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime when this VLAN was created." + ::= { gDot1qVlanCurrentEntry 7 } + +-- ------------------------------------------------------------- +-- The Static VLAN Database +-- ------------------------------------------------------------- + +gDot1qVlanStaticTable OBJECT-TYPE + SYNTAX SEQUENCE OF GarpDot1qVlanStaticEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table containing static configuration information for + each VLAN configured into the device by (local or + network) management. All entries are permanent and will + be restored after the device is reset." + ::= { gDot1qVlan 3 } + +gDot1qVlanStaticEntry OBJECT-TYPE + SYNTAX GarpDot1qVlanStaticEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Static information for a VLAN configured into the + device by (local or network) management." +-- +-- This table is actually indexed by VLAN ID, however for the purposes +-- of default value table generation, we introduce a phony index of +-- the dimension of the VLAN slot table. +-- +-- INDEX { gDot1qVlanIndex } +-- + INDEX { gDot1qVlanSlotIndex } -- Don't use this index at runtime + ::= { gDot1qVlanStaticTable 1 } + +GarpDot1qVlanStaticEntry ::= + SEQUENCE { + gDot1qVlanStaticName + DisplayString, +-- SnmpAdminString, + gDot1qVlanStaticEgressPorts + PortList, + gDot1qVlanForbiddenEgressPorts + PortList, + gDot1qVlanStaticUntaggedPorts + PortList, + gDot1qVlanStaticRowStatus + RowStatus, + gDot1qGvrpLearningPermit + INTEGER, + gDot1qVlanSpanningTreeGroup + INTEGER + + } + +gDot1qVlanStaticName OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..32)) +-- SYNTAX SnmpAdminString (SIZE (0..32)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "DURABLE: { 'Default' } + An administratively assigned string, which may be used + to identify the VLAN." + REFERENCE + "IEEE 802.1Q/D11 Section 12.10.2.1" + ::= { gDot1qVlanStaticEntry 1 } + +gDot1qVlanStaticEgressPorts OBJECT-TYPE + SYNTAX PortList + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "DURABLE: { 0:all } + The set of ports which are permanently assigned to the + egress list for this VLAN by management. Changes to a + bit in this object affect the per-port per-VLAN + Registrar control for Registration Fixed for the + relevant GVRP state machine on each port. A port may + not be added in this set if it is already a member of + the set of ports in gDot1qVlanForbiddenEgressPorts. The + default value of this object is a string of zeros of + appropriate length, indicating not fixed." + REFERENCE + "IEEE 802.1Q/D11 Section 12.7.7.3, 11.2.3.2.3" + ::= { gDot1qVlanStaticEntry 2 } + +gDot1qVlanForbiddenEgressPorts OBJECT-TYPE + SYNTAX PortList + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "DURABLE: { 0:all } + The set of ports which are prohibited by management + from being included in the egress list for this VLAN. + Changes to this object that cause a port to be included + or excluded affect the per-port per-VLAN Registrar + control for Registration Forbidden for the relevant GVRP + state machine on each port. A port may not be added in + this set if it is already a member of the set of ports + in gDot1qVlanStaticEgressPorts. The default value of + this object is a string of zeros of appropriate length, + excluding all ports from the forbidden set." + REFERENCE + "IEEE 802.1Q/D11 Section 12.7.7.3, 11.2.3.2.3" + ::= { gDot1qVlanStaticEntry 3 } + +gDot1qVlanStaticUntaggedPorts OBJECT-TYPE + SYNTAX PortList + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "DURABLE: { 0:all } + The set of ports which should transmit egress packets + for this VLAN as untagged. The default value of this + object for the default VLAN (gDot1qVlanIndex = 1) is a string + of appropriate length including all ports. There is no + specified default for other VLANs. If a device agent cannot + support the set of ports being set then it will reject the + set operation with an error. An example might be if a + manager attempts to set more than one VLAN to be untagged + on egress where the device does not support this IEEE 802.1Q + option." + REFERENCE + "IEEE 802.1Q/D11 Section 12.10.2.1" + ::= { gDot1qVlanStaticEntry 4 } + +gDot1qVlanStaticRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object indicates the status of this entry." + ::= { gDot1qVlanStaticEntry 5 } + +gDot1qGvrpLearningPermit OBJECT-TYPE + SYNTAX INTEGER { + gvrpLearningEnable(1), + gvrpLearningDisable(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object is used to add a vlan to garp so that other devices can learn it." + --将一个vlan加入到garp中以允许其他交换机学习该vlan + ::= { gDot1qVlanStaticEntry 6 } + +gDot1qVlanSpanningTreeGroup OBJECT-TYPE + SYNTAX INTEGER (0..15) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object is used to Get/Set current vlan's spanning-tree group num" + --用于获取/设置vlan的生成树组 + ::= { gDot1qVlanStaticEntry 7 } + +gDot1qNextFreeLocalVlanIndex OBJECT-TYPE + SYNTAX INTEGER (0|4096..