From 98a672123c7872f6b9b75a9a2b6bb3aea504de6a Mon Sep 17 00:00:00 2001 From: David Leutgeb Date: Tue, 5 Dec 2023 12:25:34 +0100 Subject: Initial commit --- MIBS/dlink/DLINKSW-PACKET-MONITOR-MIB | 579 ++++++++++++++++++++++++++++++++++ 1 file changed, 579 insertions(+) create mode 100644 MIBS/dlink/DLINKSW-PACKET-MONITOR-MIB (limited to 'MIBS/dlink/DLINKSW-PACKET-MONITOR-MIB') diff --git a/MIBS/dlink/DLINKSW-PACKET-MONITOR-MIB b/MIBS/dlink/DLINKSW-PACKET-MONITOR-MIB new file mode 100644 index 0000000..ef57169 --- /dev/null +++ b/MIBS/dlink/DLINKSW-PACKET-MONITOR-MIB @@ -0,0 +1,579 @@ +-- ***************************************************************** +-- DLINKSW-PACKET-MONITOR-MIB.mib : Packet Monitoring MIB +-- +-- Copyright (c) 2013 D-Link Corporation, all rights reserved. +-- +-- ***************************************************************** +DLINKSW-PACKET-MONITOR-MIB DEFINITIONS ::= BEGIN + + IMPORTS + MODULE-IDENTITY, + OBJECT-TYPE, + Unsigned32, + Integer32 + FROM SNMPv2-SMI + DisplayString, RowStatus + FROM SNMPv2-TC + MODULE-COMPLIANCE, OBJECT-GROUP + FROM SNMPv2-CONF + ifIndex, InterfaceIndexOrZero + FROM IF-MIB + VlanId + FROM Q-BRIDGE-MIB + + dlinkIndustrialCommon + FROM DLINK-ID-REC-MIB; + + dlinkSwPktMonitorMIB MODULE-IDENTITY + LAST-UPDATED "201407210000Z" + ORGANIZATION "D-Link Corp." + CONTACT-INFO + " D-Link Corporation + + Postal: No. 289, Sinhu 3rd Rd., Neihu District, + Taipei City 114, Taiwan, R.O.C + Tel: +886-2-66000123 + E-mail: tsd@dlink.com.tw + " + DESCRIPTION + "This MIB module defines objects for configuring Monitoring Traffic. + Acronyms and terminology: + SPAN (Switched Port Analyzer): Mirror network traffic for analysis + by a network analyzer. + Local-SPAN: The SPAN feature is local when the monitored ports are + all located on the same switch as the destination port. + RSPAN (Remote SPAN): Source ports and destination ports that are + distributed across multiple switches, allowing one to monitor + any destination port located on the RSPAN VLAN." + + REVISION "201407210000Z" + DESCRIPTION + "Added the dPktMonSessionSrcTxIfStgState for dPktMonSessionSrcTxIfTable." + + REVISION "201309270000Z" + DESCRIPTION + "Added the dPktMonSessionRowStatus for dPktMonSessionTable. + Modified the MAX-ACCESS(read-write to read-create) for + dPktMonSessionDestRemoteVlanId, dPktMonSessionSourceRemoteVlanId + and dPktMonSessionDestInterface in dPktMonSessionTable. + Added the dPktMonSessionDestRemoteReplaceVlanTable for supporting + egress per flow RSPAN VLAN replacement on a RSPAN source switch." + + REVISION "201303040000Z" + DESCRIPTION + "This is the first version of the MIB file." + + ::= { dlinkIndustrialCommon 12 } + +-- ----------------------------------------------------------------------------- + dPktMonMIBNotifications OBJECT IDENTIFIER ::= { dlinkSwPktMonitorMIB 0 } + dPktMonMIBObjects OBJECT IDENTIFIER ::= { dlinkSwPktMonitorMIB 1 } + dPktMonMIBConformance OBJECT IDENTIFIER ::= { dlinkSwPktMonitorMIB 2 } + +-- ----------------------------------------------------------------------------- +-- Monitor Session Management +-- ----------------------------------------------------------------------------- + dPktMonSessionTableCurrEntries OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the number of entries present in the dPktMonSessionTable." + ::= { dPktMonMIBObjects 1 } + + dPktMonSessionTable OBJECT-TYPE + SYNTAX SEQUENCE OF DPktMonSessionEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table to create a packet monitoring session, allowing + packets on source ports or VLAN to be monitored via a + destination port." + ::= { dPktMonMIBObjects 2 } + + dPktMonSessionEntry OBJECT-TYPE + SYNTAX DPktMonSessionEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry in the dPktMonSessionTable describes configuration + information about Packet Monitoring." + INDEX { dPktMonSessionID } + ::= { dPktMonSessionTable 1 } + + DPktMonSessionEntry ::= SEQUENCE { + dPktMonSessionID Integer32, + dPktMonSessionSessionType INTEGER, + dPktMonSessionDestRemoteVlanId Integer32, + dPktMonSessionSourceRemoteVlanId Integer32, + dPktMonSessionDestInterface InterfaceIndexOrZero, + dPktMonSessionRowStatus RowStatus + } + + dPktMonSessionID OBJECT-TYPE + SYNTAX Integer32 (1..80) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An index value that uniquely identifies the the packet + monitoring session associated with this information." + ::= { dPktMonSessionEntry 1 } + + dPktMonSessionSessionType OBJECT-TYPE + SYNTAX INTEGER { + none(0), + localSession(1), + remoteSourceSession(2), + remoteDestinationSession(3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " Indicates the session type of the entry. + none (0): + Indicates the entry is inactive. + localSession (1): + Indicates the entry is operating as Local-SPAN. + remoteSourceSession (2): + Indicates the entry is operating as an RSPAN source session, which + associates SPAN source ports or VLANs with a destination RSPAN VLAN. + remoteDestinationSession (3): + Indicates the entry is operating as an RSPAN destination session. + An RSPAN destination session associates an RSPAN VLAN with a + destination port." + ::= { dPktMonSessionEntry 2 } + + dPktMonSessionDestRemoteVlanId OBJECT-TYPE + SYNTAX Integer32 (0 | 2..4094) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Indicates the RSPAN VLAN ID on the RSPAN source session. + This object should be considered in conjunction with the + dPktMonSessionDestInterface. + When this object is set with valid VLAN ID (2 to 4094), the mirrored + packets are transmitted with an RSPAN VLAN tag from the destination + port. + If this object is set to 0, the destination RSPAN VLAN becomes + unspecified, then the mirrored traffic will be transmitted without + additional RSPAN VLAN tag." + ::= { dPktMonSessionEntry 3 } + + dPktMonSessionSourceRemoteVlanId OBJECT-TYPE + SYNTAX Integer32 (0 | 2..4094) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Set this object with valid VLAN ID (2 to 4094) for an RSPAN destination + session. + If this object is set to 0, the source RSPAN VLAN becomes + unspecified." + ::= { dPktMonSessionEntry 4 } + + dPktMonSessionDestInterface OBJECT-TYPE + SYNTAX InterfaceIndexOrZero + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Indicates the destination interface of the packet monitoring + session. Both physical ports and port channel are valid as + destination interfaces of monitor sessions. + A value of zero indicates that no interface is associated with + this monitoring session." + ::= { dPktMonSessionEntry 5 } + + dPktMonSessionRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The status of this conceptual row." + ::= { dPktMonSessionEntry 6 } + +-- ----------------------------------------------------------------------------- + dPktMonSessionSrcIfObjects OBJECT-IDENTITY + STATUS current + DESCRIPTION + "This object identifier represents the objects that are configured + the source interfaces for monitor sessions." + ::= { dPktMonMIBObjects 3 } + + dPktMonSessionSrcRxIfTable OBJECT-TYPE + SYNTAX SEQUENCE OF DPktMonSessionSrcRxIfEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table consists of a list of source interface on which the packets + received for packet monitor sessions. + The first index element identifies the dPktMonSessionEntry that a + source interface (indicated by second index element) for monitoring + receiving packets (dPktMonSessionSrcRxIfEntry) belongs to. An entry + is removed from this table when its corresponding dPktMonSessionEntry + is deleted. + For a monitor session, to add or delete a source receiving interface + by creating or removing an entry in this table. + The valid interface includes: physical port/port channel/vlan and cpu. + " + ::= { dPktMonSessionSrcIfObjects 1 } + + dPktMonSessionSrcRxIfEntry OBJECT-TYPE + SYNTAX DPktMonSessionSrcRxIfEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry in the dPktMonSessionSrcRxIfTable describes + the source interface on which the packets received for a monitor session." + INDEX { dPktMonSessionID, ifIndex } + ::= { dPktMonSessionSrcRxIfTable 1 } + + DPktMonSessionSrcRxIfEntry ::= SEQUENCE { + dPktMonSessionSrcRxIfRowStatus RowStatus + } + + dPktMonSessionSrcRxIfRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The status of this conceptual row. Use this object to add/remove + an interface for a monitor session." + ::= { dPktMonSessionSrcRxIfEntry 1 } + +-- ----------------------------------------------------------------------------- + dPktMonSessionSrcTxIfTable OBJECT-TYPE + SYNTAX SEQUENCE OF DPktMonSessionSrcTxIfEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table consists of a list of source interface on which the packets + transmitted for packet monitor sessions. + The first index element identifies the dPktMonSessionEntry that a + source interface (indicated by second index element) for monitoring + transmitting packets (dPktMonSessionSrcTxIfEntry) belongs to. An entry + is removed from this table when its corresponding dPktMonSessionEntry is + deleted. + For a monitor session, to add or delete a source transmitting interface + by creating or removing an entry in this table. + " + ::= { dPktMonSessionSrcIfObjects 2 } + + dPktMonSessionSrcTxIfEntry OBJECT-TYPE + SYNTAX DPktMonSessionSrcTxIfEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry in the dPktMonSessionSrcTxIfTable describes + the source interface on which the packets transmitted for a monitor session." + INDEX { dPktMonSessionID, ifIndex } + ::= { dPktMonSessionSrcTxIfTable 1 } + + DPktMonSessionSrcTxIfEntry ::= SEQUENCE { + dPktMonSessionSrcTxIfRowStatus RowStatus, + dPktMonSessionSrcTxIfStgState INTEGER + } + + dPktMonSessionSrcTxIfRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The status of this conceptual row. Use this object to add/remove + an interface for a monitor session." + ::= { dPktMonSessionSrcTxIfEntry 1 } + + dPktMonSessionSrcTxIfStgState OBJECT-TYPE + SYNTAX INTEGER { + no-care(1), + forwarding(2) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object indicates if the monitoring of the packets transmitted + on the interface will be affected by the interface's STG status. + 'no-care' - monitor the packets transmitted on the interface regardless + of the interface¡¯s STG status. + 'forwarding' - monitor the packets transmitted on the interface only when + the interface¡¯s all STGs status are forwarding." + DEFVAL { no-care } + ::= { dPktMonSessionSrcTxIfEntry 2 } + +-- ----------------------------------------------------------------------------- + dPktMonSessionSrcDropIfTable OBJECT-TYPE + SYNTAX SEQUENCE OF DPktMonSessionSrcDropIfEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table consists of a list of source interface to monitor the + packets which dropped on received port. + The first index element identifies the dPktMonSessionEntry that a + source interface (indicated by second index element) for monitoring + dropped packets (dPktMonSessionSrcDropIfTable) belongs to. An entry + is removed from this table when its corresponding dPktMonSessionEntry + is deleted. + For a monitor session, to add or delete a source interface + for monitoring dropped packets by creating or removing an entry in + this table. + " + ::= { dPktMonSessionSrcIfObjects 3 } + + dPktMonSessionSrcDropIfEntry OBJECT-TYPE + SYNTAX DPktMonSessionSrcDropIfEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry in the dPktMonSessionSrcDropIfTable describes + the source interface to monitor the packets which dropped on received port + for a monitor