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The next available value for gDot1qVlanIndex of a local + VLAN entry in gDot1qVlanStaticTable. This will report + values >=4096 if a new Local VLAN may be created or else + the value 0 if this is not possible. + + A row creation operation in this table for an entry with a local + VlanIndex value may fail if the current value of this object + is not used as the index. Even if the value read is used, + there is no guarantee that it will still be the valid index + when the create operation is attempted - another manager may + have already got in during the intervening time interval. + In this case, gDot1qNextFreeLocalVlanIndex should be re-read + and the creation re-tried with the new value. + + This value will automatically change when the current value is + used to create a new row." + ::= { gDot1qVlan 4 } + +-- ------------------------------------------------------------- +-- The VLAN Port Configuration Table +-- ------------------------------------------------------------- + +gDot1qPortVlanTable OBJECT-TYPE + SYNTAX SEQUENCE OF GarpDot1qPortVlanEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table containing per port control and status + information for VLAN configuration in the device." + ::= { gDot1qVlan 5 } + +gDot1qPortVlanEntry OBJECT-TYPE + SYNTAX GarpDot1qPortVlanEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Information controlling VLAN configuration for a port + on the device. This is indexed by dot1dBasePort." + INDEX { gDot1dPortGmrp } + ::= { gDot1qPortVlanTable 1 } + +GarpDot1qPortVlanEntry ::= + SEQUENCE { + gDot1qPvid + VlanIndex, + gDot1qPortAcceptableFrameTypes + INTEGER, + gDot1qPortIngressFiltering + TruthValue, + gDot1qPortGvrpStatus + EnabledStatus, + gDot1qPortGvrpFailedRegistrations + Counter32, + gDot1qPortGvrpLastPduOrigin + MacAddress + } + +gDot1qPvid OBJECT-TYPE + SYNTAX VlanIndex + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "DURABLE: { 1:all } + The PVID, the VLAN ID assigned to untagged frames or + Prority-Tagged frames received on this port." + REFERENCE + "IEEE 802.1Q/D11 Section 12.10.1.1" + DEFVAL { 1 } + ::= { gDot1qPortVlanEntry 1 } + +gDot1qPortAcceptableFrameTypes OBJECT-TYPE + SYNTAX INTEGER { + admitAll(1), + admitOnlyVlanTagged(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "DURABLE: { 1:all } + When this is admitOnlyVlanTagged(2) the device will + discard untagged frames or Prority-Tagged frames + received on this port. When admitAll(1), untagged + frames or Prority-Tagged frames received on this port + will be accepted and assigned to the PVID for this port. + + This control does not affect VLAN independent BPDU + frames, such as GVRP and STP. It does affect VLAN + dependent BPDU frames, such as GMRP." + REFERENCE + "IEEE 802.1Q/D11 Section 12.10.1.3" + DEFVAL { admitAll } + ::= { gDot1qPortVlanEntry 2 } + +gDot1qPortIngressFiltering OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "DURABLE: {1:all} + When this is true(1) the device will discard incoming + frames for VLANs which do not include this Port in its + Member set. When false(2), the port will accept all + incoming frames. + + This control does not affect VLAN independent BPDU + frames, such as GVRP and STP. It does affect VLAN + dependent BPDU frames, such as GMRP." + REFERENCE + "IEEE 802.1Q/D11 Section 12.10.1.4" + DEFVAL { false } + ::= { gDot1qPortVlanEntry 3 } + +gDot1qPortGvrpStatus OBJECT-TYPE + SYNTAX EnabledStatus { enabled(1), disabled(2) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "DURABLE: {enabled:all} + The state of GVRP operation on this port. The value + enabled(1) indicates that GVRP is enabled on this port, + as long as gDot1qGvrpStatus is also enabled for this + device. When disabled(2) but gDot1qGvrpStatus is still + enabled for the device, GVRP is disabled on this port: + any GVRP packets received will be silently discarded and + no GVRP registrations will be propagated from other + ports. This object affects all GVRP Applicant and + Registrar state machines on this port. A transition + from disabled(2) to enabled(1) will cause a reset of all + GVRP state machines on this port." + DEFVAL { disabled } + ::= { gDot1qPortVlanEntry 4 } + +gDot1qPortGvrpFailedRegistrations OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of failed GVRP registrations, for any + reason, on this port." + ::= { gDot1qPortVlanEntry 5 } + +gDot1qPortGvrpLastPduOrigin OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Source MAC Address of the last GVRP message + received on this port." + ::= { gDot1qPortVlanEntry 6 } + +-- ------------------------------------------------------------- +-- The GARP Port Table +-- ------------------------------------------------------------- + +gDot1dPortGarpTable OBJECT-TYPE + SYNTAX SEQUENCE OF GarpDot1dPortGarpEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table of GARP control information about every bridge + port. This is indexed by gDot1qBasePort." + ::= { gDot1dGarp 1 } + +gDot1dPortGarpEntry OBJECT-TYPE + SYNTAX GarpDot1dPortGarpEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "GARP control information for a bridge port." + INDEX { gDot1dPortGmrp } + ::= { gDot1dPortGarpTable 1 } + +GarpDot1dPortGarpEntry ::= + SEQUENCE { + gDot1dPortEnable + INTEGER, + gDot1dPortGarpJoinTime + TimeInterval, + gDot1dPortGarpLeaveTime + TimeInterval, + gDot1dPortGarpLeaveAllTime + TimeInterval + } + +gDot1dPortEnable OBJECT-TYPE + SYNTAX INTEGER { + enabled(1), + disabled(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The enabled/disabled status of the port for all + GARP protocol instances. This should be set + according to the current link state of the port" + REFERENCE + "IEEE 802.1D-1990: Section 4.5.5.2" + ::= { gDot1dPortGarpEntry 1 } + +gDot1dPortGarpJoinTime OBJECT-TYPE + SYNTAX TimeInterval + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "DURABLE: { 20:all } + The GARP Join time, in centiseconds." + DEFVAL { 20 } + ::= { gDot1dPortGarpEntry 2 } + +gDot1dPortGarpLeaveTime OBJECT-TYPE + SYNTAX TimeInterval + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "DURABLE: { 60:all } + The GARP Leave time, in centiseconds." + DEFVAL { 60 } + ::= { gDot1dPortGarpEntry 3 } + +gDot1dPortGarpLeaveAllTime OBJECT-TYPE + SYNTAX TimeInterval + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "DURABLE: { 1000:all } + The GARP LeaveAll