session." + INDEX { dPktMonSessionID, ifIndex } + ::= { dPktMonSessionSrcDropIfTable 1 } + + DPktMonSessionSrcDropIfEntry ::= SEQUENCE { + dPktMonSessionSrcDropIfRowStatus RowStatus + } + + dPktMonSessionSrcDropIfRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The status of this conceptual row. Use this object to add/remove + an interface for a port monitor session." + ::= { dPktMonSessionSrcDropIfEntry 1 } + +-- ----------------------------------------------------------------------------- +-- Configuring ACL for Monitor Session +-- ----------------------------------------------------------------------------- + dPktMonSessionSrcAclTable OBJECT-TYPE + SYNTAX SEQUENCE OF DPktMonSessionSrcAclEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table containing associations between ACL and monitor session." + ::= { dPktMonMIBObjects 4 } + + dPktMonSessionSrcAclEntry OBJECT-TYPE + SYNTAX DPktMonSessionSrcAclEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table entry representing an access list association to + a monitor session." + INDEX { dPktMonSessionID, dPktMonSessionSrcAclName } + ::= { dPktMonSessionSrcAclTable 1 } + + DPktMonSessionSrcAclEntry ::= SEQUENCE { + dPktMonSessionSrcAclName DisplayString, + dPktMonSessionSrcAclRowStatus RowStatus + } + dPktMonSessionSrcAclName OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..32)) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Indicates the name of an access list for flow based monitoring. + Multiple access lists can be monitored on a session at a time. " + ::= {dPktMonSessionSrcAclEntry 1} + + dPktMonSessionSrcAclRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The status of this conceptual row." + ::= { dPktMonSessionSrcAclEntry 2 } + +-- ----------------------------------------------------------------------------- +-- Configuring global RSPAN VLAN +-- ----------------------------------------------------------------------------- + dPktMonRspanVlanTable OBJECT-TYPE + SYNTAX SEQUENCE OF DPktMonRspanVlanEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table containing RSPAN VLAN information on the + VLANs which currently configured as RSPAN VLAN." + ::= { dPktMonMIBObjects 5 } + + dPktMonRspanVlanEntry OBJECT-TYPE + SYNTAX DPktMonRspanVlanEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry in the dPktMonRspanVlanTable indicates + the VLAN is configured as RSPAN VLAN. + An entry is created/removed when RSPAN VLAN is enabled + or disabled at the VLAN via CLI or by issuing appropriate + sets to this table using snmp." + INDEX { dPktMonRspanVlanId } + ::= { dPktMonRspanVlanTable 1 } + + DPktMonRspanVlanEntry ::= SEQUENCE { + dPktMonRspanVlanId VlanId, + dPktMonRspanVlanRowStatus RowStatus + } + + dPktMonRspanVlanId OBJECT-TYPE + SYNTAX VlanId + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The VLAN number. + When a VLAN is specified as an RSPAN VLAN, the MAC address + learning on the RSPAN VLAN is disabled." + ::= { dPktMonRspanVlanEntry 1 } + + dPktMonRspanVlanRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The status of this conceptual row." + ::= { dPktMonRspanVlanEntry 2 } + +-- ----------------------------------------------------------------------------- +-- Configuring Egress Replace RSPAN VLAN for Monitor Session +-- ----------------------------------------------------------------------------- + dPktMonSessionDestRemoteReplaceVlanTable OBJECT-TYPE + SYNTAX SEQUENCE OF DPktMonSessionDestRemoteReplaceVlanEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table containing associations between replace RSPAN VLAN egress + per flow and monitor session. + For a RSPAN source session, multiple flows of VLAN replacement can + be configured." + ::= { dPktMonMIBObjects 6 } + + dPktMonSessionDestRemoteReplaceVlanEntry OBJECT-TYPE + SYNTAX DPktMonSessionDestRemoteReplaceVlanEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table