time, in centiseconds." + DEFVAL { 1000 } + ::= { gDot1dPortGarpEntry 4 } + +gDot1dGmrpStatus OBJECT-TYPE + SYNTAX EnabledStatus { enabled(1), disabled(2) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "DURABLE: { enabled } + The administrative status requested by management for + GMRP. The value enabled(1) indicates that GMRP should + be enabled on this device, in all VLANs, on all ports + for which it has not been specifically disabled. When + disabled(2), GMRP is disabled, in all VLANs, on all + ports and all GMRP packets will be forwarded + transparently. This object affects both Applicant and + Registrar state machines. A transition from disabled(2) + to enabled(1) will cause a reset of all GMRP state + machines on all ports." + DEFVAL { disabled } + ::= { gDot1dExtBase 1 } + +-- ------------------------------------------------------------- +-- The GMRP Port Configuration and Status Table +-- ------------------------------------------------------------- + +gDot1dPortGmrpTable OBJECT-TYPE + SYNTAX SEQUENCE OF GarpDot1dPortGmrpEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table of GMRP control and status information about + every bridge port. Augments the gDot1qBasePortTable." + ::= { gDot1dGmrp 1 } + +gDot1dPortGmrpEntry OBJECT-TYPE + SYNTAX GarpDot1dPortGmrpEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "GMRP control and status information for a bridge port." + INDEX { gDot1dPortGmrp } + ::= { gDot1dPortGmrpTable 1 } + +GarpDot1dPortGmrpEntry ::= + SEQUENCE { + gDot1dPortGmrp + INTEGER, + gDot1dPortGmrpStatus + EnabledStatus, + gDot1dPortGmrpFailedRegistrations + Counter32, + gDot1dPortGmrpLastPduOrigin + MacAddress + } + +gDot1dPortGmrp OBJECT-TYPE + SYNTAX INTEGER (1..128) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The port number of the port for which this entry + contains GMRP management information." + REFERENCE + "IEEE 802.1D-1990: Section 6.8.2.1.2" + ::= { gDot1dPortGmrpEntry 1 } + +gDot1dPortGmrpStatus OBJECT-TYPE + SYNTAX EnabledStatus { enabled(1), disabled(2) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "DURABLE: { enabled:all } + The administrative state of GMRP operation on this port. The + value enabled(1) indicates that GMRP is enabled on this port + in all VLANs as long as garpGmrpStatus is also enabled(1). + A value of disabled(2) indicates that GMRP is disabled on this + port in all VLANs: any GMRP packets received will + be silently discarded and no GMRP registrations will be + propagated from other ports. Setting this to a value of + enabled(1) will be stored by the agent but will only take effect + on the GMRP protocol operation if garpGmrpStatus also + indicates the value enabled(1). This object affects all + GMRP Applicant and Registrar state machines on this + port. A transition from disabled(2) to enabled(1) will + cause a reset of all GMRP state machines on this port." + DEFVAL { disabled } + ::= { gDot1dPortGmrpEntry 2 } + +gDot1dPortGmrpFailedRegistrations OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of failed GMRP registrations, for any + reason, in all VLANs, on this port." + ::= { gDot1dPortGmrpEntry 3 } + +gDot1dPortGmrpLastPduOrigin OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Source MAC Address of the last GMRP message + received on this port." + ::= { gDot1dPortGmrpEntry 4 } + + +-- ------------------------------------------------------------- +-- The VLAN Learning Constraints Table +-- ------------------------------------------------------------- + +gDot1qLearningConstraintsTable OBJECT-TYPE + SYNTAX SEQUENCE OF GarpDot1qLearningConstraintsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table containing learning constraints for sets of + Shared and Independendent VLANs." + REFERENCE + "IEEE 802.1Q/D11 Section 12.10.3.1" + ::= { gDot1qVlan 6 } + +gDot1qLearningConstraintsEntry OBJECT-TYPE + SYNTAX GarpDot1qLearningConstraintsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A learning constraint defined for a VLAN." + INDEX { gDot1qConstraintVlan, gDot1qConstraintSet } + ::= { gDot1qLearningConstraintsTable 1 } + +GarpDot1qLearningConstraintsEntry ::= + SEQUENCE { + gDot1qConstraintVlan + VlanIndex, + gDot1qConstraintSet + INTEGER, + gDot1qConstraintType + INTEGER, + gDot1qConstraintStatus + RowStatus + } + +gDot1qConstraintVlan OBJECT-TYPE + SYNTAX VlanIndex + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The index of the row in gDot1qVlanCurrentTable for the + VLAN constrained by this entry." + ::= { gDot1qLearningConstraintsEntry 1 } + +gDot1qConstraintSet OBJECT-TYPE + SYNTAX INTEGER (0..65535) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The identity of the constraint set to which + gDot1qConstraintVlan belongs. These values may be chosen + by the management station." + ::= { gDot1qLearningConstraintsEntry 2 } + +gDot1qConstraintType OBJECT-TYPE + SYNTAX INTEGER { + independent(1), + shared(2) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The type of constraint this entry defines. + independent(1) - the VLAN, gDot1qConstraintVlan, + uses an independent filtering database from all + other VLANs in the same set, defined by + gDot1qConstraintSet. + shared(2) - the VLAN, gDot1qConstraintVlan, shares + the same filtering database as all other VLANs + in the same set, defined by gDot1qConstraintSet." + ::= { gDot1qLearningConstraintsEntry 3 } + +gDot1qConstraintStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The status of this entry." + ::= { gDot1qLearningConstraintsEntry 4 } + +gDot1qConstraintSetDefault OBJECT-TYPE + SYNTAX INTEGER (0..65535) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The identity of the constraint set to which a VLAN + belongs, if there is not an explicit entry for that VLAN + in gDot1qLearningConstraintsTable." + ::= { gDot1qVlan 7 } + +gDot1qConstraintTypeDefault OBJECT-TYPE + SYNTAX INTEGER { + independent(1), + shared(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The type of constraint set to which a VLAN belongs, if + there is not an explicit entry for that VLAN in + gDot1qLearningConstraintsTable. The types are as defined + for gDot1qConstraintType." + ::= { gDot1qVlan 8 } + +-- ------------------------------------------------------------- +-- GARP MIB - Conformance Information +-- ------------------------------------------------------------- + +garpMIBConformance OBJECT IDENTIFIER ::= { garpMib 2 } +garpMIBGroups OBJECT IDENTIFIER ::= { garpMIBConformance 1 } +garpMIBCompliances OBJECT IDENTIFIER + ::= { garpMIBConformance 2 } + +-- ------------------------------------------------------------- +-- units of conformance +-- ------------------------------------------------------------- + +garpMIBBaseGroup OBJECT-GROUP + OBJECTS { + gDot1qVlanVersionNumber, + gDot1qMaxVlanId, + gDot1qMaxSupportedVlans, + gDot1qNumVlans, + gDot1qGvrpStatus, + gDot1qFdbDynamicCount, + gDot1qTpFdbPort, + gDot1qTpFdbStatus, + gDot1qTpGroupEgressPorts, + gDot1qTpGroupLearnt, + gDot1qForwardAllPorts, + gDot1qForwardAllStaticPorts, + gDot1qForwardAllForbiddenPorts, + gDot1qForwardUnregisteredPorts, + gDot1qForwardUnregisteredStaticPorts, + gDot1qForwardUnregisteredForbiddenPorts, + gDot1qStaticUnicastAllowedToGoTo, + gDot1qStaticUnicastStatus, + gDot1qStaticMulticastStaticEgressPorts, + gDot1qStaticMulticastForbiddenEgressPorts, + gDot1qStaticMulticastStatus, + gDot1qVlanNumDeletes, + gDot1qVlanFdbId, + gDot1qVlanCurrentEgressPorts, + gDot1qVlanCurrentUntaggedPorts, + gDot1qVlanStatus, + gDot1qVlanCreationTime, + gDot1qVlanStaticName, + gDot1qVlanStaticEgressPorts, + gDot1qVlanForbiddenEgressPorts, + gDot1qVlanStaticUntaggedPorts, + gDot1qVlanStaticRowStatus, + gDot1qNextFreeLocalVlanIndex, + gDot1qPvid, + gDot1qPortAcceptableFrameTypes, + gDot1qPortIngressFiltering, + gDot1qPortGvrpStatus, + gDot1qPortGvrpFailedRegistrations, + gDot1qPortGvrpLastPduOrigin, + gDot1dPortGarpJoinTime, + gDot1dPortGarpLeaveTime, + gDot1dPortGarpLeaveAllTime, + gDot1dPortGmrpStatus, + gDot1dPortGmrpFailedRegistrations, + gDot1dPortGmrpLastPduOrigin, + gDot1dGmrpStatus, + gDot1qConstraintType, + gDot1qConstraintStatus, + gDot1qConstraintSetDefault, + gDot1qConstraintTypeDefault + } + STATUS current + DESCRIPTION + "GARP module groups." + ::= { garpMIBGroups 1 } + +-- ------------------------------------------------------------- +-- the gDot1qExtend group +-- ------------------------------------------------------------- +-- ------------------------------------------------------------- +-- the double tagging table +-- ------------------------------------------------------------- +gDot1qDoubleTagging OBJECT-TYPE + SYNTAX INTEGER{ + enabled(1), + disabled(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The global QinQ status" + --全局QinQ的状态 + ::= { gDot1qExtend 1 } + +gDot1qTpid OBJECT-TYPE + SYNTAX INTEGER(1..65535) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The tag protocol id of service provider, this value is used to + determine if a incoming packets is tagged and used when insert a + new tag" + --用于配置服务提供者的vlan协议号,用于判断端口是否为tagged或者是 + --为报文插入一个新的tag头时使用 + ::= { gDot1qExtend 2 } + +gDot1qDoubleTaggingTable OBJECT-TYPE + SYNTAX SEQUENCE OF GarpDot1qDoubleTaggingEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table is used to config the double tagging function." + --该表用于配置双tag头相关的功能. + ::= { gDot1qExtend 3 } + +gDot1qDoubleTaggingEntry OBJECT-TYPE + SYNTAX GarpDot1qDoubleTaggingEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Information about double tagging table entry." + --双tag表项 + INDEX { gDot1qDoubleTaggingPort } + ::= { gDot1qDoubleTaggingTable 1 } + +GarpDot1qDoubleTaggingEntry ::= + SEQUENCE { + gDot1qDoubleTaggingPort + INTEGER, + gDot1qDoubleTaggingMode + INTEGER, + gDot1qPortInnerTpid + INTEGER, + gDot1qPortOuterTpid + INTEGER + } + +gDot1qDoubleTaggingPort OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The index of double tagging entry." + --双tag表的索引 + ::= { gDot1qDoubleTaggingEntry 1 } + +gDot1qDoubleTaggingMode OBJECT-TYPE + SYNTAX INTEGER{ + dtagModeNone(0), + dtagModeInternal(1), + dtagModeExternal(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Port's 8021q-in-8021q mode: + dtagModeNone means QinQ is disabled; + dtagModeInternal means incoming pkt's will be inserted a tag + if it has no tag or its' tag-id doesn't match that of the port. + dtagModeExternal means incoming pkt's tag is always be ignored + and a new tag is inserted." + --配置端口的QinQ模式，dtagModeNone为关闭端口的QinQ，dtagModeInternal只有 + --vlan协议号与端口的配置不同时才在报文中插入新的tag头，dtagModeExternal意 + --味着端口总是忽略报文的tag属性而为报文新添一个tag头 + ::= { gDot1qDoubleTaggingEntry 2 } + +gDot1qPortInnerTpid OBJECT-TYPE + SYNTAX INTEGER(1..65535) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Used to change the original tag's(i.e.customer tag) tpid of packet when dtag enabled." + --双tag使能时,用于配置报文原始tag头的tpid + ::= { gDot1qDoubleTaggingEntry 3 } + +gDot1qPortOuterTpid OBJECT-TYPE + SYNTAX INTEGER(1..65535) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Used to change the new tag's(i.e.service-provider tag) tpid of packet when dtag enabled." + --双tag使能时,用于配置报文新tag头的tpid + ::= { gDot1qDoubleTaggingEntry 4 } + +gDot1qInnerTpid OBJECT-TYPE + SYNTAX INTEGER(1..65535) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Used to change the original tag's(i.e.customer tag) tpid of packet when dtag enabled." + --双tag使能时,用于配置报文原始tag头的tpid + ::= { gDot1qExtend 4 } +-- ------------------------------------------------------------- +-- the current VLAN MAC Table +-- ------------------------------------------------------------- +gDot1qVlanMacTable OBJECT-TYPE + SYNTAX SEQUENCE OF GarpDot1qVlanMacEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table is used to assign a VLAN ID for a packet based on + the source MAC Address. If an entry is found, then the VLAN + ID, PRIORITY of vlan mac table will be used for the packet." + --该表用于基于报文的源MAC地址为报文添加一个tag头，如果找到匹配的表 + --项，那么VLAN MAC表的vlan id以及优先级就会被添加到报文上. + ::= { gDot1qExtend 5 } + +gDot1qVlanMacEntry OBJECT-TYPE + SYNTAX GarpDot1qVlanMacEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Information about a vlan mac table entry." + --vlan mac表项的信息 + INDEX { gDot1qVlanMacAddress } + ::= { gDot1qVlanMacTable 1 } + +GarpDot1qVlanMacEntry ::= + SEQUENCE { + gDot1qVlanMacAddress + MacAddress, + gDot1qVlanMacNewVlanId + INTEGER, + gDot1qVlanMacNewPriority + INTEGER, + gDot1qVlanMacStatus + INTEGER + } + +gDot1qVlanMacAddress OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The index of vlan mac table entry." + --vlan mac表的索引 + ::= { gDot1qVlanMacEntry 1 } + +gDot1qVlanMacNewVlanId OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Vlan id to be assigned to the packet." + --将要为报文添加的vlan id + ::= { gDot1qVlanMacEntry 2 } + +gDot1qVlanMacNewPriority OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Priority to be assigned to the packet." + --将要为报文添加的优先级 + ::= { gDot1qVlanMacEntry 3 } + +gDot1qVlanMacStatus OBJECT-TYPE + SYNTAX INTEGER { + active(1), + createAndGo(2), + destroy(3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "table entry status." + --表项的状态 + ::= { gDot1qVlanMacEntry 4 } +-- ------------------------------------------------------------- +-- the current VLAN SUBNET Table +-- ------------------------------------------------------------- +gDot1qVlanSubnetTable OBJECT-TYPE + SYNTAX SEQUENCE OF GarpDot1qVlanSubnetEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table is used to assign a VLAN ID for a packet based on + the source IP Address." + --该表用于基于报文的源ip为报文添加tag头 + ::= { gDot1qExtend 6 } + +gDot1qVlanSubnetEntry OBJECT-TYPE + SYNTAX GarpDot1qVlanSubnetEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Information about a vlan subnet table entry." + --vlan subnet表的表项信息 + INDEX { gDot1qVlanSubnetIpAddress, gDot1qVlanSubnetIpMask } + ::= { gDot1qVlanSubnetTable 1 } + +GarpDot1qVlanSubnetEntry ::= + SEQUENCE { + gDot1qVlanSubnetIpAddress + IpAddress, + gDot1qVlanSubnetIpMask + IpAddress, + gDot1qVlanSubnetNewVlanId + INTEGER, + gDot1qVlanSubnetNewPriority + INTEGER, + gDot1qVlanSubnetStatus + INTEGER + } + +gDot1qVlanSubnetIpAddress OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The first index of vlan subnet table entry." + --vlan subnet 表的第一个索引 + ::= { gDot1qVlanSubnetEntry 1 } + +gDot1qVlanSubnetIpMask OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The second index of vlan subnet table entry." + --vlan subnet 表的第二个索引 + ::= { gDot1qVlanSubnetEntry 2 } + +gDot1qVlanSubnetNewVlanId OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Vlan id to be assigned to the packet." + --将要为报文添加的vlan id + ::= { gDot1qVlanSubnetEntry 3 } + +gDot1qVlanSubnetNewPriority OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Priority to be assigned to the packet." + --将要添加给报文的优先级值 + ::= { gDot1qVlanSubnetEntry 4 } + +gDot1qVlanSubnetStatus OBJECT-TYPE + SYNTAX INTEGER { + active(1), + createAndGo(2), + destroy(3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "table entry status." + --表项的状态 + ::= { gDot1qVlanSubnetEntry 5 } +-- ------------------------------------------------------------- +-- the current VLAN PROTOCOL Table +-- ------------------------------------------------------------- +gDot1qVlanProtoTable OBJECT-TYPE + SYNTAX SEQUENCE OF GarpDot1qVlanProtoEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table is used to assign a VLAN for a packet based + on the protocol(FrameType,EtherType)and the ingress port." + --该表用于基于报文的协议字段为报文添加新的tag头 + ::= { gDot1qExtend 7 } + +gDot1qVlanProtoEntry OBJECT-TYPE + SYNTAX GarpDot1qVlanProtoEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Information about a vlan protocol table entry." + --基于协议的vlan表的表项 + INDEX { gDot1qVlanProtoFrameType, gDot1qVlanProtoEthertype, gDot1qVlanProtoPortId } + ::= { gDot1qVlanProtoTable 1 } + +GarpDot1qVlanProtoEntry ::= + SEQUENCE { + gDot1qVlanProtoFrameType + INTEGER, + gDot1qVlanProtoEthertype + INTEGER, + gDot1qVlanProtoPortId + INTEGER, + gDot1qVlanProtoNewVlanId + INTEGER, + gDot1qVlanProtoStatus + INTEGER + } + +gDot1qVlanProtoFrameType OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Frame type：the first index of vlan protocol entry." + --Frame type：基于协议的vlan表的第一个索引. + ::= { gDot1qVlanProtoEntry 1 } + +gDot1qVlanProtoEthertype OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Ether type：the second index of vlan protocol entry." + --Ether type：基于协议的vlan表的第二个索引. + ::= { gDot1qVlanProtoEntry 2 } + +gDot1qVlanProtoPortId OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Ingress, wthe third index of vlan protocol entry." + --报文的入端口,基于协议的vlan表的第三个索引 + ::= { gDot1qVlanProtoEntry 3 } + +gDot1qVlanProtoNewVlanId OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Vlan id to be assigned to packet." + --将要赋予报文的vlan id + ::= { gDot1qVlanProtoEntry 4 } + +gDot1qVlanProtoStatus OBJECT-TYPE + SYNTAX INTEGER { + active(1), + createAndGo(2), + destroy(3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "table entry status." + --表项的状态 + ::= { gDot1qVlanProtoEntry 5 } +-- ------------------------------------------------------------- +-- the