entry representing an access list and replace VLAN + association to a monitor session." + INDEX { dPktMonSessionID, dPktMonSessionDestRemoteAccessListName,dPktMonSessionDestRemoteReplaceVlanId } + ::= { dPktMonSessionDestRemoteReplaceVlanTable 1 } + + DPktMonSessionDestRemoteReplaceVlanEntry ::= SEQUENCE { + dPktMonSessionDestRemoteAccessListName DisplayString, + dPktMonSessionDestRemoteReplaceVlanId VlanId, + dPktMonSessionDestRemoteReplaceVlanRowStatus RowStatus + } + + dPktMonSessionDestRemoteAccessListName OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..32)) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Indicates the name of an access list for egress per flow RSPAN VLAN + replacement." + ::= {dPktMonSessionDestRemoteReplaceVlanEntry 1} + + dPktMonSessionDestRemoteReplaceVlanId OBJECT-TYPE + SYNTAX VlanId + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Indicates the VLAN ID used to replace RSPAN VLAN ID for the matched + flow of packets transmitted out from the destination interface on a + RSPAN source switch." + ::= {dPktMonSessionDestRemoteReplaceVlanEntry 2} + + dPktMonSessionDestRemoteReplaceVlanRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The status of this conceptual row." + ::= { dPktMonSessionDestRemoteReplaceVlanEntry 3 } + +-- ----------------------------------------------------------------------------- +-- MIB Conformance statements +-- ----------------------------------------------------------------------------- + dPktMonMIBCompliances OBJECT IDENTIFIER + ::= { dPktMonMIBConformance 1 } + + dPktMonMIBGroups OBJECT IDENTIFIER + ::= { dPktMonMIBConformance 2 } + + dPktMonMIBCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement for entities which implement the + DLINKSW-PACKET-MONITOR-MIB." + MODULE -- this module + MANDATORY-GROUPS { dPktMonBasicGroup } + + GROUP dPktMonRspanGroup + DESCRIPTION + "The group is required when the RSPAN is supported." + + GROUP dPktMonFlowBasedMirrorGroup + DESCRIPTION + "The group is required when the flow based mirror is supported." + + GROUP dPktMonMonitorDropPktGroup + DESCRIPTION + "The group is required when the monitoring dropped packets is supported." + + GROUP dPktMonDestRemoteReplaceVlanGroup + DESCRIPTION + "The group is required when the egress per flow RSPAN VLAN replacement is supported." + + ::= { dPktMonMIBCompliances 1 } + + dPktMonBasicGroup OBJECT-GROUP + OBJECTS { + dPktMonSessionTableCurrEntries, + dPktMonSessionDestInterface, + dPktMonSessionRowStatus, + dPktMonSessionSrcRxIfRowStatus, + dPktMonSessionSrcTxIfRowStatus + } + STATUS current + DESCRIPTION + "A collection of objects providing basic packet monitoring + configuration." + ::= { dPktMonMIBGroups 1 } + + dPktMonRspanGroup OBJECT-GROUP + OBJECTS { + dPktMonSessionSessionType, + dPktMonSessionDestRemoteVlanId, + dPktMonSessionSourceRemoteVlanId, + dPktMonRspanVlanRowStatus + } + STATUS current + DESCRIPTION + "A collection of objects providing RSPAN configuration." + ::= { dPktMonMIBGroups 2 } + + dPktMonFlowBasedMirrorGroup OBJECT-GROUP + OBJECTS { dPktMonSessionSrcAclRowStatus } + STATUS current + DESCRIPTION + "A collection of objects providing flow based mirroring + configuration." + ::= { dPktMonMIBGroups 3 } + + dPktMonMonitorDropPktGroup OBJECT-GROUP + OBJECTS { dPktMonSessionSrcDropIfRowStatus } + STATUS current + DESCRIPTION + "A collection of objects provides the configuration for monitoring + dropped packets on source interfaces. + " + ::= { dPktMonMIBGroups 4 } + + dPktMonDestRemoteReplaceVlanGroup OBJECT-GROUP + OBJECTS { dPktMonSessionDestRemoteReplaceVlanRowStatus } + STATUS current + DESCRIPTION + "A collection of objects provides the configuration for + performing egress per flow RSPAN VLAN replacement on a + RSPAN source switch." + ::= { dPktMonMIBGroups 5 } +END + + -- cgit v1.2.3