current VLAN TRANSLATION Table +-- ------------------------------------------------------------- +gDot1qVlanTranslationTable OBJECT-TYPE + SYNTAX SEQUENCE OF GarpDot1qVlanTransEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table is used to to translate the VLAN ID of an incoming + tagged packet to another VLAN ID based on the ingress port and + incoming packet VLAN ID." + --该表用于基于报文的vlan号和入端口转换报文的vlan id + ::= { gDot1qExtend 8 } + +gDot1qVlanTransEntry OBJECT-TYPE + SYNTAX GarpDot1qVlanTransEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Information about a vlan translation table entry." + --vlan转换表的表项信息 + INDEX { gDot1qVlanTransVlanId, gDot1qVlanTransPortId } + ::= { gDot1qVlanTranslationTable 1 } + +GarpDot1qVlanTransEntry ::= + SEQUENCE { + gDot1qVlanTransVlanId + INTEGER, + gDot1qVlanTransPortId + INTEGER, + gDot1qVlanTransNewVlanId + INTEGER, + gDot1qVlanTransNewPriority + INTEGER, + gDot1qVlanTransStatus + INTEGER + } + +gDot1qVlanTransVlanId OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The first index of vlan translation table entry." + --vlan转换表项的第一个索引 + ::= { gDot1qVlanTransEntry 1 } + +gDot1qVlanTransPortId OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The second index of vlan translation table entry." + --vlan转换表项的第二个索引 + ::= { gDot1qVlanTransEntry 2 } + +gDot1qVlanTransNewVlanId OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The new vlan id to be assigned to the packet who match + a vlan translation table entry." + --转换后的报文的新的vlan id值 + ::= { gDot1qVlanTransEntry 3 } + +gDot1qVlanTransNewPriority OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The priority field of vlan translation table." + --VLAN转换表中的报文优先级字段 + ::= { gDot1qVlanTransEntry 4 } + +gDot1qVlanTransStatus OBJECT-TYPE + SYNTAX INTEGER { + active(1), + createAndGo(2), + destroy(3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "table entry status." + --表项的状态 + ::= { gDot1qVlanTransEntry 5 } +-- ------------------------------------------------------------- +-- gDot1qExtend other +-- ------------------------------------------------------------- +gDot1qVlanSubnetPrecede OBJECT-TYPE + SYNTAX INTEGER{ + true(1), + false(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Used to config whether the IP-Subnet Based VLAN has a higher + precedence than the MAC Based VLAN." + --用于配置是否基于ip的vlan比基于MAC的vlan具有更高的优先级 + ::= { gDot1qExtend 9 } + +gDot1qVlanTransEnable OBJECT-TYPE + SYNTAX INTEGER{ + true(1), + false(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Used to config current vlan-translation's status." + --vlan转换的使能开关 + ::= { gDot1qExtend 10 } + +-- ------------------------------------------------------------- +-- The Stack VLAN Database +-- ------------------------------------------------------------- +gDot1qStackVlanTable OBJECT-TYPE + SYNTAX SEQUENCE OF GarpDot1qStackVlanEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table containing stack vlan configuration information for + each stack vlan configured into the device by management." + --该表用于显示和配置Stack VLAN相关的信息. + ::={ gDot1qExtend 11 } + + gDot1qStackVlanEntry OBJECT-TYPE + SYNTAX GarpDot1qStackVlanEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Information controlling stack VLAN configuration for a port + on the device. This is indexed by port and end vlan id." + --Stack VLAN表项,以端口号和结束VLAN ID为索引. + INDEX { gDot1qStackVlanPort, gDot1qEndStackVlan } + ::= { gDot1qStackVlanTable 1 } + + GarpDot1qStackVlanEntry ::= + SEQUENCE { + gDot1qStackVlanPort + INTEGER, + gDot1qStartStackVlan + INTEGER, + gDot1qEndStackVlan + INTEGER, + gDot1qTargetStackVlan + INTEGER, + gDot1qStackVlanRowStatus + RowStatus + } + + gDot1qStackVlanPort OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The index of stack vlan." + --Stack VLAN的索引. + ::={ gDot1qStackVlanEntry 1 } + + gDot1qStartStackVlan OBJECT-TYPE + SYNTAX INTEGER (1..4095) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The start vlan of the serial vlans we want to insert a new vlan tag." + --Stack VLAN范围的起始VLAN ID. + ::={ gDot1qStackVlanEntry 2 } + + gDot1qEndStackVlan OBJECT-TYPE + SYNTAX INTEGER (1..4095) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The end vlan of the serial vlans we want to insert a new vlan tag." + --Stack VLAN范围的结束VLAN ID. + ::={ gDot1qStackVlanEntry 3 } + + gDot1qTargetStackVlan OBJECT-TYPE + SYNTAX INTEGER (1..4095) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The target vlan of the serial vlans we want to insert." + --要插入的目标VLAN ID. + ::={ gDot1qStackVlanEntry 4 } + + gDot1qStackVlanRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Describe the oprations for the entry:4-create 6-delete" + --设置Stack VLAN:4-添加 6-删除. + ::= { gDot1qStackVlanEntry 5 } + +-- ------------------------------------------------------------- +-- The VLAN Passthrough Database +-- ------------------------------------------------------------- +gDot1qVlanPassthroughTable OBJECT-TYPE + SYNTAX SEQUENCE OF GarpDot1qVlanPassthroughEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table containing vlan passthrough configuration information for + each vlan passthrough configured into the device by management." + --该表用于显示和配置VLAN透传相关的信息. + ::={ gDot1qExtend 12 } + + gDot1qVlanPassthroughEntry OBJECT-TYPE + SYNTAX GarpDot1qVlanPassthroughEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Information controlling VLAN passthrough configuration for a port + on the device. This is indexed by port and end vlan id." + --VLAN透传表项,以端口号和结束VLAN ID为索引. + INDEX { gDot1qPassthroughPort, gDot1qEndPassthroughVlan } + ::= { gDot1qVlanPassthroughTable 1 } + +GarpDot1qVlanPassthroughEntry ::= + SEQUENCE { + gDot1qPassthroughPort + INTEGER, + gDot1qStartPassthroughVlan + INTEGER, + gDot1qEndPassthroughVlan + INTEGER, + gDot1qPassthroughRowStatus + RowStatus + } + + gDot1qPassthroughPort OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The index of passthrough entry." + --VLAN透传的索引 + ::={ gDot1qVlanPassthroughEntry 1 } + + gDot1qStartPassthroughVlan OBJECT-TYPE + SYNTAX INTEGER (1..4095) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The start vlan of the serial vlans we want to passthrough." + --配置VLAN透传范围的起始VLAN + ::={ gDot1qVlanPassthroughEntry 2 } + + gDot1qEndPassthroughVlan OBJECT-TYPE + SYNTAX INTEGER (1..4095) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The end vlan of the serial vlans we want to passthrough. " + --配置VLAN透传范围的结束VLAN + ::={ gDot1qVlanPassthroughEntry 3 } + + gDot1qPassthroughRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Describe the oprations for the entry:4-create 6-delete." + --设置VLAN透传:4-添加 6-删除. + ::= { gDot1qVlanPassthroughEntry 4 } + +-- ------------------------------------------------------------- +-- The VLAN SWAP Database +-- ------------------------------------------------------------- + gDot1qVlanSwapTable OBJECT-TYPE + SYNTAX SEQUENCE OF GarpDot1qVlanSwapEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table containing vlan swap configuration information for + each vlan swap configured into the device by management." + --该表用于显示和配置VLAN交换相关的信息. + ::={ gDot1qExtend 13 } + + gDot1qVlanSwapEntry OBJECT-TYPE + SYNTAX GarpDot1qVlanSwapEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Information controlling VLAN swap configuration for a port + on the device. This is indexed by port and end vlan id." + --VLAN交换表项,以端口号和结束VLAN ID为索引. + INDEX { gDot1qVlanSwapPort, gDot1qEndSwapVlan } + ::= { gDot1qVlanSwapTable 1 } + + GarpDot1qVlanSwapEntry ::= + SEQUENCE { + gDot1qVlanSwapPort + INTEGER, + gDot1qStartSwapVlan + INTEGER, + gDot1qEndSwapVlan + INTEGER, + gDot1qTargetSwapVlan + INTEGER, + gDot1qVlanSwapRowStatus + RowStatus + } + + gDot1qVlanSwapPort OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The index of vlan swap entry." + --VLAN交换的索引 + ::={ gDot1qVlanSwapEntry 1 } + + gDot1qStartSwapVlan OBJECT-TYPE + SYNTAX INTEGER (1..4094) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The start vlan of the serial vlans we want to swap." + --配置VLAN交换范围的起始VLAN + ::={ gDot1qVlanSwapEntry 2 } + + gDot1qEndSwapVlan OBJECT-TYPE + SYNTAX INTEGER (1..4094) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The end vlan of the serial vlans we want to swap. " + --配置VLAN交换范围的结束VLAN + ::={ gDot1qVlanSwapEntry 3 } + + gDot1qTargetSwapVlan OBJECT-TYPE + SYNTAX INTEGER (1..4094) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The target vlan of the serial vlans we want to swap." + --要交换的目标VLAN ID. + ::={ gDot1qVlanSwapEntry 4 } + + gDot1qVlanSwapRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Describe the oprations for the entry:4-create 6-delete." + --设置VLAN交换:4-添加 6-删除. + ::= { gDot1qVlanSwapEntry 5 } + +---在marvell芯片中使用 +gDot1qProtocolVlan OBJECT IDENTIFIER ::= { gDot1qExtend 14 } + +gDot1qProtocolVlanTable OBJECT-TYPE + SYNTAX SEQUENCE OF GDot1qProtocolVlanEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table is used to classify a packet based on the protocol(FrameType,EtherType).only for marvell chip" + --该表用于基于报文的协议字段为报文进行分类，在marvell芯片中使用 + ::= { gDot1qProtocolVlan 1 } + +gDot1qProtocolVlanEntry OBJECT-TYPE + SYNTAX GDot1qProtocolVlanEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Information about a vlan protocol table entry." + --基于协议的vlan表的表项 + INDEX { protocolVlanTableIndex } + ::= { gDot1qProtocolVlanTable 1 } + +GDot1qProtocolVlanEntry ::= + SEQUENCE { + protocolVlanTableIndex + INTEGER, + protocolVlanTableEthertype + INTEGER, + protocolVlanTableProtocol + INTEGER, + protocolVlanTableStatus + RowStatus + } + +protocolVlanTableIndex OBJECT-TYPE + SYNTAX INTEGER(0..11) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "index of vlan protocol entry." + --基于协议的vlan表的索引. + ::= { gDot1qProtocolVlanEntry 1 } + +protocolVlanTableEthertype OBJECT-TYPE + SYNTAX INTEGER(0..65535) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "ether type of packet." + --报文的以太网类型. + ::= { gDot1qProtocolVlanEntry 2 } + +protocolVlanTableProtocol OBJECT-TYPE + SYNTAX INTEGER{ + ethernetv2(1), + non-snap-llc(2), + ethernetv2-non-snap-llc(3), + snap-llc(4), + ethernetv2-snap-llc(5), + non-snap-llc-snap-llc(6), + ethernetv2-non-snap-llc-snap-llc(7) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "protocol of packet.bit 0 is ethernetv2, bit 1 is non-snap-llc, bit 2 is snap-llc." + --报文的协议类型，位0表示ethernetv2，位1表示non-snap-llc，位2表示snap-llc + ::= { gDot1qProtocolVlanEntry 3 } + +protocolVlanTableStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "table entry status." + --表项的状态 + ::= { gDot1qProtocolVlanEntry 4 } + +gDot1qProtocolVlanActionTable OBJECT-TYPE + SYNTAX SEQUENCE OF GDot1qProtocolVlanActionEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table is used to assign a VLAN for a packet based + on the protocol(FrameType,EtherType)and the ingress port.only for marvell chip" + --该表用于基于报文的协议字段为报文添加新的tag头，在marvell芯片中使用 + ::= { gDot1qProtocolVlan 2 } + +gDot1qProtocolVlanActionEntry OBJECT-TYPE + SYNTAX GDot1qProtocolVlanActionEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Information about a vlan protocol aciton table entry." + --基于协议的vlan动作表的表项 + INDEX { protocolVlanAcitonTablePort, protocolVlanTableIndex} + ::= { gDot1qProtocolVlanActionTable 1 } + +GDot1qProtocolVlanActionEntry ::= + SEQUENCE { + protocolVlanAcitonTablePort + INTEGER, + protocolVlanActionTableNewVlan + VlanId, + protocolVlanActionTableStatus + RowStatus + } + +protocolVlanAcitonTablePort OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "port index." + --端口索引 + ::= { gDot1qProtocolVlanActionEntry 1 } + +protocolVlanActionTableNewVlan OBJECT-TYPE + SYNTAX VlanId + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "new vlan id of packet." + --报文新的VLAN号. + ::= { gDot1qProtocolVlanActionEntry 2 } + +protocolVlanActionTableStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "table entry status." + --表项的状态 + ::= { gDot1qProtocolVlanActionEntry 3 } + +gDot1qProtocolVlanAdminTable OBJECT-TYPE + SYNTAX SEQUENCE OF GDot1qProtocolVlanAdminEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table is used to enable assign a VLAN for a packet based + on the protocol(FrameType,EtherType)and the ingress port.only for marvell chip" + --该表用于使能基于报文的协议字段为报文添加新的tag头，在marvell芯片中使用 + ::= { gDot1qProtocolVlan 3 } + +gDot1qProtocolVlanAdminEntry OBJECT-TYPE + SYNTAX GDot1qProtocolVlanAdminEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Information about a vlan protocol admin table entry." + --使能基于协议的vlan表的表项 + INDEX { protocolVlanAdminTablePort } + ::= { gDot1qProtocolVlanAdminTable 1 } + +GDot1qProtocolVlanAdminEntry ::= + SEQUENCE { + protocolVlanAdminTablePort + INTEGER, + protocolVlanAdminTableEnable + TruthValue, + } + +protocolVlanAdminTablePort OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "port index." + --端口索引 + ::= { gDot1qProtocolVlanAdminEntry 1 } + +protocolVlanAdminTableEnable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "enable protocol-based vlan function of a port." + --使能端口的基于协议的VLAN功能. + ::= { gDot1qProtocolVlanAdminEntry 2 } + + +gDot1qTranslateVlan OBJECT IDENTIFIER ::= { gDot1qExtend 15 } + +gDot1qTranslateVlanIngressTable OBJECT-TYPE + SYNTAX SEQUENCE OF GDot1qTranslateVlanIngressEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table is used to classify a packet based on the protocol(FrameType,EtherType).only for marvell chip" + --替换vlan全局表项 + ::= { gDot1qTranslateVlan 1 } + + +gDot1qTranslateVlanIngressEntry OBJECT-TYPE + SYNTAX GDot1qTranslateVlanIngressEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "entry of ingress vlan translate." + --入口vlan替换表项 + INDEX { translateVlanIngressTableIndex } + ::= { gDot1qTranslateVlanIngressTable 1 } + +GDot1qTranslateVlanIngressEntry ::= + SEQUENCE { + translateVlanIngressTableIndex + INTEGER, + translateIngressTargetVlanID + INTEGER, + } + +translateVlanIngressTableIndex OBJECT-TYPE + SYNTAX INTEGER(1..4094) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "index of ingress vlan." + --入口VLAN 索引. + ::= { gDot1qTranslateVlanIngressEntry 1 } + +translateIngressTargetVlanID OBJECT-TYPE + SYNTAX INTEGER(0..4094) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Target vlan ID. + 0 means not set" + --目标vlan ID. 0:表示没有设置,不能将目标vlan与原vlan设置相同 + ::= { gDot1qTranslateVlanIngressEntry 2 } + +gDot1qTranslateVlanEgressTable OBJECT-TYPE + SYNTAX SEQUENCE OF GDot1qTranslateVlanEgressEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table is used to classify a packet based on the protocol(FrameType,EtherType).only for marvell chip" + --替换vlan全局表项 + ::= { gDot1qTranslateVlan 2 } + +gDot1qTranslateVlanEgressEntry OBJECT-TYPE + SYNTAX GDot1qTranslateVlanEgressEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "entry of Egress vlan translate." + --出口vlan替换表项 + INDEX { translateVlanEgressTableIndex } + ::= { gDot1qTranslateVlanEgressTable 1 } + +GDot1qTranslateVlanEgressEntry ::= + SEQUENCE { + translateVlanEgressTableIndex + INTEGER, + translateEgressTargetVlanID + INTEGER, + } +translateVlanEgressTableIndex OBJECT-TYPE + SYNTAX INTEGER(1..4094) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "index of Egress vlan." + --出口VLAN 索引. + ::= { gDot1qTranslateVlanEgressEntry 1 } + +translateEgressTargetVlanID OBJECT-TYPE + SYNTAX INTEGER(0..4094) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Target vlan ID. + 0 means not set" + --目标vlan ID. 0:表示没有设置,不能将目标vlan与原vlan设置相同 + ::= { gDot1qTranslateVlanEgressEntry 2 } + + + +gDot1qTranslateVlanPortTable OBJECT-TYPE + SYNTAX SEQUENCE OF GDot1qTranslateVlanPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "translate vlan port list" + --替换vlan端口开启列表 + ::= { gDot1qTranslateVlan 3 } + +gDot1qTranslateVlanPortEntry OBJECT-TYPE + SYNTAX GDot1qTranslateVlanPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "port entry of vlan translate." + --vlan替换端口使能表项 + INDEX { translateVlanTablePort } + ::= { gDot1qTranslateVlanPortTable 1 } + +GDot1qTranslateVlanPortEntry ::= + SEQUENCE { + translateVlanTablePort + INTEGER, + translateTargetVlanIngressTableEnable + TruthValue, + translateTargetVlanEgressTableEnable + TruthValue + } +translateVlanTablePort OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "port index." + --端口索引 + ::= { gDot1qTranslateVlanPortEntry 1 } + +translateTargetVlanIngressTableEnable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "enable ingress Translate vlan function of a port.1:enable;2:disable" + --使能入端口的VLAN替换功能 1表示使能，2表示禁止. + ::= { gDot1qTranslateVlanPortEntry 2 } + + translateTargetVlanEgressTableEnable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "enable Egress Translate vlan function of a port.1:enable;2:disable" + --使能出端口的VLAN替换功能 1表示使能，2表示禁止. + ::= { gDot1qTranslateVlanPortEntry 3 } + + +-- ------------------------------------------------------------- +-- GARP MIB - compliance statements +-- ------------------------------------------------------------- + +garpMIBCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement for the GARP module." + + MODULE + MANDATORY-GROUPS { + garpMIBBaseGroup + } + ::= { garpMIBCompliances 1 } + +END -- cgit v1.2.3